[U-Boot] [EXT] Re: [PATCH 1/3 v3] armv8: ls1028a: Add NXP LS1028A SoC support

[Andy Tang <andy.tang@nxp.com>]

Hi Bin,

> -----Original Message-----
> From: Bin Meng <bmeng.cn@gmail.com>
> Sent: 2019年5月16日 20:10
> To: Andy Tang <andy.tang@nxp.com>; Simon Glass <sjg@chromium.org>;
> Tom Rini <trini@konsulko.com>
> Cc: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>; Sudhanshu
> Gupta <sudhanshu.gupta@nxp.com>; U-Boot Mailing List
> <u-boot@lists.denx.de>; Ran Wang <ran.wang_1@nxp.com>; Bhaskar
> Upadhaya <bhaskar.upadhaya@nxp.com>
> Subject: [EXT] Re: [U-Boot] [PATCH 1/3 v3] armv8: ls1028a: Add NXP LS1028A
> SoC support
> 
> 
> Hi,
> 
> On Wed, Apr 10, 2019 at 4:50 PM Yuantian Tang <andy.tang@nxp.com>
> wrote:
> >
> > Ls1028a Soc is based on Layerscape Chassis Generation 3.2 architecture
> > with features:
> >  2 ARM v8 Cortex-A72 cores, CCI400, SEC, DDR3L/4, LCD, GPU, TSN
> > ENETC, 2 USB 3.0, 2 eSDHC, 2 FlexCAN, 2 SPI, SATA, 8 I2C controllers,
> >  6 LPUARTs, GPIO, SAI, qDMA, eDMA, GIC, TMU etc.
> >
> > Signed-off-by: Sudhanshu Gupta <sudhanshu.gupta@nxp.com>
> > Signed-off-by: Rai Harninder <harninder.rai@nxp.com>
> > Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
> > Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
> > Signed-off-by: Tang Yuantian <andy.tang@nxp.com>
> > ---
> > v3:
> >         -- fix some issues
> >  arch/arm/cpu/armv8/fsl-layerscape/Kconfig          |  39 ++-
> >  arch/arm/cpu/armv8/fsl-layerscape/Makefile         |   4 +
> >  arch/arm/cpu/armv8/fsl-layerscape/cpu.c            |   3 +
> >  arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc   |  51 ++++
> >  arch/arm/cpu/armv8/fsl-layerscape/ls1028a_serdes.c |  73 ++++++
> >  arch/arm/dts/fsl-ls1028a.dtsi                      | 280
> +++++++++++++++++++++
> >  arch/arm/include/asm/arch-fsl-layerscape/config.h  |  61 +++++
> >  .../include/asm/arch-fsl-layerscape/immap_lsch3.h  |   9 +
> >  arch/arm/include/asm/arch-fsl-layerscape/soc.h     |   1 +
> >  .../asm/arch-fsl-layerscape/stream_id_lsch3.h      |   2 +-
> >  10 files changed, 521 insertions(+), 2 deletions(-)  create mode
> > 100644 arch/arm/cpu/armv8/fsl-layerscape/ls1028a_serdes.c
> >  create mode 100644 arch/arm/dts/fsl-ls1028a.dtsi
> >
> 
> I really would like to see complete DM driver support on this new platform.
> Please consider converting appropriate codes to driver model. If there is no
> proper uclass model, please propose one and discuss it on the list. I see the
> existing NXP PowerPC support is stuck in such a situation that lots of codes
> are still non-DM and we are getting close to the DM deadline. I don't want to
> see such happens again in the NXP ARM support.
Could you please be more specific which part of code is non-DM based?
I checked it and didn't find where is non-DM. 
Thanks for your review.

BR,
Andy
> 
> Thanks!
> 
> Regards,
> Bin