* [PATCH v7 1/5] verity: require corruption functionality
2022-03-15 22:15 [PATCH v7 0/5] tests for btrfs fsverity Boris Burkov
@ 2022-03-15 22:15 ` Boris Burkov
2022-03-16 17:21 ` Eric Biggers
2022-03-15 22:15 ` [PATCH v7 2/5] btrfs: test btrfs specific fsverity corruption Boris Burkov
` (3 subsequent siblings)
4 siblings, 1 reply; 11+ messages in thread
From: Boris Burkov @ 2022-03-15 22:15 UTC (permalink / raw)
To: fstests, linux-fscrypt, linux-btrfs, kernel-team
Corrupting ext4 and f2fs relies on xfs_io fiemap. Btrfs corruption
testing will rely on a btrfs specific corruption utility. Add the
ability to require corruption functionality to make this properly
modular. To start, just check for fiemap, as that is needed
universally for _fsv_scratch_corrupt_bytes.
Signed-off-by: Boris Burkov <boris@bur.io>
---
common/verity | 6 ++++++
tests/generic/574 | 1 +
tests/generic/576 | 1 +
3 files changed, 8 insertions(+)
diff --git a/common/verity b/common/verity
index 38eea157..1afe4a82 100644
--- a/common/verity
+++ b/common/verity
@@ -141,6 +141,12 @@ _require_fsverity_dump_metadata()
_fail "Unexpected output from 'fsverity dump_metadata': $(<"$tmpfile")"
}
+# Check for userspace tools needed to corrupt verity data or metadata.
+_require_fsverity_corruption()
+{
+ _require_xfs_io_command "fiemap"
+}
+
_scratch_mkfs_verity()
{
case $FSTYP in
diff --git a/tests/generic/574 b/tests/generic/574
index 882baa21..17fdea52 100755
--- a/tests/generic/574
+++ b/tests/generic/574
@@ -28,6 +28,7 @@ _cleanup()
_supported_fs generic
_require_scratch_verity
_disable_fsverity_signatures
+_require_fsverity_corruption
_scratch_mkfs_verity &>> $seqres.full
_scratch_mount
diff --git a/tests/generic/576 b/tests/generic/576
index 82fbdd71..d3e0a2d6 100755
--- a/tests/generic/576
+++ b/tests/generic/576
@@ -28,6 +28,7 @@ _supported_fs generic
_require_scratch_verity
_require_scratch_encryption
_require_command "$KEYCTL_PROG" keyctl
+_require_fsverity_corruption
_disable_fsverity_signatures
_scratch_mkfs_encrypted_verity &>> $seqres.full
--
2.31.0
^ permalink raw reply related [flat|nested] 11+ messages in thread* Re: [PATCH v7 1/5] verity: require corruption functionality
2022-03-15 22:15 ` [PATCH v7 1/5] verity: require corruption functionality Boris Burkov
@ 2022-03-16 17:21 ` Eric Biggers
0 siblings, 0 replies; 11+ messages in thread
From: Eric Biggers @ 2022-03-16 17:21 UTC (permalink / raw)
To: Boris Burkov; +Cc: fstests, linux-fscrypt, linux-btrfs, kernel-team
On Tue, Mar 15, 2022 at 03:15:57PM -0700, Boris Burkov wrote:
> Corrupting ext4 and f2fs relies on xfs_io fiemap. Btrfs corruption
> testing will rely on a btrfs specific corruption utility. Add the
> ability to require corruption functionality to make this properly
> modular. To start, just check for fiemap, as that is needed
> universally for _fsv_scratch_corrupt_bytes.
>
> Signed-off-by: Boris Burkov <boris@bur.io>
> ---
> common/verity | 6 ++++++
> tests/generic/574 | 1 +
> tests/generic/576 | 1 +
> 3 files changed, 8 insertions(+)
>
> diff --git a/common/verity b/common/verity
> index 38eea157..1afe4a82 100644
> --- a/common/verity
> +++ b/common/verity
> @@ -141,6 +141,12 @@ _require_fsverity_dump_metadata()
> _fail "Unexpected output from 'fsverity dump_metadata': $(<"$tmpfile")"
> }
>
> +# Check for userspace tools needed to corrupt verity data or metadata.
> +_require_fsverity_corruption()
> +{
> + _require_xfs_io_command "fiemap"
> +}
> +
> _scratch_mkfs_verity()
> {
> case $FSTYP in
> diff --git a/tests/generic/574 b/tests/generic/574
> index 882baa21..17fdea52 100755
> --- a/tests/generic/574
> +++ b/tests/generic/574
> @@ -28,6 +28,7 @@ _cleanup()
> _supported_fs generic
> _require_scratch_verity
> _disable_fsverity_signatures
> +_require_fsverity_corruption
>
> _scratch_mkfs_verity &>> $seqres.full
> _scratch_mount
> diff --git a/tests/generic/576 b/tests/generic/576
> index 82fbdd71..d3e0a2d6 100755
> --- a/tests/generic/576
> +++ b/tests/generic/576
> @@ -28,6 +28,7 @@ _supported_fs generic
> _require_scratch_verity
> _require_scratch_encryption
> _require_command "$KEYCTL_PROG" keyctl
> +_require_fsverity_corruption
> _disable_fsverity_signatures
>
> _scratch_mkfs_encrypted_verity &>> $seqres.full
Reviewed-by: Eric Biggers <ebiggers@google.com>
- Eric
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v7 2/5] btrfs: test btrfs specific fsverity corruption
2022-03-15 22:15 [PATCH v7 0/5] tests for btrfs fsverity Boris Burkov
2022-03-15 22:15 ` [PATCH v7 1/5] verity: require corruption functionality Boris Burkov
@ 2022-03-15 22:15 ` Boris Burkov
2022-03-16 17:26 ` Eric Biggers
2022-03-15 22:15 ` [PATCH v7 3/5] generic/574: corrupt btrfs merkle tree data Boris Burkov
` (2 subsequent siblings)
4 siblings, 1 reply; 11+ messages in thread
From: Boris Burkov @ 2022-03-15 22:15 UTC (permalink / raw)
To: fstests, linux-fscrypt, linux-btrfs, kernel-team
There are some btrfs specific fsverity scenarios that don't map
neatly onto the tests in generic/574 like holes, inline extents,
and preallocated extents. Cover those in a btrfs specific test.
This test relies on the btrfs implementation of fsverity in the patch:
btrfs: initial fsverity support
and on btrfs-corrupt-block for corruption in the patches titled:
btrfs-progs: corrupt generic item data with btrfs-corrupt-block
btrfs-progs: expand corrupt_file_extent in btrfs-corrupt-block
Signed-off-by: Boris Burkov <boris@bur.io>
---
common/btrfs | 5 ++
common/config | 1 +
common/verity | 14 ++++
tests/btrfs/290 | 168 ++++++++++++++++++++++++++++++++++++++++++++
tests/btrfs/290.out | 25 +++++++
5 files changed, 213 insertions(+)
create mode 100755 tests/btrfs/290
create mode 100644 tests/btrfs/290.out
diff --git a/common/btrfs b/common/btrfs
index 670d9d1f..c3a7dc6e 100644
--- a/common/btrfs
+++ b/common/btrfs
@@ -511,3 +511,8 @@ _btrfs_metadump()
$BTRFS_IMAGE_PROG "$device" "$dumpfile"
[ -n "$DUMP_COMPRESSOR" ] && $DUMP_COMPRESSOR -f "$dumpfile" &> /dev/null
}
+
+_require_btrfs_corrupt_block()
+{
+ _require_command "$BTRFS_CORRUPT_BLOCK_PROG" btrfs-corrupt-block
+}
diff --git a/common/config b/common/config
index 479e50d1..67bdf912 100644
--- a/common/config
+++ b/common/config
@@ -296,6 +296,7 @@ export BTRFS_UTIL_PROG=$(type -P btrfs)
export BTRFS_SHOW_SUPER_PROG=$(type -P btrfs-show-super)
export BTRFS_CONVERT_PROG=$(type -P btrfs-convert)
export BTRFS_TUNE_PROG=$(type -P btrfstune)
+export BTRFS_CORRUPT_BLOCK_PROG=$(type -P btrfs-corrupt-block)
export XFS_FSR_PROG=$(type -P xfs_fsr)
export MKFS_NFS_PROG="false"
export MKFS_CIFS_PROG="false"
diff --git a/common/verity b/common/verity
index 1afe4a82..77766fca 100644
--- a/common/verity
+++ b/common/verity
@@ -3,6 +3,8 @@
#
# Functions for setting up and testing fs-verity
+. common/btrfs
+
_require_scratch_verity()
{
_require_scratch
@@ -48,6 +50,15 @@ _require_scratch_verity()
FSV_BLOCK_SIZE=$(get_page_size)
}
+# Check for userspace tools needed to corrupt verity data or metadata.
+_require_fsverity_corruption()
+{
+ _require_xfs_io_command "fiemap"
+ if [ $FSTYP == "btrfs" ]; then
+ _require_btrfs_corrupt_block
+ fi
+}
+
# Check for CONFIG_FS_VERITY_BUILTIN_SIGNATURES=y, as well as the userspace
# commands needed to generate certificates and add them to the kernel.
_require_fsverity_builtin_signatures()
@@ -153,6 +164,9 @@ _scratch_mkfs_verity()
ext4|f2fs)
_scratch_mkfs -O verity
;;
+ btrfs)
+ _scratch_mkfs
+ ;;
*)
_notrun "No verity support for $FSTYP"
;;
diff --git a/tests/btrfs/290 b/tests/btrfs/290
new file mode 100755
index 00000000..f9acd55a
--- /dev/null
+++ b/tests/btrfs/290
@@ -0,0 +1,168 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Facebook, Inc. All Rights Reserved.
+#
+# FS QA Test 290
+#
+# Test btrfs support for fsverity.
+# This test extends the generic fsverity testing by corrupting inline extents,
+# preallocated extents, holes, and the Merkle descriptor in a btrfs-aware way.
+#
+. ./common/preamble
+_begin_fstest auto quick verity
+
+# Import common functions.
+. ./common/filter
+. ./common/verity
+
+# real QA test starts here
+_supported_fs btrfs
+_require_scratch_verity
+_require_scratch_nocheck
+_require_odirect
+_require_xfs_io_command "falloc"
+_require_xfs_io_command "pread"
+_require_xfs_io_command "pwrite"
+_require_btrfs_corrupt_block
+
+get_ino() {
+ local file=$1
+ stat -c "%i" $file
+}
+
+validate() {
+ local f=$1
+ local sz=$(_get_filesize $f)
+ # buffered io
+ echo $(basename $f)
+ $XFS_IO_PROG -rc "pread -q 0 $sz" $f 2>&1 | _filter_scratch
+ # direct io
+ $XFS_IO_PROG -rdc "pread -q 0 $sz" $f 2>&1 | _filter_scratch
+}
+
+# corrupt the data portion of an inline extent
+corrupt_inline() {
+ local f=$SCRATCH_MNT/inl
+ $XFS_IO_PROG -fc "pwrite -q -S 0x58 0 42" $f
+ local ino=$(get_ino $f)
+ _fsv_enable $f
+ _scratch_unmount
+ # inline data starts at disk_bytenr
+ # overwrite the first u64 with random bogus junk
+ $BTRFS_CORRUPT_BLOCK_PROG -i $ino -x 0 -f disk_bytenr $SCRATCH_DEV > /dev/null 2>&1
+ _scratch_mount
+ validate $f
+}
+
+# preallocate a file, then corrupt it by changing it to a regular file
+corrupt_prealloc_to_reg() {
+ local f=$SCRATCH_MNT/prealloc
+ $XFS_IO_PROG -fc "falloc 0 12k" $f
+ local ino=$(get_ino $f)
+ _fsv_enable $f
+ _scratch_unmount
+ # set extent type from prealloc (2) to reg (1)
+ $BTRFS_CORRUPT_BLOCK_PROG -i $ino -x 0 -f type -v 1 $SCRATCH_DEV >/dev/null 2>&1
+ _scratch_mount
+ validate $f
+}
+
+# corrupt a regular file by changing the type to preallocated
+corrupt_reg_to_prealloc() {
+ local f=$SCRATCH_MNT/reg
+ $XFS_IO_PROG -fc "pwrite -q -S 0x58 0 12288" $f
+ local ino=$(get_ino $f)
+ _fsv_enable $f
+ _scratch_unmount
+ # set type from reg (1) to prealloc (2)
+ $BTRFS_CORRUPT_BLOCK_PROG -i $ino -x 0 -f type -v 2 $SCRATCH_DEV >/dev/null 2>&1
+ _scratch_mount
+ validate $f
+}
+
+# corrupt a file by punching a hole
+corrupt_punch_hole() {
+ local f=$SCRATCH_MNT/punch
+ $XFS_IO_PROG -fc "pwrite -q -S 0x58 0 12288" $f
+ local ino=$(get_ino $f)
+ # make a new extent in the middle, sync so the writes don't coalesce
+ $XFS_IO_PROG -c sync $SCRATCH_MNT
+ $XFS_IO_PROG -fc "pwrite -q -S 0x59 4096 4096" $f
+ _fsv_enable $f
+ _scratch_unmount
+ # change disk_bytenr to 0, representing a hole
+ $BTRFS_CORRUPT_BLOCK_PROG -i $ino -x 4096 -f disk_bytenr -v 0 $SCRATCH_DEV > /dev/null 2>&1
+ _scratch_mount
+ validate $f
+}
+
+# plug hole
+corrupt_plug_hole() {
+ local f=$SCRATCH_MNT/plug
+ $XFS_IO_PROG -fc "pwrite -q -S 0x58 0 12288" $f
+ local ino=$(get_ino $f)
+ $XFS_IO_PROG -fc "falloc 4k 4k" $f
+ _fsv_enable $f
+ _scratch_unmount
+ # change disk_bytenr to some value, plugging the hole
+ $BTRFS_CORRUPT_BLOCK_PROG -i $ino -x 4096 -f disk_bytenr -v 13639680 $SCRATCH_DEV > /dev/null 2>&1
+ _scratch_mount
+ validate $f
+}
+
+# corrupt the fsverity descriptor item indiscriminately (causes EINVAL)
+corrupt_verity_descriptor() {
+ local f=$SCRATCH_MNT/desc
+ $XFS_IO_PROG -fc "pwrite -q -S 0x58 0 12288" $f
+ local ino=$(get_ino $f)
+ _fsv_enable $f
+ _scratch_unmount
+ # key for the descriptor item is <inode, BTRFS_VERITY_DESC_ITEM_KEY, 1>,
+ # 88 is X. So we write 5 Xs to the start of the descriptor
+ $BTRFS_CORRUPT_BLOCK_PROG -r 5 -I $ino,36,1 -v 88 -o 0 -b 5 $SCRATCH_DEV > /dev/null 2>&1
+ _scratch_mount
+ validate $f
+}
+
+# specifically target the root hash in the descriptor (causes EIO)
+corrupt_root_hash() {
+ local f=$SCRATCH_MNT/roothash
+ $XFS_IO_PROG -fc "pwrite -q -S 0x58 0 12288" $f
+ local ino=$(get_ino $f)
+ _fsv_enable $f
+ _scratch_unmount
+ $BTRFS_CORRUPT_BLOCK_PROG -r 5 -I $ino,36,1 -v 88 -o 16 -b 1 $SCRATCH_DEV > /dev/null 2>&1
+ _scratch_mount
+ validate $f
+}
+
+# corrupt the Merkle tree data itself
+corrupt_merkle_tree() {
+ local f=$SCRATCH_MNT/merkle
+ $XFS_IO_PROG -fc "pwrite -q -S 0x58 0 12288" $f
+ local ino=$(get_ino $f)
+ _fsv_enable $f
+ _scratch_unmount
+ # key for the descriptor item is <inode, BTRFS_VERITY_MERKLE_ITEM_KEY, 0>,
+ # 88 is X. So we write 5 Xs to somewhere in the middle of the first
+ # merkle item
+ $BTRFS_CORRUPT_BLOCK_PROG -r 5 -I $ino,37,0 -v 88 -o 100 -b 5 $SCRATCH_DEV > /dev/null 2>&1
+ _scratch_mount
+ validate $f
+}
+
+# real QA test starts here
+_scratch_mkfs >/dev/null
+_scratch_mount
+
+corrupt_inline
+corrupt_prealloc_to_reg
+corrupt_reg_to_prealloc
+corrupt_punch_hole
+corrupt_plug_hole
+corrupt_verity_descriptor
+corrupt_root_hash
+corrupt_merkle_tree
+
+status=0
+exit
diff --git a/tests/btrfs/290.out b/tests/btrfs/290.out
new file mode 100644
index 00000000..056b114b
--- /dev/null
+++ b/tests/btrfs/290.out
@@ -0,0 +1,25 @@
+QA output created by 290
+inl
+pread: Input/output error
+pread: Input/output error
+prealloc
+pread: Input/output error
+pread: Input/output error
+reg
+pread: Input/output error
+pread: Input/output error
+punch
+pread: Input/output error
+pread: Input/output error
+plug
+pread: Input/output error
+pread: Input/output error
+desc
+SCRATCH_MNT/desc: Invalid argument
+SCRATCH_MNT/desc: Invalid argument
+roothash
+pread: Input/output error
+pread: Input/output error
+merkle
+pread: Input/output error
+pread: Input/output error
--
2.31.0
^ permalink raw reply related [flat|nested] 11+ messages in thread* Re: [PATCH v7 2/5] btrfs: test btrfs specific fsverity corruption
2022-03-15 22:15 ` [PATCH v7 2/5] btrfs: test btrfs specific fsverity corruption Boris Burkov
@ 2022-03-16 17:26 ` Eric Biggers
2022-03-16 17:36 ` Boris Burkov
0 siblings, 1 reply; 11+ messages in thread
From: Eric Biggers @ 2022-03-16 17:26 UTC (permalink / raw)
To: Boris Burkov; +Cc: fstests, linux-fscrypt, linux-btrfs, kernel-team
On Tue, Mar 15, 2022 at 03:15:58PM -0700, Boris Burkov wrote:
> There are some btrfs specific fsverity scenarios that don't map
> neatly onto the tests in generic/574 like holes, inline extents,
> and preallocated extents. Cover those in a btrfs specific test.
>
> This test relies on the btrfs implementation of fsverity in the patch:
> btrfs: initial fsverity support
>
> and on btrfs-corrupt-block for corruption in the patches titled:
> btrfs-progs: corrupt generic item data with btrfs-corrupt-block
> btrfs-progs: expand corrupt_file_extent in btrfs-corrupt-block
>
> Signed-off-by: Boris Burkov <boris@bur.io>
> ---
> common/btrfs | 5 ++
> common/config | 1 +
> common/verity | 14 ++++
> tests/btrfs/290 | 168 ++++++++++++++++++++++++++++++++++++++++++++
> tests/btrfs/290.out | 25 +++++++
> 5 files changed, 213 insertions(+)
> create mode 100755 tests/btrfs/290
> create mode 100644 tests/btrfs/290.out
>
> diff --git a/common/btrfs b/common/btrfs
> index 670d9d1f..c3a7dc6e 100644
> --- a/common/btrfs
> +++ b/common/btrfs
> @@ -511,3 +511,8 @@ _btrfs_metadump()
> $BTRFS_IMAGE_PROG "$device" "$dumpfile"
> [ -n "$DUMP_COMPRESSOR" ] && $DUMP_COMPRESSOR -f "$dumpfile" &> /dev/null
> }
> +
> +_require_btrfs_corrupt_block()
> +{
> + _require_command "$BTRFS_CORRUPT_BLOCK_PROG" btrfs-corrupt-block
> +}
> diff --git a/common/config b/common/config
> index 479e50d1..67bdf912 100644
> --- a/common/config
> +++ b/common/config
> @@ -296,6 +296,7 @@ export BTRFS_UTIL_PROG=$(type -P btrfs)
> export BTRFS_SHOW_SUPER_PROG=$(type -P btrfs-show-super)
> export BTRFS_CONVERT_PROG=$(type -P btrfs-convert)
> export BTRFS_TUNE_PROG=$(type -P btrfstune)
> +export BTRFS_CORRUPT_BLOCK_PROG=$(type -P btrfs-corrupt-block)
> export XFS_FSR_PROG=$(type -P xfs_fsr)
> export MKFS_NFS_PROG="false"
> export MKFS_CIFS_PROG="false"
> diff --git a/common/verity b/common/verity
> index 1afe4a82..77766fca 100644
> --- a/common/verity
> +++ b/common/verity
> @@ -3,6 +3,8 @@
> #
> # Functions for setting up and testing fs-verity
>
> +. common/btrfs
> +
> _require_scratch_verity()
> {
> _require_scratch
> @@ -48,6 +50,15 @@ _require_scratch_verity()
> FSV_BLOCK_SIZE=$(get_page_size)
> }
>
> +# Check for userspace tools needed to corrupt verity data or metadata.
> +_require_fsverity_corruption()
> +{
> + _require_xfs_io_command "fiemap"
> + if [ $FSTYP == "btrfs" ]; then
> + _require_btrfs_corrupt_block
> + fi
> +}
This is adding a second definition of _require_fsverity_corruption().
Probably a rebase error.
Also, is this hunk in the right patch? This patch is for adding btrfs/290;
however, btrfs/290 doesn't use _require_fsverity_corruption() anymore.
> +
> # Check for CONFIG_FS_VERITY_BUILTIN_SIGNATURES=y, as well as the userspace
> # commands needed to generate certificates and add them to the kernel.
> _require_fsverity_builtin_signatures()
> @@ -153,6 +164,9 @@ _scratch_mkfs_verity()
> ext4|f2fs)
> _scratch_mkfs -O verity
> ;;
> + btrfs)
> + _scratch_mkfs
> + ;;
I think a good way to organize things would be to wire up the existing verity
tests for btrfs first, then to add the btrfs-specific tests at thet end of the
series. That would mean the above hunk would go earlier in the series, not with
btrfs/290. It's a little hard to review as-is, as the different hunks needed to
wire up the existing tests are mixed around in different patches.
- Eric
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: [PATCH v7 2/5] btrfs: test btrfs specific fsverity corruption
2022-03-16 17:26 ` Eric Biggers
@ 2022-03-16 17:36 ` Boris Burkov
0 siblings, 0 replies; 11+ messages in thread
From: Boris Burkov @ 2022-03-16 17:36 UTC (permalink / raw)
To: Eric Biggers; +Cc: fstests, linux-fscrypt, linux-btrfs, kernel-team
On Wed, Mar 16, 2022 at 05:26:59PM +0000, Eric Biggers wrote:
> On Tue, Mar 15, 2022 at 03:15:58PM -0700, Boris Burkov wrote:
> > There are some btrfs specific fsverity scenarios that don't map
> > neatly onto the tests in generic/574 like holes, inline extents,
> > and preallocated extents. Cover those in a btrfs specific test.
> >
> > This test relies on the btrfs implementation of fsverity in the patch:
> > btrfs: initial fsverity support
> >
> > and on btrfs-corrupt-block for corruption in the patches titled:
> > btrfs-progs: corrupt generic item data with btrfs-corrupt-block
> > btrfs-progs: expand corrupt_file_extent in btrfs-corrupt-block
> >
> > Signed-off-by: Boris Burkov <boris@bur.io>
> > ---
> > common/btrfs | 5 ++
> > common/config | 1 +
> > common/verity | 14 ++++
> > tests/btrfs/290 | 168 ++++++++++++++++++++++++++++++++++++++++++++
> > tests/btrfs/290.out | 25 +++++++
> > 5 files changed, 213 insertions(+)
> > create mode 100755 tests/btrfs/290
> > create mode 100644 tests/btrfs/290.out
> >
> > diff --git a/common/btrfs b/common/btrfs
> > index 670d9d1f..c3a7dc6e 100644
> > --- a/common/btrfs
> > +++ b/common/btrfs
> > @@ -511,3 +511,8 @@ _btrfs_metadump()
> > $BTRFS_IMAGE_PROG "$device" "$dumpfile"
> > [ -n "$DUMP_COMPRESSOR" ] && $DUMP_COMPRESSOR -f "$dumpfile" &> /dev/null
> > }
> > +
> > +_require_btrfs_corrupt_block()
> > +{
> > + _require_command "$BTRFS_CORRUPT_BLOCK_PROG" btrfs-corrupt-block
> > +}
> > diff --git a/common/config b/common/config
> > index 479e50d1..67bdf912 100644
> > --- a/common/config
> > +++ b/common/config
> > @@ -296,6 +296,7 @@ export BTRFS_UTIL_PROG=$(type -P btrfs)
> > export BTRFS_SHOW_SUPER_PROG=$(type -P btrfs-show-super)
> > export BTRFS_CONVERT_PROG=$(type -P btrfs-convert)
> > export BTRFS_TUNE_PROG=$(type -P btrfstune)
> > +export BTRFS_CORRUPT_BLOCK_PROG=$(type -P btrfs-corrupt-block)
> > export XFS_FSR_PROG=$(type -P xfs_fsr)
> > export MKFS_NFS_PROG="false"
> > export MKFS_CIFS_PROG="false"
> > diff --git a/common/verity b/common/verity
> > index 1afe4a82..77766fca 100644
> > --- a/common/verity
> > +++ b/common/verity
> > @@ -3,6 +3,8 @@
> > #
> > # Functions for setting up and testing fs-verity
> >
> > +. common/btrfs
> > +
> > _require_scratch_verity()
> > {
> > _require_scratch
> > @@ -48,6 +50,15 @@ _require_scratch_verity()
> > FSV_BLOCK_SIZE=$(get_page_size)
> > }
> >
> > +# Check for userspace tools needed to corrupt verity data or metadata.
> > +_require_fsverity_corruption()
> > +{
> > + _require_xfs_io_command "fiemap"
> > + if [ $FSTYP == "btrfs" ]; then
> > + _require_btrfs_corrupt_block
> > + fi
> > +}
>
> This is adding a second definition of _require_fsverity_corruption().
> Probably a rebase error.
>
> Also, is this hunk in the right patch? This patch is for adding btrfs/290;
> however, btrfs/290 doesn't use _require_fsverity_corruption() anymore.
>
> > +
> > # Check for CONFIG_FS_VERITY_BUILTIN_SIGNATURES=y, as well as the userspace
> > # commands needed to generate certificates and add them to the kernel.
> > _require_fsverity_builtin_signatures()
> > @@ -153,6 +164,9 @@ _scratch_mkfs_verity()
> > ext4|f2fs)
> > _scratch_mkfs -O verity
> > ;;
> > + btrfs)
> > + _scratch_mkfs
> > + ;;
>
> I think a good way to organize things would be to wire up the existing verity
> tests for btrfs first, then to add the btrfs-specific tests at thet end of the
> series. That would mean the above hunk would go earlier in the series, not with
> btrfs/290. It's a little hard to review as-is, as the different hunks needed to
> wire up the existing tests are mixed around in different patches.
I like that. I've definitely been struggling with getting all the hunks
in the right places.. I'll double check it all better before sending it
again. Thanks for the review,
Boris
>
> - Eric
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v7 3/5] generic/574: corrupt btrfs merkle tree data
2022-03-15 22:15 [PATCH v7 0/5] tests for btrfs fsverity Boris Burkov
2022-03-15 22:15 ` [PATCH v7 1/5] verity: require corruption functionality Boris Burkov
2022-03-15 22:15 ` [PATCH v7 2/5] btrfs: test btrfs specific fsverity corruption Boris Burkov
@ 2022-03-15 22:15 ` Boris Burkov
2022-03-16 17:29 ` Eric Biggers
2022-03-15 22:16 ` [PATCH v7 4/5] btrfs: test verity orphans with dmlogwrites Boris Burkov
2022-03-15 22:16 ` [PATCH v7 5/5] generic: test fs-verity EFBIG scenarios Boris Burkov
4 siblings, 1 reply; 11+ messages in thread
From: Boris Burkov @ 2022-03-15 22:15 UTC (permalink / raw)
To: fstests, linux-fscrypt, linux-btrfs, kernel-team
generic/574 has tests for corrupting the merkle tree data stored by the
filesystem. Since btrfs uses a different scheme for storing this data,
the existing logic for corrupting it doesn't work out of the box. Adapt
it to properly corrupt btrfs merkle items.
This test relies on the btrfs implementation of fsverity in the patch:
btrfs: initial fsverity support
and on btrfs-corrupt-block for corruption in the patches titled:
btrfs-progs: corrupt generic item data with btrfs-corrupt-block
btrfs-progs: expand corrupt_file_extent in btrfs-corrupt-block
Signed-off-by: Boris Burkov <boris@bur.io>
---
common/verity | 15 +++++++++++++++
tests/generic/574 | 1 +
2 files changed, 16 insertions(+)
diff --git a/common/verity b/common/verity
index 77766fca..db03510e 100644
--- a/common/verity
+++ b/common/verity
@@ -328,6 +328,21 @@ _fsv_scratch_corrupt_merkle_tree()
(( offset += ($(_get_filesize $file) + 65535) & ~65535 ))
_fsv_scratch_corrupt_bytes $file $offset
;;
+ btrfs)
+ local ino=$(stat -c '%i' $file)
+ _scratch_unmount
+ local byte=""
+ while read -n 1 byte; do
+ local ascii=$(printf "%d" "'$byte'")
+ # This command will find a Merkle tree item for the inode (-I $ino,37,0)
+ # in the default filesystem tree (-r 5) and corrupt one byte (-b 1) at
+ # $offset (-o $offset) with the ascii representation of the byte we read
+ # (-v $ascii)
+ $BTRFS_CORRUPT_BLOCK_PROG -r 5 -I $ino,37,0 -v $ascii -o $offset -b 1 $SCRATCH_DEV
+ (( offset += 1 ))
+ done
+ _scratch_mount
+ ;;
*)
_fail "_fsv_scratch_corrupt_merkle_tree() unimplemented on $FSTYP"
;;
diff --git a/tests/generic/574 b/tests/generic/574
index 17fdea52..18810ab2 100755
--- a/tests/generic/574
+++ b/tests/generic/574
@@ -27,6 +27,7 @@ _cleanup()
# real QA test starts here
_supported_fs generic
_require_scratch_verity
+_require_fsverity_corruption
_disable_fsverity_signatures
_require_fsverity_corruption
--
2.31.0
^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH v7 3/5] generic/574: corrupt btrfs merkle tree data
2022-03-15 22:15 ` [PATCH v7 3/5] generic/574: corrupt btrfs merkle tree data Boris Burkov
@ 2022-03-16 17:29 ` Eric Biggers
0 siblings, 0 replies; 11+ messages in thread
From: Eric Biggers @ 2022-03-16 17:29 UTC (permalink / raw)
To: Boris Burkov; +Cc: fstests, linux-fscrypt, linux-btrfs, kernel-team
On Tue, Mar 15, 2022 at 03:15:59PM -0700, Boris Burkov wrote:
> generic/574 has tests for corrupting the merkle tree data stored by the
> filesystem. Since btrfs uses a different scheme for storing this data,
> the existing logic for corrupting it doesn't work out of the box. Adapt
> it to properly corrupt btrfs merkle items.
>
> This test relies on the btrfs implementation of fsverity in the patch:
> btrfs: initial fsverity support
>
> and on btrfs-corrupt-block for corruption in the patches titled:
> btrfs-progs: corrupt generic item data with btrfs-corrupt-block
> btrfs-progs: expand corrupt_file_extent in btrfs-corrupt-block
>
> Signed-off-by: Boris Burkov <boris@bur.io>
> ---
> common/verity | 15 +++++++++++++++
> tests/generic/574 | 1 +
> 2 files changed, 16 insertions(+)
>
> diff --git a/common/verity b/common/verity
> index 77766fca..db03510e 100644
> --- a/common/verity
> +++ b/common/verity
> @@ -328,6 +328,21 @@ _fsv_scratch_corrupt_merkle_tree()
> (( offset += ($(_get_filesize $file) + 65535) & ~65535 ))
> _fsv_scratch_corrupt_bytes $file $offset
> ;;
> + btrfs)
> + local ino=$(stat -c '%i' $file)
> + _scratch_unmount
> + local byte=""
> + while read -n 1 byte; do
> + local ascii=$(printf "%d" "'$byte'")
> + # This command will find a Merkle tree item for the inode (-I $ino,37,0)
> + # in the default filesystem tree (-r 5) and corrupt one byte (-b 1) at
> + # $offset (-o $offset) with the ascii representation of the byte we read
> + # (-v $ascii)
> + $BTRFS_CORRUPT_BLOCK_PROG -r 5 -I $ino,37,0 -v $ascii -o $offset -b 1 $SCRATCH_DEV
> + (( offset += 1 ))
> + done
> + _scratch_mount
> + ;;
> *)
> _fail "_fsv_scratch_corrupt_merkle_tree() unimplemented on $FSTYP"
> ;;
> diff --git a/tests/generic/574 b/tests/generic/574
> index 17fdea52..18810ab2 100755
> --- a/tests/generic/574
> +++ b/tests/generic/574
> @@ -27,6 +27,7 @@ _cleanup()
> # real QA test starts here
> _supported_fs generic
> _require_scratch_verity
> +_require_fsverity_corruption
> _disable_fsverity_signatures
> _require_fsverity_corruption
>
_require_fsverity_corruption is already present above.
That would mean this patch should only change common/verity, and its subject
should have "common/verity", not "generic/574".
- Eric
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v7 4/5] btrfs: test verity orphans with dmlogwrites
2022-03-15 22:15 [PATCH v7 0/5] tests for btrfs fsverity Boris Burkov
` (2 preceding siblings ...)
2022-03-15 22:15 ` [PATCH v7 3/5] generic/574: corrupt btrfs merkle tree data Boris Burkov
@ 2022-03-15 22:16 ` Boris Burkov
2022-03-15 22:16 ` [PATCH v7 5/5] generic: test fs-verity EFBIG scenarios Boris Burkov
4 siblings, 0 replies; 11+ messages in thread
From: Boris Burkov @ 2022-03-15 22:16 UTC (permalink / raw)
To: fstests, linux-fscrypt, linux-btrfs, kernel-team
The behavior of orphans is most interesting across mounts, interrupted
at arbitrary points during fsverity enable. To cover as many such cases
as possible, use dmlogwrites and dmsnapshot as in
log-writes/replay-individual.sh. At each log entry, we want to assert a
somewhat complicated invariant:
If verity has not yet started: an orphan indicates that verity has
started.
If verity has started: mount should handle the orphan and blow away
verity data: expect 0 merkle items after mounting the snapshot dev. If
we can measure the file, verity has finished.
If verity has finished: the orphan should be gone, so mount should not
blow away merkle items. Expect the same number of merkle items before
and after mounting the snapshot dev.
Note that this relies on grepping btrfs inspect-internal dump-tree.
Until btrfs-progs has the ability to print the new Merkle items, they
will show up as UNKNOWN.36/37.
Signed-off-by: Boris Burkov <boris@bur.io>
---
tests/btrfs/291 | 161 ++++++++++++++++++++++++++++++++++++++++++++
tests/btrfs/291.out | 2 +
2 files changed, 163 insertions(+)
create mode 100755 tests/btrfs/291
create mode 100644 tests/btrfs/291.out
diff --git a/tests/btrfs/291 b/tests/btrfs/291
new file mode 100755
index 00000000..1bb3f1b3
--- /dev/null
+++ b/tests/btrfs/291
@@ -0,0 +1,161 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Facebook, Inc. All Rights Reserved.
+#
+# FS QA Test 291
+#
+# Test btrfs consistency after each FUA while enabling verity on a file
+# This test works by following the pattern in log-writes/replay-individual.sh:
+# 1. run a workload (verity + sync) while logging to the log device
+# 2. replay an entry to the replay device
+# 3. snapshot the replay device to the snapshot device
+# 4. run destructive tests on the snapshot device (e.g. mount with orphans)
+# 5. goto 2
+#
+. ./common/preamble
+_begin_fstest auto verity
+
+# Override the default cleanup function.
+_cleanup()
+{
+ cd /
+ _log_writes_cleanup &> /dev/null
+ rm -f $img
+ $LVM_PROG vgremove -f -y $vgname >>$seqres.full 2>&1
+ losetup -d $loop_dev >>$seqres.full 2>&1
+}
+
+# Import common functions.
+. ./common/filter
+. ./common/attr
+. ./common/dmlogwrites
+. ./common/verity
+
+# real QA test starts here
+_supported_fs btrfs
+
+_require_scratch
+_require_test
+_require_log_writes
+_require_dm_target snapshot
+_require_command $LVM_PROG lvm
+_require_scratch_verity
+_require_btrfs_command inspect-internal dump-tree
+_require_test_program "log-writes/replay-log"
+
+sync_loop() {
+ i=$1
+ [ -z "$i" ] && _fail "sync loop needs a number of iterations"
+ while [ $i -gt 0 ]
+ do
+ $XFS_IO_PROG -c sync $SCRATCH_MNT
+ let i-=1
+ done
+}
+
+dump_tree() {
+ local dev=$1
+ $BTRFS_UTIL_PROG inspect-internal dump-tree $dev
+}
+
+count_item() {
+ local dev=$1
+ local item=$2
+ dump_tree $dev | grep -c $item
+}
+
+_log_writes_init $SCRATCH_DEV
+_log_writes_mkfs
+_log_writes_mount
+
+f=$SCRATCH_MNT/fsv
+MB=$((1024 * 1024))
+img=$TEST_DIR/$$.img
+$XFS_IO_PROG -fc "pwrite -q 0 $((10 * $MB))" $f
+$XFS_IO_PROG -c sync $SCRATCH_MNT
+sync_loop 10 &
+sync_proc=$!
+_fsv_enable $f
+$XFS_IO_PROG -c sync $SCRATCH_MNT
+wait $sync_proc
+
+_log_writes_unmount
+_log_writes_remove
+
+# the snapshot and the replay will each be the size of the log writes dev
+# so we create a loop device of size 2 * logwrites and then split it into
+# replay and snapshot with lvm.
+log_writes_blocks=$(blockdev --getsz $LOGWRITES_DEV)
+replay_bytes=$((512 * $log_writes_blocks))
+img_bytes=$((2 * $replay_bytes))
+
+$XFS_IO_PROG -fc "pwrite -q -S 0 $img_bytes $MB" $img >>$seqres.full 2>&1 || \
+ _fail "failed to create image for loop device"
+loop_dev=$(losetup -f --show $img)
+vgname=vg_replay
+lvname=lv_replay
+replay_dev=/dev/mapper/vg_replay-lv_replay
+snapname=lv_snap
+snap_dev=/dev/mapper/vg_replay-$snapname
+
+$LVM_PROG vgcreate -f $vgname $loop_dev >>$seqres.full 2>&1 || _fail "failed to vgcreate $vgname"
+$LVM_PROG lvcreate -L "$replay_bytes"B -n $lvname $vgname -y >>$seqres.full 2>&1 || \
+ _fail "failed to lvcreate $lvname"
+$UDEV_SETTLE_PROG >>$seqres.full 2>&1
+
+replay_log_prog=$here/src/log-writes/replay-log
+num_entries=$($replay_log_prog --log $LOGWRITES_DEV --num-entries)
+entry=$($replay_log_prog --log $LOGWRITES_DEV --replay $replay_dev --find --end-mark mkfs | cut -d@ -f1)
+$replay_log_prog --log $LOGWRITES_DEV --replay $replay_dev --limit $entry || \
+ _fail "failed to replay to start entry $entry"
+let entry+=1
+
+# state = 0: verity hasn't started
+# state = 1: verity underway
+# state = 2: verity done
+state=0
+while [ $entry -lt $num_entries ];
+do
+ $replay_log_prog --limit 1 --log $LOGWRITES_DEV --replay $replay_dev --start $entry || \
+ _fail "failed to take replay step at entry: $entry"
+
+ $LVM_PROG lvcreate -s -L 4M -n $snapname $vgname/$lvname >>$seqres.full 2>&1 || \
+ _fail "Failed to create snapshot"
+ $UDEV_SETTLE_PROG >>$seqres.full 2>&1
+
+ orphan=$(count_item $snap_dev ORPHAN)
+ if [ $state -eq 0 ]; then
+ [ $orphan -gt 0 ] && state=1
+ fi
+
+ pre_mount=$(count_item $snap_dev UNKNOWN.3[67])
+ _mount $snap_dev $SCRATCH_MNT || _fail "mount failed at entry $entry"
+ fsverity measure $SCRATCH_MNT/fsv >>$seqres.full 2>&1
+ measured=$?
+ umount $SCRATCH_MNT
+ [ $state -eq 1 ] && [ $measured -eq 0 ] && state=2
+ [ $state -eq 2 ] && ([ $measured -eq 0 ] || _fail "verity done, but measurement failed at entry $entry")
+ post_mount=$(count_item $snap_dev UNKNOWN.3[67])
+
+ echo "entry: $entry, state: $state, orphan: $orphan, pre_mount: $pre_mount, post_mount: $post_mount" >> $seqres.full
+
+ if [ $state -eq 1 ]; then
+ [ $post_mount -eq 0 ] || \
+ _fail "mount failed to clear under-construction merkle items pre: $pre_mount, post: $post_mount at entry $entry";
+ fi
+ if [ $state -eq 2 ]; then
+ [ $pre_mount -gt 0 ] || \
+ _fail "expected to have verity items before mount at entry $entry"
+ [ $pre_mount -eq $post_mount ] || \
+ _fail "mount cleared merkle items after verity was enabled $pre_mount vs $post_mount at entry $entry";
+ fi
+
+ let entry+=1
+ $LVM_PROG lvremove $vgname/$snapname -y >>$seqres.full
+done
+
+echo "Silence is golden"
+
+# success, all done
+status=0
+exit
diff --git a/tests/btrfs/291.out b/tests/btrfs/291.out
new file mode 100644
index 00000000..04605c70
--- /dev/null
+++ b/tests/btrfs/291.out
@@ -0,0 +1,2 @@
+QA output created by 291
+Silence is golden
--
2.31.0
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH v7 5/5] generic: test fs-verity EFBIG scenarios
2022-03-15 22:15 [PATCH v7 0/5] tests for btrfs fsverity Boris Burkov
` (3 preceding siblings ...)
2022-03-15 22:16 ` [PATCH v7 4/5] btrfs: test verity orphans with dmlogwrites Boris Burkov
@ 2022-03-15 22:16 ` Boris Burkov
2022-03-16 17:30 ` Eric Biggers
4 siblings, 1 reply; 11+ messages in thread
From: Boris Burkov @ 2022-03-15 22:16 UTC (permalink / raw)
To: fstests, linux-fscrypt, linux-btrfs, kernel-team
btrfs, ext4, and f2fs cache the Merkle tree past EOF, which restricts
the maximum file size beneath the normal maximum. Test the logic in
those filesystems against files with sizes near the maximum.
To work properly, this does require some understanding of the practical
but not standardized layout of the Merkle tree. This is a bit unpleasant
and could make the test incorrect in the future, if the implementation
changes. On the other hand, it feels quite useful to test this tricky
edge case. It could perhaps be made more generic by adding some ioctls
to let the file system communicate the maximum file size for a verity
file or some information about the storage of the Merkle tree.
Signed-off-by: Boris Burkov <boris@bur.io>
---
common/verity | 11 ++++++++
tests/generic/690 | 64 +++++++++++++++++++++++++++++++++++++++++++
tests/generic/690.out | 7 +++++
3 files changed, 82 insertions(+)
create mode 100755 tests/generic/690
create mode 100644 tests/generic/690.out
diff --git a/common/verity b/common/verity
index db03510e..2b3d4dae 100644
--- a/common/verity
+++ b/common/verity
@@ -348,3 +348,14 @@ _fsv_scratch_corrupt_merkle_tree()
;;
esac
}
+
+_require_fsverity_max_file_size_limit()
+{
+ case $FSTYP in
+ btrfs|ext4|f2fs)
+ ;;
+ *)
+ _notrun "$FSTYP does not store verity data past EOF; no special file size limit"
+ ;;
+ esac
+}
diff --git a/tests/generic/690 b/tests/generic/690
new file mode 100755
index 00000000..afdd95f2
--- /dev/null
+++ b/tests/generic/690
@@ -0,0 +1,64 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2021 Facebook, Inc. All Rights Reserved.
+#
+# FS QA Test 690
+#
+# fs-verity requires the filesystem to decide how it stores the Merkle tree,
+# which can be quite large.
+# It is convenient to treat the Merkle tree as past EOF, and ext4, f2fs, and
+# btrfs do so in at least some fashion. This leads to an edge case where a
+# large file can be under the file system file size limit, but trigger EFBIG
+# on enabling fs-verity. Test enabling verity on some large files to exercise
+# EFBIG logic for filesystems with fs-verity specific limits.
+#
+. ./common/preamble
+_begin_fstest auto quick verity
+
+
+# Import common functions.
+. ./common/filter
+. ./common/verity
+
+# real QA test starts here
+_supported_fs generic
+_require_test
+_require_math
+_require_scratch_verity
+_require_fsverity_max_file_size_limit
+
+_scratch_mkfs_verity &>> $seqres.full
+_scratch_mount
+
+fsv_file=$SCRATCH_MNT/file.fsv
+
+max_sz=$(_get_max_file_size)
+_fsv_scratch_begin_subtest "way too big: fail on first merkle block"
+truncate -s $max_sz $fsv_file
+_fsv_enable $fsv_file |& _filter_scratch
+
+# The goal of this second test is to make a big enough file that we trip the
+# EFBIG codepath, but not so big that we hit it immediately when writing the
+# first Merkle leaf.
+#
+# The Merkle tree is stored with the leaf node level (L0) last, but it is
+# written first. To get an interesting overflow, we need the maximum file size
+# (MAX) to be in the middle of L0 -- ideally near the beginning of L0 so that we
+# don't have to write many blocks before getting an error.
+#
+# With SHA-256 and 4K blocks, there are 128 hashes per block. Thus, ignoring
+# padding, L0 is 1/128 of the file size while the other levels in total are
+# 1/128**2 + 1/128**3 + 1/128**4 + ... = 1/16256 of the file size. So still
+# ignoring padding, for L0 start exactly at MAX, the file size must be s such
+# that s + s/16256 = MAX, i.e. s = MAX * (16256/16257). Then to get a file size
+# where MAX occurs *near* the start of L0 rather than *at* the start, we can
+# just subtract an overestimate of the padding: 64K after the file contents,
+# then 4K per level, where the consideration of 8 levels is sufficient.
+sz=$(echo "scale=20; $max_sz * (16256/16257) - 65536 - 4096*8" | $BC -q | cut -d. -f1)
+_fsv_scratch_begin_subtest "still too big: fail on first invalid merkle block"
+truncate -s $sz $fsv_file
+_fsv_enable $fsv_file |& _filter_scratch
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/690.out b/tests/generic/690.out
new file mode 100644
index 00000000..a3e2b9b9
--- /dev/null
+++ b/tests/generic/690.out
@@ -0,0 +1,7 @@
+QA output created by 690
+
+# way too big: fail on first merkle block
+ERROR: FS_IOC_ENABLE_VERITY failed on 'SCRATCH_MNT/file.fsv': File too large
+
+# still too big: fail on first invalid merkle block
+ERROR: FS_IOC_ENABLE_VERITY failed on 'SCRATCH_MNT/file.fsv': File too large
--
2.31.0
^ permalink raw reply related [flat|nested] 11+ messages in thread* Re: [PATCH v7 5/5] generic: test fs-verity EFBIG scenarios
2022-03-15 22:16 ` [PATCH v7 5/5] generic: test fs-verity EFBIG scenarios Boris Burkov
@ 2022-03-16 17:30 ` Eric Biggers
0 siblings, 0 replies; 11+ messages in thread
From: Eric Biggers @ 2022-03-16 17:30 UTC (permalink / raw)
To: Boris Burkov; +Cc: fstests, linux-fscrypt, linux-btrfs, kernel-team
On Tue, Mar 15, 2022 at 03:16:01PM -0700, Boris Burkov wrote:
> btrfs, ext4, and f2fs cache the Merkle tree past EOF, which restricts
> the maximum file size beneath the normal maximum. Test the logic in
> those filesystems against files with sizes near the maximum.
>
> To work properly, this does require some understanding of the practical
> but not standardized layout of the Merkle tree. This is a bit unpleasant
> and could make the test incorrect in the future, if the implementation
> changes. On the other hand, it feels quite useful to test this tricky
> edge case. It could perhaps be made more generic by adding some ioctls
> to let the file system communicate the maximum file size for a verity
> file or some information about the storage of the Merkle tree.
>
> Signed-off-by: Boris Burkov <boris@bur.io>
> ---
> common/verity | 11 ++++++++
> tests/generic/690 | 64 +++++++++++++++++++++++++++++++++++++++++++
> tests/generic/690.out | 7 +++++
> 3 files changed, 82 insertions(+)
> create mode 100755 tests/generic/690
> create mode 100644 tests/generic/690.out
Reviewed-by: Eric Biggers <ebiggers@google.com>
- Eric
^ permalink raw reply [flat|nested] 11+ messages in thread