* [PATCH 1/7] dt-bindings: power: imx8mn: add defines for DISP blk-ctrl domains
@ 2021-10-06 0:04 ` Adam Ford
0 siblings, 0 replies; 30+ messages in thread
From: Adam Ford @ 2021-10-06 0:04 UTC (permalink / raw)
To: linux-arm-kernel
Cc: aford, Adam Ford, Rob Herring, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
Lucas Stach, devicetree, linux-kernel
This adds the defines for the power domains provided by the DISP
blk-ctrl.
Signed-off-by: Adam Ford <aford173@gmail.com>
---
include/dt-bindings/power/imx8mn-power.h | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/include/dt-bindings/power/imx8mn-power.h b/include/dt-bindings/power/imx8mn-power.h
index 102ee85a9b62..eedd0e581939 100644
--- a/include/dt-bindings/power/imx8mn-power.h
+++ b/include/dt-bindings/power/imx8mn-power.h
@@ -12,4 +12,9 @@
#define IMX8MN_POWER_DOMAIN_DISPMIX 3
#define IMX8MN_POWER_DOMAIN_MIPI 4
+#define IMX8MN_DISPBLK_PD_MIPI_DSI 0
+#define IMX8MN_DISPBLK_PD_MIPI_CSI 1
+#define IMX8MN_DISPBLK_PD_LCDIF 2
+#define IMX8MN_DISPBLK_PD_ISI 3
+
#endif
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 30+ messages in thread
* [PATCH 2/7] dt-bindings: soc: add binding for i.MX8MN DISP blk-ctrl
2021-10-06 0:04 ` Adam Ford
@ 2021-10-06 0:04 ` Adam Ford
-1 siblings, 0 replies; 30+ messages in thread
From: Adam Ford @ 2021-10-06 0:04 UTC (permalink / raw)
To: linux-arm-kernel
Cc: aford, Adam Ford, Rob Herring, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
Lucas Stach, devicetree, linux-kernel
This adds the DT binding for the i.MX8MN DISP blk-ctrl.
Signed-off-by: Adam Ford <aford173@gmail.com>
---
.../soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml | 97 +++++++++++++++++++
1 file changed, 97 insertions(+)
create mode 100644 Documentation/devicetree/bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml
diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml
new file mode 100644
index 000000000000..92d30aff446e
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mm-disp-blk-ctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8MN DISP blk-ctrl
+
+maintainers:
+ - Lucas Stach <l.stach@pengutronix.de>
+
+description:
+ The i.MX8MN DISP blk-ctrl is a top-level peripheral providing access to
+ the NoC and ensuring proper power sequencing of the display and MIPI CSI
+ peripherals located in the DISP domain of the SoC.
+
+properties:
+ compatible:
+ items:
+ - const: fsl,imx8mn-disp-blk-ctrl
+ - const: syscon
+
+ reg:
+ maxItems: 1
+
+ '#power-domain-cells':
+ const: 1
+
+ power-domains:
+ minItems: 5
+ maxItems: 5
+
+ power-domain-names:
+ items:
+ - const: bus
+ - const: isi
+ - const: lcdif
+ - const: mipi-dsi
+ - const: mipi-csi
+
+ clocks:
+ minItems: 11
+ maxItems: 11
+
+ clock-names:
+ items:
+ - const: disp_axi
+ - const: disp_apb
+ - const: disp_axi_root
+ - const: disp_apb_root
+ - const: lcdif-axi
+ - const: lcdif-apb
+ - const: lcdif-pix
+ - const: dsi-pclk
+ - const: dsi-ref
+ - const: csi-aclk
+ - const: csi-pclk
+
+required:
+ - compatible
+ - reg
+ - power-domains
+ - power-domain-names
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx8mn-clock.h>
+ #include <dt-bindings/power/imx8mn-power.h>
+
+ disp_blk_ctl: blk_ctrl@32e28000 {
+ compatible = "fsl,imx8mn-disp-blk-ctrl", "syscon";
+ reg = <0x32e28000 0x100>;
+ power-domains = <&pgc_dispmix>, <&pgc_dispmix>,
+ <&pgc_dispmix>, <&pgc_mipi>,
+ <&pgc_mipi>;
+ power-domain-names = "bus", "isi", "lcdif", "mipi-dsi",
+ "mipi-csi";
+ clocks = <&clk IMX8MN_CLK_DISP_AXI>,
+ <&clk IMX8MN_CLK_DISP_APB>,
+ <&clk IMX8MN_CLK_DISP_AXI_ROOT>,
+ <&clk IMX8MN_CLK_DISP_APB_ROOT>,
+ <&clk IMX8MN_CLK_DISP_AXI_ROOT>,
+ <&clk IMX8MN_CLK_DISP_APB_ROOT>,
+ <&clk IMX8MN_CLK_DISP_PIXEL_ROOT>,
+ <&clk IMX8MN_CLK_DSI_CORE>,
+ <&clk IMX8MN_CLK_DSI_PHY_REF>,
+ <&clk IMX8MN_CLK_CSI1_PHY_REF>,
+ <&clk IMX8MN_CLK_CAMERA_PIXEL_ROOT>;
+ clock-names = "disp_axi", "disp_apb", "disp_axi_root", "disp_apb_root",
+ "lcdif-axi", "lcdif-apb", "lcdif-pix", "dsi-pclk",
+ "dsi-ref", "csi-aclk", "csi-pclk";
+ #power-domain-cells = <1>;
+ };
--
2.25.1
^ permalink raw reply related [flat|nested] 30+ messages in thread* [PATCH 2/7] dt-bindings: soc: add binding for i.MX8MN DISP blk-ctrl
@ 2021-10-06 0:04 ` Adam Ford
0 siblings, 0 replies; 30+ messages in thread
From: Adam Ford @ 2021-10-06 0:04 UTC (permalink / raw)
To: linux-arm-kernel
Cc: aford, Adam Ford, Rob Herring, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
Lucas Stach, devicetree, linux-kernel
This adds the DT binding for the i.MX8MN DISP blk-ctrl.
Signed-off-by: Adam Ford <aford173@gmail.com>
---
.../soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml | 97 +++++++++++++++++++
1 file changed, 97 insertions(+)
create mode 100644 Documentation/devicetree/bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml
diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml
new file mode 100644
index 000000000000..92d30aff446e
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mm-disp-blk-ctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8MN DISP blk-ctrl
+
+maintainers:
+ - Lucas Stach <l.stach@pengutronix.de>
+
+description:
+ The i.MX8MN DISP blk-ctrl is a top-level peripheral providing access to
+ the NoC and ensuring proper power sequencing of the display and MIPI CSI
+ peripherals located in the DISP domain of the SoC.
+
+properties:
+ compatible:
+ items:
+ - const: fsl,imx8mn-disp-blk-ctrl
+ - const: syscon
+
+ reg:
+ maxItems: 1
+
+ '#power-domain-cells':
+ const: 1
+
+ power-domains:
+ minItems: 5
+ maxItems: 5
+
+ power-domain-names:
+ items:
+ - const: bus
+ - const: isi
+ - const: lcdif
+ - const: mipi-dsi
+ - const: mipi-csi
+
+ clocks:
+ minItems: 11
+ maxItems: 11
+
+ clock-names:
+ items:
+ - const: disp_axi
+ - const: disp_apb
+ - const: disp_axi_root
+ - const: disp_apb_root
+ - const: lcdif-axi
+ - const: lcdif-apb
+ - const: lcdif-pix
+ - const: dsi-pclk
+ - const: dsi-ref
+ - const: csi-aclk
+ - const: csi-pclk
+
+required:
+ - compatible
+ - reg
+ - power-domains
+ - power-domain-names
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx8mn-clock.h>
+ #include <dt-bindings/power/imx8mn-power.h>
+
+ disp_blk_ctl: blk_ctrl@32e28000 {
+ compatible = "fsl,imx8mn-disp-blk-ctrl", "syscon";
+ reg = <0x32e28000 0x100>;
+ power-domains = <&pgc_dispmix>, <&pgc_dispmix>,
+ <&pgc_dispmix>, <&pgc_mipi>,
+ <&pgc_mipi>;
+ power-domain-names = "bus", "isi", "lcdif", "mipi-dsi",
+ "mipi-csi";
+ clocks = <&clk IMX8MN_CLK_DISP_AXI>,
+ <&clk IMX8MN_CLK_DISP_APB>,
+ <&clk IMX8MN_CLK_DISP_AXI_ROOT>,
+ <&clk IMX8MN_CLK_DISP_APB_ROOT>,
+ <&clk IMX8MN_CLK_DISP_AXI_ROOT>,
+ <&clk IMX8MN_CLK_DISP_APB_ROOT>,
+ <&clk IMX8MN_CLK_DISP_PIXEL_ROOT>,
+ <&clk IMX8MN_CLK_DSI_CORE>,
+ <&clk IMX8MN_CLK_DSI_PHY_REF>,
+ <&clk IMX8MN_CLK_CSI1_PHY_REF>,
+ <&clk IMX8MN_CLK_CAMERA_PIXEL_ROOT>;
+ clock-names = "disp_axi", "disp_apb", "disp_axi_root", "disp_apb_root",
+ "lcdif-axi", "lcdif-apb", "lcdif-pix", "dsi-pclk",
+ "dsi-ref", "csi-aclk", "csi-pclk";
+ #power-domain-cells = <1>;
+ };
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 30+ messages in thread* Re: [PATCH 2/7] dt-bindings: soc: add binding for i.MX8MN DISP blk-ctrl
2021-10-06 0:04 ` Adam Ford
@ 2021-10-06 7:39 ` Lucas Stach
-1 siblings, 0 replies; 30+ messages in thread
From: Lucas Stach @ 2021-10-06 7:39 UTC (permalink / raw)
To: Adam Ford, linux-arm-kernel
Cc: aford, Rob Herring, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
devicetree, linux-kernel
Am Dienstag, dem 05.10.2021 um 19:04 -0500 schrieb Adam Ford:
> This adds the DT binding for the i.MX8MN DISP blk-ctrl.
>
> Signed-off-by: Adam Ford <aford173@gmail.com>
> ---
> .../soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml | 97 +++++++++++++++++++
> 1 file changed, 97 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml
>
> diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml
> new file mode 100644
> index 000000000000..92d30aff446e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml
> @@ -0,0 +1,97 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mm-disp-blk-ctrl.yaml#
mm -> mn in the file name.
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: NXP i.MX8MN DISP blk-ctrl
> +
> +maintainers:
> + - Lucas Stach <l.stach@pengutronix.de>
I'm not opposed to being maintainer for this file, just making sure
that this is what you intended.
Other than that I think this looks okay.
Regards,
Lucas
> +
> +description:
> + The i.MX8MN DISP blk-ctrl is a top-level peripheral providing access to
> + the NoC and ensuring proper power sequencing of the display and MIPI CSI
> + peripherals located in the DISP domain of the SoC.
> +
> +properties:
> + compatible:
> + items:
> + - const: fsl,imx8mn-disp-blk-ctrl
> + - const: syscon
> +
> + reg:
> + maxItems: 1
> +
> + '#power-domain-cells':
> + const: 1
> +
> + power-domains:
> + minItems: 5
> + maxItems: 5
> +
> + power-domain-names:
> + items:
> + - const: bus
> + - const: isi
> + - const: lcdif
> + - const: mipi-dsi
> + - const: mipi-csi
> +
> + clocks:
> + minItems: 11
> + maxItems: 11
> +
> + clock-names:
> + items:
> + - const: disp_axi
> + - const: disp_apb
> + - const: disp_axi_root
> + - const: disp_apb_root
> + - const: lcdif-axi
> + - const: lcdif-apb
> + - const: lcdif-pix
> + - const: dsi-pclk
> + - const: dsi-ref
> + - const: csi-aclk
> + - const: csi-pclk
> +
> +required:
> + - compatible
> + - reg
> + - power-domains
> + - power-domain-names
> + - clocks
> + - clock-names
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/imx8mn-clock.h>
> + #include <dt-bindings/power/imx8mn-power.h>
> +
> + disp_blk_ctl: blk_ctrl@32e28000 {
> + compatible = "fsl,imx8mn-disp-blk-ctrl", "syscon";
> + reg = <0x32e28000 0x100>;
> + power-domains = <&pgc_dispmix>, <&pgc_dispmix>,
> + <&pgc_dispmix>, <&pgc_mipi>,
> + <&pgc_mipi>;
> + power-domain-names = "bus", "isi", "lcdif", "mipi-dsi",
> + "mipi-csi";
> + clocks = <&clk IMX8MN_CLK_DISP_AXI>,
> + <&clk IMX8MN_CLK_DISP_APB>,
> + <&clk IMX8MN_CLK_DISP_AXI_ROOT>,
> + <&clk IMX8MN_CLK_DISP_APB_ROOT>,
> + <&clk IMX8MN_CLK_DISP_AXI_ROOT>,
> + <&clk IMX8MN_CLK_DISP_APB_ROOT>,
> + <&clk IMX8MN_CLK_DISP_PIXEL_ROOT>,
> + <&clk IMX8MN_CLK_DSI_CORE>,
> + <&clk IMX8MN_CLK_DSI_PHY_REF>,
> + <&clk IMX8MN_CLK_CSI1_PHY_REF>,
> + <&clk IMX8MN_CLK_CAMERA_PIXEL_ROOT>;
> + clock-names = "disp_axi", "disp_apb", "disp_axi_root", "disp_apb_root",
> + "lcdif-axi", "lcdif-apb", "lcdif-pix", "dsi-pclk",
> + "dsi-ref", "csi-aclk", "csi-pclk";
> + #power-domain-cells = <1>;
> + };
^ permalink raw reply [flat|nested] 30+ messages in thread* Re: [PATCH 2/7] dt-bindings: soc: add binding for i.MX8MN DISP blk-ctrl
@ 2021-10-06 7:39 ` Lucas Stach
0 siblings, 0 replies; 30+ messages in thread
From: Lucas Stach @ 2021-10-06 7:39 UTC (permalink / raw)
To: Adam Ford, linux-arm-kernel
Cc: aford, Rob Herring, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
devicetree, linux-kernel
Am Dienstag, dem 05.10.2021 um 19:04 -0500 schrieb Adam Ford:
> This adds the DT binding for the i.MX8MN DISP blk-ctrl.
>
> Signed-off-by: Adam Ford <aford173@gmail.com>
> ---
> .../soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml | 97 +++++++++++++++++++
> 1 file changed, 97 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml
>
> diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml
> new file mode 100644
> index 000000000000..92d30aff446e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml
> @@ -0,0 +1,97 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mm-disp-blk-ctrl.yaml#
mm -> mn in the file name.
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: NXP i.MX8MN DISP blk-ctrl
> +
> +maintainers:
> + - Lucas Stach <l.stach@pengutronix.de>
I'm not opposed to being maintainer for this file, just making sure
that this is what you intended.
Other than that I think this looks okay.
Regards,
Lucas
> +
> +description:
> + The i.MX8MN DISP blk-ctrl is a top-level peripheral providing access to
> + the NoC and ensuring proper power sequencing of the display and MIPI CSI
> + peripherals located in the DISP domain of the SoC.
> +
> +properties:
> + compatible:
> + items:
> + - const: fsl,imx8mn-disp-blk-ctrl
> + - const: syscon
> +
> + reg:
> + maxItems: 1
> +
> + '#power-domain-cells':
> + const: 1
> +
> + power-domains:
> + minItems: 5
> + maxItems: 5
> +
> + power-domain-names:
> + items:
> + - const: bus
> + - const: isi
> + - const: lcdif
> + - const: mipi-dsi
> + - const: mipi-csi
> +
> + clocks:
> + minItems: 11
> + maxItems: 11
> +
> + clock-names:
> + items:
> + - const: disp_axi
> + - const: disp_apb
> + - const: disp_axi_root
> + - const: disp_apb_root
> + - const: lcdif-axi
> + - const: lcdif-apb
> + - const: lcdif-pix
> + - const: dsi-pclk
> + - const: dsi-ref
> + - const: csi-aclk
> + - const: csi-pclk
> +
> +required:
> + - compatible
> + - reg
> + - power-domains
> + - power-domain-names
> + - clocks
> + - clock-names
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/imx8mn-clock.h>
> + #include <dt-bindings/power/imx8mn-power.h>
> +
> + disp_blk_ctl: blk_ctrl@32e28000 {
> + compatible = "fsl,imx8mn-disp-blk-ctrl", "syscon";
> + reg = <0x32e28000 0x100>;
> + power-domains = <&pgc_dispmix>, <&pgc_dispmix>,
> + <&pgc_dispmix>, <&pgc_mipi>,
> + <&pgc_mipi>;
> + power-domain-names = "bus", "isi", "lcdif", "mipi-dsi",
> + "mipi-csi";
> + clocks = <&clk IMX8MN_CLK_DISP_AXI>,
> + <&clk IMX8MN_CLK_DISP_APB>,
> + <&clk IMX8MN_CLK_DISP_AXI_ROOT>,
> + <&clk IMX8MN_CLK_DISP_APB_ROOT>,
> + <&clk IMX8MN_CLK_DISP_AXI_ROOT>,
> + <&clk IMX8MN_CLK_DISP_APB_ROOT>,
> + <&clk IMX8MN_CLK_DISP_PIXEL_ROOT>,
> + <&clk IMX8MN_CLK_DSI_CORE>,
> + <&clk IMX8MN_CLK_DSI_PHY_REF>,
> + <&clk IMX8MN_CLK_CSI1_PHY_REF>,
> + <&clk IMX8MN_CLK_CAMERA_PIXEL_ROOT>;
> + clock-names = "disp_axi", "disp_apb", "disp_axi_root", "disp_apb_root",
> + "lcdif-axi", "lcdif-apb", "lcdif-pix", "dsi-pclk",
> + "dsi-ref", "csi-aclk", "csi-pclk";
> + #power-domain-cells = <1>;
> + };
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 30+ messages in thread* Re: [PATCH 2/7] dt-bindings: soc: add binding for i.MX8MN DISP blk-ctrl
2021-10-06 7:39 ` Lucas Stach
@ 2021-10-06 12:30 ` Adam Ford
-1 siblings, 0 replies; 30+ messages in thread
From: Adam Ford @ 2021-10-06 12:30 UTC (permalink / raw)
To: Lucas Stach
Cc: arm-soc, Adam Ford-BE, Rob Herring, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
devicetree, Linux Kernel Mailing List
On Wed, Oct 6, 2021 at 2:39 AM Lucas Stach <l.stach@pengutronix.de> wrote:
>
> Am Dienstag, dem 05.10.2021 um 19:04 -0500 schrieb Adam Ford:
> > This adds the DT binding for the i.MX8MN DISP blk-ctrl.
> >
> > Signed-off-by: Adam Ford <aford173@gmail.com>
> > ---
> > .../soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml | 97 +++++++++++++++++++
> > 1 file changed, 97 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml
> > new file mode 100644
> > index 000000000000..92d30aff446e
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml
> > @@ -0,0 +1,97 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mm-disp-blk-ctrl.yaml#
>
> mm -> mn in the file name.
Oops, I missed one. Thanks for catching.
>
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: NXP i.MX8MN DISP blk-ctrl
> > +
> > +maintainers:
> > + - Lucas Stach <l.stach@pengutronix.de>
>
> I'm not opposed to being maintainer for this file, just making sure
> that this is what you intended.
Because this yaml file points to the driver you wrote, I thought it
made sense to have you be the maintainer. In hindsight, I should have
asked first. Sorry about that.
>
> Other than that I think this looks okay.
Thanks for reviewing the series. I'll try to get a V2 prepared
tomorrow, and I'll wait a little bit to send it, just in case NXP
wants to give some feedback as well.
adam
>
> Regards,
> Lucas
>
> > +
> > +description:
> > + The i.MX8MN DISP blk-ctrl is a top-level peripheral providing access to
> > + the NoC and ensuring proper power sequencing of the display and MIPI CSI
> > + peripherals located in the DISP domain of the SoC.
> > +
> > +properties:
> > + compatible:
> > + items:
> > + - const: fsl,imx8mn-disp-blk-ctrl
> > + - const: syscon
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + '#power-domain-cells':
> > + const: 1
> > +
> > + power-domains:
> > + minItems: 5
> > + maxItems: 5
> > +
> > + power-domain-names:
> > + items:
> > + - const: bus
> > + - const: isi
> > + - const: lcdif
> > + - const: mipi-dsi
> > + - const: mipi-csi
> > +
> > + clocks:
> > + minItems: 11
> > + maxItems: 11
> > +
> > + clock-names:
> > + items:
> > + - const: disp_axi
> > + - const: disp_apb
> > + - const: disp_axi_root
> > + - const: disp_apb_root
> > + - const: lcdif-axi
> > + - const: lcdif-apb
> > + - const: lcdif-pix
> > + - const: dsi-pclk
> > + - const: dsi-ref
> > + - const: csi-aclk
> > + - const: csi-pclk
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - power-domains
> > + - power-domain-names
> > + - clocks
> > + - clock-names
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/clock/imx8mn-clock.h>
> > + #include <dt-bindings/power/imx8mn-power.h>
> > +
> > + disp_blk_ctl: blk_ctrl@32e28000 {
> > + compatible = "fsl,imx8mn-disp-blk-ctrl", "syscon";
> > + reg = <0x32e28000 0x100>;
> > + power-domains = <&pgc_dispmix>, <&pgc_dispmix>,
> > + <&pgc_dispmix>, <&pgc_mipi>,
> > + <&pgc_mipi>;
> > + power-domain-names = "bus", "isi", "lcdif", "mipi-dsi",
> > + "mipi-csi";
> > + clocks = <&clk IMX8MN_CLK_DISP_AXI>,
> > + <&clk IMX8MN_CLK_DISP_APB>,
> > + <&clk IMX8MN_CLK_DISP_AXI_ROOT>,
> > + <&clk IMX8MN_CLK_DISP_APB_ROOT>,
> > + <&clk IMX8MN_CLK_DISP_AXI_ROOT>,
> > + <&clk IMX8MN_CLK_DISP_APB_ROOT>,
> > + <&clk IMX8MN_CLK_DISP_PIXEL_ROOT>,
> > + <&clk IMX8MN_CLK_DSI_CORE>,
> > + <&clk IMX8MN_CLK_DSI_PHY_REF>,
> > + <&clk IMX8MN_CLK_CSI1_PHY_REF>,
> > + <&clk IMX8MN_CLK_CAMERA_PIXEL_ROOT>;
> > + clock-names = "disp_axi", "disp_apb", "disp_axi_root", "disp_apb_root",
> > + "lcdif-axi", "lcdif-apb", "lcdif-pix", "dsi-pclk",
> > + "dsi-ref", "csi-aclk", "csi-pclk";
> > + #power-domain-cells = <1>;
> > + };
>
>
^ permalink raw reply [flat|nested] 30+ messages in thread* Re: [PATCH 2/7] dt-bindings: soc: add binding for i.MX8MN DISP blk-ctrl
@ 2021-10-06 12:30 ` Adam Ford
0 siblings, 0 replies; 30+ messages in thread
From: Adam Ford @ 2021-10-06 12:30 UTC (permalink / raw)
To: Lucas Stach
Cc: arm-soc, Adam Ford-BE, Rob Herring, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
devicetree, Linux Kernel Mailing List
On Wed, Oct 6, 2021 at 2:39 AM Lucas Stach <l.stach@pengutronix.de> wrote:
>
> Am Dienstag, dem 05.10.2021 um 19:04 -0500 schrieb Adam Ford:
> > This adds the DT binding for the i.MX8MN DISP blk-ctrl.
> >
> > Signed-off-by: Adam Ford <aford173@gmail.com>
> > ---
> > .../soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml | 97 +++++++++++++++++++
> > 1 file changed, 97 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml
> > new file mode 100644
> > index 000000000000..92d30aff446e
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml
> > @@ -0,0 +1,97 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mm-disp-blk-ctrl.yaml#
>
> mm -> mn in the file name.
Oops, I missed one. Thanks for catching.
>
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: NXP i.MX8MN DISP blk-ctrl
> > +
> > +maintainers:
> > + - Lucas Stach <l.stach@pengutronix.de>
>
> I'm not opposed to being maintainer for this file, just making sure
> that this is what you intended.
Because this yaml file points to the driver you wrote, I thought it
made sense to have you be the maintainer. In hindsight, I should have
asked first. Sorry about that.
>
> Other than that I think this looks okay.
Thanks for reviewing the series. I'll try to get a V2 prepared
tomorrow, and I'll wait a little bit to send it, just in case NXP
wants to give some feedback as well.
adam
>
> Regards,
> Lucas
>
> > +
> > +description:
> > + The i.MX8MN DISP blk-ctrl is a top-level peripheral providing access to
> > + the NoC and ensuring proper power sequencing of the display and MIPI CSI
> > + peripherals located in the DISP domain of the SoC.
> > +
> > +properties:
> > + compatible:
> > + items:
> > + - const: fsl,imx8mn-disp-blk-ctrl
> > + - const: syscon
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + '#power-domain-cells':
> > + const: 1
> > +
> > + power-domains:
> > + minItems: 5
> > + maxItems: 5
> > +
> > + power-domain-names:
> > + items:
> > + - const: bus
> > + - const: isi
> > + - const: lcdif
> > + - const: mipi-dsi
> > + - const: mipi-csi
> > +
> > + clocks:
> > + minItems: 11
> > + maxItems: 11
> > +
> > + clock-names:
> > + items:
> > + - const: disp_axi
> > + - const: disp_apb
> > + - const: disp_axi_root
> > + - const: disp_apb_root
> > + - const: lcdif-axi
> > + - const: lcdif-apb
> > + - const: lcdif-pix
> > + - const: dsi-pclk
> > + - const: dsi-ref
> > + - const: csi-aclk
> > + - const: csi-pclk
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - power-domains
> > + - power-domain-names
> > + - clocks
> > + - clock-names
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/clock/imx8mn-clock.h>
> > + #include <dt-bindings/power/imx8mn-power.h>
> > +
> > + disp_blk_ctl: blk_ctrl@32e28000 {
> > + compatible = "fsl,imx8mn-disp-blk-ctrl", "syscon";
> > + reg = <0x32e28000 0x100>;
> > + power-domains = <&pgc_dispmix>, <&pgc_dispmix>,
> > + <&pgc_dispmix>, <&pgc_mipi>,
> > + <&pgc_mipi>;
> > + power-domain-names = "bus", "isi", "lcdif", "mipi-dsi",
> > + "mipi-csi";
> > + clocks = <&clk IMX8MN_CLK_DISP_AXI>,
> > + <&clk IMX8MN_CLK_DISP_APB>,
> > + <&clk IMX8MN_CLK_DISP_AXI_ROOT>,
> > + <&clk IMX8MN_CLK_DISP_APB_ROOT>,
> > + <&clk IMX8MN_CLK_DISP_AXI_ROOT>,
> > + <&clk IMX8MN_CLK_DISP_APB_ROOT>,
> > + <&clk IMX8MN_CLK_DISP_PIXEL_ROOT>,
> > + <&clk IMX8MN_CLK_DSI_CORE>,
> > + <&clk IMX8MN_CLK_DSI_PHY_REF>,
> > + <&clk IMX8MN_CLK_CSI1_PHY_REF>,
> > + <&clk IMX8MN_CLK_CAMERA_PIXEL_ROOT>;
> > + clock-names = "disp_axi", "disp_apb", "disp_axi_root", "disp_apb_root",
> > + "lcdif-axi", "lcdif-apb", "lcdif-pix", "dsi-pclk",
> > + "dsi-ref", "csi-aclk", "csi-pclk";
> > + #power-domain-cells = <1>;
> > + };
>
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [PATCH 2/7] dt-bindings: soc: add binding for i.MX8MN DISP blk-ctrl
2021-10-06 0:04 ` Adam Ford
@ 2021-10-06 13:16 ` Rob Herring
-1 siblings, 0 replies; 30+ messages in thread
From: Rob Herring @ 2021-10-06 13:16 UTC (permalink / raw)
To: Adam Ford
Cc: Rob Herring, Fabio Estevam, NXP Linux Team, Lucas Stach,
Shawn Guo, linux-kernel, devicetree, aford, Sascha Hauer,
Pengutronix Kernel Team, linux-arm-kernel
On Tue, 05 Oct 2021 19:04:59 -0500, Adam Ford wrote:
> This adds the DT binding for the i.MX8MN DISP blk-ctrl.
>
> Signed-off-by: Adam Ford <aford173@gmail.com>
> ---
> .../soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml | 97 +++++++++++++++++++
> 1 file changed, 97 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
./Documentation/devicetree/bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml:78:1: [error] syntax error: found character '\t' that cannot start any token (syntax)
dtschema/dtc warnings/errors:
make[1]: *** Deleting file 'Documentation/devicetree/bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.example.dts'
Traceback (most recent call last):
File "/usr/local/bin/dt-extract-example", line 45, in <module>
binding = yaml.load(open(args.yamlfile, encoding='utf-8').read())
File "/usr/local/lib/python3.8/dist-packages/ruamel/yaml/main.py", line 434, in load
return constructor.get_single_data()
File "/usr/local/lib/python3.8/dist-packages/ruamel/yaml/constructor.py", line 120, in get_single_data
node = self.composer.get_single_node()
File "_ruamel_yaml.pyx", line 706, in _ruamel_yaml.CParser.get_single_node
File "_ruamel_yaml.pyx", line 724, in _ruamel_yaml.CParser._compose_document
File "_ruamel_yaml.pyx", line 775, in _ruamel_yaml.CParser._compose_node
File "_ruamel_yaml.pyx", line 889, in _ruamel_yaml.CParser._compose_mapping_node
File "_ruamel_yaml.pyx", line 773, in _ruamel_yaml.CParser._compose_node
File "_ruamel_yaml.pyx", line 848, in _ruamel_yaml.CParser._compose_sequence_node
File "_ruamel_yaml.pyx", line 904, in _ruamel_yaml.CParser._parse_next_event
ruamel.yaml.scanner.ScannerError: while scanning a block scalar
in "<unicode string>", line 70, column 5
found a tab character where an indentation space is expected
in "<unicode string>", line 78, column 1
make[1]: *** [Documentation/devicetree/bindings/Makefile:20: Documentation/devicetree/bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.example.dts] Error 1
make[1]: *** Waiting for unfinished jobs....
./Documentation/devicetree/bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml: while scanning a block scalar
in "<unicode string>", line 70, column 5
found a tab character where an indentation space is expected
in "<unicode string>", line 78, column 1
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml: ignoring, error parsing file
warning: no schema found in file: ./Documentation/devicetree/bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml
make: *** [Makefile:1441: dt_binding_check] Error 2
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/patch/1536963
This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit.
^ permalink raw reply [flat|nested] 30+ messages in thread* Re: [PATCH 2/7] dt-bindings: soc: add binding for i.MX8MN DISP blk-ctrl
@ 2021-10-06 13:16 ` Rob Herring
0 siblings, 0 replies; 30+ messages in thread
From: Rob Herring @ 2021-10-06 13:16 UTC (permalink / raw)
To: Adam Ford
Cc: Rob Herring, Fabio Estevam, NXP Linux Team, Lucas Stach,
Shawn Guo, linux-kernel, devicetree, aford, Sascha Hauer,
Pengutronix Kernel Team, linux-arm-kernel
On Tue, 05 Oct 2021 19:04:59 -0500, Adam Ford wrote:
> This adds the DT binding for the i.MX8MN DISP blk-ctrl.
>
> Signed-off-by: Adam Ford <aford173@gmail.com>
> ---
> .../soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml | 97 +++++++++++++++++++
> 1 file changed, 97 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
./Documentation/devicetree/bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml:78:1: [error] syntax error: found character '\t' that cannot start any token (syntax)
dtschema/dtc warnings/errors:
make[1]: *** Deleting file 'Documentation/devicetree/bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.example.dts'
Traceback (most recent call last):
File "/usr/local/bin/dt-extract-example", line 45, in <module>
binding = yaml.load(open(args.yamlfile, encoding='utf-8').read())
File "/usr/local/lib/python3.8/dist-packages/ruamel/yaml/main.py", line 434, in load
return constructor.get_single_data()
File "/usr/local/lib/python3.8/dist-packages/ruamel/yaml/constructor.py", line 120, in get_single_data
node = self.composer.get_single_node()
File "_ruamel_yaml.pyx", line 706, in _ruamel_yaml.CParser.get_single_node
File "_ruamel_yaml.pyx", line 724, in _ruamel_yaml.CParser._compose_document
File "_ruamel_yaml.pyx", line 775, in _ruamel_yaml.CParser._compose_node
File "_ruamel_yaml.pyx", line 889, in _ruamel_yaml.CParser._compose_mapping_node
File "_ruamel_yaml.pyx", line 773, in _ruamel_yaml.CParser._compose_node
File "_ruamel_yaml.pyx", line 848, in _ruamel_yaml.CParser._compose_sequence_node
File "_ruamel_yaml.pyx", line 904, in _ruamel_yaml.CParser._parse_next_event
ruamel.yaml.scanner.ScannerError: while scanning a block scalar
in "<unicode string>", line 70, column 5
found a tab character where an indentation space is expected
in "<unicode string>", line 78, column 1
make[1]: *** [Documentation/devicetree/bindings/Makefile:20: Documentation/devicetree/bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.example.dts] Error 1
make[1]: *** Waiting for unfinished jobs....
./Documentation/devicetree/bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml: while scanning a block scalar
in "<unicode string>", line 70, column 5
found a tab character where an indentation space is expected
in "<unicode string>", line 78, column 1
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml: ignoring, error parsing file
warning: no schema found in file: ./Documentation/devicetree/bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml
make: *** [Makefile:1441: dt_binding_check] Error 2
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/patch/1536963
This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 30+ messages in thread
* [PATCH 3/7] soc: imx: imx8m-blk-ctrl: add i.MX8MN DISP blk-ctrl
2021-10-06 0:04 ` Adam Ford
@ 2021-10-06 0:05 ` Adam Ford
-1 siblings, 0 replies; 30+ messages in thread
From: Adam Ford @ 2021-10-06 0:05 UTC (permalink / raw)
To: linux-arm-kernel
Cc: aford, Adam Ford, Rob Herring, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
Lucas Stach, devicetree, linux-kernel
This adds the description for the i.MX8MN disp blk-ctrl.
Signed-off-by: Adam Ford <aford173@gmail.com>
---
drivers/soc/imx/imx8m-blk-ctrl.c | 70 ++++++++++++++++++++++++++++++++
1 file changed, 70 insertions(+)
diff --git a/drivers/soc/imx/imx8m-blk-ctrl.c b/drivers/soc/imx/imx8m-blk-ctrl.c
index e172d295c441..8fcd5ed62f50 100644
--- a/drivers/soc/imx/imx8m-blk-ctrl.c
+++ b/drivers/soc/imx/imx8m-blk-ctrl.c
@@ -14,6 +14,7 @@
#include <linux/clk.h>
#include <dt-bindings/power/imx8mm-power.h>
+#include <dt-bindings/power/imx8mn-power.h>
#define BLK_SFT_RSTN 0x0
#define BLK_CLK_EN 0x4
@@ -498,6 +499,75 @@ static const struct imx8m_blk_ctrl_data imx8mm_disp_blk_ctl_dev_data = {
.num_domains = ARRAY_SIZE(imx8mm_disp_blk_ctl_domain_data),
};
+
+static int imx8mn_disp_power_notifier(struct notifier_block *nb,
+ unsigned long action, void *data)
+{
+ struct imx8m_blk_ctrl *bc = container_of(nb, struct imx8m_blk_ctrl,
+ power_nb);
+
+ if (action != GENPD_NOTIFY_ON && action != GENPD_NOTIFY_PRE_OFF)
+ return NOTIFY_OK;
+
+ /* Enable bus clock and deassert bus reset */
+ regmap_set_bits(bc->regmap, BLK_CLK_EN, BIT(8));
+ regmap_set_bits(bc->regmap, BLK_SFT_RSTN, BIT(8));
+
+ /*
+ * On power up we have no software backchannel to the GPC to
+ * wait for the ADB handshake to happen, so we just delay for a
+ * bit. On power down the GPC driver waits for the handshake.
+ */
+ if (action == GENPD_NOTIFY_ON)
+ udelay(5);
+
+
+ return NOTIFY_OK;
+}
+
+static const struct imx8m_blk_ctrl_domain_data imx8mn_disp_blk_ctl_domain_data[] = {
+ [IMX8MN_DISPBLK_PD_MIPI_DSI] = {
+ .name = "dispblk-mipi-dsi",
+ .clk_names = (const char *[]){ "dsi-pclk", "dsi-ref", },
+ .num_clks = 2,
+ .gpc_name = "mipi-dsi",
+ .rst_mask = BIT(0) | BIT(1),
+ .clk_mask = BIT(0) | BIT(1),
+ },
+ [IMX8MN_DISPBLK_PD_MIPI_CSI] = {
+ .name = "dispblk-mipi-csi",
+ .clk_names = (const char *[]){ "csi-aclk", "csi-pclk" },
+ .num_clks = 2,
+ .gpc_name = "mipi-csi",
+ .rst_mask = BIT(2) | BIT(3),
+ .clk_mask = BIT(2) | BIT(3),
+ },
+ [IMX8MN_DISPBLK_PD_LCDIF] = {
+ .name = "dispblk-lcdif",
+ .clk_names = (const char *[]){ "lcdif-axi", "lcdif-apb", "lcdif-pix", },
+ .num_clks = 3,
+ .gpc_name = "lcdif",
+ .rst_mask = BIT(4) | BIT(5),
+ .clk_mask = BIT(4) | BIT(5),
+ },
+ [IMX8MN_DISPBLK_PD_ISI] = {
+ .name = "dispblk-isi",
+ .clk_names = (const char *[]){ "disp_axi", "disp_apb", "disp_axi_root",
+ "disp_apb_root"},
+ .num_clks = 2,
+ .gpc_name = "isi",
+ .rst_mask = BIT(6) | BIT(7),
+ .clk_mask = BIT(6) | BIT(7),
+ },
+};
+
+static const struct imx8m_blk_ctrl_data imx8mn_disp_blk_ctl_dev_data = {
+ .max_reg = 0x84,
+ .power_notifier_fn = imx8mn_disp_power_notifier,
+ .domains = imx8mn_disp_blk_ctl_domain_data,
+ .num_domains = ARRAY_SIZE(imx8mn_disp_blk_ctl_domain_data),
+};
+
static const struct of_device_id imx8m_blk_ctrl_of_match[] = {
{
.compatible = "fsl,imx8mm-vpu-blk-ctrl",
--
2.25.1
^ permalink raw reply related [flat|nested] 30+ messages in thread* [PATCH 3/7] soc: imx: imx8m-blk-ctrl: add i.MX8MN DISP blk-ctrl
@ 2021-10-06 0:05 ` Adam Ford
0 siblings, 0 replies; 30+ messages in thread
From: Adam Ford @ 2021-10-06 0:05 UTC (permalink / raw)
To: linux-arm-kernel
Cc: aford, Adam Ford, Rob Herring, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
Lucas Stach, devicetree, linux-kernel
This adds the description for the i.MX8MN disp blk-ctrl.
Signed-off-by: Adam Ford <aford173@gmail.com>
---
drivers/soc/imx/imx8m-blk-ctrl.c | 70 ++++++++++++++++++++++++++++++++
1 file changed, 70 insertions(+)
diff --git a/drivers/soc/imx/imx8m-blk-ctrl.c b/drivers/soc/imx/imx8m-blk-ctrl.c
index e172d295c441..8fcd5ed62f50 100644
--- a/drivers/soc/imx/imx8m-blk-ctrl.c
+++ b/drivers/soc/imx/imx8m-blk-ctrl.c
@@ -14,6 +14,7 @@
#include <linux/clk.h>
#include <dt-bindings/power/imx8mm-power.h>
+#include <dt-bindings/power/imx8mn-power.h>
#define BLK_SFT_RSTN 0x0
#define BLK_CLK_EN 0x4
@@ -498,6 +499,75 @@ static const struct imx8m_blk_ctrl_data imx8mm_disp_blk_ctl_dev_data = {
.num_domains = ARRAY_SIZE(imx8mm_disp_blk_ctl_domain_data),
};
+
+static int imx8mn_disp_power_notifier(struct notifier_block *nb,
+ unsigned long action, void *data)
+{
+ struct imx8m_blk_ctrl *bc = container_of(nb, struct imx8m_blk_ctrl,
+ power_nb);
+
+ if (action != GENPD_NOTIFY_ON && action != GENPD_NOTIFY_PRE_OFF)
+ return NOTIFY_OK;
+
+ /* Enable bus clock and deassert bus reset */
+ regmap_set_bits(bc->regmap, BLK_CLK_EN, BIT(8));
+ regmap_set_bits(bc->regmap, BLK_SFT_RSTN, BIT(8));
+
+ /*
+ * On power up we have no software backchannel to the GPC to
+ * wait for the ADB handshake to happen, so we just delay for a
+ * bit. On power down the GPC driver waits for the handshake.
+ */
+ if (action == GENPD_NOTIFY_ON)
+ udelay(5);
+
+
+ return NOTIFY_OK;
+}
+
+static const struct imx8m_blk_ctrl_domain_data imx8mn_disp_blk_ctl_domain_data[] = {
+ [IMX8MN_DISPBLK_PD_MIPI_DSI] = {
+ .name = "dispblk-mipi-dsi",
+ .clk_names = (const char *[]){ "dsi-pclk", "dsi-ref", },
+ .num_clks = 2,
+ .gpc_name = "mipi-dsi",
+ .rst_mask = BIT(0) | BIT(1),
+ .clk_mask = BIT(0) | BIT(1),
+ },
+ [IMX8MN_DISPBLK_PD_MIPI_CSI] = {
+ .name = "dispblk-mipi-csi",
+ .clk_names = (const char *[]){ "csi-aclk", "csi-pclk" },
+ .num_clks = 2,
+ .gpc_name = "mipi-csi",
+ .rst_mask = BIT(2) | BIT(3),
+ .clk_mask = BIT(2) | BIT(3),
+ },
+ [IMX8MN_DISPBLK_PD_LCDIF] = {
+ .name = "dispblk-lcdif",
+ .clk_names = (const char *[]){ "lcdif-axi", "lcdif-apb", "lcdif-pix", },
+ .num_clks = 3,
+ .gpc_name = "lcdif",
+ .rst_mask = BIT(4) | BIT(5),
+ .clk_mask = BIT(4) | BIT(5),
+ },
+ [IMX8MN_DISPBLK_PD_ISI] = {
+ .name = "dispblk-isi",
+ .clk_names = (const char *[]){ "disp_axi", "disp_apb", "disp_axi_root",
+ "disp_apb_root"},
+ .num_clks = 2,
+ .gpc_name = "isi",
+ .rst_mask = BIT(6) | BIT(7),
+ .clk_mask = BIT(6) | BIT(7),
+ },
+};
+
+static const struct imx8m_blk_ctrl_data imx8mn_disp_blk_ctl_dev_data = {
+ .max_reg = 0x84,
+ .power_notifier_fn = imx8mn_disp_power_notifier,
+ .domains = imx8mn_disp_blk_ctl_domain_data,
+ .num_domains = ARRAY_SIZE(imx8mn_disp_blk_ctl_domain_data),
+};
+
static const struct of_device_id imx8m_blk_ctrl_of_match[] = {
{
.compatible = "fsl,imx8mm-vpu-blk-ctrl",
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 30+ messages in thread* Re: [PATCH 3/7] soc: imx: imx8m-blk-ctrl: add i.MX8MN DISP blk-ctrl
2021-10-06 0:05 ` Adam Ford
@ 2021-10-06 7:45 ` Lucas Stach
-1 siblings, 0 replies; 30+ messages in thread
From: Lucas Stach @ 2021-10-06 7:45 UTC (permalink / raw)
To: Adam Ford, linux-arm-kernel
Cc: aford, Rob Herring, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
devicetree, linux-kernel
Am Dienstag, dem 05.10.2021 um 19:05 -0500 schrieb Adam Ford:
> This adds the description for the i.MX8MN disp blk-ctrl.
>
> Signed-off-by: Adam Ford <aford173@gmail.com>
> ---
> drivers/soc/imx/imx8m-blk-ctrl.c | 70 ++++++++++++++++++++++++++++++++
> 1 file changed, 70 insertions(+)
>
> diff --git a/drivers/soc/imx/imx8m-blk-ctrl.c b/drivers/soc/imx/imx8m-blk-ctrl.c
> index e172d295c441..8fcd5ed62f50 100644
> --- a/drivers/soc/imx/imx8m-blk-ctrl.c
> +++ b/drivers/soc/imx/imx8m-blk-ctrl.c
> @@ -14,6 +14,7 @@
> #include <linux/clk.h>
>
> #include <dt-bindings/power/imx8mm-power.h>
> +#include <dt-bindings/power/imx8mn-power.h>
>
> #define BLK_SFT_RSTN 0x0
> #define BLK_CLK_EN 0x4
> @@ -498,6 +499,75 @@ static const struct imx8m_blk_ctrl_data imx8mm_disp_blk_ctl_dev_data = {
> .num_domains = ARRAY_SIZE(imx8mm_disp_blk_ctl_domain_data),
> };
>
> +
> +static int imx8mn_disp_power_notifier(struct notifier_block *nb,
> + unsigned long action, void *data)
> +{
> + struct imx8m_blk_ctrl *bc = container_of(nb, struct imx8m_blk_ctrl,
> + power_nb);
> +
> + if (action != GENPD_NOTIFY_ON && action != GENPD_NOTIFY_PRE_OFF)
> + return NOTIFY_OK;
> +
> + /* Enable bus clock and deassert bus reset */
> + regmap_set_bits(bc->regmap, BLK_CLK_EN, BIT(8));
> + regmap_set_bits(bc->regmap, BLK_SFT_RSTN, BIT(8));
> +
> + /*
> + * On power up we have no software backchannel to the GPC to
> + * wait for the ADB handshake to happen, so we just delay for a
> + * bit. On power down the GPC driver waits for the handshake.
> + */
> + if (action == GENPD_NOTIFY_ON)
> + udelay(5);
> +
> +
> + return NOTIFY_OK;
> +}
> +
> +static const struct imx8m_blk_ctrl_domain_data imx8mn_disp_blk_ctl_domain_data[] = {
> + [IMX8MN_DISPBLK_PD_MIPI_DSI] = {
> + .name = "dispblk-mipi-dsi",
> + .clk_names = (const char *[]){ "dsi-pclk", "dsi-ref", },
> + .num_clks = 2,
> + .gpc_name = "mipi-dsi",
> + .rst_mask = BIT(0) | BIT(1),
> + .clk_mask = BIT(0) | BIT(1),
> + },
> + [IMX8MN_DISPBLK_PD_MIPI_CSI] = {
> + .name = "dispblk-mipi-csi",
> + .clk_names = (const char *[]){ "csi-aclk", "csi-pclk" },
> + .num_clks = 2,
> + .gpc_name = "mipi-csi",
> + .rst_mask = BIT(2) | BIT(3),
> + .clk_mask = BIT(2) | BIT(3),
> + },
> + [IMX8MN_DISPBLK_PD_LCDIF] = {
> + .name = "dispblk-lcdif",
> + .clk_names = (const char *[]){ "lcdif-axi", "lcdif-apb", "lcdif-pix", },
> + .num_clks = 3,
> + .gpc_name = "lcdif",
> + .rst_mask = BIT(4) | BIT(5),
> + .clk_mask = BIT(4) | BIT(5),
> + },
> + [IMX8MN_DISPBLK_PD_ISI] = {
> + .name = "dispblk-isi",
> + .clk_names = (const char *[]){ "disp_axi", "disp_apb", "disp_axi_root",
> + "disp_apb_root"},
> + .num_clks = 2,
I think those are wrong. At least the num_clks and the number of clock
names is inconsistent.
> + .gpc_name = "isi",
> + .rst_mask = BIT(6) | BIT(7),
> + .clk_mask = BIT(6) | BIT(7),
> + },
> +};
> +
> +static const struct imx8m_blk_ctrl_data imx8mn_disp_blk_ctl_dev_data = {
> + .max_reg = 0x84,
> + .power_notifier_fn = imx8mn_disp_power_notifier,
> + .domains = imx8mn_disp_blk_ctl_domain_data,
> + .num_domains = ARRAY_SIZE(imx8mn_disp_blk_ctl_domain_data),
> +};
> +
You need to hook this up in imx8m_blk_ctrl_of_match, otherwise this is
all just dead code.
Regards,
Lucas
> static const struct of_device_id imx8m_blk_ctrl_of_match[] = {
> {
> .compatible = "fsl,imx8mm-vpu-blk-ctrl",
^ permalink raw reply [flat|nested] 30+ messages in thread* Re: [PATCH 3/7] soc: imx: imx8m-blk-ctrl: add i.MX8MN DISP blk-ctrl
@ 2021-10-06 7:45 ` Lucas Stach
0 siblings, 0 replies; 30+ messages in thread
From: Lucas Stach @ 2021-10-06 7:45 UTC (permalink / raw)
To: Adam Ford, linux-arm-kernel
Cc: aford, Rob Herring, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
devicetree, linux-kernel
Am Dienstag, dem 05.10.2021 um 19:05 -0500 schrieb Adam Ford:
> This adds the description for the i.MX8MN disp blk-ctrl.
>
> Signed-off-by: Adam Ford <aford173@gmail.com>
> ---
> drivers/soc/imx/imx8m-blk-ctrl.c | 70 ++++++++++++++++++++++++++++++++
> 1 file changed, 70 insertions(+)
>
> diff --git a/drivers/soc/imx/imx8m-blk-ctrl.c b/drivers/soc/imx/imx8m-blk-ctrl.c
> index e172d295c441..8fcd5ed62f50 100644
> --- a/drivers/soc/imx/imx8m-blk-ctrl.c
> +++ b/drivers/soc/imx/imx8m-blk-ctrl.c
> @@ -14,6 +14,7 @@
> #include <linux/clk.h>
>
> #include <dt-bindings/power/imx8mm-power.h>
> +#include <dt-bindings/power/imx8mn-power.h>
>
> #define BLK_SFT_RSTN 0x0
> #define BLK_CLK_EN 0x4
> @@ -498,6 +499,75 @@ static const struct imx8m_blk_ctrl_data imx8mm_disp_blk_ctl_dev_data = {
> .num_domains = ARRAY_SIZE(imx8mm_disp_blk_ctl_domain_data),
> };
>
> +
> +static int imx8mn_disp_power_notifier(struct notifier_block *nb,
> + unsigned long action, void *data)
> +{
> + struct imx8m_blk_ctrl *bc = container_of(nb, struct imx8m_blk_ctrl,
> + power_nb);
> +
> + if (action != GENPD_NOTIFY_ON && action != GENPD_NOTIFY_PRE_OFF)
> + return NOTIFY_OK;
> +
> + /* Enable bus clock and deassert bus reset */
> + regmap_set_bits(bc->regmap, BLK_CLK_EN, BIT(8));
> + regmap_set_bits(bc->regmap, BLK_SFT_RSTN, BIT(8));
> +
> + /*
> + * On power up we have no software backchannel to the GPC to
> + * wait for the ADB handshake to happen, so we just delay for a
> + * bit. On power down the GPC driver waits for the handshake.
> + */
> + if (action == GENPD_NOTIFY_ON)
> + udelay(5);
> +
> +
> + return NOTIFY_OK;
> +}
> +
> +static const struct imx8m_blk_ctrl_domain_data imx8mn_disp_blk_ctl_domain_data[] = {
> + [IMX8MN_DISPBLK_PD_MIPI_DSI] = {
> + .name = "dispblk-mipi-dsi",
> + .clk_names = (const char *[]){ "dsi-pclk", "dsi-ref", },
> + .num_clks = 2,
> + .gpc_name = "mipi-dsi",
> + .rst_mask = BIT(0) | BIT(1),
> + .clk_mask = BIT(0) | BIT(1),
> + },
> + [IMX8MN_DISPBLK_PD_MIPI_CSI] = {
> + .name = "dispblk-mipi-csi",
> + .clk_names = (const char *[]){ "csi-aclk", "csi-pclk" },
> + .num_clks = 2,
> + .gpc_name = "mipi-csi",
> + .rst_mask = BIT(2) | BIT(3),
> + .clk_mask = BIT(2) | BIT(3),
> + },
> + [IMX8MN_DISPBLK_PD_LCDIF] = {
> + .name = "dispblk-lcdif",
> + .clk_names = (const char *[]){ "lcdif-axi", "lcdif-apb", "lcdif-pix", },
> + .num_clks = 3,
> + .gpc_name = "lcdif",
> + .rst_mask = BIT(4) | BIT(5),
> + .clk_mask = BIT(4) | BIT(5),
> + },
> + [IMX8MN_DISPBLK_PD_ISI] = {
> + .name = "dispblk-isi",
> + .clk_names = (const char *[]){ "disp_axi", "disp_apb", "disp_axi_root",
> + "disp_apb_root"},
> + .num_clks = 2,
I think those are wrong. At least the num_clks and the number of clock
names is inconsistent.
> + .gpc_name = "isi",
> + .rst_mask = BIT(6) | BIT(7),
> + .clk_mask = BIT(6) | BIT(7),
> + },
> +};
> +
> +static const struct imx8m_blk_ctrl_data imx8mn_disp_blk_ctl_dev_data = {
> + .max_reg = 0x84,
> + .power_notifier_fn = imx8mn_disp_power_notifier,
> + .domains = imx8mn_disp_blk_ctl_domain_data,
> + .num_domains = ARRAY_SIZE(imx8mn_disp_blk_ctl_domain_data),
> +};
> +
You need to hook this up in imx8m_blk_ctrl_of_match, otherwise this is
all just dead code.
Regards,
Lucas
> static const struct of_device_id imx8m_blk_ctrl_of_match[] = {
> {
> .compatible = "fsl,imx8mm-vpu-blk-ctrl",
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 30+ messages in thread* Re: [PATCH 3/7] soc: imx: imx8m-blk-ctrl: add i.MX8MN DISP blk-ctrl
2021-10-06 7:45 ` Lucas Stach
@ 2021-10-09 14:46 ` Adam Ford
-1 siblings, 0 replies; 30+ messages in thread
From: Adam Ford @ 2021-10-09 14:46 UTC (permalink / raw)
To: Lucas Stach
Cc: arm-soc, Adam Ford-BE, Rob Herring, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
devicetree, Linux Kernel Mailing List
On Wed, Oct 6, 2021 at 2:45 AM Lucas Stach <l.stach@pengutronix.de> wrote:
>
> Am Dienstag, dem 05.10.2021 um 19:05 -0500 schrieb Adam Ford:
> > This adds the description for the i.MX8MN disp blk-ctrl.
> >
> > Signed-off-by: Adam Ford <aford173@gmail.com>
> > ---
> > drivers/soc/imx/imx8m-blk-ctrl.c | 70 ++++++++++++++++++++++++++++++++
> > 1 file changed, 70 insertions(+)
> >
> > diff --git a/drivers/soc/imx/imx8m-blk-ctrl.c b/drivers/soc/imx/imx8m-blk-ctrl.c
> > index e172d295c441..8fcd5ed62f50 100644
> > --- a/drivers/soc/imx/imx8m-blk-ctrl.c
> > +++ b/drivers/soc/imx/imx8m-blk-ctrl.c
> > @@ -14,6 +14,7 @@
> > #include <linux/clk.h>
> >
> > #include <dt-bindings/power/imx8mm-power.h>
> > +#include <dt-bindings/power/imx8mn-power.h>
> >
> > #define BLK_SFT_RSTN 0x0
> > #define BLK_CLK_EN 0x4
> > @@ -498,6 +499,75 @@ static const struct imx8m_blk_ctrl_data imx8mm_disp_blk_ctl_dev_data = {
> > .num_domains = ARRAY_SIZE(imx8mm_disp_blk_ctl_domain_data),
> > };
> >
> > +
> > +static int imx8mn_disp_power_notifier(struct notifier_block *nb,
> > + unsigned long action, void *data)
> > +{
> > + struct imx8m_blk_ctrl *bc = container_of(nb, struct imx8m_blk_ctrl,
> > + power_nb);
> > +
> > + if (action != GENPD_NOTIFY_ON && action != GENPD_NOTIFY_PRE_OFF)
> > + return NOTIFY_OK;
> > +
> > + /* Enable bus clock and deassert bus reset */
> > + regmap_set_bits(bc->regmap, BLK_CLK_EN, BIT(8));
> > + regmap_set_bits(bc->regmap, BLK_SFT_RSTN, BIT(8));
> > +
> > + /*
> > + * On power up we have no software backchannel to the GPC to
> > + * wait for the ADB handshake to happen, so we just delay for a
> > + * bit. On power down the GPC driver waits for the handshake.
> > + */
> > + if (action == GENPD_NOTIFY_ON)
> > + udelay(5);
> > +
> > +
> > + return NOTIFY_OK;
> > +}
> > +
> > +static const struct imx8m_blk_ctrl_domain_data imx8mn_disp_blk_ctl_domain_data[] = {
> > + [IMX8MN_DISPBLK_PD_MIPI_DSI] = {
> > + .name = "dispblk-mipi-dsi",
> > + .clk_names = (const char *[]){ "dsi-pclk", "dsi-ref", },
> > + .num_clks = 2,
> > + .gpc_name = "mipi-dsi",
> > + .rst_mask = BIT(0) | BIT(1),
> > + .clk_mask = BIT(0) | BIT(1),
> > + },
> > + [IMX8MN_DISPBLK_PD_MIPI_CSI] = {
> > + .name = "dispblk-mipi-csi",
> > + .clk_names = (const char *[]){ "csi-aclk", "csi-pclk" },
> > + .num_clks = 2,
> > + .gpc_name = "mipi-csi",
> > + .rst_mask = BIT(2) | BIT(3),
> > + .clk_mask = BIT(2) | BIT(3),
> > + },
> > + [IMX8MN_DISPBLK_PD_LCDIF] = {
> > + .name = "dispblk-lcdif",
> > + .clk_names = (const char *[]){ "lcdif-axi", "lcdif-apb", "lcdif-pix", },
> > + .num_clks = 3,
> > + .gpc_name = "lcdif",
> > + .rst_mask = BIT(4) | BIT(5),
> > + .clk_mask = BIT(4) | BIT(5),
> > + },
> > + [IMX8MN_DISPBLK_PD_ISI] = {
> > + .name = "dispblk-isi",
> > + .clk_names = (const char *[]){ "disp_axi", "disp_apb", "disp_axi_root",
> > + "disp_apb_root"},
> > + .num_clks = 2,
>
> I think those are wrong. At least the num_clks and the number of clock
> names is inconsistent.
The NXP tree shows 4 clocks on the ISI node are enabled before the ISI
can be pulled out of reset. I'll make the num_clks = 4.
>
> > + .gpc_name = "isi",
> > + .rst_mask = BIT(6) | BIT(7),
> > + .clk_mask = BIT(6) | BIT(7),
> > + },
> > +};
> > +
> > +static const struct imx8m_blk_ctrl_data imx8mn_disp_blk_ctl_dev_data = {
> > + .max_reg = 0x84,
> > + .power_notifier_fn = imx8mn_disp_power_notifier,
> > + .domains = imx8mn_disp_blk_ctl_domain_data,
> > + .num_domains = ARRAY_SIZE(imx8mn_disp_blk_ctl_domain_data),
> > +};
> > +
> You need to hook this up in imx8m_blk_ctrl_of_match, otherwise this is
> all just dead code.
Oops. I had that, but i forgot to commit after the save. It'll be
fixed shortly.
>
> Regards,
> Lucas
>
thanks for the review.
adam
> > static const struct of_device_id imx8m_blk_ctrl_of_match[] = {
> > {
> > .compatible = "fsl,imx8mm-vpu-blk-ctrl",
>
>
^ permalink raw reply [flat|nested] 30+ messages in thread* Re: [PATCH 3/7] soc: imx: imx8m-blk-ctrl: add i.MX8MN DISP blk-ctrl
@ 2021-10-09 14:46 ` Adam Ford
0 siblings, 0 replies; 30+ messages in thread
From: Adam Ford @ 2021-10-09 14:46 UTC (permalink / raw)
To: Lucas Stach
Cc: arm-soc, Adam Ford-BE, Rob Herring, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
devicetree, Linux Kernel Mailing List
On Wed, Oct 6, 2021 at 2:45 AM Lucas Stach <l.stach@pengutronix.de> wrote:
>
> Am Dienstag, dem 05.10.2021 um 19:05 -0500 schrieb Adam Ford:
> > This adds the description for the i.MX8MN disp blk-ctrl.
> >
> > Signed-off-by: Adam Ford <aford173@gmail.com>
> > ---
> > drivers/soc/imx/imx8m-blk-ctrl.c | 70 ++++++++++++++++++++++++++++++++
> > 1 file changed, 70 insertions(+)
> >
> > diff --git a/drivers/soc/imx/imx8m-blk-ctrl.c b/drivers/soc/imx/imx8m-blk-ctrl.c
> > index e172d295c441..8fcd5ed62f50 100644
> > --- a/drivers/soc/imx/imx8m-blk-ctrl.c
> > +++ b/drivers/soc/imx/imx8m-blk-ctrl.c
> > @@ -14,6 +14,7 @@
> > #include <linux/clk.h>
> >
> > #include <dt-bindings/power/imx8mm-power.h>
> > +#include <dt-bindings/power/imx8mn-power.h>
> >
> > #define BLK_SFT_RSTN 0x0
> > #define BLK_CLK_EN 0x4
> > @@ -498,6 +499,75 @@ static const struct imx8m_blk_ctrl_data imx8mm_disp_blk_ctl_dev_data = {
> > .num_domains = ARRAY_SIZE(imx8mm_disp_blk_ctl_domain_data),
> > };
> >
> > +
> > +static int imx8mn_disp_power_notifier(struct notifier_block *nb,
> > + unsigned long action, void *data)
> > +{
> > + struct imx8m_blk_ctrl *bc = container_of(nb, struct imx8m_blk_ctrl,
> > + power_nb);
> > +
> > + if (action != GENPD_NOTIFY_ON && action != GENPD_NOTIFY_PRE_OFF)
> > + return NOTIFY_OK;
> > +
> > + /* Enable bus clock and deassert bus reset */
> > + regmap_set_bits(bc->regmap, BLK_CLK_EN, BIT(8));
> > + regmap_set_bits(bc->regmap, BLK_SFT_RSTN, BIT(8));
> > +
> > + /*
> > + * On power up we have no software backchannel to the GPC to
> > + * wait for the ADB handshake to happen, so we just delay for a
> > + * bit. On power down the GPC driver waits for the handshake.
> > + */
> > + if (action == GENPD_NOTIFY_ON)
> > + udelay(5);
> > +
> > +
> > + return NOTIFY_OK;
> > +}
> > +
> > +static const struct imx8m_blk_ctrl_domain_data imx8mn_disp_blk_ctl_domain_data[] = {
> > + [IMX8MN_DISPBLK_PD_MIPI_DSI] = {
> > + .name = "dispblk-mipi-dsi",
> > + .clk_names = (const char *[]){ "dsi-pclk", "dsi-ref", },
> > + .num_clks = 2,
> > + .gpc_name = "mipi-dsi",
> > + .rst_mask = BIT(0) | BIT(1),
> > + .clk_mask = BIT(0) | BIT(1),
> > + },
> > + [IMX8MN_DISPBLK_PD_MIPI_CSI] = {
> > + .name = "dispblk-mipi-csi",
> > + .clk_names = (const char *[]){ "csi-aclk", "csi-pclk" },
> > + .num_clks = 2,
> > + .gpc_name = "mipi-csi",
> > + .rst_mask = BIT(2) | BIT(3),
> > + .clk_mask = BIT(2) | BIT(3),
> > + },
> > + [IMX8MN_DISPBLK_PD_LCDIF] = {
> > + .name = "dispblk-lcdif",
> > + .clk_names = (const char *[]){ "lcdif-axi", "lcdif-apb", "lcdif-pix", },
> > + .num_clks = 3,
> > + .gpc_name = "lcdif",
> > + .rst_mask = BIT(4) | BIT(5),
> > + .clk_mask = BIT(4) | BIT(5),
> > + },
> > + [IMX8MN_DISPBLK_PD_ISI] = {
> > + .name = "dispblk-isi",
> > + .clk_names = (const char *[]){ "disp_axi", "disp_apb", "disp_axi_root",
> > + "disp_apb_root"},
> > + .num_clks = 2,
>
> I think those are wrong. At least the num_clks and the number of clock
> names is inconsistent.
The NXP tree shows 4 clocks on the ISI node are enabled before the ISI
can be pulled out of reset. I'll make the num_clks = 4.
>
> > + .gpc_name = "isi",
> > + .rst_mask = BIT(6) | BIT(7),
> > + .clk_mask = BIT(6) | BIT(7),
> > + },
> > +};
> > +
> > +static const struct imx8m_blk_ctrl_data imx8mn_disp_blk_ctl_dev_data = {
> > + .max_reg = 0x84,
> > + .power_notifier_fn = imx8mn_disp_power_notifier,
> > + .domains = imx8mn_disp_blk_ctl_domain_data,
> > + .num_domains = ARRAY_SIZE(imx8mn_disp_blk_ctl_domain_data),
> > +};
> > +
> You need to hook this up in imx8m_blk_ctrl_of_match, otherwise this is
> all just dead code.
Oops. I had that, but i forgot to commit after the save. It'll be
fixed shortly.
>
> Regards,
> Lucas
>
thanks for the review.
adam
> > static const struct of_device_id imx8m_blk_ctrl_of_match[] = {
> > {
> > .compatible = "fsl,imx8mm-vpu-blk-ctrl",
>
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 30+ messages in thread
* [PATCH 4/7] arm64: dts: imx8mn: add GPC node
2021-10-06 0:04 ` Adam Ford
@ 2021-10-06 0:05 ` Adam Ford
-1 siblings, 0 replies; 30+ messages in thread
From: Adam Ford @ 2021-10-06 0:05 UTC (permalink / raw)
To: linux-arm-kernel
Cc: aford, Adam Ford, Rob Herring, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
Lucas Stach, devicetree, linux-kernel
Add the DT node for the GPC, including all the PGC power domains,
some of them are not fully functional yet, as they require interaction
with the blk-ctrls to properly power up/down the peripherals.
Signed-off-by: Adam Ford <aford173@gmail.com>
---
arch/arm64/boot/dts/freescale/imx8mn.dtsi | 49 +++++++++++++++++++++++
1 file changed, 49 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index da6c942fb7f9..4191b5bfcdf3 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -4,6 +4,8 @@
*/
#include <dt-bindings/clock/imx8mn-clock.h>
+#include <dt-bindings/power/imx8mn-power.h>
+#include <dt-bindings/reset/imx8mq-reset.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -612,6 +614,53 @@ src: reset-controller@30390000 {
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
#reset-cells = <1>;
};
+
+ gpc: gpc@303a0000 {
+ compatible = "fsl,imx8mn-gpc";
+ reg = <0x303a0000 0x10000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+
+ pgc {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pgc_hsiomix: power-domain@0 {
+ #power-domain-cells = <0>;
+ reg = <IMX8MN_POWER_DOMAIN_HSIOMIX>;
+ clocks = <&clk IMX8MN_CLK_USB1_CTRL_ROOT>;
+ };
+
+ pgc_otg1: power-domain@1 {
+ #power-domain-cells = <0>;
+ reg = <IMX8MN_POWER_DOMAIN_OTG1>;
+ power-domains = <&pgc_hsiomix>;
+ };
+
+ pgc_gpumix: power-domain@2 {
+ #power-domain-cells = <0>;
+ reg = <IMX8MN_POWER_DOMAIN_GPUMIX>;
+ clocks = <&clk IMX8MN_CLK_GPU_CORE_ROOT>,
+ <&clk IMX8MN_CLK_GPU_SHADER_DIV>,
+ <&clk IMX8MN_CLK_GPU_BUS_ROOT>,
+ <&clk IMX8MN_CLK_GPU_AHB>;
+ resets = <&src IMX8MQ_RESET_GPU_RESET>;
+ };
+
+ pgc_dispmix: power-domain@3 {
+ #power-domain-cells = <0>;
+ reg = <IMX8MN_POWER_DOMAIN_DISPMIX>;
+ clocks = <&clk IMX8MN_CLK_DISP_AXI_ROOT>,
+ <&clk IMX8MN_CLK_DISP_APB_ROOT>;
+ };
+
+ pgc_mipi: power-domain@4 {
+ #power-domain-cells = <0>;
+ reg = <IMX8MN_POWER_DOMAIN_MIPI>;
+ power-domains = <&pgc_dispmix>;
+ };
+ };
+ };
};
aips2: bus@30400000 {
--
2.25.1
^ permalink raw reply related [flat|nested] 30+ messages in thread* [PATCH 4/7] arm64: dts: imx8mn: add GPC node
@ 2021-10-06 0:05 ` Adam Ford
0 siblings, 0 replies; 30+ messages in thread
From: Adam Ford @ 2021-10-06 0:05 UTC (permalink / raw)
To: linux-arm-kernel
Cc: aford, Adam Ford, Rob Herring, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
Lucas Stach, devicetree, linux-kernel
Add the DT node for the GPC, including all the PGC power domains,
some of them are not fully functional yet, as they require interaction
with the blk-ctrls to properly power up/down the peripherals.
Signed-off-by: Adam Ford <aford173@gmail.com>
---
arch/arm64/boot/dts/freescale/imx8mn.dtsi | 49 +++++++++++++++++++++++
1 file changed, 49 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index da6c942fb7f9..4191b5bfcdf3 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -4,6 +4,8 @@
*/
#include <dt-bindings/clock/imx8mn-clock.h>
+#include <dt-bindings/power/imx8mn-power.h>
+#include <dt-bindings/reset/imx8mq-reset.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -612,6 +614,53 @@ src: reset-controller@30390000 {
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
#reset-cells = <1>;
};
+
+ gpc: gpc@303a0000 {
+ compatible = "fsl,imx8mn-gpc";
+ reg = <0x303a0000 0x10000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+
+ pgc {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pgc_hsiomix: power-domain@0 {
+ #power-domain-cells = <0>;
+ reg = <IMX8MN_POWER_DOMAIN_HSIOMIX>;
+ clocks = <&clk IMX8MN_CLK_USB1_CTRL_ROOT>;
+ };
+
+ pgc_otg1: power-domain@1 {
+ #power-domain-cells = <0>;
+ reg = <IMX8MN_POWER_DOMAIN_OTG1>;
+ power-domains = <&pgc_hsiomix>;
+ };
+
+ pgc_gpumix: power-domain@2 {
+ #power-domain-cells = <0>;
+ reg = <IMX8MN_POWER_DOMAIN_GPUMIX>;
+ clocks = <&clk IMX8MN_CLK_GPU_CORE_ROOT>,
+ <&clk IMX8MN_CLK_GPU_SHADER_DIV>,
+ <&clk IMX8MN_CLK_GPU_BUS_ROOT>,
+ <&clk IMX8MN_CLK_GPU_AHB>;
+ resets = <&src IMX8MQ_RESET_GPU_RESET>;
+ };
+
+ pgc_dispmix: power-domain@3 {
+ #power-domain-cells = <0>;
+ reg = <IMX8MN_POWER_DOMAIN_DISPMIX>;
+ clocks = <&clk IMX8MN_CLK_DISP_AXI_ROOT>,
+ <&clk IMX8MN_CLK_DISP_APB_ROOT>;
+ };
+
+ pgc_mipi: power-domain@4 {
+ #power-domain-cells = <0>;
+ reg = <IMX8MN_POWER_DOMAIN_MIPI>;
+ power-domains = <&pgc_dispmix>;
+ };
+ };
+ };
};
aips2: bus@30400000 {
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 30+ messages in thread* Re: [PATCH 4/7] arm64: dts: imx8mn: add GPC node
2021-10-06 0:05 ` Adam Ford
@ 2021-10-06 7:48 ` Lucas Stach
-1 siblings, 0 replies; 30+ messages in thread
From: Lucas Stach @ 2021-10-06 7:48 UTC (permalink / raw)
To: Adam Ford, linux-arm-kernel
Cc: aford, Rob Herring, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
devicetree, linux-kernel
Am Dienstag, dem 05.10.2021 um 19:05 -0500 schrieb Adam Ford:
> Add the DT node for the GPC, including all the PGC power domains,
> some of them are not fully functional yet, as they require interaction
> with the blk-ctrls to properly power up/down the peripherals.
>
> Signed-off-by: Adam Ford <aford173@gmail.com>
> ---
> arch/arm64/boot/dts/freescale/imx8mn.dtsi | 49 +++++++++++++++++++++++
> 1 file changed, 49 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
> index da6c942fb7f9..4191b5bfcdf3 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
> @@ -4,6 +4,8 @@
> */
>
> #include <dt-bindings/clock/imx8mn-clock.h>
> +#include <dt-bindings/power/imx8mn-power.h>
> +#include <dt-bindings/reset/imx8mq-reset.h>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/input/input.h>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> @@ -612,6 +614,53 @@ src: reset-controller@30390000 {
> interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
> #reset-cells = <1>;
> };
> +
> + gpc: gpc@303a0000 {
> + compatible = "fsl,imx8mn-gpc";
> + reg = <0x303a0000 0x10000>;
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
> +
> + pgc {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + pgc_hsiomix: power-domain@0 {
> + #power-domain-cells = <0>;
> + reg = <IMX8MN_POWER_DOMAIN_HSIOMIX>;
> + clocks = <&clk IMX8MN_CLK_USB1_CTRL_ROOT>;
This should be IMX8MN_CLK_USB_BUS.
Regards,
Lucas
> + };
> +
> + pgc_otg1: power-domain@1 {
> + #power-domain-cells = <0>;
> + reg = <IMX8MN_POWER_DOMAIN_OTG1>;
> + power-domains = <&pgc_hsiomix>;
> + };
> +
> + pgc_gpumix: power-domain@2 {
> + #power-domain-cells = <0>;
> + reg = <IMX8MN_POWER_DOMAIN_GPUMIX>;
> + clocks = <&clk IMX8MN_CLK_GPU_CORE_ROOT>,
> + <&clk IMX8MN_CLK_GPU_SHADER_DIV>,
> + <&clk IMX8MN_CLK_GPU_BUS_ROOT>,
> + <&clk IMX8MN_CLK_GPU_AHB>;
> + resets = <&src IMX8MQ_RESET_GPU_RESET>;
> + };
> +
> + pgc_dispmix: power-domain@3 {
> + #power-domain-cells = <0>;
> + reg = <IMX8MN_POWER_DOMAIN_DISPMIX>;
> + clocks = <&clk IMX8MN_CLK_DISP_AXI_ROOT>,
> + <&clk IMX8MN_CLK_DISP_APB_ROOT>;
> + };
> +
> + pgc_mipi: power-domain@4 {
> + #power-domain-cells = <0>;
> + reg = <IMX8MN_POWER_DOMAIN_MIPI>;
> + power-domains = <&pgc_dispmix>;
> + };
> + };
> + };
> };
>
> aips2: bus@30400000 {
^ permalink raw reply [flat|nested] 30+ messages in thread* Re: [PATCH 4/7] arm64: dts: imx8mn: add GPC node
@ 2021-10-06 7:48 ` Lucas Stach
0 siblings, 0 replies; 30+ messages in thread
From: Lucas Stach @ 2021-10-06 7:48 UTC (permalink / raw)
To: Adam Ford, linux-arm-kernel
Cc: aford, Rob Herring, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
devicetree, linux-kernel
Am Dienstag, dem 05.10.2021 um 19:05 -0500 schrieb Adam Ford:
> Add the DT node for the GPC, including all the PGC power domains,
> some of them are not fully functional yet, as they require interaction
> with the blk-ctrls to properly power up/down the peripherals.
>
> Signed-off-by: Adam Ford <aford173@gmail.com>
> ---
> arch/arm64/boot/dts/freescale/imx8mn.dtsi | 49 +++++++++++++++++++++++
> 1 file changed, 49 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
> index da6c942fb7f9..4191b5bfcdf3 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
> @@ -4,6 +4,8 @@
> */
>
> #include <dt-bindings/clock/imx8mn-clock.h>
> +#include <dt-bindings/power/imx8mn-power.h>
> +#include <dt-bindings/reset/imx8mq-reset.h>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/input/input.h>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> @@ -612,6 +614,53 @@ src: reset-controller@30390000 {
> interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
> #reset-cells = <1>;
> };
> +
> + gpc: gpc@303a0000 {
> + compatible = "fsl,imx8mn-gpc";
> + reg = <0x303a0000 0x10000>;
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
> +
> + pgc {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + pgc_hsiomix: power-domain@0 {
> + #power-domain-cells = <0>;
> + reg = <IMX8MN_POWER_DOMAIN_HSIOMIX>;
> + clocks = <&clk IMX8MN_CLK_USB1_CTRL_ROOT>;
This should be IMX8MN_CLK_USB_BUS.
Regards,
Lucas
> + };
> +
> + pgc_otg1: power-domain@1 {
> + #power-domain-cells = <0>;
> + reg = <IMX8MN_POWER_DOMAIN_OTG1>;
> + power-domains = <&pgc_hsiomix>;
> + };
> +
> + pgc_gpumix: power-domain@2 {
> + #power-domain-cells = <0>;
> + reg = <IMX8MN_POWER_DOMAIN_GPUMIX>;
> + clocks = <&clk IMX8MN_CLK_GPU_CORE_ROOT>,
> + <&clk IMX8MN_CLK_GPU_SHADER_DIV>,
> + <&clk IMX8MN_CLK_GPU_BUS_ROOT>,
> + <&clk IMX8MN_CLK_GPU_AHB>;
> + resets = <&src IMX8MQ_RESET_GPU_RESET>;
> + };
> +
> + pgc_dispmix: power-domain@3 {
> + #power-domain-cells = <0>;
> + reg = <IMX8MN_POWER_DOMAIN_DISPMIX>;
> + clocks = <&clk IMX8MN_CLK_DISP_AXI_ROOT>,
> + <&clk IMX8MN_CLK_DISP_APB_ROOT>;
> + };
> +
> + pgc_mipi: power-domain@4 {
> + #power-domain-cells = <0>;
> + reg = <IMX8MN_POWER_DOMAIN_MIPI>;
> + power-domains = <&pgc_dispmix>;
> + };
> + };
> + };
> };
>
> aips2: bus@30400000 {
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 30+ messages in thread
* [PATCH 5/7] arm64: dts: imx8mn: put USB controller into power-domains
2021-10-06 0:04 ` Adam Ford
@ 2021-10-06 0:05 ` Adam Ford
-1 siblings, 0 replies; 30+ messages in thread
From: Adam Ford @ 2021-10-06 0:05 UTC (permalink / raw)
To: linux-arm-kernel
Cc: aford, Adam Ford, Rob Herring, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
Lucas Stach, devicetree, linux-kernel
Now that we have support for the power domain controller on the i.MX8MN,
we can put the USB controller in the respective power domain to allow
it to power down the PHY when possible.
Signed-off-by: Adam Ford <aford173@gmail.com>
---
arch/arm64/boot/dts/freescale/imx8mn.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index 4191b5bfcdf3..ea994dd9fb03 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -1021,6 +1021,7 @@ usbotg1: usb@32e40000 {
assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_500M>;
phys = <&usbphynop1>;
fsl,usbmisc = <&usbmisc1 0>;
+ power-domains = <&pgc_otg1>;
status = "disabled";
};
--
2.25.1
^ permalink raw reply related [flat|nested] 30+ messages in thread* [PATCH 5/7] arm64: dts: imx8mn: put USB controller into power-domains
@ 2021-10-06 0:05 ` Adam Ford
0 siblings, 0 replies; 30+ messages in thread
From: Adam Ford @ 2021-10-06 0:05 UTC (permalink / raw)
To: linux-arm-kernel
Cc: aford, Adam Ford, Rob Herring, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
Lucas Stach, devicetree, linux-kernel
Now that we have support for the power domain controller on the i.MX8MN,
we can put the USB controller in the respective power domain to allow
it to power down the PHY when possible.
Signed-off-by: Adam Ford <aford173@gmail.com>
---
arch/arm64/boot/dts/freescale/imx8mn.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index 4191b5bfcdf3..ea994dd9fb03 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -1021,6 +1021,7 @@ usbotg1: usb@32e40000 {
assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_500M>;
phys = <&usbphynop1>;
fsl,usbmisc = <&usbmisc1 0>;
+ power-domains = <&pgc_otg1>;
status = "disabled";
};
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 30+ messages in thread* Re: [PATCH 5/7] arm64: dts: imx8mn: put USB controller into power-domains
2021-10-06 0:05 ` Adam Ford
@ 2021-10-06 7:49 ` Lucas Stach
-1 siblings, 0 replies; 30+ messages in thread
From: Lucas Stach @ 2021-10-06 7:49 UTC (permalink / raw)
To: Adam Ford, linux-arm-kernel
Cc: aford, Rob Herring, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
devicetree, linux-kernel
Am Dienstag, dem 05.10.2021 um 19:05 -0500 schrieb Adam Ford:
> Now that we have support for the power domain controller on the i.MX8MN,
> we can put the USB controller in the respective power domain to allow
> it to power down the PHY when possible.
>
> Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
> ---
> arch/arm64/boot/dts/freescale/imx8mn.dtsi | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
> index 4191b5bfcdf3..ea994dd9fb03 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
> @@ -1021,6 +1021,7 @@ usbotg1: usb@32e40000 {
> assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_500M>;
> phys = <&usbphynop1>;
> fsl,usbmisc = <&usbmisc1 0>;
> + power-domains = <&pgc_otg1>;
> status = "disabled";
> };
>
^ permalink raw reply [flat|nested] 30+ messages in thread* Re: [PATCH 5/7] arm64: dts: imx8mn: put USB controller into power-domains
@ 2021-10-06 7:49 ` Lucas Stach
0 siblings, 0 replies; 30+ messages in thread
From: Lucas Stach @ 2021-10-06 7:49 UTC (permalink / raw)
To: Adam Ford, linux-arm-kernel
Cc: aford, Rob Herring, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
devicetree, linux-kernel
Am Dienstag, dem 05.10.2021 um 19:05 -0500 schrieb Adam Ford:
> Now that we have support for the power domain controller on the i.MX8MN,
> we can put the USB controller in the respective power domain to allow
> it to power down the PHY when possible.
>
> Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
> ---
> arch/arm64/boot/dts/freescale/imx8mn.dtsi | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
> index 4191b5bfcdf3..ea994dd9fb03 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
> @@ -1021,6 +1021,7 @@ usbotg1: usb@32e40000 {
> assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_500M>;
> phys = <&usbphynop1>;
> fsl,usbmisc = <&usbmisc1 0>;
> + power-domains = <&pgc_otg1>;
> status = "disabled";
> };
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 30+ messages in thread
* [PATCH 6/7] arm64: dts: imx8mn: add DISP blk-ctrl
2021-10-06 0:04 ` Adam Ford
@ 2021-10-06 0:05 ` Adam Ford
-1 siblings, 0 replies; 30+ messages in thread
From: Adam Ford @ 2021-10-06 0:05 UTC (permalink / raw)
To: linux-arm-kernel
Cc: aford, Adam Ford, Rob Herring, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
Lucas Stach, devicetree, linux-kernel
Add the DT node for the DISP blk-ctrl. With this in place the
display/mipi power domains should be functional.
Signed-off-by: Adam Ford <aford173@gmail.com>
---
arch/arm64/boot/dts/freescale/imx8mn.dtsi | 28 +++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index ea994dd9fb03..57f67257d2fd 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -1011,6 +1011,34 @@ aips4: bus@32c00000 {
#size-cells = <1>;
ranges;
+ disp_blk_ctrl: blk-ctrl@32e28000 {
+ compatible = "fsl,imx8mn-disp-blk-ctrl", "syscon";
+ reg = <0x32e28000 0x100>;
+ power-domains = <&pgc_dispmix>, <&pgc_dispmix>,
+ <&pgc_dispmix>, <&pgc_mipi>,
+ <&pgc_mipi>;
+ power-domain-names = "bus", "isi",
+ "lcdif", "mipi-dsi",
+ "mipi-csi";
+ clocks = <&clk IMX8MN_CLK_DISP_AXI>,
+ <&clk IMX8MN_CLK_DISP_APB>,
+ <&clk IMX8MN_CLK_DISP_AXI_ROOT>,
+ <&clk IMX8MN_CLK_DISP_APB_ROOT>,
+ <&clk IMX8MN_CLK_DISP_AXI_ROOT>,
+ <&clk IMX8MN_CLK_DISP_APB_ROOT>,
+ <&clk IMX8MN_CLK_DISP_PIXEL_ROOT>,
+ <&clk IMX8MN_CLK_DSI_CORE>,
+ <&clk IMX8MN_CLK_DSI_PHY_REF>,
+ <&clk IMX8MN_CLK_CSI1_PHY_REF>,
+ <&clk IMX8MN_CLK_CAMERA_PIXEL_ROOT>;
+ clock-names = "disp_axi", "disp_apb",
+ "disp_axi_root", "disp_apb_root",
+ "lcdif-axi", "lcdif-apb", "lcdif-pix",
+ "dsi-pclk", "dsi-ref",
+ "csi-aclk", "csi-pclk";
+ #power-domain-cells = <1>;
+ };
+
usbotg1: usb@32e40000 {
compatible = "fsl,imx8mn-usb", "fsl,imx7d-usb";
reg = <0x32e40000 0x200>;
--
2.25.1
^ permalink raw reply related [flat|nested] 30+ messages in thread* [PATCH 6/7] arm64: dts: imx8mn: add DISP blk-ctrl
@ 2021-10-06 0:05 ` Adam Ford
0 siblings, 0 replies; 30+ messages in thread
From: Adam Ford @ 2021-10-06 0:05 UTC (permalink / raw)
To: linux-arm-kernel
Cc: aford, Adam Ford, Rob Herring, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
Lucas Stach, devicetree, linux-kernel
Add the DT node for the DISP blk-ctrl. With this in place the
display/mipi power domains should be functional.
Signed-off-by: Adam Ford <aford173@gmail.com>
---
arch/arm64/boot/dts/freescale/imx8mn.dtsi | 28 +++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index ea994dd9fb03..57f67257d2fd 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -1011,6 +1011,34 @@ aips4: bus@32c00000 {
#size-cells = <1>;
ranges;
+ disp_blk_ctrl: blk-ctrl@32e28000 {
+ compatible = "fsl,imx8mn-disp-blk-ctrl", "syscon";
+ reg = <0x32e28000 0x100>;
+ power-domains = <&pgc_dispmix>, <&pgc_dispmix>,
+ <&pgc_dispmix>, <&pgc_mipi>,
+ <&pgc_mipi>;
+ power-domain-names = "bus", "isi",
+ "lcdif", "mipi-dsi",
+ "mipi-csi";
+ clocks = <&clk IMX8MN_CLK_DISP_AXI>,
+ <&clk IMX8MN_CLK_DISP_APB>,
+ <&clk IMX8MN_CLK_DISP_AXI_ROOT>,
+ <&clk IMX8MN_CLK_DISP_APB_ROOT>,
+ <&clk IMX8MN_CLK_DISP_AXI_ROOT>,
+ <&clk IMX8MN_CLK_DISP_APB_ROOT>,
+ <&clk IMX8MN_CLK_DISP_PIXEL_ROOT>,
+ <&clk IMX8MN_CLK_DSI_CORE>,
+ <&clk IMX8MN_CLK_DSI_PHY_REF>,
+ <&clk IMX8MN_CLK_CSI1_PHY_REF>,
+ <&clk IMX8MN_CLK_CAMERA_PIXEL_ROOT>;
+ clock-names = "disp_axi", "disp_apb",
+ "disp_axi_root", "disp_apb_root",
+ "lcdif-axi", "lcdif-apb", "lcdif-pix",
+ "dsi-pclk", "dsi-ref",
+ "csi-aclk", "csi-pclk";
+ #power-domain-cells = <1>;
+ };
+
usbotg1: usb@32e40000 {
compatible = "fsl,imx8mn-usb", "fsl,imx7d-usb";
reg = <0x32e40000 0x200>;
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 30+ messages in thread
* [PATCH 7/7] arm64: dts: imx8mn: Enable GPU
2021-10-06 0:04 ` Adam Ford
@ 2021-10-06 0:05 ` Adam Ford
-1 siblings, 0 replies; 30+ messages in thread
From: Adam Ford @ 2021-10-06 0:05 UTC (permalink / raw)
To: linux-arm-kernel
Cc: aford, Adam Ford, Rob Herring, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
Lucas Stach, devicetree, linux-kernel
The i.MX8M-Nano features a GC7000. The Etnaviv driver detects it as:
etnaviv-gpu 38000000.gpu: model: GC7000, revision: 6203
Signed-off-by: Adam Ford <aford173@gmail.com>
---
arch/arm64/boot/dts/freescale/imx8mn.dtsi | 25 +++++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index 57f67257d2fd..46144a7482d3 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -1089,6 +1089,31 @@ gpmi: nand-controller@33002000 {
status = "disabled";
};
+ gpu: gpu@38000000 {
+ compatible = "vivante,gc";
+ reg = <0x38000000 0x8000>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MN_CLK_GPU_AHB>,
+ <&clk IMX8MN_CLK_GPU_BUS_ROOT>,
+ <&clk IMX8MN_CLK_GPU_CORE_ROOT>,
+ <&clk IMX8MN_CLK_GPU_SHADER_DIV>;
+ clock-names = "reg", "bus", "core", "shader";
+ assigned-clocks = <&clk IMX8MN_CLK_GPU_CORE_SRC>,
+ <&clk IMX8MN_CLK_GPU_SHADER_SRC>,
+ <&clk IMX8MN_CLK_GPU_AXI>,
+ <&clk IMX8MN_CLK_GPU_AHB>,
+ <&clk IMX8MN_GPU_PLL>,
+ <&clk IMX8MN_CLK_GPU_CORE_DIV>,
+ <&clk IMX8MN_CLK_GPU_SHADER_DIV>;
+ assigned-clock-parents = <&clk IMX8MN_GPU_PLL_OUT>,
+ <&clk IMX8MN_GPU_PLL_OUT>,
+ <&clk IMX8MN_SYS_PLL1_800M>,
+ <&clk IMX8MN_SYS_PLL1_800M>;
+ assigned-clock-rates = <0>, <0>, <800000000>, <400000000>, <1200000000>,
+ <400000000>, <400000000>;
+ power-domains = <&pgc_gpumix>;
+ };
+
gic: interrupt-controller@38800000 {
compatible = "arm,gic-v3";
reg = <0x38800000 0x10000>,
--
2.25.1
^ permalink raw reply related [flat|nested] 30+ messages in thread* [PATCH 7/7] arm64: dts: imx8mn: Enable GPU
@ 2021-10-06 0:05 ` Adam Ford
0 siblings, 0 replies; 30+ messages in thread
From: Adam Ford @ 2021-10-06 0:05 UTC (permalink / raw)
To: linux-arm-kernel
Cc: aford, Adam Ford, Rob Herring, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
Lucas Stach, devicetree, linux-kernel
The i.MX8M-Nano features a GC7000. The Etnaviv driver detects it as:
etnaviv-gpu 38000000.gpu: model: GC7000, revision: 6203
Signed-off-by: Adam Ford <aford173@gmail.com>
---
arch/arm64/boot/dts/freescale/imx8mn.dtsi | 25 +++++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index 57f67257d2fd..46144a7482d3 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -1089,6 +1089,31 @@ gpmi: nand-controller@33002000 {
status = "disabled";
};
+ gpu: gpu@38000000 {
+ compatible = "vivante,gc";
+ reg = <0x38000000 0x8000>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MN_CLK_GPU_AHB>,
+ <&clk IMX8MN_CLK_GPU_BUS_ROOT>,
+ <&clk IMX8MN_CLK_GPU_CORE_ROOT>,
+ <&clk IMX8MN_CLK_GPU_SHADER_DIV>;
+ clock-names = "reg", "bus", "core", "shader";
+ assigned-clocks = <&clk IMX8MN_CLK_GPU_CORE_SRC>,
+ <&clk IMX8MN_CLK_GPU_SHADER_SRC>,
+ <&clk IMX8MN_CLK_GPU_AXI>,
+ <&clk IMX8MN_CLK_GPU_AHB>,
+ <&clk IMX8MN_GPU_PLL>,
+ <&clk IMX8MN_CLK_GPU_CORE_DIV>,
+ <&clk IMX8MN_CLK_GPU_SHADER_DIV>;
+ assigned-clock-parents = <&clk IMX8MN_GPU_PLL_OUT>,
+ <&clk IMX8MN_GPU_PLL_OUT>,
+ <&clk IMX8MN_SYS_PLL1_800M>,
+ <&clk IMX8MN_SYS_PLL1_800M>;
+ assigned-clock-rates = <0>, <0>, <800000000>, <400000000>, <1200000000>,
+ <400000000>, <400000000>;
+ power-domains = <&pgc_gpumix>;
+ };
+
gic: interrupt-controller@38800000 {
compatible = "arm,gic-v3";
reg = <0x38800000 0x10000>,
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 30+ messages in thread* Re: [PATCH 7/7] arm64: dts: imx8mn: Enable GPU
2021-10-06 0:05 ` Adam Ford
@ 2021-10-06 7:53 ` Lucas Stach
-1 siblings, 0 replies; 30+ messages in thread
From: Lucas Stach @ 2021-10-06 7:53 UTC (permalink / raw)
To: Adam Ford, linux-arm-kernel
Cc: aford, Rob Herring, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
devicetree, linux-kernel
Am Dienstag, dem 05.10.2021 um 19:05 -0500 schrieb Adam Ford:
> The i.MX8M-Nano features a GC7000. The Etnaviv driver detects it as:
>
> etnaviv-gpu 38000000.gpu: model: GC7000, revision: 6203
>
> Signed-off-by: Adam Ford <aford173@gmail.com>
> ---
> arch/arm64/boot/dts/freescale/imx8mn.dtsi | 25 +++++++++++++++++++++++
> 1 file changed, 25 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
> index 57f67257d2fd..46144a7482d3 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
> @@ -1089,6 +1089,31 @@ gpmi: nand-controller@33002000 {
> status = "disabled";
> };
>
> + gpu: gpu@38000000 {
> + compatible = "vivante,gc";
> + reg = <0x38000000 0x8000>;
> + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk IMX8MN_CLK_GPU_AHB>,
> + <&clk IMX8MN_CLK_GPU_BUS_ROOT>,
> + <&clk IMX8MN_CLK_GPU_CORE_ROOT>,
> + <&clk IMX8MN_CLK_GPU_SHADER_DIV>;
Last one should be just IMX8MN_CLK_GPU_SHADER.
> + clock-names = "reg", "bus", "core", "shader";
> + assigned-clocks = <&clk IMX8MN_CLK_GPU_CORE_SRC>,
> + <&clk IMX8MN_CLK_GPU_SHADER_SRC>,
> + <&clk IMX8MN_CLK_GPU_AXI>,
> + <&clk IMX8MN_CLK_GPU_AHB>,
> + <&clk IMX8MN_GPU_PLL>,
> + <&clk IMX8MN_CLK_GPU_CORE_DIV>,
> + <&clk IMX8MN_CLK_GPU_SHADER_DIV>;
_SRC and _DIV clocks are just legacy aliases for the now composite
clocks and should not be used in new DTs. Please just use the composite
clock handles directly.
Regards,
Lucas
> + assigned-clock-parents = <&clk IMX8MN_GPU_PLL_OUT>,
> + <&clk IMX8MN_GPU_PLL_OUT>,
> + <&clk IMX8MN_SYS_PLL1_800M>,
> + <&clk IMX8MN_SYS_PLL1_800M>;
> + assigned-clock-rates = <0>, <0>, <800000000>, <400000000>, <1200000000>,
> + <400000000>, <400000000>;
> + power-domains = <&pgc_gpumix>;
> + };
> +
> gic: interrupt-controller@38800000 {
> compatible = "arm,gic-v3";
> reg = <0x38800000 0x10000>,
^ permalink raw reply [flat|nested] 30+ messages in thread* Re: [PATCH 7/7] arm64: dts: imx8mn: Enable GPU
@ 2021-10-06 7:53 ` Lucas Stach
0 siblings, 0 replies; 30+ messages in thread
From: Lucas Stach @ 2021-10-06 7:53 UTC (permalink / raw)
To: Adam Ford, linux-arm-kernel
Cc: aford, Rob Herring, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
devicetree, linux-kernel
Am Dienstag, dem 05.10.2021 um 19:05 -0500 schrieb Adam Ford:
> The i.MX8M-Nano features a GC7000. The Etnaviv driver detects it as:
>
> etnaviv-gpu 38000000.gpu: model: GC7000, revision: 6203
>
> Signed-off-by: Adam Ford <aford173@gmail.com>
> ---
> arch/arm64/boot/dts/freescale/imx8mn.dtsi | 25 +++++++++++++++++++++++
> 1 file changed, 25 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
> index 57f67257d2fd..46144a7482d3 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
> @@ -1089,6 +1089,31 @@ gpmi: nand-controller@33002000 {
> status = "disabled";
> };
>
> + gpu: gpu@38000000 {
> + compatible = "vivante,gc";
> + reg = <0x38000000 0x8000>;
> + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk IMX8MN_CLK_GPU_AHB>,
> + <&clk IMX8MN_CLK_GPU_BUS_ROOT>,
> + <&clk IMX8MN_CLK_GPU_CORE_ROOT>,
> + <&clk IMX8MN_CLK_GPU_SHADER_DIV>;
Last one should be just IMX8MN_CLK_GPU_SHADER.
> + clock-names = "reg", "bus", "core", "shader";
> + assigned-clocks = <&clk IMX8MN_CLK_GPU_CORE_SRC>,
> + <&clk IMX8MN_CLK_GPU_SHADER_SRC>,
> + <&clk IMX8MN_CLK_GPU_AXI>,
> + <&clk IMX8MN_CLK_GPU_AHB>,
> + <&clk IMX8MN_GPU_PLL>,
> + <&clk IMX8MN_CLK_GPU_CORE_DIV>,
> + <&clk IMX8MN_CLK_GPU_SHADER_DIV>;
_SRC and _DIV clocks are just legacy aliases for the now composite
clocks and should not be used in new DTs. Please just use the composite
clock handles directly.
Regards,
Lucas
> + assigned-clock-parents = <&clk IMX8MN_GPU_PLL_OUT>,
> + <&clk IMX8MN_GPU_PLL_OUT>,
> + <&clk IMX8MN_SYS_PLL1_800M>,
> + <&clk IMX8MN_SYS_PLL1_800M>;
> + assigned-clock-rates = <0>, <0>, <800000000>, <400000000>, <1200000000>,
> + <400000000>, <400000000>;
> + power-domains = <&pgc_gpumix>;
> + };
> +
> gic: interrupt-controller@38800000 {
> compatible = "arm,gic-v3";
> reg = <0x38800000 0x10000>,
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 30+ messages in thread