* [PATCH] Input: elo - fix an error code in elo_connect()
@ 2021-01-28 9:35 ` Dan Carpenter
0 siblings, 0 replies; 4+ messages in thread
From: Dan Carpenter @ 2021-01-28 9:35 UTC (permalink / raw)
To: Dmitry Torokhov
Cc: Gustavo A. R. Silva, Shaun Jackman, linux-input, kernel-janitors
If elo_setup_10() fails then this should return an error code instead
of success.
Fixes: fae3006e4b42 ("Input: elo - add support for non-pressure-sensitive touchscreens")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
---
drivers/input/touchscreen/elo.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/input/touchscreen/elo.c b/drivers/input/touchscreen/elo.c
index e0bacd34866a..4b2fb73da5e2 100644
--- a/drivers/input/touchscreen/elo.c
+++ b/drivers/input/touchscreen/elo.c
@@ -341,8 +341,10 @@ static int elo_connect(struct serio *serio, struct serio_driver *drv)
switch (elo->id) {
case 0: /* 10-byte protocol */
- if (elo_setup_10(elo))
+ if (elo_setup_10(elo)) {
+ err = -EINVAL;
goto fail3;
+ }
break;
--
2.29.2
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH] Input: elo - fix an error code in elo_connect()
@ 2021-01-28 9:35 ` Dan Carpenter
0 siblings, 0 replies; 4+ messages in thread
From: Dan Carpenter @ 2021-01-28 9:35 UTC (permalink / raw)
To: Dmitry Torokhov
Cc: Gustavo A. R. Silva, Shaun Jackman, linux-input, kernel-janitors
If elo_setup_10() fails then this should return an error code instead
of success.
Fixes: fae3006e4b42 ("Input: elo - add support for non-pressure-sensitive touchscreens")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
---
drivers/input/touchscreen/elo.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/input/touchscreen/elo.c b/drivers/input/touchscreen/elo.c
index e0bacd34866a..4b2fb73da5e2 100644
--- a/drivers/input/touchscreen/elo.c
+++ b/drivers/input/touchscreen/elo.c
@@ -341,8 +341,10 @@ static int elo_connect(struct serio *serio, struct serio_driver *drv)
switch (elo->id) {
case 0: /* 10-byte protocol */
- if (elo_setup_10(elo))
+ if (elo_setup_10(elo)) {
+ err = -EINVAL;
goto fail3;
+ }
break;
--
2.29.2
^ permalink raw reply related [flat|nested] 4+ messages in thread* Re: [PATCH] Input: elo - fix an error code in elo_connect()
2021-01-28 9:35 ` Dan Carpenter
(?)
@ 2021-02-17 4:37 ` Dmitry Torokhov
2021-02-17 8:24 ` Dan Carpenter
-1 siblings, 1 reply; 4+ messages in thread
From: Dmitry Torokhov @ 2021-02-17 4:37 UTC (permalink / raw)
To: Dan Carpenter
Cc: Gustavo A. R. Silva, Shaun Jackman, linux-input, kernel-janitors
Hi Dan,
On Thu, Jan 28, 2021 at 12:35:51PM +0300, Dan Carpenter wrote:
> If elo_setup_10() fails then this should return an error code instead
> of success.
Thank you for the patch.
>
> Fixes: fae3006e4b42 ("Input: elo - add support for non-pressure-sensitive touchscreens")
> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
> ---
> drivers/input/touchscreen/elo.c | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/input/touchscreen/elo.c b/drivers/input/touchscreen/elo.c
> index e0bacd34866a..4b2fb73da5e2 100644
> --- a/drivers/input/touchscreen/elo.c
> +++ b/drivers/input/touchscreen/elo.c
> @@ -341,8 +341,10 @@ static int elo_connect(struct serio *serio, struct serio_driver *drv)
> switch (elo->id) {
>
> case 0: /* 10-byte protocol */
> - if (elo_setup_10(elo))
> + if (elo_setup_10(elo)) {
> + err = -EINVAL;
Ideally we'd propagate error from elo_setup_10() and underlying code,
but we are not ready for it, as most serio code simply uses -1 for
errors. However I think that -EIO would suit better here. Please let me
know if you disagree, otherwise I'll fix it up on my side.
Thanks!
> goto fail3;
> + }
>
> break;
>
> --
> 2.29.2
>
--
Dmitry
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH] Input: elo - fix an error code in elo_connect()
2021-02-17 4:37 ` Dmitry Torokhov
@ 2021-02-17 8:24 ` Dan Carpenter
0 siblings, 0 replies; 4+ messages in thread
From: Dan Carpenter @ 2021-02-17 8:24 UTC (permalink / raw)
To: Dmitry Torokhov
Cc: Gustavo A. R. Silva, Shaun Jackman, linux-input, kernel-janitors
On Tue, Feb 16, 2021 at 08:37:31PM -0800, Dmitry Torokhov wrote:
> Hi Dan,
>
> On Thu, Jan 28, 2021 at 12:35:51PM +0300, Dan Carpenter wrote:
> > If elo_setup_10() fails then this should return an error code instead
> > of success.
>
> Thank you for the patch.
>
> >
> > Fixes: fae3006e4b42 ("Input: elo - add support for non-pressure-sensitive touchscreens")
> > Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
> > ---
> > drivers/input/touchscreen/elo.c | 4 +++-
> > 1 file changed, 3 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/input/touchscreen/elo.c b/drivers/input/touchscreen/elo.c
> > index e0bacd34866a..4b2fb73da5e2 100644
> > --- a/drivers/input/touchscreen/elo.c
> > +++ b/drivers/input/touchscreen/elo.c
> > @@ -341,8 +341,10 @@ static int elo_connect(struct serio *serio, struct serio_driver *drv)
> > switch (elo->id) {
> >
> > case 0: /* 10-byte protocol */
> > - if (elo_setup_10(elo))
> > + if (elo_setup_10(elo)) {
> > + err = -EINVAL;
>
> Ideally we'd propagate error from elo_setup_10() and underlying code,
> but we are not ready for it, as most serio code simply uses -1 for
> errors. However I think that -EIO would suit better here. Please let me
> know if you disagree, otherwise I'll fix it up on my side.
>
-EIO is fine. Thanks!
regards,
dan carpenter
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2021-02-17 8:25 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-01-28 9:35 [PATCH] Input: elo - fix an error code in elo_connect() Dan Carpenter
2021-01-28 9:35 ` Dan Carpenter
2021-02-17 4:37 ` Dmitry Torokhov
2021-02-17 8:24 ` Dan Carpenter
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.