From: Fabrizio Castro <fabrizio.castro-kTT6dE0pTRh9uiUsa/gSgQ@public.gmane.org>
To: Wolfram Sang <wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org>
Cc: Philipp Zabel <p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
Wim Van Sebroeck <wim-IQzOog9fTRqzQB+pC5nmwQ@public.gmane.org>,
Russell King <linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org>,
Catalin Marinas <catalin.marinas-5wv7dgnIgG8@public.gmane.org>,
Will Deacon <will.deacon-5wv7dgnIgG8@public.gmane.org>,
Michael Turquette
<mturquette-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>,
Stephen Boyd <sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
Simon Horman <horms-/R6kz+dDXgpPR4JQBCEnsQ@public.gmane.org>,
Magnus Damm <magnus.damm-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Geert Uytterhoeven
<geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>,
Wolfram Sang
<wsa+renesas-jBu1N2QxHDJrcw3mvpCnnVaTQe2KTcn/@public.gmane.org>,
Guenter Roeck <linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>,
"devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
"linux-watchdog-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<linux-watchdog-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
"linux-renesas-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<linux-renesas-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>l
Subject: RE: [RFC v4 13/26] watchdog: renesas_wdt: Add restart handler
Date: Mon, 12 Feb 2018 11:38:41 +0000 [thread overview]
Message-ID: <TY1PR06MB08958A4A75A0F3BB2BF1D086C0F70@TY1PR06MB0895.apcprd06.prod.outlook.com> (raw)
In-Reply-To: <20180212105456.3zejp3j7hfuzyc3c@ninjato>
> > > I used to have this simpler version (back then for the UP case):
> > >
> > > +rwdt_start(wdev);
> > > +rwdt_write(priv, 0xffff, RWTCNT);
> > > +return 0;
> > >
> > > It should still work probably...
> >
> > It should still work, but it would be slower, I would stick with the
> > version I have submitted if you don't mind.
>
> Actually, I do mind. Because of code duplication reasons. We have a fix
> in the works for rwdt_start() and it would be too easy to overlook the
> same fix will be needed for a restart.
The code is very similar indeed, but not exactly duplicated as it sets the registers in order to reset
the system as quickly as possible.
But since you have strong feelings about this I'll reuse this other version for the next submission.
Thanks,
Fabrizio
Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered No. 04586709.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
To: Wolfram Sang <wsa@the-dreams.de>
Cc: Philipp Zabel <p.zabel@pengutronix.de>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Wim Van Sebroeck <wim@iguana.be>,
Russell King <linux@armlinux.org.uk>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will.deacon@arm.com>,
"Michael Turquette" <mturquette@baylibre.com>,
Stephen Boyd <sboyd@codeaurora.org>,
Simon Horman <horms@verge.net.au>,
Magnus Damm <magnus.damm@gmail.com>,
"Geert Uytterhoeven" <geert+renesas@glider.be>,
Wolfram Sang <wsa+renesas@sang-engineering.com>,
Guenter Roeck <linux@roeck-us.net>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"linux-watchdog@vger.kernel.org" <linux-watchdog@vger.kernel.org>,
"linux-renesas-soc@vger.kernel.org"
<linux-renesas-soc@vger.kernel.org>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
"linux-clk@vger.kernel.org" <linux-clk@vger.kernel.org>,
Chris Paterson <Chris.Paterson2@renesas.com>,
Biju Das <biju.das@bp.renesas.com>,
Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>
Subject: RE: [RFC v4 13/26] watchdog: renesas_wdt: Add restart handler
Date: Mon, 12 Feb 2018 11:38:41 +0000 [thread overview]
Message-ID: <TY1PR06MB08958A4A75A0F3BB2BF1D086C0F70@TY1PR06MB0895.apcprd06.prod.outlook.com> (raw)
In-Reply-To: <20180212105456.3zejp3j7hfuzyc3c@ninjato>
> > > I used to have this simpler version (back then for the UP case):
> > >
> > > +rwdt_start(wdev);
> > > +rwdt_write(priv, 0xffff, RWTCNT);
> > > +return 0;
> > >
> > > It should still work probably...
> >
> > It should still work, but it would be slower, I would stick with the
> > version I have submitted if you don't mind.
>
> Actually, I do mind. Because of code duplication reasons. We have a fix
> in the works for rwdt_start() and it would be too easy to overlook the
> same fix will be needed for a restart.
The code is very similar indeed, but not exactly duplicated as it sets the registers in order to reset
the system as quickly as possible.
But since you have strong feelings about this I'll reuse this other version for the next submission.
Thanks,
Fabrizio
Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered No. 04586709.
WARNING: multiple messages have this Message-ID (diff)
From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
To: Wolfram Sang <wsa@the-dreams.de>
Cc: Philipp Zabel <p.zabel@pengutronix.de>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Wim Van Sebroeck <wim@iguana.be>,
Russell King <linux@armlinux.org.uk>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will.deacon@arm.com>,
"Michael Turquette" <mturquette@baylibre.com>,
Stephen Boyd <sboyd@codeaurora.org>,
Simon Horman <horms@verge.net.au>,
Magnus Damm <magnus.damm@gmail.com>,
"Geert Uytterhoeven" <geert+renesas@glider.be>,
Wolfram Sang <wsa+renesas@sang-engineering.com>,
Guenter Roeck <linux@roeck-us.net>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"linux-watchdog@vger.kernel.org" <linux-watchdog@vger.kernel.org>,
"linux-renesas-soc@vger.kernel.org"
<linux-renesas-soc@vger.kernel.org>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
"linux-clk@vger.kernel.org" <linux-clk@vger.kernel.org>,
Chris Paterson <Chris.Paterson2@renesas.com>,
Biju Das <biju.das@bp.renesas.com>,
Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>
Subject: RE: [RFC v4 13/26] watchdog: renesas_wdt: Add restart handler
Date: Mon, 12 Feb 2018 11:38:41 +0000 [thread overview]
Message-ID: <TY1PR06MB08958A4A75A0F3BB2BF1D086C0F70@TY1PR06MB0895.apcprd06.prod.outlook.com> (raw)
In-Reply-To: <20180212105456.3zejp3j7hfuzyc3c@ninjato>
> > > I used to have this simpler version (back then for the UP case):
> > >
> > > +rwdt_start(wdev);
> > > +rwdt_write(priv, 0xffff, RWTCNT);
> > > +return 0;
> > >
> > > It should still work probably...
> >
> > It should still work, but it would be slower, I would stick with the
> > version I have submitted if you don't mind.
>
> Actually, I do mind. Because of code duplication reasons. We have a fix
> in the works for rwdt_start() and it would be too easy to overlook the
> same fix will be needed for a restart.
The code is very similar indeed, but not exactly duplicated as it sets the =
registers in order to reset
the system as quickly as possible.
But since you have strong feelings about this I'll reuse this other version=
for the next submission.
Thanks,
Fabrizio
Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, B=
uckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered=
No. 04586709.
WARNING: multiple messages have this Message-ID (diff)
From: fabrizio.castro@bp.renesas.com (Fabrizio Castro)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC v4 13/26] watchdog: renesas_wdt: Add restart handler
Date: Mon, 12 Feb 2018 11:38:41 +0000 [thread overview]
Message-ID: <TY1PR06MB08958A4A75A0F3BB2BF1D086C0F70@TY1PR06MB0895.apcprd06.prod.outlook.com> (raw)
In-Reply-To: <20180212105456.3zejp3j7hfuzyc3c@ninjato>
> > > I used to have this simpler version (back then for the UP case):
> > >
> > > +rwdt_start(wdev);
> > > +rwdt_write(priv, 0xffff, RWTCNT);
> > > +return 0;
> > >
> > > It should still work probably...
> >
> > It should still work, but it would be slower, I would stick with the
> > version I have submitted if you don't mind.
>
> Actually, I do mind. Because of code duplication reasons. We have a fix
> in the works for rwdt_start() and it would be too easy to overlook the
> same fix will be needed for a restart.
The code is very similar indeed, but not exactly duplicated as it sets the registers in order to reset
the system as quickly as possible.
But since you have strong feelings about this I'll reuse this other version for the next submission.
Thanks,
Fabrizio
Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered No. 04586709.
next prev parent reply other threads:[~2018-02-12 11:38 UTC|newest]
Thread overview: 157+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-31 18:24 [RFC v4 00/26] Fix watchdog on Renesas R-Car Gen2 and RZ/G1 Fabrizio Castro
2018-01-31 18:24 ` Fabrizio Castro
2018-01-31 18:24 ` Fabrizio Castro
2018-01-31 18:24 ` [RFC v4 01/26] ARM: shmobile: Add watchdog support Fabrizio Castro
2018-01-31 18:24 ` Fabrizio Castro
2018-01-31 18:24 ` [RFC v4 04/26] ARM: dts: r8a7790: Adjust SMP routine size Fabrizio Castro
2018-01-31 18:24 ` Fabrizio Castro
2018-01-31 18:24 ` [RFC v4 06/26] ARM: dts: r8a7792: " Fabrizio Castro
2018-01-31 18:24 ` Fabrizio Castro
2018-01-31 18:24 ` [RFC v4 08/26] ARM: dts: r8a7794: " Fabrizio Castro
2018-01-31 18:24 ` Fabrizio Castro
2018-01-31 18:24 ` [RFC v4 09/26] soc: renesas: rcar-rst: Enable watchdog as reset trigger for Gen2 Fabrizio Castro
2018-01-31 18:24 ` Fabrizio Castro
[not found] ` <1517423070-24236-1-git-send-email-fabrizio.castro-kTT6dE0pTRh9uiUsa/gSgQ@public.gmane.org>
2018-01-31 18:24 ` [RFC v4 02/26] ARM: dts: r8a7743: Adjust SMP routine size Fabrizio Castro
2018-01-31 18:24 ` Fabrizio Castro
2018-01-31 18:24 ` Fabrizio Castro
2018-01-31 18:24 ` [RFC v4 03/26] ARM: dts: r8a7745: " Fabrizio Castro
2018-01-31 18:24 ` Fabrizio Castro
2018-01-31 18:24 ` Fabrizio Castro
2018-01-31 18:24 ` [RFC v4 05/26] ARM: dts: r8a7791: " Fabrizio Castro
2018-01-31 18:24 ` Fabrizio Castro
2018-01-31 18:24 ` Fabrizio Castro
2018-01-31 18:24 ` [RFC v4 07/26] ARM: dts: r8a7793: " Fabrizio Castro
2018-01-31 18:24 ` Fabrizio Castro
2018-01-31 18:24 ` Fabrizio Castro
2018-01-31 18:24 ` [RFC v4 10/26] ARM: shmobile: rcar-gen2: Add watchdog support Fabrizio Castro
2018-01-31 18:24 ` Fabrizio Castro
2018-01-31 18:24 ` Fabrizio Castro
2018-01-31 18:24 ` [RFC v4 11/26] dt-bindings: watchdog: renesas-wdt: Add R-Car Gen2 support Fabrizio Castro
2018-01-31 18:24 ` Fabrizio Castro
2018-01-31 18:24 ` Fabrizio Castro
2018-02-05 6:08 ` Rob Herring
2018-02-05 6:08 ` Rob Herring
2018-02-05 6:08 ` Rob Herring
[not found] ` <1517423070-24236-12-git-send-email-fabrizio.castro-kTT6dE0pTRh9uiUsa/gSgQ@public.gmane.org>
2018-02-07 23:04 ` Wolfram Sang
2018-02-07 23:04 ` Wolfram Sang
2018-02-07 23:04 ` Wolfram Sang
2018-01-31 18:24 ` [RFC v4 12/26] watchdog: renesas_wdt: " Fabrizio Castro
2018-01-31 18:24 ` Fabrizio Castro
2018-01-31 18:24 ` Fabrizio Castro
[not found] ` <1517423070-24236-13-git-send-email-fabrizio.castro-kTT6dE0pTRh9uiUsa/gSgQ@public.gmane.org>
2018-02-02 2:56 ` Guenter Roeck
2018-02-02 2:56 ` Guenter Roeck
2018-02-02 2:56 ` Guenter Roeck
[not found] ` <2dd9f76d-b3e9-31f2-11eb-272d327f3b01-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
2018-02-05 11:16 ` Fabrizio Castro
2018-02-05 11:16 ` Fabrizio Castro
2018-02-05 11:16 ` Fabrizio Castro
2018-02-05 11:16 ` Fabrizio Castro
2018-02-07 22:53 ` Wolfram Sang
2018-02-07 22:53 ` Wolfram Sang
2018-02-07 22:53 ` Wolfram Sang
2018-02-12 10:31 ` Fabrizio Castro
2018-02-12 10:31 ` Fabrizio Castro
2018-02-12 10:31 ` Fabrizio Castro
2018-02-12 10:31 ` Fabrizio Castro
2018-01-31 18:24 ` [RFC v4 13/26] watchdog: renesas_wdt: Add restart handler Fabrizio Castro
2018-01-31 18:24 ` Fabrizio Castro
2018-01-31 18:24 ` Fabrizio Castro
[not found] ` <1517423070-24236-14-git-send-email-fabrizio.castro-kTT6dE0pTRh9uiUsa/gSgQ@public.gmane.org>
2018-02-02 2:58 ` Guenter Roeck
2018-02-02 2:58 ` Guenter Roeck
2018-02-02 2:58 ` Guenter Roeck
2018-02-07 15:46 ` Geert Uytterhoeven
2018-02-07 15:46 ` Geert Uytterhoeven
2018-02-07 15:46 ` Geert Uytterhoeven
2018-02-07 15:55 ` Fabrizio Castro
2018-02-07 15:55 ` Fabrizio Castro
2018-02-07 15:55 ` Fabrizio Castro
2018-02-07 15:55 ` Fabrizio Castro
2018-02-07 23:03 ` Wolfram Sang
2018-02-07 23:03 ` Wolfram Sang
2018-02-07 23:03 ` Wolfram Sang
2018-02-12 10:33 ` Fabrizio Castro
2018-02-12 10:33 ` Fabrizio Castro
2018-02-12 10:33 ` Fabrizio Castro
2018-02-12 10:33 ` Fabrizio Castro
2018-02-12 10:54 ` Wolfram Sang
2018-02-12 10:54 ` Wolfram Sang
2018-02-12 10:54 ` Wolfram Sang
2018-02-12 11:38 ` Fabrizio Castro [this message]
2018-02-12 11:38 ` Fabrizio Castro
2018-02-12 11:38 ` Fabrizio Castro
2018-02-12 11:38 ` Fabrizio Castro
2018-01-31 18:24 ` [RFC v4 14/26] ARM: shmobile: defconfig: Enable RENESAS_WDT_GEN Fabrizio Castro
2018-01-31 18:24 ` Fabrizio Castro
2018-01-31 18:24 ` Fabrizio Castro
[not found] ` <1517423070-24236-15-git-send-email-fabrizio.castro-kTT6dE0pTRh9uiUsa/gSgQ@public.gmane.org>
2018-02-07 23:11 ` Wolfram Sang
2018-02-07 23:11 ` Wolfram Sang
2018-02-07 23:11 ` Wolfram Sang
2018-01-31 18:24 ` [RFC v4 16/26] clk: renesas: r8a7745: Add rwdt clock Fabrizio Castro
2018-01-31 18:24 ` Fabrizio Castro
2018-01-31 18:24 ` Fabrizio Castro
[not found] ` <1517423070-24236-17-git-send-email-fabrizio.castro-kTT6dE0pTRh9uiUsa/gSgQ@public.gmane.org>
2018-02-07 23:16 ` Wolfram Sang
2018-02-07 23:16 ` Wolfram Sang
2018-02-07 23:16 ` Wolfram Sang
2018-01-31 18:24 ` [RFC v4 18/26] clk: renesas: r8a7791/r8a7793: " Fabrizio Castro
2018-01-31 18:24 ` Fabrizio Castro
2018-01-31 18:24 ` Fabrizio Castro
2018-02-07 23:17 ` Wolfram Sang
2018-02-07 23:17 ` Wolfram Sang
2018-02-07 23:17 ` Wolfram Sang
2018-01-31 18:24 ` [RFC v4 20/26] ARM: dts: r8a7743: Add watchdog support to SoC dtsi Fabrizio Castro
2018-01-31 18:24 ` Fabrizio Castro
2018-01-31 18:24 ` Fabrizio Castro
[not found] ` <1517423070-24236-21-git-send-email-fabrizio.castro-kTT6dE0pTRh9uiUsa/gSgQ@public.gmane.org>
2018-02-07 23:20 ` Wolfram Sang
2018-02-07 23:20 ` Wolfram Sang
2018-02-07 23:20 ` Wolfram Sang
2018-01-31 18:24 ` [RFC v4 21/26] ARM: dts: r8a7745: " Fabrizio Castro
2018-01-31 18:24 ` Fabrizio Castro
2018-01-31 18:24 ` Fabrizio Castro
[not found] ` <1517423070-24236-22-git-send-email-fabrizio.castro-kTT6dE0pTRh9uiUsa/gSgQ@public.gmane.org>
2018-02-07 23:20 ` Wolfram Sang
2018-02-07 23:20 ` Wolfram Sang
2018-02-07 23:20 ` Wolfram Sang
2018-01-31 18:24 ` [RFC v4 22/26] ARM: dts: r8a7790: " Fabrizio Castro
2018-01-31 18:24 ` Fabrizio Castro
2018-01-31 18:24 ` Fabrizio Castro
2018-02-07 23:20 ` Wolfram Sang
2018-02-07 23:20 ` Wolfram Sang
2018-02-07 23:20 ` Wolfram Sang
2018-01-31 18:24 ` [RFC v4 23/26] ARM: dts: r8a7791: " Fabrizio Castro
2018-01-31 18:24 ` Fabrizio Castro
2018-01-31 18:24 ` Fabrizio Castro
2018-02-07 23:20 ` Wolfram Sang
2018-02-07 23:20 ` Wolfram Sang
2018-02-07 23:20 ` Wolfram Sang
2018-01-31 18:24 ` [RFC v4 26/26] ARM: dts: iwg22m: Add watchdog support to SoM dtsi Fabrizio Castro
2018-01-31 18:24 ` Fabrizio Castro
2018-01-31 18:24 ` Fabrizio Castro
2018-02-07 23:21 ` Wolfram Sang
2018-02-07 23:21 ` Wolfram Sang
2018-02-07 23:21 ` Wolfram Sang
2018-01-31 18:24 ` [RFC v4 15/26] clk: renesas: r8a7743: Add rwdt clock Fabrizio Castro
2018-01-31 18:24 ` Fabrizio Castro
[not found] ` <1517423070-24236-16-git-send-email-fabrizio.castro-kTT6dE0pTRh9uiUsa/gSgQ@public.gmane.org>
2018-02-07 23:12 ` Wolfram Sang
2018-02-07 23:12 ` Wolfram Sang
2018-02-07 23:12 ` Wolfram Sang
2018-01-31 18:24 ` [RFC v4 17/26] clk: renesas: r8a7790: " Fabrizio Castro
2018-01-31 18:24 ` Fabrizio Castro
2018-02-07 23:17 ` Wolfram Sang
2018-02-07 23:17 ` Wolfram Sang
2018-02-07 23:17 ` Wolfram Sang
2018-01-31 18:24 ` [RFC v4 19/26] clk: renesas: r8a7794: " Fabrizio Castro
2018-01-31 18:24 ` Fabrizio Castro
[not found] ` <1517423070-24236-20-git-send-email-fabrizio.castro-kTT6dE0pTRh9uiUsa/gSgQ@public.gmane.org>
2018-02-07 23:17 ` Wolfram Sang
2018-02-07 23:17 ` Wolfram Sang
2018-02-07 23:17 ` Wolfram Sang
2018-01-31 18:24 ` [RFC v4 24/26] ARM: dts: r8a7794: Add watchdog support to SoC dtsi Fabrizio Castro
2018-01-31 18:24 ` Fabrizio Castro
[not found] ` <1517423070-24236-25-git-send-email-fabrizio.castro-kTT6dE0pTRh9uiUsa/gSgQ@public.gmane.org>
2018-02-07 23:20 ` Wolfram Sang
2018-02-07 23:20 ` Wolfram Sang
2018-02-07 23:20 ` Wolfram Sang
2018-01-31 18:24 ` [RFC v4 25/26] ARM: dts: iwg20m: Add watchdog support to SoM dtsi Fabrizio Castro
2018-01-31 18:24 ` Fabrizio Castro
[not found] ` <1517423070-24236-26-git-send-email-fabrizio.castro-kTT6dE0pTRh9uiUsa/gSgQ@public.gmane.org>
2018-02-07 23:21 ` Wolfram Sang
2018-02-07 23:21 ` Wolfram Sang
2018-02-07 23:21 ` Wolfram Sang
2018-02-06 15:44 ` [RFC v4 00/26] Fix watchdog on Renesas R-Car Gen2 and RZ/G1 Geert Uytterhoeven
2018-02-06 15:44 ` Geert Uytterhoeven
2018-02-06 15:44 ` Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=TY1PR06MB08958A4A75A0F3BB2BF1D086C0F70@TY1PR06MB0895.apcprd06.prod.outlook.com \
--to=fabrizio.castro-ktt6de0ptrh9uiusa/gsgq@public.gmane.org \
--cc=catalin.marinas-5wv7dgnIgG8@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org \
--cc=horms-/R6kz+dDXgpPR4JQBCEnsQ@public.gmane.org \
--cc=linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org \
--cc=linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org \
--cc=linux-renesas-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-watchdog-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=magnus.damm-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=mturquette-rdvid1DuHRBWk0Htik3J/w@public.gmane.org \
--cc=p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=will.deacon-5wv7dgnIgG8@public.gmane.org \
--cc=wim-IQzOog9fTRqzQB+pC5nmwQ@public.gmane.org \
--cc=wsa+renesas-jBu1N2QxHDJrcw3mvpCnnVaTQe2KTcn/@public.gmane.org \
--cc=wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.