* [PATCH 0/4] Add vibration motor support to U-Boot
@ 2021-12-22 22:36 Samuel Dionne-Riel
2021-12-22 22:36 ` [PATCH 1/4] drivers: Introduce vibrator uclass Samuel Dionne-Riel
` (3 more replies)
0 siblings, 4 replies; 9+ messages in thread
From: Samuel Dionne-Riel @ 2021-12-22 22:36 UTC (permalink / raw)
To: u-boot; +Cc: Samuel Dionne-Riel
This series of patch adds support for vibration motors (often called
vibrators) to U-Boot.
The support adds the necessary plumbing to support SPL usage of
vibration motors. This can be used to vibrate the device, like a phone,
as early as possible during the boot process.
A `vibrator` command allows scripts, or customised boot commands, to
vibrate the device. This can be used to provide feedback to the end-user
about failure state, or boot stage.
An example use case of the command is, in a customized boot command, to
signify that an error happend, by synchronizing red LED flashes with a
few short vibrations.
Samuel Dionne-Riel (4):
drivers: Introduce vibrator uclass
vibrator: Add vibrator_gpio driver
cmd: Add vibrator command
pinephone_defconfig: Add gpio vibrator support
arch/sandbox/dts/test.dts | 10 ++
cmd/Kconfig | 10 ++
cmd/Makefile | 1 +
cmd/vibrator.c | 148 +++++++++++++++++++++++++++++
configs/pinephone_defconfig | 2 +
configs/sandbox_defconfig | 2 +
drivers/Kconfig | 2 +
drivers/Makefile | 1 +
drivers/vibrator/Kconfig | 37 ++++++++
drivers/vibrator/Makefile | 6 ++
drivers/vibrator/vibrator-uclass.c | 62 ++++++++++++
drivers/vibrator/vibrator_gpio.c | 122 ++++++++++++++++++++++++
include/dm/uclass-id.h | 1 +
include/vibrator.h | 87 +++++++++++++++++
test/dm/Makefile | 1 +
test/dm/vibrator.c | 97 +++++++++++++++++++
16 files changed, 589 insertions(+)
create mode 100644 cmd/vibrator.c
create mode 100644 drivers/vibrator/Kconfig
create mode 100644 drivers/vibrator/Makefile
create mode 100644 drivers/vibrator/vibrator-uclass.c
create mode 100644 drivers/vibrator/vibrator_gpio.c
create mode 100644 include/vibrator.h
create mode 100644 test/dm/vibrator.c
--
2.34.0
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH 1/4] drivers: Introduce vibrator uclass
2021-12-22 22:36 [PATCH 0/4] Add vibration motor support to U-Boot Samuel Dionne-Riel
@ 2021-12-22 22:36 ` Samuel Dionne-Riel
2021-12-28 8:34 ` Simon Glass
2022-01-28 22:39 ` Tom Rini
2021-12-22 22:36 ` [PATCH 2/4] vibrator: Add vibrator_gpio driver Samuel Dionne-Riel
` (2 subsequent siblings)
3 siblings, 2 replies; 9+ messages in thread
From: Samuel Dionne-Riel @ 2021-12-22 22:36 UTC (permalink / raw)
To: u-boot; +Cc: Samuel Dionne-Riel
Signed-off-by: Samuel Dionne-Riel <samuel@dionne-riel.com>
---
arch/sandbox/dts/test.dts | 10 +++
configs/sandbox_defconfig | 2 +
drivers/Kconfig | 2 +
drivers/Makefile | 1 +
drivers/vibrator/Kconfig | 21 +++++++
drivers/vibrator/Makefile | 5 ++
drivers/vibrator/vibrator-uclass.c | 62 +++++++++++++++++++
include/dm/uclass-id.h | 1 +
include/vibrator.h | 87 +++++++++++++++++++++++++++
test/dm/Makefile | 1 +
test/dm/vibrator.c | 97 ++++++++++++++++++++++++++++++
11 files changed, 289 insertions(+)
create mode 100644 drivers/vibrator/Kconfig
create mode 100644 drivers/vibrator/Makefile
create mode 100644 drivers/vibrator/vibrator-uclass.c
create mode 100644 include/vibrator.h
create mode 100644 test/dm/vibrator.c
diff --git a/arch/sandbox/dts/test.dts b/arch/sandbox/dts/test.dts
index 2cea4a43c8..3633b8fb9f 100644
--- a/arch/sandbox/dts/test.dts
+++ b/arch/sandbox/dts/test.dts
@@ -1608,6 +1608,16 @@
compatible = "sandbox,regmap_test";
};
};
+
+ vibrator_left {
+ compatible = "gpio-vibrator";
+ enable-gpios = <&gpio_a 1 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ vibrator_right {
+ compatible = "gpio-vibrator";
+ enable-gpios = <&gpio_a 2 0 GPIO_ACTIVE_HIGH>;
+ };
};
#include "sandbox_pmic.dtsi"
diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig
index c390afe9de..43f9972178 100644
--- a/configs/sandbox_defconfig
+++ b/configs/sandbox_defconfig
@@ -273,6 +273,8 @@ CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_USB_ETHER=y
CONFIG_USB_ETH_CDC=y
+CONFIG_VIBRATOR=y
+CONFIG_VIBRATOR_GPIO=y
CONFIG_DM_VIDEO=y
CONFIG_VIDEO_COPY=y
CONFIG_CONSOLE_ROTATION=y
diff --git a/drivers/Kconfig b/drivers/Kconfig
index b26ca8cf70..a15674f22c 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -134,6 +134,8 @@ source "drivers/usb/Kconfig"
source "drivers/ufs/Kconfig"
+source "drivers/vibrator/Kconfig"
+
source "drivers/video/Kconfig"
source "drivers/virtio/Kconfig"
diff --git a/drivers/Makefile b/drivers/Makefile
index 4e7cf28440..2290d4a5d8 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -29,6 +29,7 @@ obj-$(CONFIG_$(SPL_TPL_)RTC) += rtc/
obj-$(CONFIG_$(SPL_TPL_)SERIAL) += serial/
obj-$(CONFIG_$(SPL_TPL_)SPI) += spi/
obj-$(CONFIG_$(SPL_TPL_)TIMER) += timer/
+obj-$(CONFIG_$(SPL_TPL_)VIBRATOR) += vibrator/
obj-$(CONFIG_$(SPL_TPL_)VIRTIO) += virtio/
obj-$(CONFIG_$(SPL_)DM_MAILBOX) += mailbox/
obj-$(CONFIG_$(SPL_)REMOTEPROC) += remoteproc/
diff --git a/drivers/vibrator/Kconfig b/drivers/vibrator/Kconfig
new file mode 100644
index 0000000000..f988aa63b9
--- /dev/null
+++ b/drivers/vibrator/Kconfig
@@ -0,0 +1,21 @@
+menu "Vibrator Feedback Support"
+
+config VIBRATOR
+ bool "Enable vibration motor support"
+ depends on DM
+ help
+ Many boards have vibration motorss which can be used to signal status or
+ alerts. U-Boot provides a uclass API to implement this feature. Vibration
+ motor drivers can provide access to board-specific vibration motors. Use
+ of the device tree for configuration is encouraged.
+
+config SPL_VIBRATOR
+ bool "Enable vibration motor support in SPL"
+ depends on SPL && SPL_DM
+ help
+ The vibration motor subsystem adds a small amount of overhead to the image.
+ If this is acceptable and you have a need to use vibration motors in SPL,
+ enable this option. You will need to enable device tree in SPL
+ for this to work.
+
+endmenu
diff --git a/drivers/vibrator/Makefile b/drivers/vibrator/Makefile
new file mode 100644
index 0000000000..326838ff7a
--- /dev/null
+++ b/drivers/vibrator/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (c) 2021 Samuel Dionne-Riel <samuel@dionne-riel.com>
+
+obj-y += vibrator-uclass.o
diff --git a/drivers/vibrator/vibrator-uclass.c b/drivers/vibrator/vibrator-uclass.c
new file mode 100644
index 0000000000..ffb6522a19
--- /dev/null
+++ b/drivers/vibrator/vibrator-uclass.c
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2021 Samuel Dionne-Riel <samuel@dionne-riel.com>
+ * Copyright (c) 2015 Google, Inc
+ * Largely derived from `drivers/led/led-uclass.c`
+ * Original written by Simon Glass <sjg@chromium.org>
+ */
+
+#define LOG_CATEGORY UCLASS_VIBRATOR
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <vibrator.h>
+#include <dm/device-internal.h>
+#include <dm/root.h>
+#include <dm/uclass-internal.h>
+
+int vibrator_get_by_label(const char *label, struct udevice **devp)
+{
+ struct udevice *dev;
+ struct uclass *uc;
+ int ret;
+
+ ret = uclass_get(UCLASS_VIBRATOR, &uc);
+ if (ret)
+ return ret;
+ uclass_foreach_dev(dev, uc) {
+ struct vibrator_uc_plat *uc_plat = dev_get_uclass_plat(dev);
+
+ if (uc_plat->label && strcmp(label, uc_plat->label) == 0)
+ return uclass_get_device_tail(dev, 0, devp);
+ }
+
+ return -ENODEV;
+}
+
+int vibrator_set_state(struct udevice *dev, enum vibrator_state_t state)
+{
+ struct vibrator_ops *ops = vibrator_get_ops(dev);
+
+ if (!ops->set_state)
+ return -ENOSYS;
+
+ return ops->set_state(dev, state);
+}
+
+enum vibrator_state_t vibrator_get_state(struct udevice *dev)
+{
+ struct vibrator_ops *ops = vibrator_get_ops(dev);
+
+ if (!ops->get_state)
+ return -ENOSYS;
+
+ return ops->get_state(dev);
+}
+
+UCLASS_DRIVER(vibrator) = {
+ .id = UCLASS_VIBRATOR,
+ .name = "vibrator",
+ .per_device_plat_auto = sizeof(struct vibrator_uc_plat),
+};
diff --git a/include/dm/uclass-id.h b/include/dm/uclass-id.h
index 0e26e1d138..265369d07b 100644
--- a/include/dm/uclass-id.h
+++ b/include/dm/uclass-id.h
@@ -125,6 +125,7 @@ enum uclass_id {
UCLASS_USB_DEV_GENERIC, /* USB generic device */
UCLASS_USB_HUB, /* USB hub */
UCLASS_USB_GADGET_GENERIC, /* USB generic device */
+ UCLASS_VIBRATOR, /* Vibration feedback devices (phone vibration) */
UCLASS_VIDEO, /* Video or LCD device */
UCLASS_VIDEO_BRIDGE, /* Video bridge, e.g. DisplayPort to LVDS */
UCLASS_VIDEO_CONSOLE, /* Text console driver for video device */
diff --git a/include/vibrator.h b/include/vibrator.h
new file mode 100644
index 0000000000..9b04c7303a
--- /dev/null
+++ b/include/vibrator.h
@@ -0,0 +1,87 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2021 Samuel Dionne-Riel <samuel@dionne-riel.com>
+ * Copyright (c) 2015 Google, Inc
+ * Largely derived from `include/led.h`
+ * Original written by Simon Glass <sjg@chromium.org>
+ */
+
+#ifndef __VIBRATOR_H
+#define __VIBRATOR_H
+
+struct udevice;
+
+/**
+ * struct vibrator_uc_plat - Platform data the uclass stores about each device
+ *
+ * @label: VIBRATOR label
+ */
+struct vibrator_uc_plat {
+ const char *label;
+};
+
+/**
+ * struct vibrator_uc_priv - Private data the uclass stores about each device
+ *
+ * @period_ms: Flash period in milliseconds
+ */
+struct vibrator_uc_priv {
+ int period_ms;
+};
+
+enum vibrator_state_t {
+ VIBRATOR_STATE_OFF = 0,
+ VIBRATOR_STATE_ON = 1,
+ VIBRATOR_STATE_TOGGLE,
+
+ VIBRATOR_STATE_COUNT,
+};
+
+struct vibrator_ops {
+ /**
+ * set_state() - set the state of an VIBRATOR
+ *
+ * @dev: VIBRATOR device to change
+ * @state: VIBRATOR state to set
+ * @return 0 if OK, -ve on error
+ */
+ int (*set_state)(struct udevice *dev, enum vibrator_state_t state);
+
+ /**
+ * vibrator_get_state() - get the state of an VIBRATOR
+ *
+ * @dev: VIBRATOR device to change
+ * @return VIBRATOR state vibrator_state_t, or -ve on error
+ */
+ enum vibrator_state_t (*get_state)(struct udevice *dev);
+};
+
+#define vibrator_get_ops(dev) ((struct vibrator_ops *)(dev)->driver->ops)
+
+/**
+ * vibrator_get_by_label() - Find an VIBRATOR device by label
+ *
+ * @label: VIBRATOR label to look up
+ * @devp: Returns the associated device, if found
+ * @return 0 if found, -ENODEV if not found, other -ve on error
+ */
+int vibrator_get_by_label(const char *label, struct udevice **devp);
+
+/**
+ * vibrator_set_state() - set the state of an VIBRATOR
+ *
+ * @dev: VIBRATOR device to change
+ * @state: VIBRATOR state to set
+ * @return 0 if OK, -ve on error
+ */
+int vibrator_set_state(struct udevice *dev, enum vibrator_state_t state);
+
+/**
+ * vibrator_get_state() - get the state of an VIBRATOR
+ *
+ * @dev: VIBRATOR device to change
+ * @return VIBRATOR state vibrator_state_t, or -ve on error
+ */
+enum vibrator_state_t vibrator_get_state(struct udevice *dev);
+
+#endif
diff --git a/test/dm/Makefile b/test/dm/Makefile
index d46552fbf3..dffed0e7fc 100644
--- a/test/dm/Makefile
+++ b/test/dm/Makefile
@@ -106,6 +106,7 @@ obj-$(CONFIG_TEE) += tee.o
obj-$(CONFIG_TIMER) += timer.o
obj-$(CONFIG_DM_USB) += usb.o
obj-$(CONFIG_DM_VIDEO) += video.o
+obj-$(CONFIG_VIBRATOR) += vibrator.o
obj-$(CONFIG_VIRTIO_SANDBOX) += virtio.o
ifeq ($(CONFIG_WDT_GPIO)$(CONFIG_WDT_SANDBOX),yy)
obj-y += wdt.o
diff --git a/test/dm/vibrator.c b/test/dm/vibrator.c
new file mode 100644
index 0000000000..ab5b548431
--- /dev/null
+++ b/test/dm/vibrator.c
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2021 Samuel Dionne-Riel <samuel@dionne-riel.com>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <vibrator.h>
+#include <asm/gpio.h>
+#include <dm/test.h>
+#include <test/test.h>
+#include <test/ut.h>
+
+/* Base test of the vibrator uclass */
+static int dm_test_vibrator_base(struct unit_test_state *uts)
+{
+ struct udevice *dev;
+
+ ut_assertok(uclass_get_device(UCLASS_VIBRATOR, 0, &dev));
+ ut_assertok(uclass_get_device(UCLASS_VIBRATOR, 1, &dev));
+ ut_asserteq(-ENODEV, uclass_get_device(UCLASS_VIBRATOR, 2, &dev));
+
+ return 0;
+}
+DM_TEST(dm_test_vibrator_base, UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT);
+
+/* Test of the vibrator uclass using the vibrator_gpio driver */
+static int dm_test_vibrator_gpio(struct unit_test_state *uts)
+{
+ const int offset = 1;
+ struct udevice *dev, *gpio;
+
+ /*
+ * Check that we can manipulate a vibration motor. Vibrator 1 is connected to GPIO
+ * bank gpio_a, offset 1.
+ */
+ ut_assertok(uclass_get_device(UCLASS_VIBRATOR, 0, &dev));
+ ut_assertok(uclass_get_device(UCLASS_GPIO, 1, &gpio));
+ ut_asserteq(0, sandbox_gpio_get_value(gpio, offset));
+ ut_assertok(vibrator_set_state(dev, VIBRATOR_STATE_ON));
+ ut_asserteq(1, sandbox_gpio_get_value(gpio, offset));
+ ut_asserteq(VIBRATOR_STATE_ON, vibrator_get_state(dev));
+
+ ut_assertok(vibrator_set_state(dev, VIBRATOR_STATE_OFF));
+ ut_asserteq(0, sandbox_gpio_get_value(gpio, offset));
+ ut_asserteq(VIBRATOR_STATE_OFF, vibrator_get_state(dev));
+
+ return 0;
+}
+DM_TEST(dm_test_vibrator_gpio, UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT);
+
+/* Test that we can toggle vibration motors */
+static int dm_test_vibrator_toggle(struct unit_test_state *uts)
+{
+ const int offset = 1;
+ struct udevice *dev, *gpio;
+
+ /*
+ * Check that we can manipulate a vibration motor. Vibrator 1 is connected to GPIO
+ * bank gpio_a, offset 1.
+ */
+ ut_assertok(uclass_get_device(UCLASS_VIBRATOR, 0, &dev));
+ ut_assertok(uclass_get_device(UCLASS_GPIO, 1, &gpio));
+ ut_asserteq(0, sandbox_gpio_get_value(gpio, offset));
+ ut_assertok(vibrator_set_state(dev, VIBRATOR_STATE_TOGGLE));
+ ut_asserteq(1, sandbox_gpio_get_value(gpio, offset));
+ ut_asserteq(VIBRATOR_STATE_ON, vibrator_get_state(dev));
+
+ ut_assertok(vibrator_set_state(dev, VIBRATOR_STATE_TOGGLE));
+ ut_asserteq(0, sandbox_gpio_get_value(gpio, offset));
+ ut_asserteq(VIBRATOR_STATE_OFF, vibrator_get_state(dev));
+
+ return 0;
+}
+DM_TEST(dm_test_vibrator_toggle, UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT);
+
+/* Test obtaining a vibration motor by label */
+static int dm_test_vibrator_label(struct unit_test_state *uts)
+{
+ struct udevice *dev, *cmp;
+
+ ut_assertok(vibrator_get_by_label("vibrator_left", &dev));
+ ut_asserteq(1, device_active(dev));
+ ut_assertok(uclass_get_device(UCLASS_VIBRATOR, 0, &cmp));
+ ut_asserteq_ptr(dev, cmp);
+
+ ut_assertok(vibrator_get_by_label("vibrator_right", &dev));
+ ut_asserteq(1, device_active(dev));
+ ut_assertok(uclass_get_device(UCLASS_VIBRATOR, 1, &cmp));
+ ut_asserteq_ptr(dev, cmp);
+
+ ut_asserteq(-ENODEV, vibrator_get_by_label("doesnotexist", &dev));
+
+ return 0;
+}
+DM_TEST(dm_test_vibrator_label, UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT);
+
--
2.34.0
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH 2/4] vibrator: Add vibrator_gpio driver
2021-12-22 22:36 [PATCH 0/4] Add vibration motor support to U-Boot Samuel Dionne-Riel
2021-12-22 22:36 ` [PATCH 1/4] drivers: Introduce vibrator uclass Samuel Dionne-Riel
@ 2021-12-22 22:36 ` Samuel Dionne-Riel
2021-12-28 8:34 ` Simon Glass
2021-12-22 22:36 ` [PATCH 3/4] cmd: Add vibrator command Samuel Dionne-Riel
2021-12-22 22:36 ` [PATCH 4/4] pinephone_defconfig: Add gpio vibrator support Samuel Dionne-Riel
3 siblings, 1 reply; 9+ messages in thread
From: Samuel Dionne-Riel @ 2021-12-22 22:36 UTC (permalink / raw)
To: u-boot; +Cc: Samuel Dionne-Riel
Signed-off-by: Samuel Dionne-Riel <samuel@dionne-riel.com>
---
drivers/vibrator/Kconfig | 16 ++++
drivers/vibrator/Makefile | 1 +
drivers/vibrator/vibrator_gpio.c | 122 +++++++++++++++++++++++++++++++
3 files changed, 139 insertions(+)
create mode 100644 drivers/vibrator/vibrator_gpio.c
diff --git a/drivers/vibrator/Kconfig b/drivers/vibrator/Kconfig
index f988aa63b9..88e84ffb6c 100644
--- a/drivers/vibrator/Kconfig
+++ b/drivers/vibrator/Kconfig
@@ -18,4 +18,20 @@ config SPL_VIBRATOR
enable this option. You will need to enable device tree in SPL
for this to work.
+config VIBRATOR_GPIO
+ bool "VIBRATOR support for GPIO-connected VIBRATORs"
+ depends on VIBRATOR && DM_GPIO
+ help
+ Enable support for vibration motors which are connected to GPIO lines.
+ These GPIOs may be on the SoC or some other device which provides GPIOs.
+ The GPIO driver must used driver model. vibration motors are configured
+ using the device tree.
+
+config SPL_VIBRATOR_GPIO
+ bool "Vibration motor support for GPIO-connected vibration motors in SPL"
+ depends on SPL_VIBRATOR && DM_GPIO
+ help
+ This option is an SPL-variant of the VIBRATOR_GPIO option.
+ See the help of VIBRATOR_GPIO for details.
+
endmenu
diff --git a/drivers/vibrator/Makefile b/drivers/vibrator/Makefile
index 326838ff7a..cc5fc14fbf 100644
--- a/drivers/vibrator/Makefile
+++ b/drivers/vibrator/Makefile
@@ -3,3 +3,4 @@
# Copyright (c) 2021 Samuel Dionne-Riel <samuel@dionne-riel.com>
obj-y += vibrator-uclass.o
+obj-$(CONFIG_$(SPL_)VIBRATOR_GPIO) += vibrator_gpio.o
diff --git a/drivers/vibrator/vibrator_gpio.c b/drivers/vibrator/vibrator_gpio.c
new file mode 100644
index 0000000000..95648a7231
--- /dev/null
+++ b/drivers/vibrator/vibrator_gpio.c
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2021 Samuel Dionne-Riel <samuel@dionne-riel.com>
+ * Copyright (c) 2015 Google, Inc
+ * Largely derived from `drivers/led/led_gpio.c`
+ * Original written by Simon Glass <sjg@chromium.org>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <vibrator.h>
+#include <log.h>
+#include <malloc.h>
+#include <asm/gpio.h>
+#include <dm/lists.h>
+
+struct vibrator_gpio_priv {
+ struct gpio_desc gpio;
+};
+
+static int gpio_vibrator_set_state(struct udevice *dev, enum vibrator_state_t state)
+{
+ struct vibrator_gpio_priv *priv = dev_get_priv(dev);
+ int ret;
+
+ if (!dm_gpio_is_valid(&priv->gpio))
+ return -EREMOTEIO;
+ switch (state) {
+ case VIBRATOR_STATE_OFF:
+ case VIBRATOR_STATE_ON:
+ break;
+ case VIBRATOR_STATE_TOGGLE:
+ ret = dm_gpio_get_value(&priv->gpio);
+ if (ret < 0)
+ return ret;
+ state = !ret;
+ break;
+ default:
+ return -ENOSYS;
+ }
+
+ return dm_gpio_set_value(&priv->gpio, state);
+}
+
+static enum vibrator_state_t gpio_vibrator_get_state(struct udevice *dev)
+{
+ struct vibrator_gpio_priv *priv = dev_get_priv(dev);
+ int ret;
+
+ if (!dm_gpio_is_valid(&priv->gpio))
+ return -EREMOTEIO;
+ ret = dm_gpio_get_value(&priv->gpio);
+ if (ret < 0)
+ return ret;
+
+ return ret ? VIBRATOR_STATE_ON : VIBRATOR_STATE_OFF;
+}
+
+static int vibrator_gpio_probe(struct udevice *dev)
+{
+ struct vibrator_gpio_priv *priv = dev_get_priv(dev);
+ int ret;
+
+ ret = gpio_request_by_name(dev, "enable-gpios", 0, &priv->gpio, GPIOD_IS_OUT);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int vibrator_gpio_remove(struct udevice *dev)
+{
+ /*
+ * The GPIO driver may have already been removed. We will need to
+ * address this more generally.
+ */
+ if (!IS_ENABLED(CONFIG_SANDBOX)) {
+ struct vibrator_gpio_priv *priv = dev_get_priv(dev);
+
+ if (dm_gpio_is_valid(&priv->gpio))
+ dm_gpio_free(dev, &priv->gpio);
+ }
+
+ return 0;
+}
+
+static int vibrator_gpio_bind(struct udevice *dev)
+{
+ ofnode node;
+ struct vibrator_uc_plat *uc_plat;
+ const char *label;
+
+ node = dev_ofnode(dev);
+ label = ofnode_get_name(node);
+
+ uc_plat = dev_get_uclass_plat(dev);
+ uc_plat->label = label;
+
+ return 0;
+}
+
+static const struct vibrator_ops gpio_vibrator_ops = {
+ .set_state = gpio_vibrator_set_state,
+ .get_state = gpio_vibrator_get_state,
+};
+
+static const struct udevice_id vibrator_gpio_ids[] = {
+ { .compatible = "gpio-vibrator" },
+ { }
+};
+
+U_BOOT_DRIVER(vibrator_gpio) = {
+ .name = "gpio_vibrator",
+ .id = UCLASS_VIBRATOR,
+ .of_match = vibrator_gpio_ids,
+ .ops = &gpio_vibrator_ops,
+ .priv_auto = sizeof(struct vibrator_gpio_priv),
+ .bind = vibrator_gpio_bind,
+ .probe = vibrator_gpio_probe,
+ .remove = vibrator_gpio_remove,
+};
--
2.34.0
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH 3/4] cmd: Add vibrator command
2021-12-22 22:36 [PATCH 0/4] Add vibration motor support to U-Boot Samuel Dionne-Riel
2021-12-22 22:36 ` [PATCH 1/4] drivers: Introduce vibrator uclass Samuel Dionne-Riel
2021-12-22 22:36 ` [PATCH 2/4] vibrator: Add vibrator_gpio driver Samuel Dionne-Riel
@ 2021-12-22 22:36 ` Samuel Dionne-Riel
2021-12-28 8:34 ` Simon Glass
2021-12-22 22:36 ` [PATCH 4/4] pinephone_defconfig: Add gpio vibrator support Samuel Dionne-Riel
3 siblings, 1 reply; 9+ messages in thread
From: Samuel Dionne-Riel @ 2021-12-22 22:36 UTC (permalink / raw)
To: u-boot; +Cc: Samuel Dionne-Riel
Signed-off-by: Samuel Dionne-Riel <samuel@dionne-riel.com>
---
cmd/Kconfig | 10 ++++
cmd/Makefile | 1 +
cmd/vibrator.c | 148 +++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 159 insertions(+)
create mode 100644 cmd/vibrator.c
diff --git a/cmd/Kconfig b/cmd/Kconfig
index e538e69a11..51e79ad806 100644
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -1391,6 +1391,16 @@ config CMD_PVBLOCK
help
Xen para-virtualized block device support
+config CMD_VIBRATOR
+ bool "vibrator"
+ depends on VIBRATOR
+ default y if VIBRATOR
+ help
+ Enable the 'vibrator' command which allows for control of vibrator
+ motors available on the board. The vibrator motors can be listed with
+ 'vibrator list' and controlled with vibrator on/off/time. Any
+ vibrator driver can be controlled with this command.
+
config CMD_VIRTIO
bool "virtio"
depends on VIRTIO
diff --git a/cmd/Makefile b/cmd/Makefile
index 6c4db4ed2e..49bf184bd9 100644
--- a/cmd/Makefile
+++ b/cmd/Makefile
@@ -164,6 +164,7 @@ obj-$(CONFIG_CMD_UBIFS) += ubifs.o
obj-$(CONFIG_CMD_UNIVERSE) += universe.o
obj-$(CONFIG_CMD_UNLZ4) += unlz4.o
obj-$(CONFIG_CMD_UNZIP) += unzip.o
+obj-$(CONFIG_CMD_VIBRATOR) += vibrator.o
obj-$(CONFIG_CMD_VIRTIO) += virtio.o
obj-$(CONFIG_CMD_WDT) += wdt.o
obj-$(CONFIG_CMD_LZMADEC) += lzmadec.o
diff --git a/cmd/vibrator.c b/cmd/vibrator.c
new file mode 100644
index 0000000000..b77cb4867a
--- /dev/null
+++ b/cmd/vibrator.c
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2021 Samuel Dionne-Riel <samuel@dionne-riel.com>
+ * Copyright (c) 2017 Google, Inc
+ * Largely derived from `cmd/led.c`
+ * Original written by Simon Glass <sjg@chromium.org>
+ */
+
+#include <common.h>
+#include <command.h>
+#include <dm.h>
+#include <vibrator.h>
+#include <dm/uclass-internal.h>
+#include <linux/delay.h>
+
+static const char *const state_label[] = {
+ [VIBRATOR_STATE_OFF] = "off",
+ [VIBRATOR_STATE_ON] = "on",
+ [VIBRATOR_STATE_TOGGLE] = "toggle",
+};
+
+enum vibrator_state_t get_vibrator_cmd(char *var)
+{
+ int i;
+
+ for (i = 0; i < VIBRATOR_STATE_COUNT; i++) {
+ if (!strncmp(var, state_label[i], strlen(var)))
+ return i;
+ }
+
+ return -1;
+}
+
+static int show_vibrator_state(struct udevice *dev)
+{
+ int ret;
+
+ ret = vibrator_get_state(dev);
+ if (ret >= VIBRATOR_STATE_COUNT)
+ ret = -EINVAL;
+ if (ret >= 0)
+ printf("%s\n", state_label[ret]);
+
+ return ret;
+}
+
+static int list_vibrators(void)
+{
+ struct udevice *dev;
+ int ret;
+
+ for (uclass_find_first_device(UCLASS_VIBRATOR, &dev);
+ dev;
+ uclass_find_next_device(&dev)) {
+ struct vibrator_uc_plat *plat = dev_get_uclass_plat(dev);
+
+ if (!plat->label)
+ continue;
+ printf("%-15s ", plat->label);
+ if (device_active(dev)) {
+ ret = show_vibrator_state(dev);
+ if (ret < 0)
+ printf("Error %d\n", ret);
+ } else {
+ printf("<inactive>\n");
+ }
+ }
+
+ return 0;
+}
+
+int timed_vibration(struct udevice *dev, int duration_ms)
+{
+ int ret;
+
+ ret = vibrator_set_state(dev, VIBRATOR_STATE_ON);
+ if (ret < 0) {
+ printf("Vibrator operation failed (err=%d)\n", ret);
+ return CMD_RET_FAILURE;
+ }
+
+ udelay(duration_ms * 1000);
+
+ ret = vibrator_set_state(dev, VIBRATOR_STATE_OFF);
+ if (ret < 0) {
+ printf("Vibrator operation failed (err=%d)\n", ret);
+ return CMD_RET_FAILURE;
+ }
+
+ return CMD_RET_SUCCESS;
+}
+
+int do_vibrator(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
+{
+ enum vibrator_state_t cmd;
+ const char *vibrator_label;
+ struct udevice *dev;
+ int ret;
+ int duration_ms = 0;
+
+ /* Validate arguments */
+ if (argc < 2)
+ return CMD_RET_USAGE;
+ vibrator_label = argv[1];
+ if (strncmp(vibrator_label, "list", 4) == 0)
+ return list_vibrators();
+
+ cmd = argc > 2 ? get_vibrator_cmd(argv[2]) : VIBRATOR_STATE_COUNT;
+ ret = vibrator_get_by_label(vibrator_label, &dev);
+ if (ret) {
+ printf("Vibrator '%s' not found (err=%d)\n", vibrator_label, ret);
+ return CMD_RET_FAILURE;
+ }
+
+ if (strncmp(argv[2], "timed", 5) == 0) {
+ if (argc < 4)
+ return CMD_RET_USAGE;
+ duration_ms = dectoul(argv[3], NULL);
+
+ return timed_vibration(dev, duration_ms);
+ }
+
+ switch (cmd) {
+ case VIBRATOR_STATE_OFF:
+ case VIBRATOR_STATE_ON:
+ case VIBRATOR_STATE_TOGGLE:
+ ret = vibrator_set_state(dev, cmd);
+ break;
+ case VIBRATOR_STATE_COUNT:
+ printf("Vibrator '%s': ", vibrator_label);
+ ret = show_vibrator_state(dev);
+ break;
+ }
+ if (ret < 0) {
+ printf("Vibrator '%s' operation failed (err=%d)\n", vibrator_label, ret);
+ return CMD_RET_FAILURE;
+ }
+
+ return 0;
+}
+
+U_BOOT_CMD(vibrator, 4, 1, do_vibrator,
+ "manage vibration motors",
+ "<vibrator_label> on|off\tChange vibration motor state\n"
+ "vibrator <vibrator_label> timed <ms duration>\t\tVibrate for the given duration (will block)\n"
+ "vibrator <vibrator_label>\tGet vibration motor state\n"
+ "vibrator list\t\tShow a list of vibration motors"
+);
--
2.34.0
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH 4/4] pinephone_defconfig: Add gpio vibrator support
2021-12-22 22:36 [PATCH 0/4] Add vibration motor support to U-Boot Samuel Dionne-Riel
` (2 preceding siblings ...)
2021-12-22 22:36 ` [PATCH 3/4] cmd: Add vibrator command Samuel Dionne-Riel
@ 2021-12-22 22:36 ` Samuel Dionne-Riel
3 siblings, 0 replies; 9+ messages in thread
From: Samuel Dionne-Riel @ 2021-12-22 22:36 UTC (permalink / raw)
To: u-boot; +Cc: Samuel Dionne-Riel, Samuel Holland
Signed-off-by: Samuel Dionne-Riel <samuel@dionne-riel.com>
Cc: Samuel Holland <samuel@sholland.org>
---
configs/pinephone_defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/configs/pinephone_defconfig b/configs/pinephone_defconfig
index 9d39204a43..72aaa4ea94 100644
--- a/configs/pinephone_defconfig
+++ b/configs/pinephone_defconfig
@@ -16,3 +16,5 @@ CONFIG_LED_STATUS_GPIO=y
CONFIG_LED_STATUS0=y
CONFIG_LED_STATUS_BIT=114
CONFIG_LED_STATUS_STATE=2
+CONFIG_VIBRATOR=y
+CONFIG_VIBRATOR_GPIO=y
--
2.34.0
^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH 1/4] drivers: Introduce vibrator uclass
2021-12-22 22:36 ` [PATCH 1/4] drivers: Introduce vibrator uclass Samuel Dionne-Riel
@ 2021-12-28 8:34 ` Simon Glass
2022-01-28 22:39 ` Tom Rini
1 sibling, 0 replies; 9+ messages in thread
From: Simon Glass @ 2021-12-28 8:34 UTC (permalink / raw)
To: Samuel Dionne-Riel; +Cc: U-Boot Mailing List
On Wed, 22 Dec 2021 at 15:37, Samuel Dionne-Riel <samuel@dionne-riel.com> wrote:
>
> Signed-off-by: Samuel Dionne-Riel <samuel@dionne-riel.com>
> ---
> arch/sandbox/dts/test.dts | 10 +++
> configs/sandbox_defconfig | 2 +
> drivers/Kconfig | 2 +
> drivers/Makefile | 1 +
> drivers/vibrator/Kconfig | 21 +++++++
> drivers/vibrator/Makefile | 5 ++
> drivers/vibrator/vibrator-uclass.c | 62 +++++++++++++++++++
> include/dm/uclass-id.h | 1 +
> include/vibrator.h | 87 +++++++++++++++++++++++++++
> test/dm/Makefile | 1 +
> test/dm/vibrator.c | 97 ++++++++++++++++++++++++++++++
> 11 files changed, 289 insertions(+)
> create mode 100644 drivers/vibrator/Kconfig
> create mode 100644 drivers/vibrator/Makefile
> create mode 100644 drivers/vibrator/vibrator-uclass.c
> create mode 100644 include/vibrator.h
> create mode 100644 test/dm/vibrator.c
Reviewed-by: Simon Glass <sjg@chromium.org>
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 2/4] vibrator: Add vibrator_gpio driver
2021-12-22 22:36 ` [PATCH 2/4] vibrator: Add vibrator_gpio driver Samuel Dionne-Riel
@ 2021-12-28 8:34 ` Simon Glass
0 siblings, 0 replies; 9+ messages in thread
From: Simon Glass @ 2021-12-28 8:34 UTC (permalink / raw)
To: Samuel Dionne-Riel; +Cc: U-Boot Mailing List
Hi Samuel,
On Wed, 22 Dec 2021 at 15:37, Samuel Dionne-Riel <samuel@dionne-riel.com> wrote:
>
> Signed-off-by: Samuel Dionne-Riel <samuel@dionne-riel.com>
> ---
> drivers/vibrator/Kconfig | 16 ++++
> drivers/vibrator/Makefile | 1 +
> drivers/vibrator/vibrator_gpio.c | 122 +++++++++++++++++++++++++++++++
> 3 files changed, 139 insertions(+)
> create mode 100644 drivers/vibrator/vibrator_gpio.c
>
Reviewed-by: Simon Glass <sjg@chromium.org>
This is fine...but I suggest in future code it might be a good idea to
use log_msg_ret() when returning errors. This helps people figure out
where they came from.
Regards,
Simon
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 3/4] cmd: Add vibrator command
2021-12-22 22:36 ` [PATCH 3/4] cmd: Add vibrator command Samuel Dionne-Riel
@ 2021-12-28 8:34 ` Simon Glass
0 siblings, 0 replies; 9+ messages in thread
From: Simon Glass @ 2021-12-28 8:34 UTC (permalink / raw)
To: Samuel Dionne-Riel; +Cc: U-Boot Mailing List
Hi Samuel,
On Wed, 22 Dec 2021 at 15:37, Samuel Dionne-Riel <samuel@dionne-riel.com> wrote:
>
> Signed-off-by: Samuel Dionne-Riel <samuel@dionne-riel.com>
> ---
> cmd/Kconfig | 10 ++++
> cmd/Makefile | 1 +
> cmd/vibrator.c | 148 +++++++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 159 insertions(+)
> create mode 100644 cmd/vibrator.c
This looks fine but needs doc/usage and a simple test (see acpi.c for example).
Some nits below.
>
> diff --git a/cmd/Kconfig b/cmd/Kconfig
> index e538e69a11..51e79ad806 100644
> --- a/cmd/Kconfig
> +++ b/cmd/Kconfig
> @@ -1391,6 +1391,16 @@ config CMD_PVBLOCK
> help
> Xen para-virtualized block device support
>
> +config CMD_VIBRATOR
> + bool "vibrator"
> + depends on VIBRATOR
> + default y if VIBRATOR
> + help
> + Enable the 'vibrator' command which allows for control of vibrator
> + motors available on the board. The vibrator motors can be listed with
> + 'vibrator list' and controlled with vibrator on/off/time. Any
> + vibrator driver can be controlled with this command.
> +
> config CMD_VIRTIO
> bool "virtio"
> depends on VIRTIO
> diff --git a/cmd/Makefile b/cmd/Makefile
> index 6c4db4ed2e..49bf184bd9 100644
> --- a/cmd/Makefile
> +++ b/cmd/Makefile
> @@ -164,6 +164,7 @@ obj-$(CONFIG_CMD_UBIFS) += ubifs.o
> obj-$(CONFIG_CMD_UNIVERSE) += universe.o
> obj-$(CONFIG_CMD_UNLZ4) += unlz4.o
> obj-$(CONFIG_CMD_UNZIP) += unzip.o
> +obj-$(CONFIG_CMD_VIBRATOR) += vibrator.o
> obj-$(CONFIG_CMD_VIRTIO) += virtio.o
> obj-$(CONFIG_CMD_WDT) += wdt.o
> obj-$(CONFIG_CMD_LZMADEC) += lzmadec.o
> diff --git a/cmd/vibrator.c b/cmd/vibrator.c
> new file mode 100644
> index 0000000000..b77cb4867a
> --- /dev/null
> +++ b/cmd/vibrator.c
> @@ -0,0 +1,148 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (c) 2021 Samuel Dionne-Riel <samuel@dionne-riel.com>
> + * Copyright (c) 2017 Google, Inc
> + * Largely derived from `cmd/led.c`
> + * Original written by Simon Glass <sjg@chromium.org>
> + */
> +
> +#include <common.h>
> +#include <command.h>
> +#include <dm.h>
> +#include <vibrator.h>
> +#include <dm/uclass-internal.h>
> +#include <linux/delay.h>
> +
> +static const char *const state_label[] = {
> + [VIBRATOR_STATE_OFF] = "off",
> + [VIBRATOR_STATE_ON] = "on",
> + [VIBRATOR_STATE_TOGGLE] = "toggle",
> +};
> +
> +enum vibrator_state_t get_vibrator_cmd(char *var)
> +{
> + int i;
> +
> + for (i = 0; i < VIBRATOR_STATE_COUNT; i++) {
> + if (!strncmp(var, state_label[i], strlen(var)))
> + return i;
> + }
> +
> + return -1;
> +}
> +
> +static int show_vibrator_state(struct udevice *dev)
> +{
> + int ret;
> +
> + ret = vibrator_get_state(dev);
> + if (ret >= VIBRATOR_STATE_COUNT)
> + ret = -EINVAL;
> + if (ret >= 0)
> + printf("%s\n", state_label[ret]);
> +
> + return ret;
> +}
> +
> +static int list_vibrators(void)
> +{
> + struct udevice *dev;
> + int ret;
> +
> + for (uclass_find_first_device(UCLASS_VIBRATOR, &dev);
> + dev;
> + uclass_find_next_device(&dev)) {
struct uclass *uc;
uclass_id_foreach_dev(UCLASS_VIBRATOR, dev, uc)
> + struct vibrator_uc_plat *plat = dev_get_uclass_plat(dev);
> +
> + if (!plat->label)
> + continue;
> + printf("%-15s ", plat->label);
> + if (device_active(dev)) {
> + ret = show_vibrator_state(dev);
> + if (ret < 0)
> + printf("Error %d\n", ret);
> + } else {
> + printf("<inactive>\n");
> + }
> + }
> +
> + return 0;
> +}
> +
> +int timed_vibration(struct udevice *dev, int duration_ms)
> +{
> + int ret;
> +
> + ret = vibrator_set_state(dev, VIBRATOR_STATE_ON);
> + if (ret < 0) {
If (ret)
? Same below
> + printf("Vibrator operation failed (err=%d)\n", ret);
> + return CMD_RET_FAILURE;
> + }
> +
> + udelay(duration_ms * 1000);
> +
> + ret = vibrator_set_state(dev, VIBRATOR_STATE_OFF);
> + if (ret < 0) {
> + printf("Vibrator operation failed (err=%d)\n", ret);
> + return CMD_RET_FAILURE;
> + }
> +
> + return CMD_RET_SUCCESS;
> +}
> +
> +int do_vibrator(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
> +{
> + enum vibrator_state_t cmd;
> + const char *vibrator_label;
> + struct udevice *dev;
> + int ret;
> + int duration_ms = 0;
> +
> + /* Validate arguments */
> + if (argc < 2)
> + return CMD_RET_USAGE;
> + vibrator_label = argv[1];
> + if (strncmp(vibrator_label, "list", 4) == 0)
!strncmp
Same below
> + return list_vibrators();
> +
> + cmd = argc > 2 ? get_vibrator_cmd(argv[2]) : VIBRATOR_STATE_COUNT;
> + ret = vibrator_get_by_label(vibrator_label, &dev);
> + if (ret) {
> + printf("Vibrator '%s' not found (err=%d)\n", vibrator_label, ret);
> + return CMD_RET_FAILURE;
> + }
> +
> + if (strncmp(argv[2], "timed", 5) == 0) {
> + if (argc < 4)
> + return CMD_RET_USAGE;
> + duration_ms = dectoul(argv[3], NULL);
> +
> + return timed_vibration(dev, duration_ms);
> + }
> +
> + switch (cmd) {
> + case VIBRATOR_STATE_OFF:
> + case VIBRATOR_STATE_ON:
> + case VIBRATOR_STATE_TOGGLE:
> + ret = vibrator_set_state(dev, cmd);
> + break;
> + case VIBRATOR_STATE_COUNT:
> + printf("Vibrator '%s': ", vibrator_label);
> + ret = show_vibrator_state(dev);
> + break;
> + }
> + if (ret < 0) {
> + printf("Vibrator '%s' operation failed (err=%d)\n", vibrator_label, ret);
> + return CMD_RET_FAILURE;
> + }
> +
> + return 0;
> +}
> +
> +U_BOOT_CMD(vibrator, 4, 1, do_vibrator,
> + "manage vibration motors",
> + "<vibrator_label> on|off\tChange vibration motor state\n"
> + "vibrator <vibrator_label> timed <ms duration>\t\tVibrate for the given duration (will block)\n"
> + "vibrator <vibrator_label>\tGet vibration motor state\n"
> + "vibrator list\t\tShow a list of vibration motors"
> +);
> --
> 2.34.0
>
Regards,
Simon
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 1/4] drivers: Introduce vibrator uclass
2021-12-22 22:36 ` [PATCH 1/4] drivers: Introduce vibrator uclass Samuel Dionne-Riel
2021-12-28 8:34 ` Simon Glass
@ 2022-01-28 22:39 ` Tom Rini
1 sibling, 0 replies; 9+ messages in thread
From: Tom Rini @ 2022-01-28 22:39 UTC (permalink / raw)
To: Samuel Dionne-Riel, Simon Glass; +Cc: u-boot
[-- Attachment #1: Type: text/plain, Size: 1252 bytes --]
On Wed, Dec 22, 2021 at 05:36:04PM -0500, Samuel Dionne-Riel wrote:
> Signed-off-by: Samuel Dionne-Riel <samuel@dionne-riel.com>
> Reviewed-by: Simon Glass <sjg@chromium.org>
> ---
> arch/sandbox/dts/test.dts | 10 +++
> configs/sandbox_defconfig | 2 +
> drivers/Kconfig | 2 +
> drivers/Makefile | 1 +
> drivers/vibrator/Kconfig | 21 +++++++
> drivers/vibrator/Makefile | 5 ++
> drivers/vibrator/vibrator-uclass.c | 62 +++++++++++++++++++
> include/dm/uclass-id.h | 1 +
> include/vibrator.h | 87 +++++++++++++++++++++++++++
> test/dm/Makefile | 1 +
> test/dm/vibrator.c | 97 ++++++++++++++++++++++++++++++
> 11 files changed, 289 insertions(+)
> create mode 100644 drivers/vibrator/Kconfig
> create mode 100644 drivers/vibrator/Makefile
> create mode 100644 drivers/vibrator/vibrator-uclass.c
> create mode 100644 include/vibrator.h
> create mode 100644 test/dm/vibrator.c
I don't know how, but this is breaking the SDL-based test on sandbox for
me. It runs fine before, and then with this applied I get the "SDL
renderer does not exist" error message.
--
Tom
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 659 bytes --]
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2022-01-28 22:39 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-12-22 22:36 [PATCH 0/4] Add vibration motor support to U-Boot Samuel Dionne-Riel
2021-12-22 22:36 ` [PATCH 1/4] drivers: Introduce vibrator uclass Samuel Dionne-Riel
2021-12-28 8:34 ` Simon Glass
2022-01-28 22:39 ` Tom Rini
2021-12-22 22:36 ` [PATCH 2/4] vibrator: Add vibrator_gpio driver Samuel Dionne-Riel
2021-12-28 8:34 ` Simon Glass
2021-12-22 22:36 ` [PATCH 3/4] cmd: Add vibrator command Samuel Dionne-Riel
2021-12-28 8:34 ` Simon Glass
2021-12-22 22:36 ` [PATCH 4/4] pinephone_defconfig: Add gpio vibrator support Samuel Dionne-Riel
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.