All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
To: Landen Chao <Landen.Chao@mediatek.com>,
	DENG Qingfang <dqfext@gmail.com>,
	Sean Wang <sean.wang@mediatek.com>
Cc: Marek Beh__n <kabel@kernel.org>, Andrew Lunn <andrew@lunn.ch>,
	Vivien Didelot <vivien.didelot@gmail.com>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Vladimir Oltean <olteanv@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	netdev@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org
Subject: [PATCH net-next 2/9] net: dsa: mt7530: populate supported_interfaces and mac_capabilities
Date: Wed, 06 Apr 2022 11:48:42 +0100	[thread overview]
Message-ID: <E1nc3DO-004hpp-23@rmk-PC.armlinux.org.uk> (raw)
In-Reply-To: <Yk1iHCy4fqvxsvu0@shell.armlinux.org.uk>

Populate the supported interfaces and MAC capabilities for mt7530,
mt7531 and mt7621 DSA switches. Filling this in will enable phylink
to pre-check the PHY interface mode against the the supported
interfaces bitmap prior to calling the validate function, and will
eventually allow us to convert to using the generic validation.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 drivers/net/dsa/mt7530.c | 74 ++++++++++++++++++++++++++++++++++++++++
 drivers/net/dsa/mt7530.h |  2 ++
 2 files changed, 76 insertions(+)

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 20cadee13361..954d738c75f2 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -2389,6 +2389,32 @@ mt7531_setup(struct dsa_switch *ds)
 	return 0;
 }
 
+static void mt7530_mac_port_get_caps(struct dsa_switch *ds, int port,
+				     struct phylink_config *config)
+{
+	switch (port) {
+	case 0 ... 4: /* Internal phy */
+		__set_bit(PHY_INTERFACE_MODE_GMII,
+			  config->supported_interfaces);
+		break;
+
+	case 5: /* 2nd cpu port with phy of port 0 or 4 / external phy */
+		phy_interface_set_rgmii(config->supported_interfaces);
+		__set_bit(PHY_INTERFACE_MODE_MII,
+			  config->supported_interfaces);
+		__set_bit(PHY_INTERFACE_MODE_GMII,
+			  config->supported_interfaces);
+		break;
+
+	case 6: /* 1st cpu port */
+		__set_bit(PHY_INTERFACE_MODE_RGMII,
+			  config->supported_interfaces);
+		__set_bit(PHY_INTERFACE_MODE_TRGMII,
+			  config->supported_interfaces);
+		break;
+	}
+}
+
 static bool
 mt7530_phy_mode_supported(struct dsa_switch *ds, int port,
 			  const struct phylink_link_state *state)
@@ -2425,6 +2451,37 @@ static bool mt7531_is_rgmii_port(struct mt7530_priv *priv, u32 port)
 	return (port == 5) && (priv->p5_intf_sel != P5_INTF_SEL_GMAC5_SGMII);
 }
 
+static void mt7531_mac_port_get_caps(struct dsa_switch *ds, int port,
+				     struct phylink_config *config)
+{
+	struct mt7530_priv *priv = ds->priv;
+
+	switch (port) {
+	case 0 ... 4: /* Internal phy */
+		__set_bit(PHY_INTERFACE_MODE_GMII,
+			  config->supported_interfaces);
+		break;
+
+	case 5: /* 2nd cpu port supports either rgmii or sgmii/8023z */
+		if (mt7531_is_rgmii_port(priv, port)) {
+			phy_interface_set_rgmii(config->supported_interfaces);
+			break;
+		}
+		fallthrough;
+
+	case 6: /* 1st cpu port supports sgmii/8023z only */
+		__set_bit(PHY_INTERFACE_MODE_SGMII,
+			  config->supported_interfaces);
+		__set_bit(PHY_INTERFACE_MODE_1000BASEX,
+			  config->supported_interfaces);
+		__set_bit(PHY_INTERFACE_MODE_2500BASEX,
+			  config->supported_interfaces);
+
+		config->mac_capabilities |= MAC_2500FD;
+		break;
+	}
+}
+
 static bool
 mt7531_phy_mode_supported(struct dsa_switch *ds, int port,
 			  const struct phylink_link_state *state)
@@ -2904,6 +2961,18 @@ mt7531_cpu_port_config(struct dsa_switch *ds, int port)
 	return 0;
 }
 
+static void mt753x_phylink_get_caps(struct dsa_switch *ds, int port,
+				    struct phylink_config *config)
+{
+	struct mt7530_priv *priv = ds->priv;
+
+	/* This switch only supports full-duplex at 1Gbps */
+	config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
+				   MAC_10 | MAC_100 | MAC_1000FD;
+
+	priv->info->mac_port_get_caps(ds, port, config);
+}
+
 static void
 mt7530_mac_port_validate(struct dsa_switch *ds, int port,
 			 unsigned long *supported)
@@ -3139,6 +3208,7 @@ static const struct dsa_switch_ops mt7530_switch_ops = {
 	.port_vlan_del		= mt7530_port_vlan_del,
 	.port_mirror_add	= mt753x_port_mirror_add,
 	.port_mirror_del	= mt753x_port_mirror_del,
+	.phylink_get_caps	= mt753x_phylink_get_caps,
 	.phylink_validate	= mt753x_phylink_validate,
 	.phylink_mac_link_state	= mt753x_phylink_mac_link_state,
 	.phylink_mac_config	= mt753x_phylink_mac_config,
@@ -3156,6 +3226,7 @@ static const struct mt753x_info mt753x_table[] = {
 		.phy_read = mt7530_phy_read,
 		.phy_write = mt7530_phy_write,
 		.pad_setup = mt7530_pad_clk_setup,
+		.mac_port_get_caps = mt7530_mac_port_get_caps,
 		.phy_mode_supported = mt7530_phy_mode_supported,
 		.mac_port_validate = mt7530_mac_port_validate,
 		.mac_port_get_state = mt7530_phylink_mac_link_state,
@@ -3167,6 +3238,7 @@ static const struct mt753x_info mt753x_table[] = {
 		.phy_read = mt7530_phy_read,
 		.phy_write = mt7530_phy_write,
 		.pad_setup = mt7530_pad_clk_setup,
+		.mac_port_get_caps = mt7530_mac_port_get_caps,
 		.phy_mode_supported = mt7530_phy_mode_supported,
 		.mac_port_validate = mt7530_mac_port_validate,
 		.mac_port_get_state = mt7530_phylink_mac_link_state,
@@ -3179,6 +3251,7 @@ static const struct mt753x_info mt753x_table[] = {
 		.phy_write = mt7531_ind_phy_write,
 		.pad_setup = mt7531_pad_setup,
 		.cpu_port_config = mt7531_cpu_port_config,
+		.mac_port_get_caps = mt7531_mac_port_get_caps,
 		.phy_mode_supported = mt7531_phy_mode_supported,
 		.mac_port_validate = mt7531_mac_port_validate,
 		.mac_port_get_state = mt7531_phylink_mac_link_state,
@@ -3241,6 +3314,7 @@ mt7530_probe(struct mdio_device *mdiodev)
 	 */
 	if (!priv->info->sw_setup || !priv->info->pad_setup ||
 	    !priv->info->phy_read || !priv->info->phy_write ||
+	    !priv->info->mac_port_get_caps ||
 	    !priv->info->phy_mode_supported ||
 	    !priv->info->mac_port_validate ||
 	    !priv->info->mac_port_get_state || !priv->info->mac_port_config)
diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
index 91508e2feef9..e285b68ba354 100644
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -769,6 +769,8 @@ struct mt753x_info {
 	int (*phy_write)(struct mt7530_priv *priv, int port, int regnum, u16 val);
 	int (*pad_setup)(struct dsa_switch *ds, phy_interface_t interface);
 	int (*cpu_port_config)(struct dsa_switch *ds, int port);
+	void (*mac_port_get_caps)(struct dsa_switch *ds, int port,
+				  struct phylink_config *config);
 	bool (*phy_mode_supported)(struct dsa_switch *ds, int port,
 				   const struct phylink_link_state *state);
 	void (*mac_port_validate)(struct dsa_switch *ds, int port,
-- 
2.30.2


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

WARNING: multiple messages have this Message-ID (diff)
From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
To: Landen Chao <Landen.Chao@mediatek.com>,
	DENG Qingfang <dqfext@gmail.com>,
	Sean Wang <sean.wang@mediatek.com>
Cc: Marek Beh__n <kabel@kernel.org>, Andrew Lunn <andrew@lunn.ch>,
	Vivien Didelot <vivien.didelot@gmail.com>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Vladimir Oltean <olteanv@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	netdev@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org
Subject: [PATCH net-next 2/9] net: dsa: mt7530: populate supported_interfaces and mac_capabilities
Date: Wed, 06 Apr 2022 11:48:42 +0100	[thread overview]
Message-ID: <E1nc3DO-004hpp-23@rmk-PC.armlinux.org.uk> (raw)
In-Reply-To: <Yk1iHCy4fqvxsvu0@shell.armlinux.org.uk>

Populate the supported interfaces and MAC capabilities for mt7530,
mt7531 and mt7621 DSA switches. Filling this in will enable phylink
to pre-check the PHY interface mode against the the supported
interfaces bitmap prior to calling the validate function, and will
eventually allow us to convert to using the generic validation.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 drivers/net/dsa/mt7530.c | 74 ++++++++++++++++++++++++++++++++++++++++
 drivers/net/dsa/mt7530.h |  2 ++
 2 files changed, 76 insertions(+)

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 20cadee13361..954d738c75f2 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -2389,6 +2389,32 @@ mt7531_setup(struct dsa_switch *ds)
 	return 0;
 }
 
+static void mt7530_mac_port_get_caps(struct dsa_switch *ds, int port,
+				     struct phylink_config *config)
+{
+	switch (port) {
+	case 0 ... 4: /* Internal phy */
+		__set_bit(PHY_INTERFACE_MODE_GMII,
+			  config->supported_interfaces);
+		break;
+
+	case 5: /* 2nd cpu port with phy of port 0 or 4 / external phy */
+		phy_interface_set_rgmii(config->supported_interfaces);
+		__set_bit(PHY_INTERFACE_MODE_MII,
+			  config->supported_interfaces);
+		__set_bit(PHY_INTERFACE_MODE_GMII,
+			  config->supported_interfaces);
+		break;
+
+	case 6: /* 1st cpu port */
+		__set_bit(PHY_INTERFACE_MODE_RGMII,
+			  config->supported_interfaces);
+		__set_bit(PHY_INTERFACE_MODE_TRGMII,
+			  config->supported_interfaces);
+		break;
+	}
+}
+
 static bool
 mt7530_phy_mode_supported(struct dsa_switch *ds, int port,
 			  const struct phylink_link_state *state)
@@ -2425,6 +2451,37 @@ static bool mt7531_is_rgmii_port(struct mt7530_priv *priv, u32 port)
 	return (port == 5) && (priv->p5_intf_sel != P5_INTF_SEL_GMAC5_SGMII);
 }
 
+static void mt7531_mac_port_get_caps(struct dsa_switch *ds, int port,
+				     struct phylink_config *config)
+{
+	struct mt7530_priv *priv = ds->priv;
+
+	switch (port) {
+	case 0 ... 4: /* Internal phy */
+		__set_bit(PHY_INTERFACE_MODE_GMII,
+			  config->supported_interfaces);
+		break;
+
+	case 5: /* 2nd cpu port supports either rgmii or sgmii/8023z */
+		if (mt7531_is_rgmii_port(priv, port)) {
+			phy_interface_set_rgmii(config->supported_interfaces);
+			break;
+		}
+		fallthrough;
+
+	case 6: /* 1st cpu port supports sgmii/8023z only */
+		__set_bit(PHY_INTERFACE_MODE_SGMII,
+			  config->supported_interfaces);
+		__set_bit(PHY_INTERFACE_MODE_1000BASEX,
+			  config->supported_interfaces);
+		__set_bit(PHY_INTERFACE_MODE_2500BASEX,
+			  config->supported_interfaces);
+
+		config->mac_capabilities |= MAC_2500FD;
+		break;
+	}
+}
+
 static bool
 mt7531_phy_mode_supported(struct dsa_switch *ds, int port,
 			  const struct phylink_link_state *state)
@@ -2904,6 +2961,18 @@ mt7531_cpu_port_config(struct dsa_switch *ds, int port)
 	return 0;
 }
 
+static void mt753x_phylink_get_caps(struct dsa_switch *ds, int port,
+				    struct phylink_config *config)
+{
+	struct mt7530_priv *priv = ds->priv;
+
+	/* This switch only supports full-duplex at 1Gbps */
+	config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
+				   MAC_10 | MAC_100 | MAC_1000FD;
+
+	priv->info->mac_port_get_caps(ds, port, config);
+}
+
 static void
 mt7530_mac_port_validate(struct dsa_switch *ds, int port,
 			 unsigned long *supported)
@@ -3139,6 +3208,7 @@ static const struct dsa_switch_ops mt7530_switch_ops = {
 	.port_vlan_del		= mt7530_port_vlan_del,
 	.port_mirror_add	= mt753x_port_mirror_add,
 	.port_mirror_del	= mt753x_port_mirror_del,
+	.phylink_get_caps	= mt753x_phylink_get_caps,
 	.phylink_validate	= mt753x_phylink_validate,
 	.phylink_mac_link_state	= mt753x_phylink_mac_link_state,
 	.phylink_mac_config	= mt753x_phylink_mac_config,
@@ -3156,6 +3226,7 @@ static const struct mt753x_info mt753x_table[] = {
 		.phy_read = mt7530_phy_read,
 		.phy_write = mt7530_phy_write,
 		.pad_setup = mt7530_pad_clk_setup,
+		.mac_port_get_caps = mt7530_mac_port_get_caps,
 		.phy_mode_supported = mt7530_phy_mode_supported,
 		.mac_port_validate = mt7530_mac_port_validate,
 		.mac_port_get_state = mt7530_phylink_mac_link_state,
@@ -3167,6 +3238,7 @@ static const struct mt753x_info mt753x_table[] = {
 		.phy_read = mt7530_phy_read,
 		.phy_write = mt7530_phy_write,
 		.pad_setup = mt7530_pad_clk_setup,
+		.mac_port_get_caps = mt7530_mac_port_get_caps,
 		.phy_mode_supported = mt7530_phy_mode_supported,
 		.mac_port_validate = mt7530_mac_port_validate,
 		.mac_port_get_state = mt7530_phylink_mac_link_state,
@@ -3179,6 +3251,7 @@ static const struct mt753x_info mt753x_table[] = {
 		.phy_write = mt7531_ind_phy_write,
 		.pad_setup = mt7531_pad_setup,
 		.cpu_port_config = mt7531_cpu_port_config,
+		.mac_port_get_caps = mt7531_mac_port_get_caps,
 		.phy_mode_supported = mt7531_phy_mode_supported,
 		.mac_port_validate = mt7531_mac_port_validate,
 		.mac_port_get_state = mt7531_phylink_mac_link_state,
@@ -3241,6 +3314,7 @@ mt7530_probe(struct mdio_device *mdiodev)
 	 */
 	if (!priv->info->sw_setup || !priv->info->pad_setup ||
 	    !priv->info->phy_read || !priv->info->phy_write ||
+	    !priv->info->mac_port_get_caps ||
 	    !priv->info->phy_mode_supported ||
 	    !priv->info->mac_port_validate ||
 	    !priv->info->mac_port_get_state || !priv->info->mac_port_config)
diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
index 91508e2feef9..e285b68ba354 100644
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -769,6 +769,8 @@ struct mt753x_info {
 	int (*phy_write)(struct mt7530_priv *priv, int port, int regnum, u16 val);
 	int (*pad_setup)(struct dsa_switch *ds, phy_interface_t interface);
 	int (*cpu_port_config)(struct dsa_switch *ds, int port);
+	void (*mac_port_get_caps)(struct dsa_switch *ds, int port,
+				  struct phylink_config *config);
 	bool (*phy_mode_supported)(struct dsa_switch *ds, int port,
 				   const struct phylink_link_state *state);
 	void (*mac_port_validate)(struct dsa_switch *ds, int port,
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
To: Landen Chao <Landen.Chao@mediatek.com>,
	DENG Qingfang <dqfext@gmail.com>,
	Sean Wang <sean.wang@mediatek.com>
Cc: Marek Beh__n <kabel@kernel.org>, Andrew Lunn <andrew@lunn.ch>,
	Vivien Didelot <vivien.didelot@gmail.com>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Vladimir Oltean <olteanv@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	netdev@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org
Subject: [PATCH net-next 2/9] net: dsa: mt7530: populate supported_interfaces and mac_capabilities
Date: Wed, 06 Apr 2022 11:48:42 +0100	[thread overview]
Message-ID: <E1nc3DO-004hpp-23@rmk-PC.armlinux.org.uk> (raw)
In-Reply-To: <Yk1iHCy4fqvxsvu0@shell.armlinux.org.uk>

Populate the supported interfaces and MAC capabilities for mt7530,
mt7531 and mt7621 DSA switches. Filling this in will enable phylink
to pre-check the PHY interface mode against the the supported
interfaces bitmap prior to calling the validate function, and will
eventually allow us to convert to using the generic validation.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 drivers/net/dsa/mt7530.c | 74 ++++++++++++++++++++++++++++++++++++++++
 drivers/net/dsa/mt7530.h |  2 ++
 2 files changed, 76 insertions(+)

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 20cadee13361..954d738c75f2 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -2389,6 +2389,32 @@ mt7531_setup(struct dsa_switch *ds)
 	return 0;
 }
 
+static void mt7530_mac_port_get_caps(struct dsa_switch *ds, int port,
+				     struct phylink_config *config)
+{
+	switch (port) {
+	case 0 ... 4: /* Internal phy */
+		__set_bit(PHY_INTERFACE_MODE_GMII,
+			  config->supported_interfaces);
+		break;
+
+	case 5: /* 2nd cpu port with phy of port 0 or 4 / external phy */
+		phy_interface_set_rgmii(config->supported_interfaces);
+		__set_bit(PHY_INTERFACE_MODE_MII,
+			  config->supported_interfaces);
+		__set_bit(PHY_INTERFACE_MODE_GMII,
+			  config->supported_interfaces);
+		break;
+
+	case 6: /* 1st cpu port */
+		__set_bit(PHY_INTERFACE_MODE_RGMII,
+			  config->supported_interfaces);
+		__set_bit(PHY_INTERFACE_MODE_TRGMII,
+			  config->supported_interfaces);
+		break;
+	}
+}
+
 static bool
 mt7530_phy_mode_supported(struct dsa_switch *ds, int port,
 			  const struct phylink_link_state *state)
@@ -2425,6 +2451,37 @@ static bool mt7531_is_rgmii_port(struct mt7530_priv *priv, u32 port)
 	return (port == 5) && (priv->p5_intf_sel != P5_INTF_SEL_GMAC5_SGMII);
 }
 
+static void mt7531_mac_port_get_caps(struct dsa_switch *ds, int port,
+				     struct phylink_config *config)
+{
+	struct mt7530_priv *priv = ds->priv;
+
+	switch (port) {
+	case 0 ... 4: /* Internal phy */
+		__set_bit(PHY_INTERFACE_MODE_GMII,
+			  config->supported_interfaces);
+		break;
+
+	case 5: /* 2nd cpu port supports either rgmii or sgmii/8023z */
+		if (mt7531_is_rgmii_port(priv, port)) {
+			phy_interface_set_rgmii(config->supported_interfaces);
+			break;
+		}
+		fallthrough;
+
+	case 6: /* 1st cpu port supports sgmii/8023z only */
+		__set_bit(PHY_INTERFACE_MODE_SGMII,
+			  config->supported_interfaces);
+		__set_bit(PHY_INTERFACE_MODE_1000BASEX,
+			  config->supported_interfaces);
+		__set_bit(PHY_INTERFACE_MODE_2500BASEX,
+			  config->supported_interfaces);
+
+		config->mac_capabilities |= MAC_2500FD;
+		break;
+	}
+}
+
 static bool
 mt7531_phy_mode_supported(struct dsa_switch *ds, int port,
 			  const struct phylink_link_state *state)
@@ -2904,6 +2961,18 @@ mt7531_cpu_port_config(struct dsa_switch *ds, int port)
 	return 0;
 }
 
+static void mt753x_phylink_get_caps(struct dsa_switch *ds, int port,
+				    struct phylink_config *config)
+{
+	struct mt7530_priv *priv = ds->priv;
+
+	/* This switch only supports full-duplex at 1Gbps */
+	config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
+				   MAC_10 | MAC_100 | MAC_1000FD;
+
+	priv->info->mac_port_get_caps(ds, port, config);
+}
+
 static void
 mt7530_mac_port_validate(struct dsa_switch *ds, int port,
 			 unsigned long *supported)
@@ -3139,6 +3208,7 @@ static const struct dsa_switch_ops mt7530_switch_ops = {
 	.port_vlan_del		= mt7530_port_vlan_del,
 	.port_mirror_add	= mt753x_port_mirror_add,
 	.port_mirror_del	= mt753x_port_mirror_del,
+	.phylink_get_caps	= mt753x_phylink_get_caps,
 	.phylink_validate	= mt753x_phylink_validate,
 	.phylink_mac_link_state	= mt753x_phylink_mac_link_state,
 	.phylink_mac_config	= mt753x_phylink_mac_config,
@@ -3156,6 +3226,7 @@ static const struct mt753x_info mt753x_table[] = {
 		.phy_read = mt7530_phy_read,
 		.phy_write = mt7530_phy_write,
 		.pad_setup = mt7530_pad_clk_setup,
+		.mac_port_get_caps = mt7530_mac_port_get_caps,
 		.phy_mode_supported = mt7530_phy_mode_supported,
 		.mac_port_validate = mt7530_mac_port_validate,
 		.mac_port_get_state = mt7530_phylink_mac_link_state,
@@ -3167,6 +3238,7 @@ static const struct mt753x_info mt753x_table[] = {
 		.phy_read = mt7530_phy_read,
 		.phy_write = mt7530_phy_write,
 		.pad_setup = mt7530_pad_clk_setup,
+		.mac_port_get_caps = mt7530_mac_port_get_caps,
 		.phy_mode_supported = mt7530_phy_mode_supported,
 		.mac_port_validate = mt7530_mac_port_validate,
 		.mac_port_get_state = mt7530_phylink_mac_link_state,
@@ -3179,6 +3251,7 @@ static const struct mt753x_info mt753x_table[] = {
 		.phy_write = mt7531_ind_phy_write,
 		.pad_setup = mt7531_pad_setup,
 		.cpu_port_config = mt7531_cpu_port_config,
+		.mac_port_get_caps = mt7531_mac_port_get_caps,
 		.phy_mode_supported = mt7531_phy_mode_supported,
 		.mac_port_validate = mt7531_mac_port_validate,
 		.mac_port_get_state = mt7531_phylink_mac_link_state,
@@ -3241,6 +3314,7 @@ mt7530_probe(struct mdio_device *mdiodev)
 	 */
 	if (!priv->info->sw_setup || !priv->info->pad_setup ||
 	    !priv->info->phy_read || !priv->info->phy_write ||
+	    !priv->info->mac_port_get_caps ||
 	    !priv->info->phy_mode_supported ||
 	    !priv->info->mac_port_validate ||
 	    !priv->info->mac_port_get_state || !priv->info->mac_port_config)
diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
index 91508e2feef9..e285b68ba354 100644
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -769,6 +769,8 @@ struct mt753x_info {
 	int (*phy_write)(struct mt7530_priv *priv, int port, int regnum, u16 val);
 	int (*pad_setup)(struct dsa_switch *ds, phy_interface_t interface);
 	int (*cpu_port_config)(struct dsa_switch *ds, int port);
+	void (*mac_port_get_caps)(struct dsa_switch *ds, int port,
+				  struct phylink_config *config);
 	bool (*phy_mode_supported)(struct dsa_switch *ds, int port,
 				   const struct phylink_link_state *state);
 	void (*mac_port_validate)(struct dsa_switch *ds, int port,
-- 
2.30.2


  parent reply	other threads:[~2022-04-06 10:49 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-06  9:49 [PATCH net-next 0/9] net: dsa: mt7530: updates for phylink changes Russell King (Oracle)
2022-04-06  9:49 ` Russell King (Oracle)
2022-04-06  9:49 ` Russell King (Oracle)
2022-04-06 10:48 ` [PATCH net-next 1/9] net: dsa: mt7530: 1G can also support 1000BASE-X link mode Russell King (Oracle)
2022-04-06 10:48   ` Russell King (Oracle)
2022-04-06 10:48   ` Russell King (Oracle)
2022-04-06 10:48 ` Russell King (Oracle) [this message]
2022-04-06 10:48   ` [PATCH net-next 2/9] net: dsa: mt7530: populate supported_interfaces and mac_capabilities Russell King (Oracle)
2022-04-06 10:48   ` Russell King (Oracle)
2022-04-06 10:48 ` [PATCH net-next 3/9] net: dsa: mt7530: remove interface checks Russell King (Oracle)
2022-04-06 10:48   ` Russell King (Oracle)
2022-04-06 10:48   ` Russell King (Oracle)
2022-04-06 10:48 ` [PATCH net-next 4/9] net: dsa: mt7530: drop use of phylink_helper_basex_speed() Russell King (Oracle)
2022-04-06 10:48   ` Russell King (Oracle)
2022-04-06 10:48   ` Russell King (Oracle)
2022-04-06 10:48 ` [PATCH net-next 5/9] net: dsa: mt7530: only indicate linkmodes that can be supported Russell King (Oracle)
2022-04-06 10:48   ` Russell King (Oracle)
2022-04-06 10:48   ` Russell King (Oracle)
2022-04-06 18:52   ` Jakub Kicinski
2022-04-06 18:52     ` Jakub Kicinski
2022-04-06 18:52     ` Jakub Kicinski
2022-04-06 20:34     ` Marek Behún
2022-04-06 20:34       ` Marek Behún
2022-04-06 20:34       ` Marek Behún
2022-04-07 14:47       ` Russell King (Oracle)
2022-04-07 14:47         ` Russell King (Oracle)
2022-04-07 14:47         ` Russell King (Oracle)
2022-04-06 10:49 ` [PATCH net-next 6/9] net: dsa: mt7530: switch to use phylink_get_linkmodes() Russell King (Oracle)
2022-04-06 10:49   ` Russell King (Oracle)
2022-04-06 10:49   ` Russell King (Oracle)
2022-04-06 10:49 ` [PATCH net-next 7/9] net: dsa: mt7530: partially convert to phylink_pcs Russell King (Oracle)
2022-04-06 10:49   ` Russell King (Oracle)
2022-04-06 10:49   ` Russell King (Oracle)
2022-04-06 10:49 ` [PATCH net-next 8/9] net: dsa: mt7530: move autoneg handling to PCS validation Russell King (Oracle)
2022-04-06 10:49   ` Russell King (Oracle)
2022-04-06 10:49   ` Russell King (Oracle)
2022-04-06 10:49 ` [PATCH net-next 9/9] net: dsa: mt7530: mark as non-legacy Russell King (Oracle)
2022-04-06 10:49   ` Russell King (Oracle)
2022-04-06 10:49   ` Russell King (Oracle)
2022-04-06 22:35 ` [PATCH net-next 0/9] net: dsa: mt7530: updates for phylink changes Marek Behún
2022-04-06 22:35   ` Marek Behún
2022-04-06 22:35   ` Marek Behún

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=E1nc3DO-004hpp-23@rmk-PC.armlinux.org.uk \
    --to=rmk+kernel@armlinux.org.uk \
    --cc=Landen.Chao@mediatek.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=dqfext@gmail.com \
    --cc=f.fainelli@gmail.com \
    --cc=kabel@kernel.org \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=matthias.bgg@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=olteanv@gmail.com \
    --cc=pabeni@redhat.com \
    --cc=sean.wang@mediatek.com \
    --cc=vivien.didelot@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.