RE: [PATCH 4/5] misc: doc: Add binding doc for the zynqmp afi config driver

[Nava kishore Manne <navam@xilinx.com>]

Hi Rob,

	Thanks for the review.
Please find my response inline.

> -----Original Message-----
> From: Rob Herring <robh@kernel.org>
> Sent: Tuesday, April 20, 2021 7:45 PM
> To: Nava kishore Manne <navam@xilinx.com>
> Cc: Michal Simek <michals@xilinx.com>; Derek Kiernan
> <dkiernan@xilinx.com>; Dragan Cvetic <draganc@xilinx.com>;
> arnd@arndb.de; gregkh@linuxfoundation.org; Rajan Vaja
> <RAJANV@xilinx.com>; Jolly Shah <JOLLYS@xilinx.com>; Tejas Patel
> <tejasp@xlnx.xilinx.com>; Amit Sunil Dhamne <amitsuni@xilinx.com>;
> devicetree@vger.kernel.org; linux-arm-kernel@lists.infradead.org; linux-
> kernel@vger.kernel.org; chinnikishore369@gmail.com; git <git@xilinx.com>
> Subject: Re: [PATCH 4/5] misc: doc: Add binding doc for the zynqmp afi config
> driver
> 
> On Tue, Apr 20, 2021 at 01:41:52PM +0530, Nava kishore Manne wrote:
> > This patch adds the binding document for the zynqmp afi config driver.
> 
> Bindings are for h/w blocks, not drivers.
> 

This Binding are for h/w blocks (PS-PL bus width configurations)
For more info please refer the below links.
https://www.xilinx.com/support/documentation/user_guides/ug1085-zynq-ultrascale-trm.pdf (Page No: 54)
https://www.xilinx.com/support/documentation/ip_documentation/zynq_ultra_ps_e/v3_2/pg201-zynq-ultrascale-plus-processing-system.pdf (Page No: 42).

Please let me know if you need more info..

> >
> > Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com>
> > ---
> >  .../bindings/misc/xlnx,zynqmp-afi-fpga.yaml   | 136 ++++++++++++++++++
> >  1 file changed, 136 insertions(+)
> >  create mode 100644
> > Documentation/devicetree/bindings/misc/xlnx,zynqmp-afi-fpga.yaml
> >
> > diff --git
> > a/Documentation/devicetree/bindings/misc/xlnx,zynqmp-afi-fpga.yaml
> > b/Documentation/devicetree/bindings/misc/xlnx,zynqmp-afi-fpga.yaml
> > new file mode 100644
> > index 000000000000..3ae22096b22a
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/misc/xlnx,zynqmp-afi-
> fpga.yaml
> > @@ -0,0 +1,136 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/misc/xlnx,zynqmp-afi-fpga.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Xilinx ZynqMP AFI interface Manager.
> > +
> > +maintainers:
> > +  - Nava kishore Manne <nava.manne@xilinx.com>
> > +
> > +description: |
> > +  The Zynq UltraScale+ MPSoC Processing System core provides access
> > +from PL
> > +  masters to PS internal peripherals, and memory through AXI FIFO
> > +interface(AFI)
> > +  interfaces.
> > +
> > +properties:
> > +  compatible:
> > +    items:
> > +      - enum:
> > +          - xlnx,zynqmp-afi-fpga
> > +
> > +  config-afi:
> > +    $ref: /schemas/types.yaml#/definitions/uint32-array
> > +    description: |
> > +      Pairs of  <regid value >
> > +      The possible values of regid and values are
> > +      regid - Regids of the register to be written possible values
> 
> If we wanted sequences of register accesses in DT, we'd have a generic
> mechanism to do so.
> 

I will try to find a better way, will get back you on this


Regards,
Navakishore.