* [meta-raspberrypi] Compute Module 3 machine .conf questions @ 2018-04-30 23:40 Steve Pavao 2018-05-01 13:39 ` Andrei Gherzan 0 siblings, 1 reply; 4+ messages in thread From: Steve Pavao @ 2018-04-30 23:40 UTC (permalink / raw) To: yocto Hello, My company has bought a Raspberry Pi Compute Module 3 for evaluation, and I have a 2 questions about the supplied machine .conf files for it. 1. Should the supplied raspberrypi-cm3.conf file internally refer to the Raspberry Pi 3 instead of the Raspberry Pi 2, since the RPi3 is the hardware basis of the Compute Module 3? 2. Should there also be an additional .conf file supplied in the meta-raspberry pi layer for a 64-bit version of poky Linux for the Compute Module 3, just as there is a raspberrypi3-64 machine .conf for the RPi3? Thanks in advance for your thoughts about this. - Steve Pavao Korg R&D . ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [meta-raspberrypi] Compute Module 3 machine .conf questions 2018-04-30 23:40 [meta-raspberrypi] Compute Module 3 machine .conf questions Steve Pavao @ 2018-05-01 13:39 ` Andrei Gherzan 2018-05-02 22:56 ` Steve Pavao 0 siblings, 1 reply; 4+ messages in thread From: Andrei Gherzan @ 2018-05-01 13:39 UTC (permalink / raw) To: Steve Pavao; +Cc: yocto [-- Attachment #1: Type: text/plain, Size: 994 bytes --] Hi Steve, On Tue, May 1, 2018 at 12:40 AM, Steve Pavao <stevep@korgrd.com> wrote: > Hello, > > My company has bought a Raspberry Pi Compute Module 3 for evaluation, and > I have a 2 questions about the supplied machine .conf files for it. > > 1. Should the supplied raspberrypi-cm3.conf file internally refer to the > Raspberry Pi 3 instead of the Raspberry Pi 2, since the RPi3 is the > hardware basis of the Compute Module 3? > RaspberryPi 3 is currently almost the same as RaspberryPi 2 in terms of configuration. What is the problem you are facing? > 2. Should there also be an additional .conf file supplied in the > meta-raspberry pi layer for a 64-bit version of poky Linux for the Compute > Module 3, just as there is a raspberrypi3-64 machine .conf for the RPi3? > You can use directly raspberrypi3-64 as far as I am aware. The cm confs are used as aliases right now. They point to one of the Raspberrypi 2 or 3 machine configurations. -- Andrei G. [-- Attachment #2: Type: text/html, Size: 2306 bytes --] ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [meta-raspberrypi] Compute Module 3 machine .conf questions 2018-05-01 13:39 ` Andrei Gherzan @ 2018-05-02 22:56 ` Steve Pavao 2018-05-14 16:21 ` Andrei Gherzan 0 siblings, 1 reply; 4+ messages in thread From: Steve Pavao @ 2018-05-02 22:56 UTC (permalink / raw) To: Andrei Gherzan; +Cc: yocto [-- Attachment #1: Type: text/plain, Size: 1676 bytes --] Hi Andrei, We were able to verify that we could directly use the raspberrypi3-64.conf for the cm3 as 64-bit, as you had suggested. Thanks for that suggestion. It just seemed a bit confusing that there is only one cm3 machine conf, and it tunnels through to a rpi2. All the online doc about the cm3 mentions the rpi3. A colleague wonders if there are any differences that someone was planning to eventually use that cm3 conf to enumerate, otherwise - having a cm3 conf seems like unnecessary duplication. Thanks again for your help! - Steve Pavao Korg R&D > On May 1, 2018, at 9:39 AM, Andrei Gherzan <andrei@gherzan.ro> wrote: > > Hi Steve, > > On Tue, May 1, 2018 at 12:40 AM, Steve Pavao <stevep@korgrd.com <mailto:stevep@korgrd.com>> wrote: > Hello, > > My company has bought a Raspberry Pi Compute Module 3 for evaluation, and I have a 2 questions about the supplied machine .conf files for it. > > 1. Should the supplied raspberrypi-cm3.conf file internally refer to the Raspberry Pi 3 instead of the Raspberry Pi 2, since the RPi3 is the hardware basis of the Compute Module 3? > > RaspberryPi 3 is currently almost the same as RaspberryPi 2 in terms of configuration. What is the problem you are facing? > > 2. Should there also be an additional .conf file supplied in the meta-raspberry pi layer for a 64-bit version of poky Linux for the Compute Module 3, just as there is a raspberrypi3-64 machine .conf for the RPi3? > > You can use directly raspberrypi3-64 as far as I am aware. The cm confs are used as aliases right now. They point to one of the Raspberrypi 2 or 3 machine configurations. > > -- > Andrei G. [-- Attachment #2: Type: text/html, Size: 3928 bytes --] ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [meta-raspberrypi] Compute Module 3 machine .conf questions 2018-05-02 22:56 ` Steve Pavao @ 2018-05-14 16:21 ` Andrei Gherzan 0 siblings, 0 replies; 4+ messages in thread From: Andrei Gherzan @ 2018-05-14 16:21 UTC (permalink / raw) To: Steve Pavao; +Cc: yocto [-- Attachment #1: Type: text/plain, Size: 2037 bytes --] Currently, the cm3 machine is only there as for people to see clearly what machine as supported. As well, in some cases, we need some machine specific tweaks so we need a new machine - it's not the case here. -- Andrei Gherzan On Wed, May 2, 2018 at 11:56 PM, Steve Pavao <stevep@korgrd.com> wrote: > Hi Andrei, > > We were able to verify that we could directly use the raspberrypi3-64.conf > for the cm3 as 64-bit, as you had suggested. Thanks for that suggestion. > > It just seemed a bit confusing that there is only one cm3 machine conf, > and it tunnels through to a rpi2. All the online doc about the cm3 > mentions the rpi3. A colleague wonders if there are any differences that > someone was planning to eventually use that cm3 conf to enumerate, > otherwise - having a cm3 conf seems like unnecessary duplication. > > Thanks again for your help! > > - Steve Pavao > Korg R&D > > > On May 1, 2018, at 9:39 AM, Andrei Gherzan <andrei@gherzan.ro> wrote: > > Hi Steve, > > On Tue, May 1, 2018 at 12:40 AM, Steve Pavao <stevep@korgrd.com> wrote: > >> Hello, >> >> My company has bought a Raspberry Pi Compute Module 3 for evaluation, and >> I have a 2 questions about the supplied machine .conf files for it. >> >> 1. Should the supplied raspberrypi-cm3.conf file internally refer to the >> Raspberry Pi 3 instead of the Raspberry Pi 2, since the RPi3 is the >> hardware basis of the Compute Module 3? >> > > RaspberryPi 3 is currently almost the same as RaspberryPi 2 in terms of > configuration. What is the problem you are facing? > > >> 2. Should there also be an additional .conf file supplied in the >> meta-raspberry pi layer for a 64-bit version of poky Linux for the Compute >> Module 3, just as there is a raspberrypi3-64 machine .conf for the RPi3? >> > > You can use directly raspberrypi3-64 as far as I am aware. The cm confs > are used as aliases right now. They point to one of the Raspberrypi 2 or 3 > machine configurations. > > -- > Andrei G. > > > [-- Attachment #2: Type: text/html, Size: 4150 bytes --] ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2018-05-14 16:22 UTC | newest] Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2018-04-30 23:40 [meta-raspberrypi] Compute Module 3 machine .conf questions Steve Pavao 2018-05-01 13:39 ` Andrei Gherzan 2018-05-02 22:56 ` Steve Pavao 2018-05-14 16:21 ` Andrei Gherzan
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.