All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rakesh Pillai <pillair@codeaurora.org>
To: Kalle Valo <kvalo@codeaurora.org>
Cc: ath10k@lists.infradead.org, linux-wireless@vger.kernel.org
Subject: Re: [PATCH] ath10k: Enable Factory Test Mode for WCN3990
Date: Fri, 08 Feb 2019 20:10:23 +0530	[thread overview]
Message-ID: <ab3140ba07ac91bc3729e9e2e31d9333@codeaurora.org> (raw)
In-Reply-To: <20190208141604.B2D266074F@smtp.codeaurora.org>

Hi Kalle,
I have checked the patch, and it is fine.

Thanks,
Rakesh Pillai.


On 2019-02-08 19:46, Kalle Valo wrote:
> Rakesh Pillai <pillair@codeaurora.org> wrote:
> 
>> The support to put WCN3990 firmware into Factory
>> test mode is not present currently. The WCN3990
>> firmware can operate in Factory test mode based
>> on the mode it receives in the wlan enable message
>> from the host driver.
>> 
>> When the host driver is started in testmode send
>> the operating mode as UTF mode, to the WCN3990
>> firmware, in the wlan enable message to start the
>> firmware in Factory test mode.
>> 
>> Tested on: WCN3990
>> Tested FW: WLAN.HL.2.0-01192-QCAHLSWMTPLZ-1.
>> 
>> Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
>> Reviewed-by: Brian Norris <briannorris@chromium.org>
>> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
> 
> I was able to apply with 3-way merge but please double check the 
> results:
> 
> https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git/commit/?h=pending&id=ef562f95826f412c14f59ca916ff55931bed0813
> 
> Applying: ath10k: Enable Factory Test Mode for WCN3990
> Using index info to reconstruct a base tree...
> M       drivers/net/wireless/ath/ath10k/ahb.c
> M       drivers/net/wireless/ath/ath10k/core.c
> M       drivers/net/wireless/ath/ath10k/hif.h
> M       drivers/net/wireless/ath/ath10k/mac.c
> M       drivers/net/wireless/ath/ath10k/pci.c
> M       drivers/net/wireless/ath/ath10k/sdio.c
> M       drivers/net/wireless/ath/ath10k/snoc.c
> M       drivers/net/wireless/ath/ath10k/usb.c
> Falling back to patching base and 3-way merge...
> Auto-merging drivers/net/wireless/ath/ath10k/usb.c
> Auto-merging drivers/net/wireless/ath/ath10k/snoc.c
> Auto-merging drivers/net/wireless/ath/ath10k/sdio.c
> Auto-merging drivers/net/wireless/ath/ath10k/pci.c
> Auto-merging drivers/net/wireless/ath/ath10k/mac.c
> Auto-merging drivers/net/wireless/ath/ath10k/hif.h
> Auto-merging drivers/net/wireless/ath/ath10k/core.c
> Auto-merging drivers/net/wireless/ath/ath10k/ahb.c

WARNING: multiple messages have this Message-ID (diff)
From: Rakesh Pillai <pillair@codeaurora.org>
To: Kalle Valo <kvalo@codeaurora.org>
Cc: linux-wireless@vger.kernel.org, ath10k@lists.infradead.org
Subject: Re: [PATCH] ath10k: Enable Factory Test Mode for WCN3990
Date: Fri, 08 Feb 2019 20:10:23 +0530	[thread overview]
Message-ID: <ab3140ba07ac91bc3729e9e2e31d9333@codeaurora.org> (raw)
In-Reply-To: <20190208141604.B2D266074F@smtp.codeaurora.org>

Hi Kalle,
I have checked the patch, and it is fine.

Thanks,
Rakesh Pillai.


On 2019-02-08 19:46, Kalle Valo wrote:
> Rakesh Pillai <pillair@codeaurora.org> wrote:
> 
>> The support to put WCN3990 firmware into Factory
>> test mode is not present currently. The WCN3990
>> firmware can operate in Factory test mode based
>> on the mode it receives in the wlan enable message
>> from the host driver.
>> 
>> When the host driver is started in testmode send
>> the operating mode as UTF mode, to the WCN3990
>> firmware, in the wlan enable message to start the
>> firmware in Factory test mode.
>> 
>> Tested on: WCN3990
>> Tested FW: WLAN.HL.2.0-01192-QCAHLSWMTPLZ-1.
>> 
>> Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
>> Reviewed-by: Brian Norris <briannorris@chromium.org>
>> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
> 
> I was able to apply with 3-way merge but please double check the 
> results:
> 
> https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git/commit/?h=pending&id=ef562f95826f412c14f59ca916ff55931bed0813
> 
> Applying: ath10k: Enable Factory Test Mode for WCN3990
> Using index info to reconstruct a base tree...
> M       drivers/net/wireless/ath/ath10k/ahb.c
> M       drivers/net/wireless/ath/ath10k/core.c
> M       drivers/net/wireless/ath/ath10k/hif.h
> M       drivers/net/wireless/ath/ath10k/mac.c
> M       drivers/net/wireless/ath/ath10k/pci.c
> M       drivers/net/wireless/ath/ath10k/sdio.c
> M       drivers/net/wireless/ath/ath10k/snoc.c
> M       drivers/net/wireless/ath/ath10k/usb.c
> Falling back to patching base and 3-way merge...
> Auto-merging drivers/net/wireless/ath/ath10k/usb.c
> Auto-merging drivers/net/wireless/ath/ath10k/snoc.c
> Auto-merging drivers/net/wireless/ath/ath10k/sdio.c
> Auto-merging drivers/net/wireless/ath/ath10k/pci.c
> Auto-merging drivers/net/wireless/ath/ath10k/mac.c
> Auto-merging drivers/net/wireless/ath/ath10k/hif.h
> Auto-merging drivers/net/wireless/ath/ath10k/core.c
> Auto-merging drivers/net/wireless/ath/ath10k/ahb.c

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

  parent reply	other threads:[~2019-02-08 14:40 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-08-29  7:00 [PATCH] ath10k: Enable Factory Test Mode for WCN3990 Rakesh Pillai
2018-08-29  7:00 ` Rakesh Pillai
2019-02-05  1:02 ` Brian Norris
2019-02-05  1:02   ` Brian Norris
2019-02-07 14:14   ` Kalle Valo
2019-02-07 14:14     ` Kalle Valo
2019-02-08 14:16 ` Kalle Valo
2019-02-08 14:16 ` Kalle Valo
     [not found] ` <20190208141604.B2D266074F@smtp.codeaurora.org>
2019-02-08 14:40   ` Rakesh Pillai [this message]
2019-02-08 14:40     ` Rakesh Pillai
2019-02-11 16:34 ` Kalle Valo
2019-02-11 16:34 ` Kalle Valo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ab3140ba07ac91bc3729e9e2e31d9333@codeaurora.org \
    --to=pillair@codeaurora.org \
    --cc=ath10k@lists.infradead.org \
    --cc=kvalo@codeaurora.org \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.