[PATCH v4 00/11] staging: r8188eu: trivial code cleanup patches

[PATCH v4 00/11] staging: r8188eu: trivial code cleanup patches

[Deepak R Varma]

Address different kinds of checkpatch complains for the staging/r8188eu module.
The patches are required to be applied in sequence.

Changes in v4:
   1. Include patch 11 in the set for unused macro clean up. Suggested by julia.lawall@inria.fr
   2. Update patch 1 per feedback from David.Laight@ACULAB.COM
   3. Update patch 5 & 6 per feedback from dan.carpenter@oracle.com & julia.lawall@inria.fr

Changes in v3:
   1. Patch 4: Extend the __constant_htons to htons change to other files of the driver.
      This was suggested by philipp.g.hortmann@gmail.com
   2. Patch 4: Spelling mistake corrected as pointed out by joe@perches.com
   3. Patch 5 through 10: Included in this version. Additional clean up patches.

Changes in v2:
   I incorrectly labeled the first revision as v1 instead of v2. So,
   following change recorded under v1 is actually changes for v2. Feedback
   provided by philipp.g.hortmann@gmail.com
      1. Improve language / grammar for the patch descriptions
      2. Further improve code reformatting


Deepak R Varma (11):
  staging: r8188eu: use Linux kernel variable naming convention
  staging: r8188eu: reformat long computation lines
  staging: r8188eu: remove {} for single statement blocks
  staging: r8188eu: use htons macro instead of __constant_htons
  staging: r8188eu: correct misspelled words in comments
  staging: r8188eu: Add space between function & macro parameters
  staging: r8188eu: Associate pointer symbol with parameter name
  staging: r8188eu: replace leading spaces by tabs
  staging: r8188eu: Put '{" on the symbol declaration line
  staging: r8188eu: Correct missing or extra space in the statements
  staging: r8188eu: Remove unused macros

 drivers/staging/r8188eu/core/rtw_br_ext.c     | 119 +++++++++---------
 drivers/staging/r8188eu/core/rtw_ioctl_set.c  |   2 +-
 drivers/staging/r8188eu/core/rtw_mlme_ext.c   |  36 +++---
 drivers/staging/r8188eu/core/rtw_recv.c       |   8 +-
 drivers/staging/r8188eu/core/rtw_xmit.c       |  14 +--
 drivers/staging/r8188eu/hal/HalPhyRf_8188e.c  |   2 +-
 drivers/staging/r8188eu/hal/odm_RTL8188E.c    |   2 +-
 .../staging/r8188eu/hal/rtl8188e_hal_init.c   |   2 +-
 drivers/staging/r8188eu/hal/rtl8188e_phycfg.c |  16 +--
 .../staging/r8188eu/include/Hal8188EPhyReg.h  |   4 +-
 .../staging/r8188eu/include/osdep_service.h   |   4 +-
 .../staging/r8188eu/include/rtl8188e_hal.h    |   6 +-
 .../staging/r8188eu/include/rtl8188e_spec.h   |  18 +--
 drivers/staging/r8188eu/include/rtw_cmd.h     |  62 +++++----
 drivers/staging/r8188eu/include/rtw_io.h      |  16 +--
 .../staging/r8188eu/include/rtw_ioctl_set.h   |   4 +-
 drivers/staging/r8188eu/include/rtw_mlme.h    |  22 ++--
 .../staging/r8188eu/include/rtw_mlme_ext.h    |  12 +-
 drivers/staging/r8188eu/include/rtw_recv.h    |   4 +-
 drivers/staging/r8188eu/include/rtw_xmit.h    |   2 +-
 drivers/staging/r8188eu/include/wifi.h        |  12 +-
 drivers/staging/r8188eu/os_dep/ioctl_linux.c  |   6 +-
 22 files changed, 176 insertions(+), 197 deletions(-)

--
2.30.2

[PATCH v4 01/11] staging: r8188eu: use Linux kernel variable naming convention

[Deepak R Varma]

Follow the Linux Kernel coding style variable naming convention instead
of using camelCase style. Issue reported by checkpatch script for
these variables:
        tagLen, tagType, networkAddr, ipAddr, macAddr

Signed-off-by: Deepak R Varma <drv@mailo.com>
---

Changes in v4:
   1. Implement "use short variable name" feedback from David.Laight@ACULAB.COM

Changes in v3:
   -- None

Changes in v1 [actually v2]:
   1. Improve patch description per feedback from julia.lawall@inria.fr


 drivers/staging/r8188eu/core/rtw_br_ext.c | 112 +++++++++++-----------
 1 file changed, 56 insertions(+), 56 deletions(-)

diff --git a/drivers/staging/r8188eu/core/rtw_br_ext.c b/drivers/staging/r8188eu/core/rtw_br_ext.c
index 4c5f30792a46..e509b8454e25 100644
--- a/drivers/staging/r8188eu/core/rtw_br_ext.c
+++ b/drivers/staging/r8188eu/core/rtw_br_ext.c
@@ -50,17 +50,17 @@
 static unsigned char *__nat25_find_pppoe_tag(struct pppoe_hdr *ph, unsigned short type)
 {
 	unsigned char *cur_ptr, *start_ptr;
-	unsigned short tagLen, tagType;
+	unsigned short tag_len, tag_type;

 	start_ptr = (unsigned char *)ph->tag;
 	cur_ptr = (unsigned char *)ph->tag;
 	while ((cur_ptr - start_ptr) < ntohs(ph->length)) {
 		/*  prevent un-alignment access */
-		tagType = (unsigned short)((cur_ptr[0] << 8) + cur_ptr[1]);
-		tagLen  = (unsigned short)((cur_ptr[2] << 8) + cur_ptr[3]);
-		if (tagType == type)
+		tag_type = (unsigned short)((cur_ptr[0] << 8) + cur_ptr[1]);
+		tag_len  = (unsigned short)((cur_ptr[2] << 8) + cur_ptr[3]);
+		if (tag_type == type)
 			return cur_ptr;
-		cur_ptr = cur_ptr + TAG_HDR_LEN + tagLen;
+		cur_ptr = cur_ptr + TAG_HDR_LEN + tag_len;
 	}
 	return NULL;
 }
@@ -111,32 +111,32 @@ static int  __nat25_has_expired(struct nat25_network_db_entry *fdb)
 	return 0;
 }

-static void __nat25_generate_ipv4_network_addr(unsigned char *networkAddr,
-				unsigned int *ipAddr)
+static void __nat25_generate_ipv4_network_addr(unsigned char *addr,
+				unsigned int *ip_addr)
 {
-	memset(networkAddr, 0, MAX_NETWORK_ADDR_LEN);
+	memset(addr, 0, MAX_NETWORK_ADDR_LEN);

-	networkAddr[0] = NAT25_IPV4;
-	memcpy(networkAddr + 7, (unsigned char *)ipAddr, 4);
+	addr[0] = NAT25_IPV4;
+	memcpy(addr + 7, (unsigned char *)ip_addr, 4);
 }

-static void __nat25_generate_pppoe_network_addr(unsigned char *networkAddr,
+static void __nat25_generate_pppoe_network_addr(unsigned char *addr,
 				unsigned char *ac_mac, __be16 *sid)
 {
-	memset(networkAddr, 0, MAX_NETWORK_ADDR_LEN);
+	memset(addr, 0, MAX_NETWORK_ADDR_LEN);

-	networkAddr[0] = NAT25_PPPOE;
-	memcpy(networkAddr + 1, (unsigned char *)sid, 2);
-	memcpy(networkAddr + 3, (unsigned char *)ac_mac, 6);
+	addr[0] = NAT25_PPPOE;
+	memcpy(addr + 1, (unsigned char *)sid, 2);
+	memcpy(addr + 3, (unsigned char *)ac_mac, 6);
 }

-static  void __nat25_generate_ipv6_network_addr(unsigned char *networkAddr,
-				unsigned int *ipAddr)
+static  void __nat25_generate_ipv6_network_addr(unsigned char *addr,
+				unsigned int *ip_addr)
 {
-	memset(networkAddr, 0, MAX_NETWORK_ADDR_LEN);
+	memset(addr, 0, MAX_NETWORK_ADDR_LEN);

-	networkAddr[0] = NAT25_IPV6;
-	memcpy(networkAddr + 1, (unsigned char *)ipAddr, 16);
+	addr[0] = NAT25_IPV6;
+	memcpy(addr + 1, (unsigned char *)ip_addr, 16);
 }

 static unsigned char *scan_tlv(unsigned char *data, int len, unsigned char tag, unsigned char len8b)
@@ -200,40 +200,40 @@ static int update_nd_link_layer_addr(unsigned char *data, int len, unsigned char
 	return 0;
 }

-static int __nat25_network_hash(unsigned char *networkAddr)
+static int __nat25_network_hash(unsigned char *addr)
 {
-	if (networkAddr[0] == NAT25_IPV4) {
+	if (addr[0] == NAT25_IPV4) {
 		unsigned long x;

-		x = networkAddr[7] ^ networkAddr[8] ^ networkAddr[9] ^ networkAddr[10];
+		x = addr[7] ^ addr[8] ^ addr[9] ^ addr[10];

 		return x & (NAT25_HASH_SIZE - 1);
-	} else if (networkAddr[0] == NAT25_IPX) {
+	} else if (addr[0] == NAT25_IPX) {
 		unsigned long x;

-		x = networkAddr[1] ^ networkAddr[2] ^ networkAddr[3] ^ networkAddr[4] ^ networkAddr[5] ^
-			networkAddr[6] ^ networkAddr[7] ^ networkAddr[8] ^ networkAddr[9] ^ networkAddr[10];
+		x = addr[1] ^ addr[2] ^ addr[3] ^ addr[4] ^ addr[5] ^
+			addr[6] ^ addr[7] ^ addr[8] ^ addr[9] ^ addr[10];

 		return x & (NAT25_HASH_SIZE - 1);
-	} else if (networkAddr[0] == NAT25_APPLE) {
+	} else if (addr[0] == NAT25_APPLE) {
 		unsigned long x;

-		x = networkAddr[1] ^ networkAddr[2] ^ networkAddr[3];
+		x = addr[1] ^ addr[2] ^ addr[3];

 		return x & (NAT25_HASH_SIZE - 1);
-	} else if (networkAddr[0] == NAT25_PPPOE) {
+	} else if (addr[0] == NAT25_PPPOE) {
 		unsigned long x;

-		x = networkAddr[0] ^ networkAddr[1] ^ networkAddr[2] ^ networkAddr[3] ^ networkAddr[4] ^ networkAddr[5] ^ networkAddr[6] ^ networkAddr[7] ^ networkAddr[8];
+		x = addr[0] ^ addr[1] ^ addr[2] ^ addr[3] ^ addr[4] ^ addr[5] ^ addr[6] ^ addr[7] ^ addr[8];

 		return x & (NAT25_HASH_SIZE - 1);
-	} else if (networkAddr[0] == NAT25_IPV6) {
+	} else if (addr[0] == NAT25_IPV6) {
 		unsigned long x;

-		x = networkAddr[1] ^ networkAddr[2] ^ networkAddr[3] ^ networkAddr[4] ^ networkAddr[5] ^
-			networkAddr[6] ^ networkAddr[7] ^ networkAddr[8] ^ networkAddr[9] ^ networkAddr[10] ^
-			networkAddr[11] ^ networkAddr[12] ^ networkAddr[13] ^ networkAddr[14] ^ networkAddr[15] ^
-			networkAddr[16];
+		x = addr[1] ^ addr[2] ^ addr[3] ^ addr[4] ^ addr[5] ^
+			addr[6] ^ addr[7] ^ addr[8] ^ addr[9] ^ addr[10] ^
+			addr[11] ^ addr[12] ^ addr[13] ^ addr[14] ^ addr[15] ^
+			addr[16];

 		return x & (NAT25_HASH_SIZE - 1);
 	} else {
@@ -241,7 +241,7 @@ static int __nat25_network_hash(unsigned char *networkAddr)
 		int i;

 		for (i = 0; i < MAX_NETWORK_ADDR_LEN; i++)
-			x ^= networkAddr[i];
+			x ^= addr[i];

 		return x & (NAT25_HASH_SIZE - 1);
 	}
@@ -269,17 +269,17 @@ static void __network_hash_unlink(struct nat25_network_db_entry *ent)
 }

 static void __nat25_db_network_insert(struct adapter *priv,
-				unsigned char *macAddr, unsigned char *networkAddr)
+				unsigned char *mac_addr, unsigned char *addr)
 {
 	struct nat25_network_db_entry *db;
 	int hash;

 	spin_lock_bh(&priv->br_ext_lock);
-	hash = __nat25_network_hash(networkAddr);
+	hash = __nat25_network_hash(addr);
 	db = priv->nethash[hash];
 	while (db) {
-		if (!memcmp(db->networkAddr, networkAddr, MAX_NETWORK_ADDR_LEN)) {
-			memcpy(db->macAddr, macAddr, ETH_ALEN);
+		if (!memcmp(db->networkAddr, addr, MAX_NETWORK_ADDR_LEN)) {
+			memcpy(db->macAddr, mac_addr, ETH_ALEN);
 			db->ageing_timer = jiffies;
 			spin_unlock_bh(&priv->br_ext_lock);
 			return;
@@ -291,8 +291,8 @@ static void __nat25_db_network_insert(struct adapter *priv,
 		spin_unlock_bh(&priv->br_ext_lock);
 		return;
 	}
-	memcpy(db->networkAddr, networkAddr, MAX_NETWORK_ADDR_LEN);
-	memcpy(db->macAddr, macAddr, ETH_ALEN);
+	memcpy(db->networkAddr, addr, MAX_NETWORK_ADDR_LEN);
+	memcpy(db->macAddr, mac_addr, ETH_ALEN);
 	atomic_set(&db->use_count, 1);
 	db->ageing_timer = jiffies;

@@ -366,7 +366,7 @@ void nat25_db_expire(struct adapter *priv)
 int nat25_db_handle(struct adapter *priv, struct sk_buff *skb, int method)
 {
 	unsigned short protocol;
-	unsigned char networkAddr[MAX_NETWORK_ADDR_LEN];
+	unsigned char addr[MAX_NETWORK_ADDR_LEN];
 	unsigned int tmp;

 	if (!skb)
@@ -395,9 +395,9 @@ int nat25_db_handle(struct adapter *priv, struct sk_buff *skb, int method)
 			if (iph->saddr == 0)
 				return 0;
 			tmp = be32_to_cpu(iph->saddr);
-			__nat25_generate_ipv4_network_addr(networkAddr, &tmp);
+			__nat25_generate_ipv4_network_addr(addr, &tmp);
 			/* record source IP address and , source mac address into db */
-			__nat25_db_network_insert(priv, skb->data + ETH_ALEN, networkAddr);
+			__nat25_db_network_insert(priv, skb->data + ETH_ALEN, addr);
 			return 0;
 		default:
 			return -1;
@@ -421,8 +421,8 @@ int nat25_db_handle(struct adapter *priv, struct sk_buff *skb, int method)
 			memcpy(arp_ptr, GET_MY_HWADDR(priv), ETH_ALEN);
 			arp_ptr += arp->ar_hln;
 			sender = (unsigned int *)arp_ptr;
-			__nat25_generate_ipv4_network_addr(networkAddr, sender);
-			__nat25_db_network_insert(priv, skb->data + ETH_ALEN, networkAddr);
+			__nat25_generate_ipv4_network_addr(addr, sender);
+			__nat25_db_network_insert(priv, skb->data + ETH_ALEN, addr);
 			return 0;
 		default:
 			return -1;
@@ -495,9 +495,9 @@ int nat25_db_handle(struct adapter *priv, struct sk_buff *skb, int method)
 					return -1;
 				}
 			} else {	/*  session phase */
-				__nat25_generate_pppoe_network_addr(networkAddr, skb->data, &ph->sid);
+				__nat25_generate_pppoe_network_addr(addr, skb->data, &ph->sid);

-				__nat25_db_network_insert(priv, skb->data + ETH_ALEN, networkAddr);
+				__nat25_db_network_insert(priv, skb->data + ETH_ALEN, addr);

 				if (!priv->ethBrExtInfo.addPPPoETag &&
 				    priv->pppoe_connection_in_progress &&
@@ -548,8 +548,8 @@ int nat25_db_handle(struct adapter *priv, struct sk_buff *skb, int method)
 			return -1;
 		case NAT25_INSERT:
 			if (memcmp(&iph->saddr, "\x0\x0\x0\x0\x0\x0\x0\x0\x0\x0\x0\x0\x0\x0\x0\x0", 16)) {
-				__nat25_generate_ipv6_network_addr(networkAddr, (unsigned int *)&iph->saddr);
-				__nat25_db_network_insert(priv, skb->data + ETH_ALEN, networkAddr);
+				__nat25_generate_ipv6_network_addr(addr, (unsigned int *)&iph->saddr);
+				__nat25_db_network_insert(priv, skb->data + ETH_ALEN, addr);

 				if (iph->nexthdr == IPPROTO_ICMPV6 &&
 						skb->len > (ETH_HLEN +  sizeof(*iph) + 4)) {
@@ -639,17 +639,17 @@ void dhcp_flag_bcast(struct adapter *priv, struct sk_buff *skb)
 	}
 }

-void *scdb_findEntry(struct adapter *priv, unsigned char *ipAddr)
+void *scdb_findEntry(struct adapter *priv, unsigned char *ip_addr)
 {
-	unsigned char networkAddr[MAX_NETWORK_ADDR_LEN];
+	unsigned char addr[MAX_NETWORK_ADDR_LEN];
 	struct nat25_network_db_entry *db;
 	int hash;

-	__nat25_generate_ipv4_network_addr(networkAddr, (unsigned int *)ipAddr);
-	hash = __nat25_network_hash(networkAddr);
+	__nat25_generate_ipv4_network_addr(addr, (unsigned int *)ip_addr);
+	hash = __nat25_network_hash(addr);
 	db = priv->nethash[hash];
 	while (db) {
-		if (!memcmp(db->networkAddr, networkAddr, MAX_NETWORK_ADDR_LEN)) {
+		if (!memcmp(db->networkAddr, addr, MAX_NETWORK_ADDR_LEN)) {
 			return (void *)db;
 		}

--
2.30.2

[PATCH v4 02/11] staging: r8188eu: reformat long computation lines

[Deepak R Varma]

Reformat long running computation instructions to improve code readability.
Address checkpatch script complaints like:
	CHECK: line length of 171 exceeds 100 columns

Signed-off-by: Deepak R Varma <drv@mailo.com>
---

Changes in v4:
   -- As the variable name is shorter now, the reformatting is more clearer.

Changes in v3:
   -- None

Changes in v1 [actually v2]:
   1. Further improve the formatting per feedback from gregkh@linuxfoundation.org


 drivers/staging/r8188eu/core/rtw_br_ext.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/staging/r8188eu/core/rtw_br_ext.c b/drivers/staging/r8188eu/core/rtw_br_ext.c
index e509b8454e25..d4059f0fc362 100644
--- a/drivers/staging/r8188eu/core/rtw_br_ext.c
+++ b/drivers/staging/r8188eu/core/rtw_br_ext.c
@@ -212,7 +212,7 @@ static int __nat25_network_hash(unsigned char *addr)
 		unsigned long x;

 		x = addr[1] ^ addr[2] ^ addr[3] ^ addr[4] ^ addr[5] ^
-			addr[6] ^ addr[7] ^ addr[8] ^ addr[9] ^ addr[10];
+		    addr[6] ^ addr[7] ^ addr[8] ^ addr[9] ^ addr[10];

 		return x & (NAT25_HASH_SIZE - 1);
 	} else if (addr[0] == NAT25_APPLE) {
@@ -224,16 +224,16 @@ static int __nat25_network_hash(unsigned char *addr)
 	} else if (addr[0] == NAT25_PPPOE) {
 		unsigned long x;

-		x = addr[0] ^ addr[1] ^ addr[2] ^ addr[3] ^ addr[4] ^ addr[5] ^ addr[6] ^ addr[7] ^ addr[8];
+		x = addr[0] ^ addr[1] ^ addr[2] ^ addr[3] ^ addr[4] ^
+		    addr[5] ^ addr[6] ^ addr[7] ^ addr[8];

 		return x & (NAT25_HASH_SIZE - 1);
 	} else if (addr[0] == NAT25_IPV6) {
 		unsigned long x;

-		x = addr[1] ^ addr[2] ^ addr[3] ^ addr[4] ^ addr[5] ^
-			addr[6] ^ addr[7] ^ addr[8] ^ addr[9] ^ addr[10] ^
-			addr[11] ^ addr[12] ^ addr[13] ^ addr[14] ^ addr[15] ^
-			addr[16];
+		x = addr[1] ^ addr[2] ^ addr[3] ^ addr[4] ^ addr[5] ^ addr[6] ^
+		    addr[7] ^ addr[8] ^ addr[9] ^ addr[10] ^ addr[11] ^ addr[12] ^
+		    addr[13] ^ addr[14] ^ addr[15] ^ addr[16];

 		return x & (NAT25_HASH_SIZE - 1);
 	} else {
--
2.30.2

[PATCH v4 03/11] staging: r8188eu: remove {} for single statement blocks

[Deepak R Varma]

As per the Linux kernel coding-style guidelines, there is no need to
use {} for single statement blocks. Issue flagged by checkpatch script.

Signed-off-by: Deepak R Varma <drv@mailo.com>
---

Changes in v4:
   -- None.

Changes in v3:
   -- None.

Changes in v1 [actually v2]:
   1. Improve patch description language to make it simpler. Feedback received
      from julia.lawall@inria.fr


 drivers/staging/r8188eu/core/rtw_br_ext.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/staging/r8188eu/core/rtw_br_ext.c b/drivers/staging/r8188eu/core/rtw_br_ext.c
index d4059f0fc362..b418cbc307b3 100644
--- a/drivers/staging/r8188eu/core/rtw_br_ext.c
+++ b/drivers/staging/r8188eu/core/rtw_br_ext.c
@@ -649,9 +649,8 @@ void *scdb_findEntry(struct adapter *priv, unsigned char *ip_addr)
 	hash = __nat25_network_hash(addr);
 	db = priv->nethash[hash];
 	while (db) {
-		if (!memcmp(db->networkAddr, addr, MAX_NETWORK_ADDR_LEN)) {
+		if (!memcmp(db->networkAddr, addr, MAX_NETWORK_ADDR_LEN))
 			return (void *)db;
-		}

 		db = db->next_hash;
 	}
--
2.30.2

[PATCH v4 04/11] staging: r8188eu: use htons macro instead of __constant_htons

[Deepak R Varma]

Macro "htons" is more efficient and clearer. It should be used for
constants instead of the __constant_htons macro. Resolves following
checkpatch script complaint:
        WARNING: __constant_htons should be htons

Signed-off-by: Deepak R Varma <drv@mailo.com>
---

Changes in v4:
   -- None.

Changes in v3:
   1. Make this a driver-wide change. Feedback from philipp.g.hortmann@gmail.com
   2. Correct spelling in patch log. Feedback from joe@perches.com


 drivers/staging/r8188eu/core/rtw_br_ext.c |  6 +++---
 drivers/staging/r8188eu/core/rtw_xmit.c   | 14 +++++++-------
 2 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/staging/r8188eu/core/rtw_br_ext.c b/drivers/staging/r8188eu/core/rtw_br_ext.c
index b418cbc307b3..a23f7df373ed 100644
--- a/drivers/staging/r8188eu/core/rtw_br_ext.c
+++ b/drivers/staging/r8188eu/core/rtw_br_ext.c
@@ -606,14 +606,14 @@ void dhcp_flag_bcast(struct adapter *priv, struct sk_buff *skb)
 	if (!priv->ethBrExtInfo.dhcp_bcst_disable) {
 		__be16 protocol = *((__be16 *)(skb->data + 2 * ETH_ALEN));

-		if (protocol == __constant_htons(ETH_P_IP)) { /*  IP */
+		if (protocol == htons(ETH_P_IP)) { /*  IP */
 			struct iphdr *iph = (struct iphdr *)(skb->data + ETH_HLEN);

 			if (iph->protocol == IPPROTO_UDP) { /*  UDP */
 				struct udphdr *udph = (struct udphdr *)((size_t)iph + (iph->ihl << 2));

-				if ((udph->source == __constant_htons(CLIENT_PORT)) &&
-				    (udph->dest == __constant_htons(SERVER_PORT))) { /*  DHCP request */
+				if ((udph->source == htons(CLIENT_PORT)) &&
+				    (udph->dest == htons(SERVER_PORT))) { /*  DHCP request */
 					struct dhcpMessage *dhcph =
 						(struct dhcpMessage *)((size_t)udph + sizeof(struct udphdr));
 					u32 cookie = be32_to_cpu((__be32)dhcph->cookie);
diff --git a/drivers/staging/r8188eu/core/rtw_xmit.c b/drivers/staging/r8188eu/core/rtw_xmit.c
index 873d2c5c3634..4f8220428328 100644
--- a/drivers/staging/r8188eu/core/rtw_xmit.c
+++ b/drivers/staging/r8188eu/core/rtw_xmit.c
@@ -1622,14 +1622,14 @@ static int rtw_br_client_tx(struct adapter *padapter, struct sk_buff **pskb)
 	spin_lock_bh(&padapter->br_ext_lock);
 	if (!(skb->data[0] & 1) && br_port &&
 	    memcmp(skb->data + ETH_ALEN, padapter->br_mac, ETH_ALEN) &&
-	    *((__be16 *)(skb->data + ETH_ALEN * 2)) != __constant_htons(ETH_P_8021Q) &&
-	    *((__be16 *)(skb->data + ETH_ALEN * 2)) == __constant_htons(ETH_P_IP) &&
+	    *((__be16 *)(skb->data + ETH_ALEN * 2)) != htons(ETH_P_8021Q) &&
+	    *((__be16 *)(skb->data + ETH_ALEN * 2)) == htons(ETH_P_IP) &&
 	    !memcmp(padapter->scdb_mac, skb->data + ETH_ALEN, ETH_ALEN) && padapter->scdb_entry) {
 		memcpy(skb->data + ETH_ALEN, GET_MY_HWADDR(padapter), ETH_ALEN);
 		padapter->scdb_entry->ageing_timer = jiffies;
 		spin_unlock_bh(&padapter->br_ext_lock);
 	} else {
-		if (*((__be16 *)(skb->data + ETH_ALEN * 2)) == __constant_htons(ETH_P_8021Q)) {
+		if (*((__be16 *)(skb->data + ETH_ALEN * 2)) == htons(ETH_P_8021Q)) {
 			is_vlan_tag = 1;
 			vlan_hdr = *((unsigned short *)(skb->data + ETH_ALEN * 2 + 2));
 			for (i = 0; i < 6; i++)
@@ -1637,10 +1637,10 @@ static int rtw_br_client_tx(struct adapter *padapter, struct sk_buff **pskb)
 			skb_pull(skb, 4);
 		}
 		if (!memcmp(skb->data + ETH_ALEN, padapter->br_mac, ETH_ALEN) &&
-		    (*((__be16 *)(skb->data + ETH_ALEN * 2)) == __constant_htons(ETH_P_IP)))
+		    (*((__be16 *)(skb->data + ETH_ALEN * 2)) == htons(ETH_P_IP)))
 			memcpy(padapter->br_ip, skb->data + WLAN_ETHHDR_LEN + 12, 4);

-		if (*((__be16 *)(skb->data + ETH_ALEN * 2)) == __constant_htons(ETH_P_IP)) {
+		if (*((__be16 *)(skb->data + ETH_ALEN * 2)) == htons(ETH_P_IP)) {
 			if (memcmp(padapter->scdb_mac, skb->data + ETH_ALEN, ETH_ALEN)) {
 				padapter->scdb_entry = (struct nat25_network_db_entry *)scdb_findEntry(padapter,
 							skb->data + WLAN_ETHHDR_LEN + 12);
@@ -1669,7 +1669,7 @@ static int rtw_br_client_tx(struct adapter *padapter, struct sk_buff **pskb)
 					skb_push(skb, 4);
 					for (i = 0; i < 6; i++)
 						*((unsigned short *)(skb->data + i * 2)) = *((unsigned short *)(skb->data + 4 + i * 2));
-					*((__be16 *)(skb->data + ETH_ALEN * 2)) = __constant_htons(ETH_P_8021Q);
+					*((__be16 *)(skb->data + ETH_ALEN * 2)) = htons(ETH_P_8021Q);
 					*((unsigned short *)(skb->data + ETH_ALEN * 2 + 2)) = vlan_hdr;
 				}

@@ -1708,7 +1708,7 @@ static int rtw_br_client_tx(struct adapter *padapter, struct sk_buff **pskb)
 			skb_push(skb, 4);
 			for (i = 0; i < 6; i++)
 				*((unsigned short *)(skb->data + i * 2)) = *((unsigned short *)(skb->data + 4 + i * 2));
-			*((__be16 *)(skb->data + ETH_ALEN * 2)) = __constant_htons(ETH_P_8021Q);
+			*((__be16 *)(skb->data + ETH_ALEN * 2)) = htons(ETH_P_8021Q);
 			*((unsigned short *)(skb->data + ETH_ALEN * 2 + 2)) = vlan_hdr;
 		}
 	}
--
2.30.2

[PATCH v4 05/11] staging: r8188eu: correct misspelled words in comments

[Deepak R Varma]

Fix spelling mistakes in code comments across the driver.

Signed-off-by: Deepak R Varma <drv@mailo.com>
---

Changes in v4:
   1. Implement corrections provided by dan.carpenter@oracle.com & julia.lawall@inria.fr
   2. Update patch log message to be simple and straight. Feedback from julia.lawall@inria.fr

Changes in v3:
   1. Patch newly added to the patch set.



 drivers/staging/r8188eu/core/rtw_ioctl_set.c  |  2 +-
 drivers/staging/r8188eu/core/rtw_mlme_ext.c   | 36 +++++++++----------
 drivers/staging/r8188eu/core/rtw_recv.c       |  8 ++---
 drivers/staging/r8188eu/hal/HalPhyRf_8188e.c  |  2 +-
 drivers/staging/r8188eu/hal/odm_RTL8188E.c    |  2 +-
 .../staging/r8188eu/hal/rtl8188e_hal_init.c   |  2 +-
 drivers/staging/r8188eu/hal/rtl8188e_phycfg.c | 16 ++++-----
 .../staging/r8188eu/include/Hal8188EPhyReg.h  |  4 +--
 .../staging/r8188eu/include/rtl8188e_hal.h    |  2 +-
 .../staging/r8188eu/include/rtl8188e_spec.h   |  6 ++--
 drivers/staging/r8188eu/include/rtw_cmd.h     |  4 +--
 drivers/staging/r8188eu/include/rtw_recv.h    |  4 +--
 drivers/staging/r8188eu/include/rtw_xmit.h    |  2 +-
 drivers/staging/r8188eu/include/wifi.h        | 12 +++----
 drivers/staging/r8188eu/os_dep/ioctl_linux.c  |  6 ++--
 15 files changed, 54 insertions(+), 54 deletions(-)

diff --git a/drivers/staging/r8188eu/core/rtw_ioctl_set.c b/drivers/staging/r8188eu/core/rtw_ioctl_set.c
index 55e6b0f41dc3..786431826659 100644
--- a/drivers/staging/r8188eu/core/rtw_ioctl_set.c
+++ b/drivers/staging/r8188eu/core/rtw_ioctl_set.c
@@ -287,7 +287,7 @@ u8 rtw_set_802_11_infrastructure_mode(struct adapter *padapter,

 		if ((*pold_state == Ndis802_11Infrastructure) || (*pold_state == Ndis802_11IBSS)) {
 			if (check_fwstate(pmlmepriv, _FW_LINKED))
-				rtw_indicate_disconnect(padapter); /* will clr Linked_state; before this function, we must have chked whether  issue dis-assoc_cmd or not */
+				rtw_indicate_disconnect(padapter); /* will clr Linked_state; before this function, we must have checked whether issue dis-assoc_cmd or not */
 	       }

 		*pold_state = networktype;
diff --git a/drivers/staging/r8188eu/core/rtw_mlme_ext.c b/drivers/staging/r8188eu/core/rtw_mlme_ext.c
index 07905e2ae8e0..8d5ee98f0880 100644
--- a/drivers/staging/r8188eu/core/rtw_mlme_ext.c
+++ b/drivers/staging/r8188eu/core/rtw_mlme_ext.c
@@ -137,7 +137,7 @@ static struct rt_channel_plan_map	RTW_ChannelPlanMap[RT_CHANNEL_DOMAIN_MAX] = {
 	{0x03},	/* 0x41, RT_CHANNEL_DOMAIN_GLOBAL_DOAMIN_2G */
 };

-static struct rt_channel_plan_map RTW_CHANNEL_PLAN_MAP_REALTEK_DEFINE = {0x03}; /* use the conbination for max channel numbers */
+static struct rt_channel_plan_map RTW_CHANNEL_PLAN_MAP_REALTEK_DEFINE = {0x03}; /* use the combination for max channel numbers */

 /*
  * Search the @param channel_num in given @param channel_set
@@ -1754,7 +1754,7 @@ void issue_p2p_GO_request(struct adapter *padapter, u8 *raddr)
 	p2pie[p2pielen++] = 0x09;	/*	WFA P2P v1.0 */

 	/*	Commented by Albert 20110306 */
-	/*	According to the P2P Specification, the group negoitation request frame should contain 9 P2P attributes */
+	/*	According to the P2P Specification, the group negotiation request frame should contain 9 P2P attributes */
 	/*	1. P2P Capability */
 	/*	2. Group Owner Intent */
 	/*	3. Configuration Timeout */
@@ -2109,7 +2109,7 @@ static void issue_p2p_GO_response(struct adapter *padapter, u8 *raddr, u8 *frame
 	p2pie[p2pielen++] = 0x09;	/*	WFA P2P v1.0 */

 	/*	Commented by Albert 20100908 */
-	/*	According to the P2P Specification, the group negoitation response frame should contain 9 P2P attributes */
+	/*	According to the P2P Specification, the group negotiation response frame should contain 9 P2P attributes */
 	/*	1. Status */
 	/*	2. P2P Capability */
 	/*	3. Group Owner Intent */
@@ -2405,7 +2405,7 @@ static void issue_p2p_GO_confirm(struct adapter *padapter, u8 *raddr, u8 result)
 	p2pie[p2pielen++] = 0x09;	/*	WFA P2P v1.0 */

 	/*	Commented by Albert 20110306 */
-	/*	According to the P2P Specification, the group negoitation request frame should contain 5 P2P attributes */
+	/*	According to the P2P Specification, the group negotiation request frame should contain 5 P2P attributes */
 	/*	1. Status */
 	/*	2. P2P Capability */
 	/*	3. Operating Channel */
@@ -4013,7 +4013,7 @@ struct xmit_frame *alloc_mgtxmitframe(struct xmit_priv *pxmitpriv)

 /****************************************************************************

-Following are some TX fuctions for WiFi MLME
+Following are some TX functions for WiFi MLME

 *****************************************************************************/

@@ -4615,7 +4615,7 @@ int issue_probereq_ex(struct adapter *padapter, struct ndis_802_11_ssid *pssid,
 	return ret;
 }

-/*  if psta == NULL, indiate we are station(client) now... */
+/*  if psta == NULL, indicate we are station (client) now... */
 void issue_auth(struct adapter *padapter, struct sta_info *psta, unsigned short status)
 {
 	struct xmit_frame *pmgntframe;
@@ -5014,7 +5014,7 @@ void issue_assocreq(struct adapter *padapter)
 				if (!padapter->registrypriv.wifi_spec) {
 					/* Commented by Kurt 20110629 */
 					/* In some older APs, WPS handshake */
-					/* would be fail if we append vender extensions informations to AP */
+					/* would be fail if we append vendor extension information to AP */
 					if (!memcmp(pIE->data, WPS_OUI, 4))
 						pIE->Length = 14;
 				}
@@ -5169,7 +5169,7 @@ void issue_assocreq(struct adapter *padapter)
 		kfree(pmlmepriv->assoc_req);
 }

-/* when wait_ack is ture, this function shoule be called at process context */
+/* when wait_ack is true, this function should be called at process context */
 static int _issue_nulldata(struct adapter *padapter, unsigned char *da, unsigned int power_mode, int wait_ack)
 {
 	int ret = _FAIL;
@@ -5238,7 +5238,7 @@ static int _issue_nulldata(struct adapter *padapter, unsigned char *da, unsigned
 	return ret;
 }

-/* when wait_ms > 0 , this function shoule be called at process context */
+/* when wait_ms > 0, this function should be called at process context */
 /* da == NULL for station mode */
 int issue_nulldata(struct adapter *padapter, unsigned char *da, unsigned int power_mode, int try_cnt, int wait_ms)
 {
@@ -5247,7 +5247,7 @@ int issue_nulldata(struct adapter *padapter, unsigned char *da, unsigned int pow
 	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
 	struct mlme_ext_info	*pmlmeinfo = &pmlmeext->mlmext_info;

-	/* da == NULL, assum it's null data for sta to ap*/
+	/* da == NULL, assume it's null data for sta to ap*/
 	if (!da)
 		da = get_my_bssid(&pmlmeinfo->network);

@@ -5271,7 +5271,7 @@ int issue_nulldata(struct adapter *padapter, unsigned char *da, unsigned int pow
 	return ret;
 }

-/* when wait_ack is ture, this function shoule be called at process context */
+/* when wait_ack is true, this function should be called at process context */
 static int _issue_qos_nulldata(struct adapter *padapter, unsigned char *da, u16 tid, int wait_ack)
 {
 	int ret = _FAIL;
@@ -5344,7 +5344,7 @@ static int _issue_qos_nulldata(struct adapter *padapter, unsigned char *da, u16
 	return ret;
 }

-/* when wait_ms > 0 , this function shoule be called at process context */
+/* when wait_ms > 0 , this function should be called at process context */
 /* da == NULL for station mode */
 int issue_qos_nulldata(struct adapter *padapter, unsigned char *da, u16 tid, int try_cnt, int wait_ms)
 {
@@ -5353,7 +5353,7 @@ int issue_qos_nulldata(struct adapter *padapter, unsigned char *da, u16 tid, int
 	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
 	struct mlme_ext_info	*pmlmeinfo = &pmlmeext->mlmext_info;

-	/* da == NULL, assum it's null data for sta to ap*/
+	/* da == NULL, assume it's null data for sta to ap*/
 	if (!da)
 		da = get_my_bssid(&pmlmeinfo->network);

@@ -5885,7 +5885,7 @@ static void rtw_set_opmode(struct adapter *adapter, u8 mode)

 /****************************************************************************

-Following are some utitity fuctions for WiFi MLME
+Following are some utility functions for WiFi MLME

 *****************************************************************************/

@@ -6058,7 +6058,7 @@ void site_survey(struct adapter *padapter)
 		} else {
 			/*  20100721:Interrupt scan operation here. */
 			/*  For SW antenna diversity before link, it needs to switch to another antenna and scan again. */
-			/*  It compares the scan result and select beter one to do connection. */
+			/*  It compares the scan result and selects a better one to do connection. */
 			if (AntDivBeforeLink8188E(padapter)) {
 				pmlmeext->sitesurvey_res.bss_cnt = 0;
 				pmlmeext->sitesurvey_res.channel_idx = -1;
@@ -6328,7 +6328,7 @@ void start_create_ibss(struct adapter *padapter)
 	/* update wireless mode */
 	update_wireless_mode(padapter);

-	/* udpate capability */
+	/* update capability */
 	caps = rtw_get_capability((struct wlan_bssid_ex *)pnetwork);
 	update_capinfo(padapter, caps);
 	if (caps & cap_IBSS) {/* adhoc master */
@@ -6378,7 +6378,7 @@ void start_clnt_join(struct adapter *padapter)
 	/* update wireless mode */
 	update_wireless_mode(padapter);

-	/* udpate capability */
+	/* update capability */
 	caps = rtw_get_capability((struct wlan_bssid_ex *)pnetwork);
 	update_capinfo(padapter, caps);
 	if (caps & cap_ESS) {
@@ -6972,7 +6972,7 @@ void mlmeext_joinbss_event_callback(struct adapter *padapter, int join_res)
 	/* BCN interval */
 	rtw_write16(padapter, REG_BCN_INTERVAL, pmlmeinfo->bcn_interval);

-	/* udpate capability */
+	/* update capability */
 	update_capinfo(padapter, pmlmeinfo->capability);

 	/* WMM, Update EDCA param */
diff --git a/drivers/staging/r8188eu/core/rtw_recv.c b/drivers/staging/r8188eu/core/rtw_recv.c
index bb5c3b3888e0..4b68a543f68b 100644
--- a/drivers/staging/r8188eu/core/rtw_recv.c
+++ b/drivers/staging/r8188eu/core/rtw_recv.c
@@ -972,7 +972,7 @@ static void validate_recv_ctrl_frame(struct adapter *padapter,
 			if (psta->sleepq_len == 0) {
 				pstapriv->tim_bitmap &= ~BIT(psta->aid);

-				/* upate BCN for TIM IE */
+				/* update BCN for TIM IE */
 				/* update_BCNTIM(padapter); */
 				update_beacon(padapter, _TIM_IE_, NULL, false);
 			}
@@ -986,7 +986,7 @@ static void validate_recv_ctrl_frame(struct adapter *padapter,

 				pstapriv->tim_bitmap &= ~BIT(psta->aid);

-				/* upate BCN for TIM IE */
+				/* update BCN for TIM IE */
 				/* update_BCNTIM(padapter); */
 				update_beacon(padapter, _TIM_IE_, NULL, false);
 			}
@@ -1984,13 +1984,13 @@ static void rtw_signal_stat_timer_hdl(struct timer_list *t)
 	} else {
 		if (recvpriv->signal_strength_data.update_req == 0) {/*  update_req is clear, means we got rx */
 			avg_signal_strength = recvpriv->signal_strength_data.avg_val;
-			/*  after avg_vals are accquired, we can re-stat the signal values */
+			/*  after avg_vals are acquired, we can re-stat the signal values */
 			recvpriv->signal_strength_data.update_req = 1;
 		}

 		if (recvpriv->signal_qual_data.update_req == 0) {/*  update_req is clear, means we got rx */
 			avg_signal_qual = recvpriv->signal_qual_data.avg_val;
-			/*  after avg_vals are accquired, we can re-stat the signal values */
+			/*  after avg_vals are acquired, we can re-stat the signal values */
 			recvpriv->signal_qual_data.update_req = 1;
 		}

diff --git a/drivers/staging/r8188eu/hal/HalPhyRf_8188e.c b/drivers/staging/r8188eu/hal/HalPhyRf_8188e.c
index 525deab10820..60cdfcf80daa 100644
--- a/drivers/staging/r8188eu/hal/HalPhyRf_8188e.c
+++ b/drivers/staging/r8188eu/hal/HalPhyRf_8188e.c
@@ -69,7 +69,7 @@ void ODM_TxPwrTrackAdjust88E(struct odm_dm_struct *dm_odm, u8 Type,/*  0 = OFDM,
 /*-----------------------------------------------------------------------------
  * Function:	odm_TxPwrTrackSetPwr88E()
  *
- * Overview:	88E change all channel tx power accordign to flag.
+ * Overview:	88E change all channel tx power according to flag.
  *				OFDM & CCK are all different.
  *
  * Input:		NONE
diff --git a/drivers/staging/r8188eu/hal/odm_RTL8188E.c b/drivers/staging/r8188eu/hal/odm_RTL8188E.c
index c8a3c521bd60..dd9c8291f025 100644
--- a/drivers/staging/r8188eu/hal/odm_RTL8188E.c
+++ b/drivers/staging/r8188eu/hal/odm_RTL8188E.c
@@ -194,7 +194,7 @@ static void odm_HWAntDiv(struct odm_dm_struct *dm_odm)
 	for (i = 0; i < ODM_ASSOCIATE_ENTRY_NUM; i++) {
 		pEntry = dm_odm->pODM_StaInfo[i];
 		if (IS_STA_VALID(pEntry)) {
-			/* 2 Caculate RSSI per Antenna */
+			/* 2 Calculate RSSI per Antenna */
 			Main_RSSI = (dm_fat_tbl->MainAnt_Cnt[i] != 0) ? (dm_fat_tbl->MainAnt_Sum[i] / dm_fat_tbl->MainAnt_Cnt[i]) : 0;
 			Aux_RSSI = (dm_fat_tbl->AuxAnt_Cnt[i] != 0) ? (dm_fat_tbl->AuxAnt_Sum[i] / dm_fat_tbl->AuxAnt_Cnt[i]) : 0;
 			TargetAnt = (Main_RSSI >= Aux_RSSI) ? MAIN_ANT : AUX_ANT;
diff --git a/drivers/staging/r8188eu/hal/rtl8188e_hal_init.c b/drivers/staging/r8188eu/hal/rtl8188e_hal_init.c
index 158260547f2b..cc29963f4b49 100644
--- a/drivers/staging/r8188eu/hal/rtl8188e_hal_init.c
+++ b/drivers/staging/r8188eu/hal/rtl8188e_hal_init.c
@@ -355,7 +355,7 @@ void rtl8188e_EfusePowerSwitch(struct adapter *pAdapter, u8 PwrState)
 	if (PwrState) {
 		rtw_write8(pAdapter, REG_EFUSE_ACCESS, EFUSE_ACCESS_ON);

-		/*  1.2V Power: From VDDON with Power Cut(0x0000h[15]), defualt valid */
+		/*  1.2V Power: From VDDON with Power Cut(0x0000h[15]), default valid */
 		res = rtw_read16(pAdapter, REG_SYS_ISO_CTRL, &tmpV16);
 		if (res)
 			return;
diff --git a/drivers/staging/r8188eu/hal/rtl8188e_phycfg.c b/drivers/staging/r8188eu/hal/rtl8188e_phycfg.c
index 532c63bce0bf..b7f3c7a670fb 100644
--- a/drivers/staging/r8188eu/hal/rtl8188e_phycfg.c
+++ b/drivers/staging/r8188eu/hal/rtl8188e_phycfg.c
@@ -23,7 +23,7 @@ static u32 phy_calculate_bit_shift(u32 bitmask)
 /**
 * Function:	PHY_QueryBBReg
 *
-* OverView:	Read "sepcific bits" from BB register
+* Overview:	Read "sepcific bits" from BB register
 *
 * Input:
 *			struct adapter *Adapter,
@@ -56,7 +56,7 @@ rtl8188e_PHY_QueryBBReg(
 /**
 * Function:	PHY_SetBBReg
 *
-* OverView:	Write "Specific bits" to BB register (page 8~)
+* Overview:	Write "Specific bits" to BB register (page 8~)
 *
 * Input:
 *			struct adapter *Adapter,
@@ -94,7 +94,7 @@ void rtl8188e_PHY_SetBBReg(struct adapter *Adapter, u32 RegAddr, u32 BitMask, u3
 /**
 * Function:	phy_RFSerialRead
 *
-* OverView:	Read regster from RF chips
+* Overview:	Read register from RF chips
 *
 * Input:
 *			struct adapter *Adapter,
@@ -160,7 +160,7 @@ phy_RFSerialRead(
 /**
 * Function:	phy_RFSerialWrite
 *
-* OverView:	Write data to RF register (page 8~)
+* Overview:	Write data to RF register (page 8~)
 *
 * Input:
 *			struct adapter *Adapter,
@@ -235,7 +235,7 @@ phy_RFSerialWrite(
 /**
 * Function:	PHY_QueryRFReg
 *
-* OverView:	Query "Specific bits" to RF register (page 8~)
+* Overview:	Query "Specific bits" to RF register (page 8~)
 *
 * Input:
 *			struct adapter *Adapter,
@@ -261,7 +261,7 @@ u32 rtl8188e_PHY_QueryRFReg(struct adapter *Adapter, u32 RegAddr, u32 BitMask)
 /**
 * Function:	PHY_SetRFReg
 *
-* OverView:	Write "Specific bits" to RF register (page 8~)
+* Overview:	Write "Specific bits" to RF register (page 8~)
 *
 * Input:
 *			struct adapter *Adapter,
@@ -335,7 +335,7 @@ s32 PHY_MACConfig8188E(struct adapter *Adapter)
 /**
 * Function:	phy_InitBBRFRegisterDefinition
 *
-* OverView:	Initialize Register definition offset for Radio Path A/B/C/D
+* Overview:	Initialize Register definition offset for Radio Path A/B/C/D
 *
 * Input:
 *			struct adapter *Adapter,
@@ -363,7 +363,7 @@ phy_InitBBRFRegisterDefinition(
 	/*  RF Interface (Output and)  Enable */
 	pHalData->PHYRegDef.rfintfe = rFPGA0_XA_RFInterfaceOE; /*  16 MSBs if read 32-bit from 0x860 (16-bit for 0x862) */

-	/* Addr of LSSI. Wirte RF register by driver */
+	/* Addr of LSSI. Write RF register by driver */
 	pHalData->PHYRegDef.rf3wireOffset = rFPGA0_XA_LSSIParameter; /* LSSI Parameter */

 	/*  RF parameter */
diff --git a/drivers/staging/r8188eu/include/Hal8188EPhyReg.h b/drivers/staging/r8188eu/include/Hal8188EPhyReg.h
index 8b8c75a1f149..da2329be4474 100644
--- a/drivers/staging/r8188eu/include/Hal8188EPhyReg.h
+++ b/drivers/staging/r8188eu/include/Hal8188EPhyReg.h
@@ -92,7 +92,7 @@
 #define	rFPGA0_AdDaClockEn		0x888
 #define	rFPGA0_AnalogParameter4		0x88c

-#define	rFPGA0_XA_LSSIReadBack		0x8a0	/*  Tranceiver LSSI Readback */
+#define	rFPGA0_XA_LSSIReadBack		0x8a0	/*  Transceiver LSSI Readback */
 #define	rFPGA0_XB_LSSIReadBack		0x8a4
 #define	rFPGA0_XC_LSSIReadBack		0x8a8
 #define	rFPGA0_XD_LSSIReadBack		0x8ac
@@ -167,7 +167,7 @@

 /* RxIQ DC offset, Rx digital filter, DC notch filter */
 #define	rOFDM0_XARxAFE			0xc10
-#define	rOFDM0_XARxIQImbalance		0xc14  /* RxIQ imblance matrix */
+#define	rOFDM0_XARxIQImbalance		0xc14  /* RxIQ imbalance matrix */
 #define	rOFDM0_XBRxAFE			0xc18
 #define	rOFDM0_XBRxIQImbalance		0xc1c
 #define	rOFDM0_XCRxAFE			0xc20
diff --git a/drivers/staging/r8188eu/include/rtl8188e_hal.h b/drivers/staging/r8188eu/include/rtl8188e_hal.h
index ed4091e7cc7e..25f9200b1151 100644
--- a/drivers/staging/r8188eu/include/rtl8188e_hal.h
+++ b/drivers/staging/r8188eu/include/rtl8188e_hal.h
@@ -88,7 +88,7 @@ struct txpowerinfo24g {
 /*  9bytes + 1byt + 5bytes and pre 1byte. */
 /*  For worst case: */
 /*  | 2byte|----8bytes----|1byte|--7bytes--| 92D */
-/*  PG data exclude header, dummy 7 bytes frome CP test and reserved 1byte. */
+/*  PG data exclude header, dummy 7 bytes from CP test and reserved 1byte. */
 #define		EFUSE_OOB_PROTECT_BYTES_88E	18

 #define EFUSE_PROTECT_BYTES_BANK	16
diff --git a/drivers/staging/r8188eu/include/rtl8188e_spec.h b/drivers/staging/r8188eu/include/rtl8188e_spec.h
index e34619140e33..e34ecdc09688 100644
--- a/drivers/staging/r8188eu/include/rtl8188e_spec.h
+++ b/drivers/staging/r8188eu/include/rtl8188e_spec.h
@@ -4,7 +4,7 @@
 #ifndef __RTL8188E_SPEC_H__
 #define __RTL8188E_SPEC_H__

-/*        8192C Regsiter offset definition */
+/*        8192C Register offset definition */

 #define		HAL_PS_TIMER_INT_DELAY	50	/*   50 microseconds */
 #define		HAL_92C_NAV_UPPER_UNIT	128	/*  micro-second */
@@ -674,7 +674,7 @@ Current IOREG MAP

 #define REG_USB_HRPWM			0xFE58
 #define REG_USB_HCPWM			0xFE57
-/*        8192C Regsiter Bit and Content definition */
+/*        8192C Register Bit and Content definition */
 /* 	0x0000h ~ 0x00FFh	System Configuration */

 /* 2 SYS_ISO_CTRL */
@@ -1135,7 +1135,7 @@ Current IOREG MAP
 #define EEPROM_Default_CrystalCap_88E		0x20
 #define	EEPROM_Default_ThermalMeter_88E		0x18

-/* New EFUSE deafult value */
+/* New EFUSE default value */
 #define		EEPROM_DEFAULT_24G_INDEX	0x2D
 #define		EEPROM_DEFAULT_24G_HT20_DIFF	0X02
 #define		EEPROM_DEFAULT_24G_OFDM_DIFF	0X04
diff --git a/drivers/staging/r8188eu/include/rtw_cmd.h b/drivers/staging/r8188eu/include/rtw_cmd.h
index 9a76aa85de94..d0d6c53e2aa7 100644
--- a/drivers/staging/r8188eu/include/rtw_cmd.h
+++ b/drivers/staging/r8188eu/include/rtw_cmd.h
@@ -455,7 +455,7 @@ struct Tx_Beacon_param

 	mac[0] == 0
 	==> CMD mode, return H2C_SUCCESS.
-	The following condition must be ture under CMD mode
+	The following condition must be true under CMD mode
 		mac[1] == mac[4], mac[2] == mac[3], mac[0]=mac[5]= 0;
 		s0 == 0x1234, s1 == 0xabcd, w0 == 0x78563412, w1 == 0x5aa5def7;
 		s2 == (b1 << 8 | b0);
@@ -508,7 +508,7 @@ struct drvextra_cmd_parm {
 	unsigned char *pbuf;
 };

-/*------------------- Below are used for RF/BB tunning ---------------------*/
+/*------------------- Below are used for RF/BB tuning ---------------------*/

 struct	setantenna_parm {
 	u8	tx_antset;
diff --git a/drivers/staging/r8188eu/include/rtw_recv.h b/drivers/staging/r8188eu/include/rtw_recv.h
index 7768b0c5988c..12026431a3d2 100644
--- a/drivers/staging/r8188eu/include/rtw_recv.h
+++ b/drivers/staging/r8188eu/include/rtw_recv.h
@@ -92,7 +92,7 @@ struct rx_pkt_attrib {
 	u8	privacy; /* in frame_ctrl field */
 	u8	bdecrypted;
 	u8	encrypt; /* when 0 indicate no encrypt. when non-zero,
-			  * indicate the encrypt algorith */
+			  * indicate the encrypt algorithm */
 	u8	iv_len;
 	u8	icv_len;
 	u8	crc_err;
@@ -175,7 +175,7 @@ struct recv_priv {
 	u8 *precv_buf;    /*  4 alignment */
 	struct __queue free_recv_buf_queue;
 	u32	free_recv_buf_queue_cnt;
-	/* For display the phy informatiom */
+	/* For display the phy information */
 	u8 is_signal_dbg;	/*  for debug */
 	u8 signal_strength_dbg;	/*  for debug */
 	s8 rssi;
diff --git a/drivers/staging/r8188eu/include/rtw_xmit.h b/drivers/staging/r8188eu/include/rtw_xmit.h
index 82efcd54af3f..cff065554608 100644
--- a/drivers/staging/r8188eu/include/rtw_xmit.h
+++ b/drivers/staging/r8188eu/include/rtw_xmit.h
@@ -116,7 +116,7 @@ struct pkt_attrib {
 	u32	last_txcmdsz;
 	u8	nr_frags;
 	u8	encrypt;	/* when 0 indicate no encrypt. when non-zero,
-				 * indicate the encrypt algorith */
+				 * indicate the encrypt algorithm */
 	u8	iv_len;
 	u8	icv_len;
 	u8	iv[18];
diff --git a/drivers/staging/r8188eu/include/wifi.h b/drivers/staging/r8188eu/include/wifi.h
index 0254310bdf44..381385a7e118 100644
--- a/drivers/staging/r8188eu/include/wifi.h
+++ b/drivers/staging/r8188eu/include/wifi.h
@@ -701,7 +701,7 @@ struct ADDBA_request {

 #define	P2P_WILDCARD_SSID_LEN			7

-/* default value, used when: (1)p2p disabed or (2)p2p enabled
+/* default value, used when: (1)p2p disabled or (2)p2p enabled
  * but only do 1 scan phase */
 #define	P2P_FINDPHASE_EX_NONE		0
 /*  used when p2p enabled and want to do 1 scan phase and
@@ -766,11 +766,11 @@ enum P2P_STATE {
 	P2P_STATE_TX_PROVISION_DIS_REQ = 6,
 	P2P_STATE_RX_PROVISION_DIS_RSP = 7,
 	P2P_STATE_RX_PROVISION_DIS_REQ = 8,
-	/* Doing the group owner negoitation handshake */
+	/* Doing the group owner negotiation handshake */
 	P2P_STATE_GONEGO_ING = 9,
-	/* finish the group negoitation handshake with success */
+	/* finish the group negotiation handshake with success */
 	P2P_STATE_GONEGO_OK = 10,
-	/* finish the group negoitation handshake with failure */
+	/* finish the group negotiation handshake with failure */
 	P2P_STATE_GONEGO_FAIL = 11,
 	/* receiving the P2P Inviation request and match with the profile. */
 	P2P_STATE_RECV_INVITE_REQ_MATCH = 12,
@@ -790,9 +790,9 @@ enum P2P_STATE {
 	P2P_STATE_RECV_INVITE_REQ_JOIN = 19,
 	/* recveing the P2P Inviation response with failure */
 	P2P_STATE_RX_INVITE_RESP_FAIL = 20,
-	/* receiving p2p negoitation response with information is not available */
+	/* receiving p2p negotiation response with information is not available */
 	P2P_STATE_RX_INFOR_NOREADY = 21,
-	/* sending p2p negoitation response with information is not available */
+	/* sending p2p negotiation response with information is not available */
 	P2P_STATE_TX_INFOR_NOREADY = 22,
 };

diff --git a/drivers/staging/r8188eu/os_dep/ioctl_linux.c b/drivers/staging/r8188eu/os_dep/ioctl_linux.c
index 2de2e1e32738..8516e253bb03 100644
--- a/drivers/staging/r8188eu/os_dep/ioctl_linux.c
+++ b/drivers/staging/r8188eu/os_dep/ioctl_linux.c
@@ -2647,7 +2647,7 @@ static int rtw_p2p_connect(struct net_device *dev,
 	u32 peer_channel = 0;

 	/*	Commented by Albert 20110304 */
-	/*	The input data contains two informations. */
+	/*	The input data contains two information. */
 	/*	1. First information is the MAC address which wants to formate with */
 	/*	2. Second information is the WPS PINCode or "pbc" string for push button method */
 	/*	Format: 00:E0:4C:00:00:05 */
@@ -2721,7 +2721,7 @@ static void rtw_p2p_invite_req(struct net_device *dev,
 	uint p2pielen = 0, attr_contentlen = 0;
 	struct tx_invite_req_info *pinvite_req_info = &pwdinfo->invitereq_info;

-	/*	The input data contains two informations. */
+	/*	The input data contains two information items. */
 	/*	1. First information is the P2P device address which you want to send to. */
 	/*	2. Second information is the group id which combines with GO's mac address, space and GO's ssid. */
 	/*	Command line sample: iwpriv wlan0 p2p_set invite ="00:11:22:33:44:55 00:E0:4C:00:00:05 DIRECT-xy" */
@@ -2845,7 +2845,7 @@ static void rtw_p2p_prov_disc(struct net_device *dev,
 	u8 *p2pie;
 	uint p2pielen = 0, attr_contentlen = 0;

-	/*	The input data contains two informations. */
+	/*	The input data contains two information items. */
 	/*	1. First information is the MAC address which wants to issue the provisioning discovery request frame. */
 	/*	2. Second information is the WPS configuration method which wants to discovery */
 	/*	Format: 00:E0:4C:00:00:05_display */
--
2.30.2

[PATCH v4 06/11] staging: r8188eu: Add space between function & macro parameters

[Deepak R Varma]

Space required between function and macro parameters to improve code
readability. This Linux kernel coding style guideline resolves following
error reported by checkpatch script:
	ERROR: space required after that ',' (ctx:VxV)

Signed-off-by: Deepak R Varma <drv@mailo.com>
---

Changes in v4:
   1. Implement corrections provided by julia.lawall@inria.fr

Changes in v3:
   1. Patch newly added to the patch set.

 .../staging/r8188eu/include/osdep_service.h   |  4 +--
 .../staging/r8188eu/include/rtl8188e_hal.h    |  2 +-
 drivers/staging/r8188eu/include/rtw_cmd.h     | 18 ++++++------
 drivers/staging/r8188eu/include/rtw_io.h      | 28 +++++++++----------
 4 files changed, 26 insertions(+), 26 deletions(-)

diff --git a/drivers/staging/r8188eu/include/osdep_service.h b/drivers/staging/r8188eu/include/osdep_service.h
index 72990a1cdc66..ec2631455f08 100644
--- a/drivers/staging/r8188eu/include/osdep_service.h
+++ b/drivers/staging/r8188eu/include/osdep_service.h
@@ -53,7 +53,7 @@ static inline struct list_head *get_list_head(struct __queue *queue)
 	return (&(queue->queue));
 }

-static inline void _set_timer(struct timer_list *ptimer,u32 delay_time)
+static inline void _set_timer(struct timer_list *ptimer, u32 delay_time)
 {
 	mod_timer(ptimer, jiffies + msecs_to_jiffies(delay_time));
 }
@@ -108,7 +108,7 @@ void rtw_free_netdev(struct net_device *netdev);
 #define FUNC_ADPT_FMT "%s(%s)"
 #define FUNC_ADPT_ARG(adapter) __func__, adapter->pnetdev->name

-#define rtw_signal_process(pid, sig) kill_pid(find_vpid((pid)),(sig), 1)
+#define rtw_signal_process(pid, sig) kill_pid(find_vpid((pid)), (sig), 1)

 /* Macros for handling unaligned memory accesses */

diff --git a/drivers/staging/r8188eu/include/rtl8188e_hal.h b/drivers/staging/r8188eu/include/rtl8188e_hal.h
index 25f9200b1151..577cd3f4f797 100644
--- a/drivers/staging/r8188eu/include/rtl8188e_hal.h
+++ b/drivers/staging/r8188eu/include/rtl8188e_hal.h
@@ -165,7 +165,7 @@ void Hal_ReadTxPowerInfo88E(struct adapter *padapter, u8 *hwinfo,

 void rtl8188e_EfuseParseChnlPlan(struct adapter *padapter, u8 *hwinfo,
 				 bool AutoLoadFail);
-void Hal_ReadAntennaDiversity88E(struct adapter *pAdapter,u8 *PROMContent,
+void Hal_ReadAntennaDiversity88E(struct adapter *pAdapter, u8 *PROMContent,
 				 bool AutoLoadFail);
 void Hal_ReadThermalMeter_88E(struct adapter *	dapter, u8 *PROMContent,
 			      bool AutoloadFail);
diff --git a/drivers/staging/r8188eu/include/rtw_cmd.h b/drivers/staging/r8188eu/include/rtw_cmd.h
index d0d6c53e2aa7..8495ce1719ac 100644
--- a/drivers/staging/r8188eu/include/rtw_cmd.h
+++ b/drivers/staging/r8188eu/include/rtw_cmd.h
@@ -730,17 +730,17 @@ struct TDLSoption_param
 #define H2C_CMD_OVERFLOW	0x06
 #define H2C_RESERVED		0x07

-u8 rtw_sitesurvey_cmd(struct adapter  *padapter, struct ndis_802_11_ssid *ssid, int ssid_num);
-u8 rtw_createbss_cmd(struct adapter  *padapter);
+u8 rtw_sitesurvey_cmd(struct adapter *padapter, struct ndis_802_11_ssid *ssid, int ssid_num);
+u8 rtw_createbss_cmd(struct adapter *padapter);
 u8 rtw_setstakey_cmd(struct adapter *padapter, u8 *psta, u8 unicast_key);
 u8 rtw_clearstakey_cmd(struct adapter *padapter, u8 *psta, u8 entry, u8 enqueue);
-u8 rtw_joinbss_cmd(struct adapter  *padapter, struct wlan_network* pnetwork);
+u8 rtw_joinbss_cmd(struct adapter *padapter, struct wlan_network* pnetwork);
 u8 rtw_disassoc_cmd(struct adapter *padapter, u32 deauth_timeout_ms, bool enqueue);
-u8 rtw_setopmode_cmd(struct adapter  *padapter, enum ndis_802_11_network_infra networktype);
-u8 rtw_setdatarate_cmd(struct adapter  *padapter, u8 *rateset);
-u8 rtw_setrfintfs_cmd(struct adapter  *padapter, u8 mode);
+u8 rtw_setopmode_cmd(struct adapter *padapter, enum ndis_802_11_network_infra networktype);
+u8 rtw_setdatarate_cmd(struct adapter *padapter, u8 *rateset);
+u8 rtw_setrfintfs_cmd(struct adapter *padapter, u8 mode);

-u8 rtw_gettssi_cmd(struct adapter  *padapter, u8 offset,u8 *pval);
+u8 rtw_gettssi_cmd(struct adapter *padapter, u8 offset, u8 *pval);
 u8 rtw_setfwdig_cmd(struct adapter*padapter, u8 type);
 u8 rtw_setfwra_cmd(struct adapter*padapter, u8 type);

@@ -751,10 +751,10 @@ u8 rtw_dynamic_chk_wk_cmd(struct adapter *adapter);
 u8 rtw_lps_ctrl_wk_cmd(struct adapter*padapter, u8 lps_ctrl_type, u8 enqueue);
 u8 rtw_rpt_timer_cfg_cmd(struct adapter*padapter, u16 minRptTime);

- u8 rtw_antenna_select_cmd(struct adapter*padapter, u8 antenna,u8 enqueue);
+u8 rtw_antenna_select_cmd(struct adapter*padapter, u8 antenna, u8 enqueue);
 u8 rtw_ps_cmd(struct adapter*padapter);

-u8 rtw_chk_hi_queue_cmd(struct adapter*padapter);
+u8 rtw_chk_hi_queue_cmd(struct adapter *padapter);

 u8 rtw_set_chplan_cmd(struct adapter *padapter, u8 chplan);

diff --git a/drivers/staging/r8188eu/include/rtw_io.h b/drivers/staging/r8188eu/include/rtw_io.h
index 925c7967ac04..87fcf6c94ff3 100644
--- a/drivers/staging/r8188eu/include/rtw_io.h
+++ b/drivers/staging/r8188eu/include/rtw_io.h
@@ -209,7 +209,7 @@ struct io_priv {
 };

 uint ioreq_flush(struct adapter *adapter, struct io_queue *ioqueue);
-void sync_ioreq_enqueue(struct io_req *preq,struct io_queue *ioqueue);
+void sync_ioreq_enqueue(struct io_req *preq, struct io_queue *ioqueue);
 uint sync_ioreq_flush(struct adapter *adapter, struct io_queue *ioqueue);
 uint free_ioreq(struct io_req *preq, struct io_queue *pio_queue);
 struct io_req *alloc_ioreq(struct io_queue *pio_q);
@@ -285,18 +285,18 @@ void bus_sync_io(struct io_queue *pio_q);
 u32 _ioreq2rwmem(struct io_queue *pio_q);
 void dev_power_down(struct adapter *Adapter, u8 bpwrup);

-#define PlatformEFIOWrite1Byte(_a,_b,_c)		\
-	rtw_write8(_a,_b,_c)
-#define PlatformEFIOWrite2Byte(_a,_b,_c)		\
-	rtw_write16(_a,_b,_c)
-#define PlatformEFIOWrite4Byte(_a,_b,_c)		\
-	rtw_write32(_a,_b,_c)
-
-#define PlatformEFIORead1Byte(_a,_b)		\
-		rtw_read8(_a,_b)
-#define PlatformEFIORead2Byte(_a,_b)		\
-		rtw_read16(_a,_b)
-#define PlatformEFIORead4Byte(_a,_b)		\
-		rtw_read32(_a,_b)
+#define PlatformEFIOWrite1Byte(_a, _b, _c)		\
+	rtw_write8(_a, _b, _c)
+#define PlatformEFIOWrite2Byte(_a, _b, _c)		\
+	rtw_write16(_a, _b, _c)
+#define PlatformEFIOWrite4Byte(_a, _b, _c)		\
+	rtw_write32(_a, _b, _c)
+
+#define PlatformEFIORead1Byte(_a, _b)		\
+		rtw_read8(_a, _b)
+#define PlatformEFIORead2Byte(_a, _b)		\
+		rtw_read16(_a, _b)
+#define PlatformEFIORead4Byte(_a, _b)		\
+		rtw_read32(_a, _b)

 #endif	/* _RTL8711_IO_H_ */
--
2.30.2

[PATCH v4 07/11] staging: r8188eu: Associate pointer symbol with parameter name

[Deepak R Varma]

The pointer symbol '*' should be associated with the function parameter
name and not its type. This improves code readability and adheres to the
coding-style guidelines. Address following checkpatch reported error:
	ERROR: "foo *   bar" should be "foo *bar"

While in there, update parameter name at one place to match other function
declarations.

Signed-off-by: Deepak R Varma <drv@mailo.com>
---

Changes in v4:
   -- None.

Changes in v3:
   1. Patch newly added to the patch set.



 drivers/staging/r8188eu/include/rtl8188e_hal.h  |  2 +-
 drivers/staging/r8188eu/include/rtw_cmd.h       | 16 ++++++++--------
 drivers/staging/r8188eu/include/rtw_ioctl_set.h |  4 ++--
 drivers/staging/r8188eu/include/rtw_mlme.h      |  2 +-
 drivers/staging/r8188eu/include/rtw_mlme_ext.h  |  8 ++++----
 5 files changed, 16 insertions(+), 16 deletions(-)

diff --git a/drivers/staging/r8188eu/include/rtl8188e_hal.h b/drivers/staging/r8188eu/include/rtl8188e_hal.h
index 577cd3f4f797..ae33a0f8b5ce 100644
--- a/drivers/staging/r8188eu/include/rtl8188e_hal.h
+++ b/drivers/staging/r8188eu/include/rtl8188e_hal.h
@@ -167,7 +167,7 @@ void rtl8188e_EfuseParseChnlPlan(struct adapter *padapter, u8 *hwinfo,
 				 bool AutoLoadFail);
 void Hal_ReadAntennaDiversity88E(struct adapter *pAdapter, u8 *PROMContent,
 				 bool AutoLoadFail);
-void Hal_ReadThermalMeter_88E(struct adapter *	dapter, u8 *PROMContent,
+void Hal_ReadThermalMeter_88E(struct adapter *padapter, u8 *PROMContent,
 			      bool AutoloadFail);
 void Hal_EfuseParseXtal_8188E(struct adapter *pAdapter, u8 *hwinfo,
 			      bool AutoLoadFail);
diff --git a/drivers/staging/r8188eu/include/rtw_cmd.h b/drivers/staging/r8188eu/include/rtw_cmd.h
index 8495ce1719ac..61fb523afb08 100644
--- a/drivers/staging/r8188eu/include/rtw_cmd.h
+++ b/drivers/staging/r8188eu/include/rtw_cmd.h
@@ -734,25 +734,25 @@ u8 rtw_sitesurvey_cmd(struct adapter *padapter, struct ndis_802_11_ssid *ssid, i
 u8 rtw_createbss_cmd(struct adapter *padapter);
 u8 rtw_setstakey_cmd(struct adapter *padapter, u8 *psta, u8 unicast_key);
 u8 rtw_clearstakey_cmd(struct adapter *padapter, u8 *psta, u8 entry, u8 enqueue);
-u8 rtw_joinbss_cmd(struct adapter *padapter, struct wlan_network* pnetwork);
+u8 rtw_joinbss_cmd(struct adapter *padapter, struct wlan_network *pnetwork);
 u8 rtw_disassoc_cmd(struct adapter *padapter, u32 deauth_timeout_ms, bool enqueue);
 u8 rtw_setopmode_cmd(struct adapter *padapter, enum ndis_802_11_network_infra networktype);
 u8 rtw_setdatarate_cmd(struct adapter *padapter, u8 *rateset);
 u8 rtw_setrfintfs_cmd(struct adapter *padapter, u8 mode);

 u8 rtw_gettssi_cmd(struct adapter *padapter, u8 offset, u8 *pval);
-u8 rtw_setfwdig_cmd(struct adapter*padapter, u8 type);
-u8 rtw_setfwra_cmd(struct adapter*padapter, u8 type);
+u8 rtw_setfwdig_cmd(struct adapter *padapter, u8 type);
+u8 rtw_setfwra_cmd(struct adapter *padapter, u8 type);

-u8 rtw_addbareq_cmd(struct adapter*padapter, u8 tid, u8 *addr);
+u8 rtw_addbareq_cmd(struct adapter *padapter, u8 tid, u8 *addr);

 u8 rtw_dynamic_chk_wk_cmd(struct adapter *adapter);

-u8 rtw_lps_ctrl_wk_cmd(struct adapter*padapter, u8 lps_ctrl_type, u8 enqueue);
-u8 rtw_rpt_timer_cfg_cmd(struct adapter*padapter, u16 minRptTime);
+u8 rtw_lps_ctrl_wk_cmd(struct adapter *padapter, u8 lps_ctrl_type, u8 enqueue);
+u8 rtw_rpt_timer_cfg_cmd(struct adapter *padapter, u16 minRptTime);

-u8 rtw_antenna_select_cmd(struct adapter*padapter, u8 antenna, u8 enqueue);
-u8 rtw_ps_cmd(struct adapter*padapter);
+u8 rtw_antenna_select_cmd(struct adapter *padapter, u8 antenna, u8 enqueue);
+u8 rtw_ps_cmd(struct adapter *padapter);

 u8 rtw_chk_hi_queue_cmd(struct adapter *padapter);

diff --git a/drivers/staging/r8188eu/include/rtw_ioctl_set.h b/drivers/staging/r8188eu/include/rtw_ioctl_set.h
index 7365079c704f..abe460d6504d 100644
--- a/drivers/staging/r8188eu/include/rtw_ioctl_set.h
+++ b/drivers/staging/r8188eu/include/rtw_ioctl_set.h
@@ -10,10 +10,10 @@ typedef u8 NDIS_802_11_PMKID_VALUE[16];

 u8 rtw_set_802_11_authentication_mode(struct adapter *adapt,
 				      enum ndis_802_11_auth_mode authmode);
-u8 rtw_set_802_11_bssid(struct adapter*adapter, u8 *bssid);
+u8 rtw_set_802_11_bssid(struct adapter *adapter, u8 *bssid);
 u8 rtw_set_802_11_add_wep(struct adapter *adapter, struct ndis_802_11_wep *wep);
 u8 rtw_set_802_11_disassociate(struct adapter *adapter);
-u8 rtw_set_802_11_bssid_list_scan(struct adapter*adapter,
+u8 rtw_set_802_11_bssid_list_scan(struct adapter *adapter,
 				  struct ndis_802_11_ssid *pssid,
 				  int ssid_max_num);
 u8 rtw_set_802_11_infrastructure_mode(struct adapter *adapter,
diff --git a/drivers/staging/r8188eu/include/rtw_mlme.h b/drivers/staging/r8188eu/include/rtw_mlme.h
index b69989cbab21..7658f864136e 100644
--- a/drivers/staging/r8188eu/include/rtw_mlme.h
+++ b/drivers/staging/r8188eu/include/rtw_mlme.h
@@ -547,7 +547,7 @@ void _rtw_free_network(struct mlme_priv *pmlmepriv,
 void _rtw_free_network_nolock(struct mlme_priv *pmlmepriv,
 			      struct wlan_network *pnetwork);

-struct wlan_network* _rtw_find_network(struct __queue *scanned_queue, u8 *addr);
+struct wlan_network *_rtw_find_network(struct __queue *scanned_queue, u8 *addr);

 void _rtw_free_network_queue(struct adapter *padapter, u8 isfreeall);

diff --git a/drivers/staging/r8188eu/include/rtw_mlme_ext.h b/drivers/staging/r8188eu/include/rtw_mlme_ext.h
index b322d0848db9..be470f913a94 100644
--- a/drivers/staging/r8188eu/include/rtw_mlme_ext.h
+++ b/drivers/staging/r8188eu/include/rtw_mlme_ext.h
@@ -479,11 +479,11 @@ void report_survey_event(struct adapter *padapter, struct recv_frame *precv_fram
 void report_surveydone_event(struct adapter *padapter);
 void report_del_sta_event(struct adapter *padapter,
 			  unsigned char *addr, unsigned short reason);
-void report_add_sta_event(struct adapter *padapter, unsigned char* addr,
+void report_add_sta_event(struct adapter *padapter, unsigned char *addr,
 			  int cam_idx);

 void beacon_timing_control(struct adapter *padapter);
-extern u8 set_tx_beacon_cmd(struct adapter*padapter);
+extern u8 set_tx_beacon_cmd(struct adapter *padapter);
 unsigned int setup_beacon_frame(struct adapter *padapter,
 				unsigned char *beacon_frame);
 void update_mgnt_tx_rate(struct adapter *padapter, u8 rate);
@@ -502,7 +502,7 @@ void issue_p2p_GO_request(struct adapter *padapter, u8 *raddr);
 void issue_probereq_p2p(struct adapter *padapter, u8 *da);
 void issue_p2p_invitation_response(struct adapter *padapter, u8 *raddr,
 				   u8 dialogToken, u8 success);
-void issue_p2p_invitation_request(struct adapter *padapter, u8* raddr);
+void issue_p2p_invitation_request(struct adapter *padapter, u8 *raddr);
 void issue_beacon(struct adapter *padapter, int timeout_ms);
 void issue_probersp(struct adapter *padapter, unsigned char *da,
 		    u8 is_valid_p2p_probereq);
@@ -514,7 +514,7 @@ void issue_auth(struct adapter *padapter, struct sta_info *psta,
 void issue_probereq(struct adapter *padapter, struct ndis_802_11_ssid *pssid,
 		    u8 *da);
 s32 issue_probereq_ex(struct adapter *adapter, struct ndis_802_11_ssid *pssid,
-		      u8* da, int try_cnt, int wait_ms);
+		      u8 *da, int try_cnt, int wait_ms);
 int issue_nulldata(struct adapter *padapter, unsigned char *da,
 		   unsigned int power_mode, int try_cnt, int wait_ms);
 int issue_qos_nulldata(struct adapter *padapter, unsigned char *da,
--
2.30.2

[PATCH v4 08/11] staging: r8188eu: replace leading spaces by tabs

[Deepak R Varma]

Spaces are prohibited as per the Linux coding style guidelines. Replace
those by tabs wherever possible to improve code alignment. Error
reported by checkpatch script.

Signed-off-by: Deepak R Varma <drv@mailo.com>
---

Changes in v4:
   -- None.

Changes in v3:
   1. Patch newly added in the patch set.

 drivers/staging/r8188eu/include/rtw_cmd.h      | 10 +++++-----
 drivers/staging/r8188eu/include/rtw_mlme.h     |  2 +-
 drivers/staging/r8188eu/include/rtw_mlme_ext.h |  2 +-
 3 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/staging/r8188eu/include/rtw_cmd.h b/drivers/staging/r8188eu/include/rtw_cmd.h
index 61fb523afb08..4b6a91aefc1e 100644
--- a/drivers/staging/r8188eu/include/rtw_cmd.h
+++ b/drivers/staging/r8188eu/include/rtw_cmd.h
@@ -592,14 +592,14 @@ struct setratable_parm {
 };

 struct getratable_parm {
-                uint rsvd;
+	uint rsvd;
 };

 struct getratable_rsp {
-        u8 ss_ForceUp[NumRates];
-        u8 ss_ULevel[NumRates];
-        u8 ss_DLevel[NumRates];
-        u8 count_judge[NumRates];
+	u8 ss_ForceUp[NumRates];
+	u8 ss_ULevel[NumRates];
+	u8 ss_DLevel[NumRates];
+	u8 count_judge[NumRates];
 };

 /* to get TX,RX retry count */
diff --git a/drivers/staging/r8188eu/include/rtw_mlme.h b/drivers/staging/r8188eu/include/rtw_mlme.h
index 7658f864136e..ebf7168a7ef9 100644
--- a/drivers/staging/r8188eu/include/rtw_mlme.h
+++ b/drivers/staging/r8188eu/include/rtw_mlme.h
@@ -528,7 +528,7 @@ void rtw_indicate_scan_done(struct adapter *padapter);
 int rtw_restruct_sec_ie(struct adapter *adapter, u8 *in_ie, u8 *out_ie,
 			uint in_len);
 int rtw_restruct_wmm_ie(struct adapter *adapter, u8 *in_ie, u8 *out_ie,
-		        uint in_len, uint initial_out_len);
+			uint in_len, uint initial_out_len);
 void rtw_init_registrypriv_dev_network(struct adapter *adapter);

 void rtw_update_registrypriv_dev_network(struct adapter *adapter);
diff --git a/drivers/staging/r8188eu/include/rtw_mlme_ext.h b/drivers/staging/r8188eu/include/rtw_mlme_ext.h
index be470f913a94..413b94e38744 100644
--- a/drivers/staging/r8188eu/include/rtw_mlme_ext.h
+++ b/drivers/staging/r8188eu/include/rtw_mlme_ext.h
@@ -449,7 +449,7 @@ void ERP_IE_handler(struct adapter *padapter, struct ndis_802_11_var_ie *pIE);
 void VCS_update(struct adapter *padapter, struct sta_info *psta);

 void update_beacon_info(struct adapter *padapter, u8 *pframe, uint len,
-		        struct sta_info *psta);
+			struct sta_info *psta);
 int rtw_check_bcn_info(struct adapter  *Adapter, u8 *pframe, u32 packet_len);
 void update_IOT_info(struct adapter *padapter);
 void update_capinfo(struct adapter *adapter, u16 updatecap);
--
2.30.2

Re: [PATCH v4 08/11] staging: r8188eu: replace leading spaces by tabs

[Praveen Kumar]

On 21-10-2022 03:01, Deepak R Varma wrote:
> Spaces are prohibited as per the Linux coding style guidelines. Replace
> those by tabs wherever possible to improve code alignment. Error
> reported by checkpatch script.
> 
> Signed-off-by: Deepak R Varma <drv@mailo.com>
> ---
> 
> Changes in v4:
>    -- None.
> 
> Changes in v3:
>    1. Patch newly added in the patch set.
> 
>  drivers/staging/r8188eu/include/rtw_cmd.h      | 10 +++++-----
>  drivers/staging/r8188eu/include/rtw_mlme.h     |  2 +-
>  drivers/staging/r8188eu/include/rtw_mlme_ext.h |  2 +-
>  3 files changed, 7 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/staging/r8188eu/include/rtw_cmd.h b/drivers/staging/r8188eu/include/rtw_cmd.h
> index 61fb523afb08..4b6a91aefc1e 100644
> --- a/drivers/staging/r8188eu/include/rtw_cmd.h
> +++ b/drivers/staging/r8188eu/include/rtw_cmd.h
> @@ -592,14 +592,14 @@ struct setratable_parm {
>  };
> 
>  struct getratable_parm {
> -                uint rsvd;
> +	uint rsvd;
>  };
> 
>  struct getratable_rsp {
> -        u8 ss_ForceUp[NumRates];
> -        u8 ss_ULevel[NumRates];
> -        u8 ss_DLevel[NumRates];
> -        u8 count_judge[NumRates];
> +	u8 ss_ForceUp[NumRates];
> +	u8 ss_ULevel[NumRates];
> +	u8 ss_DLevel[NumRates];

Can this be reworked further like ss_ForceUp -> ss_force_up or ss_forceup ?
Similarly for other attributes.

> +	u8 count_judge[NumRates];
>  };
> 
>  /* to get TX,RX retry count */
> diff --git a/drivers/staging/r8188eu/include/rtw_mlme.h b/drivers/staging/r8188eu/include/rtw_mlme.h
> index 7658f864136e..ebf7168a7ef9 100644
> --- a/drivers/staging/r8188eu/include/rtw_mlme.h
> +++ b/drivers/staging/r8188eu/include/rtw_mlme.h
> @@ -528,7 +528,7 @@ void rtw_indicate_scan_done(struct adapter *padapter);
>  int rtw_restruct_sec_ie(struct adapter *adapter, u8 *in_ie, u8 *out_ie,
>  			uint in_len);
>  int rtw_restruct_wmm_ie(struct adapter *adapter, u8 *in_ie, u8 *out_ie,
> -		        uint in_len, uint initial_out_len);
> +			uint in_len, uint initial_out_len);
>  void rtw_init_registrypriv_dev_network(struct adapter *adapter);
> 
>  void rtw_update_registrypriv_dev_network(struct adapter *adapter);
> diff --git a/drivers/staging/r8188eu/include/rtw_mlme_ext.h b/drivers/staging/r8188eu/include/rtw_mlme_ext.h
> index be470f913a94..413b94e38744 100644
> --- a/drivers/staging/r8188eu/include/rtw_mlme_ext.h
> +++ b/drivers/staging/r8188eu/include/rtw_mlme_ext.h
> @@ -449,7 +449,7 @@ void ERP_IE_handler(struct adapter *padapter, struct ndis_802_11_var_ie *pIE);
>  void VCS_update(struct adapter *padapter, struct sta_info *psta);
> 
>  void update_beacon_info(struct adapter *padapter, u8 *pframe, uint len,
> -		        struct sta_info *psta);
> +			struct sta_info *psta);
>  int rtw_check_bcn_info(struct adapter  *Adapter, u8 *pframe, u32 packet_len);
>  void update_IOT_info(struct adapter *padapter);
>  void update_capinfo(struct adapter *adapter, u16 updatecap);
> --
> 2.30.2
> 
> 
> 

Regards,

~Praveen.

Re: [PATCH v4 08/11] staging: r8188eu: replace leading spaces by tabs

[Deepak R Varma]

On Fri, Oct 21, 2022 at 11:04:49AM +0530, Praveen Kumar wrote:
> On 21-10-2022 03:01, Deepak R Varma wrote:
> > Spaces are prohibited as per the Linux coding style guidelines. Replace
> > those by tabs wherever possible to improve code alignment. Error
> > reported by checkpatch script.
> >
> > Signed-off-by: Deepak R Varma <drv@mailo.com>
> > ---
> >
> > Changes in v4:
> >    -- None.
> >
> > Changes in v3:
> >    1. Patch newly added in the patch set.
> >
> >  drivers/staging/r8188eu/include/rtw_cmd.h      | 10 +++++-----
> >  drivers/staging/r8188eu/include/rtw_mlme.h     |  2 +-
> >  drivers/staging/r8188eu/include/rtw_mlme_ext.h |  2 +-
> >  3 files changed, 7 insertions(+), 7 deletions(-)
> >
> > diff --git a/drivers/staging/r8188eu/include/rtw_cmd.h b/drivers/staging/r8188eu/include/rtw_cmd.h
> > index 61fb523afb08..4b6a91aefc1e 100644
> > --- a/drivers/staging/r8188eu/include/rtw_cmd.h
> > +++ b/drivers/staging/r8188eu/include/rtw_cmd.h
> > @@ -592,14 +592,14 @@ struct setratable_parm {
> >  };
> >
> >  struct getratable_parm {
> > -                uint rsvd;
> > +	uint rsvd;
> >  };
> >
> >  struct getratable_rsp {
> > -        u8 ss_ForceUp[NumRates];
> > -        u8 ss_ULevel[NumRates];
> > -        u8 ss_DLevel[NumRates];
> > -        u8 count_judge[NumRates];
> > +	u8 ss_ForceUp[NumRates];
> > +	u8 ss_ULevel[NumRates];
> > +	u8 ss_DLevel[NumRates];
>
> Can this be reworked further like ss_ForceUp -> ss_force_up or ss_forceup ?
> Similarly for other attributes.

Absolutely; however, it will have to be in a separate patch since that change
will be "Avoid CamelCase", different from the current scope of this patch.
I am making note of this work as a separate patch. I will send that in as a
standalone patch as I would like to keep the current patch set size manageable
by me.

Thank you Praveen.
./drv

>
> > +	u8 count_judge[NumRates];
> >  };
> >
> >  /* to get TX,RX retry count */
> > diff --git a/drivers/staging/r8188eu/include/rtw_mlme.h b/drivers/staging/r8188eu/include/rtw_mlme.h
> > index 7658f864136e..ebf7168a7ef9 100644
> > --- a/drivers/staging/r8188eu/include/rtw_mlme.h
> > +++ b/drivers/staging/r8188eu/include/rtw_mlme.h
> > @@ -528,7 +528,7 @@ void rtw_indicate_scan_done(struct adapter *padapter);
> >  int rtw_restruct_sec_ie(struct adapter *adapter, u8 *in_ie, u8 *out_ie,
> >  			uint in_len);
> >  int rtw_restruct_wmm_ie(struct adapter *adapter, u8 *in_ie, u8 *out_ie,
> > -		        uint in_len, uint initial_out_len);
> > +			uint in_len, uint initial_out_len);
> >  void rtw_init_registrypriv_dev_network(struct adapter *adapter);
> >
> >  void rtw_update_registrypriv_dev_network(struct adapter *adapter);
> > diff --git a/drivers/staging/r8188eu/include/rtw_mlme_ext.h b/drivers/staging/r8188eu/include/rtw_mlme_ext.h
> > index be470f913a94..413b94e38744 100644
> > --- a/drivers/staging/r8188eu/include/rtw_mlme_ext.h
> > +++ b/drivers/staging/r8188eu/include/rtw_mlme_ext.h
> > @@ -449,7 +449,7 @@ void ERP_IE_handler(struct adapter *padapter, struct ndis_802_11_var_ie *pIE);
> >  void VCS_update(struct adapter *padapter, struct sta_info *psta);
> >
> >  void update_beacon_info(struct adapter *padapter, u8 *pframe, uint len,
> > -		        struct sta_info *psta);
> > +			struct sta_info *psta);
> >  int rtw_check_bcn_info(struct adapter  *Adapter, u8 *pframe, u32 packet_len);
> >  void update_IOT_info(struct adapter *padapter);
> >  void update_capinfo(struct adapter *adapter, u16 updatecap);
> > --
> > 2.30.2
> >
> >
> >
>
> Regards,
>
> ~Praveen.
>

[PATCH v4 09/11] staging: r8188eu: Put '{" on the symbol declaration line

[Deepak R Varma]

Open braces '{" should be placed on the line of symbol declaration as
per the coding-style guidelines. Improves readability and matches with
style used in rest of the code. Issue reported by checkpatch script.

Signed-off-by: Deepak R Varma <drv@mailo.com>
---

Changes in v4:
   -- None.

Changes in v3:
   1. Patch newly added to the patch set.


 drivers/staging/r8188eu/include/rtw_cmd.h | 18 ++++++------------
 1 file changed, 6 insertions(+), 12 deletions(-)

diff --git a/drivers/staging/r8188eu/include/rtw_cmd.h b/drivers/staging/r8188eu/include/rtw_cmd.h
index 4b6a91aefc1e..0a138f6f5bbb 100644
--- a/drivers/staging/r8188eu/include/rtw_cmd.h
+++ b/drivers/staging/r8188eu/include/rtw_cmd.h
@@ -445,8 +445,7 @@ struct getrfintfs_parm {
 	u8	rfintfs;
 };

-struct Tx_Beacon_param
-{
+struct Tx_Beacon_param {
 	struct wlan_bssid_ex network;
 };

@@ -682,26 +681,22 @@ struct set_ch_parm {
 };

 /*H2C Handler index: 59 */
-struct SetChannelPlan_param
-{
+struct SetChannelPlan_param {
 	u8 channel_plan;
 };

 /*H2C Handler index: 60 */
-struct LedBlink_param
-{
+struct LedBlink_param {
 	struct LED_871x *pLed;
 };

 /*H2C Handler index: 61 */
-struct SetChannelSwitch_param
-{
+struct SetChannelSwitch_param {
 	u8 new_ch_no;
 };

 /*H2C Handler index: 62 */
-struct TDLSoption_param
-{
+struct TDLSoption_param {
 	u8 addr[ETH_ALEN];
 	u8 option;
 };
@@ -859,8 +854,7 @@ enum rtw_h2c_cmd {
 #define _SetRFReg_CMD_		_Write_RFREG_CMD_

 #ifdef _RTW_CMD_C_
-static struct _cmd_callback	rtw_cmd_callback[] =
-{
+static struct _cmd_callback	rtw_cmd_callback[] = {
 	{GEN_CMD_CODE(_Read_MACREG), NULL}, /*0*/
 	{GEN_CMD_CODE(_Write_MACREG), NULL},
 	{GEN_CMD_CODE(_Read_BBREG), &rtw_getbbrfreg_cmdrsp_callback},
--
2.30.2

[PATCH v4 10/11] staging: r8188eu: Correct missing or extra space in the statements

[Deepak R Varma]

Properly spacing out code statements/instructions improves code
readability. Add missing or remove extra space as necessary according
to the Linux Kernel coding-style guidelines. Following errors reported
by checkpatch script for inconsistent code spacing:
	ERROR: space prohibited before that close parenthesis ')'
	ERROR: space prohibited before that ',' (ctx:WxW)
	CHECK: spaces preferred around that '&' (ctx:VxV)

Signed-off-by: Deepak R Varma <drv@mailo.com>
---

Changes in v4:
   -- None.

Changes in v3:
   1. Patch newly added to the patch set.

 .../staging/r8188eu/include/rtl8188e_spec.h    | 12 ++++++------
 drivers/staging/r8188eu/include/rtw_mlme.h     | 18 +++++++++---------
 drivers/staging/r8188eu/include/rtw_mlme_ext.h |  2 +-
 3 files changed, 16 insertions(+), 16 deletions(-)

diff --git a/drivers/staging/r8188eu/include/rtl8188e_spec.h b/drivers/staging/r8188eu/include/rtl8188e_spec.h
index e34ecdc09688..3fa3b3e5dd64 100644
--- a/drivers/staging/r8188eu/include/rtl8188e_spec.h
+++ b/drivers/staging/r8188eu/include/rtl8188e_spec.h
@@ -900,12 +900,12 @@ Current IOREG MAP
 #define HQSEL_HIQ			BIT(5)

 /*  For normal driver, 0x10C */
-#define _TXDMA_HIQ_MAP(x)		(((x)&0x3) << 14)
-#define _TXDMA_MGQ_MAP(x)		(((x)&0x3) << 12)
-#define _TXDMA_BKQ_MAP(x)		(((x)&0x3) << 10)
-#define _TXDMA_BEQ_MAP(x)		(((x)&0x3) << 8 )
-#define _TXDMA_VIQ_MAP(x)		(((x)&0x3) << 6 )
-#define _TXDMA_VOQ_MAP(x)		(((x)&0x3) << 4 )
+#define _TXDMA_HIQ_MAP(x)		(((x) & 0x3) << 14)
+#define _TXDMA_MGQ_MAP(x)		(((x) & 0x3) << 12)
+#define _TXDMA_BKQ_MAP(x)		(((x) & 0x3) << 10)
+#define _TXDMA_BEQ_MAP(x)		(((x) & 0x3) << 8)
+#define _TXDMA_VIQ_MAP(x)		(((x) & 0x3) << 6)
+#define _TXDMA_VOQ_MAP(x)		(((x) & 0x3) << 4)

 #define QUEUE_LOW			1
 #define QUEUE_NORMAL			2
diff --git a/drivers/staging/r8188eu/include/rtw_mlme.h b/drivers/staging/r8188eu/include/rtw_mlme.h
index ebf7168a7ef9..ca539c652f26 100644
--- a/drivers/staging/r8188eu/include/rtw_mlme.h
+++ b/drivers/staging/r8188eu/include/rtw_mlme.h
@@ -101,17 +101,17 @@ struct rt_link_detect {

 struct profile_info {
 	u8	ssidlen;
-	u8	ssid[ WLAN_SSID_MAXLEN ];
-	u8	peermac[ ETH_ALEN ];
+	u8	ssid[WLAN_SSID_MAXLEN];
+	u8	peermac[ETH_ALEN];
 };

 struct tx_invite_req_info {
 	u8	token;
 	u8	benable;
-	u8	go_ssid[ WLAN_SSID_MAXLEN ];
+	u8	go_ssid[WLAN_SSID_MAXLEN];
 	u8	ssidlen;
-	u8	go_bssid[ ETH_ALEN ];
-	u8	peer_macaddr[ ETH_ALEN ];
+	u8	go_bssid[ETH_ALEN];
+	u8	peer_macaddr[ETH_ALEN];
 	u8	operating_ch;	/* This information will be set by using the
 				 * p2p_set op_ch=x */
 	u8	peer_ch;	/* The listen channel for peer P2P device */
@@ -154,9 +154,9 @@ struct tx_nego_req_info {
 };

 struct group_id_info {
-	u8	go_device_addr[ ETH_ALEN ];	/* The GO's device address of
+	u8	go_device_addr[ETH_ALEN];	/* The GO's device address of
 						 * this P2P group */
-	u8	ssid[ WLAN_SSID_MAXLEN ];	/* The SSID of this P2P group */
+	u8	ssid[WLAN_SSID_MAXLEN];	/* The SSID of this P2P group */
 };

 struct scan_limit_info {
@@ -459,7 +459,7 @@ static inline void set_fwstate(struct mlme_priv *pmlmepriv, int state)
 {
 	pmlmepriv->fw_state |= state;
 	/* FOR HW integration */
-	if (_FW_UNDER_SURVEY==state)
+	if (_FW_UNDER_SURVEY == state)
 		pmlmepriv->bScanInProcess = true;
 }

@@ -467,7 +467,7 @@ static inline void _clr_fwstate_(struct mlme_priv *pmlmepriv, int state)
 {
 	pmlmepriv->fw_state &= ~state;
 	/* FOR HW integration */
-	if (_FW_UNDER_SURVEY==state)
+	if (_FW_UNDER_SURVEY == state)
 		pmlmepriv->bScanInProcess = false;
 }

diff --git a/drivers/staging/r8188eu/include/rtw_mlme_ext.h b/drivers/staging/r8188eu/include/rtw_mlme_ext.h
index 413b94e38744..66aa8b497aa1 100644
--- a/drivers/staging/r8188eu/include/rtw_mlme_ext.h
+++ b/drivers/staging/r8188eu/include/rtw_mlme_ext.h
@@ -729,7 +729,7 @@ enum rtw_c2h_event {
 	GEN_EVT_CODE(_Survey),	 /*8*/
 	GEN_EVT_CODE(_SurveyDone),	 /*9*/

-	GEN_EVT_CODE(_JoinBss) , /*10*/
+	GEN_EVT_CODE(_JoinBss), /*10*/
 	GEN_EVT_CODE(_AddSTA),
 	GEN_EVT_CODE(_DelSTA),
 	GEN_EVT_CODE(_AtimDone),
--
2.30.2

[PATCH v4 11/11] staging: r8188eu: Remove unused macros

[Deepak R Varma]

Simple variants of macros PlatformEFIOWrite and PlatformEFIORead are
defined but never used. As they do not appear to be designed for anything
significant, we can remove them to avoid unexpected usage.

Suggested-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Deepak R Varma <drv@mailo.com>
---

Changes in v4:
   1. Patch newly added to the patch set.


 drivers/staging/r8188eu/include/rtw_io.h | 14 --------------
 1 file changed, 14 deletions(-)

diff --git a/drivers/staging/r8188eu/include/rtw_io.h b/drivers/staging/r8188eu/include/rtw_io.h
index 87fcf6c94ff3..e9744694204b 100644
--- a/drivers/staging/r8188eu/include/rtw_io.h
+++ b/drivers/staging/r8188eu/include/rtw_io.h
@@ -285,18 +285,4 @@ void bus_sync_io(struct io_queue *pio_q);
 u32 _ioreq2rwmem(struct io_queue *pio_q);
 void dev_power_down(struct adapter *Adapter, u8 bpwrup);

-#define PlatformEFIOWrite1Byte(_a, _b, _c)		\
-	rtw_write8(_a, _b, _c)
-#define PlatformEFIOWrite2Byte(_a, _b, _c)		\
-	rtw_write16(_a, _b, _c)
-#define PlatformEFIOWrite4Byte(_a, _b, _c)		\
-	rtw_write32(_a, _b, _c)
-
-#define PlatformEFIORead1Byte(_a, _b)		\
-		rtw_read8(_a, _b)
-#define PlatformEFIORead2Byte(_a, _b)		\
-		rtw_read16(_a, _b)
-#define PlatformEFIORead4Byte(_a, _b)		\
-		rtw_read32(_a, _b)
-
 #endif	/* _RTL8711_IO_H_ */
--
2.30.2

Re: [PATCH v4 11/11] staging: r8188eu: Remove unused macros

[Praveen Kumar]

On 21-10-2022 03:02, Deepak R Varma wrote:
> Simple variants of macros PlatformEFIOWrite and PlatformEFIORead are
> defined but never used. As they do not appear to be designed for anything
> significant, we can remove them to avoid unexpected usage.
> 
> Suggested-by: Julia Lawall <julia.lawall@inria.fr>
> Signed-off-by: Deepak R Varma <drv@mailo.com>
> ---
> 
> Changes in v4:
>    1. Patch newly added to the patch set.
> 
> 
>  drivers/staging/r8188eu/include/rtw_io.h | 14 --------------
>  1 file changed, 14 deletions(-)
> 
> diff --git a/drivers/staging/r8188eu/include/rtw_io.h b/drivers/staging/r8188eu/include/rtw_io.h
> index 87fcf6c94ff3..e9744694204b 100644
> --- a/drivers/staging/r8188eu/include/rtw_io.h
> +++ b/drivers/staging/r8188eu/include/rtw_io.h
> @@ -285,18 +285,4 @@ void bus_sync_io(struct io_queue *pio_q);
>  u32 _ioreq2rwmem(struct io_queue *pio_q);
>  void dev_power_down(struct adapter *Adapter, u8 bpwrup);
> 
> -#define PlatformEFIOWrite1Byte(_a, _b, _c)		\
> -	rtw_write8(_a, _b, _c)
> -#define PlatformEFIOWrite2Byte(_a, _b, _c)		\
> -	rtw_write16(_a, _b, _c)
> -#define PlatformEFIOWrite4Byte(_a, _b, _c)		\
> -	rtw_write32(_a, _b, _c)
> -
> -#define PlatformEFIORead1Byte(_a, _b)		\

Can the naming be reworked to make more Linux friendly ? something like PLATFORM_EFIO_READ1BYTE or better if there are other suggestions?
Rest others as applicable ?

> -		rtw_read8(_a, _b)
> -#define PlatformEFIORead2Byte(_a, _b)		\
> -		rtw_read16(_a, _b)
> -#define PlatformEFIORead4Byte(_a, _b)		\
> -		rtw_read32(_a, _b)
> -
>  #endif	/* _RTL8711_IO_H_ */
> --
> 2.30.2
> 
> 
> 
Regards,

~Praveen.

Re: [PATCH v4 11/11] staging: r8188eu: Remove unused macros

[Greg KH]

On Fri, Oct 21, 2022 at 11:21:06AM +0530, Praveen Kumar wrote:
> On 21-10-2022 03:02, Deepak R Varma wrote:
> > Simple variants of macros PlatformEFIOWrite and PlatformEFIORead are
> > defined but never used. As they do not appear to be designed for anything
> > significant, we can remove them to avoid unexpected usage.
> > 
> > Suggested-by: Julia Lawall <julia.lawall@inria.fr>
> > Signed-off-by: Deepak R Varma <drv@mailo.com>
> > ---
> > 
> > Changes in v4:
> >    1. Patch newly added to the patch set.
> > 
> > 
> >  drivers/staging/r8188eu/include/rtw_io.h | 14 --------------
> >  1 file changed, 14 deletions(-)
> > 
> > diff --git a/drivers/staging/r8188eu/include/rtw_io.h b/drivers/staging/r8188eu/include/rtw_io.h
> > index 87fcf6c94ff3..e9744694204b 100644
> > --- a/drivers/staging/r8188eu/include/rtw_io.h
> > +++ b/drivers/staging/r8188eu/include/rtw_io.h
> > @@ -285,18 +285,4 @@ void bus_sync_io(struct io_queue *pio_q);
> >  u32 _ioreq2rwmem(struct io_queue *pio_q);
> >  void dev_power_down(struct adapter *Adapter, u8 bpwrup);
> > 
> > -#define PlatformEFIOWrite1Byte(_a, _b, _c)		\
> > -	rtw_write8(_a, _b, _c)
> > -#define PlatformEFIOWrite2Byte(_a, _b, _c)		\
> > -	rtw_write16(_a, _b, _c)
> > -#define PlatformEFIOWrite4Byte(_a, _b, _c)		\
> > -	rtw_write32(_a, _b, _c)
> > -
> > -#define PlatformEFIORead1Byte(_a, _b)		\
> 
> Can the naming be reworked to make more Linux friendly ? something like PLATFORM_EFIO_READ1BYTE or better if there are other suggestions?
> Rest others as applicable ?

All of these should just be removed entirely and the normal calls here
made instead.  There is no need for these #defines at all.

thanks,

greg k-h

Re: [PATCH v4 11/11] staging: r8188eu: Remove unused macros

[Deepak R Varma]

On Fri, Oct 21, 2022 at 07:56:05AM +0200, Greg KH wrote:
> On Fri, Oct 21, 2022 at 11:21:06AM +0530, Praveen Kumar wrote:
> > On 21-10-2022 03:02, Deepak R Varma wrote:
> > > Simple variants of macros PlatformEFIOWrite and PlatformEFIORead are
> > > defined but never used. As they do not appear to be designed for anything
> > > significant, we can remove them to avoid unexpected usage.
> > >
> > > Suggested-by: Julia Lawall <julia.lawall@inria.fr>
> > > Signed-off-by: Deepak R Varma <drv@mailo.com>
> > > ---
> > >
> > > Changes in v4:
> > >    1. Patch newly added to the patch set.
> > >
> > >
> > >  drivers/staging/r8188eu/include/rtw_io.h | 14 --------------
> > >  1 file changed, 14 deletions(-)
> > >
> > > diff --git a/drivers/staging/r8188eu/include/rtw_io.h b/drivers/staging/r8188eu/include/rtw_io.h
> > > index 87fcf6c94ff3..e9744694204b 100644
> > > --- a/drivers/staging/r8188eu/include/rtw_io.h
> > > +++ b/drivers/staging/r8188eu/include/rtw_io.h
> > > @@ -285,18 +285,4 @@ void bus_sync_io(struct io_queue *pio_q);
> > >  u32 _ioreq2rwmem(struct io_queue *pio_q);
> > >  void dev_power_down(struct adapter *Adapter, u8 bpwrup);
> > >
> > > -#define PlatformEFIOWrite1Byte(_a, _b, _c)		\
> > > -	rtw_write8(_a, _b, _c)
> > > -#define PlatformEFIOWrite2Byte(_a, _b, _c)		\
> > > -	rtw_write16(_a, _b, _c)
> > > -#define PlatformEFIOWrite4Byte(_a, _b, _c)		\
> > > -	rtw_write32(_a, _b, _c)
> > > -
> > > -#define PlatformEFIORead1Byte(_a, _b)		\
> >
> > Can the naming be reworked to make more Linux friendly ? something like PLATFORM_EFIO_READ1BYTE or better if there are other suggestions?
> > Rest others as applicable ?
>
> All of these should just be removed entirely and the normal calls here
> made instead.  There is no need for these #defines at all.

Hello Greg,
The current patch scope results in removal of these #defines. Can you please
clarify what you mean by "normal calls here made instead"? Do you mean the
calling function should directly call the wrapped functions OR you are
suggesting converting these #defines to inline functions?

Thank you,
./drv

>
> thanks,
>
> greg k-h
>

Re: [PATCH v4 11/11] staging: r8188eu: Remove unused macros

[Greg KH]

On Fri, Oct 21, 2022 at 05:04:37AM +0530, Deepak R Varma wrote:
> On Fri, Oct 21, 2022 at 07:56:05AM +0200, Greg KH wrote:
> > On Fri, Oct 21, 2022 at 11:21:06AM +0530, Praveen Kumar wrote:
> > > On 21-10-2022 03:02, Deepak R Varma wrote:
> > > > Simple variants of macros PlatformEFIOWrite and PlatformEFIORead are
> > > > defined but never used. As they do not appear to be designed for anything
> > > > significant, we can remove them to avoid unexpected usage.
> > > >
> > > > Suggested-by: Julia Lawall <julia.lawall@inria.fr>
> > > > Signed-off-by: Deepak R Varma <drv@mailo.com>
> > > > ---
> > > >
> > > > Changes in v4:
> > > >    1. Patch newly added to the patch set.
> > > >
> > > >
> > > >  drivers/staging/r8188eu/include/rtw_io.h | 14 --------------
> > > >  1 file changed, 14 deletions(-)
> > > >
> > > > diff --git a/drivers/staging/r8188eu/include/rtw_io.h b/drivers/staging/r8188eu/include/rtw_io.h
> > > > index 87fcf6c94ff3..e9744694204b 100644
> > > > --- a/drivers/staging/r8188eu/include/rtw_io.h
> > > > +++ b/drivers/staging/r8188eu/include/rtw_io.h
> > > > @@ -285,18 +285,4 @@ void bus_sync_io(struct io_queue *pio_q);
> > > >  u32 _ioreq2rwmem(struct io_queue *pio_q);
> > > >  void dev_power_down(struct adapter *Adapter, u8 bpwrup);
> > > >
> > > > -#define PlatformEFIOWrite1Byte(_a, _b, _c)		\
> > > > -	rtw_write8(_a, _b, _c)
> > > > -#define PlatformEFIOWrite2Byte(_a, _b, _c)		\
> > > > -	rtw_write16(_a, _b, _c)
> > > > -#define PlatformEFIOWrite4Byte(_a, _b, _c)		\
> > > > -	rtw_write32(_a, _b, _c)
> > > > -
> > > > -#define PlatformEFIORead1Byte(_a, _b)		\
> > >
> > > Can the naming be reworked to make more Linux friendly ? something like PLATFORM_EFIO_READ1BYTE or better if there are other suggestions?
> > > Rest others as applicable ?
> >
> > All of these should just be removed entirely and the normal calls here
> > made instead.  There is no need for these #defines at all.
> 
> Hello Greg,
> The current patch scope results in removal of these #defines. Can you please
> clarify what you mean by "normal calls here made instead"? Do you mean the
> calling function should directly call the wrapped functions OR you are
> suggesting converting these #defines to inline functions?

The calling function should call the wrapped function instead, there is
no need for another pointless level of indirection here.

thanks,

greg k-h

Re: [PATCH v4 11/11] staging: r8188eu: Remove unused macros

[Deepak R Varma]

On Fri, Oct 21, 2022 at 10:33:57AM +0200, Greg KH wrote:
> On Fri, Oct 21, 2022 at 05:04:37AM +0530, Deepak R Varma wrote:
> > On Fri, Oct 21, 2022 at 07:56:05AM +0200, Greg KH wrote:
> > > On Fri, Oct 21, 2022 at 11:21:06AM +0530, Praveen Kumar wrote:
> > > > On 21-10-2022 03:02, Deepak R Varma wrote:
> > > > > Simple variants of macros PlatformEFIOWrite and PlatformEFIORead are
> > > > > defined but never used. As they do not appear to be designed for anything
> > > > > significant, we can remove them to avoid unexpected usage.
> > > > >
> > > > > Suggested-by: Julia Lawall <julia.lawall@inria.fr>
> > > > > Signed-off-by: Deepak R Varma <drv@mailo.com>
> > > > > ---
> > > > >
> > > > > Changes in v4:
> > > > >    1. Patch newly added to the patch set.
> > > > >
> > > > >
> > > > >  drivers/staging/r8188eu/include/rtw_io.h | 14 --------------
> > > > >  1 file changed, 14 deletions(-)
> > > > >
> > > > > diff --git a/drivers/staging/r8188eu/include/rtw_io.h b/drivers/staging/r8188eu/include/rtw_io.h
> > > > > index 87fcf6c94ff3..e9744694204b 100644
> > > > > --- a/drivers/staging/r8188eu/include/rtw_io.h
> > > > > +++ b/drivers/staging/r8188eu/include/rtw_io.h
> > > > > @@ -285,18 +285,4 @@ void bus_sync_io(struct io_queue *pio_q);
> > > > >  u32 _ioreq2rwmem(struct io_queue *pio_q);
> > > > >  void dev_power_down(struct adapter *Adapter, u8 bpwrup);
> > > > >
> > > > > -#define PlatformEFIOWrite1Byte(_a, _b, _c)		\
> > > > > -	rtw_write8(_a, _b, _c)
> > > > > -#define PlatformEFIOWrite2Byte(_a, _b, _c)		\
> > > > > -	rtw_write16(_a, _b, _c)
> > > > > -#define PlatformEFIOWrite4Byte(_a, _b, _c)		\
> > > > > -	rtw_write32(_a, _b, _c)
> > > > > -
> > > > > -#define PlatformEFIORead1Byte(_a, _b)		\
> > > >
> > > > Can the naming be reworked to make more Linux friendly ? something like PLATFORM_EFIO_READ1BYTE or better if there are other suggestions?
> > > > Rest others as applicable ?
> > >
> > > All of these should just be removed entirely and the normal calls here
> > > made instead.  There is no need for these #defines at all.
> >
> > Hello Greg,
> > The current patch scope results in removal of these #defines. Can you please
> > clarify what you mean by "normal calls here made instead"? Do you mean the
> > calling function should directly call the wrapped functions OR you are
> > suggesting converting these #defines to inline functions?
>
> The calling function should call the wrapped function instead, there is
> no need for another pointless level of indirection here.

Sounds good. Thank you for the clarification.

./drv

>
> thanks,
>
> greg k-h

Re: [PATCH v4 00/11] staging: r8188eu: trivial code cleanup patches

[Philipp Hortmann]

On 10/20/22 23:26, Deepak R Varma wrote:
> Address different kinds of checkpatch complains for the staging/r8188eu module.
> The patches are required to be applied in sequence.
> 
> Changes in v4:
>     1. Include patch 11 in the set for unused macro clean up. Suggested by julia.lawall@inria.fr
>     2. Update patch 1 per feedback from David.Laight@ACULAB.COM
>     3. Update patch 5 & 6 per feedback from dan.carpenter@oracle.com & julia.lawall@inria.fr
> 
> Changes in v3:
>     1. Patch 4: Extend the __constant_htons to htons change to other files of the driver.
>        This was suggested by philipp.g.hortmann@gmail.com
>     2. Patch 4: Spelling mistake corrected as pointed out by joe@perches.com
>     3. Patch 5 through 10: Included in this version. Additional clean up patches.
> 
> Changes in v2:
>     I incorrectly labeled the first revision as v1 instead of v2. So,
>     following change recorded under v1 is actually changes for v2. Feedback
>     provided by philipp.g.hortmann@gmail.com
>        1. Improve language / grammar for the patch descriptions
>        2. Further improve code reformatting
> 
> 
> Deepak R Varma (11):
>    staging: r8188eu: use Linux kernel variable naming convention
>    staging: r8188eu: reformat long computation lines
>    staging: r8188eu: remove {} for single statement blocks
>    staging: r8188eu: use htons macro instead of __constant_htons
>    staging: r8188eu: correct misspelled words in comments
>    staging: r8188eu: Add space between function & macro parameters
>    staging: r8188eu: Associate pointer symbol with parameter name
>    staging: r8188eu: replace leading spaces by tabs
>    staging: r8188eu: Put '{" on the symbol declaration line
>    staging: r8188eu: Correct missing or extra space in the statements
>    staging: r8188eu: Remove unused macros
> 
>   drivers/staging/r8188eu/core/rtw_br_ext.c     | 119 +++++++++---------
>   drivers/staging/r8188eu/core/rtw_ioctl_set.c  |   2 +-
>   drivers/staging/r8188eu/core/rtw_mlme_ext.c   |  36 +++---
>   drivers/staging/r8188eu/core/rtw_recv.c       |   8 +-
>   drivers/staging/r8188eu/core/rtw_xmit.c       |  14 +--
>   drivers/staging/r8188eu/hal/HalPhyRf_8188e.c  |   2 +-
>   drivers/staging/r8188eu/hal/odm_RTL8188E.c    |   2 +-
>   .../staging/r8188eu/hal/rtl8188e_hal_init.c   |   2 +-
>   drivers/staging/r8188eu/hal/rtl8188e_phycfg.c |  16 +--
>   .../staging/r8188eu/include/Hal8188EPhyReg.h  |   4 +-
>   .../staging/r8188eu/include/osdep_service.h   |   4 +-
>   .../staging/r8188eu/include/rtl8188e_hal.h    |   6 +-
>   .../staging/r8188eu/include/rtl8188e_spec.h   |  18 +--
>   drivers/staging/r8188eu/include/rtw_cmd.h     |  62 +++++----
>   drivers/staging/r8188eu/include/rtw_io.h      |  16 +--
>   .../staging/r8188eu/include/rtw_ioctl_set.h   |   4 +-
>   drivers/staging/r8188eu/include/rtw_mlme.h    |  22 ++--
>   .../staging/r8188eu/include/rtw_mlme_ext.h    |  12 +-
>   drivers/staging/r8188eu/include/rtw_recv.h    |   4 +-
>   drivers/staging/r8188eu/include/rtw_xmit.h    |   2 +-
>   drivers/staging/r8188eu/include/wifi.h        |  12 +-
>   drivers/staging/r8188eu/os_dep/ioctl_linux.c  |   6 +-
>   22 files changed, 176 insertions(+), 197 deletions(-)
> 
> --
> 2.30.2
> 
> 
> 
> 

Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150

Re: [PATCH v4 00/11] staging: r8188eu: trivial code cleanup patches

[Greg KH]

On Fri, Oct 21, 2022 at 02:56:10AM +0530, Deepak R Varma wrote:
> Address different kinds of checkpatch complains for the staging/r8188eu module.
> The patches are required to be applied in sequence.
> 
> Changes in v4:
>    1. Include patch 11 in the set for unused macro clean up. Suggested by julia.lawall@inria.fr
>    2. Update patch 1 per feedback from David.Laight@ACULAB.COM
>    3. Update patch 5 & 6 per feedback from dan.carpenter@oracle.com & julia.lawall@inria.fr
> 
> Changes in v3:
>    1. Patch 4: Extend the __constant_htons to htons change to other files of the driver.
>       This was suggested by philipp.g.hortmann@gmail.com
>    2. Patch 4: Spelling mistake corrected as pointed out by joe@perches.com
>    3. Patch 5 through 10: Included in this version. Additional clean up patches.
> 
> Changes in v2:
>    I incorrectly labeled the first revision as v1 instead of v2. So,
>    following change recorded under v1 is actually changes for v2. Feedback
>    provided by philipp.g.hortmann@gmail.com
>       1. Improve language / grammar for the patch descriptions
>       2. Further improve code reformatting
> 

I've taken these, but note, your email system is not properly being
authenticated.  Here's the results I get when I use the tool 'b4' to
apply the patches:

Grabbing thread from lore.kernel.org/all/cover.1666299151.git.drv%40mailo.com/t.mbox.gz
Analyzing 20 messages in the thread
Checking attestation on all messages, may take a moment...
---
  ✗ [PATCH v4 1/11] staging: r8188eu: use Linux kernel variable naming convention
    + Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> (✓ DKIM/gmail.com)
  ✗ [PATCH v4 2/11] staging: r8188eu: reformat long computation lines
    + Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> (✓ DKIM/gmail.com)
  ✗ [PATCH v4 3/11] staging: r8188eu: remove {} for single statement blocks
    + Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> (✓ DKIM/gmail.com)
  ✗ [PATCH v4 4/11] staging: r8188eu: use htons macro instead of __constant_htons
    + Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> (✓ DKIM/gmail.com)
  ✗ [PATCH v4 5/11] staging: r8188eu: correct misspelled words in comments
    + Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> (✓ DKIM/gmail.com)
  ✗ [PATCH v4 6/11] staging: r8188eu: Add space between function & macro parameters
    + Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> (✓ DKIM/gmail.com)
  ✗ [PATCH v4 7/11] staging: r8188eu: Associate pointer symbol with parameter name
    + Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> (✓ DKIM/gmail.com)
  ✗ [PATCH v4 8/11] staging: r8188eu: replace leading spaces by tabs
    + Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> (✓ DKIM/gmail.com)
  ✗ [PATCH v4 9/11] staging: r8188eu: Put '{" on the symbol declaration line
    + Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> (✓ DKIM/gmail.com)
  ✗ [PATCH v4 10/11] staging: r8188eu: Correct missing or extra space in the statements
    + Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> (✓ DKIM/gmail.com)
  ✗ [PATCH v4 11/11] staging: r8188eu: Remove unused macros
    + Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> (✓ DKIM/gmail.com)
  ---
  ✗ BADSIG: DKIM/mailo.com
---
Total patches: 11


Please look into fixing up your DKIM settings.

thanks,

greg k-h

Re: [PATCH v4 00/11] staging: r8188eu: trivial code cleanup patches

[Deepak R Varma]

On Sat, Oct 22, 2022 at 10:05:36AM +0200, Greg KH wrote:
> On Fri, Oct 21, 2022 at 02:56:10AM +0530, Deepak R Varma wrote:
> > Address different kinds of checkpatch complains for the staging/r8188eu module.
> > The patches are required to be applied in sequence.
> >
> > Changes in v4:
> >    1. Include patch 11 in the set for unused macro clean up. Suggested by julia.lawall@inria.fr
> >    2. Update patch 1 per feedback from David.Laight@ACULAB.COM
> >    3. Update patch 5 & 6 per feedback from dan.carpenter@oracle.com & julia.lawall@inria.fr
> >
> > Changes in v3:
> >    1. Patch 4: Extend the __constant_htons to htons change to other files of the driver.
> >       This was suggested by philipp.g.hortmann@gmail.com
> >    2. Patch 4: Spelling mistake corrected as pointed out by joe@perches.com
> >    3. Patch 5 through 10: Included in this version. Additional clean up patches.
> >
> > Changes in v2:
> >    I incorrectly labeled the first revision as v1 instead of v2. So,
> >    following change recorded under v1 is actually changes for v2. Feedback
> >    provided by philipp.g.hortmann@gmail.com
> >       1. Improve language / grammar for the patch descriptions
> >       2. Further improve code reformatting
> >
>
> I've taken these, but note, your email system is not properly being
> authenticated.  Here's the results I get when I use the tool 'b4' to
> apply the patches:
>
> Grabbing thread from lore.kernel.org/all/cover.1666299151.git.drv%40mailo.com/t.mbox.gz
> Analyzing 20 messages in the thread
> Checking attestation on all messages, may take a moment...
> ---
>   ✗ [PATCH v4 1/11] staging: r8188eu: use Linux kernel variable naming convention
>     + Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> (✓ DKIM/gmail.com)
>   ✗ [PATCH v4 2/11] staging: r8188eu: reformat long computation lines
>     + Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> (✓ DKIM/gmail.com)
>   ✗ [PATCH v4 3/11] staging: r8188eu: remove {} for single statement blocks
>     + Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> (✓ DKIM/gmail.com)
>   ✗ [PATCH v4 4/11] staging: r8188eu: use htons macro instead of __constant_htons
>     + Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> (✓ DKIM/gmail.com)
>   ✗ [PATCH v4 5/11] staging: r8188eu: correct misspelled words in comments
>     + Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> (✓ DKIM/gmail.com)
>   ✗ [PATCH v4 6/11] staging: r8188eu: Add space between function & macro parameters
>     + Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> (✓ DKIM/gmail.com)
>   ✗ [PATCH v4 7/11] staging: r8188eu: Associate pointer symbol with parameter name
>     + Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> (✓ DKIM/gmail.com)
>   ✗ [PATCH v4 8/11] staging: r8188eu: replace leading spaces by tabs
>     + Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> (✓ DKIM/gmail.com)
>   ✗ [PATCH v4 9/11] staging: r8188eu: Put '{" on the symbol declaration line
>     + Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> (✓ DKIM/gmail.com)
>   ✗ [PATCH v4 10/11] staging: r8188eu: Correct missing or extra space in the statements
>     + Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> (✓ DKIM/gmail.com)
>   ✗ [PATCH v4 11/11] staging: r8188eu: Remove unused macros
>     + Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> (✓ DKIM/gmail.com)
>   ---
>   ✗ BADSIG: DKIM/mailo.com
> ---
> Total patches: 11
>
>
> Please look into fixing up your DKIM settings.

Hi Greg,
Yeah, there is some trouble with my email settings and I have already written to
the tech support.
I will also look DKIM authentication issue and let you know if I need further
guidance from you all.

Thank you for highlight it.


./drv

>
> thanks,
>
> greg k-h