[PATCH v3 0/4] Introduce pmu-events support for HiFive Unmatched

[PATCH v3 0/4] Introduce pmu-events support for HiFive Unmatched

[Nikita Shubin]

From: Nikita Shubin <n.shubin@yadro.com>

This series of patches introduces support for the RISC-V PMU identification and raw events matching between perf and the PMU.
The HiFive Unmatched board can now use all the counters with named events.

Unfortunately Mario is no longer interested in submitting this series, as there were no objections to v2 series, besides DT 
bindings which reside in U-Boot and shouldn't be exposed to Linux, i resending mostly original series with small sysfs pmu id fix.

See original cover letter by João Mário Domingos:
https://patchwork.kernel.org/project/linux-riscv/cover/20211116154812.17008-1-joao.mario@tecnico.ulisboa.pt/

Following addition was made to U-Boot device tree:
```
pmu {
	compatible = "riscv,pmu";
	riscv,event-to-mhpmcounters =
		<0x03 0x06 0x18
		0x10001 0x10002 0x18
		0x10009 0x10009 0x18
		0x10011 0x10011 0x18
		0x10019 0x10019 0x18
		0x10021 0x10021 0x18>;
	riscv,event-to-mhpmevent =
		<0x03 0x00000000 0x1801
		0x04 0x00000000 0x0302
		0x05 0x00000000 0x4000
		0x06 0x00000000 0x6001
		0x10001 0x00000000 0x0202
		0x10002 0x00000000 0x0402
		0x10009 0x00000000 0x0102
		0x10011 0x00000000 0x2002
		0x10019 0x00000000 0x1002
		0x10021 0x00000000 0x0802>;
	riscv,raw-event-to-mhpmcounters =
		<0x00000000 0x03ffff00 0x0 0x0 0x18
		0x00000000 0x0007ff01 0x0 0x1 0x18
		0x00000000 0x00003f02 0x0 0x2 0x18>;
};
```

Tested on the top of v5.19 which contains Atish Patra PMU series.

---
Changes in v3:
  - Change 'soc/soc:pmu/id' to 'riscv-pmu/id'
Changes in v2:
  - Fix compilation errors and warnings
  - Remove space idents
  - Correct formatting
---

João Mário Domingos (4):
  RISC-V: Create unique identification for SoC PMU
  RISC-V: Support CPUID for risc-v in perf
  RISC-V: Added generic pmu-events mapfile
  RISC-V: Added HiFive Unmatched PMU events

 arch/riscv/kernel/sbi.c                       |  3 +
 drivers/perf/riscv_pmu.c                      | 18 ++++
 drivers/perf/riscv_pmu_sbi.c                  | 47 ++++++++++
 tools/perf/arch/riscv/util/Build              |  1 +
 tools/perf/arch/riscv/util/header.c           | 66 +++++++++++++
 tools/perf/pmu-events/arch/riscv/mapfile.csv  | 15 +++
 .../pmu-events/arch/riscv/riscv-generic.json  | 20 ++++
 .../arch/riscv/sifive/u74/instructions.json   | 92 +++++++++++++++++++
 .../arch/riscv/sifive/u74/memory.json         | 32 +++++++
 .../arch/riscv/sifive/u74/microarch.json      | 57 ++++++++++++
 10 files changed, 351 insertions(+)
 create mode 100644 tools/perf/arch/riscv/util/header.c
 create mode 100644 tools/perf/pmu-events/arch/riscv/mapfile.csv
 create mode 100644 tools/perf/pmu-events/arch/riscv/riscv-generic.json
 create mode 100644 tools/perf/pmu-events/arch/riscv/sifive/u74/instructions.json
 create mode 100644 tools/perf/pmu-events/arch/riscv/sifive/u74/memory.json
 create mode 100644 tools/perf/pmu-events/arch/riscv/sifive/u74/microarch.json

-- 
2.35.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH v3 1/4] RISC-V: Create unique identification for SoC PMU

[Nikita Shubin]

From: João Mário Domingos <joao.mario@tecnico.ulisboa.pt>

The SBI PMU platform driver did not provide any identification for
perf events matching. This patch introduces a new sysfs file inside the
platform device (soc:pmu/id) for pmu identification.

The identification is a 64-bit value generated as:
[63-32]: mvendorid;
[31]: marchid[MSB];
[30-16]: marchid[15-0];
[15-0]: mimpid[15MSBs];

The CSRs are detailed in the RISC-V privileged spec [1].
The marchid is split in MSB + 15LSBs, due to the MSB being used for
open-source architecture identification.

[1] https://github.com/riscv/riscv-isa-manual

Signed-off-by: João Mário Domingos <joao.mario@tecnico.ulisboa.pt>
Tested-by: Nikita Shubin <n.shubin@yadro.com>
---
 arch/riscv/kernel/sbi.c      |  3 +++
 drivers/perf/riscv_pmu_sbi.c | 47 ++++++++++++++++++++++++++++++++++++
 2 files changed, 50 insertions(+)

diff --git a/arch/riscv/kernel/sbi.c b/arch/riscv/kernel/sbi.c
index 775d3322b422..50dd9b6ecc9e 100644
--- a/arch/riscv/kernel/sbi.c
+++ b/arch/riscv/kernel/sbi.c
@@ -627,16 +627,19 @@ long sbi_get_mvendorid(void)
 {
 	return __sbi_base_ecall(SBI_EXT_BASE_GET_MVENDORID);
 }
+EXPORT_SYMBOL(sbi_get_mvendorid);
 
 long sbi_get_marchid(void)
 {
 	return __sbi_base_ecall(SBI_EXT_BASE_GET_MARCHID);
 }
+EXPORT_SYMBOL(sbi_get_marchid);
 
 long sbi_get_mimpid(void)
 {
 	return __sbi_base_ecall(SBI_EXT_BASE_GET_MIMPID);
 }
+EXPORT_SYMBOL(sbi_get_mimpid);
 
 static void sbi_send_cpumask_ipi(const struct cpumask *target)
 {
diff --git a/drivers/perf/riscv_pmu_sbi.c b/drivers/perf/riscv_pmu_sbi.c
index a1317a483512..15ab3dc68e7a 100644
--- a/drivers/perf/riscv_pmu_sbi.c
+++ b/drivers/perf/riscv_pmu_sbi.c
@@ -693,6 +693,46 @@ static int pmu_sbi_setup_irqs(struct riscv_pmu *pmu, struct platform_device *pde
 	return 0;
 }
 
+static uint64_t pmu_sbi_get_pmu_id(void)
+{
+	union sbi_pmu_id {
+		uint64_t value;
+		struct {
+			uint16_t imp:16;
+			uint16_t arch:16;
+			uint32_t vendor:32;
+		};
+	} pmuid;
+
+	pmuid.value = 0;
+	pmuid.vendor = (uint32_t) sbi_get_mvendorid();
+	pmuid.arch = (sbi_get_marchid() >> (63 - 15) & (1 << 15)) | (sbi_get_marchid() & 0x7FFF);
+	pmuid.imp = (sbi_get_mimpid() >> 16);
+
+	return pmuid.value;
+}
+
+static ssize_t pmu_sbi_id_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	int len;
+
+	len = sprintf(buf, "0x%llx\n", pmu_sbi_get_pmu_id());
+	if (len <= 0)
+		dev_err(dev, "mydrv: Invalid sprintf len: %dn", len);
+
+	return len;
+}
+
+static DEVICE_ATTR(id, S_IRUGO | S_IWUSR, pmu_sbi_id_show, 0);
+
+static struct attribute *pmu_sbi_attrs[] = {
+	&dev_attr_id.attr,
+	NULL
+};
+
+ATTRIBUTE_GROUPS(pmu_sbi);
+
 static int pmu_sbi_device_probe(struct platform_device *pdev)
 {
 	struct riscv_pmu *pmu = NULL;
@@ -729,6 +769,13 @@ static int pmu_sbi_device_probe(struct platform_device *pdev)
 	pmu->ctr_clear_idx = pmu_sbi_ctr_clear_idx;
 	pmu->ctr_read = pmu_sbi_ctr_read;
 
+	ret = sysfs_create_group(&pdev->dev.kobj, &pmu_sbi_group);
+	if (ret) {
+		dev_err(&pdev->dev, "sysfs creation failed\n");
+		return ret;
+	}
+	pdev->dev.groups = pmu_sbi_groups;
+
 	ret = cpuhp_state_add_instance(CPUHP_AP_PERF_RISCV_STARTING, &pmu->node);
 	if (ret)
 		return ret;
-- 
2.35.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH v3 1/4] RISC-V: Create unique identification for SoC PMU

[Nikita Shubin]

From: João Mário Domingos <joao.mario@tecnico.ulisboa.pt>

The SBI PMU platform driver did not provide any identification for
perf events matching. This patch introduces a new sysfs file inside the
platform device (soc:pmu/id) for pmu identification.

The identification is a 64-bit value generated as:
[63-32]: mvendorid;
[31]: marchid[MSB];
[30-16]: marchid[15-0];
[15-0]: mimpid[15MSBs];

The CSRs are detailed in the RISC-V privileged spec [1].
The marchid is split in MSB + 15LSBs, due to the MSB being used for
open-source architecture identification.

[1] https://github.com/riscv/riscv-isa-manual

Signed-off-by: João Mário Domingos <joao.mario@tecnico.ulisboa.pt>
Tested-by: Nikita Shubin <n.shubin@yadro.com>
---
 arch/riscv/kernel/sbi.c      |  3 +++
 drivers/perf/riscv_pmu_sbi.c | 47 ++++++++++++++++++++++++++++++++++++
 2 files changed, 50 insertions(+)

diff --git a/arch/riscv/kernel/sbi.c b/arch/riscv/kernel/sbi.c
index 775d3322b422..50dd9b6ecc9e 100644
--- a/arch/riscv/kernel/sbi.c
+++ b/arch/riscv/kernel/sbi.c
@@ -627,16 +627,19 @@ long sbi_get_mvendorid(void)
 {
 	return __sbi_base_ecall(SBI_EXT_BASE_GET_MVENDORID);
 }
+EXPORT_SYMBOL(sbi_get_mvendorid);
 
 long sbi_get_marchid(void)
 {
 	return __sbi_base_ecall(SBI_EXT_BASE_GET_MARCHID);
 }
+EXPORT_SYMBOL(sbi_get_marchid);
 
 long sbi_get_mimpid(void)
 {
 	return __sbi_base_ecall(SBI_EXT_BASE_GET_MIMPID);
 }
+EXPORT_SYMBOL(sbi_get_mimpid);
 
 static void sbi_send_cpumask_ipi(const struct cpumask *target)
 {
diff --git a/drivers/perf/riscv_pmu_sbi.c b/drivers/perf/riscv_pmu_sbi.c
index a1317a483512..15ab3dc68e7a 100644
--- a/drivers/perf/riscv_pmu_sbi.c
+++ b/drivers/perf/riscv_pmu_sbi.c
@@ -693,6 +693,46 @@ static int pmu_sbi_setup_irqs(struct riscv_pmu *pmu, struct platform_device *pde
 	return 0;
 }
 
+static uint64_t pmu_sbi_get_pmu_id(void)
+{
+	union sbi_pmu_id {
+		uint64_t value;
+		struct {
+			uint16_t imp:16;
+			uint16_t arch:16;
+			uint32_t vendor:32;
+		};
+	} pmuid;
+
+	pmuid.value = 0;
+	pmuid.vendor = (uint32_t) sbi_get_mvendorid();
+	pmuid.arch = (sbi_get_marchid() >> (63 - 15) & (1 << 15)) | (sbi_get_marchid() & 0x7FFF);
+	pmuid.imp = (sbi_get_mimpid() >> 16);
+
+	return pmuid.value;
+}
+
+static ssize_t pmu_sbi_id_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	int len;
+
+	len = sprintf(buf, "0x%llx\n", pmu_sbi_get_pmu_id());
+	if (len <= 0)
+		dev_err(dev, "mydrv: Invalid sprintf len: %dn", len);
+
+	return len;
+}
+
+static DEVICE_ATTR(id, S_IRUGO | S_IWUSR, pmu_sbi_id_show, 0);
+
+static struct attribute *pmu_sbi_attrs[] = {
+	&dev_attr_id.attr,
+	NULL
+};
+
+ATTRIBUTE_GROUPS(pmu_sbi);
+
 static int pmu_sbi_device_probe(struct platform_device *pdev)
 {
 	struct riscv_pmu *pmu = NULL;
@@ -729,6 +769,13 @@ static int pmu_sbi_device_probe(struct platform_device *pdev)
 	pmu->ctr_clear_idx = pmu_sbi_ctr_clear_idx;
 	pmu->ctr_read = pmu_sbi_ctr_read;
 
+	ret = sysfs_create_group(&pdev->dev.kobj, &pmu_sbi_group);
+	if (ret) {
+		dev_err(&pdev->dev, "sysfs creation failed\n");
+		return ret;
+	}
+	pdev->dev.groups = pmu_sbi_groups;
+
 	ret = cpuhp_state_add_instance(CPUHP_AP_PERF_RISCV_STARTING, &pmu->node);
 	if (ret)
 		return ret;
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 1/4] RISC-V: Create unique identification for SoC PMU

[Nikita Shubin]

From: João Mário Domingos <joao.mario@tecnico.ulisboa.pt>

The SBI PMU platform driver did not provide any identification for
perf events matching. This patch introduces a new sysfs file inside the
platform device (soc:pmu/id) for pmu identification.

The identification is a 64-bit value generated as:
[63-32]: mvendorid;
[31]: marchid[MSB];
[30-16]: marchid[15-0];
[15-0]: mimpid[15MSBs];

The CSRs are detailed in the RISC-V privileged spec [1].
The marchid is split in MSB + 15LSBs, due to the MSB being used for
open-source architecture identification.

[1] https://github.com/riscv/riscv-isa-manual

Signed-off-by: João Mário Domingos <joao.mario@tecnico.ulisboa.pt>
Tested-by: Nikita Shubin <n.shubin@yadro.com>
---
 arch/riscv/kernel/sbi.c      |  3 +++
 drivers/perf/riscv_pmu_sbi.c | 47 ++++++++++++++++++++++++++++++++++++
 2 files changed, 50 insertions(+)

diff --git a/arch/riscv/kernel/sbi.c b/arch/riscv/kernel/sbi.c
index 775d3322b422..50dd9b6ecc9e 100644
--- a/arch/riscv/kernel/sbi.c
+++ b/arch/riscv/kernel/sbi.c
@@ -627,16 +627,19 @@ long sbi_get_mvendorid(void)
 {
 	return __sbi_base_ecall(SBI_EXT_BASE_GET_MVENDORID);
 }
+EXPORT_SYMBOL(sbi_get_mvendorid);
 
 long sbi_get_marchid(void)
 {
 	return __sbi_base_ecall(SBI_EXT_BASE_GET_MARCHID);
 }
+EXPORT_SYMBOL(sbi_get_marchid);
 
 long sbi_get_mimpid(void)
 {
 	return __sbi_base_ecall(SBI_EXT_BASE_GET_MIMPID);
 }
+EXPORT_SYMBOL(sbi_get_mimpid);
 
 static void sbi_send_cpumask_ipi(const struct cpumask *target)
 {
diff --git a/drivers/perf/riscv_pmu_sbi.c b/drivers/perf/riscv_pmu_sbi.c
index a1317a483512..15ab3dc68e7a 100644
--- a/drivers/perf/riscv_pmu_sbi.c
+++ b/drivers/perf/riscv_pmu_sbi.c
@@ -693,6 +693,46 @@ static int pmu_sbi_setup_irqs(struct riscv_pmu *pmu, struct platform_device *pde
 	return 0;
 }
 
+static uint64_t pmu_sbi_get_pmu_id(void)
+{
+	union sbi_pmu_id {
+		uint64_t value;
+		struct {
+			uint16_t imp:16;
+			uint16_t arch:16;
+			uint32_t vendor:32;
+		};
+	} pmuid;
+
+	pmuid.value = 0;
+	pmuid.vendor = (uint32_t) sbi_get_mvendorid();
+	pmuid.arch = (sbi_get_marchid() >> (63 - 15) & (1 << 15)) | (sbi_get_marchid() & 0x7FFF);
+	pmuid.imp = (sbi_get_mimpid() >> 16);
+
+	return pmuid.value;
+}
+
+static ssize_t pmu_sbi_id_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	int len;
+
+	len = sprintf(buf, "0x%llx\n", pmu_sbi_get_pmu_id());
+	if (len <= 0)
+		dev_err(dev, "mydrv: Invalid sprintf len: %dn", len);
+
+	return len;
+}
+
+static DEVICE_ATTR(id, S_IRUGO | S_IWUSR, pmu_sbi_id_show, 0);
+
+static struct attribute *pmu_sbi_attrs[] = {
+	&dev_attr_id.attr,
+	NULL
+};
+
+ATTRIBUTE_GROUPS(pmu_sbi);
+
 static int pmu_sbi_device_probe(struct platform_device *pdev)
 {
 	struct riscv_pmu *pmu = NULL;
@@ -729,6 +769,13 @@ static int pmu_sbi_device_probe(struct platform_device *pdev)
 	pmu->ctr_clear_idx = pmu_sbi_ctr_clear_idx;
 	pmu->ctr_read = pmu_sbi_ctr_read;
 
+	ret = sysfs_create_group(&pdev->dev.kobj, &pmu_sbi_group);
+	if (ret) {
+		dev_err(&pdev->dev, "sysfs creation failed\n");
+		return ret;
+	}
+	pdev->dev.groups = pmu_sbi_groups;
+
 	ret = cpuhp_state_add_instance(CPUHP_AP_PERF_RISCV_STARTING, &pmu->node);
 	if (ret)
 		return ret;
-- 
2.35.1

[PATCH v3 2/4] RISC-V: Support CPUID for risc-v in perf

[Nikita Shubin]

From: João Mário Domingos <joao.mario@tecnico.ulisboa.pt>

This patch creates the header.c file for the risc-v architecture and introduces support for
PMU identification through sysfs.
It is now possible to configure pmu-events in risc-v.

Depends on patch [1], that introduces the id sysfs file.

Signed-off-by: João Mário Domingos <joao.mario@tecnico.ulisboa.pt>
[Nikita: replaced soc:pmu to riscv-pmu/id]
Signed-off-by: Nikita Shubin <n.shubin@yadro.com>
Tested-by: Nikita Shubin <n.shubin@yadro.com>
---
v2->v3:
- Change 'soc/soc:pmu/id' to 'riscv-pmu/id'
---
 drivers/perf/riscv_pmu.c            | 18 ++++++++
 tools/perf/arch/riscv/util/Build    |  1 +
 tools/perf/arch/riscv/util/header.c | 66 +++++++++++++++++++++++++++++
 3 files changed, 85 insertions(+)
 create mode 100644 tools/perf/arch/riscv/util/header.c

diff --git a/drivers/perf/riscv_pmu.c b/drivers/perf/riscv_pmu.c
index b2b8d2074ed0..d1aa4e0e527f 100644
--- a/drivers/perf/riscv_pmu.c
+++ b/drivers/perf/riscv_pmu.c
@@ -17,6 +17,23 @@
 
 #include <asm/sbi.h>
 
+PMU_FORMAT_ATTR(event, "config:0-63");
+
+static struct attribute *riscv_arch_formats_attr[] = {
+	&format_attr_event.attr,
+	NULL,
+};
+
+static struct attribute_group riscv_pmu_format_group = {
+	.name = "format",
+	.attrs = riscv_arch_formats_attr,
+};
+
+static const struct attribute_group *riscv_pmu_attr_groups[] = {
+	&riscv_pmu_format_group,
+	NULL,
+};
+
 static unsigned long csr_read_num(int csr_num)
 {
 #define switchcase_csr_read(__csr_num, __val)		{\
@@ -307,6 +324,7 @@ struct riscv_pmu *riscv_pmu_alloc(void)
 			cpuc->events[i] = NULL;
 	}
 	pmu->pmu = (struct pmu) {
+		.attr_groups	= riscv_pmu_attr_groups,
 		.event_init	= riscv_pmu_event_init,
 		.add		= riscv_pmu_add,
 		.del		= riscv_pmu_del,
diff --git a/tools/perf/arch/riscv/util/Build b/tools/perf/arch/riscv/util/Build
index 7d3050134ae0..603dbb5ae4dc 100644
--- a/tools/perf/arch/riscv/util/Build
+++ b/tools/perf/arch/riscv/util/Build
@@ -1,4 +1,5 @@
 perf-y += perf_regs.o
+perf-y += header.o
 
 perf-$(CONFIG_DWARF) += dwarf-regs.o
 perf-$(CONFIG_LIBDW_DWARF_UNWIND) += unwind-libdw.o
diff --git a/tools/perf/arch/riscv/util/header.c b/tools/perf/arch/riscv/util/header.c
new file mode 100644
index 000000000000..98d40b87c9f3
--- /dev/null
+++ b/tools/perf/arch/riscv/util/header.c
@@ -0,0 +1,66 @@
+#include <stdio.h>
+#include <stdlib.h>
+#include <api/fs/fs.h>
+#include <errno.h>
+#include "../../util/debug.h"
+#include "../../util/header.h"
+
+#define STR_LEN 1024
+#define ID_SIZE 64
+
+static int _get_cpuid(char *buf, size_t sz)
+{
+	const char *sysfs = sysfs__mountpoint();
+	u64 id = 0;
+	char path[PATH_MAX];
+	FILE *file;
+
+	if (!sysfs || sz < ID_SIZE)
+		return -EINVAL;
+
+	scnprintf(path, PATH_MAX, "%s/devices/platform/riscv-pmu/id",
+			sysfs);
+
+	file = fopen(path, "r");
+	if (!file) {
+		pr_debug("fopen failed for file %s\n", path);
+		return -EINVAL;
+	}
+	if (!fgets(buf, ID_SIZE, file)) {
+		fclose(file);
+		return -EINVAL;
+	}
+
+	fclose(file);
+
+	/*Check if value is numeric and remove special characters*/
+	id = strtoul(buf, NULL, 16);
+	if (!id)
+		return -EINVAL;
+	scnprintf(buf, ID_SIZE, "0x%lx", id);
+
+	return 0;
+}
+
+char *get_cpuid_str(struct perf_pmu *pmu __maybe_unused)
+{
+	char *buf = NULL;
+	int res;
+
+	if (!pmu)
+		return NULL;
+
+	buf = malloc(ID_SIZE);
+	if (!buf)
+		return NULL;
+
+	/* read id */
+	res = _get_cpuid(buf, ID_SIZE);
+	if (res) {
+		pr_err("failed to get cpuid string for PMU %s\n", pmu->name);
+		free(buf);
+		buf = NULL;
+	}
+
+	return buf;
+}
-- 
2.35.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH v3 2/4] RISC-V: Support CPUID for risc-v in perf

[Nikita Shubin]

From: João Mário Domingos <joao.mario@tecnico.ulisboa.pt>

This patch creates the header.c file for the risc-v architecture and introduces support for
PMU identification through sysfs.
It is now possible to configure pmu-events in risc-v.

Depends on patch [1], that introduces the id sysfs file.

Signed-off-by: João Mário Domingos <joao.mario@tecnico.ulisboa.pt>
[Nikita: replaced soc:pmu to riscv-pmu/id]
Signed-off-by: Nikita Shubin <n.shubin@yadro.com>
Tested-by: Nikita Shubin <n.shubin@yadro.com>
---
v2->v3:
- Change 'soc/soc:pmu/id' to 'riscv-pmu/id'
---
 drivers/perf/riscv_pmu.c            | 18 ++++++++
 tools/perf/arch/riscv/util/Build    |  1 +
 tools/perf/arch/riscv/util/header.c | 66 +++++++++++++++++++++++++++++
 3 files changed, 85 insertions(+)
 create mode 100644 tools/perf/arch/riscv/util/header.c

diff --git a/drivers/perf/riscv_pmu.c b/drivers/perf/riscv_pmu.c
index b2b8d2074ed0..d1aa4e0e527f 100644
--- a/drivers/perf/riscv_pmu.c
+++ b/drivers/perf/riscv_pmu.c
@@ -17,6 +17,23 @@
 
 #include <asm/sbi.h>
 
+PMU_FORMAT_ATTR(event, "config:0-63");
+
+static struct attribute *riscv_arch_formats_attr[] = {
+	&format_attr_event.attr,
+	NULL,
+};
+
+static struct attribute_group riscv_pmu_format_group = {
+	.name = "format",
+	.attrs = riscv_arch_formats_attr,
+};
+
+static const struct attribute_group *riscv_pmu_attr_groups[] = {
+	&riscv_pmu_format_group,
+	NULL,
+};
+
 static unsigned long csr_read_num(int csr_num)
 {
 #define switchcase_csr_read(__csr_num, __val)		{\
@@ -307,6 +324,7 @@ struct riscv_pmu *riscv_pmu_alloc(void)
 			cpuc->events[i] = NULL;
 	}
 	pmu->pmu = (struct pmu) {
+		.attr_groups	= riscv_pmu_attr_groups,
 		.event_init	= riscv_pmu_event_init,
 		.add		= riscv_pmu_add,
 		.del		= riscv_pmu_del,
diff --git a/tools/perf/arch/riscv/util/Build b/tools/perf/arch/riscv/util/Build
index 7d3050134ae0..603dbb5ae4dc 100644
--- a/tools/perf/arch/riscv/util/Build
+++ b/tools/perf/arch/riscv/util/Build
@@ -1,4 +1,5 @@
 perf-y += perf_regs.o
+perf-y += header.o
 
 perf-$(CONFIG_DWARF) += dwarf-regs.o
 perf-$(CONFIG_LIBDW_DWARF_UNWIND) += unwind-libdw.o
diff --git a/tools/perf/arch/riscv/util/header.c b/tools/perf/arch/riscv/util/header.c
new file mode 100644
index 000000000000..98d40b87c9f3
--- /dev/null
+++ b/tools/perf/arch/riscv/util/header.c
@@ -0,0 +1,66 @@
+#include <stdio.h>
+#include <stdlib.h>
+#include <api/fs/fs.h>
+#include <errno.h>
+#include "../../util/debug.h"
+#include "../../util/header.h"
+
+#define STR_LEN 1024
+#define ID_SIZE 64
+
+static int _get_cpuid(char *buf, size_t sz)
+{
+	const char *sysfs = sysfs__mountpoint();
+	u64 id = 0;
+	char path[PATH_MAX];
+	FILE *file;
+
+	if (!sysfs || sz < ID_SIZE)
+		return -EINVAL;
+
+	scnprintf(path, PATH_MAX, "%s/devices/platform/riscv-pmu/id",
+			sysfs);
+
+	file = fopen(path, "r");
+	if (!file) {
+		pr_debug("fopen failed for file %s\n", path);
+		return -EINVAL;
+	}
+	if (!fgets(buf, ID_SIZE, file)) {
+		fclose(file);
+		return -EINVAL;
+	}
+
+	fclose(file);
+
+	/*Check if value is numeric and remove special characters*/
+	id = strtoul(buf, NULL, 16);
+	if (!id)
+		return -EINVAL;
+	scnprintf(buf, ID_SIZE, "0x%lx", id);
+
+	return 0;
+}
+
+char *get_cpuid_str(struct perf_pmu *pmu __maybe_unused)
+{
+	char *buf = NULL;
+	int res;
+
+	if (!pmu)
+		return NULL;
+
+	buf = malloc(ID_SIZE);
+	if (!buf)
+		return NULL;
+
+	/* read id */
+	res = _get_cpuid(buf, ID_SIZE);
+	if (res) {
+		pr_err("failed to get cpuid string for PMU %s\n", pmu->name);
+		free(buf);
+		buf = NULL;
+	}
+
+	return buf;
+}
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 2/4] RISC-V: Support CPUID for risc-v in perf

[Nikita Shubin]

From: João Mário Domingos <joao.mario@tecnico.ulisboa.pt>

This patch creates the header.c file for the risc-v architecture and introduces support for
PMU identification through sysfs.
It is now possible to configure pmu-events in risc-v.

Depends on patch [1], that introduces the id sysfs file.

Signed-off-by: João Mário Domingos <joao.mario@tecnico.ulisboa.pt>
[Nikita: replaced soc:pmu to riscv-pmu/id]
Signed-off-by: Nikita Shubin <n.shubin@yadro.com>
Tested-by: Nikita Shubin <n.shubin@yadro.com>
---
v2->v3:
- Change 'soc/soc:pmu/id' to 'riscv-pmu/id'
---
 drivers/perf/riscv_pmu.c            | 18 ++++++++
 tools/perf/arch/riscv/util/Build    |  1 +
 tools/perf/arch/riscv/util/header.c | 66 +++++++++++++++++++++++++++++
 3 files changed, 85 insertions(+)
 create mode 100644 tools/perf/arch/riscv/util/header.c

diff --git a/drivers/perf/riscv_pmu.c b/drivers/perf/riscv_pmu.c
index b2b8d2074ed0..d1aa4e0e527f 100644
--- a/drivers/perf/riscv_pmu.c
+++ b/drivers/perf/riscv_pmu.c
@@ -17,6 +17,23 @@
 
 #include <asm/sbi.h>
 
+PMU_FORMAT_ATTR(event, "config:0-63");
+
+static struct attribute *riscv_arch_formats_attr[] = {
+	&format_attr_event.attr,
+	NULL,
+};
+
+static struct attribute_group riscv_pmu_format_group = {
+	.name = "format",
+	.attrs = riscv_arch_formats_attr,
+};
+
+static const struct attribute_group *riscv_pmu_attr_groups[] = {
+	&riscv_pmu_format_group,
+	NULL,
+};
+
 static unsigned long csr_read_num(int csr_num)
 {
 #define switchcase_csr_read(__csr_num, __val)		{\
@@ -307,6 +324,7 @@ struct riscv_pmu *riscv_pmu_alloc(void)
 			cpuc->events[i] = NULL;
 	}
 	pmu->pmu = (struct pmu) {
+		.attr_groups	= riscv_pmu_attr_groups,
 		.event_init	= riscv_pmu_event_init,
 		.add		= riscv_pmu_add,
 		.del		= riscv_pmu_del,
diff --git a/tools/perf/arch/riscv/util/Build b/tools/perf/arch/riscv/util/Build
index 7d3050134ae0..603dbb5ae4dc 100644
--- a/tools/perf/arch/riscv/util/Build
+++ b/tools/perf/arch/riscv/util/Build
@@ -1,4 +1,5 @@
 perf-y += perf_regs.o
+perf-y += header.o
 
 perf-$(CONFIG_DWARF) += dwarf-regs.o
 perf-$(CONFIG_LIBDW_DWARF_UNWIND) += unwind-libdw.o
diff --git a/tools/perf/arch/riscv/util/header.c b/tools/perf/arch/riscv/util/header.c
new file mode 100644
index 000000000000..98d40b87c9f3
--- /dev/null
+++ b/tools/perf/arch/riscv/util/header.c
@@ -0,0 +1,66 @@
+#include <stdio.h>
+#include <stdlib.h>
+#include <api/fs/fs.h>
+#include <errno.h>
+#include "../../util/debug.h"
+#include "../../util/header.h"
+
+#define STR_LEN 1024
+#define ID_SIZE 64
+
+static int _get_cpuid(char *buf, size_t sz)
+{
+	const char *sysfs = sysfs__mountpoint();
+	u64 id = 0;
+	char path[PATH_MAX];
+	FILE *file;
+
+	if (!sysfs || sz < ID_SIZE)
+		return -EINVAL;
+
+	scnprintf(path, PATH_MAX, "%s/devices/platform/riscv-pmu/id",
+			sysfs);
+
+	file = fopen(path, "r");
+	if (!file) {
+		pr_debug("fopen failed for file %s\n", path);
+		return -EINVAL;
+	}
+	if (!fgets(buf, ID_SIZE, file)) {
+		fclose(file);
+		return -EINVAL;
+	}
+
+	fclose(file);
+
+	/*Check if value is numeric and remove special characters*/
+	id = strtoul(buf, NULL, 16);
+	if (!id)
+		return -EINVAL;
+	scnprintf(buf, ID_SIZE, "0x%lx", id);
+
+	return 0;
+}
+
+char *get_cpuid_str(struct perf_pmu *pmu __maybe_unused)
+{
+	char *buf = NULL;
+	int res;
+
+	if (!pmu)
+		return NULL;
+
+	buf = malloc(ID_SIZE);
+	if (!buf)
+		return NULL;
+
+	/* read id */
+	res = _get_cpuid(buf, ID_SIZE);
+	if (res) {
+		pr_err("failed to get cpuid string for PMU %s\n", pmu->name);
+		free(buf);
+		buf = NULL;
+	}
+
+	return buf;
+}
-- 
2.35.1

[PATCH v3 3/4] RISC-V: Added generic pmu-events mapfile

[Nikita Shubin]

From: João Mário Domingos <joao.mario@tecnico.ulisboa.pt>

The pmu-events now supports custom events for RISC-V, plus the cycle,
time and instret events were defined.

Signed-off-by: João Mário Domingos <joao.mario@tecnico.ulisboa.pt>
Tested-by: Nikita Shubin <n.shubin@yadro.com>
---
 tools/perf/pmu-events/arch/riscv/mapfile.csv  | 14 +++++++++++++
 .../pmu-events/arch/riscv/riscv-generic.json  | 20 +++++++++++++++++++
 2 files changed, 34 insertions(+)
 create mode 100644 tools/perf/pmu-events/arch/riscv/mapfile.csv
 create mode 100644 tools/perf/pmu-events/arch/riscv/riscv-generic.json

diff --git a/tools/perf/pmu-events/arch/riscv/mapfile.csv b/tools/perf/pmu-events/arch/riscv/mapfile.csv
new file mode 100644
index 000000000000..4f2aa199d9cb
--- /dev/null
+++ b/tools/perf/pmu-events/arch/riscv/mapfile.csv
@@ -0,0 +1,14 @@
+# Format:
+#	MIDR,Version,JSON/file/pathname,Type
+#
+# where
+#	MIDR	Processor version
+#		Variant[23:20] and Revision [3:0] should be zero.
+#	Version could be used to track version of JSON file
+#		but currently unused.
+#	JSON/file/pathname is the path to JSON file, relative
+#		to tools/perf/pmu-events/arch/riscv/.
+#	Type is core, uncore etc
+#
+#
+#Family-model,Version,Filename,EventType
diff --git a/tools/perf/pmu-events/arch/riscv/riscv-generic.json b/tools/perf/pmu-events/arch/riscv/riscv-generic.json
new file mode 100644
index 000000000000..013e50efad99
--- /dev/null
+++ b/tools/perf/pmu-events/arch/riscv/riscv-generic.json
@@ -0,0 +1,20 @@
+[
+  {
+    "PublicDescription": "CPU Cycles",
+    "EventCode": "0x00",
+    "EventName": "riscv_cycles",
+    "BriefDescription": "CPU cycles RISC-V generic counter"
+  },
+  {
+    "PublicDescription": "CPU Time",
+      "EventCode": "0x01",
+      "EventName": "riscv_time",
+      "BriefDescription": "CPU time RISC-V generic counter"
+  },
+  {
+    "PublicDescription": "CPU Instructions",
+      "EventCode": "0x02",
+      "EventName": "riscv_instret",
+      "BriefDescription": "CPU retired instructions RISC-V generic counter"
+  }
+]
\ No newline at end of file
-- 
2.35.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH v3 3/4] RISC-V: Added generic pmu-events mapfile

[Nikita Shubin]

From: João Mário Domingos <joao.mario@tecnico.ulisboa.pt>

The pmu-events now supports custom events for RISC-V, plus the cycle,
time and instret events were defined.

Signed-off-by: João Mário Domingos <joao.mario@tecnico.ulisboa.pt>
Tested-by: Nikita Shubin <n.shubin@yadro.com>
---
 tools/perf/pmu-events/arch/riscv/mapfile.csv  | 14 +++++++++++++
 .../pmu-events/arch/riscv/riscv-generic.json  | 20 +++++++++++++++++++
 2 files changed, 34 insertions(+)
 create mode 100644 tools/perf/pmu-events/arch/riscv/mapfile.csv
 create mode 100644 tools/perf/pmu-events/arch/riscv/riscv-generic.json

diff --git a/tools/perf/pmu-events/arch/riscv/mapfile.csv b/tools/perf/pmu-events/arch/riscv/mapfile.csv
new file mode 100644
index 000000000000..4f2aa199d9cb
--- /dev/null
+++ b/tools/perf/pmu-events/arch/riscv/mapfile.csv
@@ -0,0 +1,14 @@
+# Format:
+#	MIDR,Version,JSON/file/pathname,Type
+#
+# where
+#	MIDR	Processor version
+#		Variant[23:20] and Revision [3:0] should be zero.
+#	Version could be used to track version of JSON file
+#		but currently unused.
+#	JSON/file/pathname is the path to JSON file, relative
+#		to tools/perf/pmu-events/arch/riscv/.
+#	Type is core, uncore etc
+#
+#
+#Family-model,Version,Filename,EventType
diff --git a/tools/perf/pmu-events/arch/riscv/riscv-generic.json b/tools/perf/pmu-events/arch/riscv/riscv-generic.json
new file mode 100644
index 000000000000..013e50efad99
--- /dev/null
+++ b/tools/perf/pmu-events/arch/riscv/riscv-generic.json
@@ -0,0 +1,20 @@
+[
+  {
+    "PublicDescription": "CPU Cycles",
+    "EventCode": "0x00",
+    "EventName": "riscv_cycles",
+    "BriefDescription": "CPU cycles RISC-V generic counter"
+  },
+  {
+    "PublicDescription": "CPU Time",
+      "EventCode": "0x01",
+      "EventName": "riscv_time",
+      "BriefDescription": "CPU time RISC-V generic counter"
+  },
+  {
+    "PublicDescription": "CPU Instructions",
+      "EventCode": "0x02",
+      "EventName": "riscv_instret",
+      "BriefDescription": "CPU retired instructions RISC-V generic counter"
+  }
+]
\ No newline at end of file
-- 
2.35.1

[PATCH v3 4/4] RISC-V: Added HiFive Unmatched PMU events

[Nikita Shubin]

From: João Mário Domingos <joao.mario@tecnico.ulisboa.pt>

This patch contains all the available events for the HiFive Unmatched performance monitoring unit.

Depends on patch [3], for the base mapfile.csv file.

Signed-off-by: João Mário Domingos <joao.mario@tecnico.ulisboa.pt>
Tested-by: Nikita Shubin <n.shubin@yadro.com>
---
 tools/perf/pmu-events/arch/riscv/mapfile.csv  |  1 +
 .../arch/riscv/sifive/u74/instructions.json   | 92 +++++++++++++++++++
 .../arch/riscv/sifive/u74/memory.json         | 32 +++++++
 .../arch/riscv/sifive/u74/microarch.json      | 57 ++++++++++++
 4 files changed, 182 insertions(+)
 create mode 100644 tools/perf/pmu-events/arch/riscv/sifive/u74/instructions.json
 create mode 100644 tools/perf/pmu-events/arch/riscv/sifive/u74/memory.json
 create mode 100644 tools/perf/pmu-events/arch/riscv/sifive/u74/microarch.json

diff --git a/tools/perf/pmu-events/arch/riscv/mapfile.csv b/tools/perf/pmu-events/arch/riscv/mapfile.csv
index 4f2aa199d9cb..bda3fb9382f1 100644
--- a/tools/perf/pmu-events/arch/riscv/mapfile.csv
+++ b/tools/perf/pmu-events/arch/riscv/mapfile.csv
@@ -12,3 +12,4 @@
 #
 #
 #Family-model,Version,Filename,EventType
+0x48980072018,v1,sifive/u74,core
diff --git a/tools/perf/pmu-events/arch/riscv/sifive/u74/instructions.json b/tools/perf/pmu-events/arch/riscv/sifive/u74/instructions.json
new file mode 100644
index 000000000000..5eab718c9256
--- /dev/null
+++ b/tools/perf/pmu-events/arch/riscv/sifive/u74/instructions.json
@@ -0,0 +1,92 @@
+[
+  {
+    "EventName": "EXCEPTION_TAKEN",
+    "EventCode": "0x0000100",
+    "BriefDescription": "Exception taken"
+  },
+  {
+    "EventName": "INTEGER_LOAD_RETIRED",
+    "EventCode": "0x0000200",
+    "BriefDescription": "Integer load instruction retired"
+  },
+  {
+    "EventName": "INTEGER_STORE_RETIRED",
+    "EventCode": "0x0000400",
+    "BriefDescription": "Integer store instruction retired"
+  },
+  {
+    "EventName": "ATOMIC_MEMORY_RETIRED",
+    "EventCode": "0x0000800",
+    "BriefDescription": "Atomic memory operation retired"
+  },
+  {
+    "EventName": "SYSTEM_INSTRUCTION_RETIRED",
+    "EventCode": "0x0001000",
+    "BriefDescription": "System instruction retired"
+  },
+  {
+    "EventName": "INTEGER_ARITHMETIC_RETIRED",
+    "EventCode": "0x0002000",
+    "BriefDescription": "Integer arithmetic instruction retired"
+  },
+  {
+    "EventName": "CONDITIONAL_BRANCH_RETIRED",
+    "EventCode": "0x0004000",
+    "BriefDescription": "Conditional branch retired"
+  },
+  {
+    "EventName": "JAL_INSTRUCTION_RETIRED",
+    "EventCode": "0x0008000",
+    "BriefDescription": "JAL instruction retired"
+  },
+  {
+    "EventName": "JALR_INSTRUCTION_RETIRED",
+    "EventCode": "0x0010000",
+    "BriefDescription": "JALR instruction retired"
+  },
+  {
+    "EventName": "INTEGER_MULTIPLICATION_RETIRED",
+    "EventCode": "0x0020000",
+    "BriefDescription": "Integer multiplication instruction retired"
+  },
+  {
+    "EventName": "INTEGER_DIVISION_RETIRED",
+    "EventCode": "0x0040000",
+    "BriefDescription": "Integer division instruction retired"
+  },
+  {
+    "EventName": "FP_LOAD_RETIRED",
+    "EventCode": "0x0080000",
+    "BriefDescription": "Floating-point load instruction retired"
+  },
+  {
+    "EventName": "FP_STORE_RETIRED",
+    "EventCode": "0x0100000",
+    "BriefDescription": "Floating-point store instruction retired"
+  },
+  {
+    "EventName": "FP_ADDITION_RETIRED",
+    "EventCode": "0x0200000",
+    "BriefDescription": "Floating-point addition retired"
+  },
+  {
+    "EventName": "FP_MULTIPLICATION_RETIRED",
+    "EventCode": "0x0400000",
+    "BriefDescription": "Floating-point multiplication retired"
+  },
+  {
+    "EventName": "FP_FUSEDMADD_RETIRED",
+    "EventCode": "0x0800000",
+    "BriefDescription": "Floating-point fused multiply-add retired"
+  },
+  {
+    "EventName": "FP_DIV_SQRT_RETIRED",
+    "EventCode": "0x1000000",
+    "BriefDescription": "Floating-point division or square-root retired"
+  },
+  {
+    "EventName": "OTHER_FP_RETIRED",
+    "EventCode": "0x2000000",
+    "BriefDescription": "Other floating-point instruction retired"
+  }
+]
\ No newline at end of file
diff --git a/tools/perf/pmu-events/arch/riscv/sifive/u74/memory.json b/tools/perf/pmu-events/arch/riscv/sifive/u74/memory.json
new file mode 100644
index 000000000000..be1a46312ac3
--- /dev/null
+++ b/tools/perf/pmu-events/arch/riscv/sifive/u74/memory.json
@@ -0,0 +1,32 @@
+[
+  {
+    "EventName": "ICACHE_RETIRED",
+    "EventCode": "0x0000102",
+    "BriefDescription": "Instruction cache miss"
+  },
+  {
+    "EventName": "DCACHE_MISS_MMIO_ACCESSES",
+    "EventCode": "0x0000202",
+    "BriefDescription": "Data cache miss or memory-mapped I/O access"
+  },
+  {
+    "EventName": "DCACHE_WRITEBACK",
+    "EventCode": "0x0000402",
+    "BriefDescription": "Data cache write-back"
+  },
+  {
+    "EventName": "INST_TLB_MISS",
+    "EventCode": "0x0000802",
+    "BriefDescription": "Instruction TLB miss"
+  },
+  {
+    "EventName": "DATA_TLB_MISS",
+    "EventCode": "0x0001002",
+    "BriefDescription": "Data TLB miss"
+  },
+  {
+    "EventName": "UTLB_MISS",
+    "EventCode": "0x0002002",
+    "BriefDescription": "UTLB miss"
+  }
+]
\ No newline at end of file
diff --git a/tools/perf/pmu-events/arch/riscv/sifive/u74/microarch.json b/tools/perf/pmu-events/arch/riscv/sifive/u74/microarch.json
new file mode 100644
index 000000000000..50ffa55418cb
--- /dev/null
+++ b/tools/perf/pmu-events/arch/riscv/sifive/u74/microarch.json
@@ -0,0 +1,57 @@
+[
+  {
+    "EventName": "ADDRESSGEN_INTERLOCK",
+    "EventCode": "0x0000101",
+    "BriefDescription": "Address-generation interlock"
+  },
+  {
+    "EventName": "LONGLAT_INTERLOCK",
+    "EventCode": "0x0000201",
+    "BriefDescription": "Long-latency interlock"
+  },
+  {
+    "EventName": "CSR_READ_INTERLOCK",
+    "EventCode": "0x0000401",
+    "BriefDescription": "CSR read interlock"
+  },
+  {
+    "EventName": "ICACHE_ITIM_BUSY",
+    "EventCode": "0x0000801",
+    "BriefDescription": "Instruction cache/ITIM busy"
+  },
+  {
+    "EventName": "DCACHE_DTIM_BUSY",
+    "EventCode": "0x0001001",
+    "BriefDescription": "Data cache/DTIM busy"
+  },
+  {
+    "EventName": "BRANCH_DIRECTION_MISPREDICTION",
+    "EventCode": "0x0002001",
+    "BriefDescription": "Branch direction misprediction"
+  },
+  {
+    "EventName": "BRANCH_TARGET_MISPREDICTION",
+    "EventCode": "0x0004001",
+    "BriefDescription": "Branch/jump target misprediction"
+  },
+  {
+    "EventName": "PIPE_FLUSH_CSR_WRITE",
+    "EventCode": "0x0008001",
+    "BriefDescription": "Pipeline flush from CSR write"
+  },
+  {
+    "EventName": "PIPE_FLUSH_OTHER_EVENT",
+    "EventCode": "0x0010001",
+    "BriefDescription": "Pipeline flush from other event"
+  },
+  {
+    "EventName": "INTEGER_MULTIPLICATION_INTERLOCK",
+    "EventCode": "0x0020001",
+    "BriefDescription": "Integer multiplication interlock"
+  },
+  {
+    "EventName": "FP_INTERLOCK",
+    "EventCode": "0x0040001",
+    "BriefDescription": "Floating-point interlock"
+  }
+]
\ No newline at end of file
-- 
2.35.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH v3 4/4] RISC-V: Added HiFive Unmatched PMU events

[Nikita Shubin]

From: João Mário Domingos <joao.mario@tecnico.ulisboa.pt>

This patch contains all the available events for the HiFive Unmatched performance monitoring unit.

Depends on patch [3], for the base mapfile.csv file.

Signed-off-by: João Mário Domingos <joao.mario@tecnico.ulisboa.pt>
Tested-by: Nikita Shubin <n.shubin@yadro.com>
---
 tools/perf/pmu-events/arch/riscv/mapfile.csv  |  1 +
 .../arch/riscv/sifive/u74/instructions.json   | 92 +++++++++++++++++++
 .../arch/riscv/sifive/u74/memory.json         | 32 +++++++
 .../arch/riscv/sifive/u74/microarch.json      | 57 ++++++++++++
 4 files changed, 182 insertions(+)
 create mode 100644 tools/perf/pmu-events/arch/riscv/sifive/u74/instructions.json
 create mode 100644 tools/perf/pmu-events/arch/riscv/sifive/u74/memory.json
 create mode 100644 tools/perf/pmu-events/arch/riscv/sifive/u74/microarch.json

diff --git a/tools/perf/pmu-events/arch/riscv/mapfile.csv b/tools/perf/pmu-events/arch/riscv/mapfile.csv
index 4f2aa199d9cb..bda3fb9382f1 100644
--- a/tools/perf/pmu-events/arch/riscv/mapfile.csv
+++ b/tools/perf/pmu-events/arch/riscv/mapfile.csv
@@ -12,3 +12,4 @@
 #
 #
 #Family-model,Version,Filename,EventType
+0x48980072018,v1,sifive/u74,core
diff --git a/tools/perf/pmu-events/arch/riscv/sifive/u74/instructions.json b/tools/perf/pmu-events/arch/riscv/sifive/u74/instructions.json
new file mode 100644
index 000000000000..5eab718c9256
--- /dev/null
+++ b/tools/perf/pmu-events/arch/riscv/sifive/u74/instructions.json
@@ -0,0 +1,92 @@
+[
+  {
+    "EventName": "EXCEPTION_TAKEN",
+    "EventCode": "0x0000100",
+    "BriefDescription": "Exception taken"
+  },
+  {
+    "EventName": "INTEGER_LOAD_RETIRED",
+    "EventCode": "0x0000200",
+    "BriefDescription": "Integer load instruction retired"
+  },
+  {
+    "EventName": "INTEGER_STORE_RETIRED",
+    "EventCode": "0x0000400",
+    "BriefDescription": "Integer store instruction retired"
+  },
+  {
+    "EventName": "ATOMIC_MEMORY_RETIRED",
+    "EventCode": "0x0000800",
+    "BriefDescription": "Atomic memory operation retired"
+  },
+  {
+    "EventName": "SYSTEM_INSTRUCTION_RETIRED",
+    "EventCode": "0x0001000",
+    "BriefDescription": "System instruction retired"
+  },
+  {
+    "EventName": "INTEGER_ARITHMETIC_RETIRED",
+    "EventCode": "0x0002000",
+    "BriefDescription": "Integer arithmetic instruction retired"
+  },
+  {
+    "EventName": "CONDITIONAL_BRANCH_RETIRED",
+    "EventCode": "0x0004000",
+    "BriefDescription": "Conditional branch retired"
+  },
+  {
+    "EventName": "JAL_INSTRUCTION_RETIRED",
+    "EventCode": "0x0008000",
+    "BriefDescription": "JAL instruction retired"
+  },
+  {
+    "EventName": "JALR_INSTRUCTION_RETIRED",
+    "EventCode": "0x0010000",
+    "BriefDescription": "JALR instruction retired"
+  },
+  {
+    "EventName": "INTEGER_MULTIPLICATION_RETIRED",
+    "EventCode": "0x0020000",
+    "BriefDescription": "Integer multiplication instruction retired"
+  },
+  {
+    "EventName": "INTEGER_DIVISION_RETIRED",
+    "EventCode": "0x0040000",
+    "BriefDescription": "Integer division instruction retired"
+  },
+  {
+    "EventName": "FP_LOAD_RETIRED",
+    "EventCode": "0x0080000",
+    "BriefDescription": "Floating-point load instruction retired"
+  },
+  {
+    "EventName": "FP_STORE_RETIRED",
+    "EventCode": "0x0100000",
+    "BriefDescription": "Floating-point store instruction retired"
+  },
+  {
+    "EventName": "FP_ADDITION_RETIRED",
+    "EventCode": "0x0200000",
+    "BriefDescription": "Floating-point addition retired"
+  },
+  {
+    "EventName": "FP_MULTIPLICATION_RETIRED",
+    "EventCode": "0x0400000",
+    "BriefDescription": "Floating-point multiplication retired"
+  },
+  {
+    "EventName": "FP_FUSEDMADD_RETIRED",
+    "EventCode": "0x0800000",
+    "BriefDescription": "Floating-point fused multiply-add retired"
+  },
+  {
+    "EventName": "FP_DIV_SQRT_RETIRED",
+    "EventCode": "0x1000000",
+    "BriefDescription": "Floating-point division or square-root retired"
+  },
+  {
+    "EventName": "OTHER_FP_RETIRED",
+    "EventCode": "0x2000000",
+    "BriefDescription": "Other floating-point instruction retired"
+  }
+]
\ No newline at end of file
diff --git a/tools/perf/pmu-events/arch/riscv/sifive/u74/memory.json b/tools/perf/pmu-events/arch/riscv/sifive/u74/memory.json
new file mode 100644
index 000000000000..be1a46312ac3
--- /dev/null
+++ b/tools/perf/pmu-events/arch/riscv/sifive/u74/memory.json
@@ -0,0 +1,32 @@
+[
+  {
+    "EventName": "ICACHE_RETIRED",
+    "EventCode": "0x0000102",
+    "BriefDescription": "Instruction cache miss"
+  },
+  {
+    "EventName": "DCACHE_MISS_MMIO_ACCESSES",
+    "EventCode": "0x0000202",
+    "BriefDescription": "Data cache miss or memory-mapped I/O access"
+  },
+  {
+    "EventName": "DCACHE_WRITEBACK",
+    "EventCode": "0x0000402",
+    "BriefDescription": "Data cache write-back"
+  },
+  {
+    "EventName": "INST_TLB_MISS",
+    "EventCode": "0x0000802",
+    "BriefDescription": "Instruction TLB miss"
+  },
+  {
+    "EventName": "DATA_TLB_MISS",
+    "EventCode": "0x0001002",
+    "BriefDescription": "Data TLB miss"
+  },
+  {
+    "EventName": "UTLB_MISS",
+    "EventCode": "0x0002002",
+    "BriefDescription": "UTLB miss"
+  }
+]
\ No newline at end of file
diff --git a/tools/perf/pmu-events/arch/riscv/sifive/u74/microarch.json b/tools/perf/pmu-events/arch/riscv/sifive/u74/microarch.json
new file mode 100644
index 000000000000..50ffa55418cb
--- /dev/null
+++ b/tools/perf/pmu-events/arch/riscv/sifive/u74/microarch.json
@@ -0,0 +1,57 @@
+[
+  {
+    "EventName": "ADDRESSGEN_INTERLOCK",
+    "EventCode": "0x0000101",
+    "BriefDescription": "Address-generation interlock"
+  },
+  {
+    "EventName": "LONGLAT_INTERLOCK",
+    "EventCode": "0x0000201",
+    "BriefDescription": "Long-latency interlock"
+  },
+  {
+    "EventName": "CSR_READ_INTERLOCK",
+    "EventCode": "0x0000401",
+    "BriefDescription": "CSR read interlock"
+  },
+  {
+    "EventName": "ICACHE_ITIM_BUSY",
+    "EventCode": "0x0000801",
+    "BriefDescription": "Instruction cache/ITIM busy"
+  },
+  {
+    "EventName": "DCACHE_DTIM_BUSY",
+    "EventCode": "0x0001001",
+    "BriefDescription": "Data cache/DTIM busy"
+  },
+  {
+    "EventName": "BRANCH_DIRECTION_MISPREDICTION",
+    "EventCode": "0x0002001",
+    "BriefDescription": "Branch direction misprediction"
+  },
+  {
+    "EventName": "BRANCH_TARGET_MISPREDICTION",
+    "EventCode": "0x0004001",
+    "BriefDescription": "Branch/jump target misprediction"
+  },
+  {
+    "EventName": "PIPE_FLUSH_CSR_WRITE",
+    "EventCode": "0x0008001",
+    "BriefDescription": "Pipeline flush from CSR write"
+  },
+  {
+    "EventName": "PIPE_FLUSH_OTHER_EVENT",
+    "EventCode": "0x0010001",
+    "BriefDescription": "Pipeline flush from other event"
+  },
+  {
+    "EventName": "INTEGER_MULTIPLICATION_INTERLOCK",
+    "EventCode": "0x0020001",
+    "BriefDescription": "Integer multiplication interlock"
+  },
+  {
+    "EventName": "FP_INTERLOCK",
+    "EventCode": "0x0040001",
+    "BriefDescription": "Floating-point interlock"
+  }
+]
\ No newline at end of file
-- 
2.35.1

Re: [PATCH v3 1/4] RISC-V: Create unique identification for SoC PMU

[Atish Patra]

On Tue, Jun 7, 2022 at 6:17 AM Nikita Shubin <nikita.shubin@maquefel.me> wrote:
>
> From: João Mário Domingos <joao.mario@tecnico.ulisboa.pt>
>
> The SBI PMU platform driver did not provide any identification for
> perf events matching. This patch introduces a new sysfs file inside the
> platform device (soc:pmu/id) for pmu identification.
>
> The identification is a 64-bit value generated as:
> [63-32]: mvendorid;
> [31]: marchid[MSB];
> [30-16]: marchid[15-0];
> [15-0]: mimpid[15MSBs];
>

This is not entirely correct as marchid or mimpid can be MXLEN. The
encoding scheme is left upto the
vendor. We can not assume anything about it.

The purpose of the PMU ID is to distinguish between different
vendors/generations. The perf tool expects
a json string.
I think you can just keep all these 3 registers into the JSON string
as it is to avoid any pitfalls with vendor weirdness.

> The CSRs are detailed in the RISC-V privileged spec [1].
> The marchid is split in MSB + 15LSBs, due to the MSB being used for
> open-source architecture identification.
>
> [1] https://github.com/riscv/riscv-isa-manual
>
> Signed-off-by: João Mário Domingos <joao.mario@tecnico.ulisboa.pt>
> Tested-by: Nikita Shubin <n.shubin@yadro.com>
> ---
>  arch/riscv/kernel/sbi.c      |  3 +++
>  drivers/perf/riscv_pmu_sbi.c | 47 ++++++++++++++++++++++++++++++++++++
>  2 files changed, 50 insertions(+)
>
> diff --git a/arch/riscv/kernel/sbi.c b/arch/riscv/kernel/sbi.c
> index 775d3322b422..50dd9b6ecc9e 100644
> --- a/arch/riscv/kernel/sbi.c
> +++ b/arch/riscv/kernel/sbi.c
> @@ -627,16 +627,19 @@ long sbi_get_mvendorid(void)
>  {
>         return __sbi_base_ecall(SBI_EXT_BASE_GET_MVENDORID);
>  }
> +EXPORT_SYMBOL(sbi_get_mvendorid);
>
>  long sbi_get_marchid(void)
>  {
>         return __sbi_base_ecall(SBI_EXT_BASE_GET_MARCHID);
>  }
> +EXPORT_SYMBOL(sbi_get_marchid);
>
>  long sbi_get_mimpid(void)
>  {
>         return __sbi_base_ecall(SBI_EXT_BASE_GET_MIMPID);
>  }
> +EXPORT_SYMBOL(sbi_get_mimpid);
>
>  static void sbi_send_cpumask_ipi(const struct cpumask *target)
>  {
> diff --git a/drivers/perf/riscv_pmu_sbi.c b/drivers/perf/riscv_pmu_sbi.c
> index a1317a483512..15ab3dc68e7a 100644
> --- a/drivers/perf/riscv_pmu_sbi.c
> +++ b/drivers/perf/riscv_pmu_sbi.c
> @@ -693,6 +693,46 @@ static int pmu_sbi_setup_irqs(struct riscv_pmu *pmu, struct platform_device *pde
>         return 0;
>  }
>
> +static uint64_t pmu_sbi_get_pmu_id(void)
> +{
> +       union sbi_pmu_id {
> +               uint64_t value;
> +               struct {
> +                       uint16_t imp:16;
> +                       uint16_t arch:16;
> +                       uint32_t vendor:32;
> +               };
> +       } pmuid;
> +
> +       pmuid.value = 0;
> +       pmuid.vendor = (uint32_t) sbi_get_mvendorid();
> +       pmuid.arch = (sbi_get_marchid() >> (63 - 15) & (1 << 15)) | (sbi_get_marchid() & 0x7FFF);
> +       pmuid.imp = (sbi_get_mimpid() >> 16);
> +
> +       return pmuid.value;
> +}
> +
> +static ssize_t pmu_sbi_id_show(struct device *dev,
> +               struct device_attribute *attr, char *buf)
> +{
> +       int len;
> +
> +       len = sprintf(buf, "0x%llx\n", pmu_sbi_get_pmu_id());
> +       if (len <= 0)
> +               dev_err(dev, "mydrv: Invalid sprintf len: %dn", len);
> +
> +       return len;
> +}
> +
> +static DEVICE_ATTR(id, S_IRUGO | S_IWUSR, pmu_sbi_id_show, 0);
> +
> +static struct attribute *pmu_sbi_attrs[] = {
> +       &dev_attr_id.attr,
> +       NULL
> +};
> +
> +ATTRIBUTE_GROUPS(pmu_sbi);
> +
>  static int pmu_sbi_device_probe(struct platform_device *pdev)
>  {
>         struct riscv_pmu *pmu = NULL;
> @@ -729,6 +769,13 @@ static int pmu_sbi_device_probe(struct platform_device *pdev)
>         pmu->ctr_clear_idx = pmu_sbi_ctr_clear_idx;
>         pmu->ctr_read = pmu_sbi_ctr_read;
>
> +       ret = sysfs_create_group(&pdev->dev.kobj, &pmu_sbi_group);
> +       if (ret) {
> +               dev_err(&pdev->dev, "sysfs creation failed\n");
> +               return ret;
> +       }
> +       pdev->dev.groups = pmu_sbi_groups;
> +
>         ret = cpuhp_state_add_instance(CPUHP_AP_PERF_RISCV_STARTING, &pmu->node);
>         if (ret)
>                 return ret;
> --
> 2.35.1
>


--
Regards,
Atish

Re: [PATCH v3 1/4] RISC-V: Create unique identification for SoC PMU

[Atish Patra]

On Tue, Jun 7, 2022 at 6:17 AM Nikita Shubin <nikita.shubin@maquefel.me> wrote:
>
> From: João Mário Domingos <joao.mario@tecnico.ulisboa.pt>
>
> The SBI PMU platform driver did not provide any identification for
> perf events matching. This patch introduces a new sysfs file inside the
> platform device (soc:pmu/id) for pmu identification.
>
> The identification is a 64-bit value generated as:
> [63-32]: mvendorid;
> [31]: marchid[MSB];
> [30-16]: marchid[15-0];
> [15-0]: mimpid[15MSBs];
>

This is not entirely correct as marchid or mimpid can be MXLEN. The
encoding scheme is left upto the
vendor. We can not assume anything about it.

The purpose of the PMU ID is to distinguish between different
vendors/generations. The perf tool expects
a json string.
I think you can just keep all these 3 registers into the JSON string
as it is to avoid any pitfalls with vendor weirdness.

> The CSRs are detailed in the RISC-V privileged spec [1].
> The marchid is split in MSB + 15LSBs, due to the MSB being used for
> open-source architecture identification.
>
> [1] https://github.com/riscv/riscv-isa-manual
>
> Signed-off-by: João Mário Domingos <joao.mario@tecnico.ulisboa.pt>
> Tested-by: Nikita Shubin <n.shubin@yadro.com>
> ---
>  arch/riscv/kernel/sbi.c      |  3 +++
>  drivers/perf/riscv_pmu_sbi.c | 47 ++++++++++++++++++++++++++++++++++++
>  2 files changed, 50 insertions(+)
>
> diff --git a/arch/riscv/kernel/sbi.c b/arch/riscv/kernel/sbi.c
> index 775d3322b422..50dd9b6ecc9e 100644
> --- a/arch/riscv/kernel/sbi.c
> +++ b/arch/riscv/kernel/sbi.c
> @@ -627,16 +627,19 @@ long sbi_get_mvendorid(void)
>  {
>         return __sbi_base_ecall(SBI_EXT_BASE_GET_MVENDORID);
>  }
> +EXPORT_SYMBOL(sbi_get_mvendorid);
>
>  long sbi_get_marchid(void)
>  {
>         return __sbi_base_ecall(SBI_EXT_BASE_GET_MARCHID);
>  }
> +EXPORT_SYMBOL(sbi_get_marchid);
>
>  long sbi_get_mimpid(void)
>  {
>         return __sbi_base_ecall(SBI_EXT_BASE_GET_MIMPID);
>  }
> +EXPORT_SYMBOL(sbi_get_mimpid);
>
>  static void sbi_send_cpumask_ipi(const struct cpumask *target)
>  {
> diff --git a/drivers/perf/riscv_pmu_sbi.c b/drivers/perf/riscv_pmu_sbi.c
> index a1317a483512..15ab3dc68e7a 100644
> --- a/drivers/perf/riscv_pmu_sbi.c
> +++ b/drivers/perf/riscv_pmu_sbi.c
> @@ -693,6 +693,46 @@ static int pmu_sbi_setup_irqs(struct riscv_pmu *pmu, struct platform_device *pde
>         return 0;
>  }
>
> +static uint64_t pmu_sbi_get_pmu_id(void)
> +{
> +       union sbi_pmu_id {
> +               uint64_t value;
> +               struct {
> +                       uint16_t imp:16;
> +                       uint16_t arch:16;
> +                       uint32_t vendor:32;
> +               };
> +       } pmuid;
> +
> +       pmuid.value = 0;
> +       pmuid.vendor = (uint32_t) sbi_get_mvendorid();
> +       pmuid.arch = (sbi_get_marchid() >> (63 - 15) & (1 << 15)) | (sbi_get_marchid() & 0x7FFF);
> +       pmuid.imp = (sbi_get_mimpid() >> 16);
> +
> +       return pmuid.value;
> +}
> +
> +static ssize_t pmu_sbi_id_show(struct device *dev,
> +               struct device_attribute *attr, char *buf)
> +{
> +       int len;
> +
> +       len = sprintf(buf, "0x%llx\n", pmu_sbi_get_pmu_id());
> +       if (len <= 0)
> +               dev_err(dev, "mydrv: Invalid sprintf len: %dn", len);
> +
> +       return len;
> +}
> +
> +static DEVICE_ATTR(id, S_IRUGO | S_IWUSR, pmu_sbi_id_show, 0);
> +
> +static struct attribute *pmu_sbi_attrs[] = {
> +       &dev_attr_id.attr,
> +       NULL
> +};
> +
> +ATTRIBUTE_GROUPS(pmu_sbi);
> +
>  static int pmu_sbi_device_probe(struct platform_device *pdev)
>  {
>         struct riscv_pmu *pmu = NULL;
> @@ -729,6 +769,13 @@ static int pmu_sbi_device_probe(struct platform_device *pdev)
>         pmu->ctr_clear_idx = pmu_sbi_ctr_clear_idx;
>         pmu->ctr_read = pmu_sbi_ctr_read;
>
> +       ret = sysfs_create_group(&pdev->dev.kobj, &pmu_sbi_group);
> +       if (ret) {
> +               dev_err(&pdev->dev, "sysfs creation failed\n");
> +               return ret;
> +       }
> +       pdev->dev.groups = pmu_sbi_groups;
> +
>         ret = cpuhp_state_add_instance(CPUHP_AP_PERF_RISCV_STARTING, &pmu->node);
>         if (ret)
>                 return ret;
> --
> 2.35.1
>


--
Regards,
Atish

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH v3 1/4] RISC-V: Create unique identification for SoC PMU

[Atish Patra]

On Tue, Jun 7, 2022 at 6:17 AM Nikita Shubin <nikita.shubin@maquefel.me> wrote:
>
> From: João Mário Domingos <joao.mario@tecnico.ulisboa.pt>
>
> The SBI PMU platform driver did not provide any identification for
> perf events matching. This patch introduces a new sysfs file inside the
> platform device (soc:pmu/id) for pmu identification.
>
> The identification is a 64-bit value generated as:
> [63-32]: mvendorid;
> [31]: marchid[MSB];
> [30-16]: marchid[15-0];
> [15-0]: mimpid[15MSBs];
>

This is not entirely correct as marchid or mimpid can be MXLEN. The
encoding scheme is left upto the
vendor. We can not assume anything about it.

The purpose of the PMU ID is to distinguish between different
vendors/generations. The perf tool expects
a json string.
I think you can just keep all these 3 registers into the JSON string
as it is to avoid any pitfalls with vendor weirdness.

> The CSRs are detailed in the RISC-V privileged spec [1].
> The marchid is split in MSB + 15LSBs, due to the MSB being used for
> open-source architecture identification.
>
> [1] https://github.com/riscv/riscv-isa-manual
>
> Signed-off-by: João Mário Domingos <joao.mario@tecnico.ulisboa.pt>
> Tested-by: Nikita Shubin <n.shubin@yadro.com>
> ---
>  arch/riscv/kernel/sbi.c      |  3 +++
>  drivers/perf/riscv_pmu_sbi.c | 47 ++++++++++++++++++++++++++++++++++++
>  2 files changed, 50 insertions(+)
>
> diff --git a/arch/riscv/kernel/sbi.c b/arch/riscv/kernel/sbi.c
> index 775d3322b422..50dd9b6ecc9e 100644
> --- a/arch/riscv/kernel/sbi.c
> +++ b/arch/riscv/kernel/sbi.c
> @@ -627,16 +627,19 @@ long sbi_get_mvendorid(void)
>  {
>         return __sbi_base_ecall(SBI_EXT_BASE_GET_MVENDORID);
>  }
> +EXPORT_SYMBOL(sbi_get_mvendorid);
>
>  long sbi_get_marchid(void)
>  {
>         return __sbi_base_ecall(SBI_EXT_BASE_GET_MARCHID);
>  }
> +EXPORT_SYMBOL(sbi_get_marchid);
>
>  long sbi_get_mimpid(void)
>  {
>         return __sbi_base_ecall(SBI_EXT_BASE_GET_MIMPID);
>  }
> +EXPORT_SYMBOL(sbi_get_mimpid);
>
>  static void sbi_send_cpumask_ipi(const struct cpumask *target)
>  {
> diff --git a/drivers/perf/riscv_pmu_sbi.c b/drivers/perf/riscv_pmu_sbi.c
> index a1317a483512..15ab3dc68e7a 100644
> --- a/drivers/perf/riscv_pmu_sbi.c
> +++ b/drivers/perf/riscv_pmu_sbi.c
> @@ -693,6 +693,46 @@ static int pmu_sbi_setup_irqs(struct riscv_pmu *pmu, struct platform_device *pde
>         return 0;
>  }
>
> +static uint64_t pmu_sbi_get_pmu_id(void)
> +{
> +       union sbi_pmu_id {
> +               uint64_t value;
> +               struct {
> +                       uint16_t imp:16;
> +                       uint16_t arch:16;
> +                       uint32_t vendor:32;
> +               };
> +       } pmuid;
> +
> +       pmuid.value = 0;
> +       pmuid.vendor = (uint32_t) sbi_get_mvendorid();
> +       pmuid.arch = (sbi_get_marchid() >> (63 - 15) & (1 << 15)) | (sbi_get_marchid() & 0x7FFF);
> +       pmuid.imp = (sbi_get_mimpid() >> 16);
> +
> +       return pmuid.value;
> +}
> +
> +static ssize_t pmu_sbi_id_show(struct device *dev,
> +               struct device_attribute *attr, char *buf)
> +{
> +       int len;
> +
> +       len = sprintf(buf, "0x%llx\n", pmu_sbi_get_pmu_id());
> +       if (len <= 0)
> +               dev_err(dev, "mydrv: Invalid sprintf len: %dn", len);
> +
> +       return len;
> +}
> +
> +static DEVICE_ATTR(id, S_IRUGO | S_IWUSR, pmu_sbi_id_show, 0);
> +
> +static struct attribute *pmu_sbi_attrs[] = {
> +       &dev_attr_id.attr,
> +       NULL
> +};
> +
> +ATTRIBUTE_GROUPS(pmu_sbi);
> +
>  static int pmu_sbi_device_probe(struct platform_device *pdev)
>  {
>         struct riscv_pmu *pmu = NULL;
> @@ -729,6 +769,13 @@ static int pmu_sbi_device_probe(struct platform_device *pdev)
>         pmu->ctr_clear_idx = pmu_sbi_ctr_clear_idx;
>         pmu->ctr_read = pmu_sbi_ctr_read;
>
> +       ret = sysfs_create_group(&pdev->dev.kobj, &pmu_sbi_group);
> +       if (ret) {
> +               dev_err(&pdev->dev, "sysfs creation failed\n");
> +               return ret;
> +       }
> +       pdev->dev.groups = pmu_sbi_groups;
> +
>         ret = cpuhp_state_add_instance(CPUHP_AP_PERF_RISCV_STARTING, &pmu->node);
>         if (ret)
>                 return ret;
> --
> 2.35.1
>


--
Regards,
Atish

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 1/4] RISC-V: Create unique identification for SoC PMU

[Nikita Shubin]

Hello Atish!

On Tue, 7 Jun 2022 09:37:19 -0700
Atish Patra <atishp@atishpatra.org> wrote:

> On Tue, Jun 7, 2022 at 6:17 AM Nikita Shubin
> <nikita.shubin@maquefel.me> wrote:
> >
> > From: João Mário Domingos <joao.mario@tecnico.ulisboa.pt>
> >
> > The SBI PMU platform driver did not provide any identification for
> > perf events matching. This patch introduces a new sysfs file inside
> > the platform device (soc:pmu/id) for pmu identification.
> >
> > The identification is a 64-bit value generated as:
> > [63-32]: mvendorid;
> > [31]: marchid[MSB];
> > [30-16]: marchid[15-0];
> > [15-0]: mimpid[15MSBs];
> >  
> 
> This is not entirely correct as marchid or mimpid can be MXLEN. The
> encoding scheme is left upto the
> vendor. We can not assume anything about it.
> 
> The purpose of the PMU ID is to distinguish between different
> vendors/generations. The perf tool expects
> a json string.
> I think you can just keep all these 3 registers into the JSON string
> as it is to avoid any pitfalls with vendor weirdness.

This make sense to me. I'll rework this patch according your
suggestions.

Yours,
Nikita Shubin.

> 
> > The CSRs are detailed in the RISC-V privileged spec [1].
> > The marchid is split in MSB + 15LSBs, due to the MSB being used for
> > open-source architecture identification.
> >
> > [1] https://github.com/riscv/riscv-isa-manual
> >
> > Signed-off-by: João Mário Domingos <joao.mario@tecnico.ulisboa.pt>
> > Tested-by: Nikita Shubin <n.shubin@yadro.com>
> > ---
> >  arch/riscv/kernel/sbi.c      |  3 +++
> >  drivers/perf/riscv_pmu_sbi.c | 47
> > ++++++++++++++++++++++++++++++++++++ 2 files changed, 50
> > insertions(+)
> >
> > diff --git a/arch/riscv/kernel/sbi.c b/arch/riscv/kernel/sbi.c
> > index 775d3322b422..50dd9b6ecc9e 100644
> > --- a/arch/riscv/kernel/sbi.c
> > +++ b/arch/riscv/kernel/sbi.c
> > @@ -627,16 +627,19 @@ long sbi_get_mvendorid(void)
> >  {
> >         return __sbi_base_ecall(SBI_EXT_BASE_GET_MVENDORID);
> >  }
> > +EXPORT_SYMBOL(sbi_get_mvendorid);
> >
> >  long sbi_get_marchid(void)
> >  {
> >         return __sbi_base_ecall(SBI_EXT_BASE_GET_MARCHID);
> >  }
> > +EXPORT_SYMBOL(sbi_get_marchid);
> >
> >  long sbi_get_mimpid(void)
> >  {
> >         return __sbi_base_ecall(SBI_EXT_BASE_GET_MIMPID);
> >  }
> > +EXPORT_SYMBOL(sbi_get_mimpid);
> >
> >  static void sbi_send_cpumask_ipi(const struct cpumask *target)
> >  {
> > diff --git a/drivers/perf/riscv_pmu_sbi.c
> > b/drivers/perf/riscv_pmu_sbi.c index a1317a483512..15ab3dc68e7a
> > 100644 --- a/drivers/perf/riscv_pmu_sbi.c
> > +++ b/drivers/perf/riscv_pmu_sbi.c
> > @@ -693,6 +693,46 @@ static int pmu_sbi_setup_irqs(struct riscv_pmu
> > *pmu, struct platform_device *pde return 0;
> >  }
> >
> > +static uint64_t pmu_sbi_get_pmu_id(void)
> > +{
> > +       union sbi_pmu_id {
> > +               uint64_t value;
> > +               struct {
> > +                       uint16_t imp:16;
> > +                       uint16_t arch:16;
> > +                       uint32_t vendor:32;
> > +               };
> > +       } pmuid;
> > +
> > +       pmuid.value = 0;
> > +       pmuid.vendor = (uint32_t) sbi_get_mvendorid();
> > +       pmuid.arch = (sbi_get_marchid() >> (63 - 15) & (1 << 15)) |
> > (sbi_get_marchid() & 0x7FFF);
> > +       pmuid.imp = (sbi_get_mimpid() >> 16);
> > +
> > +       return pmuid.value;
> > +}
> > +
> > +static ssize_t pmu_sbi_id_show(struct device *dev,
> > +               struct device_attribute *attr, char *buf)
> > +{
> > +       int len;
> > +
> > +       len = sprintf(buf, "0x%llx\n", pmu_sbi_get_pmu_id());
> > +       if (len <= 0)
> > +               dev_err(dev, "mydrv: Invalid sprintf len: %dn",
> > len); +
> > +       return len;
> > +}
> > +
> > +static DEVICE_ATTR(id, S_IRUGO | S_IWUSR, pmu_sbi_id_show, 0);
> > +
> > +static struct attribute *pmu_sbi_attrs[] = {
> > +       &dev_attr_id.attr,
> > +       NULL
> > +};
> > +
> > +ATTRIBUTE_GROUPS(pmu_sbi);
> > +
> >  static int pmu_sbi_device_probe(struct platform_device *pdev)
> >  {
> >         struct riscv_pmu *pmu = NULL;
> > @@ -729,6 +769,13 @@ static int pmu_sbi_device_probe(struct
> > platform_device *pdev) pmu->ctr_clear_idx = pmu_sbi_ctr_clear_idx;
> >         pmu->ctr_read = pmu_sbi_ctr_read;
> >
> > +       ret = sysfs_create_group(&pdev->dev.kobj, &pmu_sbi_group);
> > +       if (ret) {
> > +               dev_err(&pdev->dev, "sysfs creation failed\n");
> > +               return ret;
> > +       }
> > +       pdev->dev.groups = pmu_sbi_groups;
> > +
> >         ret =
> > cpuhp_state_add_instance(CPUHP_AP_PERF_RISCV_STARTING, &pmu->node);
> > if (ret) return ret;
> > --
> > 2.35.1
> >  
> 
> 
> --
> Regards,
> Atish


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH v3 1/4] RISC-V: Create unique identification for SoC PMU

[Nikita Shubin]

Hello Atish!

On Tue, 7 Jun 2022 09:37:19 -0700
Atish Patra <atishp@atishpatra.org> wrote:

> On Tue, Jun 7, 2022 at 6:17 AM Nikita Shubin
> <nikita.shubin@maquefel.me> wrote:
> >
> > From: João Mário Domingos <joao.mario@tecnico.ulisboa.pt>
> >
> > The SBI PMU platform driver did not provide any identification for
> > perf events matching. This patch introduces a new sysfs file inside
> > the platform device (soc:pmu/id) for pmu identification.
> >
> > The identification is a 64-bit value generated as:
> > [63-32]: mvendorid;
> > [31]: marchid[MSB];
> > [30-16]: marchid[15-0];
> > [15-0]: mimpid[15MSBs];
> >  
> 
> This is not entirely correct as marchid or mimpid can be MXLEN. The
> encoding scheme is left upto the
> vendor. We can not assume anything about it.
> 
> The purpose of the PMU ID is to distinguish between different
> vendors/generations. The perf tool expects
> a json string.
> I think you can just keep all these 3 registers into the JSON string
> as it is to avoid any pitfalls with vendor weirdness.

This make sense to me. I'll rework this patch according your
suggestions.

Yours,
Nikita Shubin.

> 
> > The CSRs are detailed in the RISC-V privileged spec [1].
> > The marchid is split in MSB + 15LSBs, due to the MSB being used for
> > open-source architecture identification.
> >
> > [1] https://github.com/riscv/riscv-isa-manual
> >
> > Signed-off-by: João Mário Domingos <joao.mario@tecnico.ulisboa.pt>
> > Tested-by: Nikita Shubin <n.shubin@yadro.com>
> > ---
> >  arch/riscv/kernel/sbi.c      |  3 +++
> >  drivers/perf/riscv_pmu_sbi.c | 47
> > ++++++++++++++++++++++++++++++++++++ 2 files changed, 50
> > insertions(+)
> >
> > diff --git a/arch/riscv/kernel/sbi.c b/arch/riscv/kernel/sbi.c
> > index 775d3322b422..50dd9b6ecc9e 100644
> > --- a/arch/riscv/kernel/sbi.c
> > +++ b/arch/riscv/kernel/sbi.c
> > @@ -627,16 +627,19 @@ long sbi_get_mvendorid(void)
> >  {
> >         return __sbi_base_ecall(SBI_EXT_BASE_GET_MVENDORID);
> >  }
> > +EXPORT_SYMBOL(sbi_get_mvendorid);
> >
> >  long sbi_get_marchid(void)
> >  {
> >         return __sbi_base_ecall(SBI_EXT_BASE_GET_MARCHID);
> >  }
> > +EXPORT_SYMBOL(sbi_get_marchid);
> >
> >  long sbi_get_mimpid(void)
> >  {
> >         return __sbi_base_ecall(SBI_EXT_BASE_GET_MIMPID);
> >  }
> > +EXPORT_SYMBOL(sbi_get_mimpid);
> >
> >  static void sbi_send_cpumask_ipi(const struct cpumask *target)
> >  {
> > diff --git a/drivers/perf/riscv_pmu_sbi.c
> > b/drivers/perf/riscv_pmu_sbi.c index a1317a483512..15ab3dc68e7a
> > 100644 --- a/drivers/perf/riscv_pmu_sbi.c
> > +++ b/drivers/perf/riscv_pmu_sbi.c
> > @@ -693,6 +693,46 @@ static int pmu_sbi_setup_irqs(struct riscv_pmu
> > *pmu, struct platform_device *pde return 0;
> >  }
> >
> > +static uint64_t pmu_sbi_get_pmu_id(void)
> > +{
> > +       union sbi_pmu_id {
> > +               uint64_t value;
> > +               struct {
> > +                       uint16_t imp:16;
> > +                       uint16_t arch:16;
> > +                       uint32_t vendor:32;
> > +               };
> > +       } pmuid;
> > +
> > +       pmuid.value = 0;
> > +       pmuid.vendor = (uint32_t) sbi_get_mvendorid();
> > +       pmuid.arch = (sbi_get_marchid() >> (63 - 15) & (1 << 15)) |
> > (sbi_get_marchid() & 0x7FFF);
> > +       pmuid.imp = (sbi_get_mimpid() >> 16);
> > +
> > +       return pmuid.value;
> > +}
> > +
> > +static ssize_t pmu_sbi_id_show(struct device *dev,
> > +               struct device_attribute *attr, char *buf)
> > +{
> > +       int len;
> > +
> > +       len = sprintf(buf, "0x%llx\n", pmu_sbi_get_pmu_id());
> > +       if (len <= 0)
> > +               dev_err(dev, "mydrv: Invalid sprintf len: %dn",
> > len); +
> > +       return len;
> > +}
> > +
> > +static DEVICE_ATTR(id, S_IRUGO | S_IWUSR, pmu_sbi_id_show, 0);
> > +
> > +static struct attribute *pmu_sbi_attrs[] = {
> > +       &dev_attr_id.attr,
> > +       NULL
> > +};
> > +
> > +ATTRIBUTE_GROUPS(pmu_sbi);
> > +
> >  static int pmu_sbi_device_probe(struct platform_device *pdev)
> >  {
> >         struct riscv_pmu *pmu = NULL;
> > @@ -729,6 +769,13 @@ static int pmu_sbi_device_probe(struct
> > platform_device *pdev) pmu->ctr_clear_idx = pmu_sbi_ctr_clear_idx;
> >         pmu->ctr_read = pmu_sbi_ctr_read;
> >
> > +       ret = sysfs_create_group(&pdev->dev.kobj, &pmu_sbi_group);
> > +       if (ret) {
> > +               dev_err(&pdev->dev, "sysfs creation failed\n");
> > +               return ret;
> > +       }
> > +       pdev->dev.groups = pmu_sbi_groups;
> > +
> >         ret =
> > cpuhp_state_add_instance(CPUHP_AP_PERF_RISCV_STARTING, &pmu->node);
> > if (ret) return ret;
> > --
> > 2.35.1
> >  
> 
> 
> --
> Regards,
> Atish


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 1/4] RISC-V: Create unique identification for SoC PMU

[Nikita Shubin]

Hello Atish!

On Tue, 7 Jun 2022 09:37:19 -0700
Atish Patra <atishp@atishpatra.org> wrote:

> On Tue, Jun 7, 2022 at 6:17 AM Nikita Shubin
> <nikita.shubin@maquefel.me> wrote:
> >
> > From: João Mário Domingos <joao.mario@tecnico.ulisboa.pt>
> >
> > The SBI PMU platform driver did not provide any identification for
> > perf events matching. This patch introduces a new sysfs file inside
> > the platform device (soc:pmu/id) for pmu identification.
> >
> > The identification is a 64-bit value generated as:
> > [63-32]: mvendorid;
> > [31]: marchid[MSB];
> > [30-16]: marchid[15-0];
> > [15-0]: mimpid[15MSBs];
> >  
> 
> This is not entirely correct as marchid or mimpid can be MXLEN. The
> encoding scheme is left upto the
> vendor. We can not assume anything about it.
> 
> The purpose of the PMU ID is to distinguish between different
> vendors/generations. The perf tool expects
> a json string.
> I think you can just keep all these 3 registers into the JSON string
> as it is to avoid any pitfalls with vendor weirdness.

This make sense to me. I'll rework this patch according your
suggestions.

Yours,
Nikita Shubin.

> 
> > The CSRs are detailed in the RISC-V privileged spec [1].
> > The marchid is split in MSB + 15LSBs, due to the MSB being used for
> > open-source architecture identification.
> >
> > [1] https://github.com/riscv/riscv-isa-manual
> >
> > Signed-off-by: João Mário Domingos <joao.mario@tecnico.ulisboa.pt>
> > Tested-by: Nikita Shubin <n.shubin@yadro.com>
> > ---
> >  arch/riscv/kernel/sbi.c      |  3 +++
> >  drivers/perf/riscv_pmu_sbi.c | 47
> > ++++++++++++++++++++++++++++++++++++ 2 files changed, 50
> > insertions(+)
> >
> > diff --git a/arch/riscv/kernel/sbi.c b/arch/riscv/kernel/sbi.c
> > index 775d3322b422..50dd9b6ecc9e 100644
> > --- a/arch/riscv/kernel/sbi.c
> > +++ b/arch/riscv/kernel/sbi.c
> > @@ -627,16 +627,19 @@ long sbi_get_mvendorid(void)
> >  {
> >         return __sbi_base_ecall(SBI_EXT_BASE_GET_MVENDORID);
> >  }
> > +EXPORT_SYMBOL(sbi_get_mvendorid);
> >
> >  long sbi_get_marchid(void)
> >  {
> >         return __sbi_base_ecall(SBI_EXT_BASE_GET_MARCHID);
> >  }
> > +EXPORT_SYMBOL(sbi_get_marchid);
> >
> >  long sbi_get_mimpid(void)
> >  {
> >         return __sbi_base_ecall(SBI_EXT_BASE_GET_MIMPID);
> >  }
> > +EXPORT_SYMBOL(sbi_get_mimpid);
> >
> >  static void sbi_send_cpumask_ipi(const struct cpumask *target)
> >  {
> > diff --git a/drivers/perf/riscv_pmu_sbi.c
> > b/drivers/perf/riscv_pmu_sbi.c index a1317a483512..15ab3dc68e7a
> > 100644 --- a/drivers/perf/riscv_pmu_sbi.c
> > +++ b/drivers/perf/riscv_pmu_sbi.c
> > @@ -693,6 +693,46 @@ static int pmu_sbi_setup_irqs(struct riscv_pmu
> > *pmu, struct platform_device *pde return 0;
> >  }
> >
> > +static uint64_t pmu_sbi_get_pmu_id(void)
> > +{
> > +       union sbi_pmu_id {
> > +               uint64_t value;
> > +               struct {
> > +                       uint16_t imp:16;
> > +                       uint16_t arch:16;
> > +                       uint32_t vendor:32;
> > +               };
> > +       } pmuid;
> > +
> > +       pmuid.value = 0;
> > +       pmuid.vendor = (uint32_t) sbi_get_mvendorid();
> > +       pmuid.arch = (sbi_get_marchid() >> (63 - 15) & (1 << 15)) |
> > (sbi_get_marchid() & 0x7FFF);
> > +       pmuid.imp = (sbi_get_mimpid() >> 16);
> > +
> > +       return pmuid.value;
> > +}
> > +
> > +static ssize_t pmu_sbi_id_show(struct device *dev,
> > +               struct device_attribute *attr, char *buf)
> > +{
> > +       int len;
> > +
> > +       len = sprintf(buf, "0x%llx\n", pmu_sbi_get_pmu_id());
> > +       if (len <= 0)
> > +               dev_err(dev, "mydrv: Invalid sprintf len: %dn",
> > len); +
> > +       return len;
> > +}
> > +
> > +static DEVICE_ATTR(id, S_IRUGO | S_IWUSR, pmu_sbi_id_show, 0);
> > +
> > +static struct attribute *pmu_sbi_attrs[] = {
> > +       &dev_attr_id.attr,
> > +       NULL
> > +};
> > +
> > +ATTRIBUTE_GROUPS(pmu_sbi);
> > +
> >  static int pmu_sbi_device_probe(struct platform_device *pdev)
> >  {
> >         struct riscv_pmu *pmu = NULL;
> > @@ -729,6 +769,13 @@ static int pmu_sbi_device_probe(struct
> > platform_device *pdev) pmu->ctr_clear_idx = pmu_sbi_ctr_clear_idx;
> >         pmu->ctr_read = pmu_sbi_ctr_read;
> >
> > +       ret = sysfs_create_group(&pdev->dev.kobj, &pmu_sbi_group);
> > +       if (ret) {
> > +               dev_err(&pdev->dev, "sysfs creation failed\n");
> > +               return ret;
> > +       }
> > +       pdev->dev.groups = pmu_sbi_groups;
> > +
> >         ret =
> > cpuhp_state_add_instance(CPUHP_AP_PERF_RISCV_STARTING, &pmu->node);
> > if (ret) return ret;
> > --
> > 2.35.1
> >  
> 
> 
> --
> Regards,
> Atish

Re: [PATCH v3 3/4] RISC-V: Added generic pmu-events mapfile

[John Garry]

On 07/06/2022 14:16, Nikita Shubin wrote:
> From: João Mário Domingos <joao.mario@tecnico.ulisboa.pt>
> 
> The pmu-events now supports custom events for RISC-V, plus the cycle,
> time and instret events were defined.
> 
> Signed-off-by: João Mário Domingos <joao.mario@tecnico.ulisboa.pt>
> Tested-by: Nikita Shubin <n.shubin@yadro.com>
> ---
>   tools/perf/pmu-events/arch/riscv/mapfile.csv  | 14 +++++++++++++
>   .../pmu-events/arch/riscv/riscv-generic.json  | 20 +++++++++++++++++++
>   2 files changed, 34 insertions(+)
>   create mode 100644 tools/perf/pmu-events/arch/riscv/mapfile.csv
>   create mode 100644 tools/perf/pmu-events/arch/riscv/riscv-generic.json
> 
> diff --git a/tools/perf/pmu-events/arch/riscv/mapfile.csv b/tools/perf/pmu-events/arch/riscv/mapfile.csv
> new file mode 100644
> index 000000000000..4f2aa199d9cb
> --- /dev/null
> +++ b/tools/perf/pmu-events/arch/riscv/mapfile.csv
> @@ -0,0 +1,14 @@
> +# Format:
> +#	MIDR,Version,JSON/file/pathname,Type
> +#
> +# where
> +#	MIDR	Processor version

ARM, no?

> +#		Variant[23:20] and Revision [3:0] should be zero.
> +#	Version could be used to track version of JSON file
> +#		but currently unused.
> +#	JSON/file/pathname is the path to JSON file, relative
> +#		to tools/perf/pmu-events/arch/riscv/.
> +#	Type is core, uncore etc
> +#
> +#
> +#Family-model,Version,Filename,EventType
> diff --git a/tools/perf/pmu-events/arch/riscv/riscv-generic.json b/tools/perf/pmu-events/arch/riscv/riscv-generic.json
> new file mode 100644
> index 000000000000..013e50efad99
> --- /dev/null
> +++ b/tools/perf/pmu-events/arch/riscv/riscv-generic.json

where or how are these referenced?

> @@ -0,0 +1,20 @@
> +[
> +  {
> +    "PublicDescription": "CPU Cycles",
> +    "EventCode": "0x00",
> +    "EventName": "riscv_cycles",
> +    "BriefDescription": "CPU cycles RISC-V generic counter"
> +  },
> +  {
> +    "PublicDescription": "CPU Time",
> +      "EventCode": "0x01",
> +      "EventName": "riscv_time",
> +      "BriefDescription": "CPU time RISC-V generic counter"
> +  },
> +  {
> +    "PublicDescription": "CPU Instructions",
> +      "EventCode": "0x02",
> +      "EventName": "riscv_instret",
> +      "BriefDescription": "CPU retired instructions RISC-V generic counter"
> +  }
> +]
> \ No newline at end of file

Re: [PATCH v3 3/4] RISC-V: Added generic pmu-events mapfile

[John Garry]

On 07/06/2022 14:16, Nikita Shubin wrote:
> From: João Mário Domingos <joao.mario@tecnico.ulisboa.pt>
> 
> The pmu-events now supports custom events for RISC-V, plus the cycle,
> time and instret events were defined.
> 
> Signed-off-by: João Mário Domingos <joao.mario@tecnico.ulisboa.pt>
> Tested-by: Nikita Shubin <n.shubin@yadro.com>
> ---
>   tools/perf/pmu-events/arch/riscv/mapfile.csv  | 14 +++++++++++++
>   .../pmu-events/arch/riscv/riscv-generic.json  | 20 +++++++++++++++++++
>   2 files changed, 34 insertions(+)
>   create mode 100644 tools/perf/pmu-events/arch/riscv/mapfile.csv
>   create mode 100644 tools/perf/pmu-events/arch/riscv/riscv-generic.json
> 
> diff --git a/tools/perf/pmu-events/arch/riscv/mapfile.csv b/tools/perf/pmu-events/arch/riscv/mapfile.csv
> new file mode 100644
> index 000000000000..4f2aa199d9cb
> --- /dev/null
> +++ b/tools/perf/pmu-events/arch/riscv/mapfile.csv
> @@ -0,0 +1,14 @@
> +# Format:
> +#	MIDR,Version,JSON/file/pathname,Type
> +#
> +# where
> +#	MIDR	Processor version

ARM, no?

> +#		Variant[23:20] and Revision [3:0] should be zero.
> +#	Version could be used to track version of JSON file
> +#		but currently unused.
> +#	JSON/file/pathname is the path to JSON file, relative
> +#		to tools/perf/pmu-events/arch/riscv/.
> +#	Type is core, uncore etc
> +#
> +#
> +#Family-model,Version,Filename,EventType
> diff --git a/tools/perf/pmu-events/arch/riscv/riscv-generic.json b/tools/perf/pmu-events/arch/riscv/riscv-generic.json
> new file mode 100644
> index 000000000000..013e50efad99
> --- /dev/null
> +++ b/tools/perf/pmu-events/arch/riscv/riscv-generic.json

where or how are these referenced?

> @@ -0,0 +1,20 @@
> +[
> +  {
> +    "PublicDescription": "CPU Cycles",
> +    "EventCode": "0x00",
> +    "EventName": "riscv_cycles",
> +    "BriefDescription": "CPU cycles RISC-V generic counter"
> +  },
> +  {
> +    "PublicDescription": "CPU Time",
> +      "EventCode": "0x01",
> +      "EventName": "riscv_time",
> +      "BriefDescription": "CPU time RISC-V generic counter"
> +  },
> +  {
> +    "PublicDescription": "CPU Instructions",
> +      "EventCode": "0x02",
> +      "EventName": "riscv_instret",
> +      "BriefDescription": "CPU retired instructions RISC-V generic counter"
> +  }
> +]
> \ No newline at end of file


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH v3 3/4] RISC-V: Added generic pmu-events mapfile

[Nikita Shubin]

Hello, John.

On Wed, 8 Jun 2022 11:45:53 +0100
John Garry <john.garry@huawei.com> wrote:

> On 07/06/2022 14:16, Nikita Shubin wrote:
> > From: João Mário Domingos <joao.mario@tecnico.ulisboa.pt>
> > 
> > The pmu-events now supports custom events for RISC-V, plus the
> > cycle, time and instret events were defined.
> > 
> > Signed-off-by: João Mário Domingos <joao.mario@tecnico.ulisboa.pt>
> > Tested-by: Nikita Shubin <n.shubin@yadro.com>
> > ---
> >   tools/perf/pmu-events/arch/riscv/mapfile.csv  | 14 +++++++++++++
> >   .../pmu-events/arch/riscv/riscv-generic.json  | 20
> > +++++++++++++++++++ 2 files changed, 34 insertions(+)
> >   create mode 100644 tools/perf/pmu-events/arch/riscv/mapfile.csv
> >   create mode 100644
> > tools/perf/pmu-events/arch/riscv/riscv-generic.json
> > 
> > diff --git a/tools/perf/pmu-events/arch/riscv/mapfile.csv
> > b/tools/perf/pmu-events/arch/riscv/mapfile.csv new file mode 100644
> > index 000000000000..4f2aa199d9cb
> > --- /dev/null
> > +++ b/tools/perf/pmu-events/arch/riscv/mapfile.csv
> > @@ -0,0 +1,14 @@
> > +# Format:
> > +#	MIDR,Version,JSON/file/pathname,Type
> > +#
> > +# where
> > +#	MIDR	Processor version  
> 
> ARM, no?

I've messed with --cc-cmd badly and didn't include every one in cover
letter, sorry for that, attaching link to cover letter:

https://lore.kernel.org/all/20220607131648.29439-1-nikita.shubin@maquefel.me/

They are ARM inspired indeed.


> 
> > +#		Variant[23:20] and Revision [3:0] should be zero.
> > +#	Version could be used to track version of JSON file
> > +#		but currently unused.
> > +#	JSON/file/pathname is the path to JSON file, relative
> > +#		to tools/perf/pmu-events/arch/riscv/.
> > +#	Type is core, uncore etc
> > +#
> > +#
> > +#Family-model,Version,Filename,EventType
> > diff --git a/tools/perf/pmu-events/arch/riscv/riscv-generic.json
> > b/tools/perf/pmu-events/arch/riscv/riscv-generic.json new file mode
> > 100644 index 000000000000..013e50efad99
> > --- /dev/null
> > +++ b/tools/perf/pmu-events/arch/riscv/riscv-generic.json  
> 
> where or how are these referenced?

Currently they are not referenced in this version of series at all,
their purpose is to be used like "ArchStdEvent".

Through any RISCV implementation should have at least these 3 events.

Yours,
Nikita Shubin.

> 
> > @@ -0,0 +1,20 @@
> > +[
> > +  {
> > +    "PublicDescription": "CPU Cycles",
> > +    "EventCode": "0x00",
> > +    "EventName": "riscv_cycles",
> > +    "BriefDescription": "CPU cycles RISC-V generic counter"
> > +  },
> > +  {
> > +    "PublicDescription": "CPU Time",
> > +      "EventCode": "0x01",
> > +      "EventName": "riscv_time",
> > +      "BriefDescription": "CPU time RISC-V generic counter"
> > +  },
> > +  {
> > +    "PublicDescription": "CPU Instructions",
> > +      "EventCode": "0x02",
> > +      "EventName": "riscv_instret",
> > +      "BriefDescription": "CPU retired instructions RISC-V generic
> > counter"
> > +  }
> > +]
> > \ No newline at end of file  
> 


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH v3 3/4] RISC-V: Added generic pmu-events mapfile

[Nikita Shubin]

Hello, John.

On Wed, 8 Jun 2022 11:45:53 +0100
John Garry <john.garry@huawei.com> wrote:

> On 07/06/2022 14:16, Nikita Shubin wrote:
> > From: João Mário Domingos <joao.mario@tecnico.ulisboa.pt>
> > 
> > The pmu-events now supports custom events for RISC-V, plus the
> > cycle, time and instret events were defined.
> > 
> > Signed-off-by: João Mário Domingos <joao.mario@tecnico.ulisboa.pt>
> > Tested-by: Nikita Shubin <n.shubin@yadro.com>
> > ---
> >   tools/perf/pmu-events/arch/riscv/mapfile.csv  | 14 +++++++++++++
> >   .../pmu-events/arch/riscv/riscv-generic.json  | 20
> > +++++++++++++++++++ 2 files changed, 34 insertions(+)
> >   create mode 100644 tools/perf/pmu-events/arch/riscv/mapfile.csv
> >   create mode 100644
> > tools/perf/pmu-events/arch/riscv/riscv-generic.json
> > 
> > diff --git a/tools/perf/pmu-events/arch/riscv/mapfile.csv
> > b/tools/perf/pmu-events/arch/riscv/mapfile.csv new file mode 100644
> > index 000000000000..4f2aa199d9cb
> > --- /dev/null
> > +++ b/tools/perf/pmu-events/arch/riscv/mapfile.csv
> > @@ -0,0 +1,14 @@
> > +# Format:
> > +#	MIDR,Version,JSON/file/pathname,Type
> > +#
> > +# where
> > +#	MIDR	Processor version  
> 
> ARM, no?

I've messed with --cc-cmd badly and didn't include every one in cover
letter, sorry for that, attaching link to cover letter:

https://lore.kernel.org/all/20220607131648.29439-1-nikita.shubin@maquefel.me/

They are ARM inspired indeed.


> 
> > +#		Variant[23:20] and Revision [3:0] should be zero.
> > +#	Version could be used to track version of JSON file
> > +#		but currently unused.
> > +#	JSON/file/pathname is the path to JSON file, relative
> > +#		to tools/perf/pmu-events/arch/riscv/.
> > +#	Type is core, uncore etc
> > +#
> > +#
> > +#Family-model,Version,Filename,EventType
> > diff --git a/tools/perf/pmu-events/arch/riscv/riscv-generic.json
> > b/tools/perf/pmu-events/arch/riscv/riscv-generic.json new file mode
> > 100644 index 000000000000..013e50efad99
> > --- /dev/null
> > +++ b/tools/perf/pmu-events/arch/riscv/riscv-generic.json  
> 
> where or how are these referenced?

Currently they are not referenced in this version of series at all,
their purpose is to be used like "ArchStdEvent".

Through any RISCV implementation should have at least these 3 events.

Yours,
Nikita Shubin.

> 
> > @@ -0,0 +1,20 @@
> > +[
> > +  {
> > +    "PublicDescription": "CPU Cycles",
> > +    "EventCode": "0x00",
> > +    "EventName": "riscv_cycles",
> > +    "BriefDescription": "CPU cycles RISC-V generic counter"
> > +  },
> > +  {
> > +    "PublicDescription": "CPU Time",
> > +      "EventCode": "0x01",
> > +      "EventName": "riscv_time",
> > +      "BriefDescription": "CPU time RISC-V generic counter"
> > +  },
> > +  {
> > +    "PublicDescription": "CPU Instructions",
> > +      "EventCode": "0x02",
> > +      "EventName": "riscv_instret",
> > +      "BriefDescription": "CPU retired instructions RISC-V generic
> > counter"
> > +  }
> > +]
> > \ No newline at end of file  
> 

Re: [PATCH v3 3/4] RISC-V: Added generic pmu-events mapfile

[John Garry]

On 08/06/2022 15:41, Nikita Shubin wrote:
>>> mat:
>>> +#	MIDR,Version,JSON/file/pathname,Type
>>> +#
>>> +# where
>>> +#	MIDR	Processor version
>> ARM, no?

I'm just saying that MIDR is for ARM, so please ensure that this term is 
correct for riscv

> I've messed with --cc-cmd badly and didn't include every one in cover
> letter, sorry for that, attaching link to cover letter:
> 
> https://lore.kernel.org/all/20220607131648.29439-1-nikita.shubin@maquefel.me/
> 
> They are ARM inspired indeed.
> 
> 
>>> +#		Variant[23:20] and Revision [3:0] should be zero.
>>> +#	Version could be used to track version of JSON file
>>> +#		but currently unused.
>>> +#	JSON/file/pathname is the path to JSON file, relative
>>> +#		to tools/perf/pmu-events/arch/riscv/.
>>> +#	Type is core, uncore etc
>>> +#
>>> +#
>>> +#Family-model,Version,Filename,EventType
>>> diff --git a/tools/perf/pmu-events/arch/riscv/riscv-generic.json
>>> b/tools/perf/pmu-events/arch/riscv/riscv-generic.json new file mode
>>> 100644 index 000000000000..013e50efad99
>>> --- /dev/null
>>> +++ b/tools/perf/pmu-events/arch/riscv/riscv-generic.json
>> where or how are these referenced?
> Currently they are not referenced in this version of series at all,

ok, right, so a general kernel policy is not to include code which is 
not referenced.

> their purpose is to be used like "ArchStdEvent".
> 
> Through any RISCV implementation should have at least these 3 events.

Thanks,
John

Re: [PATCH v3 3/4] RISC-V: Added generic pmu-events mapfile

[John Garry]

On 08/06/2022 15:41, Nikita Shubin wrote:
>>> mat:
>>> +#	MIDR,Version,JSON/file/pathname,Type
>>> +#
>>> +# where
>>> +#	MIDR	Processor version
>> ARM, no?

I'm just saying that MIDR is for ARM, so please ensure that this term is 
correct for riscv

> I've messed with --cc-cmd badly and didn't include every one in cover
> letter, sorry for that, attaching link to cover letter:
> 
> https://lore.kernel.org/all/20220607131648.29439-1-nikita.shubin@maquefel.me/
> 
> They are ARM inspired indeed.
> 
> 
>>> +#		Variant[23:20] and Revision [3:0] should be zero.
>>> +#	Version could be used to track version of JSON file
>>> +#		but currently unused.
>>> +#	JSON/file/pathname is the path to JSON file, relative
>>> +#		to tools/perf/pmu-events/arch/riscv/.
>>> +#	Type is core, uncore etc
>>> +#
>>> +#
>>> +#Family-model,Version,Filename,EventType
>>> diff --git a/tools/perf/pmu-events/arch/riscv/riscv-generic.json
>>> b/tools/perf/pmu-events/arch/riscv/riscv-generic.json new file mode
>>> 100644 index 000000000000..013e50efad99
>>> --- /dev/null
>>> +++ b/tools/perf/pmu-events/arch/riscv/riscv-generic.json
>> where or how are these referenced?
> Currently they are not referenced in this version of series at all,

ok, right, so a general kernel policy is not to include code which is 
not referenced.

> their purpose is to be used like "ArchStdEvent".
> 
> Through any RISCV implementation should have at least these 3 events.

Thanks,
John

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH v3 2/4] RISC-V: Support CPUID for risc-v in perf

[Will Deacon]

On Tue, Jun 07, 2022 at 04:16:45PM +0300, Nikita Shubin wrote:
> From: João Mário Domingos <joao.mario@tecnico.ulisboa.pt>
> 
> This patch creates the header.c file for the risc-v architecture and introduces support for
> PMU identification through sysfs.
> It is now possible to configure pmu-events in risc-v.
> 
> Depends on patch [1], that introduces the id sysfs file.
> 
> Signed-off-by: João Mário Domingos <joao.mario@tecnico.ulisboa.pt>
> [Nikita: replaced soc:pmu to riscv-pmu/id]
> Signed-off-by: Nikita Shubin <n.shubin@yadro.com>
> Tested-by: Nikita Shubin <n.shubin@yadro.com>
> ---
> v2->v3:
> - Change 'soc/soc:pmu/id' to 'riscv-pmu/id'
> ---
>  drivers/perf/riscv_pmu.c            | 18 ++++++++
>  tools/perf/arch/riscv/util/Build    |  1 +
>  tools/perf/arch/riscv/util/header.c | 66 +++++++++++++++++++++++++++++

You will need to separate out the kernel changes from the tooling changes in
order to get this merged.

Thanks,

Will

Re: [PATCH v3 2/4] RISC-V: Support CPUID for risc-v in perf

[Will Deacon]

On Tue, Jun 07, 2022 at 04:16:45PM +0300, Nikita Shubin wrote:
> From: João Mário Domingos <joao.mario@tecnico.ulisboa.pt>
> 
> This patch creates the header.c file for the risc-v architecture and introduces support for
> PMU identification through sysfs.
> It is now possible to configure pmu-events in risc-v.
> 
> Depends on patch [1], that introduces the id sysfs file.
> 
> Signed-off-by: João Mário Domingos <joao.mario@tecnico.ulisboa.pt>
> [Nikita: replaced soc:pmu to riscv-pmu/id]
> Signed-off-by: Nikita Shubin <n.shubin@yadro.com>
> Tested-by: Nikita Shubin <n.shubin@yadro.com>
> ---
> v2->v3:
> - Change 'soc/soc:pmu/id' to 'riscv-pmu/id'
> ---
>  drivers/perf/riscv_pmu.c            | 18 ++++++++
>  tools/perf/arch/riscv/util/Build    |  1 +
>  tools/perf/arch/riscv/util/header.c | 66 +++++++++++++++++++++++++++++

You will need to separate out the kernel changes from the tooling changes in
order to get this merged.

Thanks,

Will

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH v3 2/4] RISC-V: Support CPUID for risc-v in perf

[Will Deacon]

On Tue, Jun 07, 2022 at 04:16:45PM +0300, Nikita Shubin wrote:
> From: João Mário Domingos <joao.mario@tecnico.ulisboa.pt>
> 
> This patch creates the header.c file for the risc-v architecture and introduces support for
> PMU identification through sysfs.
> It is now possible to configure pmu-events in risc-v.
> 
> Depends on patch [1], that introduces the id sysfs file.
> 
> Signed-off-by: João Mário Domingos <joao.mario@tecnico.ulisboa.pt>
> [Nikita: replaced soc:pmu to riscv-pmu/id]
> Signed-off-by: Nikita Shubin <n.shubin@yadro.com>
> Tested-by: Nikita Shubin <n.shubin@yadro.com>
> ---
> v2->v3:
> - Change 'soc/soc:pmu/id' to 'riscv-pmu/id'
> ---
>  drivers/perf/riscv_pmu.c            | 18 ++++++++
>  tools/perf/arch/riscv/util/Build    |  1 +
>  tools/perf/arch/riscv/util/header.c | 66 +++++++++++++++++++++++++++++

You will need to separate out the kernel changes from the tooling changes in
order to get this merged.

Thanks,

Will

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 1/4] RISC-V: Create unique identification for SoC PMU

[Sunil V L]

Hi Nikita,

On Tue, Jun 07, 2022 at 04:16:44PM +0300, Nikita Shubin wrote:
> From: João Mário Domingos <joao.mario@tecnico.ulisboa.pt>
> 
> The SBI PMU platform driver did not provide any identification for
> perf events matching. This patch introduces a new sysfs file inside the
> platform device (soc:pmu/id) for pmu identification.
> 
> The identification is a 64-bit value generated as:
> [63-32]: mvendorid;
> [31]: marchid[MSB];
> [30-16]: marchid[15-0];
> [15-0]: mimpid[15MSBs];
> 
> The CSRs are detailed in the RISC-V privileged spec [1].
> The marchid is split in MSB + 15LSBs, due to the MSB being used for
> open-source architecture identification.
> 
> [1] https://github.com/riscv/riscv-isa-manual
> 
> Signed-off-by: João Mário Domingos <joao.mario@tecnico.ulisboa.pt>
> Tested-by: Nikita Shubin <n.shubin@yadro.com>
> ---
>  arch/riscv/kernel/sbi.c      |  3 +++
>  drivers/perf/riscv_pmu_sbi.c | 47 ++++++++++++++++++++++++++++++++++++
>  2 files changed, 50 insertions(+)
> 
> diff --git a/arch/riscv/kernel/sbi.c b/arch/riscv/kernel/sbi.c
> index 775d3322b422..50dd9b6ecc9e 100644
> --- a/arch/riscv/kernel/sbi.c
> +++ b/arch/riscv/kernel/sbi.c
> @@ -627,16 +627,19 @@ long sbi_get_mvendorid(void)
>  {
>  	return __sbi_base_ecall(SBI_EXT_BASE_GET_MVENDORID);
>  }
> +EXPORT_SYMBOL(sbi_get_mvendorid);
>  
>  long sbi_get_marchid(void)
>  {
>  	return __sbi_base_ecall(SBI_EXT_BASE_GET_MARCHID);
>  }
> +EXPORT_SYMBOL(sbi_get_marchid);
>  
>  long sbi_get_mimpid(void)
>  {
>  	return __sbi_base_ecall(SBI_EXT_BASE_GET_MIMPID);
>  }
> +EXPORT_SYMBOL(sbi_get_mimpid);
>  
>  static void sbi_send_cpumask_ipi(const struct cpumask *target)
>  {
> diff --git a/drivers/perf/riscv_pmu_sbi.c b/drivers/perf/riscv_pmu_sbi.c
> index a1317a483512..15ab3dc68e7a 100644
> --- a/drivers/perf/riscv_pmu_sbi.c
> +++ b/drivers/perf/riscv_pmu_sbi.c
> @@ -693,6 +693,46 @@ static int pmu_sbi_setup_irqs(struct riscv_pmu *pmu, struct platform_device *pde
>  	return 0;
>  }
>  
> +static uint64_t pmu_sbi_get_pmu_id(void)
> +{
> +	union sbi_pmu_id {
> +		uint64_t value;
> +		struct {
> +			uint16_t imp:16;
> +			uint16_t arch:16;
> +			uint32_t vendor:32;
> +		};
> +	} pmuid;
> +
> +	pmuid.value = 0;
> +	pmuid.vendor = (uint32_t) sbi_get_mvendorid();
> +	pmuid.arch = (sbi_get_marchid() >> (63 - 15) & (1 << 15)) | (sbi_get_marchid() & 0x7FFF);

This statement generates below warning in rv32 build.

drivers/perf/riscv_pmu_sbi.c: In function 'pmu_sbi_get_pmu_id':
 drivers/perf/riscv_pmu_sbi.c:715:41: warning: right shift count >=
 width of type [-Wshift-count-overflow]
  715 |        pmuid.arch = (sbi_get_marchid() >> (63 - 15) & (1 << 15))
  | (sbi_get_marchid() & 0x7FFF);
     

Please take care of this when you rework this patch.

Thanks
Sunil

> +	pmuid.imp = (sbi_get_mimpid() >> 16);
> +
> +	return pmuid.value;
> +}
> +
> +static ssize_t pmu_sbi_id_show(struct device *dev,
> +		struct device_attribute *attr, char *buf)
> +{
> +	int len;
> +
> +	len = sprintf(buf, "0x%llx\n", pmu_sbi_get_pmu_id());
> +	if (len <= 0)
> +		dev_err(dev, "mydrv: Invalid sprintf len: %dn", len);
> +
> +	return len;
> +}
> +
> +static DEVICE_ATTR(id, S_IRUGO | S_IWUSR, pmu_sbi_id_show, 0);
> +
> +static struct attribute *pmu_sbi_attrs[] = {
> +	&dev_attr_id.attr,
> +	NULL
> +};
> +
> +ATTRIBUTE_GROUPS(pmu_sbi);
> +
>  static int pmu_sbi_device_probe(struct platform_device *pdev)
>  {
>  	struct riscv_pmu *pmu = NULL;
> @@ -729,6 +769,13 @@ static int pmu_sbi_device_probe(struct platform_device *pdev)
>  	pmu->ctr_clear_idx = pmu_sbi_ctr_clear_idx;
>  	pmu->ctr_read = pmu_sbi_ctr_read;
>  
> +	ret = sysfs_create_group(&pdev->dev.kobj, &pmu_sbi_group);
> +	if (ret) {
> +		dev_err(&pdev->dev, "sysfs creation failed\n");
> +		return ret;
> +	}
> +	pdev->dev.groups = pmu_sbi_groups;
> +
>  	ret = cpuhp_state_add_instance(CPUHP_AP_PERF_RISCV_STARTING, &pmu->node);
>  	if (ret)
>  		return ret;
> -- 
> 2.35.1
> 
> 
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH v3 1/4] RISC-V: Create unique identification for SoC PMU

[Sunil V L]

Hi Nikita,

On Tue, Jun 07, 2022 at 04:16:44PM +0300, Nikita Shubin wrote:
> From: João Mário Domingos <joao.mario@tecnico.ulisboa.pt>
> 
> The SBI PMU platform driver did not provide any identification for
> perf events matching. This patch introduces a new sysfs file inside the
> platform device (soc:pmu/id) for pmu identification.
> 
> The identification is a 64-bit value generated as:
> [63-32]: mvendorid;
> [31]: marchid[MSB];
> [30-16]: marchid[15-0];
> [15-0]: mimpid[15MSBs];
> 
> The CSRs are detailed in the RISC-V privileged spec [1].
> The marchid is split in MSB + 15LSBs, due to the MSB being used for
> open-source architecture identification.
> 
> [1] https://github.com/riscv/riscv-isa-manual
> 
> Signed-off-by: João Mário Domingos <joao.mario@tecnico.ulisboa.pt>
> Tested-by: Nikita Shubin <n.shubin@yadro.com>
> ---
>  arch/riscv/kernel/sbi.c      |  3 +++
>  drivers/perf/riscv_pmu_sbi.c | 47 ++++++++++++++++++++++++++++++++++++
>  2 files changed, 50 insertions(+)
> 
> diff --git a/arch/riscv/kernel/sbi.c b/arch/riscv/kernel/sbi.c
> index 775d3322b422..50dd9b6ecc9e 100644
> --- a/arch/riscv/kernel/sbi.c
> +++ b/arch/riscv/kernel/sbi.c
> @@ -627,16 +627,19 @@ long sbi_get_mvendorid(void)
>  {
>  	return __sbi_base_ecall(SBI_EXT_BASE_GET_MVENDORID);
>  }
> +EXPORT_SYMBOL(sbi_get_mvendorid);
>  
>  long sbi_get_marchid(void)
>  {
>  	return __sbi_base_ecall(SBI_EXT_BASE_GET_MARCHID);
>  }
> +EXPORT_SYMBOL(sbi_get_marchid);
>  
>  long sbi_get_mimpid(void)
>  {
>  	return __sbi_base_ecall(SBI_EXT_BASE_GET_MIMPID);
>  }
> +EXPORT_SYMBOL(sbi_get_mimpid);
>  
>  static void sbi_send_cpumask_ipi(const struct cpumask *target)
>  {
> diff --git a/drivers/perf/riscv_pmu_sbi.c b/drivers/perf/riscv_pmu_sbi.c
> index a1317a483512..15ab3dc68e7a 100644
> --- a/drivers/perf/riscv_pmu_sbi.c
> +++ b/drivers/perf/riscv_pmu_sbi.c
> @@ -693,6 +693,46 @@ static int pmu_sbi_setup_irqs(struct riscv_pmu *pmu, struct platform_device *pde
>  	return 0;
>  }
>  
> +static uint64_t pmu_sbi_get_pmu_id(void)
> +{
> +	union sbi_pmu_id {
> +		uint64_t value;
> +		struct {
> +			uint16_t imp:16;
> +			uint16_t arch:16;
> +			uint32_t vendor:32;
> +		};
> +	} pmuid;
> +
> +	pmuid.value = 0;
> +	pmuid.vendor = (uint32_t) sbi_get_mvendorid();
> +	pmuid.arch = (sbi_get_marchid() >> (63 - 15) & (1 << 15)) | (sbi_get_marchid() & 0x7FFF);

This statement generates below warning in rv32 build.

drivers/perf/riscv_pmu_sbi.c: In function 'pmu_sbi_get_pmu_id':
 drivers/perf/riscv_pmu_sbi.c:715:41: warning: right shift count >=
 width of type [-Wshift-count-overflow]
  715 |        pmuid.arch = (sbi_get_marchid() >> (63 - 15) & (1 << 15))
  | (sbi_get_marchid() & 0x7FFF);
     

Please take care of this when you rework this patch.

Thanks
Sunil

> +	pmuid.imp = (sbi_get_mimpid() >> 16);
> +
> +	return pmuid.value;
> +}
> +
> +static ssize_t pmu_sbi_id_show(struct device *dev,
> +		struct device_attribute *attr, char *buf)
> +{
> +	int len;
> +
> +	len = sprintf(buf, "0x%llx\n", pmu_sbi_get_pmu_id());
> +	if (len <= 0)
> +		dev_err(dev, "mydrv: Invalid sprintf len: %dn", len);
> +
> +	return len;
> +}
> +
> +static DEVICE_ATTR(id, S_IRUGO | S_IWUSR, pmu_sbi_id_show, 0);
> +
> +static struct attribute *pmu_sbi_attrs[] = {
> +	&dev_attr_id.attr,
> +	NULL
> +};
> +
> +ATTRIBUTE_GROUPS(pmu_sbi);
> +
>  static int pmu_sbi_device_probe(struct platform_device *pdev)
>  {
>  	struct riscv_pmu *pmu = NULL;
> @@ -729,6 +769,13 @@ static int pmu_sbi_device_probe(struct platform_device *pdev)
>  	pmu->ctr_clear_idx = pmu_sbi_ctr_clear_idx;
>  	pmu->ctr_read = pmu_sbi_ctr_read;
>  
> +	ret = sysfs_create_group(&pdev->dev.kobj, &pmu_sbi_group);
> +	if (ret) {
> +		dev_err(&pdev->dev, "sysfs creation failed\n");
> +		return ret;
> +	}
> +	pdev->dev.groups = pmu_sbi_groups;
> +
>  	ret = cpuhp_state_add_instance(CPUHP_AP_PERF_RISCV_STARTING, &pmu->node);
>  	if (ret)
>  		return ret;
> -- 
> 2.35.1
> 
> 
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH v3 1/4] RISC-V: Create unique identification for SoC PMU

[Sunil V L]

Hi Nikita,

On Tue, Jun 07, 2022 at 04:16:44PM +0300, Nikita Shubin wrote:
> From: João Mário Domingos <joao.mario@tecnico.ulisboa.pt>
> 
> The SBI PMU platform driver did not provide any identification for
> perf events matching. This patch introduces a new sysfs file inside the
> platform device (soc:pmu/id) for pmu identification.
> 
> The identification is a 64-bit value generated as:
> [63-32]: mvendorid;
> [31]: marchid[MSB];
> [30-16]: marchid[15-0];
> [15-0]: mimpid[15MSBs];
> 
> The CSRs are detailed in the RISC-V privileged spec [1].
> The marchid is split in MSB + 15LSBs, due to the MSB being used for
> open-source architecture identification.
> 
> [1] https://github.com/riscv/riscv-isa-manual
> 
> Signed-off-by: João Mário Domingos <joao.mario@tecnico.ulisboa.pt>
> Tested-by: Nikita Shubin <n.shubin@yadro.com>
> ---
>  arch/riscv/kernel/sbi.c      |  3 +++
>  drivers/perf/riscv_pmu_sbi.c | 47 ++++++++++++++++++++++++++++++++++++
>  2 files changed, 50 insertions(+)
> 
> diff --git a/arch/riscv/kernel/sbi.c b/arch/riscv/kernel/sbi.c
> index 775d3322b422..50dd9b6ecc9e 100644
> --- a/arch/riscv/kernel/sbi.c
> +++ b/arch/riscv/kernel/sbi.c
> @@ -627,16 +627,19 @@ long sbi_get_mvendorid(void)
>  {
>  	return __sbi_base_ecall(SBI_EXT_BASE_GET_MVENDORID);
>  }
> +EXPORT_SYMBOL(sbi_get_mvendorid);
>  
>  long sbi_get_marchid(void)
>  {
>  	return __sbi_base_ecall(SBI_EXT_BASE_GET_MARCHID);
>  }
> +EXPORT_SYMBOL(sbi_get_marchid);
>  
>  long sbi_get_mimpid(void)
>  {
>  	return __sbi_base_ecall(SBI_EXT_BASE_GET_MIMPID);
>  }
> +EXPORT_SYMBOL(sbi_get_mimpid);
>  
>  static void sbi_send_cpumask_ipi(const struct cpumask *target)
>  {
> diff --git a/drivers/perf/riscv_pmu_sbi.c b/drivers/perf/riscv_pmu_sbi.c
> index a1317a483512..15ab3dc68e7a 100644
> --- a/drivers/perf/riscv_pmu_sbi.c
> +++ b/drivers/perf/riscv_pmu_sbi.c
> @@ -693,6 +693,46 @@ static int pmu_sbi_setup_irqs(struct riscv_pmu *pmu, struct platform_device *pde
>  	return 0;
>  }
>  
> +static uint64_t pmu_sbi_get_pmu_id(void)
> +{
> +	union sbi_pmu_id {
> +		uint64_t value;
> +		struct {
> +			uint16_t imp:16;
> +			uint16_t arch:16;
> +			uint32_t vendor:32;
> +		};
> +	} pmuid;
> +
> +	pmuid.value = 0;
> +	pmuid.vendor = (uint32_t) sbi_get_mvendorid();
> +	pmuid.arch = (sbi_get_marchid() >> (63 - 15) & (1 << 15)) | (sbi_get_marchid() & 0x7FFF);

This statement generates below warning in rv32 build.

drivers/perf/riscv_pmu_sbi.c: In function 'pmu_sbi_get_pmu_id':
 drivers/perf/riscv_pmu_sbi.c:715:41: warning: right shift count >=
 width of type [-Wshift-count-overflow]
  715 |        pmuid.arch = (sbi_get_marchid() >> (63 - 15) & (1 << 15))
  | (sbi_get_marchid() & 0x7FFF);
     

Please take care of this when you rework this patch.

Thanks
Sunil

> +	pmuid.imp = (sbi_get_mimpid() >> 16);
> +
> +	return pmuid.value;
> +}
> +
> +static ssize_t pmu_sbi_id_show(struct device *dev,
> +		struct device_attribute *attr, char *buf)
> +{
> +	int len;
> +
> +	len = sprintf(buf, "0x%llx\n", pmu_sbi_get_pmu_id());
> +	if (len <= 0)
> +		dev_err(dev, "mydrv: Invalid sprintf len: %dn", len);
> +
> +	return len;
> +}
> +
> +static DEVICE_ATTR(id, S_IRUGO | S_IWUSR, pmu_sbi_id_show, 0);
> +
> +static struct attribute *pmu_sbi_attrs[] = {
> +	&dev_attr_id.attr,
> +	NULL
> +};
> +
> +ATTRIBUTE_GROUPS(pmu_sbi);
> +
>  static int pmu_sbi_device_probe(struct platform_device *pdev)
>  {
>  	struct riscv_pmu *pmu = NULL;
> @@ -729,6 +769,13 @@ static int pmu_sbi_device_probe(struct platform_device *pdev)
>  	pmu->ctr_clear_idx = pmu_sbi_ctr_clear_idx;
>  	pmu->ctr_read = pmu_sbi_ctr_read;
>  
> +	ret = sysfs_create_group(&pdev->dev.kobj, &pmu_sbi_group);
> +	if (ret) {
> +		dev_err(&pdev->dev, "sysfs creation failed\n");
> +		return ret;
> +	}
> +	pdev->dev.groups = pmu_sbi_groups;
> +
>  	ret = cpuhp_state_add_instance(CPUHP_AP_PERF_RISCV_STARTING, &pmu->node);
>  	if (ret)
>  		return ret;
> -- 
> 2.35.1
> 
> 
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel