[PATCH v3 0/2] PCI: hv: Refactor hv_irq_unmask() to use hv_vpset and cpumask_to_vpset()

[PATCH v3 0/2] PCI: hv: Refactor hv_irq_unmask() to use hv_vpset and cpumask_to_vpset()

[Maya Nakamura]

This patchset removes a duplicate definition of VP set (hv_vp_set) and
uses the common definition (hv_vpset) that is used in other places. It
changes the order of the members in struct hv_pcibus_device due to
flexible array in hv_vpset.

It also removes the duplicate implementation of cpumask_to_vpset(), uses
the shared implementation, and exports hv_max_vp_index, which is
required by cpumask_to_vpset().

Maya Nakamura (2):
  PCI: hv: Replace hv_vp_set with hv_vpset
  PCI: hv: Refactor hv_irq_unmask() to use cpumask_to_vpset()

 arch/x86/hyperv/hv_init.c           |  1 +
 drivers/pci/controller/pci-hyperv.c | 59 +++++++++++++----------------
 2 files changed, 28 insertions(+), 32 deletions(-)

-- 
2.17.1

[PATCH v3 0/2] PCI: hv: Refactor hv_irq_unmask() to use hv_vpset and cpumask_to_vpset()

[Maya Nakamura]

This patchset removes a duplicate definition of VP set (hv_vp_set) and
uses the common definition (hv_vpset) that is used in other places. It
changes the order of the members in struct hv_pcibus_device due to
flexible array in hv_vpset.

It also removes the duplicate implementation of cpumask_to_vpset(), uses
the shared implementation, and exports hv_max_vp_index, which is
required by cpumask_to_vpset().

Maya Nakamura (2):
  PCI: hv: Replace hv_vp_set with hv_vpset
  PCI: hv: Refactor hv_irq_unmask() to use cpumask_to_vpset()

 arch/x86/hyperv/hv_init.c           |  1 +
 drivers/pci/controller/pci-hyperv.c | 59 +++++++++++++----------------
 2 files changed, 28 insertions(+), 32 deletions(-)

-- 
2.17.1

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

[PATCH v3 1/2] PCI: hv: Replace hv_vp_set with hv_vpset

[Maya Nakamura]

Remove a duplicate definition of VP set (hv_vp_set) and use the common
definition (hv_vpset) that is used in other places.

Change the order of the members in struct hv_pcibus_device so that the
declaration of retarget_msi_interrupt_params is the last member. Struct
hv_vpset, which contains a flexible array, is nested two levels deep in
struct hv_pcibus_device via retarget_msi_interrupt_params.

Add a comment that retarget_msi_interrupt_params should be the last member
of struct hv_pcibus_device.

Signed-off-by: Maya Nakamura <m.maya.nakamura@gmail.com>
---
Change in v3:
- Correct the v2 change log.

Change in v2:
- Update the commit message.

 drivers/pci/controller/pci-hyperv.c | 25 ++++++++++++-------------
 1 file changed, 12 insertions(+), 13 deletions(-)

diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c
index 9ba4d12c179c..da8b58d8630d 100644
--- a/drivers/pci/controller/pci-hyperv.c
+++ b/drivers/pci/controller/pci-hyperv.c
@@ -393,12 +393,6 @@ struct hv_interrupt_entry {
 
 #define HV_VP_SET_BANK_COUNT_MAX	5 /* current implementation limit */
 
-struct hv_vp_set {
-	u64	format;			/* 0 (HvGenericSetSparse4k) */
-	u64	valid_banks;
-	u64	masks[HV_VP_SET_BANK_COUNT_MAX];
-};
-
 /*
  * flags for hv_device_interrupt_target.flags
  */
@@ -410,7 +404,7 @@ struct hv_device_interrupt_target {
 	u32	flags;
 	union {
 		u64		 vp_mask;
-		struct hv_vp_set vp_set;
+		struct hv_vpset vp_set;
 	};
 };
 
@@ -460,12 +454,16 @@ struct hv_pcibus_device {
 	struct msi_controller msi_chip;
 	struct irq_domain *irq_domain;
 
-	/* hypercall arg, must not cross page boundary */
-	struct retarget_msi_interrupt retarget_msi_interrupt_params;
-
 	spinlock_t retarget_msi_interrupt_lock;
 
 	struct workqueue_struct *wq;
+
+	/* hypercall arg, must not cross page boundary */
+	struct retarget_msi_interrupt retarget_msi_interrupt_params;
+
+	/*
+	 * Don't put anything here: retarget_msi_interrupt_params must be last
+	 */
 };
 
 /*
@@ -955,12 +953,13 @@ static void hv_irq_unmask(struct irq_data *data)
 		 */
 		params->int_target.flags |=
 			HV_DEVICE_INTERRUPT_TARGET_PROCESSOR_SET;
-		params->int_target.vp_set.valid_banks =
+		params->int_target.vp_set.valid_bank_mask =
 			(1ull << HV_VP_SET_BANK_COUNT_MAX) - 1;
 
 		/*
 		 * var-sized hypercall, var-size starts after vp_mask (thus
-		 * vp_set.format does not count, but vp_set.valid_banks does).
+		 * vp_set.format does not count, but vp_set.valid_bank_mask
+		 * does).
 		 */
 		var_size = 1 + HV_VP_SET_BANK_COUNT_MAX;
 
@@ -974,7 +973,7 @@ static void hv_irq_unmask(struct irq_data *data)
 				goto exit_unlock;
 			}
 
-			params->int_target.vp_set.masks[cpu_vmbus / 64] |=
+			params->int_target.vp_set.bank_contents[cpu_vmbus / 64]	|=
 				(1ULL << (cpu_vmbus & 63));
 		}
 	} else {
-- 
2.17.1

[PATCH v3 1/2] PCI: hv: Replace hv_vp_set with hv_vpset

[Maya Nakamura]

Remove a duplicate definition of VP set (hv_vp_set) and use the common
definition (hv_vpset) that is used in other places.

Change the order of the members in struct hv_pcibus_device so that the
declaration of retarget_msi_interrupt_params is the last member. Struct
hv_vpset, which contains a flexible array, is nested two levels deep in
struct hv_pcibus_device via retarget_msi_interrupt_params.

Add a comment that retarget_msi_interrupt_params should be the last member
of struct hv_pcibus_device.

Signed-off-by: Maya Nakamura <m.maya.nakamura@gmail.com>
---
Change in v3:
- Correct the v2 change log.

Change in v2:
- Update the commit message.

 drivers/pci/controller/pci-hyperv.c | 25 ++++++++++++-------------
 1 file changed, 12 insertions(+), 13 deletions(-)

diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c
index 9ba4d12c179c..da8b58d8630d 100644
--- a/drivers/pci/controller/pci-hyperv.c
+++ b/drivers/pci/controller/pci-hyperv.c
@@ -393,12 +393,6 @@ struct hv_interrupt_entry {
 
 #define HV_VP_SET_BANK_COUNT_MAX	5 /* current implementation limit */
 
-struct hv_vp_set {
-	u64	format;			/* 0 (HvGenericSetSparse4k) */
-	u64	valid_banks;
-	u64	masks[HV_VP_SET_BANK_COUNT_MAX];
-};
-
 /*
  * flags for hv_device_interrupt_target.flags
  */
@@ -410,7 +404,7 @@ struct hv_device_interrupt_target {
 	u32	flags;
 	union {
 		u64		 vp_mask;
-		struct hv_vp_set vp_set;
+		struct hv_vpset vp_set;
 	};
 };
 
@@ -460,12 +454,16 @@ struct hv_pcibus_device {
 	struct msi_controller msi_chip;
 	struct irq_domain *irq_domain;
 
-	/* hypercall arg, must not cross page boundary */
-	struct retarget_msi_interrupt retarget_msi_interrupt_params;
-
 	spinlock_t retarget_msi_interrupt_lock;
 
 	struct workqueue_struct *wq;
+
+	/* hypercall arg, must not cross page boundary */
+	struct retarget_msi_interrupt retarget_msi_interrupt_params;
+
+	/*
+	 * Don't put anything here: retarget_msi_interrupt_params must be last
+	 */
 };
 
 /*
@@ -955,12 +953,13 @@ static void hv_irq_unmask(struct irq_data *data)
 		 */
 		params->int_target.flags |=
 			HV_DEVICE_INTERRUPT_TARGET_PROCESSOR_SET;
-		params->int_target.vp_set.valid_banks =
+		params->int_target.vp_set.valid_bank_mask =
 			(1ull << HV_VP_SET_BANK_COUNT_MAX) - 1;
 
 		/*
 		 * var-sized hypercall, var-size starts after vp_mask (thus
-		 * vp_set.format does not count, but vp_set.valid_banks does).
+		 * vp_set.format does not count, but vp_set.valid_bank_mask
+		 * does).
 		 */
 		var_size = 1 + HV_VP_SET_BANK_COUNT_MAX;
 
@@ -974,7 +973,7 @@ static void hv_irq_unmask(struct irq_data *data)
 				goto exit_unlock;
 			}
 
-			params->int_target.vp_set.masks[cpu_vmbus / 64] |=
+			params->int_target.vp_set.bank_contents[cpu_vmbus / 64]	|=
 				(1ULL << (cpu_vmbus & 63));
 		}
 	} else {
-- 
2.17.1

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

RE: [PATCH v3 1/2] PCI: hv: Replace hv_vp_set with hv_vpset

[Michael Kelley]

From: Maya Nakamura <m.maya.nakamura@gmail.com> Sent: Monday, January 28, 2019 11:18 PM
> 
> Remove a duplicate definition of VP set (hv_vp_set) and use the common
> definition (hv_vpset) that is used in other places.
> 
> Change the order of the members in struct hv_pcibus_device so that the
> declaration of retarget_msi_interrupt_params is the last member. Struct
> hv_vpset, which contains a flexible array, is nested two levels deep in
> struct hv_pcibus_device via retarget_msi_interrupt_params.
> 
> Add a comment that retarget_msi_interrupt_params should be the last member
> of struct hv_pcibus_device.
> 
> Signed-off-by: Maya Nakamura <m.maya.nakamura@gmail.com>
> ---
> Change in v3:
> - Correct the v2 change log.
> 
> Change in v2:
> - Update the commit message.
> 
Reviewed-by:  Michael Kelley <mikelley@microsoft.com>
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

Re: [PATCH v3 1/2] PCI: hv: Replace hv_vp_set with hv_vpset

[Vitaly Kuznetsov]

Maya Nakamura <m.maya.nakamura@gmail.com> writes:

> Remove a duplicate definition of VP set (hv_vp_set) and use the common
> definition (hv_vpset) that is used in other places.
>
> Change the order of the members in struct hv_pcibus_device so that the
> declaration of retarget_msi_interrupt_params is the last member. Struct
> hv_vpset, which contains a flexible array, is nested two levels deep in
> struct hv_pcibus_device via retarget_msi_interrupt_params.
>
> Add a comment that retarget_msi_interrupt_params should be the last member
> of struct hv_pcibus_device.
>
> Signed-off-by: Maya Nakamura <m.maya.nakamura@gmail.com>
> ---
> Change in v3:
> - Correct the v2 change log.
>
> Change in v2:
> - Update the commit message.
>
>  drivers/pci/controller/pci-hyperv.c | 25 ++++++++++++-------------
>  1 file changed, 12 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c
> index 9ba4d12c179c..da8b58d8630d 100644
> --- a/drivers/pci/controller/pci-hyperv.c
> +++ b/drivers/pci/controller/pci-hyperv.c
> @@ -393,12 +393,6 @@ struct hv_interrupt_entry {
>  
>  #define HV_VP_SET_BANK_COUNT_MAX	5 /* current implementation limit */
>  
> -struct hv_vp_set {
> -	u64	format;			/* 0 (HvGenericSetSparse4k) */
> -	u64	valid_banks;
> -	u64	masks[HV_VP_SET_BANK_COUNT_MAX];
> -};
> -
>  /*
>   * flags for hv_device_interrupt_target.flags
>   */
> @@ -410,7 +404,7 @@ struct hv_device_interrupt_target {
>  	u32	flags;
>  	union {
>  		u64		 vp_mask;
> -		struct hv_vp_set vp_set;
> +		struct hv_vpset vp_set;
>  	};
>  };
>  
> @@ -460,12 +454,16 @@ struct hv_pcibus_device {
>  	struct msi_controller msi_chip;
>  	struct irq_domain *irq_domain;
>  
> -	/* hypercall arg, must not cross page boundary */
> -	struct retarget_msi_interrupt retarget_msi_interrupt_params;
> -
>  	spinlock_t retarget_msi_interrupt_lock;
>  
>  	struct workqueue_struct *wq;
> +
> +	/* hypercall arg, must not cross page boundary */
> +	struct retarget_msi_interrupt retarget_msi_interrupt_params;
> +

One more thing here (and again sorry for being late): this structure is
being used as Hyper-V hypercall argument and these have special
requirements on alignment (8 bytes). struct retarget_msi_interrupt is
packed and depending on your environment/compiler you may or may not see
the issue but I has able to get HVCALL_RETARGET_INTERRUPT failing with
the return value of 4 (HV_STATUS_INVALID_ALIGNMENT).

I suggest we add __aligned(8) to 'struct retarget_msi_interrupt'
definition (I haven't tested this but should work). This is not a new
issue, it existed before your patch, but the code movement you do may
change the exposure.


> +	/*
> +	 * Don't put anything here: retarget_msi_interrupt_params must be last
> +	 */
>  };
>  
>  /*
> @@ -955,12 +953,13 @@ static void hv_irq_unmask(struct irq_data *data)
>  		 */
>  		params->int_target.flags |=
>  			HV_DEVICE_INTERRUPT_TARGET_PROCESSOR_SET;
> -		params->int_target.vp_set.valid_banks =
> +		params->int_target.vp_set.valid_bank_mask =
>  			(1ull << HV_VP_SET_BANK_COUNT_MAX) - 1;
>  
>  		/*
>  		 * var-sized hypercall, var-size starts after vp_mask (thus
> -		 * vp_set.format does not count, but vp_set.valid_banks does).
> +		 * vp_set.format does not count, but vp_set.valid_bank_mask
> +		 * does).
>  		 */
>  		var_size = 1 + HV_VP_SET_BANK_COUNT_MAX;
>  
> @@ -974,7 +973,7 @@ static void hv_irq_unmask(struct irq_data *data)
>  				goto exit_unlock;
>  			}
>  
> -			params->int_target.vp_set.masks[cpu_vmbus / 64] |=
> +			params->int_target.vp_set.bank_contents[cpu_vmbus / 64]	|=
>  				(1ULL << (cpu_vmbus & 63));
>  		}
>  	} else {

-- 
Vitaly

Re: [PATCH v3 1/2] PCI: hv: Replace hv_vp_set with hv_vpset

[Vitaly Kuznetsov]

Maya Nakamura <m.maya.nakamura@gmail.com> writes:

> Remove a duplicate definition of VP set (hv_vp_set) and use the common
> definition (hv_vpset) that is used in other places.
>
> Change the order of the members in struct hv_pcibus_device so that the
> declaration of retarget_msi_interrupt_params is the last member. Struct
> hv_vpset, which contains a flexible array, is nested two levels deep in
> struct hv_pcibus_device via retarget_msi_interrupt_params.
>
> Add a comment that retarget_msi_interrupt_params should be the last member
> of struct hv_pcibus_device.
>
> Signed-off-by: Maya Nakamura <m.maya.nakamura@gmail.com>
> ---
> Change in v3:
> - Correct the v2 change log.
>
> Change in v2:
> - Update the commit message.
>
>  drivers/pci/controller/pci-hyperv.c | 25 ++++++++++++-------------
>  1 file changed, 12 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c
> index 9ba4d12c179c..da8b58d8630d 100644
> --- a/drivers/pci/controller/pci-hyperv.c
> +++ b/drivers/pci/controller/pci-hyperv.c
> @@ -393,12 +393,6 @@ struct hv_interrupt_entry {
>  
>  #define HV_VP_SET_BANK_COUNT_MAX	5 /* current implementation limit */
>  
> -struct hv_vp_set {
> -	u64	format;			/* 0 (HvGenericSetSparse4k) */
> -	u64	valid_banks;
> -	u64	masks[HV_VP_SET_BANK_COUNT_MAX];
> -};
> -
>  /*
>   * flags for hv_device_interrupt_target.flags
>   */
> @@ -410,7 +404,7 @@ struct hv_device_interrupt_target {
>  	u32	flags;
>  	union {
>  		u64		 vp_mask;
> -		struct hv_vp_set vp_set;
> +		struct hv_vpset vp_set;
>  	};
>  };
>  
> @@ -460,12 +454,16 @@ struct hv_pcibus_device {
>  	struct msi_controller msi_chip;
>  	struct irq_domain *irq_domain;
>  
> -	/* hypercall arg, must not cross page boundary */
> -	struct retarget_msi_interrupt retarget_msi_interrupt_params;
> -
>  	spinlock_t retarget_msi_interrupt_lock;
>  
>  	struct workqueue_struct *wq;
> +
> +	/* hypercall arg, must not cross page boundary */
> +	struct retarget_msi_interrupt retarget_msi_interrupt_params;
> +

One more thing here (and again sorry for being late): this structure is
being used as Hyper-V hypercall argument and these have special
requirements on alignment (8 bytes). struct retarget_msi_interrupt is
packed and depending on your environment/compiler you may or may not see
the issue but I has able to get HVCALL_RETARGET_INTERRUPT failing with
the return value of 4 (HV_STATUS_INVALID_ALIGNMENT).

I suggest we add __aligned(8) to 'struct retarget_msi_interrupt'
definition (I haven't tested this but should work). This is not a new
issue, it existed before your patch, but the code movement you do may
change the exposure.


> +	/*
> +	 * Don't put anything here: retarget_msi_interrupt_params must be last
> +	 */
>  };
>  
>  /*
> @@ -955,12 +953,13 @@ static void hv_irq_unmask(struct irq_data *data)
>  		 */
>  		params->int_target.flags |=
>  			HV_DEVICE_INTERRUPT_TARGET_PROCESSOR_SET;
> -		params->int_target.vp_set.valid_banks =
> +		params->int_target.vp_set.valid_bank_mask =
>  			(1ull << HV_VP_SET_BANK_COUNT_MAX) - 1;
>  
>  		/*
>  		 * var-sized hypercall, var-size starts after vp_mask (thus
> -		 * vp_set.format does not count, but vp_set.valid_banks does).
> +		 * vp_set.format does not count, but vp_set.valid_bank_mask
> +		 * does).
>  		 */
>  		var_size = 1 + HV_VP_SET_BANK_COUNT_MAX;
>  
> @@ -974,7 +973,7 @@ static void hv_irq_unmask(struct irq_data *data)
>  				goto exit_unlock;
>  			}
>  
> -			params->int_target.vp_set.masks[cpu_vmbus / 64] |=
> +			params->int_target.vp_set.bank_contents[cpu_vmbus / 64]	|=
>  				(1ULL << (cpu_vmbus & 63));
>  		}
>  	} else {

-- 
Vitaly
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

Re: [PATCH v3 1/2] PCI: hv: Replace hv_vp_set with hv_vpset

[Lorenzo Pieralisi]

On Wed, Feb 27, 2019 at 04:53:37PM +0100, Vitaly Kuznetsov wrote:
> Maya Nakamura <m.maya.nakamura@gmail.com> writes:
> 
> > Remove a duplicate definition of VP set (hv_vp_set) and use the common
> > definition (hv_vpset) that is used in other places.
> >
> > Change the order of the members in struct hv_pcibus_device so that the
> > declaration of retarget_msi_interrupt_params is the last member. Struct
> > hv_vpset, which contains a flexible array, is nested two levels deep in
> > struct hv_pcibus_device via retarget_msi_interrupt_params.
> >
> > Add a comment that retarget_msi_interrupt_params should be the last member
> > of struct hv_pcibus_device.
> >
> > Signed-off-by: Maya Nakamura <m.maya.nakamura@gmail.com>
> > ---
> > Change in v3:
> > - Correct the v2 change log.
> >
> > Change in v2:
> > - Update the commit message.
> >
> >  drivers/pci/controller/pci-hyperv.c | 25 ++++++++++++-------------
> >  1 file changed, 12 insertions(+), 13 deletions(-)
> >
> > diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c
> > index 9ba4d12c179c..da8b58d8630d 100644
> > --- a/drivers/pci/controller/pci-hyperv.c
> > +++ b/drivers/pci/controller/pci-hyperv.c
> > @@ -393,12 +393,6 @@ struct hv_interrupt_entry {
> >  
> >  #define HV_VP_SET_BANK_COUNT_MAX	5 /* current implementation limit */
> >  
> > -struct hv_vp_set {
> > -	u64	format;			/* 0 (HvGenericSetSparse4k) */
> > -	u64	valid_banks;
> > -	u64	masks[HV_VP_SET_BANK_COUNT_MAX];
> > -};
> > -
> >  /*
> >   * flags for hv_device_interrupt_target.flags
> >   */
> > @@ -410,7 +404,7 @@ struct hv_device_interrupt_target {
> >  	u32	flags;
> >  	union {
> >  		u64		 vp_mask;
> > -		struct hv_vp_set vp_set;
> > +		struct hv_vpset vp_set;
> >  	};
> >  };
> >  
> > @@ -460,12 +454,16 @@ struct hv_pcibus_device {
> >  	struct msi_controller msi_chip;
> >  	struct irq_domain *irq_domain;
> >  
> > -	/* hypercall arg, must not cross page boundary */
> > -	struct retarget_msi_interrupt retarget_msi_interrupt_params;
> > -
> >  	spinlock_t retarget_msi_interrupt_lock;
> >  
> >  	struct workqueue_struct *wq;
> > +
> > +	/* hypercall arg, must not cross page boundary */
> > +	struct retarget_msi_interrupt retarget_msi_interrupt_params;
> > +
> 
> One more thing here (and again sorry for being late): this structure is
> being used as Hyper-V hypercall argument and these have special
> requirements on alignment (8 bytes). struct retarget_msi_interrupt is
> packed and depending on your environment/compiler you may or may not see
> the issue but I has able to get HVCALL_RETARGET_INTERRUPT failing with
> the return value of 4 (HV_STATUS_INVALID_ALIGNMENT).
> 
> I suggest we add __aligned(8) to 'struct retarget_msi_interrupt'
> definition (I haven't tested this but should work). This is not a new
> issue, it existed before your patch, but the code movement you do may
> change the exposure.

I am happy to apply this small fix _before_ this patch but if you want
me to merge them for v5.1 this must be put together and tested quite
quickly.

For the time being I am not dropping this patch from the PCI queue,
waiting for an update from you guys.

Thanks,
Lorenzo

> 
> 
> > +	/*
> > +	 * Don't put anything here: retarget_msi_interrupt_params must be last
> > +	 */
> >  };
> >  
> >  /*
> > @@ -955,12 +953,13 @@ static void hv_irq_unmask(struct irq_data *data)
> >  		 */
> >  		params->int_target.flags |=
> >  			HV_DEVICE_INTERRUPT_TARGET_PROCESSOR_SET;
> > -		params->int_target.vp_set.valid_banks =
> > +		params->int_target.vp_set.valid_bank_mask =
> >  			(1ull << HV_VP_SET_BANK_COUNT_MAX) - 1;
> >  
> >  		/*
> >  		 * var-sized hypercall, var-size starts after vp_mask (thus
> > -		 * vp_set.format does not count, but vp_set.valid_banks does).
> > +		 * vp_set.format does not count, but vp_set.valid_bank_mask
> > +		 * does).
> >  		 */
> >  		var_size = 1 + HV_VP_SET_BANK_COUNT_MAX;
> >  
> > @@ -974,7 +973,7 @@ static void hv_irq_unmask(struct irq_data *data)
> >  				goto exit_unlock;
> >  			}
> >  
> > -			params->int_target.vp_set.masks[cpu_vmbus / 64] |=
> > +			params->int_target.vp_set.bank_contents[cpu_vmbus / 64]	|=
> >  				(1ULL << (cpu_vmbus & 63));
> >  		}
> >  	} else {
> 
> -- 
> Vitaly

Re: [PATCH v3 1/2] PCI: hv: Replace hv_vp_set with hv_vpset

[Lorenzo Pieralisi]

On Wed, Feb 27, 2019 at 04:53:37PM +0100, Vitaly Kuznetsov wrote:
> Maya Nakamura <m.maya.nakamura@gmail.com> writes:
> 
> > Remove a duplicate definition of VP set (hv_vp_set) and use the common
> > definition (hv_vpset) that is used in other places.
> >
> > Change the order of the members in struct hv_pcibus_device so that the
> > declaration of retarget_msi_interrupt_params is the last member. Struct
> > hv_vpset, which contains a flexible array, is nested two levels deep in
> > struct hv_pcibus_device via retarget_msi_interrupt_params.
> >
> > Add a comment that retarget_msi_interrupt_params should be the last member
> > of struct hv_pcibus_device.
> >
> > Signed-off-by: Maya Nakamura <m.maya.nakamura@gmail.com>
> > ---
> > Change in v3:
> > - Correct the v2 change log.
> >
> > Change in v2:
> > - Update the commit message.
> >
> >  drivers/pci/controller/pci-hyperv.c | 25 ++++++++++++-------------
> >  1 file changed, 12 insertions(+), 13 deletions(-)
> >
> > diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c
> > index 9ba4d12c179c..da8b58d8630d 100644
> > --- a/drivers/pci/controller/pci-hyperv.c
> > +++ b/drivers/pci/controller/pci-hyperv.c
> > @@ -393,12 +393,6 @@ struct hv_interrupt_entry {
> >  
> >  #define HV_VP_SET_BANK_COUNT_MAX	5 /* current implementation limit */
> >  
> > -struct hv_vp_set {
> > -	u64	format;			/* 0 (HvGenericSetSparse4k) */
> > -	u64	valid_banks;
> > -	u64	masks[HV_VP_SET_BANK_COUNT_MAX];
> > -};
> > -
> >  /*
> >   * flags for hv_device_interrupt_target.flags
> >   */
> > @@ -410,7 +404,7 @@ struct hv_device_interrupt_target {
> >  	u32	flags;
> >  	union {
> >  		u64		 vp_mask;
> > -		struct hv_vp_set vp_set;
> > +		struct hv_vpset vp_set;
> >  	};
> >  };
> >  
> > @@ -460,12 +454,16 @@ struct hv_pcibus_device {
> >  	struct msi_controller msi_chip;
> >  	struct irq_domain *irq_domain;
> >  
> > -	/* hypercall arg, must not cross page boundary */
> > -	struct retarget_msi_interrupt retarget_msi_interrupt_params;
> > -
> >  	spinlock_t retarget_msi_interrupt_lock;
> >  
> >  	struct workqueue_struct *wq;
> > +
> > +	/* hypercall arg, must not cross page boundary */
> > +	struct retarget_msi_interrupt retarget_msi_interrupt_params;
> > +
> 
> One more thing here (and again sorry for being late): this structure is
> being used as Hyper-V hypercall argument and these have special
> requirements on alignment (8 bytes). struct retarget_msi_interrupt is
> packed and depending on your environment/compiler you may or may not see
> the issue but I has able to get HVCALL_RETARGET_INTERRUPT failing with
> the return value of 4 (HV_STATUS_INVALID_ALIGNMENT).
> 
> I suggest we add __aligned(8) to 'struct retarget_msi_interrupt'
> definition (I haven't tested this but should work). This is not a new
> issue, it existed before your patch, but the code movement you do may
> change the exposure.

I am happy to apply this small fix _before_ this patch but if you want
me to merge them for v5.1 this must be put together and tested quite
quickly.

For the time being I am not dropping this patch from the PCI queue,
waiting for an update from you guys.

Thanks,
Lorenzo

> 
> 
> > +	/*
> > +	 * Don't put anything here: retarget_msi_interrupt_params must be last
> > +	 */
> >  };
> >  
> >  /*
> > @@ -955,12 +953,13 @@ static void hv_irq_unmask(struct irq_data *data)
> >  		 */
> >  		params->int_target.flags |=
> >  			HV_DEVICE_INTERRUPT_TARGET_PROCESSOR_SET;
> > -		params->int_target.vp_set.valid_banks =
> > +		params->int_target.vp_set.valid_bank_mask =
> >  			(1ull << HV_VP_SET_BANK_COUNT_MAX) - 1;
> >  
> >  		/*
> >  		 * var-sized hypercall, var-size starts after vp_mask (thus
> > -		 * vp_set.format does not count, but vp_set.valid_banks does).
> > +		 * vp_set.format does not count, but vp_set.valid_bank_mask
> > +		 * does).
> >  		 */
> >  		var_size = 1 + HV_VP_SET_BANK_COUNT_MAX;
> >  
> > @@ -974,7 +973,7 @@ static void hv_irq_unmask(struct irq_data *data)
> >  				goto exit_unlock;
> >  			}
> >  
> > -			params->int_target.vp_set.masks[cpu_vmbus / 64] |=
> > +			params->int_target.vp_set.bank_contents[cpu_vmbus / 64]	|=
> >  				(1ULL << (cpu_vmbus & 63));
> >  		}
> >  	} else {
> 
> -- 
> Vitaly
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

[PATCH v3 2/2] PCI: hv: Refactor hv_irq_unmask() to use cpumask_to_vpset()

[Maya Nakamura]

Remove the duplicate implementation of cpumask_to_vpset() and use the
shared implementation. Export hv_max_vp_index, which is required by
cpumask_to_vpset().

Apply changes to hv_irq_unmask() based on feedback.

Signed-off-by: Maya Nakamura <m.maya.nakamura@gmail.com>
---
Changes in v3:
 - Modify to catch all failures from cpumask_to_vpset().
 - Correct the v2 change log about the commit message.

Changes in v2:
 - Remove unnecessary nr_bank initialization.
 - Delete two unnecessary dev_err()'s.
 - Unlock before returning.
 - Update the commit message.

 arch/x86/hyperv/hv_init.c           |  1 +
 drivers/pci/controller/pci-hyperv.c | 38 +++++++++++++----------------
 2 files changed, 18 insertions(+), 21 deletions(-)

diff --git a/arch/x86/hyperv/hv_init.c b/arch/x86/hyperv/hv_init.c
index 7abb09e2eeb8..7f2eed1fc81b 100644
--- a/arch/x86/hyperv/hv_init.c
+++ b/arch/x86/hyperv/hv_init.c
@@ -96,6 +96,7 @@ void  __percpu **hyperv_pcpu_input_arg;
 EXPORT_SYMBOL_GPL(hyperv_pcpu_input_arg);
 
 u32 hv_max_vp_index;
+EXPORT_SYMBOL_GPL(hv_max_vp_index);
 
 static int hv_cpu_init(unsigned int cpu)
 {
diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c
index da8b58d8630d..a78def332bbc 100644
--- a/drivers/pci/controller/pci-hyperv.c
+++ b/drivers/pci/controller/pci-hyperv.c
@@ -391,8 +391,6 @@ struct hv_interrupt_entry {
 	u32	data;
 };
 
-#define HV_VP_SET_BANK_COUNT_MAX	5 /* current implementation limit */
-
 /*
  * flags for hv_device_interrupt_target.flags
  */
@@ -908,12 +906,12 @@ static void hv_irq_unmask(struct irq_data *data)
 	struct retarget_msi_interrupt *params;
 	struct hv_pcibus_device *hbus;
 	struct cpumask *dest;
+	cpumask_var_t tmp;
 	struct pci_bus *pbus;
 	struct pci_dev *pdev;
 	unsigned long flags;
 	u32 var_size = 0;
-	int cpu_vmbus;
-	int cpu;
+	int cpu, nr_bank;
 	u64 res;
 
 	dest = irq_data_get_effective_affinity_mask(data);
@@ -953,29 +951,27 @@ static void hv_irq_unmask(struct irq_data *data)
 		 */
 		params->int_target.flags |=
 			HV_DEVICE_INTERRUPT_TARGET_PROCESSOR_SET;
-		params->int_target.vp_set.valid_bank_mask =
-			(1ull << HV_VP_SET_BANK_COUNT_MAX) - 1;
+
+		if (!alloc_cpumask_var(&tmp, GFP_KERNEL)) {
+			res = 1;
+			goto exit_unlock;
+		}
+
+		cpumask_and(tmp, dest, cpu_online_mask);
+		nr_bank = cpumask_to_vpset(&params->int_target.vp_set, tmp);
+		free_cpumask_var(tmp);
+
+		if (nr_bank <= 0) {
+			res = 1;
+			goto exit_unlock;
+		}
 
 		/*
 		 * var-sized hypercall, var-size starts after vp_mask (thus
 		 * vp_set.format does not count, but vp_set.valid_bank_mask
 		 * does).
 		 */
-		var_size = 1 + HV_VP_SET_BANK_COUNT_MAX;
-
-		for_each_cpu_and(cpu, dest, cpu_online_mask) {
-			cpu_vmbus = hv_cpu_number_to_vp_number(cpu);
-
-			if (cpu_vmbus >= HV_VP_SET_BANK_COUNT_MAX * 64) {
-				dev_err(&hbus->hdev->device,
-					"too high CPU %d", cpu_vmbus);
-				res = 1;
-				goto exit_unlock;
-			}
-
-			params->int_target.vp_set.bank_contents[cpu_vmbus / 64]	|=
-				(1ULL << (cpu_vmbus & 63));
-		}
+		var_size = 1 + nr_bank;
 	} else {
 		for_each_cpu_and(cpu, dest, cpu_online_mask) {
 			params->int_target.vp_mask |=
-- 
2.17.1

[PATCH v3 2/2] PCI: hv: Refactor hv_irq_unmask() to use cpumask_to_vpset()

[Maya Nakamura]

Remove the duplicate implementation of cpumask_to_vpset() and use the
shared implementation. Export hv_max_vp_index, which is required by
cpumask_to_vpset().

Apply changes to hv_irq_unmask() based on feedback.

Signed-off-by: Maya Nakamura <m.maya.nakamura@gmail.com>
---
Changes in v3:
 - Modify to catch all failures from cpumask_to_vpset().
 - Correct the v2 change log about the commit message.

Changes in v2:
 - Remove unnecessary nr_bank initialization.
 - Delete two unnecessary dev_err()'s.
 - Unlock before returning.
 - Update the commit message.

 arch/x86/hyperv/hv_init.c           |  1 +
 drivers/pci/controller/pci-hyperv.c | 38 +++++++++++++----------------
 2 files changed, 18 insertions(+), 21 deletions(-)

diff --git a/arch/x86/hyperv/hv_init.c b/arch/x86/hyperv/hv_init.c
index 7abb09e2eeb8..7f2eed1fc81b 100644
--- a/arch/x86/hyperv/hv_init.c
+++ b/arch/x86/hyperv/hv_init.c
@@ -96,6 +96,7 @@ void  __percpu **hyperv_pcpu_input_arg;
 EXPORT_SYMBOL_GPL(hyperv_pcpu_input_arg);
 
 u32 hv_max_vp_index;
+EXPORT_SYMBOL_GPL(hv_max_vp_index);
 
 static int hv_cpu_init(unsigned int cpu)
 {
diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c
index da8b58d8630d..a78def332bbc 100644
--- a/drivers/pci/controller/pci-hyperv.c
+++ b/drivers/pci/controller/pci-hyperv.c
@@ -391,8 +391,6 @@ struct hv_interrupt_entry {
 	u32	data;
 };
 
-#define HV_VP_SET_BANK_COUNT_MAX	5 /* current implementation limit */
-
 /*
  * flags for hv_device_interrupt_target.flags
  */
@@ -908,12 +906,12 @@ static void hv_irq_unmask(struct irq_data *data)
 	struct retarget_msi_interrupt *params;
 	struct hv_pcibus_device *hbus;
 	struct cpumask *dest;
+	cpumask_var_t tmp;
 	struct pci_bus *pbus;
 	struct pci_dev *pdev;
 	unsigned long flags;
 	u32 var_size = 0;
-	int cpu_vmbus;
-	int cpu;
+	int cpu, nr_bank;
 	u64 res;
 
 	dest = irq_data_get_effective_affinity_mask(data);
@@ -953,29 +951,27 @@ static void hv_irq_unmask(struct irq_data *data)
 		 */
 		params->int_target.flags |=
 			HV_DEVICE_INTERRUPT_TARGET_PROCESSOR_SET;
-		params->int_target.vp_set.valid_bank_mask =
-			(1ull << HV_VP_SET_BANK_COUNT_MAX) - 1;
+
+		if (!alloc_cpumask_var(&tmp, GFP_KERNEL)) {
+			res = 1;
+			goto exit_unlock;
+		}
+
+		cpumask_and(tmp, dest, cpu_online_mask);
+		nr_bank = cpumask_to_vpset(&params->int_target.vp_set, tmp);
+		free_cpumask_var(tmp);
+
+		if (nr_bank <= 0) {
+			res = 1;
+			goto exit_unlock;
+		}
 
 		/*
 		 * var-sized hypercall, var-size starts after vp_mask (thus
 		 * vp_set.format does not count, but vp_set.valid_bank_mask
 		 * does).
 		 */
-		var_size = 1 + HV_VP_SET_BANK_COUNT_MAX;
-
-		for_each_cpu_and(cpu, dest, cpu_online_mask) {
-			cpu_vmbus = hv_cpu_number_to_vp_number(cpu);
-
-			if (cpu_vmbus >= HV_VP_SET_BANK_COUNT_MAX * 64) {
-				dev_err(&hbus->hdev->device,
-					"too high CPU %d", cpu_vmbus);
-				res = 1;
-				goto exit_unlock;
-			}
-
-			params->int_target.vp_set.bank_contents[cpu_vmbus / 64]	|=
-				(1ULL << (cpu_vmbus & 63));
-		}
+		var_size = 1 + nr_bank;
 	} else {
 		for_each_cpu_and(cpu, dest, cpu_online_mask) {
 			params->int_target.vp_mask |=
-- 
2.17.1

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

RE: [PATCH v3 2/2] PCI: hv: Refactor hv_irq_unmask() to use cpumask_to_vpset()

[Michael Kelley]

From: Maya Nakamura <m.maya.nakamura@gmail.com> Sent: Monday, January 28, 2019 11:21 PM
> 
> Remove the duplicate implementation of cpumask_to_vpset() and use the
> shared implementation. Export hv_max_vp_index, which is required by
> cpumask_to_vpset().
> 
> Apply changes to hv_irq_unmask() based on feedback.
> 
> Signed-off-by: Maya Nakamura <m.maya.nakamura@gmail.com>
> ---
> Changes in v3:
>  - Modify to catch all failures from cpumask_to_vpset().
>  - Correct the v2 change log about the commit message.
> 
> Changes in v2:
>  - Remove unnecessary nr_bank initialization.
>  - Delete two unnecessary dev_err()'s.
>  - Unlock before returning.
>  - Update the commit message.
> 
Reviewed-by:  Michael Kelley <mikelley@microsoft.com>
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

Re: [PATCH v3 2/2] PCI: hv: Refactor hv_irq_unmask() to use cpumask_to_vpset()

[Vitaly Kuznetsov]

Maya Nakamura <m.maya.nakamura@gmail.com> writes:

> Remove the duplicate implementation of cpumask_to_vpset() and use the
> shared implementation. Export hv_max_vp_index, which is required by
> cpumask_to_vpset().
>
> Apply changes to hv_irq_unmask() based on feedback.
>

I just noticed an issue with this patch, sorry I've missed it before. I
don't see the commit in Linus' tree, not sure if we should amend this
one or a follow-up patch is needed.

> Signed-off-by: Maya Nakamura <m.maya.nakamura@gmail.com>
> ---
> Changes in v3:
>  - Modify to catch all failures from cpumask_to_vpset().
>  - Correct the v2 change log about the commit message.
>
> Changes in v2:
>  - Remove unnecessary nr_bank initialization.
>  - Delete two unnecessary dev_err()'s.
>  - Unlock before returning.
>  - Update the commit message.
>
>  arch/x86/hyperv/hv_init.c           |  1 +
>  drivers/pci/controller/pci-hyperv.c | 38 +++++++++++++----------------
>  2 files changed, 18 insertions(+), 21 deletions(-)
>
> diff --git a/arch/x86/hyperv/hv_init.c b/arch/x86/hyperv/hv_init.c
> index 7abb09e2eeb8..7f2eed1fc81b 100644
> --- a/arch/x86/hyperv/hv_init.c
> +++ b/arch/x86/hyperv/hv_init.c
> @@ -96,6 +96,7 @@ void  __percpu **hyperv_pcpu_input_arg;
>  EXPORT_SYMBOL_GPL(hyperv_pcpu_input_arg);
>  
>  u32 hv_max_vp_index;
> +EXPORT_SYMBOL_GPL(hv_max_vp_index);
>  
>  static int hv_cpu_init(unsigned int cpu)
>  {
> diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c
> index da8b58d8630d..a78def332bbc 100644
> --- a/drivers/pci/controller/pci-hyperv.c
> +++ b/drivers/pci/controller/pci-hyperv.c
> @@ -391,8 +391,6 @@ struct hv_interrupt_entry {
>  	u32	data;
>  };
>  
> -#define HV_VP_SET_BANK_COUNT_MAX	5 /* current implementation limit */
> -
>  /*
>   * flags for hv_device_interrupt_target.flags
>   */
> @@ -908,12 +906,12 @@ static void hv_irq_unmask(struct irq_data *data)
>  	struct retarget_msi_interrupt *params;
>  	struct hv_pcibus_device *hbus;
>  	struct cpumask *dest;
> +	cpumask_var_t tmp;
>  	struct pci_bus *pbus;
>  	struct pci_dev *pdev;
>  	unsigned long flags;
>  	u32 var_size = 0;
> -	int cpu_vmbus;
> -	int cpu;
> +	int cpu, nr_bank;
>  	u64 res;
>  
>  	dest = irq_data_get_effective_affinity_mask(data);
> @@ -953,29 +951,27 @@ static void hv_irq_unmask(struct irq_data *data)
>  		 */
>  		params->int_target.flags |=
>  			HV_DEVICE_INTERRUPT_TARGET_PROCESSOR_SET;
> -		params->int_target.vp_set.valid_bank_mask =
> -			(1ull << HV_VP_SET_BANK_COUNT_MAX) - 1;
> +
> +		if (!alloc_cpumask_var(&tmp, GFP_KERNEL)) {

We can't use GFP_KERNEL here: this is happening under
hbus->retarget_msi_interrupt_lock spinlock, we should use GFP_ATOMIC
instead. It may, however, make sense to add the cpumask to a
pre-allocated structure (e.g. struct hv_pcibus_device) to make sure the
allocation never fails.

> +			res = 1;
> +			goto exit_unlock;
> +		}
> +
> +		cpumask_and(tmp, dest, cpu_online_mask);
> +		nr_bank = cpumask_to_vpset(&params->int_target.vp_set, tmp);
> +		free_cpumask_var(tmp);
> +
> +		if (nr_bank <= 0) {
> +			res = 1;
> +			goto exit_unlock;
> +		}
>  
>  		/*
>  		 * var-sized hypercall, var-size starts after vp_mask (thus
>  		 * vp_set.format does not count, but vp_set.valid_bank_mask
>  		 * does).
>  		 */
> -		var_size = 1 + HV_VP_SET_BANK_COUNT_MAX;
> -
> -		for_each_cpu_and(cpu, dest, cpu_online_mask) {
> -			cpu_vmbus = hv_cpu_number_to_vp_number(cpu);
> -
> -			if (cpu_vmbus >= HV_VP_SET_BANK_COUNT_MAX * 64) {
> -				dev_err(&hbus->hdev->device,
> -					"too high CPU %d", cpu_vmbus);
> -				res = 1;
> -				goto exit_unlock;
> -			}
> -
> -			params->int_target.vp_set.bank_contents[cpu_vmbus / 64]	|=
> -				(1ULL << (cpu_vmbus & 63));
> -		}
> +		var_size = 1 + nr_bank;
>  	} else {
>  		for_each_cpu_and(cpu, dest, cpu_online_mask) {
>  			params->int_target.vp_mask |=

-- 
Vitaly

Re: [PATCH v3 2/2] PCI: hv: Refactor hv_irq_unmask() to use cpumask_to_vpset()

[Vitaly Kuznetsov]

Maya Nakamura <m.maya.nakamura@gmail.com> writes:

> Remove the duplicate implementation of cpumask_to_vpset() and use the
> shared implementation. Export hv_max_vp_index, which is required by
> cpumask_to_vpset().
>
> Apply changes to hv_irq_unmask() based on feedback.
>

I just noticed an issue with this patch, sorry I've missed it before. I
don't see the commit in Linus' tree, not sure if we should amend this
one or a follow-up patch is needed.

> Signed-off-by: Maya Nakamura <m.maya.nakamura@gmail.com>
> ---
> Changes in v3:
>  - Modify to catch all failures from cpumask_to_vpset().
>  - Correct the v2 change log about the commit message.
>
> Changes in v2:
>  - Remove unnecessary nr_bank initialization.
>  - Delete two unnecessary dev_err()'s.
>  - Unlock before returning.
>  - Update the commit message.
>
>  arch/x86/hyperv/hv_init.c           |  1 +
>  drivers/pci/controller/pci-hyperv.c | 38 +++++++++++++----------------
>  2 files changed, 18 insertions(+), 21 deletions(-)
>
> diff --git a/arch/x86/hyperv/hv_init.c b/arch/x86/hyperv/hv_init.c
> index 7abb09e2eeb8..7f2eed1fc81b 100644
> --- a/arch/x86/hyperv/hv_init.c
> +++ b/arch/x86/hyperv/hv_init.c
> @@ -96,6 +96,7 @@ void  __percpu **hyperv_pcpu_input_arg;
>  EXPORT_SYMBOL_GPL(hyperv_pcpu_input_arg);
>  
>  u32 hv_max_vp_index;
> +EXPORT_SYMBOL_GPL(hv_max_vp_index);
>  
>  static int hv_cpu_init(unsigned int cpu)
>  {
> diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c
> index da8b58d8630d..a78def332bbc 100644
> --- a/drivers/pci/controller/pci-hyperv.c
> +++ b/drivers/pci/controller/pci-hyperv.c
> @@ -391,8 +391,6 @@ struct hv_interrupt_entry {
>  	u32	data;
>  };
>  
> -#define HV_VP_SET_BANK_COUNT_MAX	5 /* current implementation limit */
> -
>  /*
>   * flags for hv_device_interrupt_target.flags
>   */
> @@ -908,12 +906,12 @@ static void hv_irq_unmask(struct irq_data *data)
>  	struct retarget_msi_interrupt *params;
>  	struct hv_pcibus_device *hbus;
>  	struct cpumask *dest;
> +	cpumask_var_t tmp;
>  	struct pci_bus *pbus;
>  	struct pci_dev *pdev;
>  	unsigned long flags;
>  	u32 var_size = 0;
> -	int cpu_vmbus;
> -	int cpu;
> +	int cpu, nr_bank;
>  	u64 res;
>  
>  	dest = irq_data_get_effective_affinity_mask(data);
> @@ -953,29 +951,27 @@ static void hv_irq_unmask(struct irq_data *data)
>  		 */
>  		params->int_target.flags |=
>  			HV_DEVICE_INTERRUPT_TARGET_PROCESSOR_SET;
> -		params->int_target.vp_set.valid_bank_mask =
> -			(1ull << HV_VP_SET_BANK_COUNT_MAX) - 1;
> +
> +		if (!alloc_cpumask_var(&tmp, GFP_KERNEL)) {

We can't use GFP_KERNEL here: this is happening under
hbus->retarget_msi_interrupt_lock spinlock, we should use GFP_ATOMIC
instead. It may, however, make sense to add the cpumask to a
pre-allocated structure (e.g. struct hv_pcibus_device) to make sure the
allocation never fails.

> +			res = 1;
> +			goto exit_unlock;
> +		}
> +
> +		cpumask_and(tmp, dest, cpu_online_mask);
> +		nr_bank = cpumask_to_vpset(&params->int_target.vp_set, tmp);
> +		free_cpumask_var(tmp);
> +
> +		if (nr_bank <= 0) {
> +			res = 1;
> +			goto exit_unlock;
> +		}
>  
>  		/*
>  		 * var-sized hypercall, var-size starts after vp_mask (thus
>  		 * vp_set.format does not count, but vp_set.valid_bank_mask
>  		 * does).
>  		 */
> -		var_size = 1 + HV_VP_SET_BANK_COUNT_MAX;
> -
> -		for_each_cpu_and(cpu, dest, cpu_online_mask) {
> -			cpu_vmbus = hv_cpu_number_to_vp_number(cpu);
> -
> -			if (cpu_vmbus >= HV_VP_SET_BANK_COUNT_MAX * 64) {
> -				dev_err(&hbus->hdev->device,
> -					"too high CPU %d", cpu_vmbus);
> -				res = 1;
> -				goto exit_unlock;
> -			}
> -
> -			params->int_target.vp_set.bank_contents[cpu_vmbus / 64]	|=
> -				(1ULL << (cpu_vmbus & 63));
> -		}
> +		var_size = 1 + nr_bank;
>  	} else {
>  		for_each_cpu_and(cpu, dest, cpu_online_mask) {
>  			params->int_target.vp_mask |=

-- 
Vitaly
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

Re: [PATCH v3 2/2] PCI: hv: Refactor hv_irq_unmask() to use cpumask_to_vpset()

[Lorenzo Pieralisi]

On Wed, Feb 27, 2019 at 01:34:44PM +0100, Vitaly Kuznetsov wrote:
> Maya Nakamura <m.maya.nakamura@gmail.com> writes:
> 
> > Remove the duplicate implementation of cpumask_to_vpset() and use the
> > shared implementation. Export hv_max_vp_index, which is required by
> > cpumask_to_vpset().
> >
> > Apply changes to hv_irq_unmask() based on feedback.
> >
> 
> I just noticed an issue with this patch, sorry I've missed it before. I
> don't see the commit in Linus' tree, not sure if we should amend this
> one or a follow-up patch is needed.

I will drop this patch from the PCI queue, it does not make sense
to merge a patch adding a bug and fix it up later with a subsequent
one given that it is not upstream yet.

Lorenzo

> > Signed-off-by: Maya Nakamura <m.maya.nakamura@gmail.com>
> > ---
> > Changes in v3:
> >  - Modify to catch all failures from cpumask_to_vpset().
> >  - Correct the v2 change log about the commit message.
> >
> > Changes in v2:
> >  - Remove unnecessary nr_bank initialization.
> >  - Delete two unnecessary dev_err()'s.
> >  - Unlock before returning.
> >  - Update the commit message.
> >
> >  arch/x86/hyperv/hv_init.c           |  1 +
> >  drivers/pci/controller/pci-hyperv.c | 38 +++++++++++++----------------
> >  2 files changed, 18 insertions(+), 21 deletions(-)
> >
> > diff --git a/arch/x86/hyperv/hv_init.c b/arch/x86/hyperv/hv_init.c
> > index 7abb09e2eeb8..7f2eed1fc81b 100644
> > --- a/arch/x86/hyperv/hv_init.c
> > +++ b/arch/x86/hyperv/hv_init.c
> > @@ -96,6 +96,7 @@ void  __percpu **hyperv_pcpu_input_arg;
> >  EXPORT_SYMBOL_GPL(hyperv_pcpu_input_arg);
> >  
> >  u32 hv_max_vp_index;
> > +EXPORT_SYMBOL_GPL(hv_max_vp_index);
> >  
> >  static int hv_cpu_init(unsigned int cpu)
> >  {
> > diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c
> > index da8b58d8630d..a78def332bbc 100644
> > --- a/drivers/pci/controller/pci-hyperv.c
> > +++ b/drivers/pci/controller/pci-hyperv.c
> > @@ -391,8 +391,6 @@ struct hv_interrupt_entry {
> >  	u32	data;
> >  };
> >  
> > -#define HV_VP_SET_BANK_COUNT_MAX	5 /* current implementation limit */
> > -
> >  /*
> >   * flags for hv_device_interrupt_target.flags
> >   */
> > @@ -908,12 +906,12 @@ static void hv_irq_unmask(struct irq_data *data)
> >  	struct retarget_msi_interrupt *params;
> >  	struct hv_pcibus_device *hbus;
> >  	struct cpumask *dest;
> > +	cpumask_var_t tmp;
> >  	struct pci_bus *pbus;
> >  	struct pci_dev *pdev;
> >  	unsigned long flags;
> >  	u32 var_size = 0;
> > -	int cpu_vmbus;
> > -	int cpu;
> > +	int cpu, nr_bank;
> >  	u64 res;
> >  
> >  	dest = irq_data_get_effective_affinity_mask(data);
> > @@ -953,29 +951,27 @@ static void hv_irq_unmask(struct irq_data *data)
> >  		 */
> >  		params->int_target.flags |=
> >  			HV_DEVICE_INTERRUPT_TARGET_PROCESSOR_SET;
> > -		params->int_target.vp_set.valid_bank_mask =
> > -			(1ull << HV_VP_SET_BANK_COUNT_MAX) - 1;
> > +
> > +		if (!alloc_cpumask_var(&tmp, GFP_KERNEL)) {
> 
> We can't use GFP_KERNEL here: this is happening under
> hbus->retarget_msi_interrupt_lock spinlock, we should use GFP_ATOMIC
> instead. It may, however, make sense to add the cpumask to a
> pre-allocated structure (e.g. struct hv_pcibus_device) to make sure the
> allocation never fails.
> 
> > +			res = 1;
> > +			goto exit_unlock;
> > +		}
> > +
> > +		cpumask_and(tmp, dest, cpu_online_mask);
> > +		nr_bank = cpumask_to_vpset(&params->int_target.vp_set, tmp);
> > +		free_cpumask_var(tmp);
> > +
> > +		if (nr_bank <= 0) {
> > +			res = 1;
> > +			goto exit_unlock;
> > +		}
> >  
> >  		/*
> >  		 * var-sized hypercall, var-size starts after vp_mask (thus
> >  		 * vp_set.format does not count, but vp_set.valid_bank_mask
> >  		 * does).
> >  		 */
> > -		var_size = 1 + HV_VP_SET_BANK_COUNT_MAX;
> > -
> > -		for_each_cpu_and(cpu, dest, cpu_online_mask) {
> > -			cpu_vmbus = hv_cpu_number_to_vp_number(cpu);
> > -
> > -			if (cpu_vmbus >= HV_VP_SET_BANK_COUNT_MAX * 64) {
> > -				dev_err(&hbus->hdev->device,
> > -					"too high CPU %d", cpu_vmbus);
> > -				res = 1;
> > -				goto exit_unlock;
> > -			}
> > -
> > -			params->int_target.vp_set.bank_contents[cpu_vmbus / 64]	|=
> > -				(1ULL << (cpu_vmbus & 63));
> > -		}
> > +		var_size = 1 + nr_bank;
> >  	} else {
> >  		for_each_cpu_and(cpu, dest, cpu_online_mask) {
> >  			params->int_target.vp_mask |=
> 
> -- 
> Vitaly

Re: [PATCH v3 2/2] PCI: hv: Refactor hv_irq_unmask() to use cpumask_to_vpset()

[Lorenzo Pieralisi]

On Wed, Feb 27, 2019 at 01:34:44PM +0100, Vitaly Kuznetsov wrote:
> Maya Nakamura <m.maya.nakamura@gmail.com> writes:
> 
> > Remove the duplicate implementation of cpumask_to_vpset() and use the
> > shared implementation. Export hv_max_vp_index, which is required by
> > cpumask_to_vpset().
> >
> > Apply changes to hv_irq_unmask() based on feedback.
> >
> 
> I just noticed an issue with this patch, sorry I've missed it before. I
> don't see the commit in Linus' tree, not sure if we should amend this
> one or a follow-up patch is needed.

I will drop this patch from the PCI queue, it does not make sense
to merge a patch adding a bug and fix it up later with a subsequent
one given that it is not upstream yet.

Lorenzo

> > Signed-off-by: Maya Nakamura <m.maya.nakamura@gmail.com>
> > ---
> > Changes in v3:
> >  - Modify to catch all failures from cpumask_to_vpset().
> >  - Correct the v2 change log about the commit message.
> >
> > Changes in v2:
> >  - Remove unnecessary nr_bank initialization.
> >  - Delete two unnecessary dev_err()'s.
> >  - Unlock before returning.
> >  - Update the commit message.
> >
> >  arch/x86/hyperv/hv_init.c           |  1 +
> >  drivers/pci/controller/pci-hyperv.c | 38 +++++++++++++----------------
> >  2 files changed, 18 insertions(+), 21 deletions(-)
> >
> > diff --git a/arch/x86/hyperv/hv_init.c b/arch/x86/hyperv/hv_init.c
> > index 7abb09e2eeb8..7f2eed1fc81b 100644
> > --- a/arch/x86/hyperv/hv_init.c
> > +++ b/arch/x86/hyperv/hv_init.c
> > @@ -96,6 +96,7 @@ void  __percpu **hyperv_pcpu_input_arg;
> >  EXPORT_SYMBOL_GPL(hyperv_pcpu_input_arg);
> >  
> >  u32 hv_max_vp_index;
> > +EXPORT_SYMBOL_GPL(hv_max_vp_index);
> >  
> >  static int hv_cpu_init(unsigned int cpu)
> >  {
> > diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c
> > index da8b58d8630d..a78def332bbc 100644
> > --- a/drivers/pci/controller/pci-hyperv.c
> > +++ b/drivers/pci/controller/pci-hyperv.c
> > @@ -391,8 +391,6 @@ struct hv_interrupt_entry {
> >  	u32	data;
> >  };
> >  
> > -#define HV_VP_SET_BANK_COUNT_MAX	5 /* current implementation limit */
> > -
> >  /*
> >   * flags for hv_device_interrupt_target.flags
> >   */
> > @@ -908,12 +906,12 @@ static void hv_irq_unmask(struct irq_data *data)
> >  	struct retarget_msi_interrupt *params;
> >  	struct hv_pcibus_device *hbus;
> >  	struct cpumask *dest;
> > +	cpumask_var_t tmp;
> >  	struct pci_bus *pbus;
> >  	struct pci_dev *pdev;
> >  	unsigned long flags;
> >  	u32 var_size = 0;
> > -	int cpu_vmbus;
> > -	int cpu;
> > +	int cpu, nr_bank;
> >  	u64 res;
> >  
> >  	dest = irq_data_get_effective_affinity_mask(data);
> > @@ -953,29 +951,27 @@ static void hv_irq_unmask(struct irq_data *data)
> >  		 */
> >  		params->int_target.flags |=
> >  			HV_DEVICE_INTERRUPT_TARGET_PROCESSOR_SET;
> > -		params->int_target.vp_set.valid_bank_mask =
> > -			(1ull << HV_VP_SET_BANK_COUNT_MAX) - 1;
> > +
> > +		if (!alloc_cpumask_var(&tmp, GFP_KERNEL)) {
> 
> We can't use GFP_KERNEL here: this is happening under
> hbus->retarget_msi_interrupt_lock spinlock, we should use GFP_ATOMIC
> instead. It may, however, make sense to add the cpumask to a
> pre-allocated structure (e.g. struct hv_pcibus_device) to make sure the
> allocation never fails.
> 
> > +			res = 1;
> > +			goto exit_unlock;
> > +		}
> > +
> > +		cpumask_and(tmp, dest, cpu_online_mask);
> > +		nr_bank = cpumask_to_vpset(&params->int_target.vp_set, tmp);
> > +		free_cpumask_var(tmp);
> > +
> > +		if (nr_bank <= 0) {
> > +			res = 1;
> > +			goto exit_unlock;
> > +		}
> >  
> >  		/*
> >  		 * var-sized hypercall, var-size starts after vp_mask (thus
> >  		 * vp_set.format does not count, but vp_set.valid_bank_mask
> >  		 * does).
> >  		 */
> > -		var_size = 1 + HV_VP_SET_BANK_COUNT_MAX;
> > -
> > -		for_each_cpu_and(cpu, dest, cpu_online_mask) {
> > -			cpu_vmbus = hv_cpu_number_to_vp_number(cpu);
> > -
> > -			if (cpu_vmbus >= HV_VP_SET_BANK_COUNT_MAX * 64) {
> > -				dev_err(&hbus->hdev->device,
> > -					"too high CPU %d", cpu_vmbus);
> > -				res = 1;
> > -				goto exit_unlock;
> > -			}
> > -
> > -			params->int_target.vp_set.bank_contents[cpu_vmbus / 64]	|=
> > -				(1ULL << (cpu_vmbus & 63));
> > -		}
> > +		var_size = 1 + nr_bank;
> >  	} else {
> >  		for_each_cpu_and(cpu, dest, cpu_online_mask) {
> >  			params->int_target.vp_mask |=
> 
> -- 
> Vitaly
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

Re: [PATCH v3 0/2] PCI: hv: Refactor hv_irq_unmask() to use hv_vpset and cpumask_to_vpset()

[Lorenzo Pieralisi]

On Mon, Jan 28, 2019 at 11:15:37PM -0800, Maya Nakamura wrote:
> This patchset removes a duplicate definition of VP set (hv_vp_set) and
> uses the common definition (hv_vpset) that is used in other places. It
> changes the order of the members in struct hv_pcibus_device due to
> flexible array in hv_vpset.
> 
> It also removes the duplicate implementation of cpumask_to_vpset(), uses
> the shared implementation, and exports hv_max_vp_index, which is
> required by cpumask_to_vpset().
> 
> Maya Nakamura (2):
>   PCI: hv: Replace hv_vp_set with hv_vpset
>   PCI: hv: Refactor hv_irq_unmask() to use cpumask_to_vpset()
> 
>  arch/x86/hyperv/hv_init.c           |  1 +
>  drivers/pci/controller/pci-hyperv.c | 59 +++++++++++++----------------
>  2 files changed, 28 insertions(+), 32 deletions(-)

I need a maintainer ACK to merge this series.

Lorenzo

Re: [PATCH v3 0/2] PCI: hv: Refactor hv_irq_unmask() to use hv_vpset and cpumask_to_vpset()

[Lorenzo Pieralisi]

On Mon, Jan 28, 2019 at 11:15:37PM -0800, Maya Nakamura wrote:
> This patchset removes a duplicate definition of VP set (hv_vp_set) and
> uses the common definition (hv_vpset) that is used in other places. It
> changes the order of the members in struct hv_pcibus_device due to
> flexible array in hv_vpset.
> 
> It also removes the duplicate implementation of cpumask_to_vpset(), uses
> the shared implementation, and exports hv_max_vp_index, which is
> required by cpumask_to_vpset().
> 
> Maya Nakamura (2):
>   PCI: hv: Replace hv_vp_set with hv_vpset
>   PCI: hv: Refactor hv_irq_unmask() to use cpumask_to_vpset()
> 
>  arch/x86/hyperv/hv_init.c           |  1 +
>  drivers/pci/controller/pci-hyperv.c | 59 +++++++++++++----------------
>  2 files changed, 28 insertions(+), 32 deletions(-)

I need a maintainer ACK to merge this series.

Lorenzo
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

Re: [PATCH v3 0/2] PCI: hv: Refactor hv_irq_unmask() to use hv_vpset and cpumask_to_vpset()

[Sasha Levin]

On Wed, Feb 13, 2019 at 03:15:49PM +0000, Lorenzo Pieralisi wrote:
>On Mon, Jan 28, 2019 at 11:15:37PM -0800, Maya Nakamura wrote:
>> This patchset removes a duplicate definition of VP set (hv_vp_set) and
>> uses the common definition (hv_vpset) that is used in other places. It
>> changes the order of the members in struct hv_pcibus_device due to
>> flexible array in hv_vpset.
>>
>> It also removes the duplicate implementation of cpumask_to_vpset(), uses
>> the shared implementation, and exports hv_max_vp_index, which is
>> required by cpumask_to_vpset().
>>
>> Maya Nakamura (2):
>>   PCI: hv: Replace hv_vp_set with hv_vpset
>>   PCI: hv: Refactor hv_irq_unmask() to use cpumask_to_vpset()
>>
>>  arch/x86/hyperv/hv_init.c           |  1 +
>>  drivers/pci/controller/pci-hyperv.c | 59 +++++++++++++----------------
>>  2 files changed, 28 insertions(+), 32 deletions(-)
>
>I need a maintainer ACK to merge this series.

Acked-by: Sasha Levin <sashal@kernel.org>

--
Thanks,
Sasha

Re: [PATCH v3 0/2] PCI: hv: Refactor hv_irq_unmask() to use hv_vpset and cpumask_to_vpset()

[Sasha Levin]

On Wed, Feb 13, 2019 at 03:15:49PM +0000, Lorenzo Pieralisi wrote:
>On Mon, Jan 28, 2019 at 11:15:37PM -0800, Maya Nakamura wrote:
>> This patchset removes a duplicate definition of VP set (hv_vp_set) and
>> uses the common definition (hv_vpset) that is used in other places. It
>> changes the order of the members in struct hv_pcibus_device due to
>> flexible array in hv_vpset.
>>
>> It also removes the duplicate implementation of cpumask_to_vpset(), uses
>> the shared implementation, and exports hv_max_vp_index, which is
>> required by cpumask_to_vpset().
>>
>> Maya Nakamura (2):
>>   PCI: hv: Replace hv_vp_set with hv_vpset
>>   PCI: hv: Refactor hv_irq_unmask() to use cpumask_to_vpset()
>>
>>  arch/x86/hyperv/hv_init.c           |  1 +
>>  drivers/pci/controller/pci-hyperv.c | 59 +++++++++++++----------------
>>  2 files changed, 28 insertions(+), 32 deletions(-)
>
>I need a maintainer ACK to merge this series.

Acked-by: Sasha Levin <sashal@kernel.org>

--
Thanks,
Sasha
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

Re: [PATCH v3 0/2] PCI: hv: Refactor hv_irq_unmask() to use hv_vpset and cpumask_to_vpset()

[Lorenzo Pieralisi]

On Mon, Jan 28, 2019 at 11:15:37PM -0800, Maya Nakamura wrote:
> This patchset removes a duplicate definition of VP set (hv_vp_set) and
> uses the common definition (hv_vpset) that is used in other places. It
> changes the order of the members in struct hv_pcibus_device due to
> flexible array in hv_vpset.
> 
> It also removes the duplicate implementation of cpumask_to_vpset(), uses
> the shared implementation, and exports hv_max_vp_index, which is
> required by cpumask_to_vpset().
> 
> Maya Nakamura (2):
>   PCI: hv: Replace hv_vp_set with hv_vpset
>   PCI: hv: Refactor hv_irq_unmask() to use cpumask_to_vpset()
> 
>  arch/x86/hyperv/hv_init.c           |  1 +
>  drivers/pci/controller/pci-hyperv.c | 59 +++++++++++++----------------
>  2 files changed, 28 insertions(+), 32 deletions(-)

Applied to pci/hv for v5.1, thanks.

Lorenzo

Re: [PATCH v3 0/2] PCI: hv: Refactor hv_irq_unmask() to use hv_vpset and cpumask_to_vpset()

[Lorenzo Pieralisi]

On Mon, Jan 28, 2019 at 11:15:37PM -0800, Maya Nakamura wrote:
> This patchset removes a duplicate definition of VP set (hv_vp_set) and
> uses the common definition (hv_vpset) that is used in other places. It
> changes the order of the members in struct hv_pcibus_device due to
> flexible array in hv_vpset.
> 
> It also removes the duplicate implementation of cpumask_to_vpset(), uses
> the shared implementation, and exports hv_max_vp_index, which is
> required by cpumask_to_vpset().
> 
> Maya Nakamura (2):
>   PCI: hv: Replace hv_vp_set with hv_vpset
>   PCI: hv: Refactor hv_irq_unmask() to use cpumask_to_vpset()
> 
>  arch/x86/hyperv/hv_init.c           |  1 +
>  drivers/pci/controller/pci-hyperv.c | 59 +++++++++++++----------------
>  2 files changed, 28 insertions(+), 32 deletions(-)

Applied to pci/hv for v5.1, thanks.

Lorenzo
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel