All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jian-Hong Pan <jian-hong@endlessm.com>
To: Maxime Ripard <maxime@cerno.tech>
Cc: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>,
	Eric Anholt <eric@anholt.net>,
	dri-devel <dri-devel@lists.freedesktop.org>,
	linux-rpi-kernel@lists.infradead.org,
	bcm-kernel-feedback-list@broadcom.com,
	linux-arm-kernel@lists.infradead.org,
	Linux Kernel <linux-kernel@vger.kernel.org>,
	devicetree@vger.kernel.org, linux-clk@vger.kernel.org,
	linux-i2c@vger.kernel.org,
	Linux Upstreaming Team <linux@endlessm.com>
Subject: Re: [PATCH v2 00/91] drm/vc4: Support BCM2711 Display Pipelin
Date: Mon, 4 May 2020 14:35:08 +0800	[thread overview]
Message-ID: <CAPpJ_efvtVzb_hvoVOeaePh7UdE13wOiiGaDBH38cToB-yhkUg@mail.gmail.com> (raw)
In-Reply-To: <20200428162152.ztsqp7nxqbwqrm6r@gilmour.lan>

Maxime Ripard <maxime@cerno.tech> 於 2020年4月29日 週三 上午12:21寫道:
>
> Hi,
>
> On Mon, Apr 27, 2020 at 03:23:42PM +0800, Jian-Hong Pan wrote:
> > Hi Maxime,
> >
> > Thanks for your V2 patch series!  I'm testing it.
> >
> > This patch series is applied upon mainline kernel 5.7-rc2 cleanly and built.
> > System can boot into console text mode, but no graphic UI.
> >
> > Get the error in vc5_hdmi_phy_init(), and full dmesg is at [1]:
> >
> > [    5.587543] vc4_hdmi fef00700.hdmi: Unknown register ID 46
> > [    5.587700] debugfs: Directory 'fef00700.hdmi' with parent 'vc4-hdmi' already present!
> > [    5.588070] vc4_hdmi fef00700.hdmi: vc4-hdmi-hifi <-> fef00700.hdmi mapping ok
> > [    5.588076] vc4_hdmi fef00700.hdmi: ASoC: no DMI vendor name!
> > [    5.588263] vc4-drm gpu: bound fef00700.hdmi (ops vc4_hdmi_ops)
> > [    5.588299] vc4_hdmi fef05700.hdmi: Unknown register ID 46
> > [    5.588373] debugfs: Directory 'vc4-hdmi' with parent 'asoc' already present!
> > [    5.588673] vc4_hdmi fef05700.hdmi: vc4-hdmi-hifi <-> fef05700.hdmi mapping ok
> > [    5.588677] vc4_hdmi fef05700.hdmi: ASoC: no DMI vendor name!
> > [    5.588809] vc4-drm gpu: bound fef05700.hdmi (ops vc4_hdmi_ops)
> > [    5.588854] vc4-drm gpu: bound fe806000.vec (ops vc4_vec_ops)
> > [    5.588897] vc4-drm gpu: bound fe004000.txp (ops vc4_txp_ops)
> > [    5.588934] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops)
> > [    5.588990] vc4-drm gpu: bound fe206000.pixelvalve (ops vc4_crtc_ops)
> > [    5.589030] vc4-drm gpu: bound fe207000.pixelvalve (ops vc4_crtc_ops)
> > [    5.589074] vc4-drm gpu: bound fe20a000.pixelvalve (ops vc4_crtc_ops)
> > [    5.589106] vc4-drm gpu: bound fe216000.pixelvalve (ops vc4_crtc_ops)
> > [    5.589145] vc4-drm gpu: bound fec12000.pixelvalve (ops vc4_crtc_ops)
> > [    5.589294] checking generic (3e513000 6d8c00) vs hw (0 ffffffffffffffff)
> > [    5.589297] fb0: switching to vc4drmfb from simple
> > [    5.589433] Console: switching to colour dummy device 80x25
> > [    5.589481] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
> > [    5.589816] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 0
> > [    5.601079] ------------[ cut here ]------------
> > [    5.601095] WARNING: CPU: 2 PID: 127 at drivers/gpu/drm/vc4/vc4_hdmi_phy.c:413 vc5_hdmi_phy_init+0x7ac/0x2078
> > [    5.601097] Modules linked in:
> > [    5.601103] CPU: 2 PID: 127 Comm: kworker/2:1 Not tainted 5.7.0-rc2-00091-ga181df59a930 #7
> > [    5.601105] Hardware name: Raspberry Pi 4 Model B (DT)
> > [    5.601112] Workqueue: events deferred_probe_work_func
> > [    5.601116] pstate: 20000005 (nzCv daif -PAN -UAO)
> > [    5.601119] pc : vc5_hdmi_phy_init+0x7ac/0x2078
> > [    5.601123] lr : vc4_hdmi_encoder_enable+0x1b8/0x1ac0
> > [    5.601124] sp : ffff80001217b410
> > [    5.601126] x29: ffff80001217b410 x28: ffff0000ec6370f0
> > [    5.601129] x27: ffff0000f650d400 x26: 000000008a500000
> > [    5.601132] x25: ffff8000113b4ac0 x24: 0000000000002060
> > [    5.601135] x23: 000000000a500000 x22: 0000000000000300
> > [    5.601137] x21: 0000000008d9ee20 x20: ffff0000ec535080
> > [    5.601140] x19: 000000010989e7c0 x18: 0000000000000000
> > [    5.601142] x17: 0000000000000001 x16: 0000000000005207
> > [    5.601145] x15: 00004932ad293c92 x14: 0000000000000137
> > [    5.601147] x13: ffff800010015000 x12: 0000000000000001
> > [    5.601150] x11: 0000000000000001 x10: 0000000000000000
> > [    5.601152] x9 : 0000000000000000 x8 : ffff800010015038
> > [    5.601154] x7 : 0000000000000001 x6 : ffff80001217b368
> > [    5.601157] x5 : 0000000000000000 x4 : 000000000000004c
> > [    5.601159] x3 : 0000000000000000 x2 : ffff8000113b4ac0
> > [    5.601162] x1 : ffff8000120c5f44 x0 : 00000000dc8984ff
> > [    5.601164] Call trace:
> > [    5.601169]  vc5_hdmi_phy_init+0x7ac/0x2078
> > [    5.601172]  vc4_hdmi_encoder_enable+0x1b8/0x1ac0
> > [    5.601176]  drm_atomic_helper_commit_modeset_enables+0x224/0x248
> > [    5.601179]  vc4_atomic_complete_commit+0x400/0x558
> > [    5.601182]  vc4_atomic_commit+0x1e0/0x200
> > [    5.601185]  drm_atomic_commit+0x4c/0x60
> > [    5.601190]  drm_client_modeset_commit_atomic.isra.0+0x17c/0x238
> > [    5.601192]  drm_client_modeset_commit_locked+0x5c/0x198
> > [    5.601195]  drm_client_modeset_commit+0x30/0x58
> > [    5.601201]  drm_fb_helper_restore_fbdev_mode_unlocked+0x78/0xe0
> > [    5.601204]  drm_fb_helper_set_par+0x30/0x68
> > [    5.601208]  fbcon_init+0x3d4/0x598
> > [    5.601212]  visual_init+0xb0/0x108
> > [    5.601214]  do_bind_con_driver+0x1d0/0x3a8
> > [    5.601217]  do_take_over_console+0x144/0x208
> > [    5.601219]  do_fbcon_takeover+0x68/0xd8
> > [    5.601222]  fbcon_fb_registered+0x100/0x118
> > [    5.601226]  register_framebuffer+0x1f4/0x338
> > [    5.601229]  __drm_fb_helper_initial_config_and_unlock+0x2f8/0x4a0
> > [    5.601232]  drm_fbdev_client_hotplug+0xd4/0x1b0
> > [    5.601235]  drm_fbdev_generic_setup+0xb0/0x130
> > [    5.601238]  vc4_drm_bind+0x184/0x1a0
> > [    5.601241]  try_to_bring_up_master+0x168/0x1c8
> > [    5.601244]  __component_add+0xa4/0x170
> > [    5.601246]  component_add+0x14/0x20
> > [    5.601248]  vc4_vec_dev_probe+0x20/0x30
> > [    5.601252]  platform_drv_probe+0x54/0xa8
> > [    5.601254]  really_probe+0xd8/0x320
> > [    5.601256]  driver_probe_device+0x58/0xf0
> > [    5.601258]  __device_attach_driver+0x84/0xc8
> > [    5.601263]  bus_for_each_drv+0x78/0xc8
> > [    5.601265]  __device_attach+0xe4/0x140
> > [    5.601267]  device_initial_probe+0x14/0x20
> > [    5.601269]  bus_probe_device+0x9c/0xa8
> > [    5.601271]  deferred_probe_work_func+0x74/0xb0
> > [    5.601276]  process_one_work+0x1bc/0x338
> > [    5.601279]  worker_thread+0x1f8/0x428
> > [    5.601282]  kthread+0x138/0x158
> > [    5.601286]  ret_from_fork+0x10/0x1c
> > [    5.601288] ---[ end trace cfba0996218c3f3d ]---
>
> Thanks for testing!
>
> Do you have a bit more details regarding your setup? Was it connected to an
> external display?

Yes, the HDMI cable is connected to HDMI0 port on RPi 4.

> If so, do you know the resolution it was trying to setup?

According to the log, I think it is 1920x1080:
Apr 27 15:37:25 endless gdm-Xorg-:0[1960]: (II) modeset(0): Output
HDMI-1 connected
Apr 27 15:37:25 endless gdm-Xorg-:0[1960]: (II) modeset(0): Output
HDMI-2 disconnected
Apr 27 15:37:25 endless gdm-Xorg-:0[1960]: (II) modeset(0): Output
Composite-1 disconnected
Apr 27 15:37:25 endless gdm-Xorg-:0[1960]: (II) modeset(0): Using
exact sizes for initial modes
Apr 27 15:37:25 endless gdm-Xorg-:0[1960]: (II) modeset(0): Output
HDMI-1 using initial mode 1920x1080 +0+0

https://gist.github.com/starnight/45e1468bfa0426a54d2fb4a9269cfb94

Regards,
Jian-Hong Pan

WARNING: multiple messages have this Message-ID (diff)
From: Jian-Hong Pan <jian-hong@endlessm.com>
To: Maxime Ripard <maxime@cerno.tech>
Cc: devicetree@vger.kernel.org,
	Linux Kernel <linux-kernel@vger.kernel.org>,
	dri-devel <dri-devel@lists.freedesktop.org>,
	linux-i2c@vger.kernel.org, Eric Anholt <eric@anholt.net>,
	bcm-kernel-feedback-list@broadcom.com,
	Nicolas Saenz Julienne <nsaenzjulienne@suse.de>,
	Linux Upstreaming Team <linux@endlessm.com>,
	linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-rpi-kernel@lists.infradead.org
Subject: Re: [PATCH v2 00/91] drm/vc4: Support BCM2711 Display Pipelin
Date: Mon, 4 May 2020 14:35:08 +0800	[thread overview]
Message-ID: <CAPpJ_efvtVzb_hvoVOeaePh7UdE13wOiiGaDBH38cToB-yhkUg@mail.gmail.com> (raw)
In-Reply-To: <20200428162152.ztsqp7nxqbwqrm6r@gilmour.lan>

Maxime Ripard <maxime@cerno.tech> 於 2020年4月29日 週三 上午12:21寫道:
>
> Hi,
>
> On Mon, Apr 27, 2020 at 03:23:42PM +0800, Jian-Hong Pan wrote:
> > Hi Maxime,
> >
> > Thanks for your V2 patch series!  I'm testing it.
> >
> > This patch series is applied upon mainline kernel 5.7-rc2 cleanly and built.
> > System can boot into console text mode, but no graphic UI.
> >
> > Get the error in vc5_hdmi_phy_init(), and full dmesg is at [1]:
> >
> > [    5.587543] vc4_hdmi fef00700.hdmi: Unknown register ID 46
> > [    5.587700] debugfs: Directory 'fef00700.hdmi' with parent 'vc4-hdmi' already present!
> > [    5.588070] vc4_hdmi fef00700.hdmi: vc4-hdmi-hifi <-> fef00700.hdmi mapping ok
> > [    5.588076] vc4_hdmi fef00700.hdmi: ASoC: no DMI vendor name!
> > [    5.588263] vc4-drm gpu: bound fef00700.hdmi (ops vc4_hdmi_ops)
> > [    5.588299] vc4_hdmi fef05700.hdmi: Unknown register ID 46
> > [    5.588373] debugfs: Directory 'vc4-hdmi' with parent 'asoc' already present!
> > [    5.588673] vc4_hdmi fef05700.hdmi: vc4-hdmi-hifi <-> fef05700.hdmi mapping ok
> > [    5.588677] vc4_hdmi fef05700.hdmi: ASoC: no DMI vendor name!
> > [    5.588809] vc4-drm gpu: bound fef05700.hdmi (ops vc4_hdmi_ops)
> > [    5.588854] vc4-drm gpu: bound fe806000.vec (ops vc4_vec_ops)
> > [    5.588897] vc4-drm gpu: bound fe004000.txp (ops vc4_txp_ops)
> > [    5.588934] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops)
> > [    5.588990] vc4-drm gpu: bound fe206000.pixelvalve (ops vc4_crtc_ops)
> > [    5.589030] vc4-drm gpu: bound fe207000.pixelvalve (ops vc4_crtc_ops)
> > [    5.589074] vc4-drm gpu: bound fe20a000.pixelvalve (ops vc4_crtc_ops)
> > [    5.589106] vc4-drm gpu: bound fe216000.pixelvalve (ops vc4_crtc_ops)
> > [    5.589145] vc4-drm gpu: bound fec12000.pixelvalve (ops vc4_crtc_ops)
> > [    5.589294] checking generic (3e513000 6d8c00) vs hw (0 ffffffffffffffff)
> > [    5.589297] fb0: switching to vc4drmfb from simple
> > [    5.589433] Console: switching to colour dummy device 80x25
> > [    5.589481] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
> > [    5.589816] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 0
> > [    5.601079] ------------[ cut here ]------------
> > [    5.601095] WARNING: CPU: 2 PID: 127 at drivers/gpu/drm/vc4/vc4_hdmi_phy.c:413 vc5_hdmi_phy_init+0x7ac/0x2078
> > [    5.601097] Modules linked in:
> > [    5.601103] CPU: 2 PID: 127 Comm: kworker/2:1 Not tainted 5.7.0-rc2-00091-ga181df59a930 #7
> > [    5.601105] Hardware name: Raspberry Pi 4 Model B (DT)
> > [    5.601112] Workqueue: events deferred_probe_work_func
> > [    5.601116] pstate: 20000005 (nzCv daif -PAN -UAO)
> > [    5.601119] pc : vc5_hdmi_phy_init+0x7ac/0x2078
> > [    5.601123] lr : vc4_hdmi_encoder_enable+0x1b8/0x1ac0
> > [    5.601124] sp : ffff80001217b410
> > [    5.601126] x29: ffff80001217b410 x28: ffff0000ec6370f0
> > [    5.601129] x27: ffff0000f650d400 x26: 000000008a500000
> > [    5.601132] x25: ffff8000113b4ac0 x24: 0000000000002060
> > [    5.601135] x23: 000000000a500000 x22: 0000000000000300
> > [    5.601137] x21: 0000000008d9ee20 x20: ffff0000ec535080
> > [    5.601140] x19: 000000010989e7c0 x18: 0000000000000000
> > [    5.601142] x17: 0000000000000001 x16: 0000000000005207
> > [    5.601145] x15: 00004932ad293c92 x14: 0000000000000137
> > [    5.601147] x13: ffff800010015000 x12: 0000000000000001
> > [    5.601150] x11: 0000000000000001 x10: 0000000000000000
> > [    5.601152] x9 : 0000000000000000 x8 : ffff800010015038
> > [    5.601154] x7 : 0000000000000001 x6 : ffff80001217b368
> > [    5.601157] x5 : 0000000000000000 x4 : 000000000000004c
> > [    5.601159] x3 : 0000000000000000 x2 : ffff8000113b4ac0
> > [    5.601162] x1 : ffff8000120c5f44 x0 : 00000000dc8984ff
> > [    5.601164] Call trace:
> > [    5.601169]  vc5_hdmi_phy_init+0x7ac/0x2078
> > [    5.601172]  vc4_hdmi_encoder_enable+0x1b8/0x1ac0
> > [    5.601176]  drm_atomic_helper_commit_modeset_enables+0x224/0x248
> > [    5.601179]  vc4_atomic_complete_commit+0x400/0x558
> > [    5.601182]  vc4_atomic_commit+0x1e0/0x200
> > [    5.601185]  drm_atomic_commit+0x4c/0x60
> > [    5.601190]  drm_client_modeset_commit_atomic.isra.0+0x17c/0x238
> > [    5.601192]  drm_client_modeset_commit_locked+0x5c/0x198
> > [    5.601195]  drm_client_modeset_commit+0x30/0x58
> > [    5.601201]  drm_fb_helper_restore_fbdev_mode_unlocked+0x78/0xe0
> > [    5.601204]  drm_fb_helper_set_par+0x30/0x68
> > [    5.601208]  fbcon_init+0x3d4/0x598
> > [    5.601212]  visual_init+0xb0/0x108
> > [    5.601214]  do_bind_con_driver+0x1d0/0x3a8
> > [    5.601217]  do_take_over_console+0x144/0x208
> > [    5.601219]  do_fbcon_takeover+0x68/0xd8
> > [    5.601222]  fbcon_fb_registered+0x100/0x118
> > [    5.601226]  register_framebuffer+0x1f4/0x338
> > [    5.601229]  __drm_fb_helper_initial_config_and_unlock+0x2f8/0x4a0
> > [    5.601232]  drm_fbdev_client_hotplug+0xd4/0x1b0
> > [    5.601235]  drm_fbdev_generic_setup+0xb0/0x130
> > [    5.601238]  vc4_drm_bind+0x184/0x1a0
> > [    5.601241]  try_to_bring_up_master+0x168/0x1c8
> > [    5.601244]  __component_add+0xa4/0x170
> > [    5.601246]  component_add+0x14/0x20
> > [    5.601248]  vc4_vec_dev_probe+0x20/0x30
> > [    5.601252]  platform_drv_probe+0x54/0xa8
> > [    5.601254]  really_probe+0xd8/0x320
> > [    5.601256]  driver_probe_device+0x58/0xf0
> > [    5.601258]  __device_attach_driver+0x84/0xc8
> > [    5.601263]  bus_for_each_drv+0x78/0xc8
> > [    5.601265]  __device_attach+0xe4/0x140
> > [    5.601267]  device_initial_probe+0x14/0x20
> > [    5.601269]  bus_probe_device+0x9c/0xa8
> > [    5.601271]  deferred_probe_work_func+0x74/0xb0
> > [    5.601276]  process_one_work+0x1bc/0x338
> > [    5.601279]  worker_thread+0x1f8/0x428
> > [    5.601282]  kthread+0x138/0x158
> > [    5.601286]  ret_from_fork+0x10/0x1c
> > [    5.601288] ---[ end trace cfba0996218c3f3d ]---
>
> Thanks for testing!
>
> Do you have a bit more details regarding your setup? Was it connected to an
> external display?

Yes, the HDMI cable is connected to HDMI0 port on RPi 4.

> If so, do you know the resolution it was trying to setup?

According to the log, I think it is 1920x1080:
Apr 27 15:37:25 endless gdm-Xorg-:0[1960]: (II) modeset(0): Output
HDMI-1 connected
Apr 27 15:37:25 endless gdm-Xorg-:0[1960]: (II) modeset(0): Output
HDMI-2 disconnected
Apr 27 15:37:25 endless gdm-Xorg-:0[1960]: (II) modeset(0): Output
Composite-1 disconnected
Apr 27 15:37:25 endless gdm-Xorg-:0[1960]: (II) modeset(0): Using
exact sizes for initial modes
Apr 27 15:37:25 endless gdm-Xorg-:0[1960]: (II) modeset(0): Output
HDMI-1 using initial mode 1920x1080 +0+0

https://gist.github.com/starnight/45e1468bfa0426a54d2fb4a9269cfb94

Regards,
Jian-Hong Pan

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Jian-Hong Pan <jian-hong@endlessm.com>
To: Maxime Ripard <maxime@cerno.tech>
Cc: devicetree@vger.kernel.org,
	Linux Kernel <linux-kernel@vger.kernel.org>,
	dri-devel <dri-devel@lists.freedesktop.org>,
	linux-i2c@vger.kernel.org, bcm-kernel-feedback-list@broadcom.com,
	Nicolas Saenz Julienne <nsaenzjulienne@suse.de>,
	Linux Upstreaming Team <linux@endlessm.com>,
	linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-rpi-kernel@lists.infradead.org
Subject: Re: [PATCH v2 00/91] drm/vc4: Support BCM2711 Display Pipelin
Date: Mon, 4 May 2020 14:35:08 +0800	[thread overview]
Message-ID: <CAPpJ_efvtVzb_hvoVOeaePh7UdE13wOiiGaDBH38cToB-yhkUg@mail.gmail.com> (raw)
In-Reply-To: <20200428162152.ztsqp7nxqbwqrm6r@gilmour.lan>

Maxime Ripard <maxime@cerno.tech> 於 2020年4月29日 週三 上午12:21寫道:
>
> Hi,
>
> On Mon, Apr 27, 2020 at 03:23:42PM +0800, Jian-Hong Pan wrote:
> > Hi Maxime,
> >
> > Thanks for your V2 patch series!  I'm testing it.
> >
> > This patch series is applied upon mainline kernel 5.7-rc2 cleanly and built.
> > System can boot into console text mode, but no graphic UI.
> >
> > Get the error in vc5_hdmi_phy_init(), and full dmesg is at [1]:
> >
> > [    5.587543] vc4_hdmi fef00700.hdmi: Unknown register ID 46
> > [    5.587700] debugfs: Directory 'fef00700.hdmi' with parent 'vc4-hdmi' already present!
> > [    5.588070] vc4_hdmi fef00700.hdmi: vc4-hdmi-hifi <-> fef00700.hdmi mapping ok
> > [    5.588076] vc4_hdmi fef00700.hdmi: ASoC: no DMI vendor name!
> > [    5.588263] vc4-drm gpu: bound fef00700.hdmi (ops vc4_hdmi_ops)
> > [    5.588299] vc4_hdmi fef05700.hdmi: Unknown register ID 46
> > [    5.588373] debugfs: Directory 'vc4-hdmi' with parent 'asoc' already present!
> > [    5.588673] vc4_hdmi fef05700.hdmi: vc4-hdmi-hifi <-> fef05700.hdmi mapping ok
> > [    5.588677] vc4_hdmi fef05700.hdmi: ASoC: no DMI vendor name!
> > [    5.588809] vc4-drm gpu: bound fef05700.hdmi (ops vc4_hdmi_ops)
> > [    5.588854] vc4-drm gpu: bound fe806000.vec (ops vc4_vec_ops)
> > [    5.588897] vc4-drm gpu: bound fe004000.txp (ops vc4_txp_ops)
> > [    5.588934] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops)
> > [    5.588990] vc4-drm gpu: bound fe206000.pixelvalve (ops vc4_crtc_ops)
> > [    5.589030] vc4-drm gpu: bound fe207000.pixelvalve (ops vc4_crtc_ops)
> > [    5.589074] vc4-drm gpu: bound fe20a000.pixelvalve (ops vc4_crtc_ops)
> > [    5.589106] vc4-drm gpu: bound fe216000.pixelvalve (ops vc4_crtc_ops)
> > [    5.589145] vc4-drm gpu: bound fec12000.pixelvalve (ops vc4_crtc_ops)
> > [    5.589294] checking generic (3e513000 6d8c00) vs hw (0 ffffffffffffffff)
> > [    5.589297] fb0: switching to vc4drmfb from simple
> > [    5.589433] Console: switching to colour dummy device 80x25
> > [    5.589481] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
> > [    5.589816] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 0
> > [    5.601079] ------------[ cut here ]------------
> > [    5.601095] WARNING: CPU: 2 PID: 127 at drivers/gpu/drm/vc4/vc4_hdmi_phy.c:413 vc5_hdmi_phy_init+0x7ac/0x2078
> > [    5.601097] Modules linked in:
> > [    5.601103] CPU: 2 PID: 127 Comm: kworker/2:1 Not tainted 5.7.0-rc2-00091-ga181df59a930 #7
> > [    5.601105] Hardware name: Raspberry Pi 4 Model B (DT)
> > [    5.601112] Workqueue: events deferred_probe_work_func
> > [    5.601116] pstate: 20000005 (nzCv daif -PAN -UAO)
> > [    5.601119] pc : vc5_hdmi_phy_init+0x7ac/0x2078
> > [    5.601123] lr : vc4_hdmi_encoder_enable+0x1b8/0x1ac0
> > [    5.601124] sp : ffff80001217b410
> > [    5.601126] x29: ffff80001217b410 x28: ffff0000ec6370f0
> > [    5.601129] x27: ffff0000f650d400 x26: 000000008a500000
> > [    5.601132] x25: ffff8000113b4ac0 x24: 0000000000002060
> > [    5.601135] x23: 000000000a500000 x22: 0000000000000300
> > [    5.601137] x21: 0000000008d9ee20 x20: ffff0000ec535080
> > [    5.601140] x19: 000000010989e7c0 x18: 0000000000000000
> > [    5.601142] x17: 0000000000000001 x16: 0000000000005207
> > [    5.601145] x15: 00004932ad293c92 x14: 0000000000000137
> > [    5.601147] x13: ffff800010015000 x12: 0000000000000001
> > [    5.601150] x11: 0000000000000001 x10: 0000000000000000
> > [    5.601152] x9 : 0000000000000000 x8 : ffff800010015038
> > [    5.601154] x7 : 0000000000000001 x6 : ffff80001217b368
> > [    5.601157] x5 : 0000000000000000 x4 : 000000000000004c
> > [    5.601159] x3 : 0000000000000000 x2 : ffff8000113b4ac0
> > [    5.601162] x1 : ffff8000120c5f44 x0 : 00000000dc8984ff
> > [    5.601164] Call trace:
> > [    5.601169]  vc5_hdmi_phy_init+0x7ac/0x2078
> > [    5.601172]  vc4_hdmi_encoder_enable+0x1b8/0x1ac0
> > [    5.601176]  drm_atomic_helper_commit_modeset_enables+0x224/0x248
> > [    5.601179]  vc4_atomic_complete_commit+0x400/0x558
> > [    5.601182]  vc4_atomic_commit+0x1e0/0x200
> > [    5.601185]  drm_atomic_commit+0x4c/0x60
> > [    5.601190]  drm_client_modeset_commit_atomic.isra.0+0x17c/0x238
> > [    5.601192]  drm_client_modeset_commit_locked+0x5c/0x198
> > [    5.601195]  drm_client_modeset_commit+0x30/0x58
> > [    5.601201]  drm_fb_helper_restore_fbdev_mode_unlocked+0x78/0xe0
> > [    5.601204]  drm_fb_helper_set_par+0x30/0x68
> > [    5.601208]  fbcon_init+0x3d4/0x598
> > [    5.601212]  visual_init+0xb0/0x108
> > [    5.601214]  do_bind_con_driver+0x1d0/0x3a8
> > [    5.601217]  do_take_over_console+0x144/0x208
> > [    5.601219]  do_fbcon_takeover+0x68/0xd8
> > [    5.601222]  fbcon_fb_registered+0x100/0x118
> > [    5.601226]  register_framebuffer+0x1f4/0x338
> > [    5.601229]  __drm_fb_helper_initial_config_and_unlock+0x2f8/0x4a0
> > [    5.601232]  drm_fbdev_client_hotplug+0xd4/0x1b0
> > [    5.601235]  drm_fbdev_generic_setup+0xb0/0x130
> > [    5.601238]  vc4_drm_bind+0x184/0x1a0
> > [    5.601241]  try_to_bring_up_master+0x168/0x1c8
> > [    5.601244]  __component_add+0xa4/0x170
> > [    5.601246]  component_add+0x14/0x20
> > [    5.601248]  vc4_vec_dev_probe+0x20/0x30
> > [    5.601252]  platform_drv_probe+0x54/0xa8
> > [    5.601254]  really_probe+0xd8/0x320
> > [    5.601256]  driver_probe_device+0x58/0xf0
> > [    5.601258]  __device_attach_driver+0x84/0xc8
> > [    5.601263]  bus_for_each_drv+0x78/0xc8
> > [    5.601265]  __device_attach+0xe4/0x140
> > [    5.601267]  device_initial_probe+0x14/0x20
> > [    5.601269]  bus_probe_device+0x9c/0xa8
> > [    5.601271]  deferred_probe_work_func+0x74/0xb0
> > [    5.601276]  process_one_work+0x1bc/0x338
> > [    5.601279]  worker_thread+0x1f8/0x428
> > [    5.601282]  kthread+0x138/0x158
> > [    5.601286]  ret_from_fork+0x10/0x1c
> > [    5.601288] ---[ end trace cfba0996218c3f3d ]---
>
> Thanks for testing!
>
> Do you have a bit more details regarding your setup? Was it connected to an
> external display?

Yes, the HDMI cable is connected to HDMI0 port on RPi 4.

> If so, do you know the resolution it was trying to setup?

According to the log, I think it is 1920x1080:
Apr 27 15:37:25 endless gdm-Xorg-:0[1960]: (II) modeset(0): Output
HDMI-1 connected
Apr 27 15:37:25 endless gdm-Xorg-:0[1960]: (II) modeset(0): Output
HDMI-2 disconnected
Apr 27 15:37:25 endless gdm-Xorg-:0[1960]: (II) modeset(0): Output
Composite-1 disconnected
Apr 27 15:37:25 endless gdm-Xorg-:0[1960]: (II) modeset(0): Using
exact sizes for initial modes
Apr 27 15:37:25 endless gdm-Xorg-:0[1960]: (II) modeset(0): Output
HDMI-1 using initial mode 1920x1080 +0+0

https://gist.github.com/starnight/45e1468bfa0426a54d2fb4a9269cfb94

Regards,
Jian-Hong Pan
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  reply	other threads:[~2020-05-04  6:36 UTC|newest]

Thread overview: 426+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-24 15:33 [PATCH v2 00/91] drm/vc4: Support BCM2711 Display Pipeline Maxime Ripard
2020-04-24 15:33 ` Maxime Ripard
2020-04-24 15:33 ` Maxime Ripard
2020-04-24 15:33 ` [PATCH v2 01/91] i2c: brcmstb: Allow to compile it on BCM2835 Maxime Ripard
2020-04-24 15:33   ` Maxime Ripard
2020-04-24 15:33   ` Maxime Ripard
2020-04-24 16:13   ` Wolfram Sang
2020-04-24 16:13     ` Wolfram Sang
2020-04-24 16:13     ` Wolfram Sang
2020-04-24 17:07     ` Florian Fainelli
2020-04-24 17:07       ` Florian Fainelli
2020-04-24 17:07       ` Florian Fainelli
2020-04-24 19:04       ` Wolfram Sang
2020-04-24 19:04         ` Wolfram Sang
2020-04-24 19:04         ` Wolfram Sang
2020-04-26  7:44   ` Wolfram Sang
2020-04-26  7:44     ` Wolfram Sang
2020-04-26  7:44     ` Wolfram Sang
2020-04-24 15:33 ` [PATCH v2 02/91] dt-bindings: arm: bcm: Convert BCM2835 firmware binding to YAML Maxime Ripard
2020-04-24 15:33   ` Maxime Ripard
2020-04-24 15:33   ` Maxime Ripard
2020-04-24 15:33 ` [PATCH v2 03/91] dt-bindings: clock: Add a binding for the RPi Firmware clocks Maxime Ripard
2020-04-24 15:33   ` Maxime Ripard
2020-04-24 15:33   ` Maxime Ripard
2020-05-11 21:47   ` Rob Herring
2020-05-11 21:47     ` Rob Herring
2020-05-11 21:47     ` Rob Herring
2020-05-13  8:13     ` Maxime Ripard
2020-05-13  8:13       ` Maxime Ripard
2020-05-13  8:13       ` Maxime Ripard
2020-04-24 15:33 ` [PATCH v2 04/91] firmware: rpi: Only create clocks device if we don't have a node for it Maxime Ripard
2020-04-24 15:33   ` Maxime Ripard
2020-04-24 15:33   ` Maxime Ripard
2020-04-27 11:24   ` Nicolas Saenz Julienne
2020-04-27 11:24     ` Nicolas Saenz Julienne
2020-04-27 11:24     ` Nicolas Saenz Julienne
2020-04-28 13:50     ` Maxime Ripard
2020-04-28 13:50       ` Maxime Ripard
2020-04-28 13:50       ` Maxime Ripard
2020-04-30 16:27   ` Nicolas Saenz Julienne
2020-04-30 16:27     ` Nicolas Saenz Julienne
2020-04-30 16:27     ` Nicolas Saenz Julienne
2020-04-24 15:33 ` [PATCH v2 05/91] clk: bcm: rpi: Allow the driver to be probed by DT Maxime Ripard
2020-04-24 15:33   ` Maxime Ripard
2020-04-24 15:33   ` Maxime Ripard
2020-04-30 16:19   ` Nicolas Saenz Julienne
2020-04-30 16:19     ` Nicolas Saenz Julienne
2020-04-30 16:19     ` Nicolas Saenz Julienne
2020-04-24 15:33 ` [PATCH v2 06/91] clk: bcm: rpi: Statically init clk_init_data Maxime Ripard
2020-04-24 15:33   ` Maxime Ripard
2020-04-24 15:33   ` Maxime Ripard
2020-05-27  6:47   ` Stephen Boyd
2020-05-27  6:47     ` Stephen Boyd
2020-05-27  6:47     ` Stephen Boyd
2020-04-24 15:33 ` [PATCH v2 07/91] clk: bcm: rpi: Use clk_hw_register for pllb_arm Maxime Ripard
2020-04-24 15:33   ` Maxime Ripard
2020-04-24 15:33   ` Maxime Ripard
2020-04-24 15:33 ` [PATCH v2 08/91] clk: bcm: rpi: Remove global pllb_arm clock pointer Maxime Ripard
2020-04-24 15:33   ` Maxime Ripard
2020-04-24 15:33   ` Maxime Ripard
2020-05-27  6:48   ` Stephen Boyd
2020-05-27  6:48     ` Stephen Boyd
2020-05-27  6:48     ` Stephen Boyd
2020-04-24 15:33 ` [PATCH v2 09/91] clk: bcm: rpi: Make sure pllb_arm is removed Maxime Ripard
2020-04-24 15:33   ` Maxime Ripard
2020-04-24 15:33   ` Maxime Ripard
2020-05-27  6:48   ` Stephen Boyd
2020-05-27  6:48     ` Stephen Boyd
2020-05-27  6:48     ` Stephen Boyd
2020-04-24 15:33 ` [PATCH v2 10/91] clk: bcm: rpi: Remove pllb_arm_lookup global pointer Maxime Ripard
2020-04-24 15:33   ` Maxime Ripard
2020-04-24 15:33   ` Maxime Ripard
2020-04-24 15:33 ` [PATCH v2 11/91] clk: bcm: rpi: Switch to clk_hw_register_clkdev Maxime Ripard
2020-04-24 15:33   ` Maxime Ripard
2020-04-24 15:33   ` Maxime Ripard
2020-04-24 15:33 ` [PATCH v2 12/91] clk: bcm: rpi: Make sure the clkdev lookup is removed Maxime Ripard
2020-04-24 15:33   ` Maxime Ripard
2020-04-24 15:33   ` Maxime Ripard
2020-04-24 15:33 ` [PATCH v2 13/91] clk: bcm: rpi: Create a data structure for the clocks Maxime Ripard
2020-04-24 15:33   ` Maxime Ripard
2020-04-24 15:33   ` Maxime Ripard
2020-04-24 15:33 ` [PATCH v2 14/91] clk: bcm: rpi: Add clock id to data Maxime Ripard
2020-04-24 15:33   ` Maxime Ripard
2020-04-24 15:33   ` Maxime Ripard
2020-04-24 15:33 ` [PATCH v2 15/91] clk: bcm: rpi: Pass the clocks data to the firmware function Maxime Ripard
2020-04-24 15:33   ` Maxime Ripard
2020-04-24 15:33   ` Maxime Ripard
2020-05-27  6:49   ` Stephen Boyd
2020-05-27  6:49     ` Stephen Boyd
2020-05-27  6:49     ` Stephen Boyd
2020-04-24 15:33 ` [PATCH v2 16/91] clk: bcm: rpi: Rename is_prepared function Maxime Ripard
2020-04-24 15:33   ` Maxime Ripard
2020-04-24 15:33   ` Maxime Ripard
2020-04-24 15:33 ` [PATCH v2 17/91] clk: bcm: rpi: Split pllb clock hooks Maxime Ripard
2020-04-24 15:33   ` Maxime Ripard
2020-04-24 15:33   ` Maxime Ripard
2020-04-24 15:33 ` [PATCH v2 18/91] clk: bcm: rpi: Make the PLLB registration function return a clk_hw Maxime Ripard
2020-04-24 15:33   ` Maxime Ripard
2020-04-24 15:33   ` Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 19/91] clk: bcm: rpi: Add DT provider for the clocks Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 20/91] clk: bcm: rpi: Discover the firmware clocks Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-05-04 12:05   ` Nicolas Saenz Julienne
2020-05-04 12:05     ` Nicolas Saenz Julienne
2020-05-04 12:05     ` Nicolas Saenz Julienne
2020-05-15  8:19     ` Maxime Ripard
2020-05-15  8:19       ` Maxime Ripard
2020-05-15  8:19       ` Maxime Ripard
2020-05-21  9:13       ` Nicolas Saenz Julienne
2020-05-21  9:13         ` Nicolas Saenz Julienne
2020-05-21  9:13         ` Nicolas Saenz Julienne
2020-05-27  7:03   ` Stephen Boyd
2020-05-27  7:03     ` Stephen Boyd
2020-05-27  7:03     ` Stephen Boyd
2020-04-24 15:34 ` [PATCH v2 21/91] ARM: dts: bcm2711: Add firmware clocks node Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 22/91] reset: Move reset-simple header out of drivers/reset Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-05-06  9:26   ` Philipp Zabel
2020-05-06  9:26     ` Philipp Zabel
2020-05-06  9:26     ` Philipp Zabel
2020-05-13 11:52     ` Maxime Ripard
2020-05-13 11:52       ` Maxime Ripard
2020-05-13 11:52       ` Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 23/91] reset: simple: Add reset callback Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-05-06  9:26   ` Philipp Zabel
2020-05-06  9:26     ` Philipp Zabel
2020-05-06  9:26     ` Philipp Zabel
2020-04-24 15:34 ` [PATCH v2 24/91] dt-bindings: clock: Add BCM2711 DVP binding Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 25/91] clk: bcm: Add BCM2711 DVP driver Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-05-27  7:06   ` Stephen Boyd
2020-05-27  7:06     ` Stephen Boyd
2020-05-27  7:06     ` Stephen Boyd
2020-04-24 15:34 ` [PATCH v2 26/91] ARM: dts: bcm2711: Add HDMI DVP Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 27/91] dt-bindings: display: Convert VC4 bindings to schemas Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-27 21:32   ` Rob Herring
2020-04-27 21:32     ` Rob Herring
2020-04-27 21:32     ` Rob Herring
2020-04-24 15:34 ` [PATCH v2 28/91] dt-bindings: display: vc4: dpi: Add missing clock-names property Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 29/91] dt-bindings: display: vc4: dsi: Add missing clock properties Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 30/91] dt-bindings: display: vc4: hdmi: Add missing clock-names property Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 31/91] dt-bindings: display: vc4: Document BCM2711 VC5 Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 32/91] drm/vc4: drv: Add include guards Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 33/91] drm/vc4: drv: Support BCM2711 Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 34/91] dt-bindings: display: Add support for the BCM2711 HVS Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 35/91] drm/vc4: Add support for the BCM2711 HVS5 Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 36/91] drm/vc4: hvs: Boost the core clock during modeset Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 37/91] drm/vc4: plane: Improve LBM usage Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 38/91] drm/vc4: plane: Move planes creation to its own function Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 39/91] drm/vc4: plane: Move additional planes creation to driver Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 40/91] drm/vc4: plane: Register all the planes at once Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 41/91] drm/vc4: plane: Create overlays for any CRTC Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 42/91] drm/vc4: plane: Create more planes Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 43/91] drm/vc4: crtc: Rename SoC data structures Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 44/91] drm/vc4: crtc: Move crtc state to common header Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 45/91] drm/vc4: crtc: Deal with different number of pixel per clock Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 46/91] drm/vc4: crtc: Use a shared interrupt Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 47/91] drm/vc4: crtc: Turn static const variable into a define Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 48/91] drm/vc4: crtc: Move the cob allocation outside of bind Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 49/91] drm/vc4: crtc: Rename HVS channel to output Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 50/91] drm/vc4: crtc: Use local chan variable Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 51/91] drm/vc4: crtc: Enable and disable the PV in atomic_enable / disable Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 52/91] drm/vc4: crtc: Assign output to channel automatically Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 53/91] drm/vc4: crtc: Add FIFO depth to vc4_crtc_data Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 54/91] drm/vc4: crtc: Add function to compute FIFO level bits Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 55/91] drm/vc4: crtc: Rename HDMI encoder type to HDMI0 Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 56/91] drm/vc4: crtc: Add HDMI1 encoder type Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 57/91] drm/vc4: crtc: Remove redundant call to drm_crtc_enable_color_mgmt Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 58/91] drm/vc4: crtc: Disable color management for HVS5 Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 59/91] dt-bindings: display: vc4: pv: Add BCM2711 pixel valves Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 60/91] drm/vc4: crtc: Add BCM2711 pixelvalves Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 61/91] drm/vc4: hdmi: Use debugfs private field Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 62/91] drm/vc4: hdmi: Move structure to header Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 63/91] drm/vc4: hdmi: rework connectors and encoders Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 64/91] drm/vc4: hdmi: Remove DDC argument to connector_init Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 65/91] drm/vc4: hdmi: Rename hdmi to vc4_hdmi Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 66/91] drm/vc4: hdmi: Move accessors " Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 67/91] drm/vc4: hdmi: Use local vc4_hdmi directly Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 68/91] drm/vc4: hdmi: Add container_of macros for encoders and connectors Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 69/91] drm/vc4: hdmi: Pass vc4_hdmi to CEC code Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 70/91] drm/vc4: hdmi: Remove vc4_dev hdmi pointer Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 71/91] drm/vc4: hdmi: Remove vc4_hdmi_connector Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 72/91] drm/vc4: hdmi: Introduce resource init and variant Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-25 21:06   ` Stefan Wahren
2020-04-25 21:06     ` Stefan Wahren
2020-04-25 21:06     ` Stefan Wahren
2020-04-24 15:34 ` [PATCH v2 73/91] drm/vc4: hdmi: Implement a register layout abstraction Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 74/91] drm/vc4: hdmi: Add reset callback Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 75/91] drm/vc4: hdmi: Add PHY init and disable function Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 76/91] drm/vc4: hdmi: Add PHY RNG enable / " Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 77/91] drm/vc4: hdmi: Add a CSC setup callback Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 78/91] drm/vc4: hdmi: Store the encoder type in the variant structure Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:34   ` Maxime Ripard
2020-04-24 15:35 ` [PATCH v2 79/91] drm/vc4: hdmi: Deal with multiple debugfs files Maxime Ripard
2020-04-24 15:35   ` Maxime Ripard
2020-04-24 15:35   ` Maxime Ripard
2020-04-25 21:26   ` Stefan Wahren
2020-04-25 21:26     ` Stefan Wahren
2020-04-25 21:26     ` Stefan Wahren
2020-04-28 15:57     ` Maxime Ripard
2020-04-28 15:57       ` Maxime Ripard
2020-04-28 15:57       ` Maxime Ripard
2020-04-28 16:19       ` Dave Stevenson
2020-04-28 16:19         ` Dave Stevenson
2020-04-28 16:19         ` Dave Stevenson
2020-04-24 15:35 ` [PATCH v2 80/91] drm/vc4: hdmi: Move CEC init to its own function Maxime Ripard
2020-04-24 15:35   ` Maxime Ripard
2020-04-24 15:35   ` Maxime Ripard
2020-04-24 15:35 ` [PATCH v2 81/91] drm/vc4: hdmi: Add CEC support flag Maxime Ripard
2020-04-24 15:35   ` Maxime Ripard
2020-04-24 15:35   ` Maxime Ripard
2020-04-24 15:35 ` [PATCH v2 82/91] drm/vc4: hdmi: Remove unused CEC_CLOCK_DIV define Maxime Ripard
2020-04-24 15:35   ` Maxime Ripard
2020-04-24 15:35   ` Maxime Ripard
2020-04-24 15:35 ` [PATCH v2 83/91] drm/vc4: hdmi: Rename drm_encoder pointer in mode_valid Maxime Ripard
2020-04-24 15:35   ` Maxime Ripard
2020-04-24 15:35   ` Maxime Ripard
2020-04-24 15:35 ` [PATCH v2 84/91] drm/vc4: hdmi: Adjust HSM clock rate depending on pixel rate Maxime Ripard
2020-04-24 15:35   ` Maxime Ripard
2020-04-24 15:35   ` Maxime Ripard
2020-04-24 15:35 ` [PATCH v2 85/91] drm/vc4: hdmi: Use reg-names to retrieve the HDMI audio registers Maxime Ripard
2020-04-24 15:35   ` Maxime Ripard
2020-04-24 15:35   ` Maxime Ripard
2020-04-24 15:35 ` [PATCH v2 86/91] drm/vc4: hdmi: Reset audio infoframe on encoder_enable if previously streaming Maxime Ripard
2020-04-24 15:35   ` Maxime Ripard
2020-04-24 15:35   ` Maxime Ripard
2020-04-24 15:35 ` [PATCH v2 87/91] drm/vc4: hdmi: Set the b-frame marker to the match ALSA's default Maxime Ripard
2020-04-24 15:35   ` Maxime Ripard
2020-04-24 15:35   ` Maxime Ripard
2020-04-24 15:35 ` [PATCH v2 88/91] drm/vc4: hdmi: Add audio-related callbacks Maxime Ripard
2020-04-24 15:35   ` Maxime Ripard
2020-04-24 15:35   ` Maxime Ripard
2020-04-24 15:35 ` [PATCH v2 89/91] drm/vc4: hdmi: Support the BCM2711 HDMI controllers Maxime Ripard
2020-04-24 15:35   ` Maxime Ripard
2020-04-24 15:35   ` Maxime Ripard
2020-05-07 17:36   ` Stefan Wahren
2020-05-07 17:36     ` Stefan Wahren
2020-05-07 17:36     ` Stefan Wahren
2020-04-24 15:35 ` [PATCH v2 90/91] dt-bindings: display: vc4: hdmi: Add BCM2711 HDMI controllers bindings Maxime Ripard
2020-04-24 15:35   ` Maxime Ripard
2020-04-24 15:35   ` Maxime Ripard
2020-05-11 21:50   ` Rob Herring
2020-05-11 21:50     ` Rob Herring
2020-05-11 21:50     ` Rob Herring
2020-05-13  8:16     ` Maxime Ripard
2020-05-13  8:16       ` Maxime Ripard
2020-05-13  8:16       ` Maxime Ripard
2020-04-24 15:35 ` [PATCH v2 91/91] ARM: dts: bcm2711: Enable the display pipeline Maxime Ripard
2020-04-24 15:35   ` Maxime Ripard
2020-04-24 15:35   ` Maxime Ripard
2020-04-25 20:54   ` Stefan Wahren
2020-04-25 20:54     ` Stefan Wahren
2020-04-25 20:54     ` Stefan Wahren
2020-04-28 14:11     ` Maxime Ripard
2020-04-28 14:11       ` Maxime Ripard
2020-04-28 14:11       ` Maxime Ripard
2020-04-27  7:23 ` [PATCH v2 00/91] drm/vc4: Support BCM2711 Display Pipelin Jian-Hong Pan
2020-04-27  7:23   ` Jian-Hong Pan
2020-04-27  7:23   ` Jian-Hong Pan
2020-04-28 16:21   ` Maxime Ripard
2020-04-28 16:21     ` Maxime Ripard
2020-04-28 16:21     ` Maxime Ripard
2020-05-04  6:35     ` Jian-Hong Pan [this message]
2020-05-04  6:35       ` Jian-Hong Pan
2020-05-04  6:35       ` Jian-Hong Pan
2020-05-07 17:21       ` Maxime Ripard
2020-05-07 17:21         ` Maxime Ripard
2020-05-07 17:21         ` Maxime Ripard
2020-05-08  6:20         ` Jian-Hong Pan
2020-05-08  6:20           ` Jian-Hong Pan
2020-05-08  6:20           ` Jian-Hong Pan
2020-05-11  3:12           ` Jian-Hong Pan
2020-05-11  3:12             ` Jian-Hong Pan
2020-05-11  3:12             ` Jian-Hong Pan
2020-05-25 11:11             ` Maxime Ripard
2020-05-25 11:11               ` Maxime Ripard
2020-05-25 11:11               ` Maxime Ripard
2020-05-26 10:20             ` Maxime Ripard
2020-05-26 10:20               ` Maxime Ripard
2020-05-26 10:20               ` Maxime Ripard
2020-05-27  3:49               ` Daniel Drake
2020-05-27  3:49                 ` Daniel Drake
2020-05-27  3:49                 ` Daniel Drake
2020-05-27  9:13                 ` Maxime Ripard
2020-05-27  9:13                   ` Maxime Ripard
2020-05-27  9:13                   ` Maxime Ripard
2020-05-27  9:15                   ` Daniel Drake
2020-05-27  9:15                     ` Daniel Drake
2020-05-27  9:15                     ` Daniel Drake
2020-05-28  7:30                     ` Maxime Ripard
2020-05-28  7:30                       ` Maxime Ripard
2020-05-28  7:30                       ` Maxime Ripard
2020-06-01  7:58                       ` Jian-Hong Pan
2020-06-01  7:58                         ` Jian-Hong Pan
2020-06-01  7:58                         ` Jian-Hong Pan
2020-06-02 11:04                         ` Maxime Ripard
2020-06-02 11:04                           ` Maxime Ripard
2020-06-02 11:04                           ` Maxime Ripard
2020-06-05  8:44                           ` Jian-Hong Pan
2020-06-05  8:44                             ` Jian-Hong Pan
2020-06-05  8:44                             ` Jian-Hong Pan
2020-06-29 14:21                             ` Maxime Ripard
2020-06-29 14:21                               ` Maxime Ripard
2020-06-29 14:21                               ` Maxime Ripard
2020-06-30  8:26                               ` Jian-Hong Pan
2020-06-30  8:26                                 ` Jian-Hong Pan
2020-06-30  8:26                                 ` Jian-Hong Pan
2020-07-03 12:56                                 ` Maxime Ripard
2020-07-03 12:56                                   ` Maxime Ripard
2020-07-03 12:56                                   ` Maxime Ripard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAPpJ_efvtVzb_hvoVOeaePh7UdE13wOiiGaDBH38cToB-yhkUg@mail.gmail.com \
    --to=jian-hong@endlessm.com \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=eric@anholt.net \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rpi-kernel@lists.infradead.org \
    --cc=linux@endlessm.com \
    --cc=maxime@cerno.tech \
    --cc=nsaenzjulienne@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.