From: Wen Gong <wgong@codeaurora.org>
To: Justin Capella <justincapella@gmail.com>
Cc: ath10k <ath10k@lists.infradead.org>, linux-wireless@vger.kernel.org
Subject: Re: [PATCH v4 1/2] ath10k: add refcount for ath10k_core_restart
Date: Thu, 16 Jan 2020 23:19:21 -0800 [thread overview]
Message-ID: <a1950ee2cb8dd9fc10e7d31bf18c9c95@codeaurora.org> (raw)
In-Reply-To: <55ab2d64e78d51a9da587f276899e08b@codeaurora.org>
On 2020-01-10 02:29, Wen Gong wrote:
> On 2020-01-08 20:02, Justin Capella wrote:
>> I think this might break the "wedged" state.
>>
>> Would simply not taking action unless STATE ON avoid the problems with
>> multiple calls to _restart? ie:
>>
>
> ath10k_core_restart is one part of the recovery process,
> after ath10k_core_restart, it has other things do in
> mac80211/ath10k...,
> it need to make sure all the recovery
> finished(ath10k_reconfig_complete),
> then the next recovery can start from ath10k_core_restart.
Here is some log for the 2 recovery run meanwhile and failed.
It means if 2 recovery run meanwhile, recovery will easy failed.
log steps:
1. simulate crash and then firmware crash and enter ath10k_core_restart
with state=ATH10K_STATE_ON
2. it happened "exceeds length, start recovery" and queued the 2nd
recovery
3. mac80211 start to recovery ath10k and state changed from
ATH10K_STATE_RESTARTING to ATH10K_STATE_RESTARTED
4. enter ath10k_core_restart for 2nd recovery and state changed from
ATH10K_STATE_RESTARTED to ATH10K_STATE_WEDGED
5. mac80211 start to drv_add_interface but failed because
ath10k_htc_send return -ECOMM for ATH10K_STATE_WEDGED
6. mac80211 start to ieee80211_handle_reconfig_failure because
drv_add_interface failed so the recovery failed.
kworker/0:1 13360 [000] 2889.292173: ath10k:ath10k_log_err:
ath10k_sdio mmc1:0001:1 firmware register dump:
kworker/u16:3 11486 [001] 2889.292686:
ath10k:ath10k_log_warn: ath10k_sdio mmc1:0001:1 ath10k_core_restart =>
state :1
kworker/0:1 13360 [000] 2889.292760: ath10k:ath10k_log_warn:
ath10k_sdio mmc1:0001:1 payload length 57005 exceeds max htc length:
4088
kworker/0:1 13360 [000] 2889.292805: ath10k:ath10k_log_warn:
ath10k_sdio mmc1:0001:1 exceeds length, start recovery
kworker/1:3 14712 [001] 2889.850142: ath10k:ath10k_log_dbg:
ath10k_sdio mmc1:0001:1 wmi tlv init
kworker/1:3 14712 [001] 2889.866953: ath10k:ath10k_log_dbg:
ath10k_sdio mmc1:0001:1 wmi tlv scan prob req oui
kworker/u16:3 11486 [001] 2889.888801:
ath10k:ath10k_log_warn: ath10k_sdio mmc1:0001:1 ath10k_core_restart => 2
state :3
kworker/u16:3 11486 [001] 2889.888808:
ath10k:ath10k_log_warn: ath10k_sdio mmc1:0001:1 device is wedged, will
not restart
kworker/1:3 14712 [001] 2889.889220: ath10k:ath10k_log_warn:
ath10k_sdio mmc1:0001:1 ath10k_add_interface => state :4
kworker/1:3 14712 [001] 2889.889229: ath10k:ath10k_log_dbg:
ath10k_sdio mmc1:0001:1 mac create vdev 0 map f
kworker/1:3 14712 [001] 2889.889240: ath10k:ath10k_log_dbg:
ath10k_sdio mmc1:0001:1 mac vdev create 0 (add interface) type 2 subtype
0 bcnmode per-skb
kworker/1:3 14712 [001] 2889.889247: ath10k:ath10k_log_dbg:
ath10k_sdio mmc1:0001:1 wmi tlv vdev create
kworker/1:3 14712 [001] 2889.889252: ath10k:ath10k_wmi_cmd:
ath10k_sdio mmc1:0001:1 id 20481 len 28
kworker/1:3 14712 [001] 2889.889260: ath10k:ath10k_log_warn:
ath10k_sdio mmc1:0001:1 failed to create WMI vdev 0: -70
ieee80211_reconfig will ieee80211_handle_reconfig_failure because
drv_add_interface failed.
so the recovery failed.
detail log for fail
[ 2889.410150] ieee80211 phy0: Hardware restart was requested
[ 2889.889281] drv_add_interface ret:-70
[ 2889.889310] ------------[ cut here ]------------
[ 2889.889547] WARNING: CPU: 1 PID: 14712 at
/mnt/host/source/src/third_party/kernel/v4.19/net/mac80211/util.c:2072
ieee80211_reconfig+0x189c/0x19a4 [mac80211]
[ 2889.889559] Modules linked in: rfcomm uinput cros_ec_rpmsg mtk_dip
mtk_vcodec_enc mtk_seninf mtk_vcodec_dec mtk_mdp3 mtk_fd mtk_cam_isp
mtk_vcodec_common videobuf2_dma_contig videobuf2_memops v4l2_mem2mem
videobuf2_v4l2 videobuf2_common hci_uart btqca bluetooth
hid_google_hammer ecdh_generic ov8856 dw9768 mtk_scp mtk_rpmsg ov02a10
rpmsg_core v4l2_fwnode mtk_scp_ipi nf_nat_tftp nf_conntrack_tftp
nf_nat_ftp nf_conntrack_ftp esp6 ah6 xfrm6_mode_tunnel
xfrm6_mode_transport xfrm4_mode_tunnel xfrm4_mode_transport ip6t_REJECT
ip6t_ipv6header ipt_MASQUERADE fuse iio_trig_sysfs cros_ec_sensors_ring
cros_ec_light_prox cros_ec_sensors cros_ec_sensors_sync
industrialio_triggered_buffer kfifo_buf cros_ec_sensors_core ath10k_sdio
ath10k_core ath mac80211 lzo_rle lzo_compress zram cfg80211 ax88179_178a
usbnet mii
[ 2889.889689] joydev
[ 2889.889709] CPU: 1 PID: 14712 Comm: kworker/1:3 Tainted: G W
4.19.95 #139
[ 2889.889720] Hardware name: MediaTek krane sku176 board (DT)
[ 2889.889776] Workqueue: events_freezable ieee80211_restart_work
[mac80211]
[ 2889.889792] pstate: 60000005 (nZCv daif -PAN -UAO)
[ 2889.889849] pc : ieee80211_reconfig+0x189c/0x19a4 [mac80211]
[ 2889.889908] lr : ieee80211_reconfig+0x189c/0x19a4 [mac80211]
[ 2889.889918] sp : ffffff8012743cc0
[ 2889.889927] x29: ffffff8012743d40 x28: ffffffa381e11f40
[ 2889.889941] x27: ffffffa381ad4018 x26: 0000000000000000
[ 2889.889954] x25: 00000000ffffffba x24: 0000000000000004
[ 2889.889968] x23: ffffffe3b52a2210 x22: ffffffe3c3ae12b8
[ 2889.889981] x21: ffffffe3c3ae12b8 x20: ffffffe3b4e80900
[ 2889.889995] x19: ffffffe3c3ae0800 x18: 000000000003b900
[ 2889.890008] x17: 000000000000003c x16: ffffffa3815c1540
[ 2889.890021] x15: 0000000000000006 x14: ffff001000000600
[ 2889.890034] x13: 00000000002ae45c x12: 0000000000000000
[ 2889.890047] x11: 0000000000000001 x10: 0000000000000007
[ 2889.890061] x9 : c6cfad4ea7c13400 x8 : c6cfad4ea7c13400
[ 2889.890074] x7 : 0000000000000000 x6 : ffffffa381f6cd0c
[ 2889.890087] x5 : 0000000000000000 x4 : 0000000000000000
[ 2889.890100] x3 : 000000000003e2a1 x2 : fffffffffffff704
[ 2889.890113] x1 : 0000000000000000 x0 : 0000000000000024
[ 2889.890127] Call trace:
[ 2889.890185] ieee80211_reconfig+0x189c/0x19a4 [mac80211]
[ 2889.890236] ieee80211_restart_work+0xa0/0xd0 [mac80211]
[ 2889.890258] process_one_work+0x210/0x418
[ 2889.890273] worker_thread+0x234/0x3dc
[ 2889.890288] kthread+0x120/0x130
[ 2889.890303] ret_from_fork+0x10/0x18
[ 2889.890314] ---[ end trace d605ce58e22a44f2 ]---
[ 2889.898956] wlan0: deauthenticating from c4:04:15:3b:e0:38 by local
choice (Reason: 3=DEAUTH_LEAVING)
[ 2889.898995] ------------[ cut here ]------------
[ 2889.899006] wlan0: Failed check-sdata-in-driver check, flags: 0x0
[ 2889.899289] WARNING: CPU: 1 PID: 14712 at
/mnt/host/source/src/third_party/kernel/v4.19/net/mac80211/driver-ops.h:19
ieee80211_bss_info_change_notify+0x23c/0x24c [mac80211]
[ 2889.899303] Modules linked in: rfcomm uinput cros_ec_rpmsg mtk_dip
mtk_vcodec_enc mtk_seninf mtk_vcodec_dec mtk_mdp3 mtk_fd mtk_cam_isp
mtk_vcodec_common videobuf2_dma_contig videobuf2_memops v4l2_mem2mem
videobuf2_v4l2 videobuf2_common hci_uart btqca bluetooth
hid_google_hammer ecdh_generic ov8856 dw9768 mtk_scp mtk_rpmsg ov02a10
rpmsg_core v4l2_fwnode mtk_scp_ipi nf_nat_tftp nf_conntrack_tftp
nf_nat_ftp nf_conntrack_ftp esp6 ah6 xfrm6_mode_tunnel
xfrm6_mode_transport xfrm4_mode_tunnel xfrm4_mode_transport ip6t_REJECT
ip6t_ipv6header ipt_MASQUERADE fuse iio_trig_sysfs cros_ec_sensors_ring
cros_ec_light_prox cros_ec_sensors cros_ec_sensors_sync
industrialio_triggered_buffer kfifo_buf cros_ec_sensors_core ath10k_sdio
ath10k_core ath mac80211 lzo_rle lzo_compress zram cfg80211 ax88179_178a
usbnet mii
[ 2889.899438] joydev
[ 2889.899475] CPU: 1 PID: 14712 Comm: kworker/1:3 Tainted: G W
4.19.95 #139
[ 2889.899486] Hardware name: MediaTek krane sku176 board (DT)
[ 2889.899545] Workqueue: events_freezable ieee80211_restart_work
[mac80211]
[ 2889.899561] pstate: 60000005 (nZCv daif -PAN -UAO)
[ 2889.899612] pc : ieee80211_bss_info_change_notify+0x23c/0x24c
[mac80211]
[ 2889.899664] lr : ieee80211_bss_info_change_notify+0x23c/0x24c
[mac80211]
[ 2889.899674] sp : ffffff8012743820
[ 2889.899686] x29: ffffff8012743860 x28: ffffffa381e11f40
[ 2889.899700] x27: ffffffa381ad4018 x26: 0000000000000000
[ 2889.899712] x25: 0000000000000000 x24: 00000000000000c0
[ 2889.899725] x23: 0000000000000003 x22: ffffff80127438fc
[ 2889.899738] x21: ffffffe3b4e80900 x20: 0000000000020000
[ 2889.899751] x19: ffffffe3c3ae0800 x18: 000000000003c500
[ 2889.899764] x17: 000000000000003c x16: ffffffa3815c1540
[ 2889.899776] x15: 0000000000000006 x14: ffff001000000600
[ 2889.899789] x13: 00000000002ae46e x12: 0000000000000000
[ 2889.899802] x11: 0000000000000000 x10: 0000000000000000
[ 2889.899814] x9 : c6cfad4ea7c13400 x8 : c6cfad4ea7c13400
[ 2889.899827] x7 : 0000000000000000 x6 : ffffffa381f6cd1e
[ 2889.899840] x5 : 0000000000000000 x4 : 0000000000000000
[ 2889.899857] x3 : 000000000003d73b x2 : ffffffe3fff05918
[ 2889.899870] x1 : ffffffe3ffefca08 x0 : 0000000000000036
[ 2889.899883] Call trace:
[ 2889.899935] ieee80211_bss_info_change_notify+0x23c/0x24c [mac80211]
[ 2889.899996] ieee80211_recalc_ps_vif+0x3c/0x48 [mac80211]
[ 2889.900060] ieee80211_set_disassoc+0x84/0x43c [mac80211]
[ 2889.900142] ieee80211_mgd_deauth+0x4e0/0x574 [mac80211]
[ 2889.900201] ieee80211_deauth+0x24/0x30 [mac80211]
[ 2889.900285] cfg80211_mlme_deauth+0x198/0x26c [cfg80211]
[ 2889.900337] cfg80211_mlme_down+0x70/0x98 [cfg80211]
[ 2889.900393] cfg80211_disconnect+0x214/0x250 [cfg80211]
[ 2889.900441] __cfg80211_leave+0xc8/0x14c [cfg80211]
[ 2889.900489] cfg80211_netdev_notifier_call+0x41c/0x668 [cfg80211]
[ 2889.900515] raw_notifier_call_chain+0x48/0x70
[ 2889.900540] call_netdevice_notifiers_info+0x40/0x74
[ 2889.900556] __dev_close_many+0x6c/0x11c
[ 2889.900572] dev_close_many+0x70/0x100
[ 2889.900587] dev_close+0x4c/0x80
[ 2889.900636] cfg80211_shutdown_all_interfaces+0x50/0xcc [cfg80211]
[ 2889.900697] ieee80211_handle_reconfig_failure+0x90/0x9c [mac80211]
[ 2889.900761] ieee80211_reconfig+0x18dc/0x19a4 [mac80211]
[ 2889.900815] ieee80211_restart_work+0xa0/0xd0 [mac80211]
[ 2889.900835] process_one_work+0x210/0x418
[ 2889.900855] worker_thread+0x234/0x3dc
[ 2889.900871] kthread+0x120/0x130
[ 2889.900890] ret_from_fork+0x10/0x18
[ 2889.900905] ---[ end trace d605ce58e22a44f3 ]---
WARNING: multiple messages have this Message-ID (diff)
From: Wen Gong <wgong@codeaurora.org>
To: Justin Capella <justincapella@gmail.com>
Cc: linux-wireless@vger.kernel.org, ath10k <ath10k@lists.infradead.org>
Subject: Re: [PATCH v4 1/2] ath10k: add refcount for ath10k_core_restart
Date: Thu, 16 Jan 2020 23:19:21 -0800 [thread overview]
Message-ID: <a1950ee2cb8dd9fc10e7d31bf18c9c95@codeaurora.org> (raw)
In-Reply-To: <55ab2d64e78d51a9da587f276899e08b@codeaurora.org>
On 2020-01-10 02:29, Wen Gong wrote:
> On 2020-01-08 20:02, Justin Capella wrote:
>> I think this might break the "wedged" state.
>>
>> Would simply not taking action unless STATE ON avoid the problems with
>> multiple calls to _restart? ie:
>>
>
> ath10k_core_restart is one part of the recovery process,
> after ath10k_core_restart, it has other things do in
> mac80211/ath10k...,
> it need to make sure all the recovery
> finished(ath10k_reconfig_complete),
> then the next recovery can start from ath10k_core_restart.
Here is some log for the 2 recovery run meanwhile and failed.
It means if 2 recovery run meanwhile, recovery will easy failed.
log steps:
1. simulate crash and then firmware crash and enter ath10k_core_restart
with state=ATH10K_STATE_ON
2. it happened "exceeds length, start recovery" and queued the 2nd
recovery
3. mac80211 start to recovery ath10k and state changed from
ATH10K_STATE_RESTARTING to ATH10K_STATE_RESTARTED
4. enter ath10k_core_restart for 2nd recovery and state changed from
ATH10K_STATE_RESTARTED to ATH10K_STATE_WEDGED
5. mac80211 start to drv_add_interface but failed because
ath10k_htc_send return -ECOMM for ATH10K_STATE_WEDGED
6. mac80211 start to ieee80211_handle_reconfig_failure because
drv_add_interface failed so the recovery failed.
kworker/0:1 13360 [000] 2889.292173: ath10k:ath10k_log_err:
ath10k_sdio mmc1:0001:1 firmware register dump:
kworker/u16:3 11486 [001] 2889.292686:
ath10k:ath10k_log_warn: ath10k_sdio mmc1:0001:1 ath10k_core_restart =>
state :1
kworker/0:1 13360 [000] 2889.292760: ath10k:ath10k_log_warn:
ath10k_sdio mmc1:0001:1 payload length 57005 exceeds max htc length:
4088
kworker/0:1 13360 [000] 2889.292805: ath10k:ath10k_log_warn:
ath10k_sdio mmc1:0001:1 exceeds length, start recovery
kworker/1:3 14712 [001] 2889.850142: ath10k:ath10k_log_dbg:
ath10k_sdio mmc1:0001:1 wmi tlv init
kworker/1:3 14712 [001] 2889.866953: ath10k:ath10k_log_dbg:
ath10k_sdio mmc1:0001:1 wmi tlv scan prob req oui
kworker/u16:3 11486 [001] 2889.888801:
ath10k:ath10k_log_warn: ath10k_sdio mmc1:0001:1 ath10k_core_restart => 2
state :3
kworker/u16:3 11486 [001] 2889.888808:
ath10k:ath10k_log_warn: ath10k_sdio mmc1:0001:1 device is wedged, will
not restart
kworker/1:3 14712 [001] 2889.889220: ath10k:ath10k_log_warn:
ath10k_sdio mmc1:0001:1 ath10k_add_interface => state :4
kworker/1:3 14712 [001] 2889.889229: ath10k:ath10k_log_dbg:
ath10k_sdio mmc1:0001:1 mac create vdev 0 map f
kworker/1:3 14712 [001] 2889.889240: ath10k:ath10k_log_dbg:
ath10k_sdio mmc1:0001:1 mac vdev create 0 (add interface) type 2 subtype
0 bcnmode per-skb
kworker/1:3 14712 [001] 2889.889247: ath10k:ath10k_log_dbg:
ath10k_sdio mmc1:0001:1 wmi tlv vdev create
kworker/1:3 14712 [001] 2889.889252: ath10k:ath10k_wmi_cmd:
ath10k_sdio mmc1:0001:1 id 20481 len 28
kworker/1:3 14712 [001] 2889.889260: ath10k:ath10k_log_warn:
ath10k_sdio mmc1:0001:1 failed to create WMI vdev 0: -70
ieee80211_reconfig will ieee80211_handle_reconfig_failure because
drv_add_interface failed.
so the recovery failed.
detail log for fail
[ 2889.410150] ieee80211 phy0: Hardware restart was requested
[ 2889.889281] drv_add_interface ret:-70
[ 2889.889310] ------------[ cut here ]------------
[ 2889.889547] WARNING: CPU: 1 PID: 14712 at
/mnt/host/source/src/third_party/kernel/v4.19/net/mac80211/util.c:2072
ieee80211_reconfig+0x189c/0x19a4 [mac80211]
[ 2889.889559] Modules linked in: rfcomm uinput cros_ec_rpmsg mtk_dip
mtk_vcodec_enc mtk_seninf mtk_vcodec_dec mtk_mdp3 mtk_fd mtk_cam_isp
mtk_vcodec_common videobuf2_dma_contig videobuf2_memops v4l2_mem2mem
videobuf2_v4l2 videobuf2_common hci_uart btqca bluetooth
hid_google_hammer ecdh_generic ov8856 dw9768 mtk_scp mtk_rpmsg ov02a10
rpmsg_core v4l2_fwnode mtk_scp_ipi nf_nat_tftp nf_conntrack_tftp
nf_nat_ftp nf_conntrack_ftp esp6 ah6 xfrm6_mode_tunnel
xfrm6_mode_transport xfrm4_mode_tunnel xfrm4_mode_transport ip6t_REJECT
ip6t_ipv6header ipt_MASQUERADE fuse iio_trig_sysfs cros_ec_sensors_ring
cros_ec_light_prox cros_ec_sensors cros_ec_sensors_sync
industrialio_triggered_buffer kfifo_buf cros_ec_sensors_core ath10k_sdio
ath10k_core ath mac80211 lzo_rle lzo_compress zram cfg80211 ax88179_178a
usbnet mii
[ 2889.889689] joydev
[ 2889.889709] CPU: 1 PID: 14712 Comm: kworker/1:3 Tainted: G W
4.19.95 #139
[ 2889.889720] Hardware name: MediaTek krane sku176 board (DT)
[ 2889.889776] Workqueue: events_freezable ieee80211_restart_work
[mac80211]
[ 2889.889792] pstate: 60000005 (nZCv daif -PAN -UAO)
[ 2889.889849] pc : ieee80211_reconfig+0x189c/0x19a4 [mac80211]
[ 2889.889908] lr : ieee80211_reconfig+0x189c/0x19a4 [mac80211]
[ 2889.889918] sp : ffffff8012743cc0
[ 2889.889927] x29: ffffff8012743d40 x28: ffffffa381e11f40
[ 2889.889941] x27: ffffffa381ad4018 x26: 0000000000000000
[ 2889.889954] x25: 00000000ffffffba x24: 0000000000000004
[ 2889.889968] x23: ffffffe3b52a2210 x22: ffffffe3c3ae12b8
[ 2889.889981] x21: ffffffe3c3ae12b8 x20: ffffffe3b4e80900
[ 2889.889995] x19: ffffffe3c3ae0800 x18: 000000000003b900
[ 2889.890008] x17: 000000000000003c x16: ffffffa3815c1540
[ 2889.890021] x15: 0000000000000006 x14: ffff001000000600
[ 2889.890034] x13: 00000000002ae45c x12: 0000000000000000
[ 2889.890047] x11: 0000000000000001 x10: 0000000000000007
[ 2889.890061] x9 : c6cfad4ea7c13400 x8 : c6cfad4ea7c13400
[ 2889.890074] x7 : 0000000000000000 x6 : ffffffa381f6cd0c
[ 2889.890087] x5 : 0000000000000000 x4 : 0000000000000000
[ 2889.890100] x3 : 000000000003e2a1 x2 : fffffffffffff704
[ 2889.890113] x1 : 0000000000000000 x0 : 0000000000000024
[ 2889.890127] Call trace:
[ 2889.890185] ieee80211_reconfig+0x189c/0x19a4 [mac80211]
[ 2889.890236] ieee80211_restart_work+0xa0/0xd0 [mac80211]
[ 2889.890258] process_one_work+0x210/0x418
[ 2889.890273] worker_thread+0x234/0x3dc
[ 2889.890288] kthread+0x120/0x130
[ 2889.890303] ret_from_fork+0x10/0x18
[ 2889.890314] ---[ end trace d605ce58e22a44f2 ]---
[ 2889.898956] wlan0: deauthenticating from c4:04:15:3b:e0:38 by local
choice (Reason: 3=DEAUTH_LEAVING)
[ 2889.898995] ------------[ cut here ]------------
[ 2889.899006] wlan0: Failed check-sdata-in-driver check, flags: 0x0
[ 2889.899289] WARNING: CPU: 1 PID: 14712 at
/mnt/host/source/src/third_party/kernel/v4.19/net/mac80211/driver-ops.h:19
ieee80211_bss_info_change_notify+0x23c/0x24c [mac80211]
[ 2889.899303] Modules linked in: rfcomm uinput cros_ec_rpmsg mtk_dip
mtk_vcodec_enc mtk_seninf mtk_vcodec_dec mtk_mdp3 mtk_fd mtk_cam_isp
mtk_vcodec_common videobuf2_dma_contig videobuf2_memops v4l2_mem2mem
videobuf2_v4l2 videobuf2_common hci_uart btqca bluetooth
hid_google_hammer ecdh_generic ov8856 dw9768 mtk_scp mtk_rpmsg ov02a10
rpmsg_core v4l2_fwnode mtk_scp_ipi nf_nat_tftp nf_conntrack_tftp
nf_nat_ftp nf_conntrack_ftp esp6 ah6 xfrm6_mode_tunnel
xfrm6_mode_transport xfrm4_mode_tunnel xfrm4_mode_transport ip6t_REJECT
ip6t_ipv6header ipt_MASQUERADE fuse iio_trig_sysfs cros_ec_sensors_ring
cros_ec_light_prox cros_ec_sensors cros_ec_sensors_sync
industrialio_triggered_buffer kfifo_buf cros_ec_sensors_core ath10k_sdio
ath10k_core ath mac80211 lzo_rle lzo_compress zram cfg80211 ax88179_178a
usbnet mii
[ 2889.899438] joydev
[ 2889.899475] CPU: 1 PID: 14712 Comm: kworker/1:3 Tainted: G W
4.19.95 #139
[ 2889.899486] Hardware name: MediaTek krane sku176 board (DT)
[ 2889.899545] Workqueue: events_freezable ieee80211_restart_work
[mac80211]
[ 2889.899561] pstate: 60000005 (nZCv daif -PAN -UAO)
[ 2889.899612] pc : ieee80211_bss_info_change_notify+0x23c/0x24c
[mac80211]
[ 2889.899664] lr : ieee80211_bss_info_change_notify+0x23c/0x24c
[mac80211]
[ 2889.899674] sp : ffffff8012743820
[ 2889.899686] x29: ffffff8012743860 x28: ffffffa381e11f40
[ 2889.899700] x27: ffffffa381ad4018 x26: 0000000000000000
[ 2889.899712] x25: 0000000000000000 x24: 00000000000000c0
[ 2889.899725] x23: 0000000000000003 x22: ffffff80127438fc
[ 2889.899738] x21: ffffffe3b4e80900 x20: 0000000000020000
[ 2889.899751] x19: ffffffe3c3ae0800 x18: 000000000003c500
[ 2889.899764] x17: 000000000000003c x16: ffffffa3815c1540
[ 2889.899776] x15: 0000000000000006 x14: ffff001000000600
[ 2889.899789] x13: 00000000002ae46e x12: 0000000000000000
[ 2889.899802] x11: 0000000000000000 x10: 0000000000000000
[ 2889.899814] x9 : c6cfad4ea7c13400 x8 : c6cfad4ea7c13400
[ 2889.899827] x7 : 0000000000000000 x6 : ffffffa381f6cd1e
[ 2889.899840] x5 : 0000000000000000 x4 : 0000000000000000
[ 2889.899857] x3 : 000000000003d73b x2 : ffffffe3fff05918
[ 2889.899870] x1 : ffffffe3ffefca08 x0 : 0000000000000036
[ 2889.899883] Call trace:
[ 2889.899935] ieee80211_bss_info_change_notify+0x23c/0x24c [mac80211]
[ 2889.899996] ieee80211_recalc_ps_vif+0x3c/0x48 [mac80211]
[ 2889.900060] ieee80211_set_disassoc+0x84/0x43c [mac80211]
[ 2889.900142] ieee80211_mgd_deauth+0x4e0/0x574 [mac80211]
[ 2889.900201] ieee80211_deauth+0x24/0x30 [mac80211]
[ 2889.900285] cfg80211_mlme_deauth+0x198/0x26c [cfg80211]
[ 2889.900337] cfg80211_mlme_down+0x70/0x98 [cfg80211]
[ 2889.900393] cfg80211_disconnect+0x214/0x250 [cfg80211]
[ 2889.900441] __cfg80211_leave+0xc8/0x14c [cfg80211]
[ 2889.900489] cfg80211_netdev_notifier_call+0x41c/0x668 [cfg80211]
[ 2889.900515] raw_notifier_call_chain+0x48/0x70
[ 2889.900540] call_netdevice_notifiers_info+0x40/0x74
[ 2889.900556] __dev_close_many+0x6c/0x11c
[ 2889.900572] dev_close_many+0x70/0x100
[ 2889.900587] dev_close+0x4c/0x80
[ 2889.900636] cfg80211_shutdown_all_interfaces+0x50/0xcc [cfg80211]
[ 2889.900697] ieee80211_handle_reconfig_failure+0x90/0x9c [mac80211]
[ 2889.900761] ieee80211_reconfig+0x18dc/0x19a4 [mac80211]
[ 2889.900815] ieee80211_restart_work+0xa0/0xd0 [mac80211]
[ 2889.900835] process_one_work+0x210/0x418
[ 2889.900855] worker_thread+0x234/0x3dc
[ 2889.900871] kthread+0x120/0x130
[ 2889.900890] ret_from_fork+0x10/0x18
[ 2889.900905] ---[ end trace d605ce58e22a44f3 ]---
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
next prev parent reply other threads:[~2020-01-17 7:19 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-08 3:19 [PATCH v4 0/2] start recovery process when payload length overflow for sdio Wen Gong
2020-01-08 3:19 ` Wen Gong
2020-01-08 3:19 ` [PATCH v4 1/2] ath10k: add refcount for ath10k_core_restart Wen Gong
2020-01-08 3:19 ` Wen Gong
2020-01-08 12:02 ` Justin Capella
2020-01-08 12:02 ` Justin Capella
2020-01-10 10:29 ` Wen Gong
2020-01-10 10:29 ` Wen Gong
2020-01-17 7:19 ` Wen Gong [this message]
2020-01-17 7:19 ` Wen Gong
2020-01-20 9:38 ` Justin Capella
2020-01-20 9:38 ` Justin Capella
2020-01-20 13:34 ` Wen Gong
2020-01-20 13:34 ` Wen Gong
2020-01-20 15:37 ` Justin Capella
2020-01-20 15:37 ` Justin Capella
2020-08-14 17:19 ` Kalle Valo
2020-08-14 17:19 ` Kalle Valo
2020-08-18 8:39 ` Wen Gong
2020-08-18 8:39 ` Wen Gong
2020-09-07 15:52 ` Kalle Valo
2020-09-07 15:52 ` Kalle Valo
2020-08-19 12:01 ` Wen Gong
2020-08-19 12:01 ` Wen Gong
2020-08-20 9:18 ` Wen Gong
2020-08-20 9:18 ` Wen Gong
2020-08-24 4:36 ` Wen Gong
2020-08-24 4:36 ` Wen Gong
2020-09-07 15:55 ` Kalle Valo
2020-09-07 15:55 ` Kalle Valo
[not found] ` <871rjd37kz.fsf@codeaurora.org>
2020-09-08 3:47 ` Wen Gong
2020-09-08 3:47 ` Wen Gong
2020-01-08 3:19 ` [PATCH v4 2/2] ath10k: start recovery process when payload length exceeds max htc length for sdio Wen Gong
2020-01-08 3:19 ` Wen Gong
2020-08-14 15:37 ` Kalle Valo
2020-08-14 15:37 ` Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a1950ee2cb8dd9fc10e7d31bf18c9c95@codeaurora.org \
--to=wgong@codeaurora.org \
--cc=ath10k@lists.infradead.org \
--cc=justincapella@gmail.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.