CI build for yosemitev2

CI build for yosemitev2

[Velumani T-ERS,HCLTech]

Classification: Public

Hi Andrew Geissler,

We have ported many features of openbmc to facebook/yosemitev2 machine and the build is verified from the openbmc/master working fine. Could you please help us to add the Yosemitev2 machine in the CI build verification. This will help us to ensure there are no build break during new patch push.

Regards,
Velu

::DISCLAIMER::
________________________________
The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents (with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates. Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of authorized representative of HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. Before opening any email and/or attachments, please check them for viruses and other defects.
________________________________

Re: CI build for yosemitev2

[Andrew Geissler]

[-- Attachment #1: Type: text/plain, Size: 1569 bytes --]



> On Dec 21, 2020, at 9:32 AM, Velumani T-ERS,HCLTech <velumanit@hcl.com> wrote:
> 
> Classification: Public
> 
> Hi Andrew Geissler,
> 
> We have ported many features of openbmc to facebook/yosemitev2 machine and the build is verified from the openbmc/master working fine. Could you please help us to add the Yosemitev2 machine in the CI build verification. This will help us to ensure there are no build break during new patch push.

Hi Velumani, glad to see a new system added to openbmc!

Getting a new system into CI doesn’t have the most defined process but
I think in general it has to fall under one of these due to our constraints
in compute power for CI[1]:

1) Propose an existing system in CI to replace (and the benefits of that)
2) Donate a jenkins compute node to openbmc CI
3) Convince the community that your system provides additional meta-*
    layer coverage (or some other critical benefit) that would be worth
    the additional hit to the existing CI infrastructure.

You could also look into hosting your own jenkins which builds
and scores the gerrit reviews. See this wiki for more info:
https://github.com/openbmc/openbmc/wiki/Adding-a-System-to-Hardware-Continuous-Integration <https://github.com/openbmc/openbmc/wiki/Adding-a-System-to-Hardware-Continuous-Integration> 

[1]: https://github.com/openbmc/openbmc/wiki/OpenBMC-Infrastructure-Workgroup#current-infrastructure <https://github.com/openbmc/openbmc/wiki/OpenBMC-Infrastructure-Workgroup#current-infrastructure> 

Andrew

> 
> Regards,
> Velu


[-- Attachment #2: Type: text/html, Size: 2510 bytes --]

RE: CI build for yosemitev2

[Velumani T-ERS,HCLTech]

[-- Attachment #1: Type: text/plain, Size: 4263 bytes --]

Classification: Public
Hi Andrew,

Thanks for your response. I am working on the hardware CI for yosemitev2 and will keep you posted.

Can we enable build failure gating for yosemitev2 (not hardware CI) in the current system. Sometimes the new gerrit merges may cause build breaks to the YosemiteV2 machine.

Regards,
Velu

From: Andrew Geissler <geissonator@gmail.com>
Sent: Monday, January 4, 2021 6:57 AM
To: Velumani T-ERS,HCLTech <velumanit@hcl.com>
Cc: openbmc@lists.ozlabs.org; Patrick Williams <patrickw3@fb.com>; Sai Dasari <sdasari@fb.com>; bradleyb@fuzziesquirrel.com
Subject: Re: CI build for yosemitev2

[CAUTION: This Email is from outside the Organization. Unless you trust the sender, Don't click links or open attachments as it may be a Phishing email, which can steal your Information and compromise your Computer.]



On Dec 21, 2020, at 9:32 AM, Velumani T-ERS,HCLTech <velumanit@hcl.com<mailto:velumanit@hcl.com>> wrote:

Classification: Public

Hi Andrew Geissler,

We have ported many features of openbmc to facebook/yosemitev2 machine and the build is verified from the openbmc/master working fine. Could you please help us to add the Yosemitev2 machine in the CI build verification. This will help us to ensure there are no build break during new patch push.

Hi Velumani, glad to see a new system added to openbmc!

Getting a new system into CI doesn't have the most defined process but
I think in general it has to fall under one of these due to our constraints
in compute power for CI[1]:

1) Propose an existing system in CI to replace (and the benefits of that)
2) Donate a jenkins compute node to openbmc CI
3) Convince the community that your system provides additional meta-*
    layer coverage (or some other critical benefit) that would be worth
    the additional hit to the existing CI infrastructure.

You could also look into hosting your own jenkins which builds
and scores the gerrit reviews. See this wiki for more info:
https://github.com/openbmc/openbmc/wiki/Adding-a-System-to-Hardware-Continuous-Integration<https://apc01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fopenbmc%2Fopenbmc%2Fwiki%2FAdding-a-System-to-Hardware-Continuous-Integration&data=04%7C01%7Cvelumanit%40hcl.com%7C7fe9662c2ab64877f21808d8b04fdbbd%7C189de737c93a4f5a8b686f4ca9941912%7C0%7C0%7C637453204330453150%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=%2Fv6lgngN6gN6YNCpwwlP9UE0U3YcXj6Q1t7KpYnY08M%3D&reserved=0>

[1]: https://github.com/openbmc/openbmc/wiki/OpenBMC-Infrastructure-Workgroup#current-infrastructure<https://apc01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fopenbmc%2Fopenbmc%2Fwiki%2FOpenBMC-Infrastructure-Workgroup%23current-infrastructure&data=04%7C01%7Cvelumanit%40hcl.com%7C7fe9662c2ab64877f21808d8b04fdbbd%7C189de737c93a4f5a8b686f4ca9941912%7C0%7C0%7C637453204330453150%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=5xLzvnySyLNyGZzb1Ws1BvC0RzYF1QidXZLRngxzGys%3D&reserved=0>

Andrew



Regards,
Velu

::DISCLAIMER::
________________________________
The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents (with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates. Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of authorized representative of HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. Before opening any email and/or attachments, please check them for viruses and other defects.
________________________________

[-- Attachment #2: Type: text/html, Size: 10004 bytes --]

Re: [External] RE: CI build for yosemitev2

[Lei Yu]

On Tue, Jan 12, 2021 at 1:10 PM Velumani T-ERS,HCLTech
<velumanit@hcl.com> wrote:
>
> Classification: Public
>
> Hi Andrew,
>
>
>
> Thanks for your response. I am working on the hardware CI for yosemitev2 and will keep you posted.
>
>
>
> Can we enable build failure gating for yosemitev2 (not hardware CI) in the current system. Sometimes the new gerrit merges may cause build breaks to the YosemiteV2 machine.

We have set up an internal CI on meta-bytedance/meta-g220a build for
commits into meta-bytedance. The job could send "Verified +1/-1"
depends on the build result.
Technically, it could send this information to meta-phosphor as well
if you enable such CI and if you have permission.
But most likely we do not have permission to send the "Verified"
result into meta-phosphor, so instead, you could post a "Code-Review
-1" on a failure build, and post the failure log manually.


-- 
BRs,
Lei YU

Re: CI build for yosemitev2

[Patrick Williams]

[-- Attachment #1: Type: text/plain, Size: 771 bytes --]

On Sun, Jan 03, 2021 at 07:27:06PM -0600, Andrew Geissler wrote:
> 
> 
> > On Dec 21, 2020, at 9:32 AM, Velumani T-ERS,HCLTech <velumanit@hcl.com> wrote:
> > 
> > Could you please help us to add the Yosemitev2 machine in the CI build verification. 
> 
> Hi Velumani, glad to see a new system added to openbmc!
> 
> Getting a new system into CI doesn’t have the most defined process but
> I think in general it has to fall under one of these due to our constraints
> in compute power for CI[1]:
> 
> 2) Donate a jenkins compute node to openbmc CI

Facebook will allocate a few compute nodes to the Jenkins pool.  Andrew,
I'll work with you to get them online and integrated with Jenkins.  Once
that is done, we can enable Yv2?

-- 
Patrick Williams

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: CI build for yosemitev2

[Andrew Geissler]

> On Jan 15, 2021, at 7:26 AM, Patrick Williams <patrick@stwcx.xyz> wrote:
> 
> On Sun, Jan 03, 2021 at 07:27:06PM -0600, Andrew Geissler wrote:
>> 
>> 
>>> On Dec 21, 2020, at 9:32 AM, Velumani T-ERS,HCLTech <velumanit@hcl.com> wrote:
>>> 
>>> Could you please help us to add the Yosemitev2 machine in the CI build verification. 
>> 
>> Hi Velumani, glad to see a new system added to openbmc!
>> 
>> Getting a new system into CI doesn’t have the most defined process but
>> I think in general it has to fall under one of these due to our constraints
>> in compute power for CI[1]:
>> 
>> 2) Donate a jenkins compute node to openbmc CI
> 
> Facebook will allocate a few compute nodes to the Jenkins pool.  Andrew,
> I'll work with you to get them online and integrated with Jenkins.  Once
> that is done, we can enable Yv2?

Nice! Sounds good to me.

> 
> -- 
> Patrick Williams

Re: CI build for yosemitev2

[Patrick Williams]

[-- Attachment #1: Type: text/plain, Size: 775 bytes --]

On Fri, Jan 15, 2021 at 07:26:13AM -0600, Patrick Williams wrote:
> On Sun, Jan 03, 2021 at 07:27:06PM -0600, Andrew Geissler wrote:
> > > On Dec 21, 2020, at 9:32 AM, Velumani T-ERS,HCLTech <velumanit@hcl.com> wrote:
> > > Could you please help us to add the Yosemitev2 machine in the CI build verification. 
>
> > 2) Donate a jenkins compute node to openbmc CI
> 
> Facebook will allocate a few compute nodes to the Jenkins pool.  Andrew,
> I'll work with you to get them online and integrated with Jenkins.  Once
> that is done, we can enable Yv2?

I wanted to follow up and let everyone know that this work effort is
done and Yv2 is now enabled in CI.  Facebook is currently contributing 4
pretty fast machines to the Jenkins pool.

-- 
Patrick Williams

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

RE: CI build for yosemitev2

[Velumani T-ERS,HCLTech]

Classification: Public

Thanks Patrick for the update and enabling CI for yv2.

Regards,
Velu

-----Original Message-----
From: Patrick Williams <patrick@stwcx.xyz>
Sent: Friday, April 23, 2021 6:51 PM
To: Andrew Geissler <geissonator@gmail.com>
Cc: openbmc@lists.ozlabs.org; bradleyb@fuzziesquirrel.com; Velumani T-ERS,HCLTech <velumanit@hcl.com>; Patrick Williams <patrickw3@fb.com>
Subject: Re: CI build for yosemitev2

On Fri, Jan 15, 2021 at 07:26:13AM -0600, Patrick Williams wrote:
> On Sun, Jan 03, 2021 at 07:27:06PM -0600, Andrew Geissler wrote:
> > > On Dec 21, 2020, at 9:32 AM, Velumani T-ERS,HCLTech <velumanit@hcl.com> wrote:
> > > Could you please help us to add the Yosemitev2 machine in the CI build verification.
>
> > 2) Donate a jenkins compute node to openbmc CI
>
> Facebook will allocate a few compute nodes to the Jenkins pool.
> Andrew, I'll work with you to get them online and integrated with
> Jenkins.  Once that is done, we can enable Yv2?

I wanted to follow up and let everyone know that this work effort is done and Yv2 is now enabled in CI.  Facebook is currently contributing 4 pretty fast machines to the Jenkins pool.

--
Patrick Williams
::DISCLAIMER::
________________________________
The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents (with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates. Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of authorized representative of HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. Before opening any email and/or attachments, please check them for viruses and other defects.
________________________________