All of lore.kernel.org
 help / color / mirror / Atom feed
From: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
To: qemu-devel@nongnu.org, imammedo@redhat.com, mst@redhat.com,
	pbonzini@redhat.com
Cc: guz.fnst@cn.fujitsu.com, izumi.taku@jp.fujitsu.com,
	Zhu Guihua <zhugh.fnst@cn.fujitsu.com>,
	tangchen@cn.fujitsu.com
Subject: [Qemu-devel] [PATCH v6 7/8] acpi: add hardware implementation for memory hot unplug
Date: Thu, 2 Apr 2015 17:50:23 +0800	[thread overview]
Message-ID: <d1713a99e7ca1dcecc69b576b1df23e28679e873.1427954659.git.zhugh.fnst@cn.fujitsu.com> (raw)
In-Reply-To: <cover.1427954659.git.zhugh.fnst@cn.fujitsu.com>

- implements QEMU hardware part of memory hot unplug protocol
  described at "docs/spec/acpi_mem_hotplug.txt"
- handles memory remove notification event
- handles device eject notification

Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
---
 docs/specs/acpi_mem_hotplug.txt   | 11 +++++++++--
 hw/acpi/memory_hotplug.c          | 21 ++++++++++++++++++++-
 hw/core/qdev.c                    |  2 +-
 hw/i386/acpi-build.c              | 12 ++++++++++++
 hw/i386/acpi-dsdt-mem-hotplug.dsl | 13 ++++++++++++-
 include/hw/acpi/pc-hotplug.h      |  3 +++
 include/hw/qdev-core.h            |  1 +
 trace-events                      |  3 +++
 8 files changed, 61 insertions(+), 5 deletions(-)

diff --git a/docs/specs/acpi_mem_hotplug.txt b/docs/specs/acpi_mem_hotplug.txt
index 68daa14..3df3620 100644
--- a/docs/specs/acpi_mem_hotplug.txt
+++ b/docs/specs/acpi_mem_hotplug.txt
@@ -19,7 +19,9 @@ Memory hot-plug interface (IO port 0xa00-0xa17, 1-4 byte access):
               1: Device insert event, used to distinguish device for which
                  no device check event to OSPM was issued.
                  It's valid only when bit 1 is set.
-              2-7: reserved and should be ignored by OSPM
+              2: Device remove event, used to distinguish device for which
+                 no device eject request to OSPM was issued.
+              3-7: reserved and should be ignored by OSPM
       [0x15-0x17] reserved
 
   write access:
@@ -38,7 +40,12 @@ Memory hot-plug interface (IO port 0xa00-0xa17, 1-4 byte access):
               1: if set to 1 clears device insert event, set by OSPM
                  after it has emitted device check event for the
                  selected memory device
-              2-7: reserved, OSPM must clear them before writing to register
+              2: if set to 1 clears device remove event, set by OSPM
+                 after it has emitted device eject request for the
+                 selected memory device
+              3: if set to 1 initiates device eject, set by OSPM when it
+                 triggers memory device removal and calls _EJ0 method
+              4-7: reserved, OSPM must clear them before writing to register
 
 Selecting memory device slot beyond present range has no effect on platform:
    - write accesses to memory hot-plug registers not documented above are
diff --git a/hw/acpi/memory_hotplug.c b/hw/acpi/memory_hotplug.c
index 07e281f..35bbfeb 100644
--- a/hw/acpi/memory_hotplug.c
+++ b/hw/acpi/memory_hotplug.c
@@ -2,6 +2,7 @@
 #include "hw/acpi/pc-hotplug.h"
 #include "hw/mem/pc-dimm.h"
 #include "hw/boards.h"
+#include "hw/qdev-core.h"
 #include "trace.h"
 #include "qapi-event.h"
 
@@ -91,6 +92,8 @@ static void acpi_memory_hotplug_write(void *opaque, hwaddr addr, uint64_t data,
     MemHotplugState *mem_st = opaque;
     MemStatus *mdev;
     ACPIOSTInfo *info;
+    DeviceState *dev = NULL;
+    HotplugHandler *hotplug_ctrl = NULL;
 
     if (!mem_st->dev_count) {
         return;
@@ -128,13 +131,29 @@ static void acpi_memory_hotplug_write(void *opaque, hwaddr addr, uint64_t data,
         qapi_event_send_acpi_device_ost(info, &error_abort);
         qapi_free_ACPIOSTInfo(info);
         break;
-    case 0x14:
+    case 0x14: /* set is_* fields  */
         mdev = &mem_st->devs[mem_st->selector];
         if (data & 2) { /* clear insert event */
             mdev->is_inserting  = false;
             trace_mhp_acpi_clear_insert_evt(mem_st->selector);
+        } else if (data & 4) {
+            mdev->is_removing = false;
+            trace_mhp_acpi_clear_remove_evt(mem_st->selector);
+        } else if (data & 8) {
+            if (!mdev->is_enabled) {
+                trace_mhp_acpi_ejecting_invalid_slot(mem_st->selector);
+                break;
+            }
+
+            dev = DEVICE(mdev->dimm);
+            hotplug_ctrl = qdev_get_hotplug_handler(dev);
+            /* call pc-dimm unplug cb */
+            hotplug_handler_unplug(hotplug_ctrl, dev, NULL);
+            trace_mhp_acpi_pc_dimm_deleted(mem_st->selector);
         }
         break;
+    default:
+        break;
     }
 
 }
diff --git a/hw/core/qdev.c b/hw/core/qdev.c
index 6e6a65d..b0f0f84 100644
--- a/hw/core/qdev.c
+++ b/hw/core/qdev.c
@@ -273,7 +273,7 @@ void qdev_set_legacy_instance_id(DeviceState *dev, int alias_id,
     dev->alias_required_for_version = required_for_version;
 }
 
-static HotplugHandler *qdev_get_hotplug_handler(DeviceState *dev)
+HotplugHandler *qdev_get_hotplug_handler(DeviceState *dev)
 {
     HotplugHandler *hotplug_ctrl = NULL;
 
diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
index eb66fef..96c1db3 100644
--- a/hw/i386/acpi-build.c
+++ b/hw/i386/acpi-build.c
@@ -931,6 +931,12 @@ build_ssdt(GArray *table_data, GArray *linker,
         aml_append(field,
             /*(read) 1 if has a insert event. (write) 1 to clear event */
             aml_named_field(stringify(MEMORY_SLOT_INSERT_EVENT), 1));
+        aml_append(field,
+            /* (read) 1 if has a remove event. (write) 1 to clear event */
+            aml_named_field(stringify(MEMORY_SLOT_REMOVE_EVENT), 1));
+        aml_append(field,
+            /* initiates device eject, write only */
+            aml_named_field(stringify(MEMORY_SLOT_EJECT), 1));
         aml_append(scope, field);
 
         field = aml_field(stringify(MEMORY_HOTPLUG_IO_REGION), aml_dword_acc,
@@ -975,6 +981,12 @@ build_ssdt(GArray *table_data, GArray *linker,
             )));
             aml_append(dev, method);
 
+            method = aml_method("_EJ0", 1);
+            s = BASEPATH stringify(MEMORY_SLOT_EJECT_METHOD);
+            aml_append(method, aml_return(aml_call2(
+                       s, aml_name("_UID"), aml_arg(0))));
+            aml_append(dev, method);
+
             aml_append(sb_scope, dev);
         }
 
diff --git a/hw/i386/acpi-dsdt-mem-hotplug.dsl b/hw/i386/acpi-dsdt-mem-hotplug.dsl
index 1e9ec39..c2bb6a1 100644
--- a/hw/i386/acpi-dsdt-mem-hotplug.dsl
+++ b/hw/i386/acpi-dsdt-mem-hotplug.dsl
@@ -29,6 +29,8 @@
             External(MEMORY_SLOT_PROXIMITY, FieldUnitObj) // read only
             External(MEMORY_SLOT_ENABLED, FieldUnitObj) // 1 if enabled, read only
             External(MEMORY_SLOT_INSERT_EVENT, FieldUnitObj) // (read) 1 if has a insert event. (write) 1 to clear event
+            External(MEMORY_SLOT_REMOVE_EVENT, FieldUnitObj) // (read) 1 if has a remove event. (write) 1 to clear event
+            External(MEMORY_SLOT_EJECT, FieldUnitObj) // initiates device eject, write only
             External(MEMORY_SLOT_SLECTOR, FieldUnitObj) // DIMM selector, write only
             External(MEMORY_SLOT_OST_EVENT, FieldUnitObj) // _OST event code, write only
             External(MEMORY_SLOT_OST_STATUS, FieldUnitObj) // _OST status code, write only
@@ -55,8 +57,10 @@
                     If (LEqual(MEMORY_SLOT_INSERT_EVENT, One)) { // Memory device needs check
                         MEMORY_SLOT_NOTIFY_METHOD(Local0, 1)
                         Store(1, MEMORY_SLOT_INSERT_EVENT)
+                    } Elseif (LEqual(MEMORY_SLOT_REMOVE_EVENT, One)) { // Ejection request
+                        MEMORY_SLOT_NOTIFY_METHOD(Local0, 3)
+                        Store(1, MEMORY_SLOT_REMOVE_EVENT)
                     }
-                    // TODO: handle memory eject request
                     Add(Local0, One, Local0) // goto next DIMM
                 }
                 Release(MEMORY_SLOT_LOCK)
@@ -156,5 +160,12 @@
                 Store(Arg2, MEMORY_SLOT_OST_STATUS)
                 Release(MEMORY_SLOT_LOCK)
             }
+
+            Method(MEMORY_SLOT_EJECT_METHOD, 2) {
+                Acquire(MEMORY_SLOT_LOCK, 0xFFFF)
+                Store(ToInteger(Arg0), MEMORY_SLOT_SLECTOR) // select DIMM
+                Store(1, MEMORY_SLOT_EJECT)
+                Release(MEMORY_SLOT_LOCK)
+            }
         } // Device()
     } // Scope()
diff --git a/include/hw/acpi/pc-hotplug.h b/include/hw/acpi/pc-hotplug.h
index efa6ed7..0513c1c 100644
--- a/include/hw/acpi/pc-hotplug.h
+++ b/include/hw/acpi/pc-hotplug.h
@@ -43,6 +43,8 @@
 #define MEMORY_SLOT_PROXIMITY        MPX
 #define MEMORY_SLOT_ENABLED          MES
 #define MEMORY_SLOT_INSERT_EVENT     MINS
+#define MEMORY_SLOT_REMOVE_EVENT     MRMV
+#define MEMORY_SLOT_EJECT            MEJ
 #define MEMORY_SLOT_SLECTOR          MSEL
 #define MEMORY_SLOT_OST_EVENT        MOEV
 #define MEMORY_SLOT_OST_STATUS       MOSC
@@ -51,6 +53,7 @@
 #define MEMORY_SLOT_CRS_METHOD       MCRS
 #define MEMORY_SLOT_OST_METHOD       MOST
 #define MEMORY_SLOT_PROXIMITY_METHOD MPXM
+#define MEMORY_SLOT_EJECT_METHOD     MEJ0
 #define MEMORY_SLOT_NOTIFY_METHOD    MTFY
 #define MEMORY_SLOT_SCAN_METHOD      MSCN
 
diff --git a/include/hw/qdev-core.h b/include/hw/qdev-core.h
index 4e673f9..5b7acf1 100644
--- a/include/hw/qdev-core.h
+++ b/include/hw/qdev-core.h
@@ -266,6 +266,7 @@ int qdev_init(DeviceState *dev) QEMU_WARN_UNUSED_RESULT;
 void qdev_init_nofail(DeviceState *dev);
 void qdev_set_legacy_instance_id(DeviceState *dev, int alias_id,
                                  int required_for_version);
+HotplugHandler *qdev_get_hotplug_handler(DeviceState *dev);
 void qdev_unplug(DeviceState *dev, Error **errp);
 void qdev_simple_device_unplug_cb(HotplugHandler *hotplug_dev,
                                   DeviceState *dev, Error **errp);
diff --git a/trace-events b/trace-events
index 30eba92..46f6ef0 100644
--- a/trace-events
+++ b/trace-events
@@ -1562,6 +1562,7 @@ vfio_put_base_device(int fd) "close vdev->fd=%d"
 
 #hw/acpi/memory_hotplug.c
 mhp_acpi_invalid_slot_selected(uint32_t slot) "0x%"PRIx32
+mhp_acpi_ejecting_invalid_slot(uint32_t slot) "0x%"PRIx32
 mhp_acpi_read_addr_lo(uint32_t slot, uint32_t addr) "slot[0x%"PRIx32"] addr lo: 0x%"PRIx32
 mhp_acpi_read_addr_hi(uint32_t slot, uint32_t addr) "slot[0x%"PRIx32"] addr hi: 0x%"PRIx32
 mhp_acpi_read_size_lo(uint32_t slot, uint32_t size) "slot[0x%"PRIx32"] size lo: 0x%"PRIx32
@@ -1572,6 +1573,8 @@ mhp_acpi_write_slot(uint32_t slot) "set active slot: 0x%"PRIx32
 mhp_acpi_write_ost_ev(uint32_t slot, uint32_t ev) "slot[0x%"PRIx32"] OST EVENT: 0x%"PRIx32
 mhp_acpi_write_ost_status(uint32_t slot, uint32_t st) "slot[0x%"PRIx32"] OST STATUS: 0x%"PRIx32
 mhp_acpi_clear_insert_evt(uint32_t slot) "slot[0x%"PRIx32"] clear insert event"
+mhp_acpi_clear_remove_evt(uint32_t slot) "slot[0x%"PRIx32"] clear remove event"
+mhp_acpi_pc_dimm_deleted(uint32_t slot) "slot[0x%"PRIx32"] pc-dimm deleted"
 
 # hw/i386/pc.c
 mhp_pc_dimm_assigned_slot(int slot) "0x%d"
-- 
1.9.3

  parent reply	other threads:[~2015-04-02  9:52 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-04-02  9:50 [Qemu-devel] [PATCH v6 0/8] QEMU memory hot unplug support Zhu Guihua
2015-04-02  9:50 ` [Qemu-devel] [PATCH v6 2/8] acpi, mem-hotplug: add acpi_memory_slot_status() to get MemStatus Zhu Guihua
2015-04-02  9:50 ` [Qemu-devel] [PATCH v6 3/8] acpi, mem-hotplug: add unplug request cb for memory device Zhu Guihua
2015-04-02  9:50 ` [Qemu-devel] [PATCH v6 4/8] acpi, mem-hotplug: add unplug " Zhu Guihua
2015-04-02  9:50 ` [Qemu-devel] [PATCH v6 5/8] acpi: extend aml_field() to support UpdateRule Zhu Guihua
2015-04-02  9:50 ` [Qemu-devel] [PATCH v6 6/8] acpi: fix "Memory device control fields" register Zhu Guihua
2015-04-02  9:50 ` Zhu Guihua [this message]
2015-04-02  9:50 ` [Qemu-devel] [PATCH v6 8/8] qmp-event: add event notification for memory hot unplug error Zhu Guihua
2015-04-10 15:37   ` Eric Blake
2015-04-13  1:56     ` Zhu Guihua
2015-04-13 14:40       ` Eric Blake
2015-04-13 14:43         ` Paolo Bonzini
2015-04-08  9:49 ` [Qemu-devel] [PATCH v6 0/8] QEMU memory hot unplug support Zhu Guihua
2015-04-08  9:52   ` Michael S. Tsirkin
2015-04-08 10:47     ` Paulo Ricardo Paz Vital
2015-04-09  1:16       ` Zhu Guihua
2015-04-09  8:28         ` Igor Mammedov
2015-04-09 10:01           ` Zhu Guihua
2015-04-10 15:17 ` Igor Mammedov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=d1713a99e7ca1dcecc69b576b1df23e28679e873.1427954659.git.zhugh.fnst@cn.fujitsu.com \
    --to=zhugh.fnst@cn.fujitsu.com \
    --cc=guz.fnst@cn.fujitsu.com \
    --cc=imammedo@redhat.com \
    --cc=izumi.taku@jp.fujitsu.com \
    --cc=mst@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=tangchen@cn.fujitsu.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.