* Interrupt lost { .... }
@ 2003-07-21 20:19 dacin
2003-07-22 2:14 ` Andre Hedrick
0 siblings, 1 reply; 3+ messages in thread
From: dacin @ 2003-07-21 20:19 UTC (permalink / raw)
To: linux-kernel, Andre Hedrick
Ello Freinds
I am facing this problem with kernel 2.4.21 any suggestion.
hdb: dma_timer_expiry: dma status == 0x64
hdb: lost interrupt
hdb: dma_intr: bad DMA status (dma_stat=70)
hdb: dma_intr: status=0x50 { DriveReady SeekComplete }
lspci -v | grep IDE
00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 12) (prog-if 80
[Master])
hdparm -I /dev/hdb
/dev/hdb:
ATA device, with non-removable media
Model Number: ST340823A
Serial Number: 7EF2AWX7
Firmware Revision: 3.11
Standards:
Supported: 5 4 3 2
Likely used: 6
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 78165360
device size with M = 1024*1024: 38166 MBytes
device size with M = 1000*1000: 40020 MBytes (40 GB)
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 1
Standby timer values: spec'd by Standard
R/W multiple sector transfer: Max = 16 Current = 16
Recommended acoustic management value: 128, current value: 128
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=240ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* READ BUFFER cmd
* WRITE BUFFER cmd
* Host Protected Area feature set
* Look-ahead
* Write cache
* Power Management feature set
Security Mode feature set
* SMART feature set
* Automatic Acoustic Management feature set
SET MAX security extension
* DOWNLOAD MICROCODE cmd
Security:
Master password revision code = 65534
supported
not enabled
not locked
frozen
not expired: security count
not supported: enhanced erase
HW reset results:
CBLID- above Vih
Device num = 1
Checksum: correct
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Interrupt lost { .... }
2003-07-21 20:19 Interrupt lost { .... } dacin
@ 2003-07-22 2:14 ` Andre Hedrick
2003-07-22 11:15 ` Alan Cox
0 siblings, 1 reply; 3+ messages in thread
From: Andre Hedrick @ 2003-07-22 2:14 UTC (permalink / raw)
To: dacin; +Cc: linux-kernel
I am looking into this issue as my customer base who pays for fixes has
raised the issue.
Cheers,
Andre Hedrick
LAD Storage Consulting Group
On Tue, 22 Jul 2003, dacin wrote:
> Ello Freinds
>
> I am facing this problem with kernel 2.4.21 any suggestion.
>
> hdb: dma_timer_expiry: dma status == 0x64
> hdb: lost interrupt
> hdb: dma_intr: bad DMA status (dma_stat=70)
> hdb: dma_intr: status=0x50 { DriveReady SeekComplete }
>
> lspci -v | grep IDE
> 00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 12) (prog-if 80
> [Master])
>
> hdparm -I /dev/hdb
> /dev/hdb:
>
> ATA device, with non-removable media
> Model Number: ST340823A
> Serial Number: 7EF2AWX7
> Firmware Revision: 3.11
> Standards:
> Supported: 5 4 3 2
> Likely used: 6
> Configuration:
> Logical max current
> cylinders 16383 16383
> heads 16 16
> sectors/track 63 63
> --
> CHS current addressable sectors: 16514064
> LBA user addressable sectors: 78165360
> device size with M = 1024*1024: 38166 MBytes
> device size with M = 1000*1000: 40020 MBytes (40 GB)
> Capabilities:
> LBA, IORDY(can be disabled)
> Queue depth: 1
> Standby timer values: spec'd by Standard
> R/W multiple sector transfer: Max = 16 Current = 16
> Recommended acoustic management value: 128, current value: 128
> DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
> Cycle time: min=120ns recommended=120ns
> PIO: pio0 pio1 pio2 pio3 pio4
> Cycle time: no flow control=240ns IORDY flow control=120ns
> Commands/features:
> Enabled Supported:
> * READ BUFFER cmd
> * WRITE BUFFER cmd
> * Host Protected Area feature set
> * Look-ahead
> * Write cache
> * Power Management feature set
> Security Mode feature set
> * SMART feature set
> * Automatic Acoustic Management feature set
> SET MAX security extension
> * DOWNLOAD MICROCODE cmd
> Security:
> Master password revision code = 65534
> supported
> not enabled
> not locked
> frozen
> not expired: security count
> not supported: enhanced erase
> HW reset results:
> CBLID- above Vih
> Device num = 1
> Checksum: correct
>
>
>
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Interrupt lost { .... }
2003-07-22 2:14 ` Andre Hedrick
@ 2003-07-22 11:15 ` Alan Cox
0 siblings, 0 replies; 3+ messages in thread
From: Alan Cox @ 2003-07-22 11:15 UTC (permalink / raw)
To: Andre Hedrick; +Cc: dacin, Linux Kernel Mailing List
On Maw, 2003-07-22 at 03:14, Andre Hedrick wrote:
> I am looking into this issue as my customer base who pays for fixes has
> raised the issue.
Turn off local APIC support, local APIC without SMP is broken in the
base tree still
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2003-07-22 11:06 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-07-21 20:19 Interrupt lost { .... } dacin
2003-07-22 2:14 ` Andre Hedrick
2003-07-22 11:15 ` Alan Cox
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.