* [PATCH 1/1] OMAP: DSS2: Add NEC NL8048HL11-01B display panel @ 2010-10-14 11:25 Samreen 2010-10-20 12:27 ` Hiremath, Vaibhav 0 siblings, 1 reply; 3+ messages in thread From: Samreen @ 2010-10-14 11:25 UTC (permalink / raw) To: linux-omap Cc: Erik Gilling, Subbu Venkatesh, Mukund Mittal, Rajkumar N, Samreen From: Erik Gilling <konkers@android.com> NEC WVGA LCD NL8048HL11-01B panel support has been added. This panel is being used in zoom2/zoom3/3630 sdp boards. Signed-off-by: Mukund Mittal <mmittal@ti.com> Signed-off-by: Rajkumar N <rajkumar.nagarajan@ti.com> Signed-off-by: Samreen <samreen@ti.com> CC: Subbu Venkatesh <subramani.venkatesh@windriver.com> CC: Erik Gilling <konkers@android.com> --- This panel driver has orginated from panel-zoom2 from the L25.x releases.Refer Commit: http://git.omapzoom.org/?p=kernel/omap.git;a=commit;h=75fc121865125d9e3ca3b36f1f19f86b394e1f6b drivers/video/omap2/displays/Kconfig | 7 + drivers/video/omap2/displays/Makefile | 1 + .../omap2/displays/panel-nec-nl8048hl11-01b.c | 381 ++++++++++++++++++++ 3 files changed, 389 insertions(+), 0 deletions(-) create mode 100644 drivers/video/omap2/displays/panel-nec-nl8048hl11-01b.c diff --git a/drivers/video/omap2/displays/Kconfig b/drivers/video/omap2/displays/Kconfig index 12327bb..f8152cf 100644 --- a/drivers/video/omap2/displays/Kconfig +++ b/drivers/video/omap2/displays/Kconfig @@ -20,6 +20,13 @@ config PANEL_SHARP_LQ043T1DG01 help LCD Panel used in TI's OMAP3517 EVM boards +config PANEL_NEC_NL8048HL11_01B + tristate "NEC NL8048HL11-01B Panel" + depends on OMAP2_DSS + help + This NEC NL8048HL11-01B panel is TFT LCD + used in the Zoom2/3/3630 sdp boards. + config PANEL_TAAL tristate "Taal DSI Panel" depends on OMAP2_DSS_DSI diff --git a/drivers/video/omap2/displays/Makefile b/drivers/video/omap2/displays/Makefile index aa38609..8ece91c 100644 --- a/drivers/video/omap2/displays/Makefile +++ b/drivers/video/omap2/displays/Makefile @@ -1,6 +1,7 @@ obj-$(CONFIG_PANEL_GENERIC) += panel-generic.o obj-$(CONFIG_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o obj-$(CONFIG_PANEL_SHARP_LQ043T1DG01) += panel-sharp-lq043t1dg01.o +obj-$(CONFIG_PANEL_NEC_NL8048HL11_01B) += panel-nec-nl8048hl11-01b.o obj-$(CONFIG_PANEL_TAAL) += panel-taal.o obj-$(CONFIG_PANEL_TOPPOLY_TDO35S) += panel-toppoly-tdo35s.o diff --git a/drivers/video/omap2/displays/panel-nec-nl8048hl11-01b.c b/drivers/video/omap2/displays/panel-nec-nl8048hl11-01b.c new file mode 100644 index 0000000..cdc0d8f --- /dev/null +++ b/drivers/video/omap2/displays/panel-nec-nl8048hl11-01b.c @@ -0,0 +1,381 @@ +/* + * Support for NEC-nl8048hl11-01b panel driver + * + * Copyright (C) 2010 Texas Instruments Inc. + * Author: Erik Gilling <konkers@android.com> + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/spi/spi.h> +#include <plat/display.h> +#include <linux/backlight.h> +#include <linux/fb.h> + +#define LCD_XRES 800 +#define LCD_YRES 480 +/* + * NEC PIX Clock Ratings + * MIN:21.8MHz TYP:23.8MHz MAX:25.7MHz + */ +#define LCD_PIXEL_CLOCK 23800 + +struct nec_8048_data { + struct backlight_device *bl; +}; + +/* + * NEC NL8048HL11-01B Manual + * defines HFB, HSW, HBP, VFP, VSW, VBP as shown below + */ + +static struct omap_video_timings nec_8048_panel_timings = { + /* 800 x 480 @ 60 Hz Reduced blanking VESA CVT 0.31M3-R */ + .x_res = LCD_XRES, + .y_res = LCD_YRES, + .pixel_clock = LCD_PIXEL_CLOCK, + .hfp = 6, + .hsw = 1, + .hbp = 4, + .vfp = 3, + .vsw = 1, + .vbp = 4, +}; + +static int nec_8048_bl_update_status(struct backlight_device *bl) +{ + struct omap_dss_device *dssdev = dev_get_drvdata(&bl->dev); + int level; + + if (!dssdev->set_backlight) + return -EINVAL; + + if (bl->props.fb_blank == FB_BLANK_UNBLANK && + bl->props.power == FB_BLANK_UNBLANK) + level = bl->props.brightness; + else + level = 0; + + return dssdev->set_backlight(dssdev, level); +} + +static int nec_8048_bl_get_brightness(struct backlight_device *bl) +{ + if (bl->props.fb_blank == FB_BLANK_UNBLANK && + bl->props.power == FB_BLANK_UNBLANK) + return bl->props.brightness; + + return 0; +} + +static const struct backlight_ops nec_8048_bl_ops = { + .get_brightness = nec_8048_bl_get_brightness, + .update_status = nec_8048_bl_update_status, +}; + +static int nec_8048_panel_probe(struct omap_dss_device *dssdev) +{ + struct backlight_device *bl; + struct nec_8048_data *necd; + struct backlight_properties props; + int r; + + dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS | + OMAP_DSS_LCD_IHS | OMAP_DSS_LCD_RF | + OMAP_DSS_LCD_ONOFF; + dssdev->panel.timings = nec_8048_panel_timings; + + necd = kzalloc(sizeof(*necd), GFP_KERNEL); + if (!necd) + return -ENOMEM; + + dev_set_drvdata(&dssdev->dev, necd); + + memset(&props, 0, sizeof(struct backlight_properties)); + props.max_brightness = 255; + + bl = backlight_device_register("nec-8048", &dssdev->dev, dssdev, + &nec_8048_bl_ops, &props); + if (IS_ERR(bl)) { + r = PTR_ERR(bl); + kfree(necd); + return r; + } + necd->bl = bl; + + bl->props.fb_blank = FB_BLANK_UNBLANK; + bl->props.power = FB_BLANK_UNBLANK; + bl->props.max_brightness = dssdev->max_backlight_level; + bl->props.brightness = 0; + + r = nec_8048_bl_update_status(bl); + if (r < 0) + dev_err(&dssdev->dev, "failed to set lcd brightness\n"); + + return 0; +} + +static void nec_8048_panel_remove(struct omap_dss_device *dssdev) +{ + struct nec_8048_data *necd = dev_get_drvdata(&dssdev->dev); + struct backlight_device *bl = necd->bl; + + bl->props.power = FB_BLANK_POWERDOWN; + nec_8048_bl_update_status(bl); + backlight_device_unregister(bl); + + kfree(necd); +} + +static int nec_8048_panel_enable(struct omap_dss_device *dssdev) +{ + int r = 0; + struct nec_8048_data *necd = dev_get_drvdata(&dssdev->dev); + struct backlight_device *bl = necd->bl; + + if (dssdev->platform_enable) { + r = dssdev->platform_enable(dssdev); + if (r) + return r; + } + + bl->props.brightness = dssdev->max_backlight_level; + r = nec_8048_bl_update_status(bl); + if (r < 0) + dev_err(&dssdev->dev, "failed to set lcd brightness\n"); + + omapdss_dpi_display_enable(dssdev); + + return 0; +} + +static void nec_8048_panel_disable(struct omap_dss_device *dssdev) +{ + struct nec_8048_data *necd = dev_get_drvdata(&dssdev->dev); + struct backlight_device *bl = necd->bl; + + omapdss_dpi_display_disable(dssdev); + + bl->props.brightness = 0; + nec_8048_bl_update_status(bl); + + if (dssdev->platform_disable) + dssdev->platform_disable(dssdev); +} + +static int nec_8048_panel_suspend(struct omap_dss_device *dssdev) +{ + nec_8048_panel_disable(dssdev); + return 0; +} + +static int nec_8048_panel_resume(struct omap_dss_device *dssdev) +{ + return nec_8048_panel_enable(dssdev); +} + +static int nec_8048_recommended_bpp(struct omap_dss_device *dssdev) +{ + return 16; +} + +static struct omap_dss_driver nec_8048_driver = { + .probe = nec_8048_panel_probe, + .remove = nec_8048_panel_remove, + .enable = nec_8048_panel_enable, + .disable = nec_8048_panel_disable, + .suspend = nec_8048_panel_suspend, + .resume = nec_8048_panel_resume, + .get_recommended_bpp = nec_8048_recommended_bpp, + + .driver = { + .name = "NEC_8048_panel", + .owner = THIS_MODULE, + }, +}; + +static int spi_send(struct spi_device *spi, unsigned char reg_addr, + unsigned char reg_data) +{ + int ret = 0; + unsigned int cmd = 0, data = 0; + + cmd = 0x0000 | reg_addr; /* register address write */ + data = 0x0100 | reg_data ; /* register data write */ + data = (cmd << 16) | data; + + ret = spi_write(spi, (unsigned char *)&data, 4); + if (ret) { + pr_err("error in spi_write %x\n", data); + return ret; + } + + return 0; +} + + +static int init_nec_8048_wvga_lcd(struct spi_device *spi) +{ + /* Initialization Sequence */ + /* spi_send(spi, REG, VAL) */ + spi_send(spi, 3, 0x01); + spi_send(spi, 0, 0x00); + spi_send(spi, 1, 0x01); /* R1 = 0x01 (normal), 0x03 (reversed) */ + spi_send(spi, 4, 0x00); + spi_send(spi, 5, 0x14); + spi_send(spi, 6, 0x24); + spi_send(spi, 16, 0xD7); + spi_send(spi, 17, 0x00); + spi_send(spi, 18, 0x00); + spi_send(spi, 19, 0x55); + spi_send(spi, 20, 0x01); + spi_send(spi, 21, 0x70); + spi_send(spi, 22, 0x1E); + spi_send(spi, 23, 0x25); + spi_send(spi, 24, 0x25); + spi_send(spi, 25, 0x02); + spi_send(spi, 26, 0x02); + spi_send(spi, 27, 0xA0); + spi_send(spi, 32, 0x2F); + spi_send(spi, 33, 0x0F); + spi_send(spi, 34, 0x0F); + spi_send(spi, 35, 0x0F); + spi_send(spi, 36, 0x0F); + spi_send(spi, 37, 0x0F); + spi_send(spi, 38, 0x0F); + spi_send(spi, 39, 0x00); + spi_send(spi, 40, 0x02); + spi_send(spi, 41, 0x02); + spi_send(spi, 42, 0x02); + spi_send(spi, 43, 0x0F); + spi_send(spi, 44, 0x0F); + spi_send(spi, 45, 0x0F); + spi_send(spi, 46, 0x0F); + spi_send(spi, 47, 0x0F); + spi_send(spi, 48, 0x0F); + spi_send(spi, 49, 0x0F); + spi_send(spi, 50, 0x00); + spi_send(spi, 51, 0x02); + spi_send(spi, 52, 0x02); + spi_send(spi, 53, 0x02); + spi_send(spi, 80, 0x0C); + spi_send(spi, 83, 0x42); + spi_send(spi, 84, 0x42); + spi_send(spi, 85, 0x41); + spi_send(spi, 86, 0x14); + spi_send(spi, 89, 0x88); + spi_send(spi, 90, 0x01); + spi_send(spi, 91, 0x00); + spi_send(spi, 92, 0x02); + spi_send(spi, 93, 0x0C); + spi_send(spi, 94, 0x1C); + spi_send(spi, 95, 0x27); + spi_send(spi, 98, 0x49); + spi_send(spi, 99, 0x27); + spi_send(spi, 102, 0x76); + spi_send(spi, 103, 0x27); + spi_send(spi, 112, 0x01); + spi_send(spi, 113, 0x0E); + spi_send(spi, 114, 0x02); + spi_send(spi, 115, 0x0C); + spi_send(spi, 118, 0x0C); + spi_send(spi, 121, 0x30); /* R121 = 0x30 (normal), 0x10 (reversed) */ + spi_send(spi, 130, 0x00); + spi_send(spi, 131, 0x00); + spi_send(spi, 132, 0xFC); + spi_send(spi, 134, 0x00); + spi_send(spi, 136, 0x00); + spi_send(spi, 138, 0x00); + spi_send(spi, 139, 0x00); + spi_send(spi, 140, 0x00); + spi_send(spi, 141, 0xFC); + spi_send(spi, 143, 0x00); + spi_send(spi, 145, 0x00); + spi_send(spi, 147, 0x00); + spi_send(spi, 148, 0x00); + spi_send(spi, 149, 0x00); + spi_send(spi, 150, 0xFC); + spi_send(spi, 152, 0x00); + spi_send(spi, 154, 0x00); + spi_send(spi, 156, 0x00); + spi_send(spi, 157, 0x00); + udelay(20); + spi_send(spi, 2, 0x00); + + return 0; +} + +static int nec_8048_spi_probe(struct spi_device *spi) +{ + spi->mode = SPI_MODE_0; + spi->bits_per_word = 32; + spi_setup(spi); + + init_nec_8048_wvga_lcd(spi); + + return omap_dss_register_driver(&nec_8048_driver); +} + +static int nec_8048_spi_remove(struct spi_device *spi) +{ + omap_dss_unregister_driver(&nec_8048_driver); + + return 0; +} + +static int nec_8048_spi_suspend(struct spi_device *spi, pm_message_t mesg) +{ + spi_send(spi, 2, 0x01); + mdelay(40); + + return 0; +} + +static int nec_8048_spi_resume(struct spi_device *spi) +{ + /* reinitialize the panel */ + spi_setup(spi); + spi_send(spi, 2, 0x00); + init_nec_8048_wvga_lcd(spi); + + return 0; +} + +static struct spi_driver nec_8048_spi_driver = { + .probe = nec_8048_spi_probe, + .remove = __devexit_p(nec_8048_spi_remove), + .suspend = nec_8048_spi_suspend, + .resume = nec_8048_spi_resume, + .driver = { + .name = "nec_8048_spi", + .bus = &spi_bus_type, + .owner = THIS_MODULE, + }, +}; + +static int __init nec_8048_lcd_init(void) +{ + return spi_register_driver(&nec_8048_spi_driver); +} + +static void __exit nec_8048_lcd_exit(void) +{ + return spi_unregister_driver(&nec_8048_spi_driver); +} + +module_init(nec_8048_lcd_init); +module_exit(nec_8048_lcd_exit); +MODULE_AUTHOR("Erik Gilling <konkers@android.com>"); +MODULE_DESCRIPTION("Nec Driver"); +MODULE_LICENSE("GPL"); -- 1.5.6.3 ^ permalink raw reply related [flat|nested] 3+ messages in thread
* RE: [PATCH 1/1] OMAP: DSS2: Add NEC NL8048HL11-01B display panel 2010-10-14 11:25 [PATCH 1/1] OMAP: DSS2: Add NEC NL8048HL11-01B display panel Samreen @ 2010-10-20 12:27 ` Hiremath, Vaibhav 2010-10-21 5:13 ` Nilofer, Samreen 0 siblings, 1 reply; 3+ messages in thread From: Hiremath, Vaibhav @ 2010-10-20 12:27 UTC (permalink / raw) To: Nilofer, Samreen, linux-omap Cc: Erik Gilling, Subbu Venkatesh, Mittal, Mukund, Rajkumar N > -----Original Message----- > From: linux-omap-owner@vger.kernel.org [mailto:linux-omap- > owner@vger.kernel.org] On Behalf Of Nilofer, Samreen > Sent: Thursday, October 14, 2010 4:55 PM > To: linux-omap@vger.kernel.org > Cc: Erik Gilling; Subbu Venkatesh; Mittal, Mukund; Rajkumar N; Nilofer, > Samreen > Subject: [PATCH 1/1] OMAP: DSS2: Add NEC NL8048HL11-01B display panel > > From: Erik Gilling <konkers@android.com> > > NEC WVGA LCD NL8048HL11-01B panel support has been added. > This panel is being used in zoom2/zoom3/3630 sdp boards. > > Signed-off-by: Mukund Mittal <mmittal@ti.com> > Signed-off-by: Rajkumar N <rajkumar.nagarajan@ti.com> > Signed-off-by: Samreen <samreen@ti.com> > CC: Subbu Venkatesh <subramani.venkatesh@windriver.com> > CC: Erik Gilling <konkers@android.com> > --- > This panel driver has orginated from panel-zoom2 from the L25.x > releases.Refer Commit: > > http://git.omapzoom.org/?p=kernel/omap.git;a=commit;h=75fc121865125d9e3ca3 > b36f1f19f86b394e1f6b > [Hiremath, Vaibhav] Does this cleanly apply on linux-omap/master branch or tomi's dss2 repo? You should not be generating patches from any local/custom repositories. > drivers/video/omap2/displays/Kconfig | 7 + > drivers/video/omap2/displays/Makefile | 1 + > .../omap2/displays/panel-nec-nl8048hl11-01b.c | 381 > ++++++++++++++++++++ > 3 files changed, 389 insertions(+), 0 deletions(-) > create mode 100644 drivers/video/omap2/displays/panel-nec-nl8048hl11- > 01b.c > > diff --git a/drivers/video/omap2/displays/Kconfig > b/drivers/video/omap2/displays/Kconfig > index 12327bb..f8152cf 100644 > --- a/drivers/video/omap2/displays/Kconfig > +++ b/drivers/video/omap2/displays/Kconfig > @@ -20,6 +20,13 @@ config PANEL_SHARP_LQ043T1DG01 > help > LCD Panel used in TI's OMAP3517 EVM boards > > +config PANEL_NEC_NL8048HL11_01B > + tristate "NEC NL8048HL11-01B Panel" > + depends on OMAP2_DSS > + help > + This NEC NL8048HL11-01B panel is TFT LCD > + used in the Zoom2/3/3630 sdp boards. > + > config PANEL_TAAL > tristate "Taal DSI Panel" > depends on OMAP2_DSS_DSI > diff --git a/drivers/video/omap2/displays/Makefile > b/drivers/video/omap2/displays/Makefile > index aa38609..8ece91c 100644 > --- a/drivers/video/omap2/displays/Makefile > +++ b/drivers/video/omap2/displays/Makefile > @@ -1,6 +1,7 @@ > obj-$(CONFIG_PANEL_GENERIC) += panel-generic.o > obj-$(CONFIG_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o > obj-$(CONFIG_PANEL_SHARP_LQ043T1DG01) += panel-sharp-lq043t1dg01.o > +obj-$(CONFIG_PANEL_NEC_NL8048HL11_01B) += panel-nec-nl8048hl11-01b.o > > obj-$(CONFIG_PANEL_TAAL) += panel-taal.o > obj-$(CONFIG_PANEL_TOPPOLY_TDO35S) += panel-toppoly-tdo35s.o > diff --git a/drivers/video/omap2/displays/panel-nec-nl8048hl11-01b.c > b/drivers/video/omap2/displays/panel-nec-nl8048hl11-01b.c > new file mode 100644 > index 0000000..cdc0d8f > --- /dev/null > +++ b/drivers/video/omap2/displays/panel-nec-nl8048hl11-01b.c > @@ -0,0 +1,381 @@ > +/* > + * Support for NEC-nl8048hl11-01b panel driver > + * > + * Copyright (C) 2010 Texas Instruments Inc. > + * Author: Erik Gilling <konkers@android.com> > + * This program is free software; you can redistribute it and/or modify > it > + * under the terms of the GNU General Public License version 2 as > published by > + * the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, but > WITHOUT > + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or > + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License > for > + * more details. > + * > + * You should have received a copy of the GNU General Public License > along with > + * this program. If not, see <http://www.gnu.org/licenses/>. > + */ > + > +#include <linux/module.h> > +#include <linux/delay.h> > +#include <linux/spi/spi.h> > +#include <plat/display.h> > +#include <linux/backlight.h> > +#include <linux/fb.h> > + [Hiremath, Vaibhav] It would be nice if you gather all linux/xxx.h file together, keep one line gap and add all plat/xxx.h file here. > +#define LCD_XRES 800 > +#define LCD_YRES 480 > +/* > + * NEC PIX Clock Ratings > + * MIN:21.8MHz TYP:23.8MHz MAX:25.7MHz > + */ > +#define LCD_PIXEL_CLOCK 23800 > + > +struct nec_8048_data { > + struct backlight_device *bl; > +}; > + > +/* > + * NEC NL8048HL11-01B Manual > + * defines HFB, HSW, HBP, VFP, VSW, VBP as shown below > + */ > + > +static struct omap_video_timings nec_8048_panel_timings = { > + /* 800 x 480 @ 60 Hz Reduced blanking VESA CVT 0.31M3-R */ > + .x_res = LCD_XRES, > + .y_res = LCD_YRES, > + .pixel_clock = LCD_PIXEL_CLOCK, > + .hfp = 6, > + .hsw = 1, > + .hbp = 4, > + .vfp = 3, > + .vsw = 1, > + .vbp = 4, > +}; > + > +static int nec_8048_bl_update_status(struct backlight_device *bl) > +{ > + struct omap_dss_device *dssdev = dev_get_drvdata(&bl->dev); > + int level; > + > + if (!dssdev->set_backlight) > + return -EINVAL; > + > + if (bl->props.fb_blank == FB_BLANK_UNBLANK && > + bl->props.power == FB_BLANK_UNBLANK) > + level = bl->props.brightness; > + else > + level = 0; > + > + return dssdev->set_backlight(dssdev, level); > +} > + > +static int nec_8048_bl_get_brightness(struct backlight_device *bl) > +{ > + if (bl->props.fb_blank == FB_BLANK_UNBLANK && > + bl->props.power == FB_BLANK_UNBLANK) > + return bl->props.brightness; > + > + return 0; > +} > + > +static const struct backlight_ops nec_8048_bl_ops = { > + .get_brightness = nec_8048_bl_get_brightness, > + .update_status = nec_8048_bl_update_status, > +}; > + > +static int nec_8048_panel_probe(struct omap_dss_device *dssdev) > +{ > + struct backlight_device *bl; > + struct nec_8048_data *necd; > + struct backlight_properties props; > + int r; > + > + dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS | > + OMAP_DSS_LCD_IHS | OMAP_DSS_LCD_RF | > + OMAP_DSS_LCD_ONOFF; > + dssdev->panel.timings = nec_8048_panel_timings; > + > + necd = kzalloc(sizeof(*necd), GFP_KERNEL); > + if (!necd) > + return -ENOMEM; > + > + dev_set_drvdata(&dssdev->dev, necd); > + > + memset(&props, 0, sizeof(struct backlight_properties)); > + props.max_brightness = 255; > + > + bl = backlight_device_register("nec-8048", &dssdev->dev, dssdev, > + &nec_8048_bl_ops, &props); > + if (IS_ERR(bl)) { > + r = PTR_ERR(bl); > + kfree(necd); > + return r; > + } > + necd->bl = bl; > + > + bl->props.fb_blank = FB_BLANK_UNBLANK; > + bl->props.power = FB_BLANK_UNBLANK; > + bl->props.max_brightness = dssdev->max_backlight_level; > + bl->props.brightness = 0; > + > + r = nec_8048_bl_update_status(bl); > + if (r < 0) > + dev_err(&dssdev->dev, "failed to set lcd brightness\n"); > + > + return 0; > +} > + > +static void nec_8048_panel_remove(struct omap_dss_device *dssdev) > +{ > + struct nec_8048_data *necd = dev_get_drvdata(&dssdev->dev); > + struct backlight_device *bl = necd->bl; > + > + bl->props.power = FB_BLANK_POWERDOWN; > + nec_8048_bl_update_status(bl); > + backlight_device_unregister(bl); > + > + kfree(necd); > +} > + > +static int nec_8048_panel_enable(struct omap_dss_device *dssdev) > +{ > + int r = 0; > + struct nec_8048_data *necd = dev_get_drvdata(&dssdev->dev); > + struct backlight_device *bl = necd->bl; > + > + if (dssdev->platform_enable) { > + r = dssdev->platform_enable(dssdev); > + if (r) > + return r; > + } > + > + bl->props.brightness = dssdev->max_backlight_level; [Hiremath, Vaibhav] Don't you think you should be using bl->props.brightness here, you are overriding user configuration? > + r = nec_8048_bl_update_status(bl); > + if (r < 0) > + dev_err(&dssdev->dev, "failed to set lcd brightness\n"); > + > + omapdss_dpi_display_enable(dssdev); > + [Hiremath, Vaibhav] Check return value here. > + return 0; > +} > + > +static void nec_8048_panel_disable(struct omap_dss_device *dssdev) > +{ > + struct nec_8048_data *necd = dev_get_drvdata(&dssdev->dev); > + struct backlight_device *bl = necd->bl; > + > + omapdss_dpi_display_disable(dssdev); > + > + bl->props.brightness = 0; > + nec_8048_bl_update_status(bl); > + > + if (dssdev->platform_disable) > + dssdev->platform_disable(dssdev); > +} > + > +static int nec_8048_panel_suspend(struct omap_dss_device *dssdev) > +{ > + nec_8048_panel_disable(dssdev); > + return 0; > +} > + > +static int nec_8048_panel_resume(struct omap_dss_device *dssdev) > +{ > + return nec_8048_panel_enable(dssdev); > +} > + > +static int nec_8048_recommended_bpp(struct omap_dss_device *dssdev) > +{ > + return 16; > +} > + > +static struct omap_dss_driver nec_8048_driver = { > + .probe = nec_8048_panel_probe, > + .remove = nec_8048_panel_remove, > + .enable = nec_8048_panel_enable, > + .disable = nec_8048_panel_disable, > + .suspend = nec_8048_panel_suspend, > + .resume = nec_8048_panel_resume, > + .get_recommended_bpp = nec_8048_recommended_bpp, > + > + .driver = { > + .name = "NEC_8048_panel", > + .owner = THIS_MODULE, > + }, > +}; > + > +static int spi_send(struct spi_device *spi, unsigned char reg_addr, > + unsigned char reg_data) > +{ > + int ret = 0; > + unsigned int cmd = 0, data = 0; > + > + cmd = 0x0000 | reg_addr; /* register address write */ > + data = 0x0100 | reg_data ; /* register data write */ > + data = (cmd << 16) | data; > + > + ret = spi_write(spi, (unsigned char *)&data, 4); > + if (ret) { > + pr_err("error in spi_write %x\n", data); > + return ret; > + } > + > + return 0; [Hiremath, Vaibhav] You can have some thing, ret = spi_write(spi, (unsigned char *)&data, 4); if (ret) pr_err("error in spi_write %x\n", data); return ret; Thanks, Vaibhav > +} > + > + > +static int init_nec_8048_wvga_lcd(struct spi_device *spi) > +{ > + /* Initialization Sequence */ > + /* spi_send(spi, REG, VAL) */ > + spi_send(spi, 3, 0x01); > + spi_send(spi, 0, 0x00); > + spi_send(spi, 1, 0x01); /* R1 = 0x01 (normal), 0x03 (reversed) */ > + spi_send(spi, 4, 0x00); > + spi_send(spi, 5, 0x14); > + spi_send(spi, 6, 0x24); > + spi_send(spi, 16, 0xD7); > + spi_send(spi, 17, 0x00); > + spi_send(spi, 18, 0x00); > + spi_send(spi, 19, 0x55); > + spi_send(spi, 20, 0x01); > + spi_send(spi, 21, 0x70); > + spi_send(spi, 22, 0x1E); > + spi_send(spi, 23, 0x25); > + spi_send(spi, 24, 0x25); > + spi_send(spi, 25, 0x02); > + spi_send(spi, 26, 0x02); > + spi_send(spi, 27, 0xA0); > + spi_send(spi, 32, 0x2F); > + spi_send(spi, 33, 0x0F); > + spi_send(spi, 34, 0x0F); > + spi_send(spi, 35, 0x0F); > + spi_send(spi, 36, 0x0F); > + spi_send(spi, 37, 0x0F); > + spi_send(spi, 38, 0x0F); > + spi_send(spi, 39, 0x00); > + spi_send(spi, 40, 0x02); > + spi_send(spi, 41, 0x02); > + spi_send(spi, 42, 0x02); > + spi_send(spi, 43, 0x0F); > + spi_send(spi, 44, 0x0F); > + spi_send(spi, 45, 0x0F); > + spi_send(spi, 46, 0x0F); > + spi_send(spi, 47, 0x0F); > + spi_send(spi, 48, 0x0F); > + spi_send(spi, 49, 0x0F); > + spi_send(spi, 50, 0x00); > + spi_send(spi, 51, 0x02); > + spi_send(spi, 52, 0x02); > + spi_send(spi, 53, 0x02); > + spi_send(spi, 80, 0x0C); > + spi_send(spi, 83, 0x42); > + spi_send(spi, 84, 0x42); > + spi_send(spi, 85, 0x41); > + spi_send(spi, 86, 0x14); > + spi_send(spi, 89, 0x88); > + spi_send(spi, 90, 0x01); > + spi_send(spi, 91, 0x00); > + spi_send(spi, 92, 0x02); > + spi_send(spi, 93, 0x0C); > + spi_send(spi, 94, 0x1C); > + spi_send(spi, 95, 0x27); > + spi_send(spi, 98, 0x49); > + spi_send(spi, 99, 0x27); > + spi_send(spi, 102, 0x76); > + spi_send(spi, 103, 0x27); > + spi_send(spi, 112, 0x01); > + spi_send(spi, 113, 0x0E); > + spi_send(spi, 114, 0x02); > + spi_send(spi, 115, 0x0C); > + spi_send(spi, 118, 0x0C); > + spi_send(spi, 121, 0x30); /* R121 = 0x30 (normal), 0x10 (reversed) > */ > + spi_send(spi, 130, 0x00); > + spi_send(spi, 131, 0x00); > + spi_send(spi, 132, 0xFC); > + spi_send(spi, 134, 0x00); > + spi_send(spi, 136, 0x00); > + spi_send(spi, 138, 0x00); > + spi_send(spi, 139, 0x00); > + spi_send(spi, 140, 0x00); > + spi_send(spi, 141, 0xFC); > + spi_send(spi, 143, 0x00); > + spi_send(spi, 145, 0x00); > + spi_send(spi, 147, 0x00); > + spi_send(spi, 148, 0x00); > + spi_send(spi, 149, 0x00); > + spi_send(spi, 150, 0xFC); > + spi_send(spi, 152, 0x00); > + spi_send(spi, 154, 0x00); > + spi_send(spi, 156, 0x00); > + spi_send(spi, 157, 0x00); > + udelay(20); > + spi_send(spi, 2, 0x00); > + > + return 0; > +} > + > +static int nec_8048_spi_probe(struct spi_device *spi) > +{ > + spi->mode = SPI_MODE_0; > + spi->bits_per_word = 32; > + spi_setup(spi); > + > + init_nec_8048_wvga_lcd(spi); > + > + return omap_dss_register_driver(&nec_8048_driver); > +} > + > +static int nec_8048_spi_remove(struct spi_device *spi) > +{ > + omap_dss_unregister_driver(&nec_8048_driver); > + > + return 0; > +} > + > +static int nec_8048_spi_suspend(struct spi_device *spi, pm_message_t > mesg) > +{ > + spi_send(spi, 2, 0x01); > + mdelay(40); > + > + return 0; > +} > + > +static int nec_8048_spi_resume(struct spi_device *spi) > +{ > + /* reinitialize the panel */ > + spi_setup(spi); > + spi_send(spi, 2, 0x00); > + init_nec_8048_wvga_lcd(spi); > + > + return 0; > +} > + > +static struct spi_driver nec_8048_spi_driver = { > + .probe = nec_8048_spi_probe, > + .remove = __devexit_p(nec_8048_spi_remove), > + .suspend = nec_8048_spi_suspend, > + .resume = nec_8048_spi_resume, > + .driver = { > + .name = "nec_8048_spi", > + .bus = &spi_bus_type, > + .owner = THIS_MODULE, > + }, > +}; > + > +static int __init nec_8048_lcd_init(void) > +{ > + return spi_register_driver(&nec_8048_spi_driver); > +} > + > +static void __exit nec_8048_lcd_exit(void) > +{ > + return spi_unregister_driver(&nec_8048_spi_driver); > +} > + > +module_init(nec_8048_lcd_init); > +module_exit(nec_8048_lcd_exit); > +MODULE_AUTHOR("Erik Gilling <konkers@android.com>"); > +MODULE_DESCRIPTION("Nec Driver"); > +MODULE_LICENSE("GPL"); > -- > 1.5.6.3 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 3+ messages in thread
* RE: [PATCH 1/1] OMAP: DSS2: Add NEC NL8048HL11-01B display panel 2010-10-20 12:27 ` Hiremath, Vaibhav @ 2010-10-21 5:13 ` Nilofer, Samreen 0 siblings, 0 replies; 3+ messages in thread From: Nilofer, Samreen @ 2010-10-21 5:13 UTC (permalink / raw) To: Hiremath, Vaibhav, linux-omap Cc: Erik Gilling, Subbu Venkatesh, Mittal, Mukund, Rajkumar N > -----Original Message----- > From: Hiremath, Vaibhav > Sent: Wednesday, October 20, 2010 5:57 PM > To: Nilofer, Samreen; linux-omap@vger.kernel.org > Cc: Erik Gilling; Subbu Venkatesh; Mittal, Mukund; Rajkumar N > Subject: RE: [PATCH 1/1] OMAP: DSS2: Add NEC NL8048HL11-01B > display panel > > > -----Original Message----- > > From: linux-omap-owner@vger.kernel.org [mailto:linux-omap- > > owner@vger.kernel.org] On Behalf Of Nilofer, Samreen > > Sent: Thursday, October 14, 2010 4:55 PM > > To: linux-omap@vger.kernel.org > > Cc: Erik Gilling; Subbu Venkatesh; Mittal, Mukund; Rajkumar N; > > Nilofer, Samreen > > Subject: [PATCH 1/1] OMAP: DSS2: Add NEC NL8048HL11-01B > display panel > > > > From: Erik Gilling <konkers@android.com> > > > > NEC WVGA LCD NL8048HL11-01B panel support has been added. > > This panel is being used in zoom2/zoom3/3630 sdp boards. > > > > Signed-off-by: Mukund Mittal <mmittal@ti.com> > > Signed-off-by: Rajkumar N <rajkumar.nagarajan@ti.com> > > Signed-off-by: Samreen <samreen@ti.com> > > CC: Subbu Venkatesh <subramani.venkatesh@windriver.com> > > CC: Erik Gilling <konkers@android.com> > > --- > > This panel driver has orginated from panel-zoom2 from the L25.x > > releases.Refer Commit: > > > > > http://git.omapzoom.org/?p=kernel/omap.git;a=commit;h=75fc121865125d9e > > 3ca3 > > b36f1f19f86b394e1f6b > > > [Hiremath, Vaibhav] Does this cleanly apply on > linux-omap/master branch or tomi's dss2 repo? > You should not be generating patches from any local/custom > repositories. [Samreen] These patch cleanly applies on Tomi' dss2 tree. I have tested and validated this patch on tomi's tree. > > > drivers/video/omap2/displays/Kconfig | 7 + > > drivers/video/omap2/displays/Makefile | 1 + > > .../omap2/displays/panel-nec-nl8048hl11-01b.c | 381 > > ++++++++++++++++++++ > > 3 files changed, 389 insertions(+), 0 deletions(-) create mode > > 100644 drivers/video/omap2/displays/panel-nec-nl8048hl11- > > 01b.c > > > > diff --git a/drivers/video/omap2/displays/Kconfig > > b/drivers/video/omap2/displays/Kconfig > > index 12327bb..f8152cf 100644 > > --- a/drivers/video/omap2/displays/Kconfig > > +++ b/drivers/video/omap2/displays/Kconfig > > @@ -20,6 +20,13 @@ config PANEL_SHARP_LQ043T1DG01 > > help > > LCD Panel used in TI's OMAP3517 EVM boards > > > > +config PANEL_NEC_NL8048HL11_01B > > + tristate "NEC NL8048HL11-01B Panel" > > + depends on OMAP2_DSS > > + help > > + This NEC NL8048HL11-01B panel is TFT LCD > > + used in the Zoom2/3/3630 sdp boards. > > + > > config PANEL_TAAL > > tristate "Taal DSI Panel" > > depends on OMAP2_DSS_DSI > > diff --git a/drivers/video/omap2/displays/Makefile > > b/drivers/video/omap2/displays/Makefile > > index aa38609..8ece91c 100644 > > --- a/drivers/video/omap2/displays/Makefile > > +++ b/drivers/video/omap2/displays/Makefile > > @@ -1,6 +1,7 @@ > > obj-$(CONFIG_PANEL_GENERIC) += panel-generic.o > > obj-$(CONFIG_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o > > obj-$(CONFIG_PANEL_SHARP_LQ043T1DG01) += panel-sharp-lq043t1dg01.o > > +obj-$(CONFIG_PANEL_NEC_NL8048HL11_01B) += > panel-nec-nl8048hl11-01b.o > > > > obj-$(CONFIG_PANEL_TAAL) += panel-taal.o > > obj-$(CONFIG_PANEL_TOPPOLY_TDO35S) += panel-toppoly-tdo35s.o diff > > --git a/drivers/video/omap2/displays/panel-nec-nl8048hl11-01b.c > > b/drivers/video/omap2/displays/panel-nec-nl8048hl11-01b.c > > new file mode 100644 > > index 0000000..cdc0d8f > > --- /dev/null > > +++ b/drivers/video/omap2/displays/panel-nec-nl8048hl11-01b.c > > @@ -0,0 +1,381 @@ > > +/* > > + * Support for NEC-nl8048hl11-01b panel driver > > + * > > + * Copyright (C) 2010 Texas Instruments Inc. > > + * Author: Erik Gilling <konkers@android.com> > > + * This program is free software; you can redistribute it and/or > > +modify > > it > > + * under the terms of the GNU General Public License version 2 as > > published by > > + * the Free Software Foundation. > > + * > > + * This program is distributed in the hope that it will be useful, > > + but > > WITHOUT > > + * ANY WARRANTY; without even the implied warranty of > MERCHANTABILITY > > + or > > + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public > > + License > > for > > + * more details. > > + * > > + * You should have received a copy of the GNU General > Public License > > along with > > + * this program. If not, see <http://www.gnu.org/licenses/>. > > + */ > > + > > +#include <linux/module.h> > > +#include <linux/delay.h> > > +#include <linux/spi/spi.h> > > +#include <plat/display.h> > > +#include <linux/backlight.h> > > +#include <linux/fb.h> > > + > [Hiremath, Vaibhav] It would be nice if you gather all > linux/xxx.h file together, keep one line gap and add all > plat/xxx.h file here. [Samreen] Will fix this. > > > +#define LCD_XRES 800 > > +#define LCD_YRES 480 > > +/* > > + * NEC PIX Clock Ratings > > + * MIN:21.8MHz TYP:23.8MHz MAX:25.7MHz */ > > +#define LCD_PIXEL_CLOCK 23800 > > + > > +struct nec_8048_data { > > + struct backlight_device *bl; > > +}; > > + > > +/* > > + * NEC NL8048HL11-01B Manual > > + * defines HFB, HSW, HBP, VFP, VSW, VBP as shown below */ > > + > > +static struct omap_video_timings nec_8048_panel_timings = { > > + /* 800 x 480 @ 60 Hz Reduced blanking VESA CVT 0.31M3-R */ > > + .x_res = LCD_XRES, > > + .y_res = LCD_YRES, > > + .pixel_clock = LCD_PIXEL_CLOCK, > > + .hfp = 6, > > + .hsw = 1, > > + .hbp = 4, > > + .vfp = 3, > > + .vsw = 1, > > + .vbp = 4, > > +}; > > + > > +static int nec_8048_bl_update_status(struct backlight_device *bl) { > > + struct omap_dss_device *dssdev = dev_get_drvdata(&bl->dev); > > + int level; > > + > > + if (!dssdev->set_backlight) > > + return -EINVAL; > > + > > + if (bl->props.fb_blank == FB_BLANK_UNBLANK && > > + bl->props.power == FB_BLANK_UNBLANK) > > + level = bl->props.brightness; > > + else > > + level = 0; > > + > > + return dssdev->set_backlight(dssdev, level); } > > + > > +static int nec_8048_bl_get_brightness(struct > backlight_device *bl) { > > + if (bl->props.fb_blank == FB_BLANK_UNBLANK && > > + bl->props.power == FB_BLANK_UNBLANK) > > + return bl->props.brightness; > > + > > + return 0; > > +} > > + > > +static const struct backlight_ops nec_8048_bl_ops = { > > + .get_brightness = nec_8048_bl_get_brightness, > > + .update_status = nec_8048_bl_update_status, > > +}; > > + > > +static int nec_8048_panel_probe(struct omap_dss_device *dssdev) { > > + struct backlight_device *bl; > > + struct nec_8048_data *necd; > > + struct backlight_properties props; > > + int r; > > + > > + dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS | > > + OMAP_DSS_LCD_IHS | OMAP_DSS_LCD_RF | > > + OMAP_DSS_LCD_ONOFF; > > + dssdev->panel.timings = nec_8048_panel_timings; > > + > > + necd = kzalloc(sizeof(*necd), GFP_KERNEL); > > + if (!necd) > > + return -ENOMEM; > > + > > + dev_set_drvdata(&dssdev->dev, necd); > > + > > + memset(&props, 0, sizeof(struct backlight_properties)); > > + props.max_brightness = 255; > > + > > + bl = backlight_device_register("nec-8048", &dssdev->dev, dssdev, > > + &nec_8048_bl_ops, &props); > > + if (IS_ERR(bl)) { > > + r = PTR_ERR(bl); > > + kfree(necd); > > + return r; > > + } > > + necd->bl = bl; > > + > > + bl->props.fb_blank = FB_BLANK_UNBLANK; > > + bl->props.power = FB_BLANK_UNBLANK; > > + bl->props.max_brightness = dssdev->max_backlight_level; > > + bl->props.brightness = 0; > > + > > + r = nec_8048_bl_update_status(bl); > > + if (r < 0) > > + dev_err(&dssdev->dev, "failed to set lcd brightness\n"); > > + > > + return 0; > > +} > > + > > +static void nec_8048_panel_remove(struct omap_dss_device *dssdev) { > > + struct nec_8048_data *necd = dev_get_drvdata(&dssdev->dev); > > + struct backlight_device *bl = necd->bl; > > + > > + bl->props.power = FB_BLANK_POWERDOWN; > > + nec_8048_bl_update_status(bl); > > + backlight_device_unregister(bl); > > + > > + kfree(necd); > > +} > > + > > +static int nec_8048_panel_enable(struct omap_dss_device *dssdev) { > > + int r = 0; > > + struct nec_8048_data *necd = dev_get_drvdata(&dssdev->dev); > > + struct backlight_device *bl = necd->bl; > > + > > + if (dssdev->platform_enable) { > > + r = dssdev->platform_enable(dssdev); > > + if (r) > > + return r; > > + } > > + > > + bl->props.brightness = dssdev->max_backlight_level; > [Hiremath, Vaibhav] Don't you think you should be using > bl->props.brightness here, you are overriding user configuration? > [Samreen] Will remove the assignment statement. > > + r = nec_8048_bl_update_status(bl); > > + if (r < 0) > > + dev_err(&dssdev->dev, "failed to set lcd brightness\n"); > > + > > + omapdss_dpi_display_enable(dssdev); > > + > [Hiremath, Vaibhav] Check return value here. [Samreen] Will add the error check. > > + return 0; > > +} > > + > > +static void nec_8048_panel_disable(struct omap_dss_device > *dssdev) { > > + struct nec_8048_data *necd = dev_get_drvdata(&dssdev->dev); > > + struct backlight_device *bl = necd->bl; > > + > > + omapdss_dpi_display_disable(dssdev); > > + > > + bl->props.brightness = 0; > > + nec_8048_bl_update_status(bl); > > + > > + if (dssdev->platform_disable) > > + dssdev->platform_disable(dssdev); > > +} > > + > > +static int nec_8048_panel_suspend(struct omap_dss_device *dssdev) { > > + nec_8048_panel_disable(dssdev); > > + return 0; > > +} > > + > > +static int nec_8048_panel_resume(struct omap_dss_device *dssdev) { > > + return nec_8048_panel_enable(dssdev); } > > + > > +static int nec_8048_recommended_bpp(struct omap_dss_device > *dssdev) { > > + return 16; > > +} > > + > > +static struct omap_dss_driver nec_8048_driver = { > > + .probe = nec_8048_panel_probe, > > + .remove = nec_8048_panel_remove, > > + .enable = nec_8048_panel_enable, > > + .disable = nec_8048_panel_disable, > > + .suspend = nec_8048_panel_suspend, > > + .resume = nec_8048_panel_resume, > > + .get_recommended_bpp = nec_8048_recommended_bpp, > > + > > + .driver = { > > + .name = "NEC_8048_panel", > > + .owner = THIS_MODULE, > > + }, > > +}; > > + > > +static int spi_send(struct spi_device *spi, unsigned char reg_addr, > > + unsigned char reg_data) > > +{ > > + int ret = 0; > > + unsigned int cmd = 0, data = 0; > > + > > + cmd = 0x0000 | reg_addr; /* register address write */ > > + data = 0x0100 | reg_data ; /* register data write */ > > + data = (cmd << 16) | data; > > + > > + ret = spi_write(spi, (unsigned char *)&data, 4); > > + if (ret) { > > + pr_err("error in spi_write %x\n", data); > > + return ret; > > + } > > + > > + return 0; > [Hiremath, Vaibhav] You can have some thing, > > ret = spi_write(spi, (unsigned char *)&data, 4); > if (ret) > pr_err("error in spi_write %x\n", data); > > return ret; > > Thanks, > Vaibhav [Samreen] Will modify this accordingly. Will incorporate all the above comments and post out the next version very soon. Thanks, Warm Regards, Samreen > > > +} > > + > > + > > +static int init_nec_8048_wvga_lcd(struct spi_device *spi) { > > + /* Initialization Sequence */ > > + /* spi_send(spi, REG, VAL) */ > > + spi_send(spi, 3, 0x01); > > + spi_send(spi, 0, 0x00); > > + spi_send(spi, 1, 0x01); /* R1 = 0x01 (normal), 0x03 > (reversed) */ > > + spi_send(spi, 4, 0x00); > > + spi_send(spi, 5, 0x14); > > + spi_send(spi, 6, 0x24); > > + spi_send(spi, 16, 0xD7); > > + spi_send(spi, 17, 0x00); > > + spi_send(spi, 18, 0x00); > > + spi_send(spi, 19, 0x55); > > + spi_send(spi, 20, 0x01); > > + spi_send(spi, 21, 0x70); > > + spi_send(spi, 22, 0x1E); > > + spi_send(spi, 23, 0x25); > > + spi_send(spi, 24, 0x25); > > + spi_send(spi, 25, 0x02); > > + spi_send(spi, 26, 0x02); > > + spi_send(spi, 27, 0xA0); > > + spi_send(spi, 32, 0x2F); > > + spi_send(spi, 33, 0x0F); > > + spi_send(spi, 34, 0x0F); > > + spi_send(spi, 35, 0x0F); > > + spi_send(spi, 36, 0x0F); > > + spi_send(spi, 37, 0x0F); > > + spi_send(spi, 38, 0x0F); > > + spi_send(spi, 39, 0x00); > > + spi_send(spi, 40, 0x02); > > + spi_send(spi, 41, 0x02); > > + spi_send(spi, 42, 0x02); > > + spi_send(spi, 43, 0x0F); > > + spi_send(spi, 44, 0x0F); > > + spi_send(spi, 45, 0x0F); > > + spi_send(spi, 46, 0x0F); > > + spi_send(spi, 47, 0x0F); > > + spi_send(spi, 48, 0x0F); > > + spi_send(spi, 49, 0x0F); > > + spi_send(spi, 50, 0x00); > > + spi_send(spi, 51, 0x02); > > + spi_send(spi, 52, 0x02); > > + spi_send(spi, 53, 0x02); > > + spi_send(spi, 80, 0x0C); > > + spi_send(spi, 83, 0x42); > > + spi_send(spi, 84, 0x42); > > + spi_send(spi, 85, 0x41); > > + spi_send(spi, 86, 0x14); > > + spi_send(spi, 89, 0x88); > > + spi_send(spi, 90, 0x01); > > + spi_send(spi, 91, 0x00); > > + spi_send(spi, 92, 0x02); > > + spi_send(spi, 93, 0x0C); > > + spi_send(spi, 94, 0x1C); > > + spi_send(spi, 95, 0x27); > > + spi_send(spi, 98, 0x49); > > + spi_send(spi, 99, 0x27); > > + spi_send(spi, 102, 0x76); > > + spi_send(spi, 103, 0x27); > > + spi_send(spi, 112, 0x01); > > + spi_send(spi, 113, 0x0E); > > + spi_send(spi, 114, 0x02); > > + spi_send(spi, 115, 0x0C); > > + spi_send(spi, 118, 0x0C); > > + spi_send(spi, 121, 0x30); /* R121 = 0x30 (normal), 0x10 > (reversed) > > */ > > + spi_send(spi, 130, 0x00); > > + spi_send(spi, 131, 0x00); > > + spi_send(spi, 132, 0xFC); > > + spi_send(spi, 134, 0x00); > > + spi_send(spi, 136, 0x00); > > + spi_send(spi, 138, 0x00); > > + spi_send(spi, 139, 0x00); > > + spi_send(spi, 140, 0x00); > > + spi_send(spi, 141, 0xFC); > > + spi_send(spi, 143, 0x00); > > + spi_send(spi, 145, 0x00); > > + spi_send(spi, 147, 0x00); > > + spi_send(spi, 148, 0x00); > > + spi_send(spi, 149, 0x00); > > + spi_send(spi, 150, 0xFC); > > + spi_send(spi, 152, 0x00); > > + spi_send(spi, 154, 0x00); > > + spi_send(spi, 156, 0x00); > > + spi_send(spi, 157, 0x00); > > + udelay(20); > > + spi_send(spi, 2, 0x00); > > + > > + return 0; > > +} > > + > > +static int nec_8048_spi_probe(struct spi_device *spi) { > > + spi->mode = SPI_MODE_0; > > + spi->bits_per_word = 32; > > + spi_setup(spi); > > + > > + init_nec_8048_wvga_lcd(spi); > > + > > + return omap_dss_register_driver(&nec_8048_driver); > > +} > > + > > +static int nec_8048_spi_remove(struct spi_device *spi) { > > + omap_dss_unregister_driver(&nec_8048_driver); > > + > > + return 0; > > +} > > + > > +static int nec_8048_spi_suspend(struct spi_device *spi, > pm_message_t > > mesg) > > +{ > > + spi_send(spi, 2, 0x01); > > + mdelay(40); > > + > > + return 0; > > +} > > + > > +static int nec_8048_spi_resume(struct spi_device *spi) { > > + /* reinitialize the panel */ > > + spi_setup(spi); > > + spi_send(spi, 2, 0x00); > > + init_nec_8048_wvga_lcd(spi); > > + > > + return 0; > > +} > > + > > +static struct spi_driver nec_8048_spi_driver = { > > + .probe = nec_8048_spi_probe, > > + .remove = __devexit_p(nec_8048_spi_remove), > > + .suspend = nec_8048_spi_suspend, > > + .resume = nec_8048_spi_resume, > > + .driver = { > > + .name = "nec_8048_spi", > > + .bus = &spi_bus_type, > > + .owner = THIS_MODULE, > > + }, > > +}; > > + > > +static int __init nec_8048_lcd_init(void) { > > + return spi_register_driver(&nec_8048_spi_driver); > > +} > > + > > +static void __exit nec_8048_lcd_exit(void) { > > + return spi_unregister_driver(&nec_8048_spi_driver); > > +} > > + > > +module_init(nec_8048_lcd_init); > > +module_exit(nec_8048_lcd_exit); > > +MODULE_AUTHOR("Erik Gilling <konkers@android.com>"); > > +MODULE_DESCRIPTION("Nec Driver"); MODULE_LICENSE("GPL"); > > -- > > 1.5.6.3 > > > > -- > > To unsubscribe from this list: send the line "unsubscribe > linux-omap" > > in the body of a message to majordomo@vger.kernel.org More > majordomo > > info at http://vger.kernel.org/majordomo-info.html > ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2010-10-21 5:13 UTC | newest] Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2010-10-14 11:25 [PATCH 1/1] OMAP: DSS2: Add NEC NL8048HL11-01B display panel Samreen 2010-10-20 12:27 ` Hiremath, Vaibhav 2010-10-21 5:13 ` Nilofer, Samreen
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.