Re: [PATCH v2 04/91] firmware: rpi: Only create clocks device if we don't have a node for it

[Nicolas Saenz Julienne <nsaenzjulienne@suse.de>]

[-- Attachment #1: Type: text/plain, Size: 1331 bytes --]

On Fri, 2020-04-24 at 17:33 +0200, Maxime Ripard wrote:
> The firmware clocks driver was previously probed through a platform_device
> created by the firmware driver.
> 
> Since we will now have a node for that clocks driver, we need to create the
> device only in the case where there's no node for it already.
> 
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
> ---
>  drivers/firmware/raspberrypi.c | 17 +++++++++++++++--
>  1 file changed, 15 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/firmware/raspberrypi.c b/drivers/firmware/raspberrypi.c
> index da26a584dca0..1874f41b007c 100644
> --- a/drivers/firmware/raspberrypi.c
> +++ b/drivers/firmware/raspberrypi.c
> @@ -210,6 +210,15 @@ rpi_register_hwmon_driver(struct device *dev, struct
> rpi_firmware *fw)
>  
>  static void rpi_register_clk_driver(struct device *dev)
>  {
> +	/*
> +	 * Earlier DTs don't have a node for the firmware clocks but
> +	 * rely on us creating a platform device by hand. If we do
> +	 * have a node for the firmware clocks, just bail out here.
> +	 */
> +	if (of_get_compatible_child(dev->of_node,
> +				    "raspberrypi,firmware-clocks"))

In the case you find a compatible device node you have to decrement the
refcount of_get_compatible_child() increased before leaving.

Regards,
Nicolas


[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 488 bytes --]