From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Cc: linux-renesas-soc@vger.kernel.org, linux-media@vger.kernel.org,
dri-devel@lists.freedesktop.org,
Kieran Bingham <kieran.bingham@ideasonboard.com>,
Nicolas Dufresne <nicolas@ndufresne.ca>,
Geert Uytterhoeven <geert@linux-m68k.org>
Subject: Re: [PATCH v2 1/7] media: Add 2-10-10-10 RGB formats
Date: Mon, 19 Dec 2022 21:10:54 +0200 [thread overview]
Message-ID: <Y6C3PtnjAdv/seMy@pendragon.ideasonboard.com> (raw)
In-Reply-To: <20221219140139.294245-2-tomi.valkeinen+renesas@ideasonboard.com>
Hi Tomi,
Thank you for the patch.
On Mon, Dec 19, 2022 at 04:01:33PM +0200, Tomi Valkeinen wrote:
> Add XBGR2101010, ABGR2101010 and BGRA1010102 formats.
>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
> ---
> .../userspace-api/media/v4l/pixfmt-rgb.rst | 194 ++++++++++++++++++
> drivers/media/v4l2-core/v4l2-ioctl.c | 3 +
> include/uapi/linux/videodev2.h | 3 +
> 3 files changed, 200 insertions(+)
>
> diff --git a/Documentation/userspace-api/media/v4l/pixfmt-rgb.rst b/Documentation/userspace-api/media/v4l/pixfmt-rgb.rst
> index 30f51cd33f99..de78cd2dcd73 100644
> --- a/Documentation/userspace-api/media/v4l/pixfmt-rgb.rst
> +++ b/Documentation/userspace-api/media/v4l/pixfmt-rgb.rst
> @@ -763,6 +763,200 @@ nomenclature that instead use the order of components as seen in a 24- or
> \normalsize
>
>
> +10 Bits Per Component
> +=====================
> +
> +These formats store a 30-bit RGB triplet with an optional 2 bit alpha in four
> +bytes. They are named based on the order of the RGB components as seen in a
> +32-bit word, which is then stored in memory in little endian byte order
> +(unless otherwise noted by the presence of bit 31 in the 4CC value), and on the
> +number of bits for each component.
> +
> +.. raw:: latex
> +
> + \begingroup
> + \tiny
> + \setlength{\tabcolsep}{2pt}
> +
> +.. tabularcolumns:: |p{2.8cm}|p{2.0cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|
> +
> +
> +.. flat-table:: RGB Formats 10 Bits Per Color Component
> + :header-rows: 2
> + :stub-columns: 0
> +
> + * - Identifier
> + - Code
> + - :cspan:`7` Byte 0 in memory
> + - :cspan:`7` Byte 1
> + - :cspan:`7` Byte 2
> + - :cspan:`7` Byte 3
> + * -
> + -
> + - 7
> + - 6
> + - 5
> + - 4
> + - 3
> + - 2
> + - 1
> + - 0
> +
> + - 7
> + - 6
> + - 5
> + - 4
> + - 3
> + - 2
> + - 1
> + - 0
> +
> + - 7
> + - 6
> + - 5
> + - 4
> + - 3
> + - 2
> + - 1
> + - 0
> +
> + - 7
> + - 6
> + - 5
> + - 4
> + - 3
> + - 2
> + - 1
> + - 0
> + * .. _V4L2-PIX-FMT-XBGR2101010:
> +
> + - ``V4L2_PIX_FMT_XBGR2101010``
> + - 'RX30'
> +
> + - b\ :sub:`5`
> + - b\ :sub:`4`
> + - b\ :sub:`3`
> + - b\ :sub:`2`
> + - b\ :sub:`1`
> + - b\ :sub:`0`
> + - x
> + - x
> +
> + - g\ :sub:`3`
> + - g\ :sub:`2`
> + - g\ :sub:`1`
> + - g\ :sub:`0`
> + - b\ :sub:`9`
> + - b\ :sub:`8`
> + - b\ :sub:`7`
> + - b\ :sub:`6`
> +
> + - r\ :sub:`1`
> + - r\ :sub:`0`
> + - g\ :sub:`9`
> + - g\ :sub:`8`
> + - g\ :sub:`7`
> + - g\ :sub:`6`
> + - g\ :sub:`5`
> + - g\ :sub:`4`
> +
> + - r\ :sub:`9`
> + - r\ :sub:`8`
> + - r\ :sub:`7`
> + - r\ :sub:`6`
> + - r\ :sub:`5`
> + - r\ :sub:`4`
> + - r\ :sub:`3`
> + - r\ :sub:`2`
> + -
This doesn't match the text above. This would be RGBX2101010. I'm not
sure which format you want, so I don't know if it's the documentation or
the format name that is incorrect. The next two formats also seem
incorrect to me.
> + * .. _V4L2-PIX-FMT-ABGR2101010:
> +
> + - ``V4L2_PIX_FMT_ABGR2101010``
> + - 'RA30'
> +
> + - b\ :sub:`5`
> + - b\ :sub:`4`
> + - b\ :sub:`3`
> + - b\ :sub:`2`
> + - b\ :sub:`1`
> + - b\ :sub:`0`
> + - a\ :sub:`1`
> + - a\ :sub:`0`
> +
> + - g\ :sub:`3`
> + - g\ :sub:`2`
> + - g\ :sub:`1`
> + - g\ :sub:`0`
> + - b\ :sub:`9`
> + - b\ :sub:`8`
> + - b\ :sub:`7`
> + - b\ :sub:`6`
> +
> + - r\ :sub:`1`
> + - r\ :sub:`0`
> + - g\ :sub:`9`
> + - g\ :sub:`8`
> + - g\ :sub:`7`
> + - g\ :sub:`6`
> + - g\ :sub:`5`
> + - g\ :sub:`4`
> +
> + - r\ :sub:`9`
> + - r\ :sub:`8`
> + - r\ :sub:`7`
> + - r\ :sub:`6`
> + - r\ :sub:`5`
> + - r\ :sub:`4`
> + - r\ :sub:`3`
> + - r\ :sub:`2`
> + -
> + * .. _V4L2-PIX-FMT-BGRA1010102:
> +
> + - ``V4L2_PIX_FMT_BGRA1010102``
> + - 'AR30'
> +
> + - b\ :sub:`7`
> + - b\ :sub:`6`
> + - b\ :sub:`5`
> + - b\ :sub:`4`
> + - b\ :sub:`3`
> + - b\ :sub:`2`
> + - b\ :sub:`1`
> + - b\ :sub:`0`
> +
> + - g\ :sub:`5`
> + - g\ :sub:`4`
> + - g\ :sub:`3`
> + - g\ :sub:`2`
> + - g\ :sub:`1`
> + - g\ :sub:`0`
> + - b\ :sub:`9`
> + - b\ :sub:`8`
> +
> + - r\ :sub:`3`
> + - r\ :sub:`2`
> + - r\ :sub:`1`
> + - r\ :sub:`0`
> + - g\ :sub:`9`
> + - g\ :sub:`8`
> + - g\ :sub:`7`
> + - g\ :sub:`6`
> +
> + - a\ :sub:`1`
> + - a\ :sub:`0`
> + - r\ :sub:`9`
> + - r\ :sub:`8`
> + - r\ :sub:`7`
> + - r\ :sub:`6`
> + - r\ :sub:`5`
> + - r\ :sub:`4`
> + -
> +
> +.. raw:: latex
> +
> + \endgroup
> +
> +
> Deprecated RGB Formats
> ======================
>
> diff --git a/drivers/media/v4l2-core/v4l2-ioctl.c b/drivers/media/v4l2-core/v4l2-ioctl.c
> index fddba75d9074..964300deaf62 100644
> --- a/drivers/media/v4l2-core/v4l2-ioctl.c
> +++ b/drivers/media/v4l2-core/v4l2-ioctl.c
> @@ -1304,6 +1304,9 @@ static void v4l_fill_fmtdesc(struct v4l2_fmtdesc *fmt)
> case V4L2_PIX_FMT_BGRX32: descr = "32-bit XBGR 8-8-8-8"; break;
> case V4L2_PIX_FMT_RGBA32: descr = "32-bit RGBA 8-8-8-8"; break;
> case V4L2_PIX_FMT_RGBX32: descr = "32-bit RGBX 8-8-8-8"; break;
> + case V4L2_PIX_FMT_XBGR2101010: descr = "32-bit XBGR 2-10-10-10"; break;
> + case V4L2_PIX_FMT_ABGR2101010: descr = "32-bit ABGR 2-10-10-10"; break;
> + case V4L2_PIX_FMT_BGRA1010102: descr = "32-bit BGRA 10-10-10-2"; break;
> case V4L2_PIX_FMT_GREY: descr = "8-bit Greyscale"; break;
> case V4L2_PIX_FMT_Y4: descr = "4-bit Greyscale"; break;
> case V4L2_PIX_FMT_Y6: descr = "6-bit Greyscale"; break;
> diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h
> index 29da1f4b4578..877fd61693b8 100644
> --- a/include/uapi/linux/videodev2.h
> +++ b/include/uapi/linux/videodev2.h
> @@ -576,6 +576,9 @@ struct v4l2_pix_format {
> #define V4L2_PIX_FMT_RGBX32 v4l2_fourcc('X', 'B', '2', '4') /* 32 RGBX-8-8-8-8 */
> #define V4L2_PIX_FMT_ARGB32 v4l2_fourcc('B', 'A', '2', '4') /* 32 ARGB-8-8-8-8 */
> #define V4L2_PIX_FMT_XRGB32 v4l2_fourcc('B', 'X', '2', '4') /* 32 XRGB-8-8-8-8 */
> +#define V4L2_PIX_FMT_XBGR2101010 v4l2_fourcc('R', 'X', '3', '0') /* 32 XBGR-2-10-10-10 */
> +#define V4L2_PIX_FMT_ABGR2101010 v4l2_fourcc('R', 'A', '3', '0') /* 32 ABGR-2-10-10-10 */
> +#define V4L2_PIX_FMT_BGRA1010102 v4l2_fourcc('A', 'R', '3', '0') /* 32 BGRA-10-10-10-2 */
>
> /* Grey formats */
> #define V4L2_PIX_FMT_GREY v4l2_fourcc('G', 'R', 'E', 'Y') /* 8 Greyscale */
--
Regards,
Laurent Pinchart
WARNING: multiple messages have this Message-ID (diff)
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Cc: Kieran Bingham <kieran.bingham@ideasonboard.com>,
dri-devel@lists.freedesktop.org,
Nicolas Dufresne <nicolas@ndufresne.ca>,
linux-renesas-soc@vger.kernel.org,
Geert Uytterhoeven <geert@linux-m68k.org>,
linux-media@vger.kernel.org
Subject: Re: [PATCH v2 1/7] media: Add 2-10-10-10 RGB formats
Date: Mon, 19 Dec 2022 21:10:54 +0200 [thread overview]
Message-ID: <Y6C3PtnjAdv/seMy@pendragon.ideasonboard.com> (raw)
In-Reply-To: <20221219140139.294245-2-tomi.valkeinen+renesas@ideasonboard.com>
Hi Tomi,
Thank you for the patch.
On Mon, Dec 19, 2022 at 04:01:33PM +0200, Tomi Valkeinen wrote:
> Add XBGR2101010, ABGR2101010 and BGRA1010102 formats.
>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
> ---
> .../userspace-api/media/v4l/pixfmt-rgb.rst | 194 ++++++++++++++++++
> drivers/media/v4l2-core/v4l2-ioctl.c | 3 +
> include/uapi/linux/videodev2.h | 3 +
> 3 files changed, 200 insertions(+)
>
> diff --git a/Documentation/userspace-api/media/v4l/pixfmt-rgb.rst b/Documentation/userspace-api/media/v4l/pixfmt-rgb.rst
> index 30f51cd33f99..de78cd2dcd73 100644
> --- a/Documentation/userspace-api/media/v4l/pixfmt-rgb.rst
> +++ b/Documentation/userspace-api/media/v4l/pixfmt-rgb.rst
> @@ -763,6 +763,200 @@ nomenclature that instead use the order of components as seen in a 24- or
> \normalsize
>
>
> +10 Bits Per Component
> +=====================
> +
> +These formats store a 30-bit RGB triplet with an optional 2 bit alpha in four
> +bytes. They are named based on the order of the RGB components as seen in a
> +32-bit word, which is then stored in memory in little endian byte order
> +(unless otherwise noted by the presence of bit 31 in the 4CC value), and on the
> +number of bits for each component.
> +
> +.. raw:: latex
> +
> + \begingroup
> + \tiny
> + \setlength{\tabcolsep}{2pt}
> +
> +.. tabularcolumns:: |p{2.8cm}|p{2.0cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|
> +
> +
> +.. flat-table:: RGB Formats 10 Bits Per Color Component
> + :header-rows: 2
> + :stub-columns: 0
> +
> + * - Identifier
> + - Code
> + - :cspan:`7` Byte 0 in memory
> + - :cspan:`7` Byte 1
> + - :cspan:`7` Byte 2
> + - :cspan:`7` Byte 3
> + * -
> + -
> + - 7
> + - 6
> + - 5
> + - 4
> + - 3
> + - 2
> + - 1
> + - 0
> +
> + - 7
> + - 6
> + - 5
> + - 4
> + - 3
> + - 2
> + - 1
> + - 0
> +
> + - 7
> + - 6
> + - 5
> + - 4
> + - 3
> + - 2
> + - 1
> + - 0
> +
> + - 7
> + - 6
> + - 5
> + - 4
> + - 3
> + - 2
> + - 1
> + - 0
> + * .. _V4L2-PIX-FMT-XBGR2101010:
> +
> + - ``V4L2_PIX_FMT_XBGR2101010``
> + - 'RX30'
> +
> + - b\ :sub:`5`
> + - b\ :sub:`4`
> + - b\ :sub:`3`
> + - b\ :sub:`2`
> + - b\ :sub:`1`
> + - b\ :sub:`0`
> + - x
> + - x
> +
> + - g\ :sub:`3`
> + - g\ :sub:`2`
> + - g\ :sub:`1`
> + - g\ :sub:`0`
> + - b\ :sub:`9`
> + - b\ :sub:`8`
> + - b\ :sub:`7`
> + - b\ :sub:`6`
> +
> + - r\ :sub:`1`
> + - r\ :sub:`0`
> + - g\ :sub:`9`
> + - g\ :sub:`8`
> + - g\ :sub:`7`
> + - g\ :sub:`6`
> + - g\ :sub:`5`
> + - g\ :sub:`4`
> +
> + - r\ :sub:`9`
> + - r\ :sub:`8`
> + - r\ :sub:`7`
> + - r\ :sub:`6`
> + - r\ :sub:`5`
> + - r\ :sub:`4`
> + - r\ :sub:`3`
> + - r\ :sub:`2`
> + -
This doesn't match the text above. This would be RGBX2101010. I'm not
sure which format you want, so I don't know if it's the documentation or
the format name that is incorrect. The next two formats also seem
incorrect to me.
> + * .. _V4L2-PIX-FMT-ABGR2101010:
> +
> + - ``V4L2_PIX_FMT_ABGR2101010``
> + - 'RA30'
> +
> + - b\ :sub:`5`
> + - b\ :sub:`4`
> + - b\ :sub:`3`
> + - b\ :sub:`2`
> + - b\ :sub:`1`
> + - b\ :sub:`0`
> + - a\ :sub:`1`
> + - a\ :sub:`0`
> +
> + - g\ :sub:`3`
> + - g\ :sub:`2`
> + - g\ :sub:`1`
> + - g\ :sub:`0`
> + - b\ :sub:`9`
> + - b\ :sub:`8`
> + - b\ :sub:`7`
> + - b\ :sub:`6`
> +
> + - r\ :sub:`1`
> + - r\ :sub:`0`
> + - g\ :sub:`9`
> + - g\ :sub:`8`
> + - g\ :sub:`7`
> + - g\ :sub:`6`
> + - g\ :sub:`5`
> + - g\ :sub:`4`
> +
> + - r\ :sub:`9`
> + - r\ :sub:`8`
> + - r\ :sub:`7`
> + - r\ :sub:`6`
> + - r\ :sub:`5`
> + - r\ :sub:`4`
> + - r\ :sub:`3`
> + - r\ :sub:`2`
> + -
> + * .. _V4L2-PIX-FMT-BGRA1010102:
> +
> + - ``V4L2_PIX_FMT_BGRA1010102``
> + - 'AR30'
> +
> + - b\ :sub:`7`
> + - b\ :sub:`6`
> + - b\ :sub:`5`
> + - b\ :sub:`4`
> + - b\ :sub:`3`
> + - b\ :sub:`2`
> + - b\ :sub:`1`
> + - b\ :sub:`0`
> +
> + - g\ :sub:`5`
> + - g\ :sub:`4`
> + - g\ :sub:`3`
> + - g\ :sub:`2`
> + - g\ :sub:`1`
> + - g\ :sub:`0`
> + - b\ :sub:`9`
> + - b\ :sub:`8`
> +
> + - r\ :sub:`3`
> + - r\ :sub:`2`
> + - r\ :sub:`1`
> + - r\ :sub:`0`
> + - g\ :sub:`9`
> + - g\ :sub:`8`
> + - g\ :sub:`7`
> + - g\ :sub:`6`
> +
> + - a\ :sub:`1`
> + - a\ :sub:`0`
> + - r\ :sub:`9`
> + - r\ :sub:`8`
> + - r\ :sub:`7`
> + - r\ :sub:`6`
> + - r\ :sub:`5`
> + - r\ :sub:`4`
> + -
> +
> +.. raw:: latex
> +
> + \endgroup
> +
> +
> Deprecated RGB Formats
> ======================
>
> diff --git a/drivers/media/v4l2-core/v4l2-ioctl.c b/drivers/media/v4l2-core/v4l2-ioctl.c
> index fddba75d9074..964300deaf62 100644
> --- a/drivers/media/v4l2-core/v4l2-ioctl.c
> +++ b/drivers/media/v4l2-core/v4l2-ioctl.c
> @@ -1304,6 +1304,9 @@ static void v4l_fill_fmtdesc(struct v4l2_fmtdesc *fmt)
> case V4L2_PIX_FMT_BGRX32: descr = "32-bit XBGR 8-8-8-8"; break;
> case V4L2_PIX_FMT_RGBA32: descr = "32-bit RGBA 8-8-8-8"; break;
> case V4L2_PIX_FMT_RGBX32: descr = "32-bit RGBX 8-8-8-8"; break;
> + case V4L2_PIX_FMT_XBGR2101010: descr = "32-bit XBGR 2-10-10-10"; break;
> + case V4L2_PIX_FMT_ABGR2101010: descr = "32-bit ABGR 2-10-10-10"; break;
> + case V4L2_PIX_FMT_BGRA1010102: descr = "32-bit BGRA 10-10-10-2"; break;
> case V4L2_PIX_FMT_GREY: descr = "8-bit Greyscale"; break;
> case V4L2_PIX_FMT_Y4: descr = "4-bit Greyscale"; break;
> case V4L2_PIX_FMT_Y6: descr = "6-bit Greyscale"; break;
> diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h
> index 29da1f4b4578..877fd61693b8 100644
> --- a/include/uapi/linux/videodev2.h
> +++ b/include/uapi/linux/videodev2.h
> @@ -576,6 +576,9 @@ struct v4l2_pix_format {
> #define V4L2_PIX_FMT_RGBX32 v4l2_fourcc('X', 'B', '2', '4') /* 32 RGBX-8-8-8-8 */
> #define V4L2_PIX_FMT_ARGB32 v4l2_fourcc('B', 'A', '2', '4') /* 32 ARGB-8-8-8-8 */
> #define V4L2_PIX_FMT_XRGB32 v4l2_fourcc('B', 'X', '2', '4') /* 32 XRGB-8-8-8-8 */
> +#define V4L2_PIX_FMT_XBGR2101010 v4l2_fourcc('R', 'X', '3', '0') /* 32 XBGR-2-10-10-10 */
> +#define V4L2_PIX_FMT_ABGR2101010 v4l2_fourcc('R', 'A', '3', '0') /* 32 ABGR-2-10-10-10 */
> +#define V4L2_PIX_FMT_BGRA1010102 v4l2_fourcc('A', 'R', '3', '0') /* 32 BGRA-10-10-10-2 */
>
> /* Grey formats */
> #define V4L2_PIX_FMT_GREY v4l2_fourcc('G', 'R', 'E', 'Y') /* 8 Greyscale */
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2022-12-19 19:11 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-19 14:01 [PATCH v2 0/7] media/drm: renesas: Add new pixel formats Tomi Valkeinen
2022-12-19 14:01 ` [PATCH v2 1/7] media: Add 2-10-10-10 RGB formats Tomi Valkeinen
2022-12-19 19:10 ` Laurent Pinchart [this message]
2022-12-19 19:10 ` Laurent Pinchart
2022-12-20 14:12 ` Tomi Valkeinen
2022-12-20 14:12 ` Tomi Valkeinen
2022-12-20 14:24 ` Laurent Pinchart
2022-12-20 14:24 ` Laurent Pinchart
2022-12-20 14:35 ` Tomi Valkeinen
2022-12-20 14:35 ` Tomi Valkeinen
2022-12-19 14:01 ` [PATCH v2 2/7] media: Add Y210, Y212 and Y216 formats Tomi Valkeinen
2022-12-19 20:54 ` Laurent Pinchart
2022-12-19 20:54 ` Laurent Pinchart
2022-12-19 14:01 ` [PATCH v2 3/7] media: renesas: vsp1: Change V3U to be gen4 Tomi Valkeinen
2022-12-19 21:01 ` Laurent Pinchart
2022-12-19 21:01 ` Laurent Pinchart
2022-12-21 7:48 ` Tomi Valkeinen
2022-12-21 7:48 ` Tomi Valkeinen
2022-12-21 10:21 ` Laurent Pinchart
2022-12-21 10:21 ` Laurent Pinchart
2022-12-19 14:01 ` [PATCH v2 4/7] media: renesas: vsp1: Add V4H SoC version Tomi Valkeinen
2022-12-19 21:06 ` Laurent Pinchart
2022-12-19 21:06 ` Laurent Pinchart
2022-12-19 14:01 ` [PATCH v2 5/7] media: renesas: vsp1: Add new formats (2-10-10-10 ARGB, Y210) Tomi Valkeinen
2022-12-19 21:37 ` Laurent Pinchart
2022-12-19 21:37 ` Laurent Pinchart
2022-12-19 14:01 ` [PATCH v2 6/7] drm: rcar-du: Bump V3U to gen 4 Tomi Valkeinen
2022-12-19 15:04 ` Kieran Bingham
2022-12-19 21:38 ` Laurent Pinchart
2022-12-19 21:38 ` Laurent Pinchart
2022-12-19 14:01 ` [PATCH v2 7/7] drm: rcar-du: Add new formats (2-10-10-10 ARGB, Y210) Tomi Valkeinen
2022-12-19 21:47 ` Laurent Pinchart
2022-12-19 21:47 ` Laurent Pinchart
2022-12-20 9:01 ` Hans Verkuil
2022-12-20 9:01 ` Hans Verkuil
2022-12-20 9:09 ` Geert Uytterhoeven
2022-12-20 9:09 ` Geert Uytterhoeven
2022-12-20 9:20 ` Hans Verkuil
2022-12-20 9:20 ` Hans Verkuil
2022-12-20 9:33 ` Geert Uytterhoeven
2022-12-20 9:33 ` Geert Uytterhoeven
2022-12-20 9:18 ` Laurent Pinchart
2022-12-20 9:18 ` Laurent Pinchart
2022-12-20 9:26 ` Hans Verkuil
2022-12-20 9:26 ` Hans Verkuil
2022-12-20 10:38 ` Laurent Pinchart
2022-12-20 10:38 ` Laurent Pinchart
2022-12-20 9:36 ` Sakari Ailus
2022-12-20 9:36 ` Sakari Ailus
2022-12-20 10:42 ` Laurent Pinchart
2022-12-20 10:42 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Y6C3PtnjAdv/seMy@pendragon.ideasonboard.com \
--to=laurent.pinchart@ideasonboard.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=geert@linux-m68k.org \
--cc=kieran.bingham@ideasonboard.com \
--cc=linux-media@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=nicolas@ndufresne.ca \
--cc=tomi.valkeinen+renesas@ideasonboard.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.