[PATCH v2 1/2] x86: queensbay: Return directly if IGD / SDVO were already disabled

[PATCH v2 1/2] x86: queensbay: Return directly if IGD / SDVO were already disabled

[Bin Meng]

Initialize 'igd' and 'sdvo' to NULL so that we just need to test
them against NULL later, to be compatible with that case that IGD
and SDVO devices were already in disabled state.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>

---

Changes in v2:
- Reword the commit message and add a comment in the codes

 arch/x86/cpu/queensbay/tnc.c | 20 +++++++++-----------
 1 file changed, 9 insertions(+), 11 deletions(-)

diff --git a/arch/x86/cpu/queensbay/tnc.c b/arch/x86/cpu/queensbay/tnc.c
index 782ed863fe..4a008622d1 100644
--- a/arch/x86/cpu/queensbay/tnc.c
+++ b/arch/x86/cpu/queensbay/tnc.c
@@ -18,19 +18,17 @@
 
 static int __maybe_unused disable_igd(void)
 {
-	struct udevice *igd, *sdvo;
+	struct udevice *igd = NULL;
+	struct udevice *sdvo = NULL;
 	int ret;
 
-	ret = dm_pci_bus_find_bdf(TNC_IGD, &igd);
-	if (ret)
-		return ret;
-	if (!igd)
-		return 0;
-
-	ret = dm_pci_bus_find_bdf(TNC_SDVO, &sdvo);
-	if (ret)
-		return ret;
-	if (!sdvo)
+	/*
+	 * In case the IGD and SDVO devices were already in disabled state,
+	 * we should return and not proceed any further.
+	 */
+	dm_pci_bus_find_bdf(TNC_IGD, &igd);
+	dm_pci_bus_find_bdf(TNC_SDVO, &sdvo);
+	if (!igd || !sdvo)
 		return 0;
 
 	/*
-- 
2.25.1

[PATCH v2 2/2] x86: crownbay: Use external graphics card by default

[Bin Meng]

The board routes the Integrated Graphics Device (IGD) to an LVDS
panel, which is less popular than a PCIe based graphics card.

Disable the IGD so that it does not show up in the PCI configuration
space as a VGA display controller, so we can use an external PCIe
graphics card with whatever cable we have.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
---

(no changes since v1)

 configs/crownbay_defconfig | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/configs/crownbay_defconfig b/configs/crownbay_defconfig
index 1208aad42f..d7ee0fe45e 100644
--- a/configs/crownbay_defconfig
+++ b/configs/crownbay_defconfig
@@ -8,9 +8,8 @@ CONFIG_MAX_CPUS=2
 CONFIG_DEFAULT_DEVICE_TREE="crownbay"
 CONFIG_VENDOR_INTEL=y
 CONFIG_TARGET_CROWNBAY=y
+CONFIG_DISABLE_IGD=y
 CONFIG_SMP=y
-CONFIG_HAVE_VGA_BIOS=y
-CONFIG_VGA_BIOS_ADDR=0xfffa0000
 CONFIG_GENERATE_PIRQ_TABLE=y
 CONFIG_GENERATE_MP_TABLE=y
 CONFIG_FIT=y
-- 
2.25.1

Re: [PATCH v2 1/2] x86: queensbay: Return directly if IGD / SDVO were already disabled

[Simon Glass]

On Mon, 2 Aug 2021 at 01:05, Bin Meng <bmeng.cn@gmail.com> wrote:
>
> Initialize 'igd' and 'sdvo' to NULL so that we just need to test
> them against NULL later, to be compatible with that case that IGD
> and SDVO devices were already in disabled state.
>
> Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
>
> ---
>
> Changes in v2:
> - Reword the commit message and add a comment in the codes
>
>  arch/x86/cpu/queensbay/tnc.c | 20 +++++++++-----------
>  1 file changed, 9 insertions(+), 11 deletions(-)

Reviewed-by: Simon Glass <sjg@chromium.org>

Re: [PATCH v2 1/2] x86: queensbay: Return directly if IGD / SDVO were already disabled

[Bin Meng]

On Mon, Aug 2, 2021 at 10:45 PM Simon Glass <sjg@chromium.org> wrote:
>
> On Mon, 2 Aug 2021 at 01:05, Bin Meng <bmeng.cn@gmail.com> wrote:
> >
> > Initialize 'igd' and 'sdvo' to NULL so that we just need to test
> > them against NULL later, to be compatible with that case that IGD
> > and SDVO devices were already in disabled state.
> >
> > Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
> >
> > ---
> >
> > Changes in v2:
> > - Reword the commit message and add a comment in the codes
> >
> >  arch/x86/cpu/queensbay/tnc.c | 20 +++++++++-----------
> >  1 file changed, 9 insertions(+), 11 deletions(-)
>
> Reviewed-by: Simon Glass <sjg@chromium.org>

applied to u-boot-x86, thanks!

Re: [PATCH v2 2/2] x86: crownbay: Use external graphics card by default

[Bin Meng]

On Mon, Aug 2, 2021 at 3:05 PM Bin Meng <bmeng.cn@gmail.com> wrote:
>
> The board routes the Integrated Graphics Device (IGD) to an LVDS
> panel, which is less popular than a PCIe based graphics card.
>
> Disable the IGD so that it does not show up in the PCI configuration
> space as a VGA display controller, so we can use an external PCIe
> graphics card with whatever cable we have.
>
> Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
> Reviewed-by: Simon Glass <sjg@chromium.org>
> ---
>
> (no changes since v1)
>
>  configs/crownbay_defconfig | 3 +--
>  1 file changed, 1 insertion(+), 2 deletions(-)
>

applied to u-boot-x86, thanks!