[PATCH v5] brcmfmac cleanup

[PATCH v5] brcmfmac cleanup

[Ian Molton]

Hi folks,

Arend, as requested - a respin to take account of your comments.

Unfortunately, although I've only included the patches you requested from v4,
breaking out some of the simpler changes (whitespace, macos, etc.) has grown
the set back up to 30 patches. I hope this is OK.

I've tried to include everything you asked for but may not have understood
everything you wrote, so please bear with me :) Im happy to keep at this until
it's right.

I did have to include a couple of patches from v4 that you didnt request,
because they were dependencies of ones you wanted. I've kept this as minimal
as possible, however.

The whole patchset was compile tested at each commit on 4.13-rc5.

No functional changes from v4 (other than this is a subset of the v4 series).

-Ian

[PATCH 01/30] brcmfmac: Fix parameter order in brcmf_sdiod_f0_writeb()

[Ian Molton]

	All the other IO functions are the other way round in this
driver. Make this one match.

Signed-off-by: Ian Molton <ian@mnementh.co.uk>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
index 984c1d0560b1..f585dfd89453 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
@@ -230,8 +230,8 @@ void brcmf_sdiod_change_state(struct brcmf_sdio_dev *sdiodev,
 	sdiodev->state = state;
 }
 
-static inline int brcmf_sdiod_f0_writeb(struct sdio_func *func,
-					uint regaddr, u8 byte)
+static inline int brcmf_sdiod_f0_writeb(struct sdio_func *func, u8 byte,
+					uint regaddr)
 {
 	int err_ret;
 
@@ -269,8 +269,8 @@ static int brcmf_sdiod_request_data(struct brcmf_sdio_dev *sdiodev, u8 fn,
 			if (fn)
 				sdio_writeb(func, *(u8 *)data, addr, &ret);
 			else
-				ret = brcmf_sdiod_f0_writeb(func, addr,
-							    *(u8 *)data);
+				ret = brcmf_sdiod_f0_writeb(func, *(u8 *)data,
+							    addr);
 		} else {
 			if (fn)
 				*(u8 *)data = sdio_readb(func, addr, &ret);
-- 
2.11.0

[PATCH 02/30] brcmfmac: Register sizes on hardware are not dependent on compiler types

[Ian Molton]

The 4 IO functions in this patch are incorrect as they use compiler types
to determine how many bytes to send to the hardware.

Signed-off-by: Ian Molton <ian@mnementh.co.uk>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
---
 .../wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c  | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
index f585dfd89453..2b441ce91d5f 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
@@ -264,7 +264,7 @@ static int brcmf_sdiod_request_data(struct brcmf_sdio_dev *sdiodev, u8 fn,
 	func = sdiodev->func[fn];
 
 	switch (regsz) {
-	case sizeof(u8):
+	case 1:
 		if (write) {
 			if (fn)
 				sdio_writeb(func, *(u8 *)data, addr, &ret);
@@ -278,13 +278,13 @@ static int brcmf_sdiod_request_data(struct brcmf_sdio_dev *sdiodev, u8 fn,
 				*(u8 *)data = sdio_f0_readb(func, addr, &ret);
 		}
 		break;
-	case sizeof(u16):
+	case 2:
 		if (write)
 			sdio_writew(func, *(u16 *)data, addr, &ret);
 		else
 			*(u16 *)data = sdio_readw(func, addr, &ret);
 		break;
-	case sizeof(u32):
+	case 4:
 		if (write)
 			sdio_writel(func, *(u32 *)data, addr, &ret);
 		else
@@ -368,7 +368,7 @@ brcmf_sdiod_set_sbaddr_window(struct brcmf_sdio_dev *sdiodev, u32 address)
 	for (i = 0; i < 3; i++) {
 		err = brcmf_sdiod_regrw_helper(sdiodev,
 					       SBSDIO_FUNC1_SBADDRLOW + i,
-					       sizeof(u8), &addr[i], true);
+					       1, &addr[i], true);
 		if (err) {
 			brcmf_err("failed at addr: 0x%0x\n",
 				  SBSDIO_FUNC1_SBADDRLOW + i);
@@ -407,7 +407,7 @@ u8 brcmf_sdiod_regrb(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret)
 	int retval;
 
 	brcmf_dbg(SDIO, "addr:0x%08x\n", addr);
-	retval = brcmf_sdiod_regrw_helper(sdiodev, addr, sizeof(data), &data,
+	retval = brcmf_sdiod_regrw_helper(sdiodev, addr, 1, &data,
 					  false);
 	brcmf_dbg(SDIO, "data:0x%02x\n", data);
 
@@ -423,10 +423,10 @@ u32 brcmf_sdiod_regrl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret)
 	int retval;
 
 	brcmf_dbg(SDIO, "addr:0x%08x\n", addr);
-	retval = brcmf_sdiod_addrprep(sdiodev, sizeof(data), &addr);
+	retval = brcmf_sdiod_addrprep(sdiodev, 4, &addr);
 	if (retval)
 		goto done;
-	retval = brcmf_sdiod_regrw_helper(sdiodev, addr, sizeof(data), &data,
+	retval = brcmf_sdiod_regrw_helper(sdiodev, addr, 4, &data,
 					  false);
 	brcmf_dbg(SDIO, "data:0x%08x\n", data);
 
@@ -443,7 +443,7 @@ void brcmf_sdiod_regwb(struct brcmf_sdio_dev *sdiodev, u32 addr,
 	int retval;
 
 	brcmf_dbg(SDIO, "addr:0x%08x, data:0x%02x\n", addr, data);
-	retval = brcmf_sdiod_regrw_helper(sdiodev, addr, sizeof(data), &data,
+	retval = brcmf_sdiod_regrw_helper(sdiodev, addr, 1, &data,
 					  true);
 	if (ret)
 		*ret = retval;
@@ -455,10 +455,10 @@ void brcmf_sdiod_regwl(struct brcmf_sdio_dev *sdiodev, u32 addr,
 	int retval;
 
 	brcmf_dbg(SDIO, "addr:0x%08x, data:0x%08x\n", addr, data);
-	retval = brcmf_sdiod_addrprep(sdiodev, sizeof(data), &addr);
+	retval = brcmf_sdiod_addrprep(sdiodev, 4, &addr);
 	if (retval)
 		goto done;
-	retval = brcmf_sdiod_regrw_helper(sdiodev, addr, sizeof(data), &data,
+	retval = brcmf_sdiod_regrw_helper(sdiodev, addr, 4, &data,
 					  true);
 
 done:
@@ -876,7 +876,7 @@ int brcmf_sdiod_abort(struct brcmf_sdio_dev *sdiodev, uint fn)
 
 	/* issue abort cmd52 command through F0 */
 	brcmf_sdiod_request_data(sdiodev, SDIO_FUNC_0, SDIO_CCCR_ABORT,
-				 sizeof(t_func), &t_func, true);
+				 1, &t_func, true);
 
 	brcmf_dbg(SDIO, "Exit\n");
 	return 0;
-- 
2.11.0

[PATCH 03/30] brcmfmac: Split brcmf_sdiod_regrw_helper() up.

[Ian Molton]

	This large function is concealing a LOT of obscure logic about
how the hardware functions. Time to split it up.

This first patch splits the function into two pieces - read and write,
doing away with the rw flag in the process.

Signed-off-by: Ian Molton <ian@mnementh.co.uk>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
---
 .../wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c  | 94 +++++++++++++++++-----
 1 file changed, 73 insertions(+), 21 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
index 2b441ce91d5f..1ee0f91b6c50 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
@@ -302,8 +302,8 @@ static int brcmf_sdiod_request_data(struct brcmf_sdio_dev *sdiodev, u8 fn,
 	return ret;
 }
 
-static int brcmf_sdiod_regrw_helper(struct brcmf_sdio_dev *sdiodev, u32 addr,
-				   u8 regsz, void *data, bool write)
+static int brcmf_sdiod_reg_write(struct brcmf_sdio_dev *sdiodev, u32 addr,
+				 u8 regsz, void *data)
 {
 	u8 func;
 	s32 retry = 0;
@@ -324,13 +324,66 @@ static int brcmf_sdiod_regrw_helper(struct brcmf_sdio_dev *sdiodev, u32 addr,
 		func = SDIO_FUNC_1;
 
 	do {
-		if (!write)
-			memset(data, 0, regsz);
 		/* for retry wait for 1 ms till bus get settled down */
 		if (retry)
 			usleep_range(1000, 2000);
+
+		ret = brcmf_sdiod_request_data(sdiodev, func, addr, regsz,
+					       data, true);
+
+	} while (ret != 0 && ret != -ENOMEDIUM &&
+		 retry++ < SDIOH_API_ACCESS_RETRY_LIMIT);
+
+	if (ret == -ENOMEDIUM) {
+		brcmf_sdiod_change_state(sdiodev, BRCMF_SDIOD_NOMEDIUM);
+	} else if (ret != 0) {
+		/*
+		 * SleepCSR register access can fail when
+		 * waking up the device so reduce this noise
+		 * in the logs.
+		 */
+		if (addr != SBSDIO_FUNC1_SLEEPCSR)
+			brcmf_err("failed to write data F%d@0x%05x, err: %d\n",
+				  func, addr, ret);
+		else
+			brcmf_dbg(SDIO, "failed to write data F%d@0x%05x, err: %d\n",
+				  func, addr, ret);
+	}
+
+	return ret;
+}
+
+static int brcmf_sdiod_reg_read(struct brcmf_sdio_dev *sdiodev, u32 addr,
+				u8 regsz, void *data)
+{
+	u8 func;
+	s32 retry = 0;
+	int ret;
+
+	if (sdiodev->state == BRCMF_SDIOD_NOMEDIUM)
+		return -ENOMEDIUM;
+
+	/*
+	 * figure out how to read the register based on address range
+	 * 0x00 ~ 0x7FF: function 0 CCCR and FBR
+	 * 0x10000 ~ 0x1FFFF: function 1 miscellaneous registers
+	 * The rest: function 1 silicon backplane core registers
+	 */
+	if ((addr & ~REG_F0_REG_MASK) == 0)
+		func = SDIO_FUNC_0;
+	else
+		func = SDIO_FUNC_1;
+
+	do {
+		memset(data, 0, regsz);
+
+		/* for retry wait for 1 ms till bus get settled down */
+		if (retry)
+			usleep_range(1000, 2000);
+
 		ret = brcmf_sdiod_request_data(sdiodev, func, addr, regsz,
-					       data, write);
+					       data, false);
+
 	} while (ret != 0 && ret != -ENOMEDIUM &&
 		 retry++ < SDIOH_API_ACCESS_RETRY_LIMIT);
 
@@ -343,12 +396,13 @@ static int brcmf_sdiod_regrw_helper(struct brcmf_sdio_dev *sdiodev, u32 addr,
 		 * in the logs.
 		 */
 		if (addr != SBSDIO_FUNC1_SLEEPCSR)
-			brcmf_err("failed to %s data F%d@0x%05x, err: %d\n",
-				  write ? "write" : "read", func, addr, ret);
+			brcmf_err("failed to read data F%d@0x%05x, err: %d\n",
+				  func, addr, ret);
 		else
-			brcmf_dbg(SDIO, "failed to %s data F%d@0x%05x, err: %d\n",
-				  write ? "write" : "read", func, addr, ret);
+			brcmf_dbg(SDIO, "failed to read data F%d@0x%05x, err: %d\n",
+				  func, addr, ret);
 	}
+
 	return ret;
 }
 
@@ -366,13 +420,11 @@ brcmf_sdiod_set_sbaddr_window(struct brcmf_sdio_dev *sdiodev, u32 address)
 	addr[2] = (address >> 24) & SBSDIO_SBADDRHIGH_MASK;
 
 	for (i = 0; i < 3; i++) {
-		err = brcmf_sdiod_regrw_helper(sdiodev,
-					       SBSDIO_FUNC1_SBADDRLOW + i,
-					       1, &addr[i], true);
+		brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_SBADDRLOW + i, addr[i],
+				  &err);
 		if (err) {
 			brcmf_err("failed at addr: 0x%0x\n",
 				  SBSDIO_FUNC1_SBADDRLOW + i);
-			break;
 		}
 	}
 
@@ -407,8 +459,7 @@ u8 brcmf_sdiod_regrb(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret)
 	int retval;
 
 	brcmf_dbg(SDIO, "addr:0x%08x\n", addr);
-	retval = brcmf_sdiod_regrw_helper(sdiodev, addr, 1, &data,
-					  false);
+	retval = brcmf_sdiod_reg_read(sdiodev, addr, 1, &data);
 	brcmf_dbg(SDIO, "data:0x%02x\n", data);
 
 	if (ret)
@@ -426,8 +477,9 @@ u32 brcmf_sdiod_regrl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret)
 	retval = brcmf_sdiod_addrprep(sdiodev, 4, &addr);
 	if (retval)
 		goto done;
-	retval = brcmf_sdiod_regrw_helper(sdiodev, addr, 4, &data,
-					  false);
+
+	retval = brcmf_sdiod_reg_read(sdiodev, addr, 4, &data);
+
 	brcmf_dbg(SDIO, "data:0x%08x\n", data);
 
 done:
@@ -443,8 +495,8 @@ void brcmf_sdiod_regwb(struct brcmf_sdio_dev *sdiodev, u32 addr,
 	int retval;
 
 	brcmf_dbg(SDIO, "addr:0x%08x, data:0x%02x\n", addr, data);
-	retval = brcmf_sdiod_regrw_helper(sdiodev, addr, 1, &data,
-					  true);
+	retval = brcmf_sdiod_reg_write(sdiodev, addr, 1, &data);
+
 	if (ret)
 		*ret = retval;
 }
@@ -458,8 +510,8 @@ void brcmf_sdiod_regwl(struct brcmf_sdio_dev *sdiodev, u32 addr,
 	retval = brcmf_sdiod_addrprep(sdiodev, 4, &addr);
 	if (retval)
 		goto done;
-	retval = brcmf_sdiod_regrw_helper(sdiodev, addr, 4, &data,
-					  true);
+
+	retval = brcmf_sdiod_reg_write(sdiodev, addr, 4, &data);
 
 done:
 	if (ret)
-- 
2.11.0

[PATCH 04/30] brcmfmac: Clean up brcmf_sdiod_set_sbaddr_window()

[Ian Molton]

	This function sets the address of the IO window used for
SDIO accesses onto the backplane of the chip.

It currently uses 3 separate masks despite the full mask being
defined in the code already. Remove the separate masks and clean up.

Signed-off-by: Ian Molton <ian@mnementh.co.uk>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
---
 .../net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c   | 17 +++++------------
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h |  3 ---
 2 files changed, 5 insertions(+), 15 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
index 1ee0f91b6c50..7b2184d1e365 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
@@ -410,23 +410,16 @@ static int
 brcmf_sdiod_set_sbaddr_window(struct brcmf_sdio_dev *sdiodev, u32 address)
 {
 	int err = 0, i;
-	u8 addr[3];
+	u32 addr;
 
 	if (sdiodev->state == BRCMF_SDIOD_NOMEDIUM)
 		return -ENOMEDIUM;
 
-	addr[0] = (address >> 8) & SBSDIO_SBADDRLOW_MASK;
-	addr[1] = (address >> 16) & SBSDIO_SBADDRMID_MASK;
-	addr[2] = (address >> 24) & SBSDIO_SBADDRHIGH_MASK;
+	addr = (address & SBSDIO_SBWINDOW_MASK) >> 8;
 
-	for (i = 0; i < 3; i++) {
-		brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_SBADDRLOW + i, addr[i],
-				  &err);
-		if (err) {
-			brcmf_err("failed at addr: 0x%0x\n",
-				  SBSDIO_FUNC1_SBADDRLOW + i);
-		}
-	}
+	for (i = 0 ; i < 3 && !err ; i++, addr >>= 8)
+		brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_SBADDRLOW + i,
+				  addr & 0xff, &err);
 
 	return err;
 }
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
index f3da32fc6360..e3b78db331b5 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
@@ -133,9 +133,6 @@
 
 /* valid bits in SBSDIO_FUNC1_SBADDRxxx regs */
 
-#define SBSDIO_SBADDRLOW_MASK		0x80	/* Valid bits in SBADDRLOW */
-#define SBSDIO_SBADDRMID_MASK		0xff	/* Valid bits in SBADDRMID */
-#define SBSDIO_SBADDRHIGH_MASK		0xffU	/* Valid bits in SBADDRHIGH */
 /* Address bits from SBADDR regs */
 #define SBSDIO_SBWINDOW_MASK		0xffff8000
 
-- 
2.11.0

[PATCH 05/30] brcmfmac: Remove dead IO code

[Ian Molton]

	The value passed to brcmf_sdiod_addrprep() is *always* 4
remove this parameter and the unused code to handle it.

Signed-off-by: Ian Molton <ian@mnementh.co.uk>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
---
 .../net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c  | 18 ++++++++----------
 1 file changed, 8 insertions(+), 10 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
index 7b2184d1e365..609a934c1658 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
@@ -425,7 +425,7 @@ brcmf_sdiod_set_sbaddr_window(struct brcmf_sdio_dev *sdiodev, u32 address)
 }
 
 static int
-brcmf_sdiod_addrprep(struct brcmf_sdio_dev *sdiodev, uint width, u32 *addr)
+brcmf_sdiod_addrprep(struct brcmf_sdio_dev *sdiodev, u32 *addr)
 {
 	uint bar0 = *addr & ~SBSDIO_SB_OFT_ADDR_MASK;
 	int err = 0;
@@ -439,9 +439,7 @@ brcmf_sdiod_addrprep(struct brcmf_sdio_dev *sdiodev, uint width, u32 *addr)
 	}
 
 	*addr &= SBSDIO_SB_OFT_ADDR_MASK;
-
-	if (width == 4)
-		*addr |= SBSDIO_SB_ACCESS_2_4B_FLAG;
+	*addr |= SBSDIO_SB_ACCESS_2_4B_FLAG;
 
 	return 0;
 }
@@ -467,7 +465,7 @@ u32 brcmf_sdiod_regrl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret)
 	int retval;
 
 	brcmf_dbg(SDIO, "addr:0x%08x\n", addr);
-	retval = brcmf_sdiod_addrprep(sdiodev, 4, &addr);
+	retval = brcmf_sdiod_addrprep(sdiodev, &addr);
 	if (retval)
 		goto done;
 
@@ -500,7 +498,7 @@ void brcmf_sdiod_regwl(struct brcmf_sdio_dev *sdiodev, u32 addr,
 	int retval;
 
 	brcmf_dbg(SDIO, "addr:0x%08x, data:0x%08x\n", addr, data);
-	retval = brcmf_sdiod_addrprep(sdiodev, 4, &addr);
+	retval = brcmf_sdiod_addrprep(sdiodev, &addr);
 	if (retval)
 		goto done;
 
@@ -736,7 +734,7 @@ int brcmf_sdiod_recv_pkt(struct brcmf_sdio_dev *sdiodev, struct sk_buff *pkt)
 
 	brcmf_dbg(SDIO, "addr = 0x%x, size = %d\n", addr, pkt->len);
 
-	err = brcmf_sdiod_addrprep(sdiodev, 4, &addr);
+	err = brcmf_sdiod_addrprep(sdiodev, &addr);
 	if (err)
 		goto done;
 
@@ -757,7 +755,7 @@ int brcmf_sdiod_recv_chain(struct brcmf_sdio_dev *sdiodev,
 	brcmf_dbg(SDIO, "addr = 0x%x, size = %d\n",
 		  addr, pktq->qlen);
 
-	err = brcmf_sdiod_addrprep(sdiodev, 4, &addr);
+	err = brcmf_sdiod_addrprep(sdiodev, &addr);
 	if (err)
 		goto done;
 
@@ -801,7 +799,7 @@ int brcmf_sdiod_send_buf(struct brcmf_sdio_dev *sdiodev, u8 *buf, uint nbytes)
 
 	memcpy(mypkt->data, buf, nbytes);
 
-	err = brcmf_sdiod_addrprep(sdiodev, 4, &addr);
+	err = brcmf_sdiod_addrprep(sdiodev, &addr);
 
 	if (!err)
 		err = brcmf_sdiod_buffrw(sdiodev, SDIO_FUNC_2, true, addr,
@@ -821,7 +819,7 @@ int brcmf_sdiod_send_pkt(struct brcmf_sdio_dev *sdiodev,
 
 	brcmf_dbg(SDIO, "addr = 0x%x, size = %d\n", addr, pktq->qlen);
 
-	err = brcmf_sdiod_addrprep(sdiodev, 4, &addr);
+	err = brcmf_sdiod_addrprep(sdiodev, &addr);
 	if (err)
 		return err;
 
-- 
2.11.0

[PATCH 06/30] brcmfmac: Remove bandaid for SleepCSR

[Ian Molton]

Register access code is not the place for band-aid fixes like this.
If this is a genuine problem, it should be fixed further up in the driver
stack.

Signed-off-by: Ian Molton <ian@mnementh.co.uk>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
---
 .../wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c  | 28 +---------------------
 1 file changed, 1 insertion(+), 27 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
index 609a934c1658..d217b1281e0d 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
@@ -334,21 +334,8 @@ static int brcmf_sdiod_reg_write(struct brcmf_sdio_dev *sdiodev, u32 addr,
 	} while (ret != 0 && ret != -ENOMEDIUM &&
 		 retry++ < SDIOH_API_ACCESS_RETRY_LIMIT);
 
-	if (ret == -ENOMEDIUM) {
+	if (ret == -ENOMEDIUM)
 		brcmf_sdiod_change_state(sdiodev, BRCMF_SDIOD_NOMEDIUM);
-	} else if (ret != 0) {
-		/*
-		 * SleepCSR register access can fail when
-		 * waking up the device so reduce this noise
-		 * in the logs.
-		 */
-		if (addr != SBSDIO_FUNC1_SLEEPCSR)
-			brcmf_err("failed to write data F%d@0x%05x, err: %d\n",
-				  func, addr, ret);
-		else
-			brcmf_dbg(SDIO, "failed to write data F%d@0x%05x, err: %d\n",
-				  func, addr, ret);
-	}
 
 	return ret;
 }
@@ -389,19 +376,6 @@ static int brcmf_sdiod_reg_read(struct brcmf_sdio_dev *sdiodev, u32 addr,
 
 	if (ret == -ENOMEDIUM)
 		brcmf_sdiod_change_state(sdiodev, BRCMF_SDIOD_NOMEDIUM);
-	else if (ret != 0) {
-		/*
-		 * SleepCSR register access can fail when
-		 * waking up the device so reduce this noise
-		 * in the logs.
-		 */
-		if (addr != SBSDIO_FUNC1_SLEEPCSR)
-			brcmf_err("failed to read data F%d@0x%05x, err: %d\n",
-				  func, addr, ret);
-		else
-			brcmf_dbg(SDIO, "failed to read data F%d@0x%05x, err: %d\n",
-				  func, addr, ret);
-	}
 
 	return ret;
 }
-- 
2.11.0

[PATCH 07/30] brcmfmac: Remove brcmf_sdiod_request_data()

[Ian Molton]

This function is obfuscating how IO works on this chip. Remove it
and push its logic into brcmf_sdiod_reg_{read,write}().

Handling of -ENOMEDIUM is altered, but as that's pretty much broken anyway
we can ignore that.

Signed-off-by: Ian Molton <ian@mnementh.co.uk>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
---
 .../wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c  | 236 ++++++++-------------
 .../wireless/broadcom/brcm80211/brcmfmac/sdio.h    |   2 +-
 2 files changed, 86 insertions(+), 152 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
index d217b1281e0d..6659c614a17f 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
@@ -230,6 +230,43 @@ void brcmf_sdiod_change_state(struct brcmf_sdio_dev *sdiodev,
 	sdiodev->state = state;
 }
 
+static int brcmf_sdiod_set_sbaddr_window(struct brcmf_sdio_dev *sdiodev,
+					 u32 address)
+{
+	int err = 0, i;
+	u32 addr;
+
+	if (sdiodev->state == BRCMF_SDIOD_NOMEDIUM)
+		return -ENOMEDIUM;
+
+	addr = (address & SBSDIO_SBWINDOW_MASK) >> 8;
+
+	for (i = 0 ; i < 3 && !err ; i++, addr >>= 8)
+		brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_SBADDRLOW + i,
+				  addr & 0xff, &err);
+
+	return err;
+}
+
+static int brcmf_sdiod_addrprep(struct brcmf_sdio_dev *sdiodev, u32 *addr)
+{
+	uint bar0 = *addr & ~SBSDIO_SB_OFT_ADDR_MASK;
+	int err = 0;
+
+	if (bar0 != sdiodev->sbwad) {
+		err = brcmf_sdiod_set_sbaddr_window(sdiodev, bar0);
+		if (err)
+			return err;
+
+		sdiodev->sbwad = bar0;
+	}
+
+	*addr &= SBSDIO_SB_OFT_ADDR_MASK;
+	*addr |= SBSDIO_SB_ACCESS_2_4B_FLAG;
+
+	return 0;
+}
+
 static inline int brcmf_sdiod_f0_writeb(struct sdio_func *func, u8 byte,
 					uint regaddr)
 {
@@ -249,173 +286,83 @@ static inline int brcmf_sdiod_f0_writeb(struct sdio_func *func, u8 byte,
 	return err_ret;
 }
 
-static int brcmf_sdiod_request_data(struct brcmf_sdio_dev *sdiodev, u8 fn,
-				    u32 addr, u8 regsz, void *data, bool write)
-{
-	struct sdio_func *func;
-	int ret = -EINVAL;
-
-	brcmf_dbg(SDIO, "rw=%d, func=%d, addr=0x%05x, nbytes=%d\n",
-		  write, fn, addr, regsz);
-
-	/* only allow byte access on F0 */
-	if (WARN_ON(regsz > 1 && !fn))
-		return -EINVAL;
-	func = sdiodev->func[fn];
-
-	switch (regsz) {
-	case 1:
-		if (write) {
-			if (fn)
-				sdio_writeb(func, *(u8 *)data, addr, &ret);
-			else
-				ret = brcmf_sdiod_f0_writeb(func, *(u8 *)data,
-							    addr);
-		} else {
-			if (fn)
-				*(u8 *)data = sdio_readb(func, addr, &ret);
-			else
-				*(u8 *)data = sdio_f0_readb(func, addr, &ret);
-		}
-		break;
-	case 2:
-		if (write)
-			sdio_writew(func, *(u16 *)data, addr, &ret);
-		else
-			*(u16 *)data = sdio_readw(func, addr, &ret);
-		break;
-	case 4:
-		if (write)
-			sdio_writel(func, *(u32 *)data, addr, &ret);
-		else
-			*(u32 *)data = sdio_readl(func, addr, &ret);
-		break;
-	default:
-		brcmf_err("invalid size: %d\n", regsz);
-		break;
-	}
-
-	if (ret)
-		brcmf_dbg(SDIO, "failed to %s data F%d@0x%05x, err: %d\n",
-			  write ? "write" : "read", fn, addr, ret);
-
-	return ret;
-}
-
 static int brcmf_sdiod_reg_write(struct brcmf_sdio_dev *sdiodev, u32 addr,
 				 u8 regsz, void *data)
 {
-	u8 func;
-	s32 retry = 0;
 	int ret;
 
-	if (sdiodev->state == BRCMF_SDIOD_NOMEDIUM)
-		return -ENOMEDIUM;
-
 	/*
 	 * figure out how to read the register based on address range
 	 * 0x00 ~ 0x7FF: function 0 CCCR and FBR
 	 * 0x10000 ~ 0x1FFFF: function 1 miscellaneous registers
 	 * The rest: function 1 silicon backplane core registers
+	 * f0 writes must be bytewise
 	 */
-	if ((addr & ~REG_F0_REG_MASK) == 0)
-		func = SDIO_FUNC_0;
-	else
-		func = SDIO_FUNC_1;
 
-	do {
-		/* for retry wait for 1 ms till bus get settled down */
-		if (retry)
-			usleep_range(1000, 2000);
-
-		ret = brcmf_sdiod_request_data(sdiodev, func, addr, regsz,
-					       data, true);
-
-	} while (ret != 0 && ret != -ENOMEDIUM &&
-		 retry++ < SDIOH_API_ACCESS_RETRY_LIMIT);
+	if ((addr & ~REG_F0_REG_MASK) == 0) {
+		if (WARN_ON(regsz > 1))
+			return -EINVAL;
+		ret = brcmf_sdiod_f0_writeb(sdiodev->func[0], *(u8 *)data, addr);
+	} else {
+		switch (regsz) {
+		case 1:
+			sdio_writeb(sdiodev->func[1], *(u8 *)data, addr, &ret);
+			break;
+		case 4:
+			ret = brcmf_sdiod_addrprep(sdiodev, &addr);
+			if (ret)
+				goto done;
 
-	if (ret == -ENOMEDIUM)
-		brcmf_sdiod_change_state(sdiodev, BRCMF_SDIOD_NOMEDIUM);
+			sdio_writel(sdiodev->func[1], *(u32 *)data, addr, &ret);
+			break;
+		default:
+			WARN(1, "Invalid reg size\n");
+			ret = -EINVAL;
+			break;
+		}
+	}
 
+done:
 	return ret;
 }
 
 static int brcmf_sdiod_reg_read(struct brcmf_sdio_dev *sdiodev, u32 addr,
 				u8 regsz, void *data)
 {
-	u8 func;
-	s32 retry = 0;
 	int ret;
 
-	if (sdiodev->state == BRCMF_SDIOD_NOMEDIUM)
-		return -ENOMEDIUM;
-
 	/*
 	 * figure out how to read the register based on address range
 	 * 0x00 ~ 0x7FF: function 0 CCCR and FBR
 	 * 0x10000 ~ 0x1FFFF: function 1 miscellaneous registers
 	 * The rest: function 1 silicon backplane core registers
+	 * f0 reads must be bytewise
 	 */
-	if ((addr & ~REG_F0_REG_MASK) == 0)
-		func = SDIO_FUNC_0;
-	else
-		func = SDIO_FUNC_1;
-
-	do {
-		memset(data, 0, regsz);
-
-		/* for retry wait for 1 ms till bus get settled down */
-		if (retry)
-			usleep_range(1000, 2000);
-
-		ret = brcmf_sdiod_request_data(sdiodev, func, addr, regsz,
-					       data, false);
-
-	} while (ret != 0 && ret != -ENOMEDIUM &&
-		 retry++ < SDIOH_API_ACCESS_RETRY_LIMIT);
-
-	if (ret == -ENOMEDIUM)
-		brcmf_sdiod_change_state(sdiodev, BRCMF_SDIOD_NOMEDIUM);
-
-	return ret;
-}
-
-static int
-brcmf_sdiod_set_sbaddr_window(struct brcmf_sdio_dev *sdiodev, u32 address)
-{
-	int err = 0, i;
-	u32 addr;
-
-	if (sdiodev->state == BRCMF_SDIOD_NOMEDIUM)
-		return -ENOMEDIUM;
-
-	addr = (address & SBSDIO_SBWINDOW_MASK) >> 8;
-
-	for (i = 0 ; i < 3 && !err ; i++, addr >>= 8)
-		brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_SBADDRLOW + i,
-				  addr & 0xff, &err);
-
-	return err;
-}
-
-static int
-brcmf_sdiod_addrprep(struct brcmf_sdio_dev *sdiodev, u32 *addr)
-{
-	uint bar0 = *addr & ~SBSDIO_SB_OFT_ADDR_MASK;
-	int err = 0;
-
-	if (bar0 != sdiodev->sbwad) {
-		err = brcmf_sdiod_set_sbaddr_window(sdiodev, bar0);
-		if (err)
-			return err;
+	if ((addr & ~REG_F0_REG_MASK) == 0) {
+		if (WARN_ON(regsz > 1))
+			return -EINVAL;
+		*(u8 *)data = sdio_f0_readb(sdiodev->func[0], addr, &ret);
+	} else {
+		switch (regsz) {
+		case 1:
+			*(u8 *)data = sdio_readb(sdiodev->func[1], addr, &ret);
+			break;
+		case 4:
+			ret = brcmf_sdiod_addrprep(sdiodev, &addr);
+			if (ret)
+				goto done;
 
-		sdiodev->sbwad = bar0;
+			*(u32 *)data = sdio_readl(sdiodev->func[1], addr, &ret);
+			break;
+		default:
+			WARN(1, "Invalid reg size\n");
+			ret = -EINVAL;
+			break;
+		}
 	}
 
-	*addr &= SBSDIO_SB_OFT_ADDR_MASK;
-	*addr |= SBSDIO_SB_ACCESS_2_4B_FLAG;
-
-	return 0;
+done:
+	return ret;
 }
 
 u8 brcmf_sdiod_regrb(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret)
@@ -439,15 +386,9 @@ u32 brcmf_sdiod_regrl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret)
 	int retval;
 
 	brcmf_dbg(SDIO, "addr:0x%08x\n", addr);
-	retval = brcmf_sdiod_addrprep(sdiodev, &addr);
-	if (retval)
-		goto done;
-
 	retval = brcmf_sdiod_reg_read(sdiodev, addr, 4, &data);
-
 	brcmf_dbg(SDIO, "data:0x%08x\n", data);
 
-done:
 	if (ret)
 		*ret = retval;
 
@@ -472,13 +413,8 @@ void brcmf_sdiod_regwl(struct brcmf_sdio_dev *sdiodev, u32 addr,
 	int retval;
 
 	brcmf_dbg(SDIO, "addr:0x%08x, data:0x%08x\n", addr, data);
-	retval = brcmf_sdiod_addrprep(sdiodev, &addr);
-	if (retval)
-		goto done;
-
 	retval = brcmf_sdiod_reg_write(sdiodev, addr, 4, &data);
 
-done:
 	if (ret)
 		*ret = retval;
 }
@@ -886,14 +822,12 @@ brcmf_sdiod_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address,
 	return bcmerror;
 }
 
-int brcmf_sdiod_abort(struct brcmf_sdio_dev *sdiodev, uint fn)
+int brcmf_sdiod_abort(struct brcmf_sdio_dev *sdiodev, u8 fn)
 {
-	char t_func = (char)fn;
 	brcmf_dbg(SDIO, "Enter\n");
 
 	/* issue abort cmd52 command through F0 */
-	brcmf_sdiod_request_data(sdiodev, SDIO_FUNC_0, SDIO_CCCR_ABORT,
-				 1, &t_func, true);
+	brcmf_sdiod_reg_write(sdiodev, SDIO_CCCR_ABORT, 1, &fn);
 
 	brcmf_dbg(SDIO, "Exit\n");
 	return 0;
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
index e3b78db331b5..1e4b4760159f 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
@@ -339,7 +339,7 @@ int brcmf_sdiod_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address,
 		      u8 *data, uint size);
 
 /* Issue an abort to the specified function */
-int brcmf_sdiod_abort(struct brcmf_sdio_dev *sdiodev, uint fn);
+int brcmf_sdiod_abort(struct brcmf_sdio_dev *sdiodev, u8 fn);
 void brcmf_sdiod_sgtable_alloc(struct brcmf_sdio_dev *sdiodev);
 void brcmf_sdiod_change_state(struct brcmf_sdio_dev *sdiodev,
 			      enum brcmf_sdiod_state state);
-- 
2.11.0

[PATCH 08/30] brcmfmac: Fix asymmetric IO functions.

[Ian Molton]

	Unlikely to be a problem, but brcmf_sdiod_regrb() is
not symmetric with brcmf_sdiod_regrl(). Fix.

Signed-off-by: Ian Molton <ian@mnementh.co.uk>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
index 6659c614a17f..074dc10b5ac5 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
@@ -382,7 +382,7 @@ u8 brcmf_sdiod_regrb(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret)
 
 u32 brcmf_sdiod_regrl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret)
 {
-	u32 data = 0;
+	u32 data;
 	int retval;
 
 	brcmf_dbg(SDIO, "addr:0x%08x\n", addr);
-- 
2.11.0

[PATCH 09/30] brcmfmac: Remove noisy debugging.

[Ian Molton]

If you need debugging this low level, you're doing something wrong.
Remove these noisy debug statements so the code is more readable.

Signed-off-by: Ian Molton <ian@mnementh.co.uk>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
index 074dc10b5ac5..6669e28279d9 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
@@ -370,9 +370,7 @@ u8 brcmf_sdiod_regrb(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret)
 	u8 data;
 	int retval;
 
-	brcmf_dbg(SDIO, "addr:0x%08x\n", addr);
 	retval = brcmf_sdiod_reg_read(sdiodev, addr, 1, &data);
-	brcmf_dbg(SDIO, "data:0x%02x\n", data);
 
 	if (ret)
 		*ret = retval;
@@ -385,9 +383,7 @@ u32 brcmf_sdiod_regrl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret)
 	u32 data;
 	int retval;
 
-	brcmf_dbg(SDIO, "addr:0x%08x\n", addr);
 	retval = brcmf_sdiod_reg_read(sdiodev, addr, 4, &data);
-	brcmf_dbg(SDIO, "data:0x%08x\n", data);
 
 	if (ret)
 		*ret = retval;
@@ -400,7 +396,6 @@ void brcmf_sdiod_regwb(struct brcmf_sdio_dev *sdiodev, u32 addr,
 {
 	int retval;
 
-	brcmf_dbg(SDIO, "addr:0x%08x, data:0x%02x\n", addr, data);
 	retval = brcmf_sdiod_reg_write(sdiodev, addr, 1, &data);
 
 	if (ret)
@@ -412,7 +407,6 @@ void brcmf_sdiod_regwl(struct brcmf_sdio_dev *sdiodev, u32 addr,
 {
 	int retval;
 
-	brcmf_dbg(SDIO, "addr:0x%08x, data:0x%08x\n", addr, data);
 	retval = brcmf_sdiod_reg_write(sdiodev, addr, 4, &data);
 
 	if (ret)
-- 
2.11.0

[PATCH 10/30] brcmfmac: Rename bcmerror to err

[Ian Molton]

Trivial cleanup of nasty variable name

Signed-off-by: Ian Molton <ian@mnementh.co.uk>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
index 6669e28279d9..834aa3e358ce 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
@@ -745,7 +745,7 @@ int
 brcmf_sdiod_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address,
 		  u8 *data, uint size)
 {
-	int bcmerror = 0;
+	int err = 0;
 	struct sk_buff *pkt;
 	u32 sdaddr;
 	uint dsize;
@@ -770,8 +770,8 @@ brcmf_sdiod_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address,
 	/* Do the transfer(s) */
 	while (size) {
 		/* Set the backplane window to include the start address */
-		bcmerror = brcmf_sdiod_set_sbaddr_window(sdiodev, address);
-		if (bcmerror)
+		err = brcmf_sdiod_set_sbaddr_window(sdiodev, address);
+		if (err)
 			break;
 
 		brcmf_dbg(SDIO, "%s %d bytes at offset 0x%08x in window 0x%08x\n",
@@ -784,9 +784,9 @@ brcmf_sdiod_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address,
 		skb_put(pkt, dsize);
 		if (write)
 			memcpy(pkt->data, data, dsize);
-		bcmerror = brcmf_sdiod_buffrw(sdiodev, SDIO_FUNC_1, write,
-					      sdaddr, pkt);
-		if (bcmerror) {
+		err = brcmf_sdiod_buffrw(sdiodev, SDIO_FUNC_1, write, sdaddr,
+					 pkt);
+		if (err) {
 			brcmf_err("membytes transfer failed\n");
 			break;
 		}
@@ -813,7 +813,7 @@ brcmf_sdiod_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address,
 
 	sdio_release_host(sdiodev->func[1]);
 
-	return bcmerror;
+	return err;
 }
 
 int brcmf_sdiod_abort(struct brcmf_sdio_dev *sdiodev, u8 fn)
-- 
2.11.0

[PATCH 11/30] brcmfmac: Split brcmf_sdiod_buffrw function up.

[Ian Molton]

This function needs to be split up into separate read / write variants
for clarity.

Signed-off-by: Ian Molton <ian@mnementh.co.uk>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
---
 .../wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c  | 67 +++++++++++++++-------
 1 file changed, 45 insertions(+), 22 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
index 834aa3e358ce..916f75e5e7a1 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
@@ -413,8 +413,8 @@ void brcmf_sdiod_regwl(struct brcmf_sdio_dev *sdiodev, u32 addr,
 		*ret = retval;
 }
 
-static int brcmf_sdiod_buffrw(struct brcmf_sdio_dev *sdiodev, uint fn,
-			     bool write, u32 addr, struct sk_buff *pkt)
+static int brcmf_sdiod_buff_read(struct brcmf_sdio_dev *sdiodev, uint fn,
+				 u32 addr, struct sk_buff *pkt)
 {
 	unsigned int req_sz;
 	int err;
@@ -423,18 +423,36 @@ static int brcmf_sdiod_buffrw(struct brcmf_sdio_dev *sdiodev, uint fn,
 	req_sz = pkt->len + 3;
 	req_sz &= (uint)~3;
 
-	if (write)
-		err = sdio_memcpy_toio(sdiodev->func[fn], addr,
-				       ((u8 *)(pkt->data)), req_sz);
-	else if (fn == 1)
-		err = sdio_memcpy_fromio(sdiodev->func[fn], ((u8 *)(pkt->data)),
-					 addr, req_sz);
+	if (fn == 1)
+		err = sdio_memcpy_fromio(sdiodev->func[fn],
+					 ((u8 *)(pkt->data)), addr, req_sz);
 	else
 		/* function 2 read is FIFO operation */
-		err = sdio_readsb(sdiodev->func[fn], ((u8 *)(pkt->data)), addr,
-				  req_sz);
+		err = sdio_readsb(sdiodev->func[fn],
+				  ((u8 *)(pkt->data)), addr, req_sz);
+
+	if (err == -ENOMEDIUM)
+		brcmf_sdiod_change_state(sdiodev, BRCMF_SDIOD_NOMEDIUM);
+
+	return err;
+}
+
+static int brcmf_sdiod_buff_write(struct brcmf_sdio_dev *sdiodev, uint fn,
+				  u32 addr, struct sk_buff *pkt)
+{
+	unsigned int req_sz;
+	int err;
+
+	/* Single skb use the standard mmc interface */
+	req_sz = pkt->len + 3;
+	req_sz &= (uint)~3;
+
+	err = sdio_memcpy_toio(sdiodev->func[fn], addr,
+			       ((u8 *)(pkt->data)), req_sz);
+
 	if (err == -ENOMEDIUM)
 		brcmf_sdiod_change_state(sdiodev, BRCMF_SDIOD_NOMEDIUM);
+
 	return err;
 }
 
@@ -642,7 +660,7 @@ int brcmf_sdiod_recv_pkt(struct brcmf_sdio_dev *sdiodev, struct sk_buff *pkt)
 	if (err)
 		goto done;
 
-	err = brcmf_sdiod_buffrw(sdiodev, SDIO_FUNC_2, false, addr, pkt);
+	err = brcmf_sdiod_buff_read(sdiodev, SDIO_FUNC_2, addr, pkt);
 
 done:
 	return err;
@@ -664,14 +682,14 @@ int brcmf_sdiod_recv_chain(struct brcmf_sdio_dev *sdiodev,
 		goto done;
 
 	if (pktq->qlen == 1)
-		err = brcmf_sdiod_buffrw(sdiodev, SDIO_FUNC_2, false, addr,
-					 pktq->next);
+		err = brcmf_sdiod_buff_read(sdiodev, SDIO_FUNC_2, addr,
+					    pktq->next);
 	else if (!sdiodev->sg_support) {
 		glom_skb = brcmu_pkt_buf_get_skb(totlen);
 		if (!glom_skb)
 			return -ENOMEM;
-		err = brcmf_sdiod_buffrw(sdiodev, SDIO_FUNC_2, false, addr,
-					 glom_skb);
+		err = brcmf_sdiod_buff_read(sdiodev, SDIO_FUNC_2, addr,
+					    glom_skb);
 		if (err)
 			goto done;
 
@@ -706,8 +724,7 @@ int brcmf_sdiod_send_buf(struct brcmf_sdio_dev *sdiodev, u8 *buf, uint nbytes)
 	err = brcmf_sdiod_addrprep(sdiodev, &addr);
 
 	if (!err)
-		err = brcmf_sdiod_buffrw(sdiodev, SDIO_FUNC_2, true, addr,
-					 mypkt);
+		err = brcmf_sdiod_buff_write(sdiodev, SDIO_FUNC_2, addr, mypkt);
 
 	brcmu_pkt_buf_free_skb(mypkt);
 	return err;
@@ -729,8 +746,8 @@ int brcmf_sdiod_send_pkt(struct brcmf_sdio_dev *sdiodev,
 
 	if (pktq->qlen == 1 || !sdiodev->sg_support)
 		skb_queue_walk(pktq, skb) {
-			err = brcmf_sdiod_buffrw(sdiodev, SDIO_FUNC_2, true,
-						 addr, skb);
+			err = brcmf_sdiod_buff_write(sdiodev, SDIO_FUNC_2,
+						     addr, skb);
 			if (err)
 				break;
 		}
@@ -782,10 +799,16 @@ brcmf_sdiod_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address,
 		sdaddr |= SBSDIO_SB_ACCESS_2_4B_FLAG;
 
 		skb_put(pkt, dsize);
-		if (write)
+
+		if (write) {
 			memcpy(pkt->data, data, dsize);
-		err = brcmf_sdiod_buffrw(sdiodev, SDIO_FUNC_1, write, sdaddr,
-					 pkt);
+			err = brcmf_sdiod_buff_write(sdiodev, SDIO_FUNC_1,
+						     sdaddr, pkt);
+		} else {
+			err = brcmf_sdiod_buff_read(sdiodev, SDIO_FUNC_1,
+						    sdaddr, pkt);
+		}
+
 		if (err) {
 			brcmf_err("membytes transfer failed\n");
 			break;
-- 
2.11.0

[PATCH 12/30] brcmfmac: Whitespace fixes.

[Ian Molton]

Signed-off-by: Ian Molton <ian@mnementh.co.uk>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
index 916f75e5e7a1..d5d2b2222cc1 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
@@ -713,6 +713,7 @@ int brcmf_sdiod_send_buf(struct brcmf_sdio_dev *sdiodev, u8 *buf, uint nbytes)
 	int err;
 
 	mypkt = brcmu_pkt_buf_get_skb(nbytes);
+
 	if (!mypkt) {
 		brcmf_err("brcmu_pkt_buf_get_skb failed: len %d\n",
 			  nbytes);
@@ -727,8 +728,8 @@ int brcmf_sdiod_send_buf(struct brcmf_sdio_dev *sdiodev, u8 *buf, uint nbytes)
 		err = brcmf_sdiod_buff_write(sdiodev, SDIO_FUNC_2, addr, mypkt);
 
 	brcmu_pkt_buf_free_skb(mypkt);
-	return err;
 
+	return err;
 }
 
 int brcmf_sdiod_send_pkt(struct brcmf_sdio_dev *sdiodev,
-- 
2.11.0

[PATCH 13/30] brcmfmac: Clarify if using braces.

[Ian Molton]

Whilst this if () statement is technically correct, it lacks clarity.


Signed-off-by: Ian Molton <ian@mnementh.co.uk>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
index d5d2b2222cc1..257655d7fce4 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
@@ -745,16 +745,17 @@ int brcmf_sdiod_send_pkt(struct brcmf_sdio_dev *sdiodev,
 	if (err)
 		return err;
 
-	if (pktq->qlen == 1 || !sdiodev->sg_support)
+	if (pktq->qlen == 1 || !sdiodev->sg_support) {
 		skb_queue_walk(pktq, skb) {
 			err = brcmf_sdiod_buff_write(sdiodev, SDIO_FUNC_2,
 						     addr, skb);
 			if (err)
 				break;
 		}
-	else
+	} else {
 		err = brcmf_sdiod_sglist_rw(sdiodev, SDIO_FUNC_2, true, addr,
 					    pktq);
+	}
 
 	return err;
 }
-- 
2.11.0

[PATCH 14/30] brcmfmac: Rename / replace old IO functions with simpler ones.

[Ian Molton]

Primarily this patch removes:

brcmf_sdiod_f0_writeb()
brcmf_sdiod_reg_write()
brcmf_sdiod_reg_read()

Since we no longer use the quirky method of deciding which function to
address via the address being accessed, take the opportunity to rename
some IO functions more in line with common kernel code. We also convert
those that map directly to sdio_{read,write}*() to macros.

Signed-off-by: Ian Molton <ian@mnementh.co.uk>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
---
 .../wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c  | 166 +++----------------
 .../wireless/broadcom/brcm80211/brcmfmac/sdio.c    | 182 ++++++++++-----------
 .../wireless/broadcom/brcm80211/brcmfmac/sdio.h    |  28 +++-
 3 files changed, 132 insertions(+), 244 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
index 257655d7fce4..50f207bb3dc6 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
@@ -137,27 +137,25 @@ int brcmf_sdiod_intr_register(struct brcmf_sdio_dev *sdiodev)
 		if (sdiodev->bus_if->chip == BRCM_CC_43362_CHIP_ID) {
 			/* assign GPIO to SDIO core */
 			addr = CORE_CC_REG(SI_ENUM_BASE, gpiocontrol);
-			gpiocontrol = brcmf_sdiod_regrl(sdiodev, addr, &ret);
+			gpiocontrol = brcmf_sdiod_readl(sdiodev, addr, &ret);
 			gpiocontrol |= 0x2;
-			brcmf_sdiod_regwl(sdiodev, addr, gpiocontrol, &ret);
+			brcmf_sdiod_writel(sdiodev, addr, gpiocontrol, &ret);
 
-			brcmf_sdiod_regwb(sdiodev, SBSDIO_GPIO_SELECT, 0xf,
-					  &ret);
-			brcmf_sdiod_regwb(sdiodev, SBSDIO_GPIO_OUT, 0, &ret);
-			brcmf_sdiod_regwb(sdiodev, SBSDIO_GPIO_EN, 0x2, &ret);
+			brcmf_sdiod_writeb(sdiodev, SBSDIO_GPIO_SELECT, 0xf, &ret);
+			brcmf_sdiod_writeb(sdiodev, SBSDIO_GPIO_OUT, 0, &ret);
+			brcmf_sdiod_writeb(sdiodev, SBSDIO_GPIO_EN, 0x2, &ret);
 		}
 
 		/* must configure SDIO_CCCR_IENx to enable irq */
-		data = brcmf_sdiod_regrb(sdiodev, SDIO_CCCR_IENx, &ret);
+		data = brcmf_sdiod_func0_rb(sdiodev, SDIO_CCCR_IENx, &ret);
 		data |= 1 << SDIO_FUNC_1 | 1 << SDIO_FUNC_2 | 1;
-		brcmf_sdiod_regwb(sdiodev, SDIO_CCCR_IENx, data, &ret);
+		brcmf_sdiod_func0_wb(sdiodev, SDIO_CCCR_IENx, data, &ret);
 
 		/* redirect, configure and enable io for interrupt signal */
 		data = SDIO_SEPINT_MASK | SDIO_SEPINT_OE;
 		if (pdata->oob_irq_flags & IRQF_TRIGGER_HIGH)
 			data |= SDIO_SEPINT_ACT_HI;
-		brcmf_sdiod_regwb(sdiodev, SDIO_CCCR_BRCM_SEPINT, data, &ret);
-
+		brcmf_sdiod_func0_wb(sdiodev, SDIO_CCCR_BRCM_SEPINT, data, &ret);
 		sdio_release_host(sdiodev->func[1]);
 	} else {
 		brcmf_dbg(SDIO, "Entering\n");
@@ -183,8 +181,8 @@ void brcmf_sdiod_intr_unregister(struct brcmf_sdio_dev *sdiodev)
 
 		pdata = &sdiodev->settings->bus.sdio;
 		sdio_claim_host(sdiodev->func[1]);
-		brcmf_sdiod_regwb(sdiodev, SDIO_CCCR_BRCM_SEPINT, 0, NULL);
-		brcmf_sdiod_regwb(sdiodev, SDIO_CCCR_IENx, 0, NULL);
+		brcmf_sdiod_func0_wb(sdiodev, SDIO_CCCR_BRCM_SEPINT, 0, NULL);
+		brcmf_sdiod_func0_wb(sdiodev, SDIO_CCCR_IENx, 0, NULL);
 		sdio_release_host(sdiodev->func[1]);
 
 		sdiodev->oob_irq_requested = false;
@@ -242,8 +240,8 @@ static int brcmf_sdiod_set_sbaddr_window(struct brcmf_sdio_dev *sdiodev,
 	addr = (address & SBSDIO_SBWINDOW_MASK) >> 8;
 
 	for (i = 0 ; i < 3 && !err ; i++, addr >>= 8)
-		brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_SBADDRLOW + i,
-				  addr & 0xff, &err);
+		brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_SBADDRLOW + i,
+				   addr & 0xff, &err);
 
 	return err;
 }
@@ -267,123 +265,15 @@ static int brcmf_sdiod_addrprep(struct brcmf_sdio_dev *sdiodev, u32 *addr)
 	return 0;
 }
 
-static inline int brcmf_sdiod_f0_writeb(struct sdio_func *func, u8 byte,
-					uint regaddr)
-{
-	int err_ret;
-
-	/*
-	 * Can only directly write to some F0 registers.
-	 * Handle CCCR_IENx and CCCR_ABORT command
-	 * as a special case.
-	 */
-	if ((regaddr == SDIO_CCCR_ABORT) ||
-	    (regaddr == SDIO_CCCR_IENx))
-		sdio_writeb(func, byte, regaddr, &err_ret);
-	else
-		sdio_f0_writeb(func, byte, regaddr, &err_ret);
-
-	return err_ret;
-}
-
-static int brcmf_sdiod_reg_write(struct brcmf_sdio_dev *sdiodev, u32 addr,
-				 u8 regsz, void *data)
-{
-	int ret;
-
-	/*
-	 * figure out how to read the register based on address range
-	 * 0x00 ~ 0x7FF: function 0 CCCR and FBR
-	 * 0x10000 ~ 0x1FFFF: function 1 miscellaneous registers
-	 * The rest: function 1 silicon backplane core registers
-	 * f0 writes must be bytewise
-	 */
-
-	if ((addr & ~REG_F0_REG_MASK) == 0) {
-		if (WARN_ON(regsz > 1))
-			return -EINVAL;
-		ret = brcmf_sdiod_f0_writeb(sdiodev->func[0], *(u8 *)data, addr);
-	} else {
-		switch (regsz) {
-		case 1:
-			sdio_writeb(sdiodev->func[1], *(u8 *)data, addr, &ret);
-			break;
-		case 4:
-			ret = brcmf_sdiod_addrprep(sdiodev, &addr);
-			if (ret)
-				goto done;
-
-			sdio_writel(sdiodev->func[1], *(u32 *)data, addr, &ret);
-			break;
-		default:
-			WARN(1, "Invalid reg size\n");
-			ret = -EINVAL;
-			break;
-		}
-	}
-
-done:
-	return ret;
-}
-
-static int brcmf_sdiod_reg_read(struct brcmf_sdio_dev *sdiodev, u32 addr,
-				u8 regsz, void *data)
-{
-	int ret;
-
-	/*
-	 * figure out how to read the register based on address range
-	 * 0x00 ~ 0x7FF: function 0 CCCR and FBR
-	 * 0x10000 ~ 0x1FFFF: function 1 miscellaneous registers
-	 * The rest: function 1 silicon backplane core registers
-	 * f0 reads must be bytewise
-	 */
-	if ((addr & ~REG_F0_REG_MASK) == 0) {
-		if (WARN_ON(regsz > 1))
-			return -EINVAL;
-		*(u8 *)data = sdio_f0_readb(sdiodev->func[0], addr, &ret);
-	} else {
-		switch (regsz) {
-		case 1:
-			*(u8 *)data = sdio_readb(sdiodev->func[1], addr, &ret);
-			break;
-		case 4:
-			ret = brcmf_sdiod_addrprep(sdiodev, &addr);
-			if (ret)
-				goto done;
-
-			*(u32 *)data = sdio_readl(sdiodev->func[1], addr, &ret);
-			break;
-		default:
-			WARN(1, "Invalid reg size\n");
-			ret = -EINVAL;
-			break;
-		}
-	}
-
-done:
-	return ret;
-}
-
-u8 brcmf_sdiod_regrb(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret)
+u32 brcmf_sdiod_readl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret)
 {
-	u8 data;
+	u32 data = 0;
 	int retval;
 
-	retval = brcmf_sdiod_reg_read(sdiodev, addr, 1, &data);
+	retval = brcmf_sdiod_addrprep(sdiodev, &addr);
 
-	if (ret)
-		*ret = retval;
-
-	return data;
-}
-
-u32 brcmf_sdiod_regrl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret)
-{
-	u32 data;
-	int retval;
-
-	retval = brcmf_sdiod_reg_read(sdiodev, addr, 4, &data);
+	if (!retval)
+		data = sdio_readl(sdiodev->func[1], addr, &retval);
 
 	if (ret)
 		*ret = retval;
@@ -391,23 +281,15 @@ u32 brcmf_sdiod_regrl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret)
 	return data;
 }
 
-void brcmf_sdiod_regwb(struct brcmf_sdio_dev *sdiodev, u32 addr,
-		      u8 data, int *ret)
+void brcmf_sdiod_writel(struct brcmf_sdio_dev *sdiodev, u32 addr,
+			u32 data, int *ret)
 {
 	int retval;
 
-	retval = brcmf_sdiod_reg_write(sdiodev, addr, 1, &data);
-
-	if (ret)
-		*ret = retval;
-}
-
-void brcmf_sdiod_regwl(struct brcmf_sdio_dev *sdiodev, u32 addr,
-		      u32 data, int *ret)
-{
-	int retval;
+	retval = brcmf_sdiod_addrprep(sdiodev, &addr);
 
-	retval = brcmf_sdiod_reg_write(sdiodev, addr, 4, &data);
+	if (!retval)
+		sdio_writel(sdiodev->func[1], data, addr, &retval);
 
 	if (ret)
 		*ret = retval;
@@ -845,8 +727,8 @@ int brcmf_sdiod_abort(struct brcmf_sdio_dev *sdiodev, u8 fn)
 {
 	brcmf_dbg(SDIO, "Enter\n");
 
-	/* issue abort cmd52 command through F0 */
-	brcmf_sdiod_reg_write(sdiodev, SDIO_CCCR_ABORT, 1, &fn);
+	/* Issue abort cmd52 command through F0 */
+	brcmf_sdiod_func0_wb(sdiodev, SDIO_CCCR_ABORT, fn, NULL);
 
 	brcmf_dbg(SDIO, "Exit\n");
 	return 0;
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
index f3556122c6ac..ce19ccf5d1d6 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
@@ -666,7 +666,7 @@ static int r_sdreg32(struct brcmf_sdio *bus, u32 *regvar, u32 offset)
 	int ret;
 
 	core = brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV);
-	*regvar = brcmf_sdiod_regrl(bus->sdiodev, core->base + offset, &ret);
+	*regvar = brcmf_sdiod_readl(bus->sdiodev, core->base + offset, &ret);
 
 	return ret;
 }
@@ -677,7 +677,7 @@ static int w_sdreg32(struct brcmf_sdio *bus, u32 regval, u32 reg_offset)
 	int ret;
 
 	core = brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV);
-	brcmf_sdiod_regwl(bus->sdiodev, core->base + reg_offset, regval, &ret);
+	brcmf_sdiod_writel(bus->sdiodev, core->base + reg_offset, regval, &ret);
 
 	return ret;
 }
@@ -694,8 +694,7 @@ brcmf_sdio_kso_control(struct brcmf_sdio *bus, bool on)
 
 	wr_val = (on << SBSDIO_FUNC1_SLEEPCSR_KSO_SHIFT);
 	/* 1st KSO write goes to AOS wake up core if device is asleep  */
-	brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR,
-			  wr_val, &err);
+	brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, wr_val, &err);
 
 	if (on) {
 		/* device WAKEUP through KSO:
@@ -721,7 +720,7 @@ brcmf_sdio_kso_control(struct brcmf_sdio *bus, bool on)
 		 * just one write attempt may fail,
 		 * read it back until it matches written value
 		 */
-		rd_val = brcmf_sdiod_regrb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR,
+		rd_val = brcmf_sdiod_readb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR,
 					   &err);
 		if (!err) {
 			if ((rd_val & bmask) == cmp_val)
@@ -731,9 +730,11 @@ brcmf_sdio_kso_control(struct brcmf_sdio *bus, bool on)
 		/* bail out upon subsequent access errors */
 		if (err && (err_cnt++ > BRCMF_SDIO_MAX_ACCESS_ERRORS))
 			break;
+
 		udelay(KSO_WAIT_US);
-		brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR,
-				  wr_val, &err);
+		brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, wr_val,
+				   &err);
+
 	} while (try_cnt++ < MAX_KSO_ATTEMPTS);
 
 	if (try_cnt > 2)
@@ -769,15 +770,15 @@ static int brcmf_sdio_htclk(struct brcmf_sdio *bus, bool on, bool pendok)
 		clkreq =
 		    bus->alp_only ? SBSDIO_ALP_AVAIL_REQ : SBSDIO_HT_AVAIL_REQ;
 
-		brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
-				  clkreq, &err);
+		brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
+				   clkreq, &err);
 		if (err) {
 			brcmf_err("HT Avail request error: %d\n", err);
 			return -EBADE;
 		}
 
 		/* Check current status */
-		clkctl = brcmf_sdiod_regrb(bus->sdiodev,
+		clkctl = brcmf_sdiod_readb(bus->sdiodev,
 					   SBSDIO_FUNC1_CHIPCLKCSR, &err);
 		if (err) {
 			brcmf_err("HT Avail read error: %d\n", err);
@@ -787,35 +788,34 @@ static int brcmf_sdio_htclk(struct brcmf_sdio *bus, bool on, bool pendok)
 		/* Go to pending and await interrupt if appropriate */
 		if (!SBSDIO_CLKAV(clkctl, bus->alp_only) && pendok) {
 			/* Allow only clock-available interrupt */
-			devctl = brcmf_sdiod_regrb(bus->sdiodev,
+			devctl = brcmf_sdiod_readb(bus->sdiodev,
 						   SBSDIO_DEVICE_CTL, &err);
 			if (err) {
-				brcmf_err("Devctl error setting CA: %d\n",
-					  err);
+				brcmf_err("Devctl error setting CA: %d\n", err);
 				return -EBADE;
 			}
 
 			devctl |= SBSDIO_DEVCTL_CA_INT_ONLY;
-			brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL,
-					  devctl, &err);
+			brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_DEVICE_CTL,
+					   devctl, &err);
 			brcmf_dbg(SDIO, "CLKCTL: set PENDING\n");
 			bus->clkstate = CLK_PENDING;
 
 			return 0;
 		} else if (bus->clkstate == CLK_PENDING) {
 			/* Cancel CA-only interrupt filter */
-			devctl = brcmf_sdiod_regrb(bus->sdiodev,
+			devctl = brcmf_sdiod_readb(bus->sdiodev,
 						   SBSDIO_DEVICE_CTL, &err);
 			devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY;
-			brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL,
-					  devctl, &err);
+			brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_DEVICE_CTL,
+					   devctl, &err);
 		}
 
 		/* Otherwise, wait here (polling) for HT Avail */
 		timeout = jiffies +
 			  msecs_to_jiffies(PMU_MAX_TRANSITION_DLY/1000);
 		while (!SBSDIO_CLKAV(clkctl, bus->alp_only)) {
-			clkctl = brcmf_sdiod_regrb(bus->sdiodev,
+			clkctl = brcmf_sdiod_readb(bus->sdiodev,
 						   SBSDIO_FUNC1_CHIPCLKCSR,
 						   &err);
 			if (time_after(jiffies, timeout))
@@ -849,16 +849,16 @@ static int brcmf_sdio_htclk(struct brcmf_sdio *bus, bool on, bool pendok)
 
 		if (bus->clkstate == CLK_PENDING) {
 			/* Cancel CA-only interrupt filter */
-			devctl = brcmf_sdiod_regrb(bus->sdiodev,
+			devctl = brcmf_sdiod_readb(bus->sdiodev,
 						   SBSDIO_DEVICE_CTL, &err);
 			devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY;
-			brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL,
-					  devctl, &err);
+			brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_DEVICE_CTL,
+					   devctl, &err);
 		}
 
 		bus->clkstate = CLK_SDONLY;
-		brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
-				  clkreq, &err);
+		brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
+				   clkreq, &err);
 		brcmf_dbg(SDIO, "CLKCTL: turned OFF\n");
 		if (err) {
 			brcmf_err("Failed access turning clock off: %d\n",
@@ -948,14 +948,14 @@ brcmf_sdio_bus_sleep(struct brcmf_sdio *bus, bool sleep, bool pendok)
 
 		/* Going to sleep */
 		if (sleep) {
-			clkcsr = brcmf_sdiod_regrb(bus->sdiodev,
+			clkcsr = brcmf_sdiod_readb(bus->sdiodev,
 						   SBSDIO_FUNC1_CHIPCLKCSR,
 						   &err);
 			if ((clkcsr & SBSDIO_CSR_MASK) == 0) {
 				brcmf_dbg(SDIO, "no clock, set ALP\n");
-				brcmf_sdiod_regwb(bus->sdiodev,
-						  SBSDIO_FUNC1_CHIPCLKCSR,
-						  SBSDIO_ALP_AVAIL_REQ, &err);
+				brcmf_sdiod_writeb(bus->sdiodev,
+						   SBSDIO_FUNC1_CHIPCLKCSR,
+						   SBSDIO_ALP_AVAIL_REQ, &err);
 			}
 			err = brcmf_sdio_kso_control(bus, false);
 		} else {
@@ -1170,16 +1170,14 @@ static void brcmf_sdio_rxfail(struct brcmf_sdio *bus, bool abort, bool rtx)
 	if (abort)
 		brcmf_sdiod_abort(bus->sdiodev, SDIO_FUNC_2);
 
-	brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL,
-			  SFC_RF_TERM, &err);
+	brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL, SFC_RF_TERM,
+			   &err);
 	bus->sdcnt.f1regdata++;
 
 	/* Wait until the packet has been flushed (device/FIFO stable) */
 	for (lastrbc = retries = 0xffff; retries > 0; retries--) {
-		hi = brcmf_sdiod_regrb(bus->sdiodev,
-				       SBSDIO_FUNC1_RFRAMEBCHI, &err);
-		lo = brcmf_sdiod_regrb(bus->sdiodev,
-				       SBSDIO_FUNC1_RFRAMEBCLO, &err);
+		hi = brcmf_sdiod_readb(bus->sdiodev, SBSDIO_FUNC1_RFRAMEBCHI, &err);
+		lo = brcmf_sdiod_readb(bus->sdiodev, SBSDIO_FUNC1_RFRAMEBCLO, &err);
 		bus->sdcnt.f1regdata += 2;
 
 		if ((hi == 0) && (lo == 0))
@@ -1221,12 +1219,12 @@ static void brcmf_sdio_txfail(struct brcmf_sdio *bus)
 	bus->sdcnt.tx_sderrs++;
 
 	brcmf_sdiod_abort(sdiodev, SDIO_FUNC_2);
-	brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_FRAMECTRL, SFC_WF_TERM, NULL);
+	brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_FRAMECTRL, SFC_WF_TERM, NULL);
 	bus->sdcnt.f1regdata++;
 
 	for (i = 0; i < 3; i++) {
-		hi = brcmf_sdiod_regrb(sdiodev, SBSDIO_FUNC1_WFRAMEBCHI, NULL);
-		lo = brcmf_sdiod_regrb(sdiodev, SBSDIO_FUNC1_WFRAMEBCLO, NULL);
+		hi = brcmf_sdiod_readb(sdiodev, SBSDIO_FUNC1_WFRAMEBCHI, NULL);
+		lo = brcmf_sdiod_readb(sdiodev, SBSDIO_FUNC1_WFRAMEBCLO, NULL);
 		bus->sdcnt.f1regdata += 2;
 		if ((hi == 0) && (lo == 0))
 			break;
@@ -2438,11 +2436,11 @@ static void brcmf_sdio_bus_stop(struct device *dev)
 		bus->hostintmask = 0;
 
 		/* Force backplane clocks to assure F2 interrupt propagates */
-		saveclk = brcmf_sdiod_regrb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
+		saveclk = brcmf_sdiod_readb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
 					    &err);
 		if (!err)
-			brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
-					  (saveclk | SBSDIO_FORCE_HT), &err);
+			brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
+					   (saveclk | SBSDIO_FORCE_HT), &err);
 		if (err)
 			brcmf_err("Failed to force clock for F2: err %d\n",
 				  err);
@@ -2501,7 +2499,7 @@ static int brcmf_sdio_intr_rstatus(struct brcmf_sdio *bus)
 	buscore = brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV);
 	addr = buscore->base + offsetof(struct sdpcmd_regs, intstatus);
 
-	val = brcmf_sdiod_regrl(bus->sdiodev, addr, &ret);
+	val = brcmf_sdiod_readl(bus->sdiodev, addr, &ret);
 	bus->sdcnt.f1regdata++;
 	if (ret != 0)
 		return ret;
@@ -2511,7 +2509,7 @@ static int brcmf_sdio_intr_rstatus(struct brcmf_sdio *bus)
 
 	/* Clear interrupts */
 	if (val) {
-		brcmf_sdiod_regwl(bus->sdiodev, addr, val, &ret);
+		brcmf_sdiod_writel(bus->sdiodev, addr, val, &ret);
 		bus->sdcnt.f1regdata++;
 		atomic_or(val, &bus->intstatus);
 	}
@@ -2537,23 +2535,23 @@ static void brcmf_sdio_dpc(struct brcmf_sdio *bus)
 
 #ifdef DEBUG
 		/* Check for inconsistent device control */
-		devctl = brcmf_sdiod_regrb(bus->sdiodev,
-					   SBSDIO_DEVICE_CTL, &err);
+		devctl = brcmf_sdiod_readb(bus->sdiodev, SBSDIO_DEVICE_CTL,
+					   &err);
 #endif				/* DEBUG */
 
 		/* Read CSR, if clock on switch to AVAIL, else ignore */
-		clkctl = brcmf_sdiod_regrb(bus->sdiodev,
+		clkctl = brcmf_sdiod_readb(bus->sdiodev,
 					   SBSDIO_FUNC1_CHIPCLKCSR, &err);
 
 		brcmf_dbg(SDIO, "DPC: PENDING, devctl 0x%02x clkctl 0x%02x\n",
 			  devctl, clkctl);
 
 		if (SBSDIO_HTAV(clkctl)) {
-			devctl = brcmf_sdiod_regrb(bus->sdiodev,
+			devctl = brcmf_sdiod_readb(bus->sdiodev,
 						   SBSDIO_DEVICE_CTL, &err);
 			devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY;
-			brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL,
-					  devctl, &err);
+			brcmf_sdiod_writeb(bus->sdiodev,
+					   SBSDIO_DEVICE_CTL, devctl, &err);
 			bus->clkstate = CLK_AVAIL;
 		}
 	}
@@ -3339,31 +3337,31 @@ static void brcmf_sdio_sr_init(struct brcmf_sdio *bus)
 
 	brcmf_dbg(TRACE, "Enter\n");
 
-	val = brcmf_sdiod_regrb(bus->sdiodev, SBSDIO_FUNC1_WAKEUPCTRL, &err);
+	val = brcmf_sdiod_readb(bus->sdiodev, SBSDIO_FUNC1_WAKEUPCTRL, &err);
 	if (err) {
 		brcmf_err("error reading SBSDIO_FUNC1_WAKEUPCTRL\n");
 		return;
 	}
 
 	val |= 1 << SBSDIO_FUNC1_WCTRL_HTWAIT_SHIFT;
-	brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_WAKEUPCTRL, val, &err);
+	brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_WAKEUPCTRL, val, &err);
 	if (err) {
 		brcmf_err("error writing SBSDIO_FUNC1_WAKEUPCTRL\n");
 		return;
 	}
 
 	/* Add CMD14 Support */
-	brcmf_sdiod_regwb(bus->sdiodev, SDIO_CCCR_BRCM_CARDCAP,
-			  (SDIO_CCCR_BRCM_CARDCAP_CMD14_SUPPORT |
-			   SDIO_CCCR_BRCM_CARDCAP_CMD14_EXT),
-			  &err);
+	brcmf_sdiod_func0_wb(bus->sdiodev, SDIO_CCCR_BRCM_CARDCAP,
+			     (SDIO_CCCR_BRCM_CARDCAP_CMD14_SUPPORT |
+			      SDIO_CCCR_BRCM_CARDCAP_CMD14_EXT),
+			     &err);
 	if (err) {
 		brcmf_err("error writing SDIO_CCCR_BRCM_CARDCAP\n");
 		return;
 	}
 
-	brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
-			  SBSDIO_FORCE_HT, &err);
+	brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
+			   SBSDIO_FORCE_HT, &err);
 	if (err) {
 		brcmf_err("error writing SBSDIO_FUNC1_CHIPCLKCSR\n");
 		return;
@@ -3386,7 +3384,7 @@ static int brcmf_sdio_kso_init(struct brcmf_sdio *bus)
 	if (brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV)->rev < 12)
 		return 0;
 
-	val = brcmf_sdiod_regrb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, &err);
+	val = brcmf_sdiod_readb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, &err);
 	if (err) {
 		brcmf_err("error reading SBSDIO_FUNC1_SLEEPCSR\n");
 		return err;
@@ -3395,8 +3393,7 @@ static int brcmf_sdio_kso_init(struct brcmf_sdio *bus)
 	if (!(val & SBSDIO_FUNC1_SLEEPCSR_KSO_MASK)) {
 		val |= (SBSDIO_FUNC1_SLEEPCSR_KSO_EN <<
 			SBSDIO_FUNC1_SLEEPCSR_KSO_SHIFT);
-		brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR,
-				  val, &err);
+		brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, val, &err);
 		if (err) {
 			brcmf_err("error writing SBSDIO_FUNC1_SLEEPCSR\n");
 			return err;
@@ -3557,9 +3554,9 @@ static void brcmf_sdio_bus_watchdog(struct brcmf_sdio *bus)
 				u8 devpend;
 
 				sdio_claim_host(bus->sdiodev->func[1]);
-				devpend = brcmf_sdiod_regrb(bus->sdiodev,
-							    SDIO_CCCR_INTx,
-							    NULL);
+				devpend = brcmf_sdiod_func0_rb(bus->sdiodev,
+							       SDIO_CCCR_INTx,
+							       NULL);
 				sdio_release_host(bus->sdiodev->func[1]);
 				intstatus = devpend & (INTR_STATUS_FUNC1 |
 						       INTR_STATUS_FUNC2);
@@ -3697,12 +3694,12 @@ brcmf_sdio_drivestrengthinit(struct brcmf_sdio_dev *sdiodev,
 			}
 		}
 		addr = CORE_CC_REG(pmu->base, chipcontrol_addr);
-		brcmf_sdiod_regwl(sdiodev, addr, 1, NULL);
-		cc_data_temp = brcmf_sdiod_regrl(sdiodev, addr, NULL);
+		brcmf_sdiod_writel(sdiodev, addr, 1, NULL);
+		cc_data_temp = brcmf_sdiod_readl(sdiodev, addr, NULL);
 		cc_data_temp &= ~str_mask;
 		drivestrength_sel <<= str_shift;
 		cc_data_temp |= drivestrength_sel;
-		brcmf_sdiod_regwl(sdiodev, addr, cc_data_temp, NULL);
+		brcmf_sdiod_writel(sdiodev, addr, cc_data_temp, NULL);
 
 		brcmf_dbg(INFO, "SDIO: %d mA (req=%d mA) drive strength selected, set to 0x%08x\n",
 			  str_tab[i].strength, drivestrength, cc_data_temp);
@@ -3717,7 +3714,7 @@ static int brcmf_sdio_buscoreprep(void *ctx)
 
 	/* Try forcing SDIO core to do ALPAvail request only */
 	clkset = SBSDIO_FORCE_HW_CLKREQ_OFF | SBSDIO_ALP_AVAIL_REQ;
-	brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err);
+	brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err);
 	if (err) {
 		brcmf_err("error writing for HT off\n");
 		return err;
@@ -3725,8 +3722,7 @@ static int brcmf_sdio_buscoreprep(void *ctx)
 
 	/* If register supported, wait for ALPAvail and then force ALP */
 	/* This may take up to 15 milliseconds */
-	clkval = brcmf_sdiod_regrb(sdiodev,
-				   SBSDIO_FUNC1_CHIPCLKCSR, NULL);
+	clkval = brcmf_sdiod_readb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, NULL);
 
 	if ((clkval & ~SBSDIO_AVBITS) != clkset) {
 		brcmf_err("ChipClkCSR access: wrote 0x%02x read 0x%02x\n",
@@ -3734,10 +3730,11 @@ static int brcmf_sdio_buscoreprep(void *ctx)
 		return -EACCES;
 	}
 
-	SPINWAIT(((clkval = brcmf_sdiod_regrb(sdiodev,
-					      SBSDIO_FUNC1_CHIPCLKCSR, NULL)),
-			!SBSDIO_ALPAV(clkval)),
-			PMU_MAX_TRANSITION_DLY);
+	SPINWAIT(((clkval = brcmf_sdiod_readb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
+					      NULL)),
+		 !SBSDIO_ALPAV(clkval)),
+		 PMU_MAX_TRANSITION_DLY);
+
 	if (!SBSDIO_ALPAV(clkval)) {
 		brcmf_err("timeout on ALPAV wait, clkval 0x%02x\n",
 			  clkval);
@@ -3745,11 +3742,11 @@ static int brcmf_sdio_buscoreprep(void *ctx)
 	}
 
 	clkset = SBSDIO_FORCE_HW_CLKREQ_OFF | SBSDIO_FORCE_ALP;
-	brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err);
+	brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err);
 	udelay(65);
 
 	/* Also, disable the extra SDIO pull-ups */
-	brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_SDIOPULLUP, 0, NULL);
+	brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_SDIOPULLUP, 0, NULL);
 
 	return 0;
 }
@@ -3764,7 +3761,7 @@ static void brcmf_sdio_buscore_activate(void *ctx, struct brcmf_chip *chip,
 	/* clear all interrupts */
 	core = brcmf_chip_get_core(chip, BCMA_CORE_SDIO_DEV);
 	reg_addr = core->base + offsetof(struct sdpcmd_regs, intstatus);
-	brcmf_sdiod_regwl(sdiodev, reg_addr, 0xFFFFFFFF, NULL);
+	brcmf_sdiod_writel(sdiodev, reg_addr, 0xFFFFFFFF, NULL);
 
 	if (rstvec)
 		/* Write reset vector to address 0 */
@@ -3777,7 +3774,7 @@ static u32 brcmf_sdio_buscore_read32(void *ctx, u32 addr)
 	struct brcmf_sdio_dev *sdiodev = ctx;
 	u32 val, rev;
 
-	val = brcmf_sdiod_regrl(sdiodev, addr, NULL);
+	val = brcmf_sdiod_readl(sdiodev, addr, NULL);
 	if ((sdiodev->func[0]->device == SDIO_DEVICE_ID_BROADCOM_4335_4339 ||
 	     sdiodev->func[0]->device == SDIO_DEVICE_ID_BROADCOM_4339) &&
 	    addr == CORE_CC_REG(SI_ENUM_BASE, chipid)) {
@@ -3794,7 +3791,7 @@ static void brcmf_sdio_buscore_write32(void *ctx, u32 addr, u32 val)
 {
 	struct brcmf_sdio_dev *sdiodev = ctx;
 
-	brcmf_sdiod_regwl(sdiodev, addr, val, NULL);
+	brcmf_sdiod_writel(sdiodev, addr, val, NULL);
 }
 
 static const struct brcmf_buscore_ops brcmf_sdio_buscore_ops = {
@@ -3818,18 +3815,18 @@ brcmf_sdio_probe_attach(struct brcmf_sdio *bus)
 	sdio_claim_host(sdiodev->func[1]);
 
 	pr_debug("F1 signature read @0x18000000=0x%4x\n",
-		 brcmf_sdiod_regrl(sdiodev, SI_ENUM_BASE, NULL));
+		 brcmf_sdiod_readl(sdiodev, SI_ENUM_BASE, NULL));
 
 	/*
 	 * Force PLL off until brcmf_chip_attach()
 	 * programs PLL control regs
 	 */
 
-	brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
-			  BRCMF_INIT_CLKCTL1, &err);
+	brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, BRCMF_INIT_CLKCTL1,
+			   &err);
 	if (!err)
-		clkctl = brcmf_sdiod_regrb(sdiodev,
-					   SBSDIO_FUNC1_CHIPCLKCSR, &err);
+		clkctl = brcmf_sdiod_readb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
+					   &err);
 
 	if (err || ((clkctl & ~SBSDIO_AVBITS) != BRCMF_INIT_CLKCTL1)) {
 		brcmf_err("ChipClkCSR access: err %d wrote 0x%02x read 0x%02x\n",
@@ -3889,25 +3886,25 @@ brcmf_sdio_probe_attach(struct brcmf_sdio *bus)
 	brcmf_sdio_drivestrengthinit(sdiodev, bus->ci, drivestrength);
 
 	/* Set card control so an SDIO card reset does a WLAN backplane reset */
-	reg_val = brcmf_sdiod_regrb(sdiodev, SDIO_CCCR_BRCM_CARDCTRL, &err);
+	reg_val = brcmf_sdiod_func0_rb(sdiodev, SDIO_CCCR_BRCM_CARDCTRL, &err);
 	if (err)
 		goto fail;
 
 	reg_val |= SDIO_CCCR_BRCM_CARDCTRL_WLANRESET;
 
-	brcmf_sdiod_regwb(sdiodev, SDIO_CCCR_BRCM_CARDCTRL, reg_val, &err);
+	brcmf_sdiod_func0_wb(sdiodev, SDIO_CCCR_BRCM_CARDCTRL, reg_val, &err);
 	if (err)
 		goto fail;
 
 	/* set PMUControl so a backplane reset does PMU state reload */
 	reg_addr = CORE_CC_REG(brcmf_chip_get_pmu(bus->ci)->base, pmucontrol);
-	reg_val = brcmf_sdiod_regrl(sdiodev, reg_addr, &err);
+	reg_val = brcmf_sdiod_readl(sdiodev, reg_addr, &err);
 	if (err)
 		goto fail;
 
 	reg_val |= (BCMA_CC_PMU_CTL_RES_RELOAD << BCMA_CC_PMU_CTL_RES_SHIFT);
 
-	brcmf_sdiod_regwl(sdiodev, reg_addr, reg_val, &err);
+	brcmf_sdiod_writel(sdiodev, reg_addr, reg_val, &err);
 	if (err)
 		goto fail;
 
@@ -4028,10 +4025,10 @@ static void brcmf_sdio_firmware_callback(struct device *dev, int err,
 		goto release;
 
 	/* Force clocks on backplane to be sure F2 interrupt propagates */
-	saveclk = brcmf_sdiod_regrb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, &err);
+	saveclk = brcmf_sdiod_readb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, &err);
 	if (!err) {
-		brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
-				  (saveclk | SBSDIO_FORCE_HT), &err);
+		brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
+				   (saveclk | SBSDIO_FORCE_HT), &err);
 	}
 	if (err) {
 		brcmf_err("Failed to force clock for F2: err %d\n", err);
@@ -4053,7 +4050,7 @@ static void brcmf_sdio_firmware_callback(struct device *dev, int err,
 		w_sdreg32(bus, bus->hostintmask,
 			  offsetof(struct sdpcmd_regs, hostintmask));
 
-		brcmf_sdiod_regwb(sdiodev, SBSDIO_WATERMARK, 8, &err);
+		brcmf_sdiod_writeb(sdiodev, SBSDIO_WATERMARK, 8, &err);
 	} else {
 		/* Disable F2 again */
 		sdio_disable_func(sdiodev->func[SDIO_FUNC_2]);
@@ -4064,8 +4061,7 @@ static void brcmf_sdio_firmware_callback(struct device *dev, int err,
 		brcmf_sdio_sr_init(bus);
 	} else {
 		/* Restore previous clock setting */
-		brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
-				  saveclk, &err);
+		brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, saveclk, &err);
 	}
 
 	if (err == 0) {
@@ -4200,7 +4196,7 @@ struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev)
 	bus->rxflow = false;
 
 	/* Done with backplane-dependent accesses, can drop clock... */
-	brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, 0, NULL);
+	brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, 0, NULL);
 
 	sdio_release_host(bus->sdiodev->func[1]);
 
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
index 1e4b4760159f..453213b071de 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
@@ -50,6 +50,7 @@
 #define SBSDIO_NUM_FUNCTION		3
 
 /* function 0 vendor specific CCCR registers */
+
 #define SDIO_CCCR_BRCM_CARDCAP			0xf0
 #define SDIO_CCCR_BRCM_CARDCAP_CMD14_SUPPORT	0x02
 #define SDIO_CCCR_BRCM_CARDCAP_CMD14_EXT	0x04
@@ -131,8 +132,6 @@
 /* with b15, maps to 32-bit SB access */
 #define SBSDIO_SB_ACCESS_2_4B_FLAG	0x08000
 
-/* valid bits in SBSDIO_FUNC1_SBADDRxxx regs */
-
 /* Address bits from SBADDR regs */
 #define SBSDIO_SBWINDOW_MASK		0xffff8000
 
@@ -293,13 +292,24 @@ struct sdpcmd_regs {
 int brcmf_sdiod_intr_register(struct brcmf_sdio_dev *sdiodev);
 void brcmf_sdiod_intr_unregister(struct brcmf_sdio_dev *sdiodev);
 
-/* sdio device register access interface */
-u8 brcmf_sdiod_regrb(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret);
-u32 brcmf_sdiod_regrl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret);
-void brcmf_sdiod_regwb(struct brcmf_sdio_dev *sdiodev, u32 addr, u8 data,
-		       int *ret);
-void brcmf_sdiod_regwl(struct brcmf_sdio_dev *sdiodev, u32 addr, u32 data,
-		       int *ret);
+/* SDIO device register access interface */
+/* Accessors for SDIO Function 0 */
+#define brcmf_sdiod_func0_rb(sdiodev, addr, r) \
+	sdio_readb((sdiodev)->func[0], (addr), (r))
+
+#define brcmf_sdiod_func0_wb(sdiodev, addr, v, ret) \
+	sdio_writeb((sdiodev)->func[0], (v), (addr), (ret))
+
+/* Accessors for SDIO Function 1 */
+#define brcmf_sdiod_readb(sdiodev, addr, r) \
+	sdio_readb((sdiodev)->func[1], (addr), (r))
+
+#define brcmf_sdiod_writeb(sdiodev, addr, v, ret) \
+	sdio_writeb((sdiodev)->func[1], (v), (addr), (ret))
+
+u32 brcmf_sdiod_readl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret);
+void brcmf_sdiod_writel(struct brcmf_sdio_dev *sdiodev, u32 addr, u32 data,
+			int *ret);
 
 /* Buffer transfer to/from device (client) core via cmd53.
  *   fn:       function number
-- 
2.11.0

[PATCH 15/30] brcmfmac: Tidy register definitions a little

[Ian Molton]

Trivial tidy of register definitions.

Signed-off-by: Ian Molton <ian@mnementh.co.uk>
---
 .../net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c |  4 ++--
 .../net/wireless/broadcom/brcm80211/brcmfmac/sdio.h   | 19 ++++++++++---------
 2 files changed, 12 insertions(+), 11 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
index 50f207bb3dc6..721c7bd9478f 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
@@ -152,9 +152,9 @@ int brcmf_sdiod_intr_register(struct brcmf_sdio_dev *sdiodev)
 		brcmf_sdiod_func0_wb(sdiodev, SDIO_CCCR_IENx, data, &ret);
 
 		/* redirect, configure and enable io for interrupt signal */
-		data = SDIO_SEPINT_MASK | SDIO_SEPINT_OE;
+		data = SDIO_CCCR_BRCM_SEPINT_MASK | SDIO_CCCR_BRCM_SEPINT_OE;
 		if (pdata->oob_irq_flags & IRQF_TRIGGER_HIGH)
-			data |= SDIO_SEPINT_ACT_HI;
+			data |= SDIO_CCCR_BRCM_SEPINT_ACT_HI;
 		brcmf_sdiod_func0_wb(sdiodev, SDIO_CCCR_BRCM_SEPINT, data, &ret);
 		sdio_release_host(sdiodev->func[1]);
 	} else {
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
index 453213b071de..01def16cd236 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
@@ -52,16 +52,17 @@
 /* function 0 vendor specific CCCR registers */
 
 #define SDIO_CCCR_BRCM_CARDCAP			0xf0
-#define SDIO_CCCR_BRCM_CARDCAP_CMD14_SUPPORT	0x02
-#define SDIO_CCCR_BRCM_CARDCAP_CMD14_EXT	0x04
-#define SDIO_CCCR_BRCM_CARDCAP_CMD_NODEC	0x08
-#define SDIO_CCCR_BRCM_CARDCTRL		0xf1
-#define SDIO_CCCR_BRCM_CARDCTRL_WLANRESET	0x02
-#define SDIO_CCCR_BRCM_SEPINT			0xf2
+#define SDIO_CCCR_BRCM_CARDCAP_CMD14_SUPPORT	BIT(1)
+#define SDIO_CCCR_BRCM_CARDCAP_CMD14_EXT	BIT(2)
+#define SDIO_CCCR_BRCM_CARDCAP_CMD_NODEC	BIT(3)
+
+#define SDIO_CCCR_BRCM_CARDCTRL			0xf1
+#define SDIO_CCCR_BRCM_CARDCTRL_WLANRESET	BIT(1)
 
-#define  SDIO_SEPINT_MASK		0x01
-#define  SDIO_SEPINT_OE			0x02
-#define  SDIO_SEPINT_ACT_HI		0x04
+#define SDIO_CCCR_BRCM_SEPINT			0xf2
+#define SDIO_CCCR_BRCM_SEPINT_MASK		BIT(0)
+#define SDIO_CCCR_BRCM_SEPINT_OE		BIT(1)
+#define SDIO_CCCR_BRCM_SEPINT_ACT_HI		BIT(2)
 
 /* function 1 miscellaneous registers */
 
-- 
2.11.0

[PATCH 16/30] brcmfmac: Remove brcmf_sdiod_addrprep()

[Ian Molton]

This function has become trivial enough that it may as well be pushed into
its callers, which has the side-benefit of clarifying what's going on.

Remove it, and rename brcmf_sdiod_set_sbaddr_window() to
brcmf_sdiod_set_backplane_window() as it's easier to understand.

Signed-off-by: Ian Molton <ian@mnementh.co.uk>
---
 .../wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c  | 84 ++++++++++++----------
 1 file changed, 46 insertions(+), 38 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
index 721c7bd9478f..0d37c68637f2 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
@@ -228,41 +228,25 @@ void brcmf_sdiod_change_state(struct brcmf_sdio_dev *sdiodev,
 	sdiodev->state = state;
 }
 
-static int brcmf_sdiod_set_sbaddr_window(struct brcmf_sdio_dev *sdiodev,
-					 u32 address)
+static int
+brcmf_sdiod_set_backplane_window(struct brcmf_sdio_dev *sdiodev, u32 addr)
 {
+	u32 v, bar0 = addr & SBSDIO_SBWINDOW_MASK;
 	int err = 0, i;
-	u32 addr;
 
-	if (sdiodev->state == BRCMF_SDIOD_NOMEDIUM)
-		return -ENOMEDIUM;
+	if (bar0 == sdiodev->sbwad)
+		return 0;
 
-	addr = (address & SBSDIO_SBWINDOW_MASK) >> 8;
+	v = bar0 >> 8;
 
-	for (i = 0 ; i < 3 && !err ; i++, addr >>= 8)
+	for (i = 0 ; i < 3 && !err ; i++, v >>= 8)
 		brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_SBADDRLOW + i,
-				   addr & 0xff, &err);
-
-	return err;
-}
-
-static int brcmf_sdiod_addrprep(struct brcmf_sdio_dev *sdiodev, u32 *addr)
-{
-	uint bar0 = *addr & ~SBSDIO_SB_OFT_ADDR_MASK;
-	int err = 0;
-
-	if (bar0 != sdiodev->sbwad) {
-		err = brcmf_sdiod_set_sbaddr_window(sdiodev, bar0);
-		if (err)
-			return err;
+				   v & 0xff, &err);
 
+	if (!err)
 		sdiodev->sbwad = bar0;
-	}
-
-	*addr &= SBSDIO_SB_OFT_ADDR_MASK;
-	*addr |= SBSDIO_SB_ACCESS_2_4B_FLAG;
 
-	return 0;
+	return err;
 }
 
 u32 brcmf_sdiod_readl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret)
@@ -270,11 +254,16 @@ u32 brcmf_sdiod_readl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret)
 	u32 data = 0;
 	int retval;
 
-	retval = brcmf_sdiod_addrprep(sdiodev, &addr);
+	retval = brcmf_sdiod_set_backplane_window(sdiodev, addr);
+	if (retval)
+		goto out;
+
+	addr &= SBSDIO_SB_OFT_ADDR_MASK;
+	addr |= SBSDIO_SB_ACCESS_2_4B_FLAG;
 
-	if (!retval)
-		data = sdio_readl(sdiodev->func[1], addr, &retval);
+	data = sdio_readl(sdiodev->func[1], addr, &retval);
 
+out:
 	if (ret)
 		*ret = retval;
 
@@ -286,11 +275,16 @@ void brcmf_sdiod_writel(struct brcmf_sdio_dev *sdiodev, u32 addr,
 {
 	int retval;
 
-	retval = brcmf_sdiod_addrprep(sdiodev, &addr);
+	retval = brcmf_sdiod_set_backplane_window(sdiodev, addr);
+	if (retval)
+		goto out;
+
+	addr &= SBSDIO_SB_OFT_ADDR_MASK;
+	addr |= SBSDIO_SB_ACCESS_2_4B_FLAG;
 
-	if (!retval)
-		sdio_writel(sdiodev->func[1], data, addr, &retval);
+	sdio_writel(sdiodev->func[1], data, addr, &retval);
 
+out:
 	if (ret)
 		*ret = retval;
 }
@@ -538,10 +532,13 @@ int brcmf_sdiod_recv_pkt(struct brcmf_sdio_dev *sdiodev, struct sk_buff *pkt)
 
 	brcmf_dbg(SDIO, "addr = 0x%x, size = %d\n", addr, pkt->len);
 
-	err = brcmf_sdiod_addrprep(sdiodev, &addr);
+	err = brcmf_sdiod_set_backplane_window(sdiodev, addr);
 	if (err)
 		goto done;
 
+	addr &= SBSDIO_SB_OFT_ADDR_MASK;
+	addr |= SBSDIO_SB_ACCESS_2_4B_FLAG;
+
 	err = brcmf_sdiod_buff_read(sdiodev, SDIO_FUNC_2, addr, pkt);
 
 done:
@@ -559,10 +556,13 @@ int brcmf_sdiod_recv_chain(struct brcmf_sdio_dev *sdiodev,
 	brcmf_dbg(SDIO, "addr = 0x%x, size = %d\n",
 		  addr, pktq->qlen);
 
-	err = brcmf_sdiod_addrprep(sdiodev, &addr);
+	err = brcmf_sdiod_set_backplane_window(sdiodev, addr);
 	if (err)
 		goto done;
 
+	addr &= SBSDIO_SB_OFT_ADDR_MASK;
+	addr |= SBSDIO_SB_ACCESS_2_4B_FLAG;
+
 	if (pktq->qlen == 1)
 		err = brcmf_sdiod_buff_read(sdiodev, SDIO_FUNC_2, addr,
 					    pktq->next);
@@ -604,7 +604,12 @@ int brcmf_sdiod_send_buf(struct brcmf_sdio_dev *sdiodev, u8 *buf, uint nbytes)
 
 	memcpy(mypkt->data, buf, nbytes);
 
-	err = brcmf_sdiod_addrprep(sdiodev, &addr);
+	err = brcmf_sdiod_set_backplane_window(sdiodev, addr);
+	if (err)
+		return err;
+
+	addr &= SBSDIO_SB_OFT_ADDR_MASK;
+	addr |= SBSDIO_SB_ACCESS_2_4B_FLAG;
 
 	if (!err)
 		err = brcmf_sdiod_buff_write(sdiodev, SDIO_FUNC_2, addr, mypkt);
@@ -623,10 +628,13 @@ int brcmf_sdiod_send_pkt(struct brcmf_sdio_dev *sdiodev,
 
 	brcmf_dbg(SDIO, "addr = 0x%x, size = %d\n", addr, pktq->qlen);
 
-	err = brcmf_sdiod_addrprep(sdiodev, &addr);
+	err = brcmf_sdiod_set_backplane_window(sdiodev, addr);
 	if (err)
 		return err;
 
+	addr &= SBSDIO_SB_OFT_ADDR_MASK;
+	addr |= SBSDIO_SB_ACCESS_2_4B_FLAG;
+
 	if (pktq->qlen == 1 || !sdiodev->sg_support) {
 		skb_queue_walk(pktq, skb) {
 			err = brcmf_sdiod_buff_write(sdiodev, SDIO_FUNC_2,
@@ -671,7 +679,7 @@ brcmf_sdiod_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address,
 	/* Do the transfer(s) */
 	while (size) {
 		/* Set the backplane window to include the start address */
-		err = brcmf_sdiod_set_sbaddr_window(sdiodev, address);
+		err = brcmf_sdiod_set_backplane_window(sdiodev, address);
 		if (err)
 			break;
 
@@ -714,7 +722,7 @@ brcmf_sdiod_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address,
 	dev_kfree_skb(pkt);
 
 	/* Return the window to backplane enumeration space for core access */
-	if (brcmf_sdiod_set_sbaddr_window(sdiodev, sdiodev->sbwad))
+	if (brcmf_sdiod_set_backplane_window(sdiodev, sdiodev->sbwad))
 		brcmf_err("FAILED to set window back to 0x%x\n",
 			  sdiodev->sbwad);
 
-- 
2.11.0

[PATCH 17/30] brcmfamc: remove unnecessary call to brcmf_sdiod_set_backplane_window()

[Ian Molton]

All functions that might require the window address changing call
brcmf_sdiod_set_backplane_window() prior to access. Thus resetting
the window is not required.

Signed-off-by: Ian Molton <ian@mnementh.co.uk>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
index 0d37c68637f2..cabfab9a02a2 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
@@ -721,11 +721,6 @@ brcmf_sdiod_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address,
 
 	dev_kfree_skb(pkt);
 
-	/* Return the window to backplane enumeration space for core access */
-	if (brcmf_sdiod_set_backplane_window(sdiodev, sdiodev->sbwad))
-		brcmf_err("FAILED to set window back to 0x%x\n",
-			  sdiodev->sbwad);
-
 	sdio_release_host(sdiodev->func[1]);
 
 	return err;
-- 
2.11.0

[PATCH 18/30] brcmfmac: Cleanup offsetof()

[Ian Molton]

Create a macro to make the code a bit more readable, whilst we're stuck
with using struct element offsets as register offsets.


Signed-off-by: Ian Molton <ian@mnementh.co.uk>
---
 .../wireless/broadcom/brcm80211/brcmfmac/sdio.c    | 35 +++++++++-------------
 1 file changed, 14 insertions(+), 21 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
index ce19ccf5d1d6..8f3e99da871a 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
@@ -161,6 +161,8 @@ struct rte_console {
 
 #define CORE_BUS_REG(base, field) \
 		(base + offsetof(struct sdpcmd_regs, field))
+#define __sd_reg(field) \
+		(offsetof(struct sdpcmd_regs, field))
 
 /* SDIO function 1 register CHIPCLKCSR */
 /* Force ALP request to backplane */
@@ -1084,12 +1086,10 @@ static u32 brcmf_sdio_hostmail(struct brcmf_sdio *bus)
 	brcmf_dbg(SDIO, "Enter\n");
 
 	/* Read mailbox data and ack that we did so */
-	ret = r_sdreg32(bus, &hmb_data,
-			offsetof(struct sdpcmd_regs, tohostmailboxdata));
+	ret = r_sdreg32(bus, &hmb_data,	__sd_reg(tohostmailboxdata));
 
 	if (ret == 0)
-		w_sdreg32(bus, SMB_INT_ACK,
-			  offsetof(struct sdpcmd_regs, tosbmailbox));
+		w_sdreg32(bus, SMB_INT_ACK, __sd_reg(tosbmailbox));
 	bus->sdcnt.f1regdata += 2;
 
 	/* Dongle recomposed rx frames, accept them again */
@@ -1197,8 +1197,7 @@ static void brcmf_sdio_rxfail(struct brcmf_sdio *bus, bool abort, bool rtx)
 
 	if (rtx) {
 		bus->sdcnt.rxrtx++;
-		err = w_sdreg32(bus, SMB_NAK,
-				offsetof(struct sdpcmd_regs, tosbmailbox));
+		err = w_sdreg32(bus, SMB_NAK, __sd_reg(tosbmailbox));
 
 		bus->sdcnt.f1regdata++;
 		if (err == 0)
@@ -2323,9 +2322,7 @@ static uint brcmf_sdio_sendfromq(struct brcmf_sdio *bus, uint maxframes)
 		if (!bus->intr) {
 			/* Check device status, signal pending interrupt */
 			sdio_claim_host(bus->sdiodev->func[1]);
-			ret = r_sdreg32(bus, &intstatus,
-					offsetof(struct sdpcmd_regs,
-						 intstatus));
+			ret = r_sdreg32(bus, &intstatus, __sd_reg(intstatus));
 			sdio_release_host(bus->sdiodev->func[1]);
 			bus->sdcnt.f2txdata++;
 			if (ret != 0)
@@ -2431,7 +2428,7 @@ static void brcmf_sdio_bus_stop(struct device *dev)
 		brcmf_sdio_bus_sleep(bus, false, false);
 
 		/* Disable and clear interrupts at the chip level also */
-		w_sdreg32(bus, 0, offsetof(struct sdpcmd_regs, hostintmask));
+		w_sdreg32(bus, 0, __sd_reg(hostintmask));
 		local_hostintmask = bus->hostintmask;
 		bus->hostintmask = 0;
 
@@ -2450,8 +2447,7 @@ static void brcmf_sdio_bus_stop(struct device *dev)
 		sdio_disable_func(sdiodev->func[SDIO_FUNC_2]);
 
 		/* Clear any pending interrupts now that F2 is disabled */
-		w_sdreg32(bus, local_hostintmask,
-			  offsetof(struct sdpcmd_regs, intstatus));
+		w_sdreg32(bus, local_hostintmask, __sd_reg(intstatus));
 
 		sdio_release_host(sdiodev->func[1]);
 	}
@@ -2497,7 +2493,7 @@ static int brcmf_sdio_intr_rstatus(struct brcmf_sdio *bus)
 	int ret;
 
 	buscore = brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV);
-	addr = buscore->base + offsetof(struct sdpcmd_regs, intstatus);
+	addr = buscore->base + __sd_reg(intstatus);
 
 	val = brcmf_sdiod_readl(bus->sdiodev, addr, &ret);
 	bus->sdcnt.f1regdata++;
@@ -2574,11 +2570,9 @@ static void brcmf_sdio_dpc(struct brcmf_sdio *bus)
 	 */
 	if (intstatus & I_HMB_FC_CHANGE) {
 		intstatus &= ~I_HMB_FC_CHANGE;
-		err = w_sdreg32(bus, I_HMB_FC_CHANGE,
-				offsetof(struct sdpcmd_regs, intstatus));
+		err = w_sdreg32(bus, I_HMB_FC_CHANGE, __sd_reg(intstatus));
 
-		err = r_sdreg32(bus, &newstatus,
-				offsetof(struct sdpcmd_regs, intstatus));
+		err = r_sdreg32(bus, &newstatus, __sd_reg(intstatus));
 		bus->sdcnt.f1regdata += 2;
 		atomic_set(&bus->fcstate,
 			   !!(newstatus & (I_HMB_FC_STATE | I_HMB_FC_CHANGE)));
@@ -3760,7 +3754,7 @@ static void brcmf_sdio_buscore_activate(void *ctx, struct brcmf_chip *chip,
 
 	/* clear all interrupts */
 	core = brcmf_chip_get_core(chip, BCMA_CORE_SDIO_DEV);
-	reg_addr = core->base + offsetof(struct sdpcmd_regs, intstatus);
+	reg_addr = core->base + __sd_reg(intstatus);
 	brcmf_sdiod_writel(sdiodev, reg_addr, 0xFFFFFFFF, NULL);
 
 	if (rstvec)
@@ -4037,7 +4031,7 @@ static void brcmf_sdio_firmware_callback(struct device *dev, int err,
 
 	/* Enable function 2 (frame transfers) */
 	w_sdreg32(bus, SDPCM_PROT_VERSION << SMB_DATA_VERSION_SHIFT,
-		  offsetof(struct sdpcmd_regs, tosbmailboxdata));
+		  __sd_reg(tosbmailboxdata));
 	err = sdio_enable_func(sdiodev->func[SDIO_FUNC_2]);
 
 
@@ -4047,8 +4041,7 @@ static void brcmf_sdio_firmware_callback(struct device *dev, int err,
 	if (!err) {
 		/* Set up the interrupt mask and enable interrupts */
 		bus->hostintmask = HOSTINTMASK;
-		w_sdreg32(bus, bus->hostintmask,
-			  offsetof(struct sdpcmd_regs, hostintmask));
+		w_sdreg32(bus, bus->hostintmask, __sd_reg(hostintmask));
 
 		brcmf_sdiod_writeb(sdiodev, SBSDIO_WATERMARK, 8, &err);
 	} else {
-- 
2.11.0

[PATCH 19/30] brcmfmac: Remove unused macro.

[Ian Molton]

This macro is used exactly nowhere in the code. Delete it.

Signed-off-by: Ian Molton <ian@mnementh.co.uk>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
index 8f3e99da871a..b095bb66fe96 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
@@ -159,8 +159,6 @@ struct rte_console {
 /* manfid tuple length, include tuple, link bytes */
 #define SBSDIO_CIS_MANFID_TUPLE_LEN	6
 
-#define CORE_BUS_REG(base, field) \
-		(base + offsetof(struct sdpcmd_regs, field))
 #define __sd_reg(field) \
 		(offsetof(struct sdpcmd_regs, field))
 
-- 
2.11.0

[PATCH 20/30] brcmfmac: Remove repeated calls to brcmf_chip_get_core()

[Ian Molton]

There is no need to repeatdly call brcmf_chip_get_core(), which
traverses a list of cores every time its called (including during
register access code!).

Call it once, and store a pointer to the core structure. The existing
code does nto keep track of users of the cores anyway, and even so, this
will allow for easier refcounting in future.

Signed-off-by: Ian Molton <ian@mnementh.co.uk>
---
 .../wireless/broadcom/brcm80211/brcmfmac/sdio.c    | 25 +++++++++++++---------
 1 file changed, 15 insertions(+), 10 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
index b095bb66fe96..289ff61b7bf8 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
@@ -435,6 +435,7 @@ struct brcmf_sdio_count {
 struct brcmf_sdio {
 	struct brcmf_sdio_dev *sdiodev;	/* sdio device handler */
 	struct brcmf_chip *ci;	/* Chip info struct */
+	struct brcmf_core *sdio_core; /* sdio core info struct */
 
 	u32 hostintmask;	/* Copy of Host Interrupt Mask */
 	atomic_t intstatus;	/* Intstatus bits (events) pending */
@@ -662,10 +663,9 @@ static bool data_ok(struct brcmf_sdio *bus)
  */
 static int r_sdreg32(struct brcmf_sdio *bus, u32 *regvar, u32 offset)
 {
-	struct brcmf_core *core;
+	struct brcmf_core *core = bus->sdio_core;
 	int ret;
 
-	core = brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV);
 	*regvar = brcmf_sdiod_readl(bus->sdiodev, core->base + offset, &ret);
 
 	return ret;
@@ -673,10 +673,9 @@ static int r_sdreg32(struct brcmf_sdio *bus, u32 *regvar, u32 offset)
 
 static int w_sdreg32(struct brcmf_sdio *bus, u32 regval, u32 reg_offset)
 {
-	struct brcmf_core *core;
+	struct brcmf_core *core = bus->sdio_core;
 	int ret;
 
-	core = brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV);
 	brcmf_sdiod_writel(bus->sdiodev, core->base + reg_offset, regval, &ret);
 
 	return ret;
@@ -2485,12 +2484,11 @@ static inline void brcmf_sdio_clrintr(struct brcmf_sdio *bus)
 
 static int brcmf_sdio_intr_rstatus(struct brcmf_sdio *bus)
 {
-	struct brcmf_core *buscore;
+	struct brcmf_core *buscore = bus->sdio_core;
 	u32 addr;
 	unsigned long val;
 	int ret;
 
-	buscore = brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV);
 	addr = buscore->base + __sd_reg(intstatus);
 
 	val = brcmf_sdiod_readl(bus->sdiodev, addr, &ret);
@@ -3367,13 +3365,14 @@ static void brcmf_sdio_sr_init(struct brcmf_sdio *bus)
 /* enable KSO bit */
 static int brcmf_sdio_kso_init(struct brcmf_sdio *bus)
 {
+	struct brcmf_core *core = bus->sdio_core;
 	u8 val;
 	int err = 0;
 
 	brcmf_dbg(TRACE, "Enter\n");
 
 	/* KSO bit added in SDIO core rev 12 */
-	if (brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV)->rev < 12)
+	if (core->rev < 12)
 		return 0;
 
 	val = brcmf_sdiod_readb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, &err);
@@ -3401,6 +3400,7 @@ static int brcmf_sdio_bus_preinit(struct device *dev)
 	struct brcmf_bus *bus_if = dev_get_drvdata(dev);
 	struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
 	struct brcmf_sdio *bus = sdiodev->bus;
+	struct brcmf_core *core = bus->sdio_core;
 	uint pad_size;
 	u32 value;
 	int err;
@@ -3409,7 +3409,7 @@ static int brcmf_sdio_bus_preinit(struct device *dev)
 	 * a device perspective, ie. bus:txglom affects the
 	 * bus transfers from device to host.
 	 */
-	if (brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV)->rev < 12) {
+	if (core->rev < 12) {
 		/* for sdio core rev < 12, disable txgloming */
 		value = 0;
 		err = brcmf_iovar_data_set(dev, "bus:txglom", &value,
@@ -3747,11 +3747,10 @@ static void brcmf_sdio_buscore_activate(void *ctx, struct brcmf_chip *chip,
 					u32 rstvec)
 {
 	struct brcmf_sdio_dev *sdiodev = ctx;
-	struct brcmf_core *core;
+	struct brcmf_core *core = sdiodev->bus->sdio_core;
 	u32 reg_addr;
 
 	/* clear all interrupts */
-	core = brcmf_chip_get_core(chip, BCMA_CORE_SDIO_DEV);
 	reg_addr = core->base + __sd_reg(intstatus);
 	brcmf_sdiod_writel(sdiodev, reg_addr, 0xFFFFFFFF, NULL);
 
@@ -3832,6 +3831,12 @@ brcmf_sdio_probe_attach(struct brcmf_sdio *bus)
 		bus->ci = NULL;
 		goto fail;
 	}
+
+	/* Pick up the SDIO core info struct from chip.c */
+	bus->sdio_core   = brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV);
+	if (!bus->sdio_core)
+		goto fail;
+
 	sdiodev->settings = brcmf_get_module_param(sdiodev->dev,
 						   BRCMF_BUSTYPE_SDIO,
 						   bus->ci->chip,
-- 
2.11.0

[PATCH 21/30] brcmfmac: Remove {r,w}_sdreg32

[Ian Molton]

Remove yet another IO function from the code and replace with one
that already exists.

Signed-off-by: Ian Molton <ian@mnementh.co.uk>
---
 .../wireless/broadcom/brcm80211/brcmfmac/sdio.c    | 91 +++++++++++-----------
 1 file changed, 45 insertions(+), 46 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
index 289ff61b7bf8..c1f3366871e5 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
@@ -657,30 +657,6 @@ static bool data_ok(struct brcmf_sdio *bus)
 	       ((u8)(bus->tx_max - bus->tx_seq) & 0x80) == 0;
 }
 
-/*
- * Reads a register in the SDIO hardware block. This block occupies a series of
- * adresses on the 32 bit backplane bus.
- */
-static int r_sdreg32(struct brcmf_sdio *bus, u32 *regvar, u32 offset)
-{
-	struct brcmf_core *core = bus->sdio_core;
-	int ret;
-
-	*regvar = brcmf_sdiod_readl(bus->sdiodev, core->base + offset, &ret);
-
-	return ret;
-}
-
-static int w_sdreg32(struct brcmf_sdio *bus, u32 regval, u32 reg_offset)
-{
-	struct brcmf_core *core = bus->sdio_core;
-	int ret;
-
-	brcmf_sdiod_writel(bus->sdiodev, core->base + reg_offset, regval, &ret);
-
-	return ret;
-}
-
 static int
 brcmf_sdio_kso_control(struct brcmf_sdio *bus, bool on)
 {
@@ -1075,6 +1051,8 @@ static void brcmf_sdio_get_console_addr(struct brcmf_sdio *bus)
 
 static u32 brcmf_sdio_hostmail(struct brcmf_sdio *bus)
 {
+	struct brcmf_sdio_dev *sdiod = bus->sdiodev;
+	struct brcmf_core *core = bus->sdio_core;
 	u32 intstatus = 0;
 	u32 hmb_data;
 	u8 fcbits;
@@ -1083,10 +1061,13 @@ static u32 brcmf_sdio_hostmail(struct brcmf_sdio *bus)
 	brcmf_dbg(SDIO, "Enter\n");
 
 	/* Read mailbox data and ack that we did so */
-	ret = r_sdreg32(bus, &hmb_data,	__sd_reg(tohostmailboxdata));
+	hmb_data = brcmf_sdiod_readl(sdiod, core->base +
+					__sd_reg(tohostmailboxdata), &ret);
+
+	if (!ret)
+		brcmf_sdiod_writel(sdiod, core->base + __sd_reg(tosbmailbox),
+				   SMB_INT_ACK, &ret);
 
-	if (ret == 0)
-		w_sdreg32(bus, SMB_INT_ACK, __sd_reg(tosbmailbox));
 	bus->sdcnt.f1regdata += 2;
 
 	/* Dongle recomposed rx frames, accept them again */
@@ -1155,6 +1136,8 @@ static u32 brcmf_sdio_hostmail(struct brcmf_sdio *bus)
 
 static void brcmf_sdio_rxfail(struct brcmf_sdio *bus, bool abort, bool rtx)
 {
+	struct brcmf_sdio_dev *sdiod = bus->sdiodev;
+	struct brcmf_core *core = bus->sdio_core;
 	uint retries = 0;
 	u16 lastrbc;
 	u8 hi, lo;
@@ -1194,7 +1177,8 @@ static void brcmf_sdio_rxfail(struct brcmf_sdio *bus, bool abort, bool rtx)
 
 	if (rtx) {
 		bus->sdcnt.rxrtx++;
-		err = w_sdreg32(bus, SMB_NAK, __sd_reg(tosbmailbox));
+		brcmf_sdiod_writel(sdiod, core->base + __sd_reg(tosbmailbox),
+				   SMB_NAK, &err);
 
 		bus->sdcnt.f1regdata++;
 		if (err == 0)
@@ -2279,6 +2263,7 @@ static int brcmf_sdio_txpkt(struct brcmf_sdio *bus, struct sk_buff_head *pktq,
 
 static uint brcmf_sdio_sendfromq(struct brcmf_sdio *bus, uint maxframes)
 {
+	struct brcmf_core *core = bus->sdio_core;
 	struct sk_buff *pkt;
 	struct sk_buff_head pktq;
 	u32 intstatus = 0;
@@ -2319,7 +2304,9 @@ static uint brcmf_sdio_sendfromq(struct brcmf_sdio *bus, uint maxframes)
 		if (!bus->intr) {
 			/* Check device status, signal pending interrupt */
 			sdio_claim_host(bus->sdiodev->func[1]);
-			ret = r_sdreg32(bus, &intstatus, __sd_reg(intstatus));
+			intstatus = brcmf_sdiod_readl(bus->sdiodev, core->base +
+						      __sd_reg(intstatus),
+						      &ret);
 			sdio_release_host(bus->sdiodev->func[1]);
 			bus->sdcnt.f2txdata++;
 			if (ret != 0)
@@ -2403,12 +2390,13 @@ static int brcmf_sdio_tx_ctrlframe(struct brcmf_sdio *bus, u8 *frame, u16 len)
 
 static void brcmf_sdio_bus_stop(struct device *dev)
 {
-	u32 local_hostintmask;
-	u8 saveclk;
-	int err;
 	struct brcmf_bus *bus_if = dev_get_drvdata(dev);
 	struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
 	struct brcmf_sdio *bus = sdiodev->bus;
+	struct brcmf_core *core = bus->sdio_core;
+	u32 local_hostintmask;
+	u8 saveclk;
+	int err;
 
 	brcmf_dbg(TRACE, "Enter\n");
 
@@ -2425,7 +2413,9 @@ static void brcmf_sdio_bus_stop(struct device *dev)
 		brcmf_sdio_bus_sleep(bus, false, false);
 
 		/* Disable and clear interrupts at the chip level also */
-		w_sdreg32(bus, 0, __sd_reg(hostintmask));
+		brcmf_sdiod_writel(sdiodev, core->base + __sd_reg(hostintmask),
+				   0, NULL);
+
 		local_hostintmask = bus->hostintmask;
 		bus->hostintmask = 0;
 
@@ -2444,7 +2434,8 @@ static void brcmf_sdio_bus_stop(struct device *dev)
 		sdio_disable_func(sdiodev->func[SDIO_FUNC_2]);
 
 		/* Clear any pending interrupts now that F2 is disabled */
-		w_sdreg32(bus, local_hostintmask, __sd_reg(intstatus));
+		brcmf_sdiod_writel(sdiodev, core->base + __sd_reg(intstatus),
+				   local_hostintmask, NULL);
 
 		sdio_release_host(sdiodev->func[1]);
 	}
@@ -2511,6 +2502,8 @@ static int brcmf_sdio_intr_rstatus(struct brcmf_sdio *bus)
 
 static void brcmf_sdio_dpc(struct brcmf_sdio *bus)
 {
+	struct brcmf_core *core = bus->sdio_core;
+	struct brcmf_sdio_dev *sdiod = bus->sdiodev;
 	u32 newstatus = 0;
 	unsigned long intstatus;
 	uint txlimit = bus->txbound;	/* Tx frames to send before resched */
@@ -2566,9 +2559,13 @@ static void brcmf_sdio_dpc(struct brcmf_sdio *bus)
 	 */
 	if (intstatus & I_HMB_FC_CHANGE) {
 		intstatus &= ~I_HMB_FC_CHANGE;
-		err = w_sdreg32(bus, I_HMB_FC_CHANGE, __sd_reg(intstatus));
+		brcmf_sdiod_writel(sdiod, core->base + __sd_reg(intstatus),
+				   I_HMB_FC_CHANGE, &err);
+
+		newstatus = brcmf_sdiod_readl(sdiod,
+					      core->base + __sd_reg(intstatus),
+					      &err);
 
-		err = r_sdreg32(bus, &newstatus, __sd_reg(intstatus));
 		bus->sdcnt.f1regdata += 2;
 		atomic_set(&bus->fcstate,
 			   !!(newstatus & (I_HMB_FC_STATE | I_HMB_FC_CHANGE)));
@@ -3987,22 +3984,21 @@ static void brcmf_sdio_firmware_callback(struct device *dev, int err,
 					 const struct firmware *code,
 					 void *nvram, u32 nvram_len)
 {
-	struct brcmf_bus *bus_if;
-	struct brcmf_sdio_dev *sdiodev;
-	struct brcmf_sdio *bus;
+	struct brcmf_bus *bus_if = dev_get_drvdata(dev);
+	struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
+	struct brcmf_sdio *bus = sdiodev->bus;
+	struct brcmf_sdio_dev *sdiod = bus->sdiodev;
+	struct brcmf_core *core = bus->sdio_core;
 	u8 saveclk;
 
 	brcmf_dbg(TRACE, "Enter: dev=%s, err=%d\n", dev_name(dev), err);
-	bus_if = dev_get_drvdata(dev);
-	sdiodev = bus_if->bus_priv.sdio;
+
 	if (err)
 		goto fail;
 
 	if (!bus_if->drvr)
 		return;
 
-	bus = sdiodev->bus;
-
 	/* try to download image and nvram to the dongle */
 	bus->alp_only = true;
 	err = brcmf_sdio_download_firmware(bus, code, nvram, nvram_len);
@@ -4033,8 +4029,9 @@ static void brcmf_sdio_firmware_callback(struct device *dev, int err,
 	}
 
 	/* Enable function 2 (frame transfers) */
-	w_sdreg32(bus, SDPCM_PROT_VERSION << SMB_DATA_VERSION_SHIFT,
-		  __sd_reg(tosbmailboxdata));
+	brcmf_sdiod_writel(sdiod, core->base + __sd_reg(tosbmailboxdata),
+			   SDPCM_PROT_VERSION << SMB_DATA_VERSION_SHIFT, NULL);
+
 	err = sdio_enable_func(sdiodev->func[SDIO_FUNC_2]);
 
 
@@ -4044,7 +4041,9 @@ static void brcmf_sdio_firmware_callback(struct device *dev, int err,
 	if (!err) {
 		/* Set up the interrupt mask and enable interrupts */
 		bus->hostintmask = HOSTINTMASK;
-		w_sdreg32(bus, bus->hostintmask, __sd_reg(hostintmask));
+		brcmf_sdiod_writel(sdiod, core->base + __sd_reg(hostintmask),
+				   bus->hostintmask, NULL);
+
 
 		brcmf_sdiod_writeb(sdiodev, SBSDIO_WATERMARK, 8, &err);
 	} else {
-- 
2.11.0

[PATCH 22/30] brcmfmac: Rename buscore->core for consistency

[Ian Molton]

Avoid confusion with unrelated _buscore labels.

Signed-off-by: Ian Molton <ian@mnementh.co.uk>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
index c1f3366871e5..09b4db117e0d 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
@@ -2475,14 +2475,12 @@ static inline void brcmf_sdio_clrintr(struct brcmf_sdio *bus)
 
 static int brcmf_sdio_intr_rstatus(struct brcmf_sdio *bus)
 {
-	struct brcmf_core *buscore = bus->sdio_core;
-	u32 addr;
+	struct brcmf_core *core = bus->sdio_core;
 	unsigned long val;
 	int ret;
 
-	addr = buscore->base + __sd_reg(intstatus);
-
-	val = brcmf_sdiod_readl(bus->sdiodev, addr, &ret);
+	val = brcmf_sdiod_readl(bus->sdiodev, core->base + __sd_reg(intstatus),
+				&ret);
 	bus->sdcnt.f1regdata++;
 	if (ret != 0)
 		return ret;
@@ -2492,7 +2490,8 @@ static int brcmf_sdio_intr_rstatus(struct brcmf_sdio *bus)
 
 	/* Clear interrupts */
 	if (val) {
-		brcmf_sdiod_writel(bus->sdiodev, addr, val, &ret);
+		brcmf_sdiod_writel(bus->sdiodev,
+				   core->base + __sd_reg(intstatus), val, &ret);
 		bus->sdcnt.f1regdata++;
 		atomic_or(val, &bus->intstatus);
 	}
-- 
2.11.0

[PATCH 23/30] brcmfmac: stabilise the value of ->sbwad in use for some xfer routines.

[Ian Molton]

The IO functions operate within the Chipcommon IO window. Explicitly
set this, rather than relying on the last initialisation IO access to
leave it set to the right value by chance.

Signed-off-by: Ian Molton <ian@mnementh.co.uk>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c | 8 ++++----
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c   | 5 +++++
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h   | 1 +
 3 files changed, 10 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
index cabfab9a02a2..eeddefeef9b9 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
@@ -527,7 +527,7 @@ int brcmf_sdiod_recv_buf(struct brcmf_sdio_dev *sdiodev, u8 *buf, uint nbytes)
 
 int brcmf_sdiod_recv_pkt(struct brcmf_sdio_dev *sdiodev, struct sk_buff *pkt)
 {
-	u32 addr = sdiodev->sbwad;
+	u32 addr = sdiodev->cc_core->base;
 	int err = 0;
 
 	brcmf_dbg(SDIO, "addr = 0x%x, size = %d\n", addr, pkt->len);
@@ -550,7 +550,7 @@ int brcmf_sdiod_recv_chain(struct brcmf_sdio_dev *sdiodev,
 {
 	struct sk_buff *glom_skb = NULL;
 	struct sk_buff *skb;
-	u32 addr = sdiodev->sbwad;
+	u32 addr = sdiodev->cc_core->base;
 	int err = 0;
 
 	brcmf_dbg(SDIO, "addr = 0x%x, size = %d\n",
@@ -591,7 +591,7 @@ int brcmf_sdiod_recv_chain(struct brcmf_sdio_dev *sdiodev,
 int brcmf_sdiod_send_buf(struct brcmf_sdio_dev *sdiodev, u8 *buf, uint nbytes)
 {
 	struct sk_buff *mypkt;
-	u32 addr = sdiodev->sbwad;
+	u32 addr = sdiodev->cc_core->base;
 	int err;
 
 	mypkt = brcmu_pkt_buf_get_skb(nbytes);
@@ -623,7 +623,7 @@ int brcmf_sdiod_send_pkt(struct brcmf_sdio_dev *sdiodev,
 			 struct sk_buff_head *pktq)
 {
 	struct sk_buff *skb;
-	u32 addr = sdiodev->sbwad;
+	u32 addr = sdiodev->cc_core->base;
 	int err;
 
 	brcmf_dbg(SDIO, "addr = 0x%x, size = %d\n", addr, pktq->qlen);
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
index 09b4db117e0d..62561782ab90 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
@@ -3833,6 +3833,11 @@ brcmf_sdio_probe_attach(struct brcmf_sdio *bus)
 	if (!bus->sdio_core)
 		goto fail;
 
+	/* Pick up the CHIPCOMMON core info struct, for bulk IO in bcmsdh.c */
+	sdiodev->cc_core = brcmf_chip_get_core(bus->ci, BCMA_CORE_CHIPCOMMON);
+	if (!sdiodev->cc_core)
+		goto fail;
+
 	sdiodev->settings = brcmf_get_module_param(sdiodev->dev,
 						   BRCMF_BUSTYPE_SDIO,
 						   bus->ci->chip,
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
index 01def16cd236..ac5f814ff019 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
@@ -178,6 +178,7 @@ struct brcmf_sdio_dev {
 	struct sdio_func *func[SDIO_MAX_FUNCS];
 	u8 num_funcs;			/* Supported funcs on client */
 	u32 sbwad;			/* Save backplane window address */
+	struct brcmf_core *cc_core;	/* chipcommon core info struct */
 	struct brcmf_sdio *bus;
 	struct device *dev;
 	struct brcmf_bus *bus_if;
-- 
2.11.0

[PATCH 24/30] brcmfmac: Correctly handle accesses to SDIO func0

[Ian Molton]

Rather than workaround the restrictions on func0 addressing in the
driver, set MMC_QUIRK_LENIENT_FN0

Signed-off-by: Ian Molton <ian@mnementh.co.uk>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c | 4 ++++
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h   | 4 ++--
 2 files changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
index eeddefeef9b9..5fa77f8c0abb 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
@@ -992,6 +992,10 @@ static int brcmf_ops_sdio_probe(struct sdio_func *func,
 	brcmf_dbg(SDIO, "Function#: %d\n", func->num);
 
 	dev = &func->dev;
+
+	/* Set MMC_QUIRK_LENIENT_FN0 for this card */
+	func->card->quirks |= MMC_QUIRK_LENIENT_FN0;
+
 	/* prohibit ACPI power management for this device */
 	brcmf_sdiod_acpi_set_power_manageable(dev, 0);
 
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
index ac5f814ff019..d113c7d814b6 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
@@ -297,10 +297,10 @@ void brcmf_sdiod_intr_unregister(struct brcmf_sdio_dev *sdiodev);
 /* SDIO device register access interface */
 /* Accessors for SDIO Function 0 */
 #define brcmf_sdiod_func0_rb(sdiodev, addr, r) \
-	sdio_readb((sdiodev)->func[0], (addr), (r))
+	sdio_f0_readb((sdiodev)->func[0], (addr), (r))
 
 #define brcmf_sdiod_func0_wb(sdiodev, addr, v, ret) \
-	sdio_writeb((sdiodev)->func[0], (v), (addr), (ret))
+	sdio_f0_writeb((sdiodev)->func[0], (v), (addr), (ret))
 
 /* Accessors for SDIO Function 1 */
 #define brcmf_sdiod_readb(sdiodev, addr, r) \
-- 
2.11.0

[PATCH 25/30] brcmfmac: Remove func0 from function array

[Ian Molton]

Linux doesnt pass you func0 as a function when probing - instead
providing specific access functions to read/write it.

This prepares for a patch to remove the actual array entry itself.

Signed-off-by: Ian Molton <ian@mnementh.co.uk>

# Conflicts:
#	drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c |  5 +----
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c   | 10 +++++++---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h   | 13 ++++++-------
 3 files changed, 14 insertions(+), 14 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
index 5fa77f8c0abb..69a6699126fd 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
@@ -1019,8 +1019,7 @@ static int brcmf_ops_sdio_probe(struct sdio_func *func,
 	/* store refs to functions used. mmc_card does
 	 * not hold the F0 function pointer.
 	 */
-	sdiodev->func[0] = kmemdup(func, sizeof(*func), GFP_KERNEL);
-	sdiodev->func[0]->num = 0;
+	sdiodev->func[0] = NULL;
 	sdiodev->func[1] = func->card->sdio_func[0];
 	sdiodev->func[2] = func;
 
@@ -1046,7 +1045,6 @@ static int brcmf_ops_sdio_probe(struct sdio_func *func,
 fail:
 	dev_set_drvdata(&func->dev, NULL);
 	dev_set_drvdata(&sdiodev->func[1]->dev, NULL);
-	kfree(sdiodev->func[0]);
 	kfree(sdiodev);
 	kfree(bus_if);
 	return err;
@@ -1079,7 +1077,6 @@ static void brcmf_ops_sdio_remove(struct sdio_func *func)
 		dev_set_drvdata(&sdiodev->func[2]->dev, NULL);
 
 		kfree(bus_if);
-		kfree(sdiodev->func[0]);
 		kfree(sdiodev);
 	}
 
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
index 62561782ab90..7ebe6460cb5c 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
@@ -3762,9 +3762,13 @@ static u32 brcmf_sdio_buscore_read32(void *ctx, u32 addr)
 	u32 val, rev;
 
 	val = brcmf_sdiod_readl(sdiodev, addr, NULL);
-	if ((sdiodev->func[0]->device == SDIO_DEVICE_ID_BROADCOM_4335_4339 ||
-	     sdiodev->func[0]->device == SDIO_DEVICE_ID_BROADCOM_4339) &&
-	    addr == CORE_CC_REG(SI_ENUM_BASE, chipid)) {
+
+	/* Force 4339 chips over rev2 to use the same ID */
+	/* This is borderline tolerable whilst there is only two exceptions */
+	/* But could be handled better */
+	if ((sdiodev->func[1]->device == SDIO_DEVICE_ID_BROADCOM_4335_4339 ||
+	     sdiodev->func[1]->device == SDIO_DEVICE_ID_BROADCOM_4339) &&
+	     addr == CORE_CC_REG(SI_ENUM_BASE, chipid)) {
 		rev = (val & CID_REV_MASK) >> CID_REV_SHIFT;
 		if (rev >= 2) {
 			val &= ~CID_ID_MASK;
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
index d113c7d814b6..6e2fc065b8a7 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
@@ -21,7 +21,9 @@
 #include <linux/firmware.h>
 #include "firmware.h"
 
-#define SDIO_FUNC_0		0
+/* Maximum number of I/O funcs */
+#define NUM_SDIO_FUNCS	3
+
 #define SDIO_FUNC_1		1
 #define SDIO_FUNC_2		2
 
@@ -39,9 +41,6 @@
 #define INTR_STATUS_FUNC1	0x2
 #define INTR_STATUS_FUNC2	0x4
 
-/* Maximum number of I/O funcs */
-#define SDIOD_MAX_IOFUNCS	7
-
 /* mask of register map */
 #define REG_F0_REG_MASK		0x7FF
 #define REG_F1_MISC_MASK	0x1FFFF
@@ -175,7 +174,7 @@ struct brcmf_sdio;
 struct brcmf_sdiod_freezer;
 
 struct brcmf_sdio_dev {
-	struct sdio_func *func[SDIO_MAX_FUNCS];
+	struct sdio_func *func[NUM_SDIO_FUNCS];
 	u8 num_funcs;			/* Supported funcs on client */
 	u32 sbwad;			/* Save backplane window address */
 	struct brcmf_core *cc_core;	/* chipcommon core info struct */
@@ -297,10 +296,10 @@ void brcmf_sdiod_intr_unregister(struct brcmf_sdio_dev *sdiodev);
 /* SDIO device register access interface */
 /* Accessors for SDIO Function 0 */
 #define brcmf_sdiod_func0_rb(sdiodev, addr, r) \
-	sdio_f0_readb((sdiodev)->func[0], (addr), (r))
+	sdio_f0_readb((sdiodev)->func[1], (addr), (r))
 
 #define brcmf_sdiod_func0_wb(sdiodev, addr, v, ret) \
-	sdio_f0_writeb((sdiodev)->func[0], (v), (addr), (ret))
+	sdio_f0_writeb((sdiodev)->func[1], (v), (addr), (ret))
 
 /* Accessors for SDIO Function 1 */
 #define brcmf_sdiod_readb(sdiodev, addr, r) \
-- 
2.11.0

[PATCH 26/30] brcmfmac: More efficient and slightly easier to read fixup for 4339 chips

[Ian Molton]

Its more efficient to test the register we're interested in first,
potentially avoiding two more comparisons, and therefore always avoiding
one comparison per call on all other chips.

Signed-off-by: Ian Molton <ian@mnementh.co.uk>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
index 7ebe6460cb5c..8a730133db77 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
@@ -3766,15 +3766,18 @@ static u32 brcmf_sdio_buscore_read32(void *ctx, u32 addr)
 	/* Force 4339 chips over rev2 to use the same ID */
 	/* This is borderline tolerable whilst there is only two exceptions */
 	/* But could be handled better */
-	if ((sdiodev->func[1]->device == SDIO_DEVICE_ID_BROADCOM_4335_4339 ||
-	     sdiodev->func[1]->device == SDIO_DEVICE_ID_BROADCOM_4339) &&
-	     addr == CORE_CC_REG(SI_ENUM_BASE, chipid)) {
+	if (addr == CORE_CC_REG(SI_ENUM_BASE, chipid) && 
+	    (sdiodev->func[1]->device == SDIO_DEVICE_ID_BROADCOM_4339 ||
+	     sdiodev->func[1]->device == SDIO_DEVICE_ID_BROADCOM_4335_4339)) {
+
 		rev = (val & CID_REV_MASK) >> CID_REV_SHIFT;
+
 		if (rev >= 2) {
 			val &= ~CID_ID_MASK;
 			val |= BRCM_CC_4339_CHIP_ID;
 		}
 	}
+
 	return val;
 }
 
-- 
2.11.0

[PATCH 27/30] brcmfmac: Replace function index with function pointer

[Ian Molton]

In preparation for removing the function array, remove all code that
refers to function by index and replace with pointers to the function
itself.

Signed-off-by: Ian Molton <ian@mnementh.co.uk>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>

# Conflicts:
#	drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
---
 .../wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c  | 83 ++++++++++++----------
 .../wireless/broadcom/brcm80211/brcmfmac/sdio.c    | 15 ++--
 .../wireless/broadcom/brcm80211/brcmfmac/sdio.h    |  6 +-
 3 files changed, 54 insertions(+), 50 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
index 69a6699126fd..0cd081d732f9 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
@@ -289,8 +289,9 @@ void brcmf_sdiod_writel(struct brcmf_sdio_dev *sdiodev, u32 addr,
 		*ret = retval;
 }
 
-static int brcmf_sdiod_buff_read(struct brcmf_sdio_dev *sdiodev, uint fn,
-				 u32 addr, struct sk_buff *pkt)
+static int brcmf_sdiod_buff_read(struct brcmf_sdio_dev *sdiodev,
+				 struct sdio_func *func, u32 addr,
+				 struct sk_buff *pkt)
 {
 	unsigned int req_sz;
 	int err;
@@ -299,13 +300,17 @@ static int brcmf_sdiod_buff_read(struct brcmf_sdio_dev *sdiodev, uint fn,
 	req_sz = pkt->len + 3;
 	req_sz &= (uint)~3;
 
-	if (fn == 1)
-		err = sdio_memcpy_fromio(sdiodev->func[fn],
-					 ((u8 *)(pkt->data)), addr, req_sz);
-	else
-		/* function 2 read is FIFO operation */
-		err = sdio_readsb(sdiodev->func[fn],
-				  ((u8 *)(pkt->data)), addr, req_sz);
+	switch (func->num) {
+	case 1:
+		err = sdio_memcpy_fromio(func, ((u8 *)(pkt->data)), addr,
+					 req_sz);
+		break;
+	case 2:
+		err = sdio_readsb(func, ((u8 *)(pkt->data)), addr, req_sz);
+		break;
+	default:
+		BUG();
+	};
 
 	if (err == -ENOMEDIUM)
 		brcmf_sdiod_change_state(sdiodev, BRCMF_SDIOD_NOMEDIUM);
@@ -313,8 +318,9 @@ static int brcmf_sdiod_buff_read(struct brcmf_sdio_dev *sdiodev, uint fn,
 	return err;
 }
 
-static int brcmf_sdiod_buff_write(struct brcmf_sdio_dev *sdiodev, uint fn,
-				  u32 addr, struct sk_buff *pkt)
+static int brcmf_sdiod_buff_write(struct brcmf_sdio_dev *sdiodev,
+				  struct sdio_func *func, u32 addr,
+				  struct sk_buff *pkt)
 {
 	unsigned int req_sz;
 	int err;
@@ -323,8 +329,7 @@ static int brcmf_sdiod_buff_write(struct brcmf_sdio_dev *sdiodev, uint fn,
 	req_sz = pkt->len + 3;
 	req_sz &= (uint)~3;
 
-	err = sdio_memcpy_toio(sdiodev->func[fn], addr,
-			       ((u8 *)(pkt->data)), req_sz);
+	err = sdio_memcpy_toio(func, addr, ((u8 *)(pkt->data)), req_sz);
 
 	if (err == -ENOMEDIUM)
 		brcmf_sdiod_change_state(sdiodev, BRCMF_SDIOD_NOMEDIUM);
@@ -335,7 +340,7 @@ static int brcmf_sdiod_buff_write(struct brcmf_sdio_dev *sdiodev, uint fn,
 /**
  * brcmf_sdiod_sglist_rw - SDIO interface function for block data access
  * @sdiodev: brcmfmac sdio device
- * @fn: SDIO function number
+ * @func: SDIO function
  * @write: direction flag
  * @addr: dongle memory address as source/destination
  * @pkt: skb pointer
@@ -344,7 +349,8 @@ static int brcmf_sdiod_buff_write(struct brcmf_sdio_dev *sdiodev, uint fn,
  * stack for block data access. It assumes that the skb passed down by the
  * caller has already been padded and aligned.
  */
-static int brcmf_sdiod_sglist_rw(struct brcmf_sdio_dev *sdiodev, uint fn,
+static int brcmf_sdiod_sglist_rw(struct brcmf_sdio_dev *sdiodev,
+				 struct sdio_func *func,
 				 bool write, u32 addr,
 				 struct sk_buff_head *pktlist)
 {
@@ -370,7 +376,7 @@ static int brcmf_sdiod_sglist_rw(struct brcmf_sdio_dev *sdiodev, uint fn,
 		req_sz = 0;
 		skb_queue_walk(pktlist, pkt_next)
 			req_sz += pkt_next->len;
-		req_sz = ALIGN(req_sz, sdiodev->func[fn]->cur_blksize);
+		req_sz = ALIGN(req_sz, func->cur_blksize);
 		while (req_sz > PAGE_SIZE) {
 			pkt_next = brcmu_pkt_buf_get_skb(PAGE_SIZE);
 			if (pkt_next == NULL) {
@@ -389,7 +395,7 @@ static int brcmf_sdiod_sglist_rw(struct brcmf_sdio_dev *sdiodev, uint fn,
 		target_list = &local_list;
 	}
 
-	func_blk_sz = sdiodev->func[fn]->cur_blksize;
+	func_blk_sz = func->cur_blksize;
 	max_req_sz = sdiodev->max_request_size;
 	max_seg_cnt = min_t(unsigned short, sdiodev->max_segment_count,
 			    target_list->qlen);
@@ -406,10 +412,10 @@ static int brcmf_sdiod_sglist_rw(struct brcmf_sdio_dev *sdiodev, uint fn,
 	mmc_dat.flags = write ? MMC_DATA_WRITE : MMC_DATA_READ;
 	mmc_cmd.opcode = SD_IO_RW_EXTENDED;
 	mmc_cmd.arg = write ? 1<<31 : 0;	/* write flag  */
-	mmc_cmd.arg |= (fn & 0x7) << 28;	/* SDIO func num */
-	mmc_cmd.arg |= 1<<27;			/* block mode */
+	mmc_cmd.arg |= (func->num & 0x7) << 28;	/* SDIO func num */
+	mmc_cmd.arg |= 1 << 27;			/* block mode */
 	/* for function 1 the addr will be incremented */
-	mmc_cmd.arg |= (fn == 1) ? 1<<26 : 0;
+	mmc_cmd.arg |= (func->num == 1) ? 1 << 26 : 0;
 	mmc_cmd.flags = MMC_RSP_SPI_R5 | MMC_RSP_R5 | MMC_CMD_ADTC;
 	mmc_req.cmd = &mmc_cmd;
 	mmc_req.data = &mmc_dat;
@@ -455,11 +461,11 @@ static int brcmf_sdiod_sglist_rw(struct brcmf_sdio_dev *sdiodev, uint fn,
 		mmc_cmd.arg |= (addr & 0x1FFFF) << 9;	/* address */
 		mmc_cmd.arg |= mmc_dat.blocks & 0x1FF;	/* block count */
 		/* incrementing addr for function 1 */
-		if (fn == 1)
+		if (func->num == 1)
 			addr += req_sz;
 
-		mmc_set_data_timeout(&mmc_dat, sdiodev->func[fn]->card);
-		mmc_wait_for_req(sdiodev->func[fn]->card->host, &mmc_req);
+		mmc_set_data_timeout(&mmc_dat, func->card);
+		mmc_wait_for_req(func->card->host, &mmc_req);
 
 		ret = mmc_cmd.error ? mmc_cmd.error : mmc_dat.error;
 		if (ret == -ENOMEDIUM) {
@@ -539,7 +545,7 @@ int brcmf_sdiod_recv_pkt(struct brcmf_sdio_dev *sdiodev, struct sk_buff *pkt)
 	addr &= SBSDIO_SB_OFT_ADDR_MASK;
 	addr |= SBSDIO_SB_ACCESS_2_4B_FLAG;
 
-	err = brcmf_sdiod_buff_read(sdiodev, SDIO_FUNC_2, addr, pkt);
+	err = brcmf_sdiod_buff_read(sdiodev, sdiodev->func[2], addr, pkt);
 
 done:
 	return err;
@@ -564,13 +570,13 @@ int brcmf_sdiod_recv_chain(struct brcmf_sdio_dev *sdiodev,
 	addr |= SBSDIO_SB_ACCESS_2_4B_FLAG;
 
 	if (pktq->qlen == 1)
-		err = brcmf_sdiod_buff_read(sdiodev, SDIO_FUNC_2, addr,
+		err = brcmf_sdiod_buff_read(sdiodev, sdiodev->func[2], addr,
 					    pktq->next);
 	else if (!sdiodev->sg_support) {
 		glom_skb = brcmu_pkt_buf_get_skb(totlen);
 		if (!glom_skb)
 			return -ENOMEM;
-		err = brcmf_sdiod_buff_read(sdiodev, SDIO_FUNC_2, addr,
+		err = brcmf_sdiod_buff_read(sdiodev, sdiodev->func[2], addr,
 					    glom_skb);
 		if (err)
 			goto done;
@@ -580,8 +586,8 @@ int brcmf_sdiod_recv_chain(struct brcmf_sdio_dev *sdiodev,
 			skb_pull(glom_skb, skb->len);
 		}
 	} else
-		err = brcmf_sdiod_sglist_rw(sdiodev, SDIO_FUNC_2, false, addr,
-					    pktq);
+		err = brcmf_sdiod_sglist_rw(sdiodev, sdiodev->func[2], false,
+					    addr, pktq);
 
 done:
 	brcmu_pkt_buf_free_skb(glom_skb);
@@ -612,7 +618,8 @@ int brcmf_sdiod_send_buf(struct brcmf_sdio_dev *sdiodev, u8 *buf, uint nbytes)
 	addr |= SBSDIO_SB_ACCESS_2_4B_FLAG;
 
 	if (!err)
-		err = brcmf_sdiod_buff_write(sdiodev, SDIO_FUNC_2, addr, mypkt);
+		err = brcmf_sdiod_buff_write(sdiodev, sdiodev->func[2], addr,
+					     mypkt);
 
 	brcmu_pkt_buf_free_skb(mypkt);
 
@@ -637,14 +644,14 @@ int brcmf_sdiod_send_pkt(struct brcmf_sdio_dev *sdiodev,
 
 	if (pktq->qlen == 1 || !sdiodev->sg_support) {
 		skb_queue_walk(pktq, skb) {
-			err = brcmf_sdiod_buff_write(sdiodev, SDIO_FUNC_2,
+			err = brcmf_sdiod_buff_write(sdiodev, sdiodev->func[2],
 						     addr, skb);
 			if (err)
 				break;
 		}
 	} else {
-		err = brcmf_sdiod_sglist_rw(sdiodev, SDIO_FUNC_2, true, addr,
-					    pktq);
+		err = brcmf_sdiod_sglist_rw(sdiodev, sdiodev->func[2], true,
+					    addr, pktq);
 	}
 
 	return err;
@@ -694,10 +701,10 @@ brcmf_sdiod_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address,
 
 		if (write) {
 			memcpy(pkt->data, data, dsize);
-			err = brcmf_sdiod_buff_write(sdiodev, SDIO_FUNC_1,
+			err = brcmf_sdiod_buff_write(sdiodev, sdiodev->func[1],
 						     sdaddr, pkt);
 		} else {
-			err = brcmf_sdiod_buff_read(sdiodev, SDIO_FUNC_1,
+			err = brcmf_sdiod_buff_read(sdiodev, sdiodev->func[1],
 						    sdaddr, pkt);
 		}
 
@@ -726,12 +733,12 @@ brcmf_sdiod_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address,
 	return err;
 }
 
-int brcmf_sdiod_abort(struct brcmf_sdio_dev *sdiodev, u8 fn)
+int brcmf_sdiod_abort(struct brcmf_sdio_dev *sdiodev, struct sdio_func *func)
 {
 	brcmf_dbg(SDIO, "Enter\n");
 
 	/* Issue abort cmd52 command through F0 */
-	brcmf_sdiod_func0_wb(sdiodev, SDIO_CCCR_ABORT, fn, NULL);
+	brcmf_sdiod_func0_wb(sdiodev, SDIO_CCCR_ABORT, func->num, NULL);
 
 	brcmf_dbg(SDIO, "Exit\n");
 	return 0;
@@ -1102,7 +1109,7 @@ static int brcmf_ops_sdio_suspend(struct device *dev)
 
 	func = container_of(dev, struct sdio_func, dev);
 	brcmf_dbg(SDIO, "Enter: F%d\n", func->num);
-	if (func->num != SDIO_FUNC_1)
+	if (func->num != 1)
 		return 0;
 
 
@@ -1131,7 +1138,7 @@ static int brcmf_ops_sdio_resume(struct device *dev)
 	struct sdio_func *func = container_of(dev, struct sdio_func, dev);
 
 	brcmf_dbg(SDIO, "Enter: F%d\n", func->num);
-	if (func->num != SDIO_FUNC_2)
+	if (func->num != 2)
 		return 0;
 
 	brcmf_sdiod_freezer_off(sdiodev);
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
index 8a730133db77..c95d9efe8672 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
@@ -1148,7 +1148,7 @@ static void brcmf_sdio_rxfail(struct brcmf_sdio *bus, bool abort, bool rtx)
 		  rtx ? ", send NAK" : "");
 
 	if (abort)
-		brcmf_sdiod_abort(bus->sdiodev, SDIO_FUNC_2);
+		brcmf_sdiod_abort(bus->sdiodev, bus->sdiodev->func[2]);
 
 	brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL, SFC_RF_TERM,
 			   &err);
@@ -1198,7 +1198,7 @@ static void brcmf_sdio_txfail(struct brcmf_sdio *bus)
 	brcmf_err("sdio error, abort command and terminate frame\n");
 	bus->sdcnt.tx_sderrs++;
 
-	brcmf_sdiod_abort(sdiodev, SDIO_FUNC_2);
+	brcmf_sdiod_abort(sdiodev, sdiodev->func[2]);
 	brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_FRAMECTRL, SFC_WF_TERM, NULL);
 	bus->sdcnt.f1regdata++;
 
@@ -2061,7 +2061,7 @@ static int brcmf_sdio_txpkt_prep_sg(struct brcmf_sdio *bus,
 	int ntail, ret;
 
 	sdiodev = bus->sdiodev;
-	blksize = sdiodev->func[SDIO_FUNC_2]->cur_blksize;
+	blksize = sdiodev->func[2]->cur_blksize;
 	/* sg entry alignment should be a divisor of block size */
 	WARN_ON(blksize % bus->sgentry_align);
 
@@ -2431,7 +2431,7 @@ static void brcmf_sdio_bus_stop(struct device *dev)
 
 		/* Turn off the bus (F2), free any pending packets */
 		brcmf_dbg(INTR, "disable SDIO interrupts\n");
-		sdio_disable_func(sdiodev->func[SDIO_FUNC_2]);
+		sdio_disable_func(sdiodev->func[2]);
 
 		/* Clear any pending interrupts now that F2 is disabled */
 		brcmf_sdiod_writel(sdiodev, core->base + __sd_reg(intstatus),
@@ -4043,8 +4043,7 @@ static void brcmf_sdio_firmware_callback(struct device *dev, int err,
 	brcmf_sdiod_writel(sdiod, core->base + __sd_reg(tosbmailboxdata),
 			   SDPCM_PROT_VERSION << SMB_DATA_VERSION_SHIFT, NULL);
 
-	err = sdio_enable_func(sdiodev->func[SDIO_FUNC_2]);
-
+	err = sdio_enable_func(sdiodev->func[2]);
 
 	brcmf_dbg(INFO, "enable F2: err=%d\n", err);
 
@@ -4059,7 +4058,7 @@ static void brcmf_sdio_firmware_callback(struct device *dev, int err,
 		brcmf_sdiod_writeb(sdiodev, SBSDIO_WATERMARK, 8, &err);
 	} else {
 		/* Disable F2 again */
-		sdio_disable_func(sdiodev->func[SDIO_FUNC_2]);
+		sdio_disable_func(sdiodev->func[2]);
 		goto release;
 	}
 
@@ -4197,7 +4196,7 @@ struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev)
 	sdio_claim_host(bus->sdiodev->func[1]);
 
 	/* Disable F2 to clear any intermediate frame state on the dongle */
-	sdio_disable_func(bus->sdiodev->func[SDIO_FUNC_2]);
+	sdio_disable_func(bus->sdiodev->func[2]);
 
 	bus->rxflow = false;
 
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
index 6e2fc065b8a7..54a03036fccb 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
@@ -45,9 +45,6 @@
 #define REG_F0_REG_MASK		0x7FF
 #define REG_F1_MISC_MASK	0x1FFFF
 
-/* as of sdiod rev 0, supports 3 functions */
-#define SBSDIO_NUM_FUNCTION		3
-
 /* function 0 vendor specific CCCR registers */
 
 #define SDIO_CCCR_BRCM_CARDCAP			0xf0
@@ -350,7 +347,8 @@ int brcmf_sdiod_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address,
 		      u8 *data, uint size);
 
 /* Issue an abort to the specified function */
-int brcmf_sdiod_abort(struct brcmf_sdio_dev *sdiodev, u8 fn);
+int brcmf_sdiod_abort(struct brcmf_sdio_dev *sdiodev, struct sdio_func *func);
+
 void brcmf_sdiod_sgtable_alloc(struct brcmf_sdio_dev *sdiodev);
 void brcmf_sdiod_change_state(struct brcmf_sdio_dev *sdiodev,
 			      enum brcmf_sdiod_state state);
-- 
2.11.0

[PATCH 28/30] brcmfmac: Clean up interrupt macros

[Ian Molton]

Make it more obvious that this code acually enables interrupts, and
provide nice definitions for the bits in the register.

Signed-off-by: Ian Molton <ian@mnementh.co.uk>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c | 3 ++-
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h   | 8 +++++---
 2 files changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
index 0cd081d732f9..75e9a70857e3 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
@@ -148,7 +148,8 @@ int brcmf_sdiod_intr_register(struct brcmf_sdio_dev *sdiodev)
 
 		/* must configure SDIO_CCCR_IENx to enable irq */
 		data = brcmf_sdiod_func0_rb(sdiodev, SDIO_CCCR_IENx, &ret);
-		data |= 1 << SDIO_FUNC_1 | 1 << SDIO_FUNC_2 | 1;
+		data |= SDIO_CCCR_IEN_FUNC1 | SDIO_CCCR_IEN_FUNC2 |
+			SDIO_CCCR_IEN_FUNC0;
 		brcmf_sdiod_func0_wb(sdiodev, SDIO_CCCR_IENx, data, &ret);
 
 		/* redirect, configure and enable io for interrupt signal */
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
index 54a03036fccb..04661ecbf395 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
@@ -24,9 +24,6 @@
 /* Maximum number of I/O funcs */
 #define NUM_SDIO_FUNCS	3
 
-#define SDIO_FUNC_1		1
-#define SDIO_FUNC_2		2
-
 #define SDIOD_FBR_SIZE		0x100
 
 /* io_en */
@@ -52,6 +49,11 @@
 #define SDIO_CCCR_BRCM_CARDCAP_CMD14_EXT	BIT(2)
 #define SDIO_CCCR_BRCM_CARDCAP_CMD_NODEC	BIT(3)
 
+/* Interrupt enable bits for each function */
+#define SDIO_CCCR_IEN_FUNC0			BIT(0)
+#define SDIO_CCCR_IEN_FUNC1			BIT(1)
+#define SDIO_CCCR_IEN_FUNC2			BIT(2)
+
 #define SDIO_CCCR_BRCM_CARDCTRL			0xf1
 #define SDIO_CCCR_BRCM_CARDCTRL_WLANRESET	BIT(1)
 
-- 
2.11.0

[PATCH 29/30] brcmfmac: Remove array of functions

[Ian Molton]

Replace the array of functions with a pair of pointers to the
 relevant functions.

Signed-off-by: Ian Molton <ian@mnementh.co.uk>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
---
 .../wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c  | 115 +++++++-------
 .../wireless/broadcom/brcm80211/brcmfmac/sdio.c    | 170 ++++++++++-----------
 .../wireless/broadcom/brcm80211/brcmfmac/sdio.h    |  15 +-
 3 files changed, 147 insertions(+), 153 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
index 75e9a70857e3..4080085ef44b 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
@@ -118,7 +118,7 @@ int brcmf_sdiod_intr_register(struct brcmf_sdio_dev *sdiodev)
 
 		ret = request_irq(pdata->oob_irq_nr, brcmf_sdiod_oob_irqhandler,
 				  pdata->oob_irq_flags, "brcmf_oob_intr",
-				  &sdiodev->func[1]->dev);
+				  &sdiodev->func1->dev);
 		if (ret != 0) {
 			brcmf_err("request_irq failed %d\n", ret);
 			return ret;
@@ -132,7 +132,7 @@ int brcmf_sdiod_intr_register(struct brcmf_sdio_dev *sdiodev)
 		}
 		sdiodev->irq_wake = true;
 
-		sdio_claim_host(sdiodev->func[1]);
+		sdio_claim_host(sdiodev->func1);
 
 		if (sdiodev->bus_if->chip == BRCM_CC_43362_CHIP_ID) {
 			/* assign GPIO to SDIO core */
@@ -157,13 +157,13 @@ int brcmf_sdiod_intr_register(struct brcmf_sdio_dev *sdiodev)
 		if (pdata->oob_irq_flags & IRQF_TRIGGER_HIGH)
 			data |= SDIO_CCCR_BRCM_SEPINT_ACT_HI;
 		brcmf_sdiod_func0_wb(sdiodev, SDIO_CCCR_BRCM_SEPINT, data, &ret);
-		sdio_release_host(sdiodev->func[1]);
+		sdio_release_host(sdiodev->func1);
 	} else {
 		brcmf_dbg(SDIO, "Entering\n");
-		sdio_claim_host(sdiodev->func[1]);
-		sdio_claim_irq(sdiodev->func[1], brcmf_sdiod_ib_irqhandler);
-		sdio_claim_irq(sdiodev->func[2], brcmf_sdiod_dummy_irqhandler);
-		sdio_release_host(sdiodev->func[1]);
+		sdio_claim_host(sdiodev->func1);
+		sdio_claim_irq(sdiodev->func1, brcmf_sdiod_ib_irqhandler);
+		sdio_claim_irq(sdiodev->func2, brcmf_sdiod_dummy_irqhandler);
+		sdio_release_host(sdiodev->func1);
 		sdiodev->sd_irq_requested = true;
 	}
 
@@ -181,26 +181,26 @@ void brcmf_sdiod_intr_unregister(struct brcmf_sdio_dev *sdiodev)
 		struct brcmfmac_sdio_pd *pdata;
 
 		pdata = &sdiodev->settings->bus.sdio;
-		sdio_claim_host(sdiodev->func[1]);
+		sdio_claim_host(sdiodev->func1);
 		brcmf_sdiod_func0_wb(sdiodev, SDIO_CCCR_BRCM_SEPINT, 0, NULL);
 		brcmf_sdiod_func0_wb(sdiodev, SDIO_CCCR_IENx, 0, NULL);
-		sdio_release_host(sdiodev->func[1]);
+		sdio_release_host(sdiodev->func1);
 
 		sdiodev->oob_irq_requested = false;
 		if (sdiodev->irq_wake) {
 			disable_irq_wake(pdata->oob_irq_nr);
 			sdiodev->irq_wake = false;
 		}
-		free_irq(pdata->oob_irq_nr, &sdiodev->func[1]->dev);
+		free_irq(pdata->oob_irq_nr, &sdiodev->func1->dev);
 		sdiodev->irq_en = false;
 		sdiodev->oob_irq_requested = false;
 	}
 
 	if (sdiodev->sd_irq_requested) {
-		sdio_claim_host(sdiodev->func[1]);
-		sdio_release_irq(sdiodev->func[2]);
-		sdio_release_irq(sdiodev->func[1]);
-		sdio_release_host(sdiodev->func[1]);
+		sdio_claim_host(sdiodev->func1);
+		sdio_release_irq(sdiodev->func2);
+		sdio_release_irq(sdiodev->func1);
+		sdio_release_host(sdiodev->func1);
 		sdiodev->sd_irq_requested = false;
 	}
 }
@@ -262,7 +262,7 @@ u32 brcmf_sdiod_readl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret)
 	addr &= SBSDIO_SB_OFT_ADDR_MASK;
 	addr |= SBSDIO_SB_ACCESS_2_4B_FLAG;
 
-	data = sdio_readl(sdiodev->func[1], addr, &retval);
+	data = sdio_readl(sdiodev->func1, addr, &retval);
 
 out:
 	if (ret)
@@ -283,7 +283,7 @@ void brcmf_sdiod_writel(struct brcmf_sdio_dev *sdiodev, u32 addr,
 	addr &= SBSDIO_SB_OFT_ADDR_MASK;
 	addr |= SBSDIO_SB_ACCESS_2_4B_FLAG;
 
-	sdio_writel(sdiodev->func[1], data, addr, &retval);
+	sdio_writel(sdiodev->func1, data, addr, &retval);
 
 out:
 	if (ret)
@@ -546,7 +546,7 @@ int brcmf_sdiod_recv_pkt(struct brcmf_sdio_dev *sdiodev, struct sk_buff *pkt)
 	addr &= SBSDIO_SB_OFT_ADDR_MASK;
 	addr |= SBSDIO_SB_ACCESS_2_4B_FLAG;
 
-	err = brcmf_sdiod_buff_read(sdiodev, sdiodev->func[2], addr, pkt);
+	err = brcmf_sdiod_buff_read(sdiodev, sdiodev->func2, addr, pkt);
 
 done:
 	return err;
@@ -571,13 +571,13 @@ int brcmf_sdiod_recv_chain(struct brcmf_sdio_dev *sdiodev,
 	addr |= SBSDIO_SB_ACCESS_2_4B_FLAG;
 
 	if (pktq->qlen == 1)
-		err = brcmf_sdiod_buff_read(sdiodev, sdiodev->func[2], addr,
+		err = brcmf_sdiod_buff_read(sdiodev, sdiodev->func2, addr,
 					    pktq->next);
 	else if (!sdiodev->sg_support) {
 		glom_skb = brcmu_pkt_buf_get_skb(totlen);
 		if (!glom_skb)
 			return -ENOMEM;
-		err = brcmf_sdiod_buff_read(sdiodev, sdiodev->func[2], addr,
+		err = brcmf_sdiod_buff_read(sdiodev, sdiodev->func2, addr,
 					    glom_skb);
 		if (err)
 			goto done;
@@ -587,7 +587,7 @@ int brcmf_sdiod_recv_chain(struct brcmf_sdio_dev *sdiodev,
 			skb_pull(glom_skb, skb->len);
 		}
 	} else
-		err = brcmf_sdiod_sglist_rw(sdiodev, sdiodev->func[2], false,
+		err = brcmf_sdiod_sglist_rw(sdiodev, sdiodev->func2, false,
 					    addr, pktq);
 
 done:
@@ -619,7 +619,7 @@ int brcmf_sdiod_send_buf(struct brcmf_sdio_dev *sdiodev, u8 *buf, uint nbytes)
 	addr |= SBSDIO_SB_ACCESS_2_4B_FLAG;
 
 	if (!err)
-		err = brcmf_sdiod_buff_write(sdiodev, sdiodev->func[2], addr,
+		err = brcmf_sdiod_buff_write(sdiodev, sdiodev->func2, addr,
 					     mypkt);
 
 	brcmu_pkt_buf_free_skb(mypkt);
@@ -645,13 +645,13 @@ int brcmf_sdiod_send_pkt(struct brcmf_sdio_dev *sdiodev,
 
 	if (pktq->qlen == 1 || !sdiodev->sg_support) {
 		skb_queue_walk(pktq, skb) {
-			err = brcmf_sdiod_buff_write(sdiodev, sdiodev->func[2],
+			err = brcmf_sdiod_buff_write(sdiodev, sdiodev->func2,
 						     addr, skb);
 			if (err)
 				break;
 		}
 	} else {
-		err = brcmf_sdiod_sglist_rw(sdiodev, sdiodev->func[2], true,
+		err = brcmf_sdiod_sglist_rw(sdiodev, sdiodev->func2, true,
 					    addr, pktq);
 	}
 
@@ -682,7 +682,7 @@ brcmf_sdiod_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address,
 	else
 		dsize = size;
 
-	sdio_claim_host(sdiodev->func[1]);
+	sdio_claim_host(sdiodev->func1);
 
 	/* Do the transfer(s) */
 	while (size) {
@@ -702,10 +702,10 @@ brcmf_sdiod_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address,
 
 		if (write) {
 			memcpy(pkt->data, data, dsize);
-			err = brcmf_sdiod_buff_write(sdiodev, sdiodev->func[1],
+			err = brcmf_sdiod_buff_write(sdiodev, sdiodev->func1,
 						     sdaddr, pkt);
 		} else {
-			err = brcmf_sdiod_buff_read(sdiodev, sdiodev->func[1],
+			err = brcmf_sdiod_buff_read(sdiodev, sdiodev->func1,
 						    sdaddr, pkt);
 		}
 
@@ -729,7 +729,7 @@ brcmf_sdiod_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address,
 
 	dev_kfree_skb(pkt);
 
-	sdio_release_host(sdiodev->func[1]);
+	sdio_release_host(sdiodev->func1);
 
 	return err;
 }
@@ -753,7 +753,7 @@ void brcmf_sdiod_sgtable_alloc(struct brcmf_sdio_dev *sdiodev)
 	uint nents;
 	int err;
 
-	func = sdiodev->func[2];
+	func = sdiodev->func2;
 	host = func->card->host;
 	sdiodev->sg_support = host->max_segs > 1;
 	max_blocks = min_t(uint, host->max_blk_count, 511u);
@@ -814,17 +814,17 @@ static int brcmf_sdiod_freezer_on(struct brcmf_sdio_dev *sdiodev)
 	brcmf_sdio_trigger_dpc(sdiodev->bus);
 	wait_event(sdiodev->freezer->thread_freeze,
 		   atomic_read(expect) == sdiodev->freezer->frozen_count);
-	sdio_claim_host(sdiodev->func[1]);
+	sdio_claim_host(sdiodev->func1);
 	res = brcmf_sdio_sleep(sdiodev->bus, true);
-	sdio_release_host(sdiodev->func[1]);
+	sdio_release_host(sdiodev->func1);
 	return res;
 }
 
 static void brcmf_sdiod_freezer_off(struct brcmf_sdio_dev *sdiodev)
 {
-	sdio_claim_host(sdiodev->func[1]);
+	sdio_claim_host(sdiodev->func1);
 	brcmf_sdio_sleep(sdiodev->bus, false);
-	sdio_release_host(sdiodev->func[1]);
+	sdio_release_host(sdiodev->func1);
 	atomic_set(&sdiodev->freezer->freezing, 0);
 	complete_all(&sdiodev->freezer->resumed);
 }
@@ -874,19 +874,19 @@ static int brcmf_sdiod_remove(struct brcmf_sdio_dev *sdiodev)
 	brcmf_sdiod_freezer_detach(sdiodev);
 
 	/* Disable Function 2 */
-	sdio_claim_host(sdiodev->func[2]);
-	sdio_disable_func(sdiodev->func[2]);
-	sdio_release_host(sdiodev->func[2]);
+	sdio_claim_host(sdiodev->func2);
+	sdio_disable_func(sdiodev->func2);
+	sdio_release_host(sdiodev->func2);
 
 	/* Disable Function 1 */
-	sdio_claim_host(sdiodev->func[1]);
-	sdio_disable_func(sdiodev->func[1]);
-	sdio_release_host(sdiodev->func[1]);
+	sdio_claim_host(sdiodev->func1);
+	sdio_disable_func(sdiodev->func1);
+	sdio_release_host(sdiodev->func1);
 
 	sg_free_table(&sdiodev->sgtable);
 	sdiodev->sbwad = 0;
 
-	pm_runtime_allow(sdiodev->func[1]->card->host->parent);
+	pm_runtime_allow(sdiodev->func1->card->host->parent);
 	return 0;
 }
 
@@ -902,29 +902,27 @@ static int brcmf_sdiod_probe(struct brcmf_sdio_dev *sdiodev)
 {
 	int ret = 0;
 
-	sdiodev->num_funcs = 2;
+	sdio_claim_host(sdiodev->func1);
 
-	sdio_claim_host(sdiodev->func[1]);
-
-	ret = sdio_set_block_size(sdiodev->func[1], SDIO_FUNC1_BLOCKSIZE);
+	ret = sdio_set_block_size(sdiodev->func1, SDIO_FUNC1_BLOCKSIZE);
 	if (ret) {
 		brcmf_err("Failed to set F1 blocksize\n");
-		sdio_release_host(sdiodev->func[1]);
+		sdio_release_host(sdiodev->func1);
 		goto out;
 	}
-	ret = sdio_set_block_size(sdiodev->func[2], SDIO_FUNC2_BLOCKSIZE);
+	ret = sdio_set_block_size(sdiodev->func2, SDIO_FUNC2_BLOCKSIZE);
 	if (ret) {
 		brcmf_err("Failed to set F2 blocksize\n");
-		sdio_release_host(sdiodev->func[1]);
+		sdio_release_host(sdiodev->func1);
 		goto out;
 	}
 
 	/* increase F2 timeout */
-	sdiodev->func[2]->enable_timeout = SDIO_WAIT_F2RDY;
+	sdiodev->func2->enable_timeout = SDIO_WAIT_F2RDY;
 
 	/* Enable Function 1 */
-	ret = sdio_enable_func(sdiodev->func[1]);
-	sdio_release_host(sdiodev->func[1]);
+	ret = sdio_enable_func(sdiodev->func1);
+	sdio_release_host(sdiodev->func1);
 	if (ret) {
 		brcmf_err("Failed to enable F1: err=%d\n", ret);
 		goto out;
@@ -940,7 +938,7 @@ static int brcmf_sdiod_probe(struct brcmf_sdio_dev *sdiodev)
 		ret = -ENODEV;
 		goto out;
 	}
-	brcmf_sdiod_host_fixup(sdiodev->func[2]->card->host);
+	brcmf_sdiod_host_fixup(sdiodev->func2->card->host);
 out:
 	if (ret)
 		brcmf_sdiod_remove(sdiodev);
@@ -1027,16 +1025,15 @@ static int brcmf_ops_sdio_probe(struct sdio_func *func,
 	/* store refs to functions used. mmc_card does
 	 * not hold the F0 function pointer.
 	 */
-	sdiodev->func[0] = NULL;
-	sdiodev->func[1] = func->card->sdio_func[0];
-	sdiodev->func[2] = func;
+	sdiodev->func1 = func->card->sdio_func[0];
+	sdiodev->func2 = func;
 
 	sdiodev->bus_if = bus_if;
 	bus_if->bus_priv.sdio = sdiodev;
 	bus_if->proto_type = BRCMF_PROTO_BCDC;
 	dev_set_drvdata(&func->dev, bus_if);
-	dev_set_drvdata(&sdiodev->func[1]->dev, bus_if);
-	sdiodev->dev = &sdiodev->func[1]->dev;
+	dev_set_drvdata(&sdiodev->func1->dev, bus_if);
+	sdiodev->dev = &sdiodev->func1->dev;
 
 	brcmf_sdiod_change_state(sdiodev, BRCMF_SDIOD_DOWN);
 
@@ -1052,7 +1049,7 @@ static int brcmf_ops_sdio_probe(struct sdio_func *func,
 
 fail:
 	dev_set_drvdata(&func->dev, NULL);
-	dev_set_drvdata(&sdiodev->func[1]->dev, NULL);
+	dev_set_drvdata(&sdiodev->func1->dev, NULL);
 	kfree(sdiodev);
 	kfree(bus_if);
 	return err;
@@ -1081,8 +1078,8 @@ static void brcmf_ops_sdio_remove(struct sdio_func *func)
 		/* only proceed with rest of cleanup if func 1 */
 		brcmf_sdiod_remove(sdiodev);
 
-		dev_set_drvdata(&sdiodev->func[1]->dev, NULL);
-		dev_set_drvdata(&sdiodev->func[2]->dev, NULL);
+		dev_set_drvdata(&sdiodev->func1->dev, NULL);
+		dev_set_drvdata(&sdiodev->func2->dev, NULL);
 
 		kfree(bus_if);
 		kfree(sdiodev);
@@ -1127,7 +1124,7 @@ static int brcmf_ops_sdio_suspend(struct device *dev)
 		else
 			sdio_flags |= MMC_PM_WAKE_SDIO_IRQ;
 	}
-	if (sdio_set_host_pm_flags(sdiodev->func[1], sdio_flags))
+	if (sdio_set_host_pm_flags(sdiodev->func1, sdio_flags))
 		brcmf_err("Failed to set pm_flags %x\n", sdio_flags);
 	return 0;
 }
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
index c95d9efe8672..b77eb6a6fddc 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
@@ -976,7 +976,7 @@ static int brcmf_sdio_readshared(struct brcmf_sdio *bus,
 	struct sdpcm_shared_le sh_le;
 	__le32 addr_le;
 
-	sdio_claim_host(bus->sdiodev->func[1]);
+	sdio_claim_host(bus->sdiodev->func1);
 	brcmf_sdio_bus_sleep(bus, false, false);
 
 	/*
@@ -1010,7 +1010,7 @@ static int brcmf_sdio_readshared(struct brcmf_sdio *bus,
 	if (rv < 0)
 		goto fail;
 
-	sdio_release_host(bus->sdiodev->func[1]);
+	sdio_release_host(bus->sdiodev->func1);
 
 	/* Endianness */
 	sh->flags = le32_to_cpu(sh_le.flags);
@@ -1032,7 +1032,7 @@ static int brcmf_sdio_readshared(struct brcmf_sdio *bus,
 fail:
 	brcmf_err("unable to obtain sdpcm_shared info: rv=%d (addr=0x%x)\n",
 		  rv, addr);
-	sdio_release_host(bus->sdiodev->func[1]);
+	sdio_release_host(bus->sdiodev->func1);
 	return rv;
 }
 
@@ -1148,7 +1148,7 @@ static void brcmf_sdio_rxfail(struct brcmf_sdio *bus, bool abort, bool rtx)
 		  rtx ? ", send NAK" : "");
 
 	if (abort)
-		brcmf_sdiod_abort(bus->sdiodev, bus->sdiodev->func[2]);
+		brcmf_sdiod_abort(bus->sdiodev, bus->sdiodev->func2);
 
 	brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL, SFC_RF_TERM,
 			   &err);
@@ -1198,7 +1198,7 @@ static void brcmf_sdio_txfail(struct brcmf_sdio *bus)
 	brcmf_err("sdio error, abort command and terminate frame\n");
 	bus->sdcnt.tx_sderrs++;
 
-	brcmf_sdiod_abort(sdiodev, sdiodev->func[2]);
+	brcmf_sdiod_abort(sdiodev, sdiodev->func2);
 	brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_FRAMECTRL, SFC_WF_TERM, NULL);
 	bus->sdcnt.f1regdata++;
 
@@ -1554,10 +1554,10 @@ static u8 brcmf_sdio_rxglom(struct brcmf_sdio *bus, u8 rxseq)
 		 * read directly into the chained packet, or allocate a large
 		 * packet and and copy into the chain.
 		 */
-		sdio_claim_host(bus->sdiodev->func[1]);
+		sdio_claim_host(bus->sdiodev->func1);
 		errcode = brcmf_sdiod_recv_chain(bus->sdiodev,
 						 &bus->glom, dlen);
-		sdio_release_host(bus->sdiodev->func[1]);
+		sdio_release_host(bus->sdiodev->func1);
 		bus->sdcnt.f2rxdata++;
 
 		/* On failure, kill the superframe */
@@ -1565,11 +1565,11 @@ static u8 brcmf_sdio_rxglom(struct brcmf_sdio *bus, u8 rxseq)
 			brcmf_err("glom read of %d bytes failed: %d\n",
 				  dlen, errcode);
 
-			sdio_claim_host(bus->sdiodev->func[1]);
+			sdio_claim_host(bus->sdiodev->func1);
 			brcmf_sdio_rxfail(bus, true, false);
 			bus->sdcnt.rxglomfail++;
 			brcmf_sdio_free_glom(bus);
-			sdio_release_host(bus->sdiodev->func[1]);
+			sdio_release_host(bus->sdiodev->func1);
 			return 0;
 		}
 
@@ -1579,10 +1579,10 @@ static u8 brcmf_sdio_rxglom(struct brcmf_sdio *bus, u8 rxseq)
 
 		rd_new.seq_num = rxseq;
 		rd_new.len = dlen;
-		sdio_claim_host(bus->sdiodev->func[1]);
+		sdio_claim_host(bus->sdiodev->func1);
 		errcode = brcmf_sdio_hdparse(bus, pfirst->data, &rd_new,
 					     BRCMF_SDIO_FT_SUPER);
-		sdio_release_host(bus->sdiodev->func[1]);
+		sdio_release_host(bus->sdiodev->func1);
 		bus->cur_read.len = rd_new.len_nxtfrm << 4;
 
 		/* Remove superframe header, remember offset */
@@ -1598,10 +1598,10 @@ static u8 brcmf_sdio_rxglom(struct brcmf_sdio *bus, u8 rxseq)
 
 			rd_new.len = pnext->len;
 			rd_new.seq_num = rxseq++;
-			sdio_claim_host(bus->sdiodev->func[1]);
+			sdio_claim_host(bus->sdiodev->func1);
 			errcode = brcmf_sdio_hdparse(bus, pnext->data, &rd_new,
 						     BRCMF_SDIO_FT_SUB);
-			sdio_release_host(bus->sdiodev->func[1]);
+			sdio_release_host(bus->sdiodev->func1);
 			brcmf_dbg_hex_dump(BRCMF_GLOM_ON(),
 					   pnext->data, 32, "subframe:\n");
 
@@ -1610,11 +1610,11 @@ static u8 brcmf_sdio_rxglom(struct brcmf_sdio *bus, u8 rxseq)
 
 		if (errcode) {
 			/* Terminate frame on error */
-			sdio_claim_host(bus->sdiodev->func[1]);
+			sdio_claim_host(bus->sdiodev->func1);
 			brcmf_sdio_rxfail(bus, true, false);
 			bus->sdcnt.rxglomfail++;
 			brcmf_sdio_free_glom(bus);
-			sdio_release_host(bus->sdiodev->func[1]);
+			sdio_release_host(bus->sdiodev->func1);
 			bus->cur_read.len = 0;
 			return 0;
 		}
@@ -1822,7 +1822,7 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes)
 
 		rd->len_left = rd->len;
 		/* read header first for unknow frame length */
-		sdio_claim_host(bus->sdiodev->func[1]);
+		sdio_claim_host(bus->sdiodev->func1);
 		if (!rd->len) {
 			ret = brcmf_sdiod_recv_buf(bus->sdiodev,
 						   bus->rxhdr, BRCMF_FIRSTREAD);
@@ -1832,7 +1832,7 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes)
 					  ret);
 				bus->sdcnt.rx_hdrfail++;
 				brcmf_sdio_rxfail(bus, true, true);
-				sdio_release_host(bus->sdiodev->func[1]);
+				sdio_release_host(bus->sdiodev->func1);
 				continue;
 			}
 
@@ -1842,7 +1842,7 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes)
 
 			if (brcmf_sdio_hdparse(bus, bus->rxhdr, rd,
 					       BRCMF_SDIO_FT_NORMAL)) {
-				sdio_release_host(bus->sdiodev->func[1]);
+				sdio_release_host(bus->sdiodev->func1);
 				if (!bus->rxpending)
 					break;
 				else
@@ -1858,7 +1858,7 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes)
 				rd->len_nxtfrm = 0;
 				/* treat all packet as event if we don't know */
 				rd->channel = SDPCM_EVENT_CHANNEL;
-				sdio_release_host(bus->sdiodev->func[1]);
+				sdio_release_host(bus->sdiodev->func1);
 				continue;
 			}
 			rd->len_left = rd->len > BRCMF_FIRSTREAD ?
@@ -1875,7 +1875,7 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes)
 			brcmf_err("brcmu_pkt_buf_get_skb failed\n");
 			brcmf_sdio_rxfail(bus, false,
 					    RETRYCHAN(rd->channel));
-			sdio_release_host(bus->sdiodev->func[1]);
+			sdio_release_host(bus->sdiodev->func1);
 			continue;
 		}
 		skb_pull(pkt, head_read);
@@ -1883,16 +1883,16 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes)
 
 		ret = brcmf_sdiod_recv_pkt(bus->sdiodev, pkt);
 		bus->sdcnt.f2rxdata++;
-		sdio_release_host(bus->sdiodev->func[1]);
+		sdio_release_host(bus->sdiodev->func1);
 
 		if (ret < 0) {
 			brcmf_err("read %d bytes from channel %d failed: %d\n",
 				  rd->len, rd->channel, ret);
 			brcmu_pkt_buf_free_skb(pkt);
-			sdio_claim_host(bus->sdiodev->func[1]);
+			sdio_claim_host(bus->sdiodev->func1);
 			brcmf_sdio_rxfail(bus, true,
 					    RETRYCHAN(rd->channel));
-			sdio_release_host(bus->sdiodev->func[1]);
+			sdio_release_host(bus->sdiodev->func1);
 			continue;
 		}
 
@@ -1903,7 +1903,7 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes)
 		} else {
 			memcpy(bus->rxhdr, pkt->data, SDPCM_HDRLEN);
 			rd_new.seq_num = rd->seq_num;
-			sdio_claim_host(bus->sdiodev->func[1]);
+			sdio_claim_host(bus->sdiodev->func1);
 			if (brcmf_sdio_hdparse(bus, bus->rxhdr, &rd_new,
 					       BRCMF_SDIO_FT_NORMAL)) {
 				rd->len = 0;
@@ -1916,11 +1916,11 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes)
 					  roundup(rd_new.len, 16) >> 4);
 				rd->len = 0;
 				brcmf_sdio_rxfail(bus, true, true);
-				sdio_release_host(bus->sdiodev->func[1]);
+				sdio_release_host(bus->sdiodev->func1);
 				brcmu_pkt_buf_free_skb(pkt);
 				continue;
 			}
-			sdio_release_host(bus->sdiodev->func[1]);
+			sdio_release_host(bus->sdiodev->func1);
 			rd->len_nxtfrm = rd_new.len_nxtfrm;
 			rd->channel = rd_new.channel;
 			rd->dat_offset = rd_new.dat_offset;
@@ -1936,9 +1936,9 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes)
 					  rd_new.seq_num);
 				/* Force retry w/normal header read */
 				rd->len = 0;
-				sdio_claim_host(bus->sdiodev->func[1]);
+				sdio_claim_host(bus->sdiodev->func1);
 				brcmf_sdio_rxfail(bus, false, true);
-				sdio_release_host(bus->sdiodev->func[1]);
+				sdio_release_host(bus->sdiodev->func1);
 				brcmu_pkt_buf_free_skb(pkt);
 				continue;
 			}
@@ -1961,9 +1961,9 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes)
 			} else {
 				brcmf_err("%s: glom superframe w/o "
 					  "descriptor!\n", __func__);
-				sdio_claim_host(bus->sdiodev->func[1]);
+				sdio_claim_host(bus->sdiodev->func1);
 				brcmf_sdio_rxfail(bus, false, false);
-				sdio_release_host(bus->sdiodev->func[1]);
+				sdio_release_host(bus->sdiodev->func1);
 			}
 			/* prepare the descriptor for the next read */
 			rd->len = rd->len_nxtfrm << 4;
@@ -2061,7 +2061,7 @@ static int brcmf_sdio_txpkt_prep_sg(struct brcmf_sdio *bus,
 	int ntail, ret;
 
 	sdiodev = bus->sdiodev;
-	blksize = sdiodev->func[2]->cur_blksize;
+	blksize = sdiodev->func2->cur_blksize;
 	/* sg entry alignment should be a divisor of block size */
 	WARN_ON(blksize % bus->sgentry_align);
 
@@ -2240,14 +2240,14 @@ static int brcmf_sdio_txpkt(struct brcmf_sdio *bus, struct sk_buff_head *pktq,
 	if (ret)
 		goto done;
 
-	sdio_claim_host(bus->sdiodev->func[1]);
+	sdio_claim_host(bus->sdiodev->func1);
 	ret = brcmf_sdiod_send_pkt(bus->sdiodev, pktq);
 	bus->sdcnt.f2txdata++;
 
 	if (ret < 0)
 		brcmf_sdio_txfail(bus);
 
-	sdio_release_host(bus->sdiodev->func[1]);
+	sdio_release_host(bus->sdiodev->func1);
 
 done:
 	brcmf_sdio_txpkt_postp(bus, pktq);
@@ -2303,11 +2303,12 @@ static uint brcmf_sdio_sendfromq(struct brcmf_sdio *bus, uint maxframes)
 		/* In poll mode, need to check for other events */
 		if (!bus->intr) {
 			/* Check device status, signal pending interrupt */
-			sdio_claim_host(bus->sdiodev->func[1]);
+			sdio_claim_host(bus->sdiodev->func1);
 			intstatus = brcmf_sdiod_readl(bus->sdiodev, core->base +
 						      __sd_reg(intstatus),
 						      &ret);
-			sdio_release_host(bus->sdiodev->func[1]);
+			sdio_release_host(bus->sdiodev->func1);
+
 			bus->sdcnt.f2txdata++;
 			if (ret != 0)
 				break;
@@ -2407,7 +2408,7 @@ static void brcmf_sdio_bus_stop(struct device *dev)
 	}
 
 	if (sdiodev->state != BRCMF_SDIOD_NOMEDIUM) {
-		sdio_claim_host(sdiodev->func[1]);
+		sdio_claim_host(sdiodev->func1);
 
 		/* Enable clock for device interrupts */
 		brcmf_sdio_bus_sleep(bus, false, false);
@@ -2431,13 +2432,13 @@ static void brcmf_sdio_bus_stop(struct device *dev)
 
 		/* Turn off the bus (F2), free any pending packets */
 		brcmf_dbg(INTR, "disable SDIO interrupts\n");
-		sdio_disable_func(sdiodev->func[2]);
+		sdio_disable_func(sdiodev->func2);
 
 		/* Clear any pending interrupts now that F2 is disabled */
 		brcmf_sdiod_writel(sdiodev, core->base + __sd_reg(intstatus),
 				   local_hostintmask, NULL);
 
-		sdio_release_host(sdiodev->func[1]);
+		sdio_release_host(sdiodev->func1);
 	}
 	/* Clear the data packet queues */
 	brcmu_pktq_flush(&bus->txq, true, NULL, NULL);
@@ -2511,7 +2512,7 @@ static void brcmf_sdio_dpc(struct brcmf_sdio *bus)
 
 	brcmf_dbg(TRACE, "Enter\n");
 
-	sdio_claim_host(bus->sdiodev->func[1]);
+	sdio_claim_host(bus->sdiodev->func1);
 
 	/* If waiting for HTAVAIL, check status */
 	if (!bus->sr_enabled && bus->clkstate == CLK_PENDING) {
@@ -2577,7 +2578,7 @@ static void brcmf_sdio_dpc(struct brcmf_sdio *bus)
 		intstatus |= brcmf_sdio_hostmail(bus);
 	}
 
-	sdio_release_host(bus->sdiodev->func[1]);
+	sdio_release_host(bus->sdiodev->func1);
 
 	/* Generally don't ask for these, can get CRC errors... */
 	if (intstatus & I_WR_OOSYNC) {
@@ -2620,7 +2621,7 @@ static void brcmf_sdio_dpc(struct brcmf_sdio *bus)
 
 	if (bus->ctrl_frame_stat && (bus->clkstate == CLK_AVAIL) &&
 	    data_ok(bus)) {
-		sdio_claim_host(bus->sdiodev->func[1]);
+		sdio_claim_host(bus->sdiodev->func1);
 		if (bus->ctrl_frame_stat) {
 			err = brcmf_sdio_tx_ctrlframe(bus,  bus->ctrl_frame_buf,
 						      bus->ctrl_frame_len);
@@ -2628,7 +2629,7 @@ static void brcmf_sdio_dpc(struct brcmf_sdio *bus)
 			wmb();
 			bus->ctrl_frame_stat = false;
 		}
-		sdio_release_host(bus->sdiodev->func[1]);
+		sdio_release_host(bus->sdiodev->func1);
 		brcmf_sdio_wait_event_wakeup(bus);
 	}
 	/* Send queued frames (limit 1 if rx may still be pending) */
@@ -2644,14 +2645,14 @@ static void brcmf_sdio_dpc(struct brcmf_sdio *bus)
 		brcmf_err("failed backplane access over SDIO, halting operation\n");
 		atomic_set(&bus->intstatus, 0);
 		if (bus->ctrl_frame_stat) {
-			sdio_claim_host(bus->sdiodev->func[1]);
+			sdio_claim_host(bus->sdiodev->func1);
 			if (bus->ctrl_frame_stat) {
 				bus->ctrl_frame_err = -ENODEV;
 				wmb();
 				bus->ctrl_frame_stat = false;
 				brcmf_sdio_wait_event_wakeup(bus);
 			}
-			sdio_release_host(bus->sdiodev->func[1]);
+			sdio_release_host(bus->sdiodev->func1);
 		}
 	} else if (atomic_read(&bus->intstatus) ||
 		   atomic_read(&bus->ipend) > 0 ||
@@ -2866,13 +2867,13 @@ brcmf_sdio_bus_txctl(struct device *dev, unsigned char *msg, uint msglen)
 					 CTL_DONE_TIMEOUT);
 	ret = 0;
 	if (bus->ctrl_frame_stat) {
-		sdio_claim_host(bus->sdiodev->func[1]);
+		sdio_claim_host(bus->sdiodev->func1);
 		if (bus->ctrl_frame_stat) {
 			brcmf_dbg(SDIO, "ctrl_frame timeout\n");
 			bus->ctrl_frame_stat = false;
 			ret = -ETIMEDOUT;
 		}
-		sdio_release_host(bus->sdiodev->func[1]);
+		sdio_release_host(bus->sdiodev->func1);
 	}
 	if (!ret) {
 		brcmf_dbg(SDIO, "ctrl_frame complete, err=%d\n",
@@ -2996,7 +2997,7 @@ static int brcmf_sdio_assert_info(struct seq_file *seq, struct brcmf_sdio *bus,
 		return 0;
 	}
 
-	sdio_claim_host(bus->sdiodev->func[1]);
+	sdio_claim_host(bus->sdiodev->func1);
 	if (sh->assert_file_addr != 0) {
 		error = brcmf_sdiod_ramrw(bus->sdiodev, false,
 					  sh->assert_file_addr, (u8 *)file, 80);
@@ -3009,7 +3010,7 @@ static int brcmf_sdio_assert_info(struct seq_file *seq, struct brcmf_sdio *bus,
 		if (error < 0)
 			return error;
 	}
-	sdio_release_host(bus->sdiodev->func[1]);
+	sdio_release_host(bus->sdiodev->func1);
 
 	seq_printf(seq, "dongle assert: %s:%d: assert(%s)\n",
 		   file, sh->assert_line, expr);
@@ -3283,7 +3284,7 @@ static int brcmf_sdio_download_firmware(struct brcmf_sdio *bus,
 	int bcmerror;
 	u32 rstvec;
 
-	sdio_claim_host(bus->sdiodev->func[1]);
+	sdio_claim_host(bus->sdiodev->func1);
 	brcmf_sdio_clkctl(bus, CLK_AVAIL, false);
 
 	rstvec = get_unaligned_le32(fw->data);
@@ -3312,7 +3313,7 @@ static int brcmf_sdio_download_firmware(struct brcmf_sdio *bus,
 
 err:
 	brcmf_sdio_clkctl(bus, CLK_SDONLY, false);
-	sdio_release_host(bus->sdiodev->func[1]);
+	sdio_release_host(bus->sdiodev->func1);
 	return bcmerror;
 }
 
@@ -3426,7 +3427,7 @@ static int brcmf_sdio_bus_preinit(struct device *dev)
 	if (sdiodev->sg_support) {
 		bus->txglom = false;
 		value = 1;
-		pad_size = bus->sdiodev->func[2]->cur_blksize << 1;
+		pad_size = bus->sdiodev->func2->cur_blksize << 1;
 		err = brcmf_iovar_data_set(bus->sdiodev->dev, "bus:rxglom",
 					   &value, sizeof(u32));
 		if (err < 0) {
@@ -3468,7 +3469,7 @@ static int brcmf_sdio_bus_get_memdump(struct device *dev, void *data,
 
 	address = bus->ci->rambase;
 	offset = err = 0;
-	sdio_claim_host(sdiodev->func[1]);
+	sdio_claim_host(sdiodev->func1);
 	while (offset < mem_size) {
 		len = ((offset + MEMBLOCK) < mem_size) ? MEMBLOCK :
 		      mem_size - offset;
@@ -3484,7 +3485,7 @@ static int brcmf_sdio_bus_get_memdump(struct device *dev, void *data,
 	}
 
 done:
-	sdio_release_host(sdiodev->func[1]);
+	sdio_release_host(sdiodev->func1);
 	return err;
 }
 
@@ -3541,11 +3542,10 @@ static void brcmf_sdio_bus_watchdog(struct brcmf_sdio *bus)
 			if (!bus->dpc_triggered) {
 				u8 devpend;
 
-				sdio_claim_host(bus->sdiodev->func[1]);
+				sdio_claim_host(bus->sdiodev->func1);
 				devpend = brcmf_sdiod_func0_rb(bus->sdiodev,
-							       SDIO_CCCR_INTx,
-							       NULL);
-				sdio_release_host(bus->sdiodev->func[1]);
+						  SDIO_CCCR_INTx, NULL);
+				sdio_release_host(bus->sdiodev->func1);
 				intstatus = devpend & (INTR_STATUS_FUNC1 |
 						       INTR_STATUS_FUNC2);
 			}
@@ -3571,13 +3571,13 @@ static void brcmf_sdio_bus_watchdog(struct brcmf_sdio *bus)
 		bus->console.count += jiffies_to_msecs(BRCMF_WD_POLL);
 		if (bus->console.count >= bus->console_interval) {
 			bus->console.count -= bus->console_interval;
-			sdio_claim_host(bus->sdiodev->func[1]);
+			sdio_claim_host(bus->sdiodev->func1);
 			/* Make sure backplane clock is on */
 			brcmf_sdio_bus_sleep(bus, false, false);
 			if (brcmf_sdio_readconsole(bus) < 0)
 				/* stop on error */
 				bus->console_interval = 0;
-			sdio_release_host(bus->sdiodev->func[1]);
+			sdio_release_host(bus->sdiodev->func1);
 		}
 	}
 #endif				/* DEBUG */
@@ -3590,11 +3590,11 @@ static void brcmf_sdio_bus_watchdog(struct brcmf_sdio *bus)
 			bus->idlecount++;
 			if (bus->idlecount > bus->idletime) {
 				brcmf_dbg(SDIO, "idle\n");
-				sdio_claim_host(bus->sdiodev->func[1]);
+				sdio_claim_host(bus->sdiodev->func1);
 				brcmf_sdio_wd_timer(bus, false);
 				bus->idlecount = 0;
 				brcmf_sdio_bus_sleep(bus, true, false);
-				sdio_release_host(bus->sdiodev->func[1]);
+				sdio_release_host(bus->sdiodev->func1);
 			}
 		} else {
 			bus->idlecount = 0;
@@ -3766,9 +3766,9 @@ static u32 brcmf_sdio_buscore_read32(void *ctx, u32 addr)
 	/* Force 4339 chips over rev2 to use the same ID */
 	/* This is borderline tolerable whilst there is only two exceptions */
 	/* But could be handled better */
-	if (addr == CORE_CC_REG(SI_ENUM_BASE, chipid) && 
-	    (sdiodev->func[1]->device == SDIO_DEVICE_ID_BROADCOM_4339 ||
-	     sdiodev->func[1]->device == SDIO_DEVICE_ID_BROADCOM_4335_4339)) {
+	if (addr == CORE_CC_REG(SI_ENUM_BASE, chipid) &&
+	    (sdiodev->func1->device == SDIO_DEVICE_ID_BROADCOM_4339 ||
+	     sdiodev->func1->device == SDIO_DEVICE_ID_BROADCOM_4335_4339)) {
 
 		rev = (val & CID_REV_MASK) >> CID_REV_SHIFT;
 
@@ -3806,7 +3806,7 @@ brcmf_sdio_probe_attach(struct brcmf_sdio *bus)
 	u32 drivestrength;
 
 	sdiodev = bus->sdiodev;
-	sdio_claim_host(sdiodev->func[1]);
+	sdio_claim_host(sdiodev->func1);
 
 	pr_debug("F1 signature read @0x18000000=0x%4x\n",
 		 brcmf_sdiod_readl(sdiodev, SI_ENUM_BASE, NULL));
@@ -3873,8 +3873,8 @@ brcmf_sdio_probe_attach(struct brcmf_sdio *bus)
 	/* wowl can be supported when KEEP_POWER is true and (WAKE_SDIO_IRQ
 	 * is true or when platform data OOB irq is true).
 	 */
-	if ((sdio_get_host_pm_caps(sdiodev->func[1]) & MMC_PM_KEEP_POWER) &&
-	    ((sdio_get_host_pm_caps(sdiodev->func[1]) & MMC_PM_WAKE_SDIO_IRQ) ||
+	if ((sdio_get_host_pm_caps(sdiodev->func1) & MMC_PM_KEEP_POWER) &&
+	    ((sdio_get_host_pm_caps(sdiodev->func1) & MMC_PM_WAKE_SDIO_IRQ) ||
 	     (sdiodev->settings->bus.sdio.oob_irq_supported)))
 		sdiodev->bus_if->wowl_supported = true;
 #endif
@@ -3913,7 +3913,7 @@ brcmf_sdio_probe_attach(struct brcmf_sdio *bus)
 	if (err)
 		goto fail;
 
-	sdio_release_host(sdiodev->func[1]);
+	sdio_release_host(sdiodev->func1);
 
 	brcmu_pktq_init(&bus->txq, (PRIOMASK + 1), TXQLEN);
 
@@ -3934,7 +3934,7 @@ brcmf_sdio_probe_attach(struct brcmf_sdio *bus)
 	return true;
 
 fail:
-	sdio_release_host(sdiodev->func[1]);
+	sdio_release_host(sdiodev->func1);
 	return false;
 }
 
@@ -4021,7 +4021,7 @@ static void brcmf_sdio_firmware_callback(struct device *dev, int err,
 	bus->sdcnt.tickcnt = 0;
 	brcmf_sdio_wd_timer(bus, true);
 
-	sdio_claim_host(sdiodev->func[1]);
+	sdio_claim_host(sdiodev->func1);
 
 	/* Make sure backplane clock is on, needed to generate F2 interrupt */
 	brcmf_sdio_clkctl(bus, CLK_AVAIL, false);
@@ -4043,7 +4043,7 @@ static void brcmf_sdio_firmware_callback(struct device *dev, int err,
 	brcmf_sdiod_writel(sdiod, core->base + __sd_reg(tosbmailboxdata),
 			   SDPCM_PROT_VERSION << SMB_DATA_VERSION_SHIFT, NULL);
 
-	err = sdio_enable_func(sdiodev->func[2]);
+	err = sdio_enable_func(sdiodev->func2);
 
 	brcmf_dbg(INFO, "enable F2: err=%d\n", err);
 
@@ -4058,7 +4058,7 @@ static void brcmf_sdio_firmware_callback(struct device *dev, int err,
 		brcmf_sdiod_writeb(sdiodev, SBSDIO_WATERMARK, 8, &err);
 	} else {
 		/* Disable F2 again */
-		sdio_disable_func(sdiodev->func[2]);
+		sdio_disable_func(sdiodev->func2);
 		goto release;
 	}
 
@@ -4082,7 +4082,7 @@ static void brcmf_sdio_firmware_callback(struct device *dev, int err,
 	if (err != 0)
 		brcmf_sdio_clkctl(bus, CLK_NONE, false);
 
-	sdio_release_host(sdiodev->func[1]);
+	sdio_release_host(sdiodev->func1);
 
 	err = brcmf_bus_started(dev);
 	if (err != 0) {
@@ -4092,11 +4092,11 @@ static void brcmf_sdio_firmware_callback(struct device *dev, int err,
 	return;
 
 release:
-	sdio_release_host(sdiodev->func[1]);
+	sdio_release_host(sdiodev->func1);
 fail:
 	brcmf_dbg(TRACE, "failed: dev=%s, err=%d\n", dev_name(dev), err);
 	device_release_driver(dev);
-	device_release_driver(&sdiodev->func[2]->dev);
+	device_release_driver(&sdiodev->func2->dev);
 }
 
 struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev)
@@ -4122,7 +4122,7 @@ struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev)
 
 	/* single-threaded workqueue */
 	wq = alloc_ordered_workqueue("brcmf_wq/%s", WQ_MEM_RECLAIM,
-				     dev_name(&sdiodev->func[1]->dev));
+				     dev_name(&sdiodev->func1->dev));
 	if (!wq) {
 		brcmf_err("insufficient memory to create txworkqueue\n");
 		goto fail;
@@ -4151,7 +4151,7 @@ struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev)
 	init_completion(&bus->watchdog_wait);
 	bus->watchdog_tsk = kthread_run(brcmf_sdio_watchdog_thread,
 					bus, "brcmf_wdog/%s",
-					dev_name(&sdiodev->func[1]->dev));
+					dev_name(&sdiodev->func1->dev));
 	if (IS_ERR(bus->watchdog_tsk)) {
 		pr_warn("brcmf_watchdog thread failed to start\n");
 		bus->watchdog_tsk = NULL;
@@ -4177,7 +4177,7 @@ struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev)
 	}
 
 	/* Query the F2 block size, set roundup accordingly */
-	bus->blocksize = bus->sdiodev->func[2]->cur_blksize;
+	bus->blocksize = bus->sdiodev->func2->cur_blksize;
 	bus->roundup = min(max_roundup, bus->blocksize);
 
 	/* Allocate buffers */
@@ -4193,17 +4193,17 @@ struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev)
 		}
 	}
 
-	sdio_claim_host(bus->sdiodev->func[1]);
+	sdio_claim_host(bus->sdiodev->func1);
 
 	/* Disable F2 to clear any intermediate frame state on the dongle */
-	sdio_disable_func(bus->sdiodev->func[2]);
+	sdio_disable_func(bus->sdiodev->func2);
 
 	bus->rxflow = false;
 
 	/* Done with backplane-dependent accesses, can drop clock... */
 	brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, 0, NULL);
 
-	sdio_release_host(bus->sdiodev->func[1]);
+	sdio_release_host(bus->sdiodev->func1);
 
 	/* ...and initialize clock/power states */
 	bus->clkstate = CLK_SDONLY;
@@ -4255,7 +4255,7 @@ void brcmf_sdio_remove(struct brcmf_sdio *bus)
 
 		if (bus->ci) {
 			if (bus->sdiodev->state != BRCMF_SDIOD_NOMEDIUM) {
-				sdio_claim_host(bus->sdiodev->func[1]);
+				sdio_claim_host(bus->sdiodev->func1);
 				brcmf_sdio_wd_timer(bus, false);
 				brcmf_sdio_clkctl(bus, CLK_AVAIL, false);
 				/* Leave the device in state where it is
@@ -4265,7 +4265,7 @@ void brcmf_sdio_remove(struct brcmf_sdio *bus)
 				msleep(20);
 				brcmf_chip_set_passive(bus->ci);
 				brcmf_sdio_clkctl(bus, CLK_NONE, false);
-				sdio_release_host(bus->sdiodev->func[1]);
+				sdio_release_host(bus->sdiodev->func1);
 			}
 			brcmf_chip_detach(bus->ci);
 		}
@@ -4312,9 +4312,9 @@ int brcmf_sdio_sleep(struct brcmf_sdio *bus, bool sleep)
 {
 	int ret;
 
-	sdio_claim_host(bus->sdiodev->func[1]);
+	sdio_claim_host(bus->sdiodev->func1);
 	ret = brcmf_sdio_bus_sleep(bus, sleep, false);
-	sdio_release_host(bus->sdiodev->func[1]);
+	sdio_release_host(bus->sdiodev->func1);
 
 	return ret;
 }
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
index 04661ecbf395..7faed831f07d 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
@@ -21,9 +21,6 @@
 #include <linux/firmware.h>
 #include "firmware.h"
 
-/* Maximum number of I/O funcs */
-#define NUM_SDIO_FUNCS	3
-
 #define SDIOD_FBR_SIZE		0x100
 
 /* io_en */
@@ -173,8 +170,8 @@ struct brcmf_sdio;
 struct brcmf_sdiod_freezer;
 
 struct brcmf_sdio_dev {
-	struct sdio_func *func[NUM_SDIO_FUNCS];
-	u8 num_funcs;			/* Supported funcs on client */
+	struct sdio_func *func1;
+	struct sdio_func *func2;
 	u32 sbwad;			/* Save backplane window address */
 	struct brcmf_core *cc_core;	/* chipcommon core info struct */
 	struct brcmf_sdio *bus;
@@ -295,17 +292,17 @@ void brcmf_sdiod_intr_unregister(struct brcmf_sdio_dev *sdiodev);
 /* SDIO device register access interface */
 /* Accessors for SDIO Function 0 */
 #define brcmf_sdiod_func0_rb(sdiodev, addr, r) \
-	sdio_f0_readb((sdiodev)->func[1], (addr), (r))
+	sdio_f0_readb((sdiodev)->func1, (addr), (r))
 
 #define brcmf_sdiod_func0_wb(sdiodev, addr, v, ret) \
-	sdio_f0_writeb((sdiodev)->func[1], (v), (addr), (ret))
+	sdio_f0_writeb((sdiodev)->func1, (v), (addr), (ret))
 
 /* Accessors for SDIO Function 1 */
 #define brcmf_sdiod_readb(sdiodev, addr, r) \
-	sdio_readb((sdiodev)->func[1], (addr), (r))
+	sdio_readb((sdiodev)->func1, (addr), (r))
 
 #define brcmf_sdiod_writeb(sdiodev, addr, v, ret) \
-	sdio_writeb((sdiodev)->func[1], (v), (addr), (ret))
+	sdio_writeb((sdiodev)->func1, (v), (addr), (ret))
 
 u32 brcmf_sdiod_readl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret);
 void brcmf_sdiod_writel(struct brcmf_sdio_dev *sdiodev, u32 addr, u32 data,
-- 
2.11.0

[PATCH 30/30] brcmfmac: Reduce the noise from repeatedly dereferencing common pointers

[Ian Molton]

This introduces no functional changes, but makes the code drastically more
readable, reducing the amount of dereferencing performed inside functions
throughout the SDIO core.

For example, reduce:
	sdio_release_host(bus->sdiodev->func1);
to:
	sdio_release_host(func1);

Fixup a few inconsistently named pointers whilst we are at it ie.

sdiod -> sdiodev

Signed-off-by: Ian Molton <ian@mnementh.co.uk>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
---
 .../wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c  | 140 +++----
 .../wireless/broadcom/brcm80211/brcmfmac/sdio.c    | 406 +++++++++++----------
 2 files changed, 293 insertions(+), 253 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
index 4080085ef44b..106f92372396 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
@@ -105,6 +105,8 @@ static void brcmf_sdiod_dummy_irqhandler(struct sdio_func *func)
 int brcmf_sdiod_intr_register(struct brcmf_sdio_dev *sdiodev)
 {
 	struct brcmfmac_sdio_pd *pdata;
+	struct sdio_func *func1 = sdiodev->func1;
+	struct sdio_func *func2 = sdiodev->func2;
 	int ret = 0;
 	u8 data;
 	u32 addr, gpiocontrol;
@@ -118,7 +120,7 @@ int brcmf_sdiod_intr_register(struct brcmf_sdio_dev *sdiodev)
 
 		ret = request_irq(pdata->oob_irq_nr, brcmf_sdiod_oob_irqhandler,
 				  pdata->oob_irq_flags, "brcmf_oob_intr",
-				  &sdiodev->func1->dev);
+				  &func1->dev);
 		if (ret != 0) {
 			brcmf_err("request_irq failed %d\n", ret);
 			return ret;
@@ -132,7 +134,7 @@ int brcmf_sdiod_intr_register(struct brcmf_sdio_dev *sdiodev)
 		}
 		sdiodev->irq_wake = true;
 
-		sdio_claim_host(sdiodev->func1);
+		sdio_claim_host(func1);
 
 		if (sdiodev->bus_if->chip == BRCM_CC_43362_CHIP_ID) {
 			/* assign GPIO to SDIO core */
@@ -157,13 +159,13 @@ int brcmf_sdiod_intr_register(struct brcmf_sdio_dev *sdiodev)
 		if (pdata->oob_irq_flags & IRQF_TRIGGER_HIGH)
 			data |= SDIO_CCCR_BRCM_SEPINT_ACT_HI;
 		brcmf_sdiod_func0_wb(sdiodev, SDIO_CCCR_BRCM_SEPINT, data, &ret);
-		sdio_release_host(sdiodev->func1);
+		sdio_release_host(func1);
 	} else {
 		brcmf_dbg(SDIO, "Entering\n");
-		sdio_claim_host(sdiodev->func1);
-		sdio_claim_irq(sdiodev->func1, brcmf_sdiod_ib_irqhandler);
-		sdio_claim_irq(sdiodev->func2, brcmf_sdiod_dummy_irqhandler);
-		sdio_release_host(sdiodev->func1);
+		sdio_claim_host(func1);
+		sdio_claim_irq(func1, brcmf_sdiod_ib_irqhandler);
+		sdio_claim_irq(func2, brcmf_sdiod_dummy_irqhandler);
+		sdio_release_host(func1);
 		sdiodev->sd_irq_requested = true;
 	}
 
@@ -172,6 +174,8 @@ int brcmf_sdiod_intr_register(struct brcmf_sdio_dev *sdiodev)
 
 void brcmf_sdiod_intr_unregister(struct brcmf_sdio_dev *sdiodev)
 {
+	struct sdio_func *func1 = sdiodev->func1;
+	struct sdio_func *func2 = sdiodev->func2;
 
 	brcmf_dbg(SDIO, "Entering oob=%d sd=%d\n",
 		  sdiodev->oob_irq_requested,
@@ -181,26 +185,26 @@ void brcmf_sdiod_intr_unregister(struct brcmf_sdio_dev *sdiodev)
 		struct brcmfmac_sdio_pd *pdata;
 
 		pdata = &sdiodev->settings->bus.sdio;
-		sdio_claim_host(sdiodev->func1);
+		sdio_claim_host(func1);
 		brcmf_sdiod_func0_wb(sdiodev, SDIO_CCCR_BRCM_SEPINT, 0, NULL);
 		brcmf_sdiod_func0_wb(sdiodev, SDIO_CCCR_IENx, 0, NULL);
-		sdio_release_host(sdiodev->func1);
+		sdio_release_host(func1);
 
 		sdiodev->oob_irq_requested = false;
 		if (sdiodev->irq_wake) {
 			disable_irq_wake(pdata->oob_irq_nr);
 			sdiodev->irq_wake = false;
 		}
-		free_irq(pdata->oob_irq_nr, &sdiodev->func1->dev);
+		free_irq(pdata->oob_irq_nr, &func1->dev);
 		sdiodev->irq_en = false;
 		sdiodev->oob_irq_requested = false;
 	}
 
 	if (sdiodev->sd_irq_requested) {
-		sdio_claim_host(sdiodev->func1);
-		sdio_release_irq(sdiodev->func2);
-		sdio_release_irq(sdiodev->func1);
-		sdio_release_host(sdiodev->func1);
+		sdio_claim_host(func1);
+		sdio_release_irq(func2);
+		sdio_release_irq(func1);
+		sdio_release_host(func1);
 		sdiodev->sd_irq_requested = false;
 	}
 }
@@ -252,6 +256,7 @@ brcmf_sdiod_set_backplane_window(struct brcmf_sdio_dev *sdiodev, u32 addr)
 
 u32 brcmf_sdiod_readl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret)
 {
+	struct sdio_func *func1 = sdiodev->func1;
 	u32 data = 0;
 	int retval;
 
@@ -262,7 +267,7 @@ u32 brcmf_sdiod_readl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret)
 	addr &= SBSDIO_SB_OFT_ADDR_MASK;
 	addr |= SBSDIO_SB_ACCESS_2_4B_FLAG;
 
-	data = sdio_readl(sdiodev->func1, addr, &retval);
+	data = sdio_readl(func1, addr, &retval);
 
 out:
 	if (ret)
@@ -274,6 +279,7 @@ u32 brcmf_sdiod_readl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret)
 void brcmf_sdiod_writel(struct brcmf_sdio_dev *sdiodev, u32 addr,
 			u32 data, int *ret)
 {
+	struct sdio_func *func1 = sdiodev->func1;
 	int retval;
 
 	retval = brcmf_sdiod_set_backplane_window(sdiodev, addr);
@@ -283,7 +289,7 @@ void brcmf_sdiod_writel(struct brcmf_sdio_dev *sdiodev, u32 addr,
 	addr &= SBSDIO_SB_OFT_ADDR_MASK;
 	addr |= SBSDIO_SB_ACCESS_2_4B_FLAG;
 
-	sdio_writel(sdiodev->func1, data, addr, &retval);
+	sdio_writel(func1, data, addr, &retval);
 
 out:
 	if (ret)
@@ -534,6 +540,7 @@ int brcmf_sdiod_recv_buf(struct brcmf_sdio_dev *sdiodev, u8 *buf, uint nbytes)
 
 int brcmf_sdiod_recv_pkt(struct brcmf_sdio_dev *sdiodev, struct sk_buff *pkt)
 {
+	struct sdio_func *func2 = sdiodev->func2;
 	u32 addr = sdiodev->cc_core->base;
 	int err = 0;
 
@@ -546,7 +553,7 @@ int brcmf_sdiod_recv_pkt(struct brcmf_sdio_dev *sdiodev, struct sk_buff *pkt)
 	addr &= SBSDIO_SB_OFT_ADDR_MASK;
 	addr |= SBSDIO_SB_ACCESS_2_4B_FLAG;
 
-	err = brcmf_sdiod_buff_read(sdiodev, sdiodev->func2, addr, pkt);
+	err = brcmf_sdiod_buff_read(sdiodev, func2, addr, pkt);
 
 done:
 	return err;
@@ -555,6 +562,7 @@ int brcmf_sdiod_recv_pkt(struct brcmf_sdio_dev *sdiodev, struct sk_buff *pkt)
 int brcmf_sdiod_recv_chain(struct brcmf_sdio_dev *sdiodev,
 			   struct sk_buff_head *pktq, uint totlen)
 {
+	struct sdio_func *func2 = sdiodev->func2;
 	struct sk_buff *glom_skb = NULL;
 	struct sk_buff *skb;
 	u32 addr = sdiodev->cc_core->base;
@@ -571,14 +579,12 @@ int brcmf_sdiod_recv_chain(struct brcmf_sdio_dev *sdiodev,
 	addr |= SBSDIO_SB_ACCESS_2_4B_FLAG;
 
 	if (pktq->qlen == 1)
-		err = brcmf_sdiod_buff_read(sdiodev, sdiodev->func2, addr,
-					    pktq->next);
+		err = brcmf_sdiod_buff_read(sdiodev, func2, addr, pktq->next);
 	else if (!sdiodev->sg_support) {
 		glom_skb = brcmu_pkt_buf_get_skb(totlen);
 		if (!glom_skb)
 			return -ENOMEM;
-		err = brcmf_sdiod_buff_read(sdiodev, sdiodev->func2, addr,
-					    glom_skb);
+		err = brcmf_sdiod_buff_read(sdiodev, func2, addr, glom_skb);
 		if (err)
 			goto done;
 
@@ -587,8 +593,7 @@ int brcmf_sdiod_recv_chain(struct brcmf_sdio_dev *sdiodev,
 			skb_pull(glom_skb, skb->len);
 		}
 	} else
-		err = brcmf_sdiod_sglist_rw(sdiodev, sdiodev->func2, false,
-					    addr, pktq);
+		err = brcmf_sdiod_sglist_rw(sdiodev, func2, false, addr, pktq);
 
 done:
 	brcmu_pkt_buf_free_skb(glom_skb);
@@ -598,6 +603,7 @@ int brcmf_sdiod_recv_chain(struct brcmf_sdio_dev *sdiodev,
 int brcmf_sdiod_send_buf(struct brcmf_sdio_dev *sdiodev, u8 *buf, uint nbytes)
 {
 	struct sk_buff *mypkt;
+	struct sdio_func *func2 = sdiodev->func2;
 	u32 addr = sdiodev->cc_core->base;
 	int err;
 
@@ -619,8 +625,7 @@ int brcmf_sdiod_send_buf(struct brcmf_sdio_dev *sdiodev, u8 *buf, uint nbytes)
 	addr |= SBSDIO_SB_ACCESS_2_4B_FLAG;
 
 	if (!err)
-		err = brcmf_sdiod_buff_write(sdiodev, sdiodev->func2, addr,
-					     mypkt);
+		err = brcmf_sdiod_buff_write(sdiodev, func2, addr, mypkt);
 
 	brcmu_pkt_buf_free_skb(mypkt);
 
@@ -631,6 +636,7 @@ int brcmf_sdiod_send_pkt(struct brcmf_sdio_dev *sdiodev,
 			 struct sk_buff_head *pktq)
 {
 	struct sk_buff *skb;
+	struct sdio_func *func2 = sdiodev->func2;
 	u32 addr = sdiodev->cc_core->base;
 	int err;
 
@@ -645,14 +651,12 @@ int brcmf_sdiod_send_pkt(struct brcmf_sdio_dev *sdiodev,
 
 	if (pktq->qlen == 1 || !sdiodev->sg_support) {
 		skb_queue_walk(pktq, skb) {
-			err = brcmf_sdiod_buff_write(sdiodev, sdiodev->func2,
-						     addr, skb);
+			err = brcmf_sdiod_buff_write(sdiodev, func2, addr, skb);
 			if (err)
 				break;
 		}
 	} else {
-		err = brcmf_sdiod_sglist_rw(sdiodev, sdiodev->func2, true,
-					    addr, pktq);
+		err = brcmf_sdiod_sglist_rw(sdiodev, func2, true, addr, pktq);
 	}
 
 	return err;
@@ -662,6 +666,7 @@ int
 brcmf_sdiod_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address,
 		  u8 *data, uint size)
 {
+	struct sdio_func *func1 = sdiodev->func1;
 	int err = 0;
 	struct sk_buff *pkt;
 	u32 sdaddr;
@@ -682,7 +687,7 @@ brcmf_sdiod_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address,
 	else
 		dsize = size;
 
-	sdio_claim_host(sdiodev->func1);
+	sdio_claim_host(func1);
 
 	/* Do the transfer(s) */
 	while (size) {
@@ -702,11 +707,9 @@ brcmf_sdiod_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address,
 
 		if (write) {
 			memcpy(pkt->data, data, dsize);
-			err = brcmf_sdiod_buff_write(sdiodev, sdiodev->func1,
-						     sdaddr, pkt);
+			err = brcmf_sdiod_buff_write(sdiodev, func1, sdaddr, pkt);
 		} else {
-			err = brcmf_sdiod_buff_read(sdiodev, sdiodev->func1,
-						    sdaddr, pkt);
+			err = brcmf_sdiod_buff_read(sdiodev, func1, sdaddr, pkt);
 		}
 
 		if (err) {
@@ -729,7 +732,7 @@ brcmf_sdiod_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address,
 
 	dev_kfree_skb(pkt);
 
-	sdio_release_host(sdiodev->func1);
+	sdio_release_host(func1);
 
 	return err;
 }
@@ -747,18 +750,16 @@ int brcmf_sdiod_abort(struct brcmf_sdio_dev *sdiodev, struct sdio_func *func)
 
 void brcmf_sdiod_sgtable_alloc(struct brcmf_sdio_dev *sdiodev)
 {
-	struct sdio_func *func;
-	struct mmc_host *host;
+	struct sdio_func *func2 = sdiodev->func2;
+	struct mmc_host *host = func2->card->host;
 	uint max_blocks;
 	uint nents;
 	int err;
 
-	func = sdiodev->func2;
-	host = func->card->host;
 	sdiodev->sg_support = host->max_segs > 1;
 	max_blocks = min_t(uint, host->max_blk_count, 511u);
 	sdiodev->max_request_size = min_t(uint, host->max_req_size,
-					  max_blocks * func->cur_blksize);
+					  max_blocks * func2->cur_blksize);
 	sdiodev->max_segment_count = min_t(uint, host->max_segs,
 					   SG_MAX_SINGLE_ALLOC);
 	sdiodev->max_segment_size = host->max_seg_size;
@@ -805,6 +806,7 @@ static void brcmf_sdiod_freezer_detach(struct brcmf_sdio_dev *sdiodev)
 
 static int brcmf_sdiod_freezer_on(struct brcmf_sdio_dev *sdiodev)
 {
+	struct sdio_func *func1 = sdiodev->func1;
 	atomic_t *expect = &sdiodev->freezer->thread_count;
 	int res = 0;
 
@@ -814,17 +816,19 @@ static int brcmf_sdiod_freezer_on(struct brcmf_sdio_dev *sdiodev)
 	brcmf_sdio_trigger_dpc(sdiodev->bus);
 	wait_event(sdiodev->freezer->thread_freeze,
 		   atomic_read(expect) == sdiodev->freezer->frozen_count);
-	sdio_claim_host(sdiodev->func1);
+	sdio_claim_host(func1);
 	res = brcmf_sdio_sleep(sdiodev->bus, true);
-	sdio_release_host(sdiodev->func1);
+	sdio_release_host(func1);
 	return res;
 }
 
 static void brcmf_sdiod_freezer_off(struct brcmf_sdio_dev *sdiodev)
 {
-	sdio_claim_host(sdiodev->func1);
+	struct sdio_func *func1 = sdiodev->func1;
+
+	sdio_claim_host(func1);
 	brcmf_sdio_sleep(sdiodev->bus, false);
-	sdio_release_host(sdiodev->func1);
+	sdio_release_host(func1);
 	atomic_set(&sdiodev->freezer->freezing, 0);
 	complete_all(&sdiodev->freezer->resumed);
 }
@@ -865,6 +869,9 @@ static void brcmf_sdiod_freezer_detach(struct brcmf_sdio_dev *sdiodev)
 
 static int brcmf_sdiod_remove(struct brcmf_sdio_dev *sdiodev)
 {
+	struct sdio_func *func1 = sdiodev->func1;
+	struct sdio_func *func2 = sdiodev->func2;
+
 	sdiodev->state = BRCMF_SDIOD_DOWN;
 	if (sdiodev->bus) {
 		brcmf_sdio_remove(sdiodev->bus);
@@ -874,19 +881,19 @@ static int brcmf_sdiod_remove(struct brcmf_sdio_dev *sdiodev)
 	brcmf_sdiod_freezer_detach(sdiodev);
 
 	/* Disable Function 2 */
-	sdio_claim_host(sdiodev->func2);
-	sdio_disable_func(sdiodev->func2);
-	sdio_release_host(sdiodev->func2);
+	sdio_claim_host(func2);
+	sdio_disable_func(func2);
+	sdio_release_host(func2);
 
 	/* Disable Function 1 */
-	sdio_claim_host(sdiodev->func1);
-	sdio_disable_func(sdiodev->func1);
-	sdio_release_host(sdiodev->func1);
+	sdio_claim_host(func1);
+	sdio_disable_func(func1);
+	sdio_release_host(func1);
 
 	sg_free_table(&sdiodev->sgtable);
 	sdiodev->sbwad = 0;
 
-	pm_runtime_allow(sdiodev->func1->card->host->parent);
+	pm_runtime_allow(func1->card->host->parent);
 	return 0;
 }
 
@@ -900,29 +907,32 @@ static void brcmf_sdiod_host_fixup(struct mmc_host *host)
 
 static int brcmf_sdiod_probe(struct brcmf_sdio_dev *sdiodev)
 {
+	struct sdio_func *func1 = sdiodev->func1;
+	struct sdio_func *func2 = sdiodev->func2;
+
 	int ret = 0;
 
-	sdio_claim_host(sdiodev->func1);
+	sdio_claim_host(func1);
 
-	ret = sdio_set_block_size(sdiodev->func1, SDIO_FUNC1_BLOCKSIZE);
+	ret = sdio_set_block_size(func1, SDIO_FUNC1_BLOCKSIZE);
 	if (ret) {
 		brcmf_err("Failed to set F1 blocksize\n");
-		sdio_release_host(sdiodev->func1);
+		sdio_release_host(func1);
 		goto out;
 	}
-	ret = sdio_set_block_size(sdiodev->func2, SDIO_FUNC2_BLOCKSIZE);
+	ret = sdio_set_block_size(func2, SDIO_FUNC2_BLOCKSIZE);
 	if (ret) {
 		brcmf_err("Failed to set F2 blocksize\n");
-		sdio_release_host(sdiodev->func1);
+		sdio_release_host(func1);
 		goto out;
 	}
 
 	/* increase F2 timeout */
-	sdiodev->func2->enable_timeout = SDIO_WAIT_F2RDY;
+	func2->enable_timeout = SDIO_WAIT_F2RDY;
 
 	/* Enable Function 1 */
-	ret = sdio_enable_func(sdiodev->func1);
-	sdio_release_host(sdiodev->func1);
+	ret = sdio_enable_func(func1);
+	sdio_release_host(func1);
 	if (ret) {
 		brcmf_err("Failed to enable F1: err=%d\n", ret);
 		goto out;
@@ -938,7 +948,8 @@ static int brcmf_sdiod_probe(struct brcmf_sdio_dev *sdiodev)
 		ret = -ENODEV;
 		goto out;
 	}
-	brcmf_sdiod_host_fixup(sdiodev->func2->card->host);
+
+	brcmf_sdiod_host_fixup(func2->card->host);
 out:
 	if (ret)
 		brcmf_sdiod_remove(sdiodev);
@@ -1058,7 +1069,6 @@ static int brcmf_ops_sdio_probe(struct sdio_func *func,
 static void brcmf_ops_sdio_remove(struct sdio_func *func)
 {
 	struct brcmf_bus *bus_if;
-	struct brcmf_sdio_dev *sdiodev;
 
 	brcmf_dbg(SDIO, "Enter\n");
 	brcmf_dbg(SDIO, "sdio vendor ID: 0x%04x\n", func->vendor);
@@ -1067,7 +1077,9 @@ static void brcmf_ops_sdio_remove(struct sdio_func *func)
 
 	bus_if = dev_get_drvdata(&func->dev);
 	if (bus_if) {
-		sdiodev = bus_if->bus_priv.sdio;
+		struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
+		struct sdio_func *func1 = sdiodev->func1;
+		struct sdio_func *func2 = sdiodev->func2;
 
 		/* start by unregistering irqs */
 		brcmf_sdiod_intr_unregister(sdiodev);
@@ -1078,8 +1090,8 @@ static void brcmf_ops_sdio_remove(struct sdio_func *func)
 		/* only proceed with rest of cleanup if func 1 */
 		brcmf_sdiod_remove(sdiodev);
 
-		dev_set_drvdata(&sdiodev->func1->dev, NULL);
-		dev_set_drvdata(&sdiodev->func2->dev, NULL);
+		dev_set_drvdata(&func1->dev, NULL);
+		dev_set_drvdata(&func2->dev, NULL);
 
 		kfree(bus_if);
 		kfree(sdiodev);
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
index b77eb6a6fddc..13db30e3830a 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
@@ -660,6 +660,7 @@ static bool data_ok(struct brcmf_sdio *bus)
 static int
 brcmf_sdio_kso_control(struct brcmf_sdio *bus, bool on)
 {
+	struct brcmf_sdio_dev *sdiodev = bus->sdiodev;
 	u8 wr_val = 0, rd_val, cmp_val, bmask;
 	int err = 0;
 	int err_cnt = 0;
@@ -669,7 +670,7 @@ brcmf_sdio_kso_control(struct brcmf_sdio *bus, bool on)
 
 	wr_val = (on << SBSDIO_FUNC1_SLEEPCSR_KSO_SHIFT);
 	/* 1st KSO write goes to AOS wake up core if device is asleep  */
-	brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, wr_val, &err);
+	brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_SLEEPCSR, wr_val, &err);
 
 	if (on) {
 		/* device WAKEUP through KSO:
@@ -695,8 +696,7 @@ brcmf_sdio_kso_control(struct brcmf_sdio *bus, bool on)
 		 * just one write attempt may fail,
 		 * read it back until it matches written value
 		 */
-		rd_val = brcmf_sdiod_readb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR,
-					   &err);
+		rd_val = brcmf_sdiod_readb(sdiodev, SBSDIO_FUNC1_SLEEPCSR, &err);
 		if (!err) {
 			if ((rd_val & bmask) == cmp_val)
 				break;
@@ -707,9 +707,7 @@ brcmf_sdio_kso_control(struct brcmf_sdio *bus, bool on)
 			break;
 
 		udelay(KSO_WAIT_US);
-		brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, wr_val,
-				   &err);
-
+		brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_SLEEPCSR, wr_val, &err);
 	} while (try_cnt++ < MAX_KSO_ATTEMPTS);
 
 	if (try_cnt > 2)
@@ -727,6 +725,7 @@ brcmf_sdio_kso_control(struct brcmf_sdio *bus, bool on)
 /* Turn backplane clock on or off */
 static int brcmf_sdio_htclk(struct brcmf_sdio *bus, bool on, bool pendok)
 {
+	struct brcmf_sdio_dev *sdiodev = bus->sdiodev;
 	int err;
 	u8 clkctl, clkreq, devctl;
 	unsigned long timeout;
@@ -745,16 +744,14 @@ static int brcmf_sdio_htclk(struct brcmf_sdio *bus, bool on, bool pendok)
 		clkreq =
 		    bus->alp_only ? SBSDIO_ALP_AVAIL_REQ : SBSDIO_HT_AVAIL_REQ;
 
-		brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
-				   clkreq, &err);
+		brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, clkreq, &err);
 		if (err) {
 			brcmf_err("HT Avail request error: %d\n", err);
 			return -EBADE;
 		}
 
 		/* Check current status */
-		clkctl = brcmf_sdiod_readb(bus->sdiodev,
-					   SBSDIO_FUNC1_CHIPCLKCSR, &err);
+		clkctl = brcmf_sdiod_readb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, &err);
 		if (err) {
 			brcmf_err("HT Avail read error: %d\n", err);
 			return -EBADE;
@@ -763,34 +760,34 @@ static int brcmf_sdio_htclk(struct brcmf_sdio *bus, bool on, bool pendok)
 		/* Go to pending and await interrupt if appropriate */
 		if (!SBSDIO_CLKAV(clkctl, bus->alp_only) && pendok) {
 			/* Allow only clock-available interrupt */
-			devctl = brcmf_sdiod_readb(bus->sdiodev,
-						   SBSDIO_DEVICE_CTL, &err);
+			devctl = brcmf_sdiod_readb(sdiodev, SBSDIO_DEVICE_CTL,
+						   &err);
 			if (err) {
 				brcmf_err("Devctl error setting CA: %d\n", err);
 				return -EBADE;
 			}
 
 			devctl |= SBSDIO_DEVCTL_CA_INT_ONLY;
-			brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_DEVICE_CTL,
-					   devctl, &err);
+			brcmf_sdiod_writeb(sdiodev, SBSDIO_DEVICE_CTL, devctl,
+					   &err);
 			brcmf_dbg(SDIO, "CLKCTL: set PENDING\n");
 			bus->clkstate = CLK_PENDING;
 
 			return 0;
 		} else if (bus->clkstate == CLK_PENDING) {
 			/* Cancel CA-only interrupt filter */
-			devctl = brcmf_sdiod_readb(bus->sdiodev,
-						   SBSDIO_DEVICE_CTL, &err);
+			devctl = brcmf_sdiod_readb(sdiodev, SBSDIO_DEVICE_CTL,
+						   &err);
 			devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY;
-			brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_DEVICE_CTL,
-					   devctl, &err);
+			brcmf_sdiod_writeb(sdiodev, SBSDIO_DEVICE_CTL, devctl,
+					   &err);
 		}
 
 		/* Otherwise, wait here (polling) for HT Avail */
 		timeout = jiffies +
 			  msecs_to_jiffies(PMU_MAX_TRANSITION_DLY/1000);
 		while (!SBSDIO_CLKAV(clkctl, bus->alp_only)) {
-			clkctl = brcmf_sdiod_readb(bus->sdiodev,
+			clkctl = brcmf_sdiod_readb(sdiodev,
 						   SBSDIO_FUNC1_CHIPCLKCSR,
 						   &err);
 			if (time_after(jiffies, timeout))
@@ -824,16 +821,15 @@ static int brcmf_sdio_htclk(struct brcmf_sdio *bus, bool on, bool pendok)
 
 		if (bus->clkstate == CLK_PENDING) {
 			/* Cancel CA-only interrupt filter */
-			devctl = brcmf_sdiod_readb(bus->sdiodev,
-						   SBSDIO_DEVICE_CTL, &err);
+			devctl = brcmf_sdiod_readb(sdiodev, SBSDIO_DEVICE_CTL,
+						   &err);
 			devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY;
-			brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_DEVICE_CTL,
-					   devctl, &err);
+			brcmf_sdiod_writeb(sdiodev, SBSDIO_DEVICE_CTL, devctl,
+					   &err);
 		}
 
 		bus->clkstate = CLK_SDONLY;
-		brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
-				   clkreq, &err);
+		brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, clkreq, &err);
 		brcmf_dbg(SDIO, "CLKCTL: turned OFF\n");
 		if (err) {
 			brcmf_err("Failed access turning clock off: %d\n",
@@ -908,6 +904,7 @@ static int brcmf_sdio_clkctl(struct brcmf_sdio *bus, uint target, bool pendok)
 static int
 brcmf_sdio_bus_sleep(struct brcmf_sdio *bus, bool sleep, bool pendok)
 {
+	struct brcmf_sdio_dev *sdiodev = bus->sdiodev;
 	int err = 0;
 	u8 clkcsr;
 
@@ -923,12 +920,12 @@ brcmf_sdio_bus_sleep(struct brcmf_sdio *bus, bool sleep, bool pendok)
 
 		/* Going to sleep */
 		if (sleep) {
-			clkcsr = brcmf_sdiod_readb(bus->sdiodev,
+			clkcsr = brcmf_sdiod_readb(sdiodev,
 						   SBSDIO_FUNC1_CHIPCLKCSR,
 						   &err);
 			if ((clkcsr & SBSDIO_CSR_MASK) == 0) {
 				brcmf_dbg(SDIO, "no clock, set ALP\n");
-				brcmf_sdiod_writeb(bus->sdiodev,
+				brcmf_sdiod_writeb(sdiodev,
 						   SBSDIO_FUNC1_CHIPCLKCSR,
 						   SBSDIO_ALP_AVAIL_REQ, &err);
 			}
@@ -970,13 +967,15 @@ static inline bool brcmf_sdio_valid_shared_address(u32 addr)
 static int brcmf_sdio_readshared(struct brcmf_sdio *bus,
 				 struct sdpcm_shared *sh)
 {
+	struct brcmf_sdio_dev *sdiodev = bus->sdiodev;
+	struct sdio_func *func1 = sdiodev->func1;
 	u32 addr = 0;
 	int rv;
 	u32 shaddr = 0;
 	struct sdpcm_shared_le sh_le;
 	__le32 addr_le;
 
-	sdio_claim_host(bus->sdiodev->func1);
+	sdio_claim_host(func1);
 	brcmf_sdio_bus_sleep(bus, false, false);
 
 	/*
@@ -986,7 +985,7 @@ static int brcmf_sdio_readshared(struct brcmf_sdio *bus,
 	shaddr = bus->ci->rambase + bus->ci->ramsize - 4;
 	if (!bus->ci->rambase && brcmf_chip_sr_capable(bus->ci))
 		shaddr -= bus->ci->srsize;
-	rv = brcmf_sdiod_ramrw(bus->sdiodev, false, shaddr,
+	rv = brcmf_sdiod_ramrw(sdiodev, false, shaddr,
 			       (u8 *)&addr_le, 4);
 	if (rv < 0)
 		goto fail;
@@ -1005,12 +1004,12 @@ static int brcmf_sdio_readshared(struct brcmf_sdio *bus,
 	brcmf_dbg(INFO, "sdpcm_shared address 0x%08X\n", addr);
 
 	/* Read hndrte_shared structure */
-	rv = brcmf_sdiod_ramrw(bus->sdiodev, false, addr, (u8 *)&sh_le,
+	rv = brcmf_sdiod_ramrw(sdiodev, false, addr, (u8 *)&sh_le,
 			       sizeof(struct sdpcm_shared_le));
 	if (rv < 0)
 		goto fail;
 
-	sdio_release_host(bus->sdiodev->func1);
+	sdio_release_host(func1);
 
 	/* Endianness */
 	sh->flags = le32_to_cpu(sh_le.flags);
@@ -1032,7 +1031,7 @@ static int brcmf_sdio_readshared(struct brcmf_sdio *bus,
 fail:
 	brcmf_err("unable to obtain sdpcm_shared info: rv=%d (addr=0x%x)\n",
 		  rv, addr);
-	sdio_release_host(bus->sdiodev->func1);
+	sdio_release_host(func1);
 	return rv;
 }
 
@@ -1051,7 +1050,7 @@ static void brcmf_sdio_get_console_addr(struct brcmf_sdio *bus)
 
 static u32 brcmf_sdio_hostmail(struct brcmf_sdio *bus)
 {
-	struct brcmf_sdio_dev *sdiod = bus->sdiodev;
+	struct brcmf_sdio_dev *sdiodev = bus->sdiodev;
 	struct brcmf_core *core = bus->sdio_core;
 	u32 intstatus = 0;
 	u32 hmb_data;
@@ -1061,11 +1060,11 @@ static u32 brcmf_sdio_hostmail(struct brcmf_sdio *bus)
 	brcmf_dbg(SDIO, "Enter\n");
 
 	/* Read mailbox data and ack that we did so */
-	hmb_data = brcmf_sdiod_readl(sdiod, core->base +
+	hmb_data = brcmf_sdiod_readl(sdiodev, core->base +
 					__sd_reg(tohostmailboxdata), &ret);
 
 	if (!ret)
-		brcmf_sdiod_writel(sdiod, core->base + __sd_reg(tosbmailbox),
+		brcmf_sdiod_writel(sdiodev, core->base + __sd_reg(tosbmailbox),
 				   SMB_INT_ACK, &ret);
 
 	bus->sdcnt.f1regdata += 2;
@@ -1136,7 +1135,8 @@ static u32 brcmf_sdio_hostmail(struct brcmf_sdio *bus)
 
 static void brcmf_sdio_rxfail(struct brcmf_sdio *bus, bool abort, bool rtx)
 {
-	struct brcmf_sdio_dev *sdiod = bus->sdiodev;
+	struct brcmf_sdio_dev *sdiodev = bus->sdiodev;
+	struct sdio_func *func2 = sdiodev->func2;
 	struct brcmf_core *core = bus->sdio_core;
 	uint retries = 0;
 	u16 lastrbc;
@@ -1148,16 +1148,15 @@ static void brcmf_sdio_rxfail(struct brcmf_sdio *bus, bool abort, bool rtx)
 		  rtx ? ", send NAK" : "");
 
 	if (abort)
-		brcmf_sdiod_abort(bus->sdiodev, bus->sdiodev->func2);
+		brcmf_sdiod_abort(sdiodev, func2);
 
-	brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL, SFC_RF_TERM,
-			   &err);
+	brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_FRAMECTRL, SFC_RF_TERM, &err);
 	bus->sdcnt.f1regdata++;
 
 	/* Wait until the packet has been flushed (device/FIFO stable) */
 	for (lastrbc = retries = 0xffff; retries > 0; retries--) {
-		hi = brcmf_sdiod_readb(bus->sdiodev, SBSDIO_FUNC1_RFRAMEBCHI, &err);
-		lo = brcmf_sdiod_readb(bus->sdiodev, SBSDIO_FUNC1_RFRAMEBCLO, &err);
+		hi = brcmf_sdiod_readb(sdiodev, SBSDIO_FUNC1_RFRAMEBCHI, &err);
+		lo = brcmf_sdiod_readb(sdiodev, SBSDIO_FUNC1_RFRAMEBCLO, &err);
 		bus->sdcnt.f1regdata += 2;
 
 		if ((hi == 0) && (lo == 0))
@@ -1177,7 +1176,7 @@ static void brcmf_sdio_rxfail(struct brcmf_sdio *bus, bool abort, bool rtx)
 
 	if (rtx) {
 		bus->sdcnt.rxrtx++;
-		brcmf_sdiod_writel(sdiod, core->base + __sd_reg(tosbmailbox),
+		brcmf_sdiod_writel(sdiodev, core->base + __sd_reg(tosbmailbox),
 				   SMB_NAK, &err);
 
 		bus->sdcnt.f1regdata++;
@@ -1192,13 +1191,14 @@ static void brcmf_sdio_rxfail(struct brcmf_sdio *bus, bool abort, bool rtx)
 static void brcmf_sdio_txfail(struct brcmf_sdio *bus)
 {
 	struct brcmf_sdio_dev *sdiodev = bus->sdiodev;
+	struct sdio_func *func2 = sdiodev->func2;
 	u8 i, hi, lo;
 
 	/* On failure, abort the command and terminate the frame */
 	brcmf_err("sdio error, abort command and terminate frame\n");
 	bus->sdcnt.tx_sderrs++;
 
-	brcmf_sdiod_abort(sdiodev, sdiodev->func2);
+	brcmf_sdiod_abort(sdiodev, func2);
 	brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_FRAMECTRL, SFC_WF_TERM, NULL);
 	bus->sdcnt.f1regdata++;
 
@@ -1447,6 +1447,8 @@ static void brcmf_sdio_hdpack(struct brcmf_sdio *bus, u8 *header,
 
 static u8 brcmf_sdio_rxglom(struct brcmf_sdio *bus, u8 rxseq)
 {
+	struct brcmf_sdio_dev *sdiodev = bus->sdiodev;
+	struct sdio_func *func1 = sdiodev->func1;
 	u16 dlen, totlen;
 	u8 *dptr, num = 0;
 	u16 sublen;
@@ -1554,10 +1556,9 @@ static u8 brcmf_sdio_rxglom(struct brcmf_sdio *bus, u8 rxseq)
 		 * read directly into the chained packet, or allocate a large
 		 * packet and and copy into the chain.
 		 */
-		sdio_claim_host(bus->sdiodev->func1);
-		errcode = brcmf_sdiod_recv_chain(bus->sdiodev,
-						 &bus->glom, dlen);
-		sdio_release_host(bus->sdiodev->func1);
+		sdio_claim_host(func1);
+		errcode = brcmf_sdiod_recv_chain(sdiodev, &bus->glom, dlen);
+		sdio_release_host(func1);
 		bus->sdcnt.f2rxdata++;
 
 		/* On failure, kill the superframe */
@@ -1565,11 +1566,11 @@ static u8 brcmf_sdio_rxglom(struct brcmf_sdio *bus, u8 rxseq)
 			brcmf_err("glom read of %d bytes failed: %d\n",
 				  dlen, errcode);
 
-			sdio_claim_host(bus->sdiodev->func1);
+			sdio_claim_host(func1);
 			brcmf_sdio_rxfail(bus, true, false);
 			bus->sdcnt.rxglomfail++;
 			brcmf_sdio_free_glom(bus);
-			sdio_release_host(bus->sdiodev->func1);
+			sdio_release_host(func1);
 			return 0;
 		}
 
@@ -1579,10 +1580,10 @@ static u8 brcmf_sdio_rxglom(struct brcmf_sdio *bus, u8 rxseq)
 
 		rd_new.seq_num = rxseq;
 		rd_new.len = dlen;
-		sdio_claim_host(bus->sdiodev->func1);
+		sdio_claim_host(func1);
 		errcode = brcmf_sdio_hdparse(bus, pfirst->data, &rd_new,
 					     BRCMF_SDIO_FT_SUPER);
-		sdio_release_host(bus->sdiodev->func1);
+		sdio_release_host(func1);
 		bus->cur_read.len = rd_new.len_nxtfrm << 4;
 
 		/* Remove superframe header, remember offset */
@@ -1598,10 +1599,10 @@ static u8 brcmf_sdio_rxglom(struct brcmf_sdio *bus, u8 rxseq)
 
 			rd_new.len = pnext->len;
 			rd_new.seq_num = rxseq++;
-			sdio_claim_host(bus->sdiodev->func1);
+			sdio_claim_host(func1);
 			errcode = brcmf_sdio_hdparse(bus, pnext->data, &rd_new,
 						     BRCMF_SDIO_FT_SUB);
-			sdio_release_host(bus->sdiodev->func1);
+			sdio_release_host(func1);
 			brcmf_dbg_hex_dump(BRCMF_GLOM_ON(),
 					   pnext->data, 32, "subframe:\n");
 
@@ -1610,11 +1611,11 @@ static u8 brcmf_sdio_rxglom(struct brcmf_sdio *bus, u8 rxseq)
 
 		if (errcode) {
 			/* Terminate frame on error */
-			sdio_claim_host(bus->sdiodev->func1);
+			sdio_claim_host(func1);
 			brcmf_sdio_rxfail(bus, true, false);
 			bus->sdcnt.rxglomfail++;
 			brcmf_sdio_free_glom(bus);
-			sdio_release_host(bus->sdiodev->func1);
+			sdio_release_host(func1);
 			bus->cur_read.len = 0;
 			return 0;
 		}
@@ -1648,9 +1649,9 @@ static u8 brcmf_sdio_rxglom(struct brcmf_sdio *bus, u8 rxseq)
 					   pfirst->prev);
 			skb_unlink(pfirst, &bus->glom);
 			if (brcmf_sdio_fromevntchan(&dptr[SDPCM_HWHDR_LEN]))
-				brcmf_rx_event(bus->sdiodev->dev, pfirst);
+				brcmf_rx_event(sdiodev->dev, pfirst);
 			else
-				brcmf_rx_frame(bus->sdiodev->dev, pfirst,
+				brcmf_rx_frame(sdiodev->dev, pfirst,
 					       false);
 			bus->sdcnt.rxglompkts++;
 		}
@@ -1691,6 +1692,7 @@ static int brcmf_sdio_dcmd_resp_wake(struct brcmf_sdio *bus)
 static void
 brcmf_sdio_read_control(struct brcmf_sdio *bus, u8 *hdr, uint len, uint doff)
 {
+	struct brcmf_sdio_dev *sdiodev = bus->sdiodev;
 	uint rdlen, pad;
 	u8 *buf = NULL, *rbuf;
 	int sdret;
@@ -1717,30 +1719,30 @@ brcmf_sdio_read_control(struct brcmf_sdio *bus, u8 *hdr, uint len, uint doff)
 	if (bus->roundup && bus->blocksize && (rdlen > bus->blocksize)) {
 		pad = bus->blocksize - (rdlen % bus->blocksize);
 		if ((pad <= bus->roundup) && (pad < bus->blocksize) &&
-		    ((len + pad) < bus->sdiodev->bus_if->maxctl))
+		    ((len + pad) < sdiodev->bus_if->maxctl))
 			rdlen += pad;
 	} else if (rdlen % bus->head_align) {
 		rdlen += bus->head_align - (rdlen % bus->head_align);
 	}
 
 	/* Drop if the read is too big or it exceeds our maximum */
-	if ((rdlen + BRCMF_FIRSTREAD) > bus->sdiodev->bus_if->maxctl) {
+	if ((rdlen + BRCMF_FIRSTREAD) > sdiodev->bus_if->maxctl) {
 		brcmf_err("%d-byte control read exceeds %d-byte buffer\n",
-			  rdlen, bus->sdiodev->bus_if->maxctl);
+			  rdlen, sdiodev->bus_if->maxctl);
 		brcmf_sdio_rxfail(bus, false, false);
 		goto done;
 	}
 
-	if ((len - doff) > bus->sdiodev->bus_if->maxctl) {
+	if ((len - doff) > sdiodev->bus_if->maxctl) {
 		brcmf_err("%d-byte ctl frame (%d-byte ctl data) exceeds %d-byte limit\n",
-			  len, len - doff, bus->sdiodev->bus_if->maxctl);
+			  len, len - doff, sdiodev->bus_if->maxctl);
 		bus->sdcnt.rx_toolong++;
 		brcmf_sdio_rxfail(bus, false, false);
 		goto done;
 	}
 
 	/* Read remain of frame body */
-	sdret = brcmf_sdiod_recv_buf(bus->sdiodev, rbuf, rdlen);
+	sdret = brcmf_sdiod_recv_buf(sdiodev, rbuf, rdlen);
 	bus->sdcnt.f2rxdata++;
 
 	/* Control frame failures need retransmission */
@@ -2015,6 +2017,7 @@ brcmf_sdio_wait_event_wakeup(struct brcmf_sdio *bus)
 
 static int brcmf_sdio_txpkt_hdalign(struct brcmf_sdio *bus, struct sk_buff *pkt)
 {
+	struct brcmf_sdio_dev *sdiodev = bus->sdiodev;
 	struct brcmf_bus_stats *stats;
 	u16 head_pad;
 	u8 *dat_buf;
@@ -2025,7 +2028,7 @@ static int brcmf_sdio_txpkt_hdalign(struct brcmf_sdio *bus, struct sk_buff *pkt)
 	head_pad = ((unsigned long)dat_buf % bus->head_align);
 	if (head_pad) {
 		if (skb_headroom(pkt) < head_pad) {
-			stats = &bus->sdiodev->bus_if->stats;
+			stats = &sdiodev->bus_if->stats;
 			atomic_inc(&stats->pktcowed);
 			if (skb_cow_head(pkt, head_pad)) {
 				atomic_inc(&stats->pktcow_failed);
@@ -2053,14 +2056,13 @@ static int brcmf_sdio_txpkt_prep_sg(struct brcmf_sdio *bus,
 				    struct sk_buff_head *pktq,
 				    struct sk_buff *pkt, u16 total_len)
 {
-	struct brcmf_sdio_dev *sdiodev;
+	struct brcmf_sdio_dev *sdiodev = bus->sdiodev;
 	struct sk_buff *pkt_pad;
 	u16 tail_pad, tail_chop, chain_pad;
 	unsigned int blksize;
 	bool lastfrm;
 	int ntail, ret;
 
-	sdiodev = bus->sdiodev;
 	blksize = sdiodev->func2->cur_blksize;
 	/* sg entry alignment should be a divisor of block size */
 	WARN_ON(blksize % bus->sgentry_align);
@@ -2231,6 +2233,9 @@ brcmf_sdio_txpkt_postp(struct brcmf_sdio *bus, struct sk_buff_head *pktq)
 static int brcmf_sdio_txpkt(struct brcmf_sdio *bus, struct sk_buff_head *pktq,
 			    uint chan)
 {
+	struct brcmf_sdio_dev *sdiodev = bus->sdiodev;
+	struct sdio_func *func1 = sdiodev->func1;
+
 	int ret;
 	struct sk_buff *pkt_next, *tmp;
 
@@ -2240,14 +2245,14 @@ static int brcmf_sdio_txpkt(struct brcmf_sdio *bus, struct sk_buff_head *pktq,
 	if (ret)
 		goto done;
 
-	sdio_claim_host(bus->sdiodev->func1);
-	ret = brcmf_sdiod_send_pkt(bus->sdiodev, pktq);
+	sdio_claim_host(func1);
+	ret = brcmf_sdiod_send_pkt(sdiodev, pktq);
 	bus->sdcnt.f2txdata++;
 
 	if (ret < 0)
 		brcmf_sdio_txfail(bus);
 
-	sdio_release_host(bus->sdiodev->func1);
+	sdio_release_host(func1);
 
 done:
 	brcmf_sdio_txpkt_postp(bus, pktq);
@@ -2255,7 +2260,7 @@ static int brcmf_sdio_txpkt(struct brcmf_sdio *bus, struct sk_buff_head *pktq,
 		bus->tx_seq = (bus->tx_seq + pktq->qlen) % SDPCM_SEQ_WRAP;
 	skb_queue_walk_safe(pktq, pkt_next, tmp) {
 		__skb_unlink(pkt_next, pktq);
-		brcmf_proto_bcdc_txcomplete(bus->sdiodev->dev, pkt_next,
+		brcmf_proto_bcdc_txcomplete(sdiodev->dev, pkt_next,
 					    ret == 0);
 	}
 	return ret;
@@ -2263,6 +2268,8 @@ static int brcmf_sdio_txpkt(struct brcmf_sdio *bus, struct sk_buff_head *pktq,
 
 static uint brcmf_sdio_sendfromq(struct brcmf_sdio *bus, uint maxframes)
 {
+	struct brcmf_sdio_dev *sdiodev = bus->sdiodev;
+	struct sdio_func *func1 = sdiodev->func1;
 	struct brcmf_core *core = bus->sdio_core;
 	struct sk_buff *pkt;
 	struct sk_buff_head pktq;
@@ -2280,7 +2287,7 @@ static uint brcmf_sdio_sendfromq(struct brcmf_sdio *bus, uint maxframes)
 		pkt_num = 1;
 		if (bus->txglom)
 			pkt_num = min_t(u8, bus->tx_max - bus->tx_seq,
-					bus->sdiodev->txglomsz);
+					sdiodev->txglomsz);
 		pkt_num = min_t(u32, pkt_num,
 				brcmu_pktq_mlen(&bus->txq, ~bus->flowcontrol));
 		__skb_queue_head_init(&pktq);
@@ -2303,12 +2310,12 @@ static uint brcmf_sdio_sendfromq(struct brcmf_sdio *bus, uint maxframes)
 		/* In poll mode, need to check for other events */
 		if (!bus->intr) {
 			/* Check device status, signal pending interrupt */
-			sdio_claim_host(bus->sdiodev->func1);
-			intstatus = brcmf_sdiod_readl(bus->sdiodev, core->base +
+			sdio_claim_host(func1);
+			intstatus = brcmf_sdiod_readl(sdiodev, core->base +
 						      __sd_reg(intstatus),
 						      &ret);
-			sdio_release_host(bus->sdiodev->func1);
 
+			sdio_release_host(func1);
 			bus->sdcnt.f2txdata++;
 			if (ret != 0)
 				break;
@@ -2318,10 +2325,10 @@ static uint brcmf_sdio_sendfromq(struct brcmf_sdio *bus, uint maxframes)
 	}
 
 	/* Deflow-control stack if needed */
-	if ((bus->sdiodev->state == BRCMF_SDIOD_DATA) &&
+	if ((sdiodev->state == BRCMF_SDIOD_DATA) &&
 	    bus->txoff && (pktq_len(&bus->txq) < TXLOW)) {
 		bus->txoff = false;
-		brcmf_proto_bcdc_txflowblock(bus->sdiodev->dev, false);
+		brcmf_proto_bcdc_txflowblock(sdiodev->dev, false);
 	}
 
 	return cnt;
@@ -2329,6 +2336,7 @@ static uint brcmf_sdio_sendfromq(struct brcmf_sdio *bus, uint maxframes)
 
 static int brcmf_sdio_tx_ctrlframe(struct brcmf_sdio *bus, u8 *frame, u16 len)
 {
+	struct brcmf_sdio_dev *sdiodev = bus->sdiodev;
 	u8 doff;
 	u16 pad;
 	uint retries = 0;
@@ -2378,7 +2386,7 @@ static int brcmf_sdio_tx_ctrlframe(struct brcmf_sdio *bus, u8 *frame, u16 len)
 			   frame, min_t(u16, len, 16), "TxHdr:\n");
 
 	do {
-		ret = brcmf_sdiod_send_buf(bus->sdiodev, frame, len);
+		ret = brcmf_sdiod_send_buf(sdiodev, frame, len);
 
 		if (ret < 0)
 			brcmf_sdio_txfail(bus);
@@ -2476,34 +2484,36 @@ static inline void brcmf_sdio_clrintr(struct brcmf_sdio *bus)
 
 static int brcmf_sdio_intr_rstatus(struct brcmf_sdio *bus)
 {
+	struct brcmf_sdio_dev *sdiodev = bus->sdiodev;
 	struct brcmf_core *core = bus->sdio_core;
 	unsigned long val;
 	int ret;
 
-	val = brcmf_sdiod_readl(bus->sdiodev, core->base + __sd_reg(intstatus),
-				&ret);
+	val = brcmf_sdiod_readl(sdiodev, core->base + __sd_reg(intstatus), &ret);
 	bus->sdcnt.f1regdata++;
 	if (ret != 0)
-		return ret;
+		goto out;
 
 	val &= bus->hostintmask;
 	atomic_set(&bus->fcstate, !!(val & I_HMB_FC_STATE));
 
+	if (!val)
+		goto out;
+
 	/* Clear interrupts */
-	if (val) {
-		brcmf_sdiod_writel(bus->sdiodev,
-				   core->base + __sd_reg(intstatus), val, &ret);
-		bus->sdcnt.f1regdata++;
-		atomic_or(val, &bus->intstatus);
-	}
+	brcmf_sdiod_writel(sdiodev, core->base + __sd_reg(intstatus), val, &ret);
+	bus->sdcnt.f1regdata++;
+	atomic_or(val, &bus->intstatus);
 
+out:
 	return ret;
 }
 
 static void brcmf_sdio_dpc(struct brcmf_sdio *bus)
 {
 	struct brcmf_core *core = bus->sdio_core;
-	struct brcmf_sdio_dev *sdiod = bus->sdiodev;
+	struct brcmf_sdio_dev *sdiodev = bus->sdiodev;
+	struct sdio_func *func1 = sdiodev->func1;
 	u32 newstatus = 0;
 	unsigned long intstatus;
 	uint txlimit = bus->txbound;	/* Tx frames to send before resched */
@@ -2512,7 +2522,7 @@ static void brcmf_sdio_dpc(struct brcmf_sdio *bus)
 
 	brcmf_dbg(TRACE, "Enter\n");
 
-	sdio_claim_host(bus->sdiodev->func1);
+	sdio_claim_host(func1);
 
 	/* If waiting for HTAVAIL, check status */
 	if (!bus->sr_enabled && bus->clkstate == CLK_PENDING) {
@@ -2520,23 +2530,21 @@ static void brcmf_sdio_dpc(struct brcmf_sdio *bus)
 
 #ifdef DEBUG
 		/* Check for inconsistent device control */
-		devctl = brcmf_sdiod_readb(bus->sdiodev, SBSDIO_DEVICE_CTL,
-					   &err);
+		devctl = brcmf_sdiod_readb(sdiodev, SBSDIO_DEVICE_CTL, &err);
 #endif				/* DEBUG */
 
 		/* Read CSR, if clock on switch to AVAIL, else ignore */
-		clkctl = brcmf_sdiod_readb(bus->sdiodev,
-					   SBSDIO_FUNC1_CHIPCLKCSR, &err);
+		clkctl = brcmf_sdiod_readb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, &err);
 
 		brcmf_dbg(SDIO, "DPC: PENDING, devctl 0x%02x clkctl 0x%02x\n",
 			  devctl, clkctl);
 
 		if (SBSDIO_HTAV(clkctl)) {
-			devctl = brcmf_sdiod_readb(bus->sdiodev,
-						   SBSDIO_DEVICE_CTL, &err);
+			devctl = brcmf_sdiod_readb(sdiodev, SBSDIO_DEVICE_CTL,
+						   &err);
 			devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY;
-			brcmf_sdiod_writeb(bus->sdiodev,
-					   SBSDIO_DEVICE_CTL, devctl, &err);
+			brcmf_sdiod_writeb(sdiodev, SBSDIO_DEVICE_CTL, devctl,
+					   &err);
 			bus->clkstate = CLK_AVAIL;
 		}
 	}
@@ -2559,10 +2567,10 @@ static void brcmf_sdio_dpc(struct brcmf_sdio *bus)
 	 */
 	if (intstatus & I_HMB_FC_CHANGE) {
 		intstatus &= ~I_HMB_FC_CHANGE;
-		brcmf_sdiod_writel(sdiod, core->base + __sd_reg(intstatus),
+		brcmf_sdiod_writel(sdiodev, core->base + __sd_reg(intstatus),
 				   I_HMB_FC_CHANGE, &err);
 
-		newstatus = brcmf_sdiod_readl(sdiod,
+		newstatus = brcmf_sdiod_readl(sdiodev,
 					      core->base + __sd_reg(intstatus),
 					      &err);
 
@@ -2578,7 +2586,7 @@ static void brcmf_sdio_dpc(struct brcmf_sdio *bus)
 		intstatus |= brcmf_sdio_hostmail(bus);
 	}
 
-	sdio_release_host(bus->sdiodev->func1);
+	sdio_release_host(func1);
 
 	/* Generally don't ask for these, can get CRC errors... */
 	if (intstatus & I_WR_OOSYNC) {
@@ -2621,7 +2629,7 @@ static void brcmf_sdio_dpc(struct brcmf_sdio *bus)
 
 	if (bus->ctrl_frame_stat && (bus->clkstate == CLK_AVAIL) &&
 	    data_ok(bus)) {
-		sdio_claim_host(bus->sdiodev->func1);
+		sdio_claim_host(func1);
 		if (bus->ctrl_frame_stat) {
 			err = brcmf_sdio_tx_ctrlframe(bus,  bus->ctrl_frame_buf,
 						      bus->ctrl_frame_len);
@@ -2629,7 +2637,7 @@ static void brcmf_sdio_dpc(struct brcmf_sdio *bus)
 			wmb();
 			bus->ctrl_frame_stat = false;
 		}
-		sdio_release_host(bus->sdiodev->func1);
+		sdio_release_host(func1);
 		brcmf_sdio_wait_event_wakeup(bus);
 	}
 	/* Send queued frames (limit 1 if rx may still be pending) */
@@ -2641,18 +2649,18 @@ static void brcmf_sdio_dpc(struct brcmf_sdio *bus)
 		brcmf_sdio_sendfromq(bus, framecnt);
 	}
 
-	if ((bus->sdiodev->state != BRCMF_SDIOD_DATA) || (err != 0)) {
+	if ((sdiodev->state != BRCMF_SDIOD_DATA) || (err != 0)) {
 		brcmf_err("failed backplane access over SDIO, halting operation\n");
 		atomic_set(&bus->intstatus, 0);
 		if (bus->ctrl_frame_stat) {
-			sdio_claim_host(bus->sdiodev->func1);
+			sdio_claim_host(func1);
 			if (bus->ctrl_frame_stat) {
 				bus->ctrl_frame_err = -ENODEV;
 				wmb();
 				bus->ctrl_frame_stat = false;
 				brcmf_sdio_wait_event_wakeup(bus);
 			}
-			sdio_release_host(bus->sdiodev->func1);
+			sdio_release_host(func1);
 		}
 	} else if (atomic_read(&bus->intstatus) ||
 		   atomic_read(&bus->ipend) > 0 ||
@@ -2769,6 +2777,7 @@ static int brcmf_sdio_bus_txdata(struct device *dev, struct sk_buff *pkt)
 
 static int brcmf_sdio_readconsole(struct brcmf_sdio *bus)
 {
+	struct brcmf_sdio_dev *sdiodev = bus->sdiodev;
 	struct brcmf_console *c = &bus->console;
 	u8 line[CONSOLE_LINE_MAX], ch;
 	u32 n, idx, addr;
@@ -2780,7 +2789,7 @@ static int brcmf_sdio_readconsole(struct brcmf_sdio *bus)
 
 	/* Read console log struct */
 	addr = bus->console_addr + offsetof(struct rte_console, log_le);
-	rv = brcmf_sdiod_ramrw(bus->sdiodev, false, addr, (u8 *)&c->log_le,
+	rv = brcmf_sdiod_ramrw(sdiodev, false, addr, (u8 *)&c->log_le,
 			       sizeof(c->log_le));
 	if (rv < 0)
 		return rv;
@@ -2806,7 +2815,7 @@ static int brcmf_sdio_readconsole(struct brcmf_sdio *bus)
 
 	/* Read the console buffer */
 	addr = le32_to_cpu(c->log_le.buf);
-	rv = brcmf_sdiod_ramrw(bus->sdiodev, false, addr, c->buf, c->bufsize);
+	rv = brcmf_sdiod_ramrw(sdiodev, false, addr, c->buf, c->bufsize);
 	if (rv < 0)
 		return rv;
 
@@ -2849,6 +2858,7 @@ brcmf_sdio_bus_txctl(struct device *dev, unsigned char *msg, uint msglen)
 {
 	struct brcmf_bus *bus_if = dev_get_drvdata(dev);
 	struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
+	struct sdio_func *func1 = sdiodev->func1;
 	struct brcmf_sdio *bus = sdiodev->bus;
 	int ret;
 
@@ -2867,13 +2877,13 @@ brcmf_sdio_bus_txctl(struct device *dev, unsigned char *msg, uint msglen)
 					 CTL_DONE_TIMEOUT);
 	ret = 0;
 	if (bus->ctrl_frame_stat) {
-		sdio_claim_host(bus->sdiodev->func1);
+		sdio_claim_host(func1);
 		if (bus->ctrl_frame_stat) {
 			brcmf_dbg(SDIO, "ctrl_frame timeout\n");
 			bus->ctrl_frame_stat = false;
 			ret = -ETIMEDOUT;
 		}
-		sdio_release_host(bus->sdiodev->func1);
+		sdio_release_host(func1);
 	}
 	if (!ret) {
 		brcmf_dbg(SDIO, "ctrl_frame complete, err=%d\n",
@@ -2894,6 +2904,7 @@ brcmf_sdio_bus_txctl(struct device *dev, unsigned char *msg, uint msglen)
 static int brcmf_sdio_dump_console(struct seq_file *seq, struct brcmf_sdio *bus,
 				   struct sdpcm_shared *sh)
 {
+	struct brcmf_sdio_dev *sdiodev = bus->sdiodev;
 	u32 addr, console_ptr, console_size, console_index;
 	char *conbuf = NULL;
 	__le32 sh_val;
@@ -2901,22 +2912,19 @@ static int brcmf_sdio_dump_console(struct seq_file *seq, struct brcmf_sdio *bus,
 
 	/* obtain console information from device memory */
 	addr = sh->console_addr + offsetof(struct rte_console, log_le);
-	rv = brcmf_sdiod_ramrw(bus->sdiodev, false, addr,
-			       (u8 *)&sh_val, sizeof(u32));
+	rv = brcmf_sdiod_ramrw(sdiodev, false, addr, (u8 *)&sh_val, sizeof(u32));
 	if (rv < 0)
 		return rv;
 	console_ptr = le32_to_cpu(sh_val);
 
 	addr = sh->console_addr + offsetof(struct rte_console, log_le.buf_size);
-	rv = brcmf_sdiod_ramrw(bus->sdiodev, false, addr,
-			       (u8 *)&sh_val, sizeof(u32));
+	rv = brcmf_sdiod_ramrw(sdiodev, false, addr, (u8 *)&sh_val, sizeof(u32));
 	if (rv < 0)
 		return rv;
 	console_size = le32_to_cpu(sh_val);
 
 	addr = sh->console_addr + offsetof(struct rte_console, log_le.idx);
-	rv = brcmf_sdiod_ramrw(bus->sdiodev, false, addr,
-			       (u8 *)&sh_val, sizeof(u32));
+	rv = brcmf_sdiod_ramrw(sdiodev, false, addr, (u8 *)&sh_val, sizeof(u32));
 	if (rv < 0)
 		return rv;
 	console_index = le32_to_cpu(sh_val);
@@ -2930,7 +2938,7 @@ static int brcmf_sdio_dump_console(struct seq_file *seq, struct brcmf_sdio *bus,
 
 	/* obtain the console data from device */
 	conbuf[console_size] = '\0';
-	rv = brcmf_sdiod_ramrw(bus->sdiodev, false, console_ptr, (u8 *)conbuf,
+	rv = brcmf_sdiod_ramrw(sdiodev, false, console_ptr, (u8 *)conbuf,
 			       console_size);
 	if (rv < 0)
 		goto done;
@@ -2985,6 +2993,8 @@ static int brcmf_sdio_trap_info(struct seq_file *seq, struct brcmf_sdio *bus,
 static int brcmf_sdio_assert_info(struct seq_file *seq, struct brcmf_sdio *bus,
 				  struct sdpcm_shared *sh)
 {
+	struct brcmf_sdio_dev *sdiodev = bus->sdiodev;
+	struct sdio_func *func1 = sdiodev->func1;
 	int error = 0;
 	char file[80] = "?";
 	char expr[80] = "<???>";
@@ -2997,20 +3007,20 @@ static int brcmf_sdio_assert_info(struct seq_file *seq, struct brcmf_sdio *bus,
 		return 0;
 	}
 
-	sdio_claim_host(bus->sdiodev->func1);
+	sdio_claim_host(func1);
 	if (sh->assert_file_addr != 0) {
-		error = brcmf_sdiod_ramrw(bus->sdiodev, false,
+		error = brcmf_sdiod_ramrw(sdiodev, false,
 					  sh->assert_file_addr, (u8 *)file, 80);
 		if (error < 0)
 			return error;
 	}
 	if (sh->assert_exp_addr != 0) {
-		error = brcmf_sdiod_ramrw(bus->sdiodev, false,
+		error = brcmf_sdiod_ramrw(sdiodev, false,
 					  sh->assert_exp_addr, (u8 *)expr, 80);
 		if (error < 0)
 			return error;
 	}
-	sdio_release_host(bus->sdiodev->func1);
+	sdio_release_host(func1);
 
 	seq_printf(seq, "dongle assert: %s:%d: assert(%s)\n",
 		   file, sh->assert_line, expr);
@@ -3242,16 +3252,17 @@ brcmf_sdio_verifymemory(struct brcmf_sdio_dev *sdiodev, u32 ram_addr,
 static int brcmf_sdio_download_code_file(struct brcmf_sdio *bus,
 					 const struct firmware *fw)
 {
+	struct brcmf_sdio_dev *sdiodev = bus->sdiodev;
 	int err;
 
 	brcmf_dbg(TRACE, "Enter\n");
 
-	err = brcmf_sdiod_ramrw(bus->sdiodev, true, bus->ci->rambase,
-				(u8 *)fw->data, fw->size);
+	err = brcmf_sdiod_ramrw(sdiodev, true, bus->ci->rambase, (u8 *)fw->data,
+				fw->size);
 	if (err)
 		brcmf_err("error %d on writing %d membytes at 0x%08x\n",
 			  err, (int)fw->size, bus->ci->rambase);
-	else if (!brcmf_sdio_verifymemory(bus->sdiodev, bus->ci->rambase,
+	else if (!brcmf_sdio_verifymemory(sdiodev, bus->ci->rambase,
 					  (u8 *)fw->data, fw->size))
 		err = -EIO;
 
@@ -3261,17 +3272,18 @@ static int brcmf_sdio_download_code_file(struct brcmf_sdio *bus,
 static int brcmf_sdio_download_nvram(struct brcmf_sdio *bus,
 				     void *vars, u32 varsz)
 {
+	struct brcmf_sdio_dev *sdiodev = bus->sdiodev;
 	int address;
 	int err;
 
 	brcmf_dbg(TRACE, "Enter\n");
 
 	address = bus->ci->ramsize - varsz + bus->ci->rambase;
-	err = brcmf_sdiod_ramrw(bus->sdiodev, true, address, vars, varsz);
+	err = brcmf_sdiod_ramrw(sdiodev, true, address, vars, varsz);
 	if (err)
 		brcmf_err("error %d on writing %d nvram bytes at 0x%08x\n",
 			  err, varsz, address);
-	else if (!brcmf_sdio_verifymemory(bus->sdiodev, address, vars, varsz))
+	else if (!brcmf_sdio_verifymemory(sdiodev, address, vars, varsz))
 		err = -EIO;
 
 	return err;
@@ -3281,10 +3293,12 @@ static int brcmf_sdio_download_firmware(struct brcmf_sdio *bus,
 					const struct firmware *fw,
 					void *nvram, u32 nvlen)
 {
+	struct brcmf_sdio_dev *sdiodev = bus->sdiodev;
+	struct sdio_func *func1 = sdiodev->func1;
 	int bcmerror;
 	u32 rstvec;
 
-	sdio_claim_host(bus->sdiodev->func1);
+	sdio_claim_host(func1);
 	brcmf_sdio_clkctl(bus, CLK_AVAIL, false);
 
 	rstvec = get_unaligned_le32(fw->data);
@@ -3313,32 +3327,33 @@ static int brcmf_sdio_download_firmware(struct brcmf_sdio *bus,
 
 err:
 	brcmf_sdio_clkctl(bus, CLK_SDONLY, false);
-	sdio_release_host(bus->sdiodev->func1);
+	sdio_release_host(func1);
 	return bcmerror;
 }
 
 static void brcmf_sdio_sr_init(struct brcmf_sdio *bus)
 {
+	struct brcmf_sdio_dev *sdiodev = bus->sdiodev;
 	int err = 0;
 	u8 val;
 
 	brcmf_dbg(TRACE, "Enter\n");
 
-	val = brcmf_sdiod_readb(bus->sdiodev, SBSDIO_FUNC1_WAKEUPCTRL, &err);
+	val = brcmf_sdiod_readb(sdiodev, SBSDIO_FUNC1_WAKEUPCTRL, &err);
 	if (err) {
 		brcmf_err("error reading SBSDIO_FUNC1_WAKEUPCTRL\n");
 		return;
 	}
 
 	val |= 1 << SBSDIO_FUNC1_WCTRL_HTWAIT_SHIFT;
-	brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_WAKEUPCTRL, val, &err);
+	brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_WAKEUPCTRL, val, &err);
 	if (err) {
 		brcmf_err("error writing SBSDIO_FUNC1_WAKEUPCTRL\n");
 		return;
 	}
 
 	/* Add CMD14 Support */
-	brcmf_sdiod_func0_wb(bus->sdiodev, SDIO_CCCR_BRCM_CARDCAP,
+	brcmf_sdiod_func0_wb(sdiodev, SDIO_CCCR_BRCM_CARDCAP,
 			     (SDIO_CCCR_BRCM_CARDCAP_CMD14_SUPPORT |
 			      SDIO_CCCR_BRCM_CARDCAP_CMD14_EXT),
 			     &err);
@@ -3347,8 +3362,8 @@ static void brcmf_sdio_sr_init(struct brcmf_sdio *bus)
 		return;
 	}
 
-	brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
-			   SBSDIO_FORCE_HT, &err);
+	brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, SBSDIO_FORCE_HT,
+			   &err);
 	if (err) {
 		brcmf_err("error writing SBSDIO_FUNC1_CHIPCLKCSR\n");
 		return;
@@ -3362,6 +3377,7 @@ static void brcmf_sdio_sr_init(struct brcmf_sdio *bus)
 /* enable KSO bit */
 static int brcmf_sdio_kso_init(struct brcmf_sdio *bus)
 {
+	struct brcmf_sdio_dev *sdiodev = bus->sdiodev;
 	struct brcmf_core *core = bus->sdio_core;
 	u8 val;
 	int err = 0;
@@ -3372,7 +3388,7 @@ static int brcmf_sdio_kso_init(struct brcmf_sdio *bus)
 	if (core->rev < 12)
 		return 0;
 
-	val = brcmf_sdiod_readb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, &err);
+	val = brcmf_sdiod_readb(sdiodev, SBSDIO_FUNC1_SLEEPCSR, &err);
 	if (err) {
 		brcmf_err("error reading SBSDIO_FUNC1_SLEEPCSR\n");
 		return err;
@@ -3381,7 +3397,7 @@ static int brcmf_sdio_kso_init(struct brcmf_sdio *bus)
 	if (!(val & SBSDIO_FUNC1_SLEEPCSR_KSO_MASK)) {
 		val |= (SBSDIO_FUNC1_SLEEPCSR_KSO_EN <<
 			SBSDIO_FUNC1_SLEEPCSR_KSO_SHIFT);
-		brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, val, &err);
+		brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_SLEEPCSR, val, &err);
 		if (err) {
 			brcmf_err("error writing SBSDIO_FUNC1_SLEEPCSR\n");
 			return err;
@@ -3397,6 +3413,7 @@ static int brcmf_sdio_bus_preinit(struct device *dev)
 	struct brcmf_bus *bus_if = dev_get_drvdata(dev);
 	struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
 	struct brcmf_sdio *bus = sdiodev->bus;
+	struct sdio_func *func2 = sdiodev->func2;
 	struct brcmf_core *core = bus->sdio_core;
 	uint pad_size;
 	u32 value;
@@ -3427,8 +3444,8 @@ static int brcmf_sdio_bus_preinit(struct device *dev)
 	if (sdiodev->sg_support) {
 		bus->txglom = false;
 		value = 1;
-		pad_size = bus->sdiodev->func2->cur_blksize << 1;
-		err = brcmf_iovar_data_set(bus->sdiodev->dev, "bus:rxglom",
+		pad_size = func2->cur_blksize << 1;
+		err = brcmf_iovar_data_set(sdiodev->dev, "bus:rxglom",
 					   &value, sizeof(u32));
 		if (err < 0) {
 			/* bus:rxglom is allowed to fail */
@@ -3438,7 +3455,7 @@ static int brcmf_sdio_bus_preinit(struct device *dev)
 			bus->tx_hdrlen += SDPCM_HWEXT_LEN;
 		}
 	}
-	brcmf_bus_add_txhdrlen(bus->sdiodev->dev, bus->tx_hdrlen);
+	brcmf_bus_add_txhdrlen(sdiodev->dev, bus->tx_hdrlen);
 
 done:
 	return err;
@@ -3525,6 +3542,9 @@ void brcmf_sdio_isr(struct brcmf_sdio *bus)
 
 static void brcmf_sdio_bus_watchdog(struct brcmf_sdio *bus)
 {
+	struct brcmf_sdio_dev *sdiodev = bus->sdiodev;
+	struct sdio_func *func1 = sdiodev->func1;
+
 	brcmf_dbg(TIMER, "Enter\n");
 
 	/* Poll period: check device if appropriate. */
@@ -3542,10 +3562,11 @@ static void brcmf_sdio_bus_watchdog(struct brcmf_sdio *bus)
 			if (!bus->dpc_triggered) {
 				u8 devpend;
 
-				sdio_claim_host(bus->sdiodev->func1);
-				devpend = brcmf_sdiod_func0_rb(bus->sdiodev,
-						  SDIO_CCCR_INTx, NULL);
-				sdio_release_host(bus->sdiodev->func1);
+				sdio_claim_host(func1);
+				devpend = brcmf_sdiod_func0_rb(sdiodev,
+							       SDIO_CCCR_INTx,
+							       NULL);
+				sdio_release_host(func1);
 				intstatus = devpend & (INTR_STATUS_FUNC1 |
 						       INTR_STATUS_FUNC2);
 			}
@@ -3566,18 +3587,18 @@ static void brcmf_sdio_bus_watchdog(struct brcmf_sdio *bus)
 	}
 #ifdef DEBUG
 	/* Poll for console output periodically */
-	if (bus->sdiodev->state == BRCMF_SDIOD_DATA && BRCMF_FWCON_ON() &&
+	if (sdiodev->state == BRCMF_SDIOD_DATA && BRCMF_FWCON_ON() &&
 	    bus->console_interval != 0) {
 		bus->console.count += jiffies_to_msecs(BRCMF_WD_POLL);
 		if (bus->console.count >= bus->console_interval) {
 			bus->console.count -= bus->console_interval;
-			sdio_claim_host(bus->sdiodev->func1);
+			sdio_claim_host(func1);
 			/* Make sure backplane clock is on */
 			brcmf_sdio_bus_sleep(bus, false, false);
 			if (brcmf_sdio_readconsole(bus) < 0)
 				/* stop on error */
 				bus->console_interval = 0;
-			sdio_release_host(bus->sdiodev->func1);
+			sdio_release_host(func1);
 		}
 	}
 #endif				/* DEBUG */
@@ -3590,11 +3611,11 @@ static void brcmf_sdio_bus_watchdog(struct brcmf_sdio *bus)
 			bus->idlecount++;
 			if (bus->idlecount > bus->idletime) {
 				brcmf_dbg(SDIO, "idle\n");
-				sdio_claim_host(bus->sdiodev->func1);
+				sdio_claim_host(func1);
 				brcmf_sdio_wd_timer(bus, false);
 				bus->idlecount = 0;
 				brcmf_sdio_bus_sleep(bus, true, false);
-				sdio_release_host(bus->sdiodev->func1);
+				sdio_release_host(func1);
 			}
 		} else {
 			bus->idlecount = 0;
@@ -3608,6 +3629,7 @@ static void brcmf_sdio_dataworker(struct work_struct *work)
 {
 	struct brcmf_sdio *bus = container_of(work, struct brcmf_sdio,
 					      datawork);
+	struct brcmf_sdio_dev *sdiodev = bus->sdiodev;
 
 	bus->dpc_running = true;
 	wmb();
@@ -3617,10 +3639,10 @@ static void brcmf_sdio_dataworker(struct work_struct *work)
 		bus->idlecount = 0;
 	}
 	bus->dpc_running = false;
-	if (brcmf_sdiod_freezing(bus->sdiodev)) {
-		brcmf_sdiod_change_state(bus->sdiodev, BRCMF_SDIOD_DOWN);
-		brcmf_sdiod_try_freeze(bus->sdiodev);
-		brcmf_sdiod_change_state(bus->sdiodev, BRCMF_SDIOD_DATA);
+	if (brcmf_sdiod_freezing(sdiodev)) {
+		brcmf_sdiod_change_state(sdiodev, BRCMF_SDIOD_DOWN);
+		brcmf_sdiod_try_freeze(sdiodev);
+		brcmf_sdiod_change_state(sdiodev, BRCMF_SDIOD_DATA);
 	}
 }
 
@@ -3798,15 +3820,15 @@ static const struct brcmf_buscore_ops brcmf_sdio_buscore_ops = {
 static bool
 brcmf_sdio_probe_attach(struct brcmf_sdio *bus)
 {
-	struct brcmf_sdio_dev *sdiodev;
+	struct brcmf_sdio_dev *sdiodev = bus->sdiodev;
+	struct sdio_func *func1 = sdiodev->func1;
 	u8 clkctl = 0;
 	int err = 0;
 	int reg_addr;
 	u32 reg_val;
 	u32 drivestrength;
 
-	sdiodev = bus->sdiodev;
-	sdio_claim_host(sdiodev->func1);
+	sdio_claim_host(func1);
 
 	pr_debug("F1 signature read @0x18000000=0x%4x\n",
 		 brcmf_sdiod_readl(sdiodev, SI_ENUM_BASE, NULL));
@@ -3942,18 +3964,19 @@ static int
 brcmf_sdio_watchdog_thread(void *data)
 {
 	struct brcmf_sdio *bus = (struct brcmf_sdio *)data;
+	struct brcmf_sdio_dev *sdiodev = bus->sdiodev;
 	int wait;
 
 	allow_signal(SIGTERM);
 	/* Run until signal received */
-	brcmf_sdiod_freezer_count(bus->sdiodev);
+	brcmf_sdiod_freezer_count(sdiodev);
 	while (1) {
 		if (kthread_should_stop())
 			break;
-		brcmf_sdiod_freezer_uncount(bus->sdiodev);
+		brcmf_sdiod_freezer_uncount(sdiodev);
 		wait = wait_for_completion_interruptible(&bus->watchdog_wait);
-		brcmf_sdiod_freezer_count(bus->sdiodev);
-		brcmf_sdiod_try_freeze(bus->sdiodev);
+		brcmf_sdiod_freezer_count(sdiodev);
+		brcmf_sdiod_try_freeze(sdiodev);
 		if (!wait) {
 			brcmf_sdio_bus_watchdog(bus);
 			/* Count the tick for reference */
@@ -3997,8 +4020,9 @@ static void brcmf_sdio_firmware_callback(struct device *dev, int err,
 {
 	struct brcmf_bus *bus_if = dev_get_drvdata(dev);
 	struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
+	struct sdio_func *func1 = sdiodev->func1;
+	struct sdio_func *func2 = sdiodev->func2;
 	struct brcmf_sdio *bus = sdiodev->bus;
-	struct brcmf_sdio_dev *sdiod = bus->sdiodev;
 	struct brcmf_core *core = bus->sdio_core;
 	u8 saveclk;
 
@@ -4021,7 +4045,7 @@ static void brcmf_sdio_firmware_callback(struct device *dev, int err,
 	bus->sdcnt.tickcnt = 0;
 	brcmf_sdio_wd_timer(bus, true);
 
-	sdio_claim_host(sdiodev->func1);
+	sdio_claim_host(func1);
 
 	/* Make sure backplane clock is on, needed to generate F2 interrupt */
 	brcmf_sdio_clkctl(bus, CLK_AVAIL, false);
@@ -4040,10 +4064,10 @@ static void brcmf_sdio_firmware_callback(struct device *dev, int err,
 	}
 
 	/* Enable function 2 (frame transfers) */
-	brcmf_sdiod_writel(sdiod, core->base + __sd_reg(tosbmailboxdata),
+	brcmf_sdiod_writel(sdiodev, core->base + __sd_reg(tosbmailboxdata),
 			   SDPCM_PROT_VERSION << SMB_DATA_VERSION_SHIFT, NULL);
 
-	err = sdio_enable_func(sdiodev->func2);
+	err = sdio_enable_func(func2);
 
 	brcmf_dbg(INFO, "enable F2: err=%d\n", err);
 
@@ -4051,14 +4075,13 @@ static void brcmf_sdio_firmware_callback(struct device *dev, int err,
 	if (!err) {
 		/* Set up the interrupt mask and enable interrupts */
 		bus->hostintmask = HOSTINTMASK;
-		brcmf_sdiod_writel(sdiod, core->base + __sd_reg(hostintmask),
+		brcmf_sdiod_writel(sdiodev, core->base + __sd_reg(hostintmask),
 				   bus->hostintmask, NULL);
 
-
 		brcmf_sdiod_writeb(sdiodev, SBSDIO_WATERMARK, 8, &err);
 	} else {
 		/* Disable F2 again */
-		sdio_disable_func(sdiodev->func2);
+		sdio_disable_func(func2);
 		goto release;
 	}
 
@@ -4071,7 +4094,7 @@ static void brcmf_sdio_firmware_callback(struct device *dev, int err,
 
 	if (err == 0) {
 		/* Allow full data communication using DPC from now on. */
-		brcmf_sdiod_change_state(bus->sdiodev, BRCMF_SDIOD_DATA);
+		brcmf_sdiod_change_state(sdiodev, BRCMF_SDIOD_DATA);
 
 		err = brcmf_sdiod_intr_register(sdiodev);
 		if (err != 0)
@@ -4082,7 +4105,7 @@ static void brcmf_sdio_firmware_callback(struct device *dev, int err,
 	if (err != 0)
 		brcmf_sdio_clkctl(bus, CLK_NONE, false);
 
-	sdio_release_host(sdiodev->func1);
+	sdio_release_host(func1);
 
 	err = brcmf_bus_started(dev);
 	if (err != 0) {
@@ -4092,11 +4115,11 @@ static void brcmf_sdio_firmware_callback(struct device *dev, int err,
 	return;
 
 release:
-	sdio_release_host(sdiodev->func1);
+	sdio_release_host(func1);
 fail:
 	brcmf_dbg(TRACE, "failed: dev=%s, err=%d\n", dev_name(dev), err);
 	device_release_driver(dev);
-	device_release_driver(&sdiodev->func2->dev);
+	device_release_driver(&func2->dev);
 }
 
 struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev)
@@ -4161,30 +4184,30 @@ struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev)
 	bus->dpc_running = false;
 
 	/* Assign bus interface call back */
-	bus->sdiodev->bus_if->dev = bus->sdiodev->dev;
-	bus->sdiodev->bus_if->ops = &brcmf_sdio_bus_ops;
-	bus->sdiodev->bus_if->chip = bus->ci->chip;
-	bus->sdiodev->bus_if->chiprev = bus->ci->chiprev;
+	sdiodev->bus_if->dev = sdiodev->dev;
+	sdiodev->bus_if->ops = &brcmf_sdio_bus_ops;
+	sdiodev->bus_if->chip = bus->ci->chip;
+	sdiodev->bus_if->chiprev = bus->ci->chiprev;
 
 	/* default sdio bus header length for tx packet */
 	bus->tx_hdrlen = SDPCM_HWHDR_LEN + SDPCM_SWHDR_LEN;
 
 	/* Attach to the common layer, reserve hdr space */
-	ret = brcmf_attach(bus->sdiodev->dev, bus->sdiodev->settings);
+	ret = brcmf_attach(sdiodev->dev, sdiodev->settings);
 	if (ret != 0) {
 		brcmf_err("brcmf_attach failed\n");
 		goto fail;
 	}
 
 	/* Query the F2 block size, set roundup accordingly */
-	bus->blocksize = bus->sdiodev->func2->cur_blksize;
+	bus->blocksize = sdiodev->func2->cur_blksize;
 	bus->roundup = min(max_roundup, bus->blocksize);
 
 	/* Allocate buffers */
-	if (bus->sdiodev->bus_if->maxctl) {
-		bus->sdiodev->bus_if->maxctl += bus->roundup;
+	if (sdiodev->bus_if->maxctl) {
+		sdiodev->bus_if->maxctl += bus->roundup;
 		bus->rxblen =
-		    roundup((bus->sdiodev->bus_if->maxctl + SDPCM_HDRLEN),
+		    roundup((sdiodev->bus_if->maxctl + SDPCM_HDRLEN),
 			    ALIGNMENT) + bus->head_align;
 		bus->rxbuf = kmalloc(bus->rxblen, GFP_ATOMIC);
 		if (!(bus->rxbuf)) {
@@ -4193,17 +4216,17 @@ struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev)
 		}
 	}
 
-	sdio_claim_host(bus->sdiodev->func1);
+	sdio_claim_host(sdiodev->func1);
 
 	/* Disable F2 to clear any intermediate frame state on the dongle */
-	sdio_disable_func(bus->sdiodev->func2);
+	sdio_disable_func(sdiodev->func2);
 
 	bus->rxflow = false;
 
 	/* Done with backplane-dependent accesses, can drop clock... */
-	brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, 0, NULL);
+	brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, 0, NULL);
 
-	sdio_release_host(bus->sdiodev->func1);
+	sdio_release_host(sdiodev->func1);
 
 	/* ...and initialize clock/power states */
 	bus->clkstate = CLK_SDONLY;
@@ -4244,18 +4267,21 @@ void brcmf_sdio_remove(struct brcmf_sdio *bus)
 	brcmf_dbg(TRACE, "Enter\n");
 
 	if (bus) {
+		struct brcmf_sdio_dev *sdiodev = bus->sdiodev;
+		struct sdio_func *func1 = sdiodev->func1;
+
 		/* De-register interrupt handler */
-		brcmf_sdiod_intr_unregister(bus->sdiodev);
+		brcmf_sdiod_intr_unregister(sdiodev);
 
-		brcmf_detach(bus->sdiodev->dev);
+		brcmf_detach(sdiodev->dev);
 
 		cancel_work_sync(&bus->datawork);
 		if (bus->brcmf_wq)
 			destroy_workqueue(bus->brcmf_wq);
 
 		if (bus->ci) {
-			if (bus->sdiodev->state != BRCMF_SDIOD_NOMEDIUM) {
-				sdio_claim_host(bus->sdiodev->func1);
+			if (sdiodev->state != BRCMF_SDIOD_NOMEDIUM) {
+				sdio_claim_host(sdiodev->func1);
 				brcmf_sdio_wd_timer(bus, false);
 				brcmf_sdio_clkctl(bus, CLK_AVAIL, false);
 				/* Leave the device in state where it is
@@ -4265,12 +4291,12 @@ void brcmf_sdio_remove(struct brcmf_sdio *bus)
 				msleep(20);
 				brcmf_chip_set_passive(bus->ci);
 				brcmf_sdio_clkctl(bus, CLK_NONE, false);
-				sdio_release_host(bus->sdiodev->func1);
+				sdio_release_host(func1);
 			}
 			brcmf_chip_detach(bus->ci);
 		}
-		if (bus->sdiodev->settings)
-			brcmf_release_module_param(bus->sdiodev->settings);
+		if (sdiodev->settings)
+			brcmf_release_module_param(sdiodev->settings);
 
 		kfree(bus->rxbuf);
 		kfree(bus->hdrbuf);
@@ -4310,11 +4336,13 @@ void brcmf_sdio_wd_timer(struct brcmf_sdio *bus, bool active)
 
 int brcmf_sdio_sleep(struct brcmf_sdio *bus, bool sleep)
 {
+	struct brcmf_sdio_dev *sdiodev = bus->sdiodev;
+	struct sdio_func *func1 = sdiodev->func1;
 	int ret;
 
-	sdio_claim_host(bus->sdiodev->func1);
+	sdio_claim_host(func1);
 	ret = brcmf_sdio_bus_sleep(bus, sleep, false);
-	sdio_release_host(bus->sdiodev->func1);
+	sdio_release_host(func1);
 
 	return ret;
 }
-- 
2.11.0

Re: [PATCH 17/30] brcmfamc: remove unnecessary call to brcmf_sdiod_set_backplane_window()

[Julian Calaby]

Hi Ian,

On Tue, Aug 22, 2017 at 9:25 PM, Ian Molton <ian@mnementh.co.uk> wrote:
> All functions that might require the window address changing call
> brcmf_sdiod_set_backplane_window() prior to access. Thus resetting
> the window is not required.

Wouldn't it be more safe to write these sorts of functions so that
they set the window themselves instead of relying on the caller?

> Signed-off-by: Ian Molton <ian@mnementh.co.uk>
> ---
>  drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c | 5 -----
>  1 file changed, 5 deletions(-)
>
> diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
> index 0d37c68637f2..cabfab9a02a2 100644
> --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
> +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
> @@ -721,11 +721,6 @@ brcmf_sdiod_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address,
>
>         dev_kfree_skb(pkt);
>
> -       /* Return the window to backplane enumeration space for core access */
> -       if (brcmf_sdiod_set_backplane_window(sdiodev, sdiodev->sbwad))
> -               brcmf_err("FAILED to set window back to 0x%x\n",
> -                         sdiodev->sbwad);
> -
>         sdio_release_host(sdiodev->func[1]);
>
>         return err;
> --
> 2.11.0
>



-- 
Julian Calaby

Email: julian.calaby@gmail.com
Profile: http://www.google.com/profiles/julian.calaby/

Re: [PATCH 17/30] brcmfamc: remove unnecessary call to brcmf_sdiod_set_backplane_window()

[Arend van Spriel]

On 22-08-17 14:50, Julian Calaby wrote:
> Hi Ian,
> 
> On Tue, Aug 22, 2017 at 9:25 PM, Ian Molton <ian@mnementh.co.uk> wrote:
>> All functions that might require the window address changing call
>> brcmf_sdiod_set_backplane_window() prior to access. Thus resetting
>> the window is not required.
> 
> Wouldn't it be more safe to write these sorts of functions so that
> they set the window themselves instead of relying on the caller?

The function brcmf_sdiod_set_backplane_window() is a helper function by 
which these sorts of functions set the window themselves. It would be 
duplicating too much code as setting the window involves three register 
accesses (or so) on the device.

Regards,
Arend

Re: [PATCH v5] brcmfmac cleanup

[Arend van Spriel]

On 22-08-17 13:25, Ian Molton wrote:
> Hi folks,
> 
> Arend, as requested - a respin to take account of your comments.
> 
> Unfortunately, although I've only included the patches you requested from v4,
> breaking out some of the simpler changes (whitespace, macos, etc.) has grown
> the set back up to 30 patches. I hope this is OK.

:-( Grumbl, you also introduced some new ideas, eg. patch 26/30. I 
reviewed 15 patches that mostly involved in cleaning up bcmsdh.c. My 
hopes were that you addressed those 15 patches with a respin to get that 
part at least in for 4.14 as we are steadily moving towards the merge 
window. Maybe you did, but going from 15 to 30 feels like things are 
moving in the wrong direction. I will dig through it again.

Regards,
Arend

Re: [PATCH 17/30] brcmfamc: remove unnecessary call to brcmf_sdiod_set_backplane_window()

[Arend van Spriel]

On 22-08-17 21:38, Arend van Spriel wrote:
> On 22-08-17 14:50, Julian Calaby wrote:
>> Hi Ian,
>>
>> On Tue, Aug 22, 2017 at 9:25 PM, Ian Molton <ian@mnementh.co.uk> wrote:
>>> All functions that might require the window address changing call
>>> brcmf_sdiod_set_backplane_window() prior to access. Thus resetting
>>> the window is not required.
>>
>> Wouldn't it be more safe to write these sorts of functions so that
>> they set the window themselves instead of relying on the caller?
> 
> The function brcmf_sdiod_set_backplane_window() is a helper function by 
> which these sorts of functions set the window themselves. It would be 
> duplicating too much code as setting the window involves three register 
> accesses (or so) on the device.

By the way, the driver prefix in the subject is wrong, ie. brcmfamc 
should be brcmfmac. I think it already was wrong in the previous series, 
but I forgot to mention it.

Regards,
Arend

Re: [PATCH v5] brcmfmac cleanup

[Ian Molton]

On 22/08/17 20:41, Arend van Spriel wrote:
> On 22-08-17 13:25, Ian Molton wrote:
>> Hi folks,
>>
>> Arend, as requested - a respin to take account of your comments.
>>
>> Unfortunately, although I've only included the patches you requested
>> from v4,
>> breaking out some of the simpler changes (whitespace, macos, etc.) has
>> grown
>> the set back up to 30 patches. I hope this is OK.
> 
> :-( Grumbl, you also introduced some new ideas, eg. patch 26/30.

Oh, yeah. Forgot about that one, but its so uncontroversial I didn't see
the harm.

The same lines were touched in 25/30 and I didn't want to sneak the
change in there, as it felt dishonest to do so.

> I reviewed 15 patches that mostly involved in cleaning up bcmsdh.c. My
> hopes were that you addressed those 15 patches with a respin to get that
> part at least in for 4.14 as we are steadily moving towards the merge
> window. Maybe you did, but going from 15 to 30 feels like things are
> moving in the wrong direction. I will dig through it again.

I may have misunderstood, but you wrote:

"From this series I reviewed patches 1 upto and including patch 15, and
patches 29 through 34. Please rework those as requested and resubmit
them. Please also resubmit the remaining patch after that"

I took that to mean you wanted a respin that included 1-15 and 29-34.

- That would have been 21 patches on its own, but a couple of the later
ones drew in dependencies, and you asked me to break up a couple of
others, eg. whitespace.

Thats how we arrived at 30 patches again. I'm not attempting to take the
piss, I swear :)

I do appreciate the review. I've replied to your emails on the v4
series, so if you have a question as to why I've done something, you may
well find the answer there.

-Ian

Re: [PATCH 17/30] brcmfamc: remove unnecessary call to brcmf_sdiod_set_backplane_window()

[Ian Molton]

On 22/08/17 20:44, Arend van Spriel wrote:
> By the way, the driver prefix in the subject is wrong, ie. brcmfamc
> should be brcmfmac. I think it already was wrong in the previous series,
> but I forgot to mention it.

Drat. well spotted :)

-Ian

Re: [PATCH 17/30] brcmfamc: remove unnecessary call to brcmf_sdiod_set_backplane_window()

[Julian Calaby]

Hi Arend,

On Wed, Aug 23, 2017 at 5:38 AM, Arend van Spriel
<arend.vanspriel@broadcom.com> wrote:
> On 22-08-17 14:50, Julian Calaby wrote:
>>
>> Hi Ian,
>>
>> On Tue, Aug 22, 2017 at 9:25 PM, Ian Molton <ian@mnementh.co.uk> wrote:
>>>
>>> All functions that might require the window address changing call
>>> brcmf_sdiod_set_backplane_window() prior to access. Thus resetting
>>> the window is not required.
>>
>>
>> Wouldn't it be more safe to write these sorts of functions so that
>> they set the window themselves instead of relying on the caller?
>
>
> The function brcmf_sdiod_set_backplane_window() is a helper function by
> which these sorts of functions set the window themselves. It would be
> duplicating too much code as setting the window involves three register
> accesses (or so) on the device.

I don't think I explained my point well.

The description of this patch implies that this method
brcmf_sdiod_ramrw(), now relies on the window being set elsewhere
before it's called.

I'm asking why we can't move the setting of the window inside this
function and remove any redundant calls to
brcmf_sdiod_set_backplane_window() outside of it.

Thanks,

-- 
Julian Calaby

Email: julian.calaby@gmail.com
Profile: http://www.google.com/profiles/julian.calaby/

Re: [PATCH 17/30] brcmfamc: remove unnecessary call to brcmf_sdiod_set_backplane_window()

[Ian Molton]

On 23/08/17 11:09, Julian Calaby wrote:
> I don't think I explained my point well.
> 
> The description of this patch implies that this method
> brcmf_sdiod_ramrw(), now relies on the window being set elsewhere
> before it's called.

I don't think it does.

> I'm asking why we can't move the setting of the window inside this
> function and remove any redundant calls to
> brcmf_sdiod_set_backplane_window() outside of it.

We do call brcmf_sdiod_set_backplane_window() in this function. We just
dont need to call it a second time to restore the original window.

It may have been required in the past because the code relied on a value
not changing (swbadr) which was a poor assumption. In practice, the
current code does not provoke this potential bug, which I remove all
possibility of happening in patch 23/30

-Ian

Re: [PATCH 17/30] brcmfamc: remove unnecessary call to brcmf_sdiod_set_backplane_window()

[Julian Calaby]

Hi Ian,

On Wed, Aug 23, 2017 at 10:27 PM, Ian Molton <ian@mnementh.co.uk> wrote:
> On 23/08/17 11:09, Julian Calaby wrote:
>> I don't think I explained my point well.
>>
>> The description of this patch implies that this method
>> brcmf_sdiod_ramrw(), now relies on the window being set elsewhere
>> before it's called.
>
> I don't think it does.

"Resetting" can mean both changing it back after setting it to
something or changing it from some other state to a known one. I read
it as the latter.

>> I'm asking why we can't move the setting of the window inside this
>> function and remove any redundant calls to
>> brcmf_sdiod_set_backplane_window() outside of it.
>
> We do call brcmf_sdiod_set_backplane_window() in this function. We just
> dont need to call it a second time to restore the original window.

Ah, I do not have the full code in front of me, so I couldn't see
that, therefore my point is invalid.

Thanks,

-- 
Julian Calaby

Email: julian.calaby@gmail.com
Profile: http://www.google.com/profiles/julian.calaby/

Re: [PATCH 17/30] brcmfamc: remove unnecessary call to brcmf_sdiod_set_backplane_window()

[Ian Molton]

On 23/08/17 13:36, Julian Calaby wrote:
> Hi Ian,
> 
> On Wed, Aug 23, 2017 at 10:27 PM, Ian Molton <ian@mnementh.co.uk> wrote:
>> On 23/08/17 11:09, Julian Calaby wrote:
>>> I don't think I explained my point well.
>>>
>>> The description of this patch implies that this method
>>> brcmf_sdiod_ramrw(), now relies on the window being set elsewhere
>>> before it's called.
>>
>> I don't think it does.
> 
> "Resetting" can mean both changing it back after setting it to
> something or changing it from some other state to a known one. I read
> it as the latter.

True

>>> I'm asking why we can't move the setting of the window inside this
>>> function and remove any redundant calls to
>>> brcmf_sdiod_set_backplane_window() outside of it.
>>
>> We do call brcmf_sdiod_set_backplane_window() in this function. We just
>> dont need to call it a second time to restore the original window.
> 
> Ah, I do not have the full code in front of me, so I couldn't see
> that, therefore my point is invalid.

No worries.

-Ian

Re: [PATCH 01/30] brcmfmac: Fix parameter order in brcmf_sdiod_f0_writeb()

[Arend van Spriel]

On 22-08-17 13:25, Ian Molton wrote:
> 	All the other IO functions are the other way round in this
> driver. Make this one match.

Sorry for being a nit, but not sure why the commit message starts with a 
tab.

Other than that...

Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
> Signed-off-by: Ian Molton <ian@mnementh.co.uk>
> ---
>   drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c | 8 ++++----
>   1 file changed, 4 insertions(+), 4 deletions(-)

Re: [PATCH 03/30] brcmfmac: Split brcmf_sdiod_regrw_helper() up.

[Arend van Spriel]

On 22-08-17 13:25, Ian Molton wrote:
> 	This large function is concealing a LOT of obscure logic about
> how the hardware functions. Time to split it up.

Again the tab. Guess it is your default ;-)

> This first patch splits the function into two pieces - read and write,
> doing away with the rw flag in the process.
>
> Signed-off-by: Ian Molton <ian@mnementh.co.uk>
> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
> ---
>   .../wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c  | 94 +++++++++++++++++-----
>   1 file changed, 73 insertions(+), 21 deletions(-)
> 
> diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
> index 2b441ce91d5f..1ee0f91b6c50 100644
> --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
> +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
> @@ -302,8 +302,8 @@ static int brcmf_sdiod_request_data(struct brcmf_sdio_dev *sdiodev, u8 fn,
>   	return ret;
>   }
>   
> -static int brcmf_sdiod_regrw_helper(struct brcmf_sdio_dev *sdiodev, u32 addr,
> -				   u8 regsz, void *data, bool write)
> +static int brcmf_sdiod_reg_write(struct brcmf_sdio_dev *sdiodev, u32 addr,
> +				 u8 regsz, void *data)

Thought I mentioned this before, but the indentation should be aligned 
to opening bracket.

>   {
>   	u8 func;
>   	s32 retry = 0;

[...]

> +
> +static int brcmf_sdiod_reg_read(struct brcmf_sdio_dev *sdiodev, u32 addr,
> +				u8 regsz, void *data)

dito here.

Regards,
Arend

Re: [PATCH 12/30] brcmfmac: Whitespace fixes.

[Arend van Spriel]

On 22-08-17 13:25, Ian Molton wrote:

Maybe mention the function you are making whitespace changes in as it 
involves only one here.

Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
> Signed-off-by: Ian Molton <ian@mnementh.co.uk>
> ---
>   drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c | 3 ++-
>   1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
> index 916f75e5e7a1..d5d2b2222cc1 100644
> --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
> +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
> @@ -713,6 +713,7 @@ int brcmf_sdiod_send_buf(struct brcmf_sdio_dev *sdiodev, u8 *buf, uint nbytes)
>   	int err;
>   
>   	mypkt = brcmu_pkt_buf_get_skb(nbytes);
> +
>   	if (!mypkt) {
>   		brcmf_err("brcmu_pkt_buf_get_skb failed: len %d\n",
>   			  nbytes);
> @@ -727,8 +728,8 @@ int brcmf_sdiod_send_buf(struct brcmf_sdio_dev *sdiodev, u8 *buf, uint nbytes)
>   		err = brcmf_sdiod_buff_write(sdiodev, SDIO_FUNC_2, addr, mypkt);
>   
>   	brcmu_pkt_buf_free_skb(mypkt);
> -	return err;
>   
> +	return err;
>   }
>   
>   int brcmf_sdiod_send_pkt(struct brcmf_sdio_dev *sdiodev,
> 

Re: [PATCH 13/30] brcmfmac: Clarify if using braces.

[Arend van Spriel]

On 22-08-17 13:25, Ian Molton wrote:
> Whilst this if () statement is technically correct, it lacks clarity.

I don't see the unclarity here. In my opinion people reading the code 
should have a good level in C language and a decent level of curiosity 
when they come across a function/macro like skb_queue_walk().

Regards,
Arend

Re: [PATCH 15/30] brcmfmac: Tidy register definitions a little

[Arend van Spriel]

On 22-08-17 13:25, Ian Molton wrote:
> Trivial tidy of register definitions.

Thought I already did, but....

Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
> Signed-off-by: Ian Molton <ian@mnementh.co.uk>
> ---
>   .../net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c |  4 ++--
>   .../net/wireless/broadcom/brcm80211/brcmfmac/sdio.h   | 19 ++++++++++---------
>   2 files changed, 12 insertions(+), 11 deletions(-)

Re: [PATCH 18/30] brcmfmac: Cleanup offsetof()

[Arend van Spriel]

On 22-08-17 13:25, Ian Molton wrote:
> Create a macro to make the code a bit more readable, whilst we're stuck
> with using struct element offsets as register offsets.

Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
> Signed-off-by: Ian Molton <ian@mnementh.co.uk>
> ---
>   .../wireless/broadcom/brcm80211/brcmfmac/sdio.c    | 35 +++++++++-------------
>   1 file changed, 14 insertions(+), 21 deletions(-)
> 
> diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
> index ce19ccf5d1d6..8f3e99da871a 100644
> --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
> +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
> @@ -161,6 +161,8 @@ struct rte_console {
>   
>   #define CORE_BUS_REG(base, field) \
>   		(base + offsetof(struct sdpcmd_regs, field))
> +#define __sd_reg(field) \
> +		(offsetof(struct sdpcmd_regs, field))

I really dislike __foo() stuff. Please just stick with uppercase for 
macros, so SD_REG(). I am fine with dropping the base here.

Re: [PATCH 19/30] brcmfmac: Remove unused macro.

[Arend van Spriel]

On 22-08-17 13:25, Ian Molton wrote:
> This macro is used exactly nowhere in the code. Delete it.

this removal could have been done in previous patch making that one a 
rename/change of the macro. Anyway....

Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
> Signed-off-by: Ian Molton <ian@mnementh.co.uk>
> ---
>   drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 2 --
>   1 file changed, 2 deletions(-)

Re: [PATCH 20/30] brcmfmac: Remove repeated calls to brcmf_chip_get_core()

[Arend van Spriel]

On 22-08-17 13:25, Ian Molton wrote:
> There is no need to repeatdly call brcmf_chip_get_core(), which
> traverses a list of cores every time its called (including during
> register access code!).
> 
> Call it once, and store a pointer to the core structure. The existing
> code does nto keep track of users of the cores anyway, and even so, this
> will allow for easier refcounting in future.

Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
> Signed-off-by: Ian Molton <ian@mnementh.co.uk>
> ---
>   .../wireless/broadcom/brcm80211/brcmfmac/sdio.c    | 25 +++++++++++++---------
>   1 file changed, 15 insertions(+), 10 deletions(-)

Re: [PATCH 01/30] brcmfmac: Fix parameter order in brcmf_sdiod_f0_writeb()

[Ian Molton]

On 30/08/17 19:51, Arend van Spriel wrote:
> On 22-08-17 13:25, Ian Molton wrote:
>>     All the other IO functions are the other way round in this
>> driver. Make this one match.
> 
> Sorry for being a nit, but not sure why the commit message starts with a
> tab.

Not a problem - I don't mind nits being pointed out. Not at all.

> Other than that...

Will update it in the next (hopefully last!) rev.

> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>

Ta :)

>> Signed-off-by: Ian Molton <ian@mnementh.co.uk>
>> ---
>>   drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c | 8 ++++----
>>   1 file changed, 4 insertions(+), 4 deletions(-)

-Ian

Re: [PATCH 03/30] brcmfmac: Split brcmf_sdiod_regrw_helper() up.

[Ian Molton]

On 30/08/17 19:59, Arend van Spriel wrote:
>> +static int brcmf_sdiod_reg_write(struct brcmf_sdio_dev *sdiodev, u32
>> addr,
>> +                 u8 regsz, void *data)
> 
> Thought I mentioned this before, but the indentation should be aligned
> to opening bracket.

I checked this locally, and its fine. I suspect its getting mangled
somewhere along the way.

It looks fine in my original email - I see 4 tabs and a space.

-Ian

Re: [PATCH 13/30] brcmfmac: Clarify if using braces.

[Ian Molton]

On 30/08/17 20:11, Arend van Spriel wrote:
>> Whilst this if () statement is technically correct, it lacks clarity.
> 
> I don't see the unclarity here. In my opinion people reading the code
> should have a good level in C language and a decent level of curiosity
> when they come across a function/macro like skb_queue_walk().

I thought it to be part of the general codingstyle for the kernel that
multi-line ifs and elses should be in braces, although I accept that
technically the if-clause is a single block-level statement.

Having said that, *this* specific example falls into a grey area in the
codingstyle, which covers multi-statement, multi-line if() clauses and
single-statement, single-line ones. It does not cover single-statement,
multi-line examples such as the one here.

Whilst I can't therefore definitively justify my position, I can show,
for example, line 999 in net/mac80211/iface.c where a for() statement
uses braces around the skb_queue_walk()

for (i = 0; i < IEEE80211_MAX_QUEUES; i++) {
        skb_queue_walk_safe(&local->pending[i], skb, tmp) {
                struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
                if (info->control.vif == &sdata->vif) {
                        __skb_unlink(skb, &local->pending[i]);
                        ieee80211_free_txskb(&local->hw, skb);
                }
        }
}


And the following in ath9k_htc_tx_cleanup_queue()

if (process) {
        skb_queue_walk_safe(&queue, skb, tmp) {
                __skb_unlink(skb, &queue);
                ath9k_htc_tx_process(priv, skb, NULL);
        }
}

So I feel that we should do the same.

-Ian

Re: [PATCH 18/30] brcmfmac: Cleanup offsetof()

[Ian Molton]

On 30/08/17 20:37, Arend van Spriel wrote:
> On 22-08-17 13:25, Ian Molton wrote:
>> +#define __sd_reg(field) \
>> +        (offsetof(struct sdpcmd_regs, field))
> 
> I really dislike __foo() stuff. Please just stick with uppercase for
> macros, so SD_REG(). I am fine with dropping the base here.

I'm fine with that. Will change.

-Ian

Re: [PATCH 28/30] brcmfmac: Clean up interrupt macros

[Arend van Spriel]

On 22-08-17 13:25, Ian Molton wrote:
> Make it more obvious that this code acually enables interrupts, and
> provide nice definitions for the bits in the register.

Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
> Signed-off-by: Ian Molton <ian@mnementh.co.uk>
> ---
>   drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c | 3 ++-
>   drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h   | 8 +++++---
>   2 files changed, 7 insertions(+), 4 deletions(-)

Re: [PATCH 21/30] brcmfmac: Remove {r,w}_sdreg32

[Arend van Spriel]

On 22-08-17 13:25, Ian Molton wrote:
> Remove yet another IO function from the code and replace with one
> that already exists.

Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
> Signed-off-by: Ian Molton <ian@mnementh.co.uk>
> ---
>   .../wireless/broadcom/brcm80211/brcmfmac/sdio.c    | 91 +++++++++++-----------
>   1 file changed, 45 insertions(+), 46 deletions(-)
> 
> diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
> index 289ff61b7bf8..c1f3366871e5 100644
> --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
> +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c

[...]

> @@ -1075,6 +1051,8 @@ static void brcmf_sdio_get_console_addr(struct brcmf_sdio *bus)
>   
>   static u32 brcmf_sdio_hostmail(struct brcmf_sdio *bus)
>   {
> +	struct brcmf_sdio_dev *sdiod = bus->sdiodev;
> +	struct brcmf_core *core = bus->sdio_core;
>   	u32 intstatus = 0;
>   	u32 hmb_data;
>   	u8 fcbits;
> @@ -1083,10 +1061,13 @@ static u32 brcmf_sdio_hostmail(struct brcmf_sdio *bus)
>   	brcmf_dbg(SDIO, "Enter\n");
>   
>   	/* Read mailbox data and ack that we did so */
> -	ret = r_sdreg32(bus, &hmb_data,	__sd_reg(tohostmailboxdata));
> +	hmb_data = brcmf_sdiod_readl(sdiod, core->base +
> +					__sd_reg(tohostmailboxdata), &ret);

Please keep the address calculation (base + offset) in one line.

> +
> +	if (!ret)
> +		brcmf_sdiod_writel(sdiod, core->base + __sd_reg(tosbmailbox),
> +				   SMB_INT_ACK, &ret);
>   
> -	if (ret == 0)
> -		w_sdreg32(bus, SMB_INT_ACK, __sd_reg(tosbmailbox));
>   	bus->sdcnt.f1regdata += 2;
>   
>   	/* Dongle recomposed rx frames, accept them again */

[...]

> @@ -4044,7 +4041,9 @@ static void brcmf_sdio_firmware_callback(struct device *dev, int err,
>   	if (!err) {
>   		/* Set up the interrupt mask and enable interrupts */
>   		bus->hostintmask = HOSTINTMASK;
> -		w_sdreg32(bus, bus->hostintmask, __sd_reg(hostintmask));
> +		brcmf_sdiod_writel(sdiod, core->base + __sd_reg(hostintmask),
> +				   bus->hostintmask, NULL);
> +
>   
>   		brcmf_sdiod_writeb(sdiodev, SBSDIO_WATERMARK, 8, &err);

It seems this function has two pointer variables, ie. sdiod and sdiodev, 
pointing to the same instance.

>   	} else {
> 

Re: [PATCH 22/30] brcmfmac: Rename buscore->core for consistency

[Arend van Spriel]

On 22-08-17 13:25, Ian Molton wrote:
> Avoid confusion with unrelated _buscore labels.

Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
> Signed-off-by: Ian Molton <ian@mnementh.co.uk>
> ---
>   drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 11 +++++------
>   1 file changed, 5 insertions(+), 6 deletions(-)

Re: [PATCH 23/30] brcmfmac: stabilise the value of ->sbwad in use for some xfer routines.

[Arend van Spriel]

On 22-08-17 13:25, Ian Molton wrote:
> The IO functions operate within the Chipcommon IO window. Explicitly
> set this, rather than relying on the last initialisation IO access to
> leave it set to the right value by chance.

Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
> Signed-off-by: Ian Molton <ian@mnementh.co.uk>
> ---
>   drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c | 8 ++++----
>   drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c   | 5 +++++
>   drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h   | 1 +
>   3 files changed, 10 insertions(+), 4 deletions(-)

Re: [PATCH 24/30] brcmfmac: Correctly handle accesses to SDIO func0

[Arend van Spriel]

On 22-08-17 13:25, Ian Molton wrote:
> Rather than workaround the restrictions on func0 addressing in the
> driver, set MMC_QUIRK_LENIENT_FN0

Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
> Signed-off-by: Ian Molton <ian@mnementh.co.uk>
> ---
>   drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c | 4 ++++
>   drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h   | 4 ++--
>   2 files changed, 6 insertions(+), 2 deletions(-)

Re: [PATCH 25/30] brcmfmac: Remove func0 from function array

[Arend van Spriel]

On 22-08-17 13:25, Ian Molton wrote:
> Linux doesnt pass you func0 as a function when probing - instead
> providing specific access functions to read/write it.
> 
> This prepares for a patch to remove the actual array entry itself.

Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
> Signed-off-by: Ian Molton <ian@mnementh.co.uk>
> 
> # Conflicts:
> #	drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
> ---
>   drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c |  5 +----
>   drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c   | 10 +++++++---
>   drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h   | 13 ++++++-------
>   3 files changed, 14 insertions(+), 14 deletions(-)

Re: [PATCH 26/30] brcmfmac: More efficient and slightly easier to read fixup for 4339 chips

[Arend van Spriel]

On 22-08-17 13:25, Ian Molton wrote:
> Its more efficient to test the register we're interested in first,
> potentially avoiding two more comparisons, and therefore always avoiding
> one comparison per call on all other chips.

Efficiency is really not a big issue. The buscore callbacks are really 
only used during chip recognition so this feels like change for sake of 
change. Not my favorite.

> Signed-off-by: Ian Molton <ian@mnementh.co.uk>
> ---
>   drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 9 ++++++---
>   1 file changed, 6 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
> index 7ebe6460cb5c..8a730133db77 100644
> --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
> +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
> @@ -3766,15 +3766,18 @@ static u32 brcmf_sdio_buscore_read32(void *ctx, u32 addr)
>   	/* Force 4339 chips over rev2 to use the same ID */
>   	/* This is borderline tolerable whilst there is only two exceptions */
>   	/* But could be handled better */

This is not correct way to do multi-line comment and the story is not 
quite correct or maybe I do not understand what is written here.

> -	if ((sdiodev->func[1]->device == SDIO_DEVICE_ID_BROADCOM_4335_4339 ||
> -	     sdiodev->func[1]->device == SDIO_DEVICE_ID_BROADCOM_4339) &&
> -	     addr == CORE_CC_REG(SI_ENUM_BASE, chipid)) {
> +	if (addr == CORE_CC_REG(SI_ENUM_BASE, chipid) &&
> +	    (sdiodev->func[1]->device == SDIO_DEVICE_ID_BROADCOM_4339 ||
> +	     sdiodev->func[1]->device == SDIO_DEVICE_ID_BROADCOM_4335_4339)) {
> +
>   		rev = (val & CID_REV_MASK) >> CID_REV_SHIFT;
> +
>   		if (rev >= 2) {
>   			val &= ~CID_ID_MASK;
>   			val |= BRCM_CC_4339_CHIP_ID;
>   		}
>   	}
> +
>   	return val;
>   }
>   
> 

Re: [PATCH 27/30] brcmfmac: Replace function index with function pointer

[Arend van Spriel]

On 22-08-17 13:25, Ian Molton wrote:
> In preparation for removing the function array, remove all code that
> refers to function by index and replace with pointers to the function
> itself.

Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
> Signed-off-by: Ian Molton <ian@mnementh.co.uk>
> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
> 
> # Conflicts:
> #	drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
> ---
>   .../wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c  | 83 ++++++++++++----------
>   .../wireless/broadcom/brcm80211/brcmfmac/sdio.c    | 15 ++--
>   .../wireless/broadcom/brcm80211/brcmfmac/sdio.h    |  6 +-
>   3 files changed, 54 insertions(+), 50 deletions(-)

Re: [PATCH 30/30] brcmfmac: Reduce the noise from repeatedly dereferencing common pointers

[Arend van Spriel]

On 22-08-17 13:25, Ian Molton wrote:
> This introduces no functional changes, but makes the code drastically more
> readable, reducing the amount of dereferencing performed inside functions
> throughout the SDIO core.
> 
> For example, reduce:
> 	sdio_release_host(bus->sdiodev->func1);
> to:
> 	sdio_release_host(func1);

I still have problems with this change. The example above does not 
convince me. I explained my rule of thumb regarding using dereferences 
and will stick to that.

> Fixup a few inconsistently named pointers whilst we are at it ie.
> 
> sdiod -> sdiodev
> 
> Signed-off-by: Ian Molton <ian@mnementh.co.uk>
> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
> ---
>   .../wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c  | 140 +++----
>   .../wireless/broadcom/brcm80211/brcmfmac/sdio.c    | 406 +++++++++++----------
>   2 files changed, 293 insertions(+), 253 deletions(-)

All I see is 40 more lines to read.

Regards,
Arend