* [PATCH 00/11] dts: Update coresight device tree bindings
@ 2018-09-11 10:17 ` Suzuki K Poulose
0 siblings, 0 replies; 51+ messages in thread
From: Suzuki K Poulose @ 2018-09-11 10:17 UTC (permalink / raw)
To: linux-arm-kernel
Coresight DT bindings have been updated to obey the DTS rules
for label/address matching for graph nodes. The changes are in
coresight/next tree scheduled for v4.20. This series updates the
in kernel dts to match the new bindings along with updating a couple
of new examples (e.,g CATU) in the Documentation (which were missed
as they were still in flight when we created the series).
Please note that this should not be pulled for v4.19, which I assume
is a safe assumption. But please do pull it for v4.20.
The dt updates for the Juno boards were sent earlier with the original
DT update series and has been queued for v4.20.
Applies on coresight/next (which is based on v4.19) and should apply
cleanly on v4.19-rc3.
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Andy Gross <andy.gross@linaro.org>
Cc: Beno?t Cousson <bcousson@baylibre.com>
Cc: David Brown <david.brown@linaro.org>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Ivan T. Ivanov <ivan.ivanov@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-omap at vger.kernel.org
Cc: lipengcheng8 at huawei.com
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: orsonzhai at gmail.com
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Rob Herring <robh@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: xuwei5 at hisilicon.com
Cc: zhang.lyra at gmail.com
Cc: arm at kernel.org
Suzuki K Poulose (11):
Documentation: dts: Update coresight binding examples
dts: hisilicon: Update coresight bindings for hardware ports
dts: spreadtrum: Update coresight bindings for hardware ports
dts: qcom: Update coresight bindings for hardware ports
dts: arm: hisilicon: Update coresight bindings for hardware ports
dts: arm: imx7{d,s}: Update coresight binding for hardware ports
dts: arm: omap: Update coresight bindings for hardware ports
dts: arm: qcom: Update coresight bindings for hardware ports
dts: sama5d2: Update coresight bindings for hardware ports
dts: ste-dbx5x0: Update coresight bindings for hardware port
dts: tc2: Update coresight bindings for hardware ports
.../devicetree/bindings/arm/coresight.txt | 20 +-
arch/arm/boot/dts/hip04.dtsi | 322 ++++++++++++---------
arch/arm/boot/dts/imx7d.dtsi | 11 +-
arch/arm/boot/dts/imx7s.dtsi | 78 +++--
arch/arm/boot/dts/omap3-beagle-xm.dts | 17 +-
arch/arm/boot/dts/omap3-beagle.dts | 17 +-
arch/arm/boot/dts/qcom-apq8064.dtsi | 75 +++--
arch/arm/boot/dts/qcom-msm8974.dtsi | 108 ++++---
arch/arm/boot/dts/sama5d2.dtsi | 17 +-
arch/arm/boot/dts/ste-dbx5x0.dtsi | 61 ++--
arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts | 90 +++---
.../arm64/boot/dts/hisilicon/hi6220-coresight.dtsi | 147 ++++++----
arch/arm64/boot/dts/qcom/msm8916.dtsi | 98 ++++---
arch/arm64/boot/dts/sprd/sc9836.dtsi | 74 +++--
arch/arm64/boot/dts/sprd/sc9860.dtsi | 183 +++++++-----
15 files changed, 780 insertions(+), 538 deletions(-)
--
2.7.4
^ permalink raw reply [flat|nested] 51+ messages in thread* [PATCH 00/11] dts: Update coresight device tree bindings
@ 2018-09-11 10:17 ` Suzuki K Poulose
0 siblings, 0 replies; 51+ messages in thread
From: Suzuki K Poulose @ 2018-09-11 10:17 UTC (permalink / raw)
To: linux-arm-kernel
Cc: linux-kernel, robh, frowand.list, devicetree, mathieu.poirier,
arm, sudeep.holla, Alexandre Belloni, Andy Gross,
Benoît Cousson, David Brown, Fabio Estevam, Ivan T . Ivanov,
Linus Walleij, linux-omap, lipengcheng8, Liviu Dudau,
Lorenzo Pieralisi, Nicolas Ferre, orsonzhai,
Pengutronix Kernel Team, Sascha Hauer
Coresight DT bindings have been updated to obey the DTS rules
for label/address matching for graph nodes. The changes are in
coresight/next tree scheduled for v4.20. This series updates the
in kernel dts to match the new bindings along with updating a couple
of new examples (e.,g CATU) in the Documentation (which were missed
as they were still in flight when we created the series).
Please note that this should not be pulled for v4.19, which I assume
is a safe assumption. But please do pull it for v4.20.
The dt updates for the Juno boards were sent earlier with the original
DT update series and has been queued for v4.20.
Applies on coresight/next (which is based on v4.19) and should apply
cleanly on v4.19-rc3.
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Andy Gross <andy.gross@linaro.org>
Cc: Benoît Cousson <bcousson@baylibre.com>
Cc: David Brown <david.brown@linaro.org>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Ivan T. Ivanov <ivan.ivanov@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-omap@vger.kernel.org
Cc: lipengcheng8@huawei.com
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: orsonzhai@gmail.com
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Rob Herring <robh@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: xuwei5@hisilicon.com
Cc: zhang.lyra@gmail.com
Cc: arm@kernel.org
Suzuki K Poulose (11):
Documentation: dts: Update coresight binding examples
dts: hisilicon: Update coresight bindings for hardware ports
dts: spreadtrum: Update coresight bindings for hardware ports
dts: qcom: Update coresight bindings for hardware ports
dts: arm: hisilicon: Update coresight bindings for hardware ports
dts: arm: imx7{d,s}: Update coresight binding for hardware ports
dts: arm: omap: Update coresight bindings for hardware ports
dts: arm: qcom: Update coresight bindings for hardware ports
dts: sama5d2: Update coresight bindings for hardware ports
dts: ste-dbx5x0: Update coresight bindings for hardware port
dts: tc2: Update coresight bindings for hardware ports
.../devicetree/bindings/arm/coresight.txt | 20 +-
arch/arm/boot/dts/hip04.dtsi | 322 ++++++++++++---------
arch/arm/boot/dts/imx7d.dtsi | 11 +-
arch/arm/boot/dts/imx7s.dtsi | 78 +++--
arch/arm/boot/dts/omap3-beagle-xm.dts | 17 +-
arch/arm/boot/dts/omap3-beagle.dts | 17 +-
arch/arm/boot/dts/qcom-apq8064.dtsi | 75 +++--
arch/arm/boot/dts/qcom-msm8974.dtsi | 108 ++++---
arch/arm/boot/dts/sama5d2.dtsi | 17 +-
arch/arm/boot/dts/ste-dbx5x0.dtsi | 61 ++--
arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts | 90 +++---
.../arm64/boot/dts/hisilicon/hi6220-coresight.dtsi | 147 ++++++----
arch/arm64/boot/dts/qcom/msm8916.dtsi | 98 ++++---
arch/arm64/boot/dts/sprd/sc9836.dtsi | 74 +++--
arch/arm64/boot/dts/sprd/sc9860.dtsi | 183 +++++++-----
15 files changed, 780 insertions(+), 538 deletions(-)
--
2.7.4
^ permalink raw reply [flat|nested] 51+ messages in thread* [PATCH 01/11] Documentation: dts: Update coresight binding examples
2018-09-11 10:17 ` Suzuki K Poulose
(?)
@ 2018-09-11 10:17 ` Suzuki K Poulose
-1 siblings, 0 replies; 51+ messages in thread
From: Suzuki K Poulose @ 2018-09-11 10:17 UTC (permalink / raw)
To: linux-arm-kernel
Cc: linux-kernel, robh, frowand.list, devicetree, mathieu.poirier,
arm, sudeep.holla, Suzuki K Poulose
While we updated the coresight DT bindings, some of the
new examples were not updated due to the order in which they
were merged. Let us update all the missed out ones to the
new bindings to avoid confusion.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
---
Documentation/devicetree/bindings/arm/coresight.txt | 20 +++++++++++++-------
1 file changed, 13 insertions(+), 7 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/coresight.txt b/Documentation/devicetree/bindings/arm/coresight.txt
index f39d2c6..3b689e0 100644
--- a/Documentation/devicetree/bindings/arm/coresight.txt
+++ b/Documentation/devicetree/bindings/arm/coresight.txt
@@ -147,7 +147,7 @@ Example:
clocks = <&oscclk6a>;
clock-names = "apb_pclk";
- ports {
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -159,10 +159,15 @@ Example:
remote-endpoint = <&replicator2_out_port0>;
};
};
+ };
+
+ out-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
/* CATU link represented by output port */
- port@1 {
- reg = <1>;
+ port@0 {
+ reg = <0>;
etr_out_port: endpoint {
remote-endpoint = <&catu_in_port>;
};
@@ -310,10 +315,11 @@ Example:
clock-names = "apb_pclk";
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
- port {
- catu_in_port: endpoint {
- slave-mode;
- remote-endpoint = <&etr_out_port>;
+ in-ports {
+ port {
+ catu_in_port: endpoint {
+ remote-endpoint = <&etr_out_port>;
+ };
};
};
};
--
2.7.4
^ permalink raw reply related [flat|nested] 51+ messages in thread* [PATCH 01/11] Documentation: dts: Update coresight binding examples
@ 2018-09-11 10:17 ` Suzuki K Poulose
0 siblings, 0 replies; 51+ messages in thread
From: Suzuki K Poulose @ 2018-09-11 10:17 UTC (permalink / raw)
To: linux-arm-kernel
While we updated the coresight DT bindings, some of the
new examples were not updated due to the order in which they
were merged. Let us update all the missed out ones to the
new bindings to avoid confusion.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
---
Documentation/devicetree/bindings/arm/coresight.txt | 20 +++++++++++++-------
1 file changed, 13 insertions(+), 7 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/coresight.txt b/Documentation/devicetree/bindings/arm/coresight.txt
index f39d2c6..3b689e0 100644
--- a/Documentation/devicetree/bindings/arm/coresight.txt
+++ b/Documentation/devicetree/bindings/arm/coresight.txt
@@ -147,7 +147,7 @@ Example:
clocks = <&oscclk6a>;
clock-names = "apb_pclk";
- ports {
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -159,10 +159,15 @@ Example:
remote-endpoint = <&replicator2_out_port0>;
};
};
+ };
+
+ out-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
/* CATU link represented by output port */
- port at 1 {
- reg = <1>;
+ port at 0 {
+ reg = <0>;
etr_out_port: endpoint {
remote-endpoint = <&catu_in_port>;
};
@@ -310,10 +315,11 @@ Example:
clock-names = "apb_pclk";
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
- port {
- catu_in_port: endpoint {
- slave-mode;
- remote-endpoint = <&etr_out_port>;
+ in-ports {
+ port {
+ catu_in_port: endpoint {
+ remote-endpoint = <&etr_out_port>;
+ };
};
};
};
--
2.7.4
^ permalink raw reply related [flat|nested] 51+ messages in thread* [PATCH 01/11] Documentation: dts: Update coresight binding examples
@ 2018-09-11 10:17 ` Suzuki K Poulose
0 siblings, 0 replies; 51+ messages in thread
From: Suzuki K Poulose @ 2018-09-11 10:17 UTC (permalink / raw)
To: linux-arm-kernel
Cc: robh, mathieu.poirier, devicetree, Suzuki K Poulose,
linux-kernel, arm, sudeep.holla, frowand.list
While we updated the coresight DT bindings, some of the
new examples were not updated due to the order in which they
were merged. Let us update all the missed out ones to the
new bindings to avoid confusion.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
---
Documentation/devicetree/bindings/arm/coresight.txt | 20 +++++++++++++-------
1 file changed, 13 insertions(+), 7 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/coresight.txt b/Documentation/devicetree/bindings/arm/coresight.txt
index f39d2c6..3b689e0 100644
--- a/Documentation/devicetree/bindings/arm/coresight.txt
+++ b/Documentation/devicetree/bindings/arm/coresight.txt
@@ -147,7 +147,7 @@ Example:
clocks = <&oscclk6a>;
clock-names = "apb_pclk";
- ports {
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -159,10 +159,15 @@ Example:
remote-endpoint = <&replicator2_out_port0>;
};
};
+ };
+
+ out-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
/* CATU link represented by output port */
- port@1 {
- reg = <1>;
+ port@0 {
+ reg = <0>;
etr_out_port: endpoint {
remote-endpoint = <&catu_in_port>;
};
@@ -310,10 +315,11 @@ Example:
clock-names = "apb_pclk";
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
- port {
- catu_in_port: endpoint {
- slave-mode;
- remote-endpoint = <&etr_out_port>;
+ in-ports {
+ port {
+ catu_in_port: endpoint {
+ remote-endpoint = <&etr_out_port>;
+ };
};
};
};
--
2.7.4
^ permalink raw reply related [flat|nested] 51+ messages in thread* Re: [PATCH 01/11] Documentation: dts: Update coresight binding examples
2018-09-11 10:17 ` Suzuki K Poulose
@ 2018-09-17 5:45 ` Rob Herring
-1 siblings, 0 replies; 51+ messages in thread
From: Rob Herring @ 2018-09-17 5:45 UTC (permalink / raw)
Cc: robh, mathieu.poirier, devicetree, Suzuki K Poulose,
linux-kernel, arm, sudeep.holla, frowand.list, linux-arm-kernel
On Tue, 11 Sep 2018 11:17:02 +0100, Suzuki K Poulose wrote:
> While we updated the coresight DT bindings, some of the
> new examples were not updated due to the order in which they
> were merged. Let us update all the missed out ones to the
> new bindings to avoid confusion.
>
> Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
> Cc: Rob Herring <robh@kernel.org>
> Cc: Frank Rowand <frowand.list@gmail.com>
> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
> ---
> Documentation/devicetree/bindings/arm/coresight.txt | 20 +++++++++++++-------
> 1 file changed, 13 insertions(+), 7 deletions(-)
>
Reviewed-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 51+ messages in thread
* [PATCH 01/11] Documentation: dts: Update coresight binding examples
@ 2018-09-17 5:45 ` Rob Herring
0 siblings, 0 replies; 51+ messages in thread
From: Rob Herring @ 2018-09-17 5:45 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, 11 Sep 2018 11:17:02 +0100, Suzuki K Poulose wrote:
> While we updated the coresight DT bindings, some of the
> new examples were not updated due to the order in which they
> were merged. Let us update all the missed out ones to the
> new bindings to avoid confusion.
>
> Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
> Cc: Rob Herring <robh@kernel.org>
> Cc: Frank Rowand <frowand.list@gmail.com>
> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
> ---
> Documentation/devicetree/bindings/arm/coresight.txt | 20 +++++++++++++-------
> 1 file changed, 13 insertions(+), 7 deletions(-)
>
Reviewed-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 51+ messages in thread
* [PATCH 02/11] dts: hisilicon: Update coresight bindings for hardware ports
2018-09-11 10:17 ` Suzuki K Poulose
@ 2018-09-11 10:17 ` Suzuki K Poulose
-1 siblings, 0 replies; 51+ messages in thread
From: Suzuki K Poulose @ 2018-09-11 10:17 UTC (permalink / raw)
To: linux-arm-kernel
Cc: linux-kernel, robh, frowand.list, devicetree, mathieu.poirier,
arm, sudeep.holla, Suzuki K Poulose, xuwei5, lipengcheng8
Switch to updated coresight bindings for hw ports.
Cc: xuwei5@hisilicon.com
Cc: lipengcheng8@huawei.com
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
---
.../arm64/boot/dts/hisilicon/hi6220-coresight.dtsi | 147 ++++++++++++---------
1 file changed, 85 insertions(+), 62 deletions(-)
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi
index 7afee5d..2202816 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi
@@ -20,7 +20,7 @@
clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
clock-names = "apb_pclk";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -31,11 +31,15 @@
<&etf_in>;
};
};
+ };
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
soc_funnel_in: endpoint {
- slave-mode;
remote-endpoint =
<&acpu_funnel_out>;
};
@@ -49,20 +53,24 @@
clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
clock-names = "apb_pclk";
- ports {
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
etf_in: endpoint {
- slave-mode;
remote-endpoint =
<&soc_funnel_out>;
};
};
+ };
- port@1 {
+ out-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
etf_out: endpoint {
remote-endpoint =
@@ -77,20 +85,24 @@
clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
clock-names = "apb_pclk";
- ports {
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
replicator_in: endpoint {
- slave-mode;
remote-endpoint =
<&etf_out>;
};
};
+ };
- port@1 {
+ out-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
replicator_out0: endpoint {
remote-endpoint =
@@ -98,7 +110,7 @@
};
};
- port@2 {
+ port@1 {
reg = <1>;
replicator_out1: endpoint {
remote-endpoint =
@@ -114,14 +126,13 @@
clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
clock-names = "apb_pclk";
- ports {
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
etr_in: endpoint {
- slave-mode;
remote-endpoint =
<&replicator_out0>;
};
@@ -135,14 +146,13 @@
clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
clock-names = "apb_pclk";
- ports {
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
tpiu_in: endpoint {
- slave-mode;
remote-endpoint =
<&replicator_out1>;
};
@@ -156,7 +166,7 @@
clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
clock-names = "apb_pclk";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -167,74 +177,71 @@
<&soc_funnel_in>;
};
};
+ };
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
acpu_funnel_in0: endpoint {
- slave-mode;
remote-endpoint =
<&etm0_out>;
};
};
- port@2 {
+ port@1 {
reg = <1>;
acpu_funnel_in1: endpoint {
- slave-mode;
remote-endpoint =
<&etm1_out>;
};
};
- port@3 {
+ port@2 {
reg = <2>;
acpu_funnel_in2: endpoint {
- slave-mode;
remote-endpoint =
<&etm2_out>;
};
};
- port@4 {
+ port@3 {
reg = <3>;
acpu_funnel_in3: endpoint {
- slave-mode;
remote-endpoint =
<&etm3_out>;
};
};
- port@5 {
+ port@4 {
reg = <4>;
acpu_funnel_in4: endpoint {
- slave-mode;
remote-endpoint =
<&etm4_out>;
};
};
- port@6 {
+ port@5 {
reg = <5>;
acpu_funnel_in5: endpoint {
- slave-mode;
remote-endpoint =
<&etm5_out>;
};
};
- port@7 {
+ port@6 {
reg = <6>;
acpu_funnel_in6: endpoint {
- slave-mode;
remote-endpoint =
<&etm6_out>;
};
};
- port@8 {
+ port@7 {
reg = <7>;
acpu_funnel_in7: endpoint {
- slave-mode;
remote-endpoint =
<&etm7_out>;
};
@@ -251,10 +258,12 @@
cpu = <&cpu0>;
- port {
- etm0_out: endpoint {
- remote-endpoint =
- <&acpu_funnel_in0>;
+ out-ports {
+ port {
+ etm0_out: endpoint {
+ remote-endpoint =
+ <&acpu_funnel_in0>;
+ };
};
};
};
@@ -268,10 +277,12 @@
cpu = <&cpu1>;
- port {
- etm1_out: endpoint {
- remote-endpoint =
- <&acpu_funnel_in1>;
+ out-ports {
+ port {
+ etm1_out: endpoint {
+ remote-endpoint =
+ <&acpu_funnel_in1>;
+ };
};
};
};
@@ -285,10 +296,12 @@
cpu = <&cpu2>;
- port {
- etm2_out: endpoint {
- remote-endpoint =
- <&acpu_funnel_in2>;
+ out-ports {
+ port {
+ etm2_out: endpoint {
+ remote-endpoint =
+ <&acpu_funnel_in2>;
+ };
};
};
};
@@ -302,10 +315,12 @@
cpu = <&cpu3>;
- port {
- etm3_out: endpoint {
- remote-endpoint =
- <&acpu_funnel_in3>;
+ out-ports {
+ port {
+ etm3_out: endpoint {
+ remote-endpoint =
+ <&acpu_funnel_in3>;
+ };
};
};
};
@@ -319,10 +334,12 @@
cpu = <&cpu4>;
- port {
+ out-ports {
+ port {
etm4_out: endpoint {
- remote-endpoint =
- <&acpu_funnel_in4>;
+ remote-endpoint =
+ <&acpu_funnel_in4>;
+ };
};
};
};
@@ -336,10 +353,12 @@
cpu = <&cpu5>;
- port {
- etm5_out: endpoint {
- remote-endpoint =
- <&acpu_funnel_in5>;
+ out-ports {
+ port {
+ etm5_out: endpoint {
+ remote-endpoint =
+ <&acpu_funnel_in5>;
+ };
};
};
};
@@ -353,10 +372,12 @@
cpu = <&cpu6>;
- port {
- etm6_out: endpoint {
- remote-endpoint =
- <&acpu_funnel_in6>;
+ out-ports {
+ port {
+ etm6_out: endpoint {
+ remote-endpoint =
+ <&acpu_funnel_in6>;
+ };
};
};
};
@@ -370,10 +391,12 @@
cpu = <&cpu7>;
- port {
- etm7_out: endpoint {
- remote-endpoint =
- <&acpu_funnel_in7>;
+ out-ports {
+ port {
+ etm7_out: endpoint {
+ remote-endpoint =
+ <&acpu_funnel_in7>;
+ };
};
};
};
--
2.7.4
^ permalink raw reply related [flat|nested] 51+ messages in thread* [PATCH 02/11] dts: hisilicon: Update coresight bindings for hardware ports
@ 2018-09-11 10:17 ` Suzuki K Poulose
0 siblings, 0 replies; 51+ messages in thread
From: Suzuki K Poulose @ 2018-09-11 10:17 UTC (permalink / raw)
To: linux-arm-kernel
Switch to updated coresight bindings for hw ports.
Cc: xuwei5 at hisilicon.com
Cc: lipengcheng8 at huawei.com
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
---
.../arm64/boot/dts/hisilicon/hi6220-coresight.dtsi | 147 ++++++++++++---------
1 file changed, 85 insertions(+), 62 deletions(-)
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi
index 7afee5d..2202816 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi
@@ -20,7 +20,7 @@
clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
clock-names = "apb_pclk";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -31,11 +31,15 @@
<&etf_in>;
};
};
+ };
- port at 1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
reg = <0>;
soc_funnel_in: endpoint {
- slave-mode;
remote-endpoint =
<&acpu_funnel_out>;
};
@@ -49,20 +53,24 @@
clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
clock-names = "apb_pclk";
- ports {
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
port at 0 {
reg = <0>;
etf_in: endpoint {
- slave-mode;
remote-endpoint =
<&soc_funnel_out>;
};
};
+ };
- port at 1 {
+ out-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
reg = <0>;
etf_out: endpoint {
remote-endpoint =
@@ -77,20 +85,24 @@
clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
clock-names = "apb_pclk";
- ports {
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
port at 0 {
reg = <0>;
replicator_in: endpoint {
- slave-mode;
remote-endpoint =
<&etf_out>;
};
};
+ };
- port at 1 {
+ out-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
reg = <0>;
replicator_out0: endpoint {
remote-endpoint =
@@ -98,7 +110,7 @@
};
};
- port at 2 {
+ port at 1 {
reg = <1>;
replicator_out1: endpoint {
remote-endpoint =
@@ -114,14 +126,13 @@
clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
clock-names = "apb_pclk";
- ports {
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
port at 0 {
reg = <0>;
etr_in: endpoint {
- slave-mode;
remote-endpoint =
<&replicator_out0>;
};
@@ -135,14 +146,13 @@
clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
clock-names = "apb_pclk";
- ports {
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
port at 0 {
reg = <0>;
tpiu_in: endpoint {
- slave-mode;
remote-endpoint =
<&replicator_out1>;
};
@@ -156,7 +166,7 @@
clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
clock-names = "apb_pclk";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -167,74 +177,71 @@
<&soc_funnel_in>;
};
};
+ };
- port at 1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
reg = <0>;
acpu_funnel_in0: endpoint {
- slave-mode;
remote-endpoint =
<&etm0_out>;
};
};
- port at 2 {
+ port at 1 {
reg = <1>;
acpu_funnel_in1: endpoint {
- slave-mode;
remote-endpoint =
<&etm1_out>;
};
};
- port at 3 {
+ port at 2 {
reg = <2>;
acpu_funnel_in2: endpoint {
- slave-mode;
remote-endpoint =
<&etm2_out>;
};
};
- port at 4 {
+ port at 3 {
reg = <3>;
acpu_funnel_in3: endpoint {
- slave-mode;
remote-endpoint =
<&etm3_out>;
};
};
- port at 5 {
+ port at 4 {
reg = <4>;
acpu_funnel_in4: endpoint {
- slave-mode;
remote-endpoint =
<&etm4_out>;
};
};
- port at 6 {
+ port at 5 {
reg = <5>;
acpu_funnel_in5: endpoint {
- slave-mode;
remote-endpoint =
<&etm5_out>;
};
};
- port at 7 {
+ port at 6 {
reg = <6>;
acpu_funnel_in6: endpoint {
- slave-mode;
remote-endpoint =
<&etm6_out>;
};
};
- port at 8 {
+ port at 7 {
reg = <7>;
acpu_funnel_in7: endpoint {
- slave-mode;
remote-endpoint =
<&etm7_out>;
};
@@ -251,10 +258,12 @@
cpu = <&cpu0>;
- port {
- etm0_out: endpoint {
- remote-endpoint =
- <&acpu_funnel_in0>;
+ out-ports {
+ port {
+ etm0_out: endpoint {
+ remote-endpoint =
+ <&acpu_funnel_in0>;
+ };
};
};
};
@@ -268,10 +277,12 @@
cpu = <&cpu1>;
- port {
- etm1_out: endpoint {
- remote-endpoint =
- <&acpu_funnel_in1>;
+ out-ports {
+ port {
+ etm1_out: endpoint {
+ remote-endpoint =
+ <&acpu_funnel_in1>;
+ };
};
};
};
@@ -285,10 +296,12 @@
cpu = <&cpu2>;
- port {
- etm2_out: endpoint {
- remote-endpoint =
- <&acpu_funnel_in2>;
+ out-ports {
+ port {
+ etm2_out: endpoint {
+ remote-endpoint =
+ <&acpu_funnel_in2>;
+ };
};
};
};
@@ -302,10 +315,12 @@
cpu = <&cpu3>;
- port {
- etm3_out: endpoint {
- remote-endpoint =
- <&acpu_funnel_in3>;
+ out-ports {
+ port {
+ etm3_out: endpoint {
+ remote-endpoint =
+ <&acpu_funnel_in3>;
+ };
};
};
};
@@ -319,10 +334,12 @@
cpu = <&cpu4>;
- port {
+ out-ports {
+ port {
etm4_out: endpoint {
- remote-endpoint =
- <&acpu_funnel_in4>;
+ remote-endpoint =
+ <&acpu_funnel_in4>;
+ };
};
};
};
@@ -336,10 +353,12 @@
cpu = <&cpu5>;
- port {
- etm5_out: endpoint {
- remote-endpoint =
- <&acpu_funnel_in5>;
+ out-ports {
+ port {
+ etm5_out: endpoint {
+ remote-endpoint =
+ <&acpu_funnel_in5>;
+ };
};
};
};
@@ -353,10 +372,12 @@
cpu = <&cpu6>;
- port {
- etm6_out: endpoint {
- remote-endpoint =
- <&acpu_funnel_in6>;
+ out-ports {
+ port {
+ etm6_out: endpoint {
+ remote-endpoint =
+ <&acpu_funnel_in6>;
+ };
};
};
};
@@ -370,10 +391,12 @@
cpu = <&cpu7>;
- port {
- etm7_out: endpoint {
- remote-endpoint =
- <&acpu_funnel_in7>;
+ out-ports {
+ port {
+ etm7_out: endpoint {
+ remote-endpoint =
+ <&acpu_funnel_in7>;
+ };
};
};
};
--
2.7.4
^ permalink raw reply related [flat|nested] 51+ messages in thread* Re: [PATCH 02/11] dts: hisilicon: Update coresight bindings for hardware ports
2018-09-11 10:17 ` Suzuki K Poulose
@ 2018-09-12 10:47 ` leo.yan at linaro.org
-1 siblings, 0 replies; 51+ messages in thread
From: leo.yan @ 2018-09-12 10:47 UTC (permalink / raw)
To: Suzuki K Poulose
Cc: linux-arm-kernel, linux-kernel, robh, frowand.list, devicetree,
mathieu.poirier, arm, sudeep.holla, xuwei5, lipengcheng8
On Tue, Sep 11, 2018 at 11:17:03AM +0100, Suzuki K Poulose wrote:
> Switch to updated coresight bindings for hw ports.
As Shawn suggested, please change subject as "arm64: dts: hi6220:
...."
> Cc: xuwei5@hisilicon.com
> Cc: lipengcheng8@huawei.com
> Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
> ---
> .../arm64/boot/dts/hisilicon/hi6220-coresight.dtsi | 147 ++++++++++++---------
> 1 file changed, 85 insertions(+), 62 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi
> index 7afee5d..2202816 100644
> --- a/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi
> +++ b/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi
[...]
> @@ -302,10 +315,12 @@
>
> cpu = <&cpu3>;
>
> - port {
> - etm3_out: endpoint {
> - remote-endpoint =
> - <&acpu_funnel_in3>;
> + out-ports {
> + port {
> + etm3_out: endpoint {
> + remote-endpoint =
> + <&acpu_funnel_in3>;
> + };
> };
> };
> };
> @@ -319,10 +334,12 @@
>
> cpu = <&cpu4>;
>
> - port {
> + out-ports {
> + port {
> etm4_out: endpoint {
Indent?
After applied this patch and tested on Hikey board; FWIW:
Tested-by: Leo Yan <leo.yan@linaro.org>
> - remote-endpoint =
> - <&acpu_funnel_in4>;
> + remote-endpoint =
> + <&acpu_funnel_in4>;
> + };
> };
> };
> };
> @@ -336,10 +353,12 @@
>
> cpu = <&cpu5>;
>
> - port {
> - etm5_out: endpoint {
> - remote-endpoint =
> - <&acpu_funnel_in5>;
> + out-ports {
> + port {
> + etm5_out: endpoint {
> + remote-endpoint =
> + <&acpu_funnel_in5>;
> + };
> };
> };
> };
> @@ -353,10 +372,12 @@
>
> cpu = <&cpu6>;
>
> - port {
> - etm6_out: endpoint {
> - remote-endpoint =
> - <&acpu_funnel_in6>;
> + out-ports {
> + port {
> + etm6_out: endpoint {
> + remote-endpoint =
> + <&acpu_funnel_in6>;
> + };
> };
> };
> };
> @@ -370,10 +391,12 @@
>
> cpu = <&cpu7>;
>
> - port {
> - etm7_out: endpoint {
> - remote-endpoint =
> - <&acpu_funnel_in7>;
> + out-ports {
> + port {
> + etm7_out: endpoint {
> + remote-endpoint =
> + <&acpu_funnel_in7>;
> + };
> };
> };
> };
> --
> 2.7.4
>
^ permalink raw reply [flat|nested] 51+ messages in thread* [PATCH 02/11] dts: hisilicon: Update coresight bindings for hardware ports
@ 2018-09-12 10:47 ` leo.yan at linaro.org
0 siblings, 0 replies; 51+ messages in thread
From: leo.yan at linaro.org @ 2018-09-12 10:47 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Sep 11, 2018 at 11:17:03AM +0100, Suzuki K Poulose wrote:
> Switch to updated coresight bindings for hw ports.
As Shawn suggested, please change subject as "arm64: dts: hi6220:
...."
> Cc: xuwei5 at hisilicon.com
> Cc: lipengcheng8 at huawei.com
> Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
> ---
> .../arm64/boot/dts/hisilicon/hi6220-coresight.dtsi | 147 ++++++++++++---------
> 1 file changed, 85 insertions(+), 62 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi
> index 7afee5d..2202816 100644
> --- a/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi
> +++ b/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi
[...]
> @@ -302,10 +315,12 @@
>
> cpu = <&cpu3>;
>
> - port {
> - etm3_out: endpoint {
> - remote-endpoint =
> - <&acpu_funnel_in3>;
> + out-ports {
> + port {
> + etm3_out: endpoint {
> + remote-endpoint =
> + <&acpu_funnel_in3>;
> + };
> };
> };
> };
> @@ -319,10 +334,12 @@
>
> cpu = <&cpu4>;
>
> - port {
> + out-ports {
> + port {
> etm4_out: endpoint {
Indent?
After applied this patch and tested on Hikey board; FWIW:
Tested-by: Leo Yan <leo.yan@linaro.org>
> - remote-endpoint =
> - <&acpu_funnel_in4>;
> + remote-endpoint =
> + <&acpu_funnel_in4>;
> + };
> };
> };
> };
> @@ -336,10 +353,12 @@
>
> cpu = <&cpu5>;
>
> - port {
> - etm5_out: endpoint {
> - remote-endpoint =
> - <&acpu_funnel_in5>;
> + out-ports {
> + port {
> + etm5_out: endpoint {
> + remote-endpoint =
> + <&acpu_funnel_in5>;
> + };
> };
> };
> };
> @@ -353,10 +372,12 @@
>
> cpu = <&cpu6>;
>
> - port {
> - etm6_out: endpoint {
> - remote-endpoint =
> - <&acpu_funnel_in6>;
> + out-ports {
> + port {
> + etm6_out: endpoint {
> + remote-endpoint =
> + <&acpu_funnel_in6>;
> + };
> };
> };
> };
> @@ -370,10 +391,12 @@
>
> cpu = <&cpu7>;
>
> - port {
> - etm7_out: endpoint {
> - remote-endpoint =
> - <&acpu_funnel_in7>;
> + out-ports {
> + port {
> + etm7_out: endpoint {
> + remote-endpoint =
> + <&acpu_funnel_in7>;
> + };
> };
> };
> };
> --
> 2.7.4
>
^ permalink raw reply [flat|nested] 51+ messages in thread* Re: [PATCH 02/11] dts: hisilicon: Update coresight bindings for hardware ports
2018-09-12 10:47 ` leo.yan at linaro.org
@ 2018-09-12 12:42 ` Suzuki K Poulose
-1 siblings, 0 replies; 51+ messages in thread
From: Suzuki K Poulose @ 2018-09-12 12:42 UTC (permalink / raw)
To: leo.yan
Cc: linux-arm-kernel, linux-kernel, robh, frowand.list, devicetree,
mathieu.poirier, arm, sudeep.holla, xuwei5, lipengcheng8
Hi Leo,
On 12/09/18 11:47, leo.yan@linaro.org wrote:
> On Tue, Sep 11, 2018 at 11:17:03AM +0100, Suzuki K Poulose wrote:
>> Switch to updated coresight bindings for hw ports.
>
> As Shawn suggested, please change subject as "arm64: dts: hi6220:
> ...."
>
Sure, will do.
>> Cc: xuwei5@hisilicon.com
>> Cc: lipengcheng8@huawei.com
>> Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
>> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
>> ---
>> .../arm64/boot/dts/hisilicon/hi6220-coresight.dtsi | 147 ++++++++++++---------
>> 1 file changed, 85 insertions(+), 62 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi
>> index 7afee5d..2202816 100644
>> --- a/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi
>> +++ b/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi
>
> [...]
>
>> @@ -302,10 +315,12 @@
>>
>> cpu = <&cpu3>;
>>
>> - port {
>> - etm3_out: endpoint {
>> - remote-endpoint =
>> - <&acpu_funnel_in3>;
>> + out-ports {
>> + port {
>> + etm3_out: endpoint {
>> + remote-endpoint =
>> + <&acpu_funnel_in3>;
>> + };
>> };
>> };
>> };
>> @@ -319,10 +334,12 @@
>>
>> cpu = <&cpu4>;
>>
>> - port {
>> + out-ports {
>> + port {
>> etm4_out: endpoint {
>
> Indent?
Yes, I have fixed this locally for v2.
>
> After applied this patch and tested on Hikey board; FWIW:
>
> Tested-by: Leo Yan <leo.yan@linaro.org>
Thanks for the testing !
Cheers
Suzuki
^ permalink raw reply [flat|nested] 51+ messages in thread* [PATCH 02/11] dts: hisilicon: Update coresight bindings for hardware ports
@ 2018-09-12 12:42 ` Suzuki K Poulose
0 siblings, 0 replies; 51+ messages in thread
From: Suzuki K Poulose @ 2018-09-12 12:42 UTC (permalink / raw)
To: linux-arm-kernel
Hi Leo,
On 12/09/18 11:47, leo.yan at linaro.org wrote:
> On Tue, Sep 11, 2018 at 11:17:03AM +0100, Suzuki K Poulose wrote:
>> Switch to updated coresight bindings for hw ports.
>
> As Shawn suggested, please change subject as "arm64: dts: hi6220:
> ...."
>
Sure, will do.
>> Cc: xuwei5 at hisilicon.com
>> Cc: lipengcheng8 at huawei.com
>> Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
>> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
>> ---
>> .../arm64/boot/dts/hisilicon/hi6220-coresight.dtsi | 147 ++++++++++++---------
>> 1 file changed, 85 insertions(+), 62 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi
>> index 7afee5d..2202816 100644
>> --- a/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi
>> +++ b/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi
>
> [...]
>
>> @@ -302,10 +315,12 @@
>>
>> cpu = <&cpu3>;
>>
>> - port {
>> - etm3_out: endpoint {
>> - remote-endpoint =
>> - <&acpu_funnel_in3>;
>> + out-ports {
>> + port {
>> + etm3_out: endpoint {
>> + remote-endpoint =
>> + <&acpu_funnel_in3>;
>> + };
>> };
>> };
>> };
>> @@ -319,10 +334,12 @@
>>
>> cpu = <&cpu4>;
>>
>> - port {
>> + out-ports {
>> + port {
>> etm4_out: endpoint {
>
> Indent?
Yes, I have fixed this locally for v2.
>
> After applied this patch and tested on Hikey board; FWIW:
>
> Tested-by: Leo Yan <leo.yan@linaro.org>
Thanks for the testing !
Cheers
Suzuki
^ permalink raw reply [flat|nested] 51+ messages in thread
* [PATCH 03/11] dts: spreadtrum: Update coresight bindings for hardware ports
2018-09-11 10:17 ` Suzuki K Poulose
@ 2018-09-11 10:17 ` Suzuki K Poulose
-1 siblings, 0 replies; 51+ messages in thread
From: Suzuki K Poulose @ 2018-09-11 10:17 UTC (permalink / raw)
To: linux-arm-kernel
Cc: linux-kernel, robh, frowand.list, devicetree, mathieu.poirier,
arm, sudeep.holla, Suzuki K Poulose, orsonzhai, zhang.lyra
Switch to the new coresight bindings for hw ports
Cc: orsonzhai@gmail.com
Cc: zhang.lyra@gmail.com
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
---
arch/arm64/boot/dts/sprd/sc9836.dtsi | 74 ++++++++------
arch/arm64/boot/dts/sprd/sc9860.dtsi | 183 +++++++++++++++++++++--------------
2 files changed, 151 insertions(+), 106 deletions(-)
diff --git a/arch/arm64/boot/dts/sprd/sc9836.dtsi b/arch/arm64/boot/dts/sprd/sc9836.dtsi
index 63894c4..416f271 100644
--- a/arch/arm64/boot/dts/sprd/sc9836.dtsi
+++ b/arch/arm64/boot/dts/sprd/sc9836.dtsi
@@ -50,10 +50,11 @@
reg = <0 0x10003000 0 0x1000>;
clocks = <&clk26mhz>;
clock-names = "apb_pclk";
- port {
- etf_in: endpoint {
- slave-mode;
- remote-endpoint = <&funnel_out_port0>;
+ in-ports {
+ port {
+ etf_in: endpoint {
+ remote-endpoint = <&funnel_out_port0>;
+ };
};
};
};
@@ -63,55 +64,54 @@
reg = <0 0x10001000 0 0x1000>;
clocks = <&clk26mhz>;
clock-names = "apb_pclk";
- ports {
+
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
- /* funnel output port */
port@0 {
reg = <0>;
funnel_out_port0: endpoint {
remote-endpoint = <&etf_in>;
};
};
+ };
- /* funnel input port 0-4 */
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
funnel_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&etm0_out>;
};
};
- port@2 {
+ port@1 {
reg = <1>;
funnel_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&etm1_out>;
};
};
- port@3 {
+ port@2 {
reg = <2>;
funnel_in_port2: endpoint {
- slave-mode;
remote-endpoint = <&etm2_out>;
};
};
- port@4 {
+ port@3 {
reg = <3>;
funnel_in_port3: endpoint {
- slave-mode;
remote-endpoint = <&etm3_out>;
};
};
- port@5 {
+ port@4 {
reg = <4>;
funnel_in_port4: endpoint {
- slave-mode;
remote-endpoint = <&stm_out>;
};
};
@@ -126,9 +126,11 @@
cpu = <&cpu0>;
clocks = <&clk26mhz>;
clock-names = "apb_pclk";
- port {
- etm0_out: endpoint {
- remote-endpoint = <&funnel_in_port0>;
+ out-ports {
+ port {
+ etm0_out: endpoint {
+ remote-endpoint = <&funnel_in_port0>;
+ };
};
};
};
@@ -140,9 +142,11 @@
cpu = <&cpu1>;
clocks = <&clk26mhz>;
clock-names = "apb_pclk";
- port {
- etm1_out: endpoint {
- remote-endpoint = <&funnel_in_port1>;
+ out-ports {
+ port {
+ etm1_out: endpoint {
+ remote-endpoint = <&funnel_in_port1>;
+ };
};
};
};
@@ -154,9 +158,11 @@
cpu = <&cpu2>;
clocks = <&clk26mhz>;
clock-names = "apb_pclk";
- port {
- etm2_out: endpoint {
- remote-endpoint = <&funnel_in_port2>;
+ out-ports {
+ port {
+ etm2_out: endpoint {
+ remote-endpoint = <&funnel_in_port2>;
+ };
};
};
};
@@ -168,9 +174,11 @@
cpu = <&cpu3>;
clocks = <&clk26mhz>;
clock-names = "apb_pclk";
- port {
- etm3_out: endpoint {
- remote-endpoint = <&funnel_in_port3>;
+ out-ports {
+ port {
+ etm3_out: endpoint {
+ remote-endpoint = <&funnel_in_port3>;
+ };
};
};
};
@@ -182,9 +190,11 @@
reg-names = "stm-base", "stm-stimulus-base";
clocks = <&clk26mhz>;
clock-names = "apb_pclk";
- port {
- stm_out: endpoint {
- remote-endpoint = <&funnel_in_port4>;
+ out-ports {
+ port {
+ stm_out: endpoint {
+ remote-endpoint = <&funnel_in_port4>;
+ };
};
};
};
diff --git a/arch/arm64/boot/dts/sprd/sc9860.dtsi b/arch/arm64/boot/dts/sprd/sc9860.dtsi
index 48f5928..50aef73 100644
--- a/arch/arm64/boot/dts/sprd/sc9860.dtsi
+++ b/arch/arm64/boot/dts/sprd/sc9860.dtsi
@@ -304,7 +304,7 @@
reg = <0 0x10001000 0 0x1000>;
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -314,20 +314,23 @@
remote-endpoint = <&etb_in>;
};
};
+ };
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
soc_funnel_in_port0: endpoint {
- slave-mode;
remote-endpoint =
<&main_funnel_out_port>;
};
};
- port@2 {
+ port@4 {
reg = <4>;
soc_funnel_in_port1: endpoint {
- slave-mode;
remote-endpoint =
<&stm_out_port>;
};
@@ -340,11 +343,12 @@
reg = <0 0x10003000 0 0x1000>;
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- port {
- etb_in: endpoint {
- slave-mode;
- remote-endpoint =
- <&soc_funnel_out_port>;
+ out-ports {
+ port {
+ etb_in: endpoint {
+ remote-endpoint =
+ <&soc_funnel_out_port>;
+ };
};
};
};
@@ -356,10 +360,12 @@
reg-names = "stm-base", "stm-stimulus-base";
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- port {
- stm_out_port: endpoint {
- remote-endpoint =
- <&soc_funnel_in_port1>;
+ out-ports {
+ port {
+ stm_out_port: endpoint {
+ remote-endpoint =
+ <&soc_funnel_in_port1>;
+ };
};
};
};
@@ -369,7 +375,7 @@
reg = <0 0x11001000 0 0x1000>;
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -380,27 +386,29 @@
<&cluster0_etf_in>;
};
};
+ };
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
cluster0_funnel_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&etm0_out>;
};
};
- port@2 {
+ port@1 {
reg = <1>;
cluster0_funnel_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&etm1_out>;
};
};
- port@3 {
+ port@2 {
reg = <2>;
cluster0_funnel_in_port2: endpoint {
- slave-mode;
remote-endpoint = <&etm2_out>;
};
};
@@ -408,7 +416,6 @@
port@4 {
reg = <4>;
cluster0_funnel_in_port3: endpoint {
- slave-mode;
remote-endpoint = <&etm3_out>;
};
};
@@ -420,7 +427,7 @@
reg = <0 0x11002000 0 0x1000>;
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -431,35 +438,36 @@
<&cluster1_etf_in>;
};
};
+ };
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
cluster1_funnel_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&etm4_out>;
};
};
- port@2 {
+ port@1 {
reg = <1>;
cluster1_funnel_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&etm5_out>;
};
};
- port@3 {
+ port@2 {
reg = <2>;
cluster1_funnel_in_port2: endpoint {
- slave-mode;
remote-endpoint = <&etm6_out>;
};
};
- port@4 {
+ port@3 {
reg = <3>;
cluster1_funnel_in_port3: endpoint {
- slave-mode;
remote-endpoint = <&etm7_out>;
};
};
@@ -472,7 +480,7 @@
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -483,11 +491,15 @@
<&main_funnel_in_port0>;
};
};
+ };
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
cluster0_etf_in: endpoint {
- slave-mode;
remote-endpoint =
<&cluster0_funnel_out_port>;
};
@@ -501,7 +513,7 @@
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -512,11 +524,15 @@
<&main_funnel_in_port1>;
};
};
+ };
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
cluster1_etf_in: endpoint {
- slave-mode;
remote-endpoint =
<&cluster1_funnel_out_port>;
};
@@ -530,7 +546,7 @@
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -541,20 +557,23 @@
<&soc_funnel_in_port0>;
};
};
+ };
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
main_funnel_in_port0: endpoint {
- slave-mode;
remote-endpoint =
<&cluster0_etf_out>;
};
};
- port@2 {
+ port@1 {
reg = <1>;
main_funnel_in_port1: endpoint {
- slave-mode;
remote-endpoint =
<&cluster1_etf_out>;
};
@@ -569,10 +588,12 @@
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- port {
- etm0_out: endpoint {
- remote-endpoint =
- <&cluster0_funnel_in_port0>;
+ out-ports {
+ port {
+ etm0_out: endpoint {
+ remote-endpoint =
+ <&cluster0_funnel_in_port0>;
+ };
};
};
};
@@ -584,10 +605,12 @@
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- port {
- etm1_out: endpoint {
- remote-endpoint =
- <&cluster0_funnel_in_port1>;
+ out-ports {
+ port {
+ etm1_out: endpoint {
+ remote-endpoint =
+ <&cluster0_funnel_in_port1>;
+ };
};
};
};
@@ -599,10 +622,12 @@
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- port {
- etm2_out: endpoint {
- remote-endpoint =
- <&cluster0_funnel_in_port2>;
+ out-ports {
+ port {
+ etm2_out: endpoint {
+ remote-endpoint =
+ <&cluster0_funnel_in_port2>;
+ };
};
};
};
@@ -614,10 +639,12 @@
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- port {
- etm3_out: endpoint {
- remote-endpoint =
- <&cluster0_funnel_in_port3>;
+ out-ports {
+ port {
+ etm3_out: endpoint {
+ remote-endpoint =
+ <&cluster0_funnel_in_port3>;
+ };
};
};
};
@@ -629,10 +656,12 @@
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- port {
- etm4_out: endpoint {
- remote-endpoint =
- <&cluster1_funnel_in_port0>;
+ out-ports {
+ port {
+ etm4_out: endpoint {
+ remote-endpoint =
+ <&cluster1_funnel_in_port0>;
+ };
};
};
};
@@ -644,10 +673,12 @@
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- port {
- etm5_out: endpoint {
- remote-endpoint =
- <&cluster1_funnel_in_port1>;
+ out-ports {
+ port {
+ etm5_out: endpoint {
+ remote-endpoint =
+ <&cluster1_funnel_in_port1>;
+ };
};
};
};
@@ -659,10 +690,12 @@
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- port {
- etm6_out: endpoint {
- remote-endpoint =
- <&cluster1_funnel_in_port2>;
+ out-ports {
+ port {
+ etm6_out: endpoint {
+ remote-endpoint =
+ <&cluster1_funnel_in_port2>;
+ };
};
};
};
@@ -674,10 +707,12 @@
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- port {
- etm7_out: endpoint {
- remote-endpoint =
- <&cluster1_funnel_in_port3>;
+ out-ports {
+ port {
+ etm7_out: endpoint {
+ remote-endpoint =
+ <&cluster1_funnel_in_port3>;
+ };
};
};
};
--
2.7.4
^ permalink raw reply related [flat|nested] 51+ messages in thread* [PATCH 03/11] dts: spreadtrum: Update coresight bindings for hardware ports
@ 2018-09-11 10:17 ` Suzuki K Poulose
0 siblings, 0 replies; 51+ messages in thread
From: Suzuki K Poulose @ 2018-09-11 10:17 UTC (permalink / raw)
To: linux-arm-kernel
Switch to the new coresight bindings for hw ports
Cc: orsonzhai at gmail.com
Cc: zhang.lyra at gmail.com
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
---
arch/arm64/boot/dts/sprd/sc9836.dtsi | 74 ++++++++------
arch/arm64/boot/dts/sprd/sc9860.dtsi | 183 +++++++++++++++++++++--------------
2 files changed, 151 insertions(+), 106 deletions(-)
diff --git a/arch/arm64/boot/dts/sprd/sc9836.dtsi b/arch/arm64/boot/dts/sprd/sc9836.dtsi
index 63894c4..416f271 100644
--- a/arch/arm64/boot/dts/sprd/sc9836.dtsi
+++ b/arch/arm64/boot/dts/sprd/sc9836.dtsi
@@ -50,10 +50,11 @@
reg = <0 0x10003000 0 0x1000>;
clocks = <&clk26mhz>;
clock-names = "apb_pclk";
- port {
- etf_in: endpoint {
- slave-mode;
- remote-endpoint = <&funnel_out_port0>;
+ in-ports {
+ port {
+ etf_in: endpoint {
+ remote-endpoint = <&funnel_out_port0>;
+ };
};
};
};
@@ -63,55 +64,54 @@
reg = <0 0x10001000 0 0x1000>;
clocks = <&clk26mhz>;
clock-names = "apb_pclk";
- ports {
+
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
- /* funnel output port */
port at 0 {
reg = <0>;
funnel_out_port0: endpoint {
remote-endpoint = <&etf_in>;
};
};
+ };
- /* funnel input port 0-4 */
- port at 1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
reg = <0>;
funnel_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&etm0_out>;
};
};
- port at 2 {
+ port at 1 {
reg = <1>;
funnel_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&etm1_out>;
};
};
- port at 3 {
+ port at 2 {
reg = <2>;
funnel_in_port2: endpoint {
- slave-mode;
remote-endpoint = <&etm2_out>;
};
};
- port at 4 {
+ port at 3 {
reg = <3>;
funnel_in_port3: endpoint {
- slave-mode;
remote-endpoint = <&etm3_out>;
};
};
- port at 5 {
+ port at 4 {
reg = <4>;
funnel_in_port4: endpoint {
- slave-mode;
remote-endpoint = <&stm_out>;
};
};
@@ -126,9 +126,11 @@
cpu = <&cpu0>;
clocks = <&clk26mhz>;
clock-names = "apb_pclk";
- port {
- etm0_out: endpoint {
- remote-endpoint = <&funnel_in_port0>;
+ out-ports {
+ port {
+ etm0_out: endpoint {
+ remote-endpoint = <&funnel_in_port0>;
+ };
};
};
};
@@ -140,9 +142,11 @@
cpu = <&cpu1>;
clocks = <&clk26mhz>;
clock-names = "apb_pclk";
- port {
- etm1_out: endpoint {
- remote-endpoint = <&funnel_in_port1>;
+ out-ports {
+ port {
+ etm1_out: endpoint {
+ remote-endpoint = <&funnel_in_port1>;
+ };
};
};
};
@@ -154,9 +158,11 @@
cpu = <&cpu2>;
clocks = <&clk26mhz>;
clock-names = "apb_pclk";
- port {
- etm2_out: endpoint {
- remote-endpoint = <&funnel_in_port2>;
+ out-ports {
+ port {
+ etm2_out: endpoint {
+ remote-endpoint = <&funnel_in_port2>;
+ };
};
};
};
@@ -168,9 +174,11 @@
cpu = <&cpu3>;
clocks = <&clk26mhz>;
clock-names = "apb_pclk";
- port {
- etm3_out: endpoint {
- remote-endpoint = <&funnel_in_port3>;
+ out-ports {
+ port {
+ etm3_out: endpoint {
+ remote-endpoint = <&funnel_in_port3>;
+ };
};
};
};
@@ -182,9 +190,11 @@
reg-names = "stm-base", "stm-stimulus-base";
clocks = <&clk26mhz>;
clock-names = "apb_pclk";
- port {
- stm_out: endpoint {
- remote-endpoint = <&funnel_in_port4>;
+ out-ports {
+ port {
+ stm_out: endpoint {
+ remote-endpoint = <&funnel_in_port4>;
+ };
};
};
};
diff --git a/arch/arm64/boot/dts/sprd/sc9860.dtsi b/arch/arm64/boot/dts/sprd/sc9860.dtsi
index 48f5928..50aef73 100644
--- a/arch/arm64/boot/dts/sprd/sc9860.dtsi
+++ b/arch/arm64/boot/dts/sprd/sc9860.dtsi
@@ -304,7 +304,7 @@
reg = <0 0x10001000 0 0x1000>;
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -314,20 +314,23 @@
remote-endpoint = <&etb_in>;
};
};
+ };
- port at 1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
reg = <0>;
soc_funnel_in_port0: endpoint {
- slave-mode;
remote-endpoint =
<&main_funnel_out_port>;
};
};
- port at 2 {
+ port at 4 {
reg = <4>;
soc_funnel_in_port1: endpoint {
- slave-mode;
remote-endpoint =
<&stm_out_port>;
};
@@ -340,11 +343,12 @@
reg = <0 0x10003000 0 0x1000>;
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- port {
- etb_in: endpoint {
- slave-mode;
- remote-endpoint =
- <&soc_funnel_out_port>;
+ out-ports {
+ port {
+ etb_in: endpoint {
+ remote-endpoint =
+ <&soc_funnel_out_port>;
+ };
};
};
};
@@ -356,10 +360,12 @@
reg-names = "stm-base", "stm-stimulus-base";
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- port {
- stm_out_port: endpoint {
- remote-endpoint =
- <&soc_funnel_in_port1>;
+ out-ports {
+ port {
+ stm_out_port: endpoint {
+ remote-endpoint =
+ <&soc_funnel_in_port1>;
+ };
};
};
};
@@ -369,7 +375,7 @@
reg = <0 0x11001000 0 0x1000>;
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -380,27 +386,29 @@
<&cluster0_etf_in>;
};
};
+ };
- port at 1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
reg = <0>;
cluster0_funnel_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&etm0_out>;
};
};
- port at 2 {
+ port at 1 {
reg = <1>;
cluster0_funnel_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&etm1_out>;
};
};
- port at 3 {
+ port at 2 {
reg = <2>;
cluster0_funnel_in_port2: endpoint {
- slave-mode;
remote-endpoint = <&etm2_out>;
};
};
@@ -408,7 +416,6 @@
port at 4 {
reg = <4>;
cluster0_funnel_in_port3: endpoint {
- slave-mode;
remote-endpoint = <&etm3_out>;
};
};
@@ -420,7 +427,7 @@
reg = <0 0x11002000 0 0x1000>;
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -431,35 +438,36 @@
<&cluster1_etf_in>;
};
};
+ };
- port at 1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
reg = <0>;
cluster1_funnel_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&etm4_out>;
};
};
- port at 2 {
+ port at 1 {
reg = <1>;
cluster1_funnel_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&etm5_out>;
};
};
- port at 3 {
+ port at 2 {
reg = <2>;
cluster1_funnel_in_port2: endpoint {
- slave-mode;
remote-endpoint = <&etm6_out>;
};
};
- port at 4 {
+ port at 3 {
reg = <3>;
cluster1_funnel_in_port3: endpoint {
- slave-mode;
remote-endpoint = <&etm7_out>;
};
};
@@ -472,7 +480,7 @@
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -483,11 +491,15 @@
<&main_funnel_in_port0>;
};
};
+ };
- port at 1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
reg = <0>;
cluster0_etf_in: endpoint {
- slave-mode;
remote-endpoint =
<&cluster0_funnel_out_port>;
};
@@ -501,7 +513,7 @@
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -512,11 +524,15 @@
<&main_funnel_in_port1>;
};
};
+ };
- port at 1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
reg = <0>;
cluster1_etf_in: endpoint {
- slave-mode;
remote-endpoint =
<&cluster1_funnel_out_port>;
};
@@ -530,7 +546,7 @@
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -541,20 +557,23 @@
<&soc_funnel_in_port0>;
};
};
+ };
- port at 1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
reg = <0>;
main_funnel_in_port0: endpoint {
- slave-mode;
remote-endpoint =
<&cluster0_etf_out>;
};
};
- port at 2 {
+ port at 1 {
reg = <1>;
main_funnel_in_port1: endpoint {
- slave-mode;
remote-endpoint =
<&cluster1_etf_out>;
};
@@ -569,10 +588,12 @@
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- port {
- etm0_out: endpoint {
- remote-endpoint =
- <&cluster0_funnel_in_port0>;
+ out-ports {
+ port {
+ etm0_out: endpoint {
+ remote-endpoint =
+ <&cluster0_funnel_in_port0>;
+ };
};
};
};
@@ -584,10 +605,12 @@
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- port {
- etm1_out: endpoint {
- remote-endpoint =
- <&cluster0_funnel_in_port1>;
+ out-ports {
+ port {
+ etm1_out: endpoint {
+ remote-endpoint =
+ <&cluster0_funnel_in_port1>;
+ };
};
};
};
@@ -599,10 +622,12 @@
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- port {
- etm2_out: endpoint {
- remote-endpoint =
- <&cluster0_funnel_in_port2>;
+ out-ports {
+ port {
+ etm2_out: endpoint {
+ remote-endpoint =
+ <&cluster0_funnel_in_port2>;
+ };
};
};
};
@@ -614,10 +639,12 @@
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- port {
- etm3_out: endpoint {
- remote-endpoint =
- <&cluster0_funnel_in_port3>;
+ out-ports {
+ port {
+ etm3_out: endpoint {
+ remote-endpoint =
+ <&cluster0_funnel_in_port3>;
+ };
};
};
};
@@ -629,10 +656,12 @@
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- port {
- etm4_out: endpoint {
- remote-endpoint =
- <&cluster1_funnel_in_port0>;
+ out-ports {
+ port {
+ etm4_out: endpoint {
+ remote-endpoint =
+ <&cluster1_funnel_in_port0>;
+ };
};
};
};
@@ -644,10 +673,12 @@
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- port {
- etm5_out: endpoint {
- remote-endpoint =
- <&cluster1_funnel_in_port1>;
+ out-ports {
+ port {
+ etm5_out: endpoint {
+ remote-endpoint =
+ <&cluster1_funnel_in_port1>;
+ };
};
};
};
@@ -659,10 +690,12 @@
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- port {
- etm6_out: endpoint {
- remote-endpoint =
- <&cluster1_funnel_in_port2>;
+ out-ports {
+ port {
+ etm6_out: endpoint {
+ remote-endpoint =
+ <&cluster1_funnel_in_port2>;
+ };
};
};
};
@@ -674,10 +707,12 @@
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- port {
- etm7_out: endpoint {
- remote-endpoint =
- <&cluster1_funnel_in_port3>;
+ out-ports {
+ port {
+ etm7_out: endpoint {
+ remote-endpoint =
+ <&cluster1_funnel_in_port3>;
+ };
};
};
};
--
2.7.4
^ permalink raw reply related [flat|nested] 51+ messages in thread
* [PATCH 04/11] dts: qcom: Update coresight bindings for hardware ports
2018-09-11 10:17 ` Suzuki K Poulose
@ 2018-09-11 10:17 ` Suzuki K Poulose
-1 siblings, 0 replies; 51+ messages in thread
From: Suzuki K Poulose @ 2018-09-11 10:17 UTC (permalink / raw)
To: linux-arm-kernel
Cc: linux-kernel, robh, frowand.list, devicetree, mathieu.poirier,
arm, sudeep.holla, Suzuki K Poulose, Andy Gross, David Brown,
Ivan T . Ivanov
Switch to updated coresight bindings for hw ports
Cc: Andy Gross <andy.gross@linaro.org>
Cc: David Brown <david.brown@linaro.org>
Cc: Ivan T. Ivanov <ivan.ivanov@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
---
arch/arm64/boot/dts/qcom/msm8916.dtsi | 98 ++++++++++++++++++++++-------------
1 file changed, 63 insertions(+), 35 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 7b32b89..5bed52b 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -1099,10 +1099,11 @@
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- port {
- tpiu_in: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out1>;
+ out-ports {
+ port {
+ tpiu_in: endpoint {
+ remote-endpoint = <&replicator_out1>;
+ };
};
};
};
@@ -1114,7 +1115,7 @@
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- ports {
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -1132,11 +1133,16 @@
port@4 {
reg = <4>;
funnel0_in4: endpoint {
- slave-mode;
remote-endpoint = <&funnel1_out>;
};
};
- port@8 {
+ };
+
+ out-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
funnel0_out: endpoint {
remote-endpoint = <&etf_in>;
@@ -1152,7 +1158,7 @@
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -1162,16 +1168,22 @@
remote-endpoint = <&etr_in>;
};
};
+
port@1 {
reg = <1>;
replicator_out1: endpoint {
remote-endpoint = <&tpiu_in>;
};
};
- port@2 {
+ };
+
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
replicator_in: endpoint {
- slave-mode;
remote-endpoint = <&etf_out>;
};
};
@@ -1185,18 +1197,23 @@
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- ports {
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
etf_in: endpoint {
- slave-mode;
remote-endpoint = <&funnel0_out>;
};
};
- port@1 {
+ };
+
+ out-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
etf_out: endpoint {
remote-endpoint = <&replicator_in>;
@@ -1212,10 +1229,11 @@
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- port {
- etr_in: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out0>;
+ in-ports {
+ port {
+ etr_in: endpoint {
+ remote-endpoint = <&replicator_out0>;
+ };
};
};
};
@@ -1227,39 +1245,41 @@
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- ports {
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
funnel1_in0: endpoint {
- slave-mode;
remote-endpoint = <&etm0_out>;
};
};
port@1 {
reg = <1>;
funnel1_in1: endpoint {
- slave-mode;
remote-endpoint = <&etm1_out>;
};
};
port@2 {
reg = <2>;
funnel1_in2: endpoint {
- slave-mode;
remote-endpoint = <&etm2_out>;
};
};
port@3 {
reg = <3>;
funnel1_in3: endpoint {
- slave-mode;
remote-endpoint = <&etm3_out>;
};
};
- port@4 {
+ };
+
+ out-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
funnel1_out: endpoint {
remote-endpoint = <&funnel0_in4>;
@@ -1309,9 +1329,11 @@
cpu = <&CPU0>;
- port {
- etm0_out: endpoint {
- remote-endpoint = <&funnel1_in0>;
+ out-ports {
+ port {
+ etm0_out: endpoint {
+ remote-endpoint = <&funnel1_in0>;
+ };
};
};
};
@@ -1325,9 +1347,11 @@
cpu = <&CPU1>;
- port {
- etm1_out: endpoint {
- remote-endpoint = <&funnel1_in1>;
+ out-ports {
+ port {
+ etm1_out: endpoint {
+ remote-endpoint = <&funnel1_in1>;
+ };
};
};
};
@@ -1341,9 +1365,11 @@
cpu = <&CPU2>;
- port {
- etm2_out: endpoint {
- remote-endpoint = <&funnel1_in2>;
+ out-ports {
+ port {
+ etm2_out: endpoint {
+ remote-endpoint = <&funnel1_in2>;
+ };
};
};
};
@@ -1357,9 +1383,11 @@
cpu = <&CPU3>;
- port {
- etm3_out: endpoint {
- remote-endpoint = <&funnel1_in3>;
+ out-ports {
+ port {
+ etm3_out: endpoint {
+ remote-endpoint = <&funnel1_in3>;
+ };
};
};
};
--
2.7.4
^ permalink raw reply related [flat|nested] 51+ messages in thread* [PATCH 04/11] dts: qcom: Update coresight bindings for hardware ports
@ 2018-09-11 10:17 ` Suzuki K Poulose
0 siblings, 0 replies; 51+ messages in thread
From: Suzuki K Poulose @ 2018-09-11 10:17 UTC (permalink / raw)
To: linux-arm-kernel
Switch to updated coresight bindings for hw ports
Cc: Andy Gross <andy.gross@linaro.org>
Cc: David Brown <david.brown@linaro.org>
Cc: Ivan T. Ivanov <ivan.ivanov@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
---
arch/arm64/boot/dts/qcom/msm8916.dtsi | 98 ++++++++++++++++++++++-------------
1 file changed, 63 insertions(+), 35 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 7b32b89..5bed52b 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -1099,10 +1099,11 @@
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- port {
- tpiu_in: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out1>;
+ out-ports {
+ port {
+ tpiu_in: endpoint {
+ remote-endpoint = <&replicator_out1>;
+ };
};
};
};
@@ -1114,7 +1115,7 @@
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- ports {
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -1132,11 +1133,16 @@
port at 4 {
reg = <4>;
funnel0_in4: endpoint {
- slave-mode;
remote-endpoint = <&funnel1_out>;
};
};
- port at 8 {
+ };
+
+ out-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
reg = <0>;
funnel0_out: endpoint {
remote-endpoint = <&etf_in>;
@@ -1152,7 +1158,7 @@
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -1162,16 +1168,22 @@
remote-endpoint = <&etr_in>;
};
};
+
port at 1 {
reg = <1>;
replicator_out1: endpoint {
remote-endpoint = <&tpiu_in>;
};
};
- port at 2 {
+ };
+
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
reg = <0>;
replicator_in: endpoint {
- slave-mode;
remote-endpoint = <&etf_out>;
};
};
@@ -1185,18 +1197,23 @@
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- ports {
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
port at 0 {
reg = <0>;
etf_in: endpoint {
- slave-mode;
remote-endpoint = <&funnel0_out>;
};
};
- port at 1 {
+ };
+
+ out-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
reg = <0>;
etf_out: endpoint {
remote-endpoint = <&replicator_in>;
@@ -1212,10 +1229,11 @@
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- port {
- etr_in: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out0>;
+ in-ports {
+ port {
+ etr_in: endpoint {
+ remote-endpoint = <&replicator_out0>;
+ };
};
};
};
@@ -1227,39 +1245,41 @@
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- ports {
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
port at 0 {
reg = <0>;
funnel1_in0: endpoint {
- slave-mode;
remote-endpoint = <&etm0_out>;
};
};
port at 1 {
reg = <1>;
funnel1_in1: endpoint {
- slave-mode;
remote-endpoint = <&etm1_out>;
};
};
port at 2 {
reg = <2>;
funnel1_in2: endpoint {
- slave-mode;
remote-endpoint = <&etm2_out>;
};
};
port at 3 {
reg = <3>;
funnel1_in3: endpoint {
- slave-mode;
remote-endpoint = <&etm3_out>;
};
};
- port at 4 {
+ };
+
+ out-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
reg = <0>;
funnel1_out: endpoint {
remote-endpoint = <&funnel0_in4>;
@@ -1309,9 +1329,11 @@
cpu = <&CPU0>;
- port {
- etm0_out: endpoint {
- remote-endpoint = <&funnel1_in0>;
+ out-ports {
+ port {
+ etm0_out: endpoint {
+ remote-endpoint = <&funnel1_in0>;
+ };
};
};
};
@@ -1325,9 +1347,11 @@
cpu = <&CPU1>;
- port {
- etm1_out: endpoint {
- remote-endpoint = <&funnel1_in1>;
+ out-ports {
+ port {
+ etm1_out: endpoint {
+ remote-endpoint = <&funnel1_in1>;
+ };
};
};
};
@@ -1341,9 +1365,11 @@
cpu = <&CPU2>;
- port {
- etm2_out: endpoint {
- remote-endpoint = <&funnel1_in2>;
+ out-ports {
+ port {
+ etm2_out: endpoint {
+ remote-endpoint = <&funnel1_in2>;
+ };
};
};
};
@@ -1357,9 +1383,11 @@
cpu = <&CPU3>;
- port {
- etm3_out: endpoint {
- remote-endpoint = <&funnel1_in3>;
+ out-ports {
+ port {
+ etm3_out: endpoint {
+ remote-endpoint = <&funnel1_in3>;
+ };
};
};
};
--
2.7.4
^ permalink raw reply related [flat|nested] 51+ messages in thread* Re: [PATCH 04/11] dts: qcom: Update coresight bindings for hardware ports
2018-09-11 10:17 ` Suzuki K Poulose
@ 2018-09-12 10:17 ` leo.yan at linaro.org
-1 siblings, 0 replies; 51+ messages in thread
From: leo.yan @ 2018-09-12 10:17 UTC (permalink / raw)
To: Suzuki K Poulose
Cc: linux-arm-kernel, linux-kernel, robh, frowand.list, devicetree,
mathieu.poirier, arm, sudeep.holla, Andy Gross, David Brown,
Ivan T . Ivanov
Hi Suzuki,
On Tue, Sep 11, 2018 at 11:17:05AM +0100, Suzuki K Poulose wrote:
> Switch to updated coresight bindings for hw ports
>
> Cc: Andy Gross <andy.gross@linaro.org>
> Cc: David Brown <david.brown@linaro.org>
> Cc: Ivan T. Ivanov <ivan.ivanov@linaro.org>
> Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
> ---
> arch/arm64/boot/dts/qcom/msm8916.dtsi | 98 ++++++++++++++++++++++-------------
> 1 file changed, 63 insertions(+), 35 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
> index 7b32b89..5bed52b 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
> @@ -1099,10 +1099,11 @@
> clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> clock-names = "apb_pclk", "atclk";
>
> - port {
> - tpiu_in: endpoint {
> - slave-mode;
> - remote-endpoint = <&replicator_out1>;
> + out-ports {
Here should be in-ports for tpiu node?
BTW, if upper comment is valid, this means the DT binding doc also
gives wrong example for tpiu node [1].
I tested this patch with upper changing to 'in-ports', etm with perf
mode can work well on DB410c board.
[...]
Thanks,
Leo Yan
[1] https://git.linaro.org/kernel/coresight.git/tree/Documentation/devicetree/bindings/arm/coresight.txt?h=next#n135
^ permalink raw reply [flat|nested] 51+ messages in thread* [PATCH 04/11] dts: qcom: Update coresight bindings for hardware ports
@ 2018-09-12 10:17 ` leo.yan at linaro.org
0 siblings, 0 replies; 51+ messages in thread
From: leo.yan at linaro.org @ 2018-09-12 10:17 UTC (permalink / raw)
To: linux-arm-kernel
Hi Suzuki,
On Tue, Sep 11, 2018 at 11:17:05AM +0100, Suzuki K Poulose wrote:
> Switch to updated coresight bindings for hw ports
>
> Cc: Andy Gross <andy.gross@linaro.org>
> Cc: David Brown <david.brown@linaro.org>
> Cc: Ivan T. Ivanov <ivan.ivanov@linaro.org>
> Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
> ---
> arch/arm64/boot/dts/qcom/msm8916.dtsi | 98 ++++++++++++++++++++++-------------
> 1 file changed, 63 insertions(+), 35 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
> index 7b32b89..5bed52b 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
> @@ -1099,10 +1099,11 @@
> clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> clock-names = "apb_pclk", "atclk";
>
> - port {
> - tpiu_in: endpoint {
> - slave-mode;
> - remote-endpoint = <&replicator_out1>;
> + out-ports {
Here should be in-ports for tpiu node?
BTW, if upper comment is valid, this means the DT binding doc also
gives wrong example for tpiu node [1].
I tested this patch with upper changing to 'in-ports', etm with perf
mode can work well on DB410c board.
[...]
Thanks,
Leo Yan
[1] https://git.linaro.org/kernel/coresight.git/tree/Documentation/devicetree/bindings/arm/coresight.txt?h=next#n135
^ permalink raw reply [flat|nested] 51+ messages in thread* Re: [PATCH 04/11] dts: qcom: Update coresight bindings for hardware ports
2018-09-12 10:17 ` leo.yan at linaro.org
@ 2018-09-12 10:31 ` Suzuki K Poulose
-1 siblings, 0 replies; 51+ messages in thread
From: Suzuki K Poulose @ 2018-09-12 10:31 UTC (permalink / raw)
To: leo.yan
Cc: linux-arm-kernel, linux-kernel, robh, frowand.list, devicetree,
mathieu.poirier, arm, sudeep.holla, Andy Gross, David Brown,
Ivan T . Ivanov
Hi Leo,
On 12/09/18 11:17, leo.yan@linaro.org wrote:
> Hi Suzuki,
>
> On Tue, Sep 11, 2018 at 11:17:05AM +0100, Suzuki K Poulose wrote:
>> Switch to updated coresight bindings for hw ports
>>
>> Cc: Andy Gross <andy.gross@linaro.org>
>> Cc: David Brown <david.brown@linaro.org>
>> Cc: Ivan T. Ivanov <ivan.ivanov@linaro.org>
>> Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
>> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
>> ---
>> arch/arm64/boot/dts/qcom/msm8916.dtsi | 98 ++++++++++++++++++++++-------------
>> 1 file changed, 63 insertions(+), 35 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
>> index 7b32b89..5bed52b 100644
>> --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
>> @@ -1099,10 +1099,11 @@
>> clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
>> clock-names = "apb_pclk", "atclk";
>>
>> - port {
>> - tpiu_in: endpoint {
>> - slave-mode;
>> - remote-endpoint = <&replicator_out1>;
>> + out-ports {
>
> Here should be in-ports for tpiu node?
>
> BTW, if upper comment is valid, this means the DT binding doc also
> gives wrong example for tpiu node [1].
You are right on both counts.
>
> I tested this patch with upper changing to 'in-ports', etm with perf
> mode can work well on DB410c board.
>
Thanks a lot for the testing. I will fix both the problems.
Suzuki
^ permalink raw reply [flat|nested] 51+ messages in thread* [PATCH 04/11] dts: qcom: Update coresight bindings for hardware ports
@ 2018-09-12 10:31 ` Suzuki K Poulose
0 siblings, 0 replies; 51+ messages in thread
From: Suzuki K Poulose @ 2018-09-12 10:31 UTC (permalink / raw)
To: linux-arm-kernel
Hi Leo,
On 12/09/18 11:17, leo.yan at linaro.org wrote:
> Hi Suzuki,
>
> On Tue, Sep 11, 2018 at 11:17:05AM +0100, Suzuki K Poulose wrote:
>> Switch to updated coresight bindings for hw ports
>>
>> Cc: Andy Gross <andy.gross@linaro.org>
>> Cc: David Brown <david.brown@linaro.org>
>> Cc: Ivan T. Ivanov <ivan.ivanov@linaro.org>
>> Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
>> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
>> ---
>> arch/arm64/boot/dts/qcom/msm8916.dtsi | 98 ++++++++++++++++++++++-------------
>> 1 file changed, 63 insertions(+), 35 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
>> index 7b32b89..5bed52b 100644
>> --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
>> @@ -1099,10 +1099,11 @@
>> clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
>> clock-names = "apb_pclk", "atclk";
>>
>> - port {
>> - tpiu_in: endpoint {
>> - slave-mode;
>> - remote-endpoint = <&replicator_out1>;
>> + out-ports {
>
> Here should be in-ports for tpiu node?
>
> BTW, if upper comment is valid, this means the DT binding doc also
> gives wrong example for tpiu node [1].
You are right on both counts.
>
> I tested this patch with upper changing to 'in-ports', etm with perf
> mode can work well on DB410c board.
>
Thanks a lot for the testing. I will fix both the problems.
Suzuki
^ permalink raw reply [flat|nested] 51+ messages in thread
* [PATCH 05/11] dts: arm: hisilicon: Update coresight bindings for hardware ports
2018-09-11 10:17 ` Suzuki K Poulose
@ 2018-09-11 10:17 ` Suzuki K Poulose
-1 siblings, 0 replies; 51+ messages in thread
From: Suzuki K Poulose @ 2018-09-11 10:17 UTC (permalink / raw)
To: linux-arm-kernel
Cc: linux-kernel, robh, frowand.list, devicetree, mathieu.poirier,
arm, sudeep.holla, Suzuki K Poulose, Wei Xu
Switch to the new the hardware port bindings.
Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
---
arch/arm/boot/dts/hip04.dtsi | 322 ++++++++++++++++++++++++-------------------
1 file changed, 183 insertions(+), 139 deletions(-)
diff --git a/arch/arm/boot/dts/hip04.dtsi b/arch/arm/boot/dts/hip04.dtsi
index 44044f2..9ab1980 100644
--- a/arch/arm/boot/dts/hip04.dtsi
+++ b/arch/arm/boot/dts/hip04.dtsi
@@ -277,10 +277,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
- port {
- etb0_in_port: endpoint@0 {
- slave-mode;
- remote-endpoint = <&replicator0_out_port0>;
+ in-ports {
+ port {
+ etb0_in_port: endpoint@0 {
+ remote-endpoint = <&replicator0_out_port0>;
+ };
};
};
};
@@ -291,10 +292,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
- port {
- etb1_in_port: endpoint@0 {
- slave-mode;
- remote-endpoint = <&replicator1_out_port0>;
+ in-ports {
+ port {
+ etb1_in_port: endpoint@0 {
+ remote-endpoint = <&replicator1_out_port0>;
+ };
};
};
};
@@ -305,10 +307,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
- port {
- etb2_in_port: endpoint@0 {
- slave-mode;
- remote-endpoint = <&replicator2_out_port0>;
+ in-ports {
+ port {
+ etb2_in_port: endpoint@0 {
+ remote-endpoint = <&replicator2_out_port0>;
+ };
};
};
};
@@ -319,10 +322,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
- port {
- etb3_in_port: endpoint@0 {
- slave-mode;
- remote-endpoint = <&replicator3_out_port0>;
+ in-ports {
+ port {
+ etb3_in_port: endpoint@0 {
+ remote-endpoint = <&replicator3_out_port0>;
+ };
};
};
};
@@ -333,10 +337,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
- port {
- tpiu_in_port: endpoint@0 {
- slave-mode;
- remote-endpoint = <&funnel4_out_port0>;
+ in-ports {
+ port {
+ tpiu_in_port: endpoint@0 {
+ remote-endpoint = <&funnel4_out_port0>;
+ };
};
};
};
@@ -347,7 +352,7 @@
*/
compatible = "arm,coresight-replicator";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -365,12 +370,16 @@
remote-endpoint = <&funnel4_in_port0>;
};
};
+ };
+
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
/* replicator input port */
- port@2 {
+ port@0 {
reg = <0>;
replicator0_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&funnel0_out_port0>;
};
};
@@ -383,7 +392,7 @@
*/
compatible = "arm,coresight-replicator";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -401,12 +410,16 @@
remote-endpoint = <&funnel4_in_port1>;
};
};
+ };
+
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
/* replicator input port */
- port@2 {
+ port@0 {
reg = <0>;
replicator1_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&funnel1_out_port0>;
};
};
@@ -419,11 +432,10 @@
*/
compatible = "arm,coresight-replicator";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
- /* replicator output ports */
port@0 {
reg = <0>;
replicator2_out_port0: endpoint {
@@ -437,12 +449,15 @@
remote-endpoint = <&funnel4_in_port2>;
};
};
+ };
- /* replicator input port */
- port@2 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
replicator2_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&funnel2_out_port0>;
};
};
@@ -455,11 +470,10 @@
*/
compatible = "arm,coresight-replicator";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
- /* replicator output ports */
port@0 {
reg = <0>;
replicator3_out_port0: endpoint {
@@ -473,12 +487,15 @@
remote-endpoint = <&funnel4_in_port3>;
};
};
+ };
- /* replicator input port */
- port@2 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
replicator3_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&funnel3_out_port0>;
};
};
@@ -491,11 +508,10 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
- /* funnel output port */
port@0 {
reg = <0>;
funnel0_out_port0: endpoint {
@@ -503,36 +519,36 @@
<&replicator0_in_port0>;
};
};
+ };
- /* funnel input ports */
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
funnel0_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&ptm0_out_port>;
};
};
- port@2 {
+ port@1 {
reg = <1>;
funnel0_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&ptm1_out_port>;
};
};
- port@3 {
+ port@2 {
reg = <2>;
funnel0_in_port2: endpoint {
- slave-mode;
remote-endpoint = <&ptm2_out_port>;
};
};
- port@4 {
+ port@3 {
reg = <3>;
funnel0_in_port3: endpoint {
- slave-mode;
remote-endpoint = <&ptm3_out_port>;
};
};
@@ -545,11 +561,10 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
- /* funnel output port */
port@0 {
reg = <0>;
funnel1_out_port0: endpoint {
@@ -557,36 +572,36 @@
<&replicator1_in_port0>;
};
};
+ };
- /* funnel input ports */
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
funnel1_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&ptm4_out_port>;
};
};
- port@2 {
+ port@1 {
reg = <1>;
funnel1_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&ptm5_out_port>;
};
};
- port@3 {
+ port@2 {
reg = <2>;
funnel1_in_port2: endpoint {
- slave-mode;
remote-endpoint = <&ptm6_out_port>;
};
};
- port@4 {
+ port@3 {
reg = <3>;
funnel1_in_port3: endpoint {
- slave-mode;
remote-endpoint = <&ptm7_out_port>;
};
};
@@ -599,11 +614,10 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
- /* funnel output port */
port@0 {
reg = <0>;
funnel2_out_port0: endpoint {
@@ -611,36 +625,36 @@
<&replicator2_in_port0>;
};
};
+ };
- /* funnel input ports */
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
funnel2_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&ptm8_out_port>;
};
};
- port@2 {
+ port@1 {
reg = <1>;
funnel2_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&ptm9_out_port>;
};
};
- port@3 {
+ port@2 {
reg = <2>;
funnel2_in_port2: endpoint {
- slave-mode;
remote-endpoint = <&ptm10_out_port>;
};
};
- port@4 {
+ port@3 {
reg = <3>;
funnel2_in_port3: endpoint {
- slave-mode;
remote-endpoint = <&ptm11_out_port>;
};
};
@@ -653,11 +667,10 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
- /* funnel output port */
port@0 {
reg = <0>;
funnel3_out_port0: endpoint {
@@ -665,36 +678,36 @@
<&replicator3_in_port0>;
};
};
+ };
- /* funnel input ports */
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
funnel3_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&ptm12_out_port>;
};
};
- port@2 {
+ port@1 {
reg = <1>;
funnel3_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&ptm13_out_port>;
};
};
- port@3 {
+ port@2 {
reg = <2>;
funnel3_in_port2: endpoint {
- slave-mode;
remote-endpoint = <&ptm14_out_port>;
};
};
- port@4 {
+ port@3 {
reg = <3>;
funnel3_in_port3: endpoint {
- slave-mode;
remote-endpoint = <&ptm15_out_port>;
};
};
@@ -707,50 +720,49 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
- /* funnel output port */
port@0 {
reg = <0>;
funnel4_out_port0: endpoint {
remote-endpoint = <&tpiu_in_port>;
};
};
+ };
- /* funnel input ports */
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
funnel4_in_port0: endpoint {
- slave-mode;
remote-endpoint =
<&replicator0_out_port1>;
};
};
- port@2 {
+ port@1 {
reg = <1>;
funnel4_in_port1: endpoint {
- slave-mode;
remote-endpoint =
<&replicator1_out_port1>;
};
};
- port@3 {
+ port@2 {
reg = <2>;
funnel4_in_port2: endpoint {
- slave-mode;
remote-endpoint =
<&replicator2_out_port1>;
};
};
- port@4 {
+ port@3 {
reg = <3>;
funnel4_in_port3: endpoint {
- slave-mode;
remote-endpoint =
<&replicator3_out_port1>;
};
@@ -765,9 +777,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU0>;
- port {
- ptm0_out_port: endpoint {
- remote-endpoint = <&funnel0_in_port0>;
+ out-ports {
+ port {
+ ptm0_out_port: endpoint {
+ remote-endpoint = <&funnel0_in_port0>;
+ };
};
};
};
@@ -779,9 +793,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU1>;
- port {
- ptm1_out_port: endpoint {
- remote-endpoint = <&funnel0_in_port1>;
+ out-ports {
+ port {
+ ptm1_out_port: endpoint {
+ remote-endpoint = <&funnel0_in_port1>;
+ };
};
};
};
@@ -793,9 +809,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU2>;
- port {
- ptm2_out_port: endpoint {
- remote-endpoint = <&funnel0_in_port2>;
+ out-ports {
+ port {
+ ptm2_out_port: endpoint {
+ remote-endpoint = <&funnel0_in_port2>;
+ };
};
};
};
@@ -807,9 +825,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU3>;
- port {
- ptm3_out_port: endpoint {
- remote-endpoint = <&funnel0_in_port3>;
+ out-ports {
+ port {
+ ptm3_out_port: endpoint {
+ remote-endpoint = <&funnel0_in_port3>;
+ };
};
};
};
@@ -821,9 +841,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU4>;
- port {
- ptm4_out_port: endpoint {
- remote-endpoint = <&funnel1_in_port0>;
+ out-ports {
+ port {
+ ptm4_out_port: endpoint {
+ remote-endpoint = <&funnel1_in_port0>;
+ };
};
};
};
@@ -835,9 +857,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU5>;
- port {
- ptm5_out_port: endpoint {
- remote-endpoint = <&funnel1_in_port1>;
+ out-ports {
+ port {
+ ptm5_out_port: endpoint {
+ remote-endpoint = <&funnel1_in_port1>;
+ };
};
};
};
@@ -849,9 +873,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU6>;
- port {
- ptm6_out_port: endpoint {
- remote-endpoint = <&funnel1_in_port2>;
+ out-ports {
+ port {
+ ptm6_out_port: endpoint {
+ remote-endpoint = <&funnel1_in_port2>;
+ };
};
};
};
@@ -863,9 +889,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU7>;
- port {
- ptm7_out_port: endpoint {
- remote-endpoint = <&funnel1_in_port3>;
+ out-ports {
+ port {
+ ptm7_out_port: endpoint {
+ remote-endpoint = <&funnel1_in_port3>;
+ };
};
};
};
@@ -877,9 +905,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU8>;
- port {
- ptm8_out_port: endpoint {
- remote-endpoint = <&funnel2_in_port0>;
+ out-ports {
+ port {
+ ptm8_out_port: endpoint {
+ remote-endpoint = <&funnel2_in_port0>;
+ };
};
};
};
@@ -890,9 +920,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU9>;
- port {
- ptm9_out_port: endpoint {
- remote-endpoint = <&funnel2_in_port1>;
+ out-ports {
+ port {
+ ptm9_out_port: endpoint {
+ remote-endpoint = <&funnel2_in_port1>;
+ };
};
};
};
@@ -904,9 +936,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU10>;
- port {
- ptm10_out_port: endpoint {
- remote-endpoint = <&funnel2_in_port2>;
+ out-ports {
+ port {
+ ptm10_out_port: endpoint {
+ remote-endpoint = <&funnel2_in_port2>;
+ };
};
};
};
@@ -918,9 +952,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU11>;
- port {
- ptm11_out_port: endpoint {
- remote-endpoint = <&funnel2_in_port3>;
+ out-ports {
+ port {
+ ptm11_out_port: endpoint {
+ remote-endpoint = <&funnel2_in_port3>;
+ };
};
};
};
@@ -932,9 +968,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU12>;
- port {
- ptm12_out_port: endpoint {
- remote-endpoint = <&funnel3_in_port0>;
+ out-ports {
+ port {
+ ptm12_out_port: endpoint {
+ remote-endpoint = <&funnel3_in_port0>;
+ };
};
};
};
@@ -946,9 +984,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU13>;
- port {
- ptm13_out_port: endpoint {
- remote-endpoint = <&funnel3_in_port1>;
+ out-ports {
+ port {
+ ptm13_out_port: endpoint {
+ remote-endpoint = <&funnel3_in_port1>;
+ };
};
};
};
@@ -960,9 +1000,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU14>;
- port {
- ptm14_out_port: endpoint {
- remote-endpoint = <&funnel3_in_port2>;
+ out-ports {
+ port {
+ ptm14_out_port: endpoint {
+ remote-endpoint = <&funnel3_in_port2>;
+ };
};
};
};
@@ -974,9 +1016,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU15>;
- port {
- ptm15_out_port: endpoint {
- remote-endpoint = <&funnel3_in_port3>;
+ out-ports {
+ port {
+ ptm15_out_port: endpoint {
+ remote-endpoint = <&funnel3_in_port3>;
+ };
};
};
};
--
2.7.4
^ permalink raw reply related [flat|nested] 51+ messages in thread* [PATCH 05/11] dts: arm: hisilicon: Update coresight bindings for hardware ports
@ 2018-09-11 10:17 ` Suzuki K Poulose
0 siblings, 0 replies; 51+ messages in thread
From: Suzuki K Poulose @ 2018-09-11 10:17 UTC (permalink / raw)
To: linux-arm-kernel
Switch to the new the hardware port bindings.
Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
---
arch/arm/boot/dts/hip04.dtsi | 322 ++++++++++++++++++++++++-------------------
1 file changed, 183 insertions(+), 139 deletions(-)
diff --git a/arch/arm/boot/dts/hip04.dtsi b/arch/arm/boot/dts/hip04.dtsi
index 44044f2..9ab1980 100644
--- a/arch/arm/boot/dts/hip04.dtsi
+++ b/arch/arm/boot/dts/hip04.dtsi
@@ -277,10 +277,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
- port {
- etb0_in_port: endpoint at 0 {
- slave-mode;
- remote-endpoint = <&replicator0_out_port0>;
+ in-ports {
+ port {
+ etb0_in_port: endpoint at 0 {
+ remote-endpoint = <&replicator0_out_port0>;
+ };
};
};
};
@@ -291,10 +292,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
- port {
- etb1_in_port: endpoint at 0 {
- slave-mode;
- remote-endpoint = <&replicator1_out_port0>;
+ in-ports {
+ port {
+ etb1_in_port: endpoint at 0 {
+ remote-endpoint = <&replicator1_out_port0>;
+ };
};
};
};
@@ -305,10 +307,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
- port {
- etb2_in_port: endpoint at 0 {
- slave-mode;
- remote-endpoint = <&replicator2_out_port0>;
+ in-ports {
+ port {
+ etb2_in_port: endpoint at 0 {
+ remote-endpoint = <&replicator2_out_port0>;
+ };
};
};
};
@@ -319,10 +322,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
- port {
- etb3_in_port: endpoint at 0 {
- slave-mode;
- remote-endpoint = <&replicator3_out_port0>;
+ in-ports {
+ port {
+ etb3_in_port: endpoint at 0 {
+ remote-endpoint = <&replicator3_out_port0>;
+ };
};
};
};
@@ -333,10 +337,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
- port {
- tpiu_in_port: endpoint at 0 {
- slave-mode;
- remote-endpoint = <&funnel4_out_port0>;
+ in-ports {
+ port {
+ tpiu_in_port: endpoint at 0 {
+ remote-endpoint = <&funnel4_out_port0>;
+ };
};
};
};
@@ -347,7 +352,7 @@
*/
compatible = "arm,coresight-replicator";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -365,12 +370,16 @@
remote-endpoint = <&funnel4_in_port0>;
};
};
+ };
+
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
/* replicator input port */
- port at 2 {
+ port at 0 {
reg = <0>;
replicator0_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&funnel0_out_port0>;
};
};
@@ -383,7 +392,7 @@
*/
compatible = "arm,coresight-replicator";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -401,12 +410,16 @@
remote-endpoint = <&funnel4_in_port1>;
};
};
+ };
+
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
/* replicator input port */
- port at 2 {
+ port at 0 {
reg = <0>;
replicator1_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&funnel1_out_port0>;
};
};
@@ -419,11 +432,10 @@
*/
compatible = "arm,coresight-replicator";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
- /* replicator output ports */
port at 0 {
reg = <0>;
replicator2_out_port0: endpoint {
@@ -437,12 +449,15 @@
remote-endpoint = <&funnel4_in_port2>;
};
};
+ };
- /* replicator input port */
- port at 2 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
reg = <0>;
replicator2_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&funnel2_out_port0>;
};
};
@@ -455,11 +470,10 @@
*/
compatible = "arm,coresight-replicator";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
- /* replicator output ports */
port at 0 {
reg = <0>;
replicator3_out_port0: endpoint {
@@ -473,12 +487,15 @@
remote-endpoint = <&funnel4_in_port3>;
};
};
+ };
- /* replicator input port */
- port at 2 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
reg = <0>;
replicator3_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&funnel3_out_port0>;
};
};
@@ -491,11 +508,10 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
- /* funnel output port */
port at 0 {
reg = <0>;
funnel0_out_port0: endpoint {
@@ -503,36 +519,36 @@
<&replicator0_in_port0>;
};
};
+ };
- /* funnel input ports */
- port at 1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
reg = <0>;
funnel0_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&ptm0_out_port>;
};
};
- port at 2 {
+ port at 1 {
reg = <1>;
funnel0_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&ptm1_out_port>;
};
};
- port at 3 {
+ port at 2 {
reg = <2>;
funnel0_in_port2: endpoint {
- slave-mode;
remote-endpoint = <&ptm2_out_port>;
};
};
- port at 4 {
+ port at 3 {
reg = <3>;
funnel0_in_port3: endpoint {
- slave-mode;
remote-endpoint = <&ptm3_out_port>;
};
};
@@ -545,11 +561,10 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
- /* funnel output port */
port at 0 {
reg = <0>;
funnel1_out_port0: endpoint {
@@ -557,36 +572,36 @@
<&replicator1_in_port0>;
};
};
+ };
- /* funnel input ports */
- port at 1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
reg = <0>;
funnel1_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&ptm4_out_port>;
};
};
- port at 2 {
+ port at 1 {
reg = <1>;
funnel1_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&ptm5_out_port>;
};
};
- port at 3 {
+ port at 2 {
reg = <2>;
funnel1_in_port2: endpoint {
- slave-mode;
remote-endpoint = <&ptm6_out_port>;
};
};
- port at 4 {
+ port at 3 {
reg = <3>;
funnel1_in_port3: endpoint {
- slave-mode;
remote-endpoint = <&ptm7_out_port>;
};
};
@@ -599,11 +614,10 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
- /* funnel output port */
port at 0 {
reg = <0>;
funnel2_out_port0: endpoint {
@@ -611,36 +625,36 @@
<&replicator2_in_port0>;
};
};
+ };
- /* funnel input ports */
- port at 1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
reg = <0>;
funnel2_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&ptm8_out_port>;
};
};
- port at 2 {
+ port at 1 {
reg = <1>;
funnel2_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&ptm9_out_port>;
};
};
- port at 3 {
+ port at 2 {
reg = <2>;
funnel2_in_port2: endpoint {
- slave-mode;
remote-endpoint = <&ptm10_out_port>;
};
};
- port at 4 {
+ port at 3 {
reg = <3>;
funnel2_in_port3: endpoint {
- slave-mode;
remote-endpoint = <&ptm11_out_port>;
};
};
@@ -653,11 +667,10 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
- /* funnel output port */
port at 0 {
reg = <0>;
funnel3_out_port0: endpoint {
@@ -665,36 +678,36 @@
<&replicator3_in_port0>;
};
};
+ };
- /* funnel input ports */
- port at 1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
reg = <0>;
funnel3_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&ptm12_out_port>;
};
};
- port at 2 {
+ port at 1 {
reg = <1>;
funnel3_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&ptm13_out_port>;
};
};
- port at 3 {
+ port at 2 {
reg = <2>;
funnel3_in_port2: endpoint {
- slave-mode;
remote-endpoint = <&ptm14_out_port>;
};
};
- port at 4 {
+ port at 3 {
reg = <3>;
funnel3_in_port3: endpoint {
- slave-mode;
remote-endpoint = <&ptm15_out_port>;
};
};
@@ -707,50 +720,49 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
- /* funnel output port */
port at 0 {
reg = <0>;
funnel4_out_port0: endpoint {
remote-endpoint = <&tpiu_in_port>;
};
};
+ };
- /* funnel input ports */
- port at 1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
reg = <0>;
funnel4_in_port0: endpoint {
- slave-mode;
remote-endpoint =
<&replicator0_out_port1>;
};
};
- port at 2 {
+ port at 1 {
reg = <1>;
funnel4_in_port1: endpoint {
- slave-mode;
remote-endpoint =
<&replicator1_out_port1>;
};
};
- port at 3 {
+ port at 2 {
reg = <2>;
funnel4_in_port2: endpoint {
- slave-mode;
remote-endpoint =
<&replicator2_out_port1>;
};
};
- port at 4 {
+ port at 3 {
reg = <3>;
funnel4_in_port3: endpoint {
- slave-mode;
remote-endpoint =
<&replicator3_out_port1>;
};
@@ -765,9 +777,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU0>;
- port {
- ptm0_out_port: endpoint {
- remote-endpoint = <&funnel0_in_port0>;
+ out-ports {
+ port {
+ ptm0_out_port: endpoint {
+ remote-endpoint = <&funnel0_in_port0>;
+ };
};
};
};
@@ -779,9 +793,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU1>;
- port {
- ptm1_out_port: endpoint {
- remote-endpoint = <&funnel0_in_port1>;
+ out-ports {
+ port {
+ ptm1_out_port: endpoint {
+ remote-endpoint = <&funnel0_in_port1>;
+ };
};
};
};
@@ -793,9 +809,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU2>;
- port {
- ptm2_out_port: endpoint {
- remote-endpoint = <&funnel0_in_port2>;
+ out-ports {
+ port {
+ ptm2_out_port: endpoint {
+ remote-endpoint = <&funnel0_in_port2>;
+ };
};
};
};
@@ -807,9 +825,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU3>;
- port {
- ptm3_out_port: endpoint {
- remote-endpoint = <&funnel0_in_port3>;
+ out-ports {
+ port {
+ ptm3_out_port: endpoint {
+ remote-endpoint = <&funnel0_in_port3>;
+ };
};
};
};
@@ -821,9 +841,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU4>;
- port {
- ptm4_out_port: endpoint {
- remote-endpoint = <&funnel1_in_port0>;
+ out-ports {
+ port {
+ ptm4_out_port: endpoint {
+ remote-endpoint = <&funnel1_in_port0>;
+ };
};
};
};
@@ -835,9 +857,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU5>;
- port {
- ptm5_out_port: endpoint {
- remote-endpoint = <&funnel1_in_port1>;
+ out-ports {
+ port {
+ ptm5_out_port: endpoint {
+ remote-endpoint = <&funnel1_in_port1>;
+ };
};
};
};
@@ -849,9 +873,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU6>;
- port {
- ptm6_out_port: endpoint {
- remote-endpoint = <&funnel1_in_port2>;
+ out-ports {
+ port {
+ ptm6_out_port: endpoint {
+ remote-endpoint = <&funnel1_in_port2>;
+ };
};
};
};
@@ -863,9 +889,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU7>;
- port {
- ptm7_out_port: endpoint {
- remote-endpoint = <&funnel1_in_port3>;
+ out-ports {
+ port {
+ ptm7_out_port: endpoint {
+ remote-endpoint = <&funnel1_in_port3>;
+ };
};
};
};
@@ -877,9 +905,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU8>;
- port {
- ptm8_out_port: endpoint {
- remote-endpoint = <&funnel2_in_port0>;
+ out-ports {
+ port {
+ ptm8_out_port: endpoint {
+ remote-endpoint = <&funnel2_in_port0>;
+ };
};
};
};
@@ -890,9 +920,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU9>;
- port {
- ptm9_out_port: endpoint {
- remote-endpoint = <&funnel2_in_port1>;
+ out-ports {
+ port {
+ ptm9_out_port: endpoint {
+ remote-endpoint = <&funnel2_in_port1>;
+ };
};
};
};
@@ -904,9 +936,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU10>;
- port {
- ptm10_out_port: endpoint {
- remote-endpoint = <&funnel2_in_port2>;
+ out-ports {
+ port {
+ ptm10_out_port: endpoint {
+ remote-endpoint = <&funnel2_in_port2>;
+ };
};
};
};
@@ -918,9 +952,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU11>;
- port {
- ptm11_out_port: endpoint {
- remote-endpoint = <&funnel2_in_port3>;
+ out-ports {
+ port {
+ ptm11_out_port: endpoint {
+ remote-endpoint = <&funnel2_in_port3>;
+ };
};
};
};
@@ -932,9 +968,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU12>;
- port {
- ptm12_out_port: endpoint {
- remote-endpoint = <&funnel3_in_port0>;
+ out-ports {
+ port {
+ ptm12_out_port: endpoint {
+ remote-endpoint = <&funnel3_in_port0>;
+ };
};
};
};
@@ -946,9 +984,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU13>;
- port {
- ptm13_out_port: endpoint {
- remote-endpoint = <&funnel3_in_port1>;
+ out-ports {
+ port {
+ ptm13_out_port: endpoint {
+ remote-endpoint = <&funnel3_in_port1>;
+ };
};
};
};
@@ -960,9 +1000,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU14>;
- port {
- ptm14_out_port: endpoint {
- remote-endpoint = <&funnel3_in_port2>;
+ out-ports {
+ port {
+ ptm14_out_port: endpoint {
+ remote-endpoint = <&funnel3_in_port2>;
+ };
};
};
};
@@ -974,9 +1016,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU15>;
- port {
- ptm15_out_port: endpoint {
- remote-endpoint = <&funnel3_in_port3>;
+ out-ports {
+ port {
+ ptm15_out_port: endpoint {
+ remote-endpoint = <&funnel3_in_port3>;
+ };
};
};
};
--
2.7.4
^ permalink raw reply related [flat|nested] 51+ messages in thread
* [PATCH 06/11] dts: arm: imx7{d,s}: Update coresight binding for hardware ports
2018-09-11 10:17 ` Suzuki K Poulose
@ 2018-09-11 10:17 ` Suzuki K Poulose
-1 siblings, 0 replies; 51+ messages in thread
From: Suzuki K Poulose @ 2018-09-11 10:17 UTC (permalink / raw)
To: linux-arm-kernel
Cc: linux-kernel, robh, frowand.list, devicetree, mathieu.poirier,
arm, sudeep.holla, Suzuki K Poulose, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam
Switch to the updated coresight bindings.
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
---
arch/arm/boot/dts/imx7d.dtsi | 11 ++++---
arch/arm/boot/dts/imx7s.dtsi | 78 ++++++++++++++++++++++++++------------------
2 files changed, 53 insertions(+), 36 deletions(-)
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index 7cbc2ff..4ced17c 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -63,9 +63,11 @@
clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
clock-names = "apb_pclk";
- port {
- etm1_out_port: endpoint {
- remote-endpoint = <&ca_funnel_in_port1>;
+ out-ports {
+ port {
+ etm1_out_port: endpoint {
+ remote-endpoint = <&ca_funnel_in_port1>;
+ };
};
};
};
@@ -148,11 +150,10 @@
};
};
-&ca_funnel_ports {
+&ca_funnel_in_ports {
port@1 {
reg = <1>;
ca_funnel_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&etm1_out_port>;
};
};
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index a052198..9176885 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -106,7 +106,7 @@
*/
compatible = "arm,coresight-replicator";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
/* replicator output ports */
@@ -123,12 +123,15 @@
remote-endpoint = <&etr_in_port>;
};
};
+ };
- /* replicator input port */
- port@2 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
replicator_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&etf_out_port>;
};
};
@@ -168,28 +171,31 @@
clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
clock-names = "apb_pclk";
- ca_funnel_ports: ports {
+ ca_funnel_in_ports: in-ports {
#address-cells = <1>;
#size-cells = <0>;
- /* funnel input ports */
port@0 {
reg = <0>;
ca_funnel_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&etm0_out_port>;
};
};
- /* funnel output port */
- port@2 {
+ /* the other input ports are not connect to anything */
+ };
+
+ out-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
ca_funnel_out_port0: endpoint {
remote-endpoint = <&hugo_funnel_in_port0>;
};
};
- /* the other input ports are not connect to anything */
};
};
@@ -200,9 +206,11 @@
clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
clock-names = "apb_pclk";
- port {
- etm0_out_port: endpoint {
- remote-endpoint = <&ca_funnel_in_port0>;
+ out-ports {
+ port {
+ etm0_out_port: endpoint {
+ remote-endpoint = <&ca_funnel_in_port0>;
+ };
};
};
};
@@ -213,15 +221,13 @@
clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
clock-names = "apb_pclk";
- ports {
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
- /* funnel input ports */
port@0 {
reg = <0>;
hugo_funnel_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&ca_funnel_out_port0>;
};
};
@@ -229,18 +235,22 @@
port@1 {
reg = <1>;
hugo_funnel_in_port1: endpoint {
- slave-mode; /* M4 input */
+ /* M4 input */
};
};
+ /* the other input ports are not connect to anything */
+ };
- port@2 {
+ out-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
hugo_funnel_out_port0: endpoint {
remote-endpoint = <&etf_in_port>;
};
};
-
- /* the other input ports are not connect to anything */
};
};
@@ -250,19 +260,23 @@
clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
clock-names = "apb_pclk";
- ports {
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
etf_in_port: endpoint {
- slave-mode;
remote-endpoint = <&hugo_funnel_out_port0>;
};
};
+ };
- port@1 {
+ out-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
etf_out_port: endpoint {
remote-endpoint = <&replicator_in_port0>;
@@ -277,10 +291,11 @@
clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
clock-names = "apb_pclk";
- port {
- etr_in_port: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out_port1>;
+ in-ports {
+ port {
+ etr_in_port: endpoint {
+ remote-endpoint = <&replicator_out_port1>;
+ };
};
};
};
@@ -291,10 +306,11 @@
clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
clock-names = "apb_pclk";
- port {
- tpiu_in_port: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out_port0>;
+ in-ports {
+ port {
+ tpiu_in_port: endpoint {
+ remote-endpoint = <&replicator_out_port0>;
+ };
};
};
};
--
2.7.4
^ permalink raw reply related [flat|nested] 51+ messages in thread* [PATCH 06/11] dts: arm: imx7{d, s}: Update coresight binding for hardware ports
@ 2018-09-11 10:17 ` Suzuki K Poulose
0 siblings, 0 replies; 51+ messages in thread
From: Suzuki K Poulose @ 2018-09-11 10:17 UTC (permalink / raw)
To: linux-arm-kernel
Switch to the updated coresight bindings.
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
---
arch/arm/boot/dts/imx7d.dtsi | 11 ++++---
arch/arm/boot/dts/imx7s.dtsi | 78 ++++++++++++++++++++++++++------------------
2 files changed, 53 insertions(+), 36 deletions(-)
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index 7cbc2ff..4ced17c 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -63,9 +63,11 @@
clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
clock-names = "apb_pclk";
- port {
- etm1_out_port: endpoint {
- remote-endpoint = <&ca_funnel_in_port1>;
+ out-ports {
+ port {
+ etm1_out_port: endpoint {
+ remote-endpoint = <&ca_funnel_in_port1>;
+ };
};
};
};
@@ -148,11 +150,10 @@
};
};
-&ca_funnel_ports {
+&ca_funnel_in_ports {
port at 1 {
reg = <1>;
ca_funnel_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&etm1_out_port>;
};
};
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index a052198..9176885 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -106,7 +106,7 @@
*/
compatible = "arm,coresight-replicator";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
/* replicator output ports */
@@ -123,12 +123,15 @@
remote-endpoint = <&etr_in_port>;
};
};
+ };
- /* replicator input port */
- port at 2 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
reg = <0>;
replicator_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&etf_out_port>;
};
};
@@ -168,28 +171,31 @@
clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
clock-names = "apb_pclk";
- ca_funnel_ports: ports {
+ ca_funnel_in_ports: in-ports {
#address-cells = <1>;
#size-cells = <0>;
- /* funnel input ports */
port at 0 {
reg = <0>;
ca_funnel_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&etm0_out_port>;
};
};
- /* funnel output port */
- port at 2 {
+ /* the other input ports are not connect to anything */
+ };
+
+ out-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
reg = <0>;
ca_funnel_out_port0: endpoint {
remote-endpoint = <&hugo_funnel_in_port0>;
};
};
- /* the other input ports are not connect to anything */
};
};
@@ -200,9 +206,11 @@
clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
clock-names = "apb_pclk";
- port {
- etm0_out_port: endpoint {
- remote-endpoint = <&ca_funnel_in_port0>;
+ out-ports {
+ port {
+ etm0_out_port: endpoint {
+ remote-endpoint = <&ca_funnel_in_port0>;
+ };
};
};
};
@@ -213,15 +221,13 @@
clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
clock-names = "apb_pclk";
- ports {
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
- /* funnel input ports */
port at 0 {
reg = <0>;
hugo_funnel_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&ca_funnel_out_port0>;
};
};
@@ -229,18 +235,22 @@
port at 1 {
reg = <1>;
hugo_funnel_in_port1: endpoint {
- slave-mode; /* M4 input */
+ /* M4 input */
};
};
+ /* the other input ports are not connect to anything */
+ };
- port at 2 {
+ out-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
reg = <0>;
hugo_funnel_out_port0: endpoint {
remote-endpoint = <&etf_in_port>;
};
};
-
- /* the other input ports are not connect to anything */
};
};
@@ -250,19 +260,23 @@
clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
clock-names = "apb_pclk";
- ports {
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
port at 0 {
reg = <0>;
etf_in_port: endpoint {
- slave-mode;
remote-endpoint = <&hugo_funnel_out_port0>;
};
};
+ };
- port at 1 {
+ out-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
reg = <0>;
etf_out_port: endpoint {
remote-endpoint = <&replicator_in_port0>;
@@ -277,10 +291,11 @@
clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
clock-names = "apb_pclk";
- port {
- etr_in_port: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out_port1>;
+ in-ports {
+ port {
+ etr_in_port: endpoint {
+ remote-endpoint = <&replicator_out_port1>;
+ };
};
};
};
@@ -291,10 +306,11 @@
clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
clock-names = "apb_pclk";
- port {
- tpiu_in_port: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out_port0>;
+ in-ports {
+ port {
+ tpiu_in_port: endpoint {
+ remote-endpoint = <&replicator_out_port0>;
+ };
};
};
};
--
2.7.4
^ permalink raw reply related [flat|nested] 51+ messages in thread* Re: [PATCH 06/11] dts: arm: imx7{d,s}: Update coresight binding for hardware ports
2018-09-11 10:17 ` [PATCH 06/11] dts: arm: imx7{d, s}: " Suzuki K Poulose
@ 2018-09-12 2:21 ` Shawn Guo
-1 siblings, 0 replies; 51+ messages in thread
From: Shawn Guo @ 2018-09-12 2:21 UTC (permalink / raw)
To: Suzuki K Poulose
Cc: linux-arm-kernel, linux-kernel, robh, frowand.list, devicetree,
mathieu.poirier, arm, sudeep.holla, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam
On Tue, Sep 11, 2018 at 11:17:07AM +0100, Suzuki K Poulose wrote:
> Switch to the updated coresight bindings.
>
> Cc: Shawn Guo <shawnguo@kernel.org>
> Cc: Sascha Hauer <s.hauer@pengutronix.de>
> Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
> Cc: Fabio Estevam <fabio.estevam@nxp.com>
> Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
As per the convention we use for subject prefix, I suggest you use
'ARM: dts: imx7: ...'
Shawn
> ---
> arch/arm/boot/dts/imx7d.dtsi | 11 ++++---
> arch/arm/boot/dts/imx7s.dtsi | 78 ++++++++++++++++++++++++++------------------
> 2 files changed, 53 insertions(+), 36 deletions(-)
>
> diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
> index 7cbc2ff..4ced17c 100644
> --- a/arch/arm/boot/dts/imx7d.dtsi
> +++ b/arch/arm/boot/dts/imx7d.dtsi
> @@ -63,9 +63,11 @@
> clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
> clock-names = "apb_pclk";
>
> - port {
> - etm1_out_port: endpoint {
> - remote-endpoint = <&ca_funnel_in_port1>;
> + out-ports {
> + port {
> + etm1_out_port: endpoint {
> + remote-endpoint = <&ca_funnel_in_port1>;
> + };
> };
> };
> };
> @@ -148,11 +150,10 @@
> };
> };
>
> -&ca_funnel_ports {
> +&ca_funnel_in_ports {
> port@1 {
> reg = <1>;
> ca_funnel_in_port1: endpoint {
> - slave-mode;
> remote-endpoint = <&etm1_out_port>;
> };
> };
> diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
> index a052198..9176885 100644
> --- a/arch/arm/boot/dts/imx7s.dtsi
> +++ b/arch/arm/boot/dts/imx7s.dtsi
> @@ -106,7 +106,7 @@
> */
> compatible = "arm,coresight-replicator";
>
> - ports {
> + out-ports {
> #address-cells = <1>;
> #size-cells = <0>;
> /* replicator output ports */
> @@ -123,12 +123,15 @@
> remote-endpoint = <&etr_in_port>;
> };
> };
> + };
>
> - /* replicator input port */
> - port@2 {
> + in-ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> reg = <0>;
> replicator_in_port0: endpoint {
> - slave-mode;
> remote-endpoint = <&etf_out_port>;
> };
> };
> @@ -168,28 +171,31 @@
> clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
> clock-names = "apb_pclk";
>
> - ca_funnel_ports: ports {
> + ca_funnel_in_ports: in-ports {
> #address-cells = <1>;
> #size-cells = <0>;
>
> - /* funnel input ports */
> port@0 {
> reg = <0>;
> ca_funnel_in_port0: endpoint {
> - slave-mode;
> remote-endpoint = <&etm0_out_port>;
> };
> };
>
> - /* funnel output port */
> - port@2 {
> + /* the other input ports are not connect to anything */
> + };
> +
> + out-ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> reg = <0>;
> ca_funnel_out_port0: endpoint {
> remote-endpoint = <&hugo_funnel_in_port0>;
> };
> };
>
> - /* the other input ports are not connect to anything */
> };
> };
>
> @@ -200,9 +206,11 @@
> clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
> clock-names = "apb_pclk";
>
> - port {
> - etm0_out_port: endpoint {
> - remote-endpoint = <&ca_funnel_in_port0>;
> + out-ports {
> + port {
> + etm0_out_port: endpoint {
> + remote-endpoint = <&ca_funnel_in_port0>;
> + };
> };
> };
> };
> @@ -213,15 +221,13 @@
> clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
> clock-names = "apb_pclk";
>
> - ports {
> + in-ports {
> #address-cells = <1>;
> #size-cells = <0>;
>
> - /* funnel input ports */
> port@0 {
> reg = <0>;
> hugo_funnel_in_port0: endpoint {
> - slave-mode;
> remote-endpoint = <&ca_funnel_out_port0>;
> };
> };
> @@ -229,18 +235,22 @@
> port@1 {
> reg = <1>;
> hugo_funnel_in_port1: endpoint {
> - slave-mode; /* M4 input */
> + /* M4 input */
> };
> };
> + /* the other input ports are not connect to anything */
> + };
>
> - port@2 {
> + out-ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> reg = <0>;
> hugo_funnel_out_port0: endpoint {
> remote-endpoint = <&etf_in_port>;
> };
> };
> -
> - /* the other input ports are not connect to anything */
> };
> };
>
> @@ -250,19 +260,23 @@
> clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
> clock-names = "apb_pclk";
>
> - ports {
> + in-ports {
> #address-cells = <1>;
> #size-cells = <0>;
>
> port@0 {
> reg = <0>;
> etf_in_port: endpoint {
> - slave-mode;
> remote-endpoint = <&hugo_funnel_out_port0>;
> };
> };
> + };
>
> - port@1 {
> + out-ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> reg = <0>;
> etf_out_port: endpoint {
> remote-endpoint = <&replicator_in_port0>;
> @@ -277,10 +291,11 @@
> clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
> clock-names = "apb_pclk";
>
> - port {
> - etr_in_port: endpoint {
> - slave-mode;
> - remote-endpoint = <&replicator_out_port1>;
> + in-ports {
> + port {
> + etr_in_port: endpoint {
> + remote-endpoint = <&replicator_out_port1>;
> + };
> };
> };
> };
> @@ -291,10 +306,11 @@
> clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
> clock-names = "apb_pclk";
>
> - port {
> - tpiu_in_port: endpoint {
> - slave-mode;
> - remote-endpoint = <&replicator_out_port0>;
> + in-ports {
> + port {
> + tpiu_in_port: endpoint {
> + remote-endpoint = <&replicator_out_port0>;
> + };
> };
> };
> };
> --
> 2.7.4
>
^ permalink raw reply [flat|nested] 51+ messages in thread* [PATCH 06/11] dts: arm: imx7{d,s}: Update coresight binding for hardware ports
@ 2018-09-12 2:21 ` Shawn Guo
0 siblings, 0 replies; 51+ messages in thread
From: Shawn Guo @ 2018-09-12 2:21 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Sep 11, 2018 at 11:17:07AM +0100, Suzuki K Poulose wrote:
> Switch to the updated coresight bindings.
>
> Cc: Shawn Guo <shawnguo@kernel.org>
> Cc: Sascha Hauer <s.hauer@pengutronix.de>
> Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
> Cc: Fabio Estevam <fabio.estevam@nxp.com>
> Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
As per the convention we use for subject prefix, I suggest you use
'ARM: dts: imx7: ...'
Shawn
> ---
> arch/arm/boot/dts/imx7d.dtsi | 11 ++++---
> arch/arm/boot/dts/imx7s.dtsi | 78 ++++++++++++++++++++++++++------------------
> 2 files changed, 53 insertions(+), 36 deletions(-)
>
> diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
> index 7cbc2ff..4ced17c 100644
> --- a/arch/arm/boot/dts/imx7d.dtsi
> +++ b/arch/arm/boot/dts/imx7d.dtsi
> @@ -63,9 +63,11 @@
> clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
> clock-names = "apb_pclk";
>
> - port {
> - etm1_out_port: endpoint {
> - remote-endpoint = <&ca_funnel_in_port1>;
> + out-ports {
> + port {
> + etm1_out_port: endpoint {
> + remote-endpoint = <&ca_funnel_in_port1>;
> + };
> };
> };
> };
> @@ -148,11 +150,10 @@
> };
> };
>
> -&ca_funnel_ports {
> +&ca_funnel_in_ports {
> port at 1 {
> reg = <1>;
> ca_funnel_in_port1: endpoint {
> - slave-mode;
> remote-endpoint = <&etm1_out_port>;
> };
> };
> diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
> index a052198..9176885 100644
> --- a/arch/arm/boot/dts/imx7s.dtsi
> +++ b/arch/arm/boot/dts/imx7s.dtsi
> @@ -106,7 +106,7 @@
> */
> compatible = "arm,coresight-replicator";
>
> - ports {
> + out-ports {
> #address-cells = <1>;
> #size-cells = <0>;
> /* replicator output ports */
> @@ -123,12 +123,15 @@
> remote-endpoint = <&etr_in_port>;
> };
> };
> + };
>
> - /* replicator input port */
> - port at 2 {
> + in-ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port at 0 {
> reg = <0>;
> replicator_in_port0: endpoint {
> - slave-mode;
> remote-endpoint = <&etf_out_port>;
> };
> };
> @@ -168,28 +171,31 @@
> clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
> clock-names = "apb_pclk";
>
> - ca_funnel_ports: ports {
> + ca_funnel_in_ports: in-ports {
> #address-cells = <1>;
> #size-cells = <0>;
>
> - /* funnel input ports */
> port at 0 {
> reg = <0>;
> ca_funnel_in_port0: endpoint {
> - slave-mode;
> remote-endpoint = <&etm0_out_port>;
> };
> };
>
> - /* funnel output port */
> - port at 2 {
> + /* the other input ports are not connect to anything */
> + };
> +
> + out-ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port at 0 {
> reg = <0>;
> ca_funnel_out_port0: endpoint {
> remote-endpoint = <&hugo_funnel_in_port0>;
> };
> };
>
> - /* the other input ports are not connect to anything */
> };
> };
>
> @@ -200,9 +206,11 @@
> clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
> clock-names = "apb_pclk";
>
> - port {
> - etm0_out_port: endpoint {
> - remote-endpoint = <&ca_funnel_in_port0>;
> + out-ports {
> + port {
> + etm0_out_port: endpoint {
> + remote-endpoint = <&ca_funnel_in_port0>;
> + };
> };
> };
> };
> @@ -213,15 +221,13 @@
> clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
> clock-names = "apb_pclk";
>
> - ports {
> + in-ports {
> #address-cells = <1>;
> #size-cells = <0>;
>
> - /* funnel input ports */
> port at 0 {
> reg = <0>;
> hugo_funnel_in_port0: endpoint {
> - slave-mode;
> remote-endpoint = <&ca_funnel_out_port0>;
> };
> };
> @@ -229,18 +235,22 @@
> port at 1 {
> reg = <1>;
> hugo_funnel_in_port1: endpoint {
> - slave-mode; /* M4 input */
> + /* M4 input */
> };
> };
> + /* the other input ports are not connect to anything */
> + };
>
> - port at 2 {
> + out-ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port at 0 {
> reg = <0>;
> hugo_funnel_out_port0: endpoint {
> remote-endpoint = <&etf_in_port>;
> };
> };
> -
> - /* the other input ports are not connect to anything */
> };
> };
>
> @@ -250,19 +260,23 @@
> clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
> clock-names = "apb_pclk";
>
> - ports {
> + in-ports {
> #address-cells = <1>;
> #size-cells = <0>;
>
> port at 0 {
> reg = <0>;
> etf_in_port: endpoint {
> - slave-mode;
> remote-endpoint = <&hugo_funnel_out_port0>;
> };
> };
> + };
>
> - port at 1 {
> + out-ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port at 0 {
> reg = <0>;
> etf_out_port: endpoint {
> remote-endpoint = <&replicator_in_port0>;
> @@ -277,10 +291,11 @@
> clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
> clock-names = "apb_pclk";
>
> - port {
> - etr_in_port: endpoint {
> - slave-mode;
> - remote-endpoint = <&replicator_out_port1>;
> + in-ports {
> + port {
> + etr_in_port: endpoint {
> + remote-endpoint = <&replicator_out_port1>;
> + };
> };
> };
> };
> @@ -291,10 +306,11 @@
> clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
> clock-names = "apb_pclk";
>
> - port {
> - tpiu_in_port: endpoint {
> - slave-mode;
> - remote-endpoint = <&replicator_out_port0>;
> + in-ports {
> + port {
> + tpiu_in_port: endpoint {
> + remote-endpoint = <&replicator_out_port0>;
> + };
> };
> };
> };
> --
> 2.7.4
>
^ permalink raw reply [flat|nested] 51+ messages in thread* Re: [PATCH 06/11] dts: arm: imx7{d,s}: Update coresight binding for hardware ports
2018-09-12 2:21 ` Shawn Guo
@ 2018-09-12 8:28 ` Suzuki K Poulose
-1 siblings, 0 replies; 51+ messages in thread
From: Suzuki K Poulose @ 2018-09-12 8:28 UTC (permalink / raw)
To: Shawn Guo
Cc: linux-arm-kernel, linux-kernel, robh, frowand.list, devicetree,
mathieu.poirier, arm, sudeep.holla, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam
On 12/09/18 03:21, Shawn Guo wrote:
> On Tue, Sep 11, 2018 at 11:17:07AM +0100, Suzuki K Poulose wrote:
>> Switch to the updated coresight bindings.
>>
>> Cc: Shawn Guo <shawnguo@kernel.org>
>> Cc: Sascha Hauer <s.hauer@pengutronix.de>
>> Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
>> Cc: Fabio Estevam <fabio.estevam@nxp.com>
>> Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
>> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
>
> As per the convention we use for subject prefix, I suggest you use
>
> 'ARM: dts: imx7: ...'
Shawn
Thanks for the suggestion. As I mentioned in the reply to the cover letter, I
will update the series with this addressed.
Thanks
Suzuki
^ permalink raw reply [flat|nested] 51+ messages in thread* [PATCH 06/11] dts: arm: imx7{d,s}: Update coresight binding for hardware ports
@ 2018-09-12 8:28 ` Suzuki K Poulose
0 siblings, 0 replies; 51+ messages in thread
From: Suzuki K Poulose @ 2018-09-12 8:28 UTC (permalink / raw)
To: linux-arm-kernel
On 12/09/18 03:21, Shawn Guo wrote:
> On Tue, Sep 11, 2018 at 11:17:07AM +0100, Suzuki K Poulose wrote:
>> Switch to the updated coresight bindings.
>>
>> Cc: Shawn Guo <shawnguo@kernel.org>
>> Cc: Sascha Hauer <s.hauer@pengutronix.de>
>> Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
>> Cc: Fabio Estevam <fabio.estevam@nxp.com>
>> Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
>> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
>
> As per the convention we use for subject prefix, I suggest you use
>
> 'ARM: dts: imx7: ...'
Shawn
Thanks for the suggestion. As I mentioned in the reply to the cover letter, I
will update the series with this addressed.
Thanks
Suzuki
^ permalink raw reply [flat|nested] 51+ messages in thread
* [PATCH 07/11] dts: arm: omap: Update coresight bindings for hardware ports
2018-09-11 10:17 ` Suzuki K Poulose
@ 2018-09-11 10:17 ` Suzuki K Poulose
-1 siblings, 0 replies; 51+ messages in thread
From: Suzuki K Poulose @ 2018-09-11 10:17 UTC (permalink / raw)
To: linux-arm-kernel
Cc: linux-kernel, robh, frowand.list, devicetree, mathieu.poirier,
arm, sudeep.holla, Suzuki K Poulose, linux-omap,
Benoît Cousson, Tony Lindgren
Switch to the new coresight bindings for hardware ports
Cc: linux-omap@vger.kernel.org
Cc: "Benoît Cousson" <bcousson@baylibre.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
---
arch/arm/boot/dts/omap3-beagle-xm.dts | 17 ++++++++++-------
arch/arm/boot/dts/omap3-beagle.dts | 17 ++++++++++-------
2 files changed, 20 insertions(+), 14 deletions(-)
diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
index d80587d..9985ee2 100644
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -160,10 +160,11 @@
clocks = <&emu_src_ck>;
clock-names = "apb_pclk";
- port {
- etb_in: endpoint {
- slave-mode;
- remote-endpoint = <&etm_out>;
+ in-ports {
+ port {
+ etb_in: endpoint {
+ remote-endpoint = <&etm_out>;
+ };
};
};
};
@@ -174,9 +175,11 @@
clocks = <&emu_src_ck>;
clock-names = "apb_pclk";
- port {
- etm_out: endpoint {
- remote-endpoint = <&etb_in>;
+ out-ports {
+ port {
+ etm_out: endpoint {
+ remote-endpoint = <&etb_in>;
+ };
};
};
};
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index 3ca8991..91bb50a 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -147,10 +147,11 @@
clocks = <&emu_src_ck>;
clock-names = "apb_pclk";
- port {
- etb_in: endpoint {
- slave-mode;
- remote-endpoint = <&etm_out>;
+ in-ports {
+ port {
+ etb_in: endpoint {
+ remote-endpoint = <&etm_out>;
+ };
};
};
};
@@ -161,9 +162,11 @@
clocks = <&emu_src_ck>;
clock-names = "apb_pclk";
- port {
- etm_out: endpoint {
- remote-endpoint = <&etb_in>;
+ out-ports {
+ port {
+ etm_out: endpoint {
+ remote-endpoint = <&etb_in>;
+ };
};
};
};
--
2.7.4
^ permalink raw reply related [flat|nested] 51+ messages in thread* [PATCH 07/11] dts: arm: omap: Update coresight bindings for hardware ports
@ 2018-09-11 10:17 ` Suzuki K Poulose
0 siblings, 0 replies; 51+ messages in thread
From: Suzuki K Poulose @ 2018-09-11 10:17 UTC (permalink / raw)
To: linux-arm-kernel
Switch to the new coresight bindings for hardware ports
Cc: linux-omap at vger.kernel.org
Cc: "Beno?t Cousson" <bcousson@baylibre.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
---
arch/arm/boot/dts/omap3-beagle-xm.dts | 17 ++++++++++-------
arch/arm/boot/dts/omap3-beagle.dts | 17 ++++++++++-------
2 files changed, 20 insertions(+), 14 deletions(-)
diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
index d80587d..9985ee2 100644
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -160,10 +160,11 @@
clocks = <&emu_src_ck>;
clock-names = "apb_pclk";
- port {
- etb_in: endpoint {
- slave-mode;
- remote-endpoint = <&etm_out>;
+ in-ports {
+ port {
+ etb_in: endpoint {
+ remote-endpoint = <&etm_out>;
+ };
};
};
};
@@ -174,9 +175,11 @@
clocks = <&emu_src_ck>;
clock-names = "apb_pclk";
- port {
- etm_out: endpoint {
- remote-endpoint = <&etb_in>;
+ out-ports {
+ port {
+ etm_out: endpoint {
+ remote-endpoint = <&etb_in>;
+ };
};
};
};
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index 3ca8991..91bb50a 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -147,10 +147,11 @@
clocks = <&emu_src_ck>;
clock-names = "apb_pclk";
- port {
- etb_in: endpoint {
- slave-mode;
- remote-endpoint = <&etm_out>;
+ in-ports {
+ port {
+ etb_in: endpoint {
+ remote-endpoint = <&etm_out>;
+ };
};
};
};
@@ -161,9 +162,11 @@
clocks = <&emu_src_ck>;
clock-names = "apb_pclk";
- port {
- etm_out: endpoint {
- remote-endpoint = <&etb_in>;
+ out-ports {
+ port {
+ etm_out: endpoint {
+ remote-endpoint = <&etb_in>;
+ };
};
};
};
--
2.7.4
^ permalink raw reply related [flat|nested] 51+ messages in thread
* [PATCH 08/11] dts: arm: qcom: Update coresight bindings for hardware ports
2018-09-11 10:17 ` Suzuki K Poulose
@ 2018-09-11 10:17 ` Suzuki K Poulose
-1 siblings, 0 replies; 51+ messages in thread
From: Suzuki K Poulose @ 2018-09-11 10:17 UTC (permalink / raw)
To: linux-arm-kernel
Cc: linux-kernel, robh, frowand.list, devicetree, mathieu.poirier,
arm, sudeep.holla, Suzuki K Poulose, Andy Gross, David Brown
Switch to the new hardware port bindings for coresight
Cc: Andy Gross <andy.gross@linaro.org>
Cc: David Brown <david.brown@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
---
arch/arm/boot/dts/qcom-apq8064.dtsi | 75 +++++++++++++++----------
arch/arm/boot/dts/qcom-msm8974.dtsi | 108 +++++++++++++++++++++++-------------
2 files changed, 116 insertions(+), 67 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 4a99c92..0a1c598 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -1611,10 +1611,11 @@
clocks = <&rpmcc RPM_QDSS_CLK>;
clock-names = "apb_pclk";
- port {
- etb_in: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out0>;
+ in-ports {
+ port {
+ etb_in: endpoint {
+ remote-endpoint = <&replicator_out0>;
+ };
};
};
};
@@ -1626,10 +1627,11 @@
clocks = <&rpmcc RPM_QDSS_CLK>;
clock-names = "apb_pclk";
- port {
- tpiu_in: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out1>;
+ in-ports {
+ port {
+ tpiu_in: endpoint {
+ remote-endpoint = <&replicator_out1>;
+ };
};
};
};
@@ -1640,7 +1642,7 @@
clocks = <&rpmcc RPM_QDSS_CLK>;
clock-names = "apb_pclk";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -1656,10 +1658,15 @@
remote-endpoint = <&tpiu_in>;
};
};
- port@2 {
+ };
+
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
replicator_in: endpoint {
- slave-mode;
remote-endpoint = <&funnel_out>;
};
};
@@ -1673,7 +1680,7 @@
clocks = <&rpmcc RPM_QDSS_CLK>;
clock-names = "apb_pclk";
- ports {
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -1687,32 +1694,34 @@
port@0 {
reg = <0>;
funnel_in0: endpoint {
- slave-mode;
remote-endpoint = <&etm0_out>;
};
};
port@1 {
reg = <1>;
funnel_in1: endpoint {
- slave-mode;
remote-endpoint = <&etm1_out>;
};
};
port@4 {
reg = <4>;
funnel_in4: endpoint {
- slave-mode;
remote-endpoint = <&etm2_out>;
};
};
port@5 {
reg = <5>;
funnel_in5: endpoint {
- slave-mode;
remote-endpoint = <&etm3_out>;
};
};
- port@8 {
+ };
+
+ out-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
funnel_out: endpoint {
remote-endpoint = <&replicator_in>;
@@ -1730,9 +1739,11 @@
cpu = <&CPU0>;
- port {
- etm0_out: endpoint {
- remote-endpoint = <&funnel_in0>;
+ out-ports {
+ port {
+ etm0_out: endpoint {
+ remote-endpoint = <&funnel_in0>;
+ };
};
};
};
@@ -1746,9 +1757,11 @@
cpu = <&CPU1>;
- port {
- etm1_out: endpoint {
- remote-endpoint = <&funnel_in1>;
+ out-ports {
+ port {
+ etm1_out: endpoint {
+ remote-endpoint = <&funnel_in1>;
+ };
};
};
};
@@ -1762,9 +1775,11 @@
cpu = <&CPU2>;
- port {
- etm2_out: endpoint {
- remote-endpoint = <&funnel_in4>;
+ out-ports {
+ port {
+ etm2_out: endpoint {
+ remote-endpoint = <&funnel_in4>;
+ };
};
};
};
@@ -1778,9 +1793,11 @@
cpu = <&CPU3>;
- port {
- etm3_out: endpoint {
- remote-endpoint = <&funnel_in5>;
+ out-ports {
+ port {
+ etm3_out: endpoint {
+ remote-endpoint = <&funnel_in5>;
+ };
};
};
};
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index d9019a4..37aac0b 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -770,10 +770,11 @@
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- port {
- etr_in: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out0>;
+ in-ports {
+ port {
+ etr_in: endpoint {
+ remote-endpoint = <&replicator_out0>;
+ };
};
};
};
@@ -785,10 +786,11 @@
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- port {
- tpiu_in: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out1>;
+ in-ports {
+ port {
+ tpiu_in: endpoint {
+ remote-endpoint = <&replicator_out1>;
+ };
};
};
};
@@ -800,7 +802,7 @@
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -816,10 +818,15 @@
remote-endpoint = <&tpiu_in>;
};
};
- port@2 {
+ };
+
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
replicator_in: endpoint {
- slave-mode;
remote-endpoint = <&etf_out>;
};
};
@@ -833,7 +840,7 @@
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -843,10 +850,15 @@
remote-endpoint = <&replicator_in>;
};
};
- port@1 {
+ };
+
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
etf_in: endpoint {
- slave-mode;
remote-endpoint = <&merger_out>;
};
};
@@ -860,7 +872,7 @@
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- ports {
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -873,11 +885,16 @@
port@1 {
reg = <1>;
merger_in1: endpoint {
- slave-mode;
remote-endpoint = <&funnel1_out>;
};
};
- port@8 {
+ };
+
+ out-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
merger_out: endpoint {
remote-endpoint = <&etf_in>;
@@ -893,7 +910,7 @@
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- ports {
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -910,11 +927,16 @@
port@5 {
reg = <5>;
funnel1_in5: endpoint {
- slave-mode;
remote-endpoint = <&kpss_out>;
};
};
- port@8 {
+ };
+
+ out-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
funnel1_out: endpoint {
remote-endpoint = <&merger_in1>;
@@ -930,39 +952,41 @@
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- ports {
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
kpss_in0: endpoint {
- slave-mode;
remote-endpoint = <&etm0_out>;
};
};
port@1 {
reg = <1>;
kpss_in1: endpoint {
- slave-mode;
remote-endpoint = <&etm1_out>;
};
};
port@2 {
reg = <2>;
kpss_in2: endpoint {
- slave-mode;
remote-endpoint = <&etm2_out>;
};
};
port@3 {
reg = <3>;
kpss_in3: endpoint {
- slave-mode;
remote-endpoint = <&etm3_out>;
};
};
- port@8 {
+ };
+
+ out-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
kpss_out: endpoint {
remote-endpoint = <&funnel1_in5>;
@@ -980,9 +1004,11 @@
cpu = <&CPU0>;
- port {
- etm0_out: endpoint {
- remote-endpoint = <&kpss_in0>;
+ out-ports {
+ port {
+ etm0_out: endpoint {
+ remote-endpoint = <&kpss_in0>;
+ };
};
};
};
@@ -996,9 +1022,11 @@
cpu = <&CPU1>;
- port {
- etm1_out: endpoint {
- remote-endpoint = <&kpss_in1>;
+ out-ports {
+ port {
+ etm1_out: endpoint {
+ remote-endpoint = <&kpss_in1>;
+ };
};
};
};
@@ -1012,9 +1040,11 @@
cpu = <&CPU2>;
- port {
- etm2_out: endpoint {
- remote-endpoint = <&kpss_in2>;
+ out-ports {
+ port {
+ etm2_out: endpoint {
+ remote-endpoint = <&kpss_in2>;
+ };
};
};
};
@@ -1028,9 +1058,11 @@
cpu = <&CPU3>;
- port {
- etm3_out: endpoint {
- remote-endpoint = <&kpss_in3>;
+ out-ports {
+ port {
+ etm3_out: endpoint {
+ remote-endpoint = <&kpss_in3>;
+ };
};
};
};
--
2.7.4
^ permalink raw reply related [flat|nested] 51+ messages in thread* [PATCH 08/11] dts: arm: qcom: Update coresight bindings for hardware ports
@ 2018-09-11 10:17 ` Suzuki K Poulose
0 siblings, 0 replies; 51+ messages in thread
From: Suzuki K Poulose @ 2018-09-11 10:17 UTC (permalink / raw)
To: linux-arm-kernel
Switch to the new hardware port bindings for coresight
Cc: Andy Gross <andy.gross@linaro.org>
Cc: David Brown <david.brown@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
---
arch/arm/boot/dts/qcom-apq8064.dtsi | 75 +++++++++++++++----------
arch/arm/boot/dts/qcom-msm8974.dtsi | 108 +++++++++++++++++++++++-------------
2 files changed, 116 insertions(+), 67 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 4a99c92..0a1c598 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -1611,10 +1611,11 @@
clocks = <&rpmcc RPM_QDSS_CLK>;
clock-names = "apb_pclk";
- port {
- etb_in: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out0>;
+ in-ports {
+ port {
+ etb_in: endpoint {
+ remote-endpoint = <&replicator_out0>;
+ };
};
};
};
@@ -1626,10 +1627,11 @@
clocks = <&rpmcc RPM_QDSS_CLK>;
clock-names = "apb_pclk";
- port {
- tpiu_in: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out1>;
+ in-ports {
+ port {
+ tpiu_in: endpoint {
+ remote-endpoint = <&replicator_out1>;
+ };
};
};
};
@@ -1640,7 +1642,7 @@
clocks = <&rpmcc RPM_QDSS_CLK>;
clock-names = "apb_pclk";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -1656,10 +1658,15 @@
remote-endpoint = <&tpiu_in>;
};
};
- port at 2 {
+ };
+
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
reg = <0>;
replicator_in: endpoint {
- slave-mode;
remote-endpoint = <&funnel_out>;
};
};
@@ -1673,7 +1680,7 @@
clocks = <&rpmcc RPM_QDSS_CLK>;
clock-names = "apb_pclk";
- ports {
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -1687,32 +1694,34 @@
port at 0 {
reg = <0>;
funnel_in0: endpoint {
- slave-mode;
remote-endpoint = <&etm0_out>;
};
};
port at 1 {
reg = <1>;
funnel_in1: endpoint {
- slave-mode;
remote-endpoint = <&etm1_out>;
};
};
port at 4 {
reg = <4>;
funnel_in4: endpoint {
- slave-mode;
remote-endpoint = <&etm2_out>;
};
};
port at 5 {
reg = <5>;
funnel_in5: endpoint {
- slave-mode;
remote-endpoint = <&etm3_out>;
};
};
- port at 8 {
+ };
+
+ out-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
reg = <0>;
funnel_out: endpoint {
remote-endpoint = <&replicator_in>;
@@ -1730,9 +1739,11 @@
cpu = <&CPU0>;
- port {
- etm0_out: endpoint {
- remote-endpoint = <&funnel_in0>;
+ out-ports {
+ port {
+ etm0_out: endpoint {
+ remote-endpoint = <&funnel_in0>;
+ };
};
};
};
@@ -1746,9 +1757,11 @@
cpu = <&CPU1>;
- port {
- etm1_out: endpoint {
- remote-endpoint = <&funnel_in1>;
+ out-ports {
+ port {
+ etm1_out: endpoint {
+ remote-endpoint = <&funnel_in1>;
+ };
};
};
};
@@ -1762,9 +1775,11 @@
cpu = <&CPU2>;
- port {
- etm2_out: endpoint {
- remote-endpoint = <&funnel_in4>;
+ out-ports {
+ port {
+ etm2_out: endpoint {
+ remote-endpoint = <&funnel_in4>;
+ };
};
};
};
@@ -1778,9 +1793,11 @@
cpu = <&CPU3>;
- port {
- etm3_out: endpoint {
- remote-endpoint = <&funnel_in5>;
+ out-ports {
+ port {
+ etm3_out: endpoint {
+ remote-endpoint = <&funnel_in5>;
+ };
};
};
};
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index d9019a4..37aac0b 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -770,10 +770,11 @@
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- port {
- etr_in: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out0>;
+ in-ports {
+ port {
+ etr_in: endpoint {
+ remote-endpoint = <&replicator_out0>;
+ };
};
};
};
@@ -785,10 +786,11 @@
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- port {
- tpiu_in: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out1>;
+ in-ports {
+ port {
+ tpiu_in: endpoint {
+ remote-endpoint = <&replicator_out1>;
+ };
};
};
};
@@ -800,7 +802,7 @@
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -816,10 +818,15 @@
remote-endpoint = <&tpiu_in>;
};
};
- port at 2 {
+ };
+
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
reg = <0>;
replicator_in: endpoint {
- slave-mode;
remote-endpoint = <&etf_out>;
};
};
@@ -833,7 +840,7 @@
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -843,10 +850,15 @@
remote-endpoint = <&replicator_in>;
};
};
- port at 1 {
+ };
+
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
reg = <0>;
etf_in: endpoint {
- slave-mode;
remote-endpoint = <&merger_out>;
};
};
@@ -860,7 +872,7 @@
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- ports {
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -873,11 +885,16 @@
port at 1 {
reg = <1>;
merger_in1: endpoint {
- slave-mode;
remote-endpoint = <&funnel1_out>;
};
};
- port at 8 {
+ };
+
+ out-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
reg = <0>;
merger_out: endpoint {
remote-endpoint = <&etf_in>;
@@ -893,7 +910,7 @@
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- ports {
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -910,11 +927,16 @@
port at 5 {
reg = <5>;
funnel1_in5: endpoint {
- slave-mode;
remote-endpoint = <&kpss_out>;
};
};
- port at 8 {
+ };
+
+ out-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
reg = <0>;
funnel1_out: endpoint {
remote-endpoint = <&merger_in1>;
@@ -930,39 +952,41 @@
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- ports {
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
port at 0 {
reg = <0>;
kpss_in0: endpoint {
- slave-mode;
remote-endpoint = <&etm0_out>;
};
};
port at 1 {
reg = <1>;
kpss_in1: endpoint {
- slave-mode;
remote-endpoint = <&etm1_out>;
};
};
port at 2 {
reg = <2>;
kpss_in2: endpoint {
- slave-mode;
remote-endpoint = <&etm2_out>;
};
};
port at 3 {
reg = <3>;
kpss_in3: endpoint {
- slave-mode;
remote-endpoint = <&etm3_out>;
};
};
- port at 8 {
+ };
+
+ out-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
reg = <0>;
kpss_out: endpoint {
remote-endpoint = <&funnel1_in5>;
@@ -980,9 +1004,11 @@
cpu = <&CPU0>;
- port {
- etm0_out: endpoint {
- remote-endpoint = <&kpss_in0>;
+ out-ports {
+ port {
+ etm0_out: endpoint {
+ remote-endpoint = <&kpss_in0>;
+ };
};
};
};
@@ -996,9 +1022,11 @@
cpu = <&CPU1>;
- port {
- etm1_out: endpoint {
- remote-endpoint = <&kpss_in1>;
+ out-ports {
+ port {
+ etm1_out: endpoint {
+ remote-endpoint = <&kpss_in1>;
+ };
};
};
};
@@ -1012,9 +1040,11 @@
cpu = <&CPU2>;
- port {
- etm2_out: endpoint {
- remote-endpoint = <&kpss_in2>;
+ out-ports {
+ port {
+ etm2_out: endpoint {
+ remote-endpoint = <&kpss_in2>;
+ };
};
};
};
@@ -1028,9 +1058,11 @@
cpu = <&CPU3>;
- port {
- etm3_out: endpoint {
- remote-endpoint = <&kpss_in3>;
+ out-ports {
+ port {
+ etm3_out: endpoint {
+ remote-endpoint = <&kpss_in3>;
+ };
};
};
};
--
2.7.4
^ permalink raw reply related [flat|nested] 51+ messages in thread
* [PATCH 09/11] dts: sama5d2: Update coresight bindings for hardware ports
2018-09-11 10:17 ` Suzuki K Poulose
@ 2018-09-11 10:17 ` Suzuki K Poulose
-1 siblings, 0 replies; 51+ messages in thread
From: Suzuki K Poulose @ 2018-09-11 10:17 UTC (permalink / raw)
To: linux-arm-kernel
Cc: linux-kernel, robh, frowand.list, devicetree, mathieu.poirier,
arm, sudeep.holla, Suzuki K Poulose, Nicolas Ferre,
Alexandre Belloni
Switch to the new coresight bindings for hardware ports
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
---
arch/arm/boot/dts/sama5d2.dtsi | 17 ++++++++++-------
1 file changed, 10 insertions(+), 7 deletions(-)
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index 61f68e5..f0fd2b1 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -84,10 +84,11 @@
clocks = <&mck>;
clock-names = "apb_pclk";
- port {
- etb_in: endpoint {
- slave-mode;
- remote-endpoint = <&etm_out>;
+ in-ports {
+ port {
+ etb_in: endpoint {
+ remote-endpoint = <&etm_out>;
+ };
};
};
};
@@ -99,9 +100,11 @@
clocks = <&mck>;
clock-names = "apb_pclk";
- port {
- etm_out: endpoint {
- remote-endpoint = <&etb_in>;
+ out-ports {
+ port {
+ etm_out: endpoint {
+ remote-endpoint = <&etb_in>;
+ };
};
};
};
--
2.7.4
^ permalink raw reply related [flat|nested] 51+ messages in thread* [PATCH 09/11] dts: sama5d2: Update coresight bindings for hardware ports
@ 2018-09-11 10:17 ` Suzuki K Poulose
0 siblings, 0 replies; 51+ messages in thread
From: Suzuki K Poulose @ 2018-09-11 10:17 UTC (permalink / raw)
To: linux-arm-kernel
Switch to the new coresight bindings for hardware ports
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
---
arch/arm/boot/dts/sama5d2.dtsi | 17 ++++++++++-------
1 file changed, 10 insertions(+), 7 deletions(-)
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index 61f68e5..f0fd2b1 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -84,10 +84,11 @@
clocks = <&mck>;
clock-names = "apb_pclk";
- port {
- etb_in: endpoint {
- slave-mode;
- remote-endpoint = <&etm_out>;
+ in-ports {
+ port {
+ etb_in: endpoint {
+ remote-endpoint = <&etm_out>;
+ };
};
};
};
@@ -99,9 +100,11 @@
clocks = <&mck>;
clock-names = "apb_pclk";
- port {
- etm_out: endpoint {
- remote-endpoint = <&etb_in>;
+ out-ports {
+ port {
+ etm_out: endpoint {
+ remote-endpoint = <&etb_in>;
+ };
};
};
};
--
2.7.4
^ permalink raw reply related [flat|nested] 51+ messages in thread
* [PATCH 10/11] dts: ste-dbx5x0: Update coresight bindings for hardware port
2018-09-11 10:17 ` Suzuki K Poulose
@ 2018-09-11 10:17 ` Suzuki K Poulose
-1 siblings, 0 replies; 51+ messages in thread
From: Suzuki K Poulose @ 2018-09-11 10:17 UTC (permalink / raw)
To: linux-arm-kernel
Cc: linux-kernel, robh, frowand.list, devicetree, mathieu.poirier,
arm, sudeep.holla, Suzuki K Poulose, Linus Walleij
Switch to the new coresight bindings
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
---
arch/arm/boot/dts/ste-dbx5x0.dtsi | 61 ++++++++++++++++++++++-----------------
1 file changed, 35 insertions(+), 26 deletions(-)
diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index 2310a4e..b1d5d3e 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -67,9 +67,11 @@
clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
clock-names = "apb_pclk", "atclk";
cpu = <&CPU0>;
- port {
- ptm0_out_port: endpoint {
- remote-endpoint = <&funnel_in_port0>;
+ out-ports {
+ port {
+ ptm0_out_port: endpoint {
+ remote-endpoint = <&funnel_in_port0>;
+ };
};
};
};
@@ -81,9 +83,11 @@
clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
clock-names = "apb_pclk", "atclk";
cpu = <&CPU1>;
- port {
- ptm1_out_port: endpoint {
- remote-endpoint = <&funnel_in_port1>;
+ out-ports {
+ port {
+ ptm1_out_port: endpoint {
+ remote-endpoint = <&funnel_in_port1>;
+ };
};
};
};
@@ -94,11 +98,10 @@
clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
clock-names = "apb_pclk", "atclk";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
- /* funnel output ports */
port@0 {
reg = <0>;
funnel_out_port: endpoint {
@@ -106,20 +109,22 @@
<&replicator_in_port0>;
};
};
+ };
- /* funnel input ports */
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
funnel_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&ptm0_out_port>;
};
};
- port@2 {
+ port@1 {
reg = <1>;
funnel_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&ptm1_out_port>;
};
};
@@ -131,11 +136,10 @@
clocks = <&prcmu_clk PRCMU_APEATCLK>;
clock-names = "atclk";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
- /* replicator output ports */
port@0 {
reg = <0>;
replicator_out_port0: endpoint {
@@ -148,12 +152,15 @@
remote-endpoint = <&etb_in_port>;
};
};
+ };
- /* replicator input port */
- port@2 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
replicator_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&funnel_out_port>;
};
};
@@ -166,10 +173,11 @@
clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
clock-names = "apb_pclk", "atclk";
- port {
- tpiu_in_port: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out_port0>;
+ in-ports {
+ port {
+ tpiu_in_port: endpoint {
+ remote-endpoint = <&replicator_out_port0>;
+ };
};
};
};
@@ -180,10 +188,11 @@
clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
clock-names = "apb_pclk", "atclk";
- port {
- etb_in_port: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out_port1>;
+ in-ports {
+ port {
+ etb_in_port: endpoint {
+ remote-endpoint = <&replicator_out_port1>;
+ };
};
};
};
--
2.7.4
^ permalink raw reply related [flat|nested] 51+ messages in thread* [PATCH 10/11] dts: ste-dbx5x0: Update coresight bindings for hardware port
@ 2018-09-11 10:17 ` Suzuki K Poulose
0 siblings, 0 replies; 51+ messages in thread
From: Suzuki K Poulose @ 2018-09-11 10:17 UTC (permalink / raw)
To: linux-arm-kernel
Switch to the new coresight bindings
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
---
arch/arm/boot/dts/ste-dbx5x0.dtsi | 61 ++++++++++++++++++++++-----------------
1 file changed, 35 insertions(+), 26 deletions(-)
diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index 2310a4e..b1d5d3e 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -67,9 +67,11 @@
clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
clock-names = "apb_pclk", "atclk";
cpu = <&CPU0>;
- port {
- ptm0_out_port: endpoint {
- remote-endpoint = <&funnel_in_port0>;
+ out-ports {
+ port {
+ ptm0_out_port: endpoint {
+ remote-endpoint = <&funnel_in_port0>;
+ };
};
};
};
@@ -81,9 +83,11 @@
clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
clock-names = "apb_pclk", "atclk";
cpu = <&CPU1>;
- port {
- ptm1_out_port: endpoint {
- remote-endpoint = <&funnel_in_port1>;
+ out-ports {
+ port {
+ ptm1_out_port: endpoint {
+ remote-endpoint = <&funnel_in_port1>;
+ };
};
};
};
@@ -94,11 +98,10 @@
clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
clock-names = "apb_pclk", "atclk";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
- /* funnel output ports */
port at 0 {
reg = <0>;
funnel_out_port: endpoint {
@@ -106,20 +109,22 @@
<&replicator_in_port0>;
};
};
+ };
- /* funnel input ports */
- port at 1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
reg = <0>;
funnel_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&ptm0_out_port>;
};
};
- port at 2 {
+ port at 1 {
reg = <1>;
funnel_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&ptm1_out_port>;
};
};
@@ -131,11 +136,10 @@
clocks = <&prcmu_clk PRCMU_APEATCLK>;
clock-names = "atclk";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
- /* replicator output ports */
port at 0 {
reg = <0>;
replicator_out_port0: endpoint {
@@ -148,12 +152,15 @@
remote-endpoint = <&etb_in_port>;
};
};
+ };
- /* replicator input port */
- port at 2 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
reg = <0>;
replicator_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&funnel_out_port>;
};
};
@@ -166,10 +173,11 @@
clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
clock-names = "apb_pclk", "atclk";
- port {
- tpiu_in_port: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out_port0>;
+ in-ports {
+ port {
+ tpiu_in_port: endpoint {
+ remote-endpoint = <&replicator_out_port0>;
+ };
};
};
};
@@ -180,10 +188,11 @@
clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
clock-names = "apb_pclk", "atclk";
- port {
- etb_in_port: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out_port1>;
+ in-ports {
+ port {
+ etb_in_port: endpoint {
+ remote-endpoint = <&replicator_out_port1>;
+ };
};
};
};
--
2.7.4
^ permalink raw reply related [flat|nested] 51+ messages in thread
* [PATCH 11/11] dts: tc2: Update coresight bindings for hardware ports
2018-09-11 10:17 ` Suzuki K Poulose
@ 2018-09-11 10:17 ` Suzuki K Poulose
-1 siblings, 0 replies; 51+ messages in thread
From: Suzuki K Poulose @ 2018-09-11 10:17 UTC (permalink / raw)
To: linux-arm-kernel
Cc: linux-kernel, robh, frowand.list, devicetree, mathieu.poirier,
arm, sudeep.holla, Suzuki K Poulose, Liviu Dudau,
Lorenzo Pieralisi
Switch to the new coresight bindings
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
---
arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts | 90 +++++++++++++++++-------------
1 file changed, 51 insertions(+), 39 deletions(-)
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
index ac6b90e..3a50906 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
@@ -393,10 +393,11 @@
clocks = <&oscclk6a>;
clock-names = "apb_pclk";
- port {
- etb_in_port: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out_port0>;
+ in-ports {
+ port {
+ etb_in_port: endpoint {
+ remote-endpoint = <&replicator_out_port0>;
+ };
};
};
};
@@ -407,10 +408,11 @@
clocks = <&oscclk6a>;
clock-names = "apb_pclk";
- port {
- tpiu_in_port: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out_port1>;
+ in-ports {
+ port {
+ tpiu_in_port: endpoint {
+ remote-endpoint = <&replicator_out_port1>;
+ };
};
};
};
@@ -421,11 +423,10 @@
*/
compatible = "arm,coresight-replicator";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
- /* replicator output ports */
port@0 {
reg = <0>;
replicator_out_port0: endpoint {
@@ -439,12 +440,15 @@
remote-endpoint = <&tpiu_in_port>;
};
};
+ };
- /* replicator input port */
- port@2 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
replicator_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&funnel_out_port0>;
};
};
@@ -457,11 +461,10 @@
clocks = <&oscclk6a>;
clock-names = "apb_pclk";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
- /* funnel output port */
port@0 {
reg = <0>;
funnel_out_port0: endpoint {
@@ -469,28 +472,29 @@
<&replicator_in_port0>;
};
};
+ };
- /* funnel input ports */
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
funnel_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&ptm0_out_port>;
};
};
- port@2 {
+ port@1 {
reg = <1>;
funnel_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&ptm1_out_port>;
};
};
- port@3 {
+ port@2 {
reg = <2>;
funnel_in_port2: endpoint {
- slave-mode;
remote-endpoint = <&etm0_out_port>;
};
};
@@ -500,7 +504,6 @@
port@4 {
reg = <4>;
funnel_in_port4: endpoint {
- slave-mode;
remote-endpoint = <&etm1_out_port>;
};
};
@@ -508,7 +511,6 @@
port@5 {
reg = <5>;
funnel_in_port5: endpoint {
- slave-mode;
remote-endpoint = <&etm2_out_port>;
};
};
@@ -522,9 +524,11 @@
cpu = <&cpu0>;
clocks = <&oscclk6a>;
clock-names = "apb_pclk";
- port {
- ptm0_out_port: endpoint {
- remote-endpoint = <&funnel_in_port0>;
+ out-ports {
+ port {
+ ptm0_out_port: endpoint {
+ remote-endpoint = <&funnel_in_port0>;
+ };
};
};
};
@@ -536,9 +540,11 @@
cpu = <&cpu1>;
clocks = <&oscclk6a>;
clock-names = "apb_pclk";
- port {
- ptm1_out_port: endpoint {
- remote-endpoint = <&funnel_in_port1>;
+ out-ports {
+ port {
+ ptm1_out_port: endpoint {
+ remote-endpoint = <&funnel_in_port1>;
+ };
};
};
};
@@ -550,9 +556,11 @@
cpu = <&cpu2>;
clocks = <&oscclk6a>;
clock-names = "apb_pclk";
- port {
- etm0_out_port: endpoint {
- remote-endpoint = <&funnel_in_port2>;
+ out-ports {
+ port {
+ etm0_out_port: endpoint {
+ remote-endpoint = <&funnel_in_port2>;
+ };
};
};
};
@@ -564,9 +572,11 @@
cpu = <&cpu3>;
clocks = <&oscclk6a>;
clock-names = "apb_pclk";
- port {
- etm1_out_port: endpoint {
- remote-endpoint = <&funnel_in_port4>;
+ out-ports {
+ port {
+ etm1_out_port: endpoint {
+ remote-endpoint = <&funnel_in_port4>;
+ };
};
};
};
@@ -578,9 +588,11 @@
cpu = <&cpu4>;
clocks = <&oscclk6a>;
clock-names = "apb_pclk";
- port {
- etm2_out_port: endpoint {
- remote-endpoint = <&funnel_in_port5>;
+ out-ports {
+ port {
+ etm2_out_port: endpoint {
+ remote-endpoint = <&funnel_in_port5>;
+ };
};
};
};
--
2.7.4
^ permalink raw reply related [flat|nested] 51+ messages in thread* [PATCH 11/11] dts: tc2: Update coresight bindings for hardware ports
@ 2018-09-11 10:17 ` Suzuki K Poulose
0 siblings, 0 replies; 51+ messages in thread
From: Suzuki K Poulose @ 2018-09-11 10:17 UTC (permalink / raw)
To: linux-arm-kernel
Switch to the new coresight bindings
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
---
arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts | 90 +++++++++++++++++-------------
1 file changed, 51 insertions(+), 39 deletions(-)
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
index ac6b90e..3a50906 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
@@ -393,10 +393,11 @@
clocks = <&oscclk6a>;
clock-names = "apb_pclk";
- port {
- etb_in_port: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out_port0>;
+ in-ports {
+ port {
+ etb_in_port: endpoint {
+ remote-endpoint = <&replicator_out_port0>;
+ };
};
};
};
@@ -407,10 +408,11 @@
clocks = <&oscclk6a>;
clock-names = "apb_pclk";
- port {
- tpiu_in_port: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out_port1>;
+ in-ports {
+ port {
+ tpiu_in_port: endpoint {
+ remote-endpoint = <&replicator_out_port1>;
+ };
};
};
};
@@ -421,11 +423,10 @@
*/
compatible = "arm,coresight-replicator";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
- /* replicator output ports */
port at 0 {
reg = <0>;
replicator_out_port0: endpoint {
@@ -439,12 +440,15 @@
remote-endpoint = <&tpiu_in_port>;
};
};
+ };
- /* replicator input port */
- port at 2 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
reg = <0>;
replicator_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&funnel_out_port0>;
};
};
@@ -457,11 +461,10 @@
clocks = <&oscclk6a>;
clock-names = "apb_pclk";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
- /* funnel output port */
port at 0 {
reg = <0>;
funnel_out_port0: endpoint {
@@ -469,28 +472,29 @@
<&replicator_in_port0>;
};
};
+ };
- /* funnel input ports */
- port at 1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
reg = <0>;
funnel_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&ptm0_out_port>;
};
};
- port at 2 {
+ port at 1 {
reg = <1>;
funnel_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&ptm1_out_port>;
};
};
- port at 3 {
+ port at 2 {
reg = <2>;
funnel_in_port2: endpoint {
- slave-mode;
remote-endpoint = <&etm0_out_port>;
};
};
@@ -500,7 +504,6 @@
port at 4 {
reg = <4>;
funnel_in_port4: endpoint {
- slave-mode;
remote-endpoint = <&etm1_out_port>;
};
};
@@ -508,7 +511,6 @@
port at 5 {
reg = <5>;
funnel_in_port5: endpoint {
- slave-mode;
remote-endpoint = <&etm2_out_port>;
};
};
@@ -522,9 +524,11 @@
cpu = <&cpu0>;
clocks = <&oscclk6a>;
clock-names = "apb_pclk";
- port {
- ptm0_out_port: endpoint {
- remote-endpoint = <&funnel_in_port0>;
+ out-ports {
+ port {
+ ptm0_out_port: endpoint {
+ remote-endpoint = <&funnel_in_port0>;
+ };
};
};
};
@@ -536,9 +540,11 @@
cpu = <&cpu1>;
clocks = <&oscclk6a>;
clock-names = "apb_pclk";
- port {
- ptm1_out_port: endpoint {
- remote-endpoint = <&funnel_in_port1>;
+ out-ports {
+ port {
+ ptm1_out_port: endpoint {
+ remote-endpoint = <&funnel_in_port1>;
+ };
};
};
};
@@ -550,9 +556,11 @@
cpu = <&cpu2>;
clocks = <&oscclk6a>;
clock-names = "apb_pclk";
- port {
- etm0_out_port: endpoint {
- remote-endpoint = <&funnel_in_port2>;
+ out-ports {
+ port {
+ etm0_out_port: endpoint {
+ remote-endpoint = <&funnel_in_port2>;
+ };
};
};
};
@@ -564,9 +572,11 @@
cpu = <&cpu3>;
clocks = <&oscclk6a>;
clock-names = "apb_pclk";
- port {
- etm1_out_port: endpoint {
- remote-endpoint = <&funnel_in_port4>;
+ out-ports {
+ port {
+ etm1_out_port: endpoint {
+ remote-endpoint = <&funnel_in_port4>;
+ };
};
};
};
@@ -578,9 +588,11 @@
cpu = <&cpu4>;
clocks = <&oscclk6a>;
clock-names = "apb_pclk";
- port {
- etm2_out_port: endpoint {
- remote-endpoint = <&funnel_in_port5>;
+ out-ports {
+ port {
+ etm2_out_port: endpoint {
+ remote-endpoint = <&funnel_in_port5>;
+ };
};
};
};
--
2.7.4
^ permalink raw reply related [flat|nested] 51+ messages in thread* Re: [PATCH 11/11] dts: tc2: Update coresight bindings for hardware ports
2018-09-11 10:17 ` Suzuki K Poulose
@ 2018-09-11 17:01 ` Sudeep Holla
-1 siblings, 0 replies; 51+ messages in thread
From: Sudeep Holla @ 2018-09-11 17:01 UTC (permalink / raw)
To: Suzuki K Poulose
Cc: linux-arm-kernel, linux-kernel, robh, frowand.list, devicetree,
mathieu.poirier, arm, Liviu Dudau, Lorenzo Pieralisi
On Tue, Sep 11, 2018 at 11:17:12AM +0100, Suzuki K Poulose wrote:
> Switch to the new coresight bindings
>
I still see the below warnings:
vexpress-v2p-ca15_a7.dtb: Warning (graph_child_address):
/replicator/in-ports: graph node has single child node 'port@0',
#address-cells/#size-cells are not necessary
vexpress-v2p-ca15_a7.dtb: Warning (graph_child_address):
/funnel@20040000/out-ports: graph node has single child node 'port@0',
#address-cells/#size-cells are not necessary
I need the below patch to fix them, let me know if it looks OK, I can
amend and apply.
Regards,
Sudeep
-->8
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
index 3a5090616bc6..8b926c30ccd1 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
@@ -443,11 +443,7 @@
};
in-ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ port {
replicator_in_port0: endpoint {
remote-endpoint = <&funnel_out_port0>;
};
@@ -462,11 +458,7 @@
clocks = <&oscclk6a>;
clock-names = "apb_pclk";
out-ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ port {
funnel_out_port0: endpoint {
remote-endpoint =
<&replicator_in_port0>;
^ permalink raw reply related [flat|nested] 51+ messages in thread* [PATCH 11/11] dts: tc2: Update coresight bindings for hardware ports
@ 2018-09-11 17:01 ` Sudeep Holla
0 siblings, 0 replies; 51+ messages in thread
From: Sudeep Holla @ 2018-09-11 17:01 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Sep 11, 2018 at 11:17:12AM +0100, Suzuki K Poulose wrote:
> Switch to the new coresight bindings
>
I still see the below warnings:
vexpress-v2p-ca15_a7.dtb: Warning (graph_child_address):
/replicator/in-ports: graph node has single child node 'port at 0',
#address-cells/#size-cells are not necessary
vexpress-v2p-ca15_a7.dtb: Warning (graph_child_address):
/funnel at 20040000/out-ports: graph node has single child node 'port at 0',
#address-cells/#size-cells are not necessary
I need the below patch to fix them, let me know if it looks OK, I can
amend and apply.
Regards,
Sudeep
-->8
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
index 3a5090616bc6..8b926c30ccd1 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
@@ -443,11 +443,7 @@
};
in-ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port at 0 {
- reg = <0>;
+ port {
replicator_in_port0: endpoint {
remote-endpoint = <&funnel_out_port0>;
};
@@ -462,11 +458,7 @@
clocks = <&oscclk6a>;
clock-names = "apb_pclk";
out-ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port at 0 {
- reg = <0>;
+ port {
funnel_out_port0: endpoint {
remote-endpoint =
<&replicator_in_port0>;
^ permalink raw reply related [flat|nested] 51+ messages in thread* Re: [PATCH 11/11] dts: tc2: Update coresight bindings for hardware ports
2018-09-11 17:01 ` Sudeep Holla
@ 2018-09-11 17:15 ` Suzuki K Poulose
-1 siblings, 0 replies; 51+ messages in thread
From: Suzuki K Poulose @ 2018-09-11 17:15 UTC (permalink / raw)
To: Sudeep Holla
Cc: linux-arm-kernel, linux-kernel, robh, frowand.list, devicetree,
mathieu.poirier, arm, Liviu Dudau, Lorenzo Pieralisi
On 09/11/2018 06:01 PM, Sudeep Holla wrote:
> On Tue, Sep 11, 2018 at 11:17:12AM +0100, Suzuki K Poulose wrote:
>> Switch to the new coresight bindings
>>
>
> I still see the below warnings:
>
> vexpress-v2p-ca15_a7.dtb: Warning (graph_child_address):
> /replicator/in-ports: graph node has single child node 'port@0',
> #address-cells/#size-cells are not necessary
> vexpress-v2p-ca15_a7.dtb: Warning (graph_child_address):
> /funnel@20040000/out-ports: graph node has single child node 'port@0',
> #address-cells/#size-cells are not necessary
>
> I need the below patch to fix them, let me know if it looks OK, I can
> amend and apply.
Thanks for reporting. I purposefully added the "address-cells" and
followed the format everywhere in the series thinking that, that is
indeed the formal way of doing it, rather than having implicit port
numbers. I can send an updated series fixing it everywhere.
Regards
Suzuki
>
> Regards,
> Sudeep
>
> -->8
>
> diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
> index 3a5090616bc6..8b926c30ccd1 100644
> --- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
> +++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
> @@ -443,11 +443,7 @@
> };
>
> in-ports {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - port@0 {
> - reg = <0>;
> + port {
> replicator_in_port0: endpoint {
> remote-endpoint = <&funnel_out_port0>;
> };
> @@ -462,11 +458,7 @@
> clocks = <&oscclk6a>;
> clock-names = "apb_pclk";
> out-ports {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - port@0 {
> - reg = <0>;
> + port {
> funnel_out_port0: endpoint {
> remote-endpoint =
> <&replicator_in_port0>;
>
^ permalink raw reply [flat|nested] 51+ messages in thread* [PATCH 11/11] dts: tc2: Update coresight bindings for hardware ports
@ 2018-09-11 17:15 ` Suzuki K Poulose
0 siblings, 0 replies; 51+ messages in thread
From: Suzuki K Poulose @ 2018-09-11 17:15 UTC (permalink / raw)
To: linux-arm-kernel
On 09/11/2018 06:01 PM, Sudeep Holla wrote:
> On Tue, Sep 11, 2018 at 11:17:12AM +0100, Suzuki K Poulose wrote:
>> Switch to the new coresight bindings
>>
>
> I still see the below warnings:
>
> vexpress-v2p-ca15_a7.dtb: Warning (graph_child_address):
> /replicator/in-ports: graph node has single child node 'port at 0',
> #address-cells/#size-cells are not necessary
> vexpress-v2p-ca15_a7.dtb: Warning (graph_child_address):
> /funnel at 20040000/out-ports: graph node has single child node 'port at 0',
> #address-cells/#size-cells are not necessary
>
> I need the below patch to fix them, let me know if it looks OK, I can
> amend and apply.
Thanks for reporting. I purposefully added the "address-cells" and
followed the format everywhere in the series thinking that, that is
indeed the formal way of doing it, rather than having implicit port
numbers. I can send an updated series fixing it everywhere.
Regards
Suzuki
>
> Regards,
> Sudeep
>
> -->8
>
> diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
> index 3a5090616bc6..8b926c30ccd1 100644
> --- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
> +++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
> @@ -443,11 +443,7 @@
> };
>
> in-ports {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - port at 0 {
> - reg = <0>;
> + port {
> replicator_in_port0: endpoint {
> remote-endpoint = <&funnel_out_port0>;
> };
> @@ -462,11 +458,7 @@
> clocks = <&oscclk6a>;
> clock-names = "apb_pclk";
> out-ports {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - port at 0 {
> - reg = <0>;
> + port {
> funnel_out_port0: endpoint {
> remote-endpoint =
> <&replicator_in_port0>;
>
^ permalink raw reply [flat|nested] 51+ messages in thread* Re: [PATCH 11/11] dts: tc2: Update coresight bindings for hardware ports
2018-09-11 17:15 ` Suzuki K Poulose
@ 2018-09-11 17:23 ` Sudeep Holla
-1 siblings, 0 replies; 51+ messages in thread
From: Sudeep Holla @ 2018-09-11 17:23 UTC (permalink / raw)
To: Suzuki K Poulose
Cc: Sudeep Holla, linux-arm-kernel, linux-kernel, robh, frowand.list,
devicetree, mathieu.poirier, arm, Liviu Dudau, Lorenzo Pieralisi
On 11/09/18 18:15, Suzuki K Poulose wrote:
> On 09/11/2018 06:01 PM, Sudeep Holla wrote:
>> On Tue, Sep 11, 2018 at 11:17:12AM +0100, Suzuki K Poulose wrote:
>>> Switch to the new coresight bindings
>>>
>>
>> I still see the below warnings:
>>
>> vexpress-v2p-ca15_a7.dtb: Warning (graph_child_address):
>> /replicator/in-ports: graph node has single child node 'port@0',
>> #address-cells/#size-cells are not necessary
>> vexpress-v2p-ca15_a7.dtb: Warning (graph_child_address):
>> /funnel@20040000/out-ports: graph node has single child node
>> 'port@0',
>> #address-cells/#size-cells are not necessary
>>
>> I need the below patch to fix them, let me know if it looks OK, I can
>> amend and apply.
>
> Thanks for reporting. I purposefully added the "address-cells" and
> followed the format everywhere in the series thinking that, that is
> indeed the formal way of doing it, rather than having implicit port
> numbers. I can send an updated series fixing it everywhere.
>
No need to post the update for TC2 unless it's different from what I
have proposed.
--
Regards,
Sudeep
^ permalink raw reply [flat|nested] 51+ messages in thread
* [PATCH 11/11] dts: tc2: Update coresight bindings for hardware ports
@ 2018-09-11 17:23 ` Sudeep Holla
0 siblings, 0 replies; 51+ messages in thread
From: Sudeep Holla @ 2018-09-11 17:23 UTC (permalink / raw)
To: linux-arm-kernel
On 11/09/18 18:15, Suzuki K Poulose wrote:
> On 09/11/2018 06:01 PM, Sudeep Holla wrote:
>> On Tue, Sep 11, 2018 at 11:17:12AM +0100, Suzuki K Poulose wrote:
>>> Switch to the new coresight bindings
>>>
>>
>> I still see the below warnings:
>>
>> vexpress-v2p-ca15_a7.dtb: Warning (graph_child_address):
>> ????/replicator/in-ports: graph node has single child node 'port at 0',
>> ????#address-cells/#size-cells are not necessary
>> vexpress-v2p-ca15_a7.dtb: Warning (graph_child_address):
>> ????/funnel at 20040000/out-ports: graph node has single child node
>> 'port at 0',
>> ????#address-cells/#size-cells are not necessary
>>
>> I need the below patch to fix them, let me know if it looks OK, I can
>> amend and apply.
>
> Thanks for reporting. I purposefully added the "address-cells" and
> followed the format everywhere in the series thinking that, that is
> indeed the formal way of doing it, rather than having implicit port
> numbers. I can send an updated series fixing it everywhere.
>
No need to post the update for TC2 unless it's different from what I
have proposed.
--
Regards,
Sudeep
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [PATCH 11/11] dts: tc2: Update coresight bindings for hardware ports
2018-09-11 17:23 ` Sudeep Holla
@ 2018-09-11 17:30 ` Suzuki K Poulose
-1 siblings, 0 replies; 51+ messages in thread
From: Suzuki K Poulose @ 2018-09-11 17:30 UTC (permalink / raw)
To: Sudeep Holla
Cc: linux-arm-kernel, linux-kernel, robh, frowand.list, devicetree,
mathieu.poirier, arm, Liviu Dudau, Lorenzo Pieralisi
On 09/11/2018 06:23 PM, Sudeep Holla wrote:
>
>
> On 11/09/18 18:15, Suzuki K Poulose wrote:
>> On 09/11/2018 06:01 PM, Sudeep Holla wrote:
>>> On Tue, Sep 11, 2018 at 11:17:12AM +0100, Suzuki K Poulose wrote:
>>>> Switch to the new coresight bindings
>>>>
>>>
>>> I still see the below warnings:
>>>
>>> vexpress-v2p-ca15_a7.dtb: Warning (graph_child_address):
>>> /replicator/in-ports: graph node has single child node 'port@0',
>>> #address-cells/#size-cells are not necessary
>>> vexpress-v2p-ca15_a7.dtb: Warning (graph_child_address):
>>> /funnel@20040000/out-ports: graph node has single child node
>>> 'port@0',
>>> #address-cells/#size-cells are not necessary
>>>
>>> I need the below patch to fix them, let me know if it looks OK, I can
>>> amend and apply.
>>
>> Thanks for reporting. I purposefully added the "address-cells" and
>> followed the format everywhere in the series thinking that, that is
>> indeed the formal way of doing it, rather than having implicit port
>> numbers. I can send an updated series fixing it everywhere.
>>
> No need to post the update for TC2 unless it's different from what I
> have proposed.
>
Yes, the changes look good. Thanks Sudeep. I will drop this patch from
the next version then.
Btw, my kernel build didn't trigger those warnings.
Thanks
Suzuki
^ permalink raw reply [flat|nested] 51+ messages in thread
* [PATCH 11/11] dts: tc2: Update coresight bindings for hardware ports
@ 2018-09-11 17:30 ` Suzuki K Poulose
0 siblings, 0 replies; 51+ messages in thread
From: Suzuki K Poulose @ 2018-09-11 17:30 UTC (permalink / raw)
To: linux-arm-kernel
On 09/11/2018 06:23 PM, Sudeep Holla wrote:
>
>
> On 11/09/18 18:15, Suzuki K Poulose wrote:
>> On 09/11/2018 06:01 PM, Sudeep Holla wrote:
>>> On Tue, Sep 11, 2018 at 11:17:12AM +0100, Suzuki K Poulose wrote:
>>>> Switch to the new coresight bindings
>>>>
>>>
>>> I still see the below warnings:
>>>
>>> vexpress-v2p-ca15_a7.dtb: Warning (graph_child_address):
>>> ????/replicator/in-ports: graph node has single child node 'port at 0',
>>> ????#address-cells/#size-cells are not necessary
>>> vexpress-v2p-ca15_a7.dtb: Warning (graph_child_address):
>>> ????/funnel at 20040000/out-ports: graph node has single child node
>>> 'port at 0',
>>> ????#address-cells/#size-cells are not necessary
>>>
>>> I need the below patch to fix them, let me know if it looks OK, I can
>>> amend and apply.
>>
>> Thanks for reporting. I purposefully added the "address-cells" and
>> followed the format everywhere in the series thinking that, that is
>> indeed the formal way of doing it, rather than having implicit port
>> numbers. I can send an updated series fixing it everywhere.
>>
> No need to post the update for TC2 unless it's different from what I
> have proposed.
>
Yes, the changes look good. Thanks Sudeep. I will drop this patch from
the next version then.
Btw, my kernel build didn't trigger those warnings.
Thanks
Suzuki
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [PATCH 00/11] dts: Update coresight device tree bindings
2018-09-11 10:17 ` Suzuki K Poulose
(?)
@ 2018-09-11 21:21 ` Suzuki K Poulose
-1 siblings, 0 replies; 51+ messages in thread
From: Suzuki K Poulose @ 2018-09-11 21:21 UTC (permalink / raw)
To: linux-arm-kernel
Cc: linux-kernel, robh, frowand.list, devicetree, mathieu.poirier,
arm, sudeep.holla, Alexandre Belloni, Andy Gross,
Benoît Cousson, David Brown, Fabio Estevam, Ivan T . Ivanov,
Linus Walleij, linux-omap, lipengcheng8, Liviu Dudau,
Lorenzo Pieralisi, Nicolas Ferre, orsonzhai,
Pengutronix Kernel Team, Sascha Hauer, Shawn Guo, Tony Lindgren,
Wei Xu, zhang.lyra
On 09/11/2018 11:17 AM, Suzuki K Poulose wrote:
> Coresight DT bindings have been updated to obey the DTS rules
> for label/address matching for graph nodes. The changes are in
> coresight/next tree scheduled for v4.20. This series updates the
> in kernel dts to match the new bindings along with updating a couple
> of new examples (e.,g CATU) in the Documentation (which were missed
> as they were still in flight when we created the series).
>
> Please note that this should not be pulled for v4.19, which I assume
> is a safe assumption. But please do pull it for v4.20.
> The dt updates for the Juno boards were sent earlier with the original
> DT update series and has been queued for v4.20.
>
> Applies on coresight/next (which is based on v4.19) and should apply
> cleanly on v4.19-rc3.
>
All,
There are some additional warnings triggered by this series, as reported
by Sudeep [0]. I intend to fix the warnings and send and updated version
soon. So kindly ignore this thread. Apologies.
[0]
http://lists.infradead.org/pipermail/linux-arm-kernel/2018-September/601121.html
Suzuki
^ permalink raw reply [flat|nested] 51+ messages in thread
* [PATCH 00/11] dts: Update coresight device tree bindings
@ 2018-09-11 21:21 ` Suzuki K Poulose
0 siblings, 0 replies; 51+ messages in thread
From: Suzuki K Poulose @ 2018-09-11 21:21 UTC (permalink / raw)
To: linux-arm-kernel
On 09/11/2018 11:17 AM, Suzuki K Poulose wrote:
> Coresight DT bindings have been updated to obey the DTS rules
> for label/address matching for graph nodes. The changes are in
> coresight/next tree scheduled for v4.20. This series updates the
> in kernel dts to match the new bindings along with updating a couple
> of new examples (e.,g CATU) in the Documentation (which were missed
> as they were still in flight when we created the series).
>
> Please note that this should not be pulled for v4.19, which I assume
> is a safe assumption. But please do pull it for v4.20.
> The dt updates for the Juno boards were sent earlier with the original
> DT update series and has been queued for v4.20.
>
> Applies on coresight/next (which is based on v4.19) and should apply
> cleanly on v4.19-rc3.
>
All,
There are some additional warnings triggered by this series, as reported
by Sudeep [0]. I intend to fix the warnings and send and updated version
soon. So kindly ignore this thread. Apologies.
[0]
http://lists.infradead.org/pipermail/linux-arm-kernel/2018-September/601121.html
Suzuki
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [PATCH 00/11] dts: Update coresight device tree bindings
@ 2018-09-11 21:21 ` Suzuki K Poulose
0 siblings, 0 replies; 51+ messages in thread
From: Suzuki K Poulose @ 2018-09-11 21:21 UTC (permalink / raw)
To: linux-arm-kernel
Cc: linux-kernel, robh, frowand.list, devicetree, mathieu.poirier,
arm, sudeep.holla, Alexandre Belloni, Andy Gross,
Benoît Cousson, David Brown, Fabio Estevam, Ivan T . Ivanov,
Linus Walleij, linux-omap, lipengcheng8, Liviu Dudau,
Lorenzo Pieralisi, Nicolas Ferre, orsonzhai,
Pengutronix Kernel Team, Sascha Hauer
On 09/11/2018 11:17 AM, Suzuki K Poulose wrote:
> Coresight DT bindings have been updated to obey the DTS rules
> for label/address matching for graph nodes. The changes are in
> coresight/next tree scheduled for v4.20. This series updates the
> in kernel dts to match the new bindings along with updating a couple
> of new examples (e.,g CATU) in the Documentation (which were missed
> as they were still in flight when we created the series).
>
> Please note that this should not be pulled for v4.19, which I assume
> is a safe assumption. But please do pull it for v4.20.
> The dt updates for the Juno boards were sent earlier with the original
> DT update series and has been queued for v4.20.
>
> Applies on coresight/next (which is based on v4.19) and should apply
> cleanly on v4.19-rc3.
>
All,
There are some additional warnings triggered by this series, as reported
by Sudeep [0]. I intend to fix the warnings and send and updated version
soon. So kindly ignore this thread. Apologies.
[0]
http://lists.infradead.org/pipermail/linux-arm-kernel/2018-September/601121.html
Suzuki
^ permalink raw reply [flat|nested] 51+ messages in thread