From: Stefano Stabellini <sstabellini@kernel.org> To: Stefano Stabellini <sstabellini@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com>, qemu-devel@nongnu.org, xen-devel@lists.xenproject.org, anthony.perard@citrix.com, groug@kaod.org, Stefano Stabellini <stefano@aporeto.com>, peter.maydell@linaro.org, rth@twiddle.net, stefanha@redhat.com Subject: Re: [Qemu-devel] [PATCH v2 1/9] configure: change CONFIG_XEN_BACKEND to be a target property Date: Tue, 14 Mar 2017 13:23:09 -0700 (PDT) [thread overview] Message-ID: <alpine.DEB.2.10.1703141318470.4807@sstabellini-ThinkPad-X260> (raw) In-Reply-To: <alpine.DEB.2.10.1703141201300.4807@sstabellini-ThinkPad-X260> On Tue, 14 Mar 2017, Stefano Stabellini wrote: > On Tue, 14 Mar 2017, Paolo Bonzini wrote: > > On 14/03/2017 00:55, Stefano Stabellini wrote: > > > CONFIG_XEN_BACKEND is currently set when the host supports Xen, > > > regardless of the chosen targets. As a consequence, Xen backends can be > > > enabled even on targets that don't support Xen. > > > > > > Fix the issue by setting CONFIG_XEN_BACKEND only for targets that > > > support Xen. > > > > > > Signed-off-by: Stefano Stabellini <stefano@aporeto.com> > > > CC: groug@kaod.org > > > CC: groug@kaod.org > > > CC: pbonzini@redhat.com > > > CC: peter.maydell@linaro.org > > > CC: rth@twiddle.net > > > CC: stefanha@redhat.com > > > --- > > > configure | 2 +- > > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > > > diff --git a/configure b/configure > > > index 6c21975..6d8f752 100755 > > > --- a/configure > > > +++ b/configure > > > @@ -5442,7 +5442,6 @@ if test "$virglrenderer" = "yes" ; then > > > echo "VIRGL_LIBS=$virgl_libs" >> $config_host_mak > > > fi > > > if test "$xen" = "yes" ; then > > > - echo "CONFIG_XEN_BACKEND=y" >> $config_host_mak > > > echo "CONFIG_XEN_CTRL_INTERFACE_VERSION=$xen_ctrl_version" >> $config_host_mak > > > if test "$xen_pv_domain_build" = "yes" ; then > > > echo "CONFIG_XEN_PV_DOMAIN_BUILD=y" >> $config_host_mak > > > @@ -6028,6 +6027,7 @@ case "$target_name" in > > > i386|x86_64) > > > if test "$xen" = "yes" -a "$target_softmmu" = "yes" ; then > > > echo "CONFIG_XEN=y" >> $config_target_mak > > > + echo "CONFIG_XEN_BACKEND=y" >> $config_target_mak > > > if test "$xen_pci_passthrough" = yes; then > > > echo "CONFIG_XEN_PCI_PASSTHROUGH=y" >> "$config_target_mak" > > > fi > > > > > > > This messes up a bit the way xen_nic.o and friends are compiled, I > > think, because they are common-obj-y but they are only found when > > compiling in the target subdirectories. So you end up building > > x86_64-softmmu/../hw/net/xen_nic.o > > > > If you're unlucky, I believe this can lead to a link failure where a > > target is building xen_nic.o, while the other tries to link to a > > partially written object file. > > > > I think the files should be changed from > > common-obj-$(CONFIG_XEN_BACKEND) to common-obj-$(CONFIG_XEN). > > > > The Makefile.objs change ensures that Xen backends are not enabled on > > targets that support Xen. > > Actually I thought about doing that instead of the configure change. It > makes sense to me. > > > > Then you add to Makefile: > > > > CONFIG_SOFTMMU := $(if $(filter %-softmmu,$(TARGET_DIRS)),y) > > CONFIG_USER_ONLY := $(if $(filter %-user,$(TARGET_DIRS)),y) > > +CONFIG_XEN := $(CONFIG_XEN_BACKEND) > > CONFIG_ALL=y > > -include config-all-devices.mak > > -include config-all-disas.mak > > > > The Makefile change ensures that they are built before descending in the > > target-specific directories. > > But I don't understand this. Please correct me if I am wrong, but this > change looks like it would end up setting CONFIG_XEN every time that > CONFIG_XEN_BACKEND is set. Without the configure change at the top, it > would end up setting CONFIG_XEN whenever the host supports Xen, even for > non-x86 and non-ARM targets. What am I missing? FYI I made the following changes: diff --git a/Makefile b/Makefile index 1c4c04f..b246138 100644 --- a/Makefile +++ b/Makefile @@ -26,6 +26,7 @@ endif CONFIG_SOFTMMU := $(if $(filter %-softmmu,$(TARGET_DIRS)),y) CONFIG_USER_ONLY := $(if $(filter %-user,$(TARGET_DIRS)),y) +CONFIG_XEN := $(CONFIG_XEN_BACKEND) CONFIG_ALL=y -include config-all-devices.mak -include config-all-disas.mak diff --git a/hw/block/Makefile.objs b/hw/block/Makefile.objs index d4c3ab7..e0ed980 100644 --- a/hw/block/Makefile.objs +++ b/hw/block/Makefile.objs @@ -4,7 +4,7 @@ common-obj-$(CONFIG_SSI_M25P80) += m25p80.o common-obj-$(CONFIG_NAND) += nand.o common-obj-$(CONFIG_PFLASH_CFI01) += pflash_cfi01.o common-obj-$(CONFIG_PFLASH_CFI02) += pflash_cfi02.o -common-obj-$(CONFIG_XEN_BACKEND) += xen_disk.o +common-obj-$(CONFIG_XEN) += xen_disk.o common-obj-$(CONFIG_ECC) += ecc.o common-obj-$(CONFIG_ONENAND) += onenand.o common-obj-$(CONFIG_NVME_PCI) += nvme.o diff --git a/hw/char/Makefile.objs b/hw/char/Makefile.objs index 6ea76fe..725fdc4 100644 --- a/hw/char/Makefile.objs +++ b/hw/char/Makefile.objs @@ -7,7 +7,7 @@ common-obj-$(CONFIG_SERIAL_ISA) += serial-isa.o common-obj-$(CONFIG_SERIAL_PCI) += serial-pci.o common-obj-$(CONFIG_VIRTIO) += virtio-console.o common-obj-$(CONFIG_XILINX) += xilinx_uartlite.o -common-obj-$(CONFIG_XEN_BACKEND) += xen_console.o +common-obj-$(CONFIG_XEN) += xen_console.o common-obj-$(CONFIG_CADENCE) += cadence_uart.o obj-$(CONFIG_EXYNOS4) += exynos4210_uart.o diff --git a/hw/display/Makefile.objs b/hw/display/Makefile.objs index 063889b..3d02e8b 100644 --- a/hw/display/Makefile.objs +++ b/hw/display/Makefile.objs @@ -5,7 +5,7 @@ common-obj-$(CONFIG_JAZZ_LED) += jazz_led.o common-obj-$(CONFIG_PL110) += pl110.o common-obj-$(CONFIG_SSD0303) += ssd0303.o common-obj-$(CONFIG_SSD0323) += ssd0323.o -common-obj-$(CONFIG_XEN_BACKEND) += xenfb.o +common-obj-$(CONFIG_XEN) += xenfb.o common-obj-$(CONFIG_VGA_PCI) += vga-pci.o common-obj-$(CONFIG_VGA_ISA) += vga-isa.o diff --git a/hw/net/Makefile.objs b/hw/net/Makefile.objs index 610ed3e..6a95d92 100644 --- a/hw/net/Makefile.objs +++ b/hw/net/Makefile.objs @@ -1,5 +1,5 @@ common-obj-$(CONFIG_DP8393X) += dp8393x.o -common-obj-$(CONFIG_XEN_BACKEND) += xen_nic.o +common-obj-$(CONFIG_XEN) += xen_nic.o # PCI network cards common-obj-$(CONFIG_NE2000_PCI) += ne2000.o diff --git a/hw/usb/Makefile.objs b/hw/usb/Makefile.objs index 98b5c9d..5958be8 100644 --- a/hw/usb/Makefile.objs +++ b/hw/usb/Makefile.objs @@ -40,5 +40,5 @@ common-obj-$(CONFIG_USB_REDIR) += redirect.o quirks.o common-obj-y += $(patsubst %,host-%.o,$(HOST_USB)) ifeq ($(CONFIG_USB_LIBUSB),y) -common-obj-$(CONFIG_XEN_BACKEND) += xen-usb.o +common-obj-$(CONFIG_XEN) += xen-usb.o endif diff --git a/hw/xen/Makefile.objs b/hw/xen/Makefile.objs index 591cdc2..4be3ec9 100644 --- a/hw/xen/Makefile.objs +++ b/hw/xen/Makefile.objs @@ -1,5 +1,5 @@ # xen backend driver support -common-obj-$(CONFIG_XEN_BACKEND) += xen_backend.o xen_devconfig.o xen_pvdev.o +common-obj-$(CONFIG_XEN) += xen_backend.o xen_devconfig.o xen_pvdev.o obj-$(CONFIG_XEN_PCI_PASSTHROUGH) += xen-host-pci-device.o obj-$(CONFIG_XEN_PCI_PASSTHROUGH) += xen_pt.o xen_pt_config_init.o xen_pt_graphics.o xen_pt_msi.o I applied the rest of the series and did ./configure --enable-virtfs --enable-xen; make -j5 I got the following error: LINK aarch64-softmmu/qemu-system-aarch64 ../hw/9pfs/xen-9p-backend.o: In function `xen_9pfs_alloc': /local/qemu/hw/9pfs/xen-9p-backend.c:387: undefined reference to `xenstore_write_be_str' /local/qemu/hw/9pfs/xen-9p-backend.c:388: undefined reference to `xenstore_write_be_int' ../hw/9pfs/xen-9p-backend.o: In function `xen_9pfs_connect': /local/qemu/hw/9pfs/xen-9p-backend.c:292: undefined reference to `xenstore_read_fe_int' /local/qemu/hw/9pfs/xen-9p-backend.c:313: undefined reference to `xenstore_read_fe_int' /local/qemu/hw/9pfs/xen-9p-backend.c:357: undefined reference to `xen_pv_printf' /local/qemu/hw/9pfs/xen-9p-backend.c:307: undefined reference to `xenstore_read_fe_int' /local/qemu/hw/9pfs/xen-9p-backend.c:362: undefined reference to `xenstore_read_be_str' /local/qemu/hw/9pfs/xen-9p-backend.c:363: undefined reference to `xenstore_read_be_str' /local/qemu/hw/9pfs/xen-9p-backend.c:366: undefined reference to `xenstore_read_fe_str' /local/qemu/hw/9pfs/xen-9p-backend.c:353: undefined reference to `xen_pv_printf' ../hw/9pfs/xen-9p-backend.o: In function `xen_9pfs_alloc': /local/qemu/hw/9pfs/xen-9p-backend.c:389: undefined reference to `xenstore_write_be_int' collect2: error: ld returned 1 exit status make[1]: *** [qemu-system-arm] Error 1 make: *** [subdir-arm-softmmu] Error 2 ../hw/9pfs/xen-9p-backend.o: In function `xen_9pfs_alloc': /local/qemu/hw/9pfs/xen-9p-backend.c:387: undefined reference to `xenstore_write_be_str' /local/qemu/hw/9pfs/xen-9p-backend.c:388: undefined reference to `xenstore_write_be_int' ../hw/9pfs/xen-9p-backend.o: In function `xen_9pfs_connect': /local/qemu/hw/9pfs/xen-9p-backend.c:292: undefined reference to `xenstore_read_fe_int' /local/qemu/hw/9pfs/xen-9p-backend.c:313: undefined reference to `xenstore_read_fe_int' /local/qemu/hw/9pfs/xen-9p-backend.c:357: undefined reference to `xen_pv_printf' /local/qemu/hw/9pfs/xen-9p-backend.c:307: undefined reference to `xenstore_read_fe_int' /local/qemu/hw/9pfs/xen-9p-backend.c:362: undefined reference to `xenstore_read_be_str' /local/qemu/hw/9pfs/xen-9p-backend.c:363: undefined reference to `xenstore_read_be_str' /local/qemu/hw/9pfs/xen-9p-backend.c:366: undefined reference to `xenstore_read_fe_str' /local/qemu/hw/9pfs/xen-9p-backend.c:353: undefined reference to `xen_pv_printf' ../hw/9pfs/xen-9p-backend.o: In function `xen_9pfs_alloc': /local/qemu/hw/9pfs/xen-9p-backend.c:389: undefined reference to `xenstore_write_be_int' collect2: error: ld returned 1 exit status make[1]: *** [qemu-system-aarch64] Error 1 make: *** [subdir-aarch64-softmmu] Error 2
WARNING: multiple messages have this Message-ID (diff)
From: Stefano Stabellini <sstabellini@kernel.org> To: Stefano Stabellini <sstabellini@kernel.org> Cc: peter.maydell@linaro.org, groug@kaod.org, qemu-devel@nongnu.org, Stefano Stabellini <stefano@aporeto.com>, stefanha@redhat.com, xen-devel@lists.xenproject.org, anthony.perard@citrix.com, Paolo Bonzini <pbonzini@redhat.com>, rth@twiddle.net Subject: Re: [PATCH v2 1/9] configure: change CONFIG_XEN_BACKEND to be a target property Date: Tue, 14 Mar 2017 13:23:09 -0700 (PDT) [thread overview] Message-ID: <alpine.DEB.2.10.1703141318470.4807@sstabellini-ThinkPad-X260> (raw) In-Reply-To: <alpine.DEB.2.10.1703141201300.4807@sstabellini-ThinkPad-X260> On Tue, 14 Mar 2017, Stefano Stabellini wrote: > On Tue, 14 Mar 2017, Paolo Bonzini wrote: > > On 14/03/2017 00:55, Stefano Stabellini wrote: > > > CONFIG_XEN_BACKEND is currently set when the host supports Xen, > > > regardless of the chosen targets. As a consequence, Xen backends can be > > > enabled even on targets that don't support Xen. > > > > > > Fix the issue by setting CONFIG_XEN_BACKEND only for targets that > > > support Xen. > > > > > > Signed-off-by: Stefano Stabellini <stefano@aporeto.com> > > > CC: groug@kaod.org > > > CC: groug@kaod.org > > > CC: pbonzini@redhat.com > > > CC: peter.maydell@linaro.org > > > CC: rth@twiddle.net > > > CC: stefanha@redhat.com > > > --- > > > configure | 2 +- > > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > > > diff --git a/configure b/configure > > > index 6c21975..6d8f752 100755 > > > --- a/configure > > > +++ b/configure > > > @@ -5442,7 +5442,6 @@ if test "$virglrenderer" = "yes" ; then > > > echo "VIRGL_LIBS=$virgl_libs" >> $config_host_mak > > > fi > > > if test "$xen" = "yes" ; then > > > - echo "CONFIG_XEN_BACKEND=y" >> $config_host_mak > > > echo "CONFIG_XEN_CTRL_INTERFACE_VERSION=$xen_ctrl_version" >> $config_host_mak > > > if test "$xen_pv_domain_build" = "yes" ; then > > > echo "CONFIG_XEN_PV_DOMAIN_BUILD=y" >> $config_host_mak > > > @@ -6028,6 +6027,7 @@ case "$target_name" in > > > i386|x86_64) > > > if test "$xen" = "yes" -a "$target_softmmu" = "yes" ; then > > > echo "CONFIG_XEN=y" >> $config_target_mak > > > + echo "CONFIG_XEN_BACKEND=y" >> $config_target_mak > > > if test "$xen_pci_passthrough" = yes; then > > > echo "CONFIG_XEN_PCI_PASSTHROUGH=y" >> "$config_target_mak" > > > fi > > > > > > > This messes up a bit the way xen_nic.o and friends are compiled, I > > think, because they are common-obj-y but they are only found when > > compiling in the target subdirectories. So you end up building > > x86_64-softmmu/../hw/net/xen_nic.o > > > > If you're unlucky, I believe this can lead to a link failure where a > > target is building xen_nic.o, while the other tries to link to a > > partially written object file. > > > > I think the files should be changed from > > common-obj-$(CONFIG_XEN_BACKEND) to common-obj-$(CONFIG_XEN). > > > > The Makefile.objs change ensures that Xen backends are not enabled on > > targets that support Xen. > > Actually I thought about doing that instead of the configure change. It > makes sense to me. > > > > Then you add to Makefile: > > > > CONFIG_SOFTMMU := $(if $(filter %-softmmu,$(TARGET_DIRS)),y) > > CONFIG_USER_ONLY := $(if $(filter %-user,$(TARGET_DIRS)),y) > > +CONFIG_XEN := $(CONFIG_XEN_BACKEND) > > CONFIG_ALL=y > > -include config-all-devices.mak > > -include config-all-disas.mak > > > > The Makefile change ensures that they are built before descending in the > > target-specific directories. > > But I don't understand this. Please correct me if I am wrong, but this > change looks like it would end up setting CONFIG_XEN every time that > CONFIG_XEN_BACKEND is set. Without the configure change at the top, it > would end up setting CONFIG_XEN whenever the host supports Xen, even for > non-x86 and non-ARM targets. What am I missing? FYI I made the following changes: diff --git a/Makefile b/Makefile index 1c4c04f..b246138 100644 --- a/Makefile +++ b/Makefile @@ -26,6 +26,7 @@ endif CONFIG_SOFTMMU := $(if $(filter %-softmmu,$(TARGET_DIRS)),y) CONFIG_USER_ONLY := $(if $(filter %-user,$(TARGET_DIRS)),y) +CONFIG_XEN := $(CONFIG_XEN_BACKEND) CONFIG_ALL=y -include config-all-devices.mak -include config-all-disas.mak diff --git a/hw/block/Makefile.objs b/hw/block/Makefile.objs index d4c3ab7..e0ed980 100644 --- a/hw/block/Makefile.objs +++ b/hw/block/Makefile.objs @@ -4,7 +4,7 @@ common-obj-$(CONFIG_SSI_M25P80) += m25p80.o common-obj-$(CONFIG_NAND) += nand.o common-obj-$(CONFIG_PFLASH_CFI01) += pflash_cfi01.o common-obj-$(CONFIG_PFLASH_CFI02) += pflash_cfi02.o -common-obj-$(CONFIG_XEN_BACKEND) += xen_disk.o +common-obj-$(CONFIG_XEN) += xen_disk.o common-obj-$(CONFIG_ECC) += ecc.o common-obj-$(CONFIG_ONENAND) += onenand.o common-obj-$(CONFIG_NVME_PCI) += nvme.o diff --git a/hw/char/Makefile.objs b/hw/char/Makefile.objs index 6ea76fe..725fdc4 100644 --- a/hw/char/Makefile.objs +++ b/hw/char/Makefile.objs @@ -7,7 +7,7 @@ common-obj-$(CONFIG_SERIAL_ISA) += serial-isa.o common-obj-$(CONFIG_SERIAL_PCI) += serial-pci.o common-obj-$(CONFIG_VIRTIO) += virtio-console.o common-obj-$(CONFIG_XILINX) += xilinx_uartlite.o -common-obj-$(CONFIG_XEN_BACKEND) += xen_console.o +common-obj-$(CONFIG_XEN) += xen_console.o common-obj-$(CONFIG_CADENCE) += cadence_uart.o obj-$(CONFIG_EXYNOS4) += exynos4210_uart.o diff --git a/hw/display/Makefile.objs b/hw/display/Makefile.objs index 063889b..3d02e8b 100644 --- a/hw/display/Makefile.objs +++ b/hw/display/Makefile.objs @@ -5,7 +5,7 @@ common-obj-$(CONFIG_JAZZ_LED) += jazz_led.o common-obj-$(CONFIG_PL110) += pl110.o common-obj-$(CONFIG_SSD0303) += ssd0303.o common-obj-$(CONFIG_SSD0323) += ssd0323.o -common-obj-$(CONFIG_XEN_BACKEND) += xenfb.o +common-obj-$(CONFIG_XEN) += xenfb.o common-obj-$(CONFIG_VGA_PCI) += vga-pci.o common-obj-$(CONFIG_VGA_ISA) += vga-isa.o diff --git a/hw/net/Makefile.objs b/hw/net/Makefile.objs index 610ed3e..6a95d92 100644 --- a/hw/net/Makefile.objs +++ b/hw/net/Makefile.objs @@ -1,5 +1,5 @@ common-obj-$(CONFIG_DP8393X) += dp8393x.o -common-obj-$(CONFIG_XEN_BACKEND) += xen_nic.o +common-obj-$(CONFIG_XEN) += xen_nic.o # PCI network cards common-obj-$(CONFIG_NE2000_PCI) += ne2000.o diff --git a/hw/usb/Makefile.objs b/hw/usb/Makefile.objs index 98b5c9d..5958be8 100644 --- a/hw/usb/Makefile.objs +++ b/hw/usb/Makefile.objs @@ -40,5 +40,5 @@ common-obj-$(CONFIG_USB_REDIR) += redirect.o quirks.o common-obj-y += $(patsubst %,host-%.o,$(HOST_USB)) ifeq ($(CONFIG_USB_LIBUSB),y) -common-obj-$(CONFIG_XEN_BACKEND) += xen-usb.o +common-obj-$(CONFIG_XEN) += xen-usb.o endif diff --git a/hw/xen/Makefile.objs b/hw/xen/Makefile.objs index 591cdc2..4be3ec9 100644 --- a/hw/xen/Makefile.objs +++ b/hw/xen/Makefile.objs @@ -1,5 +1,5 @@ # xen backend driver support -common-obj-$(CONFIG_XEN_BACKEND) += xen_backend.o xen_devconfig.o xen_pvdev.o +common-obj-$(CONFIG_XEN) += xen_backend.o xen_devconfig.o xen_pvdev.o obj-$(CONFIG_XEN_PCI_PASSTHROUGH) += xen-host-pci-device.o obj-$(CONFIG_XEN_PCI_PASSTHROUGH) += xen_pt.o xen_pt_config_init.o xen_pt_graphics.o xen_pt_msi.o I applied the rest of the series and did ./configure --enable-virtfs --enable-xen; make -j5 I got the following error: LINK aarch64-softmmu/qemu-system-aarch64 ../hw/9pfs/xen-9p-backend.o: In function `xen_9pfs_alloc': /local/qemu/hw/9pfs/xen-9p-backend.c:387: undefined reference to `xenstore_write_be_str' /local/qemu/hw/9pfs/xen-9p-backend.c:388: undefined reference to `xenstore_write_be_int' ../hw/9pfs/xen-9p-backend.o: In function `xen_9pfs_connect': /local/qemu/hw/9pfs/xen-9p-backend.c:292: undefined reference to `xenstore_read_fe_int' /local/qemu/hw/9pfs/xen-9p-backend.c:313: undefined reference to `xenstore_read_fe_int' /local/qemu/hw/9pfs/xen-9p-backend.c:357: undefined reference to `xen_pv_printf' /local/qemu/hw/9pfs/xen-9p-backend.c:307: undefined reference to `xenstore_read_fe_int' /local/qemu/hw/9pfs/xen-9p-backend.c:362: undefined reference to `xenstore_read_be_str' /local/qemu/hw/9pfs/xen-9p-backend.c:363: undefined reference to `xenstore_read_be_str' /local/qemu/hw/9pfs/xen-9p-backend.c:366: undefined reference to `xenstore_read_fe_str' /local/qemu/hw/9pfs/xen-9p-backend.c:353: undefined reference to `xen_pv_printf' ../hw/9pfs/xen-9p-backend.o: In function `xen_9pfs_alloc': /local/qemu/hw/9pfs/xen-9p-backend.c:389: undefined reference to `xenstore_write_be_int' collect2: error: ld returned 1 exit status make[1]: *** [qemu-system-arm] Error 1 make: *** [subdir-arm-softmmu] Error 2 ../hw/9pfs/xen-9p-backend.o: In function `xen_9pfs_alloc': /local/qemu/hw/9pfs/xen-9p-backend.c:387: undefined reference to `xenstore_write_be_str' /local/qemu/hw/9pfs/xen-9p-backend.c:388: undefined reference to `xenstore_write_be_int' ../hw/9pfs/xen-9p-backend.o: In function `xen_9pfs_connect': /local/qemu/hw/9pfs/xen-9p-backend.c:292: undefined reference to `xenstore_read_fe_int' /local/qemu/hw/9pfs/xen-9p-backend.c:313: undefined reference to `xenstore_read_fe_int' /local/qemu/hw/9pfs/xen-9p-backend.c:357: undefined reference to `xen_pv_printf' /local/qemu/hw/9pfs/xen-9p-backend.c:307: undefined reference to `xenstore_read_fe_int' /local/qemu/hw/9pfs/xen-9p-backend.c:362: undefined reference to `xenstore_read_be_str' /local/qemu/hw/9pfs/xen-9p-backend.c:363: undefined reference to `xenstore_read_be_str' /local/qemu/hw/9pfs/xen-9p-backend.c:366: undefined reference to `xenstore_read_fe_str' /local/qemu/hw/9pfs/xen-9p-backend.c:353: undefined reference to `xen_pv_printf' ../hw/9pfs/xen-9p-backend.o: In function `xen_9pfs_alloc': /local/qemu/hw/9pfs/xen-9p-backend.c:389: undefined reference to `xenstore_write_be_int' collect2: error: ld returned 1 exit status make[1]: *** [qemu-system-aarch64] Error 1 make: *** [subdir-aarch64-softmmu] Error 2 _______________________________________________ Xen-devel mailing list Xen-devel@lists.xen.org https://lists.xen.org/xen-devel
next prev parent reply other threads:[~2017-03-14 20:23 UTC|newest] Thread overview: 72+ messages / expand[flat|nested] mbox.gz Atom feed top 2017-03-13 23:55 [Qemu-devel] [PATCH v2 0/9] xen/9pfs: introduce the Xen 9pfs backend Stefano Stabellini 2017-03-13 23:55 ` Stefano Stabellini 2017-03-13 23:55 ` [Qemu-devel] [PATCH v2 1/9] configure: change CONFIG_XEN_BACKEND to be a target property Stefano Stabellini 2017-03-13 23:55 ` Stefano Stabellini 2017-03-13 23:55 ` [Qemu-devel] [PATCH v2 2/9] xen: import ring.h from xen Stefano Stabellini 2017-03-13 23:55 ` Stefano Stabellini 2017-03-15 8:00 ` [Qemu-devel] " Greg Kurz 2017-03-15 8:00 ` Greg Kurz 2017-03-15 18:36 ` [Qemu-devel] " Stefano Stabellini 2017-03-15 18:36 ` Stefano Stabellini 2017-03-15 19:00 ` [Qemu-devel] " Greg Kurz 2017-03-15 19:00 ` Greg Kurz 2017-03-15 19:04 ` [Qemu-devel] " Stefano Stabellini 2017-03-15 19:04 ` Stefano Stabellini 2017-03-13 23:55 ` [Qemu-devel] [PATCH v2 3/9] xen: introduce the header file for the Xen 9pfs transport protocol Stefano Stabellini 2017-03-13 23:55 ` Stefano Stabellini 2017-03-15 9:06 ` [Qemu-devel] " Greg Kurz 2017-03-15 9:06 ` Greg Kurz 2017-03-15 19:02 ` [Qemu-devel] " Stefano Stabellini 2017-03-15 19:02 ` Stefano Stabellini 2017-03-13 23:55 ` [Qemu-devel] [PATCH v2 4/9] xen/9pfs: introduce Xen 9pfs backend Stefano Stabellini 2017-03-13 23:55 ` Stefano Stabellini 2017-03-14 7:11 ` [Qemu-devel] " Juergen Gross 2017-03-14 7:11 ` Juergen Gross 2017-03-14 20:07 ` [Qemu-devel] " Stefano Stabellini 2017-03-14 20:07 ` Stefano Stabellini 2017-03-13 23:55 ` [Qemu-devel] [PATCH v2 5/9] xen/9pfs: connect to the frontend Stefano Stabellini 2017-03-13 23:55 ` Stefano Stabellini 2017-03-14 7:17 ` [Qemu-devel] " Juergen Gross 2017-03-14 7:17 ` Juergen Gross 2017-03-14 20:14 ` [Qemu-devel] " Stefano Stabellini 2017-03-14 20:14 ` Stefano Stabellini 2017-03-15 9:48 ` [Qemu-devel] " Greg Kurz 2017-03-15 9:48 ` Greg Kurz 2017-03-15 21:30 ` [Qemu-devel] " Stefano Stabellini 2017-03-15 21:30 ` Stefano Stabellini 2017-03-13 23:55 ` [Qemu-devel] [PATCH v2 6/9] xen/9pfs: receive requests from " Stefano Stabellini 2017-03-13 23:55 ` Stefano Stabellini 2017-03-15 10:51 ` [Qemu-devel] " Greg Kurz 2017-03-15 10:51 ` Greg Kurz 2017-03-15 21:56 ` [Qemu-devel] " Stefano Stabellini 2017-03-15 21:56 ` Stefano Stabellini 2017-03-15 11:53 ` Greg Kurz 2017-03-15 11:53 ` Greg Kurz 2017-03-15 22:03 ` [Qemu-devel] " Stefano Stabellini 2017-03-15 22:03 ` Stefano Stabellini 2017-03-13 23:55 ` [Qemu-devel] [PATCH v2 7/9] xen/9pfs: implement in/out_iov_from_pdu and vmarshal/vunmarshal Stefano Stabellini 2017-03-13 23:55 ` Stefano Stabellini 2017-03-15 10:58 ` [Qemu-devel] " Greg Kurz 2017-03-15 10:58 ` Greg Kurz 2017-03-15 21:58 ` [Qemu-devel] " Stefano Stabellini 2017-03-15 21:58 ` Stefano Stabellini 2017-03-13 23:55 ` [Qemu-devel] [PATCH v2 8/9] xen/9pfs: send responses back to the frontend Stefano Stabellini 2017-03-13 23:55 ` Stefano Stabellini 2017-03-15 10:59 ` [Qemu-devel] " Greg Kurz 2017-03-15 10:59 ` Greg Kurz 2017-03-15 21:59 ` [Qemu-devel] " Stefano Stabellini 2017-03-15 21:59 ` Stefano Stabellini 2017-03-13 23:56 ` [Qemu-devel] [PATCH v2 9/9] xen/9pfs: build and register Xen 9pfs backend Stefano Stabellini 2017-03-13 23:56 ` Stefano Stabellini 2017-03-14 10:02 ` [Qemu-devel] [PATCH v2 1/9] configure: change CONFIG_XEN_BACKEND to be a target property Paolo Bonzini 2017-03-14 10:02 ` Paolo Bonzini 2017-03-14 19:07 ` [Qemu-devel] " Stefano Stabellini 2017-03-14 19:07 ` Stefano Stabellini 2017-03-14 20:23 ` Stefano Stabellini [this message] 2017-03-14 20:23 ` Stefano Stabellini 2017-03-15 1:03 ` [Qemu-devel] " Greg Kurz 2017-03-15 1:03 ` Greg Kurz 2017-03-15 7:41 ` [Qemu-devel] " Paolo Bonzini 2017-03-15 7:41 ` Paolo Bonzini 2017-03-15 18:42 ` [Qemu-devel] " Stefano Stabellini 2017-03-15 18:42 ` Stefano Stabellini
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=alpine.DEB.2.10.1703141318470.4807@sstabellini-ThinkPad-X260 \ --to=sstabellini@kernel.org \ --cc=anthony.perard@citrix.com \ --cc=groug@kaod.org \ --cc=pbonzini@redhat.com \ --cc=peter.maydell@linaro.org \ --cc=qemu-devel@nongnu.org \ --cc=rth@twiddle.net \ --cc=stefanha@redhat.com \ --cc=stefano@aporeto.com \ --cc=xen-devel@lists.xenproject.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.