Re: [RFC PATCH 2/6] drm: Add skeleton for EPDC driver

From: "Jonathan Neuschäfer" <j.neuschaefer@gmx.net>
To: Andreas Kemnade <andreas@kemnade.info>
Cc: p.zabel@pengutronix.de, airlied@linux.ie, daniel@ffwll.ch,
	robh+dt@kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de,
	kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com,
	maarten.lankhorst@linux.intel.com, mripard@kernel.org,
	tzimmermann@suse.de, dri-devel@lists.freedesktop.org,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, alistair@alistair23.me,
	samuel@sholland.org, josua.mayer@jm0.eu,
	letux-kernel@openphoenux.org
Subject: Re: [RFC PATCH 2/6] drm: Add skeleton for EPDC driver
Date: Sat, 12 Mar 2022 20:41:59 +0100	[thread overview]
Message-ID: <Yiz3h0GYcyD/hgX3@latitude> (raw)
In-Reply-To: <20220206080016.796556-3-andreas@kemnade.info>

[-- Attachment #1: Type: text/plain, Size: 2066 bytes --]

On Sun, Feb 06, 2022 at 09:00:12AM +0100, Andreas Kemnade wrote:
> This driver is for the EPD controller in the i.MX SoCs. Add a skeleton
> and basic things for the driver
> 
> Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
> ---
>  drivers/gpu/drm/Kconfig                 |   2 +
>  drivers/gpu/drm/Makefile                |   1 +
>  drivers/gpu/drm/mxc-epdc/Kconfig        |  15 +
>  drivers/gpu/drm/mxc-epdc/Makefile       |   5 +
>  drivers/gpu/drm/mxc-epdc/epdc_regs.h    | 442 ++++++++++++++++++++++++
>  drivers/gpu/drm/mxc-epdc/mxc_epdc.h     |  20 ++
>  drivers/gpu/drm/mxc-epdc/mxc_epdc_drv.c | 248 +++++++++++++
>  7 files changed, 733 insertions(+)
>  create mode 100644 drivers/gpu/drm/mxc-epdc/Kconfig
>  create mode 100644 drivers/gpu/drm/mxc-epdc/Makefile
>  create mode 100644 drivers/gpu/drm/mxc-epdc/epdc_regs.h
>  create mode 100644 drivers/gpu/drm/mxc-epdc/mxc_epdc.h
>  create mode 100644 drivers/gpu/drm/mxc-epdc/mxc_epdc_drv.c
> 
> diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
> index b1f22e457fd0..6b6b44ff7556 100644
> --- a/drivers/gpu/drm/Kconfig
> +++ b/drivers/gpu/drm/Kconfig
> @@ -390,6 +390,8 @@ source "drivers/gpu/drm/gud/Kconfig"
>  
>  source "drivers/gpu/drm/sprd/Kconfig"
>  
> +source "drivers/gpu/drm/mxc-epdc/Kconfig"

I'd put it under gpu/drm/imx/epdc, perhaps.

> +int mxc_epdc_output(struct drm_device *drm)
> +{
> +	struct mxc_epdc *priv = to_mxc_epdc(drm);
> +	int ret;
> +
> +	priv->connector.dpms = DRM_MODE_DPMS_OFF;
> +	priv->connector.polled = 0;
> +	drm_connector_helper_add(&priv->connector,
> +				 &mxc_epdc_connector_helper_funcs);
> +	ret = drm_connector_init(drm, &priv->connector,
> +				 &mxc_epdc_connector_funcs,
> +				 DRM_MODE_CONNECTOR_Unknown);
> +	if (ret)
> +		return ret;
> +	ret = of_get_display_timing(drm->dev->of_node, "timing", &priv->timing);
> +	if (ret)
> +		return ret;
> +
> +	return 0;

Possible to simplify to:

	return of_get_display_timing(drm->dev->of_node, "timing", &priv->timing);

Jonathan

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]