* [Buildroot] [Bug 13146] New: raspberrypi3_defconfig: "Inappropriate ioctl for device" almost at end when sdcard.img is created
@ 2020-08-10 19:08 bugzilla at busybox.net
2020-08-10 21:24 ` [Buildroot] [Bug 13146] " bugzilla at busybox.net
` (15 more replies)
0 siblings, 16 replies; 17+ messages in thread
From: bugzilla at busybox.net @ 2020-08-10 19:08 UTC (permalink / raw)
To: buildroot
https://bugs.busybox.net/show_bug.cgi?id=13146
Bug ID: 13146
Summary: raspberrypi3_defconfig: "Inappropriate ioctl for
device" almost at end when sdcard.img is created
Product: buildroot
Version: unspecified
Hardware: PC
OS: Linux
Status: NEW
Severity: normal
Priority: P5
Component: Other
Assignee: unassigned at buildroot.uclibc.org
Reporter: marie.maurer at mmeacs.de
CC: buildroot at uclibc.org
Target Milestone: ---
Buildroot 2020-08-rc1 (make raspberrypi3_defconfig)
All default settings, on Ubuntu 20.04 LTS
?
Creating regular file
/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/rootfs.ext2
64-bit filesystem support is not enabled. The larger fields afforded by this
feature enable full-strength checksumming. Pass -O 64bit to rectify.
Creating filesystem with 122880 1k blocks and 30720 inodes
Filesystem UUID: c2097238-7b0a-451c-b38f-efe1a3cb7ebc
Superblock backups stored on blocks:
8193, 24577, 40961, 57345, 73729
Allocating group tables: done
Writing inode tables: done
Creating journal (4096 blocks): done
Copying files into the device: done
Writing superblocks and filesystem accounting information: done
ln -sf rootfs.ext2
/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/rootfs.ext4
>>> Executing post-image script board/raspberrypi3/post-image.sh
board/raspberrypi3/genimage-raspberrypi3.cfg:34: no sub-section title/index for
'config'
INFO: cmd: "mkdir -p
"/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/build/genimage.tmp""
(stderr):
INFO: cmd: "rm -rf
"/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/build/genimage.tmp"/*"
(stderr):
INFO: cmd: "mkdir -p
"/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/build/genimage.tmp""
(stderr):
INFO: cmd: "cp -a "/tmp/tmp.gaxNr8y31f"
"/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/build/genimage.tmp/root""
(stderr):
INFO: cmd: "find
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/build/genimage.tmp/root'
-depth -type d -printf '%P\0' | xargs -0 -I {} touch -r
'/tmp/tmp.gaxNr8y31f/{}'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/build/genimage.tmp/root/{}'"
(stderr):
INFO: cmd: "mkdir -p
"/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images""
(stderr):
INFO: vfat(boot.vfat): cmd: "dd if=/dev/zero
of="/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat"
seek=33554432 count=0 bs=1 2>/dev/null" (stderr):
INFO: vfat(boot.vfat): cmd: "mkdosfs
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'"
(stderr):
INFO: vfat(boot.vfat): adding file 'bcm2710-rpi-3-b.dtb' as
'bcm2710-rpi-3-b.dtb' ...
INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/bcm2710-rpi-3-b.dtb'
'::'" (stderr):
INFO: vfat(boot.vfat): adding file 'bcm2710-rpi-3-b-plus.dtb' as
'bcm2710-rpi-3-b-plus.dtb' ...
INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/bcm2710-rpi-3-b-plus.dtb'
'::'" (stderr):
INFO: vfat(boot.vfat): adding file 'bcm2710-rpi-cm3.dtb' as
'bcm2710-rpi-cm3.dtb' ...
INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/bcm2710-rpi-cm3.dtb'
'::'" (stderr):
INFO: vfat(boot.vfat): adding file 'rpi-firmware/bootcode.bin' as
'rpi-firmware/bootcode.bin' ...
INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/rpi-firmware/bootcode.bin'
'::'" (stderr):
INFO: vfat(boot.vfat): adding file 'rpi-firmware/cmdline.txt' as
'rpi-firmware/cmdline.txt' ...
INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/rpi-firmware/cmdline.txt'
'::'" (stderr):
INFO: vfat(boot.vfat): adding file 'rpi-firmware/config.txt' as
'rpi-firmware/config.txt' ...
INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/rpi-firmware/config.txt'
'::'" (stderr):
INFO: vfat(boot.vfat): adding file 'rpi-firmware/fixup.dat' as
'rpi-firmware/fixup.dat' ...
INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/rpi-firmware/fixup.dat'
'::'" (stderr):
INFO: vfat(boot.vfat): adding file 'rpi-firmware/start.elf' as
'rpi-firmware/start.elf' ...
INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/rpi-firmware/start.elf'
'::'" (stderr):
INFO: vfat(boot.vfat): adding file 'rpi-firmware/overlays' as
'rpi-firmware/overlays' ...
INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/rpi-firmware/overlays'
'::'" (stderr):
INFO: vfat(boot.vfat): adding file 'zImage' as 'zImage' ...
INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/zImage'
'::'" (stderr):
INFO: hdimage(sdcard.img): adding partition 'boot' (in MBR) from 'boot.vfat'
...
ERROR: hdimage(sdcard.img): fiemap
/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat:
25 Inappropriate ioctl for device
ERROR: hdimage(sdcard.img): failed to write image partition 'boot'
INFO: hdimage(sdcard.img): cmd: "rm -f
"/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/sdcard.img""
(stderr):
ERROR: hdimage(sdcard.img): failed to generate sdcard.img
make: *** [Makefile:835: target-post-image] Error 1
--
You are receiving this mail because:
You are on the CC list for the bug.
^ permalink raw reply [flat|nested] 17+ messages in thread
* [Buildroot] [Bug 13146] raspberrypi3_defconfig: "Inappropriate ioctl for device" almost at end when sdcard.img is created
2020-08-10 19:08 [Buildroot] [Bug 13146] New: raspberrypi3_defconfig: "Inappropriate ioctl for device" almost at end when sdcard.img is created bugzilla at busybox.net
@ 2020-08-10 21:24 ` bugzilla at busybox.net
2020-08-11 6:59 ` bugzilla at busybox.net
` (14 subsequent siblings)
15 siblings, 0 replies; 17+ messages in thread
From: bugzilla at busybox.net @ 2020-08-10 21:24 UTC (permalink / raw)
To: buildroot
https://bugs.busybox.net/show_bug.cgi?id=13146
--- Comment #1 from Peter Seiderer <ps.report@gmx.net> ---
Does not happen here (openSUSE Tumbleweed, ext4 filesystem), which filesystem
do you use?
The fiemap feature was introduces lately in genimage (see [1]), and there is a
fallback in case the fiemap ioctl fails (see [2]):
/* If failure is due to no filesystem support, return a single extent
*/
if (ret == -EOPNOTSUPP)
return whole_file_exent(size, extents, extent_count);
You can try to extend this check for ENOTTY (25) like the following:
if (ret == -EOPNOTSUPP || ret == -ENOTTY)
or more correct (as 'ret = -errno;' some lines above):
if (ret == EOPNOTSUPP || ret == ENOTTY)
and/or fallback to an earlier version of genimage in buildroot
by reverting the latest version bump commit [3]...
[1]
https://github.com/pengutronix/genimage/commit/1b98d6fadfca76cc0202a2df3debc67a8fe0ee1a
[2] https://github.com/pengutronix/genimage/blob/master/util.c#L390
[3]
https://git.buildroot.net/buildroot/commit/?id=677b0d9f574e2860cd22cb36022e5c059b4e6af5
--
You are receiving this mail because:
You are on the CC list for the bug.
^ permalink raw reply [flat|nested] 17+ messages in thread
* [Buildroot] [Bug 13146] raspberrypi3_defconfig: "Inappropriate ioctl for device" almost at end when sdcard.img is created
2020-08-10 19:08 [Buildroot] [Bug 13146] New: raspberrypi3_defconfig: "Inappropriate ioctl for device" almost at end when sdcard.img is created bugzilla at busybox.net
2020-08-10 21:24 ` [Buildroot] [Bug 13146] " bugzilla at busybox.net
@ 2020-08-11 6:59 ` bugzilla at busybox.net
2020-08-11 7:24 ` bugzilla at busybox.net
` (13 subsequent siblings)
15 siblings, 0 replies; 17+ messages in thread
From: bugzilla at busybox.net @ 2020-08-11 6:59 UTC (permalink / raw)
To: buildroot
https://bugs.busybox.net/show_bug.cgi?id=13146
--- Comment #2 from Marie Maurer <marie.maurer@mmeacs.de> ---
Some additional information:
I compiled in WSL (Ubuntu 20.04 LTS) under Windows 10:
marie at 2020L009:~$ mount
rootfs on / type lxfs (rw,noatime)
none on /dev type tmpfs (rw,noatime,mode=755)
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,noatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,noatime)
devpts on /dev/pts type devpts (rw,nosuid,noexec,noatime,gid=5,mode=620)
none on /run type tmpfs (rw,nosuid,noexec,noatime,mode=755)
none on /run/lock type tmpfs (rw,nosuid,nodev,noexec,noatime)
none on /run/shm type tmpfs (rw,nosuid,nodev,noatime)
none on /run/user type tmpfs (rw,nosuid,nodev,noexec,noatime,mode=755)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,relatime)
tmpfs on /sys/fs/cgroup type tmpfs (rw,nosuid,nodev,noexec,relatime,mode=755)
cgroup on /sys/fs/cgroup/devices type cgroup
(rw,nosuid,nodev,noexec,relatime,devices)
C:\ on /mnt/c type drvfs (rw,noatime,uid=1000,gid=1000,case=off)
marie at 2020L009:~$ pwd
/home/marie
--
You are receiving this mail because:
You are on the CC list for the bug.
^ permalink raw reply [flat|nested] 17+ messages in thread
* [Buildroot] [Bug 13146] raspberrypi3_defconfig: "Inappropriate ioctl for device" almost at end when sdcard.img is created
2020-08-10 19:08 [Buildroot] [Bug 13146] New: raspberrypi3_defconfig: "Inappropriate ioctl for device" almost at end when sdcard.img is created bugzilla at busybox.net
2020-08-10 21:24 ` [Buildroot] [Bug 13146] " bugzilla at busybox.net
2020-08-11 6:59 ` bugzilla at busybox.net
@ 2020-08-11 7:24 ` bugzilla at busybox.net
2020-08-11 7:26 ` bugzilla at busybox.net
` (12 subsequent siblings)
15 siblings, 0 replies; 17+ messages in thread
From: bugzilla at busybox.net @ 2020-08-11 7:24 UTC (permalink / raw)
To: buildroot
https://bugs.busybox.net/show_bug.cgi?id=13146
--- Comment #3 from Marie Maurer <marie.maurer@mmeacs.de> ---
I added second suggested line and called "make" again.
Now I get the following output:
>>> Generating filesystem image rootfs.ext2
mkdir -p /home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images
rm -rf
/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/build/buildroot-fs/ext2
mkdir -p
/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/build/buildroot-fs/ext2
rsync -auH --exclude=/THIS_IS_NOT_YOUR_ROOT_FILESYSTEM
/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/target/
/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/build/buildroot-fs/ext2/target
echo '#!/bin/sh' >
/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/build/buildroot-fs/ext2/fakeroot
echo "set -e" >>
/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/build/buildroot-fs/ext2/fakeroot
echo "chown -h -R 0:0
/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/build/buildroot-fs/ext2/target"
>>
/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/build/buildroot-fs/ext2/fakeroot
PATH="/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/host/bin:/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/mnt/c/Program
Files/WindowsApps/CanonicalGroupLimited.UbuntuonWindows_2004.2020.424.0_x64__79rhkp1fndgsc:/mnt/c/Program
Files (x86)/Common
Files/Oracle/Java/javapath:/mnt/c/WINDOWS/system32:/mnt/c/WINDOWS:/mnt/c/WINDOWS/System32/Wbem:/mnt/c/WINDOWS/System32/WindowsPowerShell/v1.0/:/mnt/c/WINDOWS/System32/OpenSSH/:/mnt/c/Program
Files/TortoiseGit/bin:/mnt/c/Program Files/Git/cmd:/mnt/c/Program Files/Nordic
Semiconductor/nrf-command-line-tools/bin/:/mnt/c/Program Files
(x86)/STMicroelectronics/STM32 ST-LINK Utility/ST-LINK
Utility:/mnt/c/Users/marie.maurer/AppData/Local/Microsoft/WindowsApps:/mnt/c/util:/mnt/c/users/marie.maurer/appdata/local/programs/python/python38/Scripts:/snap/bin"
/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/support/scripts/mkusers
/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/build/buildroot-fs/full_users_table.txt
/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/build/buildroot-fs/ext2/target
>>
/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/build/buildroot-fs/ext2/fakeroot
echo
"/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/host/bin/makedevs
-d
/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/build/buildroot-fs/full_devices_table.txt
/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/build/buildroot-fs/ext2/target"
>>
/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/build/buildroot-fs/ext2/fakeroot
printf ' \n' >>
/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/build/buildroot-fs/ext2/fakeroot
printf ' rm -f
/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/rootfs.ext2\n
/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/host/sbin/mkfs.ext4
-d
/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/build/buildroot-fs/ext2/target
-r 1 -N 0 -m 5 -L "rootfs" -O ^64bit
/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/rootfs.ext2
"120M" || { ret=$?; echo "*** Maybe you need to increase the filesystem size
(BR2_TARGET_ROOTFS_EXT2_SIZE)" 1>&2; exit $ret; }\n' >>
/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/build/buildroot-fs/ext2/fakeroot
chmod a+x
/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/build/buildroot-fs/ext2/fakeroot
PATH="/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/host/bin:/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/mnt/c/Program
Files/WindowsApps/CanonicalGroupLimited.UbuntuonWindows_2004.2020.424.0_x64__79rhkp1fndgsc:/mnt/c/Program
Files (x86)/Common
Files/Oracle/Java/javapath:/mnt/c/WINDOWS/system32:/mnt/c/WINDOWS:/mnt/c/WINDOWS/System32/Wbem:/mnt/c/WINDOWS/System32/WindowsPowerShell/v1.0/:/mnt/c/WINDOWS/System32/OpenSSH/:/mnt/c/Program
Files/TortoiseGit/bin:/mnt/c/Program Files/Git/cmd:/mnt/c/Program Files/Nordic
Semiconductor/nrf-command-line-tools/bin/:/mnt/c/Program Files
(x86)/STMicroelectronics/STM32 ST-LINK Utility/ST-LINK
Utility:/mnt/c/Users/marie.maurer/AppData/Local/Microsoft/WindowsApps:/mnt/c/util:/mnt/c/users/marie.maurer/appdata/local/programs/python/python38/Scripts:/snap/bin"
FAKEROOTDONTTRYCHOWN=1
/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/host/bin/fakeroot
--
/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/build/buildroot-fs/ext2/fakeroot
rootdir=/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/build/buildroot-fs/ext2/target
table='/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/build/buildroot-fs/full_devices_table.txt'
mke2fs 1.45.6 (20-Mar-2020)
Creating regular file
/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/rootfs.ext2
64-bit filesystem support is not enabled. The larger fields afforded by this
feature enable full-strength checksumming. Pass -O 64bit to rectify.
Creating filesystem with 122880 1k blocks and 30720 inodes
Filesystem UUID: c81809b4-af64-4851-83b9-838060850343
Superblock backups stored on blocks:
8193, 24577, 40961, 57345, 73729
Allocating group tables: done
Writing inode tables: done
Creating journal (4096 blocks): done
Copying files into the device: done
Writing superblocks and filesystem accounting information: done
ln -sf rootfs.ext2
/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/rootfs.ext4
>>> Executing post-image script board/raspberrypi3/post-image.sh
board/raspberrypi3/genimage-raspberrypi3.cfg:34: no sub-section title/index for
'config'
INFO: cmd: "mkdir -p
"/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/build/genimage.tmp""
(stderr):
INFO: cmd: "rm -rf
"/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/build/genimage.tmp"/*"
(stderr):
INFO: cmd: "mkdir -p
"/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/build/genimage.tmp""
(stderr):
INFO: cmd: "cp -a "/tmp/tmp.gpxMoEOrt8"
"/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/build/genimage.tmp/root""
(stderr):
INFO: cmd: "find
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/build/genimage.tmp/root'
-depth -type d -printf '%P\0' | xargs -0 -I {} touch -r
'/tmp/tmp.gpxMoEOrt8/{}'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/build/genimage.tmp/root/{}'"
(stderr):
INFO: cmd: "mkdir -p
"/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images""
(stderr):
INFO: vfat(boot.vfat): cmd: "dd if=/dev/zero
of="/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat"
seek=33554432 count=0 bs=1 2>/dev/null" (stderr):
INFO: vfat(boot.vfat): cmd: "mkdosfs
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'"
(stderr):
INFO: vfat(boot.vfat): adding file 'bcm2710-rpi-3-b.dtb' as
'bcm2710-rpi-3-b.dtb' ...
INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/bcm2710-rpi-3-b.dtb'
'::'" (stderr):
INFO: vfat(boot.vfat): adding file 'bcm2710-rpi-3-b-plus.dtb' as
'bcm2710-rpi-3-b-plus.dtb' ...
INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/bcm2710-rpi-3-b-plus.dtb'
'::'" (stderr):
INFO: vfat(boot.vfat): adding file 'bcm2710-rpi-cm3.dtb' as
'bcm2710-rpi-cm3.dtb' ...
INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/bcm2710-rpi-cm3.dtb'
'::'" (stderr):
INFO: vfat(boot.vfat): adding file 'rpi-firmware/bootcode.bin' as
'rpi-firmware/bootcode.bin' ...
INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/rpi-firmware/bootcode.bin'
'::'" (stderr):
INFO: vfat(boot.vfat): adding file 'rpi-firmware/cmdline.txt' as
'rpi-firmware/cmdline.txt' ...
INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/rpi-firmware/cmdline.txt'
'::'" (stderr):
INFO: vfat(boot.vfat): adding file 'rpi-firmware/config.txt' as
'rpi-firmware/config.txt' ...
INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/rpi-firmware/config.txt'
'::'" (stderr):
INFO: vfat(boot.vfat): adding file 'rpi-firmware/fixup.dat' as
'rpi-firmware/fixup.dat' ...
INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/rpi-firmware/fixup.dat'
'::'" (stderr):
INFO: vfat(boot.vfat): adding file 'rpi-firmware/start.elf' as
'rpi-firmware/start.elf' ...
INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/rpi-firmware/start.elf'
'::'" (stderr):
INFO: vfat(boot.vfat): adding file 'rpi-firmware/overlays' as
'rpi-firmware/overlays' ...
INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/rpi-firmware/overlays'
'::'" (stderr):
INFO: vfat(boot.vfat): adding file 'zImage' as 'zImage' ...
INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/zImage'
'::'" (stderr):
INFO: hdimage(sdcard.img): adding partition 'boot' (in MBR) from 'boot.vfat'
...
ERROR: hdimage(sdcard.img): fiemap
/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat:
25 Inappropriate ioctl for device
ERROR: hdimage(sdcard.img): failed to write image partition 'boot'
INFO: hdimage(sdcard.img): cmd: "rm -f
"/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/sdcard.img""
(stderr):
ERROR: hdimage(sdcard.img): failed to generate sdcard.img
make: *** [Makefile:835: target-post-image] Error 1
--
You are receiving this mail because:
You are on the CC list for the bug.
^ permalink raw reply [flat|nested] 17+ messages in thread
* [Buildroot] [Bug 13146] raspberrypi3_defconfig: "Inappropriate ioctl for device" almost at end when sdcard.img is created
2020-08-10 19:08 [Buildroot] [Bug 13146] New: raspberrypi3_defconfig: "Inappropriate ioctl for device" almost at end when sdcard.img is created bugzilla at busybox.net
` (2 preceding siblings ...)
2020-08-11 7:24 ` bugzilla at busybox.net
@ 2020-08-11 7:26 ` bugzilla at busybox.net
2020-08-11 7:38 ` bugzilla at busybox.net
` (11 subsequent siblings)
15 siblings, 0 replies; 17+ messages in thread
From: bugzilla at busybox.net @ 2020-08-11 7:26 UTC (permalink / raw)
To: buildroot
https://bugs.busybox.net/show_bug.cgi?id=13146
--- Comment #4 from Marie Maurer <marie.maurer@mmeacs.de> ---
(In reply to Marie Maurer from comment #3)
Wrong log output in previous comment, sorry!
Here is the right one:
>>> Executing post-image script board/raspberrypi3/post-image.sh
board/raspberrypi3/genimage-raspberrypi3.cfg:34: no sub-section title/index for
'config'
INFO: cmd: "mkdir -p
"/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/build/genimage.tmp""
(stderr):
INFO: cmd: "rm -rf
"/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/build/genimage.tmp"/*"
(stderr):
INFO: cmd: "mkdir -p
"/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/build/genimage.tmp""
(stderr):
INFO: cmd: "cp -a "/tmp/tmp.gpxMoEOrt8"
"/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/build/genimage.tmp/root""
(stderr):
INFO: cmd: "find
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/build/genimage.tmp/root'
-depth -type d -printf '%P\0' | xargs -0 -I {} touch -r
'/tmp/tmp.gpxMoEOrt8/{}'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/build/genimage.tmp/root/{}'"
(stderr):
INFO: cmd: "mkdir -p
"/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images""
(stderr):
INFO: vfat(boot.vfat): cmd: "dd if=/dev/zero
of="/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat"
seek=33554432 count=0 bs=1 2>/dev/null" (stderr):
INFO: vfat(boot.vfat): cmd: "mkdosfs
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'"
(stderr):
INFO: vfat(boot.vfat): adding file 'bcm2710-rpi-3-b.dtb' as
'bcm2710-rpi-3-b.dtb' ...
INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/bcm2710-rpi-3-b.dtb'
'::'" (stderr):
INFO: vfat(boot.vfat): adding file 'bcm2710-rpi-3-b-plus.dtb' as
'bcm2710-rpi-3-b-plus.dtb' ...
INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/bcm2710-rpi-3-b-plus.dtb'
'::'" (stderr):
INFO: vfat(boot.vfat): adding file 'bcm2710-rpi-cm3.dtb' as
'bcm2710-rpi-cm3.dtb' ...
INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/bcm2710-rpi-cm3.dtb'
'::'" (stderr):
INFO: vfat(boot.vfat): adding file 'rpi-firmware/bootcode.bin' as
'rpi-firmware/bootcode.bin' ...
INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/rpi-firmware/bootcode.bin'
'::'" (stderr):
INFO: vfat(boot.vfat): adding file 'rpi-firmware/cmdline.txt' as
'rpi-firmware/cmdline.txt' ...
INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/rpi-firmware/cmdline.txt'
'::'" (stderr):
INFO: vfat(boot.vfat): adding file 'rpi-firmware/config.txt' as
'rpi-firmware/config.txt' ...
INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/rpi-firmware/config.txt'
'::'" (stderr):
INFO: vfat(boot.vfat): adding file 'rpi-firmware/fixup.dat' as
'rpi-firmware/fixup.dat' ...
INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/rpi-firmware/fixup.dat'
'::'" (stderr):
INFO: vfat(boot.vfat): adding file 'rpi-firmware/start.elf' as
'rpi-firmware/start.elf' ...
INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/rpi-firmware/start.elf'
'::'" (stderr):
INFO: vfat(boot.vfat): adding file 'rpi-firmware/overlays' as
'rpi-firmware/overlays' ...
INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/rpi-firmware/overlays'
'::'" (stderr):
INFO: vfat(boot.vfat): adding file 'zImage' as 'zImage' ...
INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/zImage'
'::'" (stderr):
INFO: hdimage(sdcard.img): adding partition 'boot' (in MBR) from 'boot.vfat'
...
ERROR: hdimage(sdcard.img): fiemap
/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat:
25 Inappropriate ioctl for device
ERROR: hdimage(sdcard.img): failed to write image partition 'boot'
INFO: hdimage(sdcard.img): cmd: "rm -f
"/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/sdcard.img""
(stderr):
ERROR: hdimage(sdcard.img): failed to generate sdcard.img
make: *** [Makefile:835: target-post-image] Error 1
--
You are receiving this mail because:
You are on the CC list for the bug.
^ permalink raw reply [flat|nested] 17+ messages in thread
* [Buildroot] [Bug 13146] raspberrypi3_defconfig: "Inappropriate ioctl for device" almost at end when sdcard.img is created
2020-08-10 19:08 [Buildroot] [Bug 13146] New: raspberrypi3_defconfig: "Inappropriate ioctl for device" almost at end when sdcard.img is created bugzilla at busybox.net
` (3 preceding siblings ...)
2020-08-11 7:26 ` bugzilla at busybox.net
@ 2020-08-11 7:38 ` bugzilla at busybox.net
2020-08-11 15:47 ` bugzilla at busybox.net
` (10 subsequent siblings)
15 siblings, 0 replies; 17+ messages in thread
From: bugzilla at busybox.net @ 2020-08-11 7:38 UTC (permalink / raw)
To: buildroot
https://bugs.busybox.net/show_bug.cgi?id=13146
--- Comment #5 from Marie Maurer <marie.maurer@mmeacs.de> ---
I had to use this line to get it working:
if (ret == -EOPNOTSUPP || ret == -ENOTTY)
Now a sdcard.img was generated. No more error message.
--
You are receiving this mail because:
You are on the CC list for the bug.
^ permalink raw reply [flat|nested] 17+ messages in thread
* [Buildroot] [Bug 13146] raspberrypi3_defconfig: "Inappropriate ioctl for device" almost at end when sdcard.img is created
2020-08-10 19:08 [Buildroot] [Bug 13146] New: raspberrypi3_defconfig: "Inappropriate ioctl for device" almost at end when sdcard.img is created bugzilla at busybox.net
` (4 preceding siblings ...)
2020-08-11 7:38 ` bugzilla at busybox.net
@ 2020-08-11 15:47 ` bugzilla at busybox.net
2020-08-11 16:58 ` bugzilla at busybox.net
` (9 subsequent siblings)
15 siblings, 0 replies; 17+ messages in thread
From: bugzilla at busybox.net @ 2020-08-11 15:47 UTC (permalink / raw)
To: buildroot
https://bugs.busybox.net/show_bug.cgi?id=13146
Yann E. MORIN <yann.morin.1998@free.fr> changed:
What |Removed |Added
----------------------------------------------------------------------------
CC| |yann.morin.1998 at free.fr
Resolution|--- |WORKSFORME
Status|NEW |RESOLVED
--- Comment #6 from Yann E. MORIN <yann.morin.1998@free.fr> ---
I've just given a test-build in Ubuntu 20.04, on augfs over ext4 (in docker),
and the build succeeds without issue (as ;aready reported by Peter).
Can you provide more info on your running environment:
- what distribution?
- what filesystem?
- are you running in WSL (windows Subsystem for Linux)? What version?
Note that running under WSL1 is not guaranteed to work. WSL2 is also very
very seldom tested.
--
You are receiving this mail because:
You are on the CC list for the bug.
^ permalink raw reply [flat|nested] 17+ messages in thread
* [Buildroot] [Bug 13146] raspberrypi3_defconfig: "Inappropriate ioctl for device" almost at end when sdcard.img is created
2020-08-10 19:08 [Buildroot] [Bug 13146] New: raspberrypi3_defconfig: "Inappropriate ioctl for device" almost at end when sdcard.img is created bugzilla at busybox.net
` (5 preceding siblings ...)
2020-08-11 15:47 ` bugzilla at busybox.net
@ 2020-08-11 16:58 ` bugzilla at busybox.net
2020-08-11 17:00 ` bugzilla at busybox.net
` (8 subsequent siblings)
15 siblings, 0 replies; 17+ messages in thread
From: bugzilla at busybox.net @ 2020-08-11 16:58 UTC (permalink / raw)
To: buildroot
https://bugs.busybox.net/show_bug.cgi?id=13146
--- Comment #7 from Marie Maurer <marie.maurer@mmeacs.de> ---
I compiled in WSL (Ubuntu 20.04 LTS) under Windows 10.
I think since yesterday it updated to 20.04.1?
I don't know WSL version. How to get it?
--
You are receiving this mail because:
You are on the CC list for the bug.
^ permalink raw reply [flat|nested] 17+ messages in thread
* [Buildroot] [Bug 13146] raspberrypi3_defconfig: "Inappropriate ioctl for device" almost at end when sdcard.img is created
2020-08-10 19:08 [Buildroot] [Bug 13146] New: raspberrypi3_defconfig: "Inappropriate ioctl for device" almost at end when sdcard.img is created bugzilla at busybox.net
` (6 preceding siblings ...)
2020-08-11 16:58 ` bugzilla at busybox.net
@ 2020-08-11 17:00 ` bugzilla at busybox.net
2020-08-11 19:27 ` bugzilla at busybox.net
` (7 subsequent siblings)
15 siblings, 0 replies; 17+ messages in thread
From: bugzilla at busybox.net @ 2020-08-11 17:00 UTC (permalink / raw)
To: buildroot
https://bugs.busybox.net/show_bug.cgi?id=13146
--- Comment #8 from Marie Maurer <marie.maurer@mmeacs.de> ---
Regarding Filesystem: See https://bugs.busybox.net/show_bug.cgi?id=13146#c2
--
You are receiving this mail because:
You are on the CC list for the bug.
^ permalink raw reply [flat|nested] 17+ messages in thread
* [Buildroot] [Bug 13146] raspberrypi3_defconfig: "Inappropriate ioctl for device" almost at end when sdcard.img is created
2020-08-10 19:08 [Buildroot] [Bug 13146] New: raspberrypi3_defconfig: "Inappropriate ioctl for device" almost at end when sdcard.img is created bugzilla at busybox.net
` (7 preceding siblings ...)
2020-08-11 17:00 ` bugzilla at busybox.net
@ 2020-08-11 19:27 ` bugzilla at busybox.net
2020-08-11 19:31 ` bugzilla at busybox.net
` (6 subsequent siblings)
15 siblings, 0 replies; 17+ messages in thread
From: bugzilla at busybox.net @ 2020-08-11 19:27 UTC (permalink / raw)
To: buildroot
https://bugs.busybox.net/show_bug.cgi?id=13146
--- Comment #9 from Peter Seiderer <ps.report@gmx.net> ---
(In reply to Marie Maurer from comment #5)
Thanks for feedback, good to hear it now works for you (the version without the
minus sign was definitely wrong, did read the code wrong yesterday)...
--
You are receiving this mail because:
You are on the CC list for the bug.
^ permalink raw reply [flat|nested] 17+ messages in thread
* [Buildroot] [Bug 13146] raspberrypi3_defconfig: "Inappropriate ioctl for device" almost at end when sdcard.img is created
2020-08-10 19:08 [Buildroot] [Bug 13146] New: raspberrypi3_defconfig: "Inappropriate ioctl for device" almost at end when sdcard.img is created bugzilla at busybox.net
` (8 preceding siblings ...)
2020-08-11 19:27 ` bugzilla at busybox.net
@ 2020-08-11 19:31 ` bugzilla at busybox.net
2020-08-11 19:33 ` bugzilla at busybox.net
` (5 subsequent siblings)
15 siblings, 0 replies; 17+ messages in thread
From: bugzilla at busybox.net @ 2020-08-11 19:31 UTC (permalink / raw)
To: buildroot
https://bugs.busybox.net/show_bug.cgi?id=13146
--- Comment #10 from Peter Seiderer <ps.report@gmx.net> ---
(In reply to Yann E. MORIN from comment #6)
Is resolved/worksforme not a little harsh as there is definitely a existing
problem (and a fix for it) and not yet determined if it is caused by the
filesystem and/or a WSL?
--
You are receiving this mail because:
You are on the CC list for the bug.
^ permalink raw reply [flat|nested] 17+ messages in thread
* [Buildroot] [Bug 13146] raspberrypi3_defconfig: "Inappropriate ioctl for device" almost at end when sdcard.img is created
2020-08-10 19:08 [Buildroot] [Bug 13146] New: raspberrypi3_defconfig: "Inappropriate ioctl for device" almost at end when sdcard.img is created bugzilla at busybox.net
` (9 preceding siblings ...)
2020-08-11 19:31 ` bugzilla at busybox.net
@ 2020-08-11 19:33 ` bugzilla at busybox.net
2020-08-11 20:10 ` bugzilla at busybox.net
` (4 subsequent siblings)
15 siblings, 0 replies; 17+ messages in thread
From: bugzilla at busybox.net @ 2020-08-11 19:33 UTC (permalink / raw)
To: buildroot
https://bugs.busybox.net/show_bug.cgi?id=13146
--- Comment #11 from Peter Seiderer <ps.report@gmx.net> ---
(In reply to Marie Maurer from comment #5)
Mind to suggest the patch/fix upstream (pengutronix/genimage)?
--
You are receiving this mail because:
You are on the CC list for the bug.
^ permalink raw reply [flat|nested] 17+ messages in thread
* [Buildroot] [Bug 13146] raspberrypi3_defconfig: "Inappropriate ioctl for device" almost at end when sdcard.img is created
2020-08-10 19:08 [Buildroot] [Bug 13146] New: raspberrypi3_defconfig: "Inappropriate ioctl for device" almost at end when sdcard.img is created bugzilla at busybox.net
` (10 preceding siblings ...)
2020-08-11 19:33 ` bugzilla at busybox.net
@ 2020-08-11 20:10 ` bugzilla at busybox.net
2020-08-11 20:14 ` bugzilla at busybox.net
` (3 subsequent siblings)
15 siblings, 0 replies; 17+ messages in thread
From: bugzilla at busybox.net @ 2020-08-11 20:10 UTC (permalink / raw)
To: buildroot
https://bugs.busybox.net/show_bug.cgi?id=13146
--- Comment #12 from Yann E. MORIN <yann.morin.1998@free.fr> ---
(In reply to Peter Seiderer from comment #10)
> Is resolved/worksforme not a little harsh as there is definitely a existing
> problem (and a fix for it) and not yet determined if it is caused by the
> filesystem and/or a WSL?
genimage does not work on WSL1 (from a previous IRC discussion some weeks
ago); WSL1 was too limited to be really workable anyway. It *might* work on
WSL2 (WSL2 is usually much better since it is in fact just a VM in disguise).
And yes, "works for me", because, yes, it works for me on a *real* Linux
machine, and that's what Buildroot is made to run on:
https://buildroot.org/manual.html#requirement
Quoting: "Buildroot is designed to run on Linux systems."
If it works on other systems, all the better. If it does not and you can
come with a non-invasive fix, good, please send it. Otherwise, meh.
--
You are receiving this mail because:
You are on the CC list for the bug.
^ permalink raw reply [flat|nested] 17+ messages in thread
* [Buildroot] [Bug 13146] raspberrypi3_defconfig: "Inappropriate ioctl for device" almost at end when sdcard.img is created
2020-08-10 19:08 [Buildroot] [Bug 13146] New: raspberrypi3_defconfig: "Inappropriate ioctl for device" almost at end when sdcard.img is created bugzilla at busybox.net
` (11 preceding siblings ...)
2020-08-11 20:10 ` bugzilla at busybox.net
@ 2020-08-11 20:14 ` bugzilla at busybox.net
2020-08-12 15:38 ` bugzilla at busybox.net
` (2 subsequent siblings)
15 siblings, 0 replies; 17+ messages in thread
From: bugzilla at busybox.net @ 2020-08-11 20:14 UTC (permalink / raw)
To: buildroot
https://bugs.busybox.net/show_bug.cgi?id=13146
--- Comment #13 from Yann E. MORIN <yann.morin.1998@free.fr> ---
(In reply to Marie Maurer from comment #7)
> I compiled in WSL (Ubuntu 20.04 LTS) under Windows 10.
Please my reply in #12.
> I don't know WSL version. How to get it?
I have absolutely no idea, I have not used Windows for the
past 18 years or so... But fortunately:
https://lmgtfy.com/?q=how+can+I+know+the+version+of+WSL+I+use+%3F&s=d
Regards.
--
You are receiving this mail because:
You are on the CC list for the bug.
^ permalink raw reply [flat|nested] 17+ messages in thread
* [Buildroot] [Bug 13146] raspberrypi3_defconfig: "Inappropriate ioctl for device" almost at end when sdcard.img is created
2020-08-10 19:08 [Buildroot] [Bug 13146] New: raspberrypi3_defconfig: "Inappropriate ioctl for device" almost at end when sdcard.img is created bugzilla at busybox.net
` (12 preceding siblings ...)
2020-08-11 20:14 ` bugzilla at busybox.net
@ 2020-08-12 15:38 ` bugzilla at busybox.net
2020-08-12 19:23 ` bugzilla at busybox.net
2020-08-12 19:40 ` bugzilla at busybox.net
15 siblings, 0 replies; 17+ messages in thread
From: bugzilla at busybox.net @ 2020-08-12 15:38 UTC (permalink / raw)
To: buildroot
https://bugs.busybox.net/show_bug.cgi?id=13146
--- Comment #14 from Marie Maurer <marie.maurer@mmeacs.de> ---
This is the info I got under Linux:
marie at 2020L009:~$ uname -a
Linux 2020L009 4.4.0-19041-Microsoft #1-Microsoft Fri Dec 06 14:06:00 PST 2019
x86_64 x86_64 x86_64 GNU/Linux
This is the info I got under Windows (partly Powershell):
PS C:\WINDOWS\system32> wsl -l -v
NAME STATE VERSION
* Ubuntu Stopped 1
PS C:\WINDOWS\system32>
C:\tmp>ver
Microsoft Windows [Version 10.0.19041.450]
C:\tmp>systeminfo.exe
Betriebssystemversion: 10.0.19041 Nicht zutreffend Build 19041
=> I assume it is WSL 1
--
You are receiving this mail because:
You are on the CC list for the bug.
^ permalink raw reply [flat|nested] 17+ messages in thread
* [Buildroot] [Bug 13146] raspberrypi3_defconfig: "Inappropriate ioctl for device" almost at end when sdcard.img is created
2020-08-10 19:08 [Buildroot] [Bug 13146] New: raspberrypi3_defconfig: "Inappropriate ioctl for device" almost at end when sdcard.img is created bugzilla at busybox.net
` (13 preceding siblings ...)
2020-08-12 15:38 ` bugzilla at busybox.net
@ 2020-08-12 19:23 ` bugzilla at busybox.net
2020-08-12 19:40 ` bugzilla at busybox.net
15 siblings, 0 replies; 17+ messages in thread
From: bugzilla at busybox.net @ 2020-08-12 19:23 UTC (permalink / raw)
To: buildroot
https://bugs.busybox.net/show_bug.cgi?id=13146
--- Comment #15 from Peter Seiderer <ps.report@gmx.net> ---
Fix/workaround posted upstream, see [1].
[1] https://github.com/pengutronix/genimage/pull/116
--
You are receiving this mail because:
You are on the CC list for the bug.
^ permalink raw reply [flat|nested] 17+ messages in thread
* [Buildroot] [Bug 13146] raspberrypi3_defconfig: "Inappropriate ioctl for device" almost at end when sdcard.img is created
2020-08-10 19:08 [Buildroot] [Bug 13146] New: raspberrypi3_defconfig: "Inappropriate ioctl for device" almost at end when sdcard.img is created bugzilla at busybox.net
` (14 preceding siblings ...)
2020-08-12 19:23 ` bugzilla at busybox.net
@ 2020-08-12 19:40 ` bugzilla at busybox.net
15 siblings, 0 replies; 17+ messages in thread
From: bugzilla at busybox.net @ 2020-08-12 19:40 UTC (permalink / raw)
To: buildroot
https://bugs.busybox.net/show_bug.cgi?id=13146
--- Comment #16 from Marie Maurer <marie.maurer@mmeacs.de> ---
Many thanks!
--
You are receiving this mail because:
You are on the CC list for the bug.
^ permalink raw reply [flat|nested] 17+ messages in thread
end of thread, other threads:[~2020-08-12 19:40 UTC | newest]
Thread overview: 17+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-08-10 19:08 [Buildroot] [Bug 13146] New: raspberrypi3_defconfig: "Inappropriate ioctl for device" almost at end when sdcard.img is created bugzilla at busybox.net
2020-08-10 21:24 ` [Buildroot] [Bug 13146] " bugzilla at busybox.net
2020-08-11 6:59 ` bugzilla at busybox.net
2020-08-11 7:24 ` bugzilla at busybox.net
2020-08-11 7:26 ` bugzilla at busybox.net
2020-08-11 7:38 ` bugzilla at busybox.net
2020-08-11 15:47 ` bugzilla at busybox.net
2020-08-11 16:58 ` bugzilla at busybox.net
2020-08-11 17:00 ` bugzilla at busybox.net
2020-08-11 19:27 ` bugzilla at busybox.net
2020-08-11 19:31 ` bugzilla at busybox.net
2020-08-11 19:33 ` bugzilla at busybox.net
2020-08-11 20:10 ` bugzilla at busybox.net
2020-08-11 20:14 ` bugzilla at busybox.net
2020-08-12 15:38 ` bugzilla at busybox.net
2020-08-12 19:23 ` bugzilla at busybox.net
2020-08-12 19:40 ` bugzilla at busybox.net
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.