* 4.20-rc1 looks broken for UML
@ 2018-11-05 13:13 Anton Ivanov
2018-11-05 15:22 ` Anton Ivanov
0 siblings, 1 reply; 17+ messages in thread
From: Anton Ivanov @ 2018-11-05 13:13 UTC (permalink / raw)
To: linux-um; +Cc: Richard Weinberger
Hi all,
Looks like 4.20-rc1 is broken for us. It is not one of our changes, I
went through them again on top of 4.19 and they test out fine
A.
_______________________________________________
linux-um mailing list
linux-um@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-um
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: 4.20-rc1 looks broken for UML
2018-11-05 13:13 4.20-rc1 looks broken for UML Anton Ivanov
@ 2018-11-05 15:22 ` Anton Ivanov
2018-11-05 22:07 ` Richard Weinberger
0 siblings, 1 reply; 17+ messages in thread
From: Anton Ivanov @ 2018-11-05 15:22 UTC (permalink / raw)
To: linux-um; +Cc: Richard Weinberger
This looks like something specific to ttys - the io there gets
corruption and/or hangs.
I cannot reproduce it when I ssh in.
It does not look like it is the new write IRQ bugfix - that works fine
over 4.19.
Still debugging...
A.
On 11/5/18 1:13 PM, Anton Ivanov wrote:
> Hi all,
>
> Looks like 4.20-rc1 is broken for us. It is not one of our changes, I
> went through them again on top of 4.19 and they test out fine
>
> A.
>
_______________________________________________
linux-um mailing list
linux-um@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-um
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: 4.20-rc1 looks broken for UML
2018-11-05 15:22 ` Anton Ivanov
@ 2018-11-05 22:07 ` Richard Weinberger
2018-11-06 7:03 ` Anton Ivanov
2018-11-06 15:00 ` Anton Ivanov
0 siblings, 2 replies; 17+ messages in thread
From: Richard Weinberger @ 2018-11-05 22:07 UTC (permalink / raw)
To: Anton Ivanov; +Cc: linux-um
Anton,
Am Montag, 5. November 2018, 16:22:36 CET schrieb Anton Ivanov:
> This looks like something specific to ttys - the io there gets
> corruption and/or hangs.
>
> I cannot reproduce it when I ssh in.
>
> It does not look like it is the new write IRQ bugfix - that works fine
> over 4.19.
>
> Still debugging...
Hmm, I don't see this with my Debian userspace.
What exactly is your setup/config?
Thanks,
//richard
_______________________________________________
linux-um mailing list
linux-um@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-um
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: 4.20-rc1 looks broken for UML
2018-11-05 22:07 ` Richard Weinberger
@ 2018-11-06 7:03 ` Anton Ivanov
2018-11-06 15:00 ` Anton Ivanov
1 sibling, 0 replies; 17+ messages in thread
From: Anton Ivanov @ 2018-11-06 7:03 UTC (permalink / raw)
To: Richard Weinberger; +Cc: linux-um
On 05/11/2018 22:07, Richard Weinberger wrote:
> Anton,
>
> Am Montag, 5. November 2018, 16:22:36 CET schrieb Anton Ivanov:
>> This looks like something specific to ttys - the io there gets
>> corruption and/or hangs.
>>
>> I cannot reproduce it when I ssh in.
>>
>> It does not look like it is the new write IRQ bugfix - that works fine
>> over 4.19.
>>
>> Still debugging...
> Hmm, I don't see this with my Debian userspace.
> What exactly is your setup/config?
Debian stretch + the openswitch runtime. Works fine with 4.19 and worked
fine since 4.14.
The test is to cat something big to the terminal. If you just run it
with xterm it does not show up 95% of the cases. In fact you may never
notice it.
I use the changelog from dimngr (/usr/share/doc/dirmng/changelog.gz) for
that purpose. It is 768k once it has been gunzipped. Any large text file
(a few 100k) will do.
If you cat that with 4.20-rc1 using xterm you get terminal corruption -
garbage shows up in the input buffer. Similar story with stdio fd
console, but much easier to reproduce and the console can even hang
during boot.
For comparison purposes, a console in plain 4.19 without the write IRQ
fix will hang on that test (not always, it may take a couple of runs).
With the IRQ fix it is stable - you can run it in a loop 24x7.
My config follows:
#
# Automatically generated file; DO NOT EDIT.
# Linux/um 4.20.0-rc1 Kernel Configuration
#
#
# Compiler: gcc (Debian 6.3.0-18+deb9u1) 6.3.0 20170516
#
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=60300
CONFIG_CLANG_VERSION=0
CONFIG_IRQ_WORK=y
#
# General setup
#
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=128
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_BUILD_SALT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_USELIB is not set
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_SHOW=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
CONFIG_GENERIC_CLOCKEVENTS=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
CONFIG_PREEMPT_NONE=y
#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
# CONFIG_PSI is not set
#
# RCU Subsystem
#
CONFIG_TINY_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TINY_SRCU=y
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_CGROUPS=y
# CONFIG_MEMCG is not set
CONFIG_BLK_CGROUP=y
# CONFIG_DEBUG_BLK_CGROUP is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_CGROUP_PIDS=y
# CONFIG_CGROUP_RDMA is not set
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
CONFIG_NET_NS=y
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_BPF=y
# CONFIG_EXPERT is not set
CONFIG_UID16=y
CONFIG_MULTIUSER=y
CONFIG_SYSFS_SYSCALL=y
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_HAVE_FUTEX_CMPXCHG=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
# CONFIG_BPF_SYSCALL is not set
CONFIG_USERFAULTFD=y
# CONFIG_EMBEDDED is not set
#
# Kernel Performance Events And Counters
#
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
CONFIG_SLAB_MERGE_DEFAULT=y
# CONFIG_SLAB_FREELIST_RANDOM is not set
# CONFIG_PROFILING is not set
#
# UML-specific options
#
CONFIG_UML=y
CONFIG_MMU=y
CONFIG_NO_IOMEM=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_HZ=100
CONFIG_NR_CPUS=1
#
# Host processor type and features
#
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_HYGON=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_UML_X86=y
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_ARCH_DEFCONFIG="arch/um/configs/x86_64_defconfig"
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_3_LEVEL_PGTABLES=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_STATIC_LINK=y
CONFIG_LD_SCRIPT_STATIC=y
CONFIG_HOSTFS=y
CONFIG_MCONSOLE=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_KERNEL_STACK_ORDER=1
# CONFIG_MMAPPER is not set
CONFIG_NO_DMA=y
CONFIG_PGTABLE_LEVELS=3
CONFIG_SECCOMP=y
#
# UML Character Devices
#
CONFIG_STDERR_CONSOLE=y
CONFIG_SSL=y
CONFIG_NULL_CHAN=y
CONFIG_PORT_CHAN=y
CONFIG_PTY_CHAN=y
CONFIG_TTY_CHAN=y
CONFIG_XTERM_CHAN=y
CONFIG_CON_ZERO_CHAN="fd:0,fd:1"
CONFIG_CON_CHAN="xterm"
CONFIG_SSL_CHAN="pts"
CONFIG_UML_SOUND=y
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_HOSTAUDIO=y
#
# UML Network Devices
#
CONFIG_UML_NET=y
CONFIG_UML_NET_ETHERTAP=y
CONFIG_UML_NET_TUNTAP=y
CONFIG_UML_NET_SLIP=y
CONFIG_UML_NET_DAEMON=y
CONFIG_UML_NET_VECTOR=y
# CONFIG_UML_NET_VDE is not set
CONFIG_UML_NET_MCAST=y
# CONFIG_UML_NET_PCAP is not set
CONFIG_UML_NET_SLIRP=y
#
# General architecture-dependent options
#
CONFIG_CRASH_CORE=y
CONFIG_HAVE_64BIT_ALIGNED_ACCESS=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_ARCH_NO_PREEMPT=y
# CONFIG_REFCOUNT_FULL is not set
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_PLUGIN_HOSTCC=""
CONFIG_HAVE_GCC_PLUGINS=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
CONFIG_MODULE_COMPRESS=y
CONFIG_MODULE_COMPRESS_GZIP=y
# CONFIG_MODULE_COMPRESS_XZ is not set
# CONFIG_TRIM_UNUSED_KSYMS is not set
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BLK_DEV_ZONED is not set
# CONFIG_BLK_DEV_THROTTLING is not set
# CONFIG_BLK_CMDLINE_PARSER is not set
# CONFIG_BLK_WBT is not set
# CONFIG_BLK_CGROUP_IOLATENCY is not set
CONFIG_BLK_DEBUG_FS=y
# CONFIG_BLK_SED_OPAL is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_EFI_PARTITION=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_CFQ_GROUP_IOSCHED is not set
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_MQ_IOSCHED_KYBER=y
# CONFIG_IOSCHED_BFQ is not set
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_FREEZER=y
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=y
#
# Memory Management options
#
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_NEED_PER_CPU_KM=y
# CONFIG_CLEANCACHE is not set
# CONFIG_FRONTSWAP is not set
# CONFIG_CMA is not set
CONFIG_ZPOOL=y
# CONFIG_ZBUD is not set
# CONFIG_Z3FOLD is not set
CONFIG_ZSMALLOC=y
# CONFIG_PGTABLE_MAPPING is not set
# CONFIG_ZSMALLOC_STAT is not set
CONFIG_IDLE_PAGE_TRACKING=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_BENCHMARK is not set
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=y
CONFIG_UNIX=y
CONFIG_UNIX_DIAG=y
# CONFIG_TLS is not set
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_INTERFACE is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_ROUTE_CLASSID=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
CONFIG_NET_IP_TUNNEL=y
CONFIG_SYN_COOKIES=y
# CONFIG_NET_IPVTI is not set
# CONFIG_NET_FOU is not set
# CONFIG_NET_FOU_IP_TUNNELS is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_INET_UDP_DIAG=y
# CONFIG_INET_RAW_DIAG is not set
# CONFIG_INET_DIAG_DESTROY is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_IPV6_ILA is not set
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
# CONFIG_IPV6_VTI is not set
CONFIG_IPV6_SIT=y
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_IPV6_SEG6_LWTUNNEL is not set
# CONFIG_IPV6_SEG6_HMAC is not set
# CONFIG_NETLABEL is not set
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=m
#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_INGRESS is not set
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_FAMILY_BRIDGE=y
CONFIG_NETFILTER_FAMILY_ARP=y
CONFIG_NETFILTER_NETLINK_ACCT=y
CONFIG_NETFILTER_NETLINK_QUEUE=y
CONFIG_NETFILTER_NETLINK_LOG=y
CONFIG_NETFILTER_NETLINK_OSF=y
CONFIG_NF_CONNTRACK=y
CONFIG_NF_LOG_COMMON=y
# CONFIG_NF_LOG_NETDEV is not set
CONFIG_NETFILTER_CONNCOUNT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
# CONFIG_NF_CONNTRACK_ZONES is not set
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CONNTRACK_TIMEOUT=y
CONFIG_NF_CONNTRACK_TIMESTAMP=y
CONFIG_NF_CONNTRACK_LABELS=y
CONFIG_NF_CT_PROTO_DCCP=y
CONFIG_NF_CT_PROTO_GRE=y
CONFIG_NF_CT_PROTO_SCTP=y
CONFIG_NF_CT_PROTO_UDPLITE=y
CONFIG_NF_CONNTRACK_AMANDA=y
CONFIG_NF_CONNTRACK_FTP=y
CONFIG_NF_CONNTRACK_H323=y
CONFIG_NF_CONNTRACK_IRC=y
CONFIG_NF_CONNTRACK_BROADCAST=y
CONFIG_NF_CONNTRACK_NETBIOS_NS=y
CONFIG_NF_CONNTRACK_SNMP=y
CONFIG_NF_CONNTRACK_PPTP=y
CONFIG_NF_CONNTRACK_SANE=y
CONFIG_NF_CONNTRACK_SIP=y
CONFIG_NF_CONNTRACK_TFTP=y
CONFIG_NF_CT_NETLINK=y
CONFIG_NF_CT_NETLINK_TIMEOUT=y
# CONFIG_NETFILTER_NETLINK_GLUE_CT is not set
CONFIG_NF_NAT=y
CONFIG_NF_NAT_NEEDED=y
CONFIG_NF_NAT_PROTO_DCCP=y
CONFIG_NF_NAT_PROTO_UDPLITE=y
CONFIG_NF_NAT_PROTO_SCTP=y
CONFIG_NF_NAT_AMANDA=y
CONFIG_NF_NAT_FTP=y
CONFIG_NF_NAT_IRC=y
CONFIG_NF_NAT_SIP=y
CONFIG_NF_NAT_TFTP=y
CONFIG_NF_NAT_REDIRECT=y
CONFIG_NETFILTER_SYNPROXY=y
CONFIG_NF_TABLES=y
# CONFIG_NF_TABLES_SET is not set
CONFIG_NF_TABLES_INET=y
# CONFIG_NF_TABLES_NETDEV is not set
# CONFIG_NFT_NUMGEN is not set
CONFIG_NFT_CT=y
CONFIG_NFT_COUNTER=y
# CONFIG_NFT_CONNLIMIT is not set
CONFIG_NFT_LOG=y
CONFIG_NFT_LIMIT=y
CONFIG_NFT_MASQ=y
# CONFIG_NFT_REDIR is not set
CONFIG_NFT_NAT=y
# CONFIG_NFT_TUNNEL is not set
# CONFIG_NFT_OBJREF is not set
# CONFIG_NFT_QUEUE is not set
# CONFIG_NFT_QUOTA is not set
CONFIG_NFT_REJECT=y
CONFIG_NFT_REJECT_INET=y
# CONFIG_NFT_COMPAT is not set
CONFIG_NFT_HASH=y
# CONFIG_NFT_XFRM is not set
# CONFIG_NFT_SOCKET is not set
# CONFIG_NFT_OSF is not set
# CONFIG_NFT_TPROXY is not set
CONFIG_NETFILTER_XTABLES=y
#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=y
CONFIG_NETFILTER_XT_CONNMARK=y
# CONFIG_NETFILTER_XT_SET is not set
#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_AUDIT=y
# CONFIG_NETFILTER_XT_TARGET_CHECKSUM is not set
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y
CONFIG_NETFILTER_XT_TARGET_CONNMARK=y
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
# CONFIG_NETFILTER_XT_TARGET_CT is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
CONFIG_NETFILTER_XT_TARGET_HL=y
CONFIG_NETFILTER_XT_TARGET_HMARK=y
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=y
CONFIG_NETFILTER_XT_TARGET_LOG=y
CONFIG_NETFILTER_XT_TARGET_MARK=y
CONFIG_NETFILTER_XT_NAT=y
CONFIG_NETFILTER_XT_TARGET_NETMAP=y
CONFIG_NETFILTER_XT_TARGET_NFLOG=y
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=y
# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
CONFIG_NETFILTER_XT_TARGET_RATEEST=y
CONFIG_NETFILTER_XT_TARGET_REDIRECT=y
CONFIG_NETFILTER_XT_TARGET_TEE=y
# CONFIG_NETFILTER_XT_TARGET_TPROXY is not set
# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
CONFIG_NETFILTER_XT_TARGET_SECMARK=y
CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=y
CONFIG_NETFILTER_XT_MATCH_BPF=y
CONFIG_NETFILTER_XT_MATCH_CGROUP=y
CONFIG_NETFILTER_XT_MATCH_CLUSTER=y
CONFIG_NETFILTER_XT_MATCH_COMMENT=y
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=y
CONFIG_NETFILTER_XT_MATCH_CONNLABEL=y
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=y
CONFIG_NETFILTER_XT_MATCH_CONNMARK=y
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
CONFIG_NETFILTER_XT_MATCH_CPU=y
CONFIG_NETFILTER_XT_MATCH_DCCP=y
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=y
CONFIG_NETFILTER_XT_MATCH_DSCP=y
CONFIG_NETFILTER_XT_MATCH_ECN=y
CONFIG_NETFILTER_XT_MATCH_ESP=y
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=y
CONFIG_NETFILTER_XT_MATCH_HELPER=y
CONFIG_NETFILTER_XT_MATCH_HL=y
CONFIG_NETFILTER_XT_MATCH_IPCOMP=y
CONFIG_NETFILTER_XT_MATCH_IPRANGE=y
CONFIG_NETFILTER_XT_MATCH_L2TP=y
CONFIG_NETFILTER_XT_MATCH_LENGTH=y
CONFIG_NETFILTER_XT_MATCH_LIMIT=y
CONFIG_NETFILTER_XT_MATCH_MAC=y
CONFIG_NETFILTER_XT_MATCH_MARK=y
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
CONFIG_NETFILTER_XT_MATCH_NFACCT=y
CONFIG_NETFILTER_XT_MATCH_OSF=y
CONFIG_NETFILTER_XT_MATCH_OWNER=y
CONFIG_NETFILTER_XT_MATCH_POLICY=y
# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y
CONFIG_NETFILTER_XT_MATCH_QUOTA=y
CONFIG_NETFILTER_XT_MATCH_RATEEST=y
CONFIG_NETFILTER_XT_MATCH_REALM=y
CONFIG_NETFILTER_XT_MATCH_RECENT=y
CONFIG_NETFILTER_XT_MATCH_SCTP=y
# CONFIG_NETFILTER_XT_MATCH_SOCKET is not set
CONFIG_NETFILTER_XT_MATCH_STATE=y
CONFIG_NETFILTER_XT_MATCH_STATISTIC=y
CONFIG_NETFILTER_XT_MATCH_STRING=y
CONFIG_NETFILTER_XT_MATCH_TCPMSS=y
CONFIG_NETFILTER_XT_MATCH_TIME=y
CONFIG_NETFILTER_XT_MATCH_U32=y
CONFIG_IP_SET=y
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=y
CONFIG_IP_SET_BITMAP_IPMAC=y
CONFIG_IP_SET_BITMAP_PORT=y
CONFIG_IP_SET_HASH_IP=y
CONFIG_IP_SET_HASH_IPMARK=y
CONFIG_IP_SET_HASH_IPPORT=y
CONFIG_IP_SET_HASH_IPPORTIP=y
CONFIG_IP_SET_HASH_IPPORTNET=y
# CONFIG_IP_SET_HASH_IPMAC is not set
CONFIG_IP_SET_HASH_MAC=y
CONFIG_IP_SET_HASH_NETPORTNET=y
CONFIG_IP_SET_HASH_NET=y
CONFIG_IP_SET_HASH_NETNET=y
CONFIG_IP_SET_HASH_NETPORT=y
CONFIG_IP_SET_HASH_NETIFACE=y
CONFIG_IP_SET_LIST_SET=y
# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=y
# CONFIG_NF_SOCKET_IPV4 is not set
# CONFIG_NF_TPROXY_IPV4 is not set
CONFIG_NF_TABLES_IPV4=y
CONFIG_NFT_CHAIN_ROUTE_IPV4=y
CONFIG_NFT_REJECT_IPV4=y
CONFIG_NFT_DUP_IPV4=y
# CONFIG_NFT_FIB_IPV4 is not set
CONFIG_NF_TABLES_ARP=y
CONFIG_NF_DUP_IPV4=y
CONFIG_NF_LOG_ARP=y
CONFIG_NF_LOG_IPV4=y
CONFIG_NF_REJECT_IPV4=y
CONFIG_NF_NAT_IPV4=y
CONFIG_NF_NAT_MASQUERADE_IPV4=y
CONFIG_NFT_CHAIN_NAT_IPV4=y
CONFIG_NFT_MASQ_IPV4=y
CONFIG_NF_NAT_SNMP_BASIC=y
CONFIG_NF_NAT_PROTO_GRE=y
CONFIG_NF_NAT_PPTP=y
CONFIG_NF_NAT_H323=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_AH=y
CONFIG_IP_NF_MATCH_ECN=y
# CONFIG_IP_NF_MATCH_RPFILTER is not set
CONFIG_IP_NF_MATCH_TTL=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_SYNPROXY=y
CONFIG_IP_NF_NAT=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_IP_NF_TARGET_NETMAP=y
CONFIG_IP_NF_TARGET_REDIRECT=y
CONFIG_IP_NF_MANGLE=y
CONFIG_IP_NF_TARGET_CLUSTERIP=y
CONFIG_IP_NF_TARGET_ECN=y
CONFIG_IP_NF_TARGET_TTL=y
CONFIG_IP_NF_RAW=y
CONFIG_IP_NF_SECURITY=y
CONFIG_IP_NF_ARPTABLES=y
CONFIG_IP_NF_ARPFILTER=y
CONFIG_IP_NF_ARP_MANGLE=y
#
# IPv6: Netfilter Configuration
#
# CONFIG_NF_SOCKET_IPV6 is not set
# CONFIG_NF_TPROXY_IPV6 is not set
CONFIG_NF_TABLES_IPV6=y
CONFIG_NFT_CHAIN_ROUTE_IPV6=y
CONFIG_NFT_CHAIN_NAT_IPV6=y
CONFIG_NFT_MASQ_IPV6=y
CONFIG_NFT_REJECT_IPV6=y
CONFIG_NFT_DUP_IPV6=y
# CONFIG_NFT_FIB_IPV6 is not set
CONFIG_NF_DUP_IPV6=y
CONFIG_NF_REJECT_IPV6=y
CONFIG_NF_LOG_IPV6=y
CONFIG_NF_NAT_IPV6=y
CONFIG_NF_NAT_MASQUERADE_IPV6=y
CONFIG_IP6_NF_IPTABLES=y
CONFIG_IP6_NF_MATCH_AH=y
CONFIG_IP6_NF_MATCH_EUI64=y
CONFIG_IP6_NF_MATCH_FRAG=y
CONFIG_IP6_NF_MATCH_OPTS=y
CONFIG_IP6_NF_MATCH_HL=y
CONFIG_IP6_NF_MATCH_IPV6HEADER=y
CONFIG_IP6_NF_MATCH_MH=y
# CONFIG_IP6_NF_MATCH_RPFILTER is not set
CONFIG_IP6_NF_MATCH_RT=y
# CONFIG_IP6_NF_MATCH_SRH is not set
# CONFIG_IP6_NF_TARGET_HL is not set
CONFIG_IP6_NF_FILTER=y
CONFIG_IP6_NF_TARGET_REJECT=y
CONFIG_IP6_NF_TARGET_SYNPROXY=y
CONFIG_IP6_NF_MANGLE=y
CONFIG_IP6_NF_RAW=y
CONFIG_IP6_NF_SECURITY=y
CONFIG_IP6_NF_NAT=y
CONFIG_IP6_NF_TARGET_MASQUERADE=y
CONFIG_IP6_NF_TARGET_NPT=y
CONFIG_NF_DEFRAG_IPV6=y
CONFIG_NF_TABLES_BRIDGE=y
CONFIG_NFT_BRIDGE_REJECT=y
CONFIG_NF_LOG_BRIDGE=y
CONFIG_BRIDGE_NF_EBTABLES=y
CONFIG_BRIDGE_EBT_BROUTE=y
CONFIG_BRIDGE_EBT_T_FILTER=y
CONFIG_BRIDGE_EBT_T_NAT=y
CONFIG_BRIDGE_EBT_802_3=y
CONFIG_BRIDGE_EBT_AMONG=y
CONFIG_BRIDGE_EBT_ARP=y
CONFIG_BRIDGE_EBT_IP=y
CONFIG_BRIDGE_EBT_IP6=y
CONFIG_BRIDGE_EBT_LIMIT=y
CONFIG_BRIDGE_EBT_MARK=y
CONFIG_BRIDGE_EBT_PKTTYPE=y
CONFIG_BRIDGE_EBT_STP=y
CONFIG_BRIDGE_EBT_VLAN=y
CONFIG_BRIDGE_EBT_ARPREPLY=y
CONFIG_BRIDGE_EBT_DNAT=y
CONFIG_BRIDGE_EBT_MARK_T=y
CONFIG_BRIDGE_EBT_REDIRECT=y
CONFIG_BRIDGE_EBT_SNAT=y
CONFIG_BRIDGE_EBT_LOG=y
CONFIG_BRIDGE_EBT_NFLOG=y
# CONFIG_BPFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
CONFIG_STP=y
CONFIG_BRIDGE=y
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_HAVE_NET_DSA=y
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_6LOWPAN is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFB=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
# CONFIG_NET_SCH_CBS is not set
# CONFIG_NET_SCH_ETF is not set
# CONFIG_NET_SCH_TAPRIO is not set
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_MQPRIO=m
# CONFIG_NET_SCH_SKBPRIO is not set
CONFIG_NET_SCH_CHOKE=m
CONFIG_NET_SCH_QFQ=m
CONFIG_NET_SCH_CODEL=m
CONFIG_NET_SCH_FQ_CODEL=m
# CONFIG_NET_SCH_CAKE is not set
CONFIG_NET_SCH_FQ=m
CONFIG_NET_SCH_HHF=m
CONFIG_NET_SCH_PIE=m
# CONFIG_NET_SCH_INGRESS is not set
CONFIG_NET_SCH_PLUG=m
# CONFIG_NET_SCH_DEFAULT is not set
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_PERF is not set
# CONFIG_CLS_U32_MARK is not set
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=m
CONFIG_NET_CLS_BPF=m
CONFIG_NET_CLS_FLOWER=m
CONFIG_NET_CLS_MATCHALL=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_EMATCH_IPSET=m
# CONFIG_NET_EMATCH_IPT is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_SAMPLE=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
# CONFIG_NET_ACT_SKBEDIT is not set
CONFIG_NET_ACT_CSUM=m
CONFIG_NET_ACT_VLAN=m
CONFIG_NET_ACT_BPF=m
CONFIG_NET_ACT_CONNMARK=m
CONFIG_NET_ACT_SKBMOD=m
CONFIG_NET_ACT_IFE=m
CONFIG_NET_ACT_TUNNEL_KEY=m
CONFIG_NET_IFE_SKBMARK=m
CONFIG_NET_IFE_SKBPRIO=m
CONFIG_NET_IFE_SKBTCINDEX=m
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=m
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
# CONFIG_VSOCKETS is not set
# CONFIG_NETLINK_DIAG is not set
# CONFIG_MPLS is not set
# CONFIG_NET_NSH is not set
# CONFIG_HSR is not set
# CONFIG_NET_SWITCHDEV is not set
# CONFIG_NET_L3_MASTER_DEV is not set
# CONFIG_NET_NCSI is not set
# CONFIG_CGROUP_NET_PRIO is not set
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
CONFIG_PSAMPLE=m
CONFIG_NET_IFE=m
# CONFIG_LWTUNNEL is not set
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
# CONFIG_NET_DEVLINK is not set
CONFIG_MAY_USE_DEVLINK=y
# CONFIG_FAILOVER is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER is not set
CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
CONFIG_GENERIC_CPU_DEVICES=y
#
# Bus devices
#
# CONFIG_CONNECTOR is not set
# CONFIG_GNSS is not set
# CONFIG_MTD is not set
# CONFIG_OF is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_NULL_BLK is not set
CONFIG_ZRAM=y
# CONFIG_ZRAM_WRITEBACK is not set
# CONFIG_ZRAM_MEMORY_TRACKING is not set
CONFIG_BLK_DEV_UBD=y
# CONFIG_BLK_DEV_UBD_SYNC is not set
CONFIG_BLK_DEV_COW_COMMON=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=4
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_RBD is not set
#
# NVME Support
#
#
# Misc devices
#
# CONFIG_DUMMY_IRQ is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_93CX6 is not set
#
# Texas Instruments shared transport line discipline
#
#
# Altera FPGA firmware download module (requires I2C)
#
#
# Intel MIC & related support
#
#
# Intel MIC Bus Driver
#
#
# SCIF Bus Driver
#
#
# VOP Bus Driver
#
#
# Intel MIC Host Driver
#
#
# Intel MIC Card Driver
#
#
# SCIF Driver
#
#
# Intel MIC Coprocessor State Management (COSM) Drivers
#
#
# VOP Driver
#
# CONFIG_ECHO is not set
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
# CONFIG_BCACHE is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
CONFIG_DM_BUFIO=y
# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set
CONFIG_DM_BIO_PRISON=y
CONFIG_DM_PERSISTENT_DATA=y
# CONFIG_DM_UNSTRIPED is not set
CONFIG_DM_CRYPT=y
CONFIG_DM_SNAPSHOT=y
CONFIG_DM_THIN_PROVISIONING=y
# CONFIG_DM_CACHE is not set
# CONFIG_DM_WRITECACHE is not set
# CONFIG_DM_ERA is not set
CONFIG_DM_MIRROR=y
# CONFIG_DM_LOG_USERSPACE is not set
# CONFIG_DM_RAID is not set
CONFIG_DM_ZERO=y
CONFIG_DM_MULTIPATH=y
CONFIG_DM_MULTIPATH_QL=y
CONFIG_DM_MULTIPATH_ST=y
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
# CONFIG_DM_FLAKEY is not set
# CONFIG_DM_VERITY is not set
# CONFIG_DM_SWITCH is not set
# CONFIG_DM_LOG_WRITES is not set
# CONFIG_DM_INTEGRITY is not set
# CONFIG_TARGET_CORE is not set
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
CONFIG_DUMMY=y
# CONFIG_EQUALIZER is not set
# CONFIG_IFB is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_IPVLAN is not set
# CONFIG_VXLAN is not set
# CONFIG_MACSEC is not set
# CONFIG_NETCONSOLE is not set
CONFIG_TUN=y
# CONFIG_TUN_VNET_CROSS_LE is not set
# CONFIG_VETH is not set
# CONFIG_NLMON is not set
#
# CAIF transport drivers
#
#
# Distributed Switch Architecture drivers
#
CONFIG_ETHERNET=y
CONFIG_NET_VENDOR_ALACRITECH=y
CONFIG_NET_VENDOR_AMAZON=y
CONFIG_NET_VENDOR_AQUANTIA=y
CONFIG_NET_VENDOR_ARC=y
# CONFIG_NET_VENDOR_AURORA is not set
CONFIG_NET_VENDOR_CAVIUM=y
CONFIG_NET_VENDOR_CORTINA=y
# CONFIG_NET_VENDOR_EZCHIP is not set
CONFIG_NET_VENDOR_HUAWEI=y
CONFIG_NET_VENDOR_I825XX=y
CONFIG_NET_VENDOR_INTEL=y
CONFIG_NET_VENDOR_MARVELL=y
CONFIG_NET_VENDOR_MICROCHIP=y
CONFIG_NET_VENDOR_MICROSEMI=y
CONFIG_NET_VENDOR_NATSEMI=y
CONFIG_NET_VENDOR_NETRONOME=y
CONFIG_NET_VENDOR_NI=y
CONFIG_NET_VENDOR_8390=y
# CONFIG_NET_VENDOR_QUALCOMM is not set
# CONFIG_NET_VENDOR_RENESAS is not set
# CONFIG_NET_VENDOR_ROCKER is not set
# CONFIG_NET_VENDOR_SAMSUNG is not set
CONFIG_NET_VENDOR_SOLARFLARE=y
CONFIG_NET_VENDOR_SOCIONEXT=y
CONFIG_NET_VENDOR_SYNOPSYS=y
CONFIG_NET_VENDOR_VIA=y
# CONFIG_MDIO_DEVICE is not set
# CONFIG_PHYLIB is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
#
# Host-side USB support is needed for USB Network Adapter support
#
# CONFIG_WLAN is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
# CONFIG_NETDEVSIM is not set
# CONFIG_NET_FAILOVER is not set
# CONFIG_NVM is not set
#
# Character devices
#
CONFIG_TTY=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=32
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
CONFIG_DEVMEM=y
CONFIG_DEVKMEM=y
# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_HW_RANDOM is not set
CONFIG_UML_RANDOM=y
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
#
# I2C support
#
# CONFIG_I2C is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
# CONFIG_PPS is not set
#
# PTP clock support
#
# CONFIG_PTP_1588_CLOCK is not set
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# CONFIG_PINCTRL is not set
# CONFIG_GPIOLIB is not set
# CONFIG_POWER_AVS is not set
# CONFIG_POWER_RESET is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
# CONFIG_REGULATOR is not set
#
# Graphics support
#
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_UWB is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
#
# DMABUF options
#
# CONFIG_SYNC_FILE is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO_MENU=y
#
# Microsoft Hyper-V guest support
#
# CONFIG_STAGING is not set
# CONFIG_HWSPINLOCK is not set
#
# Clock Source drivers
#
# CONFIG_MAILBOX is not set
CONFIG_IOMMU_SUPPORT=y
#
# Generic IOMMU Pagetable Support
#
# CONFIG_IOMMU_DEBUGFS is not set
#
# Remoteproc drivers
#
#
# Rpmsg drivers
#
# CONFIG_SOUNDWIRE is not set
#
# SOC (System On Chip) specific Drivers
#
#
# Amlogic SoC drivers
#
#
# Broadcom SoC drivers
#
#
# NXP/Freescale QorIQ SoC drivers
#
#
# i.MX SoC drivers
#
#
# Qualcomm SoC drivers
#
# CONFIG_SOC_TI is not set
#
# Xilinx SoC drivers
#
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_PWM is not set
#
# IRQ chip support
#
CONFIG_ARM_GIC_MAX_NR=1
# CONFIG_RESET_CONTROLLER is not set
# CONFIG_FMC is not set
#
# PHY Subsystem
#
# CONFIG_GENERIC_PHY is not set
# CONFIG_POWERCAP is not set
# CONFIG_RAS is not set
#
# Android
#
# CONFIG_ANDROID is not set
CONFIG_DAX=y
# CONFIG_NVMEM is not set
#
# HW tracing support
#
# CONFIG_STM is not set
# CONFIG_FPGA is not set
# CONFIG_SIOX is not set
# CONFIG_SLIMBUS is not set
#
# File systems
#
CONFIG_FS_IOMAP=y
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT2=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_ENCRYPTION is not set
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
CONFIG_BTRFS_FS=y
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
# CONFIG_BTRFS_FS_REF_VERIFY is not set
# CONFIG_NILFS2_FS is not set
# CONFIG_F2FS_FS is not set
# CONFIG_FS_DAX is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
CONFIG_FILE_LOCKING=y
CONFIG_MANDATORY_FILE_LOCKING=y
# CONFIG_FS_ENCRYPTION is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
CONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=y
CONFIG_AUTOFS_FS=y
CONFIG_FUSE_FS=y
CONFIG_CUSE=y
CONFIG_OVERLAY_FS=y
# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set
CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y
# CONFIG_OVERLAY_FS_INDEX is not set
# CONFIG_OVERLAY_FS_XINO_AUTO is not set
# CONFIG_OVERLAY_FS_METACOPY is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=850
CONFIG_FAT_DEFAULT_IOCHARSET="utf-8"
# CONFIG_FAT_DEFAULT_UTF8 is not set
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_PROC_CHILDREN is not set
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_MEMFD_CREATE=y
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_UBIFS_FS_AUTHENTICATION is not set
# CONFIG_CRAMFS is not set
CONFIG_SQUASHFS=y
CONFIG_SQUASHFS_FILE_CACHE=y
# CONFIG_SQUASHFS_FILE_DIRECT is not set
CONFIG_SQUASHFS_DECOMP_SINGLE=y
# CONFIG_SQUASHFS_DECOMP_MULTI is not set
# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
CONFIG_SQUASHFS_LZ4=y
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
# CONFIG_SQUASHFS_ZSTD is not set
CONFIG_SQUASHFS_4K_DEVBLK_SIZE=y
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_PSTORE is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V2=m
CONFIG_NFS_V3=m
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=m
# CONFIG_NFS_SWAP is not set
CONFIG_NFS_V4_1=y
CONFIG_NFS_V4_2=y
CONFIG_PNFS_FILE_LAYOUT=m
CONFIG_PNFS_BLOCK=m
CONFIG_PNFS_FLEXFILE_LAYOUT=m
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
# CONFIG_NFS_V4_1_MIGRATION is not set
CONFIG_NFS_V4_SECURITY_LABEL=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
# CONFIG_NFSD_BLOCKLAYOUT is not set
# CONFIG_NFSD_SCSILAYOUT is not set
# CONFIG_NFSD_FLEXFILELAYOUT is not set
# CONFIG_NFSD_V4_SECURITY_LABEL is not set
# CONFIG_NFSD_FAULT_INJECTION is not set
CONFIG_GRACE_PERIOD=m
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_BACKCHANNEL=y
# CONFIG_SUNRPC_DEBUG is not set
# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf-8"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=y
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
CONFIG_NLS_UTF8=y
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_PERSISTENT_KEYRINGS is not set
# CONFIG_BIG_KEYS is not set
# CONFIG_ENCRYPTED_KEYS is not set
# CONFIG_KEY_DH_OPERATIONS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITY_WRITABLE_HOOKS=y
# CONFIG_SECURITYFS is not set
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
# CONFIG_SECURITY_PATH is not set
CONFIG_LSM_MMAP_MIN_ADDR=65536
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
# CONFIG_HARDENED_USERCOPY is not set
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_LOADPIN is not set
# CONFIG_SECURITY_YAMA is not set
CONFIG_INTEGRITY=y
# CONFIG_INTEGRITY_SIGNATURE is not set
CONFIG_INTEGRITY_AUDIT=y
# CONFIG_IMA is not set
# CONFIG_EVM is not set
CONFIG_DEFAULT_SECURITY_SELINUX=y
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_DEFAULT_SECURITY="selinux"
CONFIG_XOR_BLOCKS=y
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=m
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=m
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_RSA=m
# CONFIG_CRYPTO_DH is not set
# CONFIG_CRYPTO_ECDH is not set
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
# CONFIG_CRYPTO_AEGIS128 is not set
# CONFIG_CRYPTO_AEGIS128L is not set
# CONFIG_CRYPTO_AEGIS256 is not set
# CONFIG_CRYPTO_MORUS640 is not set
# CONFIG_CRYPTO_MORUS1280 is not set
# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_ECHAINIV=m
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CFB is not set
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
# CONFIG_CRYPTO_ECB is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_OFB is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_KEYWRAP is not set
#
# Hash modes
#
# CONFIG_CRYPTO_CMAC is not set
CONFIG_CRYPTO_HMAC=m
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32 is not set
# CONFIG_CRYPTO_CRCT10DIF is not set
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_POLY1305 is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
CONFIG_CRYPTO_SHA256=m
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_SHA3 is not set
# CONFIG_CRYPTO_SM3 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_TI is not set
# CONFIG_CRYPTO_AES_X86_64 is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_CHACHA20 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_SM4 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
CONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_842 is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set
# CONFIG_CRYPTO_ZSTD is not set
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_DRBG_MENU=m
CONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
CONFIG_CRYPTO_DRBG=m
CONFIG_CRYPTO_JITTERENTROPY=m
CONFIG_CRYPTO_USER_API=m
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
CONFIG_CRYPTO_USER_API_RNG=m
# CONFIG_CRYPTO_USER_API_AEAD is not set
# CONFIG_CRYPTO_STATS is not set
CONFIG_CRYPTO_HW=y
# CONFIG_ASYMMETRIC_KEY_TYPE is not set
#
# Certificates for signature checking
#
# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set
#
# Library routines
#
CONFIG_RAID6_PQ=y
CONFIG_BITREVERSE=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC64 is not set
# CONFIG_CRC4 is not set
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
# CONFIG_CRC8 is not set
CONFIG_XXHASH=y
CONFIG_AUDIT_GENERIC=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=y
CONFIG_TEXTSEARCH_BM=y
CONFIG_TEXTSEARCH_FSM=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_SGL_ALLOC=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
# CONFIG_CORDIC is not set
# CONFIG_DDR is not set
# CONFIG_IRQ_POLL is not set
CONFIG_MPILIB=m
CONFIG_OID_REGISTRY=m
CONFIG_STACKDEPOT=y
CONFIG_SBITMAP=y
# CONFIG_STRING_SELFTEST is not set
#
# Kernel hacking
#
#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_BOOT_PRINTK_DELAY is not set
CONFIG_DYNAMIC_DEBUG=y
#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_INFO_REDUCED is not set
# CONFIG_DEBUG_INFO_SPLIT is not set
CONFIG_DEBUG_INFO_DWARF4=y
CONFIG_GDB_SCRIPTS=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_READABLE_ASM=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_PAGE_OWNER=y
CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_FRAME_POINTER=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_DEBUG_KERNEL=y
#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
CONFIG_DEBUG_PAGEALLOC=y
# CONFIG_DEBUG_PAGEALLOC_ENABLE_DEFAULT is not set
CONFIG_PAGE_POISONING=y
# CONFIG_PAGE_POISONING_NO_SANITY is not set
# CONFIG_PAGE_POISONING_ZERO is not set
CONFIG_DEBUG_OBJECTS=y
# CONFIG_DEBUG_OBJECTS_SELFTEST is not set
CONFIG_DEBUG_OBJECTS_FREE=y
CONFIG_DEBUG_OBJECTS_TIMERS=y
CONFIG_DEBUG_OBJECTS_WORK=y
CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=y
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
CONFIG_DEBUG_SLAB=y
CONFIG_DEBUG_SLAB_LEAK=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_DEBUG_VM=y
CONFIG_DEBUG_VM_VMACACHE=y
CONFIG_DEBUG_VM_RB=y
# CONFIG_DEBUG_VM_PGFLAGS is not set
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
# CONFIG_KCOV is not set
# CONFIG_DEBUG_SHIRQ is not set
#
# Debug Lockups and Hangs
#
# CONFIG_SOFTLOCKUP_DETECTOR is not set
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_WQ_WATCHDOG is not set
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=30
CONFIG_SCHED_DEBUG=y
CONFIG_SCHED_INFO=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_SCHED_STACK_END_CHECK is not set
# CONFIG_DEBUG_TIMEKEEPING is not set
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_WW_MUTEX_SELFTEST is not set
CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_KOBJECT_RELEASE is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_PI_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
#
# RCU Debugging
#
# CONFIG_RCU_PERF_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_PREEMPTIRQ_EVENTS is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_HWLAT_TRACER is not set
# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_TRACER_SNAPSHOT is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_TRACEPOINT_BENCHMARK is not set
# CONFIG_PREEMPTIRQ_DELAY_TEST is not set
# CONFIG_DMA_API_DEBUG is not set
CONFIG_RUNTIME_TESTING_MENU=y
# CONFIG_LKDTM is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_TEST_SORT is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_PERCPU_TEST is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_TEST_HEXDUMP is not set
# CONFIG_TEST_STRING_HELPERS is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_TEST_PRINTF is not set
# CONFIG_TEST_BITMAP is not set
# CONFIG_TEST_BITFIELD is not set
# CONFIG_TEST_UUID is not set
# CONFIG_TEST_XARRAY is not set
# CONFIG_TEST_OVERFLOW is not set
# CONFIG_TEST_RHASHTABLE is not set
# CONFIG_TEST_HASH is not set
# CONFIG_TEST_IDA is not set
# CONFIG_TEST_LKM is not set
# CONFIG_TEST_USER_COPY is not set
# CONFIG_TEST_BPF is not set
# CONFIG_FIND_BIT_BENCHMARK is not set
# CONFIG_TEST_FIRMWARE is not set
# CONFIG_TEST_SYSCTL is not set
# CONFIG_TEST_UDELAY is not set
# CONFIG_TEST_STATIC_KEYS is not set
# CONFIG_TEST_KMOD is not set
# CONFIG_TEST_MEMCAT_P is not set
# CONFIG_MEMTEST is not set
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
# CONFIG_UBSAN is not set
# CONFIG_GPROF is not set
# CONFIG_GCOV is not set
CONFIG_EARLY_PRINTK=y
A.
>
> Thanks,
> //richard
>
>
>
> _______________________________________________
> linux-um mailing list
> linux-um@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-um
>
_______________________________________________
linux-um mailing list
linux-um@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-um
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: 4.20-rc1 looks broken for UML
2018-11-05 22:07 ` Richard Weinberger
2018-11-06 7:03 ` Anton Ivanov
@ 2018-11-06 15:00 ` Anton Ivanov
2018-11-06 15:07 ` Anton Ivanov
2018-11-06 17:04 ` Richard Weinberger
1 sibling, 2 replies; 17+ messages in thread
From: Anton Ivanov @ 2018-11-06 15:00 UTC (permalink / raw)
To: linux-um; +Cc: Richard Weinberger, grek
On 11/5/18 10:07 PM, Richard Weinberger wrote:
> Anton,
>
> Am Montag, 5. November 2018, 16:22:36 CET schrieb Anton Ivanov:
>> This looks like something specific to ttys - the io there gets
>> corruption and/or hangs.
>>
>> I cannot reproduce it when I ssh in.
>>
>> It does not look like it is the new write IRQ bugfix - that works fine
>> over 4.19.
>>
>> Still debugging...
> Hmm, I don't see this with my Debian userspace.
> What exactly is your setup/config?
Gotcha.
8ebfe885c65ec82a0b1e955cf99ed62664e84414 is the guilty party.
With it, I get tty corruption on UML. Any attempt to push a large amount
of data via the console results in spurious echoes or even a hang.
Reverting it fixes things.
Cc-ing Greg - it was merged from his tree.
I will try to figure out what exactly is wrong with it in the meantime.
On first reading it looked OK.
A
> Thanks,
> //richard
>
>
>
> _______________________________________________
> linux-um mailing list
> linux-um@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-um
>
_______________________________________________
linux-um mailing list
linux-um@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-um
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: 4.20-rc1 looks broken for UML
2018-11-06 15:00 ` Anton Ivanov
@ 2018-11-06 15:07 ` Anton Ivanov
2018-11-06 18:00 ` Lance Roy
2018-11-06 17:04 ` Richard Weinberger
1 sibling, 1 reply; 17+ messages in thread
From: Anton Ivanov @ 2018-11-06 15:07 UTC (permalink / raw)
To: linux-um; +Cc: gregkh, ldr709
Resend - got Greg's address wrong and missed the commit author. Apologies.
On 11/6/18 3:00 PM, Anton Ivanov wrote:
>
> On 11/5/18 10:07 PM, Richard Weinberger wrote:
>> Anton,
>>
>> Am Montag, 5. November 2018, 16:22:36 CET schrieb Anton Ivanov:
>>> This looks like something specific to ttys - the io there gets
>>> corruption and/or hangs.
>>>
>>> I cannot reproduce it when I ssh in.
>>>
>>> It does not look like it is the new write IRQ bugfix - that works fine
>>> over 4.19.
>>>
>>> Still debugging...
>> Hmm, I don't see this with my Debian userspace.
>> What exactly is your setup/config?
>
>
> Gotcha.
>
> 8ebfe885c65ec82a0b1e955cf99ed62664e84414 is the guilty party.
>
> With it, I get tty corruption on UML. Any attempt to push a large
> amount of data via the console results in spurious echoes or even a hang.
>
> Reverting it fixes things.
>
> Cc-ing Greg - it was merged from his tree.
>
> I will try to figure out what exactly is wrong with it in the
> meantime. On first reading it looked OK.
>
> A
>
>
>> Thanks,
>> //richard
>>
>>
>>
>> _______________________________________________
>> linux-um mailing list
>> linux-um@lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-um
>>
>
> _______________________________________________
> linux-um mailing list
> linux-um@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-um
>
_______________________________________________
linux-um mailing list
linux-um@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-um
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: 4.20-rc1 looks broken for UML
2018-11-06 15:00 ` Anton Ivanov
2018-11-06 15:07 ` Anton Ivanov
@ 2018-11-06 17:04 ` Richard Weinberger
2018-11-06 17:25 ` Anton Ivanov
2018-11-06 17:42 ` Anton Ivanov
1 sibling, 2 replies; 17+ messages in thread
From: Richard Weinberger @ 2018-11-06 17:04 UTC (permalink / raw)
To: Anton Ivanov; +Cc: gregkh, linux-um
Am Dienstag, 6. November 2018, 16:00:59 CET schrieb Anton Ivanov:
>
> On 11/5/18 10:07 PM, Richard Weinberger wrote:
> > Anton,
> >
> > Am Montag, 5. November 2018, 16:22:36 CET schrieb Anton Ivanov:
> >> This looks like something specific to ttys - the io there gets
> >> corruption and/or hangs.
> >>
> >> I cannot reproduce it when I ssh in.
> >>
> >> It does not look like it is the new write IRQ bugfix - that works fine
> >> over 4.19.
> >>
> >> Still debugging...
> > Hmm, I don't see this with my Debian userspace.
> > What exactly is your setup/config?
>
>
> Gotcha.
>
> 8ebfe885c65ec82a0b1e955cf99ed62664e84414 is the guilty party.
>
> With it, I get tty corruption on UML. Any attempt to push a large amount
> of data via the console results in spurious echoes or even a hang.
>
> Reverting it fixes things.
Really?!
This is "TTY: sn_console: Replace spin_is_locked() with spin_trylock()".
sn_console is "SGI Altix L1 serial console"...
Thanks,
//richard
_______________________________________________
linux-um mailing list
linux-um@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-um
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: 4.20-rc1 looks broken for UML
2018-11-06 17:04 ` Richard Weinberger
@ 2018-11-06 17:25 ` Anton Ivanov
2018-11-06 19:09 ` Anton Ivanov
2018-11-06 17:42 ` Anton Ivanov
1 sibling, 1 reply; 17+ messages in thread
From: Anton Ivanov @ 2018-11-06 17:25 UTC (permalink / raw)
To: Richard Weinberger; +Cc: gregkh, linux-um
On 06/11/2018 17:04, Richard Weinberger wrote:
> Am Dienstag, 6. November 2018, 16:00:59 CET schrieb Anton Ivanov:
>> On 11/5/18 10:07 PM, Richard Weinberger wrote:
>>> Anton,
>>>
>>> Am Montag, 5. November 2018, 16:22:36 CET schrieb Anton Ivanov:
>>>> This looks like something specific to ttys - the io there gets
>>>> corruption and/or hangs.
>>>>
>>>> I cannot reproduce it when I ssh in.
>>>>
>>>> It does not look like it is the new write IRQ bugfix - that works fine
>>>> over 4.19.
>>>>
>>>> Still debugging...
>>> Hmm, I don't see this with my Debian userspace.
>>> What exactly is your setup/config?
>>
>> Gotcha.
>>
>> 8ebfe885c65ec82a0b1e955cf99ed62664e84414 is the guilty party.
>>
>> With it, I get tty corruption on UML. Any attempt to push a large amount
>> of data via the console results in spurious echoes or even a hang.
>>
>> Reverting it fixes things.
> Really?!
> This is "TTY: sn_console: Replace spin_is_locked() with spin_trylock()".
> sn_console is "SGI Altix L1 serial console"...
OK. Then I am losing my mind.
No idea what is going on...
Going back and redoing all the tests starting from plain 4.20-rc1 and
onwards.
A.
>
> Thanks,
> //richard
>
>
>
_______________________________________________
linux-um mailing list
linux-um@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-um
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: 4.20-rc1 looks broken for UML
2018-11-06 17:04 ` Richard Weinberger
2018-11-06 17:25 ` Anton Ivanov
@ 2018-11-06 17:42 ` Anton Ivanov
1 sibling, 0 replies; 17+ messages in thread
From: Anton Ivanov @ 2018-11-06 17:42 UTC (permalink / raw)
To: Richard Weinberger; +Cc: gregkh, linux-um
On 11/6/18 5:04 PM, Richard Weinberger wrote:
> Am Dienstag, 6. November 2018, 16:00:59 CET schrieb Anton Ivanov:
>> On 11/5/18 10:07 PM, Richard Weinberger wrote:
>>> Anton,
>>>
>>> Am Montag, 5. November 2018, 16:22:36 CET schrieb Anton Ivanov:
>>>> This looks like something specific to ttys - the io there gets
>>>> corruption and/or hangs.
>>>>
>>>> I cannot reproduce it when I ssh in.
>>>>
>>>> It does not look like it is the new write IRQ bugfix - that works fine
>>>> over 4.19.
>>>>
>>>> Still debugging...
>>> Hmm, I don't see this with my Debian userspace.
>>> What exactly is your setup/config?
>>
>> Gotcha.
>>
>> 8ebfe885c65ec82a0b1e955cf99ed62664e84414 is the guilty party.
>>
>> With it, I get tty corruption on UML. Any attempt to push a large amount
>> of data via the console results in spurious echoes or even a hang.
>>
>> Reverting it fixes things.
> Really?!
> This is "TTY: sn_console: Replace spin_is_locked() with spin_trylock()".
> sn_console is "SGI Altix L1 serial console"...
Mea culpa.
I was going through the commits from the tty changes one by one and for
some reason things started working after reverting this one.
I cannot reproduce the original issue now with a totally clean build and
a clean image.
I am going back through my local tree and images to see what caused in
the first place.
For now it looks like 4.20-rc1 is OK.
A.
>
> Thanks,
> //richard
>
>
>
> _______________________________________________
> linux-um mailing list
> linux-um@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-um
>
_______________________________________________
linux-um mailing list
linux-um@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-um
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: 4.20-rc1 looks broken for UML
2018-11-06 15:07 ` Anton Ivanov
@ 2018-11-06 18:00 ` Lance Roy
2018-11-06 18:12 ` Anton Ivanov
0 siblings, 1 reply; 17+ messages in thread
From: Lance Roy @ 2018-11-06 18:00 UTC (permalink / raw)
To: Anton Ivanov; +Cc: gregkh, Paul McKenney, linux-um
CCing Paul McKenney. Any idea what I did wrong?
Thanks,
Lance
On Tue, Nov 06, 2018 at 03:07:17PM +0000, Anton Ivanov wrote:
> Resend - got Greg's address wrong and missed the commit author. Apologies.
>
> On 11/6/18 3:00 PM, Anton Ivanov wrote:
> >
> > On 11/5/18 10:07 PM, Richard Weinberger wrote:
> > > Anton,
> > >
> > > Am Montag, 5. November 2018, 16:22:36 CET schrieb Anton Ivanov:
> > > > This looks like something specific to ttys - the io there gets
> > > > corruption and/or hangs.
> > > >
> > > > I cannot reproduce it when I ssh in.
> > > >
> > > > It does not look like it is the new write IRQ bugfix - that works fine
> > > > over 4.19.
> > > >
> > > > Still debugging...
> > > Hmm, I don't see this with my Debian userspace.
> > > What exactly is your setup/config?
> >
> >
> > Gotcha.
> >
> > 8ebfe885c65ec82a0b1e955cf99ed62664e84414 is the guilty party.
> >
> > With it, I get tty corruption on UML. Any attempt to push a large amount
> > of data via the console results in spurious echoes or even a hang.
> >
> > Reverting it fixes things.
> >
> > Cc-ing Greg - it was merged from his tree.
> >
> > I will try to figure out what exactly is wrong with it in the meantime.
> > On first reading it looked OK.
> >
> > A
> >
> >
> > > Thanks,
> > > //richard
> > >
> > >
> > >
> > > _______________________________________________
> > > linux-um mailing list
> > > linux-um@lists.infradead.org
> > > http://lists.infradead.org/mailman/listinfo/linux-um
> > >
> >
> > _______________________________________________
> > linux-um mailing list
> > linux-um@lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-um
> >
_______________________________________________
linux-um mailing list
linux-um@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-um
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: 4.20-rc1 looks broken for UML
2018-11-06 18:00 ` Lance Roy
@ 2018-11-06 18:12 ` Anton Ivanov
0 siblings, 0 replies; 17+ messages in thread
From: Anton Ivanov @ 2018-11-06 18:12 UTC (permalink / raw)
To: Lance Roy; +Cc: gregkh, Paul McKenney, linux-um
On 11/6/18 6:00 PM, Lance Roy wrote:
> CCing Paul McKenney. Any idea what I did wrong?
Nothing, problem on my end. Something wrong with my setup and rolling
back your commit was a false-positive.
I apologize, please ignore. i will continue digging to try to figure out
what's wrong.
A.
>
> Thanks,
> Lance
>
> On Tue, Nov 06, 2018 at 03:07:17PM +0000, Anton Ivanov wrote:
>> Resend - got Greg's address wrong and missed the commit author. Apologies.
>>
>> On 11/6/18 3:00 PM, Anton Ivanov wrote:
>>> On 11/5/18 10:07 PM, Richard Weinberger wrote:
>>>> Anton,
>>>>
>>>> Am Montag, 5. November 2018, 16:22:36 CET schrieb Anton Ivanov:
>>>>> This looks like something specific to ttys - the io there gets
>>>>> corruption and/or hangs.
>>>>>
>>>>> I cannot reproduce it when I ssh in.
>>>>>
>>>>> It does not look like it is the new write IRQ bugfix - that works fine
>>>>> over 4.19.
>>>>>
>>>>> Still debugging...
>>>> Hmm, I don't see this with my Debian userspace.
>>>> What exactly is your setup/config?
>>>
>>> Gotcha.
>>>
>>> 8ebfe885c65ec82a0b1e955cf99ed62664e84414 is the guilty party.
>>>
>>> With it, I get tty corruption on UML. Any attempt to push a large amount
>>> of data via the console results in spurious echoes or even a hang.
>>>
>>> Reverting it fixes things.
>>>
>>> Cc-ing Greg - it was merged from his tree.
>>>
>>> I will try to figure out what exactly is wrong with it in the meantime.
>>> On first reading it looked OK.
>>>
>>> A
>>>
>>>
>>>> Thanks,
>>>> //richard
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> linux-um mailing list
>>>> linux-um@lists.infradead.org
>>>> http://lists.infradead.org/mailman/listinfo/linux-um
>>>>
>>> _______________________________________________
>>> linux-um mailing list
>>> linux-um@lists.infradead.org
>>> http://lists.infradead.org/mailman/listinfo/linux-um
>>>
_______________________________________________
linux-um mailing list
linux-um@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-um
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: 4.20-rc1 looks broken for UML
2018-11-06 17:25 ` Anton Ivanov
@ 2018-11-06 19:09 ` Anton Ivanov
2018-11-06 19:56 ` Richard Weinberger
0 siblings, 1 reply; 17+ messages in thread
From: Anton Ivanov @ 2018-11-06 19:09 UTC (permalink / raw)
To: linux-um, Richard Weinberger
On 11/6/18 5:25 PM, Anton Ivanov wrote:
> On 06/11/2018 17:04, Richard Weinberger wrote:
>> Am Dienstag, 6. November 2018, 16:00:59 CET schrieb Anton Ivanov:
>>> On 11/5/18 10:07 PM, Richard Weinberger wrote:
>>>> Anton,
>>>>
>>>> Am Montag, 5. November 2018, 16:22:36 CET schrieb Anton Ivanov:
>>>>> This looks like something specific to ttys - the io there gets
>>>>> corruption and/or hangs.
>>>>>
>>>>> I cannot reproduce it when I ssh in.
>>>>>
>>>>> It does not look like it is the new write IRQ bugfix - that works
>>>>> fine
>>>>> over 4.19.
>>>>>
>>>>> Still debugging...
>>>> Hmm, I don't see this with my Debian userspace.
>>>> What exactly is your setup/config?
>>>
>>> Gotcha.
>>>
>>> 8ebfe885c65ec82a0b1e955cf99ed62664e84414 is the guilty party.
>>>
>>> With it, I get tty corruption on UML. Any attempt to push a large
>>> amount
>>> of data via the console results in spurious echoes or even a hang.
>>>
>>> Reverting it fixes things.
>> Really?!
>> This is "TTY: sn_console: Replace spin_is_locked() with spin_trylock()".
>> sn_console is "SGI Altix L1 serial console"...
>
> OK. Then I am losing my mind.
Not fully. I stand by my earlier statement - 4.20-rc1 is not quite right.
The combination of debug options I had enabled hanged UML on boot with
4.20-rc1 made it hang on boot or produce the aforementioned corruption
on tty later.
Turning all debug off gives me a kernel which boots. However, it fails
later at some point either on networking or or on disk.
The same images boot cleanly with 4.14 to 4.19 +/- various fixes.
I am going to rebuild everything from scratch including new clean Debian
images tomorrow and start digging again.
A.
>
> No idea what is going on...
>
> Going back and redoing all the tests starting from plain 4.20-rc1 and
> onwards.
>
> A.
>
>
>>
>> Thanks,
>> //richard
>>
>>
>>
>
>
> _______________________________________________
> linux-um mailing list
> linux-um@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-um
>
_______________________________________________
linux-um mailing list
linux-um@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-um
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: 4.20-rc1 looks broken for UML
2018-11-06 19:09 ` Anton Ivanov
@ 2018-11-06 19:56 ` Richard Weinberger
2018-11-06 20:49 ` Richard Weinberger
0 siblings, 1 reply; 17+ messages in thread
From: Richard Weinberger @ 2018-11-06 19:56 UTC (permalink / raw)
To: Anton Ivanov; +Cc: linux-um
Anton,
Am Dienstag, 6. November 2018, 20:09:44 CET schrieb Anton Ivanov:
>
> On 11/6/18 5:25 PM, Anton Ivanov wrote:
> > On 06/11/2018 17:04, Richard Weinberger wrote:
> >> Am Dienstag, 6. November 2018, 16:00:59 CET schrieb Anton Ivanov:
> >>> On 11/5/18 10:07 PM, Richard Weinberger wrote:
> >>>> Anton,
> >>>>
> >>>> Am Montag, 5. November 2018, 16:22:36 CET schrieb Anton Ivanov:
> >>>>> This looks like something specific to ttys - the io there gets
> >>>>> corruption and/or hangs.
> >>>>>
> >>>>> I cannot reproduce it when I ssh in.
> >>>>>
> >>>>> It does not look like it is the new write IRQ bugfix - that works
> >>>>> fine
> >>>>> over 4.19.
> >>>>>
> >>>>> Still debugging...
> >>>> Hmm, I don't see this with my Debian userspace.
> >>>> What exactly is your setup/config?
> >>>
> >>> Gotcha.
> >>>
> >>> 8ebfe885c65ec82a0b1e955cf99ed62664e84414 is the guilty party.
> >>>
> >>> With it, I get tty corruption on UML. Any attempt to push a large
> >>> amount
> >>> of data via the console results in spurious echoes or even a hang.
> >>>
> >>> Reverting it fixes things.
> >> Really?!
> >> This is "TTY: sn_console: Replace spin_is_locked() with spin_trylock()".
> >> sn_console is "SGI Altix L1 serial console"...
> >
> > OK. Then I am losing my mind.
>
> Not fully. I stand by my earlier statement - 4.20-rc1 is not quite right.
>
> The combination of debug options I had enabled hanged UML on boot with
> 4.20-rc1 made it hang on boot or produce the aforementioned corruption
> on tty later.
>
> Turning all debug off gives me a kernel which boots. However, it fails
> later at some point either on networking or or on disk.
>
> The same images boot cleanly with 4.14 to 4.19 +/- various fixes.
>
> I am going to rebuild everything from scratch including new clean Debian
> images tomorrow and start digging again.
I did a test with your .config and indeed, UML hangs.
The offending commit is this one:
commit ecb0a83e3198f2c1142901687afacbc73602a13b
Author: Christoph Hellwig <hch@lst.de>
Date: Thu Oct 18 22:55:03 2018 +0200
ubd: remove use of blk_rq_map_sg
There is no good reason to create a scatterlist in the ubd driver,
it can just iterate the request directly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
[rw: Folded in improvements as discussed with hch and jens]
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Please check your root filesystem, it is possible that the broken block
driver broke it and you see further problems.
Let me figure what in your .config triggers the issue.
Thanks,
//richard
_______________________________________________
linux-um mailing list
linux-um@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-um
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: 4.20-rc1 looks broken for UML
2018-11-06 19:56 ` Richard Weinberger
@ 2018-11-06 20:49 ` Richard Weinberger
2018-11-07 7:53 ` Christoph Hellwig
0 siblings, 1 reply; 17+ messages in thread
From: Richard Weinberger @ 2018-11-06 20:49 UTC (permalink / raw)
To: hch; +Cc: axboe, linux-um, Anton Ivanov
Christoph,
Anton found a problem in your "ubd: remove use of blk_rq_map_sg" patch.
With CONFIG_DEBUG_PAGEALLOC enabled, the ubd driver crashes because it tries
to deref address 0x12345678, which is the poison from store_stackinfo().
Please see below for more info.
Am Dienstag, 6. November 2018, 20:56:04 CET schrieb Richard Weinberger:
> Am Dienstag, 6. November 2018, 20:09:44 CET schrieb Anton Ivanov:
> I did a test with your .config and indeed, UML hangs.
>
> The offending commit is this one:
> commit ecb0a83e3198f2c1142901687afacbc73602a13b
> Author: Christoph Hellwig <hch@lst.de>
> Date: Thu Oct 18 22:55:03 2018 +0200
>
> ubd: remove use of blk_rq_map_sg
>
> There is no good reason to create a scatterlist in the ubd driver,
> it can just iterate the request directly.
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> [rw: Folded in improvements as discussed with hch and jens]
> Signed-off-by: Richard Weinberger <richard@nod.at>
> Signed-off-by: Jens Axboe <axboe@kernel.dk>
>
> Please check your root filesystem, it is possible that the broken block
> driver broke it and you see further problems.
> Let me figure what in your .config triggers the issue.
[ 1.810000] Pid: 1, comm: swapper Not tainted 4.20.0-rc1-00062-g8053e5b93eca-dirty
[ 1.810000] RIP: 0033:[<000000006003c436>]
RIP is rq_for_each_segment(bvec, req, iter) { in ubd_queue_rq().
[ 1.810000] RSP: 000000009ec5b4d0 EFLAGS: 00010206
[ 1.810000] RAX: 0000000000001000 RBX: 0000000000000000 RCX: 0000000000000000
[ 1.810000] RDX: 00000000478b0000 RSI: 0000000000001000 RDI: 00000000603dff36
[ 1.810000] RBP: 000000009ec5b530 R08: 0000000000000000 R09: 0000000000083700
[ 1.810000] R10: 0000000000000000 R11: 0000000000000246 R12: 000000002804c000
[ 1.810000] R13: 0000000012345678 R14: 0000000000001000 R15: 0000000000000000
R13 is the poison.
[ 1.810000] Kernel panic - not syncing: Segfault with no mm 00000000123456a8
Kernel tried to access it, plus a little offset.
Can it be that your change introduced a use-after-free bug in UML's block driver?
[ 1.810000] CPU: 0 PID: 1 Comm: swapper Not tainted 4.20.0-rc1-00062-g8053e5b93eca-dirty #245
[ 1.810000] Stack:
[ 1.810000] 9d8c0c00 9d8c0c00 9d8c4140 00000000
[ 1.810000] 9f5bf478 00001000 9d8b86a0 9ec5b5d0
[ 1.810000] 9d8c0c00 9d8c4140 00000000 9d8c4180
[ 1.810000] Call Trace:
[ 1.810000] [<603f595d>] blk_mq_dispatch_rq_list+0x32d/0x5c0
[ 1.810000] [<6040d6f8>] ? deadline_remove_request+0xa8/0xd0
[ 1.810000] [<6040d901>] ? dd_dispatch_request+0x1e1/0x2a0
[ 1.810000] [<603f5630>] ? blk_mq_dispatch_rq_list+0x0/0x5c0
[ 1.810000] [<603f9ca6>] blk_mq_do_dispatch_sched+0xe6/0x100
[ 1.810000] [<603fa401>] blk_mq_sched_dispatch_requests+0x111/0x180
[ 1.810000] [<603f7e80>] ? __blk_mq_get_tag.isra.0+0x0/0xa0
[ 1.810000] [<603f3904>] __blk_mq_run_hw_queue+0xf4/0x120
[ 1.810000] [<60044848>] ? set_signals+0x28/0x50
[ 1.810000] [<603f396d>] __blk_mq_delay_run_hw_queue+0x3d/0xd0
[ 1.810000] [<603f3b5d>] blk_mq_run_hw_queue+0x10d/0x1d0
[ 1.810000] [<603f7e80>] ? __blk_mq_get_tag.isra.0+0x0/0xa0
[ 1.810000] [<603f848d>] blk_mq_get_tag+0x16d/0x2d0
[ 1.810000] [<60083910>] ? autoremove_wake_function+0x0/0x40
[ 1.810000] [<603f277f>] blk_mq_get_request+0x13f/0x3d0
[ 1.810000] [<603fa4ba>] ? __blk_mq_sched_bio_merge+0x4a/0xd0
[ 1.810000] [<603f5343>] blk_mq_make_request+0x113/0x400
[ 1.810000] [<60044820>] ? set_signals+0x0/0x50
[ 1.810000] [<603e67e0>] ? blk_queue_enter+0x0/0x220
[ 1.810000] [<603e0ef0>] ? bio_endio+0x0/0x130
[ 1.810000] [<603e722e>] generic_make_request+0x27e/0x450
[ 1.810000] [<603e75c1>] ? submit_bio+0x1c1/0x1d0
[ 1.810000] [<60044820>] ? set_signals+0x0/0x50
[ 1.810000] [<60044820>] ? set_signals+0x0/0x50
[ 1.810000] [<603e75c1>] submit_bio+0x1c1/0x1d0
[ 1.810000] [<6017bcaf>] ? submit_bh_wbc.isra.1+0x21f/0x230
[ 1.810000] [<6017b940>] ? guard_bio_eod+0x70/0x1c0
[ 1.810000] [<6017bcaf>] submit_bh_wbc.isra.1+0x21f/0x230
[ 1.810000] [<6017ca30>] ? __breadahead+0x0/0x90
[ 1.810000] [<6017c3d2>] submit_bh+0x12/0x20
[ 1.810000] [<601ef9f5>] __ext4_get_inode_loc+0x415/0x4e0
[ 1.810000] [<601f2dee>] ext4_iget+0x6e/0xdb0
[ 1.810000] [<603aaec1>] ? avc_has_perm_noaudit+0xd1/0x130
[ 1.810000] [<601f3b60>] ext4_iget_normal+0x30/0x40
[ 1.810000] [<6020e074>] ext4_lookup+0x114/0x210
[ 1.810000] [<6015cee0>] ? d_alloc_parallel+0x0/0x5a0
[ 1.810000] [<6014a146>] __lookup_slow+0x106/0x190
[ 1.810000] [<6014e411>] ? lookup_fast+0x61/0x3a0
[ 1.810000] [<6014a213>] lookup_slow+0x43/0x70
[ 1.810000] [<6014d900>] ? trailing_symlink+0x0/0x2d0
[ 1.810000] [<6014e87d>] walk_component+0x12d/0x360
[ 1.810000] [<6014eb20>] ? link_path_walk+0x70/0x520
[ 1.810000] [<6014eab0>] ? link_path_walk+0x0/0x520
[ 1.810000] [<6014e750>] ? walk_component+0x0/0x360
[ 1.810000] [<6014d900>] ? trailing_symlink+0x0/0x2d0
[ 1.810000] [<6014f556>] path_lookupat+0x1c6/0x240
[ 1.810000] [<607aeeb0>] ? _raw_spin_unlock+0x0/0x20
[ 1.810000] [<607aed60>] ? _raw_spin_lock+0x0/0x20
[ 1.810000] [<60044848>] ? set_signals+0x28/0x50
[ 1.810000] [<60150d82>] filename_lookup+0xc2/0x1a0
[ 1.810000] [<607aeeb0>] ? _raw_spin_unlock+0x0/0x20
[ 1.810000] [<6014f390>] ? path_lookupat+0x0/0x240
[ 1.810000] [<6012e6f3>] ? kmem_cache_alloc+0xd3/0x120
[ 1.810000] [<6002d31a>] ? __strncpy_from_user+0x4a/0xa0
[ 1.810000] [<6012e620>] ? kmem_cache_alloc+0x0/0x120
[ 1.810000] [<60150899>] ? getname_flags+0xb9/0x310
[ 1.810000] [<600fc2be>] ? strndup_user+0x9e/0xc0
[ 1.810000] [<60150f33>] user_path_at_empty+0x43/0x50
[ 1.810000] [<60167bf5>] do_mount+0x85/0xfa0
[ 1.810000] [<600fc0a5>] ? memdup_user+0x85/0x100
[ 1.810000] [<600fc2be>] ? strndup_user+0x9e/0xc0
[ 1.810000] [<60168f63>] ksys_mount+0xd3/0x110
[ 1.810000] [<60729ba0>] ? strncmp+0x0/0x60
[ 1.810000] [<60729ba0>] ? strncmp+0x0/0x60
[ 1.810000] [<600272b0>] ? do_one_initcall+0x0/0x1a0
[ 1.810000] [<604a225f>] devtmpfs_mount+0x4f/0xa0
[ 1.810000] [<600272b0>] ? do_one_initcall+0x0/0x1a0
[ 1.810000] [<60001a85>] 0x60001a85
[ 1.810000] [<60163250>] ? ksys_dup+0x0/0x90
[ 1.810000] [<600272b0>] ? do_one_initcall+0x0/0x1a0
[ 1.810000] [<60001091>] 0x60001091
[ 1.810000] [<607aef4c>] ? _raw_spin_unlock_irq+0x1c/0x20
[ 1.810000] [<600908fa>] ? printk+0x0/0x94
[ 1.810000] [<607a8797>] kernel_init+0x27/0x150
[ 1.810000] [<60029061>] new_thread_handler+0x81/0xc0
Thanks,
//richard
_______________________________________________
linux-um mailing list
linux-um@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-um
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: 4.20-rc1 looks broken for UML
2018-11-06 20:49 ` Richard Weinberger
@ 2018-11-07 7:53 ` Christoph Hellwig
2018-11-07 10:46 ` Anton Ivanov
0 siblings, 1 reply; 17+ messages in thread
From: Christoph Hellwig @ 2018-11-07 7:53 UTC (permalink / raw)
To: Richard Weinberger; +Cc: axboe, linux-um, hch, Anton Ivanov
On Tue, Nov 06, 2018 at 09:49:45PM +0100, Richard Weinberger wrote:
> Christoph,
>
> Anton found a problem in your "ubd: remove use of blk_rq_map_sg" patch.
> With CONFIG_DEBUG_PAGEALLOC enabled, the ubd driver crashes because it tries
> to deref address 0x12345678, which is the poison from store_stackinfo().
>
> Please see below for more info.
> Can it be that your change introduced a use-after-free bug in UML's block driver?
Sounds like it. But I'll need some more time to debug it.
_______________________________________________
linux-um mailing list
linux-um@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-um
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: 4.20-rc1 looks broken for UML
2018-11-07 7:53 ` Christoph Hellwig
@ 2018-11-07 10:46 ` Anton Ivanov
2018-11-07 13:33 ` Anton Ivanov
0 siblings, 1 reply; 17+ messages in thread
From: Anton Ivanov @ 2018-11-07 10:46 UTC (permalink / raw)
To: Christoph Hellwig, Richard Weinberger; +Cc: axboe, linux-um
On 11/7/18 7:53 AM, Christoph Hellwig wrote:
> On Tue, Nov 06, 2018 at 09:49:45PM +0100, Richard Weinberger wrote:
>> Christoph,
>>
>> Anton found a problem in your "ubd: remove use of blk_rq_map_sg" patch.
>> With CONFIG_DEBUG_PAGEALLOC enabled, the ubd driver crashes because it tries
>> to deref address 0x12345678, which is the poison from store_stackinfo().
>>
>> Please see below for more info.
>> Can it be that your change introduced a use-after-free bug in UML's block driver?
> Sounds like it. But I'll need some more time to debug it.
I had to revert 4e6da0fe8058df9bfa937902fcd9cb2b7b89b2df "um: Convert
ubd driver to blk-mq" as well to get things back to business as usual.
The block-mq driver works for reading - no issues if everything is ro.
It also clearly works for writing for some configs in older kernels,
otherwise it would have been picked up.
Something changed in 4.20-rc1 which made it fail in my config. The
failure is instantaneous for 4.20-rc1 with only
ecb0a83e3198f2c1142901687afacbc73602a13b " ubd: remove use of
blk_rq_map_sg" reverted.
Reverting both and restoring the driver to 4.19 state fixes things.
I am going to give it a go to debug exactly what breaks for writing in
ecb0a83e3198f2c1142901687afacbc73602a13b " ubd: remove use of
blk_rq_map_sg".
A.
>
> _______________________________________________
> linux-um mailing list
> linux-um@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-um
>
_______________________________________________
linux-um mailing list
linux-um@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-um
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: 4.20-rc1 looks broken for UML
2018-11-07 10:46 ` Anton Ivanov
@ 2018-11-07 13:33 ` Anton Ivanov
0 siblings, 0 replies; 17+ messages in thread
From: Anton Ivanov @ 2018-11-07 13:33 UTC (permalink / raw)
To: Christoph Hellwig, Richard Weinberger; +Cc: axboe, linux-um
On 11/7/18 10:46 AM, Anton Ivanov wrote:
> On 11/7/18 7:53 AM, Christoph Hellwig wrote:
>
>> On Tue, Nov 06, 2018 at 09:49:45PM +0100, Richard Weinberger wrote:
>>> Christoph,
>>>
>>> Anton found a problem in your "ubd: remove use of blk_rq_map_sg" patch.
>>> With CONFIG_DEBUG_PAGEALLOC enabled, the ubd driver crashes because
>>> it tries
>>> to deref address 0x12345678, which is the poison from
>>> store_stackinfo().
>>>
>>> Please see below for more info.
>>> Can it be that your change introduced a use-after-free bug in UML's
>>> block driver?
>> Sounds like it. But I'll need some more time to debug it.
>
> I had to revert 4e6da0fe8058df9bfa937902fcd9cb2b7b89b2df "um: Convert
> ubd driver to blk-mq" as well to get things back to business as usual.
First of all, I apologize for not looking at it properly when it first
came out, I was buried under openswitch and opendaylight at the time.
I have looked at it again and I see a few issues with it:
1. On transient failure after a requeue it returns BLK_STS_OK, shouldn't
this be BLK_STS_RESOURCE?
2. On transient failure it redoes the whole SG list. That should not be
the case, it should record how far it got to and redo the list from there:
https://elixir.bootlin.com/linux/latest/source/drivers/block/nbd.c#L509
These should not prevent it from working though and should not cause an
immediate failure when trying to mount rw or remount a ro as rw. I have
not found the cause for that one yet.
A.
>
> The block-mq driver works for reading - no issues if everything is ro.
> It also clearly works for writing for some configs in older kernels,
> otherwise it would have been picked up.
>
> Something changed in 4.20-rc1 which made it fail in my config. The
> failure is instantaneous for 4.20-rc1 with only
> ecb0a83e3198f2c1142901687afacbc73602a13b " ubd: remove use of
> blk_rq_map_sg" reverted.
>
> Reverting both and restoring the driver to 4.19 state fixes things.
>
> I am going to give it a go to debug exactly what breaks for writing in
> ecb0a83e3198f2c1142901687afacbc73602a13b " ubd: remove use of
> blk_rq_map_sg".
>
> A.
>
>
>>
>> _______________________________________________
>> linux-um mailing list
>> linux-um@lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-um
>>
_______________________________________________
linux-um mailing list
linux-um@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-um
^ permalink raw reply [flat|nested] 17+ messages in thread
end of thread, other threads:[~2018-11-07 13:33 UTC | newest]
Thread overview: 17+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-11-05 13:13 4.20-rc1 looks broken for UML Anton Ivanov
2018-11-05 15:22 ` Anton Ivanov
2018-11-05 22:07 ` Richard Weinberger
2018-11-06 7:03 ` Anton Ivanov
2018-11-06 15:00 ` Anton Ivanov
2018-11-06 15:07 ` Anton Ivanov
2018-11-06 18:00 ` Lance Roy
2018-11-06 18:12 ` Anton Ivanov
2018-11-06 17:04 ` Richard Weinberger
2018-11-06 17:25 ` Anton Ivanov
2018-11-06 19:09 ` Anton Ivanov
2018-11-06 19:56 ` Richard Weinberger
2018-11-06 20:49 ` Richard Weinberger
2018-11-07 7:53 ` Christoph Hellwig
2018-11-07 10:46 ` Anton Ivanov
2018-11-07 13:33 ` Anton Ivanov
2018-11-06 17:42 ` Anton Ivanov
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.