[PATCH v3 0/5] net/usb: asix driver improvements

[PATCH v3 0/5] net/usb: asix driver improvements

[robert.foss]

From: Robert Foss <robert.foss@collabora.com>

This series improves power management of the asix driver.

 - Suspend/resume support is improved to save needed registers.
 - Device disconnection is improved.
 - Fixes AX88772x resume failures
 - Implementes IEEE 802.3 spec section "22.2.4.1.1 Reset" correctly
 - Fixes AX_CMD_WRITE_MEDIUM_MODE being set incorrectly

Changes since v1:
- Added proper metadata tags to series.
- Added two more patches to series.

Changes since v2:
- Added coverletter
- Tested patches on AX88772A/AX88772B/AX88178/AX88179 hardware

Allan Chou (1):
  net: asix: Fix AX88772x resume failures

Freddy Xin (1):
  net: asix: Add in_pm parameter

Grant Grundler (2):
  net: asix: see 802.3 spec for phy reset
  net: asix: autoneg will set WRITE_MEDIUM reg

Vincent Palatin (1):
  net: asix: Avoid looping when the device is disconnected

 drivers/net/usb/asix.h         |  40 ++-
 drivers/net/usb/asix_common.c  | 212 ++++++++++++----
 drivers/net/usb/asix_devices.c | 450 +++++++++++++++++++++++++++-------
 drivers/net/usb/ax88172a.c     |  29 +-
 4 files changed, 575 insertions(+), 156 deletions(-)

-- 
git-series 0.8.10

[PATCH v3 1/5] net: asix: Add in_pm parameter

[robert.foss]

From: Robert Foss <robert.foss@collabora.com>

From: Freddy Xin <freddy@asix.com.tw>

In order to R/W registers in suspend/resume functions, in_pm flags are
added to some functions to determine whether the nopm version of usb
functions is called.

Save BMCR and ANAR PHY registers in suspend function and restore them
in resume function.

Reset HW in resume function to ensure the PHY works correctly.

Signed-off-by: Freddy Xin <freddy@asix.com.tw>
Signed-off-by: Robert Foss <robert.foss@collabora.com>
Tested-by: Robert Foss <robert.foss@collabora.com>
---
 drivers/net/usb/asix.h         |  40 +++-
 drivers/net/usb/asix_common.c  | 180 ++++++++++++----
 drivers/net/usb/asix_devices.c | 373 ++++++++++++++++++++++++++--------
 drivers/net/usb/ax88172a.c     |  29 +--
 4 files changed, 472 insertions(+), 150 deletions(-)

diff --git a/drivers/net/usb/asix.h b/drivers/net/usb/asix.h
index a2d3ea6..d109242 100644
--- a/drivers/net/usb/asix.h
+++ b/drivers/net/usb/asix.h
@@ -46,6 +46,7 @@
 #define AX_CMD_SET_SW_MII		0x06
 #define AX_CMD_READ_MII_REG		0x07
 #define AX_CMD_WRITE_MII_REG		0x08
+#define AX_CMD_STATMNGSTS_REG		0x09
 #define AX_CMD_SET_HW_MII		0x0a
 #define AX_CMD_READ_EEPROM		0x0b
 #define AX_CMD_WRITE_EEPROM		0x0c
@@ -71,6 +72,17 @@
 #define AX_CMD_SW_RESET			0x20
 #define AX_CMD_SW_PHY_STATUS		0x21
 #define AX_CMD_SW_PHY_SELECT		0x22
+#define AX_QCTCTRL			0x2A
+
+#define AX_CHIPCODE_MASK		0x70
+#define AX_AX88772_CHIPCODE		0x00
+#define AX_AX88772A_CHIPCODE		0x10
+#define AX_AX88772B_CHIPCODE		0x20
+#define AX_HOST_EN			0x01
+
+#define AX_PHYSEL_PSEL			0x01
+#define AX_PHYSEL_SSMII			0
+#define AX_PHYSEL_SSEN			0x10
 
 #define AX_PHY_SELECT_MASK		(BIT(3) | BIT(2))
 #define AX_PHY_SELECT_INTERNAL		0
@@ -173,6 +185,10 @@ struct asix_rx_fixup_info {
 };
 
 struct asix_common_private {
+	void (*resume)(struct usbnet *dev);
+	void (*suspend)(struct usbnet *dev);
+	u16 presvd_phy_advertise;
+	u16 presvd_phy_bmcr;
 	struct asix_rx_fixup_info rx_fixup_info;
 };
 
@@ -182,10 +198,10 @@ extern const struct driver_info ax88172a_info;
 #define FLAG_EEPROM_MAC		(1UL << 0)  /* init device MAC from eeprom */
 
 int asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
-		  u16 size, void *data);
+		  u16 size, void *data, int in_pm);
 
 int asix_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
-		   u16 size, void *data);
+		   u16 size, void *data, int in_pm);
 
 void asix_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value,
 			  u16 index, u16 size, void *data);
@@ -197,27 +213,31 @@ int asix_rx_fixup_common(struct usbnet *dev, struct sk_buff *skb);
 struct sk_buff *asix_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
 			      gfp_t flags);
 
-int asix_set_sw_mii(struct usbnet *dev);
-int asix_set_hw_mii(struct usbnet *dev);
+int asix_set_sw_mii(struct usbnet *dev, int in_pm);
+int asix_set_hw_mii(struct usbnet *dev, int in_pm);
 
 int asix_read_phy_addr(struct usbnet *dev, int internal);
 int asix_get_phy_addr(struct usbnet *dev);
 
-int asix_sw_reset(struct usbnet *dev, u8 flags);
+int asix_sw_reset(struct usbnet *dev, u8 flags, int in_pm);
 
-u16 asix_read_rx_ctl(struct usbnet *dev);
-int asix_write_rx_ctl(struct usbnet *dev, u16 mode);
+u16 asix_read_rx_ctl(struct usbnet *dev, int in_pm);
+int asix_write_rx_ctl(struct usbnet *dev, u16 mode, int in_pm);
 
-u16 asix_read_medium_status(struct usbnet *dev);
-int asix_write_medium_mode(struct usbnet *dev, u16 mode);
+u16 asix_read_medium_status(struct usbnet *dev, int in_pm);
+int asix_write_medium_mode(struct usbnet *dev, u16 mode, int in_pm);
 
-int asix_write_gpio(struct usbnet *dev, u16 value, int sleep);
+int asix_write_gpio(struct usbnet *dev, u16 value, int sleep, int in_pm);
 
 void asix_set_multicast(struct net_device *net);
 
 int asix_mdio_read(struct net_device *netdev, int phy_id, int loc);
 void asix_mdio_write(struct net_device *netdev, int phy_id, int loc, int val);
 
+int asix_mdio_read_nopm(struct net_device *netdev, int phy_id, int loc);
+void asix_mdio_write_nopm(struct net_device *netdev, int phy_id, int loc,
+			  int val);
+
 void asix_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo);
 int asix_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo);
 
diff --git a/drivers/net/usb/asix_common.c b/drivers/net/usb/asix_common.c
index 7de5ab5..25609ee 100644
--- a/drivers/net/usb/asix_common.c
+++ b/drivers/net/usb/asix_common.c
@@ -22,24 +22,49 @@
 #include "asix.h"
 
 int asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
-		  u16 size, void *data)
+		  u16 size, void *data, int in_pm)
 {
 	int ret;
-	ret = usbnet_read_cmd(dev, cmd,
-			       USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-			       value, index, data, size);
+	int (*fn)(struct usbnet *, u8, u8, u16, u16, void *, u16);
+
+	BUG_ON(!dev);
+
+	if (!in_pm)
+		fn = usbnet_read_cmd;
+	else
+		fn = usbnet_read_cmd_nopm;
+
+	ret = fn(dev, cmd, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+		 value, index, data, size);
+
+	if (unlikely(ret < 0))
+		netdev_warn(dev->net, "Failed to read reg index 0x%04x: %d\n",
+			    index, ret);
 
-	if (ret != size && ret >= 0)
-		return -EINVAL;
 	return ret;
 }
 
 int asix_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
-		   u16 size, void *data)
+		   u16 size, void *data, int in_pm)
 {
-	return usbnet_write_cmd(dev, cmd,
-				USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-				value, index, data, size);
+	int ret;
+	int (*fn)(struct usbnet *, u8, u8, u16, u16, const void *, u16);
+
+	BUG_ON(!dev);
+
+	if (!in_pm)
+		fn = usbnet_write_cmd;
+	else
+		fn = usbnet_write_cmd_nopm;
+
+	ret = fn(dev, cmd, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+		 value, index, data, size);
+
+	if (unlikely(ret < 0))
+		netdev_warn(dev->net, "Failed to write reg index 0x%04x: %d\n",
+			    index, ret);
+
+	return ret;
 }
 
 void asix_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index,
@@ -225,19 +250,20 @@ struct sk_buff *asix_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
 	return skb;
 }
 
-int asix_set_sw_mii(struct usbnet *dev)
+int asix_set_sw_mii(struct usbnet *dev, int in_pm)
 {
 	int ret;
-	ret = asix_write_cmd(dev, AX_CMD_SET_SW_MII, 0x0000, 0, 0, NULL);
+	ret = asix_write_cmd(dev, AX_CMD_SET_SW_MII, 0x0000, 0, 0, NULL, in_pm);
+
 	if (ret < 0)
 		netdev_err(dev->net, "Failed to enable software MII access\n");
 	return ret;
 }
 
-int asix_set_hw_mii(struct usbnet *dev)
+int asix_set_hw_mii(struct usbnet *dev, int in_pm)
 {
 	int ret;
-	ret = asix_write_cmd(dev, AX_CMD_SET_HW_MII, 0x0000, 0, 0, NULL);
+	ret = asix_write_cmd(dev, AX_CMD_SET_HW_MII, 0x0000, 0, 0, NULL, in_pm);
 	if (ret < 0)
 		netdev_err(dev->net, "Failed to enable hardware MII access\n");
 	return ret;
@@ -247,7 +273,7 @@ int asix_read_phy_addr(struct usbnet *dev, int internal)
 {
 	int offset = (internal ? 1 : 0);
 	u8 buf[2];
-	int ret = asix_read_cmd(dev, AX_CMD_READ_PHY_ID, 0, 0, 2, buf);
+	int ret = asix_read_cmd(dev, AX_CMD_READ_PHY_ID, 0, 0, 2, buf, 0);
 
 	netdev_dbg(dev->net, "asix_get_phy_addr()\n");
 
@@ -270,21 +296,21 @@ int asix_get_phy_addr(struct usbnet *dev)
 }
 
 
-int asix_sw_reset(struct usbnet *dev, u8 flags)
+int asix_sw_reset(struct usbnet *dev, u8 flags, int in_pm)
 {
 	int ret;
 
-        ret = asix_write_cmd(dev, AX_CMD_SW_RESET, flags, 0, 0, NULL);
+	ret = asix_write_cmd(dev, AX_CMD_SW_RESET, flags, 0, 0, NULL, in_pm);
 	if (ret < 0)
 		netdev_err(dev->net, "Failed to send software reset: %02x\n", ret);
 
 	return ret;
 }
 
-u16 asix_read_rx_ctl(struct usbnet *dev)
+u16 asix_read_rx_ctl(struct usbnet *dev, int in_pm)
 {
 	__le16 v;
-	int ret = asix_read_cmd(dev, AX_CMD_READ_RX_CTL, 0, 0, 2, &v);
+	int ret = asix_read_cmd(dev, AX_CMD_READ_RX_CTL, 0, 0, 2, &v, in_pm);
 
 	if (ret < 0) {
 		netdev_err(dev->net, "Error reading RX_CTL register: %02x\n", ret);
@@ -295,12 +321,12 @@ out:
 	return ret;
 }
 
-int asix_write_rx_ctl(struct usbnet *dev, u16 mode)
+int asix_write_rx_ctl(struct usbnet *dev, u16 mode, int in_pm)
 {
 	int ret;
 
 	netdev_dbg(dev->net, "asix_write_rx_ctl() - mode = 0x%04x\n", mode);
-	ret = asix_write_cmd(dev, AX_CMD_WRITE_RX_CTL, mode, 0, 0, NULL);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_RX_CTL, mode, 0, 0, NULL, in_pm);
 	if (ret < 0)
 		netdev_err(dev->net, "Failed to write RX_CTL mode to 0x%04x: %02x\n",
 			   mode, ret);
@@ -308,10 +334,11 @@ int asix_write_rx_ctl(struct usbnet *dev, u16 mode)
 	return ret;
 }
 
-u16 asix_read_medium_status(struct usbnet *dev)
+u16 asix_read_medium_status(struct usbnet *dev, int in_pm)
 {
 	__le16 v;
-	int ret = asix_read_cmd(dev, AX_CMD_READ_MEDIUM_STATUS, 0, 0, 2, &v);
+	int ret = asix_read_cmd(dev, AX_CMD_READ_MEDIUM_STATUS,
+				0, 0, 2, &v, in_pm);
 
 	if (ret < 0) {
 		netdev_err(dev->net, "Error reading Medium Status register: %02x\n",
@@ -323,12 +350,13 @@ u16 asix_read_medium_status(struct usbnet *dev)
 
 }
 
-int asix_write_medium_mode(struct usbnet *dev, u16 mode)
+int asix_write_medium_mode(struct usbnet *dev, u16 mode, int in_pm)
 {
 	int ret;
 
 	netdev_dbg(dev->net, "asix_write_medium_mode() - mode = 0x%04x\n", mode);
-	ret = asix_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE,
+			     mode, 0, 0, NULL, in_pm);
 	if (ret < 0)
 		netdev_err(dev->net, "Failed to write Medium Mode mode to 0x%04x: %02x\n",
 			   mode, ret);
@@ -336,12 +364,12 @@ int asix_write_medium_mode(struct usbnet *dev, u16 mode)
 	return ret;
 }
 
-int asix_write_gpio(struct usbnet *dev, u16 value, int sleep)
+int asix_write_gpio(struct usbnet *dev, u16 value, int sleep, int in_pm)
 {
 	int ret;
 
 	netdev_dbg(dev->net, "asix_write_gpio() - value = 0x%04x\n", value);
-	ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS, value, 0, 0, NULL);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS, value, 0, 0, NULL, in_pm);
 	if (ret < 0)
 		netdev_err(dev->net, "Failed to write GPIO value 0x%04x: %02x\n",
 			   value, ret);
@@ -398,16 +426,23 @@ int asix_mdio_read(struct net_device *netdev, int phy_id, int loc)
 {
 	struct usbnet *dev = netdev_priv(netdev);
 	__le16 res;
+	u8 smsr;
+	int i = 0;
 
 	mutex_lock(&dev->phy_mutex);
-	asix_set_sw_mii(dev);
+	do {
+		asix_set_sw_mii(dev, 0);
+		usleep_range(1000, 1100);
+		asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1, &smsr, 0);
+	} while (!(smsr & AX_HOST_EN) && (i++ < 30));
+
 	asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id,
-				(__u16)loc, 2, &res);
-	asix_set_hw_mii(dev);
+				(__u16)loc, 2, &res, 0);
+	asix_set_hw_mii(dev, 0);
 	mutex_unlock(&dev->phy_mutex);
 
 	netdev_dbg(dev->net, "asix_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n",
-		   phy_id, loc, le16_to_cpu(res));
+			phy_id, loc, le16_to_cpu(res));
 
 	return le16_to_cpu(res);
 }
@@ -416,13 +451,71 @@ void asix_mdio_write(struct net_device *netdev, int phy_id, int loc, int val)
 {
 	struct usbnet *dev = netdev_priv(netdev);
 	__le16 res = cpu_to_le16(val);
+	u8 smsr;
+	int i = 0;
 
 	netdev_dbg(dev->net, "asix_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n",
-		   phy_id, loc, val);
+			phy_id, loc, val);
+
+	mutex_lock(&dev->phy_mutex);
+	do {
+		asix_set_sw_mii(dev, 0);
+		usleep_range(1000, 1100);
+		asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1, &smsr, 0);
+	} while (!(smsr & AX_HOST_EN) && (i++ < 30));
+
+	asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id,
+		       (__u16)loc, 2, &res, 0);
+	asix_set_hw_mii(dev, 0);
+	mutex_unlock(&dev->phy_mutex);
+}
+
+int asix_mdio_read_nopm(struct net_device *netdev, int phy_id, int loc)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	__le16 res;
+	u8 smsr;
+	int i = 0;
+
+	mutex_lock(&dev->phy_mutex);
+	do {
+		asix_set_sw_mii(dev, 1);
+		usleep_range(1000, 1100);
+		asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1, &smsr, 1);
+	} while (!(smsr & AX_HOST_EN) && (i++ < 30));
+
+	asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id,
+		      (__u16)loc, 2, &res, 1);
+	asix_set_hw_mii(dev, 1);
+	mutex_unlock(&dev->phy_mutex);
+
+	netdev_dbg(dev->net, "asix_mdio_read_nopm() phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n",
+			phy_id, loc, le16_to_cpu(res));
+
+	return le16_to_cpu(res);
+}
+
+void
+asix_mdio_write_nopm(struct net_device *netdev, int phy_id, int loc, int val)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	__le16 res = cpu_to_le16(val);
+	u8 smsr;
+	int i = 0;
+
+	netdev_dbg(dev->net, "asix_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n",
+			phy_id, loc, val);
+
 	mutex_lock(&dev->phy_mutex);
-	asix_set_sw_mii(dev);
-	asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id, (__u16)loc, 2, &res);
-	asix_set_hw_mii(dev);
+	do {
+		asix_set_sw_mii(dev, 1);
+		usleep_range(1000, 1100);
+		asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1, &smsr, 1);
+	} while (!(smsr & AX_HOST_EN) && (i++ < 30));
+
+	asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id,
+		       (__u16)loc, 2, &res, 1);
+	asix_set_hw_mii(dev, 1);
 	mutex_unlock(&dev->phy_mutex);
 }
 
@@ -431,7 +524,8 @@ void asix_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
 	struct usbnet *dev = netdev_priv(net);
 	u8 opt;
 
-	if (asix_read_cmd(dev, AX_CMD_READ_MONITOR_MODE, 0, 0, 1, &opt) < 0) {
+	if (asix_read_cmd(dev, AX_CMD_READ_MONITOR_MODE,
+			  0, 0, 1, &opt, 0) < 0) {
 		wolinfo->supported = 0;
 		wolinfo->wolopts = 0;
 		return;
@@ -455,7 +549,7 @@ int asix_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
 		opt |= AX_MONITOR_MAGIC;
 
 	if (asix_write_cmd(dev, AX_CMD_WRITE_MONITOR_MODE,
-			      opt, 0, 0, NULL) < 0)
+			      opt, 0, 0, NULL, 0) < 0)
 		return -EINVAL;
 
 	return 0;
@@ -490,7 +584,7 @@ int asix_get_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
 	/* ax8817x returns 2 bytes from eeprom on read */
 	for (i = first_word; i <= last_word; i++) {
 		if (asix_read_cmd(dev, AX_CMD_READ_EEPROM, i, 0, 2,
-				  &(eeprom_buff[i - first_word])) < 0) {
+				  &eeprom_buff[i - first_word], 0) < 0) {
 			kfree(eeprom_buff);
 			return -EIO;
 		}
@@ -531,7 +625,7 @@ int asix_set_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
 	   the EEPROM */
 	if (eeprom->offset & 1) {
 		ret = asix_read_cmd(dev, AX_CMD_READ_EEPROM, first_word, 0, 2,
-				    &(eeprom_buff[0]));
+				    &eeprom_buff[0], 0);
 		if (ret < 0) {
 			netdev_err(net, "Failed to read EEPROM at offset 0x%02x.\n", first_word);
 			goto free;
@@ -540,7 +634,7 @@ int asix_set_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
 
 	if ((eeprom->offset + eeprom->len) & 1) {
 		ret = asix_read_cmd(dev, AX_CMD_READ_EEPROM, last_word, 0, 2,
-				    &(eeprom_buff[last_word - first_word]));
+				    &eeprom_buff[last_word - first_word], 0);
 		if (ret < 0) {
 			netdev_err(net, "Failed to read EEPROM at offset 0x%02x.\n", last_word);
 			goto free;
@@ -550,7 +644,7 @@ int asix_set_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
 	memcpy((u8 *)eeprom_buff + (eeprom->offset & 1), data, eeprom->len);
 
 	/* write data to EEPROM */
-	ret = asix_write_cmd(dev, AX_CMD_WRITE_ENABLE, 0x0000, 0, 0, NULL);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_ENABLE, 0x0000, 0, 0, NULL, 0);
 	if (ret < 0) {
 		netdev_err(net, "Failed to enable EEPROM write\n");
 		goto free;
@@ -561,7 +655,7 @@ int asix_set_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
 		netdev_dbg(net, "write to EEPROM at offset 0x%02x, data 0x%04x\n",
 			   i, eeprom_buff[i - first_word]);
 		ret = asix_write_cmd(dev, AX_CMD_WRITE_EEPROM, i,
-				     eeprom_buff[i - first_word], 0, NULL);
+				     eeprom_buff[i - first_word], 0, NULL, 0);
 		if (ret < 0) {
 			netdev_err(net, "Failed to write EEPROM at offset 0x%02x.\n",
 				   i);
@@ -570,7 +664,7 @@ int asix_set_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
 		msleep(20);
 	}
 
-	ret = asix_write_cmd(dev, AX_CMD_WRITE_DISABLE, 0x0000, 0, 0, NULL);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_DISABLE, 0x0000, 0, 0, NULL, 0);
 	if (ret < 0) {
 		netdev_err(net, "Failed to disable EEPROM write\n");
 		goto free;
diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
index 5cabefc..aaa4290 100644
--- a/drivers/net/usb/asix_devices.c
+++ b/drivers/net/usb/asix_devices.c
@@ -184,7 +184,7 @@ static int ax88172_link_reset(struct usbnet *dev)
 	netdev_dbg(dev->net, "ax88172_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n",
 		   ethtool_cmd_speed(&ecmd), ecmd.duplex, mode);
 
-	asix_write_medium_mode(dev, mode);
+	asix_write_medium_mode(dev, mode, 0);
 
 	return 0;
 }
@@ -213,18 +213,19 @@ static int ax88172_bind(struct usbnet *dev, struct usb_interface *intf)
 	/* Toggle the GPIOs in a manufacturer/model specific way */
 	for (i = 2; i >= 0; i--) {
 		ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS,
-				(gpio_bits >> (i * 8)) & 0xff, 0, 0, NULL);
+				(gpio_bits >> (i * 8)) & 0xff, 0, 0, NULL, 0);
 		if (ret < 0)
 			goto out;
 		msleep(5);
 	}
 
-	ret = asix_write_rx_ctl(dev, 0x80);
+	ret = asix_write_rx_ctl(dev, 0x80, 0);
 	if (ret < 0)
 		goto out;
 
 	/* Get the MAC address */
-	ret = asix_read_cmd(dev, AX88172_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf);
+	ret = asix_read_cmd(dev, AX88172_CMD_READ_NODE_ID,
+			    0, 0, ETH_ALEN, buf, 0);
 	if (ret < 0) {
 		netdev_dbg(dev->net, "read AX_CMD_READ_NODE_ID failed: %d\n",
 			   ret);
@@ -290,7 +291,7 @@ static int ax88772_link_reset(struct usbnet *dev)
 	netdev_dbg(dev->net, "ax88772_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n",
 		   ethtool_cmd_speed(&ecmd), ecmd.duplex, mode);
 
-	asix_write_medium_mode(dev, mode);
+	asix_write_medium_mode(dev, mode, 0);
 
 	return 0;
 }
@@ -298,78 +299,192 @@ static int ax88772_link_reset(struct usbnet *dev)
 static int ax88772_reset(struct usbnet *dev)
 {
 	struct asix_data *data = (struct asix_data *)&dev->data;
+	int ret;
+
+	/* Rewrite MAC address */
+	ether_addr_copy(data->mac_addr, dev->net->dev_addr);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0,
+			     ETH_ALEN, data->mac_addr, 0);
+	if (ret < 0)
+		goto out;
+
+	/* Set RX_CTL to default values with 2k buffer, and enable cactus */
+	ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, 0);
+	if (ret < 0)
+		goto out;
+
+	asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT, 0);
+	if (ret < 0)
+		goto out;
+
+	return 0;
+
+out:
+	return ret;
+}
+
+static int ax88772_hw_reset(struct usbnet *dev, int in_pm)
+{
+	struct asix_data *data = (struct asix_data *)&dev->data;
 	int ret, embd_phy;
 	u16 rx_ctl;
 
-	ret = asix_write_gpio(dev,
-			AX_GPIO_RSE | AX_GPIO_GPO_2 | AX_GPIO_GPO2EN, 5);
+	ret = asix_write_gpio(dev, AX_GPIO_RSE | AX_GPIO_GPO_2 |
+			      AX_GPIO_GPO2EN, 5, in_pm);
 	if (ret < 0)
 		goto out;
 
-	embd_phy = ((asix_get_phy_addr(dev) & 0x1f) == 0x10 ? 1 : 0);
+	embd_phy = ((dev->mii.phy_id & 0x1f) == 0x10 ? 1 : 0);
 
-	ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, embd_phy, 0, 0, NULL);
+	ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, embd_phy,
+			     0, 0, NULL, in_pm);
 	if (ret < 0) {
 		netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret);
 		goto out;
 	}
 
-	ret = asix_sw_reset(dev, AX_SWRESET_IPPD | AX_SWRESET_PRL);
-	if (ret < 0)
-		goto out;
+	if (embd_phy) {
+		ret = asix_sw_reset(dev, AX_SWRESET_IPPD, in_pm);
+		if (ret < 0)
+			goto out;
 
-	msleep(150);
+		usleep_range(10000, 11000);
 
-	ret = asix_sw_reset(dev, AX_SWRESET_CLEAR);
-	if (ret < 0)
-		goto out;
+		ret = asix_sw_reset(dev, AX_SWRESET_CLEAR, in_pm);
+		if (ret < 0)
+			goto out;
 
-	msleep(150);
+		msleep(60);
 
-	if (embd_phy) {
-		ret = asix_sw_reset(dev, AX_SWRESET_IPRL);
+		ret = asix_sw_reset(dev, AX_SWRESET_IPRL | AX_SWRESET_PRL,
+				    in_pm);
 		if (ret < 0)
 			goto out;
 	} else {
-		ret = asix_sw_reset(dev, AX_SWRESET_PRTE);
+		ret = asix_sw_reset(dev, AX_SWRESET_IPPD | AX_SWRESET_PRL,
+				    in_pm);
 		if (ret < 0)
 			goto out;
 	}
 
 	msleep(150);
-	rx_ctl = asix_read_rx_ctl(dev);
-	netdev_dbg(dev->net, "RX_CTL is 0x%04x after software reset\n", rx_ctl);
-	ret = asix_write_rx_ctl(dev, 0x0000);
+
+	if (in_pm && (!asix_mdio_read_nopm(dev->net, dev->mii.phy_id,
+					   MII_PHYSID1))){
+		ret = -EIO;
+		goto out;
+	}
+
+	ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, in_pm);
+	if (ret < 0)
+		goto out;
+
+	ret = asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT, in_pm);
 	if (ret < 0)
 		goto out;
 
-	rx_ctl = asix_read_rx_ctl(dev);
-	netdev_dbg(dev->net, "RX_CTL is 0x%04x setting to 0x0000\n", rx_ctl);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0,
+			     AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT,
+			     AX88772_IPG2_DEFAULT, 0, NULL, in_pm);
+	if (ret < 0) {
+		netdev_dbg(dev->net, "Write IPG,IPG1,IPG2 failed: %d\n", ret);
+		goto out;
+	}
 
-	ret = asix_sw_reset(dev, AX_SWRESET_PRL);
+	/* Rewrite MAC address */
+	ether_addr_copy(data->mac_addr, dev->net->dev_addr);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0,
+			     ETH_ALEN, data->mac_addr, in_pm);
 	if (ret < 0)
 		goto out;
 
-	msleep(150);
+	/* Set RX_CTL to default values with 2k buffer, and enable cactus */
+	ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, in_pm);
+	if (ret < 0)
+		goto out;
+
+	rx_ctl = asix_read_rx_ctl(dev, in_pm);
+	netdev_dbg(dev->net, "RX_CTL is 0x%04x after all initializations\n",
+		   rx_ctl);
+
+	rx_ctl = asix_read_medium_status(dev, in_pm);
+	netdev_dbg(dev->net,
+		   "Medium Status is 0x%04x after all initializations\n",
+		   rx_ctl);
+
+	return 0;
+
+out:
+	return ret;
+}
+
+static int ax88772a_hw_reset(struct usbnet *dev, int in_pm)
+{
+	struct asix_data *data = (struct asix_data *)&dev->data;
+	int ret, embd_phy;
+	u16 rx_ctl;
+	u8 chipcode = 0;
 
-	ret = asix_sw_reset(dev, AX_SWRESET_IPRL | AX_SWRESET_PRL);
+	ret = asix_write_gpio(dev, AX_GPIO_RSE, 5, in_pm);
 	if (ret < 0)
 		goto out;
 
-	msleep(150);
+	embd_phy = ((dev->mii.phy_id & 0x1f) == 0x10 ? 1 : 0);
 
-	asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
-	asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
-			ADVERTISE_ALL | ADVERTISE_CSMA);
-	mii_nway_restart(&dev->mii);
+	ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, embd_phy |
+			     AX_PHYSEL_SSEN, 0, 0, NULL, in_pm);
+	if (ret < 0) {
+		netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret);
+		goto out;
+	}
+	usleep_range(10000, 11000);
 
-	ret = asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT);
+	ret = asix_sw_reset(dev, AX_SWRESET_IPPD | AX_SWRESET_IPRL, in_pm);
 	if (ret < 0)
 		goto out;
 
+	usleep_range(10000, 11000);
+
+	ret = asix_sw_reset(dev, AX_SWRESET_IPRL, in_pm);
+	if (ret < 0)
+		goto out;
+
+	msleep(160);
+
+	ret = asix_sw_reset(dev, AX_SWRESET_CLEAR, in_pm);
+	if (ret < 0)
+		goto out;
+
+	ret = asix_sw_reset(dev, AX_SWRESET_IPRL, in_pm);
+	if (ret < 0)
+		goto out;
+
+	msleep(200);
+
+	if (in_pm && (!asix_mdio_read_nopm(dev->net, dev->mii.phy_id,
+					   MII_PHYSID1))) {
+		ret = -1;
+		goto out;
+	}
+
+	ret = asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0,
+			    0, 1, &chipcode, in_pm);
+	if (ret < 0)
+		goto out;
+
+	if ((chipcode & AX_CHIPCODE_MASK) == AX_AX88772B_CHIPCODE) {
+		ret = asix_write_cmd(dev, AX_QCTCTRL, 0x8000, 0x8001,
+				     0, NULL, in_pm);
+		if (ret < 0) {
+			netdev_dbg(dev->net, "Write BQ setting failed: %d\n",
+				   ret);
+			goto out;
+		}
+	}
+
 	ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0,
 				AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT,
-				AX88772_IPG2_DEFAULT, 0, NULL);
+				AX88772_IPG2_DEFAULT, 0, NULL, in_pm);
 	if (ret < 0) {
 		netdev_dbg(dev->net, "Write IPG,IPG1,IPG2 failed: %d\n", ret);
 		goto out;
@@ -378,20 +493,29 @@ static int ax88772_reset(struct usbnet *dev)
 	/* Rewrite MAC address */
 	memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN);
 	ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
-							data->mac_addr);
+							data->mac_addr, in_pm);
+	if (ret < 0)
+		goto out;
+
+	/* Set RX_CTL to default values with 2k buffer, and enable cactus */
+	ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, in_pm);
 	if (ret < 0)
 		goto out;
 
+	ret = asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT, in_pm);
+	if (ret < 0)
+		return ret;
+
 	/* Set RX_CTL to default values with 2k buffer, and enable cactus */
-	ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL);
+	ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, in_pm);
 	if (ret < 0)
 		goto out;
 
-	rx_ctl = asix_read_rx_ctl(dev);
+	rx_ctl = asix_read_rx_ctl(dev, in_pm);
 	netdev_dbg(dev->net, "RX_CTL is 0x%04x after all initializations\n",
 		   rx_ctl);
 
-	rx_ctl = asix_read_medium_status(dev);
+	rx_ctl = asix_read_medium_status(dev, in_pm);
 	netdev_dbg(dev->net,
 		   "Medium Status is 0x%04x after all initializations\n",
 		   rx_ctl);
@@ -400,7 +524,6 @@ static int ax88772_reset(struct usbnet *dev)
 
 out:
 	return ret;
-
 }
 
 static const struct net_device_ops ax88772_netdev_ops = {
@@ -415,11 +538,87 @@ static const struct net_device_ops ax88772_netdev_ops = {
 	.ndo_set_rx_mode        = asix_set_multicast,
 };
 
+static void ax88772_suspend(struct usbnet *dev)
+{
+	struct asix_common_private *priv = dev->driver_priv;
+
+	/* Preserve BMCR for restoring */
+	priv->presvd_phy_bmcr =
+		asix_mdio_read_nopm(dev->net, dev->mii.phy_id, MII_BMCR);
+
+	/* Preserve ANAR for restoring */
+	priv->presvd_phy_advertise =
+		asix_mdio_read_nopm(dev->net, dev->mii.phy_id, MII_ADVERTISE);
+}
+
+static int asix_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	struct usbnet *dev = usb_get_intfdata(intf);
+	struct asix_common_private *priv = dev->driver_priv;
+
+	if (priv->suspend)
+		priv->suspend(dev);
+
+	return usbnet_suspend(intf, message);
+}
+
+static void ax88772_restore_phy(struct usbnet *dev)
+{
+	struct asix_common_private *priv = dev->driver_priv;
+
+	if (priv->presvd_phy_advertise) {
+		/* Restore Advertisement control reg */
+		asix_mdio_write_nopm(dev->net, dev->mii.phy_id, MII_ADVERTISE,
+				     priv->presvd_phy_advertise);
+
+		/* Restore BMCR */
+		asix_mdio_write_nopm(dev->net, dev->mii.phy_id, MII_BMCR,
+				     priv->presvd_phy_bmcr);
+
+		priv->presvd_phy_advertise = 0;
+		priv->presvd_phy_bmcr = 0;
+	}
+}
+
+static void ax88772_resume(struct usbnet *dev)
+{
+	int i;
+
+	for (i = 0; i < 3; i++)
+		if (!ax88772_hw_reset(dev, 1))
+			break;
+	ax88772_restore_phy(dev);
+}
+
+static void ax88772a_resume(struct usbnet *dev)
+{
+	int i;
+
+	for (i = 0; i < 3; i++) {
+		if (!ax88772a_hw_reset(dev, 1))
+			break;
+	}
+
+	ax88772_restore_phy(dev);
+}
+
+static int asix_resume(struct usb_interface *intf)
+{
+	struct usbnet *dev = usb_get_intfdata(intf);
+	struct asix_common_private *priv = dev->driver_priv;
+
+	if (priv->resume)
+		priv->resume(dev);
+
+	return usbnet_resume(intf);
+}
+
 static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
 {
-	int ret, embd_phy, i;
-	u8 buf[ETH_ALEN];
+	int ret, i;
+	u8 buf[ETH_ALEN], chipcode = 0;
 	u32 phyid;
+	struct asix_common_private *priv;
 
 	usbnet_get_endpoints(dev,intf);
 
@@ -427,13 +626,13 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
 	if (dev->driver_info->data & FLAG_EEPROM_MAC) {
 		for (i = 0; i < (ETH_ALEN >> 1); i++) {
 			ret = asix_read_cmd(dev, AX_CMD_READ_EEPROM, 0x04 + i,
-					0, 2, buf + i * 2);
+					    0, 2, buf + i * 2, 0);
 			if (ret < 0)
 				break;
 		}
 	} else {
 		ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID,
-				0, 0, ETH_ALEN, buf);
+				0, 0, ETH_ALEN, buf, 0);
 	}
 
 	if (ret < 0) {
@@ -456,16 +655,11 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
 	dev->net->needed_headroom = 4; /* cf asix_tx_fixup() */
 	dev->net->needed_tailroom = 4; /* cf asix_tx_fixup() */
 
-	embd_phy = ((dev->mii.phy_id & 0x1f) == 0x10 ? 1 : 0);
+	asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1, &chipcode, 0);
+	chipcode &= AX_CHIPCODE_MASK;
 
-	/* Reset the PHY to normal operation mode */
-	ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, embd_phy, 0, 0, NULL);
-	if (ret < 0) {
-		netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret);
-		return ret;
-	}
-
-	ax88772_reset(dev);
+	(chipcode == AX_AX88772_CHIPCODE) ? ax88772_hw_reset(dev, 0) :
+					    ax88772a_hw_reset(dev, 0);
 
 	/* Read PHYID register *AFTER* the PHY was reset properly */
 	phyid = asix_get_phyid(dev);
@@ -482,6 +676,18 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
 	if (!dev->driver_priv)
 		return -ENOMEM;
 
+	priv = dev->driver_priv;
+
+	priv->presvd_phy_bmcr = 0;
+	priv->presvd_phy_advertise = 0;
+	if (chipcode == AX_AX88772_CHIPCODE) {
+		priv->resume = ax88772_resume;
+		priv->suspend = ax88772_suspend;
+	} else {
+		priv->resume = ax88772a_resume;
+		priv->suspend = ax88772_suspend;
+	}
+
 	return 0;
 }
 
@@ -593,12 +799,12 @@ static int ax88178_reset(struct usbnet *dev)
 	int gpio0 = 0;
 	u32 phyid;
 
-	asix_read_cmd(dev, AX_CMD_READ_GPIOS, 0, 0, 1, &status);
+	asix_read_cmd(dev, AX_CMD_READ_GPIOS, 0, 0, 1, &status, 0);
 	netdev_dbg(dev->net, "GPIO Status: 0x%04x\n", status);
 
-	asix_write_cmd(dev, AX_CMD_WRITE_ENABLE, 0, 0, 0, NULL);
-	asix_read_cmd(dev, AX_CMD_READ_EEPROM, 0x0017, 0, 2, &eeprom);
-	asix_write_cmd(dev, AX_CMD_WRITE_DISABLE, 0, 0, 0, NULL);
+	asix_write_cmd(dev, AX_CMD_WRITE_ENABLE, 0, 0, 0, NULL, 0);
+	asix_read_cmd(dev, AX_CMD_READ_EEPROM, 0x0017, 0, 2, &eeprom, 0);
+	asix_write_cmd(dev, AX_CMD_WRITE_DISABLE, 0, 0, 0, NULL, 0);
 
 	netdev_dbg(dev->net, "EEPROM index 0x17 is 0x%04x\n", eeprom);
 
@@ -614,15 +820,16 @@ static int ax88178_reset(struct usbnet *dev)
 	netdev_dbg(dev->net, "GPIO0: %d, PhyMode: %d\n", gpio0, data->phymode);
 
 	/* Power up external GigaPHY through AX88178 GPIO pin */
-	asix_write_gpio(dev, AX_GPIO_RSE | AX_GPIO_GPO_1 | AX_GPIO_GPO1EN, 40);
+	asix_write_gpio(dev, AX_GPIO_RSE | AX_GPIO_GPO_1 |
+			AX_GPIO_GPO1EN, 40, 0);
 	if ((le16_to_cpu(eeprom) >> 8) != 1) {
-		asix_write_gpio(dev, 0x003c, 30);
-		asix_write_gpio(dev, 0x001c, 300);
-		asix_write_gpio(dev, 0x003c, 30);
+		asix_write_gpio(dev, 0x003c, 30, 0);
+		asix_write_gpio(dev, 0x001c, 300, 0);
+		asix_write_gpio(dev, 0x003c, 30, 0);
 	} else {
 		netdev_dbg(dev->net, "gpio phymode == 1 path\n");
-		asix_write_gpio(dev, AX_GPIO_GPO1EN, 30);
-		asix_write_gpio(dev, AX_GPIO_GPO1EN | AX_GPIO_GPO_1, 30);
+		asix_write_gpio(dev, AX_GPIO_GPO1EN, 30, 0);
+		asix_write_gpio(dev, AX_GPIO_GPO1EN | AX_GPIO_GPO_1, 30, 0);
 	}
 
 	/* Read PHYID register *AFTER* powering up PHY */
@@ -630,15 +837,15 @@ static int ax88178_reset(struct usbnet *dev)
 	netdev_dbg(dev->net, "PHYID=0x%08x\n", phyid);
 
 	/* Set AX88178 to enable MII/GMII/RGMII interface for external PHY */
-	asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, 0, 0, 0, NULL);
+	asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, 0, 0, 0, NULL, 0);
 
-	asix_sw_reset(dev, 0);
+	asix_sw_reset(dev, 0, 0);
 	msleep(150);
 
-	asix_sw_reset(dev, AX_SWRESET_PRL | AX_SWRESET_IPPD);
+	asix_sw_reset(dev, AX_SWRESET_PRL | AX_SWRESET_IPPD, 0);
 	msleep(150);
 
-	asix_write_rx_ctl(dev, 0);
+	asix_write_rx_ctl(dev, 0, 0);
 
 	if (data->phymode == PHY_MODE_MARVELL) {
 		marvell_phy_init(dev);
@@ -655,18 +862,18 @@ static int ax88178_reset(struct usbnet *dev)
 
 	mii_nway_restart(&dev->mii);
 
-	ret = asix_write_medium_mode(dev, AX88178_MEDIUM_DEFAULT);
+	ret = asix_write_medium_mode(dev, AX88178_MEDIUM_DEFAULT, 0);
 	if (ret < 0)
 		return ret;
 
 	/* Rewrite MAC address */
 	memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN);
 	ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
-							data->mac_addr);
+							data->mac_addr, 0);
 	if (ret < 0)
 		return ret;
 
-	ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL);
+	ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, 0);
 	if (ret < 0)
 		return ret;
 
@@ -704,7 +911,7 @@ static int ax88178_link_reset(struct usbnet *dev)
 	netdev_dbg(dev->net, "ax88178_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n",
 		   speed, ecmd.duplex, mode);
 
-	asix_write_medium_mode(dev, mode);
+	asix_write_medium_mode(dev, mode, 0);
 
 	if (data->phymode == PHY_MODE_MARVELL && data->ledmode)
 		marvell_led_status(dev, speed);
@@ -733,15 +940,15 @@ static void ax88178_set_mfb(struct usbnet *dev)
 		mfb = AX_RX_CTL_MFB_16384;
 	}
 
-	rxctl = asix_read_rx_ctl(dev);
-	asix_write_rx_ctl(dev, (rxctl & ~AX_RX_CTL_MFB_16384) | mfb);
+	rxctl = asix_read_rx_ctl(dev, 0);
+	asix_write_rx_ctl(dev, (rxctl & ~AX_RX_CTL_MFB_16384) | mfb, 0);
 
-	medium = asix_read_medium_status(dev);
+	medium = asix_read_medium_status(dev, 0);
 	if (dev->net->mtu > 1500)
 		medium |= AX_MEDIUM_JFE;
 	else
 		medium &= ~AX_MEDIUM_JFE;
-	asix_write_medium_mode(dev, medium);
+	asix_write_medium_mode(dev, medium, 0);
 
 	if (dev->rx_urb_size > old_rx_urb_size)
 		usbnet_unlink_rx_urbs(dev);
@@ -790,7 +997,7 @@ static int ax88178_bind(struct usbnet *dev, struct usb_interface *intf)
 	usbnet_get_endpoints(dev,intf);
 
 	/* Get the MAC address */
-	ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf);
+	ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf, 0);
 	if (ret < 0) {
 		netdev_dbg(dev->net, "Failed to read MAC address: %d\n", ret);
 		return ret;
@@ -811,10 +1018,10 @@ static int ax88178_bind(struct usbnet *dev, struct usb_interface *intf)
 	dev->net->ethtool_ops = &ax88178_ethtool_ops;
 
 	/* Blink LEDS so users know driver saw dongle */
-	asix_sw_reset(dev, 0);
+	asix_sw_reset(dev, 0, 0);
 	msleep(150);
 
-	asix_sw_reset(dev, AX_SWRESET_PRL | AX_SWRESET_IPPD);
+	asix_sw_reset(dev, AX_SWRESET_PRL | AX_SWRESET_IPPD, 0);
 	msleep(150);
 
 	/* Asix framing packs multiple eth frames into a 2K usb bulk transfer */
@@ -877,7 +1084,7 @@ static const struct driver_info ax88772_info = {
 	.unbind = ax88772_unbind,
 	.status = asix_status,
 	.link_reset = ax88772_link_reset,
-	.reset = ax88772_link_reset,
+	.reset = ax88772_reset,
 	.flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR | FLAG_MULTI_PACKET,
 	.rx_fixup = asix_rx_fixup_common,
 	.tx_fixup = asix_tx_fixup,
@@ -1005,7 +1212,7 @@ static const struct usb_device_id	products [] = {
 }, {
 	// Lenovo U2L100P 10/100
 	USB_DEVICE (0x17ef, 0x7203),
-	.driver_info = (unsigned long) &ax88772_info,
+	.driver_info = (unsigned long)&ax88772b_info,
 }, {
 	// ASIX AX88772B 10/100
 	USB_DEVICE (0x0b95, 0x772b),
@@ -1073,7 +1280,7 @@ static const struct usb_device_id	products [] = {
 }, {
 	// Asus USB Ethernet Adapter
 	USB_DEVICE (0x0b95, 0x7e2b),
-	.driver_info = (unsigned long) &ax88772_info,
+	.driver_info = (unsigned long)&ax88772b_info,
 }, {
 	/* ASIX 88172a demo board */
 	USB_DEVICE(0x0b95, 0x172a),
@@ -1095,8 +1302,8 @@ static struct usb_driver asix_driver = {
 	.name =		DRIVER_NAME,
 	.id_table =	products,
 	.probe =	usbnet_probe,
-	.suspend =	usbnet_suspend,
-	.resume =	usbnet_resume,
+	.suspend =	asix_suspend,
+	.resume =	asix_resume,
 	.disconnect =	usbnet_disconnect,
 	.supports_autosuspend = 1,
 	.disable_hub_initiated_lpm = 1,
diff --git a/drivers/net/usb/ax88172a.c b/drivers/net/usb/ax88172a.c
index 163a2c5..49a3bc1 100644
--- a/drivers/net/usb/ax88172a.c
+++ b/drivers/net/usb/ax88172a.c
@@ -81,7 +81,7 @@ static void ax88172a_adjust_link(struct net_device *netdev)
 	}
 
 	if (mode != priv->oldmode) {
-		asix_write_medium_mode(dev, mode);
+		asix_write_medium_mode(dev, mode, 0);
 		priv->oldmode = mode;
 		netdev_dbg(netdev, "speed %u duplex %d, setting mode to 0x%04x\n",
 			   phydev->speed, phydev->duplex, mode);
@@ -176,18 +176,19 @@ static int ax88172a_reset_phy(struct usbnet *dev, int embd_phy)
 {
 	int ret;
 
-	ret = asix_sw_reset(dev, AX_SWRESET_IPPD);
+	ret = asix_sw_reset(dev, AX_SWRESET_IPPD, 0);
 	if (ret < 0)
 		goto err;
 
 	msleep(150);
-	ret = asix_sw_reset(dev, AX_SWRESET_CLEAR);
+	ret = asix_sw_reset(dev, AX_SWRESET_CLEAR, 0);
 	if (ret < 0)
 		goto err;
 
 	msleep(150);
 
-	ret = asix_sw_reset(dev, embd_phy ? AX_SWRESET_IPRL : AX_SWRESET_IPPD);
+	ret = asix_sw_reset(dev, embd_phy ? AX_SWRESET_IPRL : AX_SWRESET_IPPD,
+			    0);
 	if (ret < 0)
 		goto err;
 
@@ -213,7 +214,7 @@ static int ax88172a_bind(struct usbnet *dev, struct usb_interface *intf)
 	dev->driver_priv = priv;
 
 	/* Get the MAC address */
-	ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf);
+	ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf, 0);
 	if (ret < 0) {
 		netdev_err(dev->net, "Failed to read MAC address: %d\n", ret);
 		goto free;
@@ -224,7 +225,7 @@ static int ax88172a_bind(struct usbnet *dev, struct usb_interface *intf)
 	dev->net->ethtool_ops = &ax88172a_ethtool_ops;
 
 	/* are we using the internal or the external phy? */
-	ret = asix_read_cmd(dev, AX_CMD_SW_PHY_STATUS, 0, 0, 1, buf);
+	ret = asix_read_cmd(dev, AX_CMD_SW_PHY_STATUS, 0, 0, 1, buf, 0);
 	if (ret < 0) {
 		netdev_err(dev->net, "Failed to read software interface selection register: %d\n",
 			   ret);
@@ -303,20 +304,20 @@ static int ax88172a_reset(struct usbnet *dev)
 	ax88172a_reset_phy(dev, priv->use_embdphy);
 
 	msleep(150);
-	rx_ctl = asix_read_rx_ctl(dev);
+	rx_ctl = asix_read_rx_ctl(dev, 0);
 	netdev_dbg(dev->net, "RX_CTL is 0x%04x after software reset\n", rx_ctl);
-	ret = asix_write_rx_ctl(dev, 0x0000);
+	ret = asix_write_rx_ctl(dev, 0x0000, 0);
 	if (ret < 0)
 		goto out;
 
-	rx_ctl = asix_read_rx_ctl(dev);
+	rx_ctl = asix_read_rx_ctl(dev, 0);
 	netdev_dbg(dev->net, "RX_CTL is 0x%04x setting to 0x0000\n", rx_ctl);
 
 	msleep(150);
 
 	ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0,
 			     AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT,
-			     AX88772_IPG2_DEFAULT, 0, NULL);
+			     AX88772_IPG2_DEFAULT, 0, NULL, 0);
 	if (ret < 0) {
 		netdev_err(dev->net, "Write IPG,IPG1,IPG2 failed: %d\n", ret);
 		goto out;
@@ -325,20 +326,20 @@ static int ax88172a_reset(struct usbnet *dev)
 	/* Rewrite MAC address */
 	memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN);
 	ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
-			     data->mac_addr);
+			     data->mac_addr, 0);
 	if (ret < 0)
 		goto out;
 
 	/* Set RX_CTL to default values with 2k buffer, and enable cactus */
-	ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL);
+	ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, 0);
 	if (ret < 0)
 		goto out;
 
-	rx_ctl = asix_read_rx_ctl(dev);
+	rx_ctl = asix_read_rx_ctl(dev, 0);
 	netdev_dbg(dev->net, "RX_CTL is 0x%04x after all initializations\n",
 		   rx_ctl);
 
-	rx_ctl = asix_read_medium_status(dev);
+	rx_ctl = asix_read_medium_status(dev, 0);
 	netdev_dbg(dev->net, "Medium Status is 0x%04x after all initializations\n",
 		   rx_ctl);
 
-- 
git-series 0.8.10

[PATCH v3 2/5] net: asix: Avoid looping when the device is disconnected

[robert.foss]

From: Robert Foss <robert.foss@collabora.com>

From: Vincent Palatin <vpalatin@chromium.org>

Check the answers from the USB stack and avoid re-sending multiple times
the request if the device has disappeared.

Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Signed-off-by: Robert Foss <robert.foss@collabora.com>
Tested-by: Robert Foss <robert.foss@collabora.com>
---
 drivers/net/usb/asix_common.c  | 56 +++++++++++++++++++++++++++--------
 drivers/net/usb/asix_devices.c |  2 +-
 2 files changed, 46 insertions(+), 12 deletions(-)

diff --git a/drivers/net/usb/asix_common.c b/drivers/net/usb/asix_common.c
index 25609ee..f79eb12 100644
--- a/drivers/net/usb/asix_common.c
+++ b/drivers/net/usb/asix_common.c
@@ -428,13 +428,21 @@ int asix_mdio_read(struct net_device *netdev, int phy_id, int loc)
 	__le16 res;
 	u8 smsr;
 	int i = 0;
+	int ret;
 
 	mutex_lock(&dev->phy_mutex);
 	do {
-		asix_set_sw_mii(dev, 0);
+		ret = asix_set_sw_mii(dev, 0);
+		if (ret == -ENODEV)
+			break;
 		usleep_range(1000, 1100);
-		asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1, &smsr, 0);
-	} while (!(smsr & AX_HOST_EN) && (i++ < 30));
+		ret = asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG,
+				    0, 0, 1, &smsr, 0);
+	} while (!(smsr & AX_HOST_EN) && (i++ < 30) && (ret != -ENODEV));
+	if (ret == -ENODEV) {
+		mutex_unlock(&dev->phy_mutex);
+		return ret;
+	}
 
 	asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id,
 				(__u16)loc, 2, &res, 0);
@@ -453,16 +461,24 @@ void asix_mdio_write(struct net_device *netdev, int phy_id, int loc, int val)
 	__le16 res = cpu_to_le16(val);
 	u8 smsr;
 	int i = 0;
+	int ret;
 
 	netdev_dbg(dev->net, "asix_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n",
 			phy_id, loc, val);
 
 	mutex_lock(&dev->phy_mutex);
 	do {
-		asix_set_sw_mii(dev, 0);
+		ret = asix_set_sw_mii(dev, 0);
+		if (ret == -ENODEV)
+			break;
 		usleep_range(1000, 1100);
-		asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1, &smsr, 0);
-	} while (!(smsr & AX_HOST_EN) && (i++ < 30));
+		ret = asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG,
+				    0, 0, 1, &smsr, 0);
+	} while (!(smsr & AX_HOST_EN) && (i++ < 30) && (ret != -ENODEV));
+	if (ret == -ENODEV) {
+		mutex_unlock(&dev->phy_mutex);
+		return;
+	}
 
 	asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id,
 		       (__u16)loc, 2, &res, 0);
@@ -476,13 +492,21 @@ int asix_mdio_read_nopm(struct net_device *netdev, int phy_id, int loc)
 	__le16 res;
 	u8 smsr;
 	int i = 0;
+	int ret;
 
 	mutex_lock(&dev->phy_mutex);
 	do {
-		asix_set_sw_mii(dev, 1);
+		ret = asix_set_sw_mii(dev, 1);
+		if (ret == -ENODEV)
+			break;
 		usleep_range(1000, 1100);
-		asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1, &smsr, 1);
-	} while (!(smsr & AX_HOST_EN) && (i++ < 30));
+		ret = asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG,
+				    0, 0, 1, &smsr, 1);
+	} while (!(smsr & AX_HOST_EN) && (i++ < 30) && (ret != -ENODEV));
+	if (ret == -ENODEV) {
+		mutex_unlock(&dev->phy_mutex);
+		return ret;
+	}
 
 	asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id,
 		      (__u16)loc, 2, &res, 1);
@@ -502,16 +526,24 @@ asix_mdio_write_nopm(struct net_device *netdev, int phy_id, int loc, int val)
 	__le16 res = cpu_to_le16(val);
 	u8 smsr;
 	int i = 0;
+	int ret;
 
 	netdev_dbg(dev->net, "asix_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n",
 			phy_id, loc, val);
 
 	mutex_lock(&dev->phy_mutex);
 	do {
-		asix_set_sw_mii(dev, 1);
+		ret = asix_set_sw_mii(dev, 1);
+		if (ret == -ENODEV)
+			break;
 		usleep_range(1000, 1100);
-		asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1, &smsr, 1);
-	} while (!(smsr & AX_HOST_EN) && (i++ < 30));
+		ret = asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG,
+				    0, 0, 1, &smsr, 1);
+	} while (!(smsr & AX_HOST_EN) && (i++ < 30) && (ret != -ENODEV));
+	if (ret == -ENODEV) {
+		mutex_unlock(&dev->phy_mutex);
+		return;
+	}
 
 	asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id,
 		       (__u16)loc, 2, &res, 1);
diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
index aaa4290..ebeb730 100644
--- a/drivers/net/usb/asix_devices.c
+++ b/drivers/net/usb/asix_devices.c
@@ -79,6 +79,8 @@ static u32 asix_get_phyid(struct usbnet *dev)
 	/* Poll for the rare case the FW or phy isn't ready yet.  */
 	for (i = 0; i < 100; i++) {
 		phy_reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID1);
+		if (phy_reg < 0)
+			return 0;
 		if (phy_reg != 0 && phy_reg != 0xFFFF)
 			break;
 		mdelay(1);
-- 
git-series 0.8.10

[PATCH v3 3/5] net: asix: Fix AX88772x resume failures

[robert.foss]

From: Robert Foss <robert.foss@collabora.com>

From: Allan Chou <allan@asix.com.tw>

The change fixes AX88772x resume failure by
- Restore incorrect AX88772A PHY registers when resetting
- Need to stop MAC operation when suspending
- Need to restart MII when restoring PHY

Signed-off-by: Allan Chou <allan@asix.com.tw>
Signed-off-by: Robert Foss <robert.foss@collabora.com>
Tested-by: Robert Foss <robert.foss@collabora.com>
---
 drivers/net/usb/asix_devices.c | 47 ++++++++++++++++++++++++++++++++++-
 1 file changed, 46 insertions(+), 1 deletion(-)

diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
index ebeb730..083dc2e 100644
--- a/drivers/net/usb/asix_devices.c
+++ b/drivers/net/usb/asix_devices.c
@@ -35,6 +35,15 @@
 
 #define	PHY_MODE_RTL8211CL	0x000C
 
+#define AX88772A_PHY14H		0x14
+#define AX88772A_PHY14H_DEFAULT 0x442C
+
+#define AX88772A_PHY15H		0x15
+#define AX88772A_PHY15H_DEFAULT 0x03C8
+
+#define AX88772A_PHY16H		0x16
+#define AX88772A_PHY16H_DEFAULT 0x4044
+
 struct ax88172_int_data {
 	__le16 res1;
 	u8 link;
@@ -424,7 +433,7 @@ static int ax88772a_hw_reset(struct usbnet *dev, int in_pm)
 {
 	struct asix_data *data = (struct asix_data *)&dev->data;
 	int ret, embd_phy;
-	u16 rx_ctl;
+	u16 rx_ctl, phy14h, phy15h, phy16h;
 	u8 chipcode = 0;
 
 	ret = asix_write_gpio(dev, AX_GPIO_RSE, 5, in_pm);
@@ -482,6 +491,32 @@ static int ax88772a_hw_reset(struct usbnet *dev, int in_pm)
 				   ret);
 			goto out;
 		}
+	} else if ((chipcode & AX_CHIPCODE_MASK) == AX_AX88772A_CHIPCODE) {
+		/* Check if the PHY registers have default settings */
+		phy14h = asix_mdio_read_nopm(dev->net, dev->mii.phy_id,
+					     AX88772A_PHY14H);
+		phy15h = asix_mdio_read_nopm(dev->net, dev->mii.phy_id,
+					     AX88772A_PHY15H);
+		phy16h = asix_mdio_read_nopm(dev->net, dev->mii.phy_id,
+					     AX88772A_PHY16H);
+
+		netdev_dbg(dev->net,
+			   "772a_hw_reset: MR20=0x%x MR21=0x%x MR22=0x%x\n",
+			   phy14h, phy15h, phy16h);
+
+		/* Restore PHY registers default setting if not */
+		if (phy14h != AX88772A_PHY14H_DEFAULT)
+			asix_mdio_write_nopm(dev->net, dev->mii.phy_id,
+					     AX88772A_PHY14H,
+					     AX88772A_PHY14H_DEFAULT);
+		if (phy15h != AX88772A_PHY15H_DEFAULT)
+			asix_mdio_write_nopm(dev->net, dev->mii.phy_id,
+					     AX88772A_PHY15H,
+					     AX88772A_PHY15H_DEFAULT);
+		if (phy16h != AX88772A_PHY16H_DEFAULT)
+			asix_mdio_write_nopm(dev->net, dev->mii.phy_id,
+					     AX88772A_PHY16H,
+					     AX88772A_PHY16H_DEFAULT);
 	}
 
 	ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0,
@@ -543,6 +578,15 @@ static const struct net_device_ops ax88772_netdev_ops = {
 static void ax88772_suspend(struct usbnet *dev)
 {
 	struct asix_common_private *priv = dev->driver_priv;
+	u16 medium;
+
+	/* Stop MAC operation */
+	medium = asix_read_medium_status(dev, 0);
+	medium &= ~AX_MEDIUM_RE;
+	asix_write_medium_mode(dev, medium, 0);
+
+	netdev_dbg(dev->net, "ax88772_suspend: medium=0x%04x\n",
+		   asix_read_medium_status(dev, 0));
 
 	/* Preserve BMCR for restoring */
 	priv->presvd_phy_bmcr =
@@ -577,6 +621,7 @@ static void ax88772_restore_phy(struct usbnet *dev)
 		asix_mdio_write_nopm(dev->net, dev->mii.phy_id, MII_BMCR,
 				     priv->presvd_phy_bmcr);
 
+		mii_nway_restart(&dev->mii);
 		priv->presvd_phy_advertise = 0;
 		priv->presvd_phy_bmcr = 0;
 	}
-- 
git-series 0.8.10

Re: [PATCH v3 3/5] net: asix: Fix AX88772x resume failures

[Jon Hunter]

Hi Robert,

On 29/08/16 14:32, robert.foss@collabora.com wrote:
> From: Robert Foss <robert.foss@collabora.com>
> 
> From: Allan Chou <allan@asix.com.tw>
> 
> The change fixes AX88772x resume failure by
> - Restore incorrect AX88772A PHY registers when resetting
> - Need to stop MAC operation when suspending
> - Need to restart MII when restoring PHY
> 
> Signed-off-by: Allan Chou <allan@asix.com.tw>
> Signed-off-by: Robert Foss <robert.foss@collabora.com>
> Tested-by: Robert Foss <robert.foss@collabora.com>

After this commit, I have started seeing the following messages
during system suspend on various tegra boards using asix ethernet
dongles ...

[  288.667010] PM: Syncing filesystems ... done.
[  288.672223] Freezing user space processes ... (elapsed 0.001 seconds) done.
[  288.680505] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) 
[  288.690193] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[  288.698987] Suspending console(s) (use no_console_suspend to debug)
[  288.706605] asix 1-1:1.0 eth0: Failed to read reg index 0x0000: -19
[  288.706613] asix 1-1:1.0 eth0: Error reading Medium Status register: ffffffed
[  288.706621] asix 1-1:1.0 eth0: Failed to write reg index 0x0000: -19
[  288.706629] asix 1-1:1.0 eth0: Failed to write Medium Mode mode to 0xfeed: ffffffed
[  288.759167] PM: suspend of devices complete after 52.772 msecs

Interestingly, it only seems to happen if the ethernet is in a
disconnected state when entering suspend. I have not had chance
to look at this any further, but wanted to see if you had any
thoughts.

Cheers
Jon

-- 
nvpublic

Re: [PATCH v3 3/5] net: asix: Fix AX88772x resume failures

[Jon Hunter]

Hi Robert,

On 29/08/16 14:32, robert.foss-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org wrote:
> From: Robert Foss <robert.foss-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>
> 
> From: Allan Chou <allan-knRN6Y/kmf1NUHwG+Fw1Kw@public.gmane.org>
> 
> The change fixes AX88772x resume failure by
> - Restore incorrect AX88772A PHY registers when resetting
> - Need to stop MAC operation when suspending
> - Need to restart MII when restoring PHY
> 
> Signed-off-by: Allan Chou <allan-knRN6Y/kmf1NUHwG+Fw1Kw@public.gmane.org>
> Signed-off-by: Robert Foss <robert.foss-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>
> Tested-by: Robert Foss <robert.foss-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>

After this commit, I have started seeing the following messages
during system suspend on various tegra boards using asix ethernet
dongles ...

[  288.667010] PM: Syncing filesystems ... done.
[  288.672223] Freezing user space processes ... (elapsed 0.001 seconds) done.
[  288.680505] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) 
[  288.690193] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[  288.698987] Suspending console(s) (use no_console_suspend to debug)
[  288.706605] asix 1-1:1.0 eth0: Failed to read reg index 0x0000: -19
[  288.706613] asix 1-1:1.0 eth0: Error reading Medium Status register: ffffffed
[  288.706621] asix 1-1:1.0 eth0: Failed to write reg index 0x0000: -19
[  288.706629] asix 1-1:1.0 eth0: Failed to write Medium Mode mode to 0xfeed: ffffffed
[  288.759167] PM: suspend of devices complete after 52.772 msecs

Interestingly, it only seems to happen if the ethernet is in a
disconnected state when entering suspend. I have not had chance
to look at this any further, but wanted to see if you had any
thoughts.

Cheers
Jon

-- 
nvpublic
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

RE: [PATCH v3 3/5] net: asix: Fix AX88772x resume failures

[ASIX_Allan [Home]]

Hi Jon,

It seems the AX88772x dongle had been unexpectedly removed while running the
ax88772_suspend() routine. If yes, you might see these error messages
because the hardware had been absent.    

---
Best regards,
Allan Chou


-----Original Message-----
From: Jon Hunter [mailto:jonathanh@nvidia.com] 
Sent: Thursday, November 10, 2016 8:01 PM
To: robert.foss@collabora.com; freddy@asix.com.tw; Dean_Jenkins@mentor.com;
Mark_Craske@mentor.com; davem@davemloft.net; ivecera@redhat.com;
john.stultz@linaro.org; vpalatin@chromium.org; stephen@networkplumber.org;
grundler@chromium.org; changchias@gmail.com; allan@asix.com.tw;
andrew@lunn.ch; tremyfr@gmail.com; colin.king@canonical.com;
linux-usb@vger.kernel.org; netdev@vger.kernel.org;
linux-kernel@vger.kernel.org; vpalatin@google.com
Subject: Re: [PATCH v3 3/5] net: asix: Fix AX88772x resume failures

Hi Robert,

On 29/08/16 14:32, robert.foss@collabora.com wrote:
> From: Robert Foss <robert.foss@collabora.com>
> 
> From: Allan Chou <allan@asix.com.tw>
> 
> The change fixes AX88772x resume failure by
> - Restore incorrect AX88772A PHY registers when resetting
> - Need to stop MAC operation when suspending
> - Need to restart MII when restoring PHY
> 
> Signed-off-by: Allan Chou <allan@asix.com.tw>
> Signed-off-by: Robert Foss <robert.foss@collabora.com>
> Tested-by: Robert Foss <robert.foss@collabora.com>

After this commit, I have started seeing the following messages during
system suspend on various tegra boards using asix ethernet dongles ...

[  288.667010] PM: Syncing filesystems ... done.
[  288.672223] Freezing user space processes ... (elapsed 0.001 seconds)
done.
[  288.680505] Double checking all user space processes after OOM killer
disable... (elapsed 0.000 seconds) [  288.690193] Freezing remaining
freezable tasks ... (elapsed 0.001 seconds) done.
[  288.698987] Suspending console(s) (use no_console_suspend to debug) [
288.706605] asix 1-1:1.0 eth0: Failed to read reg index 0x0000: -19 [
288.706613] asix 1-1:1.0 eth0: Error reading Medium Status register:
ffffffed [  288.706621] asix 1-1:1.0 eth0: Failed to write reg index 0x0000:
-19 [  288.706629] asix 1-1:1.0 eth0: Failed to write Medium Mode mode to
0xfeed: ffffffed [  288.759167] PM: suspend of devices complete after 52.772
msecs

Interestingly, it only seems to happen if the ethernet is in a disconnected
state when entering suspend. I have not had chance to look at this any
further, but wanted to see if you had any thoughts.

Cheers
Jon

--
nvpublic

Re: [PATCH v3 3/5] net: asix: Fix AX88772x resume failures

[Jon Hunter]

Hi Allan,

On 14/11/16 08:50, ASIX_Allan [Home] wrote:
> It seems the AX88772x dongle had been unexpectedly removed while running the
> ax88772_suspend() routine. If yes, you might see these error messages
> because the hardware had been absent.    

In my case the hardware was never removed. The boards are in a test
fixture that are not touched. This is seen on more than one board. By
reverting this change I no longer see the error messages and appears to
be 100% reproducible.

Jon

-- 
nvpublic

RE: [PATCH v3 3/5] net: asix: Fix AX88772x resume failures

[ASIX_Allan [Office]]

Hi Jon,

Please help to double check if the USB host controller of your Terga
platform had been powered OFF while running the ax88772_suspend() routine or
not? 

---
Best regards,
Allan Chou


-----Original Message-----
From: Jon Hunter [mailto:jonathanh@nvidia.com] 
Sent: Monday, November 14, 2016 5:34 PM
To: allan@asix.com.tw; robert.foss@collabora.com; freddy@asix.com.tw;
Dean_Jenkins@mentor.com; Mark_Craske@mentor.com; davem@davemloft.net;
ivecera@redhat.com; john.stultz@linaro.org; vpalatin@chromium.org;
stephen@networkplumber.org; grundler@chromium.org; changchias@gmail.com;
andrew@lunn.ch; tremyfr@gmail.com; colin.king@canonical.com;
linux-usb@vger.kernel.org; netdev@vger.kernel.org;
linux-kernel@vger.kernel.org; vpalatin@google.com
Subject: Re: [PATCH v3 3/5] net: asix: Fix AX88772x resume failures

Hi Allan,

On 14/11/16 08:50, ASIX_Allan [Home] wrote:
> It seems the AX88772x dongle had been unexpectedly removed while 
> running the
> ax88772_suspend() routine. If yes, you might see these error messages
> because the hardware had been absent.    

In my case the hardware was never removed. The boards are in a test fixture
that are not touched. This is seen on more than one board. By reverting this
change I no longer see the error messages and appears to be 100%
reproducible.

Jon

--
nvpublic

RE: [PATCH v3 3/5] net: asix: Fix AX88772x resume failures

[ASIX_Allan [Office]]

Hi Jon,

Please help to double check if the USB host controller of your Terga
platform had been powered OFF while running the ax88772_suspend() routine or
not? 

---
Best regards,
Allan Chou


-----Original Message-----
From: Jon Hunter [mailto:jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org] 
Sent: Monday, November 14, 2016 5:34 PM
To: allan-knRN6Y/kmf1NUHwG+Fw1Kw@public.gmane.org; robert.foss-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org; freddy-knRN6Y/kmf1NUHwG+Fw1Kw@public.gmane.org;
Dean_Jenkins-nmGgyN9QBj3QT0dZR+AlfA@public.gmane.org; Mark_Craske-nmGgyN9QBj3QT0dZR+AlfA@public.gmane.org; davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org;
ivecera-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org; john.stultz-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org; vpalatin-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org;
stephen-OTpzqLSitTUnbdJkjeBofR2eb7JE58TQ@public.gmane.org; grundler-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org; changchias-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org;
andrew-g2DYL2Zd6BY@public.gmane.org; tremyfr-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org; colin.king-Z7WLFzj8eWMS+FvcfC7Uqw@public.gmane.org;
linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org; netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org;
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org; vpalatin-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org
Subject: Re: [PATCH v3 3/5] net: asix: Fix AX88772x resume failures

Hi Allan,

On 14/11/16 08:50, ASIX_Allan [Home] wrote:
> It seems the AX88772x dongle had been unexpectedly removed while 
> running the
> ax88772_suspend() routine. If yes, you might see these error messages
> because the hardware had been absent.    

In my case the hardware was never removed. The boards are in a test fixture
that are not touched. This is seen on more than one board. By reverting this
change I no longer see the error messages and appears to be 100%
reproducible.

Jon

--
nvpublic

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v3 3/5] net: asix: Fix AX88772x resume failures

[Jon Hunter]

Hi Allan,

On 14/11/16 09:45, ASIX_Allan [Office] wrote:
> Hi Jon,
> 
> Please help to double check if the USB host controller of your Terga
> platform had been powered OFF while running the ax88772_suspend() routine or
> not? 

Sorry for the delay. Today I set up a local board to reproduce this on
and was able to recreate the same problem. The Tegra xhci driver does
not power off during suspend and simply calls xhci_suspend(). I also
checked vbus to see if it was turning off but it is not. Furthermore I
don't see a new USB device detected after the error and so I don't see
any evidence that it ever disconnects.

Cheers
Jon

-- 
nvpublic

Re: [PATCH v3 3/5] net: asix: Fix AX88772x resume failures

[Jon Hunter]

Hi Allan,

On 18/11/16 15:09, Jon Hunter wrote:
> Hi Allan,
> 
> On 14/11/16 09:45, ASIX_Allan [Office] wrote:
>> Hi Jon,
>>
>> Please help to double check if the USB host controller of your Terga
>> platform had been powered OFF while running the ax88772_suspend() routine or
>> not? 
> 
> Sorry for the delay. Today I set up a local board to reproduce this on
> and was able to recreate the same problem. The Tegra xhci driver does
> not power off during suspend and simply calls xhci_suspend(). I also
> checked vbus to see if it was turning off but it is not. Furthermore I
> don't see a new USB device detected after the error and so I don't see
> any evidence that it ever disconnects.

In an attempt to isolate if this is a Tegra issue or not, I recompiled 
v4.9-rc6 for x86 and I was able to reproduce the problem on my desktop ...

[  256.030060] PM: Syncing filesystems ... done.
[  256.113925] PM: Preparing system for sleep (mem)
[  256.114119] Freezing user space processes ... (elapsed 0.002 seconds) done.
[  256.116701] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[  256.118041] PM: Suspending system (mem)
[  256.118058] Suspending console(s) (use no_console_suspend to debug)
[  256.118324] asix 1-1.2:1.0 eth2: Failed to read reg index 0x0000: -19
[  256.118327] asix 1-1.2:1.0 eth2: Error reading Medium Status register: ffffffed
[  256.118329] asix 1-1.2:1.0 eth2: Failed to write reg index 0x0000: -19
[  256.118332] asix 1-1.2:1.0 eth2: Failed to write Medium Mode mode to 0xfeed: ffffffed
[  256.118374] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[  256.118471] sd 0:0:0:0: [sda] Stopping disk
[  256.152992] hpet1: lost 1 rtc interrupts
[  256.153893] serial 00:06: disabled
[  256.153899] serial 00:06: System wakeup disabled by ACPI
[  256.154068] e1000e: EEE TX LPI TIMER: 00000011
[  256.628281] PM: suspend of devices complete after 509.782 msecs
[  256.628620] PM: late suspend of devices complete after 0.336 msecs
[  256.629366] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[  256.629595] tg3 0000:03:00.0: System wakeup enabled by ACPI
[  256.629601] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[  256.629652] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[  256.629812] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[  256.648347] PM: noirq suspend of devices complete after 19.713 msecs
[  256.648685] ACPI: Preparing to enter system sleep state S3
[  256.668275] PM: Saving platform NVS memory
[  256.668283] Disabling non-boot CPUs ...

To reproduce this, I did the following:

1. Connect the asix device and noted the net interface (ie. eth2)
2. Disabled the interface (ie. sudo ifconfig eth2 down)
3. Ran a suspend-resume cycle using rtcwake (eg. sudo rtcwake -d rtc0 -m mem -s 5)

Cheers
Jon

-- 
nvpublic

RE: [PATCH v3 3/5] net: asix: Fix AX88772x resume failures

[ASIX_Allan [Office]]

Dear Jon ,

We can reproduce your issue on x86 Linux kernel 4.9.0-rc system in our site
and modified the following code can fix this issue. Please let us know if
you still have problems. Thanks a lot.

static void ax88772_suspend(struct usbnet *dev)
{
        struct asix_common_private *priv = dev->driver_priv;
        u16 medium;

        /* Stop MAC operation */
-       medium = asix_read_medium_status(dev, 0);
+      medium = asix_read_medium_status(dev, 1);
        medium &= ~AX_MEDIUM_RE;
-       asix_write_medium_mode(dev, medium, 0);
+      asix_write_medium_mode(dev, medium, 1);

        netdev_dbg(dev->net, "ax88772_suspend: medium=0x%04x\n",
-                  asix_read_medium_status(dev, 0));
+                 asix_read_medium_status(dev, 1));

        /* Preserve BMCR for restoring */
        priv->presvd_phy_bmcr =
                asix_mdio_read_nopm(dev->net, dev->mii.phy_id, MII_BMCR);

        /* Preserve ANAR for restoring */
        priv->presvd_phy_advertise =
                asix_mdio_read_nopm(dev->net, dev->mii.phy_id,
MII_ADVERTISE);
} 


---
Best regards,
Allan Chou
Technical Support Division
ASIX Electronics Corporation
TEL: 886-3-5799500 ext.228
FAX: 886-3-5799558
E-mail: allan@asix.com.tw 
http://www.asix.com.tw/ 


-----Original Message-----
From: Jon Hunter [mailto:jonathanh@nvidia.com] 
Sent: Tuesday, November 22, 2016 11:34 PM
To: allan@asix.com.tw; robert.foss@collabora.com; freddy@asix.com.tw;
Dean_Jenkins@mentor.com; Mark_Craske@mentor.com; davem@davemloft.net;
ivecera@redhat.com; john.stultz@linaro.org; vpalatin@chromium.org;
stephen@networkplumber.org; grundler@chromium.org; changchias@gmail.com;
andrew@lunn.ch; tremyfr@gmail.com; colin.king@canonical.com;
linux-usb@vger.kernel.org; netdev@vger.kernel.org;
linux-kernel@vger.kernel.org; vpalatin@google.com
Subject: Re: [PATCH v3 3/5] net: asix: Fix AX88772x resume failures

Hi Allan,

On 18/11/16 15:09, Jon Hunter wrote:
> Hi Allan,
> 
> On 14/11/16 09:45, ASIX_Allan [Office] wrote:
>> Hi Jon,
>>
>> Please help to double check if the USB host controller of your Terga 
>> platform had been powered OFF while running the ax88772_suspend() 
>> routine or not?
> 
> Sorry for the delay. Today I set up a local board to reproduce this on 
> and was able to recreate the same problem. The Tegra xhci driver does 
> not power off during suspend and simply calls xhci_suspend(). I also 
> checked vbus to see if it was turning off but it is not. Furthermore I 
> don't see a new USB device detected after the error and so I don't see 
> any evidence that it ever disconnects.

In an attempt to isolate if this is a Tegra issue or not, I recompiled
v4.9-rc6 for x86 and I was able to reproduce the problem on my desktop ...

[  256.030060] PM: Syncing filesystems ... done.
[  256.113925] PM: Preparing system for sleep (mem) [  256.114119] Freezing
user space processes ... (elapsed 0.002 seconds) done.
[  256.116701] Freezing remaining freezable tasks ... (elapsed 0.001
seconds) done.
[  256.118041] PM: Suspending system (mem) [  256.118058] Suspending
console(s) (use no_console_suspend to debug) [  256.118324] asix 1-1.2:1.0
eth2: Failed to read reg index 0x0000: -19 [  256.118327] asix 1-1.2:1.0
eth2: Error reading Medium Status register: ffffffed [  256.118329] asix
1-1.2:1.0 eth2: Failed to write reg index 0x0000: -19 [  256.118332] asix
1-1.2:1.0 eth2: Failed to write Medium Mode mode to 0xfeed: ffffffed [
256.118374] sd 0:0:0:0: [sda] Synchronizing SCSI cache [  256.118471] sd
0:0:0:0: [sda] Stopping disk [  256.152992] hpet1: lost 1 rtc interrupts [
256.153893] serial 00:06: disabled [  256.153899] serial 00:06: System
wakeup disabled by ACPI [  256.154068] e1000e: EEE TX LPI TIMER: 00000011 [
256.628281] PM: suspend of devices complete after 509.782 msecs [
256.628620] PM: late suspend of devices complete after 0.336 msecs [
256.629366] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [
256.629595] tg3 0000:03:00.0: System wakeup enabled by ACPI [  256.629601]
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [  256.629652] e1000e
0000:00:19.0: System wakeup enabled by ACPI [  256.629812] xhci_hcd
0000:00:14.0: System wakeup enabled by ACPI [  256.648347] PM: noirq suspend
of devices complete after 19.713 msecs [  256.648685] ACPI: Preparing to
enter system sleep state S3 [  256.668275] PM: Saving platform NVS memory [
256.668283] Disabling non-boot CPUs ...

To reproduce this, I did the following:

1. Connect the asix device and noted the net interface (ie. eth2) 2.
Disabled the interface (ie. sudo ifconfig eth2 down) 3. Ran a suspend-resume
cycle using rtcwake (eg. sudo rtcwake -d rtc0 -m mem -s 5)

Cheers
Jon

--
nvpublic

RE: [PATCH v3 3/5] net: asix: Fix AX88772x resume failures

[ASIX_Allan [Office]]

Dear Jon ,

We can reproduce your issue on x86 Linux kernel 4.9.0-rc system in our site
and modified the following code can fix this issue. Please let us know if
you still have problems. Thanks a lot.

static void ax88772_suspend(struct usbnet *dev)
{
        struct asix_common_private *priv = dev->driver_priv;
        u16 medium;

        /* Stop MAC operation */
-       medium = asix_read_medium_status(dev, 0);
+      medium = asix_read_medium_status(dev, 1);
        medium &= ~AX_MEDIUM_RE;
-       asix_write_medium_mode(dev, medium, 0);
+      asix_write_medium_mode(dev, medium, 1);

        netdev_dbg(dev->net, "ax88772_suspend: medium=0x%04x\n",
-                  asix_read_medium_status(dev, 0));
+                 asix_read_medium_status(dev, 1));

        /* Preserve BMCR for restoring */
        priv->presvd_phy_bmcr =
                asix_mdio_read_nopm(dev->net, dev->mii.phy_id, MII_BMCR);

        /* Preserve ANAR for restoring */
        priv->presvd_phy_advertise =
                asix_mdio_read_nopm(dev->net, dev->mii.phy_id,
MII_ADVERTISE);
} 


---
Best regards,
Allan Chou
Technical Support Division
ASIX Electronics Corporation
TEL: 886-3-5799500 ext.228
FAX: 886-3-5799558
E-mail: allan-knRN6Y/kmf1NUHwG+Fw1Kw@public.gmane.org 
http://www.asix.com.tw/ 


-----Original Message-----
From: Jon Hunter [mailto:jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org] 
Sent: Tuesday, November 22, 2016 11:34 PM
To: allan-knRN6Y/kmf1NUHwG+Fw1Kw@public.gmane.org; robert.foss-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org; freddy-knRN6Y/kmf1NUHwG+Fw1Kw@public.gmane.org;
Dean_Jenkins-nmGgyN9QBj3QT0dZR+AlfA@public.gmane.org; Mark_Craske-nmGgyN9QBj3QT0dZR+AlfA@public.gmane.org; davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org;
ivecera-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org; john.stultz-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org; vpalatin-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org;
stephen-OTpzqLSitTUnbdJkjeBofR2eb7JE58TQ@public.gmane.org; grundler-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org; changchias-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org;
andrew-g2DYL2Zd6BY@public.gmane.org; tremyfr-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org; colin.king-Z7WLFzj8eWMS+FvcfC7Uqw@public.gmane.org;
linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org; netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org;
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org; vpalatin-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org
Subject: Re: [PATCH v3 3/5] net: asix: Fix AX88772x resume failures

Hi Allan,

On 18/11/16 15:09, Jon Hunter wrote:
> Hi Allan,
> 
> On 14/11/16 09:45, ASIX_Allan [Office] wrote:
>> Hi Jon,
>>
>> Please help to double check if the USB host controller of your Terga 
>> platform had been powered OFF while running the ax88772_suspend() 
>> routine or not?
> 
> Sorry for the delay. Today I set up a local board to reproduce this on 
> and was able to recreate the same problem. The Tegra xhci driver does 
> not power off during suspend and simply calls xhci_suspend(). I also 
> checked vbus to see if it was turning off but it is not. Furthermore I 
> don't see a new USB device detected after the error and so I don't see 
> any evidence that it ever disconnects.

In an attempt to isolate if this is a Tegra issue or not, I recompiled
v4.9-rc6 for x86 and I was able to reproduce the problem on my desktop ...

[  256.030060] PM: Syncing filesystems ... done.
[  256.113925] PM: Preparing system for sleep (mem) [  256.114119] Freezing
user space processes ... (elapsed 0.002 seconds) done.
[  256.116701] Freezing remaining freezable tasks ... (elapsed 0.001
seconds) done.
[  256.118041] PM: Suspending system (mem) [  256.118058] Suspending
console(s) (use no_console_suspend to debug) [  256.118324] asix 1-1.2:1.0
eth2: Failed to read reg index 0x0000: -19 [  256.118327] asix 1-1.2:1.0
eth2: Error reading Medium Status register: ffffffed [  256.118329] asix
1-1.2:1.0 eth2: Failed to write reg index 0x0000: -19 [  256.118332] asix
1-1.2:1.0 eth2: Failed to write Medium Mode mode to 0xfeed: ffffffed [
256.118374] sd 0:0:0:0: [sda] Synchronizing SCSI cache [  256.118471] sd
0:0:0:0: [sda] Stopping disk [  256.152992] hpet1: lost 1 rtc interrupts [
256.153893] serial 00:06: disabled [  256.153899] serial 00:06: System
wakeup disabled by ACPI [  256.154068] e1000e: EEE TX LPI TIMER: 00000011 [
256.628281] PM: suspend of devices complete after 509.782 msecs [
256.628620] PM: late suspend of devices complete after 0.336 msecs [
256.629366] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [
256.629595] tg3 0000:03:00.0: System wakeup enabled by ACPI [  256.629601]
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [  256.629652] e1000e
0000:00:19.0: System wakeup enabled by ACPI [  256.629812] xhci_hcd
0000:00:14.0: System wakeup enabled by ACPI [  256.648347] PM: noirq suspend
of devices complete after 19.713 msecs [  256.648685] ACPI: Preparing to
enter system sleep state S3 [  256.668275] PM: Saving platform NVS memory [
256.668283] Disabling non-boot CPUs ...

To reproduce this, I did the following:

1. Connect the asix device and noted the net interface (ie. eth2) 2.
Disabled the interface (ie. sudo ifconfig eth2 down) 3. Ran a suspend-resume
cycle using rtcwake (eg. sudo rtcwake -d rtc0 -m mem -s 5)

Cheers
Jon

--
nvpublic

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v3 3/5] net: asix: Fix AX88772x resume failures

[Jon Hunter]

Hi Allan,

On 29/11/16 08:54, ASIX_Allan [Office] wrote:
> Dear Jon ,
> 
> We can reproduce your issue on x86 Linux kernel 4.9.0-rc system in our site
> and modified the following code can fix this issue. Please let us know if
> you still have problems. Thanks a lot.
> 
> static void ax88772_suspend(struct usbnet *dev)
> {
>         struct asix_common_private *priv = dev->driver_priv;
>         u16 medium;
> 
>         /* Stop MAC operation */
> -       medium = asix_read_medium_status(dev, 0);
> +      medium = asix_read_medium_status(dev, 1);
>         medium &= ~AX_MEDIUM_RE;
> -       asix_write_medium_mode(dev, medium, 0);
> +      asix_write_medium_mode(dev, medium, 1);
> 
>         netdev_dbg(dev->net, "ax88772_suspend: medium=0x%04x\n",
> -                  asix_read_medium_status(dev, 0));
> +                 asix_read_medium_status(dev, 1));
> 
>         /* Preserve BMCR for restoring */
>         priv->presvd_phy_bmcr =
>                 asix_mdio_read_nopm(dev->net, dev->mii.phy_id, MII_BMCR);
> 
>         /* Preserve ANAR for restoring */
>         priv->presvd_phy_advertise =
>                 asix_mdio_read_nopm(dev->net, dev->mii.phy_id,
> MII_ADVERTISE);
> } 

I gave this a quick test this morning and I can confirm that with the
above change I no longer see the error messages. So feel free to add my ...

Tested-by: Jon Hunter <jonathanh@nvidia.com>

Cheers
Jon

-- 
nvpublic

[PATCH v3 4/5] net: asix: see 802.3 spec for phy reset

[robert.foss]

From: Robert Foss <robert.foss@collabora.com>

From: Grant Grundler <grundler@chromium.org>

https://lkml.org/lkml/2014/11/11/947

Ben Hutchings is correct. IEEE 802.3 spec section "22.2.4.1.1 Reset" requires
up to 500ms delay. Mitigate the "max" delay by polling the phy until BCM_RESET
bit is clear.

Signed-off-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: Robert Foss <robert.foss@collabora.com>
Tested-by: Robert Foss <robert.foss@collabora.com>
---
 drivers/net/usb/asix_devices.c | 27 ++++++++++++++++++++++++---
 1 file changed, 24 insertions(+), 3 deletions(-)

diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
index 083dc2e..dbcdda2 100644
--- a/drivers/net/usb/asix_devices.c
+++ b/drivers/net/usb/asix_devices.c
@@ -212,6 +212,28 @@ static const struct net_device_ops ax88172_netdev_ops = {
 	.ndo_set_rx_mode	= ax88172_set_multicast,
 };
 
+static void asix_phy_reset(struct usbnet *dev, unsigned int reset_bits)
+{
+	unsigned int timeout = 5000;
+
+	asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, reset_bits);
+
+	/* give phy_id a chance to process reset */
+	udelay(500);
+
+	/* See IEEE 802.3 "22.2.4.1.1 Reset": 500ms max */
+	while (timeout--) {
+		if (asix_mdio_read(dev->net, dev->mii.phy_id, MII_BMCR)
+							& BMCR_RESET)
+			udelay(100);
+		else
+			return;
+	}
+
+	netdev_err(dev->net, "BMCR_RESET timeout on phy_id %d\n",
+		   dev->mii.phy_id);
+}
+
 static int ax88172_bind(struct usbnet *dev, struct usb_interface *intf)
 {
 	int ret = 0;
@@ -258,7 +280,7 @@ static int ax88172_bind(struct usbnet *dev, struct usb_interface *intf)
 	dev->net->needed_headroom = 4; /* cf asix_tx_fixup() */
 	dev->net->needed_tailroom = 4; /* cf asix_tx_fixup() */
 
-	asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
+	asix_phy_reset(dev, BMCR_RESET);
 	asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
 		ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
 	mii_nway_restart(&dev->mii);
@@ -900,8 +922,7 @@ static int ax88178_reset(struct usbnet *dev)
 	} else if (data->phymode == PHY_MODE_RTL8211CL)
 		rtl8211cl_phy_init(dev);
 
-	asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR,
-			BMCR_RESET | BMCR_ANENABLE);
+	asix_phy_reset(dev, BMCR_RESET | BMCR_ANENABLE);
 	asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
 			ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
 	asix_mdio_write(dev->net, dev->mii.phy_id, MII_CTRL1000,
-- 
git-series 0.8.10

[PATCH v3 5/5] net: asix: autoneg will set WRITE_MEDIUM reg

[robert.foss]

From: Robert Foss <robert.foss@collabora.com>

From: Grant Grundler <grundler@chromium.org>

The miii_nway_restart() causes a PHY link change activity and
ax88772_link_reset will be called. link_reset will set
AX_CMD_WRITE_MEDIUM_MODE register correctly.

The asix_write_medium_mode in reset() fills in a default value to the register
which may be different from the negotiation result. So do this first.

Ignore the ret value since it's ignored in XXX_link_reset() functions.

Signed-off-by: Grant Grundler <grundler@google.com>
Signed-off-by: Robert Foss <robert.foss@collabora.com>
Tested-by: Robert Foss <robert.foss@collabora.com>
---
 drivers/net/usb/asix_devices.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
index dbcdda2..cce2495 100644
--- a/drivers/net/usb/asix_devices.c
+++ b/drivers/net/usb/asix_devices.c
@@ -928,12 +928,9 @@ static int ax88178_reset(struct usbnet *dev)
 	asix_mdio_write(dev->net, dev->mii.phy_id, MII_CTRL1000,
 			ADVERTISE_1000FULL);
 
+	asix_write_medium_mode(dev, AX88178_MEDIUM_DEFAULT, 0);
 	mii_nway_restart(&dev->mii);
 
-	ret = asix_write_medium_mode(dev, AX88178_MEDIUM_DEFAULT, 0);
-	if (ret < 0)
-		return ret;
-
 	/* Rewrite MAC address */
 	memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN);
 	ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
-- 
git-series 0.8.10

Re: [PATCH v3 5/5] net: asix: autoneg will set WRITE_MEDIUM reg

[Eric Dumazet]

On Mon, 2016-08-29 at 09:32 -0400, robert.foss@collabora.com wrote:
> From: Robert Foss <robert.foss@collabora.com>
> 
> From: Grant Grundler <grundler@chromium.org>
> 
> The miii_nway_restart() causes a PHY link change activity and
> ax88772_link_reset will be called. link_reset will set
> AX_CMD_WRITE_MEDIUM_MODE register correctly.
> 
> The asix_write_medium_mode in reset() fills in a default value to the register
> which may be different from the negotiation result. So do this first.
> 
> Ignore the ret value since it's ignored in XXX_link_reset() functions.
> 
> Signed-off-by: Grant Grundler <grundler@google.com>
> Signed-off-by: Robert Foss <robert.foss@collabora.com>
> Tested-by: Robert Foss <robert.foss@collabora.com>
> ---

This is _really_ confusing Robert.

Why having two 'From:' clauses ?

Who wrote the patch in the first place ? You or Grant ?



End result is :

commit 535baf8588d04b177cb33700f81499f2b5203c2d
Author: Robert Foss <robert.foss@collabora.com>
Date:   Mon Aug 29 09:32:19 2016 -0400

    net: asix: autoneg will set WRITE_MEDIUM reg
    
    From: Grant Grundler <grundler@chromium.org>
    
    The miii_nway_restart() causes a PHY link change activity and
    ax88772_link_reset will be called. link_reset will set
    AX_CMD_WRITE_MEDIUM_MODE register correctly.
    
    The asix_write_medium_mode in reset() fills in a default value to the register
    which may be different from the negotiation result. So do this first.
    
    Ignore the ret value since it's ignored in XXX_link_reset() functions.
    
    Signed-off-by: Grant Grundler <grundler@google.com>
    Signed-off-by: Robert Foss <robert.foss@collabora.com>
    Tested-by: Robert Foss <robert.foss@collabora.com>
    Signed-off-by: David S. Miller <davem@davemloft.net>



I guess Grant wrote the patch, but attribution is wrong.

Re: [PATCH v3 5/5] net: asix: autoneg will set WRITE_MEDIUM reg

[Robert Foss]

On 2016-09-01 12:43 PM, Eric Dumazet wrote:
> On Mon, 2016-08-29 at 09:32 -0400, robert.foss@collabora.com wrote:
>> From: Robert Foss <robert.foss@collabora.com>
>>
>> From: Grant Grundler <grundler@chromium.org>
>>
>> The miii_nway_restart() causes a PHY link change activity and
>> ax88772_link_reset will be called. link_reset will set
>> AX_CMD_WRITE_MEDIUM_MODE register correctly.
>>
>> The asix_write_medium_mode in reset() fills in a default value to the register
>> which may be different from the negotiation result. So do this first.
>>
>> Ignore the ret value since it's ignored in XXX_link_reset() functions.
>>
>> Signed-off-by: Grant Grundler <grundler@google.com>
>> Signed-off-by: Robert Foss <robert.foss@collabora.com>
>> Tested-by: Robert Foss <robert.foss@collabora.com>
>> ---
>
> This is _really_ confusing Robert.
>
> Why having two 'From:' clauses ?
>
> Who wrote the patch in the first place ? You or Grant ?

I'm not quite sure how the first From line was added, it
should not have been.
Grant Grundler is most definitely the author.

Would you like me to resubmit in v++ and make sure that it has been 
corrected?

>
>
>
> End result is :
>
> commit 535baf8588d04b177cb33700f81499f2b5203c2d
> Author: Robert Foss <robert.foss@collabora.com>
> Date:   Mon Aug 29 09:32:19 2016 -0400
>
>     net: asix: autoneg will set WRITE_MEDIUM reg
>
>     From: Grant Grundler <grundler@chromium.org>
>
>     The miii_nway_restart() causes a PHY link change activity and
>     ax88772_link_reset will be called. link_reset will set
>     AX_CMD_WRITE_MEDIUM_MODE register correctly.
>
>     The asix_write_medium_mode in reset() fills in a default value to the register
>     which may be different from the negotiation result. So do this first.
>
>     Ignore the ret value since it's ignored in XXX_link_reset() functions.
>
>     Signed-off-by: Grant Grundler <grundler@google.com>
>     Signed-off-by: Robert Foss <robert.foss@collabora.com>
>     Tested-by: Robert Foss <robert.foss@collabora.com>
>     Signed-off-by: David S. Miller <davem@davemloft.net>
>
>
>
> I guess Grant wrote the patch, but attribution is wrong.
>
>

Re: [PATCH v3 5/5] net: asix: autoneg will set WRITE_MEDIUM reg

[Eric Dumazet]

On Thu, 2016-09-01 at 12:47 -0400, Robert Foss wrote:

> I'm not quite sure how the first From line was added, it
> should not have been.
> Grant Grundler is most definitely the author.
> 
> Would you like me to resubmit in v++ and make sure that it has been 
> corrected?

This is too late, patches are already merged in David Miller net-next
tree.

These kinds of errors can not be fixed, we have to be very careful at
submission/review time.

I guess Grant does not care, but some contributors, especially new ones
would like to get proper attribution.

Thanks.

Re: [PATCH v3 5/5] net: asix: autoneg will set WRITE_MEDIUM reg

[Eric Dumazet]

On Thu, 2016-09-01 at 12:47 -0400, Robert Foss wrote:

> I'm not quite sure how the first From line was added, it
> should not have been.
> Grant Grundler is most definitely the author.
> 
> Would you like me to resubmit in v++ and make sure that it has been 
> corrected?

This is too late, patches are already merged in David Miller net-next
tree.

These kinds of errors can not be fixed, we have to be very careful at
submission/review time.

I guess Grant does not care, but some contributors, especially new ones
would like to get proper attribution.

Thanks.


--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v3 5/5] net: asix: autoneg will set WRITE_MEDIUM reg

[Grant Grundler]

On Thu, Sep 1, 2016 at 10:02 AM, Eric Dumazet <eric.dumazet@gmail.com> wrote:
> On Thu, 2016-09-01 at 12:47 -0400, Robert Foss wrote:
>
>> I'm not quite sure how the first From line was added, it
>> should not have been.
>> Grant Grundler is most definitely the author.
>>
>> Would you like me to resubmit in v++ and make sure that it has been
>> corrected?
>
> This is too late, patches are already merged in David Miller net-next
> tree.
>
> These kinds of errors can not be fixed, we have to be very careful at
> submission/review time.
>
> I guess Grant does not care, but some contributors, especially new ones
> would like to get proper attribution.

I do not mind. Robert will get email about bugs instead of me. :D

cheers,
grant

>
> Thanks.
>
>

Re: [PATCH v3 5/5] net: asix: autoneg will set WRITE_MEDIUM reg

[Grant Grundler]

On Thu, Sep 1, 2016 at 10:02 AM, Eric Dumazet <eric.dumazet-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
> On Thu, 2016-09-01 at 12:47 -0400, Robert Foss wrote:
>
>> I'm not quite sure how the first From line was added, it
>> should not have been.
>> Grant Grundler is most definitely the author.
>>
>> Would you like me to resubmit in v++ and make sure that it has been
>> corrected?
>
> This is too late, patches are already merged in David Miller net-next
> tree.
>
> These kinds of errors can not be fixed, we have to be very careful at
> submission/review time.
>
> I guess Grant does not care, but some contributors, especially new ones
> would like to get proper attribution.

I do not mind. Robert will get email about bugs instead of me. :D

cheers,
grant

>
> Thanks.
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v3 5/5] net: asix: autoneg will set WRITE_MEDIUM reg

[Robert Foss]

On 2016-09-06 12:41 PM, Grant Grundler wrote:
> On Thu, Sep 1, 2016 at 10:02 AM, Eric Dumazet <eric.dumazet@gmail.com> wrote:
>> On Thu, 2016-09-01 at 12:47 -0400, Robert Foss wrote:
>>
>>> I'm not quite sure how the first From line was added, it
>>> should not have been.
>>> Grant Grundler is most definitely the author.
>>>
>>> Would you like me to resubmit in v++ and make sure that it has been
>>> corrected?
>>
>> This is too late, patches are already merged in David Miller net-next
>> tree.
>>
>> These kinds of errors can not be fixed, we have to be very careful at
>> submission/review time.
>>
>> I guess Grant does not care, but some contributors, especially new ones
>> would like to get proper attribution.
>
> I do not mind. Robert will get email about bugs instead of me. :D

Thanks Grant, sorry about the mixup!


Rob.

[PATCH v3 1/5] net: asix: Add in_pm parameter

[robert.foss]

From: Freddy Xin <freddy@asix.com.tw>

In order to R/W registers in suspend/resume functions, in_pm flags are
added to some functions to determine whether the nopm version of usb
functions is called.

Save BMCR and ANAR PHY registers in suspend function and restore them
in resume function.

Reset HW in resume function to ensure the PHY works correctly.

Signed-off-by: Freddy Xin <freddy@asix.com.tw>
Signed-off-by: Robert Foss <robert.foss@collabora.com>
Tested-by: Robert Foss <robert.foss@collabora.com>
---
 drivers/net/usb/asix.h         |  40 +++--
 drivers/net/usb/asix_common.c  | 180 +++++++++++++++-----
 drivers/net/usb/asix_devices.c | 373 ++++++++++++++++++++++++++++++++---------
 drivers/net/usb/ax88172a.c     |  29 ++--
 4 files changed, 472 insertions(+), 150 deletions(-)

diff --git a/drivers/net/usb/asix.h b/drivers/net/usb/asix.h
index a2d3ea6..d109242 100644
--- a/drivers/net/usb/asix.h
+++ b/drivers/net/usb/asix.h
@@ -46,6 +46,7 @@
 #define AX_CMD_SET_SW_MII		0x06
 #define AX_CMD_READ_MII_REG		0x07
 #define AX_CMD_WRITE_MII_REG		0x08
+#define AX_CMD_STATMNGSTS_REG		0x09
 #define AX_CMD_SET_HW_MII		0x0a
 #define AX_CMD_READ_EEPROM		0x0b
 #define AX_CMD_WRITE_EEPROM		0x0c
@@ -71,6 +72,17 @@
 #define AX_CMD_SW_RESET			0x20
 #define AX_CMD_SW_PHY_STATUS		0x21
 #define AX_CMD_SW_PHY_SELECT		0x22
+#define AX_QCTCTRL			0x2A
+
+#define AX_CHIPCODE_MASK		0x70
+#define AX_AX88772_CHIPCODE		0x00
+#define AX_AX88772A_CHIPCODE		0x10
+#define AX_AX88772B_CHIPCODE		0x20
+#define AX_HOST_EN			0x01
+
+#define AX_PHYSEL_PSEL			0x01
+#define AX_PHYSEL_SSMII			0
+#define AX_PHYSEL_SSEN			0x10
 
 #define AX_PHY_SELECT_MASK		(BIT(3) | BIT(2))
 #define AX_PHY_SELECT_INTERNAL		0
@@ -173,6 +185,10 @@ struct asix_rx_fixup_info {
 };
 
 struct asix_common_private {
+	void (*resume)(struct usbnet *dev);
+	void (*suspend)(struct usbnet *dev);
+	u16 presvd_phy_advertise;
+	u16 presvd_phy_bmcr;
 	struct asix_rx_fixup_info rx_fixup_info;
 };
 
@@ -182,10 +198,10 @@ extern const struct driver_info ax88172a_info;
 #define FLAG_EEPROM_MAC		(1UL << 0)  /* init device MAC from eeprom */
 
 int asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
-		  u16 size, void *data);
+		  u16 size, void *data, int in_pm);
 
 int asix_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
-		   u16 size, void *data);
+		   u16 size, void *data, int in_pm);
 
 void asix_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value,
 			  u16 index, u16 size, void *data);
@@ -197,27 +213,31 @@ int asix_rx_fixup_common(struct usbnet *dev, struct sk_buff *skb);
 struct sk_buff *asix_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
 			      gfp_t flags);
 
-int asix_set_sw_mii(struct usbnet *dev);
-int asix_set_hw_mii(struct usbnet *dev);
+int asix_set_sw_mii(struct usbnet *dev, int in_pm);
+int asix_set_hw_mii(struct usbnet *dev, int in_pm);
 
 int asix_read_phy_addr(struct usbnet *dev, int internal);
 int asix_get_phy_addr(struct usbnet *dev);
 
-int asix_sw_reset(struct usbnet *dev, u8 flags);
+int asix_sw_reset(struct usbnet *dev, u8 flags, int in_pm);
 
-u16 asix_read_rx_ctl(struct usbnet *dev);
-int asix_write_rx_ctl(struct usbnet *dev, u16 mode);
+u16 asix_read_rx_ctl(struct usbnet *dev, int in_pm);
+int asix_write_rx_ctl(struct usbnet *dev, u16 mode, int in_pm);
 
-u16 asix_read_medium_status(struct usbnet *dev);
-int asix_write_medium_mode(struct usbnet *dev, u16 mode);
+u16 asix_read_medium_status(struct usbnet *dev, int in_pm);
+int asix_write_medium_mode(struct usbnet *dev, u16 mode, int in_pm);
 
-int asix_write_gpio(struct usbnet *dev, u16 value, int sleep);
+int asix_write_gpio(struct usbnet *dev, u16 value, int sleep, int in_pm);
 
 void asix_set_multicast(struct net_device *net);
 
 int asix_mdio_read(struct net_device *netdev, int phy_id, int loc);
 void asix_mdio_write(struct net_device *netdev, int phy_id, int loc, int val);
 
+int asix_mdio_read_nopm(struct net_device *netdev, int phy_id, int loc);
+void asix_mdio_write_nopm(struct net_device *netdev, int phy_id, int loc,
+			  int val);
+
 void asix_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo);
 int asix_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo);
 
diff --git a/drivers/net/usb/asix_common.c b/drivers/net/usb/asix_common.c
index 7de5ab5..25609ee 100644
--- a/drivers/net/usb/asix_common.c
+++ b/drivers/net/usb/asix_common.c
@@ -22,24 +22,49 @@
 #include "asix.h"
 
 int asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
-		  u16 size, void *data)
+		  u16 size, void *data, int in_pm)
 {
 	int ret;
-	ret = usbnet_read_cmd(dev, cmd,
-			       USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-			       value, index, data, size);
+	int (*fn)(struct usbnet *, u8, u8, u16, u16, void *, u16);
+
+	BUG_ON(!dev);
+
+	if (!in_pm)
+		fn = usbnet_read_cmd;
+	else
+		fn = usbnet_read_cmd_nopm;
+
+	ret = fn(dev, cmd, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+		 value, index, data, size);
+
+	if (unlikely(ret < 0))
+		netdev_warn(dev->net, "Failed to read reg index 0x%04x: %d\n",
+			    index, ret);
 
-	if (ret != size && ret >= 0)
-		return -EINVAL;
 	return ret;
 }
 
 int asix_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
-		   u16 size, void *data)
+		   u16 size, void *data, int in_pm)
 {
-	return usbnet_write_cmd(dev, cmd,
-				USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-				value, index, data, size);
+	int ret;
+	int (*fn)(struct usbnet *, u8, u8, u16, u16, const void *, u16);
+
+	BUG_ON(!dev);
+
+	if (!in_pm)
+		fn = usbnet_write_cmd;
+	else
+		fn = usbnet_write_cmd_nopm;
+
+	ret = fn(dev, cmd, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+		 value, index, data, size);
+
+	if (unlikely(ret < 0))
+		netdev_warn(dev->net, "Failed to write reg index 0x%04x: %d\n",
+			    index, ret);
+
+	return ret;
 }
 
 void asix_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index,
@@ -225,19 +250,20 @@ struct sk_buff *asix_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
 	return skb;
 }
 
-int asix_set_sw_mii(struct usbnet *dev)
+int asix_set_sw_mii(struct usbnet *dev, int in_pm)
 {
 	int ret;
-	ret = asix_write_cmd(dev, AX_CMD_SET_SW_MII, 0x0000, 0, 0, NULL);
+	ret = asix_write_cmd(dev, AX_CMD_SET_SW_MII, 0x0000, 0, 0, NULL, in_pm);
+
 	if (ret < 0)
 		netdev_err(dev->net, "Failed to enable software MII access\n");
 	return ret;
 }
 
-int asix_set_hw_mii(struct usbnet *dev)
+int asix_set_hw_mii(struct usbnet *dev, int in_pm)
 {
 	int ret;
-	ret = asix_write_cmd(dev, AX_CMD_SET_HW_MII, 0x0000, 0, 0, NULL);
+	ret = asix_write_cmd(dev, AX_CMD_SET_HW_MII, 0x0000, 0, 0, NULL, in_pm);
 	if (ret < 0)
 		netdev_err(dev->net, "Failed to enable hardware MII access\n");
 	return ret;
@@ -247,7 +273,7 @@ int asix_read_phy_addr(struct usbnet *dev, int internal)
 {
 	int offset = (internal ? 1 : 0);
 	u8 buf[2];
-	int ret = asix_read_cmd(dev, AX_CMD_READ_PHY_ID, 0, 0, 2, buf);
+	int ret = asix_read_cmd(dev, AX_CMD_READ_PHY_ID, 0, 0, 2, buf, 0);
 
 	netdev_dbg(dev->net, "asix_get_phy_addr()\n");
 
@@ -270,21 +296,21 @@ int asix_get_phy_addr(struct usbnet *dev)
 }
 
 
-int asix_sw_reset(struct usbnet *dev, u8 flags)
+int asix_sw_reset(struct usbnet *dev, u8 flags, int in_pm)
 {
 	int ret;
 
-        ret = asix_write_cmd(dev, AX_CMD_SW_RESET, flags, 0, 0, NULL);
+	ret = asix_write_cmd(dev, AX_CMD_SW_RESET, flags, 0, 0, NULL, in_pm);
 	if (ret < 0)
 		netdev_err(dev->net, "Failed to send software reset: %02x\n", ret);
 
 	return ret;
 }
 
-u16 asix_read_rx_ctl(struct usbnet *dev)
+u16 asix_read_rx_ctl(struct usbnet *dev, int in_pm)
 {
 	__le16 v;
-	int ret = asix_read_cmd(dev, AX_CMD_READ_RX_CTL, 0, 0, 2, &v);
+	int ret = asix_read_cmd(dev, AX_CMD_READ_RX_CTL, 0, 0, 2, &v, in_pm);
 
 	if (ret < 0) {
 		netdev_err(dev->net, "Error reading RX_CTL register: %02x\n", ret);
@@ -295,12 +321,12 @@ out:
 	return ret;
 }
 
-int asix_write_rx_ctl(struct usbnet *dev, u16 mode)
+int asix_write_rx_ctl(struct usbnet *dev, u16 mode, int in_pm)
 {
 	int ret;
 
 	netdev_dbg(dev->net, "asix_write_rx_ctl() - mode = 0x%04x\n", mode);
-	ret = asix_write_cmd(dev, AX_CMD_WRITE_RX_CTL, mode, 0, 0, NULL);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_RX_CTL, mode, 0, 0, NULL, in_pm);
 	if (ret < 0)
 		netdev_err(dev->net, "Failed to write RX_CTL mode to 0x%04x: %02x\n",
 			   mode, ret);
@@ -308,10 +334,11 @@ int asix_write_rx_ctl(struct usbnet *dev, u16 mode)
 	return ret;
 }
 
-u16 asix_read_medium_status(struct usbnet *dev)
+u16 asix_read_medium_status(struct usbnet *dev, int in_pm)
 {
 	__le16 v;
-	int ret = asix_read_cmd(dev, AX_CMD_READ_MEDIUM_STATUS, 0, 0, 2, &v);
+	int ret = asix_read_cmd(dev, AX_CMD_READ_MEDIUM_STATUS,
+				0, 0, 2, &v, in_pm);
 
 	if (ret < 0) {
 		netdev_err(dev->net, "Error reading Medium Status register: %02x\n",
@@ -323,12 +350,13 @@ u16 asix_read_medium_status(struct usbnet *dev)
 
 }
 
-int asix_write_medium_mode(struct usbnet *dev, u16 mode)
+int asix_write_medium_mode(struct usbnet *dev, u16 mode, int in_pm)
 {
 	int ret;
 
 	netdev_dbg(dev->net, "asix_write_medium_mode() - mode = 0x%04x\n", mode);
-	ret = asix_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE,
+			     mode, 0, 0, NULL, in_pm);
 	if (ret < 0)
 		netdev_err(dev->net, "Failed to write Medium Mode mode to 0x%04x: %02x\n",
 			   mode, ret);
@@ -336,12 +364,12 @@ int asix_write_medium_mode(struct usbnet *dev, u16 mode)
 	return ret;
 }
 
-int asix_write_gpio(struct usbnet *dev, u16 value, int sleep)
+int asix_write_gpio(struct usbnet *dev, u16 value, int sleep, int in_pm)
 {
 	int ret;
 
 	netdev_dbg(dev->net, "asix_write_gpio() - value = 0x%04x\n", value);
-	ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS, value, 0, 0, NULL);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS, value, 0, 0, NULL, in_pm);
 	if (ret < 0)
 		netdev_err(dev->net, "Failed to write GPIO value 0x%04x: %02x\n",
 			   value, ret);
@@ -398,16 +426,23 @@ int asix_mdio_read(struct net_device *netdev, int phy_id, int loc)
 {
 	struct usbnet *dev = netdev_priv(netdev);
 	__le16 res;
+	u8 smsr;
+	int i = 0;
 
 	mutex_lock(&dev->phy_mutex);
-	asix_set_sw_mii(dev);
+	do {
+		asix_set_sw_mii(dev, 0);
+		usleep_range(1000, 1100);
+		asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1, &smsr, 0);
+	} while (!(smsr & AX_HOST_EN) && (i++ < 30));
+
 	asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id,
-				(__u16)loc, 2, &res);
-	asix_set_hw_mii(dev);
+				(__u16)loc, 2, &res, 0);
+	asix_set_hw_mii(dev, 0);
 	mutex_unlock(&dev->phy_mutex);
 
 	netdev_dbg(dev->net, "asix_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n",
-		   phy_id, loc, le16_to_cpu(res));
+			phy_id, loc, le16_to_cpu(res));
 
 	return le16_to_cpu(res);
 }
@@ -416,13 +451,71 @@ void asix_mdio_write(struct net_device *netdev, int phy_id, int loc, int val)
 {
 	struct usbnet *dev = netdev_priv(netdev);
 	__le16 res = cpu_to_le16(val);
+	u8 smsr;
+	int i = 0;
 
 	netdev_dbg(dev->net, "asix_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n",
-		   phy_id, loc, val);
+			phy_id, loc, val);
+
+	mutex_lock(&dev->phy_mutex);
+	do {
+		asix_set_sw_mii(dev, 0);
+		usleep_range(1000, 1100);
+		asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1, &smsr, 0);
+	} while (!(smsr & AX_HOST_EN) && (i++ < 30));
+
+	asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id,
+		       (__u16)loc, 2, &res, 0);
+	asix_set_hw_mii(dev, 0);
+	mutex_unlock(&dev->phy_mutex);
+}
+
+int asix_mdio_read_nopm(struct net_device *netdev, int phy_id, int loc)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	__le16 res;
+	u8 smsr;
+	int i = 0;
+
+	mutex_lock(&dev->phy_mutex);
+	do {
+		asix_set_sw_mii(dev, 1);
+		usleep_range(1000, 1100);
+		asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1, &smsr, 1);
+	} while (!(smsr & AX_HOST_EN) && (i++ < 30));
+
+	asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id,
+		      (__u16)loc, 2, &res, 1);
+	asix_set_hw_mii(dev, 1);
+	mutex_unlock(&dev->phy_mutex);
+
+	netdev_dbg(dev->net, "asix_mdio_read_nopm() phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n",
+			phy_id, loc, le16_to_cpu(res));
+
+	return le16_to_cpu(res);
+}
+
+void
+asix_mdio_write_nopm(struct net_device *netdev, int phy_id, int loc, int val)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	__le16 res = cpu_to_le16(val);
+	u8 smsr;
+	int i = 0;
+
+	netdev_dbg(dev->net, "asix_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n",
+			phy_id, loc, val);
+
 	mutex_lock(&dev->phy_mutex);
-	asix_set_sw_mii(dev);
-	asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id, (__u16)loc, 2, &res);
-	asix_set_hw_mii(dev);
+	do {
+		asix_set_sw_mii(dev, 1);
+		usleep_range(1000, 1100);
+		asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1, &smsr, 1);
+	} while (!(smsr & AX_HOST_EN) && (i++ < 30));
+
+	asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id,
+		       (__u16)loc, 2, &res, 1);
+	asix_set_hw_mii(dev, 1);
 	mutex_unlock(&dev->phy_mutex);
 }
 
@@ -431,7 +524,8 @@ void asix_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
 	struct usbnet *dev = netdev_priv(net);
 	u8 opt;
 
-	if (asix_read_cmd(dev, AX_CMD_READ_MONITOR_MODE, 0, 0, 1, &opt) < 0) {
+	if (asix_read_cmd(dev, AX_CMD_READ_MONITOR_MODE,
+			  0, 0, 1, &opt, 0) < 0) {
 		wolinfo->supported = 0;
 		wolinfo->wolopts = 0;
 		return;
@@ -455,7 +549,7 @@ int asix_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
 		opt |= AX_MONITOR_MAGIC;
 
 	if (asix_write_cmd(dev, AX_CMD_WRITE_MONITOR_MODE,
-			      opt, 0, 0, NULL) < 0)
+			      opt, 0, 0, NULL, 0) < 0)
 		return -EINVAL;
 
 	return 0;
@@ -490,7 +584,7 @@ int asix_get_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
 	/* ax8817x returns 2 bytes from eeprom on read */
 	for (i = first_word; i <= last_word; i++) {
 		if (asix_read_cmd(dev, AX_CMD_READ_EEPROM, i, 0, 2,
-				  &(eeprom_buff[i - first_word])) < 0) {
+				  &eeprom_buff[i - first_word], 0) < 0) {
 			kfree(eeprom_buff);
 			return -EIO;
 		}
@@ -531,7 +625,7 @@ int asix_set_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
 	   the EEPROM */
 	if (eeprom->offset & 1) {
 		ret = asix_read_cmd(dev, AX_CMD_READ_EEPROM, first_word, 0, 2,
-				    &(eeprom_buff[0]));
+				    &eeprom_buff[0], 0);
 		if (ret < 0) {
 			netdev_err(net, "Failed to read EEPROM at offset 0x%02x.\n", first_word);
 			goto free;
@@ -540,7 +634,7 @@ int asix_set_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
 
 	if ((eeprom->offset + eeprom->len) & 1) {
 		ret = asix_read_cmd(dev, AX_CMD_READ_EEPROM, last_word, 0, 2,
-				    &(eeprom_buff[last_word - first_word]));
+				    &eeprom_buff[last_word - first_word], 0);
 		if (ret < 0) {
 			netdev_err(net, "Failed to read EEPROM at offset 0x%02x.\n", last_word);
 			goto free;
@@ -550,7 +644,7 @@ int asix_set_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
 	memcpy((u8 *)eeprom_buff + (eeprom->offset & 1), data, eeprom->len);
 
 	/* write data to EEPROM */
-	ret = asix_write_cmd(dev, AX_CMD_WRITE_ENABLE, 0x0000, 0, 0, NULL);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_ENABLE, 0x0000, 0, 0, NULL, 0);
 	if (ret < 0) {
 		netdev_err(net, "Failed to enable EEPROM write\n");
 		goto free;
@@ -561,7 +655,7 @@ int asix_set_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
 		netdev_dbg(net, "write to EEPROM at offset 0x%02x, data 0x%04x\n",
 			   i, eeprom_buff[i - first_word]);
 		ret = asix_write_cmd(dev, AX_CMD_WRITE_EEPROM, i,
-				     eeprom_buff[i - first_word], 0, NULL);
+				     eeprom_buff[i - first_word], 0, NULL, 0);
 		if (ret < 0) {
 			netdev_err(net, "Failed to write EEPROM at offset 0x%02x.\n",
 				   i);
@@ -570,7 +664,7 @@ int asix_set_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
 		msleep(20);
 	}
 
-	ret = asix_write_cmd(dev, AX_CMD_WRITE_DISABLE, 0x0000, 0, 0, NULL);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_DISABLE, 0x0000, 0, 0, NULL, 0);
 	if (ret < 0) {
 		netdev_err(net, "Failed to disable EEPROM write\n");
 		goto free;
diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
index 5cabefc..aaa4290 100644
--- a/drivers/net/usb/asix_devices.c
+++ b/drivers/net/usb/asix_devices.c
@@ -184,7 +184,7 @@ static int ax88172_link_reset(struct usbnet *dev)
 	netdev_dbg(dev->net, "ax88172_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n",
 		   ethtool_cmd_speed(&ecmd), ecmd.duplex, mode);
 
-	asix_write_medium_mode(dev, mode);
+	asix_write_medium_mode(dev, mode, 0);
 
 	return 0;
 }
@@ -213,18 +213,19 @@ static int ax88172_bind(struct usbnet *dev, struct usb_interface *intf)
 	/* Toggle the GPIOs in a manufacturer/model specific way */
 	for (i = 2; i >= 0; i--) {
 		ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS,
-				(gpio_bits >> (i * 8)) & 0xff, 0, 0, NULL);
+				(gpio_bits >> (i * 8)) & 0xff, 0, 0, NULL, 0);
 		if (ret < 0)
 			goto out;
 		msleep(5);
 	}
 
-	ret = asix_write_rx_ctl(dev, 0x80);
+	ret = asix_write_rx_ctl(dev, 0x80, 0);
 	if (ret < 0)
 		goto out;
 
 	/* Get the MAC address */
-	ret = asix_read_cmd(dev, AX88172_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf);
+	ret = asix_read_cmd(dev, AX88172_CMD_READ_NODE_ID,
+			    0, 0, ETH_ALEN, buf, 0);
 	if (ret < 0) {
 		netdev_dbg(dev->net, "read AX_CMD_READ_NODE_ID failed: %d\n",
 			   ret);
@@ -290,7 +291,7 @@ static int ax88772_link_reset(struct usbnet *dev)
 	netdev_dbg(dev->net, "ax88772_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n",
 		   ethtool_cmd_speed(&ecmd), ecmd.duplex, mode);
 
-	asix_write_medium_mode(dev, mode);
+	asix_write_medium_mode(dev, mode, 0);
 
 	return 0;
 }
@@ -298,78 +299,192 @@ static int ax88772_link_reset(struct usbnet *dev)
 static int ax88772_reset(struct usbnet *dev)
 {
 	struct asix_data *data = (struct asix_data *)&dev->data;
+	int ret;
+
+	/* Rewrite MAC address */
+	ether_addr_copy(data->mac_addr, dev->net->dev_addr);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0,
+			     ETH_ALEN, data->mac_addr, 0);
+	if (ret < 0)
+		goto out;
+
+	/* Set RX_CTL to default values with 2k buffer, and enable cactus */
+	ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, 0);
+	if (ret < 0)
+		goto out;
+
+	asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT, 0);
+	if (ret < 0)
+		goto out;
+
+	return 0;
+
+out:
+	return ret;
+}
+
+static int ax88772_hw_reset(struct usbnet *dev, int in_pm)
+{
+	struct asix_data *data = (struct asix_data *)&dev->data;
 	int ret, embd_phy;
 	u16 rx_ctl;
 
-	ret = asix_write_gpio(dev,
-			AX_GPIO_RSE | AX_GPIO_GPO_2 | AX_GPIO_GPO2EN, 5);
+	ret = asix_write_gpio(dev, AX_GPIO_RSE | AX_GPIO_GPO_2 |
+			      AX_GPIO_GPO2EN, 5, in_pm);
 	if (ret < 0)
 		goto out;
 
-	embd_phy = ((asix_get_phy_addr(dev) & 0x1f) == 0x10 ? 1 : 0);
+	embd_phy = ((dev->mii.phy_id & 0x1f) == 0x10 ? 1 : 0);
 
-	ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, embd_phy, 0, 0, NULL);
+	ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, embd_phy,
+			     0, 0, NULL, in_pm);
 	if (ret < 0) {
 		netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret);
 		goto out;
 	}
 
-	ret = asix_sw_reset(dev, AX_SWRESET_IPPD | AX_SWRESET_PRL);
-	if (ret < 0)
-		goto out;
+	if (embd_phy) {
+		ret = asix_sw_reset(dev, AX_SWRESET_IPPD, in_pm);
+		if (ret < 0)
+			goto out;
 
-	msleep(150);
+		usleep_range(10000, 11000);
 
-	ret = asix_sw_reset(dev, AX_SWRESET_CLEAR);
-	if (ret < 0)
-		goto out;
+		ret = asix_sw_reset(dev, AX_SWRESET_CLEAR, in_pm);
+		if (ret < 0)
+			goto out;
 
-	msleep(150);
+		msleep(60);
 
-	if (embd_phy) {
-		ret = asix_sw_reset(dev, AX_SWRESET_IPRL);
+		ret = asix_sw_reset(dev, AX_SWRESET_IPRL | AX_SWRESET_PRL,
+				    in_pm);
 		if (ret < 0)
 			goto out;
 	} else {
-		ret = asix_sw_reset(dev, AX_SWRESET_PRTE);
+		ret = asix_sw_reset(dev, AX_SWRESET_IPPD | AX_SWRESET_PRL,
+				    in_pm);
 		if (ret < 0)
 			goto out;
 	}
 
 	msleep(150);
-	rx_ctl = asix_read_rx_ctl(dev);
-	netdev_dbg(dev->net, "RX_CTL is 0x%04x after software reset\n", rx_ctl);
-	ret = asix_write_rx_ctl(dev, 0x0000);
+
+	if (in_pm && (!asix_mdio_read_nopm(dev->net, dev->mii.phy_id,
+					   MII_PHYSID1))){
+		ret = -EIO;
+		goto out;
+	}
+
+	ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, in_pm);
+	if (ret < 0)
+		goto out;
+
+	ret = asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT, in_pm);
 	if (ret < 0)
 		goto out;
 
-	rx_ctl = asix_read_rx_ctl(dev);
-	netdev_dbg(dev->net, "RX_CTL is 0x%04x setting to 0x0000\n", rx_ctl);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0,
+			     AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT,
+			     AX88772_IPG2_DEFAULT, 0, NULL, in_pm);
+	if (ret < 0) {
+		netdev_dbg(dev->net, "Write IPG,IPG1,IPG2 failed: %d\n", ret);
+		goto out;
+	}
 
-	ret = asix_sw_reset(dev, AX_SWRESET_PRL);
+	/* Rewrite MAC address */
+	ether_addr_copy(data->mac_addr, dev->net->dev_addr);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0,
+			     ETH_ALEN, data->mac_addr, in_pm);
 	if (ret < 0)
 		goto out;
 
-	msleep(150);
+	/* Set RX_CTL to default values with 2k buffer, and enable cactus */
+	ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, in_pm);
+	if (ret < 0)
+		goto out;
+
+	rx_ctl = asix_read_rx_ctl(dev, in_pm);
+	netdev_dbg(dev->net, "RX_CTL is 0x%04x after all initializations\n",
+		   rx_ctl);
+
+	rx_ctl = asix_read_medium_status(dev, in_pm);
+	netdev_dbg(dev->net,
+		   "Medium Status is 0x%04x after all initializations\n",
+		   rx_ctl);
+
+	return 0;
+
+out:
+	return ret;
+}
+
+static int ax88772a_hw_reset(struct usbnet *dev, int in_pm)
+{
+	struct asix_data *data = (struct asix_data *)&dev->data;
+	int ret, embd_phy;
+	u16 rx_ctl;
+	u8 chipcode = 0;
 
-	ret = asix_sw_reset(dev, AX_SWRESET_IPRL | AX_SWRESET_PRL);
+	ret = asix_write_gpio(dev, AX_GPIO_RSE, 5, in_pm);
 	if (ret < 0)
 		goto out;
 
-	msleep(150);
+	embd_phy = ((dev->mii.phy_id & 0x1f) == 0x10 ? 1 : 0);
 
-	asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
-	asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
-			ADVERTISE_ALL | ADVERTISE_CSMA);
-	mii_nway_restart(&dev->mii);
+	ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, embd_phy |
+			     AX_PHYSEL_SSEN, 0, 0, NULL, in_pm);
+	if (ret < 0) {
+		netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret);
+		goto out;
+	}
+	usleep_range(10000, 11000);
 
-	ret = asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT);
+	ret = asix_sw_reset(dev, AX_SWRESET_IPPD | AX_SWRESET_IPRL, in_pm);
 	if (ret < 0)
 		goto out;
 
+	usleep_range(10000, 11000);
+
+	ret = asix_sw_reset(dev, AX_SWRESET_IPRL, in_pm);
+	if (ret < 0)
+		goto out;
+
+	msleep(160);
+
+	ret = asix_sw_reset(dev, AX_SWRESET_CLEAR, in_pm);
+	if (ret < 0)
+		goto out;
+
+	ret = asix_sw_reset(dev, AX_SWRESET_IPRL, in_pm);
+	if (ret < 0)
+		goto out;
+
+	msleep(200);
+
+	if (in_pm && (!asix_mdio_read_nopm(dev->net, dev->mii.phy_id,
+					   MII_PHYSID1))) {
+		ret = -1;
+		goto out;
+	}
+
+	ret = asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0,
+			    0, 1, &chipcode, in_pm);
+	if (ret < 0)
+		goto out;
+
+	if ((chipcode & AX_CHIPCODE_MASK) == AX_AX88772B_CHIPCODE) {
+		ret = asix_write_cmd(dev, AX_QCTCTRL, 0x8000, 0x8001,
+				     0, NULL, in_pm);
+		if (ret < 0) {
+			netdev_dbg(dev->net, "Write BQ setting failed: %d\n",
+				   ret);
+			goto out;
+		}
+	}
+
 	ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0,
 				AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT,
-				AX88772_IPG2_DEFAULT, 0, NULL);
+				AX88772_IPG2_DEFAULT, 0, NULL, in_pm);
 	if (ret < 0) {
 		netdev_dbg(dev->net, "Write IPG,IPG1,IPG2 failed: %d\n", ret);
 		goto out;
@@ -378,20 +493,29 @@ static int ax88772_reset(struct usbnet *dev)
 	/* Rewrite MAC address */
 	memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN);
 	ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
-							data->mac_addr);
+							data->mac_addr, in_pm);
+	if (ret < 0)
+		goto out;
+
+	/* Set RX_CTL to default values with 2k buffer, and enable cactus */
+	ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, in_pm);
 	if (ret < 0)
 		goto out;
 
+	ret = asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT, in_pm);
+	if (ret < 0)
+		return ret;
+
 	/* Set RX_CTL to default values with 2k buffer, and enable cactus */
-	ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL);
+	ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, in_pm);
 	if (ret < 0)
 		goto out;
 
-	rx_ctl = asix_read_rx_ctl(dev);
+	rx_ctl = asix_read_rx_ctl(dev, in_pm);
 	netdev_dbg(dev->net, "RX_CTL is 0x%04x after all initializations\n",
 		   rx_ctl);
 
-	rx_ctl = asix_read_medium_status(dev);
+	rx_ctl = asix_read_medium_status(dev, in_pm);
 	netdev_dbg(dev->net,
 		   "Medium Status is 0x%04x after all initializations\n",
 		   rx_ctl);
@@ -400,7 +524,6 @@ static int ax88772_reset(struct usbnet *dev)
 
 out:
 	return ret;
-
 }
 
 static const struct net_device_ops ax88772_netdev_ops = {
@@ -415,11 +538,87 @@ static const struct net_device_ops ax88772_netdev_ops = {
 	.ndo_set_rx_mode        = asix_set_multicast,
 };
 
+static void ax88772_suspend(struct usbnet *dev)
+{
+	struct asix_common_private *priv = dev->driver_priv;
+
+	/* Preserve BMCR for restoring */
+	priv->presvd_phy_bmcr =
+		asix_mdio_read_nopm(dev->net, dev->mii.phy_id, MII_BMCR);
+
+	/* Preserve ANAR for restoring */
+	priv->presvd_phy_advertise =
+		asix_mdio_read_nopm(dev->net, dev->mii.phy_id, MII_ADVERTISE);
+}
+
+static int asix_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	struct usbnet *dev = usb_get_intfdata(intf);
+	struct asix_common_private *priv = dev->driver_priv;
+
+	if (priv->suspend)
+		priv->suspend(dev);
+
+	return usbnet_suspend(intf, message);
+}
+
+static void ax88772_restore_phy(struct usbnet *dev)
+{
+	struct asix_common_private *priv = dev->driver_priv;
+
+	if (priv->presvd_phy_advertise) {
+		/* Restore Advertisement control reg */
+		asix_mdio_write_nopm(dev->net, dev->mii.phy_id, MII_ADVERTISE,
+				     priv->presvd_phy_advertise);
+
+		/* Restore BMCR */
+		asix_mdio_write_nopm(dev->net, dev->mii.phy_id, MII_BMCR,
+				     priv->presvd_phy_bmcr);
+
+		priv->presvd_phy_advertise = 0;
+		priv->presvd_phy_bmcr = 0;
+	}
+}
+
+static void ax88772_resume(struct usbnet *dev)
+{
+	int i;
+
+	for (i = 0; i < 3; i++)
+		if (!ax88772_hw_reset(dev, 1))
+			break;
+	ax88772_restore_phy(dev);
+}
+
+static void ax88772a_resume(struct usbnet *dev)
+{
+	int i;
+
+	for (i = 0; i < 3; i++) {
+		if (!ax88772a_hw_reset(dev, 1))
+			break;
+	}
+
+	ax88772_restore_phy(dev);
+}
+
+static int asix_resume(struct usb_interface *intf)
+{
+	struct usbnet *dev = usb_get_intfdata(intf);
+	struct asix_common_private *priv = dev->driver_priv;
+
+	if (priv->resume)
+		priv->resume(dev);
+
+	return usbnet_resume(intf);
+}
+
 static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
 {
-	int ret, embd_phy, i;
-	u8 buf[ETH_ALEN];
+	int ret, i;
+	u8 buf[ETH_ALEN], chipcode = 0;
 	u32 phyid;
+	struct asix_common_private *priv;
 
 	usbnet_get_endpoints(dev,intf);
 
@@ -427,13 +626,13 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
 	if (dev->driver_info->data & FLAG_EEPROM_MAC) {
 		for (i = 0; i < (ETH_ALEN >> 1); i++) {
 			ret = asix_read_cmd(dev, AX_CMD_READ_EEPROM, 0x04 + i,
-					0, 2, buf + i * 2);
+					    0, 2, buf + i * 2, 0);
 			if (ret < 0)
 				break;
 		}
 	} else {
 		ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID,
-				0, 0, ETH_ALEN, buf);
+				0, 0, ETH_ALEN, buf, 0);
 	}
 
 	if (ret < 0) {
@@ -456,16 +655,11 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
 	dev->net->needed_headroom = 4; /* cf asix_tx_fixup() */
 	dev->net->needed_tailroom = 4; /* cf asix_tx_fixup() */
 
-	embd_phy = ((dev->mii.phy_id & 0x1f) == 0x10 ? 1 : 0);
+	asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1, &chipcode, 0);
+	chipcode &= AX_CHIPCODE_MASK;
 
-	/* Reset the PHY to normal operation mode */
-	ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, embd_phy, 0, 0, NULL);
-	if (ret < 0) {
-		netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret);
-		return ret;
-	}
-
-	ax88772_reset(dev);
+	(chipcode == AX_AX88772_CHIPCODE) ? ax88772_hw_reset(dev, 0) :
+					    ax88772a_hw_reset(dev, 0);
 
 	/* Read PHYID register *AFTER* the PHY was reset properly */
 	phyid = asix_get_phyid(dev);
@@ -482,6 +676,18 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
 	if (!dev->driver_priv)
 		return -ENOMEM;
 
+	priv = dev->driver_priv;
+
+	priv->presvd_phy_bmcr = 0;
+	priv->presvd_phy_advertise = 0;
+	if (chipcode == AX_AX88772_CHIPCODE) {
+		priv->resume = ax88772_resume;
+		priv->suspend = ax88772_suspend;
+	} else {
+		priv->resume = ax88772a_resume;
+		priv->suspend = ax88772_suspend;
+	}
+
 	return 0;
 }
 
@@ -593,12 +799,12 @@ static int ax88178_reset(struct usbnet *dev)
 	int gpio0 = 0;
 	u32 phyid;
 
-	asix_read_cmd(dev, AX_CMD_READ_GPIOS, 0, 0, 1, &status);
+	asix_read_cmd(dev, AX_CMD_READ_GPIOS, 0, 0, 1, &status, 0);
 	netdev_dbg(dev->net, "GPIO Status: 0x%04x\n", status);
 
-	asix_write_cmd(dev, AX_CMD_WRITE_ENABLE, 0, 0, 0, NULL);
-	asix_read_cmd(dev, AX_CMD_READ_EEPROM, 0x0017, 0, 2, &eeprom);
-	asix_write_cmd(dev, AX_CMD_WRITE_DISABLE, 0, 0, 0, NULL);
+	asix_write_cmd(dev, AX_CMD_WRITE_ENABLE, 0, 0, 0, NULL, 0);
+	asix_read_cmd(dev, AX_CMD_READ_EEPROM, 0x0017, 0, 2, &eeprom, 0);
+	asix_write_cmd(dev, AX_CMD_WRITE_DISABLE, 0, 0, 0, NULL, 0);
 
 	netdev_dbg(dev->net, "EEPROM index 0x17 is 0x%04x\n", eeprom);
 
@@ -614,15 +820,16 @@ static int ax88178_reset(struct usbnet *dev)
 	netdev_dbg(dev->net, "GPIO0: %d, PhyMode: %d\n", gpio0, data->phymode);
 
 	/* Power up external GigaPHY through AX88178 GPIO pin */
-	asix_write_gpio(dev, AX_GPIO_RSE | AX_GPIO_GPO_1 | AX_GPIO_GPO1EN, 40);
+	asix_write_gpio(dev, AX_GPIO_RSE | AX_GPIO_GPO_1 |
+			AX_GPIO_GPO1EN, 40, 0);
 	if ((le16_to_cpu(eeprom) >> 8) != 1) {
-		asix_write_gpio(dev, 0x003c, 30);
-		asix_write_gpio(dev, 0x001c, 300);
-		asix_write_gpio(dev, 0x003c, 30);
+		asix_write_gpio(dev, 0x003c, 30, 0);
+		asix_write_gpio(dev, 0x001c, 300, 0);
+		asix_write_gpio(dev, 0x003c, 30, 0);
 	} else {
 		netdev_dbg(dev->net, "gpio phymode == 1 path\n");
-		asix_write_gpio(dev, AX_GPIO_GPO1EN, 30);
-		asix_write_gpio(dev, AX_GPIO_GPO1EN | AX_GPIO_GPO_1, 30);
+		asix_write_gpio(dev, AX_GPIO_GPO1EN, 30, 0);
+		asix_write_gpio(dev, AX_GPIO_GPO1EN | AX_GPIO_GPO_1, 30, 0);
 	}
 
 	/* Read PHYID register *AFTER* powering up PHY */
@@ -630,15 +837,15 @@ static int ax88178_reset(struct usbnet *dev)
 	netdev_dbg(dev->net, "PHYID=0x%08x\n", phyid);
 
 	/* Set AX88178 to enable MII/GMII/RGMII interface for external PHY */
-	asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, 0, 0, 0, NULL);
+	asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, 0, 0, 0, NULL, 0);
 
-	asix_sw_reset(dev, 0);
+	asix_sw_reset(dev, 0, 0);
 	msleep(150);
 
-	asix_sw_reset(dev, AX_SWRESET_PRL | AX_SWRESET_IPPD);
+	asix_sw_reset(dev, AX_SWRESET_PRL | AX_SWRESET_IPPD, 0);
 	msleep(150);
 
-	asix_write_rx_ctl(dev, 0);
+	asix_write_rx_ctl(dev, 0, 0);
 
 	if (data->phymode == PHY_MODE_MARVELL) {
 		marvell_phy_init(dev);
@@ -655,18 +862,18 @@ static int ax88178_reset(struct usbnet *dev)
 
 	mii_nway_restart(&dev->mii);
 
-	ret = asix_write_medium_mode(dev, AX88178_MEDIUM_DEFAULT);
+	ret = asix_write_medium_mode(dev, AX88178_MEDIUM_DEFAULT, 0);
 	if (ret < 0)
 		return ret;
 
 	/* Rewrite MAC address */
 	memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN);
 	ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
-							data->mac_addr);
+							data->mac_addr, 0);
 	if (ret < 0)
 		return ret;
 
-	ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL);
+	ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, 0);
 	if (ret < 0)
 		return ret;
 
@@ -704,7 +911,7 @@ static int ax88178_link_reset(struct usbnet *dev)
 	netdev_dbg(dev->net, "ax88178_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n",
 		   speed, ecmd.duplex, mode);
 
-	asix_write_medium_mode(dev, mode);
+	asix_write_medium_mode(dev, mode, 0);
 
 	if (data->phymode == PHY_MODE_MARVELL && data->ledmode)
 		marvell_led_status(dev, speed);
@@ -733,15 +940,15 @@ static void ax88178_set_mfb(struct usbnet *dev)
 		mfb = AX_RX_CTL_MFB_16384;
 	}
 
-	rxctl = asix_read_rx_ctl(dev);
-	asix_write_rx_ctl(dev, (rxctl & ~AX_RX_CTL_MFB_16384) | mfb);
+	rxctl = asix_read_rx_ctl(dev, 0);
+	asix_write_rx_ctl(dev, (rxctl & ~AX_RX_CTL_MFB_16384) | mfb, 0);
 
-	medium = asix_read_medium_status(dev);
+	medium = asix_read_medium_status(dev, 0);
 	if (dev->net->mtu > 1500)
 		medium |= AX_MEDIUM_JFE;
 	else
 		medium &= ~AX_MEDIUM_JFE;
-	asix_write_medium_mode(dev, medium);
+	asix_write_medium_mode(dev, medium, 0);
 
 	if (dev->rx_urb_size > old_rx_urb_size)
 		usbnet_unlink_rx_urbs(dev);
@@ -790,7 +997,7 @@ static int ax88178_bind(struct usbnet *dev, struct usb_interface *intf)
 	usbnet_get_endpoints(dev,intf);
 
 	/* Get the MAC address */
-	ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf);
+	ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf, 0);
 	if (ret < 0) {
 		netdev_dbg(dev->net, "Failed to read MAC address: %d\n", ret);
 		return ret;
@@ -811,10 +1018,10 @@ static int ax88178_bind(struct usbnet *dev, struct usb_interface *intf)
 	dev->net->ethtool_ops = &ax88178_ethtool_ops;
 
 	/* Blink LEDS so users know driver saw dongle */
-	asix_sw_reset(dev, 0);
+	asix_sw_reset(dev, 0, 0);
 	msleep(150);
 
-	asix_sw_reset(dev, AX_SWRESET_PRL | AX_SWRESET_IPPD);
+	asix_sw_reset(dev, AX_SWRESET_PRL | AX_SWRESET_IPPD, 0);
 	msleep(150);
 
 	/* Asix framing packs multiple eth frames into a 2K usb bulk transfer */
@@ -877,7 +1084,7 @@ static const struct driver_info ax88772_info = {
 	.unbind = ax88772_unbind,
 	.status = asix_status,
 	.link_reset = ax88772_link_reset,
-	.reset = ax88772_link_reset,
+	.reset = ax88772_reset,
 	.flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR | FLAG_MULTI_PACKET,
 	.rx_fixup = asix_rx_fixup_common,
 	.tx_fixup = asix_tx_fixup,
@@ -1005,7 +1212,7 @@ static const struct usb_device_id	products [] = {
 }, {
 	// Lenovo U2L100P 10/100
 	USB_DEVICE (0x17ef, 0x7203),
-	.driver_info = (unsigned long) &ax88772_info,
+	.driver_info = (unsigned long)&ax88772b_info,
 }, {
 	// ASIX AX88772B 10/100
 	USB_DEVICE (0x0b95, 0x772b),
@@ -1073,7 +1280,7 @@ static const struct usb_device_id	products [] = {
 }, {
 	// Asus USB Ethernet Adapter
 	USB_DEVICE (0x0b95, 0x7e2b),
-	.driver_info = (unsigned long) &ax88772_info,
+	.driver_info = (unsigned long)&ax88772b_info,
 }, {
 	/* ASIX 88172a demo board */
 	USB_DEVICE(0x0b95, 0x172a),
@@ -1095,8 +1302,8 @@ static struct usb_driver asix_driver = {
 	.name =		DRIVER_NAME,
 	.id_table =	products,
 	.probe =	usbnet_probe,
-	.suspend =	usbnet_suspend,
-	.resume =	usbnet_resume,
+	.suspend =	asix_suspend,
+	.resume =	asix_resume,
 	.disconnect =	usbnet_disconnect,
 	.supports_autosuspend = 1,
 	.disable_hub_initiated_lpm = 1,
diff --git a/drivers/net/usb/ax88172a.c b/drivers/net/usb/ax88172a.c
index 163a2c5..49a3bc1 100644
--- a/drivers/net/usb/ax88172a.c
+++ b/drivers/net/usb/ax88172a.c
@@ -81,7 +81,7 @@ static void ax88172a_adjust_link(struct net_device *netdev)
 	}
 
 	if (mode != priv->oldmode) {
-		asix_write_medium_mode(dev, mode);
+		asix_write_medium_mode(dev, mode, 0);
 		priv->oldmode = mode;
 		netdev_dbg(netdev, "speed %u duplex %d, setting mode to 0x%04x\n",
 			   phydev->speed, phydev->duplex, mode);
@@ -176,18 +176,19 @@ static int ax88172a_reset_phy(struct usbnet *dev, int embd_phy)
 {
 	int ret;
 
-	ret = asix_sw_reset(dev, AX_SWRESET_IPPD);
+	ret = asix_sw_reset(dev, AX_SWRESET_IPPD, 0);
 	if (ret < 0)
 		goto err;
 
 	msleep(150);
-	ret = asix_sw_reset(dev, AX_SWRESET_CLEAR);
+	ret = asix_sw_reset(dev, AX_SWRESET_CLEAR, 0);
 	if (ret < 0)
 		goto err;
 
 	msleep(150);
 
-	ret = asix_sw_reset(dev, embd_phy ? AX_SWRESET_IPRL : AX_SWRESET_IPPD);
+	ret = asix_sw_reset(dev, embd_phy ? AX_SWRESET_IPRL : AX_SWRESET_IPPD,
+			    0);
 	if (ret < 0)
 		goto err;
 
@@ -213,7 +214,7 @@ static int ax88172a_bind(struct usbnet *dev, struct usb_interface *intf)
 	dev->driver_priv = priv;
 
 	/* Get the MAC address */
-	ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf);
+	ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf, 0);
 	if (ret < 0) {
 		netdev_err(dev->net, "Failed to read MAC address: %d\n", ret);
 		goto free;
@@ -224,7 +225,7 @@ static int ax88172a_bind(struct usbnet *dev, struct usb_interface *intf)
 	dev->net->ethtool_ops = &ax88172a_ethtool_ops;
 
 	/* are we using the internal or the external phy? */
-	ret = asix_read_cmd(dev, AX_CMD_SW_PHY_STATUS, 0, 0, 1, buf);
+	ret = asix_read_cmd(dev, AX_CMD_SW_PHY_STATUS, 0, 0, 1, buf, 0);
 	if (ret < 0) {
 		netdev_err(dev->net, "Failed to read software interface selection register: %d\n",
 			   ret);
@@ -303,20 +304,20 @@ static int ax88172a_reset(struct usbnet *dev)
 	ax88172a_reset_phy(dev, priv->use_embdphy);
 
 	msleep(150);
-	rx_ctl = asix_read_rx_ctl(dev);
+	rx_ctl = asix_read_rx_ctl(dev, 0);
 	netdev_dbg(dev->net, "RX_CTL is 0x%04x after software reset\n", rx_ctl);
-	ret = asix_write_rx_ctl(dev, 0x0000);
+	ret = asix_write_rx_ctl(dev, 0x0000, 0);
 	if (ret < 0)
 		goto out;
 
-	rx_ctl = asix_read_rx_ctl(dev);
+	rx_ctl = asix_read_rx_ctl(dev, 0);
 	netdev_dbg(dev->net, "RX_CTL is 0x%04x setting to 0x0000\n", rx_ctl);
 
 	msleep(150);
 
 	ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0,
 			     AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT,
-			     AX88772_IPG2_DEFAULT, 0, NULL);
+			     AX88772_IPG2_DEFAULT, 0, NULL, 0);
 	if (ret < 0) {
 		netdev_err(dev->net, "Write IPG,IPG1,IPG2 failed: %d\n", ret);
 		goto out;
@@ -325,20 +326,20 @@ static int ax88172a_reset(struct usbnet *dev)
 	/* Rewrite MAC address */
 	memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN);
 	ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
-			     data->mac_addr);
+			     data->mac_addr, 0);
 	if (ret < 0)
 		goto out;
 
 	/* Set RX_CTL to default values with 2k buffer, and enable cactus */
-	ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL);
+	ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, 0);
 	if (ret < 0)
 		goto out;
 
-	rx_ctl = asix_read_rx_ctl(dev);
+	rx_ctl = asix_read_rx_ctl(dev, 0);
 	netdev_dbg(dev->net, "RX_CTL is 0x%04x after all initializations\n",
 		   rx_ctl);
 
-	rx_ctl = asix_read_medium_status(dev);
+	rx_ctl = asix_read_medium_status(dev, 0);
 	netdev_dbg(dev->net, "Medium Status is 0x%04x after all initializations\n",
 		   rx_ctl);
 
-- 
2.7.4

[PATCH v3 2/5] net: asix: Avoid looping when the device is disconnected

[robert.foss]

From: Vincent Palatin <vpalatin@chromium.org>

Check the answers from the USB stack and avoid re-sending multiple times
the request if the device has disappeared.

Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Signed-off-by: Robert Foss <robert.foss@collabora.com>
Tested-by: Robert Foss <robert.foss@collabora.com>
---
 drivers/net/usb/asix_common.c  | 56 +++++++++++++++++++++++++++++++++---------
 drivers/net/usb/asix_devices.c |  2 ++
 2 files changed, 46 insertions(+), 12 deletions(-)

diff --git a/drivers/net/usb/asix_common.c b/drivers/net/usb/asix_common.c
index 25609ee..f79eb12 100644
--- a/drivers/net/usb/asix_common.c
+++ b/drivers/net/usb/asix_common.c
@@ -428,13 +428,21 @@ int asix_mdio_read(struct net_device *netdev, int phy_id, int loc)
 	__le16 res;
 	u8 smsr;
 	int i = 0;
+	int ret;
 
 	mutex_lock(&dev->phy_mutex);
 	do {
-		asix_set_sw_mii(dev, 0);
+		ret = asix_set_sw_mii(dev, 0);
+		if (ret == -ENODEV)
+			break;
 		usleep_range(1000, 1100);
-		asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1, &smsr, 0);
-	} while (!(smsr & AX_HOST_EN) && (i++ < 30));
+		ret = asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG,
+				    0, 0, 1, &smsr, 0);
+	} while (!(smsr & AX_HOST_EN) && (i++ < 30) && (ret != -ENODEV));
+	if (ret == -ENODEV) {
+		mutex_unlock(&dev->phy_mutex);
+		return ret;
+	}
 
 	asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id,
 				(__u16)loc, 2, &res, 0);
@@ -453,16 +461,24 @@ void asix_mdio_write(struct net_device *netdev, int phy_id, int loc, int val)
 	__le16 res = cpu_to_le16(val);
 	u8 smsr;
 	int i = 0;
+	int ret;
 
 	netdev_dbg(dev->net, "asix_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n",
 			phy_id, loc, val);
 
 	mutex_lock(&dev->phy_mutex);
 	do {
-		asix_set_sw_mii(dev, 0);
+		ret = asix_set_sw_mii(dev, 0);
+		if (ret == -ENODEV)
+			break;
 		usleep_range(1000, 1100);
-		asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1, &smsr, 0);
-	} while (!(smsr & AX_HOST_EN) && (i++ < 30));
+		ret = asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG,
+				    0, 0, 1, &smsr, 0);
+	} while (!(smsr & AX_HOST_EN) && (i++ < 30) && (ret != -ENODEV));
+	if (ret == -ENODEV) {
+		mutex_unlock(&dev->phy_mutex);
+		return;
+	}
 
 	asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id,
 		       (__u16)loc, 2, &res, 0);
@@ -476,13 +492,21 @@ int asix_mdio_read_nopm(struct net_device *netdev, int phy_id, int loc)
 	__le16 res;
 	u8 smsr;
 	int i = 0;
+	int ret;
 
 	mutex_lock(&dev->phy_mutex);
 	do {
-		asix_set_sw_mii(dev, 1);
+		ret = asix_set_sw_mii(dev, 1);
+		if (ret == -ENODEV)
+			break;
 		usleep_range(1000, 1100);
-		asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1, &smsr, 1);
-	} while (!(smsr & AX_HOST_EN) && (i++ < 30));
+		ret = asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG,
+				    0, 0, 1, &smsr, 1);
+	} while (!(smsr & AX_HOST_EN) && (i++ < 30) && (ret != -ENODEV));
+	if (ret == -ENODEV) {
+		mutex_unlock(&dev->phy_mutex);
+		return ret;
+	}
 
 	asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id,
 		      (__u16)loc, 2, &res, 1);
@@ -502,16 +526,24 @@ asix_mdio_write_nopm(struct net_device *netdev, int phy_id, int loc, int val)
 	__le16 res = cpu_to_le16(val);
 	u8 smsr;
 	int i = 0;
+	int ret;
 
 	netdev_dbg(dev->net, "asix_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n",
 			phy_id, loc, val);
 
 	mutex_lock(&dev->phy_mutex);
 	do {
-		asix_set_sw_mii(dev, 1);
+		ret = asix_set_sw_mii(dev, 1);
+		if (ret == -ENODEV)
+			break;
 		usleep_range(1000, 1100);
-		asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1, &smsr, 1);
-	} while (!(smsr & AX_HOST_EN) && (i++ < 30));
+		ret = asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG,
+				    0, 0, 1, &smsr, 1);
+	} while (!(smsr & AX_HOST_EN) && (i++ < 30) && (ret != -ENODEV));
+	if (ret == -ENODEV) {
+		mutex_unlock(&dev->phy_mutex);
+		return;
+	}
 
 	asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id,
 		       (__u16)loc, 2, &res, 1);
diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
index aaa4290..ebeb730 100644
--- a/drivers/net/usb/asix_devices.c
+++ b/drivers/net/usb/asix_devices.c
@@ -79,6 +79,8 @@ static u32 asix_get_phyid(struct usbnet *dev)
 	/* Poll for the rare case the FW or phy isn't ready yet.  */
 	for (i = 0; i < 100; i++) {
 		phy_reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID1);
+		if (phy_reg < 0)
+			return 0;
 		if (phy_reg != 0 && phy_reg != 0xFFFF)
 			break;
 		mdelay(1);
-- 
2.7.4

[PATCH v3 3/5] net: asix: Fix AX88772x resume failures

[robert.foss]

From: Allan Chou <allan@asix.com.tw>

The change fixes AX88772x resume failure by
- Restore incorrect AX88772A PHY registers when resetting
- Need to stop MAC operation when suspending
- Need to restart MII when restoring PHY

Signed-off-by: Allan Chou <allan@asix.com.tw>
Signed-off-by: Robert Foss <robert.foss@collabora.com>
Tested-by: Robert Foss <robert.foss@collabora.com>
---
 drivers/net/usb/asix_devices.c | 47 +++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 46 insertions(+), 1 deletion(-)

diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
index ebeb730..083dc2e 100644
--- a/drivers/net/usb/asix_devices.c
+++ b/drivers/net/usb/asix_devices.c
@@ -35,6 +35,15 @@
 
 #define	PHY_MODE_RTL8211CL	0x000C
 
+#define AX88772A_PHY14H		0x14
+#define AX88772A_PHY14H_DEFAULT 0x442C
+
+#define AX88772A_PHY15H		0x15
+#define AX88772A_PHY15H_DEFAULT 0x03C8
+
+#define AX88772A_PHY16H		0x16
+#define AX88772A_PHY16H_DEFAULT 0x4044
+
 struct ax88172_int_data {
 	__le16 res1;
 	u8 link;
@@ -424,7 +433,7 @@ static int ax88772a_hw_reset(struct usbnet *dev, int in_pm)
 {
 	struct asix_data *data = (struct asix_data *)&dev->data;
 	int ret, embd_phy;
-	u16 rx_ctl;
+	u16 rx_ctl, phy14h, phy15h, phy16h;
 	u8 chipcode = 0;
 
 	ret = asix_write_gpio(dev, AX_GPIO_RSE, 5, in_pm);
@@ -482,6 +491,32 @@ static int ax88772a_hw_reset(struct usbnet *dev, int in_pm)
 				   ret);
 			goto out;
 		}
+	} else if ((chipcode & AX_CHIPCODE_MASK) == AX_AX88772A_CHIPCODE) {
+		/* Check if the PHY registers have default settings */
+		phy14h = asix_mdio_read_nopm(dev->net, dev->mii.phy_id,
+					     AX88772A_PHY14H);
+		phy15h = asix_mdio_read_nopm(dev->net, dev->mii.phy_id,
+					     AX88772A_PHY15H);
+		phy16h = asix_mdio_read_nopm(dev->net, dev->mii.phy_id,
+					     AX88772A_PHY16H);
+
+		netdev_dbg(dev->net,
+			   "772a_hw_reset: MR20=0x%x MR21=0x%x MR22=0x%x\n",
+			   phy14h, phy15h, phy16h);
+
+		/* Restore PHY registers default setting if not */
+		if (phy14h != AX88772A_PHY14H_DEFAULT)
+			asix_mdio_write_nopm(dev->net, dev->mii.phy_id,
+					     AX88772A_PHY14H,
+					     AX88772A_PHY14H_DEFAULT);
+		if (phy15h != AX88772A_PHY15H_DEFAULT)
+			asix_mdio_write_nopm(dev->net, dev->mii.phy_id,
+					     AX88772A_PHY15H,
+					     AX88772A_PHY15H_DEFAULT);
+		if (phy16h != AX88772A_PHY16H_DEFAULT)
+			asix_mdio_write_nopm(dev->net, dev->mii.phy_id,
+					     AX88772A_PHY16H,
+					     AX88772A_PHY16H_DEFAULT);
 	}
 
 	ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0,
@@ -543,6 +578,15 @@ static const struct net_device_ops ax88772_netdev_ops = {
 static void ax88772_suspend(struct usbnet *dev)
 {
 	struct asix_common_private *priv = dev->driver_priv;
+	u16 medium;
+
+	/* Stop MAC operation */
+	medium = asix_read_medium_status(dev, 0);
+	medium &= ~AX_MEDIUM_RE;
+	asix_write_medium_mode(dev, medium, 0);
+
+	netdev_dbg(dev->net, "ax88772_suspend: medium=0x%04x\n",
+		   asix_read_medium_status(dev, 0));
 
 	/* Preserve BMCR for restoring */
 	priv->presvd_phy_bmcr =
@@ -577,6 +621,7 @@ static void ax88772_restore_phy(struct usbnet *dev)
 		asix_mdio_write_nopm(dev->net, dev->mii.phy_id, MII_BMCR,
 				     priv->presvd_phy_bmcr);
 
+		mii_nway_restart(&dev->mii);
 		priv->presvd_phy_advertise = 0;
 		priv->presvd_phy_bmcr = 0;
 	}
-- 
2.7.4

[PATCH v3 4/5] net: asix: see 802.3 spec for phy reset

[robert.foss]

From: Grant Grundler <grundler@chromium.org>

        https://lkml.org/lkml/2014/11/11/947

Ben Hutchings is correct. IEEE 802.3 spec section "22.2.4.1.1 Reset" requires
up to 500ms delay. Mitigate the "max" delay by polling the phy until BCM_RESET
bit is clear.

Signed-off-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: Robert Foss <robert.foss@collabora.com>
Tested-by: Robert Foss <robert.foss@collabora.com>
---
 drivers/net/usb/asix_devices.c | 27 ++++++++++++++++++++++++---
 1 file changed, 24 insertions(+), 3 deletions(-)

diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
index 083dc2e..dbcdda2 100644
--- a/drivers/net/usb/asix_devices.c
+++ b/drivers/net/usb/asix_devices.c
@@ -212,6 +212,28 @@ static const struct net_device_ops ax88172_netdev_ops = {
 	.ndo_set_rx_mode	= ax88172_set_multicast,
 };
 
+static void asix_phy_reset(struct usbnet *dev, unsigned int reset_bits)
+{
+	unsigned int timeout = 5000;
+
+	asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, reset_bits);
+
+	/* give phy_id a chance to process reset */
+	udelay(500);
+
+	/* See IEEE 802.3 "22.2.4.1.1 Reset": 500ms max */
+	while (timeout--) {
+		if (asix_mdio_read(dev->net, dev->mii.phy_id, MII_BMCR)
+							& BMCR_RESET)
+			udelay(100);
+		else
+			return;
+	}
+
+	netdev_err(dev->net, "BMCR_RESET timeout on phy_id %d\n",
+		   dev->mii.phy_id);
+}
+
 static int ax88172_bind(struct usbnet *dev, struct usb_interface *intf)
 {
 	int ret = 0;
@@ -258,7 +280,7 @@ static int ax88172_bind(struct usbnet *dev, struct usb_interface *intf)
 	dev->net->needed_headroom = 4; /* cf asix_tx_fixup() */
 	dev->net->needed_tailroom = 4; /* cf asix_tx_fixup() */
 
-	asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
+	asix_phy_reset(dev, BMCR_RESET);
 	asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
 		ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
 	mii_nway_restart(&dev->mii);
@@ -900,8 +922,7 @@ static int ax88178_reset(struct usbnet *dev)
 	} else if (data->phymode == PHY_MODE_RTL8211CL)
 		rtl8211cl_phy_init(dev);
 
-	asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR,
-			BMCR_RESET | BMCR_ANENABLE);
+	asix_phy_reset(dev, BMCR_RESET | BMCR_ANENABLE);
 	asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
 			ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
 	asix_mdio_write(dev->net, dev->mii.phy_id, MII_CTRL1000,
-- 
2.7.4

[PATCH v3 5/5] net: asix: autoneg will set WRITE_MEDIUM reg

[robert.foss]

From: Grant Grundler <grundler@chromium.org>

The miii_nway_restart() causes a PHY link change activity and
ax88772_link_reset will be called. link_reset will set
AX_CMD_WRITE_MEDIUM_MODE register correctly.

The asix_write_medium_mode in reset() fills in a default value to the register
which may be different from the negotiation result. So do this first.

Ignore the ret value since it's ignored in XXX_link_reset() functions.

Signed-off-by: Grant Grundler <grundler@google.com>
Signed-off-by: Robert Foss <robert.foss@collabora.com>
Tested-by: Robert Foss <robert.foss@collabora.com>
---
 drivers/net/usb/asix_devices.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
index dbcdda2..cce2495 100644
--- a/drivers/net/usb/asix_devices.c
+++ b/drivers/net/usb/asix_devices.c
@@ -928,12 +928,9 @@ static int ax88178_reset(struct usbnet *dev)
 	asix_mdio_write(dev->net, dev->mii.phy_id, MII_CTRL1000,
 			ADVERTISE_1000FULL);
 
+	asix_write_medium_mode(dev, AX88178_MEDIUM_DEFAULT, 0);
 	mii_nway_restart(&dev->mii);
 
-	ret = asix_write_medium_mode(dev, AX88178_MEDIUM_DEFAULT, 0);
-	if (ret < 0)
-		return ret;
-
 	/* Rewrite MAC address */
 	memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN);
 	ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
-- 
2.7.4

Re: [PATCH v3 0/5] net/usb: asix driver improvements

[David Miller]

Networking patch series need to be submitted to netdev@vger.kernel.org

Thank you.

[PATCH v3 1/5] net: asix: Add in_pm parameter

[robert.foss]

From: Robert Foss <robert.foss@collabora.com>

From: Freddy Xin <freddy@asix.com.tw>

In order to R/W registers in suspend/resume functions, in_pm flags are
added to some functions to determine whether the nopm version of usb
functions is called.

Save BMCR and ANAR PHY registers in suspend function and restore them
in resume function.

Reset HW in resume function to ensure the PHY works correctly.

Signed-off-by: Freddy Xin <freddy@asix.com.tw>
Signed-off-by: Robert Foss <robert.foss@collabora.com>
Tested-by: Robert Foss <robert.foss@collabora.com>
---
 drivers/net/usb/asix.h         |  40 +++-
 drivers/net/usb/asix_common.c  | 180 ++++++++++++----
 drivers/net/usb/asix_devices.c | 373 ++++++++++++++++++++++++++--------
 drivers/net/usb/ax88172a.c     |  29 +--
 4 files changed, 472 insertions(+), 150 deletions(-)

diff --git a/drivers/net/usb/asix.h b/drivers/net/usb/asix.h
index a2d3ea6..d109242 100644
--- a/drivers/net/usb/asix.h
+++ b/drivers/net/usb/asix.h
@@ -46,6 +46,7 @@
 #define AX_CMD_SET_SW_MII		0x06
 #define AX_CMD_READ_MII_REG		0x07
 #define AX_CMD_WRITE_MII_REG		0x08
+#define AX_CMD_STATMNGSTS_REG		0x09
 #define AX_CMD_SET_HW_MII		0x0a
 #define AX_CMD_READ_EEPROM		0x0b
 #define AX_CMD_WRITE_EEPROM		0x0c
@@ -71,6 +72,17 @@
 #define AX_CMD_SW_RESET			0x20
 #define AX_CMD_SW_PHY_STATUS		0x21
 #define AX_CMD_SW_PHY_SELECT		0x22
+#define AX_QCTCTRL			0x2A
+
+#define AX_CHIPCODE_MASK		0x70
+#define AX_AX88772_CHIPCODE		0x00
+#define AX_AX88772A_CHIPCODE		0x10
+#define AX_AX88772B_CHIPCODE		0x20
+#define AX_HOST_EN			0x01
+
+#define AX_PHYSEL_PSEL			0x01
+#define AX_PHYSEL_SSMII			0
+#define AX_PHYSEL_SSEN			0x10
 
 #define AX_PHY_SELECT_MASK		(BIT(3) | BIT(2))
 #define AX_PHY_SELECT_INTERNAL		0
@@ -173,6 +185,10 @@ struct asix_rx_fixup_info {
 };
 
 struct asix_common_private {
+	void (*resume)(struct usbnet *dev);
+	void (*suspend)(struct usbnet *dev);
+	u16 presvd_phy_advertise;
+	u16 presvd_phy_bmcr;
 	struct asix_rx_fixup_info rx_fixup_info;
 };
 
@@ -182,10 +198,10 @@ extern const struct driver_info ax88172a_info;
 #define FLAG_EEPROM_MAC		(1UL << 0)  /* init device MAC from eeprom */
 
 int asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
-		  u16 size, void *data);
+		  u16 size, void *data, int in_pm);
 
 int asix_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
-		   u16 size, void *data);
+		   u16 size, void *data, int in_pm);
 
 void asix_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value,
 			  u16 index, u16 size, void *data);
@@ -197,27 +213,31 @@ int asix_rx_fixup_common(struct usbnet *dev, struct sk_buff *skb);
 struct sk_buff *asix_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
 			      gfp_t flags);
 
-int asix_set_sw_mii(struct usbnet *dev);
-int asix_set_hw_mii(struct usbnet *dev);
+int asix_set_sw_mii(struct usbnet *dev, int in_pm);
+int asix_set_hw_mii(struct usbnet *dev, int in_pm);
 
 int asix_read_phy_addr(struct usbnet *dev, int internal);
 int asix_get_phy_addr(struct usbnet *dev);
 
-int asix_sw_reset(struct usbnet *dev, u8 flags);
+int asix_sw_reset(struct usbnet *dev, u8 flags, int in_pm);
 
-u16 asix_read_rx_ctl(struct usbnet *dev);
-int asix_write_rx_ctl(struct usbnet *dev, u16 mode);
+u16 asix_read_rx_ctl(struct usbnet *dev, int in_pm);
+int asix_write_rx_ctl(struct usbnet *dev, u16 mode, int in_pm);
 
-u16 asix_read_medium_status(struct usbnet *dev);
-int asix_write_medium_mode(struct usbnet *dev, u16 mode);
+u16 asix_read_medium_status(struct usbnet *dev, int in_pm);
+int asix_write_medium_mode(struct usbnet *dev, u16 mode, int in_pm);
 
-int asix_write_gpio(struct usbnet *dev, u16 value, int sleep);
+int asix_write_gpio(struct usbnet *dev, u16 value, int sleep, int in_pm);
 
 void asix_set_multicast(struct net_device *net);
 
 int asix_mdio_read(struct net_device *netdev, int phy_id, int loc);
 void asix_mdio_write(struct net_device *netdev, int phy_id, int loc, int val);
 
+int asix_mdio_read_nopm(struct net_device *netdev, int phy_id, int loc);
+void asix_mdio_write_nopm(struct net_device *netdev, int phy_id, int loc,
+			  int val);
+
 void asix_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo);
 int asix_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo);
 
diff --git a/drivers/net/usb/asix_common.c b/drivers/net/usb/asix_common.c
index 7de5ab5..25609ee 100644
--- a/drivers/net/usb/asix_common.c
+++ b/drivers/net/usb/asix_common.c
@@ -22,24 +22,49 @@
 #include "asix.h"
 
 int asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
-		  u16 size, void *data)
+		  u16 size, void *data, int in_pm)
 {
 	int ret;
-	ret = usbnet_read_cmd(dev, cmd,
-			       USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-			       value, index, data, size);
+	int (*fn)(struct usbnet *, u8, u8, u16, u16, void *, u16);
+
+	BUG_ON(!dev);
+
+	if (!in_pm)
+		fn = usbnet_read_cmd;
+	else
+		fn = usbnet_read_cmd_nopm;
+
+	ret = fn(dev, cmd, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+		 value, index, data, size);
+
+	if (unlikely(ret < 0))
+		netdev_warn(dev->net, "Failed to read reg index 0x%04x: %d\n",
+			    index, ret);
 
-	if (ret != size && ret >= 0)
-		return -EINVAL;
 	return ret;
 }
 
 int asix_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
-		   u16 size, void *data)
+		   u16 size, void *data, int in_pm)
 {
-	return usbnet_write_cmd(dev, cmd,
-				USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-				value, index, data, size);
+	int ret;
+	int (*fn)(struct usbnet *, u8, u8, u16, u16, const void *, u16);
+
+	BUG_ON(!dev);
+
+	if (!in_pm)
+		fn = usbnet_write_cmd;
+	else
+		fn = usbnet_write_cmd_nopm;
+
+	ret = fn(dev, cmd, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+		 value, index, data, size);
+
+	if (unlikely(ret < 0))
+		netdev_warn(dev->net, "Failed to write reg index 0x%04x: %d\n",
+			    index, ret);
+
+	return ret;
 }
 
 void asix_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index,
@@ -225,19 +250,20 @@ struct sk_buff *asix_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
 	return skb;
 }
 
-int asix_set_sw_mii(struct usbnet *dev)
+int asix_set_sw_mii(struct usbnet *dev, int in_pm)
 {
 	int ret;
-	ret = asix_write_cmd(dev, AX_CMD_SET_SW_MII, 0x0000, 0, 0, NULL);
+	ret = asix_write_cmd(dev, AX_CMD_SET_SW_MII, 0x0000, 0, 0, NULL, in_pm);
+
 	if (ret < 0)
 		netdev_err(dev->net, "Failed to enable software MII access\n");
 	return ret;
 }
 
-int asix_set_hw_mii(struct usbnet *dev)
+int asix_set_hw_mii(struct usbnet *dev, int in_pm)
 {
 	int ret;
-	ret = asix_write_cmd(dev, AX_CMD_SET_HW_MII, 0x0000, 0, 0, NULL);
+	ret = asix_write_cmd(dev, AX_CMD_SET_HW_MII, 0x0000, 0, 0, NULL, in_pm);
 	if (ret < 0)
 		netdev_err(dev->net, "Failed to enable hardware MII access\n");
 	return ret;
@@ -247,7 +273,7 @@ int asix_read_phy_addr(struct usbnet *dev, int internal)
 {
 	int offset = (internal ? 1 : 0);
 	u8 buf[2];
-	int ret = asix_read_cmd(dev, AX_CMD_READ_PHY_ID, 0, 0, 2, buf);
+	int ret = asix_read_cmd(dev, AX_CMD_READ_PHY_ID, 0, 0, 2, buf, 0);
 
 	netdev_dbg(dev->net, "asix_get_phy_addr()\n");
 
@@ -270,21 +296,21 @@ int asix_get_phy_addr(struct usbnet *dev)
 }
 
 
-int asix_sw_reset(struct usbnet *dev, u8 flags)
+int asix_sw_reset(struct usbnet *dev, u8 flags, int in_pm)
 {
 	int ret;
 
-        ret = asix_write_cmd(dev, AX_CMD_SW_RESET, flags, 0, 0, NULL);
+	ret = asix_write_cmd(dev, AX_CMD_SW_RESET, flags, 0, 0, NULL, in_pm);
 	if (ret < 0)
 		netdev_err(dev->net, "Failed to send software reset: %02x\n", ret);
 
 	return ret;
 }
 
-u16 asix_read_rx_ctl(struct usbnet *dev)
+u16 asix_read_rx_ctl(struct usbnet *dev, int in_pm)
 {
 	__le16 v;
-	int ret = asix_read_cmd(dev, AX_CMD_READ_RX_CTL, 0, 0, 2, &v);
+	int ret = asix_read_cmd(dev, AX_CMD_READ_RX_CTL, 0, 0, 2, &v, in_pm);
 
 	if (ret < 0) {
 		netdev_err(dev->net, "Error reading RX_CTL register: %02x\n", ret);
@@ -295,12 +321,12 @@ out:
 	return ret;
 }
 
-int asix_write_rx_ctl(struct usbnet *dev, u16 mode)
+int asix_write_rx_ctl(struct usbnet *dev, u16 mode, int in_pm)
 {
 	int ret;
 
 	netdev_dbg(dev->net, "asix_write_rx_ctl() - mode = 0x%04x\n", mode);
-	ret = asix_write_cmd(dev, AX_CMD_WRITE_RX_CTL, mode, 0, 0, NULL);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_RX_CTL, mode, 0, 0, NULL, in_pm);
 	if (ret < 0)
 		netdev_err(dev->net, "Failed to write RX_CTL mode to 0x%04x: %02x\n",
 			   mode, ret);
@@ -308,10 +334,11 @@ int asix_write_rx_ctl(struct usbnet *dev, u16 mode)
 	return ret;
 }
 
-u16 asix_read_medium_status(struct usbnet *dev)
+u16 asix_read_medium_status(struct usbnet *dev, int in_pm)
 {
 	__le16 v;
-	int ret = asix_read_cmd(dev, AX_CMD_READ_MEDIUM_STATUS, 0, 0, 2, &v);
+	int ret = asix_read_cmd(dev, AX_CMD_READ_MEDIUM_STATUS,
+				0, 0, 2, &v, in_pm);
 
 	if (ret < 0) {
 		netdev_err(dev->net, "Error reading Medium Status register: %02x\n",
@@ -323,12 +350,13 @@ u16 asix_read_medium_status(struct usbnet *dev)
 
 }
 
-int asix_write_medium_mode(struct usbnet *dev, u16 mode)
+int asix_write_medium_mode(struct usbnet *dev, u16 mode, int in_pm)
 {
 	int ret;
 
 	netdev_dbg(dev->net, "asix_write_medium_mode() - mode = 0x%04x\n", mode);
-	ret = asix_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE,
+			     mode, 0, 0, NULL, in_pm);
 	if (ret < 0)
 		netdev_err(dev->net, "Failed to write Medium Mode mode to 0x%04x: %02x\n",
 			   mode, ret);
@@ -336,12 +364,12 @@ int asix_write_medium_mode(struct usbnet *dev, u16 mode)
 	return ret;
 }
 
-int asix_write_gpio(struct usbnet *dev, u16 value, int sleep)
+int asix_write_gpio(struct usbnet *dev, u16 value, int sleep, int in_pm)
 {
 	int ret;
 
 	netdev_dbg(dev->net, "asix_write_gpio() - value = 0x%04x\n", value);
-	ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS, value, 0, 0, NULL);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS, value, 0, 0, NULL, in_pm);
 	if (ret < 0)
 		netdev_err(dev->net, "Failed to write GPIO value 0x%04x: %02x\n",
 			   value, ret);
@@ -398,16 +426,23 @@ int asix_mdio_read(struct net_device *netdev, int phy_id, int loc)
 {
 	struct usbnet *dev = netdev_priv(netdev);
 	__le16 res;
+	u8 smsr;
+	int i = 0;
 
 	mutex_lock(&dev->phy_mutex);
-	asix_set_sw_mii(dev);
+	do {
+		asix_set_sw_mii(dev, 0);
+		usleep_range(1000, 1100);
+		asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1, &smsr, 0);
+	} while (!(smsr & AX_HOST_EN) && (i++ < 30));
+
 	asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id,
-				(__u16)loc, 2, &res);
-	asix_set_hw_mii(dev);
+				(__u16)loc, 2, &res, 0);
+	asix_set_hw_mii(dev, 0);
 	mutex_unlock(&dev->phy_mutex);
 
 	netdev_dbg(dev->net, "asix_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n",
-		   phy_id, loc, le16_to_cpu(res));
+			phy_id, loc, le16_to_cpu(res));
 
 	return le16_to_cpu(res);
 }
@@ -416,13 +451,71 @@ void asix_mdio_write(struct net_device *netdev, int phy_id, int loc, int val)
 {
 	struct usbnet *dev = netdev_priv(netdev);
 	__le16 res = cpu_to_le16(val);
+	u8 smsr;
+	int i = 0;
 
 	netdev_dbg(dev->net, "asix_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n",
-		   phy_id, loc, val);
+			phy_id, loc, val);
+
+	mutex_lock(&dev->phy_mutex);
+	do {
+		asix_set_sw_mii(dev, 0);
+		usleep_range(1000, 1100);
+		asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1, &smsr, 0);
+	} while (!(smsr & AX_HOST_EN) && (i++ < 30));
+
+	asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id,
+		       (__u16)loc, 2, &res, 0);
+	asix_set_hw_mii(dev, 0);
+	mutex_unlock(&dev->phy_mutex);
+}
+
+int asix_mdio_read_nopm(struct net_device *netdev, int phy_id, int loc)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	__le16 res;
+	u8 smsr;
+	int i = 0;
+
+	mutex_lock(&dev->phy_mutex);
+	do {
+		asix_set_sw_mii(dev, 1);
+		usleep_range(1000, 1100);
+		asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1, &smsr, 1);
+	} while (!(smsr & AX_HOST_EN) && (i++ < 30));
+
+	asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id,
+		      (__u16)loc, 2, &res, 1);
+	asix_set_hw_mii(dev, 1);
+	mutex_unlock(&dev->phy_mutex);
+
+	netdev_dbg(dev->net, "asix_mdio_read_nopm() phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n",
+			phy_id, loc, le16_to_cpu(res));
+
+	return le16_to_cpu(res);
+}
+
+void
+asix_mdio_write_nopm(struct net_device *netdev, int phy_id, int loc, int val)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	__le16 res = cpu_to_le16(val);
+	u8 smsr;
+	int i = 0;
+
+	netdev_dbg(dev->net, "asix_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n",
+			phy_id, loc, val);
+
 	mutex_lock(&dev->phy_mutex);
-	asix_set_sw_mii(dev);
-	asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id, (__u16)loc, 2, &res);
-	asix_set_hw_mii(dev);
+	do {
+		asix_set_sw_mii(dev, 1);
+		usleep_range(1000, 1100);
+		asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1, &smsr, 1);
+	} while (!(smsr & AX_HOST_EN) && (i++ < 30));
+
+	asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id,
+		       (__u16)loc, 2, &res, 1);
+	asix_set_hw_mii(dev, 1);
 	mutex_unlock(&dev->phy_mutex);
 }
 
@@ -431,7 +524,8 @@ void asix_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
 	struct usbnet *dev = netdev_priv(net);
 	u8 opt;
 
-	if (asix_read_cmd(dev, AX_CMD_READ_MONITOR_MODE, 0, 0, 1, &opt) < 0) {
+	if (asix_read_cmd(dev, AX_CMD_READ_MONITOR_MODE,
+			  0, 0, 1, &opt, 0) < 0) {
 		wolinfo->supported = 0;
 		wolinfo->wolopts = 0;
 		return;
@@ -455,7 +549,7 @@ int asix_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
 		opt |= AX_MONITOR_MAGIC;
 
 	if (asix_write_cmd(dev, AX_CMD_WRITE_MONITOR_MODE,
-			      opt, 0, 0, NULL) < 0)
+			      opt, 0, 0, NULL, 0) < 0)
 		return -EINVAL;
 
 	return 0;
@@ -490,7 +584,7 @@ int asix_get_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
 	/* ax8817x returns 2 bytes from eeprom on read */
 	for (i = first_word; i <= last_word; i++) {
 		if (asix_read_cmd(dev, AX_CMD_READ_EEPROM, i, 0, 2,
-				  &(eeprom_buff[i - first_word])) < 0) {
+				  &eeprom_buff[i - first_word], 0) < 0) {
 			kfree(eeprom_buff);
 			return -EIO;
 		}
@@ -531,7 +625,7 @@ int asix_set_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
 	   the EEPROM */
 	if (eeprom->offset & 1) {
 		ret = asix_read_cmd(dev, AX_CMD_READ_EEPROM, first_word, 0, 2,
-				    &(eeprom_buff[0]));
+				    &eeprom_buff[0], 0);
 		if (ret < 0) {
 			netdev_err(net, "Failed to read EEPROM at offset 0x%02x.\n", first_word);
 			goto free;
@@ -540,7 +634,7 @@ int asix_set_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
 
 	if ((eeprom->offset + eeprom->len) & 1) {
 		ret = asix_read_cmd(dev, AX_CMD_READ_EEPROM, last_word, 0, 2,
-				    &(eeprom_buff[last_word - first_word]));
+				    &eeprom_buff[last_word - first_word], 0);
 		if (ret < 0) {
 			netdev_err(net, "Failed to read EEPROM at offset 0x%02x.\n", last_word);
 			goto free;
@@ -550,7 +644,7 @@ int asix_set_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
 	memcpy((u8 *)eeprom_buff + (eeprom->offset & 1), data, eeprom->len);
 
 	/* write data to EEPROM */
-	ret = asix_write_cmd(dev, AX_CMD_WRITE_ENABLE, 0x0000, 0, 0, NULL);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_ENABLE, 0x0000, 0, 0, NULL, 0);
 	if (ret < 0) {
 		netdev_err(net, "Failed to enable EEPROM write\n");
 		goto free;
@@ -561,7 +655,7 @@ int asix_set_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
 		netdev_dbg(net, "write to EEPROM at offset 0x%02x, data 0x%04x\n",
 			   i, eeprom_buff[i - first_word]);
 		ret = asix_write_cmd(dev, AX_CMD_WRITE_EEPROM, i,
-				     eeprom_buff[i - first_word], 0, NULL);
+				     eeprom_buff[i - first_word], 0, NULL, 0);
 		if (ret < 0) {
 			netdev_err(net, "Failed to write EEPROM at offset 0x%02x.\n",
 				   i);
@@ -570,7 +664,7 @@ int asix_set_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
 		msleep(20);
 	}
 
-	ret = asix_write_cmd(dev, AX_CMD_WRITE_DISABLE, 0x0000, 0, 0, NULL);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_DISABLE, 0x0000, 0, 0, NULL, 0);
 	if (ret < 0) {
 		netdev_err(net, "Failed to disable EEPROM write\n");
 		goto free;
diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
index 5cabefc..aaa4290 100644
--- a/drivers/net/usb/asix_devices.c
+++ b/drivers/net/usb/asix_devices.c
@@ -184,7 +184,7 @@ static int ax88172_link_reset(struct usbnet *dev)
 	netdev_dbg(dev->net, "ax88172_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n",
 		   ethtool_cmd_speed(&ecmd), ecmd.duplex, mode);
 
-	asix_write_medium_mode(dev, mode);
+	asix_write_medium_mode(dev, mode, 0);
 
 	return 0;
 }
@@ -213,18 +213,19 @@ static int ax88172_bind(struct usbnet *dev, struct usb_interface *intf)
 	/* Toggle the GPIOs in a manufacturer/model specific way */
 	for (i = 2; i >= 0; i--) {
 		ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS,
-				(gpio_bits >> (i * 8)) & 0xff, 0, 0, NULL);
+				(gpio_bits >> (i * 8)) & 0xff, 0, 0, NULL, 0);
 		if (ret < 0)
 			goto out;
 		msleep(5);
 	}
 
-	ret = asix_write_rx_ctl(dev, 0x80);
+	ret = asix_write_rx_ctl(dev, 0x80, 0);
 	if (ret < 0)
 		goto out;
 
 	/* Get the MAC address */
-	ret = asix_read_cmd(dev, AX88172_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf);
+	ret = asix_read_cmd(dev, AX88172_CMD_READ_NODE_ID,
+			    0, 0, ETH_ALEN, buf, 0);
 	if (ret < 0) {
 		netdev_dbg(dev->net, "read AX_CMD_READ_NODE_ID failed: %d\n",
 			   ret);
@@ -290,7 +291,7 @@ static int ax88772_link_reset(struct usbnet *dev)
 	netdev_dbg(dev->net, "ax88772_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n",
 		   ethtool_cmd_speed(&ecmd), ecmd.duplex, mode);
 
-	asix_write_medium_mode(dev, mode);
+	asix_write_medium_mode(dev, mode, 0);
 
 	return 0;
 }
@@ -298,78 +299,192 @@ static int ax88772_link_reset(struct usbnet *dev)
 static int ax88772_reset(struct usbnet *dev)
 {
 	struct asix_data *data = (struct asix_data *)&dev->data;
+	int ret;
+
+	/* Rewrite MAC address */
+	ether_addr_copy(data->mac_addr, dev->net->dev_addr);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0,
+			     ETH_ALEN, data->mac_addr, 0);
+	if (ret < 0)
+		goto out;
+
+	/* Set RX_CTL to default values with 2k buffer, and enable cactus */
+	ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, 0);
+	if (ret < 0)
+		goto out;
+
+	asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT, 0);
+	if (ret < 0)
+		goto out;
+
+	return 0;
+
+out:
+	return ret;
+}
+
+static int ax88772_hw_reset(struct usbnet *dev, int in_pm)
+{
+	struct asix_data *data = (struct asix_data *)&dev->data;
 	int ret, embd_phy;
 	u16 rx_ctl;
 
-	ret = asix_write_gpio(dev,
-			AX_GPIO_RSE | AX_GPIO_GPO_2 | AX_GPIO_GPO2EN, 5);
+	ret = asix_write_gpio(dev, AX_GPIO_RSE | AX_GPIO_GPO_2 |
+			      AX_GPIO_GPO2EN, 5, in_pm);
 	if (ret < 0)
 		goto out;
 
-	embd_phy = ((asix_get_phy_addr(dev) & 0x1f) == 0x10 ? 1 : 0);
+	embd_phy = ((dev->mii.phy_id & 0x1f) == 0x10 ? 1 : 0);
 
-	ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, embd_phy, 0, 0, NULL);
+	ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, embd_phy,
+			     0, 0, NULL, in_pm);
 	if (ret < 0) {
 		netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret);
 		goto out;
 	}
 
-	ret = asix_sw_reset(dev, AX_SWRESET_IPPD | AX_SWRESET_PRL);
-	if (ret < 0)
-		goto out;
+	if (embd_phy) {
+		ret = asix_sw_reset(dev, AX_SWRESET_IPPD, in_pm);
+		if (ret < 0)
+			goto out;
 
-	msleep(150);
+		usleep_range(10000, 11000);
 
-	ret = asix_sw_reset(dev, AX_SWRESET_CLEAR);
-	if (ret < 0)
-		goto out;
+		ret = asix_sw_reset(dev, AX_SWRESET_CLEAR, in_pm);
+		if (ret < 0)
+			goto out;
 
-	msleep(150);
+		msleep(60);
 
-	if (embd_phy) {
-		ret = asix_sw_reset(dev, AX_SWRESET_IPRL);
+		ret = asix_sw_reset(dev, AX_SWRESET_IPRL | AX_SWRESET_PRL,
+				    in_pm);
 		if (ret < 0)
 			goto out;
 	} else {
-		ret = asix_sw_reset(dev, AX_SWRESET_PRTE);
+		ret = asix_sw_reset(dev, AX_SWRESET_IPPD | AX_SWRESET_PRL,
+				    in_pm);
 		if (ret < 0)
 			goto out;
 	}
 
 	msleep(150);
-	rx_ctl = asix_read_rx_ctl(dev);
-	netdev_dbg(dev->net, "RX_CTL is 0x%04x after software reset\n", rx_ctl);
-	ret = asix_write_rx_ctl(dev, 0x0000);
+
+	if (in_pm && (!asix_mdio_read_nopm(dev->net, dev->mii.phy_id,
+					   MII_PHYSID1))){
+		ret = -EIO;
+		goto out;
+	}
+
+	ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, in_pm);
+	if (ret < 0)
+		goto out;
+
+	ret = asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT, in_pm);
 	if (ret < 0)
 		goto out;
 
-	rx_ctl = asix_read_rx_ctl(dev);
-	netdev_dbg(dev->net, "RX_CTL is 0x%04x setting to 0x0000\n", rx_ctl);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0,
+			     AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT,
+			     AX88772_IPG2_DEFAULT, 0, NULL, in_pm);
+	if (ret < 0) {
+		netdev_dbg(dev->net, "Write IPG,IPG1,IPG2 failed: %d\n", ret);
+		goto out;
+	}
 
-	ret = asix_sw_reset(dev, AX_SWRESET_PRL);
+	/* Rewrite MAC address */
+	ether_addr_copy(data->mac_addr, dev->net->dev_addr);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0,
+			     ETH_ALEN, data->mac_addr, in_pm);
 	if (ret < 0)
 		goto out;
 
-	msleep(150);
+	/* Set RX_CTL to default values with 2k buffer, and enable cactus */
+	ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, in_pm);
+	if (ret < 0)
+		goto out;
+
+	rx_ctl = asix_read_rx_ctl(dev, in_pm);
+	netdev_dbg(dev->net, "RX_CTL is 0x%04x after all initializations\n",
+		   rx_ctl);
+
+	rx_ctl = asix_read_medium_status(dev, in_pm);
+	netdev_dbg(dev->net,
+		   "Medium Status is 0x%04x after all initializations\n",
+		   rx_ctl);
+
+	return 0;
+
+out:
+	return ret;
+}
+
+static int ax88772a_hw_reset(struct usbnet *dev, int in_pm)
+{
+	struct asix_data *data = (struct asix_data *)&dev->data;
+	int ret, embd_phy;
+	u16 rx_ctl;
+	u8 chipcode = 0;
 
-	ret = asix_sw_reset(dev, AX_SWRESET_IPRL | AX_SWRESET_PRL);
+	ret = asix_write_gpio(dev, AX_GPIO_RSE, 5, in_pm);
 	if (ret < 0)
 		goto out;
 
-	msleep(150);
+	embd_phy = ((dev->mii.phy_id & 0x1f) == 0x10 ? 1 : 0);
 
-	asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
-	asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
-			ADVERTISE_ALL | ADVERTISE_CSMA);
-	mii_nway_restart(&dev->mii);
+	ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, embd_phy |
+			     AX_PHYSEL_SSEN, 0, 0, NULL, in_pm);
+	if (ret < 0) {
+		netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret);
+		goto out;
+	}
+	usleep_range(10000, 11000);
 
-	ret = asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT);
+	ret = asix_sw_reset(dev, AX_SWRESET_IPPD | AX_SWRESET_IPRL, in_pm);
 	if (ret < 0)
 		goto out;
 
+	usleep_range(10000, 11000);
+
+	ret = asix_sw_reset(dev, AX_SWRESET_IPRL, in_pm);
+	if (ret < 0)
+		goto out;
+
+	msleep(160);
+
+	ret = asix_sw_reset(dev, AX_SWRESET_CLEAR, in_pm);
+	if (ret < 0)
+		goto out;
+
+	ret = asix_sw_reset(dev, AX_SWRESET_IPRL, in_pm);
+	if (ret < 0)
+		goto out;
+
+	msleep(200);
+
+	if (in_pm && (!asix_mdio_read_nopm(dev->net, dev->mii.phy_id,
+					   MII_PHYSID1))) {
+		ret = -1;
+		goto out;
+	}
+
+	ret = asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0,
+			    0, 1, &chipcode, in_pm);
+	if (ret < 0)
+		goto out;
+
+	if ((chipcode & AX_CHIPCODE_MASK) == AX_AX88772B_CHIPCODE) {
+		ret = asix_write_cmd(dev, AX_QCTCTRL, 0x8000, 0x8001,
+				     0, NULL, in_pm);
+		if (ret < 0) {
+			netdev_dbg(dev->net, "Write BQ setting failed: %d\n",
+				   ret);
+			goto out;
+		}
+	}
+
 	ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0,
 				AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT,
-				AX88772_IPG2_DEFAULT, 0, NULL);
+				AX88772_IPG2_DEFAULT, 0, NULL, in_pm);
 	if (ret < 0) {
 		netdev_dbg(dev->net, "Write IPG,IPG1,IPG2 failed: %d\n", ret);
 		goto out;
@@ -378,20 +493,29 @@ static int ax88772_reset(struct usbnet *dev)
 	/* Rewrite MAC address */
 	memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN);
 	ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
-							data->mac_addr);
+							data->mac_addr, in_pm);
+	if (ret < 0)
+		goto out;
+
+	/* Set RX_CTL to default values with 2k buffer, and enable cactus */
+	ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, in_pm);
 	if (ret < 0)
 		goto out;
 
+	ret = asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT, in_pm);
+	if (ret < 0)
+		return ret;
+
 	/* Set RX_CTL to default values with 2k buffer, and enable cactus */
-	ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL);
+	ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, in_pm);
 	if (ret < 0)
 		goto out;
 
-	rx_ctl = asix_read_rx_ctl(dev);
+	rx_ctl = asix_read_rx_ctl(dev, in_pm);
 	netdev_dbg(dev->net, "RX_CTL is 0x%04x after all initializations\n",
 		   rx_ctl);
 
-	rx_ctl = asix_read_medium_status(dev);
+	rx_ctl = asix_read_medium_status(dev, in_pm);
 	netdev_dbg(dev->net,
 		   "Medium Status is 0x%04x after all initializations\n",
 		   rx_ctl);
@@ -400,7 +524,6 @@ static int ax88772_reset(struct usbnet *dev)
 
 out:
 	return ret;
-
 }
 
 static const struct net_device_ops ax88772_netdev_ops = {
@@ -415,11 +538,87 @@ static const struct net_device_ops ax88772_netdev_ops = {
 	.ndo_set_rx_mode        = asix_set_multicast,
 };
 
+static void ax88772_suspend(struct usbnet *dev)
+{
+	struct asix_common_private *priv = dev->driver_priv;
+
+	/* Preserve BMCR for restoring */
+	priv->presvd_phy_bmcr =
+		asix_mdio_read_nopm(dev->net, dev->mii.phy_id, MII_BMCR);
+
+	/* Preserve ANAR for restoring */
+	priv->presvd_phy_advertise =
+		asix_mdio_read_nopm(dev->net, dev->mii.phy_id, MII_ADVERTISE);
+}
+
+static int asix_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	struct usbnet *dev = usb_get_intfdata(intf);
+	struct asix_common_private *priv = dev->driver_priv;
+
+	if (priv->suspend)
+		priv->suspend(dev);
+
+	return usbnet_suspend(intf, message);
+}
+
+static void ax88772_restore_phy(struct usbnet *dev)
+{
+	struct asix_common_private *priv = dev->driver_priv;
+
+	if (priv->presvd_phy_advertise) {
+		/* Restore Advertisement control reg */
+		asix_mdio_write_nopm(dev->net, dev->mii.phy_id, MII_ADVERTISE,
+				     priv->presvd_phy_advertise);
+
+		/* Restore BMCR */
+		asix_mdio_write_nopm(dev->net, dev->mii.phy_id, MII_BMCR,
+				     priv->presvd_phy_bmcr);
+
+		priv->presvd_phy_advertise = 0;
+		priv->presvd_phy_bmcr = 0;
+	}
+}
+
+static void ax88772_resume(struct usbnet *dev)
+{
+	int i;
+
+	for (i = 0; i < 3; i++)
+		if (!ax88772_hw_reset(dev, 1))
+			break;
+	ax88772_restore_phy(dev);
+}
+
+static void ax88772a_resume(struct usbnet *dev)
+{
+	int i;
+
+	for (i = 0; i < 3; i++) {
+		if (!ax88772a_hw_reset(dev, 1))
+			break;
+	}
+
+	ax88772_restore_phy(dev);
+}
+
+static int asix_resume(struct usb_interface *intf)
+{
+	struct usbnet *dev = usb_get_intfdata(intf);
+	struct asix_common_private *priv = dev->driver_priv;
+
+	if (priv->resume)
+		priv->resume(dev);
+
+	return usbnet_resume(intf);
+}
+
 static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
 {
-	int ret, embd_phy, i;
-	u8 buf[ETH_ALEN];
+	int ret, i;
+	u8 buf[ETH_ALEN], chipcode = 0;
 	u32 phyid;
+	struct asix_common_private *priv;
 
 	usbnet_get_endpoints(dev,intf);
 
@@ -427,13 +626,13 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
 	if (dev->driver_info->data & FLAG_EEPROM_MAC) {
 		for (i = 0; i < (ETH_ALEN >> 1); i++) {
 			ret = asix_read_cmd(dev, AX_CMD_READ_EEPROM, 0x04 + i,
-					0, 2, buf + i * 2);
+					    0, 2, buf + i * 2, 0);
 			if (ret < 0)
 				break;
 		}
 	} else {
 		ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID,
-				0, 0, ETH_ALEN, buf);
+				0, 0, ETH_ALEN, buf, 0);
 	}
 
 	if (ret < 0) {
@@ -456,16 +655,11 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
 	dev->net->needed_headroom = 4; /* cf asix_tx_fixup() */
 	dev->net->needed_tailroom = 4; /* cf asix_tx_fixup() */
 
-	embd_phy = ((dev->mii.phy_id & 0x1f) == 0x10 ? 1 : 0);
+	asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1, &chipcode, 0);
+	chipcode &= AX_CHIPCODE_MASK;
 
-	/* Reset the PHY to normal operation mode */
-	ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, embd_phy, 0, 0, NULL);
-	if (ret < 0) {
-		netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret);
-		return ret;
-	}
-
-	ax88772_reset(dev);
+	(chipcode == AX_AX88772_CHIPCODE) ? ax88772_hw_reset(dev, 0) :
+					    ax88772a_hw_reset(dev, 0);
 
 	/* Read PHYID register *AFTER* the PHY was reset properly */
 	phyid = asix_get_phyid(dev);
@@ -482,6 +676,18 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
 	if (!dev->driver_priv)
 		return -ENOMEM;
 
+	priv = dev->driver_priv;
+
+	priv->presvd_phy_bmcr = 0;
+	priv->presvd_phy_advertise = 0;
+	if (chipcode == AX_AX88772_CHIPCODE) {
+		priv->resume = ax88772_resume;
+		priv->suspend = ax88772_suspend;
+	} else {
+		priv->resume = ax88772a_resume;
+		priv->suspend = ax88772_suspend;
+	}
+
 	return 0;
 }
 
@@ -593,12 +799,12 @@ static int ax88178_reset(struct usbnet *dev)
 	int gpio0 = 0;
 	u32 phyid;
 
-	asix_read_cmd(dev, AX_CMD_READ_GPIOS, 0, 0, 1, &status);
+	asix_read_cmd(dev, AX_CMD_READ_GPIOS, 0, 0, 1, &status, 0);
 	netdev_dbg(dev->net, "GPIO Status: 0x%04x\n", status);
 
-	asix_write_cmd(dev, AX_CMD_WRITE_ENABLE, 0, 0, 0, NULL);
-	asix_read_cmd(dev, AX_CMD_READ_EEPROM, 0x0017, 0, 2, &eeprom);
-	asix_write_cmd(dev, AX_CMD_WRITE_DISABLE, 0, 0, 0, NULL);
+	asix_write_cmd(dev, AX_CMD_WRITE_ENABLE, 0, 0, 0, NULL, 0);
+	asix_read_cmd(dev, AX_CMD_READ_EEPROM, 0x0017, 0, 2, &eeprom, 0);
+	asix_write_cmd(dev, AX_CMD_WRITE_DISABLE, 0, 0, 0, NULL, 0);
 
 	netdev_dbg(dev->net, "EEPROM index 0x17 is 0x%04x\n", eeprom);
 
@@ -614,15 +820,16 @@ static int ax88178_reset(struct usbnet *dev)
 	netdev_dbg(dev->net, "GPIO0: %d, PhyMode: %d\n", gpio0, data->phymode);
 
 	/* Power up external GigaPHY through AX88178 GPIO pin */
-	asix_write_gpio(dev, AX_GPIO_RSE | AX_GPIO_GPO_1 | AX_GPIO_GPO1EN, 40);
+	asix_write_gpio(dev, AX_GPIO_RSE | AX_GPIO_GPO_1 |
+			AX_GPIO_GPO1EN, 40, 0);
 	if ((le16_to_cpu(eeprom) >> 8) != 1) {
-		asix_write_gpio(dev, 0x003c, 30);
-		asix_write_gpio(dev, 0x001c, 300);
-		asix_write_gpio(dev, 0x003c, 30);
+		asix_write_gpio(dev, 0x003c, 30, 0);
+		asix_write_gpio(dev, 0x001c, 300, 0);
+		asix_write_gpio(dev, 0x003c, 30, 0);
 	} else {
 		netdev_dbg(dev->net, "gpio phymode == 1 path\n");
-		asix_write_gpio(dev, AX_GPIO_GPO1EN, 30);
-		asix_write_gpio(dev, AX_GPIO_GPO1EN | AX_GPIO_GPO_1, 30);
+		asix_write_gpio(dev, AX_GPIO_GPO1EN, 30, 0);
+		asix_write_gpio(dev, AX_GPIO_GPO1EN | AX_GPIO_GPO_1, 30, 0);
 	}
 
 	/* Read PHYID register *AFTER* powering up PHY */
@@ -630,15 +837,15 @@ static int ax88178_reset(struct usbnet *dev)
 	netdev_dbg(dev->net, "PHYID=0x%08x\n", phyid);
 
 	/* Set AX88178 to enable MII/GMII/RGMII interface for external PHY */
-	asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, 0, 0, 0, NULL);
+	asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, 0, 0, 0, NULL, 0);
 
-	asix_sw_reset(dev, 0);
+	asix_sw_reset(dev, 0, 0);
 	msleep(150);
 
-	asix_sw_reset(dev, AX_SWRESET_PRL | AX_SWRESET_IPPD);
+	asix_sw_reset(dev, AX_SWRESET_PRL | AX_SWRESET_IPPD, 0);
 	msleep(150);
 
-	asix_write_rx_ctl(dev, 0);
+	asix_write_rx_ctl(dev, 0, 0);
 
 	if (data->phymode == PHY_MODE_MARVELL) {
 		marvell_phy_init(dev);
@@ -655,18 +862,18 @@ static int ax88178_reset(struct usbnet *dev)
 
 	mii_nway_restart(&dev->mii);
 
-	ret = asix_write_medium_mode(dev, AX88178_MEDIUM_DEFAULT);
+	ret = asix_write_medium_mode(dev, AX88178_MEDIUM_DEFAULT, 0);
 	if (ret < 0)
 		return ret;
 
 	/* Rewrite MAC address */
 	memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN);
 	ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
-							data->mac_addr);
+							data->mac_addr, 0);
 	if (ret < 0)
 		return ret;
 
-	ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL);
+	ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, 0);
 	if (ret < 0)
 		return ret;
 
@@ -704,7 +911,7 @@ static int ax88178_link_reset(struct usbnet *dev)
 	netdev_dbg(dev->net, "ax88178_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n",
 		   speed, ecmd.duplex, mode);
 
-	asix_write_medium_mode(dev, mode);
+	asix_write_medium_mode(dev, mode, 0);
 
 	if (data->phymode == PHY_MODE_MARVELL && data->ledmode)
 		marvell_led_status(dev, speed);
@@ -733,15 +940,15 @@ static void ax88178_set_mfb(struct usbnet *dev)
 		mfb = AX_RX_CTL_MFB_16384;
 	}
 
-	rxctl = asix_read_rx_ctl(dev);
-	asix_write_rx_ctl(dev, (rxctl & ~AX_RX_CTL_MFB_16384) | mfb);
+	rxctl = asix_read_rx_ctl(dev, 0);
+	asix_write_rx_ctl(dev, (rxctl & ~AX_RX_CTL_MFB_16384) | mfb, 0);
 
-	medium = asix_read_medium_status(dev);
+	medium = asix_read_medium_status(dev, 0);
 	if (dev->net->mtu > 1500)
 		medium |= AX_MEDIUM_JFE;
 	else
 		medium &= ~AX_MEDIUM_JFE;
-	asix_write_medium_mode(dev, medium);
+	asix_write_medium_mode(dev, medium, 0);
 
 	if (dev->rx_urb_size > old_rx_urb_size)
 		usbnet_unlink_rx_urbs(dev);
@@ -790,7 +997,7 @@ static int ax88178_bind(struct usbnet *dev, struct usb_interface *intf)
 	usbnet_get_endpoints(dev,intf);
 
 	/* Get the MAC address */
-	ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf);
+	ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf, 0);
 	if (ret < 0) {
 		netdev_dbg(dev->net, "Failed to read MAC address: %d\n", ret);
 		return ret;
@@ -811,10 +1018,10 @@ static int ax88178_bind(struct usbnet *dev, struct usb_interface *intf)
 	dev->net->ethtool_ops = &ax88178_ethtool_ops;
 
 	/* Blink LEDS so users know driver saw dongle */
-	asix_sw_reset(dev, 0);
+	asix_sw_reset(dev, 0, 0);
 	msleep(150);
 
-	asix_sw_reset(dev, AX_SWRESET_PRL | AX_SWRESET_IPPD);
+	asix_sw_reset(dev, AX_SWRESET_PRL | AX_SWRESET_IPPD, 0);
 	msleep(150);
 
 	/* Asix framing packs multiple eth frames into a 2K usb bulk transfer */
@@ -877,7 +1084,7 @@ static const struct driver_info ax88772_info = {
 	.unbind = ax88772_unbind,
 	.status = asix_status,
 	.link_reset = ax88772_link_reset,
-	.reset = ax88772_link_reset,
+	.reset = ax88772_reset,
 	.flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR | FLAG_MULTI_PACKET,
 	.rx_fixup = asix_rx_fixup_common,
 	.tx_fixup = asix_tx_fixup,
@@ -1005,7 +1212,7 @@ static const struct usb_device_id	products [] = {
 }, {
 	// Lenovo U2L100P 10/100
 	USB_DEVICE (0x17ef, 0x7203),
-	.driver_info = (unsigned long) &ax88772_info,
+	.driver_info = (unsigned long)&ax88772b_info,
 }, {
 	// ASIX AX88772B 10/100
 	USB_DEVICE (0x0b95, 0x772b),
@@ -1073,7 +1280,7 @@ static const struct usb_device_id	products [] = {
 }, {
 	// Asus USB Ethernet Adapter
 	USB_DEVICE (0x0b95, 0x7e2b),
-	.driver_info = (unsigned long) &ax88772_info,
+	.driver_info = (unsigned long)&ax88772b_info,
 }, {
 	/* ASIX 88172a demo board */
 	USB_DEVICE(0x0b95, 0x172a),
@@ -1095,8 +1302,8 @@ static struct usb_driver asix_driver = {
 	.name =		DRIVER_NAME,
 	.id_table =	products,
 	.probe =	usbnet_probe,
-	.suspend =	usbnet_suspend,
-	.resume =	usbnet_resume,
+	.suspend =	asix_suspend,
+	.resume =	asix_resume,
 	.disconnect =	usbnet_disconnect,
 	.supports_autosuspend = 1,
 	.disable_hub_initiated_lpm = 1,
diff --git a/drivers/net/usb/ax88172a.c b/drivers/net/usb/ax88172a.c
index 163a2c5..49a3bc1 100644
--- a/drivers/net/usb/ax88172a.c
+++ b/drivers/net/usb/ax88172a.c
@@ -81,7 +81,7 @@ static void ax88172a_adjust_link(struct net_device *netdev)
 	}
 
 	if (mode != priv->oldmode) {
-		asix_write_medium_mode(dev, mode);
+		asix_write_medium_mode(dev, mode, 0);
 		priv->oldmode = mode;
 		netdev_dbg(netdev, "speed %u duplex %d, setting mode to 0x%04x\n",
 			   phydev->speed, phydev->duplex, mode);
@@ -176,18 +176,19 @@ static int ax88172a_reset_phy(struct usbnet *dev, int embd_phy)
 {
 	int ret;
 
-	ret = asix_sw_reset(dev, AX_SWRESET_IPPD);
+	ret = asix_sw_reset(dev, AX_SWRESET_IPPD, 0);
 	if (ret < 0)
 		goto err;
 
 	msleep(150);
-	ret = asix_sw_reset(dev, AX_SWRESET_CLEAR);
+	ret = asix_sw_reset(dev, AX_SWRESET_CLEAR, 0);
 	if (ret < 0)
 		goto err;
 
 	msleep(150);
 
-	ret = asix_sw_reset(dev, embd_phy ? AX_SWRESET_IPRL : AX_SWRESET_IPPD);
+	ret = asix_sw_reset(dev, embd_phy ? AX_SWRESET_IPRL : AX_SWRESET_IPPD,
+			    0);
 	if (ret < 0)
 		goto err;
 
@@ -213,7 +214,7 @@ static int ax88172a_bind(struct usbnet *dev, struct usb_interface *intf)
 	dev->driver_priv = priv;
 
 	/* Get the MAC address */
-	ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf);
+	ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf, 0);
 	if (ret < 0) {
 		netdev_err(dev->net, "Failed to read MAC address: %d\n", ret);
 		goto free;
@@ -224,7 +225,7 @@ static int ax88172a_bind(struct usbnet *dev, struct usb_interface *intf)
 	dev->net->ethtool_ops = &ax88172a_ethtool_ops;
 
 	/* are we using the internal or the external phy? */
-	ret = asix_read_cmd(dev, AX_CMD_SW_PHY_STATUS, 0, 0, 1, buf);
+	ret = asix_read_cmd(dev, AX_CMD_SW_PHY_STATUS, 0, 0, 1, buf, 0);
 	if (ret < 0) {
 		netdev_err(dev->net, "Failed to read software interface selection register: %d\n",
 			   ret);
@@ -303,20 +304,20 @@ static int ax88172a_reset(struct usbnet *dev)
 	ax88172a_reset_phy(dev, priv->use_embdphy);
 
 	msleep(150);
-	rx_ctl = asix_read_rx_ctl(dev);
+	rx_ctl = asix_read_rx_ctl(dev, 0);
 	netdev_dbg(dev->net, "RX_CTL is 0x%04x after software reset\n", rx_ctl);
-	ret = asix_write_rx_ctl(dev, 0x0000);
+	ret = asix_write_rx_ctl(dev, 0x0000, 0);
 	if (ret < 0)
 		goto out;
 
-	rx_ctl = asix_read_rx_ctl(dev);
+	rx_ctl = asix_read_rx_ctl(dev, 0);
 	netdev_dbg(dev->net, "RX_CTL is 0x%04x setting to 0x0000\n", rx_ctl);
 
 	msleep(150);
 
 	ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0,
 			     AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT,
-			     AX88772_IPG2_DEFAULT, 0, NULL);
+			     AX88772_IPG2_DEFAULT, 0, NULL, 0);
 	if (ret < 0) {
 		netdev_err(dev->net, "Write IPG,IPG1,IPG2 failed: %d\n", ret);
 		goto out;
@@ -325,20 +326,20 @@ static int ax88172a_reset(struct usbnet *dev)
 	/* Rewrite MAC address */
 	memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN);
 	ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
-			     data->mac_addr);
+			     data->mac_addr, 0);
 	if (ret < 0)
 		goto out;
 
 	/* Set RX_CTL to default values with 2k buffer, and enable cactus */
-	ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL);
+	ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, 0);
 	if (ret < 0)
 		goto out;
 
-	rx_ctl = asix_read_rx_ctl(dev);
+	rx_ctl = asix_read_rx_ctl(dev, 0);
 	netdev_dbg(dev->net, "RX_CTL is 0x%04x after all initializations\n",
 		   rx_ctl);
 
-	rx_ctl = asix_read_medium_status(dev);
+	rx_ctl = asix_read_medium_status(dev, 0);
 	netdev_dbg(dev->net, "Medium Status is 0x%04x after all initializations\n",
 		   rx_ctl);
 
-- 
git-series 0.8.10

[PATCH v3 2/5] net: asix: Avoid looping when the device is disconnected

[robert.foss]

From: Robert Foss <robert.foss@collabora.com>

From: Vincent Palatin <vpalatin@chromium.org>

Check the answers from the USB stack and avoid re-sending multiple times
the request if the device has disappeared.

Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Signed-off-by: Robert Foss <robert.foss@collabora.com>
Tested-by: Robert Foss <robert.foss@collabora.com>
---
 drivers/net/usb/asix_common.c  | 56 +++++++++++++++++++++++++++--------
 drivers/net/usb/asix_devices.c |  2 +-
 2 files changed, 46 insertions(+), 12 deletions(-)

diff --git a/drivers/net/usb/asix_common.c b/drivers/net/usb/asix_common.c
index 25609ee..f79eb12 100644
--- a/drivers/net/usb/asix_common.c
+++ b/drivers/net/usb/asix_common.c
@@ -428,13 +428,21 @@ int asix_mdio_read(struct net_device *netdev, int phy_id, int loc)
 	__le16 res;
 	u8 smsr;
 	int i = 0;
+	int ret;
 
 	mutex_lock(&dev->phy_mutex);
 	do {
-		asix_set_sw_mii(dev, 0);
+		ret = asix_set_sw_mii(dev, 0);
+		if (ret == -ENODEV)
+			break;
 		usleep_range(1000, 1100);
-		asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1, &smsr, 0);
-	} while (!(smsr & AX_HOST_EN) && (i++ < 30));
+		ret = asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG,
+				    0, 0, 1, &smsr, 0);
+	} while (!(smsr & AX_HOST_EN) && (i++ < 30) && (ret != -ENODEV));
+	if (ret == -ENODEV) {
+		mutex_unlock(&dev->phy_mutex);
+		return ret;
+	}
 
 	asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id,
 				(__u16)loc, 2, &res, 0);
@@ -453,16 +461,24 @@ void asix_mdio_write(struct net_device *netdev, int phy_id, int loc, int val)
 	__le16 res = cpu_to_le16(val);
 	u8 smsr;
 	int i = 0;
+	int ret;
 
 	netdev_dbg(dev->net, "asix_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n",
 			phy_id, loc, val);
 
 	mutex_lock(&dev->phy_mutex);
 	do {
-		asix_set_sw_mii(dev, 0);
+		ret = asix_set_sw_mii(dev, 0);
+		if (ret == -ENODEV)
+			break;
 		usleep_range(1000, 1100);
-		asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1, &smsr, 0);
-	} while (!(smsr & AX_HOST_EN) && (i++ < 30));
+		ret = asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG,
+				    0, 0, 1, &smsr, 0);
+	} while (!(smsr & AX_HOST_EN) && (i++ < 30) && (ret != -ENODEV));
+	if (ret == -ENODEV) {
+		mutex_unlock(&dev->phy_mutex);
+		return;
+	}
 
 	asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id,
 		       (__u16)loc, 2, &res, 0);
@@ -476,13 +492,21 @@ int asix_mdio_read_nopm(struct net_device *netdev, int phy_id, int loc)
 	__le16 res;
 	u8 smsr;
 	int i = 0;
+	int ret;
 
 	mutex_lock(&dev->phy_mutex);
 	do {
-		asix_set_sw_mii(dev, 1);
+		ret = asix_set_sw_mii(dev, 1);
+		if (ret == -ENODEV)
+			break;
 		usleep_range(1000, 1100);
-		asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1, &smsr, 1);
-	} while (!(smsr & AX_HOST_EN) && (i++ < 30));
+		ret = asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG,
+				    0, 0, 1, &smsr, 1);
+	} while (!(smsr & AX_HOST_EN) && (i++ < 30) && (ret != -ENODEV));
+	if (ret == -ENODEV) {
+		mutex_unlock(&dev->phy_mutex);
+		return ret;
+	}
 
 	asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id,
 		      (__u16)loc, 2, &res, 1);
@@ -502,16 +526,24 @@ asix_mdio_write_nopm(struct net_device *netdev, int phy_id, int loc, int val)
 	__le16 res = cpu_to_le16(val);
 	u8 smsr;
 	int i = 0;
+	int ret;
 
 	netdev_dbg(dev->net, "asix_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n",
 			phy_id, loc, val);
 
 	mutex_lock(&dev->phy_mutex);
 	do {
-		asix_set_sw_mii(dev, 1);
+		ret = asix_set_sw_mii(dev, 1);
+		if (ret == -ENODEV)
+			break;
 		usleep_range(1000, 1100);
-		asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1, &smsr, 1);
-	} while (!(smsr & AX_HOST_EN) && (i++ < 30));
+		ret = asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG,
+				    0, 0, 1, &smsr, 1);
+	} while (!(smsr & AX_HOST_EN) && (i++ < 30) && (ret != -ENODEV));
+	if (ret == -ENODEV) {
+		mutex_unlock(&dev->phy_mutex);
+		return;
+	}
 
 	asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id,
 		       (__u16)loc, 2, &res, 1);
diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
index aaa4290..ebeb730 100644
--- a/drivers/net/usb/asix_devices.c
+++ b/drivers/net/usb/asix_devices.c
@@ -79,6 +79,8 @@ static u32 asix_get_phyid(struct usbnet *dev)
 	/* Poll for the rare case the FW or phy isn't ready yet.  */
 	for (i = 0; i < 100; i++) {
 		phy_reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID1);
+		if (phy_reg < 0)
+			return 0;
 		if (phy_reg != 0 && phy_reg != 0xFFFF)
 			break;
 		mdelay(1);
-- 
git-series 0.8.10

[PATCH v3 3/5] net: asix: Fix AX88772x resume failures

[robert.foss]

From: Robert Foss <robert.foss@collabora.com>

From: Allan Chou <allan@asix.com.tw>

The change fixes AX88772x resume failure by
- Restore incorrect AX88772A PHY registers when resetting
- Need to stop MAC operation when suspending
- Need to restart MII when restoring PHY

Signed-off-by: Allan Chou <allan@asix.com.tw>
Signed-off-by: Robert Foss <robert.foss@collabora.com>
Tested-by: Robert Foss <robert.foss@collabora.com>
---
 drivers/net/usb/asix_devices.c | 47 ++++++++++++++++++++++++++++++++++-
 1 file changed, 46 insertions(+), 1 deletion(-)

diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
index ebeb730..083dc2e 100644
--- a/drivers/net/usb/asix_devices.c
+++ b/drivers/net/usb/asix_devices.c
@@ -35,6 +35,15 @@
 
 #define	PHY_MODE_RTL8211CL	0x000C
 
+#define AX88772A_PHY14H		0x14
+#define AX88772A_PHY14H_DEFAULT 0x442C
+
+#define AX88772A_PHY15H		0x15
+#define AX88772A_PHY15H_DEFAULT 0x03C8
+
+#define AX88772A_PHY16H		0x16
+#define AX88772A_PHY16H_DEFAULT 0x4044
+
 struct ax88172_int_data {
 	__le16 res1;
 	u8 link;
@@ -424,7 +433,7 @@ static int ax88772a_hw_reset(struct usbnet *dev, int in_pm)
 {
 	struct asix_data *data = (struct asix_data *)&dev->data;
 	int ret, embd_phy;
-	u16 rx_ctl;
+	u16 rx_ctl, phy14h, phy15h, phy16h;
 	u8 chipcode = 0;
 
 	ret = asix_write_gpio(dev, AX_GPIO_RSE, 5, in_pm);
@@ -482,6 +491,32 @@ static int ax88772a_hw_reset(struct usbnet *dev, int in_pm)
 				   ret);
 			goto out;
 		}
+	} else if ((chipcode & AX_CHIPCODE_MASK) == AX_AX88772A_CHIPCODE) {
+		/* Check if the PHY registers have default settings */
+		phy14h = asix_mdio_read_nopm(dev->net, dev->mii.phy_id,
+					     AX88772A_PHY14H);
+		phy15h = asix_mdio_read_nopm(dev->net, dev->mii.phy_id,
+					     AX88772A_PHY15H);
+		phy16h = asix_mdio_read_nopm(dev->net, dev->mii.phy_id,
+					     AX88772A_PHY16H);
+
+		netdev_dbg(dev->net,
+			   "772a_hw_reset: MR20=0x%x MR21=0x%x MR22=0x%x\n",
+			   phy14h, phy15h, phy16h);
+
+		/* Restore PHY registers default setting if not */
+		if (phy14h != AX88772A_PHY14H_DEFAULT)
+			asix_mdio_write_nopm(dev->net, dev->mii.phy_id,
+					     AX88772A_PHY14H,
+					     AX88772A_PHY14H_DEFAULT);
+		if (phy15h != AX88772A_PHY15H_DEFAULT)
+			asix_mdio_write_nopm(dev->net, dev->mii.phy_id,
+					     AX88772A_PHY15H,
+					     AX88772A_PHY15H_DEFAULT);
+		if (phy16h != AX88772A_PHY16H_DEFAULT)
+			asix_mdio_write_nopm(dev->net, dev->mii.phy_id,
+					     AX88772A_PHY16H,
+					     AX88772A_PHY16H_DEFAULT);
 	}
 
 	ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0,
@@ -543,6 +578,15 @@ static const struct net_device_ops ax88772_netdev_ops = {
 static void ax88772_suspend(struct usbnet *dev)
 {
 	struct asix_common_private *priv = dev->driver_priv;
+	u16 medium;
+
+	/* Stop MAC operation */
+	medium = asix_read_medium_status(dev, 0);
+	medium &= ~AX_MEDIUM_RE;
+	asix_write_medium_mode(dev, medium, 0);
+
+	netdev_dbg(dev->net, "ax88772_suspend: medium=0x%04x\n",
+		   asix_read_medium_status(dev, 0));
 
 	/* Preserve BMCR for restoring */
 	priv->presvd_phy_bmcr =
@@ -577,6 +621,7 @@ static void ax88772_restore_phy(struct usbnet *dev)
 		asix_mdio_write_nopm(dev->net, dev->mii.phy_id, MII_BMCR,
 				     priv->presvd_phy_bmcr);
 
+		mii_nway_restart(&dev->mii);
 		priv->presvd_phy_advertise = 0;
 		priv->presvd_phy_bmcr = 0;
 	}
-- 
git-series 0.8.10

[PATCH v3 1/5] net: asix: Add in_pm parameter

[robert.foss-ZGY8ohtN/8qB+jHODAdFcQ]

From: Robert Foss <robert.foss-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>

From: Freddy Xin <freddy-knRN6Y/kmf1NUHwG+Fw1Kw@public.gmane.org>

In order to R/W registers in suspend/resume functions, in_pm flags are
added to some functions to determine whether the nopm version of usb
functions is called.

Save BMCR and ANAR PHY registers in suspend function and restore them
in resume function.

Reset HW in resume function to ensure the PHY works correctly.

Signed-off-by: Freddy Xin <freddy-knRN6Y/kmf1NUHwG+Fw1Kw@public.gmane.org>
Signed-off-by: Robert Foss <robert.foss-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>
Tested-by: Robert Foss <robert.foss-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>
---
 drivers/net/usb/asix.h         |  40 +++-
 drivers/net/usb/asix_common.c  | 180 ++++++++++++----
 drivers/net/usb/asix_devices.c | 373 ++++++++++++++++++++++++++--------
 drivers/net/usb/ax88172a.c     |  29 +--
 4 files changed, 472 insertions(+), 150 deletions(-)

diff --git a/drivers/net/usb/asix.h b/drivers/net/usb/asix.h
index a2d3ea6..d109242 100644
--- a/drivers/net/usb/asix.h
+++ b/drivers/net/usb/asix.h
@@ -46,6 +46,7 @@
 #define AX_CMD_SET_SW_MII		0x06
 #define AX_CMD_READ_MII_REG		0x07
 #define AX_CMD_WRITE_MII_REG		0x08
+#define AX_CMD_STATMNGSTS_REG		0x09
 #define AX_CMD_SET_HW_MII		0x0a
 #define AX_CMD_READ_EEPROM		0x0b
 #define AX_CMD_WRITE_EEPROM		0x0c
@@ -71,6 +72,17 @@
 #define AX_CMD_SW_RESET			0x20
 #define AX_CMD_SW_PHY_STATUS		0x21
 #define AX_CMD_SW_PHY_SELECT		0x22
+#define AX_QCTCTRL			0x2A
+
+#define AX_CHIPCODE_MASK		0x70
+#define AX_AX88772_CHIPCODE		0x00
+#define AX_AX88772A_CHIPCODE		0x10
+#define AX_AX88772B_CHIPCODE		0x20
+#define AX_HOST_EN			0x01
+
+#define AX_PHYSEL_PSEL			0x01
+#define AX_PHYSEL_SSMII			0
+#define AX_PHYSEL_SSEN			0x10
 
 #define AX_PHY_SELECT_MASK		(BIT(3) | BIT(2))
 #define AX_PHY_SELECT_INTERNAL		0
@@ -173,6 +185,10 @@ struct asix_rx_fixup_info {
 };
 
 struct asix_common_private {
+	void (*resume)(struct usbnet *dev);
+	void (*suspend)(struct usbnet *dev);
+	u16 presvd_phy_advertise;
+	u16 presvd_phy_bmcr;
 	struct asix_rx_fixup_info rx_fixup_info;
 };
 
@@ -182,10 +198,10 @@ extern const struct driver_info ax88172a_info;
 #define FLAG_EEPROM_MAC		(1UL << 0)  /* init device MAC from eeprom */
 
 int asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
-		  u16 size, void *data);
+		  u16 size, void *data, int in_pm);
 
 int asix_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
-		   u16 size, void *data);
+		   u16 size, void *data, int in_pm);
 
 void asix_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value,
 			  u16 index, u16 size, void *data);
@@ -197,27 +213,31 @@ int asix_rx_fixup_common(struct usbnet *dev, struct sk_buff *skb);
 struct sk_buff *asix_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
 			      gfp_t flags);
 
-int asix_set_sw_mii(struct usbnet *dev);
-int asix_set_hw_mii(struct usbnet *dev);
+int asix_set_sw_mii(struct usbnet *dev, int in_pm);
+int asix_set_hw_mii(struct usbnet *dev, int in_pm);
 
 int asix_read_phy_addr(struct usbnet *dev, int internal);
 int asix_get_phy_addr(struct usbnet *dev);
 
-int asix_sw_reset(struct usbnet *dev, u8 flags);
+int asix_sw_reset(struct usbnet *dev, u8 flags, int in_pm);
 
-u16 asix_read_rx_ctl(struct usbnet *dev);
-int asix_write_rx_ctl(struct usbnet *dev, u16 mode);
+u16 asix_read_rx_ctl(struct usbnet *dev, int in_pm);
+int asix_write_rx_ctl(struct usbnet *dev, u16 mode, int in_pm);
 
-u16 asix_read_medium_status(struct usbnet *dev);
-int asix_write_medium_mode(struct usbnet *dev, u16 mode);
+u16 asix_read_medium_status(struct usbnet *dev, int in_pm);
+int asix_write_medium_mode(struct usbnet *dev, u16 mode, int in_pm);
 
-int asix_write_gpio(struct usbnet *dev, u16 value, int sleep);
+int asix_write_gpio(struct usbnet *dev, u16 value, int sleep, int in_pm);
 
 void asix_set_multicast(struct net_device *net);
 
 int asix_mdio_read(struct net_device *netdev, int phy_id, int loc);
 void asix_mdio_write(struct net_device *netdev, int phy_id, int loc, int val);
 
+int asix_mdio_read_nopm(struct net_device *netdev, int phy_id, int loc);
+void asix_mdio_write_nopm(struct net_device *netdev, int phy_id, int loc,
+			  int val);
+
 void asix_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo);
 int asix_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo);
 
diff --git a/drivers/net/usb/asix_common.c b/drivers/net/usb/asix_common.c
index 7de5ab5..25609ee 100644
--- a/drivers/net/usb/asix_common.c
+++ b/drivers/net/usb/asix_common.c
@@ -22,24 +22,49 @@
 #include "asix.h"
 
 int asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
-		  u16 size, void *data)
+		  u16 size, void *data, int in_pm)
 {
 	int ret;
-	ret = usbnet_read_cmd(dev, cmd,
-			       USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-			       value, index, data, size);
+	int (*fn)(struct usbnet *, u8, u8, u16, u16, void *, u16);
+
+	BUG_ON(!dev);
+
+	if (!in_pm)
+		fn = usbnet_read_cmd;
+	else
+		fn = usbnet_read_cmd_nopm;
+
+	ret = fn(dev, cmd, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+		 value, index, data, size);
+
+	if (unlikely(ret < 0))
+		netdev_warn(dev->net, "Failed to read reg index 0x%04x: %d\n",
+			    index, ret);
 
-	if (ret != size && ret >= 0)
-		return -EINVAL;
 	return ret;
 }
 
 int asix_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
-		   u16 size, void *data)
+		   u16 size, void *data, int in_pm)
 {
-	return usbnet_write_cmd(dev, cmd,
-				USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-				value, index, data, size);
+	int ret;
+	int (*fn)(struct usbnet *, u8, u8, u16, u16, const void *, u16);
+
+	BUG_ON(!dev);
+
+	if (!in_pm)
+		fn = usbnet_write_cmd;
+	else
+		fn = usbnet_write_cmd_nopm;
+
+	ret = fn(dev, cmd, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+		 value, index, data, size);
+
+	if (unlikely(ret < 0))
+		netdev_warn(dev->net, "Failed to write reg index 0x%04x: %d\n",
+			    index, ret);
+
+	return ret;
 }
 
 void asix_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index,
@@ -225,19 +250,20 @@ struct sk_buff *asix_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
 	return skb;
 }
 
-int asix_set_sw_mii(struct usbnet *dev)
+int asix_set_sw_mii(struct usbnet *dev, int in_pm)
 {
 	int ret;
-	ret = asix_write_cmd(dev, AX_CMD_SET_SW_MII, 0x0000, 0, 0, NULL);
+	ret = asix_write_cmd(dev, AX_CMD_SET_SW_MII, 0x0000, 0, 0, NULL, in_pm);
+
 	if (ret < 0)
 		netdev_err(dev->net, "Failed to enable software MII access\n");
 	return ret;
 }
 
-int asix_set_hw_mii(struct usbnet *dev)
+int asix_set_hw_mii(struct usbnet *dev, int in_pm)
 {
 	int ret;
-	ret = asix_write_cmd(dev, AX_CMD_SET_HW_MII, 0x0000, 0, 0, NULL);
+	ret = asix_write_cmd(dev, AX_CMD_SET_HW_MII, 0x0000, 0, 0, NULL, in_pm);
 	if (ret < 0)
 		netdev_err(dev->net, "Failed to enable hardware MII access\n");
 	return ret;
@@ -247,7 +273,7 @@ int asix_read_phy_addr(struct usbnet *dev, int internal)
 {
 	int offset = (internal ? 1 : 0);
 	u8 buf[2];
-	int ret = asix_read_cmd(dev, AX_CMD_READ_PHY_ID, 0, 0, 2, buf);
+	int ret = asix_read_cmd(dev, AX_CMD_READ_PHY_ID, 0, 0, 2, buf, 0);
 
 	netdev_dbg(dev->net, "asix_get_phy_addr()\n");
 
@@ -270,21 +296,21 @@ int asix_get_phy_addr(struct usbnet *dev)
 }
 
 
-int asix_sw_reset(struct usbnet *dev, u8 flags)
+int asix_sw_reset(struct usbnet *dev, u8 flags, int in_pm)
 {
 	int ret;
 
-        ret = asix_write_cmd(dev, AX_CMD_SW_RESET, flags, 0, 0, NULL);
+	ret = asix_write_cmd(dev, AX_CMD_SW_RESET, flags, 0, 0, NULL, in_pm);
 	if (ret < 0)
 		netdev_err(dev->net, "Failed to send software reset: %02x\n", ret);
 
 	return ret;
 }
 
-u16 asix_read_rx_ctl(struct usbnet *dev)
+u16 asix_read_rx_ctl(struct usbnet *dev, int in_pm)
 {
 	__le16 v;
-	int ret = asix_read_cmd(dev, AX_CMD_READ_RX_CTL, 0, 0, 2, &v);
+	int ret = asix_read_cmd(dev, AX_CMD_READ_RX_CTL, 0, 0, 2, &v, in_pm);
 
 	if (ret < 0) {
 		netdev_err(dev->net, "Error reading RX_CTL register: %02x\n", ret);
@@ -295,12 +321,12 @@ out:
 	return ret;
 }
 
-int asix_write_rx_ctl(struct usbnet *dev, u16 mode)
+int asix_write_rx_ctl(struct usbnet *dev, u16 mode, int in_pm)
 {
 	int ret;
 
 	netdev_dbg(dev->net, "asix_write_rx_ctl() - mode = 0x%04x\n", mode);
-	ret = asix_write_cmd(dev, AX_CMD_WRITE_RX_CTL, mode, 0, 0, NULL);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_RX_CTL, mode, 0, 0, NULL, in_pm);
 	if (ret < 0)
 		netdev_err(dev->net, "Failed to write RX_CTL mode to 0x%04x: %02x\n",
 			   mode, ret);
@@ -308,10 +334,11 @@ int asix_write_rx_ctl(struct usbnet *dev, u16 mode)
 	return ret;
 }
 
-u16 asix_read_medium_status(struct usbnet *dev)
+u16 asix_read_medium_status(struct usbnet *dev, int in_pm)
 {
 	__le16 v;
-	int ret = asix_read_cmd(dev, AX_CMD_READ_MEDIUM_STATUS, 0, 0, 2, &v);
+	int ret = asix_read_cmd(dev, AX_CMD_READ_MEDIUM_STATUS,
+				0, 0, 2, &v, in_pm);
 
 	if (ret < 0) {
 		netdev_err(dev->net, "Error reading Medium Status register: %02x\n",
@@ -323,12 +350,13 @@ u16 asix_read_medium_status(struct usbnet *dev)
 
 }
 
-int asix_write_medium_mode(struct usbnet *dev, u16 mode)
+int asix_write_medium_mode(struct usbnet *dev, u16 mode, int in_pm)
 {
 	int ret;
 
 	netdev_dbg(dev->net, "asix_write_medium_mode() - mode = 0x%04x\n", mode);
-	ret = asix_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE,
+			     mode, 0, 0, NULL, in_pm);
 	if (ret < 0)
 		netdev_err(dev->net, "Failed to write Medium Mode mode to 0x%04x: %02x\n",
 			   mode, ret);
@@ -336,12 +364,12 @@ int asix_write_medium_mode(struct usbnet *dev, u16 mode)
 	return ret;
 }
 
-int asix_write_gpio(struct usbnet *dev, u16 value, int sleep)
+int asix_write_gpio(struct usbnet *dev, u16 value, int sleep, int in_pm)
 {
 	int ret;
 
 	netdev_dbg(dev->net, "asix_write_gpio() - value = 0x%04x\n", value);
-	ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS, value, 0, 0, NULL);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS, value, 0, 0, NULL, in_pm);
 	if (ret < 0)
 		netdev_err(dev->net, "Failed to write GPIO value 0x%04x: %02x\n",
 			   value, ret);
@@ -398,16 +426,23 @@ int asix_mdio_read(struct net_device *netdev, int phy_id, int loc)
 {
 	struct usbnet *dev = netdev_priv(netdev);
 	__le16 res;
+	u8 smsr;
+	int i = 0;
 
 	mutex_lock(&dev->phy_mutex);
-	asix_set_sw_mii(dev);
+	do {
+		asix_set_sw_mii(dev, 0);
+		usleep_range(1000, 1100);
+		asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1, &smsr, 0);
+	} while (!(smsr & AX_HOST_EN) && (i++ < 30));
+
 	asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id,
-				(__u16)loc, 2, &res);
-	asix_set_hw_mii(dev);
+				(__u16)loc, 2, &res, 0);
+	asix_set_hw_mii(dev, 0);
 	mutex_unlock(&dev->phy_mutex);
 
 	netdev_dbg(dev->net, "asix_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n",
-		   phy_id, loc, le16_to_cpu(res));
+			phy_id, loc, le16_to_cpu(res));
 
 	return le16_to_cpu(res);
 }
@@ -416,13 +451,71 @@ void asix_mdio_write(struct net_device *netdev, int phy_id, int loc, int val)
 {
 	struct usbnet *dev = netdev_priv(netdev);
 	__le16 res = cpu_to_le16(val);
+	u8 smsr;
+	int i = 0;
 
 	netdev_dbg(dev->net, "asix_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n",
-		   phy_id, loc, val);
+			phy_id, loc, val);
+
+	mutex_lock(&dev->phy_mutex);
+	do {
+		asix_set_sw_mii(dev, 0);
+		usleep_range(1000, 1100);
+		asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1, &smsr, 0);
+	} while (!(smsr & AX_HOST_EN) && (i++ < 30));
+
+	asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id,
+		       (__u16)loc, 2, &res, 0);
+	asix_set_hw_mii(dev, 0);
+	mutex_unlock(&dev->phy_mutex);
+}
+
+int asix_mdio_read_nopm(struct net_device *netdev, int phy_id, int loc)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	__le16 res;
+	u8 smsr;
+	int i = 0;
+
+	mutex_lock(&dev->phy_mutex);
+	do {
+		asix_set_sw_mii(dev, 1);
+		usleep_range(1000, 1100);
+		asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1, &smsr, 1);
+	} while (!(smsr & AX_HOST_EN) && (i++ < 30));
+
+	asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id,
+		      (__u16)loc, 2, &res, 1);
+	asix_set_hw_mii(dev, 1);
+	mutex_unlock(&dev->phy_mutex);
+
+	netdev_dbg(dev->net, "asix_mdio_read_nopm() phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n",
+			phy_id, loc, le16_to_cpu(res));
+
+	return le16_to_cpu(res);
+}
+
+void
+asix_mdio_write_nopm(struct net_device *netdev, int phy_id, int loc, int val)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	__le16 res = cpu_to_le16(val);
+	u8 smsr;
+	int i = 0;
+
+	netdev_dbg(dev->net, "asix_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n",
+			phy_id, loc, val);
+
 	mutex_lock(&dev->phy_mutex);
-	asix_set_sw_mii(dev);
-	asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id, (__u16)loc, 2, &res);
-	asix_set_hw_mii(dev);
+	do {
+		asix_set_sw_mii(dev, 1);
+		usleep_range(1000, 1100);
+		asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1, &smsr, 1);
+	} while (!(smsr & AX_HOST_EN) && (i++ < 30));
+
+	asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id,
+		       (__u16)loc, 2, &res, 1);
+	asix_set_hw_mii(dev, 1);
 	mutex_unlock(&dev->phy_mutex);
 }
 
@@ -431,7 +524,8 @@ void asix_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
 	struct usbnet *dev = netdev_priv(net);
 	u8 opt;
 
-	if (asix_read_cmd(dev, AX_CMD_READ_MONITOR_MODE, 0, 0, 1, &opt) < 0) {
+	if (asix_read_cmd(dev, AX_CMD_READ_MONITOR_MODE,
+			  0, 0, 1, &opt, 0) < 0) {
 		wolinfo->supported = 0;
 		wolinfo->wolopts = 0;
 		return;
@@ -455,7 +549,7 @@ int asix_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
 		opt |= AX_MONITOR_MAGIC;
 
 	if (asix_write_cmd(dev, AX_CMD_WRITE_MONITOR_MODE,
-			      opt, 0, 0, NULL) < 0)
+			      opt, 0, 0, NULL, 0) < 0)
 		return -EINVAL;
 
 	return 0;
@@ -490,7 +584,7 @@ int asix_get_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
 	/* ax8817x returns 2 bytes from eeprom on read */
 	for (i = first_word; i <= last_word; i++) {
 		if (asix_read_cmd(dev, AX_CMD_READ_EEPROM, i, 0, 2,
-				  &(eeprom_buff[i - first_word])) < 0) {
+				  &eeprom_buff[i - first_word], 0) < 0) {
 			kfree(eeprom_buff);
 			return -EIO;
 		}
@@ -531,7 +625,7 @@ int asix_set_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
 	   the EEPROM */
 	if (eeprom->offset & 1) {
 		ret = asix_read_cmd(dev, AX_CMD_READ_EEPROM, first_word, 0, 2,
-				    &(eeprom_buff[0]));
+				    &eeprom_buff[0], 0);
 		if (ret < 0) {
 			netdev_err(net, "Failed to read EEPROM at offset 0x%02x.\n", first_word);
 			goto free;
@@ -540,7 +634,7 @@ int asix_set_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
 
 	if ((eeprom->offset + eeprom->len) & 1) {
 		ret = asix_read_cmd(dev, AX_CMD_READ_EEPROM, last_word, 0, 2,
-				    &(eeprom_buff[last_word - first_word]));
+				    &eeprom_buff[last_word - first_word], 0);
 		if (ret < 0) {
 			netdev_err(net, "Failed to read EEPROM at offset 0x%02x.\n", last_word);
 			goto free;
@@ -550,7 +644,7 @@ int asix_set_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
 	memcpy((u8 *)eeprom_buff + (eeprom->offset & 1), data, eeprom->len);
 
 	/* write data to EEPROM */
-	ret = asix_write_cmd(dev, AX_CMD_WRITE_ENABLE, 0x0000, 0, 0, NULL);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_ENABLE, 0x0000, 0, 0, NULL, 0);
 	if (ret < 0) {
 		netdev_err(net, "Failed to enable EEPROM write\n");
 		goto free;
@@ -561,7 +655,7 @@ int asix_set_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
 		netdev_dbg(net, "write to EEPROM at offset 0x%02x, data 0x%04x\n",
 			   i, eeprom_buff[i - first_word]);
 		ret = asix_write_cmd(dev, AX_CMD_WRITE_EEPROM, i,
-				     eeprom_buff[i - first_word], 0, NULL);
+				     eeprom_buff[i - first_word], 0, NULL, 0);
 		if (ret < 0) {
 			netdev_err(net, "Failed to write EEPROM at offset 0x%02x.\n",
 				   i);
@@ -570,7 +664,7 @@ int asix_set_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
 		msleep(20);
 	}
 
-	ret = asix_write_cmd(dev, AX_CMD_WRITE_DISABLE, 0x0000, 0, 0, NULL);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_DISABLE, 0x0000, 0, 0, NULL, 0);
 	if (ret < 0) {
 		netdev_err(net, "Failed to disable EEPROM write\n");
 		goto free;
diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
index 5cabefc..aaa4290 100644
--- a/drivers/net/usb/asix_devices.c
+++ b/drivers/net/usb/asix_devices.c
@@ -184,7 +184,7 @@ static int ax88172_link_reset(struct usbnet *dev)
 	netdev_dbg(dev->net, "ax88172_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n",
 		   ethtool_cmd_speed(&ecmd), ecmd.duplex, mode);
 
-	asix_write_medium_mode(dev, mode);
+	asix_write_medium_mode(dev, mode, 0);
 
 	return 0;
 }
@@ -213,18 +213,19 @@ static int ax88172_bind(struct usbnet *dev, struct usb_interface *intf)
 	/* Toggle the GPIOs in a manufacturer/model specific way */
 	for (i = 2; i >= 0; i--) {
 		ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS,
-				(gpio_bits >> (i * 8)) & 0xff, 0, 0, NULL);
+				(gpio_bits >> (i * 8)) & 0xff, 0, 0, NULL, 0);
 		if (ret < 0)
 			goto out;
 		msleep(5);
 	}
 
-	ret = asix_write_rx_ctl(dev, 0x80);
+	ret = asix_write_rx_ctl(dev, 0x80, 0);
 	if (ret < 0)
 		goto out;
 
 	/* Get the MAC address */
-	ret = asix_read_cmd(dev, AX88172_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf);
+	ret = asix_read_cmd(dev, AX88172_CMD_READ_NODE_ID,
+			    0, 0, ETH_ALEN, buf, 0);
 	if (ret < 0) {
 		netdev_dbg(dev->net, "read AX_CMD_READ_NODE_ID failed: %d\n",
 			   ret);
@@ -290,7 +291,7 @@ static int ax88772_link_reset(struct usbnet *dev)
 	netdev_dbg(dev->net, "ax88772_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n",
 		   ethtool_cmd_speed(&ecmd), ecmd.duplex, mode);
 
-	asix_write_medium_mode(dev, mode);
+	asix_write_medium_mode(dev, mode, 0);
 
 	return 0;
 }
@@ -298,78 +299,192 @@ static int ax88772_link_reset(struct usbnet *dev)
 static int ax88772_reset(struct usbnet *dev)
 {
 	struct asix_data *data = (struct asix_data *)&dev->data;
+	int ret;
+
+	/* Rewrite MAC address */
+	ether_addr_copy(data->mac_addr, dev->net->dev_addr);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0,
+			     ETH_ALEN, data->mac_addr, 0);
+	if (ret < 0)
+		goto out;
+
+	/* Set RX_CTL to default values with 2k buffer, and enable cactus */
+	ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, 0);
+	if (ret < 0)
+		goto out;
+
+	asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT, 0);
+	if (ret < 0)
+		goto out;
+
+	return 0;
+
+out:
+	return ret;
+}
+
+static int ax88772_hw_reset(struct usbnet *dev, int in_pm)
+{
+	struct asix_data *data = (struct asix_data *)&dev->data;
 	int ret, embd_phy;
 	u16 rx_ctl;
 
-	ret = asix_write_gpio(dev,
-			AX_GPIO_RSE | AX_GPIO_GPO_2 | AX_GPIO_GPO2EN, 5);
+	ret = asix_write_gpio(dev, AX_GPIO_RSE | AX_GPIO_GPO_2 |
+			      AX_GPIO_GPO2EN, 5, in_pm);
 	if (ret < 0)
 		goto out;
 
-	embd_phy = ((asix_get_phy_addr(dev) & 0x1f) == 0x10 ? 1 : 0);
+	embd_phy = ((dev->mii.phy_id & 0x1f) == 0x10 ? 1 : 0);
 
-	ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, embd_phy, 0, 0, NULL);
+	ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, embd_phy,
+			     0, 0, NULL, in_pm);
 	if (ret < 0) {
 		netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret);
 		goto out;
 	}
 
-	ret = asix_sw_reset(dev, AX_SWRESET_IPPD | AX_SWRESET_PRL);
-	if (ret < 0)
-		goto out;
+	if (embd_phy) {
+		ret = asix_sw_reset(dev, AX_SWRESET_IPPD, in_pm);
+		if (ret < 0)
+			goto out;
 
-	msleep(150);
+		usleep_range(10000, 11000);
 
-	ret = asix_sw_reset(dev, AX_SWRESET_CLEAR);
-	if (ret < 0)
-		goto out;
+		ret = asix_sw_reset(dev, AX_SWRESET_CLEAR, in_pm);
+		if (ret < 0)
+			goto out;
 
-	msleep(150);
+		msleep(60);
 
-	if (embd_phy) {
-		ret = asix_sw_reset(dev, AX_SWRESET_IPRL);
+		ret = asix_sw_reset(dev, AX_SWRESET_IPRL | AX_SWRESET_PRL,
+				    in_pm);
 		if (ret < 0)
 			goto out;
 	} else {
-		ret = asix_sw_reset(dev, AX_SWRESET_PRTE);
+		ret = asix_sw_reset(dev, AX_SWRESET_IPPD | AX_SWRESET_PRL,
+				    in_pm);
 		if (ret < 0)
 			goto out;
 	}
 
 	msleep(150);
-	rx_ctl = asix_read_rx_ctl(dev);
-	netdev_dbg(dev->net, "RX_CTL is 0x%04x after software reset\n", rx_ctl);
-	ret = asix_write_rx_ctl(dev, 0x0000);
+
+	if (in_pm && (!asix_mdio_read_nopm(dev->net, dev->mii.phy_id,
+					   MII_PHYSID1))){
+		ret = -EIO;
+		goto out;
+	}
+
+	ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, in_pm);
+	if (ret < 0)
+		goto out;
+
+	ret = asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT, in_pm);
 	if (ret < 0)
 		goto out;
 
-	rx_ctl = asix_read_rx_ctl(dev);
-	netdev_dbg(dev->net, "RX_CTL is 0x%04x setting to 0x0000\n", rx_ctl);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0,
+			     AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT,
+			     AX88772_IPG2_DEFAULT, 0, NULL, in_pm);
+	if (ret < 0) {
+		netdev_dbg(dev->net, "Write IPG,IPG1,IPG2 failed: %d\n", ret);
+		goto out;
+	}
 
-	ret = asix_sw_reset(dev, AX_SWRESET_PRL);
+	/* Rewrite MAC address */
+	ether_addr_copy(data->mac_addr, dev->net->dev_addr);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0,
+			     ETH_ALEN, data->mac_addr, in_pm);
 	if (ret < 0)
 		goto out;
 
-	msleep(150);
+	/* Set RX_CTL to default values with 2k buffer, and enable cactus */
+	ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, in_pm);
+	if (ret < 0)
+		goto out;
+
+	rx_ctl = asix_read_rx_ctl(dev, in_pm);
+	netdev_dbg(dev->net, "RX_CTL is 0x%04x after all initializations\n",
+		   rx_ctl);
+
+	rx_ctl = asix_read_medium_status(dev, in_pm);
+	netdev_dbg(dev->net,
+		   "Medium Status is 0x%04x after all initializations\n",
+		   rx_ctl);
+
+	return 0;
+
+out:
+	return ret;
+}
+
+static int ax88772a_hw_reset(struct usbnet *dev, int in_pm)
+{
+	struct asix_data *data = (struct asix_data *)&dev->data;
+	int ret, embd_phy;
+	u16 rx_ctl;
+	u8 chipcode = 0;
 
-	ret = asix_sw_reset(dev, AX_SWRESET_IPRL | AX_SWRESET_PRL);
+	ret = asix_write_gpio(dev, AX_GPIO_RSE, 5, in_pm);
 	if (ret < 0)
 		goto out;
 
-	msleep(150);
+	embd_phy = ((dev->mii.phy_id & 0x1f) == 0x10 ? 1 : 0);
 
-	asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
-	asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
-			ADVERTISE_ALL | ADVERTISE_CSMA);
-	mii_nway_restart(&dev->mii);
+	ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, embd_phy |
+			     AX_PHYSEL_SSEN, 0, 0, NULL, in_pm);
+	if (ret < 0) {
+		netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret);
+		goto out;
+	}
+	usleep_range(10000, 11000);
 
-	ret = asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT);
+	ret = asix_sw_reset(dev, AX_SWRESET_IPPD | AX_SWRESET_IPRL, in_pm);
 	if (ret < 0)
 		goto out;
 
+	usleep_range(10000, 11000);
+
+	ret = asix_sw_reset(dev, AX_SWRESET_IPRL, in_pm);
+	if (ret < 0)
+		goto out;
+
+	msleep(160);
+
+	ret = asix_sw_reset(dev, AX_SWRESET_CLEAR, in_pm);
+	if (ret < 0)
+		goto out;
+
+	ret = asix_sw_reset(dev, AX_SWRESET_IPRL, in_pm);
+	if (ret < 0)
+		goto out;
+
+	msleep(200);
+
+	if (in_pm && (!asix_mdio_read_nopm(dev->net, dev->mii.phy_id,
+					   MII_PHYSID1))) {
+		ret = -1;
+		goto out;
+	}
+
+	ret = asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0,
+			    0, 1, &chipcode, in_pm);
+	if (ret < 0)
+		goto out;
+
+	if ((chipcode & AX_CHIPCODE_MASK) == AX_AX88772B_CHIPCODE) {
+		ret = asix_write_cmd(dev, AX_QCTCTRL, 0x8000, 0x8001,
+				     0, NULL, in_pm);
+		if (ret < 0) {
+			netdev_dbg(dev->net, "Write BQ setting failed: %d\n",
+				   ret);
+			goto out;
+		}
+	}
+
 	ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0,
 				AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT,
-				AX88772_IPG2_DEFAULT, 0, NULL);
+				AX88772_IPG2_DEFAULT, 0, NULL, in_pm);
 	if (ret < 0) {
 		netdev_dbg(dev->net, "Write IPG,IPG1,IPG2 failed: %d\n", ret);
 		goto out;
@@ -378,20 +493,29 @@ static int ax88772_reset(struct usbnet *dev)
 	/* Rewrite MAC address */
 	memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN);
 	ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
-							data->mac_addr);
+							data->mac_addr, in_pm);
+	if (ret < 0)
+		goto out;
+
+	/* Set RX_CTL to default values with 2k buffer, and enable cactus */
+	ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, in_pm);
 	if (ret < 0)
 		goto out;
 
+	ret = asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT, in_pm);
+	if (ret < 0)
+		return ret;
+
 	/* Set RX_CTL to default values with 2k buffer, and enable cactus */
-	ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL);
+	ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, in_pm);
 	if (ret < 0)
 		goto out;
 
-	rx_ctl = asix_read_rx_ctl(dev);
+	rx_ctl = asix_read_rx_ctl(dev, in_pm);
 	netdev_dbg(dev->net, "RX_CTL is 0x%04x after all initializations\n",
 		   rx_ctl);
 
-	rx_ctl = asix_read_medium_status(dev);
+	rx_ctl = asix_read_medium_status(dev, in_pm);
 	netdev_dbg(dev->net,
 		   "Medium Status is 0x%04x after all initializations\n",
 		   rx_ctl);
@@ -400,7 +524,6 @@ static int ax88772_reset(struct usbnet *dev)
 
 out:
 	return ret;
-
 }
 
 static const struct net_device_ops ax88772_netdev_ops = {
@@ -415,11 +538,87 @@ static const struct net_device_ops ax88772_netdev_ops = {
 	.ndo_set_rx_mode        = asix_set_multicast,
 };
 
+static void ax88772_suspend(struct usbnet *dev)
+{
+	struct asix_common_private *priv = dev->driver_priv;
+
+	/* Preserve BMCR for restoring */
+	priv->presvd_phy_bmcr =
+		asix_mdio_read_nopm(dev->net, dev->mii.phy_id, MII_BMCR);
+
+	/* Preserve ANAR for restoring */
+	priv->presvd_phy_advertise =
+		asix_mdio_read_nopm(dev->net, dev->mii.phy_id, MII_ADVERTISE);
+}
+
+static int asix_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	struct usbnet *dev = usb_get_intfdata(intf);
+	struct asix_common_private *priv = dev->driver_priv;
+
+	if (priv->suspend)
+		priv->suspend(dev);
+
+	return usbnet_suspend(intf, message);
+}
+
+static void ax88772_restore_phy(struct usbnet *dev)
+{
+	struct asix_common_private *priv = dev->driver_priv;
+
+	if (priv->presvd_phy_advertise) {
+		/* Restore Advertisement control reg */
+		asix_mdio_write_nopm(dev->net, dev->mii.phy_id, MII_ADVERTISE,
+				     priv->presvd_phy_advertise);
+
+		/* Restore BMCR */
+		asix_mdio_write_nopm(dev->net, dev->mii.phy_id, MII_BMCR,
+				     priv->presvd_phy_bmcr);
+
+		priv->presvd_phy_advertise = 0;
+		priv->presvd_phy_bmcr = 0;
+	}
+}
+
+static void ax88772_resume(struct usbnet *dev)
+{
+	int i;
+
+	for (i = 0; i < 3; i++)
+		if (!ax88772_hw_reset(dev, 1))
+			break;
+	ax88772_restore_phy(dev);
+}
+
+static void ax88772a_resume(struct usbnet *dev)
+{
+	int i;
+
+	for (i = 0; i < 3; i++) {
+		if (!ax88772a_hw_reset(dev, 1))
+			break;
+	}
+
+	ax88772_restore_phy(dev);
+}
+
+static int asix_resume(struct usb_interface *intf)
+{
+	struct usbnet *dev = usb_get_intfdata(intf);
+	struct asix_common_private *priv = dev->driver_priv;
+
+	if (priv->resume)
+		priv->resume(dev);
+
+	return usbnet_resume(intf);
+}
+
 static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
 {
-	int ret, embd_phy, i;
-	u8 buf[ETH_ALEN];
+	int ret, i;
+	u8 buf[ETH_ALEN], chipcode = 0;
 	u32 phyid;
+	struct asix_common_private *priv;
 
 	usbnet_get_endpoints(dev,intf);
 
@@ -427,13 +626,13 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
 	if (dev->driver_info->data & FLAG_EEPROM_MAC) {
 		for (i = 0; i < (ETH_ALEN >> 1); i++) {
 			ret = asix_read_cmd(dev, AX_CMD_READ_EEPROM, 0x04 + i,
-					0, 2, buf + i * 2);
+					    0, 2, buf + i * 2, 0);
 			if (ret < 0)
 				break;
 		}
 	} else {
 		ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID,
-				0, 0, ETH_ALEN, buf);
+				0, 0, ETH_ALEN, buf, 0);
 	}
 
 	if (ret < 0) {
@@ -456,16 +655,11 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
 	dev->net->needed_headroom = 4; /* cf asix_tx_fixup() */
 	dev->net->needed_tailroom = 4; /* cf asix_tx_fixup() */
 
-	embd_phy = ((dev->mii.phy_id & 0x1f) == 0x10 ? 1 : 0);
+	asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1, &chipcode, 0);
+	chipcode &= AX_CHIPCODE_MASK;
 
-	/* Reset the PHY to normal operation mode */
-	ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, embd_phy, 0, 0, NULL);
-	if (ret < 0) {
-		netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret);
-		return ret;
-	}
-
-	ax88772_reset(dev);
+	(chipcode == AX_AX88772_CHIPCODE) ? ax88772_hw_reset(dev, 0) :
+					    ax88772a_hw_reset(dev, 0);
 
 	/* Read PHYID register *AFTER* the PHY was reset properly */
 	phyid = asix_get_phyid(dev);
@@ -482,6 +676,18 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
 	if (!dev->driver_priv)
 		return -ENOMEM;
 
+	priv = dev->driver_priv;
+
+	priv->presvd_phy_bmcr = 0;
+	priv->presvd_phy_advertise = 0;
+	if (chipcode == AX_AX88772_CHIPCODE) {
+		priv->resume = ax88772_resume;
+		priv->suspend = ax88772_suspend;
+	} else {
+		priv->resume = ax88772a_resume;
+		priv->suspend = ax88772_suspend;
+	}
+
 	return 0;
 }
 
@@ -593,12 +799,12 @@ static int ax88178_reset(struct usbnet *dev)
 	int gpio0 = 0;
 	u32 phyid;
 
-	asix_read_cmd(dev, AX_CMD_READ_GPIOS, 0, 0, 1, &status);
+	asix_read_cmd(dev, AX_CMD_READ_GPIOS, 0, 0, 1, &status, 0);
 	netdev_dbg(dev->net, "GPIO Status: 0x%04x\n", status);
 
-	asix_write_cmd(dev, AX_CMD_WRITE_ENABLE, 0, 0, 0, NULL);
-	asix_read_cmd(dev, AX_CMD_READ_EEPROM, 0x0017, 0, 2, &eeprom);
-	asix_write_cmd(dev, AX_CMD_WRITE_DISABLE, 0, 0, 0, NULL);
+	asix_write_cmd(dev, AX_CMD_WRITE_ENABLE, 0, 0, 0, NULL, 0);
+	asix_read_cmd(dev, AX_CMD_READ_EEPROM, 0x0017, 0, 2, &eeprom, 0);
+	asix_write_cmd(dev, AX_CMD_WRITE_DISABLE, 0, 0, 0, NULL, 0);
 
 	netdev_dbg(dev->net, "EEPROM index 0x17 is 0x%04x\n", eeprom);
 
@@ -614,15 +820,16 @@ static int ax88178_reset(struct usbnet *dev)
 	netdev_dbg(dev->net, "GPIO0: %d, PhyMode: %d\n", gpio0, data->phymode);
 
 	/* Power up external GigaPHY through AX88178 GPIO pin */
-	asix_write_gpio(dev, AX_GPIO_RSE | AX_GPIO_GPO_1 | AX_GPIO_GPO1EN, 40);
+	asix_write_gpio(dev, AX_GPIO_RSE | AX_GPIO_GPO_1 |
+			AX_GPIO_GPO1EN, 40, 0);
 	if ((le16_to_cpu(eeprom) >> 8) != 1) {
-		asix_write_gpio(dev, 0x003c, 30);
-		asix_write_gpio(dev, 0x001c, 300);
-		asix_write_gpio(dev, 0x003c, 30);
+		asix_write_gpio(dev, 0x003c, 30, 0);
+		asix_write_gpio(dev, 0x001c, 300, 0);
+		asix_write_gpio(dev, 0x003c, 30, 0);
 	} else {
 		netdev_dbg(dev->net, "gpio phymode == 1 path\n");
-		asix_write_gpio(dev, AX_GPIO_GPO1EN, 30);
-		asix_write_gpio(dev, AX_GPIO_GPO1EN | AX_GPIO_GPO_1, 30);
+		asix_write_gpio(dev, AX_GPIO_GPO1EN, 30, 0);
+		asix_write_gpio(dev, AX_GPIO_GPO1EN | AX_GPIO_GPO_1, 30, 0);
 	}
 
 	/* Read PHYID register *AFTER* powering up PHY */
@@ -630,15 +837,15 @@ static int ax88178_reset(struct usbnet *dev)
 	netdev_dbg(dev->net, "PHYID=0x%08x\n", phyid);
 
 	/* Set AX88178 to enable MII/GMII/RGMII interface for external PHY */
-	asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, 0, 0, 0, NULL);
+	asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, 0, 0, 0, NULL, 0);
 
-	asix_sw_reset(dev, 0);
+	asix_sw_reset(dev, 0, 0);
 	msleep(150);
 
-	asix_sw_reset(dev, AX_SWRESET_PRL | AX_SWRESET_IPPD);
+	asix_sw_reset(dev, AX_SWRESET_PRL | AX_SWRESET_IPPD, 0);
 	msleep(150);
 
-	asix_write_rx_ctl(dev, 0);
+	asix_write_rx_ctl(dev, 0, 0);
 
 	if (data->phymode == PHY_MODE_MARVELL) {
 		marvell_phy_init(dev);
@@ -655,18 +862,18 @@ static int ax88178_reset(struct usbnet *dev)
 
 	mii_nway_restart(&dev->mii);
 
-	ret = asix_write_medium_mode(dev, AX88178_MEDIUM_DEFAULT);
+	ret = asix_write_medium_mode(dev, AX88178_MEDIUM_DEFAULT, 0);
 	if (ret < 0)
 		return ret;
 
 	/* Rewrite MAC address */
 	memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN);
 	ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
-							data->mac_addr);
+							data->mac_addr, 0);
 	if (ret < 0)
 		return ret;
 
-	ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL);
+	ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, 0);
 	if (ret < 0)
 		return ret;
 
@@ -704,7 +911,7 @@ static int ax88178_link_reset(struct usbnet *dev)
 	netdev_dbg(dev->net, "ax88178_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n",
 		   speed, ecmd.duplex, mode);
 
-	asix_write_medium_mode(dev, mode);
+	asix_write_medium_mode(dev, mode, 0);
 
 	if (data->phymode == PHY_MODE_MARVELL && data->ledmode)
 		marvell_led_status(dev, speed);
@@ -733,15 +940,15 @@ static void ax88178_set_mfb(struct usbnet *dev)
 		mfb = AX_RX_CTL_MFB_16384;
 	}
 
-	rxctl = asix_read_rx_ctl(dev);
-	asix_write_rx_ctl(dev, (rxctl & ~AX_RX_CTL_MFB_16384) | mfb);
+	rxctl = asix_read_rx_ctl(dev, 0);
+	asix_write_rx_ctl(dev, (rxctl & ~AX_RX_CTL_MFB_16384) | mfb, 0);
 
-	medium = asix_read_medium_status(dev);
+	medium = asix_read_medium_status(dev, 0);
 	if (dev->net->mtu > 1500)
 		medium |= AX_MEDIUM_JFE;
 	else
 		medium &= ~AX_MEDIUM_JFE;
-	asix_write_medium_mode(dev, medium);
+	asix_write_medium_mode(dev, medium, 0);
 
 	if (dev->rx_urb_size > old_rx_urb_size)
 		usbnet_unlink_rx_urbs(dev);
@@ -790,7 +997,7 @@ static int ax88178_bind(struct usbnet *dev, struct usb_interface *intf)
 	usbnet_get_endpoints(dev,intf);
 
 	/* Get the MAC address */
-	ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf);
+	ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf, 0);
 	if (ret < 0) {
 		netdev_dbg(dev->net, "Failed to read MAC address: %d\n", ret);
 		return ret;
@@ -811,10 +1018,10 @@ static int ax88178_bind(struct usbnet *dev, struct usb_interface *intf)
 	dev->net->ethtool_ops = &ax88178_ethtool_ops;
 
 	/* Blink LEDS so users know driver saw dongle */
-	asix_sw_reset(dev, 0);
+	asix_sw_reset(dev, 0, 0);
 	msleep(150);
 
-	asix_sw_reset(dev, AX_SWRESET_PRL | AX_SWRESET_IPPD);
+	asix_sw_reset(dev, AX_SWRESET_PRL | AX_SWRESET_IPPD, 0);
 	msleep(150);
 
 	/* Asix framing packs multiple eth frames into a 2K usb bulk transfer */
@@ -877,7 +1084,7 @@ static const struct driver_info ax88772_info = {
 	.unbind = ax88772_unbind,
 	.status = asix_status,
 	.link_reset = ax88772_link_reset,
-	.reset = ax88772_link_reset,
+	.reset = ax88772_reset,
 	.flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR | FLAG_MULTI_PACKET,
 	.rx_fixup = asix_rx_fixup_common,
 	.tx_fixup = asix_tx_fixup,
@@ -1005,7 +1212,7 @@ static const struct usb_device_id	products [] = {
 }, {
 	// Lenovo U2L100P 10/100
 	USB_DEVICE (0x17ef, 0x7203),
-	.driver_info = (unsigned long) &ax88772_info,
+	.driver_info = (unsigned long)&ax88772b_info,
 }, {
 	// ASIX AX88772B 10/100
 	USB_DEVICE (0x0b95, 0x772b),
@@ -1073,7 +1280,7 @@ static const struct usb_device_id	products [] = {
 }, {
 	// Asus USB Ethernet Adapter
 	USB_DEVICE (0x0b95, 0x7e2b),
-	.driver_info = (unsigned long) &ax88772_info,
+	.driver_info = (unsigned long)&ax88772b_info,
 }, {
 	/* ASIX 88172a demo board */
 	USB_DEVICE(0x0b95, 0x172a),
@@ -1095,8 +1302,8 @@ static struct usb_driver asix_driver = {
 	.name =		DRIVER_NAME,
 	.id_table =	products,
 	.probe =	usbnet_probe,
-	.suspend =	usbnet_suspend,
-	.resume =	usbnet_resume,
+	.suspend =	asix_suspend,
+	.resume =	asix_resume,
 	.disconnect =	usbnet_disconnect,
 	.supports_autosuspend = 1,
 	.disable_hub_initiated_lpm = 1,
diff --git a/drivers/net/usb/ax88172a.c b/drivers/net/usb/ax88172a.c
index 163a2c5..49a3bc1 100644
--- a/drivers/net/usb/ax88172a.c
+++ b/drivers/net/usb/ax88172a.c
@@ -81,7 +81,7 @@ static void ax88172a_adjust_link(struct net_device *netdev)
 	}
 
 	if (mode != priv->oldmode) {
-		asix_write_medium_mode(dev, mode);
+		asix_write_medium_mode(dev, mode, 0);
 		priv->oldmode = mode;
 		netdev_dbg(netdev, "speed %u duplex %d, setting mode to 0x%04x\n",
 			   phydev->speed, phydev->duplex, mode);
@@ -176,18 +176,19 @@ static int ax88172a_reset_phy(struct usbnet *dev, int embd_phy)
 {
 	int ret;
 
-	ret = asix_sw_reset(dev, AX_SWRESET_IPPD);
+	ret = asix_sw_reset(dev, AX_SWRESET_IPPD, 0);
 	if (ret < 0)
 		goto err;
 
 	msleep(150);
-	ret = asix_sw_reset(dev, AX_SWRESET_CLEAR);
+	ret = asix_sw_reset(dev, AX_SWRESET_CLEAR, 0);
 	if (ret < 0)
 		goto err;
 
 	msleep(150);
 
-	ret = asix_sw_reset(dev, embd_phy ? AX_SWRESET_IPRL : AX_SWRESET_IPPD);
+	ret = asix_sw_reset(dev, embd_phy ? AX_SWRESET_IPRL : AX_SWRESET_IPPD,
+			    0);
 	if (ret < 0)
 		goto err;
 
@@ -213,7 +214,7 @@ static int ax88172a_bind(struct usbnet *dev, struct usb_interface *intf)
 	dev->driver_priv = priv;
 
 	/* Get the MAC address */
-	ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf);
+	ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf, 0);
 	if (ret < 0) {
 		netdev_err(dev->net, "Failed to read MAC address: %d\n", ret);
 		goto free;
@@ -224,7 +225,7 @@ static int ax88172a_bind(struct usbnet *dev, struct usb_interface *intf)
 	dev->net->ethtool_ops = &ax88172a_ethtool_ops;
 
 	/* are we using the internal or the external phy? */
-	ret = asix_read_cmd(dev, AX_CMD_SW_PHY_STATUS, 0, 0, 1, buf);
+	ret = asix_read_cmd(dev, AX_CMD_SW_PHY_STATUS, 0, 0, 1, buf, 0);
 	if (ret < 0) {
 		netdev_err(dev->net, "Failed to read software interface selection register: %d\n",
 			   ret);
@@ -303,20 +304,20 @@ static int ax88172a_reset(struct usbnet *dev)
 	ax88172a_reset_phy(dev, priv->use_embdphy);
 
 	msleep(150);
-	rx_ctl = asix_read_rx_ctl(dev);
+	rx_ctl = asix_read_rx_ctl(dev, 0);
 	netdev_dbg(dev->net, "RX_CTL is 0x%04x after software reset\n", rx_ctl);
-	ret = asix_write_rx_ctl(dev, 0x0000);
+	ret = asix_write_rx_ctl(dev, 0x0000, 0);
 	if (ret < 0)
 		goto out;
 
-	rx_ctl = asix_read_rx_ctl(dev);
+	rx_ctl = asix_read_rx_ctl(dev, 0);
 	netdev_dbg(dev->net, "RX_CTL is 0x%04x setting to 0x0000\n", rx_ctl);
 
 	msleep(150);
 
 	ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0,
 			     AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT,
-			     AX88772_IPG2_DEFAULT, 0, NULL);
+			     AX88772_IPG2_DEFAULT, 0, NULL, 0);
 	if (ret < 0) {
 		netdev_err(dev->net, "Write IPG,IPG1,IPG2 failed: %d\n", ret);
 		goto out;
@@ -325,20 +326,20 @@ static int ax88172a_reset(struct usbnet *dev)
 	/* Rewrite MAC address */
 	memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN);
 	ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
-			     data->mac_addr);
+			     data->mac_addr, 0);
 	if (ret < 0)
 		goto out;
 
 	/* Set RX_CTL to default values with 2k buffer, and enable cactus */
-	ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL);
+	ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, 0);
 	if (ret < 0)
 		goto out;
 
-	rx_ctl = asix_read_rx_ctl(dev);
+	rx_ctl = asix_read_rx_ctl(dev, 0);
 	netdev_dbg(dev->net, "RX_CTL is 0x%04x after all initializations\n",
 		   rx_ctl);
 
-	rx_ctl = asix_read_medium_status(dev);
+	rx_ctl = asix_read_medium_status(dev, 0);
 	netdev_dbg(dev->net, "Medium Status is 0x%04x after all initializations\n",
 		   rx_ctl);
 
-- 
git-series 0.8.10
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v3 2/5] net: asix: Avoid looping when the device is disconnected

[robert.foss-ZGY8ohtN/8qB+jHODAdFcQ]

From: Robert Foss <robert.foss-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>

From: Vincent Palatin <vpalatin-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>

Check the answers from the USB stack and avoid re-sending multiple times
the request if the device has disappeared.

Signed-off-by: Vincent Palatin <vpalatin-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
Signed-off-by: Robert Foss <robert.foss-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>
Tested-by: Robert Foss <robert.foss-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>
---
 drivers/net/usb/asix_common.c  | 56 +++++++++++++++++++++++++++--------
 drivers/net/usb/asix_devices.c |  2 +-
 2 files changed, 46 insertions(+), 12 deletions(-)

diff --git a/drivers/net/usb/asix_common.c b/drivers/net/usb/asix_common.c
index 25609ee..f79eb12 100644
--- a/drivers/net/usb/asix_common.c
+++ b/drivers/net/usb/asix_common.c
@@ -428,13 +428,21 @@ int asix_mdio_read(struct net_device *netdev, int phy_id, int loc)
 	__le16 res;
 	u8 smsr;
 	int i = 0;
+	int ret;
 
 	mutex_lock(&dev->phy_mutex);
 	do {
-		asix_set_sw_mii(dev, 0);
+		ret = asix_set_sw_mii(dev, 0);
+		if (ret == -ENODEV)
+			break;
 		usleep_range(1000, 1100);
-		asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1, &smsr, 0);
-	} while (!(smsr & AX_HOST_EN) && (i++ < 30));
+		ret = asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG,
+				    0, 0, 1, &smsr, 0);
+	} while (!(smsr & AX_HOST_EN) && (i++ < 30) && (ret != -ENODEV));
+	if (ret == -ENODEV) {
+		mutex_unlock(&dev->phy_mutex);
+		return ret;
+	}
 
 	asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id,
 				(__u16)loc, 2, &res, 0);
@@ -453,16 +461,24 @@ void asix_mdio_write(struct net_device *netdev, int phy_id, int loc, int val)
 	__le16 res = cpu_to_le16(val);
 	u8 smsr;
 	int i = 0;
+	int ret;
 
 	netdev_dbg(dev->net, "asix_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n",
 			phy_id, loc, val);
 
 	mutex_lock(&dev->phy_mutex);
 	do {
-		asix_set_sw_mii(dev, 0);
+		ret = asix_set_sw_mii(dev, 0);
+		if (ret == -ENODEV)
+			break;
 		usleep_range(1000, 1100);
-		asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1, &smsr, 0);
-	} while (!(smsr & AX_HOST_EN) && (i++ < 30));
+		ret = asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG,
+				    0, 0, 1, &smsr, 0);
+	} while (!(smsr & AX_HOST_EN) && (i++ < 30) && (ret != -ENODEV));
+	if (ret == -ENODEV) {
+		mutex_unlock(&dev->phy_mutex);
+		return;
+	}
 
 	asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id,
 		       (__u16)loc, 2, &res, 0);
@@ -476,13 +492,21 @@ int asix_mdio_read_nopm(struct net_device *netdev, int phy_id, int loc)
 	__le16 res;
 	u8 smsr;
 	int i = 0;
+	int ret;
 
 	mutex_lock(&dev->phy_mutex);
 	do {
-		asix_set_sw_mii(dev, 1);
+		ret = asix_set_sw_mii(dev, 1);
+		if (ret == -ENODEV)
+			break;
 		usleep_range(1000, 1100);
-		asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1, &smsr, 1);
-	} while (!(smsr & AX_HOST_EN) && (i++ < 30));
+		ret = asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG,
+				    0, 0, 1, &smsr, 1);
+	} while (!(smsr & AX_HOST_EN) && (i++ < 30) && (ret != -ENODEV));
+	if (ret == -ENODEV) {
+		mutex_unlock(&dev->phy_mutex);
+		return ret;
+	}
 
 	asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id,
 		      (__u16)loc, 2, &res, 1);
@@ -502,16 +526,24 @@ asix_mdio_write_nopm(struct net_device *netdev, int phy_id, int loc, int val)
 	__le16 res = cpu_to_le16(val);
 	u8 smsr;
 	int i = 0;
+	int ret;
 
 	netdev_dbg(dev->net, "asix_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n",
 			phy_id, loc, val);
 
 	mutex_lock(&dev->phy_mutex);
 	do {
-		asix_set_sw_mii(dev, 1);
+		ret = asix_set_sw_mii(dev, 1);
+		if (ret == -ENODEV)
+			break;
 		usleep_range(1000, 1100);
-		asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1, &smsr, 1);
-	} while (!(smsr & AX_HOST_EN) && (i++ < 30));
+		ret = asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG,
+				    0, 0, 1, &smsr, 1);
+	} while (!(smsr & AX_HOST_EN) && (i++ < 30) && (ret != -ENODEV));
+	if (ret == -ENODEV) {
+		mutex_unlock(&dev->phy_mutex);
+		return;
+	}
 
 	asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id,
 		       (__u16)loc, 2, &res, 1);
diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
index aaa4290..ebeb730 100644
--- a/drivers/net/usb/asix_devices.c
+++ b/drivers/net/usb/asix_devices.c
@@ -79,6 +79,8 @@ static u32 asix_get_phyid(struct usbnet *dev)
 	/* Poll for the rare case the FW or phy isn't ready yet.  */
 	for (i = 0; i < 100; i++) {
 		phy_reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID1);
+		if (phy_reg < 0)
+			return 0;
 		if (phy_reg != 0 && phy_reg != 0xFFFF)
 			break;
 		mdelay(1);
-- 
git-series 0.8.10
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v3 3/5] net: asix: Fix AX88772x resume failures

[robert.foss-ZGY8ohtN/8qB+jHODAdFcQ]

From: Robert Foss <robert.foss-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>

From: Allan Chou <allan-knRN6Y/kmf1NUHwG+Fw1Kw@public.gmane.org>

The change fixes AX88772x resume failure by
- Restore incorrect AX88772A PHY registers when resetting
- Need to stop MAC operation when suspending
- Need to restart MII when restoring PHY

Signed-off-by: Allan Chou <allan-knRN6Y/kmf1NUHwG+Fw1Kw@public.gmane.org>
Signed-off-by: Robert Foss <robert.foss-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>
Tested-by: Robert Foss <robert.foss-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>
---
 drivers/net/usb/asix_devices.c | 47 ++++++++++++++++++++++++++++++++++-
 1 file changed, 46 insertions(+), 1 deletion(-)

diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
index ebeb730..083dc2e 100644
--- a/drivers/net/usb/asix_devices.c
+++ b/drivers/net/usb/asix_devices.c
@@ -35,6 +35,15 @@
 
 #define	PHY_MODE_RTL8211CL	0x000C
 
+#define AX88772A_PHY14H		0x14
+#define AX88772A_PHY14H_DEFAULT 0x442C
+
+#define AX88772A_PHY15H		0x15
+#define AX88772A_PHY15H_DEFAULT 0x03C8
+
+#define AX88772A_PHY16H		0x16
+#define AX88772A_PHY16H_DEFAULT 0x4044
+
 struct ax88172_int_data {
 	__le16 res1;
 	u8 link;
@@ -424,7 +433,7 @@ static int ax88772a_hw_reset(struct usbnet *dev, int in_pm)
 {
 	struct asix_data *data = (struct asix_data *)&dev->data;
 	int ret, embd_phy;
-	u16 rx_ctl;
+	u16 rx_ctl, phy14h, phy15h, phy16h;
 	u8 chipcode = 0;
 
 	ret = asix_write_gpio(dev, AX_GPIO_RSE, 5, in_pm);
@@ -482,6 +491,32 @@ static int ax88772a_hw_reset(struct usbnet *dev, int in_pm)
 				   ret);
 			goto out;
 		}
+	} else if ((chipcode & AX_CHIPCODE_MASK) == AX_AX88772A_CHIPCODE) {
+		/* Check if the PHY registers have default settings */
+		phy14h = asix_mdio_read_nopm(dev->net, dev->mii.phy_id,
+					     AX88772A_PHY14H);
+		phy15h = asix_mdio_read_nopm(dev->net, dev->mii.phy_id,
+					     AX88772A_PHY15H);
+		phy16h = asix_mdio_read_nopm(dev->net, dev->mii.phy_id,
+					     AX88772A_PHY16H);
+
+		netdev_dbg(dev->net,
+			   "772a_hw_reset: MR20=0x%x MR21=0x%x MR22=0x%x\n",
+			   phy14h, phy15h, phy16h);
+
+		/* Restore PHY registers default setting if not */
+		if (phy14h != AX88772A_PHY14H_DEFAULT)
+			asix_mdio_write_nopm(dev->net, dev->mii.phy_id,
+					     AX88772A_PHY14H,
+					     AX88772A_PHY14H_DEFAULT);
+		if (phy15h != AX88772A_PHY15H_DEFAULT)
+			asix_mdio_write_nopm(dev->net, dev->mii.phy_id,
+					     AX88772A_PHY15H,
+					     AX88772A_PHY15H_DEFAULT);
+		if (phy16h != AX88772A_PHY16H_DEFAULT)
+			asix_mdio_write_nopm(dev->net, dev->mii.phy_id,
+					     AX88772A_PHY16H,
+					     AX88772A_PHY16H_DEFAULT);
 	}
 
 	ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0,
@@ -543,6 +578,15 @@ static const struct net_device_ops ax88772_netdev_ops = {
 static void ax88772_suspend(struct usbnet *dev)
 {
 	struct asix_common_private *priv = dev->driver_priv;
+	u16 medium;
+
+	/* Stop MAC operation */
+	medium = asix_read_medium_status(dev, 0);
+	medium &= ~AX_MEDIUM_RE;
+	asix_write_medium_mode(dev, medium, 0);
+
+	netdev_dbg(dev->net, "ax88772_suspend: medium=0x%04x\n",
+		   asix_read_medium_status(dev, 0));
 
 	/* Preserve BMCR for restoring */
 	priv->presvd_phy_bmcr =
@@ -577,6 +621,7 @@ static void ax88772_restore_phy(struct usbnet *dev)
 		asix_mdio_write_nopm(dev->net, dev->mii.phy_id, MII_BMCR,
 				     priv->presvd_phy_bmcr);
 
+		mii_nway_restart(&dev->mii);
 		priv->presvd_phy_advertise = 0;
 		priv->presvd_phy_bmcr = 0;
 	}
-- 
git-series 0.8.10
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v3 4/5] net: asix: see 802.3 spec for phy reset

[robert.foss-ZGY8ohtN/8qB+jHODAdFcQ]

From: Robert Foss <robert.foss-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>

From: Grant Grundler <grundler-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>

https://lkml.org/lkml/2014/11/11/947

Ben Hutchings is correct. IEEE 802.3 spec section "22.2.4.1.1 Reset" requires
up to 500ms delay. Mitigate the "max" delay by polling the phy until BCM_RESET
bit is clear.

Signed-off-by: Grant Grundler <grundler-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
Signed-off-by: Robert Foss <robert.foss-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>
Tested-by: Robert Foss <robert.foss-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>
---
 drivers/net/usb/asix_devices.c | 27 ++++++++++++++++++++++++---
 1 file changed, 24 insertions(+), 3 deletions(-)

diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
index 083dc2e..dbcdda2 100644
--- a/drivers/net/usb/asix_devices.c
+++ b/drivers/net/usb/asix_devices.c
@@ -212,6 +212,28 @@ static const struct net_device_ops ax88172_netdev_ops = {
 	.ndo_set_rx_mode	= ax88172_set_multicast,
 };
 
+static void asix_phy_reset(struct usbnet *dev, unsigned int reset_bits)
+{
+	unsigned int timeout = 5000;
+
+	asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, reset_bits);
+
+	/* give phy_id a chance to process reset */
+	udelay(500);
+
+	/* See IEEE 802.3 "22.2.4.1.1 Reset": 500ms max */
+	while (timeout--) {
+		if (asix_mdio_read(dev->net, dev->mii.phy_id, MII_BMCR)
+							& BMCR_RESET)
+			udelay(100);
+		else
+			return;
+	}
+
+	netdev_err(dev->net, "BMCR_RESET timeout on phy_id %d\n",
+		   dev->mii.phy_id);
+}
+
 static int ax88172_bind(struct usbnet *dev, struct usb_interface *intf)
 {
 	int ret = 0;
@@ -258,7 +280,7 @@ static int ax88172_bind(struct usbnet *dev, struct usb_interface *intf)
 	dev->net->needed_headroom = 4; /* cf asix_tx_fixup() */
 	dev->net->needed_tailroom = 4; /* cf asix_tx_fixup() */
 
-	asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
+	asix_phy_reset(dev, BMCR_RESET);
 	asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
 		ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
 	mii_nway_restart(&dev->mii);
@@ -900,8 +922,7 @@ static int ax88178_reset(struct usbnet *dev)
 	} else if (data->phymode == PHY_MODE_RTL8211CL)
 		rtl8211cl_phy_init(dev);
 
-	asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR,
-			BMCR_RESET | BMCR_ANENABLE);
+	asix_phy_reset(dev, BMCR_RESET | BMCR_ANENABLE);
 	asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
 			ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
 	asix_mdio_write(dev->net, dev->mii.phy_id, MII_CTRL1000,
-- 
git-series 0.8.10
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v3 5/5] net: asix: autoneg will set WRITE_MEDIUM reg

[robert.foss-ZGY8ohtN/8qB+jHODAdFcQ]

From: Robert Foss <robert.foss-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>

From: Grant Grundler <grundler-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>

The miii_nway_restart() causes a PHY link change activity and
ax88772_link_reset will be called. link_reset will set
AX_CMD_WRITE_MEDIUM_MODE register correctly.

The asix_write_medium_mode in reset() fills in a default value to the register
which may be different from the negotiation result. So do this first.

Ignore the ret value since it's ignored in XXX_link_reset() functions.

Signed-off-by: Grant Grundler <grundler-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org>
Signed-off-by: Robert Foss <robert.foss-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>
Tested-by: Robert Foss <robert.foss-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>
---
 drivers/net/usb/asix_devices.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
index dbcdda2..cce2495 100644
--- a/drivers/net/usb/asix_devices.c
+++ b/drivers/net/usb/asix_devices.c
@@ -928,12 +928,9 @@ static int ax88178_reset(struct usbnet *dev)
 	asix_mdio_write(dev->net, dev->mii.phy_id, MII_CTRL1000,
 			ADVERTISE_1000FULL);
 
+	asix_write_medium_mode(dev, AX88178_MEDIUM_DEFAULT, 0);
 	mii_nway_restart(&dev->mii);
 
-	ret = asix_write_medium_mode(dev, AX88178_MEDIUM_DEFAULT, 0);
-	if (ret < 0)
-		return ret;

[PATCH v3 4/5] net: asix: see 802.3 spec for phy reset

[robert.foss]

From: Robert Foss <robert.foss@collabora.com>

From: Grant Grundler <grundler@chromium.org>

https://lkml.org/lkml/2014/11/11/947

Ben Hutchings is correct. IEEE 802.3 spec section "22.2.4.1.1 Reset" requires
up to 500ms delay. Mitigate the "max" delay by polling the phy until BCM_RESET
bit is clear.

Signed-off-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: Robert Foss <robert.foss@collabora.com>
Tested-by: Robert Foss <robert.foss@collabora.com>
---
 drivers/net/usb/asix_devices.c | 27 ++++++++++++++++++++++++---
 1 file changed, 24 insertions(+), 3 deletions(-)

diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
index 083dc2e..dbcdda2 100644
--- a/drivers/net/usb/asix_devices.c
+++ b/drivers/net/usb/asix_devices.c
@@ -212,6 +212,28 @@ static const struct net_device_ops ax88172_netdev_ops = {
 	.ndo_set_rx_mode	= ax88172_set_multicast,
 };
 
+static void asix_phy_reset(struct usbnet *dev, unsigned int reset_bits)
+{
+	unsigned int timeout = 5000;
+
+	asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, reset_bits);
+
+	/* give phy_id a chance to process reset */
+	udelay(500);
+
+	/* See IEEE 802.3 "22.2.4.1.1 Reset": 500ms max */
+	while (timeout--) {
+		if (asix_mdio_read(dev->net, dev->mii.phy_id, MII_BMCR)
+							& BMCR_RESET)
+			udelay(100);
+		else
+			return;
+	}
+
+	netdev_err(dev->net, "BMCR_RESET timeout on phy_id %d\n",
+		   dev->mii.phy_id);
+}
+
 static int ax88172_bind(struct usbnet *dev, struct usb_interface *intf)
 {
 	int ret = 0;
@@ -258,7 +280,7 @@ static int ax88172_bind(struct usbnet *dev, struct usb_interface *intf)
 	dev->net->needed_headroom = 4; /* cf asix_tx_fixup() */
 	dev->net->needed_tailroom = 4; /* cf asix_tx_fixup() */
 
-	asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
+	asix_phy_reset(dev, BMCR_RESET);
 	asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
 		ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
 	mii_nway_restart(&dev->mii);
@@ -900,8 +922,7 @@ static int ax88178_reset(struct usbnet *dev)
 	} else if (data->phymode == PHY_MODE_RTL8211CL)
 		rtl8211cl_phy_init(dev);
 
-	asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR,
-			BMCR_RESET | BMCR_ANENABLE);
+	asix_phy_reset(dev, BMCR_RESET | BMCR_ANENABLE);
 	asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
 			ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
 	asix_mdio_write(dev->net, dev->mii.phy_id, MII_CTRL1000,
-- 
git-series 0.8.10

[PATCH v3 5/5] net: asix: autoneg will set WRITE_MEDIUM reg

[robert.foss]

From: Robert Foss <robert.foss@collabora.com>

From: Grant Grundler <grundler@chromium.org>

The miii_nway_restart() causes a PHY link change activity and
ax88772_link_reset will be called. link_reset will set
AX_CMD_WRITE_MEDIUM_MODE register correctly.

The asix_write_medium_mode in reset() fills in a default value to the register
which may be different from the negotiation result. So do this first.

Ignore the ret value since it's ignored in XXX_link_reset() functions.

Signed-off-by: Grant Grundler <grundler@google.com>
Signed-off-by: Robert Foss <robert.foss@collabora.com>
Tested-by: Robert Foss <robert.foss@collabora.com>
---
 drivers/net/usb/asix_devices.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
index dbcdda2..cce2495 100644
--- a/drivers/net/usb/asix_devices.c
+++ b/drivers/net/usb/asix_devices.c
@@ -928,12 +928,9 @@ static int ax88178_reset(struct usbnet *dev)
 	asix_mdio_write(dev->net, dev->mii.phy_id, MII_CTRL1000,
 			ADVERTISE_1000FULL);
 
+	asix_write_medium_mode(dev, AX88178_MEDIUM_DEFAULT, 0);
 	mii_nway_restart(&dev->mii);
 
-	ret = asix_write_medium_mode(dev, AX88178_MEDIUM_DEFAULT, 0);
-	if (ret < 0)
-		return ret;
-
 	/* Rewrite MAC address */
 	memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN);
 	ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
-- 
git-series 0.8.10

[PATCH v3 1/5] net: asix: Add in_pm parameter

[robert.foss]

From: Freddy Xin <freddy@asix.com.tw>

In order to R/W registers in suspend/resume functions, in_pm flags are
added to some functions to determine whether the nopm version of usb
functions is called.

Save BMCR and ANAR PHY registers in suspend function and restore them
in resume function.

Reset HW in resume function to ensure the PHY works correctly.

Signed-off-by: Freddy Xin <freddy@asix.com.tw>
Signed-off-by: Robert Foss <robert.foss@collabora.com>
Tested-by: Robert Foss <robert.foss@collabora.com>
---
 drivers/net/usb/asix.h         |  40 +++--
 drivers/net/usb/asix_common.c  | 180 +++++++++++++++-----
 drivers/net/usb/asix_devices.c | 373 ++++++++++++++++++++++++++++++++---------
 drivers/net/usb/ax88172a.c     |  29 ++--
 4 files changed, 472 insertions(+), 150 deletions(-)

diff --git a/drivers/net/usb/asix.h b/drivers/net/usb/asix.h
index a2d3ea6..d109242 100644
--- a/drivers/net/usb/asix.h
+++ b/drivers/net/usb/asix.h
@@ -46,6 +46,7 @@
 #define AX_CMD_SET_SW_MII		0x06
 #define AX_CMD_READ_MII_REG		0x07
 #define AX_CMD_WRITE_MII_REG		0x08
+#define AX_CMD_STATMNGSTS_REG		0x09
 #define AX_CMD_SET_HW_MII		0x0a
 #define AX_CMD_READ_EEPROM		0x0b
 #define AX_CMD_WRITE_EEPROM		0x0c
@@ -71,6 +72,17 @@
 #define AX_CMD_SW_RESET			0x20
 #define AX_CMD_SW_PHY_STATUS		0x21
 #define AX_CMD_SW_PHY_SELECT		0x22
+#define AX_QCTCTRL			0x2A
+
+#define AX_CHIPCODE_MASK		0x70
+#define AX_AX88772_CHIPCODE		0x00
+#define AX_AX88772A_CHIPCODE		0x10
+#define AX_AX88772B_CHIPCODE		0x20
+#define AX_HOST_EN			0x01
+
+#define AX_PHYSEL_PSEL			0x01
+#define AX_PHYSEL_SSMII			0
+#define AX_PHYSEL_SSEN			0x10
 
 #define AX_PHY_SELECT_MASK		(BIT(3) | BIT(2))
 #define AX_PHY_SELECT_INTERNAL		0
@@ -173,6 +185,10 @@ struct asix_rx_fixup_info {
 };
 
 struct asix_common_private {
+	void (*resume)(struct usbnet *dev);
+	void (*suspend)(struct usbnet *dev);
+	u16 presvd_phy_advertise;
+	u16 presvd_phy_bmcr;
 	struct asix_rx_fixup_info rx_fixup_info;
 };
 
@@ -182,10 +198,10 @@ extern const struct driver_info ax88172a_info;
 #define FLAG_EEPROM_MAC		(1UL << 0)  /* init device MAC from eeprom */
 
 int asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
-		  u16 size, void *data);
+		  u16 size, void *data, int in_pm);
 
 int asix_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
-		   u16 size, void *data);
+		   u16 size, void *data, int in_pm);
 
 void asix_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value,
 			  u16 index, u16 size, void *data);
@@ -197,27 +213,31 @@ int asix_rx_fixup_common(struct usbnet *dev, struct sk_buff *skb);
 struct sk_buff *asix_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
 			      gfp_t flags);
 
-int asix_set_sw_mii(struct usbnet *dev);
-int asix_set_hw_mii(struct usbnet *dev);
+int asix_set_sw_mii(struct usbnet *dev, int in_pm);
+int asix_set_hw_mii(struct usbnet *dev, int in_pm);
 
 int asix_read_phy_addr(struct usbnet *dev, int internal);
 int asix_get_phy_addr(struct usbnet *dev);
 
-int asix_sw_reset(struct usbnet *dev, u8 flags);
+int asix_sw_reset(struct usbnet *dev, u8 flags, int in_pm);
 
-u16 asix_read_rx_ctl(struct usbnet *dev);
-int asix_write_rx_ctl(struct usbnet *dev, u16 mode);
+u16 asix_read_rx_ctl(struct usbnet *dev, int in_pm);
+int asix_write_rx_ctl(struct usbnet *dev, u16 mode, int in_pm);
 
-u16 asix_read_medium_status(struct usbnet *dev);
-int asix_write_medium_mode(struct usbnet *dev, u16 mode);
+u16 asix_read_medium_status(struct usbnet *dev, int in_pm);
+int asix_write_medium_mode(struct usbnet *dev, u16 mode, int in_pm);
 
-int asix_write_gpio(struct usbnet *dev, u16 value, int sleep);
+int asix_write_gpio(struct usbnet *dev, u16 value, int sleep, int in_pm);
 
 void asix_set_multicast(struct net_device *net);
 
 int asix_mdio_read(struct net_device *netdev, int phy_id, int loc);
 void asix_mdio_write(struct net_device *netdev, int phy_id, int loc, int val);
 
+int asix_mdio_read_nopm(struct net_device *netdev, int phy_id, int loc);
+void asix_mdio_write_nopm(struct net_device *netdev, int phy_id, int loc,
+			  int val);
+
 void asix_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo);
 int asix_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo);
 
diff --git a/drivers/net/usb/asix_common.c b/drivers/net/usb/asix_common.c
index 7de5ab5..25609ee 100644
--- a/drivers/net/usb/asix_common.c
+++ b/drivers/net/usb/asix_common.c
@@ -22,24 +22,49 @@
 #include "asix.h"
 
 int asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
-		  u16 size, void *data)
+		  u16 size, void *data, int in_pm)
 {
 	int ret;
-	ret = usbnet_read_cmd(dev, cmd,
-			       USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-			       value, index, data, size);
+	int (*fn)(struct usbnet *, u8, u8, u16, u16, void *, u16);
+
+	BUG_ON(!dev);
+
+	if (!in_pm)
+		fn = usbnet_read_cmd;
+	else
+		fn = usbnet_read_cmd_nopm;
+
+	ret = fn(dev, cmd, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+		 value, index, data, size);
+
+	if (unlikely(ret < 0))
+		netdev_warn(dev->net, "Failed to read reg index 0x%04x: %d\n",
+			    index, ret);
 
-	if (ret != size && ret >= 0)
-		return -EINVAL;
 	return ret;
 }
 
 int asix_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
-		   u16 size, void *data)
+		   u16 size, void *data, int in_pm)
 {
-	return usbnet_write_cmd(dev, cmd,
-				USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-				value, index, data, size);
+	int ret;
+	int (*fn)(struct usbnet *, u8, u8, u16, u16, const void *, u16);
+
+	BUG_ON(!dev);
+
+	if (!in_pm)
+		fn = usbnet_write_cmd;
+	else
+		fn = usbnet_write_cmd_nopm;
+
+	ret = fn(dev, cmd, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+		 value, index, data, size);
+
+	if (unlikely(ret < 0))
+		netdev_warn(dev->net, "Failed to write reg index 0x%04x: %d\n",
+			    index, ret);
+
+	return ret;
 }
 
 void asix_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index,
@@ -225,19 +250,20 @@ struct sk_buff *asix_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
 	return skb;
 }
 
-int asix_set_sw_mii(struct usbnet *dev)
+int asix_set_sw_mii(struct usbnet *dev, int in_pm)
 {
 	int ret;
-	ret = asix_write_cmd(dev, AX_CMD_SET_SW_MII, 0x0000, 0, 0, NULL);
+	ret = asix_write_cmd(dev, AX_CMD_SET_SW_MII, 0x0000, 0, 0, NULL, in_pm);
+
 	if (ret < 0)
 		netdev_err(dev->net, "Failed to enable software MII access\n");
 	return ret;
 }
 
-int asix_set_hw_mii(struct usbnet *dev)
+int asix_set_hw_mii(struct usbnet *dev, int in_pm)
 {
 	int ret;
-	ret = asix_write_cmd(dev, AX_CMD_SET_HW_MII, 0x0000, 0, 0, NULL);
+	ret = asix_write_cmd(dev, AX_CMD_SET_HW_MII, 0x0000, 0, 0, NULL, in_pm);
 	if (ret < 0)
 		netdev_err(dev->net, "Failed to enable hardware MII access\n");
 	return ret;
@@ -247,7 +273,7 @@ int asix_read_phy_addr(struct usbnet *dev, int internal)
 {
 	int offset = (internal ? 1 : 0);
 	u8 buf[2];
-	int ret = asix_read_cmd(dev, AX_CMD_READ_PHY_ID, 0, 0, 2, buf);
+	int ret = asix_read_cmd(dev, AX_CMD_READ_PHY_ID, 0, 0, 2, buf, 0);
 
 	netdev_dbg(dev->net, "asix_get_phy_addr()\n");
 
@@ -270,21 +296,21 @@ int asix_get_phy_addr(struct usbnet *dev)
 }
 
 
-int asix_sw_reset(struct usbnet *dev, u8 flags)
+int asix_sw_reset(struct usbnet *dev, u8 flags, int in_pm)
 {
 	int ret;
 
-        ret = asix_write_cmd(dev, AX_CMD_SW_RESET, flags, 0, 0, NULL);
+	ret = asix_write_cmd(dev, AX_CMD_SW_RESET, flags, 0, 0, NULL, in_pm);
 	if (ret < 0)
 		netdev_err(dev->net, "Failed to send software reset: %02x\n", ret);
 
 	return ret;
 }
 
-u16 asix_read_rx_ctl(struct usbnet *dev)
+u16 asix_read_rx_ctl(struct usbnet *dev, int in_pm)
 {
 	__le16 v;
-	int ret = asix_read_cmd(dev, AX_CMD_READ_RX_CTL, 0, 0, 2, &v);
+	int ret = asix_read_cmd(dev, AX_CMD_READ_RX_CTL, 0, 0, 2, &v, in_pm);
 
 	if (ret < 0) {
 		netdev_err(dev->net, "Error reading RX_CTL register: %02x\n", ret);
@@ -295,12 +321,12 @@ out:
 	return ret;
 }
 
-int asix_write_rx_ctl(struct usbnet *dev, u16 mode)
+int asix_write_rx_ctl(struct usbnet *dev, u16 mode, int in_pm)
 {
 	int ret;
 
 	netdev_dbg(dev->net, "asix_write_rx_ctl() - mode = 0x%04x\n", mode);
-	ret = asix_write_cmd(dev, AX_CMD_WRITE_RX_CTL, mode, 0, 0, NULL);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_RX_CTL, mode, 0, 0, NULL, in_pm);
 	if (ret < 0)
 		netdev_err(dev->net, "Failed to write RX_CTL mode to 0x%04x: %02x\n",
 			   mode, ret);
@@ -308,10 +334,11 @@ int asix_write_rx_ctl(struct usbnet *dev, u16 mode)
 	return ret;
 }
 
-u16 asix_read_medium_status(struct usbnet *dev)
+u16 asix_read_medium_status(struct usbnet *dev, int in_pm)
 {
 	__le16 v;
-	int ret = asix_read_cmd(dev, AX_CMD_READ_MEDIUM_STATUS, 0, 0, 2, &v);
+	int ret = asix_read_cmd(dev, AX_CMD_READ_MEDIUM_STATUS,
+				0, 0, 2, &v, in_pm);
 
 	if (ret < 0) {
 		netdev_err(dev->net, "Error reading Medium Status register: %02x\n",
@@ -323,12 +350,13 @@ u16 asix_read_medium_status(struct usbnet *dev)
 
 }
 
-int asix_write_medium_mode(struct usbnet *dev, u16 mode)
+int asix_write_medium_mode(struct usbnet *dev, u16 mode, int in_pm)
 {
 	int ret;
 
 	netdev_dbg(dev->net, "asix_write_medium_mode() - mode = 0x%04x\n", mode);
-	ret = asix_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE,
+			     mode, 0, 0, NULL, in_pm);
 	if (ret < 0)
 		netdev_err(dev->net, "Failed to write Medium Mode mode to 0x%04x: %02x\n",
 			   mode, ret);
@@ -336,12 +364,12 @@ int asix_write_medium_mode(struct usbnet *dev, u16 mode)
 	return ret;
 }
 
-int asix_write_gpio(struct usbnet *dev, u16 value, int sleep)
+int asix_write_gpio(struct usbnet *dev, u16 value, int sleep, int in_pm)
 {
 	int ret;
 
 	netdev_dbg(dev->net, "asix_write_gpio() - value = 0x%04x\n", value);
-	ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS, value, 0, 0, NULL);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS, value, 0, 0, NULL, in_pm);
 	if (ret < 0)
 		netdev_err(dev->net, "Failed to write GPIO value 0x%04x: %02x\n",
 			   value, ret);
@@ -398,16 +426,23 @@ int asix_mdio_read(struct net_device *netdev, int phy_id, int loc)
 {
 	struct usbnet *dev = netdev_priv(netdev);
 	__le16 res;
+	u8 smsr;
+	int i = 0;
 
 	mutex_lock(&dev->phy_mutex);
-	asix_set_sw_mii(dev);
+	do {
+		asix_set_sw_mii(dev, 0);
+		usleep_range(1000, 1100);
+		asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1, &smsr, 0);
+	} while (!(smsr & AX_HOST_EN) && (i++ < 30));
+
 	asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id,
-				(__u16)loc, 2, &res);
-	asix_set_hw_mii(dev);
+				(__u16)loc, 2, &res, 0);
+	asix_set_hw_mii(dev, 0);
 	mutex_unlock(&dev->phy_mutex);
 
 	netdev_dbg(dev->net, "asix_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n",
-		   phy_id, loc, le16_to_cpu(res));
+			phy_id, loc, le16_to_cpu(res));
 
 	return le16_to_cpu(res);
 }
@@ -416,13 +451,71 @@ void asix_mdio_write(struct net_device *netdev, int phy_id, int loc, int val)
 {
 	struct usbnet *dev = netdev_priv(netdev);
 	__le16 res = cpu_to_le16(val);
+	u8 smsr;
+	int i = 0;
 
 	netdev_dbg(dev->net, "asix_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n",
-		   phy_id, loc, val);
+			phy_id, loc, val);
+
+	mutex_lock(&dev->phy_mutex);
+	do {
+		asix_set_sw_mii(dev, 0);
+		usleep_range(1000, 1100);
+		asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1, &smsr, 0);
+	} while (!(smsr & AX_HOST_EN) && (i++ < 30));
+
+	asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id,
+		       (__u16)loc, 2, &res, 0);
+	asix_set_hw_mii(dev, 0);
+	mutex_unlock(&dev->phy_mutex);
+}
+
+int asix_mdio_read_nopm(struct net_device *netdev, int phy_id, int loc)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	__le16 res;
+	u8 smsr;
+	int i = 0;
+
+	mutex_lock(&dev->phy_mutex);
+	do {
+		asix_set_sw_mii(dev, 1);
+		usleep_range(1000, 1100);
+		asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1, &smsr, 1);
+	} while (!(smsr & AX_HOST_EN) && (i++ < 30));
+
+	asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id,
+		      (__u16)loc, 2, &res, 1);
+	asix_set_hw_mii(dev, 1);
+	mutex_unlock(&dev->phy_mutex);
+
+	netdev_dbg(dev->net, "asix_mdio_read_nopm() phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n",
+			phy_id, loc, le16_to_cpu(res));
+
+	return le16_to_cpu(res);
+}
+
+void
+asix_mdio_write_nopm(struct net_device *netdev, int phy_id, int loc, int val)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	__le16 res = cpu_to_le16(val);
+	u8 smsr;
+	int i = 0;
+
+	netdev_dbg(dev->net, "asix_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n",
+			phy_id, loc, val);
+
 	mutex_lock(&dev->phy_mutex);
-	asix_set_sw_mii(dev);
-	asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id, (__u16)loc, 2, &res);
-	asix_set_hw_mii(dev);
+	do {
+		asix_set_sw_mii(dev, 1);
+		usleep_range(1000, 1100);
+		asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1, &smsr, 1);
+	} while (!(smsr & AX_HOST_EN) && (i++ < 30));
+
+	asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id,
+		       (__u16)loc, 2, &res, 1);
+	asix_set_hw_mii(dev, 1);
 	mutex_unlock(&dev->phy_mutex);
 }
 
@@ -431,7 +524,8 @@ void asix_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
 	struct usbnet *dev = netdev_priv(net);
 	u8 opt;
 
-	if (asix_read_cmd(dev, AX_CMD_READ_MONITOR_MODE, 0, 0, 1, &opt) < 0) {
+	if (asix_read_cmd(dev, AX_CMD_READ_MONITOR_MODE,
+			  0, 0, 1, &opt, 0) < 0) {
 		wolinfo->supported = 0;
 		wolinfo->wolopts = 0;
 		return;
@@ -455,7 +549,7 @@ int asix_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
 		opt |= AX_MONITOR_MAGIC;
 
 	if (asix_write_cmd(dev, AX_CMD_WRITE_MONITOR_MODE,
-			      opt, 0, 0, NULL) < 0)
+			      opt, 0, 0, NULL, 0) < 0)
 		return -EINVAL;
 
 	return 0;
@@ -490,7 +584,7 @@ int asix_get_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
 	/* ax8817x returns 2 bytes from eeprom on read */
 	for (i = first_word; i <= last_word; i++) {
 		if (asix_read_cmd(dev, AX_CMD_READ_EEPROM, i, 0, 2,
-				  &(eeprom_buff[i - first_word])) < 0) {
+				  &eeprom_buff[i - first_word], 0) < 0) {
 			kfree(eeprom_buff);
 			return -EIO;
 		}
@@ -531,7 +625,7 @@ int asix_set_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
 	   the EEPROM */
 	if (eeprom->offset & 1) {
 		ret = asix_read_cmd(dev, AX_CMD_READ_EEPROM, first_word, 0, 2,
-				    &(eeprom_buff[0]));
+				    &eeprom_buff[0], 0);
 		if (ret < 0) {
 			netdev_err(net, "Failed to read EEPROM at offset 0x%02x.\n", first_word);
 			goto free;
@@ -540,7 +634,7 @@ int asix_set_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
 
 	if ((eeprom->offset + eeprom->len) & 1) {
 		ret = asix_read_cmd(dev, AX_CMD_READ_EEPROM, last_word, 0, 2,
-				    &(eeprom_buff[last_word - first_word]));
+				    &eeprom_buff[last_word - first_word], 0);
 		if (ret < 0) {
 			netdev_err(net, "Failed to read EEPROM at offset 0x%02x.\n", last_word);
 			goto free;
@@ -550,7 +644,7 @@ int asix_set_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
 	memcpy((u8 *)eeprom_buff + (eeprom->offset & 1), data, eeprom->len);
 
 	/* write data to EEPROM */
-	ret = asix_write_cmd(dev, AX_CMD_WRITE_ENABLE, 0x0000, 0, 0, NULL);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_ENABLE, 0x0000, 0, 0, NULL, 0);
 	if (ret < 0) {
 		netdev_err(net, "Failed to enable EEPROM write\n");
 		goto free;
@@ -561,7 +655,7 @@ int asix_set_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
 		netdev_dbg(net, "write to EEPROM at offset 0x%02x, data 0x%04x\n",
 			   i, eeprom_buff[i - first_word]);
 		ret = asix_write_cmd(dev, AX_CMD_WRITE_EEPROM, i,
-				     eeprom_buff[i - first_word], 0, NULL);
+				     eeprom_buff[i - first_word], 0, NULL, 0);
 		if (ret < 0) {
 			netdev_err(net, "Failed to write EEPROM at offset 0x%02x.\n",
 				   i);
@@ -570,7 +664,7 @@ int asix_set_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
 		msleep(20);
 	}
 
-	ret = asix_write_cmd(dev, AX_CMD_WRITE_DISABLE, 0x0000, 0, 0, NULL);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_DISABLE, 0x0000, 0, 0, NULL, 0);
 	if (ret < 0) {
 		netdev_err(net, "Failed to disable EEPROM write\n");
 		goto free;
diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
index 5cabefc..aaa4290 100644
--- a/drivers/net/usb/asix_devices.c
+++ b/drivers/net/usb/asix_devices.c
@@ -184,7 +184,7 @@ static int ax88172_link_reset(struct usbnet *dev)
 	netdev_dbg(dev->net, "ax88172_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n",
 		   ethtool_cmd_speed(&ecmd), ecmd.duplex, mode);
 
-	asix_write_medium_mode(dev, mode);
+	asix_write_medium_mode(dev, mode, 0);
 
 	return 0;
 }
@@ -213,18 +213,19 @@ static int ax88172_bind(struct usbnet *dev, struct usb_interface *intf)
 	/* Toggle the GPIOs in a manufacturer/model specific way */
 	for (i = 2; i >= 0; i--) {
 		ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS,
-				(gpio_bits >> (i * 8)) & 0xff, 0, 0, NULL);
+				(gpio_bits >> (i * 8)) & 0xff, 0, 0, NULL, 0);
 		if (ret < 0)
 			goto out;
 		msleep(5);
 	}
 
-	ret = asix_write_rx_ctl(dev, 0x80);
+	ret = asix_write_rx_ctl(dev, 0x80, 0);
 	if (ret < 0)
 		goto out;
 
 	/* Get the MAC address */
-	ret = asix_read_cmd(dev, AX88172_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf);
+	ret = asix_read_cmd(dev, AX88172_CMD_READ_NODE_ID,
+			    0, 0, ETH_ALEN, buf, 0);
 	if (ret < 0) {
 		netdev_dbg(dev->net, "read AX_CMD_READ_NODE_ID failed: %d\n",
 			   ret);
@@ -290,7 +291,7 @@ static int ax88772_link_reset(struct usbnet *dev)
 	netdev_dbg(dev->net, "ax88772_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n",
 		   ethtool_cmd_speed(&ecmd), ecmd.duplex, mode);
 
-	asix_write_medium_mode(dev, mode);
+	asix_write_medium_mode(dev, mode, 0);
 
 	return 0;
 }
@@ -298,78 +299,192 @@ static int ax88772_link_reset(struct usbnet *dev)
 static int ax88772_reset(struct usbnet *dev)
 {
 	struct asix_data *data = (struct asix_data *)&dev->data;
+	int ret;
+
+	/* Rewrite MAC address */
+	ether_addr_copy(data->mac_addr, dev->net->dev_addr);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0,
+			     ETH_ALEN, data->mac_addr, 0);
+	if (ret < 0)
+		goto out;
+
+	/* Set RX_CTL to default values with 2k buffer, and enable cactus */
+	ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, 0);
+	if (ret < 0)
+		goto out;
+
+	asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT, 0);
+	if (ret < 0)
+		goto out;
+
+	return 0;
+
+out:
+	return ret;
+}
+
+static int ax88772_hw_reset(struct usbnet *dev, int in_pm)
+{
+	struct asix_data *data = (struct asix_data *)&dev->data;
 	int ret, embd_phy;
 	u16 rx_ctl;
 
-	ret = asix_write_gpio(dev,
-			AX_GPIO_RSE | AX_GPIO_GPO_2 | AX_GPIO_GPO2EN, 5);
+	ret = asix_write_gpio(dev, AX_GPIO_RSE | AX_GPIO_GPO_2 |
+			      AX_GPIO_GPO2EN, 5, in_pm);
 	if (ret < 0)
 		goto out;
 
-	embd_phy = ((asix_get_phy_addr(dev) & 0x1f) == 0x10 ? 1 : 0);
+	embd_phy = ((dev->mii.phy_id & 0x1f) == 0x10 ? 1 : 0);
 
-	ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, embd_phy, 0, 0, NULL);
+	ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, embd_phy,
+			     0, 0, NULL, in_pm);
 	if (ret < 0) {
 		netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret);
 		goto out;
 	}
 
-	ret = asix_sw_reset(dev, AX_SWRESET_IPPD | AX_SWRESET_PRL);
-	if (ret < 0)
-		goto out;
+	if (embd_phy) {
+		ret = asix_sw_reset(dev, AX_SWRESET_IPPD, in_pm);
+		if (ret < 0)
+			goto out;
 
-	msleep(150);
+		usleep_range(10000, 11000);
 
-	ret = asix_sw_reset(dev, AX_SWRESET_CLEAR);
-	if (ret < 0)
-		goto out;
+		ret = asix_sw_reset(dev, AX_SWRESET_CLEAR, in_pm);
+		if (ret < 0)
+			goto out;
 
-	msleep(150);
+		msleep(60);
 
-	if (embd_phy) {
-		ret = asix_sw_reset(dev, AX_SWRESET_IPRL);
+		ret = asix_sw_reset(dev, AX_SWRESET_IPRL | AX_SWRESET_PRL,
+				    in_pm);
 		if (ret < 0)
 			goto out;
 	} else {
-		ret = asix_sw_reset(dev, AX_SWRESET_PRTE);
+		ret = asix_sw_reset(dev, AX_SWRESET_IPPD | AX_SWRESET_PRL,
+				    in_pm);
 		if (ret < 0)
 			goto out;
 	}
 
 	msleep(150);
-	rx_ctl = asix_read_rx_ctl(dev);
-	netdev_dbg(dev->net, "RX_CTL is 0x%04x after software reset\n", rx_ctl);
-	ret = asix_write_rx_ctl(dev, 0x0000);
+
+	if (in_pm && (!asix_mdio_read_nopm(dev->net, dev->mii.phy_id,
+					   MII_PHYSID1))){
+		ret = -EIO;
+		goto out;
+	}
+
+	ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, in_pm);
+	if (ret < 0)
+		goto out;
+
+	ret = asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT, in_pm);
 	if (ret < 0)
 		goto out;
 
-	rx_ctl = asix_read_rx_ctl(dev);
-	netdev_dbg(dev->net, "RX_CTL is 0x%04x setting to 0x0000\n", rx_ctl);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0,
+			     AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT,
+			     AX88772_IPG2_DEFAULT, 0, NULL, in_pm);
+	if (ret < 0) {
+		netdev_dbg(dev->net, "Write IPG,IPG1,IPG2 failed: %d\n", ret);
+		goto out;
+	}
 
-	ret = asix_sw_reset(dev, AX_SWRESET_PRL);
+	/* Rewrite MAC address */
+	ether_addr_copy(data->mac_addr, dev->net->dev_addr);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0,
+			     ETH_ALEN, data->mac_addr, in_pm);
 	if (ret < 0)
 		goto out;
 
-	msleep(150);
+	/* Set RX_CTL to default values with 2k buffer, and enable cactus */
+	ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, in_pm);
+	if (ret < 0)
+		goto out;
+
+	rx_ctl = asix_read_rx_ctl(dev, in_pm);
+	netdev_dbg(dev->net, "RX_CTL is 0x%04x after all initializations\n",
+		   rx_ctl);
+
+	rx_ctl = asix_read_medium_status(dev, in_pm);
+	netdev_dbg(dev->net,
+		   "Medium Status is 0x%04x after all initializations\n",
+		   rx_ctl);
+
+	return 0;
+
+out:
+	return ret;
+}
+
+static int ax88772a_hw_reset(struct usbnet *dev, int in_pm)
+{
+	struct asix_data *data = (struct asix_data *)&dev->data;
+	int ret, embd_phy;
+	u16 rx_ctl;
+	u8 chipcode = 0;
 
-	ret = asix_sw_reset(dev, AX_SWRESET_IPRL | AX_SWRESET_PRL);
+	ret = asix_write_gpio(dev, AX_GPIO_RSE, 5, in_pm);
 	if (ret < 0)
 		goto out;
 
-	msleep(150);
+	embd_phy = ((dev->mii.phy_id & 0x1f) == 0x10 ? 1 : 0);
 
-	asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
-	asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
-			ADVERTISE_ALL | ADVERTISE_CSMA);
-	mii_nway_restart(&dev->mii);
+	ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, embd_phy |
+			     AX_PHYSEL_SSEN, 0, 0, NULL, in_pm);
+	if (ret < 0) {
+		netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret);
+		goto out;
+	}
+	usleep_range(10000, 11000);
 
-	ret = asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT);
+	ret = asix_sw_reset(dev, AX_SWRESET_IPPD | AX_SWRESET_IPRL, in_pm);
 	if (ret < 0)
 		goto out;
 
+	usleep_range(10000, 11000);
+
+	ret = asix_sw_reset(dev, AX_SWRESET_IPRL, in_pm);
+	if (ret < 0)
+		goto out;
+
+	msleep(160);
+
+	ret = asix_sw_reset(dev, AX_SWRESET_CLEAR, in_pm);
+	if (ret < 0)
+		goto out;
+
+	ret = asix_sw_reset(dev, AX_SWRESET_IPRL, in_pm);
+	if (ret < 0)
+		goto out;
+
+	msleep(200);
+
+	if (in_pm && (!asix_mdio_read_nopm(dev->net, dev->mii.phy_id,
+					   MII_PHYSID1))) {
+		ret = -1;
+		goto out;
+	}
+
+	ret = asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0,
+			    0, 1, &chipcode, in_pm);
+	if (ret < 0)
+		goto out;
+
+	if ((chipcode & AX_CHIPCODE_MASK) == AX_AX88772B_CHIPCODE) {
+		ret = asix_write_cmd(dev, AX_QCTCTRL, 0x8000, 0x8001,
+				     0, NULL, in_pm);
+		if (ret < 0) {
+			netdev_dbg(dev->net, "Write BQ setting failed: %d\n",
+				   ret);
+			goto out;
+		}
+	}
+
 	ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0,
 				AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT,
-				AX88772_IPG2_DEFAULT, 0, NULL);
+				AX88772_IPG2_DEFAULT, 0, NULL, in_pm);
 	if (ret < 0) {
 		netdev_dbg(dev->net, "Write IPG,IPG1,IPG2 failed: %d\n", ret);
 		goto out;
@@ -378,20 +493,29 @@ static int ax88772_reset(struct usbnet *dev)
 	/* Rewrite MAC address */
 	memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN);
 	ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
-							data->mac_addr);
+							data->mac_addr, in_pm);
+	if (ret < 0)
+		goto out;
+
+	/* Set RX_CTL to default values with 2k buffer, and enable cactus */
+	ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, in_pm);
 	if (ret < 0)
 		goto out;
 
+	ret = asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT, in_pm);
+	if (ret < 0)
+		return ret;
+
 	/* Set RX_CTL to default values with 2k buffer, and enable cactus */
-	ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL);
+	ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, in_pm);
 	if (ret < 0)
 		goto out;
 
-	rx_ctl = asix_read_rx_ctl(dev);
+	rx_ctl = asix_read_rx_ctl(dev, in_pm);
 	netdev_dbg(dev->net, "RX_CTL is 0x%04x after all initializations\n",
 		   rx_ctl);
 
-	rx_ctl = asix_read_medium_status(dev);
+	rx_ctl = asix_read_medium_status(dev, in_pm);
 	netdev_dbg(dev->net,
 		   "Medium Status is 0x%04x after all initializations\n",
 		   rx_ctl);
@@ -400,7 +524,6 @@ static int ax88772_reset(struct usbnet *dev)
 
 out:
 	return ret;
-
 }
 
 static const struct net_device_ops ax88772_netdev_ops = {
@@ -415,11 +538,87 @@ static const struct net_device_ops ax88772_netdev_ops = {
 	.ndo_set_rx_mode        = asix_set_multicast,
 };
 
+static void ax88772_suspend(struct usbnet *dev)
+{
+	struct asix_common_private *priv = dev->driver_priv;
+
+	/* Preserve BMCR for restoring */
+	priv->presvd_phy_bmcr =
+		asix_mdio_read_nopm(dev->net, dev->mii.phy_id, MII_BMCR);
+
+	/* Preserve ANAR for restoring */
+	priv->presvd_phy_advertise =
+		asix_mdio_read_nopm(dev->net, dev->mii.phy_id, MII_ADVERTISE);
+}
+
+static int asix_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	struct usbnet *dev = usb_get_intfdata(intf);
+	struct asix_common_private *priv = dev->driver_priv;
+
+	if (priv->suspend)
+		priv->suspend(dev);
+
+	return usbnet_suspend(intf, message);
+}
+
+static void ax88772_restore_phy(struct usbnet *dev)
+{
+	struct asix_common_private *priv = dev->driver_priv;
+
+	if (priv->presvd_phy_advertise) {
+		/* Restore Advertisement control reg */
+		asix_mdio_write_nopm(dev->net, dev->mii.phy_id, MII_ADVERTISE,
+				     priv->presvd_phy_advertise);
+
+		/* Restore BMCR */
+		asix_mdio_write_nopm(dev->net, dev->mii.phy_id, MII_BMCR,
+				     priv->presvd_phy_bmcr);
+
+		priv->presvd_phy_advertise = 0;
+		priv->presvd_phy_bmcr = 0;
+	}
+}
+
+static void ax88772_resume(struct usbnet *dev)
+{
+	int i;
+
+	for (i = 0; i < 3; i++)
+		if (!ax88772_hw_reset(dev, 1))
+			break;
+	ax88772_restore_phy(dev);
+}
+
+static void ax88772a_resume(struct usbnet *dev)
+{
+	int i;
+
+	for (i = 0; i < 3; i++) {
+		if (!ax88772a_hw_reset(dev, 1))
+			break;
+	}
+
+	ax88772_restore_phy(dev);
+}
+
+static int asix_resume(struct usb_interface *intf)
+{
+	struct usbnet *dev = usb_get_intfdata(intf);
+	struct asix_common_private *priv = dev->driver_priv;
+
+	if (priv->resume)
+		priv->resume(dev);
+
+	return usbnet_resume(intf);
+}
+
 static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
 {
-	int ret, embd_phy, i;
-	u8 buf[ETH_ALEN];
+	int ret, i;
+	u8 buf[ETH_ALEN], chipcode = 0;
 	u32 phyid;
+	struct asix_common_private *priv;
 
 	usbnet_get_endpoints(dev,intf);
 
@@ -427,13 +626,13 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
 	if (dev->driver_info->data & FLAG_EEPROM_MAC) {
 		for (i = 0; i < (ETH_ALEN >> 1); i++) {
 			ret = asix_read_cmd(dev, AX_CMD_READ_EEPROM, 0x04 + i,
-					0, 2, buf + i * 2);
+					    0, 2, buf + i * 2, 0);
 			if (ret < 0)
 				break;
 		}
 	} else {
 		ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID,
-				0, 0, ETH_ALEN, buf);
+				0, 0, ETH_ALEN, buf, 0);
 	}
 
 	if (ret < 0) {
@@ -456,16 +655,11 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
 	dev->net->needed_headroom = 4; /* cf asix_tx_fixup() */
 	dev->net->needed_tailroom = 4; /* cf asix_tx_fixup() */
 
-	embd_phy = ((dev->mii.phy_id & 0x1f) == 0x10 ? 1 : 0);
+	asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1, &chipcode, 0);
+	chipcode &= AX_CHIPCODE_MASK;
 
-	/* Reset the PHY to normal operation mode */
-	ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, embd_phy, 0, 0, NULL);
-	if (ret < 0) {
-		netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret);
-		return ret;
-	}
-
-	ax88772_reset(dev);
+	(chipcode == AX_AX88772_CHIPCODE) ? ax88772_hw_reset(dev, 0) :
+					    ax88772a_hw_reset(dev, 0);
 
 	/* Read PHYID register *AFTER* the PHY was reset properly */
 	phyid = asix_get_phyid(dev);
@@ -482,6 +676,18 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
 	if (!dev->driver_priv)
 		return -ENOMEM;
 
+	priv = dev->driver_priv;
+
+	priv->presvd_phy_bmcr = 0;
+	priv->presvd_phy_advertise = 0;
+	if (chipcode == AX_AX88772_CHIPCODE) {
+		priv->resume = ax88772_resume;
+		priv->suspend = ax88772_suspend;
+	} else {
+		priv->resume = ax88772a_resume;
+		priv->suspend = ax88772_suspend;
+	}
+
 	return 0;
 }
 
@@ -593,12 +799,12 @@ static int ax88178_reset(struct usbnet *dev)
 	int gpio0 = 0;
 	u32 phyid;
 
-	asix_read_cmd(dev, AX_CMD_READ_GPIOS, 0, 0, 1, &status);
+	asix_read_cmd(dev, AX_CMD_READ_GPIOS, 0, 0, 1, &status, 0);
 	netdev_dbg(dev->net, "GPIO Status: 0x%04x\n", status);
 
-	asix_write_cmd(dev, AX_CMD_WRITE_ENABLE, 0, 0, 0, NULL);
-	asix_read_cmd(dev, AX_CMD_READ_EEPROM, 0x0017, 0, 2, &eeprom);
-	asix_write_cmd(dev, AX_CMD_WRITE_DISABLE, 0, 0, 0, NULL);
+	asix_write_cmd(dev, AX_CMD_WRITE_ENABLE, 0, 0, 0, NULL, 0);
+	asix_read_cmd(dev, AX_CMD_READ_EEPROM, 0x0017, 0, 2, &eeprom, 0);
+	asix_write_cmd(dev, AX_CMD_WRITE_DISABLE, 0, 0, 0, NULL, 0);
 
 	netdev_dbg(dev->net, "EEPROM index 0x17 is 0x%04x\n", eeprom);
 
@@ -614,15 +820,16 @@ static int ax88178_reset(struct usbnet *dev)
 	netdev_dbg(dev->net, "GPIO0: %d, PhyMode: %d\n", gpio0, data->phymode);
 
 	/* Power up external GigaPHY through AX88178 GPIO pin */
-	asix_write_gpio(dev, AX_GPIO_RSE | AX_GPIO_GPO_1 | AX_GPIO_GPO1EN, 40);
+	asix_write_gpio(dev, AX_GPIO_RSE | AX_GPIO_GPO_1 |
+			AX_GPIO_GPO1EN, 40, 0);
 	if ((le16_to_cpu(eeprom) >> 8) != 1) {
-		asix_write_gpio(dev, 0x003c, 30);
-		asix_write_gpio(dev, 0x001c, 300);
-		asix_write_gpio(dev, 0x003c, 30);
+		asix_write_gpio(dev, 0x003c, 30, 0);
+		asix_write_gpio(dev, 0x001c, 300, 0);
+		asix_write_gpio(dev, 0x003c, 30, 0);
 	} else {
 		netdev_dbg(dev->net, "gpio phymode == 1 path\n");
-		asix_write_gpio(dev, AX_GPIO_GPO1EN, 30);
-		asix_write_gpio(dev, AX_GPIO_GPO1EN | AX_GPIO_GPO_1, 30);
+		asix_write_gpio(dev, AX_GPIO_GPO1EN, 30, 0);
+		asix_write_gpio(dev, AX_GPIO_GPO1EN | AX_GPIO_GPO_1, 30, 0);
 	}
 
 	/* Read PHYID register *AFTER* powering up PHY */
@@ -630,15 +837,15 @@ static int ax88178_reset(struct usbnet *dev)
 	netdev_dbg(dev->net, "PHYID=0x%08x\n", phyid);
 
 	/* Set AX88178 to enable MII/GMII/RGMII interface for external PHY */
-	asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, 0, 0, 0, NULL);
+	asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, 0, 0, 0, NULL, 0);
 
-	asix_sw_reset(dev, 0);
+	asix_sw_reset(dev, 0, 0);
 	msleep(150);
 
-	asix_sw_reset(dev, AX_SWRESET_PRL | AX_SWRESET_IPPD);
+	asix_sw_reset(dev, AX_SWRESET_PRL | AX_SWRESET_IPPD, 0);
 	msleep(150);
 
-	asix_write_rx_ctl(dev, 0);
+	asix_write_rx_ctl(dev, 0, 0);
 
 	if (data->phymode == PHY_MODE_MARVELL) {
 		marvell_phy_init(dev);
@@ -655,18 +862,18 @@ static int ax88178_reset(struct usbnet *dev)
 
 	mii_nway_restart(&dev->mii);
 
-	ret = asix_write_medium_mode(dev, AX88178_MEDIUM_DEFAULT);
+	ret = asix_write_medium_mode(dev, AX88178_MEDIUM_DEFAULT, 0);
 	if (ret < 0)
 		return ret;
 
 	/* Rewrite MAC address */
 	memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN);
 	ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
-							data->mac_addr);
+							data->mac_addr, 0);
 	if (ret < 0)
 		return ret;
 
-	ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL);
+	ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, 0);
 	if (ret < 0)
 		return ret;
 
@@ -704,7 +911,7 @@ static int ax88178_link_reset(struct usbnet *dev)
 	netdev_dbg(dev->net, "ax88178_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n",
 		   speed, ecmd.duplex, mode);
 
-	asix_write_medium_mode(dev, mode);
+	asix_write_medium_mode(dev, mode, 0);
 
 	if (data->phymode == PHY_MODE_MARVELL && data->ledmode)
 		marvell_led_status(dev, speed);
@@ -733,15 +940,15 @@ static void ax88178_set_mfb(struct usbnet *dev)
 		mfb = AX_RX_CTL_MFB_16384;
 	}
 
-	rxctl = asix_read_rx_ctl(dev);
-	asix_write_rx_ctl(dev, (rxctl & ~AX_RX_CTL_MFB_16384) | mfb);
+	rxctl = asix_read_rx_ctl(dev, 0);
+	asix_write_rx_ctl(dev, (rxctl & ~AX_RX_CTL_MFB_16384) | mfb, 0);
 
-	medium = asix_read_medium_status(dev);
+	medium = asix_read_medium_status(dev, 0);
 	if (dev->net->mtu > 1500)
 		medium |= AX_MEDIUM_JFE;
 	else
 		medium &= ~AX_MEDIUM_JFE;
-	asix_write_medium_mode(dev, medium);
+	asix_write_medium_mode(dev, medium, 0);
 
 	if (dev->rx_urb_size > old_rx_urb_size)
 		usbnet_unlink_rx_urbs(dev);
@@ -790,7 +997,7 @@ static int ax88178_bind(struct usbnet *dev, struct usb_interface *intf)
 	usbnet_get_endpoints(dev,intf);
 
 	/* Get the MAC address */
-	ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf);
+	ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf, 0);
 	if (ret < 0) {
 		netdev_dbg(dev->net, "Failed to read MAC address: %d\n", ret);
 		return ret;
@@ -811,10 +1018,10 @@ static int ax88178_bind(struct usbnet *dev, struct usb_interface *intf)
 	dev->net->ethtool_ops = &ax88178_ethtool_ops;
 
 	/* Blink LEDS so users know driver saw dongle */
-	asix_sw_reset(dev, 0);
+	asix_sw_reset(dev, 0, 0);
 	msleep(150);
 
-	asix_sw_reset(dev, AX_SWRESET_PRL | AX_SWRESET_IPPD);
+	asix_sw_reset(dev, AX_SWRESET_PRL | AX_SWRESET_IPPD, 0);
 	msleep(150);
 
 	/* Asix framing packs multiple eth frames into a 2K usb bulk transfer */
@@ -877,7 +1084,7 @@ static const struct driver_info ax88772_info = {
 	.unbind = ax88772_unbind,
 	.status = asix_status,
 	.link_reset = ax88772_link_reset,
-	.reset = ax88772_link_reset,
+	.reset = ax88772_reset,
 	.flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR | FLAG_MULTI_PACKET,
 	.rx_fixup = asix_rx_fixup_common,
 	.tx_fixup = asix_tx_fixup,
@@ -1005,7 +1212,7 @@ static const struct usb_device_id	products [] = {
 }, {
 	// Lenovo U2L100P 10/100
 	USB_DEVICE (0x17ef, 0x7203),
-	.driver_info = (unsigned long) &ax88772_info,
+	.driver_info = (unsigned long)&ax88772b_info,
 }, {
 	// ASIX AX88772B 10/100
 	USB_DEVICE (0x0b95, 0x772b),
@@ -1073,7 +1280,7 @@ static const struct usb_device_id	products [] = {
 }, {
 	// Asus USB Ethernet Adapter
 	USB_DEVICE (0x0b95, 0x7e2b),
-	.driver_info = (unsigned long) &ax88772_info,
+	.driver_info = (unsigned long)&ax88772b_info,
 }, {
 	/* ASIX 88172a demo board */
 	USB_DEVICE(0x0b95, 0x172a),
@@ -1095,8 +1302,8 @@ static struct usb_driver asix_driver = {
 	.name =		DRIVER_NAME,
 	.id_table =	products,
 	.probe =	usbnet_probe,
-	.suspend =	usbnet_suspend,
-	.resume =	usbnet_resume,
+	.suspend =	asix_suspend,
+	.resume =	asix_resume,
 	.disconnect =	usbnet_disconnect,
 	.supports_autosuspend = 1,
 	.disable_hub_initiated_lpm = 1,
diff --git a/drivers/net/usb/ax88172a.c b/drivers/net/usb/ax88172a.c
index 163a2c5..49a3bc1 100644
--- a/drivers/net/usb/ax88172a.c
+++ b/drivers/net/usb/ax88172a.c
@@ -81,7 +81,7 @@ static void ax88172a_adjust_link(struct net_device *netdev)
 	}
 
 	if (mode != priv->oldmode) {
-		asix_write_medium_mode(dev, mode);
+		asix_write_medium_mode(dev, mode, 0);
 		priv->oldmode = mode;
 		netdev_dbg(netdev, "speed %u duplex %d, setting mode to 0x%04x\n",
 			   phydev->speed, phydev->duplex, mode);
@@ -176,18 +176,19 @@ static int ax88172a_reset_phy(struct usbnet *dev, int embd_phy)
 {
 	int ret;
 
-	ret = asix_sw_reset(dev, AX_SWRESET_IPPD);
+	ret = asix_sw_reset(dev, AX_SWRESET_IPPD, 0);
 	if (ret < 0)
 		goto err;
 
 	msleep(150);
-	ret = asix_sw_reset(dev, AX_SWRESET_CLEAR);
+	ret = asix_sw_reset(dev, AX_SWRESET_CLEAR, 0);
 	if (ret < 0)
 		goto err;
 
 	msleep(150);
 
-	ret = asix_sw_reset(dev, embd_phy ? AX_SWRESET_IPRL : AX_SWRESET_IPPD);
+	ret = asix_sw_reset(dev, embd_phy ? AX_SWRESET_IPRL : AX_SWRESET_IPPD,
+			    0);
 	if (ret < 0)
 		goto err;
 
@@ -213,7 +214,7 @@ static int ax88172a_bind(struct usbnet *dev, struct usb_interface *intf)
 	dev->driver_priv = priv;
 
 	/* Get the MAC address */
-	ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf);
+	ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf, 0);
 	if (ret < 0) {
 		netdev_err(dev->net, "Failed to read MAC address: %d\n", ret);
 		goto free;
@@ -224,7 +225,7 @@ static int ax88172a_bind(struct usbnet *dev, struct usb_interface *intf)
 	dev->net->ethtool_ops = &ax88172a_ethtool_ops;
 
 	/* are we using the internal or the external phy? */
-	ret = asix_read_cmd(dev, AX_CMD_SW_PHY_STATUS, 0, 0, 1, buf);
+	ret = asix_read_cmd(dev, AX_CMD_SW_PHY_STATUS, 0, 0, 1, buf, 0);
 	if (ret < 0) {
 		netdev_err(dev->net, "Failed to read software interface selection register: %d\n",
 			   ret);
@@ -303,20 +304,20 @@ static int ax88172a_reset(struct usbnet *dev)
 	ax88172a_reset_phy(dev, priv->use_embdphy);
 
 	msleep(150);
-	rx_ctl = asix_read_rx_ctl(dev);
+	rx_ctl = asix_read_rx_ctl(dev, 0);
 	netdev_dbg(dev->net, "RX_CTL is 0x%04x after software reset\n", rx_ctl);
-	ret = asix_write_rx_ctl(dev, 0x0000);
+	ret = asix_write_rx_ctl(dev, 0x0000, 0);
 	if (ret < 0)
 		goto out;
 
-	rx_ctl = asix_read_rx_ctl(dev);
+	rx_ctl = asix_read_rx_ctl(dev, 0);
 	netdev_dbg(dev->net, "RX_CTL is 0x%04x setting to 0x0000\n", rx_ctl);
 
 	msleep(150);
 
 	ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0,
 			     AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT,
-			     AX88772_IPG2_DEFAULT, 0, NULL);
+			     AX88772_IPG2_DEFAULT, 0, NULL, 0);
 	if (ret < 0) {
 		netdev_err(dev->net, "Write IPG,IPG1,IPG2 failed: %d\n", ret);
 		goto out;
@@ -325,20 +326,20 @@ static int ax88172a_reset(struct usbnet *dev)
 	/* Rewrite MAC address */
 	memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN);
 	ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
-			     data->mac_addr);
+			     data->mac_addr, 0);
 	if (ret < 0)
 		goto out;
 
 	/* Set RX_CTL to default values with 2k buffer, and enable cactus */
-	ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL);
+	ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, 0);
 	if (ret < 0)
 		goto out;
 
-	rx_ctl = asix_read_rx_ctl(dev);
+	rx_ctl = asix_read_rx_ctl(dev, 0);
 	netdev_dbg(dev->net, "RX_CTL is 0x%04x after all initializations\n",
 		   rx_ctl);
 
-	rx_ctl = asix_read_medium_status(dev);
+	rx_ctl = asix_read_medium_status(dev, 0);
 	netdev_dbg(dev->net, "Medium Status is 0x%04x after all initializations\n",
 		   rx_ctl);
 
-- 
2.7.4

[PATCH v3 2/5] net: asix: Avoid looping when the device is disconnected

[robert.foss]

From: Vincent Palatin <vpalatin@chromium.org>

Check the answers from the USB stack and avoid re-sending multiple times
the request if the device has disappeared.

Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Signed-off-by: Robert Foss <robert.foss@collabora.com>
Tested-by: Robert Foss <robert.foss@collabora.com>
---
 drivers/net/usb/asix_common.c  | 56 +++++++++++++++++++++++++++++++++---------
 drivers/net/usb/asix_devices.c |  2 ++
 2 files changed, 46 insertions(+), 12 deletions(-)

diff --git a/drivers/net/usb/asix_common.c b/drivers/net/usb/asix_common.c
index 25609ee..f79eb12 100644
--- a/drivers/net/usb/asix_common.c
+++ b/drivers/net/usb/asix_common.c
@@ -428,13 +428,21 @@ int asix_mdio_read(struct net_device *netdev, int phy_id, int loc)
 	__le16 res;
 	u8 smsr;
 	int i = 0;
+	int ret;
 
 	mutex_lock(&dev->phy_mutex);
 	do {
-		asix_set_sw_mii(dev, 0);
+		ret = asix_set_sw_mii(dev, 0);
+		if (ret == -ENODEV)
+			break;
 		usleep_range(1000, 1100);
-		asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1, &smsr, 0);
-	} while (!(smsr & AX_HOST_EN) && (i++ < 30));
+		ret = asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG,
+				    0, 0, 1, &smsr, 0);
+	} while (!(smsr & AX_HOST_EN) && (i++ < 30) && (ret != -ENODEV));
+	if (ret == -ENODEV) {
+		mutex_unlock(&dev->phy_mutex);
+		return ret;
+	}
 
 	asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id,
 				(__u16)loc, 2, &res, 0);
@@ -453,16 +461,24 @@ void asix_mdio_write(struct net_device *netdev, int phy_id, int loc, int val)
 	__le16 res = cpu_to_le16(val);
 	u8 smsr;
 	int i = 0;
+	int ret;
 
 	netdev_dbg(dev->net, "asix_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n",
 			phy_id, loc, val);
 
 	mutex_lock(&dev->phy_mutex);
 	do {
-		asix_set_sw_mii(dev, 0);
+		ret = asix_set_sw_mii(dev, 0);
+		if (ret == -ENODEV)
+			break;
 		usleep_range(1000, 1100);
-		asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1, &smsr, 0);
-	} while (!(smsr & AX_HOST_EN) && (i++ < 30));
+		ret = asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG,
+				    0, 0, 1, &smsr, 0);
+	} while (!(smsr & AX_HOST_EN) && (i++ < 30) && (ret != -ENODEV));
+	if (ret == -ENODEV) {
+		mutex_unlock(&dev->phy_mutex);
+		return;
+	}
 
 	asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id,
 		       (__u16)loc, 2, &res, 0);
@@ -476,13 +492,21 @@ int asix_mdio_read_nopm(struct net_device *netdev, int phy_id, int loc)
 	__le16 res;
 	u8 smsr;
 	int i = 0;
+	int ret;
 
 	mutex_lock(&dev->phy_mutex);
 	do {
-		asix_set_sw_mii(dev, 1);
+		ret = asix_set_sw_mii(dev, 1);
+		if (ret == -ENODEV)
+			break;
 		usleep_range(1000, 1100);
-		asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1, &smsr, 1);
-	} while (!(smsr & AX_HOST_EN) && (i++ < 30));
+		ret = asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG,
+				    0, 0, 1, &smsr, 1);
+	} while (!(smsr & AX_HOST_EN) && (i++ < 30) && (ret != -ENODEV));
+	if (ret == -ENODEV) {
+		mutex_unlock(&dev->phy_mutex);
+		return ret;
+	}
 
 	asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id,
 		      (__u16)loc, 2, &res, 1);
@@ -502,16 +526,24 @@ asix_mdio_write_nopm(struct net_device *netdev, int phy_id, int loc, int val)
 	__le16 res = cpu_to_le16(val);
 	u8 smsr;
 	int i = 0;
+	int ret;
 
 	netdev_dbg(dev->net, "asix_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n",
 			phy_id, loc, val);
 
 	mutex_lock(&dev->phy_mutex);
 	do {
-		asix_set_sw_mii(dev, 1);
+		ret = asix_set_sw_mii(dev, 1);
+		if (ret == -ENODEV)
+			break;
 		usleep_range(1000, 1100);
-		asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1, &smsr, 1);
-	} while (!(smsr & AX_HOST_EN) && (i++ < 30));
+		ret = asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG,
+				    0, 0, 1, &smsr, 1);
+	} while (!(smsr & AX_HOST_EN) && (i++ < 30) && (ret != -ENODEV));
+	if (ret == -ENODEV) {
+		mutex_unlock(&dev->phy_mutex);
+		return;
+	}
 
 	asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id,
 		       (__u16)loc, 2, &res, 1);
diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
index aaa4290..ebeb730 100644
--- a/drivers/net/usb/asix_devices.c
+++ b/drivers/net/usb/asix_devices.c
@@ -79,6 +79,8 @@ static u32 asix_get_phyid(struct usbnet *dev)
 	/* Poll for the rare case the FW or phy isn't ready yet.  */
 	for (i = 0; i < 100; i++) {
 		phy_reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID1);
+		if (phy_reg < 0)
+			return 0;
 		if (phy_reg != 0 && phy_reg != 0xFFFF)
 			break;
 		mdelay(1);
-- 
2.7.4

[PATCH v3 3/5] net: asix: Fix AX88772x resume failures

[robert.foss]

From: Allan Chou <allan@asix.com.tw>

The change fixes AX88772x resume failure by
- Restore incorrect AX88772A PHY registers when resetting
- Need to stop MAC operation when suspending
- Need to restart MII when restoring PHY

Signed-off-by: Allan Chou <allan@asix.com.tw>
Signed-off-by: Robert Foss <robert.foss@collabora.com>
Tested-by: Robert Foss <robert.foss@collabora.com>
---
 drivers/net/usb/asix_devices.c | 47 +++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 46 insertions(+), 1 deletion(-)

diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
index ebeb730..083dc2e 100644
--- a/drivers/net/usb/asix_devices.c
+++ b/drivers/net/usb/asix_devices.c
@@ -35,6 +35,15 @@
 
 #define	PHY_MODE_RTL8211CL	0x000C
 
+#define AX88772A_PHY14H		0x14
+#define AX88772A_PHY14H_DEFAULT 0x442C
+
+#define AX88772A_PHY15H		0x15
+#define AX88772A_PHY15H_DEFAULT 0x03C8
+
+#define AX88772A_PHY16H		0x16
+#define AX88772A_PHY16H_DEFAULT 0x4044
+
 struct ax88172_int_data {
 	__le16 res1;
 	u8 link;
@@ -424,7 +433,7 @@ static int ax88772a_hw_reset(struct usbnet *dev, int in_pm)
 {
 	struct asix_data *data = (struct asix_data *)&dev->data;
 	int ret, embd_phy;
-	u16 rx_ctl;
+	u16 rx_ctl, phy14h, phy15h, phy16h;
 	u8 chipcode = 0;
 
 	ret = asix_write_gpio(dev, AX_GPIO_RSE, 5, in_pm);
@@ -482,6 +491,32 @@ static int ax88772a_hw_reset(struct usbnet *dev, int in_pm)
 				   ret);
 			goto out;
 		}
+	} else if ((chipcode & AX_CHIPCODE_MASK) == AX_AX88772A_CHIPCODE) {
+		/* Check if the PHY registers have default settings */
+		phy14h = asix_mdio_read_nopm(dev->net, dev->mii.phy_id,
+					     AX88772A_PHY14H);
+		phy15h = asix_mdio_read_nopm(dev->net, dev->mii.phy_id,
+					     AX88772A_PHY15H);
+		phy16h = asix_mdio_read_nopm(dev->net, dev->mii.phy_id,
+					     AX88772A_PHY16H);
+
+		netdev_dbg(dev->net,
+			   "772a_hw_reset: MR20=0x%x MR21=0x%x MR22=0x%x\n",
+			   phy14h, phy15h, phy16h);
+
+		/* Restore PHY registers default setting if not */
+		if (phy14h != AX88772A_PHY14H_DEFAULT)
+			asix_mdio_write_nopm(dev->net, dev->mii.phy_id,
+					     AX88772A_PHY14H,
+					     AX88772A_PHY14H_DEFAULT);
+		if (phy15h != AX88772A_PHY15H_DEFAULT)
+			asix_mdio_write_nopm(dev->net, dev->mii.phy_id,
+					     AX88772A_PHY15H,
+					     AX88772A_PHY15H_DEFAULT);
+		if (phy16h != AX88772A_PHY16H_DEFAULT)
+			asix_mdio_write_nopm(dev->net, dev->mii.phy_id,
+					     AX88772A_PHY16H,
+					     AX88772A_PHY16H_DEFAULT);
 	}
 
 	ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0,
@@ -543,6 +578,15 @@ static const struct net_device_ops ax88772_netdev_ops = {
 static void ax88772_suspend(struct usbnet *dev)
 {
 	struct asix_common_private *priv = dev->driver_priv;
+	u16 medium;
+
+	/* Stop MAC operation */
+	medium = asix_read_medium_status(dev, 0);
+	medium &= ~AX_MEDIUM_RE;
+	asix_write_medium_mode(dev, medium, 0);
+
+	netdev_dbg(dev->net, "ax88772_suspend: medium=0x%04x\n",
+		   asix_read_medium_status(dev, 0));
 
 	/* Preserve BMCR for restoring */
 	priv->presvd_phy_bmcr =
@@ -577,6 +621,7 @@ static void ax88772_restore_phy(struct usbnet *dev)
 		asix_mdio_write_nopm(dev->net, dev->mii.phy_id, MII_BMCR,
 				     priv->presvd_phy_bmcr);
 
+		mii_nway_restart(&dev->mii);
 		priv->presvd_phy_advertise = 0;
 		priv->presvd_phy_bmcr = 0;
 	}
-- 
2.7.4

[PATCH v3 4/5] net: asix: see 802.3 spec for phy reset

[robert.foss]

From: Grant Grundler <grundler@chromium.org>

        https://lkml.org/lkml/2014/11/11/947

Ben Hutchings is correct. IEEE 802.3 spec section "22.2.4.1.1 Reset" requires
up to 500ms delay. Mitigate the "max" delay by polling the phy until BCM_RESET
bit is clear.

Signed-off-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: Robert Foss <robert.foss@collabora.com>
Tested-by: Robert Foss <robert.foss@collabora.com>
---
 drivers/net/usb/asix_devices.c | 27 ++++++++++++++++++++++++---
 1 file changed, 24 insertions(+), 3 deletions(-)

diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
index 083dc2e..dbcdda2 100644
--- a/drivers/net/usb/asix_devices.c
+++ b/drivers/net/usb/asix_devices.c
@@ -212,6 +212,28 @@ static const struct net_device_ops ax88172_netdev_ops = {
 	.ndo_set_rx_mode	= ax88172_set_multicast,
 };
 
+static void asix_phy_reset(struct usbnet *dev, unsigned int reset_bits)
+{
+	unsigned int timeout = 5000;
+
+	asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, reset_bits);
+
+	/* give phy_id a chance to process reset */
+	udelay(500);
+
+	/* See IEEE 802.3 "22.2.4.1.1 Reset": 500ms max */
+	while (timeout--) {
+		if (asix_mdio_read(dev->net, dev->mii.phy_id, MII_BMCR)
+							& BMCR_RESET)
+			udelay(100);
+		else
+			return;
+	}
+
+	netdev_err(dev->net, "BMCR_RESET timeout on phy_id %d\n",
+		   dev->mii.phy_id);
+}
+
 static int ax88172_bind(struct usbnet *dev, struct usb_interface *intf)
 {
 	int ret = 0;
@@ -258,7 +280,7 @@ static int ax88172_bind(struct usbnet *dev, struct usb_interface *intf)
 	dev->net->needed_headroom = 4; /* cf asix_tx_fixup() */
 	dev->net->needed_tailroom = 4; /* cf asix_tx_fixup() */
 
-	asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
+	asix_phy_reset(dev, BMCR_RESET);
 	asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
 		ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
 	mii_nway_restart(&dev->mii);
@@ -900,8 +922,7 @@ static int ax88178_reset(struct usbnet *dev)
 	} else if (data->phymode == PHY_MODE_RTL8211CL)
 		rtl8211cl_phy_init(dev);
 
-	asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR,
-			BMCR_RESET | BMCR_ANENABLE);
+	asix_phy_reset(dev, BMCR_RESET | BMCR_ANENABLE);
 	asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
 			ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
 	asix_mdio_write(dev->net, dev->mii.phy_id, MII_CTRL1000,
-- 
2.7.4

[PATCH v3 4/5] net: asix: see 802.3 spec for phy reset

[robert.foss-ZGY8ohtN/8qB+jHODAdFcQ]

From: Grant Grundler <grundler-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>

        https://lkml.org/lkml/2014/11/11/947

Ben Hutchings is correct. IEEE 802.3 spec section "22.2.4.1.1 Reset" requires
up to 500ms delay. Mitigate the "max" delay by polling the phy until BCM_RESET
bit is clear.

Signed-off-by: Grant Grundler <grundler-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
Signed-off-by: Robert Foss <robert.foss-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>
Tested-by: Robert Foss <robert.foss-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>
---
 drivers/net/usb/asix_devices.c | 27 ++++++++++++++++++++++++---
 1 file changed, 24 insertions(+), 3 deletions(-)

diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
index 083dc2e..dbcdda2 100644
--- a/drivers/net/usb/asix_devices.c
+++ b/drivers/net/usb/asix_devices.c
@@ -212,6 +212,28 @@ static const struct net_device_ops ax88172_netdev_ops = {
 	.ndo_set_rx_mode	= ax88172_set_multicast,
 };
 
+static void asix_phy_reset(struct usbnet *dev, unsigned int reset_bits)
+{
+	unsigned int timeout = 5000;
+
+	asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, reset_bits);
+
+	/* give phy_id a chance to process reset */
+	udelay(500);
+
+	/* See IEEE 802.3 "22.2.4.1.1 Reset": 500ms max */
+	while (timeout--) {
+		if (asix_mdio_read(dev->net, dev->mii.phy_id, MII_BMCR)
+							& BMCR_RESET)
+			udelay(100);
+		else
+			return;
+	}
+
+	netdev_err(dev->net, "BMCR_RESET timeout on phy_id %d\n",
+		   dev->mii.phy_id);
+}
+
 static int ax88172_bind(struct usbnet *dev, struct usb_interface *intf)
 {
 	int ret = 0;
@@ -258,7 +280,7 @@ static int ax88172_bind(struct usbnet *dev, struct usb_interface *intf)
 	dev->net->needed_headroom = 4; /* cf asix_tx_fixup() */
 	dev->net->needed_tailroom = 4; /* cf asix_tx_fixup() */
 
-	asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
+	asix_phy_reset(dev, BMCR_RESET);
 	asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
 		ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
 	mii_nway_restart(&dev->mii);
@@ -900,8 +922,7 @@ static int ax88178_reset(struct usbnet *dev)
 	} else if (data->phymode == PHY_MODE_RTL8211CL)
 		rtl8211cl_phy_init(dev);
 
-	asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR,
-			BMCR_RESET | BMCR_ANENABLE);
+	asix_phy_reset(dev, BMCR_RESET | BMCR_ANENABLE);
 	asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
 			ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
 	asix_mdio_write(dev->net, dev->mii.phy_id, MII_CTRL1000,
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v3 5/5] net: asix: autoneg will set WRITE_MEDIUM reg

[robert.foss]

From: Grant Grundler <grundler@chromium.org>

The miii_nway_restart() causes a PHY link change activity and
ax88772_link_reset will be called. link_reset will set
AX_CMD_WRITE_MEDIUM_MODE register correctly.

The asix_write_medium_mode in reset() fills in a default value to the register
which may be different from the negotiation result. So do this first.

Ignore the ret value since it's ignored in XXX_link_reset() functions.

Signed-off-by: Grant Grundler <grundler@google.com>
Signed-off-by: Robert Foss <robert.foss@collabora.com>
Tested-by: Robert Foss <robert.foss@collabora.com>
---
 drivers/net/usb/asix_devices.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
index dbcdda2..cce2495 100644
--- a/drivers/net/usb/asix_devices.c
+++ b/drivers/net/usb/asix_devices.c
@@ -928,12 +928,9 @@ static int ax88178_reset(struct usbnet *dev)
 	asix_mdio_write(dev->net, dev->mii.phy_id, MII_CTRL1000,
 			ADVERTISE_1000FULL);
 
+	asix_write_medium_mode(dev, AX88178_MEDIUM_DEFAULT, 0);
 	mii_nway_restart(&dev->mii);
 
-	ret = asix_write_medium_mode(dev, AX88178_MEDIUM_DEFAULT, 0);
-	if (ret < 0)
-		return ret;
-
 	/* Rewrite MAC address */
 	memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN);
 	ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
-- 
2.7.4

Re: [PATCH v3 0/5] net/usb: asix driver improvements

[Robert Foss]

Additional testing has been done the hardware that is available to me.
I'm not seeing any dmesg warnings/errors that are new to this series:

AX88772A
- Pass network_EthernetStressPlug
- Pass phy up/down + iperf3 UDP stress
- Pass network_EthernetStressPlug + iperf3 UDP stress

AX88772B
- Pass network_EthernetStressPlug
- Pass phy up/down + iperf3 UDP stress
- Pass network_EthernetStressPlug + iperf3 UDP stress

Cisco AX88772 A(?)
- Pass network_EthernetStressPlug
- Pass phy up/down + iperf3 UDP stress
- Pass network_EthernetStressPlug + iperf3 UDP stress

Cisco AX88772 B(?)
- Pass network_EthernetStressPlug
- Pass phy up/down + iperf3 UDP stress
- Pass network_EthernetStressPlug + iperf3 UDP stress

AX88178
- Pass network_EthernetStressPlug
- Pass phy up/down + iperf3 UDP stress
- Pass network_EthernetStressPlug + iperf3 UDP stress

AX88179
- Pass network_EthernetStressPlug
- Pass phy up/down + iperf3 UDP stress?
-- [ 8794.555902] ax88179_178a 1-1.3:1.0 eth1: kevent 4 may have been
    dropped
- Pass network_EthernetStressPlug + iperf3 UDP stresss


I also saw some sporadic header checksum errors.
But those too are seen on upstream/master.

asix_rx_fixup() Bad Header Length 0x98a993c8, offset 4


Test details:
network_EthernetStressPlug:
     http://memcpy.io/ethernet-device-stress-testing.html

phy up/down:
     for i in
         {1..10}
     do
         sudo ifdown eth1
         if sudo ifup eth1; then
            echo "Command success"
        else
            echo "Command failed"
        fi
     done

iperf3 UDP:
     sudo iperf3 -c 192.168.0.28 -u  -b 100M -t 0





On 2016-08-29 09:32 AM, robert.foss@collabora.com wrote:
> From: Robert Foss <robert.foss@collabora.com>
>
> This is a resubmission of v3, since the netdev
> mailinlist was not sent the previous submission.
>
> This series improves power management of the asix driver.
>
>  - Suspend/resume support is improved to save needed registers.
>  - Device disconnection is improved.
>  - Fixes AX88772x resume failures
>  - Implementes IEEE 802.3 spec section "22.2.4.1.1 Reset" correctly
>  - Fixes AX_CMD_WRITE_MEDIUM_MODE being set incorrectly
>
> Changes since v1:
> - Added proper metadata tags to series.
> - Added two more patches to series.
>
> Changes since v2:
> - Added coverletter
> - Tested patches on AX88772A/AX88772B/AX88178/AX88179 hardware
>
> Allan Chou (1):
>   net: asix: Fix AX88772x resume failures
>
> Freddy Xin (1):
>   net: asix: Add in_pm parameter
>
> Grant Grundler (2):
>   net: asix: see 802.3 spec for phy reset
>   net: asix: autoneg will set WRITE_MEDIUM reg
>
> Vincent Palatin (1):
>   net: asix: Avoid looping when the device is disconnected
>
>  drivers/net/usb/asix.h         |  40 ++-
>  drivers/net/usb/asix_common.c  | 212 ++++++++++++----
>  drivers/net/usb/asix_devices.c | 450 +++++++++++++++++++++++++++-------
>  drivers/net/usb/ax88172a.c     |  29 +-
>  4 files changed, 575 insertions(+), 156 deletions(-)
>

Re: [PATCH v3 0/5] net/usb: asix driver improvements

[David Miller]

From: robert.foss@collabora.com
Date: Mon, 29 Aug 2016 09:32:14 -0400

> This is a resubmission of v3, since the netdev
> mailinlist was not sent the previous submission.
> 
> This series improves power management of the asix driver.
 ...

Series applied, thanks.

[PATCH v3 0/5] net/usb: asix driver improvements

[robert.foss]

From: Robert Foss <robert.foss@collabora.com>

This is a resubmission of v3, since the netdev
mailinlist was not sent the previous submission.

This series improves power management of the asix driver.

 - Suspend/resume support is improved to save needed registers.
 - Device disconnection is improved.
 - Fixes AX88772x resume failures
 - Implementes IEEE 802.3 spec section "22.2.4.1.1 Reset" correctly
 - Fixes AX_CMD_WRITE_MEDIUM_MODE being set incorrectly

Changes since v1:
- Added proper metadata tags to series.
- Added two more patches to series.

Changes since v2:
- Added coverletter
- Tested patches on AX88772A/AX88772B/AX88178/AX88179 hardware

Allan Chou (1):
  net: asix: Fix AX88772x resume failures

Freddy Xin (1):
  net: asix: Add in_pm parameter

Grant Grundler (2):
  net: asix: see 802.3 spec for phy reset
  net: asix: autoneg will set WRITE_MEDIUM reg

Vincent Palatin (1):
  net: asix: Avoid looping when the device is disconnected

 drivers/net/usb/asix.h         |  40 ++-
 drivers/net/usb/asix_common.c  | 212 ++++++++++++----
 drivers/net/usb/asix_devices.c | 450 +++++++++++++++++++++++++++-------
 drivers/net/usb/ax88172a.c     |  29 +-
 4 files changed, 575 insertions(+), 156 deletions(-)

-- 
git-series 0.8.10

[PATCH v3 0/5] net/usb: asix driver improvements

[robert.foss-ZGY8ohtN/8qB+jHODAdFcQ]

From: Robert Foss <robert.foss-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>

This is a resubmission of v3, since the netdev
mailinlist was not sent the previous submission.

This series improves power management of the asix driver.

 - Suspend/resume support is improved to save needed registers.
 - Device disconnection is improved.
 - Fixes AX88772x resume failures
 - Implementes IEEE 802.3 spec section "22.2.4.1.1 Reset" correctly
 - Fixes AX_CMD_WRITE_MEDIUM_MODE being set incorrectly

Changes since v1:
- Added proper metadata tags to series.
- Added two more patches to series.

Changes since v2:
- Added coverletter
- Tested patches on AX88772A/AX88772B/AX88178/AX88179 hardware

Allan Chou (1):
  net: asix: Fix AX88772x resume failures

Freddy Xin (1):
  net: asix: Add in_pm parameter

Grant Grundler (2):
  net: asix: see 802.3 spec for phy reset
  net: asix: autoneg will set WRITE_MEDIUM reg

Vincent Palatin (1):
  net: asix: Avoid looping when the device is disconnected

 drivers/net/usb/asix.h         |  40 ++-
 drivers/net/usb/asix_common.c  | 212 ++++++++++++----
 drivers/net/usb/asix_devices.c | 450 +++++++++++++++++++++++++++-------
 drivers/net/usb/ax88172a.c     |  29 +-
 4 files changed, 575 insertions(+), 156 deletions(-)

-- 
git-series 0.8.10
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html