* [OpenRISC] Installing gcc commpiler on openrisc linux @ 2016-08-24 23:03 Manaar Alam 2016-08-24 23:44 ` Stafford Horne 0 siblings, 1 reply; 7+ messages in thread From: Manaar Alam @ 2016-08-24 23:03 UTC (permalink / raw) To: openrisc Hello, I have managed to boot Linux on de0-nano board with openrisc. But the problem is, this linux image doesn't have any C Compiler in it. How to install C compiler on the linux? -- *Manaar Alam,* Junior Research Fellow, Department of Computer Science and Engineering, Indian Institute of Technology, Kharagpur, West Bengal, India. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.librecores.org/pipermail/openrisc/attachments/20160825/a7331f18/attachment.html> ^ permalink raw reply [flat|nested] 7+ messages in thread
* [OpenRISC] Installing gcc commpiler on openrisc linux 2016-08-24 23:03 [OpenRISC] Installing gcc commpiler on openrisc linux Manaar Alam @ 2016-08-24 23:44 ` Stafford Horne 2016-08-25 7:03 ` Jeremy Bennett ` (2 more replies) 0 siblings, 3 replies; 7+ messages in thread From: Stafford Horne @ 2016-08-24 23:44 UTC (permalink / raw) To: openrisc Hello Manaar, The openrisc Linux build creates an image with all the tools provided using busybox (it's in the kernel source tree). So it's basically a busybox embedded system. You can Google about adding gcc or another c compiler to busybox for details. I don't think it's been done before. Gcc is rather large for de0 nano ;it's not just gcc but linkers and assemblers and libraries you would want to link in. However, I wouldnt bet it's impossible if you strip it down. -Stafford On 25 Aug 2016 8:03 a.m., "Manaar Alam" <alam.manaar@gmail.com> wrote: > Hello, > > I have managed to boot Linux on de0-nano board with openrisc. But the > problem is, this linux image doesn't have any C Compiler in it. How to > install C compiler on the linux? > > -- > *Manaar Alam,* > Junior Research Fellow, > Department of Computer Science and Engineering, > Indian Institute of Technology, Kharagpur, > West Bengal, India. > > _______________________________________________ > OpenRISC mailing list > OpenRISC at lists.librecores.org > https://lists.librecores.org/listinfo/openrisc > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.librecores.org/pipermail/openrisc/attachments/20160825/1db571ea/attachment.html> ^ permalink raw reply [flat|nested] 7+ messages in thread
* [OpenRISC] Installing gcc commpiler on openrisc linux 2016-08-24 23:44 ` Stafford Horne @ 2016-08-25 7:03 ` Jeremy Bennett 2016-08-25 7:13 ` Stefan Wallentowitz [not found] ` <CAFoY_ww=jonkgne6xTis6EvGLJFGTnw_O=HEhCbNZnvQFutO8A@mail.gmail.com> 2 siblings, 0 replies; 7+ messages in thread From: Jeremy Bennett @ 2016-08-25 7:03 UTC (permalink / raw) To: openrisc On 25/08/16 01:44, Stafford Horne wrote: > Hello Manaar, > > The openrisc Linux build creates an image with all the tools provided > using busybox (it's in the kernel source tree). So it's basically a > busybox embedded system. You can Google about adding gcc or another c > compiler to busybox for details. > > I don't think it's been done before. Gcc is rather large for de0 nano > ;it's not just gcc but linkers and assemblers and libraries you would > want to link in. However, I wouldnt bet it's impossible if you strip it > down. Hi Manaar, I think you'll struggle to get GCC to work on the DE0-Nano, and even if you could it would be dreadfully slow. Getting modern GCC to work on anything with less than 1GB is pretty hard. The usual way of running the OpenRISC tool chain is as a cross-compiler on a PC. HTH, Jeremy > > -Stafford > > > On 25 Aug 2016 8:03 a.m., "Manaar Alam" <alam.manaar@gmail.com > <mailto:alam.manaar@gmail.com>> wrote: > > Hello, > > I have managed to boot Linux on de0-nano board with openrisc. But > the problem is, this linux image doesn't have any C Compiler in it. > How to install C compiler on the linux? > > -- > *Manaar Alam,* > Junior Research Fellow, > Department of Computer Science and Engineering, > Indian Institute of Technology, Kharagpur, > West Bengal, India. > > _______________________________________________ > OpenRISC mailing list > OpenRISC at lists.librecores.org <mailto:OpenRISC@lists.librecores.org> > https://lists.librecores.org/listinfo/openrisc > <https://lists.librecores.org/listinfo/openrisc> > > > > _______________________________________________ > OpenRISC mailing list > OpenRISC at lists.librecores.org > https://lists.librecores.org/listinfo/openrisc > -- Tel: +44 (1590) 610184 Cell: +44 (7970) 676050 SkypeID: jeremybennett Twitter: @jeremypbennett Email: jeremy.bennett at embecosm.com Web: www.embecosm.com PGP key: 1024D/BEF58172FB4754E1 2009-03-20 -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 181 bytes Desc: OpenPGP digital signature URL: <http://lists.librecores.org/pipermail/openrisc/attachments/20160825/2fccc6bc/attachment.sig> ^ permalink raw reply [flat|nested] 7+ messages in thread
* [OpenRISC] Installing gcc commpiler on openrisc linux 2016-08-24 23:44 ` Stafford Horne 2016-08-25 7:03 ` Jeremy Bennett @ 2016-08-25 7:13 ` Stefan Wallentowitz 2016-08-25 7:15 ` Stafford Horne [not found] ` <CAFoY_ww=jonkgne6xTis6EvGLJFGTnw_O=HEhCbNZnvQFutO8A@mail.gmail.com> 2 siblings, 1 reply; 7+ messages in thread From: Stefan Wallentowitz @ 2016-08-25 7:13 UTC (permalink / raw) To: openrisc On 25.08.2016 01:44, Stafford Horne wrote: > Hello Manaar, > > The openrisc Linux build creates an image with all the tools provided > using busybox (it's in the kernel source tree). So it's basically a > busybox embedded system. You can Google about adding gcc or another c > compiler to busybox for details. > > I don't think it's been done before. Gcc is rather large for de0 nano > ;it's not just gcc but linkers and assemblers and libraries you would > want to link in. However, I wouldnt bet it's impossible if you strip it > down. > > -Stafford Hi Manaar, just to add to this and Jeremy's comment: It is not the standard way to compile inside the target system. Instead you cross-compile on your host and transfer the binary ELF to the target. I am not sure if the tutorial already covers adding files to the ramdisk (the image you load onto the target). Stafford, you are the expert on this, right? Cheers, Stefan -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 181 bytes Desc: OpenPGP digital signature URL: <http://lists.librecores.org/pipermail/openrisc/attachments/20160825/e9322d03/attachment.sig> ^ permalink raw reply [flat|nested] 7+ messages in thread
* [OpenRISC] Installing gcc commpiler on openrisc linux 2016-08-25 7:13 ` Stefan Wallentowitz @ 2016-08-25 7:15 ` Stafford Horne 0 siblings, 0 replies; 7+ messages in thread From: Stafford Horne @ 2016-08-25 7:15 UTC (permalink / raw) To: openrisc Hello, There are two ways. 1. When building the Linux kernel you can place any files you want under /arch <https://github.com/openrisc/linux/tree/master/arch>/openrisc <https://github.com/openrisc/linux/tree/master/arch/openrisc>/support <https://github.com/openrisc/linux/tree/master/arch/openrisc/support>/ *initramfs* and they will be there when you buy the system. 2. Not got this working myself When you connect to your serial terminal there are ways to transfer through the serial connection. You can maybe get builds of zmodem working there. -Stafford On 25 Aug 2016 4:13 p.m., "Stefan Wallentowitz" <stefan@wallentowitz.de> wrote: > On 25.08.2016 01:44, Stafford Horne wrote: > > Hello Manaar, > > > > The openrisc Linux build creates an image with all the tools provided > > using busybox (it's in the kernel source tree). So it's basically a > > busybox embedded system. You can Google about adding gcc or another c > > compiler to busybox for details. > > > > I don't think it's been done before. Gcc is rather large for de0 nano > > ;it's not just gcc but linkers and assemblers and libraries you would > > want to link in. However, I wouldnt bet it's impossible if you strip it > > down. > > > > -Stafford > > Hi Manaar, > > just to add to this and Jeremy's comment: It is not the standard way to > compile inside the target system. Instead you cross-compile on your host > and transfer the binary ELF to the target. > > I am not sure if the tutorial already covers adding files to the ramdisk > (the image you load onto the target). Stafford, you are the expert on > this, right? > > Cheers, > Stefan > > > > _______________________________________________ > OpenRISC mailing list > OpenRISC at lists.librecores.org > https://lists.librecores.org/listinfo/openrisc > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.librecores.org/pipermail/openrisc/attachments/20160825/12fafe83/attachment.html> ^ permalink raw reply [flat|nested] 7+ messages in thread
[parent not found: <CAFoY_ww=jonkgne6xTis6EvGLJFGTnw_O=HEhCbNZnvQFutO8A@mail.gmail.com>]
[parent not found: <CAAfxs77h1CeyF2awfWOrKDdGmVW2aGinJPAF_CatfMF4KdWKLg@mail.gmail.com>]
* [OpenRISC] Installing gcc commpiler on openrisc linux [not found] ` <CAAfxs77h1CeyF2awfWOrKDdGmVW2aGinJPAF_CatfMF4KdWKLg@mail.gmail.com> @ 2016-08-25 7:19 ` Stafford Horne 2016-08-25 8:15 ` Jeremy Bennett 0 siblings, 1 reply; 7+ messages in thread From: Stafford Horne @ 2016-08-25 7:19 UTC (permalink / raw) To: openrisc +cc Mailing list. On 25 Aug 2016 3:50 p.m., "Stafford Horne" <shorne@gmail.com> wrote: > Hello, > > There are two ways. > > 1. > When building the Linux kernel you can place any files you want under / > arch <https://github.com/openrisc/linux/tree/master/arch>/openrisc > <https://github.com/openrisc/linux/tree/master/arch/openrisc>/support > <https://github.com/openrisc/linux/tree/master/arch/openrisc/support>/ > *initramfs* and they will be there when you buy the system. > > 2. > When you connect to your serial terminal there are ways to transfer > through the serial connection. You can maybe get builds of zmodem working > there. > > -Stafford > > On 25 Aug 2016 2:47 p.m., "Manaar Alam" <alam.manaar@gmail.com> wrote: > >> Hello Sir, >> >> Can I transfer any executable file from my Ubuntu system to the Linux on >> de0_nano? >> If that is possible then gcc won't be required. >> Any suggestion from you will be very helpful for me. >> >> Thanks and regards, >> >> On Thu, Aug 25, 2016 at 5:14 AM, Stafford Horne <shorne@gmail.com> wrote: >> >>> Hello Manaar, >>> >>> The openrisc Linux build creates an image with all the tools provided >>> using busybox (it's in the kernel source tree). So it's basically a busybox >>> embedded system. You can Google about adding gcc or another c compiler to >>> busybox for details. >>> >>> I don't think it's been done before. Gcc is rather large for de0 nano >>> ;it's not just gcc but linkers and assemblers and libraries you would want >>> to link in. However, I wouldnt bet it's impossible if you strip it down. >>> >>> -Stafford >>> >>> On 25 Aug 2016 8:03 a.m., "Manaar Alam" <alam.manaar@gmail.com> wrote: >>> >>>> Hello, >>>> >>>> I have managed to boot Linux on de0-nano board with openrisc. But the >>>> problem is, this linux image doesn't have any C Compiler in it. How to >>>> install C compiler on the linux? >>>> >>>> -- >>>> *Manaar Alam,* >>>> Junior Research Fellow, >>>> Department of Computer Science and Engineering, >>>> Indian Institute of Technology, Kharagpur, >>>> West Bengal, India. >>>> >>>> _______________________________________________ >>>> OpenRISC mailing list >>>> OpenRISC at lists.librecores.org >>>> https://lists.librecores.org/listinfo/openrisc >>>> >>>> >> >> >> -- >> *Manaar Alam,* >> Junior Research Fellow, >> Department of Computer Science and Engineering, >> Indian Institute of Technology, Kharagpur, >> West Bengal, India. >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.librecores.org/pipermail/openrisc/attachments/20160825/fdbd8909/attachment.html> ^ permalink raw reply [flat|nested] 7+ messages in thread
* [OpenRISC] Installing gcc commpiler on openrisc linux 2016-08-25 7:19 ` Stafford Horne @ 2016-08-25 8:15 ` Jeremy Bennett 0 siblings, 0 replies; 7+ messages in thread From: Jeremy Bennett @ 2016-08-25 8:15 UTC (permalink / raw) To: openrisc Hi IIRC we used FTP and telnet when running GCC regression tests. You probably need to add this to the BusyBox build. You should also be able to get ssh/scp working, although I've never done it. BusyBox also supports NFS, although when I last looked (some years ago) it was only NFS 3, not NFS 4, which can cause difficulty, because they don't co-exist happily. HTH, Jeremy On 25/08/16 09:19, Stafford Horne wrote: > +cc Mailing list. > > > On 25 Aug 2016 3:50 p.m., "Stafford Horne" <shorne@gmail.com > <mailto:shorne@gmail.com>> wrote: > > Hello, > > There are two ways. > > 1. > When building the Linux kernel you can place any files you want > under /arch > <https://github.com/openrisc/linux/tree/master/arch>/openrisc > <https://github.com/openrisc/linux/tree/master/arch/openrisc>/support <https://github.com/openrisc/linux/tree/master/arch/openrisc/support>/*initramfs* > and they will be there when you buy the system. > > 2. > When you connect to your serial terminal there are ways to transfer > through the serial connection. You can maybe get builds of zmodem > working there. > > -Stafford > > > On 25 Aug 2016 2:47 p.m., "Manaar Alam" <alam.manaar@gmail.com > <mailto:alam.manaar@gmail.com>> wrote: > > Hello Sir, > > Can I transfer any executable file from my Ubuntu system to the > Linux on de0_nano? > If that is possible then gcc won't be required. > Any suggestion from you will be very helpful for me. > > Thanks and regards, > > On Thu, Aug 25, 2016 at 5:14 AM, Stafford Horne > <shorne at gmail.com <mailto:shorne@gmail.com>> wrote: > > Hello Manaar, > > The openrisc Linux build creates an image with all the tools > provided using busybox (it's in the kernel source tree). So > it's basically a busybox embedded system. You can Google > about adding gcc or another c compiler to busybox for details. > > I don't think it's been done before. Gcc is rather large for > de0 nano ;it's not just gcc but linkers and assemblers and > libraries you would want to link in. However, I wouldnt bet > it's impossible if you strip it down. > > -Stafford > > > On 25 Aug 2016 8:03 a.m., "Manaar Alam" > <alam.manaar at gmail.com <mailto:alam.manaar@gmail.com>> wrote: > > Hello, > > I have managed to boot Linux on de0-nano board with > openrisc. But the problem is, this linux image doesn't > have any C Compiler in it. How to install C compiler on > the linux? > > -- > *Manaar Alam,* > Junior Research Fellow, > Department of Computer Science and Engineering, > Indian Institute of Technology, Kharagpur, > West Bengal, India. > > _______________________________________________ > OpenRISC mailing list > OpenRISC at lists.librecores.org > <mailto:OpenRISC@lists.librecores.org> > https://lists.librecores.org/listinfo/openrisc > <https://lists.librecores.org/listinfo/openrisc> > > > > > -- > *Manaar Alam,* > Junior Research Fellow, > Department of Computer Science and Engineering, > Indian Institute of Technology, Kharagpur, > West Bengal, India. > > > > _______________________________________________ > OpenRISC mailing list > OpenRISC at lists.librecores.org > https://lists.librecores.org/listinfo/openrisc > -- Tel: +44 (1590) 610184 Cell: +44 (7970) 676050 SkypeID: jeremybennett Twitter: @jeremypbennett Email: jeremy.bennett at embecosm.com Web: www.embecosm.com PGP key: 1024D/BEF58172FB4754E1 2009-03-20 -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 181 bytes Desc: OpenPGP digital signature URL: <http://lists.librecores.org/pipermail/openrisc/attachments/20160825/4bb68049/attachment.sig> ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2016-08-25 8:15 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-08-24 23:03 [OpenRISC] Installing gcc commpiler on openrisc linux Manaar Alam
2016-08-24 23:44 ` Stafford Horne
2016-08-25 7:03 ` Jeremy Bennett
2016-08-25 7:13 ` Stefan Wallentowitz
2016-08-25 7:15 ` Stafford Horne
[not found] ` <CAFoY_ww=jonkgne6xTis6EvGLJFGTnw_O=HEhCbNZnvQFutO8A@mail.gmail.com>
[not found] ` <CAAfxs77h1CeyF2awfWOrKDdGmVW2aGinJPAF_CatfMF4KdWKLg@mail.gmail.com>
2016-08-25 7:19 ` Stafford Horne
2016-08-25 8:15 ` Jeremy Bennett
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.