* [xl restore and migrating problem - hardware compatibility]
@ 2016-12-23 16:32 Ing. Ricardo Brisighelli
2016-12-23 17:00 ` Andrew Cooper
0 siblings, 1 reply; 11+ messages in thread
From: Ing. Ricardo Brisighelli @ 2016-12-23 16:32 UTC (permalink / raw)
To: xen-devel
Hi, i'm gentoo user and try with xen 4.6.3 and 4.7.1 in both version have the
same problem.
My cpu is AMD A10-7860K
I run VM as PVlinux, then try migrate to other server (same hardware) and dont
work, same occurs when try restore a saved VM, but this works well (migrate
and restore) if run VM as HVM.
I try same instalation in cpu Intel I7-4790 and ir works well VM as PVlinux
and HVM
Hardware Problem
#cat /proc/cpuinfo (only last core)
proprocessor : 3
vendor_id : AuthenticAMD
cpu family : 21
model : 56
model name : AMD A10-7860K Radeon R7, 12 Compute Cores 4C+8G
stepping : 1
microcode : 0x6003106
cpu MHz : 3591.088
cache size : 2048 KB
physical id : 0
siblings : 4
core id : 3
cpu cores : 4
apicid : 0
initial apicid : 3
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu de tsc msr pae mce cx8 apic mca cmov pat clflush mmx
fxsr sse sse2 ht syscall nx mmxext fxsr_opt l
m constant_tsc rep_good nopl nonstop_tsc extd_apicid eagerfpu pni pclmulqdq
ssse3 fma cx16 sse4_1 sse4_2 popcnt aes xsav
e avx f16c hypervisor lahf_lm cmp_legacy extapic cr8_legacy abm sse4a
misalignsse 3dnowprefetch xop fma4 tce tbm perfctr
_core perfctr_nb bpext arat cpb hw_pstate vmmcall fsgsbase bmi1 xsaveopt
bugs : fxsave_leak
bogomips : 7182.17
TLB size : 1536 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm 100mhzsteps hwpstate cpb eff_freq_ro [13]
Migration problem:
#xl migrate fs dstdomain
migration target: Ready to receive domain.
Saving to migration stream new xl format (info 0x3/0x0/1307)
Loading new save file <incoming migration stream> (new xl fmt info
0x3/0x0/1307)
Savefile contains xl domain config in JSON format
Parsing config from <saved>
xc: info: Saving domain 5, type x86 PV
xc: info: Found x86 PV domain from Xen 4.6
xc: info: Restoring domain
xc: error: X86_PV_VCPU_MSRS record truncated: length 8, min 9: Internal error
xc: error: Restore failed (0 = Success): Internal error
libxl: error: libxl_stream_read.c:749:libxl__xc_domain_restore_done: restoring
domain: Success
libxl: error: libxl_create.c:1144:domcreate_rebuild_done: cannot (re-)build
domain: -3
libxl: error: libxl.c:1610:libxl__destroy_domid: non-existant domain 1
libxl: error: libxl.c:1568:domain_destroy_callback: unable to destroy guest
with domid 1
libxl: error: libxl.c:1495:domain_destroy_cb: destruction of domain 1 failed
migration target: Domain creation failed (code -3).
libxl: error: libxl_utils.c:430:libxl_read_exactly: file/stream truncated
reading ready message from migration receiver
stream
libxl: info: libxl_exec.c:118:libxl_report_child_exitstatus: migration
transport process [4250] exited with error status
3
Migration failed, resuming at sender.
Save and restore problem:
#xl save fs fs.snap
Saving to fs.snap new xl format (info 0x3/0x0/1307)
xc: info: Saving domain 5, type x86 PV
xc: Frames: 131072/131072 100%
xc: End of stream: 0/0 0%
#xl restore fs.snap
Loading new save file fs.snap (new xl fmt info 0x3/0x0/1307)
Savefile contains xl domain config in JSON format
Parsing config from <saved>
xc: info: Found x86 PV domain from Xen 4.6
xc: info: Restoring domain
xc: error: X86_PV_VCPU_MSRS record truncated: length 8, min 9: Internal error
xc: error: Restore failed (0 = Success): Internal error
libxl: error: libxl_stream_read.c:749:libxl__xc_domain_restore_done: restoring
domain: Success
libxl: error: libxl_create.c:1144:domcreate_rebuild_done: cannot (re-)build
domain: -3
libxl: error: libxl.c:1610:libxl__destroy_domid: non-existant domain 6
libxl: error: libxl.c:1568:domain_destroy_callback: unable to destroy guest
with domid 6
libxl: error: libxl.c:1495:domain_destroy_cb: destruction of domain 6 failed
#verify-stream-v2 -v -f xl -i fs.snap
Processed xl header
Libxl Header: little endian
Libxl Record: Libxc context, length 0
Libxc Image Header: little endian
Domain Header: x86 PV from Xen 4.6
Libxc Record: x86 PV info, length 8
64bit guest, 4 levels of pagetables
Libxc Record: x86 PV P2M frames, length 2056
Start pfn 0x0, End 0x1ffff
Squashed 128 Page Data records together
Libxc Record: TSC info, length 24
Mode 0, 3591089 kHz, 1189155414000 ns, incarnation 1
Libxc Record: Shared info, length 4096
Libxc Record: x86 PV vcpu basic, length 5176
vcpu0 basic context, 5168 bytes
Libxc Record: x86 PV vcpu extended, length 64
vcpu0 extended context, 56 bytes
Libxc Record: x86 PV vcpu xsave, length 856
vcpu0 xsave context, 848 bytes
Libxc Record: x86 PV vcpu msrs, length 8
Stream Error:
Traceback (most recent call last):
File "/usr/libexec/xen/bin/verify-stream-v2", line 82, in read_stream
VerifyLibxl(info, stream_read).verify()
File "/usr/lib64/python2.7/site-packages/xen/migration/libxl.py", line 82, in
verify
while self.verify_record() != REC_TYPE_end:
File "/usr/lib64/python2.7/site-packages/xen/migration/libxl.py", line 136,
in verify_record
record_verifiers[rtype](self, content[:length])
File "/usr/lib64/python2.7/site-packages/xen/migration/libxl.py", line 155,
in verify_record_libxc_context
VerifyLibxc(self.info, self.read).verify()
File "/usr/lib64/python2.7/site-packages/xen/migration/libxc.py", line 132,
in verify
while self.verify_record() != REC_TYPE_end:
File "/usr/lib64/python2.7/site-packages/xen/migration/libxc.py", line 227,
in verify_record
record_verifiers[rtype](self, content[:length])
File "/usr/lib64/python2.7/site-packages/xen/migration/libxc.py", line 429,
in <lambda>
VerifyLibxc.verify_record_x86_pv_vcpu_generic(s, x, "msrs"),
File "/usr/lib64/python2.7/site-packages/xen/migration/libxc.py", line 323,
in verify_record_x86_pv_vcpu_generic
" bytes long" % (name, minsz))
RecordError: X86_PV_VCPU_msrs record length must be at least 8 bytes long
Hardware works correcltly
#cat /proc/cpuinfo (last core)
Processor : 7
vendor_id : GenuineIntel
cpu family : 6
model : 60
model name : Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz
stepping : 3
microcode : 0x1c
cpu MHz : 3600.098
cache size : 8192 KB
physical id : 0
siblings : 8
core id : 3
cpu cores : 4
apicid : 7
initial apicid : 7
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu de tsc msr pae mce cx8 apic sep mca cmov pat clflush
acpi mmx fxsr sse sse2 ss ht syscall nx lm co
nstant_tsc arch_perfmon rep_good nopl nonstop_tsc eagerfpu pni pclmulqdq
monitor est ssse3 sdbg fma cx16 sse4_1 sse4_2 m
ovbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand hypervisor lahf_lm
abm ida arat pln pts dtherm fsgsbase bmi1 av
x2 bmi2 erms xsaveopt
bugs :
bogomips : 7200.19
clflush size : 64
Regards.
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [xl restore and migrating problem - hardware compatibility]
2016-12-23 16:32 [xl restore and migrating problem - hardware compatibility] Ing. Ricardo Brisighelli
@ 2016-12-23 17:00 ` Andrew Cooper
2016-12-23 17:16 ` Andrew Cooper
` (2 more replies)
0 siblings, 3 replies; 11+ messages in thread
From: Andrew Cooper @ 2016-12-23 17:00 UTC (permalink / raw)
To: Ing. Ricardo Brisighelli, xen-devel; +Cc: Julien Grall
On 23/12/16 16:32, Ing. Ricardo Brisighelli wrote:
> Hi, i'm gentoo user and try with xen 4.6.3 and 4.7.1 in both version have the
> same problem.
>
> My cpu is AMD A10-7860K
This issue has been reported before ("[Xen-devel] "X86_PV_VCPU_MSRS
record truncated" during domain restore").
I submitted patches to fix it ("Fix issues with zero-length records in
migration v2" in July even), which made no progress. As the author of
migration v2, and unfortunately of this bug, I stand by v1 of my fix
without any further modification.
You can find the patches here:
https://xenbits.xen.org/gitweb/?p=people/andrewcoop/xen.git;a=shortlog;h=refs/heads/tools-fix-zero-length-records
Julien: As 4.9 RM, please mark this as a release blocker. It is very
poor that we as a community had this reported and fixed 6 months ago,
and yet it still didn't make it into 4.8
~Andrew
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [xl restore and migrating problem - hardware compatibility]
2016-12-23 17:00 ` Andrew Cooper
@ 2016-12-23 17:16 ` Andrew Cooper
2016-12-23 22:56 ` Ing. Ricardo Brisighelli
2016-12-28 14:50 ` Julien Grall
2016-12-28 14:58 ` Julien Grall
2 siblings, 1 reply; 11+ messages in thread
From: Andrew Cooper @ 2016-12-23 17:16 UTC (permalink / raw)
To: Ing. Ricardo Brisighelli, xen-devel; +Cc: Julien Grall
On 23/12/16 17:00, Andrew Cooper wrote:
> On 23/12/16 16:32, Ing. Ricardo Brisighelli wrote:
>> Hi, i'm gentoo user and try with xen 4.6.3 and 4.7.1 in both version
>> have the
>> same problem.
>>
>> My cpu is AMD A10-7860K
>
> This issue has been reported before ("[Xen-devel] "X86_PV_VCPU_MSRS
> record truncated" during domain restore").
>
> I submitted patches to fix it ("Fix issues with zero-length records in
> migration v2" in July even), which made no progress. As the author of
> migration v2, and unfortunately of this bug, I stand by v1 of my fix
> without any further modification.
>
> You can find the patches here:
> https://xenbits.xen.org/gitweb/?p=people/andrewcoop/xen.git;a=shortlog;h=refs/heads/tools-fix-zero-length-records
If you don't want to take patches, you should be able to work around the
issue by booting Xen with
cpuid_mask_ext_ecx=fbffffff
Specifically, you are looking to hide the DBEXT feature from Xen so it
doesn't choose to insert them into the migration stream to start with.
This migration bug only manifests when the hardware is capable, but the
VM isn't using the feature.
~Andrew
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [xl restore and migrating problem - hardware compatibility]
2016-12-23 17:16 ` Andrew Cooper
@ 2016-12-23 22:56 ` Ing. Ricardo Brisighelli
2016-12-23 23:22 ` Andrew Cooper
0 siblings, 1 reply; 11+ messages in thread
From: Ing. Ricardo Brisighelli @ 2016-12-23 22:56 UTC (permalink / raw)
To: Andrew Cooper; +Cc: Julien Grall, xen-devel
El Vie 23 Dic 2016 17:16:32 Andrew Cooper escribió:
> On 23/12/16 17:00, Andrew Cooper wrote:
> > On 23/12/16 16:32, Ing. Ricardo Brisighelli wrote:
> >> Hi, i'm gentoo user and try with xen 4.6.3 and 4.7.1 in both version
> >> have the
> >> same problem.
> >>
> >> My cpu is AMD A10-7860K
> >
> > This issue has been reported before ("[Xen-devel] "X86_PV_VCPU_MSRS
> > record truncated" during domain restore").
> >
> > I submitted patches to fix it ("Fix issues with zero-length records in
> > migration v2" in July even), which made no progress. As the author of
> > migration v2, and unfortunately of this bug, I stand by v1 of my fix
> > without any further modification.
> >
> > You can find the patches here:
> > https://xenbits.xen.org/gitweb/?p=people/andrewcoop/xen.git;a=shortlog;h=r
> > efs/heads/tools-fix-zero-length-records
> If you don't want to take patches, you should be able to work around the
> issue by booting Xen with
>
> cpuid_mask_ext_ecx=fbffffff
>
> Specifically, you are looking to hide the DBEXT feature from Xen so it
> doesn't choose to insert them into the migration stream to start with.
> This migration bug only manifests when the hardware is capable, but the
> VM isn't using the feature.
>
> ~Andrew
Hi Andrew, first i try boot xen with cpuid_mask_ext_ecx=fbffffff, restore and
migration works well, then try apply the patchs
tools/python: Adjust migration v2 library to warn about...
tools/libxc: Avoid generating inappropriate zero-length...
tools/libxc: Tolerate zero-length records in migration...
remove cpuid_mask, recompile and install xen-4.7.1, reboot and the problem
persist. I'm missing something?
Regards
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [xl restore and migrating problem - hardware compatibility]
2016-12-23 22:56 ` Ing. Ricardo Brisighelli
@ 2016-12-23 23:22 ` Andrew Cooper
2016-12-24 13:24 ` Ing. Ricardo Brisighelli
0 siblings, 1 reply; 11+ messages in thread
From: Andrew Cooper @ 2016-12-23 23:22 UTC (permalink / raw)
To: Ing. Ricardo Brisighelli; +Cc: Julien Grall, xen-devel
On 23/12/16 22:56, Ing. Ricardo Brisighelli wrote:
> El Vie 23 Dic 2016 17:16:32 Andrew Cooper escribió:
>> On 23/12/16 17:00, Andrew Cooper wrote:
>>> On 23/12/16 16:32, Ing. Ricardo Brisighelli wrote:
>>>> Hi, i'm gentoo user and try with xen 4.6.3 and 4.7.1 in both version
>>>> have the
>>>> same problem.
>>>>
>>>> My cpu is AMD A10-7860K
>>> This issue has been reported before ("[Xen-devel] "X86_PV_VCPU_MSRS
>>> record truncated" during domain restore").
>>>
>>> I submitted patches to fix it ("Fix issues with zero-length records in
>>> migration v2" in July even), which made no progress. As the author of
>>> migration v2, and unfortunately of this bug, I stand by v1 of my fix
>>> without any further modification.
>>>
>>> You can find the patches here:
>>> https://xenbits.xen.org/gitweb/?p=people/andrewcoop/xen.git;a=shortlog;h=r
>>> efs/heads/tools-fix-zero-length-records
>> If you don't want to take patches, you should be able to work around the
>> issue by booting Xen with
>>
>> cpuid_mask_ext_ecx=fbffffff
>>
>> Specifically, you are looking to hide the DBEXT feature from Xen so it
>> doesn't choose to insert them into the migration stream to start with.
>> This migration bug only manifests when the hardware is capable, but the
>> VM isn't using the feature.
>>
>> ~Andrew
> Hi Andrew, first i try boot xen with cpuid_mask_ext_ecx=fbffffff, restore and
> migration works well, then try apply the patchs
>
> tools/python: Adjust migration v2 library to warn about...
> tools/libxc: Avoid generating inappropriate zero-length...
> tools/libxc: Tolerate zero-length records in migration...
>
> remove cpuid_mask, recompile and install xen-4.7.1, reboot and the problem
> persist. I'm missing something?
Does Gentoo split the various parts of Xen apart into sub-packages? This
needs to be the dom0 tools build, not the hypervisor build.
~Andrew
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [xl restore and migrating problem - hardware compatibility]
2016-12-23 23:22 ` Andrew Cooper
@ 2016-12-24 13:24 ` Ing. Ricardo Brisighelli
2016-12-26 20:43 ` Doug Goldstein
0 siblings, 1 reply; 11+ messages in thread
From: Ing. Ricardo Brisighelli @ 2016-12-24 13:24 UTC (permalink / raw)
To: xen-devel; +Cc: Andrew Cooper, Julien Grall
El Vie 23 Dic 2016 23:22:17 Andrew Cooper escribió:
> On 23/12/16 22:56, Ing. Ricardo Brisighelli wrote:
> > El Vie 23 Dic 2016 17:16:32 Andrew Cooper escribió:
> >> On 23/12/16 17:00, Andrew Cooper wrote:
> >>> On 23/12/16 16:32, Ing. Ricardo Brisighelli wrote:
> >>>> Hi, i'm gentoo user and try with xen 4.6.3 and 4.7.1 in both version
> >>>> have the
> >>>> same problem.
> >>>>
> >>>> My cpu is AMD A10-7860K
> >>>
> >>> This issue has been reported before ("[Xen-devel] "X86_PV_VCPU_MSRS
> >>> record truncated" during domain restore").
> >>>
> >>> I submitted patches to fix it ("Fix issues with zero-length records in
> >>> migration v2" in July even), which made no progress. As the author of
> >>> migration v2, and unfortunately of this bug, I stand by v1 of my fix
> >>> without any further modification.
> >>>
> >>> You can find the patches here:
> >>> https://xenbits.xen.org/gitweb/?p=people/andrewcoop/xen.git;a=shortlog;h
> >>> =r
> >>> efs/heads/tools-fix-zero-length-records
> >>
> >> If you don't want to take patches, you should be able to work around the
> >> issue by booting Xen with
> >>
> >> cpuid_mask_ext_ecx=fbffffff
> >>
> >> Specifically, you are looking to hide the DBEXT feature from Xen so it
> >> doesn't choose to insert them into the migration stream to start with.
> >> This migration bug only manifests when the hardware is capable, but the
> >> VM isn't using the feature.
> >>
> >> ~Andrew
> >
> > Hi Andrew, first i try boot xen with cpuid_mask_ext_ecx=fbffffff, restore
> > and migration works well, then try apply the patchs
> >
> > tools/python: Adjust migration v2 library to warn about...
> > tools/libxc: Avoid generating inappropriate zero-length...
> > tools/libxc: Tolerate zero-length records in migration...
> >
> > remove cpuid_mask, recompile and install xen-4.7.1, reboot and the problem
> > persist. I'm missing something?
>
> Does Gentoo split the various parts of Xen apart into sub-packages? This
> needs to be the dom0 tools build, not the hypervisor build.
>
> ~Andrew
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xen.org
> https://lists.xen.org/xen-devel
>
I recompile xen-tools and all works well.
Thanks very much Andrew
Regards
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [xl restore and migrating problem - hardware compatibility]
2016-12-24 13:24 ` Ing. Ricardo Brisighelli
@ 2016-12-26 20:43 ` Doug Goldstein
0 siblings, 0 replies; 11+ messages in thread
From: Doug Goldstein @ 2016-12-26 20:43 UTC (permalink / raw)
To: Ing. Ricardo Brisighelli, xen-devel; +Cc: Andrew Cooper, Julien Grall
[-- Attachment #1.1.1: Type: text/plain, Size: 786 bytes --]
>>>>> This issue has been reported before ("[Xen-devel] "X86_PV_VCPU_MSRS
>>>>> record truncated" during domain restore").
>>>>>
>>>>> I submitted patches to fix it ("Fix issues with zero-length records in
>>>>> migration v2" in July even), which made no progress. As the author of
>>>>> migration v2, and unfortunately of this bug, I stand by v1 of my fix
>>>>> without any further modification.
>>>>>
>>>>> You can find the patches here:
>>>>> https://xenbits.xen.org/gitweb/?p=people/andrewcoop/xen.git;a=shortlog;h
>>>>> =r
>>>>> efs/heads/tools-fix-zero-length-records
>>>>
FWIW, this is fixed in Gentoo now with xen-4.8.0-r1 or xen-4.7.1-r5 and
newer.
https://github.com/gentoo/gentoo/commit/ea2b45715c75943192933e14b58a348027927f2a
--
Doug Goldstein
[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 959 bytes --]
[-- Attachment #2: Type: text/plain, Size: 127 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [xl restore and migrating problem - hardware compatibility]
2016-12-23 17:00 ` Andrew Cooper
2016-12-23 17:16 ` Andrew Cooper
@ 2016-12-28 14:50 ` Julien Grall
2017-01-04 11:00 ` Wei Liu
2016-12-28 14:58 ` Julien Grall
2 siblings, 1 reply; 11+ messages in thread
From: Julien Grall @ 2016-12-28 14:50 UTC (permalink / raw)
To: Andrew Cooper, Ing. Ricardo Brisighelli, xen-devel; +Cc: Wei Liu, Ian Jackson
(Adding Ian and Wei)
Hi Andrew,
On 23/12/16 17:00, Andrew Cooper wrote:
> On 23/12/16 16:32, Ing. Ricardo Brisighelli wrote:
>> Hi, i'm gentoo user and try with xen 4.6.3 and 4.7.1 in both version
>> have the
>> same problem.
>>
>> My cpu is AMD A10-7860K
>
> This issue has been reported before ("[Xen-devel] "X86_PV_VCPU_MSRS
> record truncated" during domain restore").
>
> I submitted patches to fix it ("Fix issues with zero-length records in
> migration v2" in July even), which made no progress. As the author of
> migration v2, and unfortunately of this bug, I stand by v1 of my fix
> without any further modification.
>
> You can find the patches here:
> https://xenbits.xen.org/gitweb/?p=people/andrewcoop/xen.git;a=shortlog;h=refs/heads/tools-fix-zero-length-records
>
>
> Julien: As 4.9 RM, please mark this as a release blocker. It is very
> poor that we as a community had this reported and fixed 6 months ago,
> and yet it still didn't make it into 4.8
Sounds sensible. I will create an entry in the bug tracker.
Cheers,
--
Julien Grall
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [xl restore and migrating problem - hardware compatibility]
2016-12-23 17:00 ` Andrew Cooper
2016-12-23 17:16 ` Andrew Cooper
2016-12-28 14:50 ` Julien Grall
@ 2016-12-28 14:58 ` Julien Grall
2016-12-28 15:00 ` Processed: " xen
2 siblings, 1 reply; 11+ messages in thread
From: Julien Grall @ 2016-12-28 14:58 UTC (permalink / raw)
To: Andrew Cooper, Ing. Ricardo Brisighelli, xen-devel
create ^
severity it blocker
affects it 4.6, 4.7, 4.8
thanks
On 23/12/16 17:00, Andrew Cooper wrote:
> On 23/12/16 16:32, Ing. Ricardo Brisighelli wrote:
>> Hi, i'm gentoo user and try with xen 4.6.3 and 4.7.1 in both version
>> have the
>> same problem.
>>
>> My cpu is AMD A10-7860K
>
> This issue has been reported before ("[Xen-devel] "X86_PV_VCPU_MSRS
> record truncated" during domain restore").
>
> I submitted patches to fix it ("Fix issues with zero-length records in
> migration v2" in July even), which made no progress. As the author of
> migration v2, and unfortunately of this bug, I stand by v1 of my fix
> without any further modification.
>
> You can find the patches here:
> https://xenbits.xen.org/gitweb/?p=people/andrewcoop/xen.git;a=shortlog;h=refs/heads/tools-fix-zero-length-records
>
>
> Julien: As 4.9 RM, please mark this as a release blocker. It is very
> poor that we as a community had this reported and fixed 6 months ago,
> and yet it still didn't make it into 4.8
>
> ~Andrew
--
Julien Grall
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 11+ messages in thread
* Processed: Re: [xl restore and migrating problem - hardware compatibility]
2016-12-28 14:58 ` Julien Grall
@ 2016-12-28 15:00 ` xen
0 siblings, 0 replies; 11+ messages in thread
From: xen @ 2016-12-28 15:00 UTC (permalink / raw)
To: Julien Grall, xen-devel
Processing commands for xen@bugs.xenproject.org:
> create ^
Created new bug #56 rooted at `<a182bc22-6954-5adb-8872-56bf531eaadc@citrix.com>'
Title: `Re: [Xen-devel] [xl restore and migrating problem - hardware compatibility]'
> severity it blocker
Change severity for #56 to `blocker'
> affects it 4.6, 4.7, 4.8
Bug #56 affects `4.6, 4.7, 4.8'
Command failed: Unable to find tag affects:4.6, 4.7, 4.8 at /srv/xen-devel-bugs/share/perl/5.14.2/Emesinae/Bug.pm line 127, <GEN1> line 3.
Stop processing here.
Modified/created Bugs:
- 56: http://bugs.xenproject.org/xen/bug/56 (new)
---
Xen Hypervisor Bug Tracker
See http://wiki.xen.org/wiki/Reporting_Bugs_against_Xen for information on reporting bugs
Contact xen-bugs-owner@bugs.xenproject.org with any infrastructure issues
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [xl restore and migrating problem - hardware compatibility]
2016-12-28 14:50 ` Julien Grall
@ 2017-01-04 11:00 ` Wei Liu
0 siblings, 0 replies; 11+ messages in thread
From: Wei Liu @ 2017-01-04 11:00 UTC (permalink / raw)
To: Julien Grall
Cc: Andrew Cooper, xen-devel, Ian Jackson, Wei Liu, Ing. Ricardo Brisighelli
On Wed, Dec 28, 2016 at 02:50:07PM +0000, Julien Grall wrote:
> (Adding Ian and Wei)
>
> Hi Andrew,
>
> On 23/12/16 17:00, Andrew Cooper wrote:
> >On 23/12/16 16:32, Ing. Ricardo Brisighelli wrote:
> >>Hi, i'm gentoo user and try with xen 4.6.3 and 4.7.1 in both version
> >>have the
> >>same problem.
> >>
> >>My cpu is AMD A10-7860K
> >
> >This issue has been reported before ("[Xen-devel] "X86_PV_VCPU_MSRS
> >record truncated" during domain restore").
> >
> >I submitted patches to fix it ("Fix issues with zero-length records in
> >migration v2" in July even), which made no progress. As the author of
> >migration v2, and unfortunately of this bug, I stand by v1 of my fix
> >without any further modification.
> >
> >You can find the patches here:
> >https://xenbits.xen.org/gitweb/?p=people/andrewcoop/xen.git;a=shortlog;h=refs/heads/tools-fix-zero-length-records
> >
> >
> >Julien: As 4.9 RM, please mark this as a release blocker. It is very
> >poor that we as a community had this reported and fixed 6 months ago,
> >and yet it still didn't make it into 4.8
>
> Sounds sensible. I will create an entry in the bug tracker.
>
Ian made some comments on the old thread but Andrew didn't reply back.
We should resurrect the discussion there.
Wei.
> Cheers,
>
> --
> Julien Grall
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2017-01-04 11:00 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-12-23 16:32 [xl restore and migrating problem - hardware compatibility] Ing. Ricardo Brisighelli
2016-12-23 17:00 ` Andrew Cooper
2016-12-23 17:16 ` Andrew Cooper
2016-12-23 22:56 ` Ing. Ricardo Brisighelli
2016-12-23 23:22 ` Andrew Cooper
2016-12-24 13:24 ` Ing. Ricardo Brisighelli
2016-12-26 20:43 ` Doug Goldstein
2016-12-28 14:50 ` Julien Grall
2017-01-04 11:00 ` Wei Liu
2016-12-28 14:58 ` Julien Grall
2016-12-28 15:00 ` Processed: " xen
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.