[PATCH v11 00/18] RISC-V SiFive FU540 support SPL

[Sean Anderson <seanga2@gmail.com>]

On 5/20/20 2:32 AM, Bin Meng wrote:
> Hi Sean,
> 
> On Wed, May 20, 2020 at 2:06 PM Sean Anderson <seanga2@gmail.com> wrote:
>>
>> On 5/19/20 11:07 PM, Rick Chen wrote:
>>> Hi Bin
>>>
>>>> -----Original Message-----
>>>> From: Bin Meng [mailto:bmeng.cn at gmail.com]
>>>> Sent: Tuesday, May 19, 2020 4:44 PM
>>>> To: Pragnesh Patel; Rick Jian-Zhi Chen(???)
>>>> Subject: Re: [PATCH v11 00/18] RISC-V SiFive FU540 support SPL
>>>>
>>>> Hi Rick,
>>>>
>>>> On Tue, May 19, 2020 at 3:04 PM Pragnesh Patel <pragnesh.patel@sifive.com> wrote:
>>>>>
>>>>> This series add support for SPL to FU540. U-Boot SPL can boot from
>>>>> L2 LIM (0x0800_0000) and jump to OpenSBI(FW_DYNAMIC firmware) and
>>>>> U-Boot proper from MMC devices.
>>>>>
>>>>> This series depends on:
>>>>> [1] https://patchwork.ozlabs.org/patch/1281853
>>>>> [2] https://patchwork.ozlabs.org/patch/1281852
>>>>>
>>>>> All these together is available for testing here [3] [3]
>>>>> https://github.com/pragnesh26992/u-boot/tree/spl
>>>>>
>>>>> How to test this patch:
>>>>> 1) Go to OpenSBI-dir : make PLATFORM=generic FW_DYNAMIC=y
>>>>> 2) export
>>>>> OPENSBI=<path/to/opensbi/build/platform/generic/firmware/fw_dynamic.bi
>>>>> n>
>>>>> 3) Change to u-boot-dir
>>>>> 4) make sifive_fu540_defconfig
>>>>> 5) make all
>>>>> 6) Format the SD card (make sure the disk has GPT, otherwise use gdisk
>>>>> to switch)
>>>>>
>>>>>         # sudo sgdisk --clear \
>>>>>         > --set-alignment=2 \
>>>>>         > --new=1:34:2081 --change-name=1:loader1 --typecode=1:5B193300-FC78-40CD-8002-E86C45580B47 \
>>>>>         > --new=2:2082:10273 --change-name=2:loader2 --typecode=2:2E54B353-1271-4842-806F-E436D6AF6985 \
>>>>>         > --new=3:10274: --change-name=3:rootfs --typecode=3:0FC63DAF-8483-4772-8E79-3D69D8477DE4 \
>>>>>         > /dev/sda
>>>>>
>>>>> 7) sudo dd if=spl/u-boot-spl.bin of=/dev/sda seek=34
>>>>> 8) sudo dd if=u-boot.itb of=/dev/sda seek=2082
>>>>>
>>>>> Changes in v11:
>>>>> - Remove TPL related code and OF_PLATDATA from FU540
>>>>>   DDR driver (drivers/ram/sifive/fu540_ddr.c)
>>>>> - Update FU540 doc (doc/board/sifive/fu540.rst)
>>>>>   Remove unnecessary print
>>>>
>>>> Could we get this v11 applied as soon as possible for v2020.07?
>>>
>>> No problem, if everything is OK, I will applied ASAP.
>>> But Jagan seem have some responses, please check about it.
>>>
>>>>
>>>>> This series depends on:
>>>>> [1] https://patchwork.ozlabs.org/patch/1281853
>>>>> [2] https://patchwork.ozlabs.org/patch/1281852
>>>>
>>>> Looks this series "riscv: Add Sipeed Maix support" was not applied neither ?
>>>
>>> Yes, the reason is that the CI verification of v10 of this series
>>> "riscv: Add Sipeed Maix support" still fail.
>>> Please check the discussion of [v10,20/21] doc: riscv: Add
>>> documentation for Sipeed Maix Bit
>>>
>>> https://patchwork.ozlabs.org/project/uboot/patch/20200503024637.327733-21-seanga2 at gmail.com/
>>>
>>> That is why I still not pull it yet.
>>>
>>> Thanks,
>>> Rick
>>
>> I think I have fixed the bug. However, travis is currently failing
>> during apt with
>>
>> E: Failed to fetch https://apt.llvm.org/bionic/dists/llvm-toolchain-bionic-10/main/binary-amd64/Packages.gz  File has unexpected size (8765 != 8774). Mirror sync in progress? [IP: 151.101.186.49 443]
>>    Release file created at: Tue, 19 May 2020 21:55:10 +0000
> 
> Travis is not stable. Could you please try Azure?

I've never used azure for CI before. Is there a guide to using it with
u-boot anywhere? Perhaps this [1]? Will I need to pay for server time?

[1] https://docs.microsoft.com/en-us/azure/devops/pipelines/repos/github

In any case, it appears that the repo has gotten fixed. The build [2]
passes for SPL targets (which were the only failures last time).

[2] https://travis-ci.org/github/Forty-Bot/u-boot/builds/689112153

--Sean