* [PATCH V2 0/3] vdpa: device feature provisioning
@ 2022-09-22 2:43 ` Jason Wang
0 siblings, 0 replies; 55+ messages in thread
From: Jason Wang @ 2022-09-22 2:43 UTC (permalink / raw)
To: mst, jasowang
Cc: elic, si-wei.liu, parav, wuzongyong, virtualization,
linux-kernel, eperezma, lingshan.zhu, gdawar, lulu, xieyongji
Hi All:
Virtio features are neogiated between the device and the drivers. This
allows the mediation layer like vDPA to hide some features from the
driver to faciliate the cross vendor live migration:
vDPA on the source supports feature set X
vDPA on the destination supports feature set Y
Management can simply provision the vDPA instance with features X&Y on
both source and destination to let the vDPA can be migrate-able
between the two vDPA devies with different features support.
This series tries to allow the device features to be provisioned via
netlink to achieve this.
Changes since V1:
- Add vdpa tool command output
Please review.
Thanks
Jason Wang (3):
vdpa: device feature provisioning
vdpa_sim_net: support feature provisioning
vp_vdpa: support feature provisioning
drivers/vdpa/vdpa.c | 5 +++++
drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 11 ++++++++++-
drivers/vdpa/virtio_pci/vp_vdpa.c | 16 ++++++++++++++--
include/linux/vdpa.h | 1 +
include/uapi/linux/vdpa.h | 2 ++
5 files changed, 32 insertions(+), 3 deletions(-)
--
2.25.1
^ permalink raw reply [flat|nested] 55+ messages in thread
* [PATCH V2 0/3] vdpa: device feature provisioning
@ 2022-09-22 2:43 ` Jason Wang
0 siblings, 0 replies; 55+ messages in thread
From: Jason Wang @ 2022-09-22 2:43 UTC (permalink / raw)
To: mst, jasowang
Cc: lulu, xieyongji, linux-kernel, gdawar, virtualization, eperezma,
wuzongyong, elic, lingshan.zhu
Hi All:
Virtio features are neogiated between the device and the drivers. This
allows the mediation layer like vDPA to hide some features from the
driver to faciliate the cross vendor live migration:
vDPA on the source supports feature set X
vDPA on the destination supports feature set Y
Management can simply provision the vDPA instance with features X&Y on
both source and destination to let the vDPA can be migrate-able
between the two vDPA devies with different features support.
This series tries to allow the device features to be provisioned via
netlink to achieve this.
Changes since V1:
- Add vdpa tool command output
Please review.
Thanks
Jason Wang (3):
vdpa: device feature provisioning
vdpa_sim_net: support feature provisioning
vp_vdpa: support feature provisioning
drivers/vdpa/vdpa.c | 5 +++++
drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 11 ++++++++++-
drivers/vdpa/virtio_pci/vp_vdpa.c | 16 ++++++++++++++--
include/linux/vdpa.h | 1 +
include/uapi/linux/vdpa.h | 2 ++
5 files changed, 32 insertions(+), 3 deletions(-)
--
2.25.1
_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
^ permalink raw reply [flat|nested] 55+ messages in thread
* [PATCH V2 1/3] vdpa: device feature provisioning
2022-09-22 2:43 ` Jason Wang
@ 2022-09-22 2:43 ` Jason Wang
-1 siblings, 0 replies; 55+ messages in thread
From: Jason Wang @ 2022-09-22 2:43 UTC (permalink / raw)
To: mst, jasowang
Cc: elic, si-wei.liu, parav, wuzongyong, virtualization,
linux-kernel, eperezma, lingshan.zhu, gdawar, lulu, xieyongji
This patch allows the device features to be provisioned through
netlink. A new attribute is introduced to allow the userspace to pass
a 64bit device features during device adding.
This provides several advantages:
- Allow to provision a subset of the features to ease the cross vendor
live migration.
- Better debug-ability for vDPA framework and parent.
Reviewed-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
---
drivers/vdpa/vdpa.c | 5 +++++
include/linux/vdpa.h | 1 +
include/uapi/linux/vdpa.h | 2 ++
3 files changed, 8 insertions(+)
diff --git a/drivers/vdpa/vdpa.c b/drivers/vdpa/vdpa.c
index c06c02704461..278e26bfa492 100644
--- a/drivers/vdpa/vdpa.c
+++ b/drivers/vdpa/vdpa.c
@@ -600,6 +600,11 @@ static int vdpa_nl_cmd_dev_add_set_doit(struct sk_buff *skb, struct genl_info *i
}
config.mask |= BIT_ULL(VDPA_ATTR_DEV_NET_CFG_MAX_VQP);
}
+ if (nl_attrs[VDPA_ATTR_DEV_FEATURES]) {
+ config.device_features =
+ nla_get_u64(nl_attrs[VDPA_ATTR_DEV_FEATURES]);
+ config.mask |= BIT_ULL(VDPA_ATTR_DEV_FEATURES);
+ }
/* Skip checking capability if user didn't prefer to configure any
* device networking attributes. It is likely that user might have used
diff --git a/include/linux/vdpa.h b/include/linux/vdpa.h
index d282f464d2f1..6d0f5e4e82c2 100644
--- a/include/linux/vdpa.h
+++ b/include/linux/vdpa.h
@@ -104,6 +104,7 @@ struct vdpa_iova_range {
};
struct vdpa_dev_set_config {
+ u64 device_features;
struct {
u8 mac[ETH_ALEN];
u16 mtu;
diff --git a/include/uapi/linux/vdpa.h b/include/uapi/linux/vdpa.h
index 25c55cab3d7c..9dc855f37c59 100644
--- a/include/uapi/linux/vdpa.h
+++ b/include/uapi/linux/vdpa.h
@@ -52,6 +52,8 @@ enum vdpa_attr {
VDPA_ATTR_DEV_VENDOR_ATTR_NAME, /* string */
VDPA_ATTR_DEV_VENDOR_ATTR_VALUE, /* u64 */
+ VDPA_ATTR_DEV_FEATURES, /* u64 */
+
/* new attributes must be added above here */
VDPA_ATTR_MAX,
};
--
2.25.1
^ permalink raw reply related [flat|nested] 55+ messages in thread
* [PATCH V2 1/3] vdpa: device feature provisioning
@ 2022-09-22 2:43 ` Jason Wang
0 siblings, 0 replies; 55+ messages in thread
From: Jason Wang @ 2022-09-22 2:43 UTC (permalink / raw)
To: mst, jasowang
Cc: lulu, xieyongji, linux-kernel, gdawar, virtualization, eperezma,
wuzongyong, elic, lingshan.zhu
This patch allows the device features to be provisioned through
netlink. A new attribute is introduced to allow the userspace to pass
a 64bit device features during device adding.
This provides several advantages:
- Allow to provision a subset of the features to ease the cross vendor
live migration.
- Better debug-ability for vDPA framework and parent.
Reviewed-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
---
drivers/vdpa/vdpa.c | 5 +++++
include/linux/vdpa.h | 1 +
include/uapi/linux/vdpa.h | 2 ++
3 files changed, 8 insertions(+)
diff --git a/drivers/vdpa/vdpa.c b/drivers/vdpa/vdpa.c
index c06c02704461..278e26bfa492 100644
--- a/drivers/vdpa/vdpa.c
+++ b/drivers/vdpa/vdpa.c
@@ -600,6 +600,11 @@ static int vdpa_nl_cmd_dev_add_set_doit(struct sk_buff *skb, struct genl_info *i
}
config.mask |= BIT_ULL(VDPA_ATTR_DEV_NET_CFG_MAX_VQP);
}
+ if (nl_attrs[VDPA_ATTR_DEV_FEATURES]) {
+ config.device_features =
+ nla_get_u64(nl_attrs[VDPA_ATTR_DEV_FEATURES]);
+ config.mask |= BIT_ULL(VDPA_ATTR_DEV_FEATURES);
+ }
/* Skip checking capability if user didn't prefer to configure any
* device networking attributes. It is likely that user might have used
diff --git a/include/linux/vdpa.h b/include/linux/vdpa.h
index d282f464d2f1..6d0f5e4e82c2 100644
--- a/include/linux/vdpa.h
+++ b/include/linux/vdpa.h
@@ -104,6 +104,7 @@ struct vdpa_iova_range {
};
struct vdpa_dev_set_config {
+ u64 device_features;
struct {
u8 mac[ETH_ALEN];
u16 mtu;
diff --git a/include/uapi/linux/vdpa.h b/include/uapi/linux/vdpa.h
index 25c55cab3d7c..9dc855f37c59 100644
--- a/include/uapi/linux/vdpa.h
+++ b/include/uapi/linux/vdpa.h
@@ -52,6 +52,8 @@ enum vdpa_attr {
VDPA_ATTR_DEV_VENDOR_ATTR_NAME, /* string */
VDPA_ATTR_DEV_VENDOR_ATTR_VALUE, /* u64 */
+ VDPA_ATTR_DEV_FEATURES, /* u64 */
+
/* new attributes must be added above here */
VDPA_ATTR_MAX,
};
--
2.25.1
_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
^ permalink raw reply related [flat|nested] 55+ messages in thread
* [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
2022-09-22 2:43 ` Jason Wang
@ 2022-09-22 2:43 ` Jason Wang
-1 siblings, 0 replies; 55+ messages in thread
From: Jason Wang @ 2022-09-22 2:43 UTC (permalink / raw)
To: mst, jasowang
Cc: elic, si-wei.liu, parav, wuzongyong, virtualization,
linux-kernel, eperezma, lingshan.zhu, gdawar, lulu, xieyongji
This patch implements features provisioning for vdpa_sim_net.
1) validating the provisioned features to be a subset of the parent
features.
2) clearing the features that is not wanted by the userspace
For example:
# vdpa mgmtdev show
vdpasim_net:
supported_classes net
max_supported_vqs 3
dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM
1) provision vDPA device with all features that are supported by the
net simulator
# vdpa dev add name dev1 mgmtdev vdpasim_net
# vdpa dev config show
dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
negotiated_features MTU MAC CTRL_VQ CTRL_MAC_ADDR VERSION_1 ACCESS_PLATFORM
2) provision vDPA device with a subset of the features
# vdpa dev add name dev1 mgmtdev vdpasim_net device_features 0x300020000
# vdpa dev config show
dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
negotiated_features CTRL_VQ VERSION_1 ACCESS_PLATFORM
Reviewed-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
---
drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
index 886449e88502..a9ba02be378b 100644
--- a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
+++ b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
@@ -254,6 +254,14 @@ static int vdpasim_net_dev_add(struct vdpa_mgmt_dev *mdev, const char *name,
dev_attr.work_fn = vdpasim_net_work;
dev_attr.buffer_size = PAGE_SIZE;
+ if (config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) {
+ if (config->device_features &
+ ~dev_attr.supported_features)
+ return -EINVAL;
+ dev_attr.supported_features &=
+ config->device_features;
+ }
+
simdev = vdpasim_create(&dev_attr);
if (IS_ERR(simdev))
return PTR_ERR(simdev);
@@ -294,7 +302,8 @@ static struct vdpa_mgmt_dev mgmt_dev = {
.id_table = id_table,
.ops = &vdpasim_net_mgmtdev_ops,
.config_attr_mask = (1 << VDPA_ATTR_DEV_NET_CFG_MACADDR |
- 1 << VDPA_ATTR_DEV_NET_CFG_MTU),
+ 1 << VDPA_ATTR_DEV_NET_CFG_MTU |
+ 1 << VDPA_ATTR_DEV_FEATURES),
.max_supported_vqs = VDPASIM_NET_VQ_NUM,
.supported_features = VDPASIM_NET_FEATURES,
};
--
2.25.1
^ permalink raw reply related [flat|nested] 55+ messages in thread
* [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
@ 2022-09-22 2:43 ` Jason Wang
0 siblings, 0 replies; 55+ messages in thread
From: Jason Wang @ 2022-09-22 2:43 UTC (permalink / raw)
To: mst, jasowang
Cc: lulu, xieyongji, linux-kernel, gdawar, virtualization, eperezma,
wuzongyong, elic, lingshan.zhu
This patch implements features provisioning for vdpa_sim_net.
1) validating the provisioned features to be a subset of the parent
features.
2) clearing the features that is not wanted by the userspace
For example:
# vdpa mgmtdev show
vdpasim_net:
supported_classes net
max_supported_vqs 3
dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM
1) provision vDPA device with all features that are supported by the
net simulator
# vdpa dev add name dev1 mgmtdev vdpasim_net
# vdpa dev config show
dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
negotiated_features MTU MAC CTRL_VQ CTRL_MAC_ADDR VERSION_1 ACCESS_PLATFORM
2) provision vDPA device with a subset of the features
# vdpa dev add name dev1 mgmtdev vdpasim_net device_features 0x300020000
# vdpa dev config show
dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
negotiated_features CTRL_VQ VERSION_1 ACCESS_PLATFORM
Reviewed-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
---
drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
index 886449e88502..a9ba02be378b 100644
--- a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
+++ b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
@@ -254,6 +254,14 @@ static int vdpasim_net_dev_add(struct vdpa_mgmt_dev *mdev, const char *name,
dev_attr.work_fn = vdpasim_net_work;
dev_attr.buffer_size = PAGE_SIZE;
+ if (config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) {
+ if (config->device_features &
+ ~dev_attr.supported_features)
+ return -EINVAL;
+ dev_attr.supported_features &=
+ config->device_features;
+ }
+
simdev = vdpasim_create(&dev_attr);
if (IS_ERR(simdev))
return PTR_ERR(simdev);
@@ -294,7 +302,8 @@ static struct vdpa_mgmt_dev mgmt_dev = {
.id_table = id_table,
.ops = &vdpasim_net_mgmtdev_ops,
.config_attr_mask = (1 << VDPA_ATTR_DEV_NET_CFG_MACADDR |
- 1 << VDPA_ATTR_DEV_NET_CFG_MTU),
+ 1 << VDPA_ATTR_DEV_NET_CFG_MTU |
+ 1 << VDPA_ATTR_DEV_FEATURES),
.max_supported_vqs = VDPASIM_NET_VQ_NUM,
.supported_features = VDPASIM_NET_FEATURES,
};
--
2.25.1
_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
^ permalink raw reply related [flat|nested] 55+ messages in thread
* [PATCH V2 3/3] vp_vdpa: support feature provisioning
2022-09-22 2:43 ` Jason Wang
@ 2022-09-22 2:43 ` Jason Wang
-1 siblings, 0 replies; 55+ messages in thread
From: Jason Wang @ 2022-09-22 2:43 UTC (permalink / raw)
To: mst, jasowang
Cc: elic, si-wei.liu, parav, wuzongyong, virtualization,
linux-kernel, eperezma, lingshan.zhu, gdawar, lulu, xieyongji
This patch allows the device features to be provisioned via
netlink. This is done by:
1) validating the provisioned features to be a subset of the parent
features.
2) clearing the features that is not wanted by the userspace
For example:
# vdpa mgmtdev show
pci/0000:02:00.0:
supported_classes net
max_supported_vqs 3
dev_features CSUM GUEST_CSUM CTRL_GUEST_OFFLOADS MAC GUEST_TSO4
GUEST_TSO6 GUEST_ECN GUEST_UFO HOST_TSO4 HOST_TSO6 HOST_ECN HOST_UFO
MRG_RXBUF STATUS CTRL_VQ CTRL_RX CTRL_VLAN CTRL_RX_EXTRA
GUEST_ANNOUNCE CTRL_MAC_ADDR RING_INDIRECT_DESC RING_EVENT_IDX
VERSION_1 ACCESS_PLATFORM
1) provision vDPA device with all features that are supported by the virtio-pci
# vdpa dev add name dev1 mgmtdev pci/0000:02:00.0
# vdpa dev config show
dev1: mac 52:54:00:12:34:56 link up link_announce false mtu 65535
negotiated_features CSUM GUEST_CSUM CTRL_GUEST_OFFLOADS MAC
GUEST_TSO4 GUEST_TSO6 GUEST_ECN GUEST_UFO HOST_TSO4 HOST_TSO6
HOST_ECN HOST_UFO MRG_RXBUF STATUS CTRL_VQ CTRL_RX CTRL_VLAN
GUEST_ANNOUNCE CTRL_MAC_ADDR RING_INDIRECT_DESC RING_EVENT_IDX
VERSION_1 ACCESS_PLATFORM
2) provision vDPA device with a subset of the features
# vdpa dev add name dev1 mgmtdev pci/0000:02:00.0 device_features 0x300020000
# dev1: mac 52:54:00:12:34:56 link up link_announce false mtu 65535
negotiated_features CTRL_VQ VERSION_1 ACCESS_PLATFORM
Reviewed-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
---
drivers/vdpa/virtio_pci/vp_vdpa.c | 16 ++++++++++++++--
1 file changed, 14 insertions(+), 2 deletions(-)
diff --git a/drivers/vdpa/virtio_pci/vp_vdpa.c b/drivers/vdpa/virtio_pci/vp_vdpa.c
index 04522077735b..4b28e0c95ba2 100644
--- a/drivers/vdpa/virtio_pci/vp_vdpa.c
+++ b/drivers/vdpa/virtio_pci/vp_vdpa.c
@@ -17,6 +17,7 @@
#include <linux/virtio_ring.h>
#include <linux/virtio_pci.h>
#include <linux/virtio_pci_modern.h>
+#include <uapi/linux/vdpa.h>
#define VP_VDPA_QUEUE_MAX 256
#define VP_VDPA_DRIVER_NAME "vp_vdpa"
@@ -35,6 +36,7 @@ struct vp_vdpa {
struct virtio_pci_modern_device *mdev;
struct vp_vring *vring;
struct vdpa_callback config_cb;
+ u64 device_features;
char msix_name[VP_VDPA_NAME_SIZE];
int config_irq;
int queues;
@@ -66,9 +68,9 @@ static struct virtio_pci_modern_device *vp_vdpa_to_mdev(struct vp_vdpa *vp_vdpa)
static u64 vp_vdpa_get_device_features(struct vdpa_device *vdpa)
{
- struct virtio_pci_modern_device *mdev = vdpa_to_mdev(vdpa);
+ struct vp_vdpa *vp_vdpa = vdpa_to_vp(vdpa);
- return vp_modern_get_features(mdev);
+ return vp_vdpa->device_features;
}
static int vp_vdpa_set_driver_features(struct vdpa_device *vdpa, u64 features)
@@ -475,6 +477,7 @@ static int vp_vdpa_dev_add(struct vdpa_mgmt_dev *v_mdev, const char *name,
struct pci_dev *pdev = mdev->pci_dev;
struct device *dev = &pdev->dev;
struct vp_vdpa *vp_vdpa = NULL;
+ u64 device_features;
int ret, i;
vp_vdpa = vdpa_alloc_device(struct vp_vdpa, vdpa,
@@ -491,6 +494,14 @@ static int vp_vdpa_dev_add(struct vdpa_mgmt_dev *v_mdev, const char *name,
vp_vdpa->queues = vp_modern_get_num_queues(mdev);
vp_vdpa->mdev = mdev;
+ device_features = vp_modern_get_features(mdev);
+ if (add_config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) {
+ if (add_config->device_features & ~device_features)
+ return -EINVAL;
+ device_features &= add_config->device_features;
+ }
+ vp_vdpa->device_features = device_features;
+
ret = devm_add_action_or_reset(dev, vp_vdpa_free_irq_vectors, pdev);
if (ret) {
dev_err(&pdev->dev,
@@ -599,6 +610,7 @@ static int vp_vdpa_probe(struct pci_dev *pdev, const struct pci_device_id *id)
mgtdev->id_table = mdev_id;
mgtdev->max_supported_vqs = vp_modern_get_num_queues(mdev);
mgtdev->supported_features = vp_modern_get_features(mdev);
+ mgtdev->config_attr_mask = (1 << VDPA_ATTR_DEV_FEATURES);
pci_set_master(pdev);
pci_set_drvdata(pdev, vp_vdpa_mgtdev);
--
2.25.1
^ permalink raw reply related [flat|nested] 55+ messages in thread
* [PATCH V2 3/3] vp_vdpa: support feature provisioning
@ 2022-09-22 2:43 ` Jason Wang
0 siblings, 0 replies; 55+ messages in thread
From: Jason Wang @ 2022-09-22 2:43 UTC (permalink / raw)
To: mst, jasowang
Cc: lulu, xieyongji, linux-kernel, gdawar, virtualization, eperezma,
wuzongyong, elic, lingshan.zhu
This patch allows the device features to be provisioned via
netlink. This is done by:
1) validating the provisioned features to be a subset of the parent
features.
2) clearing the features that is not wanted by the userspace
For example:
# vdpa mgmtdev show
pci/0000:02:00.0:
supported_classes net
max_supported_vqs 3
dev_features CSUM GUEST_CSUM CTRL_GUEST_OFFLOADS MAC GUEST_TSO4
GUEST_TSO6 GUEST_ECN GUEST_UFO HOST_TSO4 HOST_TSO6 HOST_ECN HOST_UFO
MRG_RXBUF STATUS CTRL_VQ CTRL_RX CTRL_VLAN CTRL_RX_EXTRA
GUEST_ANNOUNCE CTRL_MAC_ADDR RING_INDIRECT_DESC RING_EVENT_IDX
VERSION_1 ACCESS_PLATFORM
1) provision vDPA device with all features that are supported by the virtio-pci
# vdpa dev add name dev1 mgmtdev pci/0000:02:00.0
# vdpa dev config show
dev1: mac 52:54:00:12:34:56 link up link_announce false mtu 65535
negotiated_features CSUM GUEST_CSUM CTRL_GUEST_OFFLOADS MAC
GUEST_TSO4 GUEST_TSO6 GUEST_ECN GUEST_UFO HOST_TSO4 HOST_TSO6
HOST_ECN HOST_UFO MRG_RXBUF STATUS CTRL_VQ CTRL_RX CTRL_VLAN
GUEST_ANNOUNCE CTRL_MAC_ADDR RING_INDIRECT_DESC RING_EVENT_IDX
VERSION_1 ACCESS_PLATFORM
2) provision vDPA device with a subset of the features
# vdpa dev add name dev1 mgmtdev pci/0000:02:00.0 device_features 0x300020000
# dev1: mac 52:54:00:12:34:56 link up link_announce false mtu 65535
negotiated_features CTRL_VQ VERSION_1 ACCESS_PLATFORM
Reviewed-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
---
drivers/vdpa/virtio_pci/vp_vdpa.c | 16 ++++++++++++++--
1 file changed, 14 insertions(+), 2 deletions(-)
diff --git a/drivers/vdpa/virtio_pci/vp_vdpa.c b/drivers/vdpa/virtio_pci/vp_vdpa.c
index 04522077735b..4b28e0c95ba2 100644
--- a/drivers/vdpa/virtio_pci/vp_vdpa.c
+++ b/drivers/vdpa/virtio_pci/vp_vdpa.c
@@ -17,6 +17,7 @@
#include <linux/virtio_ring.h>
#include <linux/virtio_pci.h>
#include <linux/virtio_pci_modern.h>
+#include <uapi/linux/vdpa.h>
#define VP_VDPA_QUEUE_MAX 256
#define VP_VDPA_DRIVER_NAME "vp_vdpa"
@@ -35,6 +36,7 @@ struct vp_vdpa {
struct virtio_pci_modern_device *mdev;
struct vp_vring *vring;
struct vdpa_callback config_cb;
+ u64 device_features;
char msix_name[VP_VDPA_NAME_SIZE];
int config_irq;
int queues;
@@ -66,9 +68,9 @@ static struct virtio_pci_modern_device *vp_vdpa_to_mdev(struct vp_vdpa *vp_vdpa)
static u64 vp_vdpa_get_device_features(struct vdpa_device *vdpa)
{
- struct virtio_pci_modern_device *mdev = vdpa_to_mdev(vdpa);
+ struct vp_vdpa *vp_vdpa = vdpa_to_vp(vdpa);
- return vp_modern_get_features(mdev);
+ return vp_vdpa->device_features;
}
static int vp_vdpa_set_driver_features(struct vdpa_device *vdpa, u64 features)
@@ -475,6 +477,7 @@ static int vp_vdpa_dev_add(struct vdpa_mgmt_dev *v_mdev, const char *name,
struct pci_dev *pdev = mdev->pci_dev;
struct device *dev = &pdev->dev;
struct vp_vdpa *vp_vdpa = NULL;
+ u64 device_features;
int ret, i;
vp_vdpa = vdpa_alloc_device(struct vp_vdpa, vdpa,
@@ -491,6 +494,14 @@ static int vp_vdpa_dev_add(struct vdpa_mgmt_dev *v_mdev, const char *name,
vp_vdpa->queues = vp_modern_get_num_queues(mdev);
vp_vdpa->mdev = mdev;
+ device_features = vp_modern_get_features(mdev);
+ if (add_config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) {
+ if (add_config->device_features & ~device_features)
+ return -EINVAL;
+ device_features &= add_config->device_features;
+ }
+ vp_vdpa->device_features = device_features;
+
ret = devm_add_action_or_reset(dev, vp_vdpa_free_irq_vectors, pdev);
if (ret) {
dev_err(&pdev->dev,
@@ -599,6 +610,7 @@ static int vp_vdpa_probe(struct pci_dev *pdev, const struct pci_device_id *id)
mgtdev->id_table = mdev_id;
mgtdev->max_supported_vqs = vp_modern_get_num_queues(mdev);
mgtdev->supported_features = vp_modern_get_features(mdev);
+ mgtdev->config_attr_mask = (1 << VDPA_ATTR_DEV_FEATURES);
pci_set_master(pdev);
pci_set_drvdata(pdev, vp_vdpa_mgtdev);
--
2.25.1
_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
^ permalink raw reply related [flat|nested] 55+ messages in thread
* RE: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
2022-09-22 2:43 ` Jason Wang
(?)
@ 2022-09-22 5:13 ` Eli Cohen
2022-09-22 7:29 ` Michael S. Tsirkin
2022-09-23 4:20 ` Jason Wang
-1 siblings, 2 replies; 55+ messages in thread
From: Eli Cohen @ 2022-09-22 5:13 UTC (permalink / raw)
To: Jason Wang, mst
Cc: si-wei.liu, Parav Pandit, wuzongyong, virtualization,
linux-kernel, eperezma, lingshan.zhu, gdawar, lulu, xieyongji
> From: Jason Wang <jasowang@redhat.com>
> Sent: Thursday, 22 September 2022 5:43
> To: mst@redhat.com; jasowang@redhat.com
> Cc: Eli Cohen <elic@nvidia.com>; si-wei.liu@oracle.com; Parav Pandit
> <parav@nvidia.com>; wuzongyong@linux.alibaba.com;
> virtualization@lists.linux-foundation.org; linux-kernel@vger.kernel.org;
> eperezma@redhat.com; lingshan.zhu@intel.com; gdawar@xilinx.com;
> lulu@redhat.com; xieyongji@bytedance.com
> Subject: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
>
> This patch implements features provisioning for vdpa_sim_net.
>
> 1) validating the provisioned features to be a subset of the parent
> features.
> 2) clearing the features that is not wanted by the userspace
>
> For example:
>
> # vdpa mgmtdev show
> vdpasim_net:
> supported_classes net
> max_supported_vqs 3
> dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT
> VERSION_1 ACCESS_PLATFORM
>
> 1) provision vDPA device with all features that are supported by the
> net simulator
>
> # vdpa dev add name dev1 mgmtdev vdpasim_net
> # vdpa dev config show
> dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> negotiated_features MTU MAC CTRL_VQ CTRL_MAC_ADDR VERSION_1
> ACCESS_PLATFORM
>
> 2) provision vDPA device with a subset of the features
>
> # vdpa dev add name dev1 mgmtdev vdpasim_net device_features
> 0x300020000
How about "features_mask" instead of "device_features"? Could avoid confusion.
> # vdpa dev config show
> dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> negotiated_features CTRL_VQ VERSION_1 ACCESS_PLATFORM
>
> Reviewed-by: Eli Cohen <elic@nvidia.com>
> Signed-off-by: Jason Wang <jasowang@redhat.com>
> ---
> drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 11 ++++++++++-
> 1 file changed, 10 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> index 886449e88502..a9ba02be378b 100644
> --- a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> +++ b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> @@ -254,6 +254,14 @@ static int vdpasim_net_dev_add(struct
> vdpa_mgmt_dev *mdev, const char *name,
> dev_attr.work_fn = vdpasim_net_work;
> dev_attr.buffer_size = PAGE_SIZE;
>
> + if (config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) {
> + if (config->device_features &
> + ~dev_attr.supported_features)
> + return -EINVAL;
> + dev_attr.supported_features &=
> + config->device_features;
> + }
> +
> simdev = vdpasim_create(&dev_attr);
> if (IS_ERR(simdev))
> return PTR_ERR(simdev);
> @@ -294,7 +302,8 @@ static struct vdpa_mgmt_dev mgmt_dev = {
> .id_table = id_table,
> .ops = &vdpasim_net_mgmtdev_ops,
> .config_attr_mask = (1 << VDPA_ATTR_DEV_NET_CFG_MACADDR |
> - 1 << VDPA_ATTR_DEV_NET_CFG_MTU),
> + 1 << VDPA_ATTR_DEV_NET_CFG_MTU |
> + 1 << VDPA_ATTR_DEV_FEATURES),
> .max_supported_vqs = VDPASIM_NET_VQ_NUM,
> .supported_features = VDPASIM_NET_FEATURES,
> };
> --
> 2.25.1
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
2022-09-22 5:13 ` Eli Cohen
@ 2022-09-22 7:29 ` Michael S. Tsirkin
2022-09-23 4:20 ` Jason Wang
1 sibling, 0 replies; 55+ messages in thread
From: Michael S. Tsirkin @ 2022-09-22 7:29 UTC (permalink / raw)
To: Eli Cohen
Cc: Jason Wang, si-wei.liu, Parav Pandit, wuzongyong, virtualization,
linux-kernel, eperezma, lingshan.zhu, gdawar, lulu, xieyongji
On Thu, Sep 22, 2022 at 05:13:59AM +0000, Eli Cohen wrote:
> > From: Jason Wang <jasowang@redhat.com>
> > Sent: Thursday, 22 September 2022 5:43
> > To: mst@redhat.com; jasowang@redhat.com
> > Cc: Eli Cohen <elic@nvidia.com>; si-wei.liu@oracle.com; Parav Pandit
> > <parav@nvidia.com>; wuzongyong@linux.alibaba.com;
> > virtualization@lists.linux-foundation.org; linux-kernel@vger.kernel.org;
> > eperezma@redhat.com; lingshan.zhu@intel.com; gdawar@xilinx.com;
> > lulu@redhat.com; xieyongji@bytedance.com
> > Subject: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
> >
> > This patch implements features provisioning for vdpa_sim_net.
> >
> > 1) validating the provisioned features to be a subset of the parent
> > features.
> > 2) clearing the features that is not wanted by the userspace
> >
> > For example:
> >
> > # vdpa mgmtdev show
> > vdpasim_net:
> > supported_classes net
> > max_supported_vqs 3
> > dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT
> > VERSION_1 ACCESS_PLATFORM
> >
> > 1) provision vDPA device with all features that are supported by the
> > net simulator
> >
> > # vdpa dev add name dev1 mgmtdev vdpasim_net
> > # vdpa dev config show
> > dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> > negotiated_features MTU MAC CTRL_VQ CTRL_MAC_ADDR VERSION_1
> > ACCESS_PLATFORM
> >
> > 2) provision vDPA device with a subset of the features
> >
> > # vdpa dev add name dev1 mgmtdev vdpasim_net device_features
> > 0x300020000
>
> How about "features_mask" instead of "device_features"? Could avoid confusion.
Not sure I agree.
features_mask to me would mean it is & with features. Not the case here.
> > # vdpa dev config show
> > dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> > negotiated_features CTRL_VQ VERSION_1 ACCESS_PLATFORM
> >
> > Reviewed-by: Eli Cohen <elic@nvidia.com>
> > Signed-off-by: Jason Wang <jasowang@redhat.com>
> > ---
> > drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 11 ++++++++++-
> > 1 file changed, 10 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > index 886449e88502..a9ba02be378b 100644
> > --- a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > +++ b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > @@ -254,6 +254,14 @@ static int vdpasim_net_dev_add(struct
> > vdpa_mgmt_dev *mdev, const char *name,
> > dev_attr.work_fn = vdpasim_net_work;
> > dev_attr.buffer_size = PAGE_SIZE;
> >
> > + if (config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) {
> > + if (config->device_features &
> > + ~dev_attr.supported_features)
> > + return -EINVAL;
> > + dev_attr.supported_features &=
> > + config->device_features;
> > + }
> > +
> > simdev = vdpasim_create(&dev_attr);
> > if (IS_ERR(simdev))
> > return PTR_ERR(simdev);
> > @@ -294,7 +302,8 @@ static struct vdpa_mgmt_dev mgmt_dev = {
> > .id_table = id_table,
> > .ops = &vdpasim_net_mgmtdev_ops,
> > .config_attr_mask = (1 << VDPA_ATTR_DEV_NET_CFG_MACADDR |
> > - 1 << VDPA_ATTR_DEV_NET_CFG_MTU),
> > + 1 << VDPA_ATTR_DEV_NET_CFG_MTU |
> > + 1 << VDPA_ATTR_DEV_FEATURES),
> > .max_supported_vqs = VDPASIM_NET_VQ_NUM,
> > .supported_features = VDPASIM_NET_FEATURES,
> > };
> > --
> > 2.25.1
>
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
@ 2022-09-22 7:29 ` Michael S. Tsirkin
0 siblings, 0 replies; 55+ messages in thread
From: Michael S. Tsirkin @ 2022-09-22 7:29 UTC (permalink / raw)
To: Eli Cohen
Cc: lulu, xieyongji, linux-kernel, gdawar, virtualization, eperezma,
wuzongyong, lingshan.zhu
On Thu, Sep 22, 2022 at 05:13:59AM +0000, Eli Cohen wrote:
> > From: Jason Wang <jasowang@redhat.com>
> > Sent: Thursday, 22 September 2022 5:43
> > To: mst@redhat.com; jasowang@redhat.com
> > Cc: Eli Cohen <elic@nvidia.com>; si-wei.liu@oracle.com; Parav Pandit
> > <parav@nvidia.com>; wuzongyong@linux.alibaba.com;
> > virtualization@lists.linux-foundation.org; linux-kernel@vger.kernel.org;
> > eperezma@redhat.com; lingshan.zhu@intel.com; gdawar@xilinx.com;
> > lulu@redhat.com; xieyongji@bytedance.com
> > Subject: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
> >
> > This patch implements features provisioning for vdpa_sim_net.
> >
> > 1) validating the provisioned features to be a subset of the parent
> > features.
> > 2) clearing the features that is not wanted by the userspace
> >
> > For example:
> >
> > # vdpa mgmtdev show
> > vdpasim_net:
> > supported_classes net
> > max_supported_vqs 3
> > dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT
> > VERSION_1 ACCESS_PLATFORM
> >
> > 1) provision vDPA device with all features that are supported by the
> > net simulator
> >
> > # vdpa dev add name dev1 mgmtdev vdpasim_net
> > # vdpa dev config show
> > dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> > negotiated_features MTU MAC CTRL_VQ CTRL_MAC_ADDR VERSION_1
> > ACCESS_PLATFORM
> >
> > 2) provision vDPA device with a subset of the features
> >
> > # vdpa dev add name dev1 mgmtdev vdpasim_net device_features
> > 0x300020000
>
> How about "features_mask" instead of "device_features"? Could avoid confusion.
Not sure I agree.
features_mask to me would mean it is & with features. Not the case here.
> > # vdpa dev config show
> > dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> > negotiated_features CTRL_VQ VERSION_1 ACCESS_PLATFORM
> >
> > Reviewed-by: Eli Cohen <elic@nvidia.com>
> > Signed-off-by: Jason Wang <jasowang@redhat.com>
> > ---
> > drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 11 ++++++++++-
> > 1 file changed, 10 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > index 886449e88502..a9ba02be378b 100644
> > --- a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > +++ b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > @@ -254,6 +254,14 @@ static int vdpasim_net_dev_add(struct
> > vdpa_mgmt_dev *mdev, const char *name,
> > dev_attr.work_fn = vdpasim_net_work;
> > dev_attr.buffer_size = PAGE_SIZE;
> >
> > + if (config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) {
> > + if (config->device_features &
> > + ~dev_attr.supported_features)
> > + return -EINVAL;
> > + dev_attr.supported_features &=
> > + config->device_features;
> > + }
> > +
> > simdev = vdpasim_create(&dev_attr);
> > if (IS_ERR(simdev))
> > return PTR_ERR(simdev);
> > @@ -294,7 +302,8 @@ static struct vdpa_mgmt_dev mgmt_dev = {
> > .id_table = id_table,
> > .ops = &vdpasim_net_mgmtdev_ops,
> > .config_attr_mask = (1 << VDPA_ATTR_DEV_NET_CFG_MACADDR |
> > - 1 << VDPA_ATTR_DEV_NET_CFG_MTU),
> > + 1 << VDPA_ATTR_DEV_NET_CFG_MTU |
> > + 1 << VDPA_ATTR_DEV_FEATURES),
> > .max_supported_vqs = VDPASIM_NET_VQ_NUM,
> > .supported_features = VDPASIM_NET_FEATURES,
> > };
> > --
> > 2.25.1
>
_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
^ permalink raw reply [flat|nested] 55+ messages in thread
* RE: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
2022-09-22 7:29 ` Michael S. Tsirkin
(?)
@ 2022-09-22 7:47 ` Eli Cohen
2022-09-22 7:53 ` Michael S. Tsirkin
-1 siblings, 1 reply; 55+ messages in thread
From: Eli Cohen @ 2022-09-22 7:47 UTC (permalink / raw)
To: Michael S. Tsirkin
Cc: Jason Wang, si-wei.liu, Parav Pandit, wuzongyong, virtualization,
linux-kernel, eperezma, lingshan.zhu, gdawar, lulu, xieyongji
> -----Original Message-----
> From: Michael S. Tsirkin <mst@redhat.com>
> Sent: Thursday, 22 September 2022 10:30
> To: Eli Cohen <elic@nvidia.com>
> Cc: Jason Wang <jasowang@redhat.com>; si-wei.liu@oracle.com; Parav
> Pandit <parav@nvidia.com>; wuzongyong@linux.alibaba.com;
> virtualization@lists.linux-foundation.org; linux-kernel@vger.kernel.org;
> eperezma@redhat.com; lingshan.zhu@intel.com; gdawar@xilinx.com;
> lulu@redhat.com; xieyongji@bytedance.com
> Subject: Re: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
>
> On Thu, Sep 22, 2022 at 05:13:59AM +0000, Eli Cohen wrote:
> > > From: Jason Wang <jasowang@redhat.com>
> > > Sent: Thursday, 22 September 2022 5:43
> > > To: mst@redhat.com; jasowang@redhat.com
> > > Cc: Eli Cohen <elic@nvidia.com>; si-wei.liu@oracle.com; Parav Pandit
> > > <parav@nvidia.com>; wuzongyong@linux.alibaba.com;
> > > virtualization@lists.linux-foundation.org; linux-kernel@vger.kernel.org;
> > > eperezma@redhat.com; lingshan.zhu@intel.com; gdawar@xilinx.com;
> > > lulu@redhat.com; xieyongji@bytedance.com
> > > Subject: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
> > >
> > > This patch implements features provisioning for vdpa_sim_net.
> > >
> > > 1) validating the provisioned features to be a subset of the parent
> > > features.
> > > 2) clearing the features that is not wanted by the userspace
> > >
> > > For example:
> > >
> > > # vdpa mgmtdev show
> > > vdpasim_net:
> > > supported_classes net
> > > max_supported_vqs 3
> > > dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT
> > > VERSION_1 ACCESS_PLATFORM
> > >
> > > 1) provision vDPA device with all features that are supported by the
> > > net simulator
> > >
> > > # vdpa dev add name dev1 mgmtdev vdpasim_net
> > > # vdpa dev config show
> > > dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> > > negotiated_features MTU MAC CTRL_VQ CTRL_MAC_ADDR VERSION_1
> > > ACCESS_PLATFORM
> > >
> > > 2) provision vDPA device with a subset of the features
> > >
> > > # vdpa dev add name dev1 mgmtdev vdpasim_net device_features
> > > 0x300020000
> >
> > How about "features_mask" instead of "device_features"? Could avoid
> confusion.
>
> Not sure I agree.
> features_mask to me would mean it is & with features. Not the case here.
>
See the code below
@@ -254,6 +254,14 @@ static int vdpasim_net_dev_add(struct vdpa_mgmt_dev *mdev, const char *name,
dev_attr.work_fn = vdpasim_net_work;
dev_attr.buffer_size = PAGE_SIZE;
+ if (config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) {
+ if (config->device_features &
+ ~dev_attr.supported_features)
+ return -EINVAL;
+ dev_attr.supported_features &=
+ config->device_features;
+ }
+
> > > # vdpa dev config show
> > > dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> > > negotiated_features CTRL_VQ VERSION_1 ACCESS_PLATFORM
> > >
> > > Reviewed-by: Eli Cohen <elic@nvidia.com>
> > > Signed-off-by: Jason Wang <jasowang@redhat.com>
> > > ---
> > > drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 11 ++++++++++-
> > > 1 file changed, 10 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > > b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > > index 886449e88502..a9ba02be378b 100644
> > > --- a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > > +++ b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > > @@ -254,6 +254,14 @@ static int vdpasim_net_dev_add(struct
> > > vdpa_mgmt_dev *mdev, const char *name,
> > > dev_attr.work_fn = vdpasim_net_work;
> > > dev_attr.buffer_size = PAGE_SIZE;
> > >
> > > + if (config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) {
> > > + if (config->device_features &
> > > + ~dev_attr.supported_features)
> > > + return -EINVAL;
> > > + dev_attr.supported_features &=
> > > + config->device_features;
> > > + }
> > > +
> > > simdev = vdpasim_create(&dev_attr);
> > > if (IS_ERR(simdev))
> > > return PTR_ERR(simdev);
> > > @@ -294,7 +302,8 @@ static struct vdpa_mgmt_dev mgmt_dev = {
> > > .id_table = id_table,
> > > .ops = &vdpasim_net_mgmtdev_ops,
> > > .config_attr_mask = (1 << VDPA_ATTR_DEV_NET_CFG_MACADDR |
> > > - 1 << VDPA_ATTR_DEV_NET_CFG_MTU),
> > > + 1 << VDPA_ATTR_DEV_NET_CFG_MTU |
> > > + 1 << VDPA_ATTR_DEV_FEATURES),
> > > .max_supported_vqs = VDPASIM_NET_VQ_NUM,
> > > .supported_features = VDPASIM_NET_FEATURES,
> > > };
> > > --
> > > 2.25.1
> >
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
2022-09-22 7:47 ` Eli Cohen
@ 2022-09-22 7:53 ` Michael S. Tsirkin
0 siblings, 0 replies; 55+ messages in thread
From: Michael S. Tsirkin @ 2022-09-22 7:53 UTC (permalink / raw)
To: Eli Cohen
Cc: Jason Wang, si-wei.liu, Parav Pandit, wuzongyong, virtualization,
linux-kernel, eperezma, lingshan.zhu, gdawar, lulu, xieyongji
On Thu, Sep 22, 2022 at 07:47:40AM +0000, Eli Cohen wrote:
>
>
> > -----Original Message-----
> > From: Michael S. Tsirkin <mst@redhat.com>
> > Sent: Thursday, 22 September 2022 10:30
> > To: Eli Cohen <elic@nvidia.com>
> > Cc: Jason Wang <jasowang@redhat.com>; si-wei.liu@oracle.com; Parav
> > Pandit <parav@nvidia.com>; wuzongyong@linux.alibaba.com;
> > virtualization@lists.linux-foundation.org; linux-kernel@vger.kernel.org;
> > eperezma@redhat.com; lingshan.zhu@intel.com; gdawar@xilinx.com;
> > lulu@redhat.com; xieyongji@bytedance.com
> > Subject: Re: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
> >
> > On Thu, Sep 22, 2022 at 05:13:59AM +0000, Eli Cohen wrote:
> > > > From: Jason Wang <jasowang@redhat.com>
> > > > Sent: Thursday, 22 September 2022 5:43
> > > > To: mst@redhat.com; jasowang@redhat.com
> > > > Cc: Eli Cohen <elic@nvidia.com>; si-wei.liu@oracle.com; Parav Pandit
> > > > <parav@nvidia.com>; wuzongyong@linux.alibaba.com;
> > > > virtualization@lists.linux-foundation.org; linux-kernel@vger.kernel.org;
> > > > eperezma@redhat.com; lingshan.zhu@intel.com; gdawar@xilinx.com;
> > > > lulu@redhat.com; xieyongji@bytedance.com
> > > > Subject: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
> > > >
> > > > This patch implements features provisioning for vdpa_sim_net.
> > > >
> > > > 1) validating the provisioned features to be a subset of the parent
> > > > features.
> > > > 2) clearing the features that is not wanted by the userspace
> > > >
> > > > For example:
> > > >
> > > > # vdpa mgmtdev show
> > > > vdpasim_net:
> > > > supported_classes net
> > > > max_supported_vqs 3
> > > > dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT
> > > > VERSION_1 ACCESS_PLATFORM
> > > >
> > > > 1) provision vDPA device with all features that are supported by the
> > > > net simulator
> > > >
> > > > # vdpa dev add name dev1 mgmtdev vdpasim_net
> > > > # vdpa dev config show
> > > > dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> > > > negotiated_features MTU MAC CTRL_VQ CTRL_MAC_ADDR VERSION_1
> > > > ACCESS_PLATFORM
> > > >
> > > > 2) provision vDPA device with a subset of the features
> > > >
> > > > # vdpa dev add name dev1 mgmtdev vdpasim_net device_features
> > > > 0x300020000
> > >
> > > How about "features_mask" instead of "device_features"? Could avoid
> > confusion.
> >
> > Not sure I agree.
> > features_mask to me would mean it is & with features. Not the case here.
> >
>
>
> See the code below
>
> @@ -254,6 +254,14 @@ static int vdpasim_net_dev_add(struct vdpa_mgmt_dev *mdev, const char *name,
> dev_attr.work_fn = vdpasim_net_work;
> dev_attr.buffer_size = PAGE_SIZE;
>
> + if (config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) {
> + if (config->device_features &
> + ~dev_attr.supported_features)
> + return -EINVAL;
> + dev_attr.supported_features &=
> + config->device_features;
> + }
> +
Oh I didn't notice. It's unnecessary, isn't it?
Can just equivalently be
dev_attr.supported_features = config->device_features;
right?
> > > > # vdpa dev config show
> > > > dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> > > > negotiated_features CTRL_VQ VERSION_1 ACCESS_PLATFORM
> > > >
> > > > Reviewed-by: Eli Cohen <elic@nvidia.com>
> > > > Signed-off-by: Jason Wang <jasowang@redhat.com>
> > > > ---
> > > > drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 11 ++++++++++-
> > > > 1 file changed, 10 insertions(+), 1 deletion(-)
> > > >
> > > > diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > > > b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > > > index 886449e88502..a9ba02be378b 100644
> > > > --- a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > > > +++ b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > > > @@ -254,6 +254,14 @@ static int vdpasim_net_dev_add(struct
> > > > vdpa_mgmt_dev *mdev, const char *name,
> > > > dev_attr.work_fn = vdpasim_net_work;
> > > > dev_attr.buffer_size = PAGE_SIZE;
> > > >
> > > > + if (config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) {
> > > > + if (config->device_features &
> > > > + ~dev_attr.supported_features)
> > > > + return -EINVAL;
> > > > + dev_attr.supported_features &=
> > > > + config->device_features;
> > > > + }
> > > > +
> > > > simdev = vdpasim_create(&dev_attr);
> > > > if (IS_ERR(simdev))
> > > > return PTR_ERR(simdev);
> > > > @@ -294,7 +302,8 @@ static struct vdpa_mgmt_dev mgmt_dev = {
> > > > .id_table = id_table,
> > > > .ops = &vdpasim_net_mgmtdev_ops,
> > > > .config_attr_mask = (1 << VDPA_ATTR_DEV_NET_CFG_MACADDR |
> > > > - 1 << VDPA_ATTR_DEV_NET_CFG_MTU),
> > > > + 1 << VDPA_ATTR_DEV_NET_CFG_MTU |
> > > > + 1 << VDPA_ATTR_DEV_FEATURES),
> > > > .max_supported_vqs = VDPASIM_NET_VQ_NUM,
> > > > .supported_features = VDPASIM_NET_FEATURES,
> > > > };
> > > > --
> > > > 2.25.1
> > >
>
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
@ 2022-09-22 7:53 ` Michael S. Tsirkin
0 siblings, 0 replies; 55+ messages in thread
From: Michael S. Tsirkin @ 2022-09-22 7:53 UTC (permalink / raw)
To: Eli Cohen
Cc: lulu, xieyongji, linux-kernel, gdawar, virtualization, eperezma,
wuzongyong, lingshan.zhu
On Thu, Sep 22, 2022 at 07:47:40AM +0000, Eli Cohen wrote:
>
>
> > -----Original Message-----
> > From: Michael S. Tsirkin <mst@redhat.com>
> > Sent: Thursday, 22 September 2022 10:30
> > To: Eli Cohen <elic@nvidia.com>
> > Cc: Jason Wang <jasowang@redhat.com>; si-wei.liu@oracle.com; Parav
> > Pandit <parav@nvidia.com>; wuzongyong@linux.alibaba.com;
> > virtualization@lists.linux-foundation.org; linux-kernel@vger.kernel.org;
> > eperezma@redhat.com; lingshan.zhu@intel.com; gdawar@xilinx.com;
> > lulu@redhat.com; xieyongji@bytedance.com
> > Subject: Re: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
> >
> > On Thu, Sep 22, 2022 at 05:13:59AM +0000, Eli Cohen wrote:
> > > > From: Jason Wang <jasowang@redhat.com>
> > > > Sent: Thursday, 22 September 2022 5:43
> > > > To: mst@redhat.com; jasowang@redhat.com
> > > > Cc: Eli Cohen <elic@nvidia.com>; si-wei.liu@oracle.com; Parav Pandit
> > > > <parav@nvidia.com>; wuzongyong@linux.alibaba.com;
> > > > virtualization@lists.linux-foundation.org; linux-kernel@vger.kernel.org;
> > > > eperezma@redhat.com; lingshan.zhu@intel.com; gdawar@xilinx.com;
> > > > lulu@redhat.com; xieyongji@bytedance.com
> > > > Subject: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
> > > >
> > > > This patch implements features provisioning for vdpa_sim_net.
> > > >
> > > > 1) validating the provisioned features to be a subset of the parent
> > > > features.
> > > > 2) clearing the features that is not wanted by the userspace
> > > >
> > > > For example:
> > > >
> > > > # vdpa mgmtdev show
> > > > vdpasim_net:
> > > > supported_classes net
> > > > max_supported_vqs 3
> > > > dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT
> > > > VERSION_1 ACCESS_PLATFORM
> > > >
> > > > 1) provision vDPA device with all features that are supported by the
> > > > net simulator
> > > >
> > > > # vdpa dev add name dev1 mgmtdev vdpasim_net
> > > > # vdpa dev config show
> > > > dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> > > > negotiated_features MTU MAC CTRL_VQ CTRL_MAC_ADDR VERSION_1
> > > > ACCESS_PLATFORM
> > > >
> > > > 2) provision vDPA device with a subset of the features
> > > >
> > > > # vdpa dev add name dev1 mgmtdev vdpasim_net device_features
> > > > 0x300020000
> > >
> > > How about "features_mask" instead of "device_features"? Could avoid
> > confusion.
> >
> > Not sure I agree.
> > features_mask to me would mean it is & with features. Not the case here.
> >
>
>
> See the code below
>
> @@ -254,6 +254,14 @@ static int vdpasim_net_dev_add(struct vdpa_mgmt_dev *mdev, const char *name,
> dev_attr.work_fn = vdpasim_net_work;
> dev_attr.buffer_size = PAGE_SIZE;
>
> + if (config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) {
> + if (config->device_features &
> + ~dev_attr.supported_features)
> + return -EINVAL;
> + dev_attr.supported_features &=
> + config->device_features;
> + }
> +
Oh I didn't notice. It's unnecessary, isn't it?
Can just equivalently be
dev_attr.supported_features = config->device_features;
right?
> > > > # vdpa dev config show
> > > > dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> > > > negotiated_features CTRL_VQ VERSION_1 ACCESS_PLATFORM
> > > >
> > > > Reviewed-by: Eli Cohen <elic@nvidia.com>
> > > > Signed-off-by: Jason Wang <jasowang@redhat.com>
> > > > ---
> > > > drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 11 ++++++++++-
> > > > 1 file changed, 10 insertions(+), 1 deletion(-)
> > > >
> > > > diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > > > b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > > > index 886449e88502..a9ba02be378b 100644
> > > > --- a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > > > +++ b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > > > @@ -254,6 +254,14 @@ static int vdpasim_net_dev_add(struct
> > > > vdpa_mgmt_dev *mdev, const char *name,
> > > > dev_attr.work_fn = vdpasim_net_work;
> > > > dev_attr.buffer_size = PAGE_SIZE;
> > > >
> > > > + if (config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) {
> > > > + if (config->device_features &
> > > > + ~dev_attr.supported_features)
> > > > + return -EINVAL;
> > > > + dev_attr.supported_features &=
> > > > + config->device_features;
> > > > + }
> > > > +
> > > > simdev = vdpasim_create(&dev_attr);
> > > > if (IS_ERR(simdev))
> > > > return PTR_ERR(simdev);
> > > > @@ -294,7 +302,8 @@ static struct vdpa_mgmt_dev mgmt_dev = {
> > > > .id_table = id_table,
> > > > .ops = &vdpasim_net_mgmtdev_ops,
> > > > .config_attr_mask = (1 << VDPA_ATTR_DEV_NET_CFG_MACADDR |
> > > > - 1 << VDPA_ATTR_DEV_NET_CFG_MTU),
> > > > + 1 << VDPA_ATTR_DEV_NET_CFG_MTU |
> > > > + 1 << VDPA_ATTR_DEV_FEATURES),
> > > > .max_supported_vqs = VDPASIM_NET_VQ_NUM,
> > > > .supported_features = VDPASIM_NET_FEATURES,
> > > > };
> > > > --
> > > > 2.25.1
> > >
>
_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
^ permalink raw reply [flat|nested] 55+ messages in thread
* RE: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
2022-09-22 7:53 ` Michael S. Tsirkin
(?)
@ 2022-09-22 8:01 ` Eli Cohen
2022-09-22 9:11 ` Michael S. Tsirkin
-1 siblings, 1 reply; 55+ messages in thread
From: Eli Cohen @ 2022-09-22 8:01 UTC (permalink / raw)
To: Michael S. Tsirkin
Cc: Jason Wang, si-wei.liu, Parav Pandit, wuzongyong, virtualization,
linux-kernel, eperezma, lingshan.zhu, gdawar, lulu, xieyongji
> From: Michael S. Tsirkin <mst@redhat.com>
> Sent: Thursday, 22 September 2022 10:53
> To: Eli Cohen <elic@nvidia.com>
> Cc: Jason Wang <jasowang@redhat.com>; si-wei.liu@oracle.com; Parav
> Pandit <parav@nvidia.com>; wuzongyong@linux.alibaba.com;
> virtualization@lists.linux-foundation.org; linux-kernel@vger.kernel.org;
> eperezma@redhat.com; lingshan.zhu@intel.com; gdawar@xilinx.com;
> lulu@redhat.com; xieyongji@bytedance.com
> Subject: Re: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
>
> On Thu, Sep 22, 2022 at 07:47:40AM +0000, Eli Cohen wrote:
> >
> >
> > > -----Original Message-----
> > > From: Michael S. Tsirkin <mst@redhat.com>
> > > Sent: Thursday, 22 September 2022 10:30
> > > To: Eli Cohen <elic@nvidia.com>
> > > Cc: Jason Wang <jasowang@redhat.com>; si-wei.liu@oracle.com; Parav
> > > Pandit <parav@nvidia.com>; wuzongyong@linux.alibaba.com;
> > > virtualization@lists.linux-foundation.org; linux-kernel@vger.kernel.org;
> > > eperezma@redhat.com; lingshan.zhu@intel.com; gdawar@xilinx.com;
> > > lulu@redhat.com; xieyongji@bytedance.com
> > > Subject: Re: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
> > >
> > > On Thu, Sep 22, 2022 at 05:13:59AM +0000, Eli Cohen wrote:
> > > > > From: Jason Wang <jasowang@redhat.com>
> > > > > Sent: Thursday, 22 September 2022 5:43
> > > > > To: mst@redhat.com; jasowang@redhat.com
> > > > > Cc: Eli Cohen <elic@nvidia.com>; si-wei.liu@oracle.com; Parav Pandit
> > > > > <parav@nvidia.com>; wuzongyong@linux.alibaba.com;
> > > > > virtualization@lists.linux-foundation.org; linux-
> kernel@vger.kernel.org;
> > > > > eperezma@redhat.com; lingshan.zhu@intel.com;
> gdawar@xilinx.com;
> > > > > lulu@redhat.com; xieyongji@bytedance.com
> > > > > Subject: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
> > > > >
> > > > > This patch implements features provisioning for vdpa_sim_net.
> > > > >
> > > > > 1) validating the provisioned features to be a subset of the parent
> > > > > features.
> > > > > 2) clearing the features that is not wanted by the userspace
> > > > >
> > > > > For example:
> > > > >
> > > > > # vdpa mgmtdev show
> > > > > vdpasim_net:
> > > > > supported_classes net
> > > > > max_supported_vqs 3
> > > > > dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT
> > > > > VERSION_1 ACCESS_PLATFORM
> > > > >
> > > > > 1) provision vDPA device with all features that are supported by the
> > > > > net simulator
> > > > >
> > > > > # vdpa dev add name dev1 mgmtdev vdpasim_net
> > > > > # vdpa dev config show
> > > > > dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> > > > > negotiated_features MTU MAC CTRL_VQ CTRL_MAC_ADDR
> VERSION_1
> > > > > ACCESS_PLATFORM
> > > > >
> > > > > 2) provision vDPA device with a subset of the features
> > > > >
> > > > > # vdpa dev add name dev1 mgmtdev vdpasim_net device_features
> > > > > 0x300020000
> > > >
> > > > How about "features_mask" instead of "device_features"? Could avoid
> > > confusion.
> > >
> > > Not sure I agree.
> > > features_mask to me would mean it is & with features. Not the case here.
> > >
> >
> >
> > See the code below
> >
> > @@ -254,6 +254,14 @@ static int vdpasim_net_dev_add(struct
> vdpa_mgmt_dev *mdev, const char *name,
> > dev_attr.work_fn = vdpasim_net_work;
> > dev_attr.buffer_size = PAGE_SIZE;
> >
> > + if (config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) {
> > + if (config->device_features &
> > + ~dev_attr.supported_features)
> > + return -EINVAL;
> > + dev_attr.supported_features &=
> > + config->device_features;
> > + }
> > +
>
> Oh I didn't notice. It's unnecessary, isn't it?
> Can just equivalently be
>
> dev_attr.supported_features = config->device_features;
>
> right?
>
I don't think so. You want to mask the set of features that the device will offer but you cannot dictate it.
>
> > > > > # vdpa dev config show
> > > > > dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> > > > > negotiated_features CTRL_VQ VERSION_1 ACCESS_PLATFORM
> > > > >
> > > > > Reviewed-by: Eli Cohen <elic@nvidia.com>
> > > > > Signed-off-by: Jason Wang <jasowang@redhat.com>
> > > > > ---
> > > > > drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 11 ++++++++++-
> > > > > 1 file changed, 10 insertions(+), 1 deletion(-)
> > > > >
> > > > > diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > > > > b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > > > > index 886449e88502..a9ba02be378b 100644
> > > > > --- a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > > > > +++ b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > > > > @@ -254,6 +254,14 @@ static int vdpasim_net_dev_add(struct
> > > > > vdpa_mgmt_dev *mdev, const char *name,
> > > > > dev_attr.work_fn = vdpasim_net_work;
> > > > > dev_attr.buffer_size = PAGE_SIZE;
> > > > >
> > > > > + if (config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) {
> > > > > + if (config->device_features &
> > > > > + ~dev_attr.supported_features)
> > > > > + return -EINVAL;
> > > > > + dev_attr.supported_features &=
> > > > > + config->device_features;
> > > > > + }
> > > > > +
> > > > > simdev = vdpasim_create(&dev_attr);
> > > > > if (IS_ERR(simdev))
> > > > > return PTR_ERR(simdev);
> > > > > @@ -294,7 +302,8 @@ static struct vdpa_mgmt_dev mgmt_dev = {
> > > > > .id_table = id_table,
> > > > > .ops = &vdpasim_net_mgmtdev_ops,
> > > > > .config_attr_mask = (1 << VDPA_ATTR_DEV_NET_CFG_MACADDR |
> > > > > - 1 << VDPA_ATTR_DEV_NET_CFG_MTU),
> > > > > + 1 << VDPA_ATTR_DEV_NET_CFG_MTU |
> > > > > + 1 << VDPA_ATTR_DEV_FEATURES),
> > > > > .max_supported_vqs = VDPASIM_NET_VQ_NUM,
> > > > > .supported_features = VDPASIM_NET_FEATURES,
> > > > > };
> > > > > --
> > > > > 2.25.1
> > > >
> >
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
2022-09-22 8:01 ` Eli Cohen
@ 2022-09-22 9:11 ` Michael S. Tsirkin
0 siblings, 0 replies; 55+ messages in thread
From: Michael S. Tsirkin @ 2022-09-22 9:11 UTC (permalink / raw)
To: Eli Cohen
Cc: Jason Wang, si-wei.liu, Parav Pandit, wuzongyong, virtualization,
linux-kernel, eperezma, lingshan.zhu, gdawar, lulu, xieyongji
On Thu, Sep 22, 2022 at 08:01:23AM +0000, Eli Cohen wrote:
> > From: Michael S. Tsirkin <mst@redhat.com>
> > Sent: Thursday, 22 September 2022 10:53
> > To: Eli Cohen <elic@nvidia.com>
> > Cc: Jason Wang <jasowang@redhat.com>; si-wei.liu@oracle.com; Parav
> > Pandit <parav@nvidia.com>; wuzongyong@linux.alibaba.com;
> > virtualization@lists.linux-foundation.org; linux-kernel@vger.kernel.org;
> > eperezma@redhat.com; lingshan.zhu@intel.com; gdawar@xilinx.com;
> > lulu@redhat.com; xieyongji@bytedance.com
> > Subject: Re: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
> >
> > On Thu, Sep 22, 2022 at 07:47:40AM +0000, Eli Cohen wrote:
> > >
> > >
> > > > -----Original Message-----
> > > > From: Michael S. Tsirkin <mst@redhat.com>
> > > > Sent: Thursday, 22 September 2022 10:30
> > > > To: Eli Cohen <elic@nvidia.com>
> > > > Cc: Jason Wang <jasowang@redhat.com>; si-wei.liu@oracle.com; Parav
> > > > Pandit <parav@nvidia.com>; wuzongyong@linux.alibaba.com;
> > > > virtualization@lists.linux-foundation.org; linux-kernel@vger.kernel.org;
> > > > eperezma@redhat.com; lingshan.zhu@intel.com; gdawar@xilinx.com;
> > > > lulu@redhat.com; xieyongji@bytedance.com
> > > > Subject: Re: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
> > > >
> > > > On Thu, Sep 22, 2022 at 05:13:59AM +0000, Eli Cohen wrote:
> > > > > > From: Jason Wang <jasowang@redhat.com>
> > > > > > Sent: Thursday, 22 September 2022 5:43
> > > > > > To: mst@redhat.com; jasowang@redhat.com
> > > > > > Cc: Eli Cohen <elic@nvidia.com>; si-wei.liu@oracle.com; Parav Pandit
> > > > > > <parav@nvidia.com>; wuzongyong@linux.alibaba.com;
> > > > > > virtualization@lists.linux-foundation.org; linux-
> > kernel@vger.kernel.org;
> > > > > > eperezma@redhat.com; lingshan.zhu@intel.com;
> > gdawar@xilinx.com;
> > > > > > lulu@redhat.com; xieyongji@bytedance.com
> > > > > > Subject: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
> > > > > >
> > > > > > This patch implements features provisioning for vdpa_sim_net.
> > > > > >
> > > > > > 1) validating the provisioned features to be a subset of the parent
> > > > > > features.
> > > > > > 2) clearing the features that is not wanted by the userspace
> > > > > >
> > > > > > For example:
> > > > > >
> > > > > > # vdpa mgmtdev show
> > > > > > vdpasim_net:
> > > > > > supported_classes net
> > > > > > max_supported_vqs 3
> > > > > > dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT
> > > > > > VERSION_1 ACCESS_PLATFORM
> > > > > >
> > > > > > 1) provision vDPA device with all features that are supported by the
> > > > > > net simulator
> > > > > >
> > > > > > # vdpa dev add name dev1 mgmtdev vdpasim_net
> > > > > > # vdpa dev config show
> > > > > > dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> > > > > > negotiated_features MTU MAC CTRL_VQ CTRL_MAC_ADDR
> > VERSION_1
> > > > > > ACCESS_PLATFORM
> > > > > >
> > > > > > 2) provision vDPA device with a subset of the features
> > > > > >
> > > > > > # vdpa dev add name dev1 mgmtdev vdpasim_net device_features
> > > > > > 0x300020000
> > > > >
> > > > > How about "features_mask" instead of "device_features"? Could avoid
> > > > confusion.
> > > >
> > > > Not sure I agree.
> > > > features_mask to me would mean it is & with features. Not the case here.
> > > >
> > >
> > >
> > > See the code below
> > >
> > > @@ -254,6 +254,14 @@ static int vdpasim_net_dev_add(struct
> > vdpa_mgmt_dev *mdev, const char *name,
> > > dev_attr.work_fn = vdpasim_net_work;
> > > dev_attr.buffer_size = PAGE_SIZE;
> > >
> > > + if (config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) {
> > > + if (config->device_features &
> > > + ~dev_attr.supported_features)
> > > + return -EINVAL;
> > > + dev_attr.supported_features &=
> > > + config->device_features;
> > > + }
> > > +
> >
> > Oh I didn't notice. It's unnecessary, isn't it?
> > Can just equivalently be
> >
> > dev_attr.supported_features = config->device_features;
> >
> > right?
> >
>
> I don't think so. You want to mask the set of features that the device will offer but you cannot dictate it.
Sure, but it's already a given because device_features is a subset of
supported_features. Observe:
After this line:
if (config->device_features &
~dev_attr.supported_features)
return -EINVAL;
we know that config->device_features & ~dev_attr.supported_features
is 0.
Therefore logically
config->device_features ==
(config->device_features & ~dev_attr.supported_features) |
(config->device_features & dev_attr.supported_features);
it follows that
config->device_features ==
0 |
(config->device_features & dev_attr.supported_features);
and finally
config->device_features ==
(config->device_features & dev_attr.supported_features);
now
dev_attr.supported_features &=
config->device_features;
is equivalent to
dev_attr.supported_features =
(config->device_features & dev_attr.supported_features);
and therefore to
dev_attr.supported_features = config->device_features;
> >
> > > > > > # vdpa dev config show
> > > > > > dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> > > > > > negotiated_features CTRL_VQ VERSION_1 ACCESS_PLATFORM
> > > > > >
> > > > > > Reviewed-by: Eli Cohen <elic@nvidia.com>
> > > > > > Signed-off-by: Jason Wang <jasowang@redhat.com>
> > > > > > ---
> > > > > > drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 11 ++++++++++-
> > > > > > 1 file changed, 10 insertions(+), 1 deletion(-)
> > > > > >
> > > > > > diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > > > > > b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > > > > > index 886449e88502..a9ba02be378b 100644
> > > > > > --- a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > > > > > +++ b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > > > > > @@ -254,6 +254,14 @@ static int vdpasim_net_dev_add(struct
> > > > > > vdpa_mgmt_dev *mdev, const char *name,
> > > > > > dev_attr.work_fn = vdpasim_net_work;
> > > > > > dev_attr.buffer_size = PAGE_SIZE;
> > > > > >
> > > > > > + if (config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) {
> > > > > > + if (config->device_features &
> > > > > > + ~dev_attr.supported_features)
> > > > > > + return -EINVAL;
> > > > > > + dev_attr.supported_features &=
> > > > > > + config->device_features;
> > > > > > + }
> > > > > > +
> > > > > > simdev = vdpasim_create(&dev_attr);
> > > > > > if (IS_ERR(simdev))
> > > > > > return PTR_ERR(simdev);
> > > > > > @@ -294,7 +302,8 @@ static struct vdpa_mgmt_dev mgmt_dev = {
> > > > > > .id_table = id_table,
> > > > > > .ops = &vdpasim_net_mgmtdev_ops,
> > > > > > .config_attr_mask = (1 << VDPA_ATTR_DEV_NET_CFG_MACADDR |
> > > > > > - 1 << VDPA_ATTR_DEV_NET_CFG_MTU),
> > > > > > + 1 << VDPA_ATTR_DEV_NET_CFG_MTU |
> > > > > > + 1 << VDPA_ATTR_DEV_FEATURES),
> > > > > > .max_supported_vqs = VDPASIM_NET_VQ_NUM,
> > > > > > .supported_features = VDPASIM_NET_FEATURES,
> > > > > > };
> > > > > > --
> > > > > > 2.25.1
> > > > >
> > >
>
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
@ 2022-09-22 9:11 ` Michael S. Tsirkin
0 siblings, 0 replies; 55+ messages in thread
From: Michael S. Tsirkin @ 2022-09-22 9:11 UTC (permalink / raw)
To: Eli Cohen
Cc: lulu, xieyongji, linux-kernel, gdawar, virtualization, eperezma,
wuzongyong, lingshan.zhu
On Thu, Sep 22, 2022 at 08:01:23AM +0000, Eli Cohen wrote:
> > From: Michael S. Tsirkin <mst@redhat.com>
> > Sent: Thursday, 22 September 2022 10:53
> > To: Eli Cohen <elic@nvidia.com>
> > Cc: Jason Wang <jasowang@redhat.com>; si-wei.liu@oracle.com; Parav
> > Pandit <parav@nvidia.com>; wuzongyong@linux.alibaba.com;
> > virtualization@lists.linux-foundation.org; linux-kernel@vger.kernel.org;
> > eperezma@redhat.com; lingshan.zhu@intel.com; gdawar@xilinx.com;
> > lulu@redhat.com; xieyongji@bytedance.com
> > Subject: Re: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
> >
> > On Thu, Sep 22, 2022 at 07:47:40AM +0000, Eli Cohen wrote:
> > >
> > >
> > > > -----Original Message-----
> > > > From: Michael S. Tsirkin <mst@redhat.com>
> > > > Sent: Thursday, 22 September 2022 10:30
> > > > To: Eli Cohen <elic@nvidia.com>
> > > > Cc: Jason Wang <jasowang@redhat.com>; si-wei.liu@oracle.com; Parav
> > > > Pandit <parav@nvidia.com>; wuzongyong@linux.alibaba.com;
> > > > virtualization@lists.linux-foundation.org; linux-kernel@vger.kernel.org;
> > > > eperezma@redhat.com; lingshan.zhu@intel.com; gdawar@xilinx.com;
> > > > lulu@redhat.com; xieyongji@bytedance.com
> > > > Subject: Re: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
> > > >
> > > > On Thu, Sep 22, 2022 at 05:13:59AM +0000, Eli Cohen wrote:
> > > > > > From: Jason Wang <jasowang@redhat.com>
> > > > > > Sent: Thursday, 22 September 2022 5:43
> > > > > > To: mst@redhat.com; jasowang@redhat.com
> > > > > > Cc: Eli Cohen <elic@nvidia.com>; si-wei.liu@oracle.com; Parav Pandit
> > > > > > <parav@nvidia.com>; wuzongyong@linux.alibaba.com;
> > > > > > virtualization@lists.linux-foundation.org; linux-
> > kernel@vger.kernel.org;
> > > > > > eperezma@redhat.com; lingshan.zhu@intel.com;
> > gdawar@xilinx.com;
> > > > > > lulu@redhat.com; xieyongji@bytedance.com
> > > > > > Subject: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
> > > > > >
> > > > > > This patch implements features provisioning for vdpa_sim_net.
> > > > > >
> > > > > > 1) validating the provisioned features to be a subset of the parent
> > > > > > features.
> > > > > > 2) clearing the features that is not wanted by the userspace
> > > > > >
> > > > > > For example:
> > > > > >
> > > > > > # vdpa mgmtdev show
> > > > > > vdpasim_net:
> > > > > > supported_classes net
> > > > > > max_supported_vqs 3
> > > > > > dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT
> > > > > > VERSION_1 ACCESS_PLATFORM
> > > > > >
> > > > > > 1) provision vDPA device with all features that are supported by the
> > > > > > net simulator
> > > > > >
> > > > > > # vdpa dev add name dev1 mgmtdev vdpasim_net
> > > > > > # vdpa dev config show
> > > > > > dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> > > > > > negotiated_features MTU MAC CTRL_VQ CTRL_MAC_ADDR
> > VERSION_1
> > > > > > ACCESS_PLATFORM
> > > > > >
> > > > > > 2) provision vDPA device with a subset of the features
> > > > > >
> > > > > > # vdpa dev add name dev1 mgmtdev vdpasim_net device_features
> > > > > > 0x300020000
> > > > >
> > > > > How about "features_mask" instead of "device_features"? Could avoid
> > > > confusion.
> > > >
> > > > Not sure I agree.
> > > > features_mask to me would mean it is & with features. Not the case here.
> > > >
> > >
> > >
> > > See the code below
> > >
> > > @@ -254,6 +254,14 @@ static int vdpasim_net_dev_add(struct
> > vdpa_mgmt_dev *mdev, const char *name,
> > > dev_attr.work_fn = vdpasim_net_work;
> > > dev_attr.buffer_size = PAGE_SIZE;
> > >
> > > + if (config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) {
> > > + if (config->device_features &
> > > + ~dev_attr.supported_features)
> > > + return -EINVAL;
> > > + dev_attr.supported_features &=
> > > + config->device_features;
> > > + }
> > > +
> >
> > Oh I didn't notice. It's unnecessary, isn't it?
> > Can just equivalently be
> >
> > dev_attr.supported_features = config->device_features;
> >
> > right?
> >
>
> I don't think so. You want to mask the set of features that the device will offer but you cannot dictate it.
Sure, but it's already a given because device_features is a subset of
supported_features. Observe:
After this line:
if (config->device_features &
~dev_attr.supported_features)
return -EINVAL;
we know that config->device_features & ~dev_attr.supported_features
is 0.
Therefore logically
config->device_features ==
(config->device_features & ~dev_attr.supported_features) |
(config->device_features & dev_attr.supported_features);
it follows that
config->device_features ==
0 |
(config->device_features & dev_attr.supported_features);
and finally
config->device_features ==
(config->device_features & dev_attr.supported_features);
now
dev_attr.supported_features &=
config->device_features;
is equivalent to
dev_attr.supported_features =
(config->device_features & dev_attr.supported_features);
and therefore to
dev_attr.supported_features = config->device_features;
> >
> > > > > > # vdpa dev config show
> > > > > > dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> > > > > > negotiated_features CTRL_VQ VERSION_1 ACCESS_PLATFORM
> > > > > >
> > > > > > Reviewed-by: Eli Cohen <elic@nvidia.com>
> > > > > > Signed-off-by: Jason Wang <jasowang@redhat.com>
> > > > > > ---
> > > > > > drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 11 ++++++++++-
> > > > > > 1 file changed, 10 insertions(+), 1 deletion(-)
> > > > > >
> > > > > > diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > > > > > b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > > > > > index 886449e88502..a9ba02be378b 100644
> > > > > > --- a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > > > > > +++ b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > > > > > @@ -254,6 +254,14 @@ static int vdpasim_net_dev_add(struct
> > > > > > vdpa_mgmt_dev *mdev, const char *name,
> > > > > > dev_attr.work_fn = vdpasim_net_work;
> > > > > > dev_attr.buffer_size = PAGE_SIZE;
> > > > > >
> > > > > > + if (config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) {
> > > > > > + if (config->device_features &
> > > > > > + ~dev_attr.supported_features)
> > > > > > + return -EINVAL;
> > > > > > + dev_attr.supported_features &=
> > > > > > + config->device_features;
> > > > > > + }
> > > > > > +
> > > > > > simdev = vdpasim_create(&dev_attr);
> > > > > > if (IS_ERR(simdev))
> > > > > > return PTR_ERR(simdev);
> > > > > > @@ -294,7 +302,8 @@ static struct vdpa_mgmt_dev mgmt_dev = {
> > > > > > .id_table = id_table,
> > > > > > .ops = &vdpasim_net_mgmtdev_ops,
> > > > > > .config_attr_mask = (1 << VDPA_ATTR_DEV_NET_CFG_MACADDR |
> > > > > > - 1 << VDPA_ATTR_DEV_NET_CFG_MTU),
> > > > > > + 1 << VDPA_ATTR_DEV_NET_CFG_MTU |
> > > > > > + 1 << VDPA_ATTR_DEV_FEATURES),
> > > > > > .max_supported_vqs = VDPASIM_NET_VQ_NUM,
> > > > > > .supported_features = VDPASIM_NET_FEATURES,
> > > > > > };
> > > > > > --
> > > > > > 2.25.1
> > > > >
> > >
>
_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
2022-09-22 2:43 ` Jason Wang
@ 2022-09-22 9:22 ` Stefano Garzarella
-1 siblings, 0 replies; 55+ messages in thread
From: Stefano Garzarella @ 2022-09-22 9:22 UTC (permalink / raw)
To: Jason Wang
Cc: mst, lulu, xieyongji, linux-kernel, gdawar, virtualization,
eperezma, wuzongyong, elic, lingshan.zhu
On Thu, Sep 22, 2022 at 10:43:04AM +0800, Jason Wang wrote:
>This patch implements features provisioning for vdpa_sim_net.
>
>1) validating the provisioned features to be a subset of the parent
> features.
>2) clearing the features that is not wanted by the userspace
>
>For example:
>
># vdpa mgmtdev show
>vdpasim_net:
> supported_classes net
> max_supported_vqs 3
> dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM
>
>1) provision vDPA device with all features that are supported by the
> net simulator
>
># vdpa dev add name dev1 mgmtdev vdpasim_net
># vdpa dev config show
>dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> negotiated_features MTU MAC CTRL_VQ CTRL_MAC_ADDR VERSION_1 ACCESS_PLATFORM
>
>2) provision vDPA device with a subset of the features
>
># vdpa dev add name dev1 mgmtdev vdpasim_net device_features 0x300020000
># vdpa dev config show
>dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> negotiated_features CTRL_VQ VERSION_1 ACCESS_PLATFORM
>
>Reviewed-by: Eli Cohen <elic@nvidia.com>
>Signed-off-by: Jason Wang <jasowang@redhat.com>
>---
> drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 11 ++++++++++-
> 1 file changed, 10 insertions(+), 1 deletion(-)
>
>diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
>index 886449e88502..a9ba02be378b 100644
>--- a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
>+++ b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
>@@ -254,6 +254,14 @@ static int vdpasim_net_dev_add(struct vdpa_mgmt_dev *mdev, const char *name,
> dev_attr.work_fn = vdpasim_net_work;
> dev_attr.buffer_size = PAGE_SIZE;
>
>+ if (config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) {
>+ if (config->device_features &
>+ ~dev_attr.supported_features)
>+ return -EINVAL;
>+ dev_attr.supported_features &=
>+ config->device_features;
>+ }
>+
How about doing this inside vdpasim_create()?
That way we support this feature in all simulators.
Thanks,
Stefano
> simdev = vdpasim_create(&dev_attr);
> if (IS_ERR(simdev))
> return PTR_ERR(simdev);
>@@ -294,7 +302,8 @@ static struct vdpa_mgmt_dev mgmt_dev = {
> .id_table = id_table,
> .ops = &vdpasim_net_mgmtdev_ops,
> .config_attr_mask = (1 << VDPA_ATTR_DEV_NET_CFG_MACADDR |
>- 1 << VDPA_ATTR_DEV_NET_CFG_MTU),
>+ 1 << VDPA_ATTR_DEV_NET_CFG_MTU |
>+ 1 << VDPA_ATTR_DEV_FEATURES),
> .max_supported_vqs = VDPASIM_NET_VQ_NUM,
> .supported_features = VDPASIM_NET_FEATURES,
> };
>--
>2.25.1
>
>_______________________________________________
>Virtualization mailing list
>Virtualization@lists.linux-foundation.org
>https://lists.linuxfoundation.org/mailman/listinfo/virtualization
>
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
@ 2022-09-22 9:22 ` Stefano Garzarella
0 siblings, 0 replies; 55+ messages in thread
From: Stefano Garzarella @ 2022-09-22 9:22 UTC (permalink / raw)
To: Jason Wang
Cc: lulu, mst, linux-kernel, gdawar, virtualization, xieyongji,
wuzongyong, elic, eperezma, lingshan.zhu
On Thu, Sep 22, 2022 at 10:43:04AM +0800, Jason Wang wrote:
>This patch implements features provisioning for vdpa_sim_net.
>
>1) validating the provisioned features to be a subset of the parent
> features.
>2) clearing the features that is not wanted by the userspace
>
>For example:
>
># vdpa mgmtdev show
>vdpasim_net:
> supported_classes net
> max_supported_vqs 3
> dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM
>
>1) provision vDPA device with all features that are supported by the
> net simulator
>
># vdpa dev add name dev1 mgmtdev vdpasim_net
># vdpa dev config show
>dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> negotiated_features MTU MAC CTRL_VQ CTRL_MAC_ADDR VERSION_1 ACCESS_PLATFORM
>
>2) provision vDPA device with a subset of the features
>
># vdpa dev add name dev1 mgmtdev vdpasim_net device_features 0x300020000
># vdpa dev config show
>dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> negotiated_features CTRL_VQ VERSION_1 ACCESS_PLATFORM
>
>Reviewed-by: Eli Cohen <elic@nvidia.com>
>Signed-off-by: Jason Wang <jasowang@redhat.com>
>---
> drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 11 ++++++++++-
> 1 file changed, 10 insertions(+), 1 deletion(-)
>
>diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
>index 886449e88502..a9ba02be378b 100644
>--- a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
>+++ b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
>@@ -254,6 +254,14 @@ static int vdpasim_net_dev_add(struct vdpa_mgmt_dev *mdev, const char *name,
> dev_attr.work_fn = vdpasim_net_work;
> dev_attr.buffer_size = PAGE_SIZE;
>
>+ if (config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) {
>+ if (config->device_features &
>+ ~dev_attr.supported_features)
>+ return -EINVAL;
>+ dev_attr.supported_features &=
>+ config->device_features;
>+ }
>+
How about doing this inside vdpasim_create()?
That way we support this feature in all simulators.
Thanks,
Stefano
> simdev = vdpasim_create(&dev_attr);
> if (IS_ERR(simdev))
> return PTR_ERR(simdev);
>@@ -294,7 +302,8 @@ static struct vdpa_mgmt_dev mgmt_dev = {
> .id_table = id_table,
> .ops = &vdpasim_net_mgmtdev_ops,
> .config_attr_mask = (1 << VDPA_ATTR_DEV_NET_CFG_MACADDR |
>- 1 << VDPA_ATTR_DEV_NET_CFG_MTU),
>+ 1 << VDPA_ATTR_DEV_NET_CFG_MTU |
>+ 1 << VDPA_ATTR_DEV_FEATURES),
> .max_supported_vqs = VDPASIM_NET_VQ_NUM,
> .supported_features = VDPASIM_NET_FEATURES,
> };
>--
>2.25.1
>
>_______________________________________________
>Virtualization mailing list
>Virtualization@lists.linux-foundation.org
>https://lists.linuxfoundation.org/mailman/listinfo/virtualization
>
_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
2022-09-22 9:22 ` Stefano Garzarella
@ 2022-09-23 3:33 ` Jason Wang
-1 siblings, 0 replies; 55+ messages in thread
From: Jason Wang @ 2022-09-23 3:33 UTC (permalink / raw)
To: Stefano Garzarella
Cc: mst, Cindy Lu, Yongji Xie, linux-kernel, Gautam Dawar,
virtualization, eperezma, Wu Zongyong, Eli Cohen, Zhu Lingshan
On Thu, Sep 22, 2022 at 5:23 PM Stefano Garzarella <sgarzare@redhat.com> wrote:
>
> On Thu, Sep 22, 2022 at 10:43:04AM +0800, Jason Wang wrote:
> >This patch implements features provisioning for vdpa_sim_net.
> >
> >1) validating the provisioned features to be a subset of the parent
> > features.
> >2) clearing the features that is not wanted by the userspace
> >
> >For example:
> >
> ># vdpa mgmtdev show
> >vdpasim_net:
> > supported_classes net
> > max_supported_vqs 3
> > dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM
> >
> >1) provision vDPA device with all features that are supported by the
> > net simulator
> >
> ># vdpa dev add name dev1 mgmtdev vdpasim_net
> ># vdpa dev config show
> >dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> > negotiated_features MTU MAC CTRL_VQ CTRL_MAC_ADDR VERSION_1 ACCESS_PLATFORM
> >
> >2) provision vDPA device with a subset of the features
> >
> ># vdpa dev add name dev1 mgmtdev vdpasim_net device_features 0x300020000
> ># vdpa dev config show
> >dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> > negotiated_features CTRL_VQ VERSION_1 ACCESS_PLATFORM
> >
> >Reviewed-by: Eli Cohen <elic@nvidia.com>
> >Signed-off-by: Jason Wang <jasowang@redhat.com>
> >---
> > drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 11 ++++++++++-
> > 1 file changed, 10 insertions(+), 1 deletion(-)
> >
> >diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> >index 886449e88502..a9ba02be378b 100644
> >--- a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> >+++ b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> >@@ -254,6 +254,14 @@ static int vdpasim_net_dev_add(struct vdpa_mgmt_dev *mdev, const char *name,
> > dev_attr.work_fn = vdpasim_net_work;
> > dev_attr.buffer_size = PAGE_SIZE;
> >
> >+ if (config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) {
> >+ if (config->device_features &
> >+ ~dev_attr.supported_features)
> >+ return -EINVAL;
> >+ dev_attr.supported_features &=
> >+ config->device_features;
> >+ }
> >+
>
> How about doing this inside vdpasim_create()?
>
> That way we support this feature in all simulators.
Yes, let me do that in the next version.
Thanks
>
> Thanks,
> Stefano
>
> > simdev = vdpasim_create(&dev_attr);
> > if (IS_ERR(simdev))
> > return PTR_ERR(simdev);
> >@@ -294,7 +302,8 @@ static struct vdpa_mgmt_dev mgmt_dev = {
> > .id_table = id_table,
> > .ops = &vdpasim_net_mgmtdev_ops,
> > .config_attr_mask = (1 << VDPA_ATTR_DEV_NET_CFG_MACADDR |
> >- 1 << VDPA_ATTR_DEV_NET_CFG_MTU),
> >+ 1 << VDPA_ATTR_DEV_NET_CFG_MTU |
> >+ 1 << VDPA_ATTR_DEV_FEATURES),
> > .max_supported_vqs = VDPASIM_NET_VQ_NUM,
> > .supported_features = VDPASIM_NET_FEATURES,
> > };
> >--
> >2.25.1
> >
> >_______________________________________________
> >Virtualization mailing list
> >Virtualization@lists.linux-foundation.org
> >https://lists.linuxfoundation.org/mailman/listinfo/virtualization
> >
>
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
@ 2022-09-23 3:33 ` Jason Wang
0 siblings, 0 replies; 55+ messages in thread
From: Jason Wang @ 2022-09-23 3:33 UTC (permalink / raw)
To: Stefano Garzarella
Cc: Cindy Lu, mst, linux-kernel, Gautam Dawar, virtualization,
Yongji Xie, Wu Zongyong, Eli Cohen, eperezma, Zhu Lingshan
On Thu, Sep 22, 2022 at 5:23 PM Stefano Garzarella <sgarzare@redhat.com> wrote:
>
> On Thu, Sep 22, 2022 at 10:43:04AM +0800, Jason Wang wrote:
> >This patch implements features provisioning for vdpa_sim_net.
> >
> >1) validating the provisioned features to be a subset of the parent
> > features.
> >2) clearing the features that is not wanted by the userspace
> >
> >For example:
> >
> ># vdpa mgmtdev show
> >vdpasim_net:
> > supported_classes net
> > max_supported_vqs 3
> > dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM
> >
> >1) provision vDPA device with all features that are supported by the
> > net simulator
> >
> ># vdpa dev add name dev1 mgmtdev vdpasim_net
> ># vdpa dev config show
> >dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> > negotiated_features MTU MAC CTRL_VQ CTRL_MAC_ADDR VERSION_1 ACCESS_PLATFORM
> >
> >2) provision vDPA device with a subset of the features
> >
> ># vdpa dev add name dev1 mgmtdev vdpasim_net device_features 0x300020000
> ># vdpa dev config show
> >dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> > negotiated_features CTRL_VQ VERSION_1 ACCESS_PLATFORM
> >
> >Reviewed-by: Eli Cohen <elic@nvidia.com>
> >Signed-off-by: Jason Wang <jasowang@redhat.com>
> >---
> > drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 11 ++++++++++-
> > 1 file changed, 10 insertions(+), 1 deletion(-)
> >
> >diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> >index 886449e88502..a9ba02be378b 100644
> >--- a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> >+++ b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> >@@ -254,6 +254,14 @@ static int vdpasim_net_dev_add(struct vdpa_mgmt_dev *mdev, const char *name,
> > dev_attr.work_fn = vdpasim_net_work;
> > dev_attr.buffer_size = PAGE_SIZE;
> >
> >+ if (config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) {
> >+ if (config->device_features &
> >+ ~dev_attr.supported_features)
> >+ return -EINVAL;
> >+ dev_attr.supported_features &=
> >+ config->device_features;
> >+ }
> >+
>
> How about doing this inside vdpasim_create()?
>
> That way we support this feature in all simulators.
Yes, let me do that in the next version.
Thanks
>
> Thanks,
> Stefano
>
> > simdev = vdpasim_create(&dev_attr);
> > if (IS_ERR(simdev))
> > return PTR_ERR(simdev);
> >@@ -294,7 +302,8 @@ static struct vdpa_mgmt_dev mgmt_dev = {
> > .id_table = id_table,
> > .ops = &vdpasim_net_mgmtdev_ops,
> > .config_attr_mask = (1 << VDPA_ATTR_DEV_NET_CFG_MACADDR |
> >- 1 << VDPA_ATTR_DEV_NET_CFG_MTU),
> >+ 1 << VDPA_ATTR_DEV_NET_CFG_MTU |
> >+ 1 << VDPA_ATTR_DEV_FEATURES),
> > .max_supported_vqs = VDPASIM_NET_VQ_NUM,
> > .supported_features = VDPASIM_NET_FEATURES,
> > };
> >--
> >2.25.1
> >
> >_______________________________________________
> >Virtualization mailing list
> >Virtualization@lists.linux-foundation.org
> >https://lists.linuxfoundation.org/mailman/listinfo/virtualization
> >
>
_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
2022-09-22 9:11 ` Michael S. Tsirkin
@ 2022-09-23 4:17 ` Jason Wang
-1 siblings, 0 replies; 55+ messages in thread
From: Jason Wang @ 2022-09-23 4:17 UTC (permalink / raw)
To: Michael S. Tsirkin
Cc: Eli Cohen, si-wei.liu, Parav Pandit, wuzongyong, virtualization,
linux-kernel, eperezma, lingshan.zhu, gdawar, lulu, xieyongji
On Thu, Sep 22, 2022 at 5:12 PM Michael S. Tsirkin <mst@redhat.com> wrote:
>
> On Thu, Sep 22, 2022 at 08:01:23AM +0000, Eli Cohen wrote:
> > > From: Michael S. Tsirkin <mst@redhat.com>
> > > Sent: Thursday, 22 September 2022 10:53
> > > To: Eli Cohen <elic@nvidia.com>
> > > Cc: Jason Wang <jasowang@redhat.com>; si-wei.liu@oracle.com; Parav
> > > Pandit <parav@nvidia.com>; wuzongyong@linux.alibaba.com;
> > > virtualization@lists.linux-foundation.org; linux-kernel@vger.kernel.org;
> > > eperezma@redhat.com; lingshan.zhu@intel.com; gdawar@xilinx.com;
> > > lulu@redhat.com; xieyongji@bytedance.com
> > > Subject: Re: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
> > >
> > > On Thu, Sep 22, 2022 at 07:47:40AM +0000, Eli Cohen wrote:
> > > >
> > > >
> > > > > -----Original Message-----
> > > > > From: Michael S. Tsirkin <mst@redhat.com>
> > > > > Sent: Thursday, 22 September 2022 10:30
> > > > > To: Eli Cohen <elic@nvidia.com>
> > > > > Cc: Jason Wang <jasowang@redhat.com>; si-wei.liu@oracle.com; Parav
> > > > > Pandit <parav@nvidia.com>; wuzongyong@linux.alibaba.com;
> > > > > virtualization@lists.linux-foundation.org; linux-kernel@vger.kernel.org;
> > > > > eperezma@redhat.com; lingshan.zhu@intel.com; gdawar@xilinx.com;
> > > > > lulu@redhat.com; xieyongji@bytedance.com
> > > > > Subject: Re: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
> > > > >
> > > > > On Thu, Sep 22, 2022 at 05:13:59AM +0000, Eli Cohen wrote:
> > > > > > > From: Jason Wang <jasowang@redhat.com>
> > > > > > > Sent: Thursday, 22 September 2022 5:43
> > > > > > > To: mst@redhat.com; jasowang@redhat.com
> > > > > > > Cc: Eli Cohen <elic@nvidia.com>; si-wei.liu@oracle.com; Parav Pandit
> > > > > > > <parav@nvidia.com>; wuzongyong@linux.alibaba.com;
> > > > > > > virtualization@lists.linux-foundation.org; linux-
> > > kernel@vger.kernel.org;
> > > > > > > eperezma@redhat.com; lingshan.zhu@intel.com;
> > > gdawar@xilinx.com;
> > > > > > > lulu@redhat.com; xieyongji@bytedance.com
> > > > > > > Subject: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
> > > > > > >
> > > > > > > This patch implements features provisioning for vdpa_sim_net.
> > > > > > >
> > > > > > > 1) validating the provisioned features to be a subset of the parent
> > > > > > > features.
> > > > > > > 2) clearing the features that is not wanted by the userspace
> > > > > > >
> > > > > > > For example:
> > > > > > >
> > > > > > > # vdpa mgmtdev show
> > > > > > > vdpasim_net:
> > > > > > > supported_classes net
> > > > > > > max_supported_vqs 3
> > > > > > > dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT
> > > > > > > VERSION_1 ACCESS_PLATFORM
> > > > > > >
> > > > > > > 1) provision vDPA device with all features that are supported by the
> > > > > > > net simulator
> > > > > > >
> > > > > > > # vdpa dev add name dev1 mgmtdev vdpasim_net
> > > > > > > # vdpa dev config show
> > > > > > > dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> > > > > > > negotiated_features MTU MAC CTRL_VQ CTRL_MAC_ADDR
> > > VERSION_1
> > > > > > > ACCESS_PLATFORM
> > > > > > >
> > > > > > > 2) provision vDPA device with a subset of the features
> > > > > > >
> > > > > > > # vdpa dev add name dev1 mgmtdev vdpasim_net device_features
> > > > > > > 0x300020000
> > > > > >
> > > > > > How about "features_mask" instead of "device_features"? Could avoid
> > > > > confusion.
> > > > >
> > > > > Not sure I agree.
> > > > > features_mask to me would mean it is & with features. Not the case here.
> > > > >
> > > >
> > > >
> > > > See the code below
> > > >
> > > > @@ -254,6 +254,14 @@ static int vdpasim_net_dev_add(struct
> > > vdpa_mgmt_dev *mdev, const char *name,
> > > > dev_attr.work_fn = vdpasim_net_work;
> > > > dev_attr.buffer_size = PAGE_SIZE;
> > > >
> > > > + if (config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) {
> > > > + if (config->device_features &
> > > > + ~dev_attr.supported_features)
> > > > + return -EINVAL;
> > > > + dev_attr.supported_features &=
> > > > + config->device_features;
> > > > + }
> > > > +
> > >
> > > Oh I didn't notice. It's unnecessary, isn't it?
> > > Can just equivalently be
> > >
> > > dev_attr.supported_features = config->device_features;
> > >
> > > right?
> > >
> >
> > I don't think so. You want to mask the set of features that the device will offer but you cannot dictate it.
>
> Sure, but it's already a given because device_features is a subset of
> supported_features. Observe:
>
> After this line:
>
> if (config->device_features &
> ~dev_attr.supported_features)
> return -EINVAL;
>
> we know that config->device_features & ~dev_attr.supported_features
> is 0.
>
> Therefore logically
>
> config->device_features ==
> (config->device_features & ~dev_attr.supported_features) |
> (config->device_features & dev_attr.supported_features);
>
> it follows that
>
> config->device_features ==
> 0 |
> (config->device_features & dev_attr.supported_features);
>
> and finally
>
> config->device_features ==
> (config->device_features & dev_attr.supported_features);
>
>
> now
>
> dev_attr.supported_features &=
> config->device_features;
>
> is equivalent to
>
> dev_attr.supported_features =
> (config->device_features & dev_attr.supported_features);
>
> and therefore to
>
> dev_attr.supported_features = config->device_features;
Yes, let me do that in the next version.
Thanks
>
>
>
> > >
> > > > > > > # vdpa dev config show
> > > > > > > dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> > > > > > > negotiated_features CTRL_VQ VERSION_1 ACCESS_PLATFORM
> > > > > > >
> > > > > > > Reviewed-by: Eli Cohen <elic@nvidia.com>
> > > > > > > Signed-off-by: Jason Wang <jasowang@redhat.com>
> > > > > > > ---
> > > > > > > drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 11 ++++++++++-
> > > > > > > 1 file changed, 10 insertions(+), 1 deletion(-)
> > > > > > >
> > > > > > > diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > > > > > > b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > > > > > > index 886449e88502..a9ba02be378b 100644
> > > > > > > --- a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > > > > > > +++ b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > > > > > > @@ -254,6 +254,14 @@ static int vdpasim_net_dev_add(struct
> > > > > > > vdpa_mgmt_dev *mdev, const char *name,
> > > > > > > dev_attr.work_fn = vdpasim_net_work;
> > > > > > > dev_attr.buffer_size = PAGE_SIZE;
> > > > > > >
> > > > > > > + if (config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) {
> > > > > > > + if (config->device_features &
> > > > > > > + ~dev_attr.supported_features)
> > > > > > > + return -EINVAL;
> > > > > > > + dev_attr.supported_features &=
> > > > > > > + config->device_features;
> > > > > > > + }
> > > > > > > +
> > > > > > > simdev = vdpasim_create(&dev_attr);
> > > > > > > if (IS_ERR(simdev))
> > > > > > > return PTR_ERR(simdev);
> > > > > > > @@ -294,7 +302,8 @@ static struct vdpa_mgmt_dev mgmt_dev = {
> > > > > > > .id_table = id_table,
> > > > > > > .ops = &vdpasim_net_mgmtdev_ops,
> > > > > > > .config_attr_mask = (1 << VDPA_ATTR_DEV_NET_CFG_MACADDR |
> > > > > > > - 1 << VDPA_ATTR_DEV_NET_CFG_MTU),
> > > > > > > + 1 << VDPA_ATTR_DEV_NET_CFG_MTU |
> > > > > > > + 1 << VDPA_ATTR_DEV_FEATURES),
> > > > > > > .max_supported_vqs = VDPASIM_NET_VQ_NUM,
> > > > > > > .supported_features = VDPASIM_NET_FEATURES,
> > > > > > > };
> > > > > > > --
> > > > > > > 2.25.1
> > > > > >
> > > >
> >
>
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
@ 2022-09-23 4:17 ` Jason Wang
0 siblings, 0 replies; 55+ messages in thread
From: Jason Wang @ 2022-09-23 4:17 UTC (permalink / raw)
To: Michael S. Tsirkin
Cc: lulu, xieyongji, linux-kernel, gdawar, virtualization, eperezma,
wuzongyong, Eli Cohen, lingshan.zhu
On Thu, Sep 22, 2022 at 5:12 PM Michael S. Tsirkin <mst@redhat.com> wrote:
>
> On Thu, Sep 22, 2022 at 08:01:23AM +0000, Eli Cohen wrote:
> > > From: Michael S. Tsirkin <mst@redhat.com>
> > > Sent: Thursday, 22 September 2022 10:53
> > > To: Eli Cohen <elic@nvidia.com>
> > > Cc: Jason Wang <jasowang@redhat.com>; si-wei.liu@oracle.com; Parav
> > > Pandit <parav@nvidia.com>; wuzongyong@linux.alibaba.com;
> > > virtualization@lists.linux-foundation.org; linux-kernel@vger.kernel.org;
> > > eperezma@redhat.com; lingshan.zhu@intel.com; gdawar@xilinx.com;
> > > lulu@redhat.com; xieyongji@bytedance.com
> > > Subject: Re: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
> > >
> > > On Thu, Sep 22, 2022 at 07:47:40AM +0000, Eli Cohen wrote:
> > > >
> > > >
> > > > > -----Original Message-----
> > > > > From: Michael S. Tsirkin <mst@redhat.com>
> > > > > Sent: Thursday, 22 September 2022 10:30
> > > > > To: Eli Cohen <elic@nvidia.com>
> > > > > Cc: Jason Wang <jasowang@redhat.com>; si-wei.liu@oracle.com; Parav
> > > > > Pandit <parav@nvidia.com>; wuzongyong@linux.alibaba.com;
> > > > > virtualization@lists.linux-foundation.org; linux-kernel@vger.kernel.org;
> > > > > eperezma@redhat.com; lingshan.zhu@intel.com; gdawar@xilinx.com;
> > > > > lulu@redhat.com; xieyongji@bytedance.com
> > > > > Subject: Re: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
> > > > >
> > > > > On Thu, Sep 22, 2022 at 05:13:59AM +0000, Eli Cohen wrote:
> > > > > > > From: Jason Wang <jasowang@redhat.com>
> > > > > > > Sent: Thursday, 22 September 2022 5:43
> > > > > > > To: mst@redhat.com; jasowang@redhat.com
> > > > > > > Cc: Eli Cohen <elic@nvidia.com>; si-wei.liu@oracle.com; Parav Pandit
> > > > > > > <parav@nvidia.com>; wuzongyong@linux.alibaba.com;
> > > > > > > virtualization@lists.linux-foundation.org; linux-
> > > kernel@vger.kernel.org;
> > > > > > > eperezma@redhat.com; lingshan.zhu@intel.com;
> > > gdawar@xilinx.com;
> > > > > > > lulu@redhat.com; xieyongji@bytedance.com
> > > > > > > Subject: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
> > > > > > >
> > > > > > > This patch implements features provisioning for vdpa_sim_net.
> > > > > > >
> > > > > > > 1) validating the provisioned features to be a subset of the parent
> > > > > > > features.
> > > > > > > 2) clearing the features that is not wanted by the userspace
> > > > > > >
> > > > > > > For example:
> > > > > > >
> > > > > > > # vdpa mgmtdev show
> > > > > > > vdpasim_net:
> > > > > > > supported_classes net
> > > > > > > max_supported_vqs 3
> > > > > > > dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT
> > > > > > > VERSION_1 ACCESS_PLATFORM
> > > > > > >
> > > > > > > 1) provision vDPA device with all features that are supported by the
> > > > > > > net simulator
> > > > > > >
> > > > > > > # vdpa dev add name dev1 mgmtdev vdpasim_net
> > > > > > > # vdpa dev config show
> > > > > > > dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> > > > > > > negotiated_features MTU MAC CTRL_VQ CTRL_MAC_ADDR
> > > VERSION_1
> > > > > > > ACCESS_PLATFORM
> > > > > > >
> > > > > > > 2) provision vDPA device with a subset of the features
> > > > > > >
> > > > > > > # vdpa dev add name dev1 mgmtdev vdpasim_net device_features
> > > > > > > 0x300020000
> > > > > >
> > > > > > How about "features_mask" instead of "device_features"? Could avoid
> > > > > confusion.
> > > > >
> > > > > Not sure I agree.
> > > > > features_mask to me would mean it is & with features. Not the case here.
> > > > >
> > > >
> > > >
> > > > See the code below
> > > >
> > > > @@ -254,6 +254,14 @@ static int vdpasim_net_dev_add(struct
> > > vdpa_mgmt_dev *mdev, const char *name,
> > > > dev_attr.work_fn = vdpasim_net_work;
> > > > dev_attr.buffer_size = PAGE_SIZE;
> > > >
> > > > + if (config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) {
> > > > + if (config->device_features &
> > > > + ~dev_attr.supported_features)
> > > > + return -EINVAL;
> > > > + dev_attr.supported_features &=
> > > > + config->device_features;
> > > > + }
> > > > +
> > >
> > > Oh I didn't notice. It's unnecessary, isn't it?
> > > Can just equivalently be
> > >
> > > dev_attr.supported_features = config->device_features;
> > >
> > > right?
> > >
> >
> > I don't think so. You want to mask the set of features that the device will offer but you cannot dictate it.
>
> Sure, but it's already a given because device_features is a subset of
> supported_features. Observe:
>
> After this line:
>
> if (config->device_features &
> ~dev_attr.supported_features)
> return -EINVAL;
>
> we know that config->device_features & ~dev_attr.supported_features
> is 0.
>
> Therefore logically
>
> config->device_features ==
> (config->device_features & ~dev_attr.supported_features) |
> (config->device_features & dev_attr.supported_features);
>
> it follows that
>
> config->device_features ==
> 0 |
> (config->device_features & dev_attr.supported_features);
>
> and finally
>
> config->device_features ==
> (config->device_features & dev_attr.supported_features);
>
>
> now
>
> dev_attr.supported_features &=
> config->device_features;
>
> is equivalent to
>
> dev_attr.supported_features =
> (config->device_features & dev_attr.supported_features);
>
> and therefore to
>
> dev_attr.supported_features = config->device_features;
Yes, let me do that in the next version.
Thanks
>
>
>
> > >
> > > > > > > # vdpa dev config show
> > > > > > > dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> > > > > > > negotiated_features CTRL_VQ VERSION_1 ACCESS_PLATFORM
> > > > > > >
> > > > > > > Reviewed-by: Eli Cohen <elic@nvidia.com>
> > > > > > > Signed-off-by: Jason Wang <jasowang@redhat.com>
> > > > > > > ---
> > > > > > > drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 11 ++++++++++-
> > > > > > > 1 file changed, 10 insertions(+), 1 deletion(-)
> > > > > > >
> > > > > > > diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > > > > > > b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > > > > > > index 886449e88502..a9ba02be378b 100644
> > > > > > > --- a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > > > > > > +++ b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > > > > > > @@ -254,6 +254,14 @@ static int vdpasim_net_dev_add(struct
> > > > > > > vdpa_mgmt_dev *mdev, const char *name,
> > > > > > > dev_attr.work_fn = vdpasim_net_work;
> > > > > > > dev_attr.buffer_size = PAGE_SIZE;
> > > > > > >
> > > > > > > + if (config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) {
> > > > > > > + if (config->device_features &
> > > > > > > + ~dev_attr.supported_features)
> > > > > > > + return -EINVAL;
> > > > > > > + dev_attr.supported_features &=
> > > > > > > + config->device_features;
> > > > > > > + }
> > > > > > > +
> > > > > > > simdev = vdpasim_create(&dev_attr);
> > > > > > > if (IS_ERR(simdev))
> > > > > > > return PTR_ERR(simdev);
> > > > > > > @@ -294,7 +302,8 @@ static struct vdpa_mgmt_dev mgmt_dev = {
> > > > > > > .id_table = id_table,
> > > > > > > .ops = &vdpasim_net_mgmtdev_ops,
> > > > > > > .config_attr_mask = (1 << VDPA_ATTR_DEV_NET_CFG_MACADDR |
> > > > > > > - 1 << VDPA_ATTR_DEV_NET_CFG_MTU),
> > > > > > > + 1 << VDPA_ATTR_DEV_NET_CFG_MTU |
> > > > > > > + 1 << VDPA_ATTR_DEV_FEATURES),
> > > > > > > .max_supported_vqs = VDPASIM_NET_VQ_NUM,
> > > > > > > .supported_features = VDPASIM_NET_FEATURES,
> > > > > > > };
> > > > > > > --
> > > > > > > 2.25.1
> > > > > >
> > > >
> >
>
_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
2022-09-22 5:13 ` Eli Cohen
@ 2022-09-23 4:20 ` Jason Wang
2022-09-23 4:20 ` Jason Wang
1 sibling, 0 replies; 55+ messages in thread
From: Jason Wang @ 2022-09-23 4:20 UTC (permalink / raw)
To: Eli Cohen
Cc: mst, si-wei.liu, Parav Pandit, wuzongyong, virtualization,
linux-kernel, eperezma, lingshan.zhu, gdawar, lulu, xieyongji
On Thu, Sep 22, 2022 at 1:14 PM Eli Cohen <elic@nvidia.com> wrote:
>
> > From: Jason Wang <jasowang@redhat.com>
> > Sent: Thursday, 22 September 2022 5:43
> > To: mst@redhat.com; jasowang@redhat.com
> > Cc: Eli Cohen <elic@nvidia.com>; si-wei.liu@oracle.com; Parav Pandit
> > <parav@nvidia.com>; wuzongyong@linux.alibaba.com;
> > virtualization@lists.linux-foundation.org; linux-kernel@vger.kernel.org;
> > eperezma@redhat.com; lingshan.zhu@intel.com; gdawar@xilinx.com;
> > lulu@redhat.com; xieyongji@bytedance.com
> > Subject: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
> >
> > This patch implements features provisioning for vdpa_sim_net.
> >
> > 1) validating the provisioned features to be a subset of the parent
> > features.
> > 2) clearing the features that is not wanted by the userspace
> >
> > For example:
> >
> > # vdpa mgmtdev show
> > vdpasim_net:
> > supported_classes net
> > max_supported_vqs 3
> > dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT
> > VERSION_1 ACCESS_PLATFORM
> >
> > 1) provision vDPA device with all features that are supported by the
> > net simulator
> >
> > # vdpa dev add name dev1 mgmtdev vdpasim_net
> > # vdpa dev config show
> > dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> > negotiated_features MTU MAC CTRL_VQ CTRL_MAC_ADDR VERSION_1
> > ACCESS_PLATFORM
> >
> > 2) provision vDPA device with a subset of the features
> >
> > # vdpa dev add name dev1 mgmtdev vdpasim_net device_features
> > 0x300020000
>
> How about "features_mask" instead of "device_features"? Could avoid confusion.
It's device_feautres not a mask (the kernel code is probably confusing
per Michael's comment), so I tend to tweak the kernel code and keep
the name.
Thanks
>
> > # vdpa dev config show
> > dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> > negotiated_features CTRL_VQ VERSION_1 ACCESS_PLATFORM
> >
> > Reviewed-by: Eli Cohen <elic@nvidia.com>
> > Signed-off-by: Jason Wang <jasowang@redhat.com>
> > ---
> > drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 11 ++++++++++-
> > 1 file changed, 10 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > index 886449e88502..a9ba02be378b 100644
> > --- a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > +++ b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > @@ -254,6 +254,14 @@ static int vdpasim_net_dev_add(struct
> > vdpa_mgmt_dev *mdev, const char *name,
> > dev_attr.work_fn = vdpasim_net_work;
> > dev_attr.buffer_size = PAGE_SIZE;
> >
> > + if (config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) {
> > + if (config->device_features &
> > + ~dev_attr.supported_features)
> > + return -EINVAL;
> > + dev_attr.supported_features &=
> > + config->device_features;
> > + }
> > +
> > simdev = vdpasim_create(&dev_attr);
> > if (IS_ERR(simdev))
> > return PTR_ERR(simdev);
> > @@ -294,7 +302,8 @@ static struct vdpa_mgmt_dev mgmt_dev = {
> > .id_table = id_table,
> > .ops = &vdpasim_net_mgmtdev_ops,
> > .config_attr_mask = (1 << VDPA_ATTR_DEV_NET_CFG_MACADDR |
> > - 1 << VDPA_ATTR_DEV_NET_CFG_MTU),
> > + 1 << VDPA_ATTR_DEV_NET_CFG_MTU |
> > + 1 << VDPA_ATTR_DEV_FEATURES),
> > .max_supported_vqs = VDPASIM_NET_VQ_NUM,
> > .supported_features = VDPASIM_NET_FEATURES,
> > };
> > --
> > 2.25.1
>
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
@ 2022-09-23 4:20 ` Jason Wang
0 siblings, 0 replies; 55+ messages in thread
From: Jason Wang @ 2022-09-23 4:20 UTC (permalink / raw)
To: Eli Cohen
Cc: lulu, mst, xieyongji, linux-kernel, gdawar, virtualization,
eperezma, wuzongyong, lingshan.zhu
On Thu, Sep 22, 2022 at 1:14 PM Eli Cohen <elic@nvidia.com> wrote:
>
> > From: Jason Wang <jasowang@redhat.com>
> > Sent: Thursday, 22 September 2022 5:43
> > To: mst@redhat.com; jasowang@redhat.com
> > Cc: Eli Cohen <elic@nvidia.com>; si-wei.liu@oracle.com; Parav Pandit
> > <parav@nvidia.com>; wuzongyong@linux.alibaba.com;
> > virtualization@lists.linux-foundation.org; linux-kernel@vger.kernel.org;
> > eperezma@redhat.com; lingshan.zhu@intel.com; gdawar@xilinx.com;
> > lulu@redhat.com; xieyongji@bytedance.com
> > Subject: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
> >
> > This patch implements features provisioning for vdpa_sim_net.
> >
> > 1) validating the provisioned features to be a subset of the parent
> > features.
> > 2) clearing the features that is not wanted by the userspace
> >
> > For example:
> >
> > # vdpa mgmtdev show
> > vdpasim_net:
> > supported_classes net
> > max_supported_vqs 3
> > dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT
> > VERSION_1 ACCESS_PLATFORM
> >
> > 1) provision vDPA device with all features that are supported by the
> > net simulator
> >
> > # vdpa dev add name dev1 mgmtdev vdpasim_net
> > # vdpa dev config show
> > dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> > negotiated_features MTU MAC CTRL_VQ CTRL_MAC_ADDR VERSION_1
> > ACCESS_PLATFORM
> >
> > 2) provision vDPA device with a subset of the features
> >
> > # vdpa dev add name dev1 mgmtdev vdpasim_net device_features
> > 0x300020000
>
> How about "features_mask" instead of "device_features"? Could avoid confusion.
It's device_feautres not a mask (the kernel code is probably confusing
per Michael's comment), so I tend to tweak the kernel code and keep
the name.
Thanks
>
> > # vdpa dev config show
> > dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> > negotiated_features CTRL_VQ VERSION_1 ACCESS_PLATFORM
> >
> > Reviewed-by: Eli Cohen <elic@nvidia.com>
> > Signed-off-by: Jason Wang <jasowang@redhat.com>
> > ---
> > drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 11 ++++++++++-
> > 1 file changed, 10 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > index 886449e88502..a9ba02be378b 100644
> > --- a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > +++ b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > @@ -254,6 +254,14 @@ static int vdpasim_net_dev_add(struct
> > vdpa_mgmt_dev *mdev, const char *name,
> > dev_attr.work_fn = vdpasim_net_work;
> > dev_attr.buffer_size = PAGE_SIZE;
> >
> > + if (config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) {
> > + if (config->device_features &
> > + ~dev_attr.supported_features)
> > + return -EINVAL;
> > + dev_attr.supported_features &=
> > + config->device_features;
> > + }
> > +
> > simdev = vdpasim_create(&dev_attr);
> > if (IS_ERR(simdev))
> > return PTR_ERR(simdev);
> > @@ -294,7 +302,8 @@ static struct vdpa_mgmt_dev mgmt_dev = {
> > .id_table = id_table,
> > .ops = &vdpasim_net_mgmtdev_ops,
> > .config_attr_mask = (1 << VDPA_ATTR_DEV_NET_CFG_MACADDR |
> > - 1 << VDPA_ATTR_DEV_NET_CFG_MTU),
> > + 1 << VDPA_ATTR_DEV_NET_CFG_MTU |
> > + 1 << VDPA_ATTR_DEV_FEATURES),
> > .max_supported_vqs = VDPASIM_NET_VQ_NUM,
> > .supported_features = VDPASIM_NET_FEATURES,
> > };
> > --
> > 2.25.1
>
_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
2022-09-22 2:43 ` Jason Wang
@ 2022-09-23 20:01 ` Si-Wei Liu
-1 siblings, 0 replies; 55+ messages in thread
From: Si-Wei Liu @ 2022-09-23 20:01 UTC (permalink / raw)
To: Jason Wang, mst
Cc: elic, parav, wuzongyong, virtualization, linux-kernel, eperezma,
lingshan.zhu, gdawar, lulu, xieyongji
On 9/21/2022 7:43 PM, Jason Wang wrote:
> This patch implements features provisioning for vdpa_sim_net.
>
> 1) validating the provisioned features to be a subset of the parent
> features.
> 2) clearing the features that is not wanted by the userspace
>
> For example:
>
> # vdpa mgmtdev show
> vdpasim_net:
> supported_classes net
> max_supported_vqs 3
> dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM
Sighs, not to blame any one and it's perhaps too late, but this
"dev_features" attr in "mgmtdev show" command output should have been
called "supported_features" in the first place.
>
> 1) provision vDPA device with all features that are supported by the
> net simulator
>
> # vdpa dev add name dev1 mgmtdev vdpasim_net
> # vdpa dev config show
> dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> negotiated_features MTU MAC CTRL_VQ CTRL_MAC_ADDR VERSION_1 ACCESS_PLATFORM
Maybe not in this patch, but for completeness for the whole series,
could we also add device_features to the output?
When simply look at the "vdpa dev config show" output, I cannot really
tell the actual device_features that was used in vdpa creation. For e.g.
there is a missing feature ANY_LAYOUT from negotiated_features compared
with supported_features in mgmtdev, but the orchestration software
couldn't tell if the vdpa device on destination host should be created
with or without the ANY_LAYOUT feature.
Thanks,
-Siwei
>
> 2) provision vDPA device with a subset of the features
>
> # vdpa dev add name dev1 mgmtdev vdpasim_net device_features 0x300020000
> # vdpa dev config show
> dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> negotiated_features CTRL_VQ VERSION_1 ACCESS_PLATFORM
>
> Reviewed-by: Eli Cohen <elic@nvidia.com>
> Signed-off-by: Jason Wang <jasowang@redhat.com>
> ---
> drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 11 ++++++++++-
> 1 file changed, 10 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> index 886449e88502..a9ba02be378b 100644
> --- a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> +++ b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> @@ -254,6 +254,14 @@ static int vdpasim_net_dev_add(struct vdpa_mgmt_dev *mdev, const char *name,
> dev_attr.work_fn = vdpasim_net_work;
> dev_attr.buffer_size = PAGE_SIZE;
>
> + if (config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) {
> + if (config->device_features &
> + ~dev_attr.supported_features)
> + return -EINVAL;
> + dev_attr.supported_features &=
> + config->device_features;
> + }
> +
> simdev = vdpasim_create(&dev_attr);
> if (IS_ERR(simdev))
> return PTR_ERR(simdev);
> @@ -294,7 +302,8 @@ static struct vdpa_mgmt_dev mgmt_dev = {
> .id_table = id_table,
> .ops = &vdpasim_net_mgmtdev_ops,
> .config_attr_mask = (1 << VDPA_ATTR_DEV_NET_CFG_MACADDR |
> - 1 << VDPA_ATTR_DEV_NET_CFG_MTU),
> + 1 << VDPA_ATTR_DEV_NET_CFG_MTU |
> + 1 << VDPA_ATTR_DEV_FEATURES),
> .max_supported_vqs = VDPASIM_NET_VQ_NUM,
> .supported_features = VDPASIM_NET_FEATURES,
> };
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
@ 2022-09-23 20:01 ` Si-Wei Liu
0 siblings, 0 replies; 55+ messages in thread
From: Si-Wei Liu @ 2022-09-23 20:01 UTC (permalink / raw)
To: Jason Wang, mst
Cc: lulu, xieyongji, linux-kernel, gdawar, virtualization, eperezma,
wuzongyong, elic, lingshan.zhu
On 9/21/2022 7:43 PM, Jason Wang wrote:
> This patch implements features provisioning for vdpa_sim_net.
>
> 1) validating the provisioned features to be a subset of the parent
> features.
> 2) clearing the features that is not wanted by the userspace
>
> For example:
>
> # vdpa mgmtdev show
> vdpasim_net:
> supported_classes net
> max_supported_vqs 3
> dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM
Sighs, not to blame any one and it's perhaps too late, but this
"dev_features" attr in "mgmtdev show" command output should have been
called "supported_features" in the first place.
>
> 1) provision vDPA device with all features that are supported by the
> net simulator
>
> # vdpa dev add name dev1 mgmtdev vdpasim_net
> # vdpa dev config show
> dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> negotiated_features MTU MAC CTRL_VQ CTRL_MAC_ADDR VERSION_1 ACCESS_PLATFORM
Maybe not in this patch, but for completeness for the whole series,
could we also add device_features to the output?
When simply look at the "vdpa dev config show" output, I cannot really
tell the actual device_features that was used in vdpa creation. For e.g.
there is a missing feature ANY_LAYOUT from negotiated_features compared
with supported_features in mgmtdev, but the orchestration software
couldn't tell if the vdpa device on destination host should be created
with or without the ANY_LAYOUT feature.
Thanks,
-Siwei
>
> 2) provision vDPA device with a subset of the features
>
> # vdpa dev add name dev1 mgmtdev vdpasim_net device_features 0x300020000
> # vdpa dev config show
> dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> negotiated_features CTRL_VQ VERSION_1 ACCESS_PLATFORM
>
> Reviewed-by: Eli Cohen <elic@nvidia.com>
> Signed-off-by: Jason Wang <jasowang@redhat.com>
> ---
> drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 11 ++++++++++-
> 1 file changed, 10 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> index 886449e88502..a9ba02be378b 100644
> --- a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> +++ b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> @@ -254,6 +254,14 @@ static int vdpasim_net_dev_add(struct vdpa_mgmt_dev *mdev, const char *name,
> dev_attr.work_fn = vdpasim_net_work;
> dev_attr.buffer_size = PAGE_SIZE;
>
> + if (config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) {
> + if (config->device_features &
> + ~dev_attr.supported_features)
> + return -EINVAL;
> + dev_attr.supported_features &=
> + config->device_features;
> + }
> +
> simdev = vdpasim_create(&dev_attr);
> if (IS_ERR(simdev))
> return PTR_ERR(simdev);
> @@ -294,7 +302,8 @@ static struct vdpa_mgmt_dev mgmt_dev = {
> .id_table = id_table,
> .ops = &vdpasim_net_mgmtdev_ops,
> .config_attr_mask = (1 << VDPA_ATTR_DEV_NET_CFG_MACADDR |
> - 1 << VDPA_ATTR_DEV_NET_CFG_MTU),
> + 1 << VDPA_ATTR_DEV_NET_CFG_MTU |
> + 1 << VDPA_ATTR_DEV_FEATURES),
> .max_supported_vqs = VDPASIM_NET_VQ_NUM,
> .supported_features = VDPASIM_NET_FEATURES,
> };
_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: [PATCH V2 3/3] vp_vdpa: support feature provisioning
2022-09-22 2:43 ` Jason Wang
@ 2022-09-23 20:11 ` Si-Wei Liu
-1 siblings, 0 replies; 55+ messages in thread
From: Si-Wei Liu @ 2022-09-23 20:11 UTC (permalink / raw)
To: Jason Wang, mst
Cc: elic, parav, wuzongyong, virtualization, linux-kernel, eperezma,
lingshan.zhu, gdawar, lulu, xieyongji
On 9/21/2022 7:43 PM, Jason Wang wrote:
> This patch allows the device features to be provisioned via
> netlink. This is done by:
>
> 1) validating the provisioned features to be a subset of the parent
> features.
> 2) clearing the features that is not wanted by the userspace
>
> For example:
>
> # vdpa mgmtdev show
> pci/0000:02:00.0:
> supported_classes net
> max_supported_vqs 3
> dev_features CSUM GUEST_CSUM CTRL_GUEST_OFFLOADS MAC GUEST_TSO4
> GUEST_TSO6 GUEST_ECN GUEST_UFO HOST_TSO4 HOST_TSO6 HOST_ECN HOST_UFO
> MRG_RXBUF STATUS CTRL_VQ CTRL_RX CTRL_VLAN CTRL_RX_EXTRA
> GUEST_ANNOUNCE CTRL_MAC_ADDR RING_INDIRECT_DESC RING_EVENT_IDX
> VERSION_1 ACCESS_PLATFORM
>
> 1) provision vDPA device with all features that are supported by the virtio-pci
>
> # vdpa dev add name dev1 mgmtdev pci/0000:02:00.0
> # vdpa dev config show
> dev1: mac 52:54:00:12:34:56 link up link_announce false mtu 65535
> negotiated_features CSUM GUEST_CSUM CTRL_GUEST_OFFLOADS MAC
> GUEST_TSO4 GUEST_TSO6 GUEST_ECN GUEST_UFO HOST_TSO4 HOST_TSO6
> HOST_ECN HOST_UFO MRG_RXBUF STATUS CTRL_VQ CTRL_RX CTRL_VLAN
> GUEST_ANNOUNCE CTRL_MAC_ADDR RING_INDIRECT_DESC RING_EVENT_IDX
> VERSION_1 ACCESS_PLATFORM
>
> 2) provision vDPA device with a subset of the features
>
> # vdpa dev add name dev1 mgmtdev pci/0000:02:00.0 device_features 0x300020000
> # dev1: mac 52:54:00:12:34:56 link up link_announce false mtu 65535
> negotiated_features CTRL_VQ VERSION_1 ACCESS_PLATFORM
>
> Reviewed-by: Eli Cohen <elic@nvidia.com>
> Signed-off-by: Jason Wang <jasowang@redhat.com>
> ---
> drivers/vdpa/virtio_pci/vp_vdpa.c | 16 ++++++++++++++--
> 1 file changed, 14 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/vdpa/virtio_pci/vp_vdpa.c b/drivers/vdpa/virtio_pci/vp_vdpa.c
> index 04522077735b..4b28e0c95ba2 100644
> --- a/drivers/vdpa/virtio_pci/vp_vdpa.c
> +++ b/drivers/vdpa/virtio_pci/vp_vdpa.c
> @@ -17,6 +17,7 @@
> #include <linux/virtio_ring.h>
> #include <linux/virtio_pci.h>
> #include <linux/virtio_pci_modern.h>
> +#include <uapi/linux/vdpa.h>
>
> #define VP_VDPA_QUEUE_MAX 256
> #define VP_VDPA_DRIVER_NAME "vp_vdpa"
> @@ -35,6 +36,7 @@ struct vp_vdpa {
> struct virtio_pci_modern_device *mdev;
> struct vp_vring *vring;
> struct vdpa_callback config_cb;
> + u64 device_features;
> char msix_name[VP_VDPA_NAME_SIZE];
> int config_irq;
> int queues;
> @@ -66,9 +68,9 @@ static struct virtio_pci_modern_device *vp_vdpa_to_mdev(struct vp_vdpa *vp_vdpa)
>
> static u64 vp_vdpa_get_device_features(struct vdpa_device *vdpa)
> {
> - struct virtio_pci_modern_device *mdev = vdpa_to_mdev(vdpa);
> + struct vp_vdpa *vp_vdpa = vdpa_to_vp(vdpa);
>
> - return vp_modern_get_features(mdev);
> + return vp_vdpa->device_features;
> }
>
> static int vp_vdpa_set_driver_features(struct vdpa_device *vdpa, u64 features)
> @@ -475,6 +477,7 @@ static int vp_vdpa_dev_add(struct vdpa_mgmt_dev *v_mdev, const char *name,
> struct pci_dev *pdev = mdev->pci_dev;
> struct device *dev = &pdev->dev;
> struct vp_vdpa *vp_vdpa = NULL;
> + u64 device_features;
> int ret, i;
>
> vp_vdpa = vdpa_alloc_device(struct vp_vdpa, vdpa,
> @@ -491,6 +494,14 @@ static int vp_vdpa_dev_add(struct vdpa_mgmt_dev *v_mdev, const char *name,
> vp_vdpa->queues = vp_modern_get_num_queues(mdev);
> vp_vdpa->mdev = mdev;
>
> + device_features = vp_modern_get_features(mdev);
> + if (add_config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) {
> + if (add_config->device_features & ~device_features)
> + return -EINVAL;
Should use "goto err" rather than direct return. Also, would be the best
to tell user the reason why device creation is failing. In the other
places of the same function, dev_err() or dev_warn() is used.
-Siwei
> + device_features &= add_config->device_features;
> + }
> + vp_vdpa->device_features = device_features;
> +
> ret = devm_add_action_or_reset(dev, vp_vdpa_free_irq_vectors, pdev);
> if (ret) {
> dev_err(&pdev->dev,
> @@ -599,6 +610,7 @@ static int vp_vdpa_probe(struct pci_dev *pdev, const struct pci_device_id *id)
> mgtdev->id_table = mdev_id;
> mgtdev->max_supported_vqs = vp_modern_get_num_queues(mdev);
> mgtdev->supported_features = vp_modern_get_features(mdev);
> + mgtdev->config_attr_mask = (1 << VDPA_ATTR_DEV_FEATURES);
> pci_set_master(pdev);
> pci_set_drvdata(pdev, vp_vdpa_mgtdev);
>
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: [PATCH V2 3/3] vp_vdpa: support feature provisioning
@ 2022-09-23 20:11 ` Si-Wei Liu
0 siblings, 0 replies; 55+ messages in thread
From: Si-Wei Liu @ 2022-09-23 20:11 UTC (permalink / raw)
To: Jason Wang, mst
Cc: lulu, xieyongji, linux-kernel, gdawar, virtualization, eperezma,
wuzongyong, elic, lingshan.zhu
On 9/21/2022 7:43 PM, Jason Wang wrote:
> This patch allows the device features to be provisioned via
> netlink. This is done by:
>
> 1) validating the provisioned features to be a subset of the parent
> features.
> 2) clearing the features that is not wanted by the userspace
>
> For example:
>
> # vdpa mgmtdev show
> pci/0000:02:00.0:
> supported_classes net
> max_supported_vqs 3
> dev_features CSUM GUEST_CSUM CTRL_GUEST_OFFLOADS MAC GUEST_TSO4
> GUEST_TSO6 GUEST_ECN GUEST_UFO HOST_TSO4 HOST_TSO6 HOST_ECN HOST_UFO
> MRG_RXBUF STATUS CTRL_VQ CTRL_RX CTRL_VLAN CTRL_RX_EXTRA
> GUEST_ANNOUNCE CTRL_MAC_ADDR RING_INDIRECT_DESC RING_EVENT_IDX
> VERSION_1 ACCESS_PLATFORM
>
> 1) provision vDPA device with all features that are supported by the virtio-pci
>
> # vdpa dev add name dev1 mgmtdev pci/0000:02:00.0
> # vdpa dev config show
> dev1: mac 52:54:00:12:34:56 link up link_announce false mtu 65535
> negotiated_features CSUM GUEST_CSUM CTRL_GUEST_OFFLOADS MAC
> GUEST_TSO4 GUEST_TSO6 GUEST_ECN GUEST_UFO HOST_TSO4 HOST_TSO6
> HOST_ECN HOST_UFO MRG_RXBUF STATUS CTRL_VQ CTRL_RX CTRL_VLAN
> GUEST_ANNOUNCE CTRL_MAC_ADDR RING_INDIRECT_DESC RING_EVENT_IDX
> VERSION_1 ACCESS_PLATFORM
>
> 2) provision vDPA device with a subset of the features
>
> # vdpa dev add name dev1 mgmtdev pci/0000:02:00.0 device_features 0x300020000
> # dev1: mac 52:54:00:12:34:56 link up link_announce false mtu 65535
> negotiated_features CTRL_VQ VERSION_1 ACCESS_PLATFORM
>
> Reviewed-by: Eli Cohen <elic@nvidia.com>
> Signed-off-by: Jason Wang <jasowang@redhat.com>
> ---
> drivers/vdpa/virtio_pci/vp_vdpa.c | 16 ++++++++++++++--
> 1 file changed, 14 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/vdpa/virtio_pci/vp_vdpa.c b/drivers/vdpa/virtio_pci/vp_vdpa.c
> index 04522077735b..4b28e0c95ba2 100644
> --- a/drivers/vdpa/virtio_pci/vp_vdpa.c
> +++ b/drivers/vdpa/virtio_pci/vp_vdpa.c
> @@ -17,6 +17,7 @@
> #include <linux/virtio_ring.h>
> #include <linux/virtio_pci.h>
> #include <linux/virtio_pci_modern.h>
> +#include <uapi/linux/vdpa.h>
>
> #define VP_VDPA_QUEUE_MAX 256
> #define VP_VDPA_DRIVER_NAME "vp_vdpa"
> @@ -35,6 +36,7 @@ struct vp_vdpa {
> struct virtio_pci_modern_device *mdev;
> struct vp_vring *vring;
> struct vdpa_callback config_cb;
> + u64 device_features;
> char msix_name[VP_VDPA_NAME_SIZE];
> int config_irq;
> int queues;
> @@ -66,9 +68,9 @@ static struct virtio_pci_modern_device *vp_vdpa_to_mdev(struct vp_vdpa *vp_vdpa)
>
> static u64 vp_vdpa_get_device_features(struct vdpa_device *vdpa)
> {
> - struct virtio_pci_modern_device *mdev = vdpa_to_mdev(vdpa);
> + struct vp_vdpa *vp_vdpa = vdpa_to_vp(vdpa);
>
> - return vp_modern_get_features(mdev);
> + return vp_vdpa->device_features;
> }
>
> static int vp_vdpa_set_driver_features(struct vdpa_device *vdpa, u64 features)
> @@ -475,6 +477,7 @@ static int vp_vdpa_dev_add(struct vdpa_mgmt_dev *v_mdev, const char *name,
> struct pci_dev *pdev = mdev->pci_dev;
> struct device *dev = &pdev->dev;
> struct vp_vdpa *vp_vdpa = NULL;
> + u64 device_features;
> int ret, i;
>
> vp_vdpa = vdpa_alloc_device(struct vp_vdpa, vdpa,
> @@ -491,6 +494,14 @@ static int vp_vdpa_dev_add(struct vdpa_mgmt_dev *v_mdev, const char *name,
> vp_vdpa->queues = vp_modern_get_num_queues(mdev);
> vp_vdpa->mdev = mdev;
>
> + device_features = vp_modern_get_features(mdev);
> + if (add_config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) {
> + if (add_config->device_features & ~device_features)
> + return -EINVAL;
Should use "goto err" rather than direct return. Also, would be the best
to tell user the reason why device creation is failing. In the other
places of the same function, dev_err() or dev_warn() is used.
-Siwei
> + device_features &= add_config->device_features;
> + }
> + vp_vdpa->device_features = device_features;
> +
> ret = devm_add_action_or_reset(dev, vp_vdpa_free_irq_vectors, pdev);
> if (ret) {
> dev_err(&pdev->dev,
> @@ -599,6 +610,7 @@ static int vp_vdpa_probe(struct pci_dev *pdev, const struct pci_device_id *id)
> mgtdev->id_table = mdev_id;
> mgtdev->max_supported_vqs = vp_modern_get_num_queues(mdev);
> mgtdev->supported_features = vp_modern_get_features(mdev);
> + mgtdev->config_attr_mask = (1 << VDPA_ATTR_DEV_FEATURES);
> pci_set_master(pdev);
> pci_set_drvdata(pdev, vp_vdpa_mgtdev);
>
_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
2022-09-23 20:01 ` Si-Wei Liu
@ 2022-09-26 7:11 ` Jason Wang
-1 siblings, 0 replies; 55+ messages in thread
From: Jason Wang @ 2022-09-26 7:11 UTC (permalink / raw)
To: Si-Wei Liu
Cc: Cindy Lu, mst, Yongji Xie, linux-kernel, Gautam Dawar,
virtualization, eperezma, Wu Zongyong, Eli Cohen, Zhu Lingshan
On Sat, Sep 24, 2022 at 4:01 AM Si-Wei Liu <si-wei.liu@oracle.com> wrote:
>
>
>
> On 9/21/2022 7:43 PM, Jason Wang wrote:
> > This patch implements features provisioning for vdpa_sim_net.
> >
> > 1) validating the provisioned features to be a subset of the parent
> > features.
> > 2) clearing the features that is not wanted by the userspace
> >
> > For example:
> >
> > # vdpa mgmtdev show
> > vdpasim_net:
> > supported_classes net
> > max_supported_vqs 3
> > dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM
> Sighs, not to blame any one and it's perhaps too late, but this
> "dev_features" attr in "mgmtdev show" command output should have been
> called "supported_features" in the first place.
Not sure I get this, but I guess this is the negotiated features actually.
I think Ling Shan is working on reporting both negotiated features
with the device features.
>
> >
> > 1) provision vDPA device with all features that are supported by the
> > net simulator
> >
> > # vdpa dev add name dev1 mgmtdev vdpasim_net
> > # vdpa dev config show
> > dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> > negotiated_features MTU MAC CTRL_VQ CTRL_MAC_ADDR VERSION_1 ACCESS_PLATFORM
> Maybe not in this patch, but for completeness for the whole series,
> could we also add device_features to the output?
Lingshan, could you please share your thoughts or patch on this?
>
> When simply look at the "vdpa dev config show" output, I cannot really
> tell the actual device_features that was used in vdpa creation. For e.g.
> there is a missing feature ANY_LAYOUT from negotiated_features compared
> with supported_features in mgmtdev, but the orchestration software
> couldn't tell if the vdpa device on destination host should be created
> with or without the ANY_LAYOUT feature.
I think VERSION_1 implies ANY_LAYOUT. But it should be sufficient to
use features_src & feature_dst in this case. Actually, it should work
similar as to the cpu flags, the management software should introduce
the concept of cluster which means the maximal set of common features
is calculated and provisioned during device creation to allow
migration among the nodes inside the cluster.
Thanks
>
> Thanks,
> -Siwei
>
>
> >
> > 2) provision vDPA device with a subset of the features
> >
> > # vdpa dev add name dev1 mgmtdev vdpasim_net device_features 0x300020000
> > # vdpa dev config show
> > dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> > negotiated_features CTRL_VQ VERSION_1 ACCESS_PLATFORM
> >
> > Reviewed-by: Eli Cohen <elic@nvidia.com>
> > Signed-off-by: Jason Wang <jasowang@redhat.com>
> > ---
> > drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 11 ++++++++++-
> > 1 file changed, 10 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > index 886449e88502..a9ba02be378b 100644
> > --- a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > +++ b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > @@ -254,6 +254,14 @@ static int vdpasim_net_dev_add(struct vdpa_mgmt_dev *mdev, const char *name,
> > dev_attr.work_fn = vdpasim_net_work;
> > dev_attr.buffer_size = PAGE_SIZE;
> >
> > + if (config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) {
> > + if (config->device_features &
> > + ~dev_attr.supported_features)
> > + return -EINVAL;
> > + dev_attr.supported_features &=
> > + config->device_features;
> > + }
> > +
> > simdev = vdpasim_create(&dev_attr);
> > if (IS_ERR(simdev))
> > return PTR_ERR(simdev);
> > @@ -294,7 +302,8 @@ static struct vdpa_mgmt_dev mgmt_dev = {
> > .id_table = id_table,
> > .ops = &vdpasim_net_mgmtdev_ops,
> > .config_attr_mask = (1 << VDPA_ATTR_DEV_NET_CFG_MACADDR |
> > - 1 << VDPA_ATTR_DEV_NET_CFG_MTU),
> > + 1 << VDPA_ATTR_DEV_NET_CFG_MTU |
> > + 1 << VDPA_ATTR_DEV_FEATURES),
> > .max_supported_vqs = VDPASIM_NET_VQ_NUM,
> > .supported_features = VDPASIM_NET_FEATURES,
> > };
>
_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
@ 2022-09-26 7:11 ` Jason Wang
0 siblings, 0 replies; 55+ messages in thread
From: Jason Wang @ 2022-09-26 7:11 UTC (permalink / raw)
To: Si-Wei Liu
Cc: mst, Eli Cohen, Parav Pandit, Wu Zongyong, virtualization,
linux-kernel, eperezma, Zhu Lingshan, Gautam Dawar, Cindy Lu,
Yongji Xie
On Sat, Sep 24, 2022 at 4:01 AM Si-Wei Liu <si-wei.liu@oracle.com> wrote:
>
>
>
> On 9/21/2022 7:43 PM, Jason Wang wrote:
> > This patch implements features provisioning for vdpa_sim_net.
> >
> > 1) validating the provisioned features to be a subset of the parent
> > features.
> > 2) clearing the features that is not wanted by the userspace
> >
> > For example:
> >
> > # vdpa mgmtdev show
> > vdpasim_net:
> > supported_classes net
> > max_supported_vqs 3
> > dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM
> Sighs, not to blame any one and it's perhaps too late, but this
> "dev_features" attr in "mgmtdev show" command output should have been
> called "supported_features" in the first place.
Not sure I get this, but I guess this is the negotiated features actually.
I think Ling Shan is working on reporting both negotiated features
with the device features.
>
> >
> > 1) provision vDPA device with all features that are supported by the
> > net simulator
> >
> > # vdpa dev add name dev1 mgmtdev vdpasim_net
> > # vdpa dev config show
> > dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> > negotiated_features MTU MAC CTRL_VQ CTRL_MAC_ADDR VERSION_1 ACCESS_PLATFORM
> Maybe not in this patch, but for completeness for the whole series,
> could we also add device_features to the output?
Lingshan, could you please share your thoughts or patch on this?
>
> When simply look at the "vdpa dev config show" output, I cannot really
> tell the actual device_features that was used in vdpa creation. For e.g.
> there is a missing feature ANY_LAYOUT from negotiated_features compared
> with supported_features in mgmtdev, but the orchestration software
> couldn't tell if the vdpa device on destination host should be created
> with or without the ANY_LAYOUT feature.
I think VERSION_1 implies ANY_LAYOUT. But it should be sufficient to
use features_src & feature_dst in this case. Actually, it should work
similar as to the cpu flags, the management software should introduce
the concept of cluster which means the maximal set of common features
is calculated and provisioned during device creation to allow
migration among the nodes inside the cluster.
Thanks
>
> Thanks,
> -Siwei
>
>
> >
> > 2) provision vDPA device with a subset of the features
> >
> > # vdpa dev add name dev1 mgmtdev vdpasim_net device_features 0x300020000
> > # vdpa dev config show
> > dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> > negotiated_features CTRL_VQ VERSION_1 ACCESS_PLATFORM
> >
> > Reviewed-by: Eli Cohen <elic@nvidia.com>
> > Signed-off-by: Jason Wang <jasowang@redhat.com>
> > ---
> > drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 11 ++++++++++-
> > 1 file changed, 10 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > index 886449e88502..a9ba02be378b 100644
> > --- a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > +++ b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > @@ -254,6 +254,14 @@ static int vdpasim_net_dev_add(struct vdpa_mgmt_dev *mdev, const char *name,
> > dev_attr.work_fn = vdpasim_net_work;
> > dev_attr.buffer_size = PAGE_SIZE;
> >
> > + if (config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) {
> > + if (config->device_features &
> > + ~dev_attr.supported_features)
> > + return -EINVAL;
> > + dev_attr.supported_features &=
> > + config->device_features;
> > + }
> > +
> > simdev = vdpasim_create(&dev_attr);
> > if (IS_ERR(simdev))
> > return PTR_ERR(simdev);
> > @@ -294,7 +302,8 @@ static struct vdpa_mgmt_dev mgmt_dev = {
> > .id_table = id_table,
> > .ops = &vdpasim_net_mgmtdev_ops,
> > .config_attr_mask = (1 << VDPA_ATTR_DEV_NET_CFG_MACADDR |
> > - 1 << VDPA_ATTR_DEV_NET_CFG_MTU),
> > + 1 << VDPA_ATTR_DEV_NET_CFG_MTU |
> > + 1 << VDPA_ATTR_DEV_FEATURES),
> > .max_supported_vqs = VDPASIM_NET_VQ_NUM,
> > .supported_features = VDPASIM_NET_FEATURES,
> > };
>
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
2022-09-26 7:11 ` Jason Wang
@ 2022-09-26 7:11 ` Jason Wang
-1 siblings, 0 replies; 55+ messages in thread
From: Jason Wang @ 2022-09-26 7:11 UTC (permalink / raw)
To: Si-Wei Liu
Cc: mst, Eli Cohen, Parav Pandit, Wu Zongyong, virtualization,
linux-kernel, eperezma, Zhu Lingshan, Gautam Dawar, Cindy Lu,
Yongji Xie
On Mon, Sep 26, 2022 at 3:11 PM Jason Wang <jasowang@redhat.com> wrote:
>
> On Sat, Sep 24, 2022 at 4:01 AM Si-Wei Liu <si-wei.liu@oracle.com> wrote:
> >
> >
> >
> > On 9/21/2022 7:43 PM, Jason Wang wrote:
> > > This patch implements features provisioning for vdpa_sim_net.
> > >
> > > 1) validating the provisioned features to be a subset of the parent
> > > features.
> > > 2) clearing the features that is not wanted by the userspace
> > >
> > > For example:
> > >
> > > # vdpa mgmtdev show
> > > vdpasim_net:
> > > supported_classes net
> > > max_supported_vqs 3
> > > dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM
> > Sighs, not to blame any one and it's perhaps too late, but this
> > "dev_features" attr in "mgmtdev show" command output should have been
> > called "supported_features" in the first place.
>
> Not sure I get this, but I guess this is the negotiated features actually.
>
> I think Ling Shan is working on reporting both negotiated features
> with the device features.
>
> >
> > >
> > > 1) provision vDPA device with all features that are supported by the
> > > net simulator
> > >
> > > # vdpa dev add name dev1 mgmtdev vdpasim_net
> > > # vdpa dev config show
> > > dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> > > negotiated_features MTU MAC CTRL_VQ CTRL_MAC_ADDR VERSION_1 ACCESS_PLATFORM
> > Maybe not in this patch, but for completeness for the whole series,
> > could we also add device_features to the output?
>
> Lingshan, could you please share your thoughts or patch on this?
>
> >
> > When simply look at the "vdpa dev config show" output, I cannot really
> > tell the actual device_features that was used in vdpa creation. For e.g.
> > there is a missing feature ANY_LAYOUT from negotiated_features compared
> > with supported_features in mgmtdev, but the orchestration software
> > couldn't tell if the vdpa device on destination host should be created
> > with or without the ANY_LAYOUT feature.
Btw, it might be helpful to show those features in hex as well.
>
> I think VERSION_1 implies ANY_LAYOUT. But it should be sufficient to
> use features_src & feature_dst in this case. Actually, it should work
> similar as to the cpu flags, the management software should introduce
> the concept of cluster which means the maximal set of common features
> is calculated and provisioned during device creation to allow
> migration among the nodes inside the cluster.
>
> Thanks
>
> >
> > Thanks,
> > -Siwei
> >
> >
> > >
> > > 2) provision vDPA device with a subset of the features
> > >
> > > # vdpa dev add name dev1 mgmtdev vdpasim_net device_features 0x300020000
> > > # vdpa dev config show
> > > dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> > > negotiated_features CTRL_VQ VERSION_1 ACCESS_PLATFORM
> > >
> > > Reviewed-by: Eli Cohen <elic@nvidia.com>
> > > Signed-off-by: Jason Wang <jasowang@redhat.com>
> > > ---
> > > drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 11 ++++++++++-
> > > 1 file changed, 10 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > > index 886449e88502..a9ba02be378b 100644
> > > --- a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > > +++ b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > > @@ -254,6 +254,14 @@ static int vdpasim_net_dev_add(struct vdpa_mgmt_dev *mdev, const char *name,
> > > dev_attr.work_fn = vdpasim_net_work;
> > > dev_attr.buffer_size = PAGE_SIZE;
> > >
> > > + if (config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) {
> > > + if (config->device_features &
> > > + ~dev_attr.supported_features)
> > > + return -EINVAL;
> > > + dev_attr.supported_features &=
> > > + config->device_features;
> > > + }
> > > +
> > > simdev = vdpasim_create(&dev_attr);
> > > if (IS_ERR(simdev))
> > > return PTR_ERR(simdev);
> > > @@ -294,7 +302,8 @@ static struct vdpa_mgmt_dev mgmt_dev = {
> > > .id_table = id_table,
> > > .ops = &vdpasim_net_mgmtdev_ops,
> > > .config_attr_mask = (1 << VDPA_ATTR_DEV_NET_CFG_MACADDR |
> > > - 1 << VDPA_ATTR_DEV_NET_CFG_MTU),
> > > + 1 << VDPA_ATTR_DEV_NET_CFG_MTU |
> > > + 1 << VDPA_ATTR_DEV_FEATURES),
> > > .max_supported_vqs = VDPASIM_NET_VQ_NUM,
> > > .supported_features = VDPASIM_NET_FEATURES,
> > > };
> >
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
@ 2022-09-26 7:11 ` Jason Wang
0 siblings, 0 replies; 55+ messages in thread
From: Jason Wang @ 2022-09-26 7:11 UTC (permalink / raw)
To: Si-Wei Liu
Cc: Cindy Lu, mst, Yongji Xie, linux-kernel, Gautam Dawar,
virtualization, eperezma, Wu Zongyong, Eli Cohen, Zhu Lingshan
On Mon, Sep 26, 2022 at 3:11 PM Jason Wang <jasowang@redhat.com> wrote:
>
> On Sat, Sep 24, 2022 at 4:01 AM Si-Wei Liu <si-wei.liu@oracle.com> wrote:
> >
> >
> >
> > On 9/21/2022 7:43 PM, Jason Wang wrote:
> > > This patch implements features provisioning for vdpa_sim_net.
> > >
> > > 1) validating the provisioned features to be a subset of the parent
> > > features.
> > > 2) clearing the features that is not wanted by the userspace
> > >
> > > For example:
> > >
> > > # vdpa mgmtdev show
> > > vdpasim_net:
> > > supported_classes net
> > > max_supported_vqs 3
> > > dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM
> > Sighs, not to blame any one and it's perhaps too late, but this
> > "dev_features" attr in "mgmtdev show" command output should have been
> > called "supported_features" in the first place.
>
> Not sure I get this, but I guess this is the negotiated features actually.
>
> I think Ling Shan is working on reporting both negotiated features
> with the device features.
>
> >
> > >
> > > 1) provision vDPA device with all features that are supported by the
> > > net simulator
> > >
> > > # vdpa dev add name dev1 mgmtdev vdpasim_net
> > > # vdpa dev config show
> > > dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> > > negotiated_features MTU MAC CTRL_VQ CTRL_MAC_ADDR VERSION_1 ACCESS_PLATFORM
> > Maybe not in this patch, but for completeness for the whole series,
> > could we also add device_features to the output?
>
> Lingshan, could you please share your thoughts or patch on this?
>
> >
> > When simply look at the "vdpa dev config show" output, I cannot really
> > tell the actual device_features that was used in vdpa creation. For e.g.
> > there is a missing feature ANY_LAYOUT from negotiated_features compared
> > with supported_features in mgmtdev, but the orchestration software
> > couldn't tell if the vdpa device on destination host should be created
> > with or without the ANY_LAYOUT feature.
Btw, it might be helpful to show those features in hex as well.
>
> I think VERSION_1 implies ANY_LAYOUT. But it should be sufficient to
> use features_src & feature_dst in this case. Actually, it should work
> similar as to the cpu flags, the management software should introduce
> the concept of cluster which means the maximal set of common features
> is calculated and provisioned during device creation to allow
> migration among the nodes inside the cluster.
>
> Thanks
>
> >
> > Thanks,
> > -Siwei
> >
> >
> > >
> > > 2) provision vDPA device with a subset of the features
> > >
> > > # vdpa dev add name dev1 mgmtdev vdpasim_net device_features 0x300020000
> > > # vdpa dev config show
> > > dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> > > negotiated_features CTRL_VQ VERSION_1 ACCESS_PLATFORM
> > >
> > > Reviewed-by: Eli Cohen <elic@nvidia.com>
> > > Signed-off-by: Jason Wang <jasowang@redhat.com>
> > > ---
> > > drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 11 ++++++++++-
> > > 1 file changed, 10 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > > index 886449e88502..a9ba02be378b 100644
> > > --- a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > > +++ b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > > @@ -254,6 +254,14 @@ static int vdpasim_net_dev_add(struct vdpa_mgmt_dev *mdev, const char *name,
> > > dev_attr.work_fn = vdpasim_net_work;
> > > dev_attr.buffer_size = PAGE_SIZE;
> > >
> > > + if (config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) {
> > > + if (config->device_features &
> > > + ~dev_attr.supported_features)
> > > + return -EINVAL;
> > > + dev_attr.supported_features &=
> > > + config->device_features;
> > > + }
> > > +
> > > simdev = vdpasim_create(&dev_attr);
> > > if (IS_ERR(simdev))
> > > return PTR_ERR(simdev);
> > > @@ -294,7 +302,8 @@ static struct vdpa_mgmt_dev mgmt_dev = {
> > > .id_table = id_table,
> > > .ops = &vdpasim_net_mgmtdev_ops,
> > > .config_attr_mask = (1 << VDPA_ATTR_DEV_NET_CFG_MACADDR |
> > > - 1 << VDPA_ATTR_DEV_NET_CFG_MTU),
> > > + 1 << VDPA_ATTR_DEV_NET_CFG_MTU |
> > > + 1 << VDPA_ATTR_DEV_FEATURES),
> > > .max_supported_vqs = VDPASIM_NET_VQ_NUM,
> > > .supported_features = VDPASIM_NET_FEATURES,
> > > };
> >
_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: [PATCH V2 3/3] vp_vdpa: support feature provisioning
2022-09-23 20:11 ` Si-Wei Liu
@ 2022-09-26 7:14 ` Jason Wang
-1 siblings, 0 replies; 55+ messages in thread
From: Jason Wang @ 2022-09-26 7:14 UTC (permalink / raw)
To: Si-Wei Liu
Cc: mst, Eli Cohen, Parav Pandit, Wu Zongyong, virtualization,
linux-kernel, eperezma, Zhu Lingshan, Gautam Dawar, Cindy Lu,
Yongji Xie
On Sat, Sep 24, 2022 at 4:11 AM Si-Wei Liu <si-wei.liu@oracle.com> wrote:
>
>
>
> On 9/21/2022 7:43 PM, Jason Wang wrote:
> > This patch allows the device features to be provisioned via
> > netlink. This is done by:
> >
> > 1) validating the provisioned features to be a subset of the parent
> > features.
> > 2) clearing the features that is not wanted by the userspace
> >
> > For example:
> >
> > # vdpa mgmtdev show
> > pci/0000:02:00.0:
> > supported_classes net
> > max_supported_vqs 3
> > dev_features CSUM GUEST_CSUM CTRL_GUEST_OFFLOADS MAC GUEST_TSO4
> > GUEST_TSO6 GUEST_ECN GUEST_UFO HOST_TSO4 HOST_TSO6 HOST_ECN HOST_UFO
> > MRG_RXBUF STATUS CTRL_VQ CTRL_RX CTRL_VLAN CTRL_RX_EXTRA
> > GUEST_ANNOUNCE CTRL_MAC_ADDR RING_INDIRECT_DESC RING_EVENT_IDX
> > VERSION_1 ACCESS_PLATFORM
> >
> > 1) provision vDPA device with all features that are supported by the virtio-pci
> >
> > # vdpa dev add name dev1 mgmtdev pci/0000:02:00.0
> > # vdpa dev config show
> > dev1: mac 52:54:00:12:34:56 link up link_announce false mtu 65535
> > negotiated_features CSUM GUEST_CSUM CTRL_GUEST_OFFLOADS MAC
> > GUEST_TSO4 GUEST_TSO6 GUEST_ECN GUEST_UFO HOST_TSO4 HOST_TSO6
> > HOST_ECN HOST_UFO MRG_RXBUF STATUS CTRL_VQ CTRL_RX CTRL_VLAN
> > GUEST_ANNOUNCE CTRL_MAC_ADDR RING_INDIRECT_DESC RING_EVENT_IDX
> > VERSION_1 ACCESS_PLATFORM
> >
> > 2) provision vDPA device with a subset of the features
> >
> > # vdpa dev add name dev1 mgmtdev pci/0000:02:00.0 device_features 0x300020000
> > # dev1: mac 52:54:00:12:34:56 link up link_announce false mtu 65535
> > negotiated_features CTRL_VQ VERSION_1 ACCESS_PLATFORM
> >
> > Reviewed-by: Eli Cohen <elic@nvidia.com>
> > Signed-off-by: Jason Wang <jasowang@redhat.com>
> > ---
> > drivers/vdpa/virtio_pci/vp_vdpa.c | 16 ++++++++++++++--
> > 1 file changed, 14 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/vdpa/virtio_pci/vp_vdpa.c b/drivers/vdpa/virtio_pci/vp_vdpa.c
> > index 04522077735b..4b28e0c95ba2 100644
> > --- a/drivers/vdpa/virtio_pci/vp_vdpa.c
> > +++ b/drivers/vdpa/virtio_pci/vp_vdpa.c
> > @@ -17,6 +17,7 @@
> > #include <linux/virtio_ring.h>
> > #include <linux/virtio_pci.h>
> > #include <linux/virtio_pci_modern.h>
> > +#include <uapi/linux/vdpa.h>
> >
> > #define VP_VDPA_QUEUE_MAX 256
> > #define VP_VDPA_DRIVER_NAME "vp_vdpa"
> > @@ -35,6 +36,7 @@ struct vp_vdpa {
> > struct virtio_pci_modern_device *mdev;
> > struct vp_vring *vring;
> > struct vdpa_callback config_cb;
> > + u64 device_features;
> > char msix_name[VP_VDPA_NAME_SIZE];
> > int config_irq;
> > int queues;
> > @@ -66,9 +68,9 @@ static struct virtio_pci_modern_device *vp_vdpa_to_mdev(struct vp_vdpa *vp_vdpa)
> >
> > static u64 vp_vdpa_get_device_features(struct vdpa_device *vdpa)
> > {
> > - struct virtio_pci_modern_device *mdev = vdpa_to_mdev(vdpa);
> > + struct vp_vdpa *vp_vdpa = vdpa_to_vp(vdpa);
> >
> > - return vp_modern_get_features(mdev);
> > + return vp_vdpa->device_features;
> > }
> >
> > static int vp_vdpa_set_driver_features(struct vdpa_device *vdpa, u64 features)
> > @@ -475,6 +477,7 @@ static int vp_vdpa_dev_add(struct vdpa_mgmt_dev *v_mdev, const char *name,
> > struct pci_dev *pdev = mdev->pci_dev;
> > struct device *dev = &pdev->dev;
> > struct vp_vdpa *vp_vdpa = NULL;
> > + u64 device_features;
> > int ret, i;
> >
> > vp_vdpa = vdpa_alloc_device(struct vp_vdpa, vdpa,
> > @@ -491,6 +494,14 @@ static int vp_vdpa_dev_add(struct vdpa_mgmt_dev *v_mdev, const char *name,
> > vp_vdpa->queues = vp_modern_get_num_queues(mdev);
> > vp_vdpa->mdev = mdev;
> >
> > + device_features = vp_modern_get_features(mdev);
> > + if (add_config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) {
> > + if (add_config->device_features & ~device_features)
> > + return -EINVAL;
> Should use "goto err" rather than direct return. Also, would be the best
> to tell user the reason why device creation is failing. In the other
> places of the same function, dev_err() or dev_warn() is used.
Right, let me fix this.
Thanks
>
> -Siwei
>
> > + device_features &= add_config->device_features;
> > + }
> > + vp_vdpa->device_features = device_features;
> > +
> > ret = devm_add_action_or_reset(dev, vp_vdpa_free_irq_vectors, pdev);
> > if (ret) {
> > dev_err(&pdev->dev,
> > @@ -599,6 +610,7 @@ static int vp_vdpa_probe(struct pci_dev *pdev, const struct pci_device_id *id)
> > mgtdev->id_table = mdev_id;
> > mgtdev->max_supported_vqs = vp_modern_get_num_queues(mdev);
> > mgtdev->supported_features = vp_modern_get_features(mdev);
> > + mgtdev->config_attr_mask = (1 << VDPA_ATTR_DEV_FEATURES);
> > pci_set_master(pdev);
> > pci_set_drvdata(pdev, vp_vdpa_mgtdev);
> >
>
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: [PATCH V2 3/3] vp_vdpa: support feature provisioning
@ 2022-09-26 7:14 ` Jason Wang
0 siblings, 0 replies; 55+ messages in thread
From: Jason Wang @ 2022-09-26 7:14 UTC (permalink / raw)
To: Si-Wei Liu
Cc: Cindy Lu, mst, Yongji Xie, linux-kernel, Gautam Dawar,
virtualization, eperezma, Wu Zongyong, Eli Cohen, Zhu Lingshan
On Sat, Sep 24, 2022 at 4:11 AM Si-Wei Liu <si-wei.liu@oracle.com> wrote:
>
>
>
> On 9/21/2022 7:43 PM, Jason Wang wrote:
> > This patch allows the device features to be provisioned via
> > netlink. This is done by:
> >
> > 1) validating the provisioned features to be a subset of the parent
> > features.
> > 2) clearing the features that is not wanted by the userspace
> >
> > For example:
> >
> > # vdpa mgmtdev show
> > pci/0000:02:00.0:
> > supported_classes net
> > max_supported_vqs 3
> > dev_features CSUM GUEST_CSUM CTRL_GUEST_OFFLOADS MAC GUEST_TSO4
> > GUEST_TSO6 GUEST_ECN GUEST_UFO HOST_TSO4 HOST_TSO6 HOST_ECN HOST_UFO
> > MRG_RXBUF STATUS CTRL_VQ CTRL_RX CTRL_VLAN CTRL_RX_EXTRA
> > GUEST_ANNOUNCE CTRL_MAC_ADDR RING_INDIRECT_DESC RING_EVENT_IDX
> > VERSION_1 ACCESS_PLATFORM
> >
> > 1) provision vDPA device with all features that are supported by the virtio-pci
> >
> > # vdpa dev add name dev1 mgmtdev pci/0000:02:00.0
> > # vdpa dev config show
> > dev1: mac 52:54:00:12:34:56 link up link_announce false mtu 65535
> > negotiated_features CSUM GUEST_CSUM CTRL_GUEST_OFFLOADS MAC
> > GUEST_TSO4 GUEST_TSO6 GUEST_ECN GUEST_UFO HOST_TSO4 HOST_TSO6
> > HOST_ECN HOST_UFO MRG_RXBUF STATUS CTRL_VQ CTRL_RX CTRL_VLAN
> > GUEST_ANNOUNCE CTRL_MAC_ADDR RING_INDIRECT_DESC RING_EVENT_IDX
> > VERSION_1 ACCESS_PLATFORM
> >
> > 2) provision vDPA device with a subset of the features
> >
> > # vdpa dev add name dev1 mgmtdev pci/0000:02:00.0 device_features 0x300020000
> > # dev1: mac 52:54:00:12:34:56 link up link_announce false mtu 65535
> > negotiated_features CTRL_VQ VERSION_1 ACCESS_PLATFORM
> >
> > Reviewed-by: Eli Cohen <elic@nvidia.com>
> > Signed-off-by: Jason Wang <jasowang@redhat.com>
> > ---
> > drivers/vdpa/virtio_pci/vp_vdpa.c | 16 ++++++++++++++--
> > 1 file changed, 14 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/vdpa/virtio_pci/vp_vdpa.c b/drivers/vdpa/virtio_pci/vp_vdpa.c
> > index 04522077735b..4b28e0c95ba2 100644
> > --- a/drivers/vdpa/virtio_pci/vp_vdpa.c
> > +++ b/drivers/vdpa/virtio_pci/vp_vdpa.c
> > @@ -17,6 +17,7 @@
> > #include <linux/virtio_ring.h>
> > #include <linux/virtio_pci.h>
> > #include <linux/virtio_pci_modern.h>
> > +#include <uapi/linux/vdpa.h>
> >
> > #define VP_VDPA_QUEUE_MAX 256
> > #define VP_VDPA_DRIVER_NAME "vp_vdpa"
> > @@ -35,6 +36,7 @@ struct vp_vdpa {
> > struct virtio_pci_modern_device *mdev;
> > struct vp_vring *vring;
> > struct vdpa_callback config_cb;
> > + u64 device_features;
> > char msix_name[VP_VDPA_NAME_SIZE];
> > int config_irq;
> > int queues;
> > @@ -66,9 +68,9 @@ static struct virtio_pci_modern_device *vp_vdpa_to_mdev(struct vp_vdpa *vp_vdpa)
> >
> > static u64 vp_vdpa_get_device_features(struct vdpa_device *vdpa)
> > {
> > - struct virtio_pci_modern_device *mdev = vdpa_to_mdev(vdpa);
> > + struct vp_vdpa *vp_vdpa = vdpa_to_vp(vdpa);
> >
> > - return vp_modern_get_features(mdev);
> > + return vp_vdpa->device_features;
> > }
> >
> > static int vp_vdpa_set_driver_features(struct vdpa_device *vdpa, u64 features)
> > @@ -475,6 +477,7 @@ static int vp_vdpa_dev_add(struct vdpa_mgmt_dev *v_mdev, const char *name,
> > struct pci_dev *pdev = mdev->pci_dev;
> > struct device *dev = &pdev->dev;
> > struct vp_vdpa *vp_vdpa = NULL;
> > + u64 device_features;
> > int ret, i;
> >
> > vp_vdpa = vdpa_alloc_device(struct vp_vdpa, vdpa,
> > @@ -491,6 +494,14 @@ static int vp_vdpa_dev_add(struct vdpa_mgmt_dev *v_mdev, const char *name,
> > vp_vdpa->queues = vp_modern_get_num_queues(mdev);
> > vp_vdpa->mdev = mdev;
> >
> > + device_features = vp_modern_get_features(mdev);
> > + if (add_config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) {
> > + if (add_config->device_features & ~device_features)
> > + return -EINVAL;
> Should use "goto err" rather than direct return. Also, would be the best
> to tell user the reason why device creation is failing. In the other
> places of the same function, dev_err() or dev_warn() is used.
Right, let me fix this.
Thanks
>
> -Siwei
>
> > + device_features &= add_config->device_features;
> > + }
> > + vp_vdpa->device_features = device_features;
> > +
> > ret = devm_add_action_or_reset(dev, vp_vdpa_free_irq_vectors, pdev);
> > if (ret) {
> > dev_err(&pdev->dev,
> > @@ -599,6 +610,7 @@ static int vp_vdpa_probe(struct pci_dev *pdev, const struct pci_device_id *id)
> > mgtdev->id_table = mdev_id;
> > mgtdev->max_supported_vqs = vp_modern_get_num_queues(mdev);
> > mgtdev->supported_features = vp_modern_get_features(mdev);
> > + mgtdev->config_attr_mask = (1 << VDPA_ATTR_DEV_FEATURES);
> > pci_set_master(pdev);
> > pci_set_drvdata(pdev, vp_vdpa_mgtdev);
> >
>
_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
2022-09-26 7:11 ` Jason Wang
(?)
(?)
@ 2022-09-27 1:01 ` Si-Wei Liu
2022-09-27 3:59 ` Jason Wang
-1 siblings, 1 reply; 55+ messages in thread
From: Si-Wei Liu @ 2022-09-27 1:01 UTC (permalink / raw)
To: Jason Wang
Cc: Cindy Lu, mst, Yongji Xie, linux-kernel, Gautam Dawar,
virtualization, eperezma, Wu Zongyong, Eli Cohen, Zhu Lingshan
[-- Attachment #1.1: Type: text/plain, Size: 6880 bytes --]
On 9/26/2022 12:11 AM, Jason Wang wrote:
> On Sat, Sep 24, 2022 at 4:01 AM Si-Wei Liu<si-wei.liu@oracle.com> wrote:
>>
>>
>> On 9/21/2022 7:43 PM, Jason Wang wrote:
>>> This patch implements features provisioning for vdpa_sim_net.
>>>
>>> 1) validating the provisioned features to be a subset of the parent
>>> features.
>>> 2) clearing the features that is not wanted by the userspace
>>>
>>> For example:
>>>
>>> # vdpa mgmtdev show
>>> vdpasim_net:
>>> supported_classes net
>>> max_supported_vqs 3
>>> dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM
>> Sighs, not to blame any one and it's perhaps too late, but this
>> "dev_features" attr in "mgmtdev show" command output should have been
>> called "supported_features" in the first place.
> Not sure I get this, but I guess this is the negotiated features actually.
Actually no, that is why I said the name is a bit confusing and
"supported_features" might sound better. This attribute in the parent
device (mgmtdev) denotes the real device capability for what virtio
features can be supported by the parent device. Any unprivileged user
can check into this field to know parent device's capability without
having to create a child vDPA device at all. The features that child
vDPA device may support should be a subset of, or at most up to what the
parent device offers. For e.g. the vdpa device dev1 you created below
can expose less or equal device_features bit than 0x308820028 (MTU MAC
CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM), but
shouldn't be no more than what the parent device can actually support.
>
> I think Ling Shan is working on reporting both negotiated features
> with the device features.
Does it imply this series is connected to another work in parallel? Is
it possible to add a reference in the cover letter?
>
>>> 1) provision vDPA device with all features that are supported by the
>>> net simulator
>>>
>>> # vdpa dev add name dev1 mgmtdev vdpasim_net
>>> # vdpa dev config show
>>> dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
>>> negotiated_features MTU MAC CTRL_VQ CTRL_MAC_ADDR VERSION_1 ACCESS_PLATFORM
>> Maybe not in this patch, but for completeness for the whole series,
>> could we also add device_features to the output?
> Lingshan, could you please share your thoughts or patch on this?
Noted here the device_features argument specified during vdpa creation
is introduced by this series itself, it somehow slightly changed the
original semantics of what device_features used to be.
>
>> When simply look at the "vdpa dev config show" output, I cannot really
>> tell the actual device_features that was used in vdpa creation. For e.g.
>> there is a missing feature ANY_LAYOUT from negotiated_features compared
>> with supported_features in mgmtdev, but the orchestration software
>> couldn't tell if the vdpa device on destination host should be created
>> with or without the ANY_LAYOUT feature.
> I think VERSION_1 implies ANY_LAYOUT.
Right, ANY_LAYOUT is a bad example. A good example might be that, I knew
the parent mgmtdev on migration source node supports CTRL_MAC_ADDR, but
I don't find it in negotiated_features. On the migration destination
node, the parent device does support all features as the source offers,
including CTRL_MAC_ADDR. What device features you would expect the mgmt
software to create destination vdpa device with, if not otherwise
*requiring mgmt software to remember all the arguments on device creation*?
SOURCE# vdpa mgmtdev show
vdpasim_net:
supported_classes net
max_supported_vqs 3
dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1
ACCESS_PLATFORM
SOURCE# vdpa dev config show
dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
negotiated_features MTU MAC CTRL_VQ VERSION_1 ACCESS_PLATFORM
DESTINATION# vdpa mgmtdev show
vdpasim_net:
supported_classes net
max_supported_vqs 3
dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1
ACCESS_PLATFORM
> But it should be sufficient to
> use features_src & feature_dst in this case. Actually, it should work
> similar as to the cpu flags, the management software should introduce
> the concept of cluster which means the maximal set of common features
> is calculated and provisioned during device creation to allow
> migration among the nodes inside the cluster.
Yes, this is one way mgmt software may implement, but I am not sure if
it's the only way. For e.g. for cpu flags, mgmt software can infer the
guest cpus features in use from all qemu command line arguments and host
cpu features/capability, which doesn't need to remember creation
arguments and is easy to recover from failure without having to make the
VM config persistent in data store. I thought it would be great if vdpa
CLI design could offer the same.
Thanks,
-Siwei
>
> Thanks
>
>> Thanks,
>> -Siwei
>>
>>
>>> 2) provision vDPA device with a subset of the features
>>>
>>> # vdpa dev add name dev1 mgmtdev vdpasim_net device_features 0x300020000
>>> # vdpa dev config show
>>> dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
>>> negotiated_features CTRL_VQ VERSION_1 ACCESS_PLATFORM
>>>
>>> Reviewed-by: Eli Cohen<elic@nvidia.com>
>>> Signed-off-by: Jason Wang<jasowang@redhat.com>
>>> ---
>>> drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 11 ++++++++++-
>>> 1 file changed, 10 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
>>> index 886449e88502..a9ba02be378b 100644
>>> --- a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
>>> +++ b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
>>> @@ -254,6 +254,14 @@ static int vdpasim_net_dev_add(struct vdpa_mgmt_dev *mdev, const char *name,
>>> dev_attr.work_fn = vdpasim_net_work;
>>> dev_attr.buffer_size = PAGE_SIZE;
>>>
>>> + if (config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) {
>>> + if (config->device_features &
>>> + ~dev_attr.supported_features)
>>> + return -EINVAL;
>>> + dev_attr.supported_features &=
>>> + config->device_features;
>>> + }
>>> +
>>> simdev = vdpasim_create(&dev_attr);
>>> if (IS_ERR(simdev))
>>> return PTR_ERR(simdev);
>>> @@ -294,7 +302,8 @@ static struct vdpa_mgmt_dev mgmt_dev = {
>>> .id_table = id_table,
>>> .ops = &vdpasim_net_mgmtdev_ops,
>>> .config_attr_mask = (1 << VDPA_ATTR_DEV_NET_CFG_MACADDR |
>>> - 1 << VDPA_ATTR_DEV_NET_CFG_MTU),
>>> + 1 << VDPA_ATTR_DEV_NET_CFG_MTU |
>>> + 1 << VDPA_ATTR_DEV_FEATURES),
>>> .max_supported_vqs = VDPASIM_NET_VQ_NUM,
>>> .supported_features = VDPASIM_NET_FEATURES,
>>> };
[-- Attachment #1.2: Type: text/html, Size: 9558 bytes --]
[-- Attachment #2: Type: text/plain, Size: 183 bytes --]
_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
2022-09-27 1:01 ` Si-Wei Liu
@ 2022-09-27 3:59 ` Jason Wang
0 siblings, 0 replies; 55+ messages in thread
From: Jason Wang @ 2022-09-27 3:59 UTC (permalink / raw)
To: Si-Wei Liu
Cc: mst, Eli Cohen, Parav Pandit, Wu Zongyong, virtualization,
linux-kernel, eperezma, Zhu Lingshan, Gautam Dawar, Cindy Lu,
Yongji Xie
On Tue, Sep 27, 2022 at 9:02 AM Si-Wei Liu <si-wei.liu@oracle.com> wrote:
>
>
>
> On 9/26/2022 12:11 AM, Jason Wang wrote:
>
> On Sat, Sep 24, 2022 at 4:01 AM Si-Wei Liu <si-wei.liu@oracle.com> wrote:
>
>
> On 9/21/2022 7:43 PM, Jason Wang wrote:
>
> This patch implements features provisioning for vdpa_sim_net.
>
> 1) validating the provisioned features to be a subset of the parent
> features.
> 2) clearing the features that is not wanted by the userspace
>
> For example:
>
> # vdpa mgmtdev show
> vdpasim_net:
> supported_classes net
> max_supported_vqs 3
> dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM
>
> Sighs, not to blame any one and it's perhaps too late, but this
> "dev_features" attr in "mgmtdev show" command output should have been
> called "supported_features" in the first place.
>
> Not sure I get this, but I guess this is the negotiated features actually.
>
> Actually no, that is why I said the name is a bit confusing and "supported_features" might sound better.
You're right, it's an mgmtdev show actually.
>This attribute in the parent device (mgmtdev) denotes the real device capability for what virtio features can be supported by the parent device. Any unprivileged user can check into this field to know parent device's capability without having to create a child vDPA device at all. The features that child vDPA device may support should be a subset of, or at most up to what the parent device offers. For e.g. the vdpa device dev1 you created below can expose less or equal device_features bit than 0x308820028 (MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM), but shouldn't be no more than what the parent device can actually support.
Yes, I didn't see anything wrong with "dev_features", it aligns to the
virtio spec which means the features could be used to create a vdpa
device. But if everyone agree on the renaming, I'm fine.
>
>
> I think Ling Shan is working on reporting both negotiated features
> with the device features.
>
> Does it imply this series is connected to another work in parallel? Is it possible to add a reference in the cover letter?
I'm not sure, I remember Ling Shan did some work to not block the
config show in this commit:
commit a34bed37fc9d3da319bb75dfbf02a7d3e95e12de
Author: Zhu Lingshan <lingshan.zhu@intel.com>
Date: Fri Jul 22 19:53:07 2022 +0800
vDPA: !FEATURES_OK should not block querying device config space
We need some changes in the vdpa tool to show device_features
unconditionally in the "dev config show" command.
>
>
> 1) provision vDPA device with all features that are supported by the
> net simulator
>
> # vdpa dev add name dev1 mgmtdev vdpasim_net
> # vdpa dev config show
> dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> negotiated_features MTU MAC CTRL_VQ CTRL_MAC_ADDR VERSION_1 ACCESS_PLATFORM
>
> Maybe not in this patch, but for completeness for the whole series,
> could we also add device_features to the output?
>
> Lingshan, could you please share your thoughts or patch on this?
>
> Noted here the device_features argument specified during vdpa creation is introduced by this series itself, it somehow slightly changed the original semantics of what device_features used to be.
I'm not sure I get this, we don't support device_features in the past
and it is used to provision device features to the vDPA device which
seems to be fine.
>
>
> When simply look at the "vdpa dev config show" output, I cannot really
> tell the actual device_features that was used in vdpa creation. For e.g.
> there is a missing feature ANY_LAYOUT from negotiated_features compared
> with supported_features in mgmtdev, but the orchestration software
> couldn't tell if the vdpa device on destination host should be created
> with or without the ANY_LAYOUT feature.
>
> I think VERSION_1 implies ANY_LAYOUT.
>
> Right, ANY_LAYOUT is a bad example. A good example might be that, I knew the parent mgmtdev on migration source node supports CTRL_MAC_ADDR, but I don't find it in negotiated_features.
I think we should use the features that we got from "mgmtdev show"
instead of "negotiated features".
>On the migration destination node, the parent device does support all features as the source offers, including CTRL_MAC_ADDR. What device features you would expect the mgmt software to create destination vdpa device with, if not otherwise requiring mgmt software to remember all the arguments on device creation?
So in this example, we need use "dev_features" so we get exact the
same features after and operation as either src or dst.
>
> SOURCE# vdpa mgmtdev show
> vdpasim_net:
> supported_classes net
> max_supported_vqs 3
> dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM
> SOURCE# vdpa dev config show
> dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> negotiated_features MTU MAC CTRL_VQ VERSION_1 ACCESS_PLATFORM
>
> DESTINATION# vdpa mgmtdev show
> vdpasim_net:
> supported_classes net
> max_supported_vqs 3
> dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM
>
> But it should be sufficient to
> use features_src & feature_dst in this case. Actually, it should work
> similar as to the cpu flags, the management software should introduce
> the concept of cluster which means the maximal set of common features
> is calculated and provisioned during device creation to allow
> migration among the nodes inside the cluster.
>
> Yes, this is one way mgmt software may implement, but I am not sure if it's the only way. For e.g. for cpu flags, mgmt software can infer the guest cpus features in use from all qemu command line arguments and host cpu features/capability, which doesn't need to remember creation arguments and is easy to recover from failure without having to make the VM config persistent in data store. I thought it would be great if vdpa CLI design could offer the same.
One minor difference is that we have cpu model abstraction, so we can
have things like:
./qemu-system-x86_64 -cpu EPYC
Which implies the cpu features/flags where vDPA doesn't have. But
consider it's just a 64bit (or 128 in the future), it doesn't seems to
be too complex for the management to know, we probably need to start
from this and then we can try to introduce some generation/model after
it is agreed on most of the vendors.
Thanks
>
> Thanks,
> -Siwei
>
>
> Thanks
>
> Thanks,
> -Siwei
>
>
> 2) provision vDPA device with a subset of the features
>
> # vdpa dev add name dev1 mgmtdev vdpasim_net device_features 0x300020000
> # vdpa dev config show
> dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> negotiated_features CTRL_VQ VERSION_1 ACCESS_PLATFORM
>
> Reviewed-by: Eli Cohen <elic@nvidia.com>
> Signed-off-by: Jason Wang <jasowang@redhat.com>
> ---
> drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 11 ++++++++++-
> 1 file changed, 10 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> index 886449e88502..a9ba02be378b 100644
> --- a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> +++ b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> @@ -254,6 +254,14 @@ static int vdpasim_net_dev_add(struct vdpa_mgmt_dev *mdev, const char *name,
> dev_attr.work_fn = vdpasim_net_work;
> dev_attr.buffer_size = PAGE_SIZE;
>
> + if (config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) {
> + if (config->device_features &
> + ~dev_attr.supported_features)
> + return -EINVAL;
> + dev_attr.supported_features &=
> + config->device_features;
> + }
> +
> simdev = vdpasim_create(&dev_attr);
> if (IS_ERR(simdev))
> return PTR_ERR(simdev);
> @@ -294,7 +302,8 @@ static struct vdpa_mgmt_dev mgmt_dev = {
> .id_table = id_table,
> .ops = &vdpasim_net_mgmtdev_ops,
> .config_attr_mask = (1 << VDPA_ATTR_DEV_NET_CFG_MACADDR |
> - 1 << VDPA_ATTR_DEV_NET_CFG_MTU),
> + 1 << VDPA_ATTR_DEV_NET_CFG_MTU |
> + 1 << VDPA_ATTR_DEV_FEATURES),
> .max_supported_vqs = VDPASIM_NET_VQ_NUM,
> .supported_features = VDPASIM_NET_FEATURES,
> };
>
>
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
@ 2022-09-27 3:59 ` Jason Wang
0 siblings, 0 replies; 55+ messages in thread
From: Jason Wang @ 2022-09-27 3:59 UTC (permalink / raw)
To: Si-Wei Liu
Cc: Cindy Lu, mst, Yongji Xie, linux-kernel, Gautam Dawar,
virtualization, eperezma, Wu Zongyong, Eli Cohen, Zhu Lingshan
On Tue, Sep 27, 2022 at 9:02 AM Si-Wei Liu <si-wei.liu@oracle.com> wrote:
>
>
>
> On 9/26/2022 12:11 AM, Jason Wang wrote:
>
> On Sat, Sep 24, 2022 at 4:01 AM Si-Wei Liu <si-wei.liu@oracle.com> wrote:
>
>
> On 9/21/2022 7:43 PM, Jason Wang wrote:
>
> This patch implements features provisioning for vdpa_sim_net.
>
> 1) validating the provisioned features to be a subset of the parent
> features.
> 2) clearing the features that is not wanted by the userspace
>
> For example:
>
> # vdpa mgmtdev show
> vdpasim_net:
> supported_classes net
> max_supported_vqs 3
> dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM
>
> Sighs, not to blame any one and it's perhaps too late, but this
> "dev_features" attr in "mgmtdev show" command output should have been
> called "supported_features" in the first place.
>
> Not sure I get this, but I guess this is the negotiated features actually.
>
> Actually no, that is why I said the name is a bit confusing and "supported_features" might sound better.
You're right, it's an mgmtdev show actually.
>This attribute in the parent device (mgmtdev) denotes the real device capability for what virtio features can be supported by the parent device. Any unprivileged user can check into this field to know parent device's capability without having to create a child vDPA device at all. The features that child vDPA device may support should be a subset of, or at most up to what the parent device offers. For e.g. the vdpa device dev1 you created below can expose less or equal device_features bit than 0x308820028 (MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM), but shouldn't be no more than what the parent device can actually support.
Yes, I didn't see anything wrong with "dev_features", it aligns to the
virtio spec which means the features could be used to create a vdpa
device. But if everyone agree on the renaming, I'm fine.
>
>
> I think Ling Shan is working on reporting both negotiated features
> with the device features.
>
> Does it imply this series is connected to another work in parallel? Is it possible to add a reference in the cover letter?
I'm not sure, I remember Ling Shan did some work to not block the
config show in this commit:
commit a34bed37fc9d3da319bb75dfbf02a7d3e95e12de
Author: Zhu Lingshan <lingshan.zhu@intel.com>
Date: Fri Jul 22 19:53:07 2022 +0800
vDPA: !FEATURES_OK should not block querying device config space
We need some changes in the vdpa tool to show device_features
unconditionally in the "dev config show" command.
>
>
> 1) provision vDPA device with all features that are supported by the
> net simulator
>
> # vdpa dev add name dev1 mgmtdev vdpasim_net
> # vdpa dev config show
> dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> negotiated_features MTU MAC CTRL_VQ CTRL_MAC_ADDR VERSION_1 ACCESS_PLATFORM
>
> Maybe not in this patch, but for completeness for the whole series,
> could we also add device_features to the output?
>
> Lingshan, could you please share your thoughts or patch on this?
>
> Noted here the device_features argument specified during vdpa creation is introduced by this series itself, it somehow slightly changed the original semantics of what device_features used to be.
I'm not sure I get this, we don't support device_features in the past
and it is used to provision device features to the vDPA device which
seems to be fine.
>
>
> When simply look at the "vdpa dev config show" output, I cannot really
> tell the actual device_features that was used in vdpa creation. For e.g.
> there is a missing feature ANY_LAYOUT from negotiated_features compared
> with supported_features in mgmtdev, but the orchestration software
> couldn't tell if the vdpa device on destination host should be created
> with or without the ANY_LAYOUT feature.
>
> I think VERSION_1 implies ANY_LAYOUT.
>
> Right, ANY_LAYOUT is a bad example. A good example might be that, I knew the parent mgmtdev on migration source node supports CTRL_MAC_ADDR, but I don't find it in negotiated_features.
I think we should use the features that we got from "mgmtdev show"
instead of "negotiated features".
>On the migration destination node, the parent device does support all features as the source offers, including CTRL_MAC_ADDR. What device features you would expect the mgmt software to create destination vdpa device with, if not otherwise requiring mgmt software to remember all the arguments on device creation?
So in this example, we need use "dev_features" so we get exact the
same features after and operation as either src or dst.
>
> SOURCE# vdpa mgmtdev show
> vdpasim_net:
> supported_classes net
> max_supported_vqs 3
> dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM
> SOURCE# vdpa dev config show
> dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> negotiated_features MTU MAC CTRL_VQ VERSION_1 ACCESS_PLATFORM
>
> DESTINATION# vdpa mgmtdev show
> vdpasim_net:
> supported_classes net
> max_supported_vqs 3
> dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM
>
> But it should be sufficient to
> use features_src & feature_dst in this case. Actually, it should work
> similar as to the cpu flags, the management software should introduce
> the concept of cluster which means the maximal set of common features
> is calculated and provisioned during device creation to allow
> migration among the nodes inside the cluster.
>
> Yes, this is one way mgmt software may implement, but I am not sure if it's the only way. For e.g. for cpu flags, mgmt software can infer the guest cpus features in use from all qemu command line arguments and host cpu features/capability, which doesn't need to remember creation arguments and is easy to recover from failure without having to make the VM config persistent in data store. I thought it would be great if vdpa CLI design could offer the same.
One minor difference is that we have cpu model abstraction, so we can
have things like:
./qemu-system-x86_64 -cpu EPYC
Which implies the cpu features/flags where vDPA doesn't have. But
consider it's just a 64bit (or 128 in the future), it doesn't seems to
be too complex for the management to know, we probably need to start
from this and then we can try to introduce some generation/model after
it is agreed on most of the vendors.
Thanks
>
> Thanks,
> -Siwei
>
>
> Thanks
>
> Thanks,
> -Siwei
>
>
> 2) provision vDPA device with a subset of the features
>
> # vdpa dev add name dev1 mgmtdev vdpasim_net device_features 0x300020000
> # vdpa dev config show
> dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> negotiated_features CTRL_VQ VERSION_1 ACCESS_PLATFORM
>
> Reviewed-by: Eli Cohen <elic@nvidia.com>
> Signed-off-by: Jason Wang <jasowang@redhat.com>
> ---
> drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 11 ++++++++++-
> 1 file changed, 10 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> index 886449e88502..a9ba02be378b 100644
> --- a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> +++ b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> @@ -254,6 +254,14 @@ static int vdpasim_net_dev_add(struct vdpa_mgmt_dev *mdev, const char *name,
> dev_attr.work_fn = vdpasim_net_work;
> dev_attr.buffer_size = PAGE_SIZE;
>
> + if (config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) {
> + if (config->device_features &
> + ~dev_attr.supported_features)
> + return -EINVAL;
> + dev_attr.supported_features &=
> + config->device_features;
> + }
> +
> simdev = vdpasim_create(&dev_attr);
> if (IS_ERR(simdev))
> return PTR_ERR(simdev);
> @@ -294,7 +302,8 @@ static struct vdpa_mgmt_dev mgmt_dev = {
> .id_table = id_table,
> .ops = &vdpasim_net_mgmtdev_ops,
> .config_attr_mask = (1 << VDPA_ATTR_DEV_NET_CFG_MACADDR |
> - 1 << VDPA_ATTR_DEV_NET_CFG_MTU),
> + 1 << VDPA_ATTR_DEV_NET_CFG_MTU |
> + 1 << VDPA_ATTR_DEV_FEATURES),
> .max_supported_vqs = VDPASIM_NET_VQ_NUM,
> .supported_features = VDPASIM_NET_FEATURES,
> };
>
>
_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
2022-09-27 3:59 ` Jason Wang
@ 2022-09-27 4:07 ` Jason Wang
-1 siblings, 0 replies; 55+ messages in thread
From: Jason Wang @ 2022-09-27 4:07 UTC (permalink / raw)
To: Si-Wei Liu
Cc: mst, Eli Cohen, Parav Pandit, Wu Zongyong, virtualization,
linux-kernel, eperezma, Zhu Lingshan, Gautam Dawar, Cindy Lu,
Yongji Xie
On Tue, Sep 27, 2022 at 11:59 AM Jason Wang <jasowang@redhat.com> wrote:
>
> On Tue, Sep 27, 2022 at 9:02 AM Si-Wei Liu <si-wei.liu@oracle.com> wrote:
> >
> >
> >
> > On 9/26/2022 12:11 AM, Jason Wang wrote:
> >
> > On Sat, Sep 24, 2022 at 4:01 AM Si-Wei Liu <si-wei.liu@oracle.com> wrote:
> >
> >
> > On 9/21/2022 7:43 PM, Jason Wang wrote:
> >
> > This patch implements features provisioning for vdpa_sim_net.
> >
> > 1) validating the provisioned features to be a subset of the parent
> > features.
> > 2) clearing the features that is not wanted by the userspace
> >
> > For example:
> >
> > # vdpa mgmtdev show
> > vdpasim_net:
> > supported_classes net
> > max_supported_vqs 3
> > dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM
> >
> > Sighs, not to blame any one and it's perhaps too late, but this
> > "dev_features" attr in "mgmtdev show" command output should have been
> > called "supported_features" in the first place.
> >
> > Not sure I get this, but I guess this is the negotiated features actually.
> >
> > Actually no, that is why I said the name is a bit confusing and "supported_features" might sound better.
>
> You're right, it's an mgmtdev show actually.
>
> >This attribute in the parent device (mgmtdev) denotes the real device capability for what virtio features can be supported by the parent device. Any unprivileged user can check into this field to know parent device's capability without having to create a child vDPA device at all. The features that child vDPA device may support should be a subset of, or at most up to what the parent device offers. For e.g. the vdpa device dev1 you created below can expose less or equal device_features bit than 0x308820028 (MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM), but shouldn't be no more than what the parent device can actually support.
>
> Yes, I didn't see anything wrong with "dev_features", it aligns to the
> virtio spec which means the features could be used to create a vdpa
> device. But if everyone agree on the renaming, I'm fine.
>
> >
> >
> > I think Ling Shan is working on reporting both negotiated features
> > with the device features.
> >
> > Does it imply this series is connected to another work in parallel? Is it possible to add a reference in the cover letter?
>
> I'm not sure, I remember Ling Shan did some work to not block the
> config show in this commit:
>
> commit a34bed37fc9d3da319bb75dfbf02a7d3e95e12de
> Author: Zhu Lingshan <lingshan.zhu@intel.com>
> Date: Fri Jul 22 19:53:07 2022 +0800
>
> vDPA: !FEATURES_OK should not block querying device config space
>
> We need some changes in the vdpa tool to show device_features
> unconditionally in the "dev config show" command.
Ok, Lingshan post an example here:
https://lore.kernel.org/netdev/20220927025035.4972-2-lingshan.zhu@intel.com/T/#u
Thanks
>
> >
> >
> > 1) provision vDPA device with all features that are supported by the
> > net simulator
> >
> > # vdpa dev add name dev1 mgmtdev vdpasim_net
> > # vdpa dev config show
> > dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> > negotiated_features MTU MAC CTRL_VQ CTRL_MAC_ADDR VERSION_1 ACCESS_PLATFORM
> >
> > Maybe not in this patch, but for completeness for the whole series,
> > could we also add device_features to the output?
> >
> > Lingshan, could you please share your thoughts or patch on this?
> >
> > Noted here the device_features argument specified during vdpa creation is introduced by this series itself, it somehow slightly changed the original semantics of what device_features used to be.
>
> I'm not sure I get this, we don't support device_features in the past
> and it is used to provision device features to the vDPA device which
> seems to be fine.
>
> >
> >
> > When simply look at the "vdpa dev config show" output, I cannot really
> > tell the actual device_features that was used in vdpa creation. For e.g.
> > there is a missing feature ANY_LAYOUT from negotiated_features compared
> > with supported_features in mgmtdev, but the orchestration software
> > couldn't tell if the vdpa device on destination host should be created
> > with or without the ANY_LAYOUT feature.
> >
> > I think VERSION_1 implies ANY_LAYOUT.
> >
> > Right, ANY_LAYOUT is a bad example. A good example might be that, I knew the parent mgmtdev on migration source node supports CTRL_MAC_ADDR, but I don't find it in negotiated_features.
>
> I think we should use the features that we got from "mgmtdev show"
> instead of "negotiated features".
>
> >On the migration destination node, the parent device does support all features as the source offers, including CTRL_MAC_ADDR. What device features you would expect the mgmt software to create destination vdpa device with, if not otherwise requiring mgmt software to remember all the arguments on device creation?
>
> So in this example, we need use "dev_features" so we get exact the
> same features after and operation as either src or dst.
>
> >
> > SOURCE# vdpa mgmtdev show
> > vdpasim_net:
> > supported_classes net
> > max_supported_vqs 3
> > dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM
> > SOURCE# vdpa dev config show
> > dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> > negotiated_features MTU MAC CTRL_VQ VERSION_1 ACCESS_PLATFORM
> >
> > DESTINATION# vdpa mgmtdev show
> > vdpasim_net:
> > supported_classes net
> > max_supported_vqs 3
> > dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM
> >
> > But it should be sufficient to
> > use features_src & feature_dst in this case. Actually, it should work
> > similar as to the cpu flags, the management software should introduce
> > the concept of cluster which means the maximal set of common features
> > is calculated and provisioned during device creation to allow
> > migration among the nodes inside the cluster.
> >
> > Yes, this is one way mgmt software may implement, but I am not sure if it's the only way. For e.g. for cpu flags, mgmt software can infer the guest cpus features in use from all qemu command line arguments and host cpu features/capability, which doesn't need to remember creation arguments and is easy to recover from failure without having to make the VM config persistent in data store. I thought it would be great if vdpa CLI design could offer the same.
>
> One minor difference is that we have cpu model abstraction, so we can
> have things like:
>
> ./qemu-system-x86_64 -cpu EPYC
>
> Which implies the cpu features/flags where vDPA doesn't have. But
> consider it's just a 64bit (or 128 in the future), it doesn't seems to
> be too complex for the management to know, we probably need to start
> from this and then we can try to introduce some generation/model after
> it is agreed on most of the vendors.
>
> Thanks
>
> >
> > Thanks,
> > -Siwei
> >
> >
> > Thanks
> >
> > Thanks,
> > -Siwei
> >
> >
> > 2) provision vDPA device with a subset of the features
> >
> > # vdpa dev add name dev1 mgmtdev vdpasim_net device_features 0x300020000
> > # vdpa dev config show
> > dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> > negotiated_features CTRL_VQ VERSION_1 ACCESS_PLATFORM
> >
> > Reviewed-by: Eli Cohen <elic@nvidia.com>
> > Signed-off-by: Jason Wang <jasowang@redhat.com>
> > ---
> > drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 11 ++++++++++-
> > 1 file changed, 10 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > index 886449e88502..a9ba02be378b 100644
> > --- a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > +++ b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > @@ -254,6 +254,14 @@ static int vdpasim_net_dev_add(struct vdpa_mgmt_dev *mdev, const char *name,
> > dev_attr.work_fn = vdpasim_net_work;
> > dev_attr.buffer_size = PAGE_SIZE;
> >
> > + if (config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) {
> > + if (config->device_features &
> > + ~dev_attr.supported_features)
> > + return -EINVAL;
> > + dev_attr.supported_features &=
> > + config->device_features;
> > + }
> > +
> > simdev = vdpasim_create(&dev_attr);
> > if (IS_ERR(simdev))
> > return PTR_ERR(simdev);
> > @@ -294,7 +302,8 @@ static struct vdpa_mgmt_dev mgmt_dev = {
> > .id_table = id_table,
> > .ops = &vdpasim_net_mgmtdev_ops,
> > .config_attr_mask = (1 << VDPA_ATTR_DEV_NET_CFG_MACADDR |
> > - 1 << VDPA_ATTR_DEV_NET_CFG_MTU),
> > + 1 << VDPA_ATTR_DEV_NET_CFG_MTU |
> > + 1 << VDPA_ATTR_DEV_FEATURES),
> > .max_supported_vqs = VDPASIM_NET_VQ_NUM,
> > .supported_features = VDPASIM_NET_FEATURES,
> > };
> >
> >
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
@ 2022-09-27 4:07 ` Jason Wang
0 siblings, 0 replies; 55+ messages in thread
From: Jason Wang @ 2022-09-27 4:07 UTC (permalink / raw)
To: Si-Wei Liu
Cc: Cindy Lu, mst, Yongji Xie, linux-kernel, Gautam Dawar,
virtualization, eperezma, Wu Zongyong, Eli Cohen, Zhu Lingshan
On Tue, Sep 27, 2022 at 11:59 AM Jason Wang <jasowang@redhat.com> wrote:
>
> On Tue, Sep 27, 2022 at 9:02 AM Si-Wei Liu <si-wei.liu@oracle.com> wrote:
> >
> >
> >
> > On 9/26/2022 12:11 AM, Jason Wang wrote:
> >
> > On Sat, Sep 24, 2022 at 4:01 AM Si-Wei Liu <si-wei.liu@oracle.com> wrote:
> >
> >
> > On 9/21/2022 7:43 PM, Jason Wang wrote:
> >
> > This patch implements features provisioning for vdpa_sim_net.
> >
> > 1) validating the provisioned features to be a subset of the parent
> > features.
> > 2) clearing the features that is not wanted by the userspace
> >
> > For example:
> >
> > # vdpa mgmtdev show
> > vdpasim_net:
> > supported_classes net
> > max_supported_vqs 3
> > dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM
> >
> > Sighs, not to blame any one and it's perhaps too late, but this
> > "dev_features" attr in "mgmtdev show" command output should have been
> > called "supported_features" in the first place.
> >
> > Not sure I get this, but I guess this is the negotiated features actually.
> >
> > Actually no, that is why I said the name is a bit confusing and "supported_features" might sound better.
>
> You're right, it's an mgmtdev show actually.
>
> >This attribute in the parent device (mgmtdev) denotes the real device capability for what virtio features can be supported by the parent device. Any unprivileged user can check into this field to know parent device's capability without having to create a child vDPA device at all. The features that child vDPA device may support should be a subset of, or at most up to what the parent device offers. For e.g. the vdpa device dev1 you created below can expose less or equal device_features bit than 0x308820028 (MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM), but shouldn't be no more than what the parent device can actually support.
>
> Yes, I didn't see anything wrong with "dev_features", it aligns to the
> virtio spec which means the features could be used to create a vdpa
> device. But if everyone agree on the renaming, I'm fine.
>
> >
> >
> > I think Ling Shan is working on reporting both negotiated features
> > with the device features.
> >
> > Does it imply this series is connected to another work in parallel? Is it possible to add a reference in the cover letter?
>
> I'm not sure, I remember Ling Shan did some work to not block the
> config show in this commit:
>
> commit a34bed37fc9d3da319bb75dfbf02a7d3e95e12de
> Author: Zhu Lingshan <lingshan.zhu@intel.com>
> Date: Fri Jul 22 19:53:07 2022 +0800
>
> vDPA: !FEATURES_OK should not block querying device config space
>
> We need some changes in the vdpa tool to show device_features
> unconditionally in the "dev config show" command.
Ok, Lingshan post an example here:
https://lore.kernel.org/netdev/20220927025035.4972-2-lingshan.zhu@intel.com/T/#u
Thanks
>
> >
> >
> > 1) provision vDPA device with all features that are supported by the
> > net simulator
> >
> > # vdpa dev add name dev1 mgmtdev vdpasim_net
> > # vdpa dev config show
> > dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> > negotiated_features MTU MAC CTRL_VQ CTRL_MAC_ADDR VERSION_1 ACCESS_PLATFORM
> >
> > Maybe not in this patch, but for completeness for the whole series,
> > could we also add device_features to the output?
> >
> > Lingshan, could you please share your thoughts or patch on this?
> >
> > Noted here the device_features argument specified during vdpa creation is introduced by this series itself, it somehow slightly changed the original semantics of what device_features used to be.
>
> I'm not sure I get this, we don't support device_features in the past
> and it is used to provision device features to the vDPA device which
> seems to be fine.
>
> >
> >
> > When simply look at the "vdpa dev config show" output, I cannot really
> > tell the actual device_features that was used in vdpa creation. For e.g.
> > there is a missing feature ANY_LAYOUT from negotiated_features compared
> > with supported_features in mgmtdev, but the orchestration software
> > couldn't tell if the vdpa device on destination host should be created
> > with or without the ANY_LAYOUT feature.
> >
> > I think VERSION_1 implies ANY_LAYOUT.
> >
> > Right, ANY_LAYOUT is a bad example. A good example might be that, I knew the parent mgmtdev on migration source node supports CTRL_MAC_ADDR, but I don't find it in negotiated_features.
>
> I think we should use the features that we got from "mgmtdev show"
> instead of "negotiated features".
>
> >On the migration destination node, the parent device does support all features as the source offers, including CTRL_MAC_ADDR. What device features you would expect the mgmt software to create destination vdpa device with, if not otherwise requiring mgmt software to remember all the arguments on device creation?
>
> So in this example, we need use "dev_features" so we get exact the
> same features after and operation as either src or dst.
>
> >
> > SOURCE# vdpa mgmtdev show
> > vdpasim_net:
> > supported_classes net
> > max_supported_vqs 3
> > dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM
> > SOURCE# vdpa dev config show
> > dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> > negotiated_features MTU MAC CTRL_VQ VERSION_1 ACCESS_PLATFORM
> >
> > DESTINATION# vdpa mgmtdev show
> > vdpasim_net:
> > supported_classes net
> > max_supported_vqs 3
> > dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM
> >
> > But it should be sufficient to
> > use features_src & feature_dst in this case. Actually, it should work
> > similar as to the cpu flags, the management software should introduce
> > the concept of cluster which means the maximal set of common features
> > is calculated and provisioned during device creation to allow
> > migration among the nodes inside the cluster.
> >
> > Yes, this is one way mgmt software may implement, but I am not sure if it's the only way. For e.g. for cpu flags, mgmt software can infer the guest cpus features in use from all qemu command line arguments and host cpu features/capability, which doesn't need to remember creation arguments and is easy to recover from failure without having to make the VM config persistent in data store. I thought it would be great if vdpa CLI design could offer the same.
>
> One minor difference is that we have cpu model abstraction, so we can
> have things like:
>
> ./qemu-system-x86_64 -cpu EPYC
>
> Which implies the cpu features/flags where vDPA doesn't have. But
> consider it's just a 64bit (or 128 in the future), it doesn't seems to
> be too complex for the management to know, we probably need to start
> from this and then we can try to introduce some generation/model after
> it is agreed on most of the vendors.
>
> Thanks
>
> >
> > Thanks,
> > -Siwei
> >
> >
> > Thanks
> >
> > Thanks,
> > -Siwei
> >
> >
> > 2) provision vDPA device with a subset of the features
> >
> > # vdpa dev add name dev1 mgmtdev vdpasim_net device_features 0x300020000
> > # vdpa dev config show
> > dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> > negotiated_features CTRL_VQ VERSION_1 ACCESS_PLATFORM
> >
> > Reviewed-by: Eli Cohen <elic@nvidia.com>
> > Signed-off-by: Jason Wang <jasowang@redhat.com>
> > ---
> > drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 11 ++++++++++-
> > 1 file changed, 10 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > index 886449e88502..a9ba02be378b 100644
> > --- a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > +++ b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> > @@ -254,6 +254,14 @@ static int vdpasim_net_dev_add(struct vdpa_mgmt_dev *mdev, const char *name,
> > dev_attr.work_fn = vdpasim_net_work;
> > dev_attr.buffer_size = PAGE_SIZE;
> >
> > + if (config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) {
> > + if (config->device_features &
> > + ~dev_attr.supported_features)
> > + return -EINVAL;
> > + dev_attr.supported_features &=
> > + config->device_features;
> > + }
> > +
> > simdev = vdpasim_create(&dev_attr);
> > if (IS_ERR(simdev))
> > return PTR_ERR(simdev);
> > @@ -294,7 +302,8 @@ static struct vdpa_mgmt_dev mgmt_dev = {
> > .id_table = id_table,
> > .ops = &vdpasim_net_mgmtdev_ops,
> > .config_attr_mask = (1 << VDPA_ATTR_DEV_NET_CFG_MACADDR |
> > - 1 << VDPA_ATTR_DEV_NET_CFG_MTU),
> > + 1 << VDPA_ATTR_DEV_NET_CFG_MTU |
> > + 1 << VDPA_ATTR_DEV_FEATURES),
> > .max_supported_vqs = VDPASIM_NET_VQ_NUM,
> > .supported_features = VDPASIM_NET_FEATURES,
> > };
> >
> >
_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
2022-09-27 3:59 ` Jason Wang
(?)
(?)
@ 2022-09-27 9:41 ` Si-Wei Liu
2022-09-29 4:55 ` Jason Wang
-1 siblings, 1 reply; 55+ messages in thread
From: Si-Wei Liu @ 2022-09-27 9:41 UTC (permalink / raw)
To: Jason Wang
Cc: Cindy Lu, mst, Yongji Xie, linux-kernel, Gautam Dawar,
virtualization, eperezma, Wu Zongyong, Eli Cohen, Zhu Lingshan
[-- Attachment #1.1: Type: text/plain, Size: 13692 bytes --]
On 9/26/2022 8:59 PM, Jason Wang wrote:
> On Tue, Sep 27, 2022 at 9:02 AM Si-Wei Liu<si-wei.liu@oracle.com> wrote:
>>
>>
>> On 9/26/2022 12:11 AM, Jason Wang wrote:
>>
>> On Sat, Sep 24, 2022 at 4:01 AM Si-Wei Liu<si-wei.liu@oracle.com> wrote:
>>
>>
>> On 9/21/2022 7:43 PM, Jason Wang wrote:
>>
>> This patch implements features provisioning for vdpa_sim_net.
>>
>> 1) validating the provisioned features to be a subset of the parent
>> features.
>> 2) clearing the features that is not wanted by the userspace
>>
>> For example:
>>
>> # vdpa mgmtdev show
>> vdpasim_net:
>> supported_classes net
>> max_supported_vqs 3
>> dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM
>>
>> Sighs, not to blame any one and it's perhaps too late, but this
>> "dev_features" attr in "mgmtdev show" command output should have been
>> called "supported_features" in the first place.
>>
>> Not sure I get this, but I guess this is the negotiated features actually.
>>
>> Actually no, that is why I said the name is a bit confusing and "supported_features" might sound better.
> You're right, it's an mgmtdev show actually.
>
>> This attribute in the parent device (mgmtdev) denotes the real device capability for what virtio features can be supported by the parent device. Any unprivileged user can check into this field to know parent device's capability without having to create a child vDPA device at all. The features that child vDPA device may support should be a subset of, or at most up to what the parent device offers. For e.g. the vdpa device dev1 you created below can expose less or equal device_features bit than 0x308820028 (MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM), but shouldn't be no more than what the parent device can actually support.
> Yes, I didn't see anything wrong with "dev_features",
Yep, it didn't appear to me anything wrong either at first sight, then I
gave my R-b on the series introduced this attribute. But it's not a
perfect name, either, on the other hand. Parav later pointed out that
the corresponding enum definition for this attribute should follow
pre-existing naming convention that we should perhaps do
s/VDPA_ATTR_DEV_SUPPORTED_FEATURES/VDPA_ATTR_MGMTDEV_SUPPORTED_FEATURES/
to get it renamed, as this is a mgmtdev level attribute, which I agree.
Now that with the upcoming "device_features" attribute (vdpa dev level)
from this series, it's subject to another confusions between these two
similar names, but actually would represent things at different level.
While all other attributes in "mgmtdev dev show" seem to be aligned with
the "supported_" prefix, e.g. supported_classes, max_supported_vqs, from
which I think the stance of device is already implied through "mgmtdev"
in the command. For the perspective of clarify and easy distinction,
"supported_features" seems to be a better name than "dev_features".
> it aligns to the
> virtio spec which means the features could be used to create a vdpa
> device. But if everyone agree on the renaming, I'm fine.
Never mind, if it's late don't have to bother.
>
>>
>> I think Ling Shan is working on reporting both negotiated features
>> with the device features.
>>
>> Does it imply this series is connected to another work in parallel? Is it possible to add a reference in the cover letter?
> I'm not sure, I remember Ling Shan did some work to not block the
> config show in this commit:
>
> commit a34bed37fc9d3da319bb75dfbf02a7d3e95e12de
> Author: Zhu Lingshan<lingshan.zhu@intel.com>
> Date: Fri Jul 22 19:53:07 2022 +0800
>
> vDPA: !FEATURES_OK should not block querying device config space
>
> We need some changes in the vdpa tool to show device_features
> unconditionally in the "dev config show" command.
That's true, I think I ever pointed it out to Lingshan before, that it's
not needed to bother exposing those config space fields in "dev config
show" output, if the only intent is for live migration of device
features between nodes. For vDPA live migration, what cares most is
those configuration parameters specified on vdpa creation, and userspace
VMM (QEMU) is supposed to take care of saving and restoring live device
states. I think it's easier to extend "vdpa dev show" output to include
device_features and other config params as well, rather than count on
validity of various config space fields.
https://lore.kernel.org/virtualization/454bdf1b-daa1-aa67-2b8c-bc15351c1851@oracle.com/
It's not just insufficient, but sometimes is incorrect to create vDPA
device using the config space fields. For instance, MAC address in
config space can be changed temporarily (until device reset) via ctrl_vq
VIRTIO_NET_CTRL_MAC_ADDR_SET command. It's incorrect to create vDPA
using the MAC address shown in the config space. Another example, if
the source vDPA device has MAC address table size limit of 100, then in
the destination we should pick parent device with size limit no smaller
than that, and create vDPA on remote node matching the exact same size.
There's nothing config space field can assist here.
One example further, in the future, if we are going to introduce
mandatory feature (for e.g. VERSION_1, RING_PACKED) that the device is
unable to support the opposite case, the destination device should be
created with equally same mandatory device features, which only vDPA
creation parameters should matter. While I can't think of a case that
the mgmt software or live migration tool would have to count on config
space fields only.
>
>>
>> 1) provision vDPA device with all features that are supported by the
>> net simulator
>>
>> # vdpa dev add name dev1 mgmtdev vdpasim_net
>> # vdpa dev config show
>> dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
>> negotiated_features MTU MAC CTRL_VQ CTRL_MAC_ADDR VERSION_1 ACCESS_PLATFORM
>>
>> Maybe not in this patch, but for completeness for the whole series,
>> could we also add device_features to the output?
>>
>> Lingshan, could you please share your thoughts or patch on this?
>>
>> Noted here the device_features argument specified during vdpa creation is introduced by this series itself, it somehow slightly changed the original semantics of what device_features used to be.
> I'm not sure I get this, we don't support device_features in the past
> and it is used to provision device features to the vDPA device which
> seems to be fine.
Before this change, only look at the dev_features in "mgmtdev show" and
remember creation parameters is sufficient to get to all needed info for
creating vDPA at destination. After this change, dev_features in
"mgmtdev show" becomes less relevant, as it would need to remember vdpa
creation parameters plus the device_features attribute. While this
series allows cross vendor live migration, it would complicate the
implementation of mgmt software, on the other hand.
>
>>
>> When simply look at the "vdpa dev config show" output, I cannot really
>> tell the actual device_features that was used in vdpa creation. For e.g.
>> there is a missing feature ANY_LAYOUT from negotiated_features compared
>> with supported_features in mgmtdev, but the orchestration software
>> couldn't tell if the vdpa device on destination host should be created
>> with or without the ANY_LAYOUT feature.
>>
>> I think VERSION_1 implies ANY_LAYOUT.
>>
>> Right, ANY_LAYOUT is a bad example. A good example might be that, I knew the parent mgmtdev on migration source node supports CTRL_MAC_ADDR, but I don't find it in negotiated_features.
> I think we should use the features that we got from "mgmtdev show"
> instead of "negotiated features".
That was how it's supposed to work previously, but with this series, I
think the newly introduced device_features will be needed instead of the
one in "mgmtdev show".
>
>> On the migration destination node, the parent device does support all features as the source offers, including CTRL_MAC_ADDR. What device features you would expect the mgmt software to create destination vdpa device with, if not otherwise requiring mgmt software to remember all the arguments on device creation?
> So in this example, we need use "dev_features" so we get exact the
> same features after and operation as either src or dst.
If the device_features vDPA created with at the source doesn't include
CTRL_MAC_ADDR even though parent supports it, then the vDPA to be
created at the destination shouldn't come with CTRL_MAC_ADDR either,
regardless of whether or not CTRL_MAC_ADDR is present in destination
"mgmtdev show".
However, if just taking look at negotiated_features, some mgmt software
implementations which don't persist the creation parameters can't get
the device features a certain vDPA device at the source node was created
with.
>
>> SOURCE# vdpa mgmtdev show
>> vdpasim_net:
>> supported_classes net
>> max_supported_vqs 3
>> dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM
>> SOURCE# vdpa dev config show
>> dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
>> negotiated_features MTU MAC CTRL_VQ VERSION_1 ACCESS_PLATFORM
>>
>> DESTINATION# vdpa mgmtdev show
>> vdpasim_net:
>> supported_classes net
>> max_supported_vqs 3
>> dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM
>>
>> But it should be sufficient to
>> use features_src & feature_dst in this case. Actually, it should work
>> similar as to the cpu flags, the management software should introduce
>> the concept of cluster which means the maximal set of common features
>> is calculated and provisioned during device creation to allow
>> migration among the nodes inside the cluster.
>>
>> Yes, this is one way mgmt software may implement, but I am not sure if it's the only way. For e.g. for cpu flags, mgmt software can infer the guest cpus features in use from all qemu command line arguments and host cpu features/capability, which doesn't need to remember creation arguments and is easy to recover from failure without having to make the VM config persistent in data store. I thought it would be great if vdpa CLI design could offer the same.
> One minor difference is that we have cpu model abstraction, so we can
> have things like:
>
> ./qemu-system-x86_64 -cpu EPYC
>
> Which implies the cpu features/flags where vDPA doesn't have. But
> consider it's just a 64bit (or 128 in the future), it doesn't seems to
> be too complex for the management to know, we probably need to start
> from this and then we can try to introduce some generation/model after
> it is agreed on most of the vendors.
What you refer to is the so-called named model for CPU flags. I think
it's a good addition to have some generation or named model defined for
vDPA. But I don't get the point for how it relates to exposing the
actual value of device features? Are you saying in this case you'd
rather expose the model name than the actual value of feature bits?
Well, I think we can expose both in different fields when there's really
such a need.
BTW with regard to the cpu model in mgmt software implementation, the
one implemented in libvirt is a mixed "Host model" [1] with taking
advantage of QEMU named model and exposing additional individual CPU
features that gets close to what host CPU offers. I think this implies
that mgmt software should have to understand what the model name really
means in terms of individual CPU features, so having feature bit value
exposed will just do more help if vDPA goes the same way.
Regards,
-Siwei
[1]
https://qemu-project.gitlab.io/qemu/system/qemu-cpu-models.html#two-ways-to-configure-cpu-models-with-qemu-kvm
>
> Thanks
>
>> Thanks,
>> -Siwei
>>
>>
>> Thanks
>>
>> Thanks,
>> -Siwei
>>
>>
>> 2) provision vDPA device with a subset of the features
>>
>> # vdpa dev add name dev1 mgmtdev vdpasim_net device_features 0x300020000
>> # vdpa dev config show
>> dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
>> negotiated_features CTRL_VQ VERSION_1 ACCESS_PLATFORM
>>
>> Reviewed-by: Eli Cohen<elic@nvidia.com>
>> Signed-off-by: Jason Wang<jasowang@redhat.com>
>> ---
>> drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 11 ++++++++++-
>> 1 file changed, 10 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
>> index 886449e88502..a9ba02be378b 100644
>> --- a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
>> +++ b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
>> @@ -254,6 +254,14 @@ static int vdpasim_net_dev_add(struct vdpa_mgmt_dev *mdev, const char *name,
>> dev_attr.work_fn = vdpasim_net_work;
>> dev_attr.buffer_size = PAGE_SIZE;
>>
>> + if (config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) {
>> + if (config->device_features &
>> + ~dev_attr.supported_features)
>> + return -EINVAL;
>> + dev_attr.supported_features &=
>> + config->device_features;
>> + }
>> +
>> simdev = vdpasim_create(&dev_attr);
>> if (IS_ERR(simdev))
>> return PTR_ERR(simdev);
>> @@ -294,7 +302,8 @@ static struct vdpa_mgmt_dev mgmt_dev = {
>> .id_table = id_table,
>> .ops = &vdpasim_net_mgmtdev_ops,
>> .config_attr_mask = (1 << VDPA_ATTR_DEV_NET_CFG_MACADDR |
>> - 1 << VDPA_ATTR_DEV_NET_CFG_MTU),
>> + 1 << VDPA_ATTR_DEV_NET_CFG_MTU |
>> + 1 << VDPA_ATTR_DEV_FEATURES),
>> .max_supported_vqs = VDPASIM_NET_VQ_NUM,
>> .supported_features = VDPASIM_NET_FEATURES,
>> };
>>
>>
[-- Attachment #1.2: Type: text/html, Size: 17412 bytes --]
[-- Attachment #2: Type: text/plain, Size: 183 bytes --]
_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
2022-09-27 4:07 ` Jason Wang
(?)
@ 2022-09-27 10:00 ` Si-Wei Liu
2022-09-29 4:10 ` Jason Wang
-1 siblings, 1 reply; 55+ messages in thread
From: Si-Wei Liu @ 2022-09-27 10:00 UTC (permalink / raw)
To: Jason Wang, Parav Pandit
Cc: Cindy Lu, mst, Yongji Xie, linux-kernel, Gautam Dawar,
virtualization, eperezma, Wu Zongyong, Eli Cohen, Zhu Lingshan
[-- Attachment #1.1: Type: text/plain, Size: 9561 bytes --]
On 9/26/2022 9:07 PM, Jason Wang wrote:
> On Tue, Sep 27, 2022 at 11:59 AM Jason Wang<jasowang@redhat.com> wrote:
>> On Tue, Sep 27, 2022 at 9:02 AM Si-Wei Liu<si-wei.liu@oracle.com> wrote:
>>>
>>>
>>> On 9/26/2022 12:11 AM, Jason Wang wrote:
>>>
>>> On Sat, Sep 24, 2022 at 4:01 AM Si-Wei Liu<si-wei.liu@oracle.com> wrote:
>>>
>>>
>>> On 9/21/2022 7:43 PM, Jason Wang wrote:
>>>
>>> This patch implements features provisioning for vdpa_sim_net.
>>>
>>> 1) validating the provisioned features to be a subset of the parent
>>> features.
>>> 2) clearing the features that is not wanted by the userspace
>>>
>>> For example:
>>>
>>> # vdpa mgmtdev show
>>> vdpasim_net:
>>> supported_classes net
>>> max_supported_vqs 3
>>> dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM
>>>
>>> Sighs, not to blame any one and it's perhaps too late, but this
>>> "dev_features" attr in "mgmtdev show" command output should have been
>>> called "supported_features" in the first place.
>>>
>>> Not sure I get this, but I guess this is the negotiated features actually.
>>>
>>> Actually no, that is why I said the name is a bit confusing and "supported_features" might sound better.
>> You're right, it's an mgmtdev show actually.
>>
>>> This attribute in the parent device (mgmtdev) denotes the real device capability for what virtio features can be supported by the parent device. Any unprivileged user can check into this field to know parent device's capability without having to create a child vDPA device at all. The features that child vDPA device may support should be a subset of, or at most up to what the parent device offers. For e.g. the vdpa device dev1 you created below can expose less or equal device_features bit than 0x308820028 (MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM), but shouldn't be no more than what the parent device can actually support.
>> Yes, I didn't see anything wrong with "dev_features", it aligns to the
>> virtio spec which means the features could be used to create a vdpa
>> device. But if everyone agree on the renaming, I'm fine.
>>
>>>
>>> I think Ling Shan is working on reporting both negotiated features
>>> with the device features.
>>>
>>> Does it imply this series is connected to another work in parallel? Is it possible to add a reference in the cover letter?
>> I'm not sure, I remember Ling Shan did some work to not block the
>> config show in this commit:
>>
>> commit a34bed37fc9d3da319bb75dfbf02a7d3e95e12de
>> Author: Zhu Lingshan<lingshan.zhu@intel.com>
>> Date: Fri Jul 22 19:53:07 2022 +0800
>>
>> vDPA: !FEATURES_OK should not block querying device config space
>>
>> We need some changes in the vdpa tool to show device_features
>> unconditionally in the "dev config show" command.
> Ok, Lingshan post an example here:
>
> https://lore.kernel.org/netdev/20220927025035.4972-2-lingshan.zhu@intel.com/T/#u
As I explained in the other email, it's incorrect to count on config
space fields to export vDPA attributes for live migration. If anyone
thinks that is not true, think again.
Additionally Parav already repeatedly pointed out quite a few times, we
have a lot of (quasi-)duplicated attributes with similar names,
VDPA_ATTR_DEV_SUPPORTED_FEATURES
Lingshan's series will add:
VDPA_ATTR_VDPA_DEV_SUPPORTED_FEATURES
and with this series, now we have one more:
VDPA_ATTR_DEV_FEATURES
Do we really need to maintain so many? I'm pretty sure at least one of
them can be eliminated.
-Siwei
>
> Thanks
>
>>>
>>> 1) provision vDPA device with all features that are supported by the
>>> net simulator
>>>
>>> # vdpa dev add name dev1 mgmtdev vdpasim_net
>>> # vdpa dev config show
>>> dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
>>> negotiated_features MTU MAC CTRL_VQ CTRL_MAC_ADDR VERSION_1 ACCESS_PLATFORM
>>>
>>> Maybe not in this patch, but for completeness for the whole series,
>>> could we also add device_features to the output?
>>>
>>> Lingshan, could you please share your thoughts or patch on this?
>>>
>>> Noted here the device_features argument specified during vdpa creation is introduced by this series itself, it somehow slightly changed the original semantics of what device_features used to be.
>> I'm not sure I get this, we don't support device_features in the past
>> and it is used to provision device features to the vDPA device which
>> seems to be fine.
>>
>>>
>>> When simply look at the "vdpa dev config show" output, I cannot really
>>> tell the actual device_features that was used in vdpa creation. For e.g.
>>> there is a missing feature ANY_LAYOUT from negotiated_features compared
>>> with supported_features in mgmtdev, but the orchestration software
>>> couldn't tell if the vdpa device on destination host should be created
>>> with or without the ANY_LAYOUT feature.
>>>
>>> I think VERSION_1 implies ANY_LAYOUT.
>>>
>>> Right, ANY_LAYOUT is a bad example. A good example might be that, I knew the parent mgmtdev on migration source node supports CTRL_MAC_ADDR, but I don't find it in negotiated_features.
>> I think we should use the features that we got from "mgmtdev show"
>> instead of "negotiated features".
>>
>>> On the migration destination node, the parent device does support all features as the source offers, including CTRL_MAC_ADDR. What device features you would expect the mgmt software to create destination vdpa device with, if not otherwise requiring mgmt software to remember all the arguments on device creation?
>> So in this example, we need use "dev_features" so we get exact the
>> same features after and operation as either src or dst.
>>
>>> SOURCE# vdpa mgmtdev show
>>> vdpasim_net:
>>> supported_classes net
>>> max_supported_vqs 3
>>> dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM
>>> SOURCE# vdpa dev config show
>>> dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
>>> negotiated_features MTU MAC CTRL_VQ VERSION_1 ACCESS_PLATFORM
>>>
>>> DESTINATION# vdpa mgmtdev show
>>> vdpasim_net:
>>> supported_classes net
>>> max_supported_vqs 3
>>> dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM
>>>
>>> But it should be sufficient to
>>> use features_src & feature_dst in this case. Actually, it should work
>>> similar as to the cpu flags, the management software should introduce
>>> the concept of cluster which means the maximal set of common features
>>> is calculated and provisioned during device creation to allow
>>> migration among the nodes inside the cluster.
>>>
>>> Yes, this is one way mgmt software may implement, but I am not sure if it's the only way. For e.g. for cpu flags, mgmt software can infer the guest cpus features in use from all qemu command line arguments and host cpu features/capability, which doesn't need to remember creation arguments and is easy to recover from failure without having to make the VM config persistent in data store. I thought it would be great if vdpa CLI design could offer the same.
>> One minor difference is that we have cpu model abstraction, so we can
>> have things like:
>>
>> ./qemu-system-x86_64 -cpu EPYC
>>
>> Which implies the cpu features/flags where vDPA doesn't have. But
>> consider it's just a 64bit (or 128 in the future), it doesn't seems to
>> be too complex for the management to know, we probably need to start
>> from this and then we can try to introduce some generation/model after
>> it is agreed on most of the vendors.
>>
>> Thanks
>>
>>> Thanks,
>>> -Siwei
>>>
>>>
>>> Thanks
>>>
>>> Thanks,
>>> -Siwei
>>>
>>>
>>> 2) provision vDPA device with a subset of the features
>>>
>>> # vdpa dev add name dev1 mgmtdev vdpasim_net device_features 0x300020000
>>> # vdpa dev config show
>>> dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
>>> negotiated_features CTRL_VQ VERSION_1 ACCESS_PLATFORM
>>>
>>> Reviewed-by: Eli Cohen<elic@nvidia.com>
>>> Signed-off-by: Jason Wang<jasowang@redhat.com>
>>> ---
>>> drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 11 ++++++++++-
>>> 1 file changed, 10 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
>>> index 886449e88502..a9ba02be378b 100644
>>> --- a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
>>> +++ b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
>>> @@ -254,6 +254,14 @@ static int vdpasim_net_dev_add(struct vdpa_mgmt_dev *mdev, const char *name,
>>> dev_attr.work_fn = vdpasim_net_work;
>>> dev_attr.buffer_size = PAGE_SIZE;
>>>
>>> + if (config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) {
>>> + if (config->device_features &
>>> + ~dev_attr.supported_features)
>>> + return -EINVAL;
>>> + dev_attr.supported_features &=
>>> + config->device_features;
>>> + }
>>> +
>>> simdev = vdpasim_create(&dev_attr);
>>> if (IS_ERR(simdev))
>>> return PTR_ERR(simdev);
>>> @@ -294,7 +302,8 @@ static struct vdpa_mgmt_dev mgmt_dev = {
>>> .id_table = id_table,
>>> .ops = &vdpasim_net_mgmtdev_ops,
>>> .config_attr_mask = (1 << VDPA_ATTR_DEV_NET_CFG_MACADDR |
>>> - 1 << VDPA_ATTR_DEV_NET_CFG_MTU),
>>> + 1 << VDPA_ATTR_DEV_NET_CFG_MTU |
>>> + 1 << VDPA_ATTR_DEV_FEATURES),
>>> .max_supported_vqs = VDPASIM_NET_VQ_NUM,
>>> .supported_features = VDPASIM_NET_FEATURES,
>>> };
>>>
>>>
[-- Attachment #1.2: Type: text/html, Size: 11851 bytes --]
[-- Attachment #2: Type: text/plain, Size: 183 bytes --]
_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
2022-09-27 10:00 ` Si-Wei Liu
@ 2022-09-29 4:10 ` Jason Wang
0 siblings, 0 replies; 55+ messages in thread
From: Jason Wang @ 2022-09-29 4:10 UTC (permalink / raw)
To: Si-Wei Liu
Cc: Parav Pandit, mst, Eli Cohen, Wu Zongyong, virtualization,
linux-kernel, eperezma, Zhu Lingshan, Gautam Dawar, Cindy Lu,
Yongji Xie
On Tue, Sep 27, 2022 at 6:01 PM Si-Wei Liu <si-wei.liu@oracle.com> wrote:
>
>
>
> On 9/26/2022 9:07 PM, Jason Wang wrote:
>
> On Tue, Sep 27, 2022 at 11:59 AM Jason Wang <jasowang@redhat.com> wrote:
>
> On Tue, Sep 27, 2022 at 9:02 AM Si-Wei Liu <si-wei.liu@oracle.com> wrote:
>
>
> On 9/26/2022 12:11 AM, Jason Wang wrote:
>
> On Sat, Sep 24, 2022 at 4:01 AM Si-Wei Liu <si-wei.liu@oracle.com> wrote:
>
>
> On 9/21/2022 7:43 PM, Jason Wang wrote:
>
> This patch implements features provisioning for vdpa_sim_net.
>
> 1) validating the provisioned features to be a subset of the parent
> features.
> 2) clearing the features that is not wanted by the userspace
>
> For example:
>
> # vdpa mgmtdev show
> vdpasim_net:
> supported_classes net
> max_supported_vqs 3
> dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM
>
> Sighs, not to blame any one and it's perhaps too late, but this
> "dev_features" attr in "mgmtdev show" command output should have been
> called "supported_features" in the first place.
>
> Not sure I get this, but I guess this is the negotiated features actually.
>
> Actually no, that is why I said the name is a bit confusing and "supported_features" might sound better.
>
> You're right, it's an mgmtdev show actually.
>
> This attribute in the parent device (mgmtdev) denotes the real device capability for what virtio features can be supported by the parent device. Any unprivileged user can check into this field to know parent device's capability without having to create a child vDPA device at all. The features that child vDPA device may support should be a subset of, or at most up to what the parent device offers. For e.g. the vdpa device dev1 you created below can expose less or equal device_features bit than 0x308820028 (MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM), but shouldn't be no more than what the parent device can actually support.
>
> Yes, I didn't see anything wrong with "dev_features", it aligns to the
> virtio spec which means the features could be used to create a vdpa
> device. But if everyone agree on the renaming, I'm fine.
>
>
> I think Ling Shan is working on reporting both negotiated features
> with the device features.
>
> Does it imply this series is connected to another work in parallel? Is it possible to add a reference in the cover letter?
>
> I'm not sure, I remember Ling Shan did some work to not block the
> config show in this commit:
>
> commit a34bed37fc9d3da319bb75dfbf02a7d3e95e12de
> Author: Zhu Lingshan <lingshan.zhu@intel.com>
> Date: Fri Jul 22 19:53:07 2022 +0800
>
> vDPA: !FEATURES_OK should not block querying device config space
>
> We need some changes in the vdpa tool to show device_features
> unconditionally in the "dev config show" command.
>
> Ok, Lingshan post an example here:
>
> https://lore.kernel.org/netdev/20220927025035.4972-2-lingshan.zhu@intel.com/T/#u
>
> As I explained in the other email, it's incorrect to count on config space fields to export vDPA attributes for live migration. If anyone thinks that is not true, think again.
>
> Additionally Parav already repeatedly pointed out quite a few times, we have a lot of (quasi-)duplicated attributes with similar names,
>
> VDPA_ATTR_DEV_SUPPORTED_FEATURES
>
> Lingshan's series will add:
>
> VDPA_ATTR_VDPA_DEV_SUPPORTED_FEATURES
>
> and with this series, now we have one more:
>
> VDPA_ATTR_DEV_FEATURES
>
> Do we really need to maintain so many? I'm pretty sure at least one of them can be eliminated.
I think VDPA_ATTR_VDPA_DEV_SUPPORTED_FEATURES and
VDPA_ATTR_DEV_FEATURES are equivalent, we can rebase on each other if
it is needed.
Thanks
>
> -Siwei
>
>
> Thanks
>
>
> 1) provision vDPA device with all features that are supported by the
> net simulator
>
> # vdpa dev add name dev1 mgmtdev vdpasim_net
> # vdpa dev config show
> dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> negotiated_features MTU MAC CTRL_VQ CTRL_MAC_ADDR VERSION_1 ACCESS_PLATFORM
>
> Maybe not in this patch, but for completeness for the whole series,
> could we also add device_features to the output?
>
> Lingshan, could you please share your thoughts or patch on this?
>
> Noted here the device_features argument specified during vdpa creation is introduced by this series itself, it somehow slightly changed the original semantics of what device_features used to be.
>
> I'm not sure I get this, we don't support device_features in the past
> and it is used to provision device features to the vDPA device which
> seems to be fine.
>
>
> When simply look at the "vdpa dev config show" output, I cannot really
> tell the actual device_features that was used in vdpa creation. For e.g.
> there is a missing feature ANY_LAYOUT from negotiated_features compared
> with supported_features in mgmtdev, but the orchestration software
> couldn't tell if the vdpa device on destination host should be created
> with or without the ANY_LAYOUT feature.
>
> I think VERSION_1 implies ANY_LAYOUT.
>
> Right, ANY_LAYOUT is a bad example. A good example might be that, I knew the parent mgmtdev on migration source node supports CTRL_MAC_ADDR, but I don't find it in negotiated_features.
>
> I think we should use the features that we got from "mgmtdev show"
> instead of "negotiated features".
>
> On the migration destination node, the parent device does support all features as the source offers, including CTRL_MAC_ADDR. What device features you would expect the mgmt software to create destination vdpa device with, if not otherwise requiring mgmt software to remember all the arguments on device creation?
>
> So in this example, we need use "dev_features" so we get exact the
> same features after and operation as either src or dst.
>
> SOURCE# vdpa mgmtdev show
> vdpasim_net:
> supported_classes net
> max_supported_vqs 3
> dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM
> SOURCE# vdpa dev config show
> dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> negotiated_features MTU MAC CTRL_VQ VERSION_1 ACCESS_PLATFORM
>
> DESTINATION# vdpa mgmtdev show
> vdpasim_net:
> supported_classes net
> max_supported_vqs 3
> dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM
>
> But it should be sufficient to
> use features_src & feature_dst in this case. Actually, it should work
> similar as to the cpu flags, the management software should introduce
> the concept of cluster which means the maximal set of common features
> is calculated and provisioned during device creation to allow
> migration among the nodes inside the cluster.
>
> Yes, this is one way mgmt software may implement, but I am not sure if it's the only way. For e.g. for cpu flags, mgmt software can infer the guest cpus features in use from all qemu command line arguments and host cpu features/capability, which doesn't need to remember creation arguments and is easy to recover from failure without having to make the VM config persistent in data store. I thought it would be great if vdpa CLI design could offer the same.
>
> One minor difference is that we have cpu model abstraction, so we can
> have things like:
>
> ./qemu-system-x86_64 -cpu EPYC
>
> Which implies the cpu features/flags where vDPA doesn't have. But
> consider it's just a 64bit (or 128 in the future), it doesn't seems to
> be too complex for the management to know, we probably need to start
> from this and then we can try to introduce some generation/model after
> it is agreed on most of the vendors.
>
> Thanks
>
> Thanks,
> -Siwei
>
>
> Thanks
>
> Thanks,
> -Siwei
>
>
> 2) provision vDPA device with a subset of the features
>
> # vdpa dev add name dev1 mgmtdev vdpasim_net device_features 0x300020000
> # vdpa dev config show
> dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> negotiated_features CTRL_VQ VERSION_1 ACCESS_PLATFORM
>
> Reviewed-by: Eli Cohen <elic@nvidia.com>
> Signed-off-by: Jason Wang <jasowang@redhat.com>
> ---
> drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 11 ++++++++++-
> 1 file changed, 10 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> index 886449e88502..a9ba02be378b 100644
> --- a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> +++ b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> @@ -254,6 +254,14 @@ static int vdpasim_net_dev_add(struct vdpa_mgmt_dev *mdev, const char *name,
> dev_attr.work_fn = vdpasim_net_work;
> dev_attr.buffer_size = PAGE_SIZE;
>
> + if (config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) {
> + if (config->device_features &
> + ~dev_attr.supported_features)
> + return -EINVAL;
> + dev_attr.supported_features &=
> + config->device_features;
> + }
> +
> simdev = vdpasim_create(&dev_attr);
> if (IS_ERR(simdev))
> return PTR_ERR(simdev);
> @@ -294,7 +302,8 @@ static struct vdpa_mgmt_dev mgmt_dev = {
> .id_table = id_table,
> .ops = &vdpasim_net_mgmtdev_ops,
> .config_attr_mask = (1 << VDPA_ATTR_DEV_NET_CFG_MACADDR |
> - 1 << VDPA_ATTR_DEV_NET_CFG_MTU),
> + 1 << VDPA_ATTR_DEV_NET_CFG_MTU |
> + 1 << VDPA_ATTR_DEV_FEATURES),
> .max_supported_vqs = VDPASIM_NET_VQ_NUM,
> .supported_features = VDPASIM_NET_FEATURES,
> };
>
>
>
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
@ 2022-09-29 4:10 ` Jason Wang
0 siblings, 0 replies; 55+ messages in thread
From: Jason Wang @ 2022-09-29 4:10 UTC (permalink / raw)
To: Si-Wei Liu
Cc: Cindy Lu, mst, Yongji Xie, linux-kernel, Gautam Dawar,
virtualization, eperezma, Wu Zongyong, Eli Cohen, Zhu Lingshan
On Tue, Sep 27, 2022 at 6:01 PM Si-Wei Liu <si-wei.liu@oracle.com> wrote:
>
>
>
> On 9/26/2022 9:07 PM, Jason Wang wrote:
>
> On Tue, Sep 27, 2022 at 11:59 AM Jason Wang <jasowang@redhat.com> wrote:
>
> On Tue, Sep 27, 2022 at 9:02 AM Si-Wei Liu <si-wei.liu@oracle.com> wrote:
>
>
> On 9/26/2022 12:11 AM, Jason Wang wrote:
>
> On Sat, Sep 24, 2022 at 4:01 AM Si-Wei Liu <si-wei.liu@oracle.com> wrote:
>
>
> On 9/21/2022 7:43 PM, Jason Wang wrote:
>
> This patch implements features provisioning for vdpa_sim_net.
>
> 1) validating the provisioned features to be a subset of the parent
> features.
> 2) clearing the features that is not wanted by the userspace
>
> For example:
>
> # vdpa mgmtdev show
> vdpasim_net:
> supported_classes net
> max_supported_vqs 3
> dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM
>
> Sighs, not to blame any one and it's perhaps too late, but this
> "dev_features" attr in "mgmtdev show" command output should have been
> called "supported_features" in the first place.
>
> Not sure I get this, but I guess this is the negotiated features actually.
>
> Actually no, that is why I said the name is a bit confusing and "supported_features" might sound better.
>
> You're right, it's an mgmtdev show actually.
>
> This attribute in the parent device (mgmtdev) denotes the real device capability for what virtio features can be supported by the parent device. Any unprivileged user can check into this field to know parent device's capability without having to create a child vDPA device at all. The features that child vDPA device may support should be a subset of, or at most up to what the parent device offers. For e.g. the vdpa device dev1 you created below can expose less or equal device_features bit than 0x308820028 (MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM), but shouldn't be no more than what the parent device can actually support.
>
> Yes, I didn't see anything wrong with "dev_features", it aligns to the
> virtio spec which means the features could be used to create a vdpa
> device. But if everyone agree on the renaming, I'm fine.
>
>
> I think Ling Shan is working on reporting both negotiated features
> with the device features.
>
> Does it imply this series is connected to another work in parallel? Is it possible to add a reference in the cover letter?
>
> I'm not sure, I remember Ling Shan did some work to not block the
> config show in this commit:
>
> commit a34bed37fc9d3da319bb75dfbf02a7d3e95e12de
> Author: Zhu Lingshan <lingshan.zhu@intel.com>
> Date: Fri Jul 22 19:53:07 2022 +0800
>
> vDPA: !FEATURES_OK should not block querying device config space
>
> We need some changes in the vdpa tool to show device_features
> unconditionally in the "dev config show" command.
>
> Ok, Lingshan post an example here:
>
> https://lore.kernel.org/netdev/20220927025035.4972-2-lingshan.zhu@intel.com/T/#u
>
> As I explained in the other email, it's incorrect to count on config space fields to export vDPA attributes for live migration. If anyone thinks that is not true, think again.
>
> Additionally Parav already repeatedly pointed out quite a few times, we have a lot of (quasi-)duplicated attributes with similar names,
>
> VDPA_ATTR_DEV_SUPPORTED_FEATURES
>
> Lingshan's series will add:
>
> VDPA_ATTR_VDPA_DEV_SUPPORTED_FEATURES
>
> and with this series, now we have one more:
>
> VDPA_ATTR_DEV_FEATURES
>
> Do we really need to maintain so many? I'm pretty sure at least one of them can be eliminated.
I think VDPA_ATTR_VDPA_DEV_SUPPORTED_FEATURES and
VDPA_ATTR_DEV_FEATURES are equivalent, we can rebase on each other if
it is needed.
Thanks
>
> -Siwei
>
>
> Thanks
>
>
> 1) provision vDPA device with all features that are supported by the
> net simulator
>
> # vdpa dev add name dev1 mgmtdev vdpasim_net
> # vdpa dev config show
> dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> negotiated_features MTU MAC CTRL_VQ CTRL_MAC_ADDR VERSION_1 ACCESS_PLATFORM
>
> Maybe not in this patch, but for completeness for the whole series,
> could we also add device_features to the output?
>
> Lingshan, could you please share your thoughts or patch on this?
>
> Noted here the device_features argument specified during vdpa creation is introduced by this series itself, it somehow slightly changed the original semantics of what device_features used to be.
>
> I'm not sure I get this, we don't support device_features in the past
> and it is used to provision device features to the vDPA device which
> seems to be fine.
>
>
> When simply look at the "vdpa dev config show" output, I cannot really
> tell the actual device_features that was used in vdpa creation. For e.g.
> there is a missing feature ANY_LAYOUT from negotiated_features compared
> with supported_features in mgmtdev, but the orchestration software
> couldn't tell if the vdpa device on destination host should be created
> with or without the ANY_LAYOUT feature.
>
> I think VERSION_1 implies ANY_LAYOUT.
>
> Right, ANY_LAYOUT is a bad example. A good example might be that, I knew the parent mgmtdev on migration source node supports CTRL_MAC_ADDR, but I don't find it in negotiated_features.
>
> I think we should use the features that we got from "mgmtdev show"
> instead of "negotiated features".
>
> On the migration destination node, the parent device does support all features as the source offers, including CTRL_MAC_ADDR. What device features you would expect the mgmt software to create destination vdpa device with, if not otherwise requiring mgmt software to remember all the arguments on device creation?
>
> So in this example, we need use "dev_features" so we get exact the
> same features after and operation as either src or dst.
>
> SOURCE# vdpa mgmtdev show
> vdpasim_net:
> supported_classes net
> max_supported_vqs 3
> dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM
> SOURCE# vdpa dev config show
> dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> negotiated_features MTU MAC CTRL_VQ VERSION_1 ACCESS_PLATFORM
>
> DESTINATION# vdpa mgmtdev show
> vdpasim_net:
> supported_classes net
> max_supported_vqs 3
> dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM
>
> But it should be sufficient to
> use features_src & feature_dst in this case. Actually, it should work
> similar as to the cpu flags, the management software should introduce
> the concept of cluster which means the maximal set of common features
> is calculated and provisioned during device creation to allow
> migration among the nodes inside the cluster.
>
> Yes, this is one way mgmt software may implement, but I am not sure if it's the only way. For e.g. for cpu flags, mgmt software can infer the guest cpus features in use from all qemu command line arguments and host cpu features/capability, which doesn't need to remember creation arguments and is easy to recover from failure without having to make the VM config persistent in data store. I thought it would be great if vdpa CLI design could offer the same.
>
> One minor difference is that we have cpu model abstraction, so we can
> have things like:
>
> ./qemu-system-x86_64 -cpu EPYC
>
> Which implies the cpu features/flags where vDPA doesn't have. But
> consider it's just a 64bit (or 128 in the future), it doesn't seems to
> be too complex for the management to know, we probably need to start
> from this and then we can try to introduce some generation/model after
> it is agreed on most of the vendors.
>
> Thanks
>
> Thanks,
> -Siwei
>
>
> Thanks
>
> Thanks,
> -Siwei
>
>
> 2) provision vDPA device with a subset of the features
>
> # vdpa dev add name dev1 mgmtdev vdpasim_net device_features 0x300020000
> # vdpa dev config show
> dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> negotiated_features CTRL_VQ VERSION_1 ACCESS_PLATFORM
>
> Reviewed-by: Eli Cohen <elic@nvidia.com>
> Signed-off-by: Jason Wang <jasowang@redhat.com>
> ---
> drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 11 ++++++++++-
> 1 file changed, 10 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> index 886449e88502..a9ba02be378b 100644
> --- a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> +++ b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> @@ -254,6 +254,14 @@ static int vdpasim_net_dev_add(struct vdpa_mgmt_dev *mdev, const char *name,
> dev_attr.work_fn = vdpasim_net_work;
> dev_attr.buffer_size = PAGE_SIZE;
>
> + if (config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) {
> + if (config->device_features &
> + ~dev_attr.supported_features)
> + return -EINVAL;
> + dev_attr.supported_features &=
> + config->device_features;
> + }
> +
> simdev = vdpasim_create(&dev_attr);
> if (IS_ERR(simdev))
> return PTR_ERR(simdev);
> @@ -294,7 +302,8 @@ static struct vdpa_mgmt_dev mgmt_dev = {
> .id_table = id_table,
> .ops = &vdpasim_net_mgmtdev_ops,
> .config_attr_mask = (1 << VDPA_ATTR_DEV_NET_CFG_MACADDR |
> - 1 << VDPA_ATTR_DEV_NET_CFG_MTU),
> + 1 << VDPA_ATTR_DEV_NET_CFG_MTU |
> + 1 << VDPA_ATTR_DEV_FEATURES),
> .max_supported_vqs = VDPASIM_NET_VQ_NUM,
> .supported_features = VDPASIM_NET_FEATURES,
> };
>
>
>
_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
2022-09-27 9:41 ` Si-Wei Liu
@ 2022-09-29 4:55 ` Jason Wang
0 siblings, 0 replies; 55+ messages in thread
From: Jason Wang @ 2022-09-29 4:55 UTC (permalink / raw)
To: Si-Wei Liu
Cc: mst, Eli Cohen, Parav Pandit, Wu Zongyong, virtualization,
linux-kernel, eperezma, Zhu Lingshan, Gautam Dawar, Cindy Lu,
Yongji Xie
On Tue, Sep 27, 2022 at 5:41 PM Si-Wei Liu <si-wei.liu@oracle.com> wrote:
>
>
>
> On 9/26/2022 8:59 PM, Jason Wang wrote:
>
> On Tue, Sep 27, 2022 at 9:02 AM Si-Wei Liu <si-wei.liu@oracle.com> wrote:
>
>
> On 9/26/2022 12:11 AM, Jason Wang wrote:
>
> On Sat, Sep 24, 2022 at 4:01 AM Si-Wei Liu <si-wei.liu@oracle.com> wrote:
>
>
> On 9/21/2022 7:43 PM, Jason Wang wrote:
>
> This patch implements features provisioning for vdpa_sim_net.
>
> 1) validating the provisioned features to be a subset of the parent
> features.
> 2) clearing the features that is not wanted by the userspace
>
> For example:
>
> # vdpa mgmtdev show
> vdpasim_net:
> supported_classes net
> max_supported_vqs 3
> dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM
>
> Sighs, not to blame any one and it's perhaps too late, but this
> "dev_features" attr in "mgmtdev show" command output should have been
> called "supported_features" in the first place.
>
> Not sure I get this, but I guess this is the negotiated features actually.
>
> Actually no, that is why I said the name is a bit confusing and "supported_features" might sound better.
>
> You're right, it's an mgmtdev show actually.
>
> This attribute in the parent device (mgmtdev) denotes the real device capability for what virtio features can be supported by the parent device. Any unprivileged user can check into this field to know parent device's capability without having to create a child vDPA device at all. The features that child vDPA device may support should be a subset of, or at most up to what the parent device offers. For e.g. the vdpa device dev1 you created below can expose less or equal device_features bit than 0x308820028 (MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM), but shouldn't be no more than what the parent device can actually support.
>
> Yes, I didn't see anything wrong with "dev_features",
>
> Yep, it didn't appear to me anything wrong either at first sight, then I gave my R-b on the series introduced this attribute. But it's not a perfect name, either, on the other hand. Parav later pointed out that the corresponding enum definition for this attribute should follow pre-existing naming convention that we should perhaps do s/VDPA_ATTR_DEV_SUPPORTED_FEATURES/VDPA_ATTR_MGMTDEV_SUPPORTED_FEATURES/ to get it renamed, as this is a mgmtdev level attribute, which I agree. Now that with the upcoming "device_features" attribute (vdpa dev level) from this series, it's subject to another confusions between these two similar names, but actually would represent things at different level. While all other attributes in "mgmtdev dev show" seem to be aligned with the "supported_" prefix, e.g. supported_classes, max_supported_vqs, from which I think the stance of device is already implied through "mgmtdev" in the command. For the perspective of clarify and easy distinction, "supported_features" seems to be a better name than "dev_features".
See another reply, I think I get your point,
1) VDPA_ATTR_VDPA_DEV_SUPPORTED_FEATURES (lingshan's series) and
VDPA_ATTR_VDPA_DEV_FEATURES should be equivalent and unified to a
single attribute.
2) A better name to "supported_features" should be fine, patches are welcomed
>
> it aligns to the
> virtio spec which means the features could be used to create a vdpa
> device. But if everyone agree on the renaming, I'm fine.
>
> Never mind, if it's late don't have to bother.
>
>
>
> I think Ling Shan is working on reporting both negotiated features
> with the device features.
>
> Does it imply this series is connected to another work in parallel? Is it possible to add a reference in the cover letter?
>
> I'm not sure, I remember Ling Shan did some work to not block the
> config show in this commit:
>
> commit a34bed37fc9d3da319bb75dfbf02a7d3e95e12de
> Author: Zhu Lingshan <lingshan.zhu@intel.com>
> Date: Fri Jul 22 19:53:07 2022 +0800
>
> vDPA: !FEATURES_OK should not block querying device config space
>
> We need some changes in the vdpa tool to show device_features
> unconditionally in the "dev config show" command.
>
> That's true, I think I ever pointed it out to Lingshan before, that it's not needed to bother exposing those config space fields in "dev config show" output, if the only intent is for live migration of device features between nodes. For vDPA live migration, what cares most is those configuration parameters specified on vdpa creation, and userspace VMM (QEMU) is supposed to take care of saving and restoring live device states. I think it's easier to extend "vdpa dev show" output to include device_features and other config params as well, rather than count on validity of various config space fields.
Probably, but for the migration it's more about the ability of the
mgmtdev instead of the vDPA device itself I think.
>
> https://lore.kernel.org/virtualization/454bdf1b-daa1-aa67-2b8c-bc15351c1851@oracle.com/
>
> It's not just insufficient, but sometimes is incorrect to create vDPA device using the config space fields. For instance, MAC address in config space can be changed temporarily (until device reset) via ctrl_vq VIRTIO_NET_CTRL_MAC_ADDR_SET command. It's incorrect to create vDPA using the MAC address shown in the config space.
I think it's still a must for create the mac with the exact mac address:
1) VIRTIO_NET_F_CTRL_MAC is not a must
2) there's no way for us to know whether or not the mac has been changed
3) migration code can restore the mac during restore
So exactly the same mac address is still required. (This is the same
as we are doing for live migration on software virtio)
> Another example, if the source vDPA device has MAC address table size limit of 100, then in the destination we should pick parent device with size limit no smaller than that, and create vDPA on remote node matching the exact same size. There's nothing config space field can assist here.
Two ways:
1) mgmtdev should show the mac table size so mgmt layer can provision
the mac table size
2) If the mac table exceeds what is supported in the destination, it
needs to enable the all uni in this case.
>
> One example further, in the future, if we are going to introduce mandatory feature (for e.g. VERSION_1, RING_PACKED) that the device is unable to support the opposite case, the destination device should be created with equally same mandatory device features, which only vDPA creation parameters should matter. While I can't think of a case that the mgmt software or live migration tool would have to count on config space fields only.
Yes, in this case we need to introduce new netlink attributes for both
getting mandatory features from the management device and provisioning
those manadating features.
>
>
>
>
> 1) provision vDPA device with all features that are supported by the
> net simulator
>
> # vdpa dev add name dev1 mgmtdev vdpasim_net
> # vdpa dev config show
> dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> negotiated_features MTU MAC CTRL_VQ CTRL_MAC_ADDR VERSION_1 ACCESS_PLATFORM
>
> Maybe not in this patch, but for completeness for the whole series,
> could we also add device_features to the output?
>
> Lingshan, could you please share your thoughts or patch on this?
>
> Noted here the device_features argument specified during vdpa creation is introduced by this series itself, it somehow slightly changed the original semantics of what device_features used to be.
>
> I'm not sure I get this, we don't support device_features in the past
> and it is used to provision device features to the vDPA device which
> seems to be fine.
>
> Before this change, only look at the dev_features in "mgmtdev show" and remember creation parameters is sufficient to get to all needed info for creating vDPA at destination.
Note that even with the same vendor, mgmtdev may support different features.
> After this change, dev_features in "mgmtdev show" becomes less relevant, as it would need to remember vdpa creation parameters plus the device_features attribute. While this series allows cross vendor live migration, it would complicate the implementation of mgmt software, on the other hand.
To allow cross vendor live migration I couldn't find a better way.
>
>
>
> When simply look at the "vdpa dev config show" output, I cannot really
> tell the actual device_features that was used in vdpa creation. For e.g.
> there is a missing feature ANY_LAYOUT from negotiated_features compared
> with supported_features in mgmtdev, but the orchestration software
> couldn't tell if the vdpa device on destination host should be created
> with or without the ANY_LAYOUT feature.
>
> I think VERSION_1 implies ANY_LAYOUT.
>
> Right, ANY_LAYOUT is a bad example. A good example might be that, I knew the parent mgmtdev on migration source node supports CTRL_MAC_ADDR, but I don't find it in negotiated_features.
>
> I think we should use the features that we got from "mgmtdev show"
> instead of "negotiated features".
>
> That was how it's supposed to work previously, but with this series, I think the newly introduced device_features will be needed instead of the one in "mgmtdev show".
Just to clarify, there won't be a device_features in mgmtdev show
since it is device specific, each individual device can have its own
device features which are subset of what is supported by the mgmtdev.
>
>
> On the migration destination node, the parent device does support all features as the source offers, including CTRL_MAC_ADDR. What device features you would expect the mgmt software to create destination vdpa device with, if not otherwise requiring mgmt software to remember all the arguments on device creation?
So the provisioning in the destination should use exactly the same
device_feautres as what the vdpa device has in the source. But before
this, management layer should guarantee to provision a vDPA device
whose device_features can be supported on the destination in order to
allow live migration.
>
> So in this example, we need use "dev_features" so we get exact the
> same features after and operation as either src or dst.
>
> If the device_features vDPA created with at the source doesn't include CTRL_MAC_ADDR even though parent supports it, then the vDPA to be created at the destination shouldn't come with CTRL_MAC_ADDR either, regardless of whether or not CTRL_MAC_ADDR is present in destination "mgmtdev show".
>
> However, if just taking look at negotiated_features, some mgmt software implementations which don't persist the creation parameters can't get the device features a certain vDPA device at the source node was created with.
>
>
> SOURCE# vdpa mgmtdev show
> vdpasim_net:
> supported_classes net
> max_supported_vqs 3
> dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM
> SOURCE# vdpa dev config show
> dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> negotiated_features MTU MAC CTRL_VQ VERSION_1 ACCESS_PLATFORM
>
> DESTINATION# vdpa mgmtdev show
> vdpasim_net:
> supported_classes net
> max_supported_vqs 3
> dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM
>
> But it should be sufficient to
> use features_src & feature_dst in this case. Actually, it should work
> similar as to the cpu flags, the management software should introduce
> the concept of cluster which means the maximal set of common features
> is calculated and provisioned during device creation to allow
> migration among the nodes inside the cluster.
>
> Yes, this is one way mgmt software may implement, but I am not sure if it's the only way. For e.g. for cpu flags, mgmt software can infer the guest cpus features in use from all qemu command line arguments and host cpu features/capability, which doesn't need to remember creation arguments and is easy to recover from failure without having to make the VM config persistent in data store. I thought it would be great if vdpa CLI design could offer the same.
>
> One minor difference is that we have cpu model abstraction, so we can
> have things like:
>
> ./qemu-system-x86_64 -cpu EPYC
>
> Which implies the cpu features/flags where vDPA doesn't have. But
> consider it's just a 64bit (or 128 in the future), it doesn't seems to
> be too complex for the management to know, we probably need to start
> from this and then we can try to introduce some generation/model after
> it is agreed on most of the vendors.
>
> What you refer to is the so-called named model for CPU flags. I think it's a good addition to have some generation or named model defined for vDPA. But I don't get the point for how it relates to exposing the actual value of device features? Are you saying in this case you'd rather expose the model name than the actual value of feature bits? Well, I think we can expose both in different fields when there's really such a need.
It's something like:
vdpa dev add name dev1 mgmtdev vdpasim_net device_features VDPA_NET_MODEL_1
and VDPA_NET_MODEL_1 implies some feature sets.
>
> BTW with regard to the cpu model in mgmt software implementation, the one implemented in libvirt is a mixed "Host model" [1] with taking advantage of QEMU named model and exposing additional individual CPU features that gets close to what host CPU offers.
So creating vDPA device without "device_features" is somehow the host
model, it will have all features that is supported by the parent.
> I think this implies that mgmt software should have to understand what the model name really means in terms of individual CPU features, so having feature bit value exposed will just do more help if vDPA goes the same way.
Exactly.
Thanks
>
>
> Regards,
> -Siwei
>
> [1] https://qemu-project.gitlab.io/qemu/system/qemu-cpu-models.html#two-ways-to-configure-cpu-models-with-qemu-kvm
>
>
> Thanks
>
> Thanks,
> -Siwei
>
>
> Thanks
>
> Thanks,
> -Siwei
>
>
> 2) provision vDPA device with a subset of the features
>
> # vdpa dev add name dev1 mgmtdev vdpasim_net device_features 0x300020000
> # vdpa dev config show
> dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> negotiated_features CTRL_VQ VERSION_1 ACCESS_PLATFORM
>
> Reviewed-by: Eli Cohen <elic@nvidia.com>
> Signed-off-by: Jason Wang <jasowang@redhat.com>
> ---
> drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 11 ++++++++++-
> 1 file changed, 10 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> index 886449e88502..a9ba02be378b 100644
> --- a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> +++ b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> @@ -254,6 +254,14 @@ static int vdpasim_net_dev_add(struct vdpa_mgmt_dev *mdev, const char *name,
> dev_attr.work_fn = vdpasim_net_work;
> dev_attr.buffer_size = PAGE_SIZE;
>
> + if (config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) {
> + if (config->device_features &
> + ~dev_attr.supported_features)
> + return -EINVAL;
> + dev_attr.supported_features &=
> + config->device_features;
> + }
> +
> simdev = vdpasim_create(&dev_attr);
> if (IS_ERR(simdev))
> return PTR_ERR(simdev);
> @@ -294,7 +302,8 @@ static struct vdpa_mgmt_dev mgmt_dev = {
> .id_table = id_table,
> .ops = &vdpasim_net_mgmtdev_ops,
> .config_attr_mask = (1 << VDPA_ATTR_DEV_NET_CFG_MACADDR |
> - 1 << VDPA_ATTR_DEV_NET_CFG_MTU),
> + 1 << VDPA_ATTR_DEV_NET_CFG_MTU |
> + 1 << VDPA_ATTR_DEV_FEATURES),
> .max_supported_vqs = VDPASIM_NET_VQ_NUM,
> .supported_features = VDPASIM_NET_FEATURES,
> };
>
>
>
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
@ 2022-09-29 4:55 ` Jason Wang
0 siblings, 0 replies; 55+ messages in thread
From: Jason Wang @ 2022-09-29 4:55 UTC (permalink / raw)
To: Si-Wei Liu
Cc: Cindy Lu, mst, Yongji Xie, linux-kernel, Gautam Dawar,
virtualization, eperezma, Wu Zongyong, Eli Cohen, Zhu Lingshan
On Tue, Sep 27, 2022 at 5:41 PM Si-Wei Liu <si-wei.liu@oracle.com> wrote:
>
>
>
> On 9/26/2022 8:59 PM, Jason Wang wrote:
>
> On Tue, Sep 27, 2022 at 9:02 AM Si-Wei Liu <si-wei.liu@oracle.com> wrote:
>
>
> On 9/26/2022 12:11 AM, Jason Wang wrote:
>
> On Sat, Sep 24, 2022 at 4:01 AM Si-Wei Liu <si-wei.liu@oracle.com> wrote:
>
>
> On 9/21/2022 7:43 PM, Jason Wang wrote:
>
> This patch implements features provisioning for vdpa_sim_net.
>
> 1) validating the provisioned features to be a subset of the parent
> features.
> 2) clearing the features that is not wanted by the userspace
>
> For example:
>
> # vdpa mgmtdev show
> vdpasim_net:
> supported_classes net
> max_supported_vqs 3
> dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM
>
> Sighs, not to blame any one and it's perhaps too late, but this
> "dev_features" attr in "mgmtdev show" command output should have been
> called "supported_features" in the first place.
>
> Not sure I get this, but I guess this is the negotiated features actually.
>
> Actually no, that is why I said the name is a bit confusing and "supported_features" might sound better.
>
> You're right, it's an mgmtdev show actually.
>
> This attribute in the parent device (mgmtdev) denotes the real device capability for what virtio features can be supported by the parent device. Any unprivileged user can check into this field to know parent device's capability without having to create a child vDPA device at all. The features that child vDPA device may support should be a subset of, or at most up to what the parent device offers. For e.g. the vdpa device dev1 you created below can expose less or equal device_features bit than 0x308820028 (MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM), but shouldn't be no more than what the parent device can actually support.
>
> Yes, I didn't see anything wrong with "dev_features",
>
> Yep, it didn't appear to me anything wrong either at first sight, then I gave my R-b on the series introduced this attribute. But it's not a perfect name, either, on the other hand. Parav later pointed out that the corresponding enum definition for this attribute should follow pre-existing naming convention that we should perhaps do s/VDPA_ATTR_DEV_SUPPORTED_FEATURES/VDPA_ATTR_MGMTDEV_SUPPORTED_FEATURES/ to get it renamed, as this is a mgmtdev level attribute, which I agree. Now that with the upcoming "device_features" attribute (vdpa dev level) from this series, it's subject to another confusions between these two similar names, but actually would represent things at different level. While all other attributes in "mgmtdev dev show" seem to be aligned with the "supported_" prefix, e.g. supported_classes, max_supported_vqs, from which I think the stance of device is already implied through "mgmtdev" in the command. For the perspective of clarify and easy distinction, "supported_feat
ures" seems to be a better name than "dev_features".
See another reply, I think I get your point,
1) VDPA_ATTR_VDPA_DEV_SUPPORTED_FEATURES (lingshan's series) and
VDPA_ATTR_VDPA_DEV_FEATURES should be equivalent and unified to a
single attribute.
2) A better name to "supported_features" should be fine, patches are welcomed
>
> it aligns to the
> virtio spec which means the features could be used to create a vdpa
> device. But if everyone agree on the renaming, I'm fine.
>
> Never mind, if it's late don't have to bother.
>
>
>
> I think Ling Shan is working on reporting both negotiated features
> with the device features.
>
> Does it imply this series is connected to another work in parallel? Is it possible to add a reference in the cover letter?
>
> I'm not sure, I remember Ling Shan did some work to not block the
> config show in this commit:
>
> commit a34bed37fc9d3da319bb75dfbf02a7d3e95e12de
> Author: Zhu Lingshan <lingshan.zhu@intel.com>
> Date: Fri Jul 22 19:53:07 2022 +0800
>
> vDPA: !FEATURES_OK should not block querying device config space
>
> We need some changes in the vdpa tool to show device_features
> unconditionally in the "dev config show" command.
>
> That's true, I think I ever pointed it out to Lingshan before, that it's not needed to bother exposing those config space fields in "dev config show" output, if the only intent is for live migration of device features between nodes. For vDPA live migration, what cares most is those configuration parameters specified on vdpa creation, and userspace VMM (QEMU) is supposed to take care of saving and restoring live device states. I think it's easier to extend "vdpa dev show" output to include device_features and other config params as well, rather than count on validity of various config space fields.
Probably, but for the migration it's more about the ability of the
mgmtdev instead of the vDPA device itself I think.
>
> https://lore.kernel.org/virtualization/454bdf1b-daa1-aa67-2b8c-bc15351c1851@oracle.com/
>
> It's not just insufficient, but sometimes is incorrect to create vDPA device using the config space fields. For instance, MAC address in config space can be changed temporarily (until device reset) via ctrl_vq VIRTIO_NET_CTRL_MAC_ADDR_SET command. It's incorrect to create vDPA using the MAC address shown in the config space.
I think it's still a must for create the mac with the exact mac address:
1) VIRTIO_NET_F_CTRL_MAC is not a must
2) there's no way for us to know whether or not the mac has been changed
3) migration code can restore the mac during restore
So exactly the same mac address is still required. (This is the same
as we are doing for live migration on software virtio)
> Another example, if the source vDPA device has MAC address table size limit of 100, then in the destination we should pick parent device with size limit no smaller than that, and create vDPA on remote node matching the exact same size. There's nothing config space field can assist here.
Two ways:
1) mgmtdev should show the mac table size so mgmt layer can provision
the mac table size
2) If the mac table exceeds what is supported in the destination, it
needs to enable the all uni in this case.
>
> One example further, in the future, if we are going to introduce mandatory feature (for e.g. VERSION_1, RING_PACKED) that the device is unable to support the opposite case, the destination device should be created with equally same mandatory device features, which only vDPA creation parameters should matter. While I can't think of a case that the mgmt software or live migration tool would have to count on config space fields only.
Yes, in this case we need to introduce new netlink attributes for both
getting mandatory features from the management device and provisioning
those manadating features.
>
>
>
>
> 1) provision vDPA device with all features that are supported by the
> net simulator
>
> # vdpa dev add name dev1 mgmtdev vdpasim_net
> # vdpa dev config show
> dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> negotiated_features MTU MAC CTRL_VQ CTRL_MAC_ADDR VERSION_1 ACCESS_PLATFORM
>
> Maybe not in this patch, but for completeness for the whole series,
> could we also add device_features to the output?
>
> Lingshan, could you please share your thoughts or patch on this?
>
> Noted here the device_features argument specified during vdpa creation is introduced by this series itself, it somehow slightly changed the original semantics of what device_features used to be.
>
> I'm not sure I get this, we don't support device_features in the past
> and it is used to provision device features to the vDPA device which
> seems to be fine.
>
> Before this change, only look at the dev_features in "mgmtdev show" and remember creation parameters is sufficient to get to all needed info for creating vDPA at destination.
Note that even with the same vendor, mgmtdev may support different features.
> After this change, dev_features in "mgmtdev show" becomes less relevant, as it would need to remember vdpa creation parameters plus the device_features attribute. While this series allows cross vendor live migration, it would complicate the implementation of mgmt software, on the other hand.
To allow cross vendor live migration I couldn't find a better way.
>
>
>
> When simply look at the "vdpa dev config show" output, I cannot really
> tell the actual device_features that was used in vdpa creation. For e.g.
> there is a missing feature ANY_LAYOUT from negotiated_features compared
> with supported_features in mgmtdev, but the orchestration software
> couldn't tell if the vdpa device on destination host should be created
> with or without the ANY_LAYOUT feature.
>
> I think VERSION_1 implies ANY_LAYOUT.
>
> Right, ANY_LAYOUT is a bad example. A good example might be that, I knew the parent mgmtdev on migration source node supports CTRL_MAC_ADDR, but I don't find it in negotiated_features.
>
> I think we should use the features that we got from "mgmtdev show"
> instead of "negotiated features".
>
> That was how it's supposed to work previously, but with this series, I think the newly introduced device_features will be needed instead of the one in "mgmtdev show".
Just to clarify, there won't be a device_features in mgmtdev show
since it is device specific, each individual device can have its own
device features which are subset of what is supported by the mgmtdev.
>
>
> On the migration destination node, the parent device does support all features as the source offers, including CTRL_MAC_ADDR. What device features you would expect the mgmt software to create destination vdpa device with, if not otherwise requiring mgmt software to remember all the arguments on device creation?
So the provisioning in the destination should use exactly the same
device_feautres as what the vdpa device has in the source. But before
this, management layer should guarantee to provision a vDPA device
whose device_features can be supported on the destination in order to
allow live migration.
>
> So in this example, we need use "dev_features" so we get exact the
> same features after and operation as either src or dst.
>
> If the device_features vDPA created with at the source doesn't include CTRL_MAC_ADDR even though parent supports it, then the vDPA to be created at the destination shouldn't come with CTRL_MAC_ADDR either, regardless of whether or not CTRL_MAC_ADDR is present in destination "mgmtdev show".
>
> However, if just taking look at negotiated_features, some mgmt software implementations which don't persist the creation parameters can't get the device features a certain vDPA device at the source node was created with.
>
>
> SOURCE# vdpa mgmtdev show
> vdpasim_net:
> supported_classes net
> max_supported_vqs 3
> dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM
> SOURCE# vdpa dev config show
> dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> negotiated_features MTU MAC CTRL_VQ VERSION_1 ACCESS_PLATFORM
>
> DESTINATION# vdpa mgmtdev show
> vdpasim_net:
> supported_classes net
> max_supported_vqs 3
> dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM
>
> But it should be sufficient to
> use features_src & feature_dst in this case. Actually, it should work
> similar as to the cpu flags, the management software should introduce
> the concept of cluster which means the maximal set of common features
> is calculated and provisioned during device creation to allow
> migration among the nodes inside the cluster.
>
> Yes, this is one way mgmt software may implement, but I am not sure if it's the only way. For e.g. for cpu flags, mgmt software can infer the guest cpus features in use from all qemu command line arguments and host cpu features/capability, which doesn't need to remember creation arguments and is easy to recover from failure without having to make the VM config persistent in data store. I thought it would be great if vdpa CLI design could offer the same.
>
> One minor difference is that we have cpu model abstraction, so we can
> have things like:
>
> ./qemu-system-x86_64 -cpu EPYC
>
> Which implies the cpu features/flags where vDPA doesn't have. But
> consider it's just a 64bit (or 128 in the future), it doesn't seems to
> be too complex for the management to know, we probably need to start
> from this and then we can try to introduce some generation/model after
> it is agreed on most of the vendors.
>
> What you refer to is the so-called named model for CPU flags. I think it's a good addition to have some generation or named model defined for vDPA. But I don't get the point for how it relates to exposing the actual value of device features? Are you saying in this case you'd rather expose the model name than the actual value of feature bits? Well, I think we can expose both in different fields when there's really such a need.
It's something like:
vdpa dev add name dev1 mgmtdev vdpasim_net device_features VDPA_NET_MODEL_1
and VDPA_NET_MODEL_1 implies some feature sets.
>
> BTW with regard to the cpu model in mgmt software implementation, the one implemented in libvirt is a mixed "Host model" [1] with taking advantage of QEMU named model and exposing additional individual CPU features that gets close to what host CPU offers.
So creating vDPA device without "device_features" is somehow the host
model, it will have all features that is supported by the parent.
> I think this implies that mgmt software should have to understand what the model name really means in terms of individual CPU features, so having feature bit value exposed will just do more help if vDPA goes the same way.
Exactly.
Thanks
>
>
> Regards,
> -Siwei
>
> [1] https://qemu-project.gitlab.io/qemu/system/qemu-cpu-models.html#two-ways-to-configure-cpu-models-with-qemu-kvm
>
>
> Thanks
>
> Thanks,
> -Siwei
>
>
> Thanks
>
> Thanks,
> -Siwei
>
>
> 2) provision vDPA device with a subset of the features
>
> # vdpa dev add name dev1 mgmtdev vdpasim_net device_features 0x300020000
> # vdpa dev config show
> dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
> negotiated_features CTRL_VQ VERSION_1 ACCESS_PLATFORM
>
> Reviewed-by: Eli Cohen <elic@nvidia.com>
> Signed-off-by: Jason Wang <jasowang@redhat.com>
> ---
> drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 11 ++++++++++-
> 1 file changed, 10 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> index 886449e88502..a9ba02be378b 100644
> --- a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> +++ b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
> @@ -254,6 +254,14 @@ static int vdpasim_net_dev_add(struct vdpa_mgmt_dev *mdev, const char *name,
> dev_attr.work_fn = vdpasim_net_work;
> dev_attr.buffer_size = PAGE_SIZE;
>
> + if (config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) {
> + if (config->device_features &
> + ~dev_attr.supported_features)
> + return -EINVAL;
> + dev_attr.supported_features &=
> + config->device_features;
> + }
> +
> simdev = vdpasim_create(&dev_attr);
> if (IS_ERR(simdev))
> return PTR_ERR(simdev);
> @@ -294,7 +302,8 @@ static struct vdpa_mgmt_dev mgmt_dev = {
> .id_table = id_table,
> .ops = &vdpasim_net_mgmtdev_ops,
> .config_attr_mask = (1 << VDPA_ATTR_DEV_NET_CFG_MACADDR |
> - 1 << VDPA_ATTR_DEV_NET_CFG_MTU),
> + 1 << VDPA_ATTR_DEV_NET_CFG_MTU |
> + 1 << VDPA_ATTR_DEV_FEATURES),
> .max_supported_vqs = VDPASIM_NET_VQ_NUM,
> .supported_features = VDPASIM_NET_FEATURES,
> };
>
>
>
_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
2022-09-29 4:55 ` Jason Wang
@ 2022-10-07 0:35 ` Si-Wei Liu
-1 siblings, 0 replies; 55+ messages in thread
From: Si-Wei Liu @ 2022-10-07 0:35 UTC (permalink / raw)
To: Jason Wang
Cc: mst, Eli Cohen, Parav Pandit, Wu Zongyong, virtualization,
linux-kernel, eperezma, Zhu Lingshan, Gautam Dawar, Cindy Lu,
Yongji Xie
On 9/28/2022 9:55 PM, Jason Wang wrote:
> On Tue, Sep 27, 2022 at 5:41 PM Si-Wei Liu <si-wei.liu@oracle.com> wrote:
>>
>>
>> On 9/26/2022 8:59 PM, Jason Wang wrote:
>>
>> On Tue, Sep 27, 2022 at 9:02 AM Si-Wei Liu <si-wei.liu@oracle.com> wrote:
>>
>>
>> On 9/26/2022 12:11 AM, Jason Wang wrote:
>>
>> On Sat, Sep 24, 2022 at 4:01 AM Si-Wei Liu <si-wei.liu@oracle.com> wrote:
>>
>>
>> On 9/21/2022 7:43 PM, Jason Wang wrote:
>>
>> This patch implements features provisioning for vdpa_sim_net.
>>
>> 1) validating the provisioned features to be a subset of the parent
>> features.
>> 2) clearing the features that is not wanted by the userspace
>>
>> For example:
>>
>> # vdpa mgmtdev show
>> vdpasim_net:
>> supported_classes net
>> max_supported_vqs 3
>> dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM
>>
>> Sighs, not to blame any one and it's perhaps too late, but this
>> "dev_features" attr in "mgmtdev show" command output should have been
>> called "supported_features" in the first place.
>>
>> Not sure I get this, but I guess this is the negotiated features actually.
>>
>> Actually no, that is why I said the name is a bit confusing and "supported_features" might sound better.
>>
>> You're right, it's an mgmtdev show actually.
>>
>> This attribute in the parent device (mgmtdev) denotes the real device capability for what virtio features can be supported by the parent device. Any unprivileged user can check into this field to know parent device's capability without having to create a child vDPA device at all. The features that child vDPA device may support should be a subset of, or at most up to what the parent device offers. For e.g. the vdpa device dev1 you created below can expose less or equal device_features bit than 0x308820028 (MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM), but shouldn't be no more than what the parent device can actually support.
>>
>> Yes, I didn't see anything wrong with "dev_features",
>>
>> Yep, it didn't appear to me anything wrong either at first sight, then I gave my R-b on the series introduced this attribute. But it's not a perfect name, either, on the other hand. Parav later pointed out that the corresponding enum definition for this attribute should follow pre-existing naming convention that we should perhaps do s/VDPA_ATTR_DEV_SUPPORTED_FEATURES/VDPA_ATTR_MGMTDEV_SUPPORTED_FEATURES/ to get it renamed, as this is a mgmtdev level attribute, which I agree. Now that with the upcoming "device_features" attribute (vdpa dev level) from this series, it's subject to another confusions between these two similar names, but actually would represent things at different level. While all other attributes in "mgmtdev dev show" seem to be aligned with the "supported_" prefix, e.g. supported_classes, max_supported_vqs, from which I think the stance of device is already implied through "mgmtdev" in the command. For the perspective of clarify and easy distinction, "supported_features" seems to be a better name than "dev_features".
> See another reply, I think I get your point,
>
> 1) VDPA_ATTR_VDPA_DEV_SUPPORTED_FEATURES (lingshan's series) and
> VDPA_ATTR_VDPA_DEV_FEATURES should be equivalent and unified to a
> single attribute.
> 2) A better name to "supported_features" should be fine, patches are welcomed
>
>> it aligns to the
>> virtio spec which means the features could be used to create a vdpa
>> device. But if everyone agree on the renaming, I'm fine.
>>
>> Never mind, if it's late don't have to bother.
>>
>>
>>
>> I think Ling Shan is working on reporting both negotiated features
>> with the device features.
>>
>> Does it imply this series is connected to another work in parallel? Is it possible to add a reference in the cover letter?
>>
>> I'm not sure, I remember Ling Shan did some work to not block the
>> config show in this commit:
>>
>> commit a34bed37fc9d3da319bb75dfbf02a7d3e95e12de
>> Author: Zhu Lingshan <lingshan.zhu@intel.com>
>> Date: Fri Jul 22 19:53:07 2022 +0800
>>
>> vDPA: !FEATURES_OK should not block querying device config space
>>
>> We need some changes in the vdpa tool to show device_features
>> unconditionally in the "dev config show" command.
>>
>> That's true, I think I ever pointed it out to Lingshan before, that it's not needed to bother exposing those config space fields in "dev config show" output, if the only intent is for live migration of device features between nodes. For vDPA live migration, what cares most is those configuration parameters specified on vdpa creation, and userspace VMM (QEMU) is supposed to take care of saving and restoring live device states. I think it's easier to extend "vdpa dev show" output to include device_features and other config params as well, rather than count on validity of various config space fields.
> Probably, but for the migration it's more about the ability of the
> mgmtdev instead of the vDPA device itself I think.
If picking the appropriate device for migration is what it is concerned,
it's subject to the capability that mgmtdev offers. That's true, for sure.
On the other hand, mgmt software would also need to take care of
reconstructing the destination device with the same configuration as
that at the source side. For example, a mgmtdev on source supports
features A, B, C, D, and destination mgmtdev supports features B, C, D,
E. When vdpa device on the source is initially created with features B
and C but without feature D (noted: creation with a subset of mgmtdev
features was already supported before, and this series just makes it
more explicit), the mgmt software is supposed to equally create a device
with features B and C on dest, even though the destination may support
feature D that the mgmtdev on both sides can support. My point is, we
should have some flexibility on the mgmt software implementation that
allows the mgmt software to easily tell apart the exact features (i.e. B
and C in the above example) and the exact configuration a specific vdpa
device was originally created with, via some simple query command.
Having mgmt software to remember the vdpa creation args could work, but
on the other hand it'd be nice to allow lightweight software
implementation without having to persist the list of vdpa args and make
vdpa tool more self-contained.
I will post a patch (series) shortly to demonstrate this idea.
Basically, there's no actual need to mess around with those config space
values for live migration. It was not built for that purpose.
>
>> https://lore.kernel.org/virtualization/454bdf1b-daa1-aa67-2b8c-bc15351c1851@oracle.com/
>>
>> It's not just insufficient, but sometimes is incorrect to create vDPA device using the config space fields. For instance, MAC address in config space can be changed temporarily (until device reset) via ctrl_vq VIRTIO_NET_CTRL_MAC_ADDR_SET command. It's incorrect to create vDPA using the MAC address shown in the config space.
> I think it's still a must for create the mac with the exact mac address:
>
> 1) VIRTIO_NET_F_CTRL_MAC is not a must
> 2) there's no way for us to know whether or not the mac has been changed
Noted I think here we are still talking about VERSION_1 device which is
spec conforming. So far as I understand the spec, if the
VIRTIO_NET_F_CTRL_MAC feature is not negotiated, there's no way for
driver to change the default MAC address.
Even if we want to simulate or support a legacy device model, when MAC
address is changed by legacy driver somehow, QEMU should be able to
detect this and issue a vdpa ioctl call to change the MAC address filter
underneath. I don't see that it ever happens in today's code, so I
presume the only possibility this may work is that the specific vDPA
device may have an internal learning bridge that adapts to what MAC
address the driver actually sends. In this case, since the device
doesn't care, recreate with the MAC in use is not needed, and
technically it is even incorrect. In data centers or cloud environment,
MAC address is usually controlled and managed by some central
entity/service. If a driver can dominate the MAC address in use by
deliberately overriding the default MAC and bypassing the central rule
via live migration, that'd be a more severe security issue to address in
the first place.
> 3) migration code can restore the mac during restore
>
> So exactly the same mac address is still required. (This is the same
> as we are doing for live migration on software virtio)
>
>> Another example, if the source vDPA device has MAC address table size limit of 100, then in the destination we should pick parent device with size limit no smaller than that, and create vDPA on remote node matching the exact same size. There's nothing config space field can assist here.
> Two ways:
>
> 1) mgmtdev should show the mac table size so mgmt layer can provision
> the mac table size
> 2) If the mac table exceeds what is supported in the destination, it
> needs to enable the all uni in this case.
Yep, so no field in the config space can help with these two solutions,
right? MAC table size is not showing up there. Whether the parent device
supports ALLUNI via VIRTIO_NET_F_CTRL_RX is not there, either. (showing
them in the 'vdpa mgmtdev show' output is the right thing IMHO).
>
>> One example further, in the future, if we are going to introduce mandatory feature (for e.g. VERSION_1, RING_PACKED) that the device is unable to support the opposite case, the destination device should be created with equally same mandatory device features, which only vDPA creation parameters should matter. While I can't think of a case that the mgmt software or live migration tool would have to count on config space fields only.
> Yes, in this case we need to introduce new netlink attributes for both
> getting mandatory features from the management device and provisioning
> those manadating features.
True, management device level thing again, not related to anything in
the config space.
>
>>
>>
>>
>> 1) provision vDPA device with all features that are supported by the
>> net simulator
>>
>> # vdpa dev add name dev1 mgmtdev vdpasim_net
>> # vdpa dev config show
>> dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
>> negotiated_features MTU MAC CTRL_VQ CTRL_MAC_ADDR VERSION_1 ACCESS_PLATFORM
>>
>> Maybe not in this patch, but for completeness for the whole series,
>> could we also add device_features to the output?
>>
>> Lingshan, could you please share your thoughts or patch on this?
>>
>> Noted here the device_features argument specified during vdpa creation is introduced by this series itself, it somehow slightly changed the original semantics of what device_features used to be.
>>
>> I'm not sure I get this, we don't support device_features in the past
>> and it is used to provision device features to the vDPA device which
>> seems to be fine.
>>
>> Before this change, only look at the dev_features in "mgmtdev show" and remember creation parameters is sufficient to get to all needed info for creating vDPA at destination.
> Note that even with the same vendor, mgmtdev may support different features.
>
>> After this change, dev_features in "mgmtdev show" becomes less relevant, as it would need to remember vdpa creation parameters plus the device_features attribute. While this series allows cross vendor live migration, it would complicate the implementation of mgmt software, on the other hand.
> To allow cross vendor live migration I couldn't find a better way.
The idea itself is great, I think, though the CLI interface may have
some space for improvement. For example, user has to supply the heximal
value consisting of each feature bit, which is a bit challenging for
normal users who are not super familiar with each virtio feature. On the
other hand, there could be ambiguity against other vdpa create option,
e.g. users may do "vdpa dev add name vdpa0 mgmtdev ... mtu 1500
device_features 0x300020000" (no F_MTU feature bit in device_features)
that needs special validation in the code.
How about we follow the CPU flags model or QEMU virtio-net-pci args to
define property representing each feature bit? I think the current
convention for each "vdpa dev add" option implies that the corresponding
feature bit will be enabled once specified in creation. Similarly we can
introduce additional option representing each feature bit, along with a
new features_default property denoting the initial value for
device_feature bits:
# vdpa mgmtdev show
vdpasim_net:
supported_classes net
max_supported_vqs 3
dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM
# vdpa dev add name dev1 mgmtdev vdpasim_net features_default off \
csum on guest_csum on mtu 2000 ctrl_vq on version1 on access_platform on
# vdpa dev show
dev1: type network mgmtdev vdpasim_net vendor_id 0 max_vqs 3 max_vq_size 256
features_default off mtu 2000
device_features CSUM GUEST_CSUM MTU CTRL_VQ VERSION_1 ACCESS_PLATFORM
If the features_default property is left unspecified or with the
"inherited" value, it would just inherit all of the supported_features
from mgmtdev (which is already the case of today).
# vdpa dev add name dev1 mgmtdev vdpasim_net features_default inherited
# vdpa dev show
dev1: type network mgmtdev vdpasim_net vendor_id 0 max_vqs 3 max_vq_size 256
features_default inherited
device_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM
I can definitely help implement this model if you find it fits.
>
>>
>>
>> When simply look at the "vdpa dev config show" output, I cannot really
>> tell the actual device_features that was used in vdpa creation. For e.g.
>> there is a missing feature ANY_LAYOUT from negotiated_features compared
>> with supported_features in mgmtdev, but the orchestration software
>> couldn't tell if the vdpa device on destination host should be created
>> with or without the ANY_LAYOUT feature.
>>
>> I think VERSION_1 implies ANY_LAYOUT.
>>
>> Right, ANY_LAYOUT is a bad example. A good example might be that, I knew the parent mgmtdev on migration source node supports CTRL_MAC_ADDR, but I don't find it in negotiated_features.
>>
>> I think we should use the features that we got from "mgmtdev show"
>> instead of "negotiated features".
>>
>> That was how it's supposed to work previously, but with this series, I think the newly introduced device_features will be needed instead of the one in "mgmtdev show".
> Just to clarify, there won't be a device_features in mgmtdev show
> since it is device specific, each individual device can have its own
> device features which are subset of what is supported by the mgmtdev.
Yep.
>
>>
>> On the migration destination node, the parent device does support all features as the source offers, including CTRL_MAC_ADDR. What device features you would expect the mgmt software to create destination vdpa device with, if not otherwise requiring mgmt software to remember all the arguments on device creation?
> So the provisioning in the destination should use exactly the same
> device_feautres as what the vdpa device has in the source. But before
> this, management layer should guarantee to provision a vDPA device
> whose device_features can be supported on the destination in order to
> allow live migration.
Exactly.
>
>> So in this example, we need use "dev_features" so we get exact the
>> same features after and operation as either src or dst.
>>
>> If the device_features vDPA created with at the source doesn't include CTRL_MAC_ADDR even though parent supports it, then the vDPA to be created at the destination shouldn't come with CTRL_MAC_ADDR either, regardless of whether or not CTRL_MAC_ADDR is present in destination "mgmtdev show".
>>
>> However, if just taking look at negotiated_features, some mgmt software implementations which don't persist the creation parameters can't get the device features a certain vDPA device at the source node was created with.
>>
>>
>> SOURCE# vdpa mgmtdev show
>> vdpasim_net:
>> supported_classes net
>> max_supported_vqs 3
>> dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM
>> SOURCE# vdpa dev config show
>> dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
>> negotiated_features MTU MAC CTRL_VQ VERSION_1 ACCESS_PLATFORM
>>
>> DESTINATION# vdpa mgmtdev show
>> vdpasim_net:
>> supported_classes net
>> max_supported_vqs 3
>> dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM
>>
>> But it should be sufficient to
>> use features_src & feature_dst in this case. Actually, it should work
>> similar as to the cpu flags, the management software should introduce
>> the concept of cluster which means the maximal set of common features
>> is calculated and provisioned during device creation to allow
>> migration among the nodes inside the cluster.
>>
>> Yes, this is one way mgmt software may implement, but I am not sure if it's the only way. For e.g. for cpu flags, mgmt software can infer the guest cpus features in use from all qemu command line arguments and host cpu features/capability, which doesn't need to remember creation arguments and is easy to recover from failure without having to make the VM config persistent in data store. I thought it would be great if vdpa CLI design could offer the same.
>>
>> One minor difference is that we have cpu model abstraction, so we can
>> have things like:
>>
>> ./qemu-system-x86_64 -cpu EPYC
>>
>> Which implies the cpu features/flags where vDPA doesn't have. But
>> consider it's just a 64bit (or 128 in the future), it doesn't seems to
>> be too complex for the management to know, we probably need to start
>> from this and then we can try to introduce some generation/model after
>> it is agreed on most of the vendors.
>>
>> What you refer to is the so-called named model for CPU flags. I think it's a good addition to have some generation or named model defined for vDPA. But I don't get the point for how it relates to exposing the actual value of device features? Are you saying in this case you'd rather expose the model name than the actual value of feature bits? Well, I think we can expose both in different fields when there's really such a need.
> It's something like:
>
> vdpa dev add name dev1 mgmtdev vdpasim_net device_features VDPA_NET_MODEL_1
>
> and VDPA_NET_MODEL_1 implies some feature sets.
Not sure if this could be very useful for virtio devices, given we don't
have a determined set of virtio features unlike CPU generation/model,
but I think even with the features_default property we can still achieve
that.
-Siwei
>
>> BTW with regard to the cpu model in mgmt software implementation, the one implemented in libvirt is a mixed "Host model" [1] with taking advantage of QEMU named model and exposing additional individual CPU features that gets close to what host CPU offers.
> So creating vDPA device without "device_features" is somehow the host
> model, it will have all features that is supported by the parent.
>
>> I think this implies that mgmt software should have to understand what the model name really means in terms of individual CPU features, so having feature bit value exposed will just do more help if vDPA goes the same way.
> Exactly.
>
> Thanks
>
>>
>> Regards,
>> -Siwei
>>
>> [1] https://qemu-project.gitlab.io/qemu/system/qemu-cpu-models.html#two-ways-to-configure-cpu-models-with-qemu-kvm
>>
>>
>> Thanks
>>
>> Thanks,
>> -Siwei
>>
>>
>> Thanks
>>
>> Thanks,
>> -Siwei
>>
>>
>> 2) provision vDPA device with a subset of the features
>>
>> # vdpa dev add name dev1 mgmtdev vdpasim_net device_features 0x300020000
>> # vdpa dev config show
>> dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
>> negotiated_features CTRL_VQ VERSION_1 ACCESS_PLATFORM
>>
>> Reviewed-by: Eli Cohen <elic@nvidia.com>
>> Signed-off-by: Jason Wang <jasowang@redhat.com>
>> ---
>> drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 11 ++++++++++-
>> 1 file changed, 10 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
>> index 886449e88502..a9ba02be378b 100644
>> --- a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
>> +++ b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
>> @@ -254,6 +254,14 @@ static int vdpasim_net_dev_add(struct vdpa_mgmt_dev *mdev, const char *name,
>> dev_attr.work_fn = vdpasim_net_work;
>> dev_attr.buffer_size = PAGE_SIZE;
>>
>> + if (config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) {
>> + if (config->device_features &
>> + ~dev_attr.supported_features)
>> + return -EINVAL;
>> + dev_attr.supported_features &=
>> + config->device_features;
>> + }
>> +
>> simdev = vdpasim_create(&dev_attr);
>> if (IS_ERR(simdev))
>> return PTR_ERR(simdev);
>> @@ -294,7 +302,8 @@ static struct vdpa_mgmt_dev mgmt_dev = {
>> .id_table = id_table,
>> .ops = &vdpasim_net_mgmtdev_ops,
>> .config_attr_mask = (1 << VDPA_ATTR_DEV_NET_CFG_MACADDR |
>> - 1 << VDPA_ATTR_DEV_NET_CFG_MTU),
>> + 1 << VDPA_ATTR_DEV_NET_CFG_MTU |
>> + 1 << VDPA_ATTR_DEV_FEATURES),
>> .max_supported_vqs = VDPASIM_NET_VQ_NUM,
>> .supported_features = VDPASIM_NET_FEATURES,
>> };
>>
>>
>>
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
@ 2022-10-07 0:35 ` Si-Wei Liu
0 siblings, 0 replies; 55+ messages in thread
From: Si-Wei Liu @ 2022-10-07 0:35 UTC (permalink / raw)
To: Jason Wang
Cc: Cindy Lu, mst, Yongji Xie, linux-kernel, Gautam Dawar,
virtualization, eperezma, Wu Zongyong, Eli Cohen, Zhu Lingshan
On 9/28/2022 9:55 PM, Jason Wang wrote:
> On Tue, Sep 27, 2022 at 5:41 PM Si-Wei Liu <si-wei.liu@oracle.com> wrote:
>>
>>
>> On 9/26/2022 8:59 PM, Jason Wang wrote:
>>
>> On Tue, Sep 27, 2022 at 9:02 AM Si-Wei Liu <si-wei.liu@oracle.com> wrote:
>>
>>
>> On 9/26/2022 12:11 AM, Jason Wang wrote:
>>
>> On Sat, Sep 24, 2022 at 4:01 AM Si-Wei Liu <si-wei.liu@oracle.com> wrote:
>>
>>
>> On 9/21/2022 7:43 PM, Jason Wang wrote:
>>
>> This patch implements features provisioning for vdpa_sim_net.
>>
>> 1) validating the provisioned features to be a subset of the parent
>> features.
>> 2) clearing the features that is not wanted by the userspace
>>
>> For example:
>>
>> # vdpa mgmtdev show
>> vdpasim_net:
>> supported_classes net
>> max_supported_vqs 3
>> dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM
>>
>> Sighs, not to blame any one and it's perhaps too late, but this
>> "dev_features" attr in "mgmtdev show" command output should have been
>> called "supported_features" in the first place.
>>
>> Not sure I get this, but I guess this is the negotiated features actually.
>>
>> Actually no, that is why I said the name is a bit confusing and "supported_features" might sound better.
>>
>> You're right, it's an mgmtdev show actually.
>>
>> This attribute in the parent device (mgmtdev) denotes the real device capability for what virtio features can be supported by the parent device. Any unprivileged user can check into this field to know parent device's capability without having to create a child vDPA device at all. The features that child vDPA device may support should be a subset of, or at most up to what the parent device offers. For e.g. the vdpa device dev1 you created below can expose less or equal device_features bit than 0x308820028 (MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM), but shouldn't be no more than what the parent device can actually support.
>>
>> Yes, I didn't see anything wrong with "dev_features",
>>
>> Yep, it didn't appear to me anything wrong either at first sight, then I gave my R-b on the series introduced this attribute. But it's not a perfect name, either, on the other hand. Parav later pointed out that the corresponding enum definition for this attribute should follow pre-existing naming convention that we should perhaps do s/VDPA_ATTR_DEV_SUPPORTED_FEATURES/VDPA_ATTR_MGMTDEV_SUPPORTED_FEATURES/ to get it renamed, as this is a mgmtdev level attribute, which I agree. Now that with the upcoming "device_features" attribute (vdpa dev level) from this series, it's subject to another confusions between these two similar names, but actually would represent things at different level. While all other attributes in "mgmtdev dev show" seem to be aligned with the "supported_" prefix, e.g. supported_classes, max_supported_vqs, from which I think the stance of device is already implied through "mgmtdev" in the command. For the perspective of clarify and easy distinction, "supported_features" seems to be a better name than "dev_features".
> See another reply, I think I get your point,
>
> 1) VDPA_ATTR_VDPA_DEV_SUPPORTED_FEATURES (lingshan's series) and
> VDPA_ATTR_VDPA_DEV_FEATURES should be equivalent and unified to a
> single attribute.
> 2) A better name to "supported_features" should be fine, patches are welcomed
>
>> it aligns to the
>> virtio spec which means the features could be used to create a vdpa
>> device. But if everyone agree on the renaming, I'm fine.
>>
>> Never mind, if it's late don't have to bother.
>>
>>
>>
>> I think Ling Shan is working on reporting both negotiated features
>> with the device features.
>>
>> Does it imply this series is connected to another work in parallel? Is it possible to add a reference in the cover letter?
>>
>> I'm not sure, I remember Ling Shan did some work to not block the
>> config show in this commit:
>>
>> commit a34bed37fc9d3da319bb75dfbf02a7d3e95e12de
>> Author: Zhu Lingshan <lingshan.zhu@intel.com>
>> Date: Fri Jul 22 19:53:07 2022 +0800
>>
>> vDPA: !FEATURES_OK should not block querying device config space
>>
>> We need some changes in the vdpa tool to show device_features
>> unconditionally in the "dev config show" command.
>>
>> That's true, I think I ever pointed it out to Lingshan before, that it's not needed to bother exposing those config space fields in "dev config show" output, if the only intent is for live migration of device features between nodes. For vDPA live migration, what cares most is those configuration parameters specified on vdpa creation, and userspace VMM (QEMU) is supposed to take care of saving and restoring live device states. I think it's easier to extend "vdpa dev show" output to include device_features and other config params as well, rather than count on validity of various config space fields.
> Probably, but for the migration it's more about the ability of the
> mgmtdev instead of the vDPA device itself I think.
If picking the appropriate device for migration is what it is concerned,
it's subject to the capability that mgmtdev offers. That's true, for sure.
On the other hand, mgmt software would also need to take care of
reconstructing the destination device with the same configuration as
that at the source side. For example, a mgmtdev on source supports
features A, B, C, D, and destination mgmtdev supports features B, C, D,
E. When vdpa device on the source is initially created with features B
and C but without feature D (noted: creation with a subset of mgmtdev
features was already supported before, and this series just makes it
more explicit), the mgmt software is supposed to equally create a device
with features B and C on dest, even though the destination may support
feature D that the mgmtdev on both sides can support. My point is, we
should have some flexibility on the mgmt software implementation that
allows the mgmt software to easily tell apart the exact features (i.e. B
and C in the above example) and the exact configuration a specific vdpa
device was originally created with, via some simple query command.
Having mgmt software to remember the vdpa creation args could work, but
on the other hand it'd be nice to allow lightweight software
implementation without having to persist the list of vdpa args and make
vdpa tool more self-contained.
I will post a patch (series) shortly to demonstrate this idea.
Basically, there's no actual need to mess around with those config space
values for live migration. It was not built for that purpose.
>
>> https://lore.kernel.org/virtualization/454bdf1b-daa1-aa67-2b8c-bc15351c1851@oracle.com/
>>
>> It's not just insufficient, but sometimes is incorrect to create vDPA device using the config space fields. For instance, MAC address in config space can be changed temporarily (until device reset) via ctrl_vq VIRTIO_NET_CTRL_MAC_ADDR_SET command. It's incorrect to create vDPA using the MAC address shown in the config space.
> I think it's still a must for create the mac with the exact mac address:
>
> 1) VIRTIO_NET_F_CTRL_MAC is not a must
> 2) there's no way for us to know whether or not the mac has been changed
Noted I think here we are still talking about VERSION_1 device which is
spec conforming. So far as I understand the spec, if the
VIRTIO_NET_F_CTRL_MAC feature is not negotiated, there's no way for
driver to change the default MAC address.
Even if we want to simulate or support a legacy device model, when MAC
address is changed by legacy driver somehow, QEMU should be able to
detect this and issue a vdpa ioctl call to change the MAC address filter
underneath. I don't see that it ever happens in today's code, so I
presume the only possibility this may work is that the specific vDPA
device may have an internal learning bridge that adapts to what MAC
address the driver actually sends. In this case, since the device
doesn't care, recreate with the MAC in use is not needed, and
technically it is even incorrect. In data centers or cloud environment,
MAC address is usually controlled and managed by some central
entity/service. If a driver can dominate the MAC address in use by
deliberately overriding the default MAC and bypassing the central rule
via live migration, that'd be a more severe security issue to address in
the first place.
> 3) migration code can restore the mac during restore
>
> So exactly the same mac address is still required. (This is the same
> as we are doing for live migration on software virtio)
>
>> Another example, if the source vDPA device has MAC address table size limit of 100, then in the destination we should pick parent device with size limit no smaller than that, and create vDPA on remote node matching the exact same size. There's nothing config space field can assist here.
> Two ways:
>
> 1) mgmtdev should show the mac table size so mgmt layer can provision
> the mac table size
> 2) If the mac table exceeds what is supported in the destination, it
> needs to enable the all uni in this case.
Yep, so no field in the config space can help with these two solutions,
right? MAC table size is not showing up there. Whether the parent device
supports ALLUNI via VIRTIO_NET_F_CTRL_RX is not there, either. (showing
them in the 'vdpa mgmtdev show' output is the right thing IMHO).
>
>> One example further, in the future, if we are going to introduce mandatory feature (for e.g. VERSION_1, RING_PACKED) that the device is unable to support the opposite case, the destination device should be created with equally same mandatory device features, which only vDPA creation parameters should matter. While I can't think of a case that the mgmt software or live migration tool would have to count on config space fields only.
> Yes, in this case we need to introduce new netlink attributes for both
> getting mandatory features from the management device and provisioning
> those manadating features.
True, management device level thing again, not related to anything in
the config space.
>
>>
>>
>>
>> 1) provision vDPA device with all features that are supported by the
>> net simulator
>>
>> # vdpa dev add name dev1 mgmtdev vdpasim_net
>> # vdpa dev config show
>> dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
>> negotiated_features MTU MAC CTRL_VQ CTRL_MAC_ADDR VERSION_1 ACCESS_PLATFORM
>>
>> Maybe not in this patch, but for completeness for the whole series,
>> could we also add device_features to the output?
>>
>> Lingshan, could you please share your thoughts or patch on this?
>>
>> Noted here the device_features argument specified during vdpa creation is introduced by this series itself, it somehow slightly changed the original semantics of what device_features used to be.
>>
>> I'm not sure I get this, we don't support device_features in the past
>> and it is used to provision device features to the vDPA device which
>> seems to be fine.
>>
>> Before this change, only look at the dev_features in "mgmtdev show" and remember creation parameters is sufficient to get to all needed info for creating vDPA at destination.
> Note that even with the same vendor, mgmtdev may support different features.
>
>> After this change, dev_features in "mgmtdev show" becomes less relevant, as it would need to remember vdpa creation parameters plus the device_features attribute. While this series allows cross vendor live migration, it would complicate the implementation of mgmt software, on the other hand.
> To allow cross vendor live migration I couldn't find a better way.
The idea itself is great, I think, though the CLI interface may have
some space for improvement. For example, user has to supply the heximal
value consisting of each feature bit, which is a bit challenging for
normal users who are not super familiar with each virtio feature. On the
other hand, there could be ambiguity against other vdpa create option,
e.g. users may do "vdpa dev add name vdpa0 mgmtdev ... mtu 1500
device_features 0x300020000" (no F_MTU feature bit in device_features)
that needs special validation in the code.
How about we follow the CPU flags model or QEMU virtio-net-pci args to
define property representing each feature bit? I think the current
convention for each "vdpa dev add" option implies that the corresponding
feature bit will be enabled once specified in creation. Similarly we can
introduce additional option representing each feature bit, along with a
new features_default property denoting the initial value for
device_feature bits:
# vdpa mgmtdev show
vdpasim_net:
supported_classes net
max_supported_vqs 3
dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM
# vdpa dev add name dev1 mgmtdev vdpasim_net features_default off \
csum on guest_csum on mtu 2000 ctrl_vq on version1 on access_platform on
# vdpa dev show
dev1: type network mgmtdev vdpasim_net vendor_id 0 max_vqs 3 max_vq_size 256
features_default off mtu 2000
device_features CSUM GUEST_CSUM MTU CTRL_VQ VERSION_1 ACCESS_PLATFORM
If the features_default property is left unspecified or with the
"inherited" value, it would just inherit all of the supported_features
from mgmtdev (which is already the case of today).
# vdpa dev add name dev1 mgmtdev vdpasim_net features_default inherited
# vdpa dev show
dev1: type network mgmtdev vdpasim_net vendor_id 0 max_vqs 3 max_vq_size 256
features_default inherited
device_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM
I can definitely help implement this model if you find it fits.
>
>>
>>
>> When simply look at the "vdpa dev config show" output, I cannot really
>> tell the actual device_features that was used in vdpa creation. For e.g.
>> there is a missing feature ANY_LAYOUT from negotiated_features compared
>> with supported_features in mgmtdev, but the orchestration software
>> couldn't tell if the vdpa device on destination host should be created
>> with or without the ANY_LAYOUT feature.
>>
>> I think VERSION_1 implies ANY_LAYOUT.
>>
>> Right, ANY_LAYOUT is a bad example. A good example might be that, I knew the parent mgmtdev on migration source node supports CTRL_MAC_ADDR, but I don't find it in negotiated_features.
>>
>> I think we should use the features that we got from "mgmtdev show"
>> instead of "negotiated features".
>>
>> That was how it's supposed to work previously, but with this series, I think the newly introduced device_features will be needed instead of the one in "mgmtdev show".
> Just to clarify, there won't be a device_features in mgmtdev show
> since it is device specific, each individual device can have its own
> device features which are subset of what is supported by the mgmtdev.
Yep.
>
>>
>> On the migration destination node, the parent device does support all features as the source offers, including CTRL_MAC_ADDR. What device features you would expect the mgmt software to create destination vdpa device with, if not otherwise requiring mgmt software to remember all the arguments on device creation?
> So the provisioning in the destination should use exactly the same
> device_feautres as what the vdpa device has in the source. But before
> this, management layer should guarantee to provision a vDPA device
> whose device_features can be supported on the destination in order to
> allow live migration.
Exactly.
>
>> So in this example, we need use "dev_features" so we get exact the
>> same features after and operation as either src or dst.
>>
>> If the device_features vDPA created with at the source doesn't include CTRL_MAC_ADDR even though parent supports it, then the vDPA to be created at the destination shouldn't come with CTRL_MAC_ADDR either, regardless of whether or not CTRL_MAC_ADDR is present in destination "mgmtdev show".
>>
>> However, if just taking look at negotiated_features, some mgmt software implementations which don't persist the creation parameters can't get the device features a certain vDPA device at the source node was created with.
>>
>>
>> SOURCE# vdpa mgmtdev show
>> vdpasim_net:
>> supported_classes net
>> max_supported_vqs 3
>> dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM
>> SOURCE# vdpa dev config show
>> dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
>> negotiated_features MTU MAC CTRL_VQ VERSION_1 ACCESS_PLATFORM
>>
>> DESTINATION# vdpa mgmtdev show
>> vdpasim_net:
>> supported_classes net
>> max_supported_vqs 3
>> dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM
>>
>> But it should be sufficient to
>> use features_src & feature_dst in this case. Actually, it should work
>> similar as to the cpu flags, the management software should introduce
>> the concept of cluster which means the maximal set of common features
>> is calculated and provisioned during device creation to allow
>> migration among the nodes inside the cluster.
>>
>> Yes, this is one way mgmt software may implement, but I am not sure if it's the only way. For e.g. for cpu flags, mgmt software can infer the guest cpus features in use from all qemu command line arguments and host cpu features/capability, which doesn't need to remember creation arguments and is easy to recover from failure without having to make the VM config persistent in data store. I thought it would be great if vdpa CLI design could offer the same.
>>
>> One minor difference is that we have cpu model abstraction, so we can
>> have things like:
>>
>> ./qemu-system-x86_64 -cpu EPYC
>>
>> Which implies the cpu features/flags where vDPA doesn't have. But
>> consider it's just a 64bit (or 128 in the future), it doesn't seems to
>> be too complex for the management to know, we probably need to start
>> from this and then we can try to introduce some generation/model after
>> it is agreed on most of the vendors.
>>
>> What you refer to is the so-called named model for CPU flags. I think it's a good addition to have some generation or named model defined for vDPA. But I don't get the point for how it relates to exposing the actual value of device features? Are you saying in this case you'd rather expose the model name than the actual value of feature bits? Well, I think we can expose both in different fields when there's really such a need.
> It's something like:
>
> vdpa dev add name dev1 mgmtdev vdpasim_net device_features VDPA_NET_MODEL_1
>
> and VDPA_NET_MODEL_1 implies some feature sets.
Not sure if this could be very useful for virtio devices, given we don't
have a determined set of virtio features unlike CPU generation/model,
but I think even with the features_default property we can still achieve
that.
-Siwei
>
>> BTW with regard to the cpu model in mgmt software implementation, the one implemented in libvirt is a mixed "Host model" [1] with taking advantage of QEMU named model and exposing additional individual CPU features that gets close to what host CPU offers.
> So creating vDPA device without "device_features" is somehow the host
> model, it will have all features that is supported by the parent.
>
>> I think this implies that mgmt software should have to understand what the model name really means in terms of individual CPU features, so having feature bit value exposed will just do more help if vDPA goes the same way.
> Exactly.
>
> Thanks
>
>>
>> Regards,
>> -Siwei
>>
>> [1] https://qemu-project.gitlab.io/qemu/system/qemu-cpu-models.html#two-ways-to-configure-cpu-models-with-qemu-kvm
>>
>>
>> Thanks
>>
>> Thanks,
>> -Siwei
>>
>>
>> Thanks
>>
>> Thanks,
>> -Siwei
>>
>>
>> 2) provision vDPA device with a subset of the features
>>
>> # vdpa dev add name dev1 mgmtdev vdpasim_net device_features 0x300020000
>> # vdpa dev config show
>> dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
>> negotiated_features CTRL_VQ VERSION_1 ACCESS_PLATFORM
>>
>> Reviewed-by: Eli Cohen <elic@nvidia.com>
>> Signed-off-by: Jason Wang <jasowang@redhat.com>
>> ---
>> drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 11 ++++++++++-
>> 1 file changed, 10 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
>> index 886449e88502..a9ba02be378b 100644
>> --- a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
>> +++ b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
>> @@ -254,6 +254,14 @@ static int vdpasim_net_dev_add(struct vdpa_mgmt_dev *mdev, const char *name,
>> dev_attr.work_fn = vdpasim_net_work;
>> dev_attr.buffer_size = PAGE_SIZE;
>>
>> + if (config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) {
>> + if (config->device_features &
>> + ~dev_attr.supported_features)
>> + return -EINVAL;
>> + dev_attr.supported_features &=
>> + config->device_features;
>> + }
>> +
>> simdev = vdpasim_create(&dev_attr);
>> if (IS_ERR(simdev))
>> return PTR_ERR(simdev);
>> @@ -294,7 +302,8 @@ static struct vdpa_mgmt_dev mgmt_dev = {
>> .id_table = id_table,
>> .ops = &vdpasim_net_mgmtdev_ops,
>> .config_attr_mask = (1 << VDPA_ATTR_DEV_NET_CFG_MACADDR |
>> - 1 << VDPA_ATTR_DEV_NET_CFG_MTU),
>> + 1 << VDPA_ATTR_DEV_NET_CFG_MTU |
>> + 1 << VDPA_ATTR_DEV_FEATURES),
>> .max_supported_vqs = VDPASIM_NET_VQ_NUM,
>> .supported_features = VDPASIM_NET_FEATURES,
>> };
>>
>>
>>
_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
2022-09-29 4:10 ` Jason Wang
@ 2022-10-10 17:44 ` Si-Wei Liu
-1 siblings, 0 replies; 55+ messages in thread
From: Si-Wei Liu @ 2022-10-10 17:44 UTC (permalink / raw)
To: mst, Jason Wang, Parav Pandit
Cc: Eli Cohen, Wu Zongyong, virtualization, linux-kernel, eperezma,
Zhu Lingshan, Gautam Dawar, Cindy Lu, Yongji Xie
Hi Michael,
Noticed that you just merged this series that we now got two nominally
duplicated attributes: VDPA_ATTR_VDPA_DEV_SUPPORTED_FEATURES and
VDPA_ATTR_DEV_FEATURES. I think Jason agreed to remove one of them but
did not get chance to post a new series to catch up with the merge
window. Do you mind if I post a format patch similar as below to rectify
this quickly from linux-next, without unnecessarily getting the dup
exposed to the uAPI?
Thanks,
-Siwei
--- a/drivers/vdpa/vdpa.c
+++ b/drivers/vdpa/vdpa.c
@@ -855,7 +855,7 @@ static int vdpa_dev_net_config_fill(struct
vdpa_device *vdev, struct sk_buff *ms
features_device = vdev->config->get_device_features(vdev);
- if (nla_put_u64_64bit(msg,
VDPA_ATTR_VDPA_DEV_SUPPORTED_FEATURES, features_device,
+ if (nla_put_u64_64bit(msg, VDPA_ATTR_DEV_FEATURES, features_device,
VDPA_ATTR_PAD))
return -EMSGSIZE;
diff --git a/include/uapi/linux/vdpa.h b/include/uapi/linux/vdpa.h
index 9bd7923..6e620c3 100644
--- a/include/uapi/linux/vdpa.h
+++ b/include/uapi/linux/vdpa.h
@@ -53,10 +53,8 @@ enum vdpa_attr {
VDPA_ATTR_DEV_VENDOR_ATTR_NAME, /* string */
VDPA_ATTR_DEV_VENDOR_ATTR_VALUE, /* u64 */
- VDPA_ATTR_DEV_FEATURES, /* u64 */
-
/* virtio features that are supported by the vDPA device */
- VDPA_ATTR_VDPA_DEV_SUPPORTED_FEATURES, /* u64 */
+ VDPA_ATTR_DEV_FEATURES, /* u64 */
/* new attributes must be added above here */
VDPA_ATTR_MAX,
On 9/28/2022 9:10 PM, Jason Wang wrote:
> I think VDPA_ATTR_VDPA_DEV_SUPPORTED_FEATURES and
> VDPA_ATTR_DEV_FEATURES are equivalent, we can rebase on each other if
> it is needed.
>
> Thanks
>
>
^ permalink raw reply related [flat|nested] 55+ messages in thread
* Re: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
@ 2022-10-10 17:44 ` Si-Wei Liu
0 siblings, 0 replies; 55+ messages in thread
From: Si-Wei Liu @ 2022-10-10 17:44 UTC (permalink / raw)
To: mst, Jason Wang, Parav Pandit
Cc: Cindy Lu, Yongji Xie, linux-kernel, Gautam Dawar, virtualization,
eperezma, Wu Zongyong, Eli Cohen, Zhu Lingshan
Hi Michael,
Noticed that you just merged this series that we now got two nominally
duplicated attributes: VDPA_ATTR_VDPA_DEV_SUPPORTED_FEATURES and
VDPA_ATTR_DEV_FEATURES. I think Jason agreed to remove one of them but
did not get chance to post a new series to catch up with the merge
window. Do you mind if I post a format patch similar as below to rectify
this quickly from linux-next, without unnecessarily getting the dup
exposed to the uAPI?
Thanks,
-Siwei
--- a/drivers/vdpa/vdpa.c
+++ b/drivers/vdpa/vdpa.c
@@ -855,7 +855,7 @@ static int vdpa_dev_net_config_fill(struct
vdpa_device *vdev, struct sk_buff *ms
features_device = vdev->config->get_device_features(vdev);
- if (nla_put_u64_64bit(msg,
VDPA_ATTR_VDPA_DEV_SUPPORTED_FEATURES, features_device,
+ if (nla_put_u64_64bit(msg, VDPA_ATTR_DEV_FEATURES, features_device,
VDPA_ATTR_PAD))
return -EMSGSIZE;
diff --git a/include/uapi/linux/vdpa.h b/include/uapi/linux/vdpa.h
index 9bd7923..6e620c3 100644
--- a/include/uapi/linux/vdpa.h
+++ b/include/uapi/linux/vdpa.h
@@ -53,10 +53,8 @@ enum vdpa_attr {
VDPA_ATTR_DEV_VENDOR_ATTR_NAME, /* string */
VDPA_ATTR_DEV_VENDOR_ATTR_VALUE, /* u64 */
- VDPA_ATTR_DEV_FEATURES, /* u64 */
-
/* virtio features that are supported by the vDPA device */
- VDPA_ATTR_VDPA_DEV_SUPPORTED_FEATURES, /* u64 */
+ VDPA_ATTR_DEV_FEATURES, /* u64 */
/* new attributes must be added above here */
VDPA_ATTR_MAX,
On 9/28/2022 9:10 PM, Jason Wang wrote:
> I think VDPA_ATTR_VDPA_DEV_SUPPORTED_FEATURES and
> VDPA_ATTR_DEV_FEATURES are equivalent, we can rebase on each other if
> it is needed.
>
> Thanks
>
>
_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
^ permalink raw reply related [flat|nested] 55+ messages in thread
* Re: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
2022-10-07 0:35 ` Si-Wei Liu
@ 2022-10-13 7:10 ` Jason Wang
-1 siblings, 0 replies; 55+ messages in thread
From: Jason Wang @ 2022-10-13 7:10 UTC (permalink / raw)
To: Si-Wei Liu
Cc: Cindy Lu, mst, Yongji Xie, linux-kernel, Gautam Dawar,
virtualization, eperezma, Wu Zongyong, Eli Cohen, Zhu Lingshan
在 2022/10/7 08:35, Si-Wei Liu 写道:
>
>
> On 9/28/2022 9:55 PM, Jason Wang wrote:
>> On Tue, Sep 27, 2022 at 5:41 PM Si-Wei Liu <si-wei.liu@oracle.com>
>> wrote:
>>>
>>>
>>> On 9/26/2022 8:59 PM, Jason Wang wrote:
>>>
>>> On Tue, Sep 27, 2022 at 9:02 AM Si-Wei Liu <si-wei.liu@oracle.com>
>>> wrote:
>>>
>>>
>>> On 9/26/2022 12:11 AM, Jason Wang wrote:
>>>
>>> On Sat, Sep 24, 2022 at 4:01 AM Si-Wei Liu <si-wei.liu@oracle.com>
>>> wrote:
>>>
>>>
>>> On 9/21/2022 7:43 PM, Jason Wang wrote:
>>>
>>> This patch implements features provisioning for vdpa_sim_net.
>>>
>>> 1) validating the provisioned features to be a subset of the parent
>>> features.
>>> 2) clearing the features that is not wanted by the userspace
>>>
>>> For example:
>>>
>>> # vdpa mgmtdev show
>>> vdpasim_net:
>>> supported_classes net
>>> max_supported_vqs 3
>>> dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1
>>> ACCESS_PLATFORM
>>>
>>> Sighs, not to blame any one and it's perhaps too late, but this
>>> "dev_features" attr in "mgmtdev show" command output should have been
>>> called "supported_features" in the first place.
>>>
>>> Not sure I get this, but I guess this is the negotiated features
>>> actually.
>>>
>>> Actually no, that is why I said the name is a bit confusing and
>>> "supported_features" might sound better.
>>>
>>> You're right, it's an mgmtdev show actually.
>>>
>>> This attribute in the parent device (mgmtdev) denotes the real
>>> device capability for what virtio features can be supported by the
>>> parent device. Any unprivileged user can check into this field to
>>> know parent device's capability without having to create a child
>>> vDPA device at all. The features that child vDPA device may support
>>> should be a subset of, or at most up to what the parent device
>>> offers. For e.g. the vdpa device dev1 you created below can expose
>>> less or equal device_features bit than 0x308820028 (MTU MAC CTRL_VQ
>>> CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM), but shouldn't
>>> be no more than what the parent device can actually support.
>>>
>>> Yes, I didn't see anything wrong with "dev_features",
>>>
>>> Yep, it didn't appear to me anything wrong either at first sight,
>>> then I gave my R-b on the series introduced this attribute. But it's
>>> not a perfect name, either, on the other hand. Parav later pointed
>>> out that the corresponding enum definition for this attribute should
>>> follow pre-existing naming convention that we should perhaps do
>>> s/VDPA_ATTR_DEV_SUPPORTED_FEATURES/VDPA_ATTR_MGMTDEV_SUPPORTED_FEATURES/
>>> to get it renamed, as this is a mgmtdev level attribute, which I
>>> agree. Now that with the upcoming "device_features" attribute (vdpa
>>> dev level) from this series, it's subject to another confusions
>>> between these two similar names, but actually would represent things
>>> at different level. While all other attributes in "mgmtdev dev show"
>>> seem to be aligned with the "supported_" prefix, e.g.
>>> supported_classes, max_supported_vqs, from which I think the stance
>>> of device is already implied through "mgmtdev" in the command. For
>>> the perspective of clarify and easy distinction,
>>> "supported_features" seems to be a better name than "dev_features".
>> See another reply, I think I get your point,
>>
>> 1) VDPA_ATTR_VDPA_DEV_SUPPORTED_FEATURES (lingshan's series) and
>> VDPA_ATTR_VDPA_DEV_FEATURES should be equivalent and unified to a
>> single attribute.
>> 2) A better name to "supported_features" should be fine, patches are
>> welcomed
>>
>>> it aligns to the
>>> virtio spec which means the features could be used to create a vdpa
>>> device. But if everyone agree on the renaming, I'm fine.
>>>
>>> Never mind, if it's late don't have to bother.
>>>
>>>
>>>
>>> I think Ling Shan is working on reporting both negotiated features
>>> with the device features.
>>>
>>> Does it imply this series is connected to another work in parallel?
>>> Is it possible to add a reference in the cover letter?
>>>
>>> I'm not sure, I remember Ling Shan did some work to not block the
>>> config show in this commit:
>>>
>>> commit a34bed37fc9d3da319bb75dfbf02a7d3e95e12de
>>> Author: Zhu Lingshan <lingshan.zhu@intel.com>
>>> Date: Fri Jul 22 19:53:07 2022 +0800
>>>
>>> vDPA: !FEATURES_OK should not block querying device config space
>>>
>>> We need some changes in the vdpa tool to show device_features
>>> unconditionally in the "dev config show" command.
>>>
>>> That's true, I think I ever pointed it out to Lingshan before, that
>>> it's not needed to bother exposing those config space fields in "dev
>>> config show" output, if the only intent is for live migration of
>>> device features between nodes. For vDPA live migration, what cares
>>> most is those configuration parameters specified on vdpa creation,
>>> and userspace VMM (QEMU) is supposed to take care of saving and
>>> restoring live device states. I think it's easier to extend "vdpa
>>> dev show" output to include device_features and other config params
>>> as well, rather than count on validity of various config space fields.
>> Probably, but for the migration it's more about the ability of the
>> mgmtdev instead of the vDPA device itself I think.
> If picking the appropriate device for migration is what it is
> concerned, it's subject to the capability that mgmtdev offers. That's
> true, for sure.
>
> On the other hand, mgmt software would also need to take care of
> reconstructing the destination device with the same configuration as
> that at the source side. For example, a mgmtdev on source supports
> features A, B, C, D, and destination mgmtdev supports features B, C,
> D, E. When vdpa device on the source is initially created with
> features B and C but without feature D (noted: creation with a subset
> of mgmtdev features was already supported before, and this series just
> makes it more explicit), the mgmt software is supposed to equally
> create a device with features B and C on dest, even though the
> destination may support feature D that the mgmtdev on both sides can
> support. My point is, we should have some flexibility on the mgmt
> software implementation that allows the mgmt software to easily tell
> apart the exact features (i.e. B and C in the above example) and the
> exact configuration a specific vdpa device was originally created
> with, via some simple query command. Having mgmt software to remember
> the vdpa creation args could work, but on the other hand it'd be nice
> to allow lightweight software implementation without having to persist
> the list of vdpa args and make vdpa tool more self-contained.
>
> I will post a patch (series) shortly to demonstrate this idea.
> Basically, there's no actual need to mess around with those config
> space values for live migration. It was not built for that purpose.
Ok, let's see.
>
>>
>>> https://lore.kernel.org/virtualization/454bdf1b-daa1-aa67-2b8c-bc15351c1851@oracle.com/
>>>
>>>
>>> It's not just insufficient, but sometimes is incorrect to create
>>> vDPA device using the config space fields. For instance, MAC
>>> address in config space can be changed temporarily (until device
>>> reset) via ctrl_vq VIRTIO_NET_CTRL_MAC_ADDR_SET command. It's
>>> incorrect to create vDPA using the MAC address shown in the config
>>> space.
>> I think it's still a must for create the mac with the exact mac address:
>>
>> 1) VIRTIO_NET_F_CTRL_MAC is not a must
>> 2) there's no way for us to know whether or not the mac has been changed
> Noted I think here we are still talking about VERSION_1 device which
> is spec conforming. So far as I understand the spec, if the
> VIRTIO_NET_F_CTRL_MAC feature is not negotiated, there's no way for
> driver to change the default MAC address.
For 1.0 device yes.
>
> Even if we want to simulate or support a legacy device model, when MAC
> address is changed by legacy driver somehow, QEMU should be able to
> detect this and issue a vdpa ioctl call to change the MAC address
> filter underneath. I don't see that it ever happens in today's code,
> so I presume the only possibility this may work is that the specific
> vDPA device may have an internal learning bridge that adapts to what
> MAC address the driver actually sends.
This is not true AFAIK. E.g when switchdev is enabled for mlx5 parent.
> In this case, since the device doesn't care, recreate with the MAC in
> use is not needed, and technically it is even incorrect. In data
> centers or cloud environment, MAC address is usually controlled and
> managed by some central entity/service. If a driver can dominate the
> MAC address in use by deliberately overriding the default MAC and
> bypassing the central rule via live migration, that'd be a more severe
> security issue to address in the first place.
There used to be a discussion to allow trust and spoof check as what
SR-IOV did. For safety, we can filter out CTRL_MAC right now. But I
think it's something out of the scope for this discussion.
But I still don't get what's wrong with have the same mac address
provisioned in both src and dst. It is the model used currently (e.g
libvirt will guarantee the same mac in both src and dst). The mgmt
software can then guarantee that the mac was fetched from the
centralized manager. And we can't depend purely on the migration since
in some case it can't work: e.g src MTU 4000 dst MTU 1500, migration
will fail and mgmt stack need to provision an 4000 to work.
>
>> 3) migration code can restore the mac during restore
>>
>> So exactly the same mac address is still required. (This is the same
>> as we are doing for live migration on software virtio)
>>
>>> Another example, if the source vDPA device has MAC address table
>>> size limit of 100, then in the destination we should pick parent
>>> device with size limit no smaller than that, and create vDPA on
>>> remote node matching the exact same size. There's nothing config
>>> space field can assist here.
>> Two ways:
>>
>> 1) mgmtdev should show the mac table size so mgmt layer can provision
>> the mac table size
>> 2) If the mac table exceeds what is supported in the destination, it
>> needs to enable the all uni in this case.
> Yep, so no field in the config space can help with these two
> solutions, right? MAC table size is not showing up there. Whether the
> parent device supports ALLUNI via VIRTIO_NET_F_CTRL_RX is not there,
> either. (showing them in the 'vdpa mgmtdev show' output is the right
> thing IMHO).
>
>>
>>> One example further, in the future, if we are going to introduce
>>> mandatory feature (for e.g. VERSION_1, RING_PACKED) that the device
>>> is unable to support the opposite case, the destination device
>>> should be created with equally same mandatory device features, which
>>> only vDPA creation parameters should matter. While I can't think of
>>> a case that the mgmt software or live migration tool would have to
>>> count on config space fields only.
>> Yes, in this case we need to introduce new netlink attributes for both
>> getting mandatory features from the management device and provisioning
>> those manadating features.
> True, management device level thing again, not related to anything in
> the config space.
>
>>
>>>
>>>
>>>
>>> 1) provision vDPA device with all features that are supported by the
>>> net simulator
>>>
>>> # vdpa dev add name dev1 mgmtdev vdpasim_net
>>> # vdpa dev config show
>>> dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
>>> negotiated_features MTU MAC CTRL_VQ CTRL_MAC_ADDR VERSION_1
>>> ACCESS_PLATFORM
>>>
>>> Maybe not in this patch, but for completeness for the whole series,
>>> could we also add device_features to the output?
>>>
>>> Lingshan, could you please share your thoughts or patch on this?
>>>
>>> Noted here the device_features argument specified during vdpa
>>> creation is introduced by this series itself, it somehow slightly
>>> changed the original semantics of what device_features used to be.
>>>
>>> I'm not sure I get this, we don't support device_features in the past
>>> and it is used to provision device features to the vDPA device which
>>> seems to be fine.
>>>
>>> Before this change, only look at the dev_features in "mgmtdev show"
>>> and remember creation parameters is sufficient to get to all needed
>>> info for creating vDPA at destination.
>> Note that even with the same vendor, mgmtdev may support different
>> features.
>>
>>> After this change, dev_features in "mgmtdev show" becomes less
>>> relevant, as it would need to remember vdpa creation parameters plus
>>> the device_features attribute. While this series allows cross vendor
>>> live migration, it would complicate the implementation of mgmt
>>> software, on the other hand.
>> To allow cross vendor live migration I couldn't find a better way.
> The idea itself is great, I think, though the CLI interface may have
> some space for improvement. For example, user has to supply the
> heximal value consisting of each feature bit, which is a bit
> challenging for normal users who are not super familiar with each
> virtio feature. On the other hand, there could be ambiguity against
> other vdpa create option, e.g. users may do "vdpa dev add name vdpa0
> mgmtdev ... mtu 1500 device_features 0x300020000" (no F_MTU feature
> bit in device_features) that needs special validation in the code.
We can accept e.g XML in the future I think.
>
> How about we follow the CPU flags model or QEMU virtio-net-pci args to
> define property representing each feature bit? I think the current
> convention for each "vdpa dev add" option implies that the
> corresponding feature bit will be enabled once specified in creation.
> Similarly we can introduce additional option representing each feature
> bit, along with a new features_default property denoting the initial
> value for device_feature bits:
>
> # vdpa mgmtdev show
> vdpasim_net:
> supported_classes net
> max_supported_vqs 3
> dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1
> ACCESS_PLATFORM
> # vdpa dev add name dev1 mgmtdev vdpasim_net features_default off \
> csum on guest_csum on mtu 2000 ctrl_vq on
> version1 on access_platform on
> # vdpa dev show
> dev1: type network mgmtdev vdpasim_net vendor_id 0 max_vqs 3
> max_vq_size 256
> features_default off mtu 2000
> device_features CSUM GUEST_CSUM MTU CTRL_VQ VERSION_1 ACCESS_PLATFORM
>
> If the features_default property is left unspecified or with the
> "inherited" value, it would just inherit all of the supported_features
> from mgmtdev (which is already the case of today).
>
> # vdpa dev add name dev1 mgmtdev vdpasim_net features_default inherited
> # vdpa dev show
> dev1: type network mgmtdev vdpasim_net vendor_id 0 max_vqs 3
> max_vq_size 256
> features_default inherited
> device_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1
> ACCESS_PLATFORM
>
> I can definitely help implement this model if you find it fits.
I prefer XML since it could be reused and we may exceed 64bit limitation
in the future. But we can hear from others.
>
>>
>>>
>>>
>>> When simply look at the "vdpa dev config show" output, I cannot really
>>> tell the actual device_features that was used in vdpa creation. For
>>> e.g.
>>> there is a missing feature ANY_LAYOUT from negotiated_features compared
>>> with supported_features in mgmtdev, but the orchestration software
>>> couldn't tell if the vdpa device on destination host should be created
>>> with or without the ANY_LAYOUT feature.
>>>
>>> I think VERSION_1 implies ANY_LAYOUT.
>>>
>>> Right, ANY_LAYOUT is a bad example. A good example might be that, I
>>> knew the parent mgmtdev on migration source node supports
>>> CTRL_MAC_ADDR, but I don't find it in negotiated_features.
>>>
>>> I think we should use the features that we got from "mgmtdev show"
>>> instead of "negotiated features".
>>>
>>> That was how it's supposed to work previously, but with this series,
>>> I think the newly introduced device_features will be needed instead
>>> of the one in "mgmtdev show".
>> Just to clarify, there won't be a device_features in mgmtdev show
>> since it is device specific, each individual device can have its own
>> device features which are subset of what is supported by the mgmtdev.
> Yep.
>>
>>>
>>> On the migration destination node, the parent device does support
>>> all features as the source offers, including CTRL_MAC_ADDR. What
>>> device features you would expect the mgmt software to create
>>> destination vdpa device with, if not otherwise requiring mgmt
>>> software to remember all the arguments on device creation?
>> So the provisioning in the destination should use exactly the same
>> device_feautres as what the vdpa device has in the source. But before
>> this, management layer should guarantee to provision a vDPA device
>> whose device_features can be supported on the destination in order to
>> allow live migration.
> Exactly.
>>
>>> So in this example, we need use "dev_features" so we get exact the
>>> same features after and operation as either src or dst.
>>>
>>> If the device_features vDPA created with at the source doesn't
>>> include CTRL_MAC_ADDR even though parent supports it, then the vDPA
>>> to be created at the destination shouldn't come with CTRL_MAC_ADDR
>>> either, regardless of whether or not CTRL_MAC_ADDR is present in
>>> destination "mgmtdev show".
>>>
>>> However, if just taking look at negotiated_features, some mgmt
>>> software implementations which don't persist the creation parameters
>>> can't get the device features a certain vDPA device at the source
>>> node was created with.
>>>
>>>
>>> SOURCE# vdpa mgmtdev show
>>> vdpasim_net:
>>> supported_classes net
>>> max_supported_vqs 3
>>> dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1
>>> ACCESS_PLATFORM
>>> SOURCE# vdpa dev config show
>>> dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
>>> negotiated_features MTU MAC CTRL_VQ VERSION_1 ACCESS_PLATFORM
>>>
>>> DESTINATION# vdpa mgmtdev show
>>> vdpasim_net:
>>> supported_classes net
>>> max_supported_vqs 3
>>> dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1
>>> ACCESS_PLATFORM
>>>
>>> But it should be sufficient to
>>> use features_src & feature_dst in this case. Actually, it should work
>>> similar as to the cpu flags, the management software should introduce
>>> the concept of cluster which means the maximal set of common features
>>> is calculated and provisioned during device creation to allow
>>> migration among the nodes inside the cluster.
>>>
>>> Yes, this is one way mgmt software may implement, but I am not sure
>>> if it's the only way. For e.g. for cpu flags, mgmt software can
>>> infer the guest cpus features in use from all qemu command line
>>> arguments and host cpu features/capability, which doesn't need to
>>> remember creation arguments and is easy to recover from failure
>>> without having to make the VM config persistent in data store. I
>>> thought it would be great if vdpa CLI design could offer the same.
>>>
>>> One minor difference is that we have cpu model abstraction, so we can
>>> have things like:
>>>
>>> ./qemu-system-x86_64 -cpu EPYC
>>>
>>> Which implies the cpu features/flags where vDPA doesn't have. But
>>> consider it's just a 64bit (or 128 in the future), it doesn't seems to
>>> be too complex for the management to know, we probably need to start
>>> from this and then we can try to introduce some generation/model after
>>> it is agreed on most of the vendors.
>>>
>>> What you refer to is the so-called named model for CPU flags. I
>>> think it's a good addition to have some generation or named model
>>> defined for vDPA. But I don't get the point for how it relates to
>>> exposing the actual value of device features? Are you saying in this
>>> case you'd rather expose the model name than the actual value of
>>> feature bits? Well, I think we can expose both in different fields
>>> when there's really such a need.
>> It's something like:
>>
>> vdpa dev add name dev1 mgmtdev vdpasim_net device_features
>> VDPA_NET_MODEL_1
>>
>> and VDPA_NET_MODEL_1 implies some feature sets.
>
> Not sure if this could be very useful for virtio devices, given we
> don't have a determined set of virtio features unlike CPU
> generation/model, but I think even with the features_default property
> we can still achieve that.
>
> -Siwei
Yes.
Thanks
>
>>
>>> BTW with regard to the cpu model in mgmt software implementation,
>>> the one implemented in libvirt is a mixed "Host model" [1] with
>>> taking advantage of QEMU named model and exposing additional
>>> individual CPU features that gets close to what host CPU offers.
>> So creating vDPA device without "device_features" is somehow the host
>> model, it will have all features that is supported by the parent.
>>
>>> I think this implies that mgmt software should have to understand
>>> what the model name really means in terms of individual CPU
>>> features, so having feature bit value exposed will just do more help
>>> if vDPA goes the same way.
>> Exactly.
>>
>> Thanks
>>
>>>
>>> Regards,
>>> -Siwei
>>>
>>> [1]
>>> https://qemu-project.gitlab.io/qemu/system/qemu-cpu-models.html#two-ways-to-configure-cpu-models-with-qemu-kvm
>>>
>>>
>>> Thanks
>>>
>>> Thanks,
>>> -Siwei
>>>
>>>
>>> Thanks
>>>
>>> Thanks,
>>> -Siwei
>>>
>>>
>>> 2) provision vDPA device with a subset of the features
>>>
>>> # vdpa dev add name dev1 mgmtdev vdpasim_net device_features
>>> 0x300020000
>>> # vdpa dev config show
>>> dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
>>> negotiated_features CTRL_VQ VERSION_1 ACCESS_PLATFORM
>>>
>>> Reviewed-by: Eli Cohen <elic@nvidia.com>
>>> Signed-off-by: Jason Wang <jasowang@redhat.com>
>>> ---
>>> drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 11 ++++++++++-
>>> 1 file changed, 10 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
>>> b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
>>> index 886449e88502..a9ba02be378b 100644
>>> --- a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
>>> +++ b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
>>> @@ -254,6 +254,14 @@ static int vdpasim_net_dev_add(struct
>>> vdpa_mgmt_dev *mdev, const char *name,
>>> dev_attr.work_fn = vdpasim_net_work;
>>> dev_attr.buffer_size = PAGE_SIZE;
>>>
>>> + if (config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) {
>>> + if (config->device_features &
>>> + ~dev_attr.supported_features)
>>> + return -EINVAL;
>>> + dev_attr.supported_features &=
>>> + config->device_features;
>>> + }
>>> +
>>> simdev = vdpasim_create(&dev_attr);
>>> if (IS_ERR(simdev))
>>> return PTR_ERR(simdev);
>>> @@ -294,7 +302,8 @@ static struct vdpa_mgmt_dev mgmt_dev = {
>>> .id_table = id_table,
>>> .ops = &vdpasim_net_mgmtdev_ops,
>>> .config_attr_mask = (1 << VDPA_ATTR_DEV_NET_CFG_MACADDR |
>>> - 1 << VDPA_ATTR_DEV_NET_CFG_MTU),
>>> + 1 << VDPA_ATTR_DEV_NET_CFG_MTU |
>>> + 1 << VDPA_ATTR_DEV_FEATURES),
>>> .max_supported_vqs = VDPASIM_NET_VQ_NUM,
>>> .supported_features = VDPASIM_NET_FEATURES,
>>> };
>>>
>>>
>>>
>
_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
@ 2022-10-13 7:10 ` Jason Wang
0 siblings, 0 replies; 55+ messages in thread
From: Jason Wang @ 2022-10-13 7:10 UTC (permalink / raw)
To: Si-Wei Liu
Cc: mst, Eli Cohen, Parav Pandit, Wu Zongyong, virtualization,
linux-kernel, eperezma, Zhu Lingshan, Gautam Dawar, Cindy Lu,
Yongji Xie
在 2022/10/7 08:35, Si-Wei Liu 写道:
>
>
> On 9/28/2022 9:55 PM, Jason Wang wrote:
>> On Tue, Sep 27, 2022 at 5:41 PM Si-Wei Liu <si-wei.liu@oracle.com>
>> wrote:
>>>
>>>
>>> On 9/26/2022 8:59 PM, Jason Wang wrote:
>>>
>>> On Tue, Sep 27, 2022 at 9:02 AM Si-Wei Liu <si-wei.liu@oracle.com>
>>> wrote:
>>>
>>>
>>> On 9/26/2022 12:11 AM, Jason Wang wrote:
>>>
>>> On Sat, Sep 24, 2022 at 4:01 AM Si-Wei Liu <si-wei.liu@oracle.com>
>>> wrote:
>>>
>>>
>>> On 9/21/2022 7:43 PM, Jason Wang wrote:
>>>
>>> This patch implements features provisioning for vdpa_sim_net.
>>>
>>> 1) validating the provisioned features to be a subset of the parent
>>> features.
>>> 2) clearing the features that is not wanted by the userspace
>>>
>>> For example:
>>>
>>> # vdpa mgmtdev show
>>> vdpasim_net:
>>> supported_classes net
>>> max_supported_vqs 3
>>> dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1
>>> ACCESS_PLATFORM
>>>
>>> Sighs, not to blame any one and it's perhaps too late, but this
>>> "dev_features" attr in "mgmtdev show" command output should have been
>>> called "supported_features" in the first place.
>>>
>>> Not sure I get this, but I guess this is the negotiated features
>>> actually.
>>>
>>> Actually no, that is why I said the name is a bit confusing and
>>> "supported_features" might sound better.
>>>
>>> You're right, it's an mgmtdev show actually.
>>>
>>> This attribute in the parent device (mgmtdev) denotes the real
>>> device capability for what virtio features can be supported by the
>>> parent device. Any unprivileged user can check into this field to
>>> know parent device's capability without having to create a child
>>> vDPA device at all. The features that child vDPA device may support
>>> should be a subset of, or at most up to what the parent device
>>> offers. For e.g. the vdpa device dev1 you created below can expose
>>> less or equal device_features bit than 0x308820028 (MTU MAC CTRL_VQ
>>> CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM), but shouldn't
>>> be no more than what the parent device can actually support.
>>>
>>> Yes, I didn't see anything wrong with "dev_features",
>>>
>>> Yep, it didn't appear to me anything wrong either at first sight,
>>> then I gave my R-b on the series introduced this attribute. But it's
>>> not a perfect name, either, on the other hand. Parav later pointed
>>> out that the corresponding enum definition for this attribute should
>>> follow pre-existing naming convention that we should perhaps do
>>> s/VDPA_ATTR_DEV_SUPPORTED_FEATURES/VDPA_ATTR_MGMTDEV_SUPPORTED_FEATURES/
>>> to get it renamed, as this is a mgmtdev level attribute, which I
>>> agree. Now that with the upcoming "device_features" attribute (vdpa
>>> dev level) from this series, it's subject to another confusions
>>> between these two similar names, but actually would represent things
>>> at different level. While all other attributes in "mgmtdev dev show"
>>> seem to be aligned with the "supported_" prefix, e.g.
>>> supported_classes, max_supported_vqs, from which I think the stance
>>> of device is already implied through "mgmtdev" in the command. For
>>> the perspective of clarify and easy distinction,
>>> "supported_features" seems to be a better name than "dev_features".
>> See another reply, I think I get your point,
>>
>> 1) VDPA_ATTR_VDPA_DEV_SUPPORTED_FEATURES (lingshan's series) and
>> VDPA_ATTR_VDPA_DEV_FEATURES should be equivalent and unified to a
>> single attribute.
>> 2) A better name to "supported_features" should be fine, patches are
>> welcomed
>>
>>> it aligns to the
>>> virtio spec which means the features could be used to create a vdpa
>>> device. But if everyone agree on the renaming, I'm fine.
>>>
>>> Never mind, if it's late don't have to bother.
>>>
>>>
>>>
>>> I think Ling Shan is working on reporting both negotiated features
>>> with the device features.
>>>
>>> Does it imply this series is connected to another work in parallel?
>>> Is it possible to add a reference in the cover letter?
>>>
>>> I'm not sure, I remember Ling Shan did some work to not block the
>>> config show in this commit:
>>>
>>> commit a34bed37fc9d3da319bb75dfbf02a7d3e95e12de
>>> Author: Zhu Lingshan <lingshan.zhu@intel.com>
>>> Date: Fri Jul 22 19:53:07 2022 +0800
>>>
>>> vDPA: !FEATURES_OK should not block querying device config space
>>>
>>> We need some changes in the vdpa tool to show device_features
>>> unconditionally in the "dev config show" command.
>>>
>>> That's true, I think I ever pointed it out to Lingshan before, that
>>> it's not needed to bother exposing those config space fields in "dev
>>> config show" output, if the only intent is for live migration of
>>> device features between nodes. For vDPA live migration, what cares
>>> most is those configuration parameters specified on vdpa creation,
>>> and userspace VMM (QEMU) is supposed to take care of saving and
>>> restoring live device states. I think it's easier to extend "vdpa
>>> dev show" output to include device_features and other config params
>>> as well, rather than count on validity of various config space fields.
>> Probably, but for the migration it's more about the ability of the
>> mgmtdev instead of the vDPA device itself I think.
> If picking the appropriate device for migration is what it is
> concerned, it's subject to the capability that mgmtdev offers. That's
> true, for sure.
>
> On the other hand, mgmt software would also need to take care of
> reconstructing the destination device with the same configuration as
> that at the source side. For example, a mgmtdev on source supports
> features A, B, C, D, and destination mgmtdev supports features B, C,
> D, E. When vdpa device on the source is initially created with
> features B and C but without feature D (noted: creation with a subset
> of mgmtdev features was already supported before, and this series just
> makes it more explicit), the mgmt software is supposed to equally
> create a device with features B and C on dest, even though the
> destination may support feature D that the mgmtdev on both sides can
> support. My point is, we should have some flexibility on the mgmt
> software implementation that allows the mgmt software to easily tell
> apart the exact features (i.e. B and C in the above example) and the
> exact configuration a specific vdpa device was originally created
> with, via some simple query command. Having mgmt software to remember
> the vdpa creation args could work, but on the other hand it'd be nice
> to allow lightweight software implementation without having to persist
> the list of vdpa args and make vdpa tool more self-contained.
>
> I will post a patch (series) shortly to demonstrate this idea.
> Basically, there's no actual need to mess around with those config
> space values for live migration. It was not built for that purpose.
Ok, let's see.
>
>>
>>> https://lore.kernel.org/virtualization/454bdf1b-daa1-aa67-2b8c-bc15351c1851@oracle.com/
>>>
>>>
>>> It's not just insufficient, but sometimes is incorrect to create
>>> vDPA device using the config space fields. For instance, MAC
>>> address in config space can be changed temporarily (until device
>>> reset) via ctrl_vq VIRTIO_NET_CTRL_MAC_ADDR_SET command. It's
>>> incorrect to create vDPA using the MAC address shown in the config
>>> space.
>> I think it's still a must for create the mac with the exact mac address:
>>
>> 1) VIRTIO_NET_F_CTRL_MAC is not a must
>> 2) there's no way for us to know whether or not the mac has been changed
> Noted I think here we are still talking about VERSION_1 device which
> is spec conforming. So far as I understand the spec, if the
> VIRTIO_NET_F_CTRL_MAC feature is not negotiated, there's no way for
> driver to change the default MAC address.
For 1.0 device yes.
>
> Even if we want to simulate or support a legacy device model, when MAC
> address is changed by legacy driver somehow, QEMU should be able to
> detect this and issue a vdpa ioctl call to change the MAC address
> filter underneath. I don't see that it ever happens in today's code,
> so I presume the only possibility this may work is that the specific
> vDPA device may have an internal learning bridge that adapts to what
> MAC address the driver actually sends.
This is not true AFAIK. E.g when switchdev is enabled for mlx5 parent.
> In this case, since the device doesn't care, recreate with the MAC in
> use is not needed, and technically it is even incorrect. In data
> centers or cloud environment, MAC address is usually controlled and
> managed by some central entity/service. If a driver can dominate the
> MAC address in use by deliberately overriding the default MAC and
> bypassing the central rule via live migration, that'd be a more severe
> security issue to address in the first place.
There used to be a discussion to allow trust and spoof check as what
SR-IOV did. For safety, we can filter out CTRL_MAC right now. But I
think it's something out of the scope for this discussion.
But I still don't get what's wrong with have the same mac address
provisioned in both src and dst. It is the model used currently (e.g
libvirt will guarantee the same mac in both src and dst). The mgmt
software can then guarantee that the mac was fetched from the
centralized manager. And we can't depend purely on the migration since
in some case it can't work: e.g src MTU 4000 dst MTU 1500, migration
will fail and mgmt stack need to provision an 4000 to work.
>
>> 3) migration code can restore the mac during restore
>>
>> So exactly the same mac address is still required. (This is the same
>> as we are doing for live migration on software virtio)
>>
>>> Another example, if the source vDPA device has MAC address table
>>> size limit of 100, then in the destination we should pick parent
>>> device with size limit no smaller than that, and create vDPA on
>>> remote node matching the exact same size. There's nothing config
>>> space field can assist here.
>> Two ways:
>>
>> 1) mgmtdev should show the mac table size so mgmt layer can provision
>> the mac table size
>> 2) If the mac table exceeds what is supported in the destination, it
>> needs to enable the all uni in this case.
> Yep, so no field in the config space can help with these two
> solutions, right? MAC table size is not showing up there. Whether the
> parent device supports ALLUNI via VIRTIO_NET_F_CTRL_RX is not there,
> either. (showing them in the 'vdpa mgmtdev show' output is the right
> thing IMHO).
>
>>
>>> One example further, in the future, if we are going to introduce
>>> mandatory feature (for e.g. VERSION_1, RING_PACKED) that the device
>>> is unable to support the opposite case, the destination device
>>> should be created with equally same mandatory device features, which
>>> only vDPA creation parameters should matter. While I can't think of
>>> a case that the mgmt software or live migration tool would have to
>>> count on config space fields only.
>> Yes, in this case we need to introduce new netlink attributes for both
>> getting mandatory features from the management device and provisioning
>> those manadating features.
> True, management device level thing again, not related to anything in
> the config space.
>
>>
>>>
>>>
>>>
>>> 1) provision vDPA device with all features that are supported by the
>>> net simulator
>>>
>>> # vdpa dev add name dev1 mgmtdev vdpasim_net
>>> # vdpa dev config show
>>> dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
>>> negotiated_features MTU MAC CTRL_VQ CTRL_MAC_ADDR VERSION_1
>>> ACCESS_PLATFORM
>>>
>>> Maybe not in this patch, but for completeness for the whole series,
>>> could we also add device_features to the output?
>>>
>>> Lingshan, could you please share your thoughts or patch on this?
>>>
>>> Noted here the device_features argument specified during vdpa
>>> creation is introduced by this series itself, it somehow slightly
>>> changed the original semantics of what device_features used to be.
>>>
>>> I'm not sure I get this, we don't support device_features in the past
>>> and it is used to provision device features to the vDPA device which
>>> seems to be fine.
>>>
>>> Before this change, only look at the dev_features in "mgmtdev show"
>>> and remember creation parameters is sufficient to get to all needed
>>> info for creating vDPA at destination.
>> Note that even with the same vendor, mgmtdev may support different
>> features.
>>
>>> After this change, dev_features in "mgmtdev show" becomes less
>>> relevant, as it would need to remember vdpa creation parameters plus
>>> the device_features attribute. While this series allows cross vendor
>>> live migration, it would complicate the implementation of mgmt
>>> software, on the other hand.
>> To allow cross vendor live migration I couldn't find a better way.
> The idea itself is great, I think, though the CLI interface may have
> some space for improvement. For example, user has to supply the
> heximal value consisting of each feature bit, which is a bit
> challenging for normal users who are not super familiar with each
> virtio feature. On the other hand, there could be ambiguity against
> other vdpa create option, e.g. users may do "vdpa dev add name vdpa0
> mgmtdev ... mtu 1500 device_features 0x300020000" (no F_MTU feature
> bit in device_features) that needs special validation in the code.
We can accept e.g XML in the future I think.
>
> How about we follow the CPU flags model or QEMU virtio-net-pci args to
> define property representing each feature bit? I think the current
> convention for each "vdpa dev add" option implies that the
> corresponding feature bit will be enabled once specified in creation.
> Similarly we can introduce additional option representing each feature
> bit, along with a new features_default property denoting the initial
> value for device_feature bits:
>
> # vdpa mgmtdev show
> vdpasim_net:
> supported_classes net
> max_supported_vqs 3
> dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1
> ACCESS_PLATFORM
> # vdpa dev add name dev1 mgmtdev vdpasim_net features_default off \
> csum on guest_csum on mtu 2000 ctrl_vq on
> version1 on access_platform on
> # vdpa dev show
> dev1: type network mgmtdev vdpasim_net vendor_id 0 max_vqs 3
> max_vq_size 256
> features_default off mtu 2000
> device_features CSUM GUEST_CSUM MTU CTRL_VQ VERSION_1 ACCESS_PLATFORM
>
> If the features_default property is left unspecified or with the
> "inherited" value, it would just inherit all of the supported_features
> from mgmtdev (which is already the case of today).
>
> # vdpa dev add name dev1 mgmtdev vdpasim_net features_default inherited
> # vdpa dev show
> dev1: type network mgmtdev vdpasim_net vendor_id 0 max_vqs 3
> max_vq_size 256
> features_default inherited
> device_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1
> ACCESS_PLATFORM
>
> I can definitely help implement this model if you find it fits.
I prefer XML since it could be reused and we may exceed 64bit limitation
in the future. But we can hear from others.
>
>>
>>>
>>>
>>> When simply look at the "vdpa dev config show" output, I cannot really
>>> tell the actual device_features that was used in vdpa creation. For
>>> e.g.
>>> there is a missing feature ANY_LAYOUT from negotiated_features compared
>>> with supported_features in mgmtdev, but the orchestration software
>>> couldn't tell if the vdpa device on destination host should be created
>>> with or without the ANY_LAYOUT feature.
>>>
>>> I think VERSION_1 implies ANY_LAYOUT.
>>>
>>> Right, ANY_LAYOUT is a bad example. A good example might be that, I
>>> knew the parent mgmtdev on migration source node supports
>>> CTRL_MAC_ADDR, but I don't find it in negotiated_features.
>>>
>>> I think we should use the features that we got from "mgmtdev show"
>>> instead of "negotiated features".
>>>
>>> That was how it's supposed to work previously, but with this series,
>>> I think the newly introduced device_features will be needed instead
>>> of the one in "mgmtdev show".
>> Just to clarify, there won't be a device_features in mgmtdev show
>> since it is device specific, each individual device can have its own
>> device features which are subset of what is supported by the mgmtdev.
> Yep.
>>
>>>
>>> On the migration destination node, the parent device does support
>>> all features as the source offers, including CTRL_MAC_ADDR. What
>>> device features you would expect the mgmt software to create
>>> destination vdpa device with, if not otherwise requiring mgmt
>>> software to remember all the arguments on device creation?
>> So the provisioning in the destination should use exactly the same
>> device_feautres as what the vdpa device has in the source. But before
>> this, management layer should guarantee to provision a vDPA device
>> whose device_features can be supported on the destination in order to
>> allow live migration.
> Exactly.
>>
>>> So in this example, we need use "dev_features" so we get exact the
>>> same features after and operation as either src or dst.
>>>
>>> If the device_features vDPA created with at the source doesn't
>>> include CTRL_MAC_ADDR even though parent supports it, then the vDPA
>>> to be created at the destination shouldn't come with CTRL_MAC_ADDR
>>> either, regardless of whether or not CTRL_MAC_ADDR is present in
>>> destination "mgmtdev show".
>>>
>>> However, if just taking look at negotiated_features, some mgmt
>>> software implementations which don't persist the creation parameters
>>> can't get the device features a certain vDPA device at the source
>>> node was created with.
>>>
>>>
>>> SOURCE# vdpa mgmtdev show
>>> vdpasim_net:
>>> supported_classes net
>>> max_supported_vqs 3
>>> dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1
>>> ACCESS_PLATFORM
>>> SOURCE# vdpa dev config show
>>> dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
>>> negotiated_features MTU MAC CTRL_VQ VERSION_1 ACCESS_PLATFORM
>>>
>>> DESTINATION# vdpa mgmtdev show
>>> vdpasim_net:
>>> supported_classes net
>>> max_supported_vqs 3
>>> dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1
>>> ACCESS_PLATFORM
>>>
>>> But it should be sufficient to
>>> use features_src & feature_dst in this case. Actually, it should work
>>> similar as to the cpu flags, the management software should introduce
>>> the concept of cluster which means the maximal set of common features
>>> is calculated and provisioned during device creation to allow
>>> migration among the nodes inside the cluster.
>>>
>>> Yes, this is one way mgmt software may implement, but I am not sure
>>> if it's the only way. For e.g. for cpu flags, mgmt software can
>>> infer the guest cpus features in use from all qemu command line
>>> arguments and host cpu features/capability, which doesn't need to
>>> remember creation arguments and is easy to recover from failure
>>> without having to make the VM config persistent in data store. I
>>> thought it would be great if vdpa CLI design could offer the same.
>>>
>>> One minor difference is that we have cpu model abstraction, so we can
>>> have things like:
>>>
>>> ./qemu-system-x86_64 -cpu EPYC
>>>
>>> Which implies the cpu features/flags where vDPA doesn't have. But
>>> consider it's just a 64bit (or 128 in the future), it doesn't seems to
>>> be too complex for the management to know, we probably need to start
>>> from this and then we can try to introduce some generation/model after
>>> it is agreed on most of the vendors.
>>>
>>> What you refer to is the so-called named model for CPU flags. I
>>> think it's a good addition to have some generation or named model
>>> defined for vDPA. But I don't get the point for how it relates to
>>> exposing the actual value of device features? Are you saying in this
>>> case you'd rather expose the model name than the actual value of
>>> feature bits? Well, I think we can expose both in different fields
>>> when there's really such a need.
>> It's something like:
>>
>> vdpa dev add name dev1 mgmtdev vdpasim_net device_features
>> VDPA_NET_MODEL_1
>>
>> and VDPA_NET_MODEL_1 implies some feature sets.
>
> Not sure if this could be very useful for virtio devices, given we
> don't have a determined set of virtio features unlike CPU
> generation/model, but I think even with the features_default property
> we can still achieve that.
>
> -Siwei
Yes.
Thanks
>
>>
>>> BTW with regard to the cpu model in mgmt software implementation,
>>> the one implemented in libvirt is a mixed "Host model" [1] with
>>> taking advantage of QEMU named model and exposing additional
>>> individual CPU features that gets close to what host CPU offers.
>> So creating vDPA device without "device_features" is somehow the host
>> model, it will have all features that is supported by the parent.
>>
>>> I think this implies that mgmt software should have to understand
>>> what the model name really means in terms of individual CPU
>>> features, so having feature bit value exposed will just do more help
>>> if vDPA goes the same way.
>> Exactly.
>>
>> Thanks
>>
>>>
>>> Regards,
>>> -Siwei
>>>
>>> [1]
>>> https://qemu-project.gitlab.io/qemu/system/qemu-cpu-models.html#two-ways-to-configure-cpu-models-with-qemu-kvm
>>>
>>>
>>> Thanks
>>>
>>> Thanks,
>>> -Siwei
>>>
>>>
>>> Thanks
>>>
>>> Thanks,
>>> -Siwei
>>>
>>>
>>> 2) provision vDPA device with a subset of the features
>>>
>>> # vdpa dev add name dev1 mgmtdev vdpasim_net device_features
>>> 0x300020000
>>> # vdpa dev config show
>>> dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
>>> negotiated_features CTRL_VQ VERSION_1 ACCESS_PLATFORM
>>>
>>> Reviewed-by: Eli Cohen <elic@nvidia.com>
>>> Signed-off-by: Jason Wang <jasowang@redhat.com>
>>> ---
>>> drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 11 ++++++++++-
>>> 1 file changed, 10 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
>>> b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
>>> index 886449e88502..a9ba02be378b 100644
>>> --- a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
>>> +++ b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
>>> @@ -254,6 +254,14 @@ static int vdpasim_net_dev_add(struct
>>> vdpa_mgmt_dev *mdev, const char *name,
>>> dev_attr.work_fn = vdpasim_net_work;
>>> dev_attr.buffer_size = PAGE_SIZE;
>>>
>>> + if (config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) {
>>> + if (config->device_features &
>>> + ~dev_attr.supported_features)
>>> + return -EINVAL;
>>> + dev_attr.supported_features &=
>>> + config->device_features;
>>> + }
>>> +
>>> simdev = vdpasim_create(&dev_attr);
>>> if (IS_ERR(simdev))
>>> return PTR_ERR(simdev);
>>> @@ -294,7 +302,8 @@ static struct vdpa_mgmt_dev mgmt_dev = {
>>> .id_table = id_table,
>>> .ops = &vdpasim_net_mgmtdev_ops,
>>> .config_attr_mask = (1 << VDPA_ATTR_DEV_NET_CFG_MACADDR |
>>> - 1 << VDPA_ATTR_DEV_NET_CFG_MTU),
>>> + 1 << VDPA_ATTR_DEV_NET_CFG_MTU |
>>> + 1 << VDPA_ATTR_DEV_FEATURES),
>>> .max_supported_vqs = VDPASIM_NET_VQ_NUM,
>>> .supported_features = VDPASIM_NET_FEATURES,
>>> };
>>>
>>>
>>>
>
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
2022-10-13 7:10 ` Jason Wang
(?)
@ 2022-10-17 18:43 ` Si-Wei Liu
2022-10-18 7:45 ` Jason Wang
-1 siblings, 1 reply; 55+ messages in thread
From: Si-Wei Liu @ 2022-10-17 18:43 UTC (permalink / raw)
To: Jason Wang
Cc: Cindy Lu, mst, Yongji Xie, linux-kernel, Gautam Dawar,
virtualization, eperezma, Wu Zongyong, Eli Cohen, Zhu Lingshan
[-- Attachment #1.1: Type: text/plain, Size: 27680 bytes --]
On 10/13/2022 12:10 AM, Jason Wang wrote:
>
> 在 2022/10/7 08:35, Si-Wei Liu 写道:
>>
>>
>> On 9/28/2022 9:55 PM, Jason Wang wrote:
>>> On Tue, Sep 27, 2022 at 5:41 PM Si-Wei Liu <si-wei.liu@oracle.com>
>>> wrote:
>>>>
>>>>
>>>> On 9/26/2022 8:59 PM, Jason Wang wrote:
>>>>
>>>> On Tue, Sep 27, 2022 at 9:02 AM Si-Wei Liu <si-wei.liu@oracle.com>
>>>> wrote:
>>>>
>>>>
>>>> On 9/26/2022 12:11 AM, Jason Wang wrote:
>>>>
>>>> On Sat, Sep 24, 2022 at 4:01 AM Si-Wei Liu <si-wei.liu@oracle.com>
>>>> wrote:
>>>>
>>>>
>>>> On 9/21/2022 7:43 PM, Jason Wang wrote:
>>>>
>>>> This patch implements features provisioning for vdpa_sim_net.
>>>>
>>>> 1) validating the provisioned features to be a subset of the parent
>>>> features.
>>>> 2) clearing the features that is not wanted by the userspace
>>>>
>>>> For example:
>>>>
>>>> # vdpa mgmtdev show
>>>> vdpasim_net:
>>>> supported_classes net
>>>> max_supported_vqs 3
>>>> dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1
>>>> ACCESS_PLATFORM
>>>>
>>>> Sighs, not to blame any one and it's perhaps too late, but this
>>>> "dev_features" attr in "mgmtdev show" command output should have been
>>>> called "supported_features" in the first place.
>>>>
>>>> Not sure I get this, but I guess this is the negotiated features
>>>> actually.
>>>>
>>>> Actually no, that is why I said the name is a bit confusing and
>>>> "supported_features" might sound better.
>>>>
>>>> You're right, it's an mgmtdev show actually.
>>>>
>>>> This attribute in the parent device (mgmtdev) denotes the real
>>>> device capability for what virtio features can be supported by the
>>>> parent device. Any unprivileged user can check into this field to
>>>> know parent device's capability without having to create a child
>>>> vDPA device at all. The features that child vDPA device may support
>>>> should be a subset of, or at most up to what the parent device
>>>> offers. For e.g. the vdpa device dev1 you created below can expose
>>>> less or equal device_features bit than 0x308820028 (MTU MAC CTRL_VQ
>>>> CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM), but shouldn't
>>>> be no more than what the parent device can actually support.
>>>>
>>>> Yes, I didn't see anything wrong with "dev_features",
>>>>
>>>> Yep, it didn't appear to me anything wrong either at first sight,
>>>> then I gave my R-b on the series introduced this attribute. But
>>>> it's not a perfect name, either, on the other hand. Parav later
>>>> pointed out that the corresponding enum definition for this
>>>> attribute should follow pre-existing naming convention that we
>>>> should perhaps do
>>>> s/VDPA_ATTR_DEV_SUPPORTED_FEATURES/VDPA_ATTR_MGMTDEV_SUPPORTED_FEATURES/
>>>> to get it renamed, as this is a mgmtdev level attribute, which I
>>>> agree. Now that with the upcoming "device_features" attribute (vdpa
>>>> dev level) from this series, it's subject to another confusions
>>>> between these two similar names, but actually would represent
>>>> things at different level. While all other attributes in "mgmtdev
>>>> dev show" seem to be aligned with the "supported_" prefix, e.g.
>>>> supported_classes, max_supported_vqs, from which I think the stance
>>>> of device is already implied through "mgmtdev" in the command. For
>>>> the perspective of clarify and easy distinction,
>>>> "supported_features" seems to be a better name than "dev_features".
>>> See another reply, I think I get your point,
>>>
>>> 1) VDPA_ATTR_VDPA_DEV_SUPPORTED_FEATURES (lingshan's series) and
>>> VDPA_ATTR_VDPA_DEV_FEATURES should be equivalent and unified to a
>>> single attribute.
>>> 2) A better name to "supported_features" should be fine, patches are
>>> welcomed
>>>
>>>> it aligns to the
>>>> virtio spec which means the features could be used to create a vdpa
>>>> device. But if everyone agree on the renaming, I'm fine.
>>>>
>>>> Never mind, if it's late don't have to bother.
>>>>
>>>>
>>>>
>>>> I think Ling Shan is working on reporting both negotiated features
>>>> with the device features.
>>>>
>>>> Does it imply this series is connected to another work in parallel?
>>>> Is it possible to add a reference in the cover letter?
>>>>
>>>> I'm not sure, I remember Ling Shan did some work to not block the
>>>> config show in this commit:
>>>>
>>>> commit a34bed37fc9d3da319bb75dfbf02a7d3e95e12de
>>>> Author: Zhu Lingshan <lingshan.zhu@intel.com>
>>>> Date: Fri Jul 22 19:53:07 2022 +0800
>>>>
>>>> vDPA: !FEATURES_OK should not block querying device config space
>>>>
>>>> We need some changes in the vdpa tool to show device_features
>>>> unconditionally in the "dev config show" command.
>>>>
>>>> That's true, I think I ever pointed it out to Lingshan before, that
>>>> it's not needed to bother exposing those config space fields in
>>>> "dev config show" output, if the only intent is for live migration
>>>> of device features between nodes. For vDPA live migration, what
>>>> cares most is those configuration parameters specified on vdpa
>>>> creation, and userspace VMM (QEMU) is supposed to take care of
>>>> saving and restoring live device states. I think it's easier to
>>>> extend "vdpa dev show" output to include device_features and other
>>>> config params as well, rather than count on validity of various
>>>> config space fields.
>>> Probably, but for the migration it's more about the ability of the
>>> mgmtdev instead of the vDPA device itself I think.
>> If picking the appropriate device for migration is what it is
>> concerned, it's subject to the capability that mgmtdev offers. That's
>> true, for sure.
>>
>> On the other hand, mgmt software would also need to take care of
>> reconstructing the destination device with the same configuration as
>> that at the source side. For example, a mgmtdev on source supports
>> features A, B, C, D, and destination mgmtdev supports features B, C,
>> D, E. When vdpa device on the source is initially created with
>> features B and C but without feature D (noted: creation with a subset
>> of mgmtdev features was already supported before, and this series
>> just makes it more explicit), the mgmt software is supposed to
>> equally create a device with features B and C on dest, even though
>> the destination may support feature D that the mgmtdev on both sides
>> can support. My point is, we should have some flexibility on the mgmt
>> software implementation that allows the mgmt software to easily tell
>> apart the exact features (i.e. B and C in the above example) and the
>> exact configuration a specific vdpa device was originally created
>> with, via some simple query command. Having mgmt software to remember
>> the vdpa creation args could work, but on the other hand it'd be nice
>> to allow lightweight software implementation without having to
>> persist the list of vdpa args and make vdpa tool more self-contained.
>>
>> I will post a patch (series) shortly to demonstrate this idea.
>> Basically, there's no actual need to mess around with those config
>> space values for live migration. It was not built for that purpose.
>
>
> Ok, let's see.
>
>
>>
>>>
>>>> https://lore.kernel.org/virtualization/454bdf1b-daa1-aa67-2b8c-bc15351c1851@oracle.com/
>>>>
>>>>
>>>> It's not just insufficient, but sometimes is incorrect to create
>>>> vDPA device using the config space fields. For instance, MAC
>>>> address in config space can be changed temporarily (until device
>>>> reset) via ctrl_vq VIRTIO_NET_CTRL_MAC_ADDR_SET command. It's
>>>> incorrect to create vDPA using the MAC address shown in the config
>>>> space.
>>> I think it's still a must for create the mac with the exact mac
>>> address:
>>>
>>> 1) VIRTIO_NET_F_CTRL_MAC is not a must
>>> 2) there's no way for us to know whether or not the mac has been
>>> changed
>> Noted I think here we are still talking about VERSION_1 device which
>> is spec conforming. So far as I understand the spec, if the
>> VIRTIO_NET_F_CTRL_MAC feature is not negotiated, there's no way for
>> driver to change the default MAC address.
>
>
> For 1.0 device yes.
>
>
>>
>> Even if we want to simulate or support a legacy device model, when
>> MAC address is changed by legacy driver somehow, QEMU should be able
>> to detect this and issue a vdpa ioctl call to change the MAC address
>> filter underneath. I don't see that it ever happens in today's code,
>> so I presume the only possibility this may work is that the specific
>> vDPA device may have an internal learning bridge that adapts to what
>> MAC address the driver actually sends.
>
>
> This is not true AFAIK. E.g when switchdev is enabled for mlx5 parent.
Hmmm, I guess you mean switchdev mode with external learning bridge
software e.g. Open vSwitch? It's conceptionally the same with device
internal learning bridge, no?
OK, though the point was that QEMU should anyway notify the backend of
the mac address change for vDPA driver to apply the new MAC filter,
similar to the way how CTRL_MAC ctrl_vq command is doing. It should not
blindly assume that the every vDPA hardware may have underlying learning
bridge construct, being internal or external. Basically it's not a
universal assumption on the existence of learning bridge, this won't
work for any other vDPA NIC without switchdev or learning bridge.
>
>
>> In this case, since the device doesn't care, recreate with the MAC in
>> use is not needed, and technically it is even incorrect. In data
>> centers or cloud environment, MAC address is usually controlled and
>> managed by some central entity/service. If a driver can dominate the
>> MAC address in use by deliberately overriding the default MAC and
>> bypassing the central rule via live migration, that'd be a more
>> severe security issue to address in the first place.
>
>
> There used to be a discussion to allow trust and spoof check as what
> SR-IOV did. For safety, we can filter out CTRL_MAC right now. But I
> think it's something out of the scope for this discussion.
Sorry I don't get what you mean here, but I guess we may talk about
different thing here (it seems you talked about trusted model that
allows any MAC address, but it's orthogonal to programming MAC address
filter to the underlying hardware as far as I understand).
>
> But I still don't get what's wrong with have the same mac address
> provisioned in both src and dst.
It looks like we may have misunderstood each other - that's exactly the
point I want to make. The persistent mac address provisioned in dst by
the mgmt software should stay the same with that on src, which is the
default mac address rather than whatever other (temporary) mac address
the VM might be using at the time of migration switchover at the source.
> It is the model used currently (e.g libvirt will guarantee the same
> mac in both src and dst). The mgmt software can then guarantee that
> the mac was fetched from the centralized manager.
Right, this is exactly the way our mgmt software works.
> And we can't depend purely on the migration since in some case it
> can't work: e.g src MTU 4000 dst MTU 1500, migration will fail and
> mgmt stack need to provision an 4000 to work.
This seems like a bug of libvirt. For our case, we strictly prohibit
unequal MTU on src & dst to work. Even migrating from MTU 1500 to 4000,
it effectively changes the underlying behavior for packet dropping and
network setup at which maximum size the packet should be allowed when
entering the VM.
>
>
>>
>>> 3) migration code can restore the mac during restore
>>>
>>> So exactly the same mac address is still required. (This is the same
>>> as we are doing for live migration on software virtio)
>>>
>>>> Another example, if the source vDPA device has MAC address table
>>>> size limit of 100, then in the destination we should pick parent
>>>> device with size limit no smaller than that, and create vDPA on
>>>> remote node matching the exact same size. There's nothing config
>>>> space field can assist here.
>>> Two ways:
>>>
>>> 1) mgmtdev should show the mac table size so mgmt layer can provision
>>> the mac table size
>>> 2) If the mac table exceeds what is supported in the destination, it
>>> needs to enable the all uni in this case.
>> Yep, so no field in the config space can help with these two
>> solutions, right? MAC table size is not showing up there. Whether the
>> parent device supports ALLUNI via VIRTIO_NET_F_CTRL_RX is not there,
>> either. (showing them in the 'vdpa mgmtdev show' output is the right
>> thing IMHO).
>>
>>>
>>>> One example further, in the future, if we are going to introduce
>>>> mandatory feature (for e.g. VERSION_1, RING_PACKED) that the device
>>>> is unable to support the opposite case, the destination device
>>>> should be created with equally same mandatory device features,
>>>> which only vDPA creation parameters should matter. While I can't
>>>> think of a case that the mgmt software or live migration tool would
>>>> have to count on config space fields only.
>>> Yes, in this case we need to introduce new netlink attributes for both
>>> getting mandatory features from the management device and provisioning
>>> those manadating features.
>> True, management device level thing again, not related to anything in
>> the config space.
>>
>>>
>>>>
>>>>
>>>>
>>>> 1) provision vDPA device with all features that are supported by the
>>>> net simulator
>>>>
>>>> # vdpa dev add name dev1 mgmtdev vdpasim_net
>>>> # vdpa dev config show
>>>> dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
>>>> negotiated_features MTU MAC CTRL_VQ CTRL_MAC_ADDR VERSION_1
>>>> ACCESS_PLATFORM
>>>>
>>>> Maybe not in this patch, but for completeness for the whole series,
>>>> could we also add device_features to the output?
>>>>
>>>> Lingshan, could you please share your thoughts or patch on this?
>>>>
>>>> Noted here the device_features argument specified during vdpa
>>>> creation is introduced by this series itself, it somehow slightly
>>>> changed the original semantics of what device_features used to be.
>>>>
>>>> I'm not sure I get this, we don't support device_features in the past
>>>> and it is used to provision device features to the vDPA device which
>>>> seems to be fine.
>>>>
>>>> Before this change, only look at the dev_features in "mgmtdev show"
>>>> and remember creation parameters is sufficient to get to all needed
>>>> info for creating vDPA at destination.
>>> Note that even with the same vendor, mgmtdev may support different
>>> features.
>>>
>>>> After this change, dev_features in "mgmtdev show" becomes less
>>>> relevant, as it would need to remember vdpa creation parameters
>>>> plus the device_features attribute. While this series allows cross
>>>> vendor live migration, it would complicate the implementation of
>>>> mgmt software, on the other hand.
>>> To allow cross vendor live migration I couldn't find a better way.
>> The idea itself is great, I think, though the CLI interface may have
>> some space for improvement. For example, user has to supply the
>> heximal value consisting of each feature bit, which is a bit
>> challenging for normal users who are not super familiar with each
>> virtio feature. On the other hand, there could be ambiguity against
>> other vdpa create option, e.g. users may do "vdpa dev add name vdpa0
>> mgmtdev ... mtu 1500 device_features 0x300020000" (no F_MTU feature
>> bit in device_features) that needs special validation in the code.
>
>
> We can accept e.g XML in the future I think.
Regardless of XML being a good interface or not for end users, but I
don't see how it relates to the issue here i.e. conflict/ambiguity or
extra validation in the (kernel) code.
>
>
>>
>> How about we follow the CPU flags model or QEMU virtio-net-pci args
>> to define property representing each feature bit? I think the current
>> convention for each "vdpa dev add" option implies that the
>> corresponding feature bit will be enabled once specified in creation.
>> Similarly we can introduce additional option representing each
>> feature bit, along with a new features_default property denoting the
>> initial value for device_feature bits:
>>
>> # vdpa mgmtdev show
>> vdpasim_net:
>> supported_classes net
>> max_supported_vqs 3
>> dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1
>> ACCESS_PLATFORM
>> # vdpa dev add name dev1 mgmtdev vdpasim_net features_default off \
>> csum on guest_csum on mtu 2000 ctrl_vq on
>> version1 on access_platform on
>> # vdpa dev show
>> dev1: type network mgmtdev vdpasim_net vendor_id 0 max_vqs 3
>> max_vq_size 256
>> features_default off mtu 2000
>> device_features CSUM GUEST_CSUM MTU CTRL_VQ VERSION_1 ACCESS_PLATFORM
>>
>> If the features_default property is left unspecified or with the
>> "inherited" value, it would just inherit all of the
>> supported_features from mgmtdev (which is already the case of today).
>>
>> # vdpa dev add name dev1 mgmtdev vdpasim_net features_default inherited
>> # vdpa dev show
>> dev1: type network mgmtdev vdpasim_net vendor_id 0 max_vqs 3
>> max_vq_size 256
>> features_default inherited
>> device_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1
>> ACCESS_PLATFORM
>>
>> I can definitely help implement this model if you find it fits.
>
>
> I prefer XML since it could be reused and we may exceed 64bit
> limitation in the future. But we can hear from others.
I don't see how this can be re-used by QEMU as QMP is not
taking/exporting XML. Are we talking about libvirt here, which happens
to be one amongst many others? My personal feeling is that not quite a
lot of human end users (rather than management software or script) today
would prefer using XML. Instead, like any other iproute utility, json
seems to a more popular interface for script and mgmt software to
consume, which vdpa tool supports natively already.
I think basically we can support two set of CLI interfaces, one friendly
enough for human users, and another scriptable and parseable by
management software users. IMO for now we should start to focus on the
human oriented CLI design first. Whether XML v.s. json being an ideal
interface for managment software would be another discussion that would
need more inputs from the broader range of extended community, which is
not worth distracting from.
>
>>
>>>
>>>>
>>>>
>>>> When simply look at the "vdpa dev config show" output, I cannot really
>>>> tell the actual device_features that was used in vdpa creation. For
>>>> e.g.
>>>> there is a missing feature ANY_LAYOUT from negotiated_features
>>>> compared
>>>> with supported_features in mgmtdev, but the orchestration software
>>>> couldn't tell if the vdpa device on destination host should be created
>>>> with or without the ANY_LAYOUT feature.
>>>>
>>>> I think VERSION_1 implies ANY_LAYOUT.
>>>>
>>>> Right, ANY_LAYOUT is a bad example. A good example might be that, I
>>>> knew the parent mgmtdev on migration source node supports
>>>> CTRL_MAC_ADDR, but I don't find it in negotiated_features.
>>>>
>>>> I think we should use the features that we got from "mgmtdev show"
>>>> instead of "negotiated features".
>>>>
>>>> That was how it's supposed to work previously, but with this
>>>> series, I think the newly introduced device_features will be needed
>>>> instead of the one in "mgmtdev show".
>>> Just to clarify, there won't be a device_features in mgmtdev show
>>> since it is device specific, each individual device can have its own
>>> device features which are subset of what is supported by the mgmtdev.
>> Yep.
>>>
>>>>
>>>> On the migration destination node, the parent device does support
>>>> all features as the source offers, including CTRL_MAC_ADDR. What
>>>> device features you would expect the mgmt software to create
>>>> destination vdpa device with, if not otherwise requiring mgmt
>>>> software to remember all the arguments on device creation?
>>> So the provisioning in the destination should use exactly the same
>>> device_feautres as what the vdpa device has in the source. But before
>>> this, management layer should guarantee to provision a vDPA device
>>> whose device_features can be supported on the destination in order to
>>> allow live migration.
>> Exactly.
>>>
>>>> So in this example, we need use "dev_features" so we get exact the
>>>> same features after and operation as either src or dst.
>>>>
>>>> If the device_features vDPA created with at the source doesn't
>>>> include CTRL_MAC_ADDR even though parent supports it, then the vDPA
>>>> to be created at the destination shouldn't come with CTRL_MAC_ADDR
>>>> either, regardless of whether or not CTRL_MAC_ADDR is present in
>>>> destination "mgmtdev show".
>>>>
>>>> However, if just taking look at negotiated_features, some mgmt
>>>> software implementations which don't persist the creation
>>>> parameters can't get the device features a certain vDPA device at
>>>> the source node was created with.
>>>>
>>>>
>>>> SOURCE# vdpa mgmtdev show
>>>> vdpasim_net:
>>>> supported_classes net
>>>> max_supported_vqs 3
>>>> dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1
>>>> ACCESS_PLATFORM
>>>> SOURCE# vdpa dev config show
>>>> dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
>>>> negotiated_features MTU MAC CTRL_VQ VERSION_1 ACCESS_PLATFORM
>>>>
>>>> DESTINATION# vdpa mgmtdev show
>>>> vdpasim_net:
>>>> supported_classes net
>>>> max_supported_vqs 3
>>>> dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1
>>>> ACCESS_PLATFORM
>>>>
>>>> But it should be sufficient to
>>>> use features_src & feature_dst in this case. Actually, it should work
>>>> similar as to the cpu flags, the management software should introduce
>>>> the concept of cluster which means the maximal set of common features
>>>> is calculated and provisioned during device creation to allow
>>>> migration among the nodes inside the cluster.
>>>>
>>>> Yes, this is one way mgmt software may implement, but I am not sure
>>>> if it's the only way. For e.g. for cpu flags, mgmt software can
>>>> infer the guest cpus features in use from all qemu command line
>>>> arguments and host cpu features/capability, which doesn't need to
>>>> remember creation arguments and is easy to recover from failure
>>>> without having to make the VM config persistent in data store. I
>>>> thought it would be great if vdpa CLI design could offer the same.
>>>>
>>>> One minor difference is that we have cpu model abstraction, so we can
>>>> have things like:
>>>>
>>>> ./qemu-system-x86_64 -cpu EPYC
>>>>
>>>> Which implies the cpu features/flags where vDPA doesn't have. But
>>>> consider it's just a 64bit (or 128 in the future), it doesn't seems to
>>>> be too complex for the management to know, we probably need to start
>>>> from this and then we can try to introduce some generation/model after
>>>> it is agreed on most of the vendors.
>>>>
>>>> What you refer to is the so-called named model for CPU flags. I
>>>> think it's a good addition to have some generation or named model
>>>> defined for vDPA. But I don't get the point for how it relates to
>>>> exposing the actual value of device features? Are you saying in
>>>> this case you'd rather expose the model name than the actual value
>>>> of feature bits? Well, I think we can expose both in different
>>>> fields when there's really such a need.
>>> It's something like:
>>>
>>> vdpa dev add name dev1 mgmtdev vdpasim_net device_features
>>> VDPA_NET_MODEL_1
>>>
>>> and VDPA_NET_MODEL_1 implies some feature sets.
>>
>> Not sure if this could be very useful for virtio devices, given we
>> don't have a determined set of virtio features unlike CPU
>> generation/model, but I think even with the features_default property
>> we can still achieve that.
>>
>> -Siwei
>
>
> Yes.
Let me get some time to implement and post the relevant patches (mostly
in iproute) later. Basically this would supplement those config
attributes introduced through the 'vdpa dev show' series below [1] with
provisioned device features to reference:
[1]
https://lore.kernel.org/virtualization/1665793690-28120-1-git-send-email-si-wei.liu@oracle.com/
Thanks,
-Siwei
>
> Thanks
>
>
>>
>>>
>>>> BTW with regard to the cpu model in mgmt software implementation,
>>>> the one implemented in libvirt is a mixed "Host model" [1] with
>>>> taking advantage of QEMU named model and exposing additional
>>>> individual CPU features that gets close to what host CPU offers.
>>> So creating vDPA device without "device_features" is somehow the host
>>> model, it will have all features that is supported by the parent.
>>>
>>>> I think this implies that mgmt software should have to understand
>>>> what the model name really means in terms of individual CPU
>>>> features, so having feature bit value exposed will just do more
>>>> help if vDPA goes the same way.
>>> Exactly.
>>>
>>> Thanks
>>>
>>>>
>>>> Regards,
>>>> -Siwei
>>>>
>>>> [1]
>>>> https://qemu-project.gitlab.io/qemu/system/qemu-cpu-models.html#two-ways-to-configure-cpu-models-with-qemu-kvm
>>>>
>>>>
>>>> Thanks
>>>>
>>>> Thanks,
>>>> -Siwei
>>>>
>>>>
>>>> Thanks
>>>>
>>>> Thanks,
>>>> -Siwei
>>>>
>>>>
>>>> 2) provision vDPA device with a subset of the features
>>>>
>>>> # vdpa dev add name dev1 mgmtdev vdpasim_net device_features
>>>> 0x300020000
>>>> # vdpa dev config show
>>>> dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
>>>> negotiated_features CTRL_VQ VERSION_1 ACCESS_PLATFORM
>>>>
>>>> Reviewed-by: Eli Cohen <elic@nvidia.com>
>>>> Signed-off-by: Jason Wang <jasowang@redhat.com>
>>>> ---
>>>> drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 11 ++++++++++-
>>>> 1 file changed, 10 insertions(+), 1 deletion(-)
>>>>
>>>> diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
>>>> b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
>>>> index 886449e88502..a9ba02be378b 100644
>>>> --- a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
>>>> +++ b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
>>>> @@ -254,6 +254,14 @@ static int vdpasim_net_dev_add(struct
>>>> vdpa_mgmt_dev *mdev, const char *name,
>>>> dev_attr.work_fn = vdpasim_net_work;
>>>> dev_attr.buffer_size = PAGE_SIZE;
>>>>
>>>> + if (config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) {
>>>> + if (config->device_features &
>>>> + ~dev_attr.supported_features)
>>>> + return -EINVAL;
>>>> + dev_attr.supported_features &=
>>>> + config->device_features;
>>>> + }
>>>> +
>>>> simdev = vdpasim_create(&dev_attr);
>>>> if (IS_ERR(simdev))
>>>> return PTR_ERR(simdev);
>>>> @@ -294,7 +302,8 @@ static struct vdpa_mgmt_dev mgmt_dev = {
>>>> .id_table = id_table,
>>>> .ops = &vdpasim_net_mgmtdev_ops,
>>>> .config_attr_mask = (1 << VDPA_ATTR_DEV_NET_CFG_MACADDR |
>>>> - 1 << VDPA_ATTR_DEV_NET_CFG_MTU),
>>>> + 1 << VDPA_ATTR_DEV_NET_CFG_MTU |
>>>> + 1 << VDPA_ATTR_DEV_FEATURES),
>>>> .max_supported_vqs = VDPASIM_NET_VQ_NUM,
>>>> .supported_features = VDPASIM_NET_FEATURES,
>>>> };
>>>>
>>>>
>>>>
>>
>
[-- Attachment #1.2: Type: text/html, Size: 39205 bytes --]
[-- Attachment #2: Type: text/plain, Size: 183 bytes --]
_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
2022-10-17 18:43 ` Si-Wei Liu
@ 2022-10-18 7:45 ` Jason Wang
0 siblings, 0 replies; 55+ messages in thread
From: Jason Wang @ 2022-10-18 7:45 UTC (permalink / raw)
To: Si-Wei Liu
Cc: mst, Eli Cohen, Parav Pandit, Wu Zongyong, virtualization,
linux-kernel, eperezma, Zhu Lingshan, Gautam Dawar, Cindy Lu,
Yongji Xie, Eli Cohen
在 2022/10/18 02:43, Si-Wei Liu 写道:
>
>
> On 10/13/2022 12:10 AM, Jason Wang wrote:
>>
>> 在 2022/10/7 08:35, Si-Wei Liu 写道:
>>>
>>>
>>> On 9/28/2022 9:55 PM, Jason Wang wrote:
>>>> On Tue, Sep 27, 2022 at 5:41 PM Si-Wei Liu <si-wei.liu@oracle.com>
>>>> wrote:
>>>>>
>>>>>
>>>>> On 9/26/2022 8:59 PM, Jason Wang wrote:
>>>>>
>>>>> On Tue, Sep 27, 2022 at 9:02 AM Si-Wei Liu <si-wei.liu@oracle.com>
>>>>> wrote:
>>>>>
>>>>>
>>>>> On 9/26/2022 12:11 AM, Jason Wang wrote:
>>>>>
>>>>> On Sat, Sep 24, 2022 at 4:01 AM Si-Wei Liu <si-wei.liu@oracle.com>
>>>>> wrote:
>>>>>
>>>>>
>>>>> On 9/21/2022 7:43 PM, Jason Wang wrote:
>>>>>
>>>>> This patch implements features provisioning for vdpa_sim_net.
>>>>>
>>>>> 1) validating the provisioned features to be a subset of the parent
>>>>> features.
>>>>> 2) clearing the features that is not wanted by the userspace
>>>>>
>>>>> For example:
>>>>>
>>>>> # vdpa mgmtdev show
>>>>> vdpasim_net:
>>>>> supported_classes net
>>>>> max_supported_vqs 3
>>>>> dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT
>>>>> VERSION_1 ACCESS_PLATFORM
>>>>>
>>>>> Sighs, not to blame any one and it's perhaps too late, but this
>>>>> "dev_features" attr in "mgmtdev show" command output should have been
>>>>> called "supported_features" in the first place.
>>>>>
>>>>> Not sure I get this, but I guess this is the negotiated features
>>>>> actually.
>>>>>
>>>>> Actually no, that is why I said the name is a bit confusing and
>>>>> "supported_features" might sound better.
>>>>>
>>>>> You're right, it's an mgmtdev show actually.
>>>>>
>>>>> This attribute in the parent device (mgmtdev) denotes the real
>>>>> device capability for what virtio features can be supported by the
>>>>> parent device. Any unprivileged user can check into this field to
>>>>> know parent device's capability without having to create a child
>>>>> vDPA device at all. The features that child vDPA device may
>>>>> support should be a subset of, or at most up to what the parent
>>>>> device offers. For e.g. the vdpa device dev1 you created below can
>>>>> expose less or equal device_features bit than 0x308820028 (MTU MAC
>>>>> CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM), but
>>>>> shouldn't be no more than what the parent device can actually
>>>>> support.
>>>>>
>>>>> Yes, I didn't see anything wrong with "dev_features",
>>>>>
>>>>> Yep, it didn't appear to me anything wrong either at first sight,
>>>>> then I gave my R-b on the series introduced this attribute. But
>>>>> it's not a perfect name, either, on the other hand. Parav later
>>>>> pointed out that the corresponding enum definition for this
>>>>> attribute should follow pre-existing naming convention that we
>>>>> should perhaps do
>>>>> s/VDPA_ATTR_DEV_SUPPORTED_FEATURES/VDPA_ATTR_MGMTDEV_SUPPORTED_FEATURES/
>>>>> to get it renamed, as this is a mgmtdev level attribute, which I
>>>>> agree. Now that with the upcoming "device_features" attribute
>>>>> (vdpa dev level) from this series, it's subject to another
>>>>> confusions between these two similar names, but actually would
>>>>> represent things at different level. While all other attributes in
>>>>> "mgmtdev dev show" seem to be aligned with the "supported_"
>>>>> prefix, e.g. supported_classes, max_supported_vqs, from which I
>>>>> think the stance of device is already implied through "mgmtdev" in
>>>>> the command. For the perspective of clarify and easy distinction,
>>>>> "supported_features" seems to be a better name than "dev_features".
>>>> See another reply, I think I get your point,
>>>>
>>>> 1) VDPA_ATTR_VDPA_DEV_SUPPORTED_FEATURES (lingshan's series) and
>>>> VDPA_ATTR_VDPA_DEV_FEATURES should be equivalent and unified to a
>>>> single attribute.
>>>> 2) A better name to "supported_features" should be fine, patches
>>>> are welcomed
>>>>
>>>>> it aligns to the
>>>>> virtio spec which means the features could be used to create a vdpa
>>>>> device. But if everyone agree on the renaming, I'm fine.
>>>>>
>>>>> Never mind, if it's late don't have to bother.
>>>>>
>>>>>
>>>>>
>>>>> I think Ling Shan is working on reporting both negotiated features
>>>>> with the device features.
>>>>>
>>>>> Does it imply this series is connected to another work in
>>>>> parallel? Is it possible to add a reference in the cover letter?
>>>>>
>>>>> I'm not sure, I remember Ling Shan did some work to not block the
>>>>> config show in this commit:
>>>>>
>>>>> commit a34bed37fc9d3da319bb75dfbf02a7d3e95e12de
>>>>> Author: Zhu Lingshan <lingshan.zhu@intel.com>
>>>>> Date: Fri Jul 22 19:53:07 2022 +0800
>>>>>
>>>>> vDPA: !FEATURES_OK should not block querying device config space
>>>>>
>>>>> We need some changes in the vdpa tool to show device_features
>>>>> unconditionally in the "dev config show" command.
>>>>>
>>>>> That's true, I think I ever pointed it out to Lingshan before,
>>>>> that it's not needed to bother exposing those config space fields
>>>>> in "dev config show" output, if the only intent is for live
>>>>> migration of device features between nodes. For vDPA live
>>>>> migration, what cares most is those configuration parameters
>>>>> specified on vdpa creation, and userspace VMM (QEMU) is supposed
>>>>> to take care of saving and restoring live device states. I think
>>>>> it's easier to extend "vdpa dev show" output to include
>>>>> device_features and other config params as well, rather than count
>>>>> on validity of various config space fields.
>>>> Probably, but for the migration it's more about the ability of the
>>>> mgmtdev instead of the vDPA device itself I think.
>>> If picking the appropriate device for migration is what it is
>>> concerned, it's subject to the capability that mgmtdev offers.
>>> That's true, for sure.
>>>
>>> On the other hand, mgmt software would also need to take care of
>>> reconstructing the destination device with the same configuration as
>>> that at the source side. For example, a mgmtdev on source supports
>>> features A, B, C, D, and destination mgmtdev supports features B,
>>> C, D, E. When vdpa device on the source is initially created with
>>> features B and C but without feature D (noted: creation with a
>>> subset of mgmtdev features was already supported before, and this
>>> series just makes it more explicit), the mgmt software is supposed
>>> to equally create a device with features B and C on dest, even
>>> though the destination may support feature D that the mgmtdev on
>>> both sides can support. My point is, we should have some flexibility
>>> on the mgmt software implementation that allows the mgmt software to
>>> easily tell apart the exact features (i.e. B and C in the above
>>> example) and the exact configuration a specific vdpa device was
>>> originally created with, via some simple query command. Having mgmt
>>> software to remember the vdpa creation args could work, but on the
>>> other hand it'd be nice to allow lightweight software implementation
>>> without having to persist the list of vdpa args and make vdpa tool
>>> more self-contained.
>>>
>>> I will post a patch (series) shortly to demonstrate this idea.
>>> Basically, there's no actual need to mess around with those config
>>> space values for live migration. It was not built for that purpose.
>>
>>
>> Ok, let's see.
>>
>>
>>>
>>>>
>>>>> https://lore.kernel.org/virtualization/454bdf1b-daa1-aa67-2b8c-bc15351c1851@oracle.com/
>>>>>
>>>>>
>>>>> It's not just insufficient, but sometimes is incorrect to create
>>>>> vDPA device using the config space fields. For instance, MAC
>>>>> address in config space can be changed temporarily (until device
>>>>> reset) via ctrl_vq VIRTIO_NET_CTRL_MAC_ADDR_SET command. It's
>>>>> incorrect to create vDPA using the MAC address shown in the config
>>>>> space.
>>>> I think it's still a must for create the mac with the exact mac
>>>> address:
>>>>
>>>> 1) VIRTIO_NET_F_CTRL_MAC is not a must
>>>> 2) there's no way for us to know whether or not the mac has been
>>>> changed
>>> Noted I think here we are still talking about VERSION_1 device which
>>> is spec conforming. So far as I understand the spec, if the
>>> VIRTIO_NET_F_CTRL_MAC feature is not negotiated, there's no way for
>>> driver to change the default MAC address.
>>
>>
>> For 1.0 device yes.
>>
>>
>>>
>>> Even if we want to simulate or support a legacy device model, when
>>> MAC address is changed by legacy driver somehow, QEMU should be able
>>> to detect this and issue a vdpa ioctl call to change the MAC address
>>> filter underneath. I don't see that it ever happens in today's code,
>>> so I presume the only possibility this may work is that the specific
>>> vDPA device may have an internal learning bridge that adapts to what
>>> MAC address the driver actually sends.
>>
>>
>> This is not true AFAIK. E.g when switchdev is enabled for mlx5 parent.
> Hmmm, I guess you mean switchdev mode with external learning bridge
> software e.g. Open vSwitch? It's conceptionally the same with device
> internal learning bridge, no?
I was told by Eli that when switchdev is enabled there will be no
learning bridge. I might be wrong, cc Eli for more comments.
>
> OK, though the point was that QEMU should anyway notify the backend of
> the mac address change for vDPA driver to apply the new MAC filter,
> similar to the way how CTRL_MAC ctrl_vq command is doing.
Yes.
> It should not blindly assume that the every vDPA hardware may have
> underlying learning bridge construct, being internal or external.
> Basically it's not a universal assumption on the existence of learning
> bridge, this won't work for any other vDPA NIC without switchdev or
> learning bridge.
>
>>
>>
>>> In this case, since the device doesn't care, recreate with the MAC
>>> in use is not needed, and technically it is even incorrect. In data
>>> centers or cloud environment, MAC address is usually controlled and
>>> managed by some central entity/service. If a driver can dominate the
>>> MAC address in use by deliberately overriding the default MAC and
>>> bypassing the central rule via live migration, that'd be a more
>>> severe security issue to address in the first place.
>>
>>
>> There used to be a discussion to allow trust and spoof check as what
>> SR-IOV did. For safety, we can filter out CTRL_MAC right now. But I
>> think it's something out of the scope for this discussion.
> Sorry I don't get what you mean here, but I guess we may talk about
> different thing here (it seems you talked about trusted model that
> allows any MAC address, but it's orthogonal to programming MAC address
> filter to the underlying hardware as far as I understand).
Probably, what I meant is that, most SRIOV vendor allow to forbid change
VF mac addresses and other filter for safety.
>
>>
>> But I still don't get what's wrong with have the same mac address
>> provisioned in both src and dst.
> It looks like we may have misunderstood each other - that's exactly
> the point I want to make. The persistent mac address provisioned in
> dst by the mgmt software should stay the same with that on src, which
> is the default mac address rather than whatever other (temporary) mac
> address the VM might be using at the time of migration switchover at
> the source.
Yes, I think we are at the same page now.
>
>> It is the model used currently (e.g libvirt will guarantee the same
>> mac in both src and dst). The mgmt software can then guarantee that
>> the mac was fetched from the centralized manager.
> Right, this is exactly the way our mgmt software works.
>
>> And we can't depend purely on the migration since in some case it
>> can't work: e.g src MTU 4000 dst MTU 1500, migration will fail and
>> mgmt stack need to provision an 4000 to work.
> This seems like a bug of libvirt. For our case, we strictly prohibit
> unequal MTU on src & dst to work. Even migrating from MTU 1500 to
> 4000, it effectively changes the underlying behavior for packet
> dropping and network setup at which maximum size the packet should be
> allowed when entering the VM.
Yes, this means the management layer should guarantee exact the same
attribute for vDPA provisioned in both source and destination.
>>
>>
>>>
>>>> 3) migration code can restore the mac during restore
>>>>
>>>> So exactly the same mac address is still required. (This is the same
>>>> as we are doing for live migration on software virtio)
>>>>
>>>>> Another example, if the source vDPA device has MAC address table
>>>>> size limit of 100, then in the destination we should pick parent
>>>>> device with size limit no smaller than that, and create vDPA on
>>>>> remote node matching the exact same size. There's nothing config
>>>>> space field can assist here.
>>>> Two ways:
>>>>
>>>> 1) mgmtdev should show the mac table size so mgmt layer can provision
>>>> the mac table size
>>>> 2) If the mac table exceeds what is supported in the destination, it
>>>> needs to enable the all uni in this case.
>>> Yep, so no field in the config space can help with these two
>>> solutions, right? MAC table size is not showing up there. Whether
>>> the parent device supports ALLUNI via VIRTIO_NET_F_CTRL_RX is not
>>> there, either. (showing them in the 'vdpa mgmtdev show' output is
>>> the right thing IMHO).
>>>
>>>>
>>>>> One example further, in the future, if we are going to introduce
>>>>> mandatory feature (for e.g. VERSION_1, RING_PACKED) that the
>>>>> device is unable to support the opposite case, the destination
>>>>> device should be created with equally same mandatory device
>>>>> features, which only vDPA creation parameters should matter. While
>>>>> I can't think of a case that the mgmt software or live migration
>>>>> tool would have to count on config space fields only.
>>>> Yes, in this case we need to introduce new netlink attributes for both
>>>> getting mandatory features from the management device and provisioning
>>>> those manadating features.
>>> True, management device level thing again, not related to anything
>>> in the config space.
>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>> 1) provision vDPA device with all features that are supported by the
>>>>> net simulator
>>>>>
>>>>> # vdpa dev add name dev1 mgmtdev vdpasim_net
>>>>> # vdpa dev config show
>>>>> dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
>>>>> negotiated_features MTU MAC CTRL_VQ CTRL_MAC_ADDR VERSION_1
>>>>> ACCESS_PLATFORM
>>>>>
>>>>> Maybe not in this patch, but for completeness for the whole series,
>>>>> could we also add device_features to the output?
>>>>>
>>>>> Lingshan, could you please share your thoughts or patch on this?
>>>>>
>>>>> Noted here the device_features argument specified during vdpa
>>>>> creation is introduced by this series itself, it somehow slightly
>>>>> changed the original semantics of what device_features used to be.
>>>>>
>>>>> I'm not sure I get this, we don't support device_features in the past
>>>>> and it is used to provision device features to the vDPA device which
>>>>> seems to be fine.
>>>>>
>>>>> Before this change, only look at the dev_features in "mgmtdev
>>>>> show" and remember creation parameters is sufficient to get to all
>>>>> needed info for creating vDPA at destination.
>>>> Note that even with the same vendor, mgmtdev may support different
>>>> features.
>>>>
>>>>> After this change, dev_features in "mgmtdev show" becomes less
>>>>> relevant, as it would need to remember vdpa creation parameters
>>>>> plus the device_features attribute. While this series allows cross
>>>>> vendor live migration, it would complicate the implementation of
>>>>> mgmt software, on the other hand.
>>>> To allow cross vendor live migration I couldn't find a better way.
>>> The idea itself is great, I think, though the CLI interface may have
>>> some space for improvement. For example, user has to supply the
>>> heximal value consisting of each feature bit, which is a bit
>>> challenging for normal users who are not super familiar with each
>>> virtio feature. On the other hand, there could be ambiguity against
>>> other vdpa create option, e.g. users may do "vdpa dev add name vdpa0
>>> mgmtdev ... mtu 1500 device_features 0x300020000" (no F_MTU feature
>>> bit in device_features) that needs special validation in the code.
>>
>>
>> We can accept e.g XML in the future I think.
> Regardless of XML being a good interface or not for end users, but I
> don't see how it relates to the issue here i.e. conflict/ambiguity or
> extra validation in the (kernel) code.
It's only about choosing a suitable interface between vdpa tool and
mangment layer instead of solely depending on the command line arguments
since we may support a lot of different features in the future.
>
>>
>>
>>>
>>> How about we follow the CPU flags model or QEMU virtio-net-pci args
>>> to define property representing each feature bit? I think the
>>> current convention for each "vdpa dev add" option implies that the
>>> corresponding feature bit will be enabled once specified in
>>> creation. Similarly we can introduce additional option representing
>>> each feature bit, along with a new features_default property
>>> denoting the initial value for device_feature bits:
>>>
>>> # vdpa mgmtdev show
>>> vdpasim_net:
>>> supported_classes net
>>> max_supported_vqs 3
>>> dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1
>>> ACCESS_PLATFORM
>>> # vdpa dev add name dev1 mgmtdev vdpasim_net features_default off \
>>> csum on guest_csum on mtu 2000 ctrl_vq on
>>> version1 on access_platform on
>>> # vdpa dev show
>>> dev1: type network mgmtdev vdpasim_net vendor_id 0 max_vqs 3
>>> max_vq_size 256
>>> features_default off mtu 2000
>>> device_features CSUM GUEST_CSUM MTU CTRL_VQ VERSION_1
>>> ACCESS_PLATFORM
>>>
>>> If the features_default property is left unspecified or with the
>>> "inherited" value, it would just inherit all of the
>>> supported_features from mgmtdev (which is already the case of today).
>>>
>>> # vdpa dev add name dev1 mgmtdev vdpasim_net features_default inherited
>>> # vdpa dev show
>>> dev1: type network mgmtdev vdpasim_net vendor_id 0 max_vqs 3
>>> max_vq_size 256
>>> features_default inherited
>>> device_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1
>>> ACCESS_PLATFORM
>>>
>>> I can definitely help implement this model if you find it fits.
>>
>>
>> I prefer XML since it could be reused and we may exceed 64bit
>> limitation in the future. But we can hear from others.
> I don't see how this can be re-used by QEMU as QMP is not
> taking/exporting XML. Are we talking about libvirt here, which happens
> to be one amongst many others? My personal feeling is that not quite a
> lot of human end users (rather than management software or script)
> today would prefer using XML. Instead, like any other iproute utility,
> json seems to a more popular interface for script and mgmt software to
> consume, which vdpa tool supports natively already.
>
> I think basically we can support two set of CLI interfaces, one
> friendly enough for human users, and another scriptable and parseable
> by management software users. IMO for now we should start to focus on
> the human oriented CLI design first. Whether XML v.s. json being an
> ideal interface for managment software would be another discussion
> that would need more inputs from the broader range of extended
> community, which is not worth distracting from.
That's fine, is the end user is more about a program but a human, json
should be better.
Thanks
>
>>
>>>
>>>>
>>>>>
>>>>>
>>>>> When simply look at the "vdpa dev config show" output, I cannot
>>>>> really
>>>>> tell the actual device_features that was used in vdpa creation.
>>>>> For e.g.
>>>>> there is a missing feature ANY_LAYOUT from negotiated_features
>>>>> compared
>>>>> with supported_features in mgmtdev, but the orchestration software
>>>>> couldn't tell if the vdpa device on destination host should be
>>>>> created
>>>>> with or without the ANY_LAYOUT feature.
>>>>>
>>>>> I think VERSION_1 implies ANY_LAYOUT.
>>>>>
>>>>> Right, ANY_LAYOUT is a bad example. A good example might be that,
>>>>> I knew the parent mgmtdev on migration source node supports
>>>>> CTRL_MAC_ADDR, but I don't find it in negotiated_features.
>>>>>
>>>>> I think we should use the features that we got from "mgmtdev show"
>>>>> instead of "negotiated features".
>>>>>
>>>>> That was how it's supposed to work previously, but with this
>>>>> series, I think the newly introduced device_features will be
>>>>> needed instead of the one in "mgmtdev show".
>>>> Just to clarify, there won't be a device_features in mgmtdev show
>>>> since it is device specific, each individual device can have its own
>>>> device features which are subset of what is supported by the mgmtdev.
>>> Yep.
>>>>
>>>>>
>>>>> On the migration destination node, the parent device does support
>>>>> all features as the source offers, including CTRL_MAC_ADDR. What
>>>>> device features you would expect the mgmt software to create
>>>>> destination vdpa device with, if not otherwise requiring mgmt
>>>>> software to remember all the arguments on device creation?
>>>> So the provisioning in the destination should use exactly the same
>>>> device_feautres as what the vdpa device has in the source. But before
>>>> this, management layer should guarantee to provision a vDPA device
>>>> whose device_features can be supported on the destination in order to
>>>> allow live migration.
>>> Exactly.
>>>>
>>>>> So in this example, we need use "dev_features" so we get exact the
>>>>> same features after and operation as either src or dst.
>>>>>
>>>>> If the device_features vDPA created with at the source doesn't
>>>>> include CTRL_MAC_ADDR even though parent supports it, then the
>>>>> vDPA to be created at the destination shouldn't come with
>>>>> CTRL_MAC_ADDR either, regardless of whether or not CTRL_MAC_ADDR
>>>>> is present in destination "mgmtdev show".
>>>>>
>>>>> However, if just taking look at negotiated_features, some mgmt
>>>>> software implementations which don't persist the creation
>>>>> parameters can't get the device features a certain vDPA device at
>>>>> the source node was created with.
>>>>>
>>>>>
>>>>> SOURCE# vdpa mgmtdev show
>>>>> vdpasim_net:
>>>>> supported_classes net
>>>>> max_supported_vqs 3
>>>>> dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT
>>>>> VERSION_1 ACCESS_PLATFORM
>>>>> SOURCE# vdpa dev config show
>>>>> dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
>>>>> negotiated_features MTU MAC CTRL_VQ VERSION_1 ACCESS_PLATFORM
>>>>>
>>>>> DESTINATION# vdpa mgmtdev show
>>>>> vdpasim_net:
>>>>> supported_classes net
>>>>> max_supported_vqs 3
>>>>> dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT
>>>>> VERSION_1 ACCESS_PLATFORM
>>>>>
>>>>> But it should be sufficient to
>>>>> use features_src & feature_dst in this case. Actually, it should work
>>>>> similar as to the cpu flags, the management software should introduce
>>>>> the concept of cluster which means the maximal set of common features
>>>>> is calculated and provisioned during device creation to allow
>>>>> migration among the nodes inside the cluster.
>>>>>
>>>>> Yes, this is one way mgmt software may implement, but I am not
>>>>> sure if it's the only way. For e.g. for cpu flags, mgmt software
>>>>> can infer the guest cpus features in use from all qemu command
>>>>> line arguments and host cpu features/capability, which doesn't
>>>>> need to remember creation arguments and is easy to recover from
>>>>> failure without having to make the VM config persistent in data
>>>>> store. I thought it would be great if vdpa CLI design could offer
>>>>> the same.
>>>>>
>>>>> One minor difference is that we have cpu model abstraction, so we can
>>>>> have things like:
>>>>>
>>>>> ./qemu-system-x86_64 -cpu EPYC
>>>>>
>>>>> Which implies the cpu features/flags where vDPA doesn't have. But
>>>>> consider it's just a 64bit (or 128 in the future), it doesn't
>>>>> seems to
>>>>> be too complex for the management to know, we probably need to start
>>>>> from this and then we can try to introduce some generation/model
>>>>> after
>>>>> it is agreed on most of the vendors.
>>>>>
>>>>> What you refer to is the so-called named model for CPU flags. I
>>>>> think it's a good addition to have some generation or named model
>>>>> defined for vDPA. But I don't get the point for how it relates to
>>>>> exposing the actual value of device features? Are you saying in
>>>>> this case you'd rather expose the model name than the actual value
>>>>> of feature bits? Well, I think we can expose both in different
>>>>> fields when there's really such a need.
>>>> It's something like:
>>>>
>>>> vdpa dev add name dev1 mgmtdev vdpasim_net device_features
>>>> VDPA_NET_MODEL_1
>>>>
>>>> and VDPA_NET_MODEL_1 implies some feature sets.
>>>
>>> Not sure if this could be very useful for virtio devices, given we
>>> don't have a determined set of virtio features unlike CPU
>>> generation/model, but I think even with the features_default
>>> property we can still achieve that.
>>>
>>> -Siwei
>>
>>
>> Yes.
> Let me get some time to implement and post the relevant patches
> (mostly in iproute) later. Basically this would supplement those
> config attributes introduced through the 'vdpa dev show' series below
> [1] with provisioned device features to reference:
>
> [1]
> https://lore.kernel.org/virtualization/1665793690-28120-1-git-send-email-si-wei.liu@oracle.com/
>
>
> Thanks,
> -Siwei
>
>>
>> Thanks
>>
>>
>>>
>>>>
>>>>> BTW with regard to the cpu model in mgmt software implementation,
>>>>> the one implemented in libvirt is a mixed "Host model" [1] with
>>>>> taking advantage of QEMU named model and exposing additional
>>>>> individual CPU features that gets close to what host CPU offers.
>>>> So creating vDPA device without "device_features" is somehow the host
>>>> model, it will have all features that is supported by the parent.
>>>>
>>>>> I think this implies that mgmt software should have to understand
>>>>> what the model name really means in terms of individual CPU
>>>>> features, so having feature bit value exposed will just do more
>>>>> help if vDPA goes the same way.
>>>> Exactly.
>>>>
>>>> Thanks
>>>>
>>>>>
>>>>> Regards,
>>>>> -Siwei
>>>>>
>>>>> [1]
>>>>> https://qemu-project.gitlab.io/qemu/system/qemu-cpu-models.html#two-ways-to-configure-cpu-models-with-qemu-kvm
>>>>>
>>>>>
>>>>> Thanks
>>>>>
>>>>> Thanks,
>>>>> -Siwei
>>>>>
>>>>>
>>>>> Thanks
>>>>>
>>>>> Thanks,
>>>>> -Siwei
>>>>>
>>>>>
>>>>> 2) provision vDPA device with a subset of the features
>>>>>
>>>>> # vdpa dev add name dev1 mgmtdev vdpasim_net device_features
>>>>> 0x300020000
>>>>> # vdpa dev config show
>>>>> dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
>>>>> negotiated_features CTRL_VQ VERSION_1 ACCESS_PLATFORM
>>>>>
>>>>> Reviewed-by: Eli Cohen <elic@nvidia.com>
>>>>> Signed-off-by: Jason Wang <jasowang@redhat.com>
>>>>> ---
>>>>> drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 11 ++++++++++-
>>>>> 1 file changed, 10 insertions(+), 1 deletion(-)
>>>>>
>>>>> diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
>>>>> b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
>>>>> index 886449e88502..a9ba02be378b 100644
>>>>> --- a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
>>>>> +++ b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
>>>>> @@ -254,6 +254,14 @@ static int vdpasim_net_dev_add(struct
>>>>> vdpa_mgmt_dev *mdev, const char *name,
>>>>> dev_attr.work_fn = vdpasim_net_work;
>>>>> dev_attr.buffer_size = PAGE_SIZE;
>>>>>
>>>>> + if (config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) {
>>>>> + if (config->device_features &
>>>>> + ~dev_attr.supported_features)
>>>>> + return -EINVAL;
>>>>> + dev_attr.supported_features &=
>>>>> + config->device_features;
>>>>> + }
>>>>> +
>>>>> simdev = vdpasim_create(&dev_attr);
>>>>> if (IS_ERR(simdev))
>>>>> return PTR_ERR(simdev);
>>>>> @@ -294,7 +302,8 @@ static struct vdpa_mgmt_dev mgmt_dev = {
>>>>> .id_table = id_table,
>>>>> .ops = &vdpasim_net_mgmtdev_ops,
>>>>> .config_attr_mask = (1 << VDPA_ATTR_DEV_NET_CFG_MACADDR |
>>>>> - 1 << VDPA_ATTR_DEV_NET_CFG_MTU),
>>>>> + 1 << VDPA_ATTR_DEV_NET_CFG_MTU |
>>>>> + 1 << VDPA_ATTR_DEV_FEATURES),
>>>>> .max_supported_vqs = VDPASIM_NET_VQ_NUM,
>>>>> .supported_features = VDPASIM_NET_FEATURES,
>>>>> };
>>>>>
>>>>>
>>>>>
>>>
>>
>
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: [PATCH V2 2/3] vdpa_sim_net: support feature provisioning
@ 2022-10-18 7:45 ` Jason Wang
0 siblings, 0 replies; 55+ messages in thread
From: Jason Wang @ 2022-10-18 7:45 UTC (permalink / raw)
To: Si-Wei Liu
Cc: Cindy Lu, mst, Yongji Xie, linux-kernel, Gautam Dawar,
virtualization, eperezma, Wu Zongyong, Eli Cohen, Zhu Lingshan
在 2022/10/18 02:43, Si-Wei Liu 写道:
>
>
> On 10/13/2022 12:10 AM, Jason Wang wrote:
>>
>> 在 2022/10/7 08:35, Si-Wei Liu 写道:
>>>
>>>
>>> On 9/28/2022 9:55 PM, Jason Wang wrote:
>>>> On Tue, Sep 27, 2022 at 5:41 PM Si-Wei Liu <si-wei.liu@oracle.com>
>>>> wrote:
>>>>>
>>>>>
>>>>> On 9/26/2022 8:59 PM, Jason Wang wrote:
>>>>>
>>>>> On Tue, Sep 27, 2022 at 9:02 AM Si-Wei Liu <si-wei.liu@oracle.com>
>>>>> wrote:
>>>>>
>>>>>
>>>>> On 9/26/2022 12:11 AM, Jason Wang wrote:
>>>>>
>>>>> On Sat, Sep 24, 2022 at 4:01 AM Si-Wei Liu <si-wei.liu@oracle.com>
>>>>> wrote:
>>>>>
>>>>>
>>>>> On 9/21/2022 7:43 PM, Jason Wang wrote:
>>>>>
>>>>> This patch implements features provisioning for vdpa_sim_net.
>>>>>
>>>>> 1) validating the provisioned features to be a subset of the parent
>>>>> features.
>>>>> 2) clearing the features that is not wanted by the userspace
>>>>>
>>>>> For example:
>>>>>
>>>>> # vdpa mgmtdev show
>>>>> vdpasim_net:
>>>>> supported_classes net
>>>>> max_supported_vqs 3
>>>>> dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT
>>>>> VERSION_1 ACCESS_PLATFORM
>>>>>
>>>>> Sighs, not to blame any one and it's perhaps too late, but this
>>>>> "dev_features" attr in "mgmtdev show" command output should have been
>>>>> called "supported_features" in the first place.
>>>>>
>>>>> Not sure I get this, but I guess this is the negotiated features
>>>>> actually.
>>>>>
>>>>> Actually no, that is why I said the name is a bit confusing and
>>>>> "supported_features" might sound better.
>>>>>
>>>>> You're right, it's an mgmtdev show actually.
>>>>>
>>>>> This attribute in the parent device (mgmtdev) denotes the real
>>>>> device capability for what virtio features can be supported by the
>>>>> parent device. Any unprivileged user can check into this field to
>>>>> know parent device's capability without having to create a child
>>>>> vDPA device at all. The features that child vDPA device may
>>>>> support should be a subset of, or at most up to what the parent
>>>>> device offers. For e.g. the vdpa device dev1 you created below can
>>>>> expose less or equal device_features bit than 0x308820028 (MTU MAC
>>>>> CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM), but
>>>>> shouldn't be no more than what the parent device can actually
>>>>> support.
>>>>>
>>>>> Yes, I didn't see anything wrong with "dev_features",
>>>>>
>>>>> Yep, it didn't appear to me anything wrong either at first sight,
>>>>> then I gave my R-b on the series introduced this attribute. But
>>>>> it's not a perfect name, either, on the other hand. Parav later
>>>>> pointed out that the corresponding enum definition for this
>>>>> attribute should follow pre-existing naming convention that we
>>>>> should perhaps do
>>>>> s/VDPA_ATTR_DEV_SUPPORTED_FEATURES/VDPA_ATTR_MGMTDEV_SUPPORTED_FEATURES/
>>>>> to get it renamed, as this is a mgmtdev level attribute, which I
>>>>> agree. Now that with the upcoming "device_features" attribute
>>>>> (vdpa dev level) from this series, it's subject to another
>>>>> confusions between these two similar names, but actually would
>>>>> represent things at different level. While all other attributes in
>>>>> "mgmtdev dev show" seem to be aligned with the "supported_"
>>>>> prefix, e.g. supported_classes, max_supported_vqs, from which I
>>>>> think the stance of device is already implied through "mgmtdev" in
>>>>> the command. For the perspective of clarify and easy distinction,
>>>>> "supported_features" seems to be a better name than "dev_features".
>>>> See another reply, I think I get your point,
>>>>
>>>> 1) VDPA_ATTR_VDPA_DEV_SUPPORTED_FEATURES (lingshan's series) and
>>>> VDPA_ATTR_VDPA_DEV_FEATURES should be equivalent and unified to a
>>>> single attribute.
>>>> 2) A better name to "supported_features" should be fine, patches
>>>> are welcomed
>>>>
>>>>> it aligns to the
>>>>> virtio spec which means the features could be used to create a vdpa
>>>>> device. But if everyone agree on the renaming, I'm fine.
>>>>>
>>>>> Never mind, if it's late don't have to bother.
>>>>>
>>>>>
>>>>>
>>>>> I think Ling Shan is working on reporting both negotiated features
>>>>> with the device features.
>>>>>
>>>>> Does it imply this series is connected to another work in
>>>>> parallel? Is it possible to add a reference in the cover letter?
>>>>>
>>>>> I'm not sure, I remember Ling Shan did some work to not block the
>>>>> config show in this commit:
>>>>>
>>>>> commit a34bed37fc9d3da319bb75dfbf02a7d3e95e12de
>>>>> Author: Zhu Lingshan <lingshan.zhu@intel.com>
>>>>> Date: Fri Jul 22 19:53:07 2022 +0800
>>>>>
>>>>> vDPA: !FEATURES_OK should not block querying device config space
>>>>>
>>>>> We need some changes in the vdpa tool to show device_features
>>>>> unconditionally in the "dev config show" command.
>>>>>
>>>>> That's true, I think I ever pointed it out to Lingshan before,
>>>>> that it's not needed to bother exposing those config space fields
>>>>> in "dev config show" output, if the only intent is for live
>>>>> migration of device features between nodes. For vDPA live
>>>>> migration, what cares most is those configuration parameters
>>>>> specified on vdpa creation, and userspace VMM (QEMU) is supposed
>>>>> to take care of saving and restoring live device states. I think
>>>>> it's easier to extend "vdpa dev show" output to include
>>>>> device_features and other config params as well, rather than count
>>>>> on validity of various config space fields.
>>>> Probably, but for the migration it's more about the ability of the
>>>> mgmtdev instead of the vDPA device itself I think.
>>> If picking the appropriate device for migration is what it is
>>> concerned, it's subject to the capability that mgmtdev offers.
>>> That's true, for sure.
>>>
>>> On the other hand, mgmt software would also need to take care of
>>> reconstructing the destination device with the same configuration as
>>> that at the source side. For example, a mgmtdev on source supports
>>> features A, B, C, D, and destination mgmtdev supports features B,
>>> C, D, E. When vdpa device on the source is initially created with
>>> features B and C but without feature D (noted: creation with a
>>> subset of mgmtdev features was already supported before, and this
>>> series just makes it more explicit), the mgmt software is supposed
>>> to equally create a device with features B and C on dest, even
>>> though the destination may support feature D that the mgmtdev on
>>> both sides can support. My point is, we should have some flexibility
>>> on the mgmt software implementation that allows the mgmt software to
>>> easily tell apart the exact features (i.e. B and C in the above
>>> example) and the exact configuration a specific vdpa device was
>>> originally created with, via some simple query command. Having mgmt
>>> software to remember the vdpa creation args could work, but on the
>>> other hand it'd be nice to allow lightweight software implementation
>>> without having to persist the list of vdpa args and make vdpa tool
>>> more self-contained.
>>>
>>> I will post a patch (series) shortly to demonstrate this idea.
>>> Basically, there's no actual need to mess around with those config
>>> space values for live migration. It was not built for that purpose.
>>
>>
>> Ok, let's see.
>>
>>
>>>
>>>>
>>>>> https://lore.kernel.org/virtualization/454bdf1b-daa1-aa67-2b8c-bc15351c1851@oracle.com/
>>>>>
>>>>>
>>>>> It's not just insufficient, but sometimes is incorrect to create
>>>>> vDPA device using the config space fields. For instance, MAC
>>>>> address in config space can be changed temporarily (until device
>>>>> reset) via ctrl_vq VIRTIO_NET_CTRL_MAC_ADDR_SET command. It's
>>>>> incorrect to create vDPA using the MAC address shown in the config
>>>>> space.
>>>> I think it's still a must for create the mac with the exact mac
>>>> address:
>>>>
>>>> 1) VIRTIO_NET_F_CTRL_MAC is not a must
>>>> 2) there's no way for us to know whether or not the mac has been
>>>> changed
>>> Noted I think here we are still talking about VERSION_1 device which
>>> is spec conforming. So far as I understand the spec, if the
>>> VIRTIO_NET_F_CTRL_MAC feature is not negotiated, there's no way for
>>> driver to change the default MAC address.
>>
>>
>> For 1.0 device yes.
>>
>>
>>>
>>> Even if we want to simulate or support a legacy device model, when
>>> MAC address is changed by legacy driver somehow, QEMU should be able
>>> to detect this and issue a vdpa ioctl call to change the MAC address
>>> filter underneath. I don't see that it ever happens in today's code,
>>> so I presume the only possibility this may work is that the specific
>>> vDPA device may have an internal learning bridge that adapts to what
>>> MAC address the driver actually sends.
>>
>>
>> This is not true AFAIK. E.g when switchdev is enabled for mlx5 parent.
> Hmmm, I guess you mean switchdev mode with external learning bridge
> software e.g. Open vSwitch? It's conceptionally the same with device
> internal learning bridge, no?
I was told by Eli that when switchdev is enabled there will be no
learning bridge. I might be wrong, cc Eli for more comments.
>
> OK, though the point was that QEMU should anyway notify the backend of
> the mac address change for vDPA driver to apply the new MAC filter,
> similar to the way how CTRL_MAC ctrl_vq command is doing.
Yes.
> It should not blindly assume that the every vDPA hardware may have
> underlying learning bridge construct, being internal or external.
> Basically it's not a universal assumption on the existence of learning
> bridge, this won't work for any other vDPA NIC without switchdev or
> learning bridge.
>
>>
>>
>>> In this case, since the device doesn't care, recreate with the MAC
>>> in use is not needed, and technically it is even incorrect. In data
>>> centers or cloud environment, MAC address is usually controlled and
>>> managed by some central entity/service. If a driver can dominate the
>>> MAC address in use by deliberately overriding the default MAC and
>>> bypassing the central rule via live migration, that'd be a more
>>> severe security issue to address in the first place.
>>
>>
>> There used to be a discussion to allow trust and spoof check as what
>> SR-IOV did. For safety, we can filter out CTRL_MAC right now. But I
>> think it's something out of the scope for this discussion.
> Sorry I don't get what you mean here, but I guess we may talk about
> different thing here (it seems you talked about trusted model that
> allows any MAC address, but it's orthogonal to programming MAC address
> filter to the underlying hardware as far as I understand).
Probably, what I meant is that, most SRIOV vendor allow to forbid change
VF mac addresses and other filter for safety.
>
>>
>> But I still don't get what's wrong with have the same mac address
>> provisioned in both src and dst.
> It looks like we may have misunderstood each other - that's exactly
> the point I want to make. The persistent mac address provisioned in
> dst by the mgmt software should stay the same with that on src, which
> is the default mac address rather than whatever other (temporary) mac
> address the VM might be using at the time of migration switchover at
> the source.
Yes, I think we are at the same page now.
>
>> It is the model used currently (e.g libvirt will guarantee the same
>> mac in both src and dst). The mgmt software can then guarantee that
>> the mac was fetched from the centralized manager.
> Right, this is exactly the way our mgmt software works.
>
>> And we can't depend purely on the migration since in some case it
>> can't work: e.g src MTU 4000 dst MTU 1500, migration will fail and
>> mgmt stack need to provision an 4000 to work.
> This seems like a bug of libvirt. For our case, we strictly prohibit
> unequal MTU on src & dst to work. Even migrating from MTU 1500 to
> 4000, it effectively changes the underlying behavior for packet
> dropping and network setup at which maximum size the packet should be
> allowed when entering the VM.
Yes, this means the management layer should guarantee exact the same
attribute for vDPA provisioned in both source and destination.
>>
>>
>>>
>>>> 3) migration code can restore the mac during restore
>>>>
>>>> So exactly the same mac address is still required. (This is the same
>>>> as we are doing for live migration on software virtio)
>>>>
>>>>> Another example, if the source vDPA device has MAC address table
>>>>> size limit of 100, then in the destination we should pick parent
>>>>> device with size limit no smaller than that, and create vDPA on
>>>>> remote node matching the exact same size. There's nothing config
>>>>> space field can assist here.
>>>> Two ways:
>>>>
>>>> 1) mgmtdev should show the mac table size so mgmt layer can provision
>>>> the mac table size
>>>> 2) If the mac table exceeds what is supported in the destination, it
>>>> needs to enable the all uni in this case.
>>> Yep, so no field in the config space can help with these two
>>> solutions, right? MAC table size is not showing up there. Whether
>>> the parent device supports ALLUNI via VIRTIO_NET_F_CTRL_RX is not
>>> there, either. (showing them in the 'vdpa mgmtdev show' output is
>>> the right thing IMHO).
>>>
>>>>
>>>>> One example further, in the future, if we are going to introduce
>>>>> mandatory feature (for e.g. VERSION_1, RING_PACKED) that the
>>>>> device is unable to support the opposite case, the destination
>>>>> device should be created with equally same mandatory device
>>>>> features, which only vDPA creation parameters should matter. While
>>>>> I can't think of a case that the mgmt software or live migration
>>>>> tool would have to count on config space fields only.
>>>> Yes, in this case we need to introduce new netlink attributes for both
>>>> getting mandatory features from the management device and provisioning
>>>> those manadating features.
>>> True, management device level thing again, not related to anything
>>> in the config space.
>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>> 1) provision vDPA device with all features that are supported by the
>>>>> net simulator
>>>>>
>>>>> # vdpa dev add name dev1 mgmtdev vdpasim_net
>>>>> # vdpa dev config show
>>>>> dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
>>>>> negotiated_features MTU MAC CTRL_VQ CTRL_MAC_ADDR VERSION_1
>>>>> ACCESS_PLATFORM
>>>>>
>>>>> Maybe not in this patch, but for completeness for the whole series,
>>>>> could we also add device_features to the output?
>>>>>
>>>>> Lingshan, could you please share your thoughts or patch on this?
>>>>>
>>>>> Noted here the device_features argument specified during vdpa
>>>>> creation is introduced by this series itself, it somehow slightly
>>>>> changed the original semantics of what device_features used to be.
>>>>>
>>>>> I'm not sure I get this, we don't support device_features in the past
>>>>> and it is used to provision device features to the vDPA device which
>>>>> seems to be fine.
>>>>>
>>>>> Before this change, only look at the dev_features in "mgmtdev
>>>>> show" and remember creation parameters is sufficient to get to all
>>>>> needed info for creating vDPA at destination.
>>>> Note that even with the same vendor, mgmtdev may support different
>>>> features.
>>>>
>>>>> After this change, dev_features in "mgmtdev show" becomes less
>>>>> relevant, as it would need to remember vdpa creation parameters
>>>>> plus the device_features attribute. While this series allows cross
>>>>> vendor live migration, it would complicate the implementation of
>>>>> mgmt software, on the other hand.
>>>> To allow cross vendor live migration I couldn't find a better way.
>>> The idea itself is great, I think, though the CLI interface may have
>>> some space for improvement. For example, user has to supply the
>>> heximal value consisting of each feature bit, which is a bit
>>> challenging for normal users who are not super familiar with each
>>> virtio feature. On the other hand, there could be ambiguity against
>>> other vdpa create option, e.g. users may do "vdpa dev add name vdpa0
>>> mgmtdev ... mtu 1500 device_features 0x300020000" (no F_MTU feature
>>> bit in device_features) that needs special validation in the code.
>>
>>
>> We can accept e.g XML in the future I think.
> Regardless of XML being a good interface or not for end users, but I
> don't see how it relates to the issue here i.e. conflict/ambiguity or
> extra validation in the (kernel) code.
It's only about choosing a suitable interface between vdpa tool and
mangment layer instead of solely depending on the command line arguments
since we may support a lot of different features in the future.
>
>>
>>
>>>
>>> How about we follow the CPU flags model or QEMU virtio-net-pci args
>>> to define property representing each feature bit? I think the
>>> current convention for each "vdpa dev add" option implies that the
>>> corresponding feature bit will be enabled once specified in
>>> creation. Similarly we can introduce additional option representing
>>> each feature bit, along with a new features_default property
>>> denoting the initial value for device_feature bits:
>>>
>>> # vdpa mgmtdev show
>>> vdpasim_net:
>>> supported_classes net
>>> max_supported_vqs 3
>>> dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1
>>> ACCESS_PLATFORM
>>> # vdpa dev add name dev1 mgmtdev vdpasim_net features_default off \
>>> csum on guest_csum on mtu 2000 ctrl_vq on
>>> version1 on access_platform on
>>> # vdpa dev show
>>> dev1: type network mgmtdev vdpasim_net vendor_id 0 max_vqs 3
>>> max_vq_size 256
>>> features_default off mtu 2000
>>> device_features CSUM GUEST_CSUM MTU CTRL_VQ VERSION_1
>>> ACCESS_PLATFORM
>>>
>>> If the features_default property is left unspecified or with the
>>> "inherited" value, it would just inherit all of the
>>> supported_features from mgmtdev (which is already the case of today).
>>>
>>> # vdpa dev add name dev1 mgmtdev vdpasim_net features_default inherited
>>> # vdpa dev show
>>> dev1: type network mgmtdev vdpasim_net vendor_id 0 max_vqs 3
>>> max_vq_size 256
>>> features_default inherited
>>> device_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1
>>> ACCESS_PLATFORM
>>>
>>> I can definitely help implement this model if you find it fits.
>>
>>
>> I prefer XML since it could be reused and we may exceed 64bit
>> limitation in the future. But we can hear from others.
> I don't see how this can be re-used by QEMU as QMP is not
> taking/exporting XML. Are we talking about libvirt here, which happens
> to be one amongst many others? My personal feeling is that not quite a
> lot of human end users (rather than management software or script)
> today would prefer using XML. Instead, like any other iproute utility,
> json seems to a more popular interface for script and mgmt software to
> consume, which vdpa tool supports natively already.
>
> I think basically we can support two set of CLI interfaces, one
> friendly enough for human users, and another scriptable and parseable
> by management software users. IMO for now we should start to focus on
> the human oriented CLI design first. Whether XML v.s. json being an
> ideal interface for managment software would be another discussion
> that would need more inputs from the broader range of extended
> community, which is not worth distracting from.
That's fine, is the end user is more about a program but a human, json
should be better.
Thanks
>
>>
>>>
>>>>
>>>>>
>>>>>
>>>>> When simply look at the "vdpa dev config show" output, I cannot
>>>>> really
>>>>> tell the actual device_features that was used in vdpa creation.
>>>>> For e.g.
>>>>> there is a missing feature ANY_LAYOUT from negotiated_features
>>>>> compared
>>>>> with supported_features in mgmtdev, but the orchestration software
>>>>> couldn't tell if the vdpa device on destination host should be
>>>>> created
>>>>> with or without the ANY_LAYOUT feature.
>>>>>
>>>>> I think VERSION_1 implies ANY_LAYOUT.
>>>>>
>>>>> Right, ANY_LAYOUT is a bad example. A good example might be that,
>>>>> I knew the parent mgmtdev on migration source node supports
>>>>> CTRL_MAC_ADDR, but I don't find it in negotiated_features.
>>>>>
>>>>> I think we should use the features that we got from "mgmtdev show"
>>>>> instead of "negotiated features".
>>>>>
>>>>> That was how it's supposed to work previously, but with this
>>>>> series, I think the newly introduced device_features will be
>>>>> needed instead of the one in "mgmtdev show".
>>>> Just to clarify, there won't be a device_features in mgmtdev show
>>>> since it is device specific, each individual device can have its own
>>>> device features which are subset of what is supported by the mgmtdev.
>>> Yep.
>>>>
>>>>>
>>>>> On the migration destination node, the parent device does support
>>>>> all features as the source offers, including CTRL_MAC_ADDR. What
>>>>> device features you would expect the mgmt software to create
>>>>> destination vdpa device with, if not otherwise requiring mgmt
>>>>> software to remember all the arguments on device creation?
>>>> So the provisioning in the destination should use exactly the same
>>>> device_feautres as what the vdpa device has in the source. But before
>>>> this, management layer should guarantee to provision a vDPA device
>>>> whose device_features can be supported on the destination in order to
>>>> allow live migration.
>>> Exactly.
>>>>
>>>>> So in this example, we need use "dev_features" so we get exact the
>>>>> same features after and operation as either src or dst.
>>>>>
>>>>> If the device_features vDPA created with at the source doesn't
>>>>> include CTRL_MAC_ADDR even though parent supports it, then the
>>>>> vDPA to be created at the destination shouldn't come with
>>>>> CTRL_MAC_ADDR either, regardless of whether or not CTRL_MAC_ADDR
>>>>> is present in destination "mgmtdev show".
>>>>>
>>>>> However, if just taking look at negotiated_features, some mgmt
>>>>> software implementations which don't persist the creation
>>>>> parameters can't get the device features a certain vDPA device at
>>>>> the source node was created with.
>>>>>
>>>>>
>>>>> SOURCE# vdpa mgmtdev show
>>>>> vdpasim_net:
>>>>> supported_classes net
>>>>> max_supported_vqs 3
>>>>> dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT
>>>>> VERSION_1 ACCESS_PLATFORM
>>>>> SOURCE# vdpa dev config show
>>>>> dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
>>>>> negotiated_features MTU MAC CTRL_VQ VERSION_1 ACCESS_PLATFORM
>>>>>
>>>>> DESTINATION# vdpa mgmtdev show
>>>>> vdpasim_net:
>>>>> supported_classes net
>>>>> max_supported_vqs 3
>>>>> dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT
>>>>> VERSION_1 ACCESS_PLATFORM
>>>>>
>>>>> But it should be sufficient to
>>>>> use features_src & feature_dst in this case. Actually, it should work
>>>>> similar as to the cpu flags, the management software should introduce
>>>>> the concept of cluster which means the maximal set of common features
>>>>> is calculated and provisioned during device creation to allow
>>>>> migration among the nodes inside the cluster.
>>>>>
>>>>> Yes, this is one way mgmt software may implement, but I am not
>>>>> sure if it's the only way. For e.g. for cpu flags, mgmt software
>>>>> can infer the guest cpus features in use from all qemu command
>>>>> line arguments and host cpu features/capability, which doesn't
>>>>> need to remember creation arguments and is easy to recover from
>>>>> failure without having to make the VM config persistent in data
>>>>> store. I thought it would be great if vdpa CLI design could offer
>>>>> the same.
>>>>>
>>>>> One minor difference is that we have cpu model abstraction, so we can
>>>>> have things like:
>>>>>
>>>>> ./qemu-system-x86_64 -cpu EPYC
>>>>>
>>>>> Which implies the cpu features/flags where vDPA doesn't have. But
>>>>> consider it's just a 64bit (or 128 in the future), it doesn't
>>>>> seems to
>>>>> be too complex for the management to know, we probably need to start
>>>>> from this and then we can try to introduce some generation/model
>>>>> after
>>>>> it is agreed on most of the vendors.
>>>>>
>>>>> What you refer to is the so-called named model for CPU flags. I
>>>>> think it's a good addition to have some generation or named model
>>>>> defined for vDPA. But I don't get the point for how it relates to
>>>>> exposing the actual value of device features? Are you saying in
>>>>> this case you'd rather expose the model name than the actual value
>>>>> of feature bits? Well, I think we can expose both in different
>>>>> fields when there's really such a need.
>>>> It's something like:
>>>>
>>>> vdpa dev add name dev1 mgmtdev vdpasim_net device_features
>>>> VDPA_NET_MODEL_1
>>>>
>>>> and VDPA_NET_MODEL_1 implies some feature sets.
>>>
>>> Not sure if this could be very useful for virtio devices, given we
>>> don't have a determined set of virtio features unlike CPU
>>> generation/model, but I think even with the features_default
>>> property we can still achieve that.
>>>
>>> -Siwei
>>
>>
>> Yes.
> Let me get some time to implement and post the relevant patches
> (mostly in iproute) later. Basically this would supplement those
> config attributes introduced through the 'vdpa dev show' series below
> [1] with provisioned device features to reference:
>
> [1]
> https://lore.kernel.org/virtualization/1665793690-28120-1-git-send-email-si-wei.liu@oracle.com/
>
>
> Thanks,
> -Siwei
>
>>
>> Thanks
>>
>>
>>>
>>>>
>>>>> BTW with regard to the cpu model in mgmt software implementation,
>>>>> the one implemented in libvirt is a mixed "Host model" [1] with
>>>>> taking advantage of QEMU named model and exposing additional
>>>>> individual CPU features that gets close to what host CPU offers.
>>>> So creating vDPA device without "device_features" is somehow the host
>>>> model, it will have all features that is supported by the parent.
>>>>
>>>>> I think this implies that mgmt software should have to understand
>>>>> what the model name really means in terms of individual CPU
>>>>> features, so having feature bit value exposed will just do more
>>>>> help if vDPA goes the same way.
>>>> Exactly.
>>>>
>>>> Thanks
>>>>
>>>>>
>>>>> Regards,
>>>>> -Siwei
>>>>>
>>>>> [1]
>>>>> https://qemu-project.gitlab.io/qemu/system/qemu-cpu-models.html#two-ways-to-configure-cpu-models-with-qemu-kvm
>>>>>
>>>>>
>>>>> Thanks
>>>>>
>>>>> Thanks,
>>>>> -Siwei
>>>>>
>>>>>
>>>>> Thanks
>>>>>
>>>>> Thanks,
>>>>> -Siwei
>>>>>
>>>>>
>>>>> 2) provision vDPA device with a subset of the features
>>>>>
>>>>> # vdpa dev add name dev1 mgmtdev vdpasim_net device_features
>>>>> 0x300020000
>>>>> # vdpa dev config show
>>>>> dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
>>>>> negotiated_features CTRL_VQ VERSION_1 ACCESS_PLATFORM
>>>>>
>>>>> Reviewed-by: Eli Cohen <elic@nvidia.com>
>>>>> Signed-off-by: Jason Wang <jasowang@redhat.com>
>>>>> ---
>>>>> drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 11 ++++++++++-
>>>>> 1 file changed, 10 insertions(+), 1 deletion(-)
>>>>>
>>>>> diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
>>>>> b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
>>>>> index 886449e88502..a9ba02be378b 100644
>>>>> --- a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
>>>>> +++ b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
>>>>> @@ -254,6 +254,14 @@ static int vdpasim_net_dev_add(struct
>>>>> vdpa_mgmt_dev *mdev, const char *name,
>>>>> dev_attr.work_fn = vdpasim_net_work;
>>>>> dev_attr.buffer_size = PAGE_SIZE;
>>>>>
>>>>> + if (config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) {
>>>>> + if (config->device_features &
>>>>> + ~dev_attr.supported_features)
>>>>> + return -EINVAL;
>>>>> + dev_attr.supported_features &=
>>>>> + config->device_features;
>>>>> + }
>>>>> +
>>>>> simdev = vdpasim_create(&dev_attr);
>>>>> if (IS_ERR(simdev))
>>>>> return PTR_ERR(simdev);
>>>>> @@ -294,7 +302,8 @@ static struct vdpa_mgmt_dev mgmt_dev = {
>>>>> .id_table = id_table,
>>>>> .ops = &vdpasim_net_mgmtdev_ops,
>>>>> .config_attr_mask = (1 << VDPA_ATTR_DEV_NET_CFG_MACADDR |
>>>>> - 1 << VDPA_ATTR_DEV_NET_CFG_MTU),
>>>>> + 1 << VDPA_ATTR_DEV_NET_CFG_MTU |
>>>>> + 1 << VDPA_ATTR_DEV_FEATURES),
>>>>> .max_supported_vqs = VDPASIM_NET_VQ_NUM,
>>>>> .supported_features = VDPASIM_NET_FEATURES,
>>>>> };
>>>>>
>>>>>
>>>>>
>>>
>>
>
_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
^ permalink raw reply [flat|nested] 55+ messages in thread
end of thread, other threads:[~2022-10-18 7:46 UTC | newest]
Thread overview: 55+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-09-22 2:43 [PATCH V2 0/3] vdpa: device feature provisioning Jason Wang
2022-09-22 2:43 ` Jason Wang
2022-09-22 2:43 ` [PATCH V2 1/3] " Jason Wang
2022-09-22 2:43 ` Jason Wang
2022-09-22 2:43 ` [PATCH V2 2/3] vdpa_sim_net: support " Jason Wang
2022-09-22 2:43 ` Jason Wang
2022-09-22 5:13 ` Eli Cohen
2022-09-22 7:29 ` Michael S. Tsirkin
2022-09-22 7:29 ` Michael S. Tsirkin
2022-09-22 7:47 ` Eli Cohen
2022-09-22 7:53 ` Michael S. Tsirkin
2022-09-22 7:53 ` Michael S. Tsirkin
2022-09-22 8:01 ` Eli Cohen
2022-09-22 9:11 ` Michael S. Tsirkin
2022-09-22 9:11 ` Michael S. Tsirkin
2022-09-23 4:17 ` Jason Wang
2022-09-23 4:17 ` Jason Wang
2022-09-23 4:20 ` Jason Wang
2022-09-23 4:20 ` Jason Wang
2022-09-22 9:22 ` Stefano Garzarella
2022-09-22 9:22 ` Stefano Garzarella
2022-09-23 3:33 ` Jason Wang
2022-09-23 3:33 ` Jason Wang
2022-09-23 20:01 ` Si-Wei Liu
2022-09-23 20:01 ` Si-Wei Liu
2022-09-26 7:11 ` Jason Wang
2022-09-26 7:11 ` Jason Wang
2022-09-26 7:11 ` Jason Wang
2022-09-26 7:11 ` Jason Wang
2022-09-27 1:01 ` Si-Wei Liu
2022-09-27 3:59 ` Jason Wang
2022-09-27 3:59 ` Jason Wang
2022-09-27 4:07 ` Jason Wang
2022-09-27 4:07 ` Jason Wang
2022-09-27 10:00 ` Si-Wei Liu
2022-09-29 4:10 ` Jason Wang
2022-09-29 4:10 ` Jason Wang
2022-10-10 17:44 ` Si-Wei Liu
2022-10-10 17:44 ` Si-Wei Liu
2022-09-27 9:41 ` Si-Wei Liu
2022-09-29 4:55 ` Jason Wang
2022-09-29 4:55 ` Jason Wang
2022-10-07 0:35 ` Si-Wei Liu
2022-10-07 0:35 ` Si-Wei Liu
2022-10-13 7:10 ` Jason Wang
2022-10-13 7:10 ` Jason Wang
2022-10-17 18:43 ` Si-Wei Liu
2022-10-18 7:45 ` Jason Wang
2022-10-18 7:45 ` Jason Wang
2022-09-22 2:43 ` [PATCH V2 3/3] vp_vdpa: " Jason Wang
2022-09-22 2:43 ` Jason Wang
2022-09-23 20:11 ` Si-Wei Liu
2022-09-23 20:11 ` Si-Wei Liu
2022-09-26 7:14 ` Jason Wang
2022-09-26 7:14 ` Jason Wang
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.