All of lore.kernel.org
 help / color / mirror / Atom feed
From: William Breathitt Gray <vilhelm.gray@gmail.com>
To: linus.walleij@linaro.org
Cc: akpm@linux-foundation.org, linux-gpio@vger.kernel.org,
	linux-arch@vger.kernel.org, linux-kernel@vger.kernel.org,
	andriy.shevchenko@linux.intel.com, linux@rasmusvillemoes.dk,
	yamada.masahiro@socionext.com, bgolaszewski@baylibre.com,
	linux-arm-kernel@lists.infradead.org,
	William Breathitt Gray <vilhelm.gray@gmail.com>
Subject: [PATCH v10 10/10] thermal: intel: intel_soc_dts_iosf: Utilize for_each_set_clump8 macro
Date: Thu, 14 Mar 2019 21:32:57 +0900	[thread overview]
Message-ID: <a240216a143782e3cfecf6f963578067b68b6007.1552566114.git.vilhelm.gray@gmail.com> (raw)
In-Reply-To: <cover.1552566113.git.vilhelm.gray@gmail.com>

Utilize for_each_set_clump8 macro, and the bitmap_set_value8 and
bitmap_get_value8 functions, where appropriate. In addition, remove the
now unnecessary temp_mask and temp_shift members of the
intel_soc_dts_sensor_entry structure.

Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
---
 drivers/thermal/intel/intel_soc_dts_iosf.c | 29 +++++++++++++---------
 drivers/thermal/intel/intel_soc_dts_iosf.h |  2 --
 2 files changed, 17 insertions(+), 14 deletions(-)

diff --git a/drivers/thermal/intel/intel_soc_dts_iosf.c b/drivers/thermal/intel/intel_soc_dts_iosf.c
index e0813dfaa278..b66f554670f7 100644
--- a/drivers/thermal/intel/intel_soc_dts_iosf.c
+++ b/drivers/thermal/intel/intel_soc_dts_iosf.c
@@ -15,6 +15,7 @@
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
+#include <linux/bitops.h>
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
@@ -111,6 +112,7 @@ static int update_trip_temp(struct intel_soc_dts_sensor_entry *dts,
 {
 	int status;
 	u32 temp_out;
+	unsigned long update_ptps;
 	u32 out;
 	u32 store_ptps;
 	u32 store_ptmc;
@@ -129,8 +131,9 @@ static int update_trip_temp(struct intel_soc_dts_sensor_entry *dts,
 	if (status)
 		return status;
 
-	out = (store_ptps & ~(0xFF << (thres_index * 8)));
-	out |= (temp_out & 0xFF) << (thres_index * 8);
+	update_ptps = store_ptps;
+	bitmap_set_value8(&update_ptps, 32, temp_out & 0xFF, thres_index * 8);
+	out = update_ptps;
 	status = iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_REG_WRITE,
 				SOC_DTS_OFFSET_PTPS, out);
 	if (status)
@@ -232,6 +235,7 @@ static int sys_get_curr_temp(struct thermal_zone_device *tzd,
 	u32 out;
 	struct intel_soc_dts_sensor_entry *dts;
 	struct intel_soc_dts_sensors *sensors;
+	unsigned long temp_raw;
 
 	dts = tzd->devdata;
 	sensors = dts->sensors;
@@ -240,7 +244,8 @@ static int sys_get_curr_temp(struct thermal_zone_device *tzd,
 	if (status)
 		return status;
 
-	out = (out & dts->temp_mask) >> dts->temp_shift;
+	temp_raw = out;
+	out = bitmap_get_value8(&temp_raw, 32, dts->id * 8);
 	out -= SOC_DTS_TJMAX_ENCODING;
 	*temp = sensors->tj_max - out * 1000;
 
@@ -290,10 +295,13 @@ static int add_dts_thermal_zone(int id, struct intel_soc_dts_sensor_entry *dts,
 {
 	char name[10];
 	int trip_count = 0;
+	int writable_trip_count = 0;
 	int trip_mask = 0;
 	u32 store_ptps;
 	int ret;
-	int i;
+	unsigned int i;
+	unsigned long trip;
+	unsigned long ptps;
 
 	/* Store status to restor on exit */
 	ret = iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ,
@@ -302,11 +310,10 @@ static int add_dts_thermal_zone(int id, struct intel_soc_dts_sensor_entry *dts,
 		goto err_ret;
 
 	dts->id = id;
-	dts->temp_mask = 0x00FF << (id * 8);
-	dts->temp_shift = id * 8;
 	if (notification_support) {
 		trip_count = min(SOC_MAX_DTS_TRIPS, trip_cnt);
-		trip_mask = BIT(trip_count - read_only_trip_cnt) - 1;
+		writable_trip_count = trip_count - read_only_trip_cnt;
+		trip_mask = GENMASK(writable_trip_count - 1, 0);
 	}
 
 	/* Check if the writable trip we provide is not used by BIOS */
@@ -315,11 +322,9 @@ static int add_dts_thermal_zone(int id, struct intel_soc_dts_sensor_entry *dts,
 	if (ret)
 		trip_mask = 0;
 	else {
-		for (i = 0; i < trip_count; ++i) {
-			if (trip_mask & BIT(i))
-				if (store_ptps & (0xff << (i * 8)))
-					trip_mask &= ~BIT(i);
-		}
+		ptps = store_ptps;
+		for_each_set_clump8(i, trip, ptps, writable_trip_count * 8)
+			trip_mask &= ~BIT(i / 8);
 	}
 	dts->trip_mask = trip_mask;
 	dts->trip_count = trip_count;
diff --git a/drivers/thermal/intel/intel_soc_dts_iosf.h b/drivers/thermal/intel/intel_soc_dts_iosf.h
index 625e37bf93dc..d0362d7acdef 100644
--- a/drivers/thermal/intel/intel_soc_dts_iosf.h
+++ b/drivers/thermal/intel/intel_soc_dts_iosf.h
@@ -33,8 +33,6 @@ struct intel_soc_dts_sensors;
 
 struct intel_soc_dts_sensor_entry {
 	int id;
-	u32 temp_mask;
-	u32 temp_shift;
 	u32 store_status;
 	u32 trip_mask;
 	u32 trip_count;
-- 
2.21.0

WARNING: multiple messages have this Message-ID (diff)
From: William Breathitt Gray <vilhelm.gray@gmail.com>
To: linus.walleij@linaro.org
Cc: linux-arch@vger.kernel.org, yamada.masahiro@socionext.com,
	linux@rasmusvillemoes.dk, linux-kernel@vger.kernel.org,
	William Breathitt Gray <vilhelm.gray@gmail.com>,
	linux-gpio@vger.kernel.org, bgolaszewski@baylibre.com,
	akpm@linux-foundation.org, andriy.shevchenko@linux.intel.com,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v10 10/10] thermal: intel: intel_soc_dts_iosf: Utilize for_each_set_clump8 macro
Date: Thu, 14 Mar 2019 21:32:57 +0900	[thread overview]
Message-ID: <a240216a143782e3cfecf6f963578067b68b6007.1552566114.git.vilhelm.gray@gmail.com> (raw)
In-Reply-To: <cover.1552566113.git.vilhelm.gray@gmail.com>

Utilize for_each_set_clump8 macro, and the bitmap_set_value8 and
bitmap_get_value8 functions, where appropriate. In addition, remove the
now unnecessary temp_mask and temp_shift members of the
intel_soc_dts_sensor_entry structure.

Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
---
 drivers/thermal/intel/intel_soc_dts_iosf.c | 29 +++++++++++++---------
 drivers/thermal/intel/intel_soc_dts_iosf.h |  2 --
 2 files changed, 17 insertions(+), 14 deletions(-)

diff --git a/drivers/thermal/intel/intel_soc_dts_iosf.c b/drivers/thermal/intel/intel_soc_dts_iosf.c
index e0813dfaa278..b66f554670f7 100644
--- a/drivers/thermal/intel/intel_soc_dts_iosf.c
+++ b/drivers/thermal/intel/intel_soc_dts_iosf.c
@@ -15,6 +15,7 @@
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
+#include <linux/bitops.h>
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
@@ -111,6 +112,7 @@ static int update_trip_temp(struct intel_soc_dts_sensor_entry *dts,
 {
 	int status;
 	u32 temp_out;
+	unsigned long update_ptps;
 	u32 out;
 	u32 store_ptps;
 	u32 store_ptmc;
@@ -129,8 +131,9 @@ static int update_trip_temp(struct intel_soc_dts_sensor_entry *dts,
 	if (status)
 		return status;
 
-	out = (store_ptps & ~(0xFF << (thres_index * 8)));
-	out |= (temp_out & 0xFF) << (thres_index * 8);
+	update_ptps = store_ptps;
+	bitmap_set_value8(&update_ptps, 32, temp_out & 0xFF, thres_index * 8);
+	out = update_ptps;
 	status = iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_REG_WRITE,
 				SOC_DTS_OFFSET_PTPS, out);
 	if (status)
@@ -232,6 +235,7 @@ static int sys_get_curr_temp(struct thermal_zone_device *tzd,
 	u32 out;
 	struct intel_soc_dts_sensor_entry *dts;
 	struct intel_soc_dts_sensors *sensors;
+	unsigned long temp_raw;
 
 	dts = tzd->devdata;
 	sensors = dts->sensors;
@@ -240,7 +244,8 @@ static int sys_get_curr_temp(struct thermal_zone_device *tzd,
 	if (status)
 		return status;
 
-	out = (out & dts->temp_mask) >> dts->temp_shift;
+	temp_raw = out;
+	out = bitmap_get_value8(&temp_raw, 32, dts->id * 8);
 	out -= SOC_DTS_TJMAX_ENCODING;
 	*temp = sensors->tj_max - out * 1000;
 
@@ -290,10 +295,13 @@ static int add_dts_thermal_zone(int id, struct intel_soc_dts_sensor_entry *dts,
 {
 	char name[10];
 	int trip_count = 0;
+	int writable_trip_count = 0;
 	int trip_mask = 0;
 	u32 store_ptps;
 	int ret;
-	int i;
+	unsigned int i;
+	unsigned long trip;
+	unsigned long ptps;
 
 	/* Store status to restor on exit */
 	ret = iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ,
@@ -302,11 +310,10 @@ static int add_dts_thermal_zone(int id, struct intel_soc_dts_sensor_entry *dts,
 		goto err_ret;
 
 	dts->id = id;
-	dts->temp_mask = 0x00FF << (id * 8);
-	dts->temp_shift = id * 8;
 	if (notification_support) {
 		trip_count = min(SOC_MAX_DTS_TRIPS, trip_cnt);
-		trip_mask = BIT(trip_count - read_only_trip_cnt) - 1;
+		writable_trip_count = trip_count - read_only_trip_cnt;
+		trip_mask = GENMASK(writable_trip_count - 1, 0);
 	}
 
 	/* Check if the writable trip we provide is not used by BIOS */
@@ -315,11 +322,9 @@ static int add_dts_thermal_zone(int id, struct intel_soc_dts_sensor_entry *dts,
 	if (ret)
 		trip_mask = 0;
 	else {
-		for (i = 0; i < trip_count; ++i) {
-			if (trip_mask & BIT(i))
-				if (store_ptps & (0xff << (i * 8)))
-					trip_mask &= ~BIT(i);
-		}
+		ptps = store_ptps;
+		for_each_set_clump8(i, trip, ptps, writable_trip_count * 8)
+			trip_mask &= ~BIT(i / 8);
 	}
 	dts->trip_mask = trip_mask;
 	dts->trip_count = trip_count;
diff --git a/drivers/thermal/intel/intel_soc_dts_iosf.h b/drivers/thermal/intel/intel_soc_dts_iosf.h
index 625e37bf93dc..d0362d7acdef 100644
--- a/drivers/thermal/intel/intel_soc_dts_iosf.h
+++ b/drivers/thermal/intel/intel_soc_dts_iosf.h
@@ -33,8 +33,6 @@ struct intel_soc_dts_sensors;
 
 struct intel_soc_dts_sensor_entry {
 	int id;
-	u32 temp_mask;
-	u32 temp_shift;
 	u32 store_status;
 	u32 trip_mask;
 	u32 trip_count;
-- 
2.21.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2019-03-14 12:32 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-03-14 12:29 [PATCH v10 00/10] Introduce the for_each_set_clump8 macro William Breathitt Gray
2019-03-14 12:29 ` William Breathitt Gray
2019-03-14 12:30 ` [PATCH v10 01/10] bitops: " William Breathitt Gray
2019-03-14 12:30   ` William Breathitt Gray
2019-03-22 18:22   ` Andy Shevchenko
2019-03-22 18:22     ` Andy Shevchenko
2019-03-14 12:30 ` [PATCH v10 02/10] lib/test_bitmap.c: Add for_each_set_clump8 test cases William Breathitt Gray
2019-03-14 12:30   ` William Breathitt Gray
2019-03-14 12:30 ` [PATCH v10 03/10] gpio: 104-dio-48e: Utilize for_each_set_clump8 macro William Breathitt Gray
2019-03-14 12:30   ` William Breathitt Gray
2019-03-14 12:30 ` [PATCH v10 04/10] gpio: 104-idi-48: " William Breathitt Gray
2019-03-14 12:30   ` William Breathitt Gray
2019-03-14 12:31 ` [PATCH v10 05/10] gpio: gpio-mm: " William Breathitt Gray
2019-03-14 12:31   ` William Breathitt Gray
2019-03-14 12:31 ` [PATCH v10 06/10] gpio: ws16c48: " William Breathitt Gray
2019-03-14 12:31   ` William Breathitt Gray
2019-03-14 12:31 ` [PATCH v10 07/10] gpio: pci-idio-16: " William Breathitt Gray
2019-03-14 12:31   ` William Breathitt Gray
2019-03-14 12:32 ` [PATCH v10 08/10] gpio: pcie-idio-24: " William Breathitt Gray
2019-03-14 12:32   ` William Breathitt Gray
2019-03-14 12:32 ` [PATCH v10 09/10] gpio: uniphier: " William Breathitt Gray
2019-03-14 12:32   ` William Breathitt Gray
2019-03-14 12:53   ` William Breathitt Gray
2019-03-14 12:53     ` William Breathitt Gray
2019-03-14 12:32 ` William Breathitt Gray [this message]
2019-03-14 12:32   ` [PATCH v10 10/10] thermal: intel: intel_soc_dts_iosf: " William Breathitt Gray
2019-03-14 14:26   ` Andy Shevchenko
2019-03-14 14:26     ` Andy Shevchenko
2019-03-14 14:39     ` William Breathitt Gray
2019-03-14 14:39       ` William Breathitt Gray
2019-03-22 19:02   ` Andy Shevchenko
2019-03-22 19:02     ` Andy Shevchenko
2019-03-24  3:38     ` William Breathitt Gray
2019-03-24  3:38       ` William Breathitt Gray
2019-03-24 13:52       ` Andy Shevchenko
2019-03-24 13:52         ` Andy Shevchenko
2019-03-24 13:52         ` Andy Shevchenko
2019-03-22 19:12 ` [PATCH v10 00/10] Introduce the " Andy Shevchenko
2019-03-22 19:12   ` Andy Shevchenko
2019-03-24  4:08   ` William Breathitt Gray
2019-03-24  4:08     ` William Breathitt Gray
2019-03-24  4:08     ` William Breathitt Gray
2019-03-24  8:53     ` Geert Uytterhoeven
2019-03-24  8:53       ` Geert Uytterhoeven
2019-03-24 12:08     ` Andy Shevchenko
2019-03-24 12:08       ` Andy Shevchenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=a240216a143782e3cfecf6f963578067b68b6007.1552566114.git.vilhelm.gray@gmail.com \
    --to=vilhelm.gray@gmail.com \
    --cc=akpm@linux-foundation.org \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=bgolaszewski@baylibre.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arch@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@rasmusvillemoes.dk \
    --cc=yamada.masahiro@socionext.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.