From: William McVicker <willmcvicker@google.com> To: Peter Griffin <peter.griffin@linaro.org> Cc: robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, mturquette@baylibre.com, conor+dt@kernel.org, sboyd@kernel.org, tomasz.figa@gmail.com, s.nawrocki@samsung.com, linus.walleij@linaro.org, wim@linux-watchdog.org, linux@roeck-us.net, catalin.marinas@arm.com, will@kernel.org, arnd@arndb.de, olof@lixom.net, gregkh@linuxfoundation.org, jirislaby@kernel.org, cw00.choi@samsung.com, alim.akhtar@samsung.com, tudor.ambarus@linaro.org, andre.draszik@linaro.org, semen.protsenko@linaro.org, saravanak@google.com, soc@kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-samsung-soc@vger.kernel.org, linux-clk@vger.kernel.org, linux-gpio@vger.kernel.org, linux-watchdog@vger.kernel.org, kernel-team@android.com, linux-serial@vger.kernel.org Subject: Re: [PATCH v5 19/20] arm64: dts: exynos: google: Add initial Oriole/pixel 6 board support Date: Fri, 1 Dec 2023 16:03:37 -0800 [thread overview] Message-ID: <ZWp0WapGiXZLn5xn@google.com> (raw) In-Reply-To: <20231201160925.3136868-20-peter.griffin@linaro.org> On 12/01/2023, Peter Griffin wrote: > Add initial board support for the Pixel 6 phone code named Oriole. This > has been tested with a minimal busybox initramfs and boots to a shell. > > Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Tested-by: Will McVicker <willmcvicker@google.com> -- Verified boot to a busybox console on my oriole device. Thanks, Will > --- > arch/arm64/boot/dts/exynos/Makefile | 2 + > arch/arm64/boot/dts/exynos/google/Makefile | 4 + > .../boot/dts/exynos/google/gs101-oriole.dts | 105 ++++++++++++++++++ > 3 files changed, 111 insertions(+) > create mode 100644 arch/arm64/boot/dts/exynos/google/Makefile > create mode 100644 arch/arm64/boot/dts/exynos/google/gs101-oriole.dts > > diff --git a/arch/arm64/boot/dts/exynos/Makefile b/arch/arm64/boot/dts/exynos/Makefile > index 6e4ba69268e5..44c24a8ad9e1 100644 > --- a/arch/arm64/boot/dts/exynos/Makefile > +++ b/arch/arm64/boot/dts/exynos/Makefile > @@ -1,4 +1,6 @@ > # SPDX-License-Identifier: GPL-2.0 > +subdir-y += google > + > dtb-$(CONFIG_ARCH_EXYNOS) += \ > exynos5433-tm2.dtb \ > exynos5433-tm2e.dtb \ > diff --git a/arch/arm64/boot/dts/exynos/google/Makefile b/arch/arm64/boot/dts/exynos/google/Makefile > new file mode 100644 > index 000000000000..0a6d5e1fe4ee > --- /dev/null > +++ b/arch/arm64/boot/dts/exynos/google/Makefile > @@ -0,0 +1,4 @@ > +# SPDX-License-Identifier: GPL-2.0 > + > +dtb-$(CONFIG_ARCH_EXYNOS) += \ > + gs101-oriole.dtb \ > diff --git a/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts b/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts > new file mode 100644 > index 000000000000..6abd00fa337e > --- /dev/null > +++ b/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts > @@ -0,0 +1,105 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Oriole Device Tree > + * > + * Copyright 2021-2023 Google,LLC > + * Copyright 2023 Linaro Ltd - <peter.griffin@linaro.org> > + */ > + > +/dts-v1/; > + > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/input/input.h> > +#include "gs101-pinctrl.h" > +#include "gs101.dtsi" > + > +/ { > + model = "Oriole"; > + compatible = "google,gs101-oriole", "google,gs101"; > + > + aliases { > + serial0 = &serial_0; > + }; > + > + chosen { > + /* Bootloader expects bootargs specified otherwise it crashes */ > + bootargs = ""; > + stdout-path = &serial_0; > + }; > + > + gpio-keys { > + compatible = "gpio-keys"; > + pinctrl-names = "default"; > + pinctrl-0 = <&key_voldown>, <&key_volup>, <&key_power>; > + > + button-vol-down { > + label = "KEY_VOLUMEDOWN"; > + linux,code = <KEY_VOLUMEDOWN>; > + gpios = <&gpa7 3 GPIO_ACTIVE_LOW>; > + wakeup-source; > + }; > + > + button-vol-up { > + label = "KEY_VOLUMEUP"; > + linux,code = <KEY_VOLUMEUP>; > + gpios = <&gpa8 1 GPIO_ACTIVE_LOW>; > + wakeup-source; > + }; > + > + button-power { > + label = "KEY_POWER"; > + linux,code = <KEY_POWER>; > + gpios = <&gpa10 1 GPIO_ACTIVE_LOW>; > + wakeup-source; > + }; > + }; > +}; > + > +&ext_24_5m { > + clock-frequency = <24576000>; > +}; > + > +&ext_200m { > + clock-frequency = <200000000>; > +}; > + > +&pinctrl_far_alive { > + key_voldown: key-voldown-pins { > + samsung,pins = "gpa7-3"; > + samsung,pin-function = <GS101_PIN_FUNC_EINT>; > + samsung,pin-pud = <GS101_PIN_PULL_NONE>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + key_volup: key-volup-pins { > + samsung,pins = "gpa8-1"; > + samsung,pin-function = <GS101_PIN_FUNC_EINT>; > + samsung,pin-pud = <GS101_PIN_PULL_NONE>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > +}; > + > +&pinctrl_gpio_alive { > + key_power: key-power-pins { > + samsung,pins = "gpa10-1"; > + samsung,pin-function = <GS101_PIN_FUNC_EINT>; > + samsung,pin-pud = <GS101_PIN_PULL_NONE>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > +}; > + > +&serial_0 { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&uart0_bus>; > +}; > + > +&usi_uart { > + status = "okay"; > + samsung,clkreq-on; /* needed for UART mode */ > +}; > + > +&watchdog_cl0 { > + timeout-sec = <30>; > + status = "okay"; > +}; > -- > 2.43.0.rc2.451.g8631bc7472-goog >
WARNING: multiple messages have this Message-ID (diff)
From: William McVicker <willmcvicker@google.com> To: Peter Griffin <peter.griffin@linaro.org> Cc: robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, mturquette@baylibre.com, conor+dt@kernel.org, sboyd@kernel.org, tomasz.figa@gmail.com, s.nawrocki@samsung.com, linus.walleij@linaro.org, wim@linux-watchdog.org, linux@roeck-us.net, catalin.marinas@arm.com, will@kernel.org, arnd@arndb.de, olof@lixom.net, gregkh@linuxfoundation.org, jirislaby@kernel.org, cw00.choi@samsung.com, alim.akhtar@samsung.com, tudor.ambarus@linaro.org, andre.draszik@linaro.org, semen.protsenko@linaro.org, saravanak@google.com, soc@kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-samsung-soc@vger.kernel.org, linux-clk@vger.kernel.org, linux-gpio@vger.kernel.org, linux-watchdog@vger.kernel.org, kernel-team@android.com, linux-serial@vger.kernel.org Subject: Re: [PATCH v5 19/20] arm64: dts: exynos: google: Add initial Oriole/pixel 6 board support Date: Fri, 1 Dec 2023 16:03:37 -0800 [thread overview] Message-ID: <ZWp0WapGiXZLn5xn@google.com> (raw) In-Reply-To: <20231201160925.3136868-20-peter.griffin@linaro.org> On 12/01/2023, Peter Griffin wrote: > Add initial board support for the Pixel 6 phone code named Oriole. This > has been tested with a minimal busybox initramfs and boots to a shell. > > Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Tested-by: Will McVicker <willmcvicker@google.com> -- Verified boot to a busybox console on my oriole device. Thanks, Will > --- > arch/arm64/boot/dts/exynos/Makefile | 2 + > arch/arm64/boot/dts/exynos/google/Makefile | 4 + > .../boot/dts/exynos/google/gs101-oriole.dts | 105 ++++++++++++++++++ > 3 files changed, 111 insertions(+) > create mode 100644 arch/arm64/boot/dts/exynos/google/Makefile > create mode 100644 arch/arm64/boot/dts/exynos/google/gs101-oriole.dts > > diff --git a/arch/arm64/boot/dts/exynos/Makefile b/arch/arm64/boot/dts/exynos/Makefile > index 6e4ba69268e5..44c24a8ad9e1 100644 > --- a/arch/arm64/boot/dts/exynos/Makefile > +++ b/arch/arm64/boot/dts/exynos/Makefile > @@ -1,4 +1,6 @@ > # SPDX-License-Identifier: GPL-2.0 > +subdir-y += google > + > dtb-$(CONFIG_ARCH_EXYNOS) += \ > exynos5433-tm2.dtb \ > exynos5433-tm2e.dtb \ > diff --git a/arch/arm64/boot/dts/exynos/google/Makefile b/arch/arm64/boot/dts/exynos/google/Makefile > new file mode 100644 > index 000000000000..0a6d5e1fe4ee > --- /dev/null > +++ b/arch/arm64/boot/dts/exynos/google/Makefile > @@ -0,0 +1,4 @@ > +# SPDX-License-Identifier: GPL-2.0 > + > +dtb-$(CONFIG_ARCH_EXYNOS) += \ > + gs101-oriole.dtb \ > diff --git a/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts b/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts > new file mode 100644 > index 000000000000..6abd00fa337e > --- /dev/null > +++ b/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts > @@ -0,0 +1,105 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Oriole Device Tree > + * > + * Copyright 2021-2023 Google,LLC > + * Copyright 2023 Linaro Ltd - <peter.griffin@linaro.org> > + */ > + > +/dts-v1/; > + > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/input/input.h> > +#include "gs101-pinctrl.h" > +#include "gs101.dtsi" > + > +/ { > + model = "Oriole"; > + compatible = "google,gs101-oriole", "google,gs101"; > + > + aliases { > + serial0 = &serial_0; > + }; > + > + chosen { > + /* Bootloader expects bootargs specified otherwise it crashes */ > + bootargs = ""; > + stdout-path = &serial_0; > + }; > + > + gpio-keys { > + compatible = "gpio-keys"; > + pinctrl-names = "default"; > + pinctrl-0 = <&key_voldown>, <&key_volup>, <&key_power>; > + > + button-vol-down { > + label = "KEY_VOLUMEDOWN"; > + linux,code = <KEY_VOLUMEDOWN>; > + gpios = <&gpa7 3 GPIO_ACTIVE_LOW>; > + wakeup-source; > + }; > + > + button-vol-up { > + label = "KEY_VOLUMEUP"; > + linux,code = <KEY_VOLUMEUP>; > + gpios = <&gpa8 1 GPIO_ACTIVE_LOW>; > + wakeup-source; > + }; > + > + button-power { > + label = "KEY_POWER"; > + linux,code = <KEY_POWER>; > + gpios = <&gpa10 1 GPIO_ACTIVE_LOW>; > + wakeup-source; > + }; > + }; > +}; > + > +&ext_24_5m { > + clock-frequency = <24576000>; > +}; > + > +&ext_200m { > + clock-frequency = <200000000>; > +}; > + > +&pinctrl_far_alive { > + key_voldown: key-voldown-pins { > + samsung,pins = "gpa7-3"; > + samsung,pin-function = <GS101_PIN_FUNC_EINT>; > + samsung,pin-pud = <GS101_PIN_PULL_NONE>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + key_volup: key-volup-pins { > + samsung,pins = "gpa8-1"; > + samsung,pin-function = <GS101_PIN_FUNC_EINT>; > + samsung,pin-pud = <GS101_PIN_PULL_NONE>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > +}; > + > +&pinctrl_gpio_alive { > + key_power: key-power-pins { > + samsung,pins = "gpa10-1"; > + samsung,pin-function = <GS101_PIN_FUNC_EINT>; > + samsung,pin-pud = <GS101_PIN_PULL_NONE>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > +}; > + > +&serial_0 { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&uart0_bus>; > +}; > + > +&usi_uart { > + status = "okay"; > + samsung,clkreq-on; /* needed for UART mode */ > +}; > + > +&watchdog_cl0 { > + timeout-sec = <30>; > + status = "okay"; > +}; > -- > 2.43.0.rc2.451.g8631bc7472-goog > _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-12-02 0:03 UTC|newest] Thread overview: 150+ messages / expand[flat|nested] mbox.gz Atom feed top 2023-12-01 16:09 [PATCH v5 00/20] Add minimal Tensor/GS101 SoC support and Oriole/Pixel6 board Peter Griffin 2023-12-01 16:09 ` Peter Griffin 2023-12-01 16:09 ` [PATCH v5 01/20] dt-bindings: soc: samsung: exynos-pmu: Add gs101 compatible Peter Griffin 2023-12-01 16:09 ` Peter Griffin 2023-12-01 16:09 ` [PATCH v5 02/20] dt-bindings: clock: Add Google gs101 clock management unit bindings Peter Griffin 2023-12-01 16:09 ` Peter Griffin 2023-12-01 20:11 ` Sam Protsenko 2023-12-01 20:11 ` Sam Protsenko 2023-12-03 20:59 ` Peter Griffin 2023-12-03 20:59 ` Peter Griffin 2023-12-06 12:30 ` André Draszik 2023-12-06 12:30 ` André Draszik 2023-12-09 0:10 ` Peter Griffin 2023-12-09 0:10 ` Peter Griffin 2023-12-01 16:09 ` [PATCH v5 03/20] dt-bindings: soc: google: exynos-sysreg: add dedicated SYSREG compatibles to GS101 Peter Griffin 2023-12-01 16:09 ` Peter Griffin 2023-12-01 16:09 ` [PATCH v5 04/20] dt-bindings: watchdog: Document Google gs101 watchdog bindings Peter Griffin 2023-12-01 16:09 ` Peter Griffin 2023-12-01 20:13 ` Sam Protsenko 2023-12-01 20:13 ` Sam Protsenko 2023-12-01 16:09 ` [PATCH v5 05/20] dt-bindings: arm: google: Add bindings for Google ARM platforms Peter Griffin 2023-12-01 16:09 ` Peter Griffin 2023-12-01 20:22 ` Sam Protsenko 2023-12-01 20:22 ` Sam Protsenko 2023-12-03 21:13 ` Peter Griffin 2023-12-03 21:13 ` Peter Griffin 2023-12-01 16:09 ` [PATCH v5 06/20] dt-bindings: pinctrl: samsung: add google,gs101-pinctrl compatible Peter Griffin 2023-12-01 16:09 ` Peter Griffin 2023-12-01 16:09 ` [PATCH v5 07/20] dt-bindings: pinctrl: samsung: add gs101-wakeup-eint compatible Peter Griffin 2023-12-01 16:09 ` Peter Griffin 2023-12-01 20:25 ` Sam Protsenko 2023-12-01 20:25 ` Sam Protsenko 2023-12-03 15:11 ` Krzysztof Kozlowski 2023-12-03 15:11 ` Krzysztof Kozlowski 2023-12-03 21:21 ` Peter Griffin 2023-12-03 21:21 ` Peter Griffin 2023-12-01 16:09 ` [PATCH v5 08/20] dt-bindings: serial: samsung: Add google-gs101-uart compatible Peter Griffin 2023-12-01 16:09 ` Peter Griffin 2023-12-01 16:09 ` [PATCH v5 09/20] dt-bindings: serial: samsung: Make samsung,uart-fifosize required property Peter Griffin 2023-12-01 16:09 ` Peter Griffin 2023-12-01 16:39 ` Arnd Bergmann 2023-12-01 16:39 ` Arnd Bergmann 2023-12-03 21:31 ` Peter Griffin 2023-12-03 21:31 ` Peter Griffin 2023-12-11 18:26 ` Rob Herring 2023-12-11 18:26 ` Rob Herring 2023-12-03 15:10 ` Krzysztof Kozlowski 2023-12-03 15:10 ` Krzysztof Kozlowski 2023-12-03 21:39 ` Peter Griffin 2023-12-03 21:39 ` Peter Griffin 2023-12-01 16:09 ` [PATCH v5 10/20] dt-bindings: soc: samsung: usi: add google,gs101-usi compatible Peter Griffin 2023-12-01 16:09 ` Peter Griffin 2023-12-01 20:39 ` Sam Protsenko 2023-12-01 20:39 ` Sam Protsenko 2023-12-03 15:09 ` Krzysztof Kozlowski 2023-12-03 15:09 ` Krzysztof Kozlowski 2023-12-03 21:47 ` Peter Griffin 2023-12-03 21:47 ` Peter Griffin 2023-12-01 16:09 ` [PATCH v5 11/20] clk: samsung: clk-pll: Add support for pll_{0516,0517,518} Peter Griffin 2023-12-01 16:09 ` Peter Griffin 2023-12-01 16:09 ` [PATCH v5 12/20] clk: samsung: clk-gs101: Add cmu_top, cmu_misc and cmu_apm support Peter Griffin 2023-12-01 22:40 ` Sam Protsenko 2023-12-05 8:09 ` André Draszik 2023-12-05 8:09 ` André Draszik 2023-12-08 11:35 ` Peter Griffin 2023-12-08 11:35 ` Peter Griffin 2023-12-04 17:51 ` André Draszik 2023-12-04 17:51 ` André Draszik 2023-12-08 14:27 ` Peter Griffin 2023-12-08 14:27 ` Peter Griffin 2023-12-05 7:52 ` André Draszik 2023-12-05 7:52 ` André Draszik 2023-12-08 21:14 ` Peter Griffin 2023-12-08 21:14 ` Peter Griffin 2023-12-01 16:09 ` [PATCH v5 13/20] pinctrl: samsung: Add filter selection support for alive banks Peter Griffin 2023-12-01 16:09 ` Peter Griffin 2023-12-01 23:55 ` William McVicker 2023-12-01 23:55 ` William McVicker 2023-12-05 19:51 ` Peter Griffin 2023-12-05 19:51 ` Peter Griffin 2023-12-02 0:22 ` Sam Protsenko 2023-12-02 0:22 ` Sam Protsenko 2023-12-05 11:34 ` Peter Griffin 2023-12-05 11:34 ` Peter Griffin 2023-12-05 19:10 ` Peter Griffin 2023-12-05 19:10 ` Peter Griffin 2023-12-01 16:09 ` [PATCH v5 14/20] pinctrl: samsung: Add gs101 SoC pinctrl configuration Peter Griffin 2023-12-01 16:09 ` Peter Griffin 2023-12-01 23:57 ` William McVicker 2023-12-01 23:57 ` William McVicker 2023-12-02 0:40 ` Sam Protsenko 2023-12-02 0:40 ` Sam Protsenko 2023-12-02 1:36 ` Alim Akhtar 2023-12-02 1:36 ` Alim Akhtar 2023-12-02 1:58 ` Sam Protsenko 2023-12-02 1:58 ` Sam Protsenko 2023-12-06 11:38 ` Krzysztof Kozlowski 2023-12-06 11:38 ` Krzysztof Kozlowski 2023-12-06 12:47 ` Peter Griffin 2023-12-06 12:47 ` Peter Griffin 2023-12-05 21:24 ` Peter Griffin 2023-12-05 21:24 ` Peter Griffin 2023-12-01 16:09 ` [PATCH v5 15/20] watchdog: s3c2410_wdt: Add support for WTCON register DBGACK_MASK bit Peter Griffin 2023-12-01 16:09 ` Peter Griffin 2023-12-01 23:59 ` William McVicker 2023-12-01 23:59 ` William McVicker 2023-12-02 0:53 ` Sam Protsenko 2023-12-02 0:53 ` Sam Protsenko 2023-12-05 22:03 ` Peter Griffin 2023-12-05 22:03 ` Peter Griffin 2023-12-01 16:09 ` [PATCH v5 16/20] watchdog: s3c2410_wdt: Add support for Google gs101 SoC Peter Griffin 2023-12-01 16:09 ` Peter Griffin 2023-12-01 23:59 ` William McVicker 2023-12-01 23:59 ` William McVicker 2023-12-02 1:02 ` Sam Protsenko 2023-12-02 1:02 ` Sam Protsenko 2023-12-05 22:19 ` Peter Griffin 2023-12-05 22:19 ` Peter Griffin 2023-12-01 16:09 ` [PATCH v5 17/20] tty: serial: samsung: Add gs101 compatible and common fifoszdt_serial_drv_data Peter Griffin 2023-12-01 16:09 ` Peter Griffin 2023-12-02 0:01 ` William McVicker 2023-12-02 0:01 ` William McVicker 2023-12-05 22:29 ` Peter Griffin 2023-12-05 22:29 ` Peter Griffin 2023-12-02 1:09 ` Sam Protsenko 2023-12-02 1:09 ` Sam Protsenko 2023-12-05 22:27 ` Peter Griffin 2023-12-05 22:27 ` Peter Griffin 2023-12-01 16:09 ` [PATCH v5 18/20] arm64: dts: exynos: google: Add initial Google gs101 SoC support Peter Griffin 2023-12-01 16:09 ` Peter Griffin 2023-12-02 0:03 ` William McVicker 2023-12-02 0:03 ` William McVicker 2023-12-02 1:54 ` Sam Protsenko 2023-12-02 1:54 ` Sam Protsenko 2023-12-05 7:19 ` Krzysztof Kozlowski 2023-12-05 7:19 ` Krzysztof Kozlowski 2023-12-09 1:00 ` Peter Griffin 2023-12-09 1:00 ` Peter Griffin 2023-12-01 16:09 ` [PATCH v5 19/20] arm64: dts: exynos: google: Add initial Oriole/pixel 6 board support Peter Griffin 2023-12-01 16:09 ` Peter Griffin 2023-12-02 0:03 ` William McVicker [this message] 2023-12-02 0:03 ` William McVicker 2023-12-02 2:28 ` Sam Protsenko 2023-12-02 2:28 ` Sam Protsenko 2023-12-09 22:04 ` Peter Griffin 2023-12-09 22:04 ` Peter Griffin 2023-12-01 16:09 ` [PATCH v5 20/20] MAINTAINERS: add entry for Google Tensor SoC Peter Griffin 2023-12-01 16:09 ` Peter Griffin 2023-12-01 22:40 ` [PATCH v5 00/20] Add minimal Tensor/GS101 SoC support and Oriole/Pixel6 board William McVicker 2023-12-01 22:40 ` William McVicker
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=ZWp0WapGiXZLn5xn@google.com \ --to=willmcvicker@google.com \ --cc=alim.akhtar@samsung.com \ --cc=andre.draszik@linaro.org \ --cc=arnd@arndb.de \ --cc=catalin.marinas@arm.com \ --cc=conor+dt@kernel.org \ --cc=cw00.choi@samsung.com \ --cc=devicetree@vger.kernel.org \ --cc=gregkh@linuxfoundation.org \ --cc=jirislaby@kernel.org \ --cc=kernel-team@android.com \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linus.walleij@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-clk@vger.kernel.org \ --cc=linux-gpio@vger.kernel.org \ --cc=linux-samsung-soc@vger.kernel.org \ --cc=linux-serial@vger.kernel.org \ --cc=linux-watchdog@vger.kernel.org \ --cc=linux@roeck-us.net \ --cc=mturquette@baylibre.com \ --cc=olof@lixom.net \ --cc=peter.griffin@linaro.org \ --cc=robh+dt@kernel.org \ --cc=s.nawrocki@samsung.com \ --cc=saravanak@google.com \ --cc=sboyd@kernel.org \ --cc=semen.protsenko@linaro.org \ --cc=soc@kernel.org \ --cc=tomasz.figa@gmail.com \ --cc=tudor.ambarus@linaro.org \ --cc=will@kernel.org \ --cc=wim@linux-watchdog.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.