BTRFS critical (device md126): corrupt node: root=1 block=13404298215424 slot=307, unaligned pointer, have 12567101254720864896 should be aligned to 4096

* BTRFS critical (device md126): corrupt node: root=1 block=13404298215424 slot=307, unaligned pointer, have 12567101254720864896 should be aligned to 4096
@ 2022-07-07  1:32 Denis Roy
  2022-07-07  2:19 ` Qu Wenruo
  0 siblings, 1 reply; 14+ messages in thread
From: Denis Roy @ 2022-07-07  1:32 UTC (permalink / raw)
  To: linux-btrfs

I am using netgate readynas firmware 6.10.7, 5 drives ,X-RAID.  I had a 
power failure, but the nas never did a full shutdown. Nevertheless, the 
raid was in RO when I notice there was a problem. At the time I thought 
it was plex app, so I rebooted and then the raid never cam up.  Ever 
where you read up on BTRFS, they say don’t try commands you can do more 
dameage. So here I am. I added some info I believe you need and if there 
anything else, let me know.

root@nas:~# btrfs version

btrfs-progs v4.16

root@nas:~# uname -a

Linux nas 4.4.218.x86_64.1 #1 SMP Sun Nov 7 15:20:05 UTC 2021 x86_64 
GNU/Linux

root@nas:~# btrfs fi show

Label: '33ea130b:root'  uuid: 4a0317c0-214d-4204-b722-d6176eae04c0

        Total devices 1 FS bytes used 1.70GiB

        devid    1 size 4.00GiB used 2.86GiB path /dev/md0

Label: '33ea130b:data'  uuid: cdc0bc68-6685-42df-a26f-63b1db286b12

        Total devices 2 FS bytes used 8.81TiB

        devid    1 size 10.90TiB used 9.00TiB path /dev/md127

        devid    2 size 2.73TiB used 19.03GiB path /dev/md126

root@nas:~# dmesg version

[    0.000000] Initializing cgroup subsys cpuset

[    0.000000] Initializing cgroup subsys cpu

[    0.000000] Initializing cgroup subsys cpuacct

[    0.000000] Linux version 4.4.218.x86_64.1 (root@blocks) (gcc version 
8.3.0 (Debian 8.3.0-6) ) #1 SMP Sun Nov 7 15:20:05 UTC 2021

[    0.000000] Command line: initrd=initrd.gz reason=normal 
BOOT_IMAGE=kernel

[    0.000000] KERNEL supported cpus:

[    0.000000]   Intel GenuineIntel

[    0.000000] Disabled fast string operations

[    0.000000] x86/fpu: Legacy x87 FPU detected.

[    0.000000] e820: BIOS-provided physical RAM map:

[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cbff] usable

[    0.000000] BIOS-e820: [mem 0x000000000009cc00-0x000000000009ffff] 
reserved

[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] 
reserved

[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000afeaffff] usable

[    0.000000] BIOS-e820: [mem 0x00000000afeb0000-0x00000000afebdfff] 
ACPI data

[    0.000000] BIOS-e820: [mem 0x00000000afebe000-0x00000000afeeffff] 
ACPI NVS

[    0.000000] BIOS-e820: [mem 0x00000000afef0000-0x00000000afefffff] 
reserved

[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] 
reserved

[    0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] 
reserved

[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000024fffffff] usable

[    0.000000] NX (Execute Disable) protection: active

[    0.000000] SMBIOS 2.4 present.

[    0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./To be 
filled by O.E.M., BIOS 080014 07/26/2010

[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved

[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable

[    0.000000] e820: last_pfn = 0x250000 max_arch_pfn = 0x400000000

[    0.000000] MTRR default type: uncachable

[    0.000000] MTRR fixed ranges enabled:

[    0.000000]   00000-9FFFF write-back

[    0.000000]   A0000-BFFFF uncachable

[    0.000000]   C0000-DFFFF write-protect

[    0.000000]   E0000-EFFFF write-through

[    0.000000]   F0000-FFFFF write-protect

[    0.000000] MTRR variable ranges enabled:

[    0.000000]   0 base 000000000 mask E00000000 write-back

[    0.000000]   1 base 200000000 mask FC0000000 write-back

[    0.000000]   2 base 240000000 mask FF0000000 write-back

[    0.000000]   3 base 0B0000000 mask FF0000000 uncachable

[    0.000000]   4 base 0C0000000 mask FC0000000 uncachable

[    0.000000]   5 base 0AFF00000 mask FFFF00000 uncachable

[    0.000000]   6 disabled

[    0.000000]   7 disabled

[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT

[    0.000000] e820: update [mem 0xaff00000-0xffffffff] usable ==> reserved

[    0.000000] e820: last_pfn = 0xafeb0 max_arch_pfn = 0x400000000

[    0.000000] Base memory trampoline at [ffff880000094000] 94000 size 28672

[    0.000000] BRK [0x08f56000, 0x08f56fff] PGTABLE

[    0.000000] BRK [0x08f57000, 0x08f57fff] PGTABLE

[    0.000000] BRK [0x08f58000, 0x08f58fff] PGTABLE

[    0.000000] BRK [0x08f59000, 0x08f59fff] PGTABLE

[    0.000000] BRK [0x08f5a000, 0x08f5afff] PGTABLE

[    0.000000] BRK [0x08f5b000, 0x08f5bfff] PGTABLE

[    0.000000] RAMDISK: [mem 0x7fb9f000-0x7fffffff]

[    0.000000] ACPI: Early table checksum verification disabled

[    0.000000] ACPI: RSDP 0x00000000000F9C00 000014 (v00 ACPIAM)

[    0.000000] ACPI: RSDT 0x00000000AFEB0000 000038 (v01 A M I  OEMRSDT  
07001026 MSFT 00000097)

[    0.000000] ACPI: FACP 0x00000000AFEB0200 000084 (v02 A M I  OEMFACP  
07001026 MSFT 00000097)

[    0.000000] ACPI: DSDT 0x00000000AFEB0440 005B7A (v01 1ADHK  1ADHK007 
00000007 INTL 20051117)

[    0.000000] ACPI: FACS 0x00000000AFEBE000 000040

[    0.000000] ACPI: APIC 0x00000000AFEB0390 00006C (v01 A M I  OEMAPIC  
07001026 MSFT 00000097)

[    0.000000] ACPI: MCFG 0x00000000AFEB0400 00003C (v01 A M I  OEMMCFG  
07001026 MSFT 00000097)

[    0.000000] ACPI: OEMB 0x00000000AFEBE040 000060 (v01 A M I  AMI_OEM  
07001026 MSFT 00000097)

[    0.000000] ACPI: GSCI 0x00000000AFEBE0A0 002024 (v01 A M I  GMCHSCI  
07001026 MSFT 00000097)

[    0.000000] ACPI: Local APIC address 0xfee00000

[    0.000000] Zone ranges:

[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]

[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]

[    0.000000]   Normal   [mem 0x0000000100000000-0x000000024fffffff]

[    0.000000] Movable zone start for each node

[    0.000000] Early memory node ranges

[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009bfff]

[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000afeaffff]

[    0.000000]   node   0: [mem 0x0000000100000000-0x000000024fffffff]

[    0.000000] Initmem setup node 0 [mem 
0x0000000000001000-0x000000024fffffff]

[    0.000000] On node 0 totalpages: 2096715

[    0.000000]   DMA zone: 64 pages used for memmap

[    0.000000]   DMA zone: 22 pages reserved

[    0.000000]   DMA zone: 3995 pages, LIFO batch:0

[    0.000000]   DMA32 zone: 11195 pages used for memmap

[    0.000000]   DMA32 zone: 716464 pages, LIFO batch:31

[    0.000000]   Normal zone: 21504 pages used for memmap

[    0.000000]   Normal zone: 1376256 pages, LIFO batch:31

[    0.000000] Reserving Intel graphics stolen memory at 
0xaff00000-0xafffffff

[    0.000000] ACPI: PM-Timer IO Port: 0x808

[    0.000000] ACPI: Local APIC address 0xfee00000

[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 
0-23

[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)

[    0.000000] ACPI: IRQ0 used by override.

[    0.000000] ACPI: IRQ9 used by override.

[    0.000000] Using ACPI (MADT) for SMP configuration information

[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs

[    0.000000] e820: [mem 0xb0000000-0xfedfffff] available for PCI devices

[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff 
max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns

[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 
nr_node_ids:1

[    0.000000] PERCPU: Embedded 30 pages/cpu @ffff88024fc00000 s82392 
r8192 d32296 u524288

[    0.000000] pcpu-alloc: s82392 r8192 d32296 u524288 alloc=1*2097152

[    0.000000] pcpu-alloc: [0] 0 1 2 3

[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  
Total pages: 2063930

[    0.000000] Kernel command line: console=tty0 console=ttyS0,115200 
hpet=disable initrd=initrd.gz reason=normal BOOT_IMAGE=kernel

[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)

[    0.000000] Dentry cache hash table entries: 1048576 (order: 11, 
8388608 bytes)

[    0.000000] Inode-cache hash table entries: 524288 (order: 10, 
4194304 bytes)

[    0.000000] Memory: 8156496K/8386860K available (9142K kernel code, 
989K rwdata, 3940K rodata, 872K init, 696K bss, 230364K reserved, 0K 
cma-reserved)

[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1

[    0.000000] Kernel/User page tables isolation: enabled

[    0.000000] Hierarchical RCU implementation.

[    0.000000]      RCU debugfs-based tracing is enabled.

[    0.000000]      Build-time adjustment of leaf fanout to 64.

[    0.000000]      RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.

[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4

[    0.000000] NR_IRQS:4352 nr_irqs:456 16

[    0.000000] Console: colour VGA+ 80x25

[    0.000000] console [tty0] enabled

[    0.000000] console [ttyS0] enabled

[    0.000000] tsc: Fast TSC calibration using PIT

[    0.000000] tsc: Detected 2660.100 MHz processor

[    0.001011] Calibrating delay loop (skipped), value calculated using 
timer frequency.. 5320.20 BogoMIPS (lpj=2660100)

[    0.001014] pid_max: default: 32768 minimum: 301

[    0.001020] ACPI: Core revision 20150930

[    0.004916] ACPI: 1 ACPI AML tables successfully acquired and loaded

[    0.004937] Security Framework initialized

[    0.004948] Mount-cache hash table entries: 16384 (order: 5, 131072 
bytes)

[    0.004951] Mountpoint-cache hash table entries: 16384 (order: 5, 
131072 bytes)

[    0.005355] Initializing cgroup subsys io

[    0.005360] Initializing cgroup subsys memory

[    0.005370] Initializing cgroup subsys devices

[    0.005374] Initializing cgroup subsys freezer

[    0.005378] Initializing cgroup subsys net_cls

[    0.005382] Initializing cgroup subsys perf_event

[    0.005385] Initializing cgroup subsys net_prio

[    0.005389] Initializing cgroup subsys pids

[    0.005406] Disabled fast string operations

[    0.005410] CPU: Physical Processor ID: 0

[    0.005411] CPU: Processor Core ID: 0

[    0.005413] mce: CPU supports 6 MCE banks

[    0.005423] CPU0: Thermal monitoring enabled (TM2)

[    0.005426] process: using mwait in idle threads

[    0.005431] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4

[    0.005433] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0

[    0.005435] Spectre V1 : Mitigation: usercopy/swapgs barriers and 
__user pointer sanitization

[    0.005438] Spectre V2 : Mitigation: Full generic retpoline

[    0.005439] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling 
RSB on context switch

[    0.005441] Speculative Store Bypass: Vulnerable

[    0.005464] MDS: Vulnerable: Clear CPU buffers attempted, no microcode

[    0.005833] Freeing SMP alternatives memory: 40K

[    0.006445] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1

[    0.118836] smpboot: CPU0: Intel(R) Xeon(R) CPU           X3230  @ 
2.66GHz (family: 0x6, model: 0xf, stepping: 0xb)

[    0.118850] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, 
Intel PMU driver.

[    0.118861] perf_event_intel: PEBS disabled due to CPU errata

[    0.118864] ... version: 2

[    0.118865] ... bit width: 40

[    0.118866] ... generic registers: 2

[    0.118868] ... value mask: 000000ffffffffff

[    0.118869] ... max period: 000000007fffffff

[    0.118870] ... fixed-purpose events: 3

[    0.118872] ... event mask: 0000000700000003

[    0.119646] x86: Booting SMP configuration:

[    0.119649] .... node  #0, CPUs: #1 #2 #3

[    0.124026] x86: Booted up 1 node, 4 CPUs

[    0.124031] smpboot: Total of 4 processors activated (21280.80 BogoMIPS)

[    0.125124] NMI watchdog: enabled on all CPUs, permanently consumes 
one hw-PMU counter.

[    0.125195] devtmpfs: initialized

[    0.126201] clocksource: jiffies: mask: 0xffffffff max_cycles: 
0xffffffff, max_idle_ns: 1911260446275000 ns

[    0.126209] futex hash table entries: 1024 (order: 4, 65536 bytes)

[    0.126263] xor: measuring software checksum speed

[    0.136001]    prefetch64-sse: 15092.000 MB/sec

[    0.146001]    generic_sse: 12756.000 MB/sec

[    0.146003] xor: using function: prefetch64-sse (15092.000 MB/sec)

[    0.146010] pinctrl core: initialized pinctrl subsystem

[    0.146193] NET: Registered protocol family 16

[    0.150006] cpuidle: using governor ladder

[    0.154004] cpuidle: using governor menu

[    0.154232] ACPI: bus type PCI registered

[    0.154339] dca service started, version 1.12.1

[    0.154354] PCI: Using configuration type 1 for base access

[    0.180775] raid6: sse2x1   gen()  4031 MB/s

[    0.197772] raid6: sse2x1   xor()  4281 MB/s

[    0.214771] raid6: sse2x2   gen()  4476 MB/s

[    0.231775] raid6: sse2x2   xor()  5458 MB/s

[    0.248772] raid6: sse2x4   gen()  7894 MB/s

[    0.265772] raid6: sse2x4   xor()  5812 MB/s

[    0.265774] raid6: using algorithm sse2x4 gen() 7894 MB/s

[    0.265775] raid6: .... xor() 5812 MB/s, rmw enabled

[    0.265777] raid6: using ssse3x2 recovery algorithm

[    0.266024] ACPI: Added _OSI(Module Device)

[    0.266024] ACPI: Added _OSI(Processor Device)

[    0.266024] ACPI: Added _OSI(3.0 _SCP Extensions)

[    0.266024] ACPI: Added _OSI(Processor Aggregator Device)

[    0.267725] ACPI: Executed 1 blocks of module-level executable AML code

[    0.270238] ACPI: Interpreter enabled

[    0.270244] ACPI: (supports S0 S5)

[    0.270246] ACPI: Using IOAPIC for interrupt routing

[    0.270278] PCI: Using host bridge windows from ACPI; if necessary, 
use "pci=nocrs" and report a bug

[    0.276431] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])

[    0.276436] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments 
MSI]

[    0.276442] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM

[    0.276535] PCI host bridge to bus 0000:00

[    0.276539] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]

[    0.276541] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]

[    0.276544] pci_bus 0000:00: root bus resource [mem 
0x000a0000-0x000bffff window]

[    0.276546] pci_bus 0000:00: root bus resource [mem 
0x000d0000-0x000dffff window]

[    0.276549] pci_bus 0000:00: root bus resource [mem 
0xaff00000-0xffffffff window]

[    0.276551] pci_bus 0000:00: root bus resource [bus 00-ff]

[    0.276566] pci 0000:00:00.0: [8086:2990] type 00 class 0x060000

[    0.276676] pci 0000:00:02.0: [8086:2992] type 00 class 0x030000

[    0.276689] pci 0000:00:02.0: reg 0x10: [mem 0xffa00000-0xffafffff]

[    0.276705] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 
64bit pref]

[    0.276710] pci 0000:00:02.0: reg 0x20: [io  0xec00-0xec07]

[    0.276829] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300

[    0.276873] pci 0000:00:1a.0: reg 0x20: [io  0xe000-0xe01f]

[    0.277017] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300

[    0.277023] pci 0000:00:1a.1: reg 0x20: [io  0xdc00-0xdc1f]

[    0.277130] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320

[    0.277159] pci 0000:00:1a.7: reg 0x10: [mem 0xff9fb400-0xff9fb7ff]

[    0.277223] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold

[    0.277312] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300

[    0.277340] pci 0000:00:1b.0: reg 0x10: [mem 0xff9f4000-0xff9f7fff 64bit]

[    0.277391] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold

[    0.277473] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400

[    0.277536] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold

[    0.277624] pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400

[    0.277688] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold

[    0.277778] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300

[    0.277821] pci 0000:00:1d.0: reg 0x20: [io  0xd880-0xd89f]

[    0.277920] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300

[    0.277963] pci 0000:00:1d.1: reg 0x20: [io  0xd800-0xd81f]

[    0.278070] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300

[    0.278114] pci 0000:00:1d.2: reg 0x20: [io  0xd480-0xd49f]

[    0.278222] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320

[    0.278252] pci 0000:00:1d.7: reg 0x10: [mem 0xff9fb000-0xff9fb3ff]

[    0.278316] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold

[    0.278400] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401

[    0.278535] pci 0000:00:1f.0: [8086:2810] type 00 class 0x060100

[    0.278620] pci 0000:00:1f.0: quirk: [io  0x0800-0x087f] claimed by 
ICH6 ACPI/GPIO/TCO

[    0.278625] pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by 
ICH6 GPIO

[    0.278629] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 
0a00 (mask 00ff)

[    0.278732] pci 0000:00:1f.2: [8086:2821] type 00 class 0x010601

[    0.278759] pci 0000:00:1f.2: reg 0x10: [io  0xe880-0xe887]

[    0.278766] pci 0000:00:1f.2: reg 0x14: [io  0xe800-0xe803]

[    0.278774] pci 0000:00:1f.2: reg 0x18: [io  0xe480-0xe487]

[    0.278782] pci 0000:00:1f.2: reg 0x1c: [io  0xe400-0xe403]

[    0.278789] pci 0000:00:1f.2: reg 0x20: [io  0xe080-0xe09f]

[    0.278797] pci 0000:00:1f.2: reg 0x24: [mem 0xff9fb800-0xff9fbfff]

[    0.278825] pci 0000:00:1f.2: PME# supported from D3hot

[    0.278907] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500

[    0.278920] pci 0000:00:1f.3: reg 0x10: [mem 0xff9fac00-0xff9facff]

[    0.278950] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]

[    0.279124] pci 0000:01:00.0: [11ab:4362] type 00 class 0x020000

[    0.279168] pci 0000:01:00.0: reg 0x10: [mem 0xff6fc000-0xff6fffff 64bit]

[    0.279180] pci 0000:01:00.0: reg 0x18: [io  0xb800-0xb8ff]

[    0.279221] pci 0000:01:00.0: reg 0x30: [mem 0xff6c0000-0xff6dffff pref]

[    0.279262] pci 0000:01:00.0: supports D1 D2

[    0.279264] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold

[    0.279317] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  
You can enable it with 'pcie_aspm=force'

[    0.279328] pci 0000:00:1c.0: PCI bridge to [bus 01]

[    0.279332] pci 0000:00:1c.0:   bridge window [io  0xb000-0xbfff]

[    0.279336] pci 0000:00:1c.0:   bridge window [mem 0xff600000-0xff6fffff]

[    0.279410] pci 0000:02:00.0: [11ab:4362] type 00 class 0x020000

[    0.279454] pci 0000:02:00.0: reg 0x10: [mem 0xff7fc000-0xff7fffff 64bit]

[    0.279466] pci 0000:02:00.0: reg 0x18: [io  0xc800-0xc8ff]

[    0.279506] pci 0000:02:00.0: reg 0x30: [mem 0xff7c0000-0xff7dffff pref]

[    0.279548] pci 0000:02:00.0: supports D1 D2

[    0.279550] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold

[    0.279599] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  
You can enable it with 'pcie_aspm=force'

[    0.279609] pci 0000:00:1c.1: PCI bridge to [bus 02]

[    0.279613] pci 0000:00:1c.1:   bridge window [io  0xc000-0xcfff]

[    0.279618] pci 0000:00:1c.1:   bridge window [mem 0xff700000-0xff7fffff]

[    0.279706] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)

[    0.279715] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 
window] (subtractive decode)

[    0.279718] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff 
window] (subtractive decode)

[    0.279720] pci 0000:00:1e.0:   bridge window [mem 
0x000a0000-0x000bffff window] (subtractive decode)

[    0.279723] pci 0000:00:1e.0:   bridge window [mem 
0x000d0000-0x000dffff window] (subtractive decode)

[    0.279725] pci 0000:00:1e.0:   bridge window [mem 
0xaff00000-0xffffffff window] (subtractive decode)

[    0.279740] pci_bus 0000:00: on NUMA node 0

[    0.280490] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 
14 15)

[    0.280545] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 
14 15)

[    0.280598] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 
*14 15)

[    0.280651] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 
14 15)

[    0.280713] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 
14 15) *0, disabled.

[    0.280766] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 
14 *15)

[    0.280819] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 
14 15)

[    0.280871] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 
14 15)

[    0.280925] ACPI: Enabled 2 GPEs in block 00 to 1F

[    0.281098] SCSI subsystem initialized

[    0.281130] libata version 3.00 loaded.

[    0.281137] ACPI: bus type USB registered

[    0.281175] usbcore: registered new interface driver usbfs

[    0.281190] usbcore: registered new interface driver hub

[    0.281211] usbcore: registered new device driver usb

[    0.281255] pps_core: LinuxPPS API ver. 1 registered

[    0.281256] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 
Rodolfo Giometti <giometti@linux.it>

[    0.281266] PTP clock support registered

[    0.281307] Advanced Linux Sound Architecture Driver Initialized.

[    0.281307] PCI: Using ACPI for IRQ routing

[    0.281307] PCI: pci_cache_line_size set to 64 bytes

[    0.281307] Expanded resource reserved due to conflict with PCI Bus 
0000:00

[    0.281307] e820: reserve RAM buffer [mem 0x0009cc00-0x0009ffff]

[    0.281307] e820: reserve RAM buffer [mem 0xafeb0000-0xafffffff]

[    0.281517] Bluetooth: Core ver 2.21

[    0.281534] NET: Registered protocol family 31

[    0.281536] Bluetooth: HCI device and connection manager initialized

[    0.281540] Bluetooth: HCI socket layer initialized

[    0.281543] Bluetooth: L2CAP socket layer initialized

[    0.281551] Bluetooth: SCO socket layer initialized

[    0.282186] clocksource: Switched to clocksource refined-jiffies

[    0.282299] FS-Cache: Loaded

[    0.282369] pnp: PnP ACPI init

[    0.282461] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved

[    0.282465] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)

[    0.282547] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)

[    0.282616] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b 
(active)

[    0.282829] pnp 00:03: [dma 0 disabled]

[    0.282903] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)

[    0.283151] pnp 00:04: [dma 0 disabled]

[    0.283244] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)

[    0.283542] system 00:05: [io 0x0a00-0x0a0f] has been reserved

[    0.283545] system 00:05: [io 0x0a10-0x0a1f] has been reserved

[    0.283548] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)

[    0.283692] system 00:06: [io 0x04d0-0x04d1] has been reserved

[    0.283695] system 00:06: [io 0x0800-0x087f] has been reserved

[    0.283698] system 00:06: [io 0x0480-0x04bf] has been reserved

[    0.283701] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved

[    0.283704] system 00:06: [mem 0xfed20000-0xfed8ffff] has been reserved

[    0.283707] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)

[    0.283832] system 00:07: [mem 0xffc00000-0xffefffff] has been reserved

[    0.283836] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)

[    0.283933] system 00:08: [mem 0xfec00000-0xfec00fff] could not be 
reserved

[    0.283936] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved

[    0.283939] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)

[    0.284038] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved

[    0.284042] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)

[    0.284235] system 00:0a: [mem 0x00000000-0x0009ffff] could not be 
reserved

[    0.284238] system 00:0a: [mem 0x000c0000-0x000cffff] could not be 
reserved

[    0.284241] system 00:0a: [mem 0x000e0000-0x000fffff] could not be 
reserved

[    0.284244] system 00:0a: [mem 0x00100000-0xafefffff] could not be 
reserved

[    0.284247] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)

[    0.284367] pnp: PnP ACPI: found 11 devices

[    0.292469] clocksource: acpi_pm: mask: 0xffffff max_cycles: 
0xffffff, max_idle_ns: 2085701024 ns

[    0.292493] clocksource: Switched to clocksource acpi_pm

[    0.292511] pci 0000:00:1c.0: bridge window [mem 
0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 
100000

[    0.292520] pci 0000:00:1c.1: bridge window [mem 
0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 
100000

[    0.292530] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit 
pref] res_to_dev_res add_size 200000 min_align 100000

[    0.292533] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x002fffff 64bit 
pref] res_to_dev_res add_size 200000 min_align 100000

[    0.292536] pci 0000:00:1c.1: res[9]=[mem 0x00100000-0x000fffff 64bit 
pref] res_to_dev_res add_size 200000 min_align 100000

[    0.292539] pci 0000:00:1c.1: res[9]=[mem 0x00100000-0x002fffff 64bit 
pref] res_to_dev_res add_size 200000 min_align 100000

[    0.292547] pci 0000:00:1c.0: BAR 9: assigned [mem 
0xb0000000-0xb01fffff 64bit pref]

[    0.292552] pci 0000:00:1c.1: BAR 9: assigned [mem 
0xb0200000-0xb03fffff 64bit pref]

[    0.292555] pci 0000:00:1c.0: PCI bridge to [bus 01]

[    0.292559] pci 0000:00:1c.0:   bridge window [io  0xb000-0xbfff]

[    0.292563] pci 0000:00:1c.0:   bridge window [mem 0xff600000-0xff6fffff]

[    0.292568] pci 0000:00:1c.0:   bridge window [mem 
0xb0000000-0xb01fffff 64bit pref]

[    0.292573] pci 0000:00:1c.1: PCI bridge to [bus 02]

[    0.292576] pci 0000:00:1c.1:   bridge window [io  0xc000-0xcfff]

[    0.292581] pci 0000:00:1c.1:   bridge window [mem 0xff700000-0xff7fffff]

[    0.292585] pci 0000:00:1c.1:   bridge window [mem 
0xb0200000-0xb03fffff 64bit pref]

[    0.292591] pci 0000:00:1e.0: PCI bridge to [bus 03]

[    0.292601] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]

[    0.292603] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]

[    0.292606] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff 
window]

[    0.292608] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff 
window]

[    0.292611] pci_bus 0000:00: resource 8 [mem 0xaff00000-0xffffffff 
window]

[    0.292613] pci_bus 0000:01: resource 0 [io  0xb000-0xbfff]

[    0.292616] pci_bus 0000:01: resource 1 [mem 0xff600000-0xff6fffff]

[    0.292618] pci_bus 0000:01: resource 2 [mem 0xb0000000-0xb01fffff 
64bit pref]

[    0.292620] pci_bus 0000:02: resource 0 [io  0xc000-0xcfff]

[    0.292623] pci_bus 0000:02: resource 1 [mem 0xff700000-0xff7fffff]

[    0.292625] pci_bus 0000:02: resource 2 [mem 0xb0200000-0xb03fffff 
64bit pref]

[    0.292628] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7 window]

[    0.292630] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff window]

[    0.292632] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff 
window]

[    0.292635] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff 
window]

[    0.292637] pci_bus 0000:03: resource 8 [mem 0xaff00000-0xffffffff 
window]

[    0.292667] NET: Registered protocol family 2

[    0.292840] TCP established hash table entries: 65536 (order: 7, 
524288 bytes)

[    0.292996] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)

[    0.292996] TCP: Hash tables configured (established 65536 bind 65536)

[    0.292996] UDP hash table entries: 4096 (order: 5, 131072 bytes)

[    0.292996] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)

[    0.292996] NET: Registered protocol family 1

[    0.293156] RPC: Registered named UNIX socket transport module.

[    0.293158] RPC: Registered udp transport module.

[    0.293159] RPC: Registered tcp transport module.

[    0.293160] RPC: Registered tcp NFSv4.1 backchannel transport module.

[    0.293173] pci 0000:00:02.0: Video device with shadowed ROM

[    1.393031] pci 0000:00:1a.7: EHCI: BIOS handoff failed (BIOS bug?) 
01010001

[    1.393628] PCI: CLS 32 bytes, default 64

[    1.393679] Unpacking initramfs...

[    2.059003] Freeing initrd memory: 4484K

[    2.059042] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)

[    2.059045] software IO TLB: mapped [mem 0xabeb0000-0xafeb0000] (64MB)

[    2.060866] audit: initializing netlink subsys (disabled)

[    2.060882] audit: type=2000 audit(1656560745.059:1): initialized

[    2.069056] VFS: Disk quotas dquot_6.6.0

[    2.069111] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 
bytes)

[    2.078991] NFS: Registering the id_resolver key type

[    2.079000] Key type id_resolver registered

[    2.079039] Key type id_legacy registered

[    2.079044] Installing knfsd (copyright (C) 1996okir@monad.swb.de).

[    2.082125] Key type cifs.spnego registered

[    2.082132] Key type cifs.idmap registered

[    2.082186] fuse init (API version 7.23)

[    2.084994] NET: Registered protocol family 38

[    2.085013] async_tx: api initialized (async)

[    2.085146] Block layer SCSI generic (bsg) driver version 0.4 loaded 
(major 251)

[    2.085216] io scheduler noop registered

[    2.085221] io scheduler deadline registered

[    2.085290] io scheduler cfq registered (default)

[    2.085374] io scheduler bfq registered

[    2.085376] BFQ I/O-scheduler: v7r11

[    2.085432] gpio_it87: no device

[    2.089082] intel_idle: does not run on family 6 model 15

[    2.089186] input: Power Button as 
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0

[    2.089190] ACPI: Power Button [PWRB]

[    2.089249] input: Power Button as 
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1

[    2.089252] ACPI: Power Button [PWRF]

[    2.089534] ioatdma: Intel(R) QuickData Technology Driver 4.00

[    2.089655] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled

[    2.110208] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) 
is a 16550A

[    2.130803] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) 
is a 16550A

[    2.131235] Linux agpgart interface v0.103

[    2.131278] agpgart-intel 0000:00:00.0: Intel 965Q Chipset

[    2.131297] agpgart-intel 0000:00:00.0: detected gtt size: 524288K 
total, 262144K mappable

[    2.132491] agpgart-intel 0000:00:00.0: detected 1024K stolen memory

[    2.132612] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000

[    2.132686] [drm] Initialized drm 1.1.0 20060810

[    2.133252] [drm] Memory usable by graphics device = 512M

[    2.133255] [drm] Replacing VGA console driver

[    2.133961] Console: switching to colour dummy device 80x25

[    2.134000] pmd_set_huge: Cannot satisfy [mem 0xd0000000-0xd0200000] 
with a huge-page mapping due to MTRR override.

[    2.140246] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).

[    2.140247] [drm] Driver supports precise vblank timestamp query.

[    2.148755] [drm] initialized overlay support

[    2.148812] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on 
minor 0

[    2.152183] loop: module loaded

[    2.152451] gpio_ich: GPIO from 462 to 511 on gpio_ich

[    2.152569] mpt3sas version 12.100.00.00 loaded

[    2.154374] ahci 0000:00:1f.2: version 3.0

[    2.154564] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled

[    2.154596] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 
0x3f impl SATA mode

[    2.154600] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo 
pio slum part ccc ems sxs

[    2.154644] do_marvell_9170_recover: ignoring PCI device (8086:2821) 
at PCI#0

[    2.154685] do_marvell_9170_recover: ignoring PCI device (8086:2821) 
at PCI#0

[    2.156066] do_marvell_9170_recover: ignoring PCI device (8086:2821) 
at PCI#0

[    2.158079] do_marvell_9170_recover: ignoring PCI device (8086:2821) 
at PCI#0

[    2.160076] do_marvell_9170_recover: ignoring PCI device (8086:2821) 
at PCI#0

[    2.162081] do_marvell_9170_recover: ignoring PCI device (8086:2821) 
at PCI#0

[    2.167109] scsi host0: ahci

[    2.167359] scsi host1: ahci

[    2.168197] scsi host2: ahci

[    2.168304] scsi host3: ahci

[    2.169170] scsi host4: ahci

[    2.169281] scsi host5: ahci

[    2.169346] ata1: SATA max UDMA/133 abar m2048@0xff9fb800 port 
0xff9fb900 irq 25

[    2.169348] ata2: SATA max UDMA/133 abar m2048@0xff9fb800 port 
0xff9fb980 irq 25

[    2.169351] ata3: SATA max UDMA/133 abar m2048@0xff9fb800 port 
0xff9fba00 irq 25

[    2.169353] ata4: SATA max UDMA/133 abar m2048@0xff9fb800 port 
0xff9fba80 irq 25

[    2.169355] ata5: SATA max UDMA/133 abar m2048@0xff9fb800 port 
0xff9fbb00 irq 25

[    2.169358] ata6: SATA max UDMA/133 abar m2048@0xff9fb800 port 
0xff9fbb80 irq 25

[    2.169572] Rounding down aligned max_sectors from 4294967295 to 
4294967288

[    2.169676] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)

[    2.169699] tun: Universal TUN/TAP device driver, 1.6

[    2.169700] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>

[    2.169756] e1000: Intel(R) PRO/1000 Network Driver - version 
7.3.21-k8-NAPI

[    2.169758] e1000: Copyright (c) 1999-2006 Intel Corporation.

[    2.169779] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k

[    2.169781] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.

[    2.169804] igb: Intel(R) Gigabit Ethernet Network Driver - version 
5.3.0-k

[    2.169806] igb: Copyright (c) 2007-2014 Intel Corporation.

[    2.169825] Intel(R) 10GbE PCI Express Linux Network Driver - version 
5.3.8

[    2.169827] Copyright(c) 1999 - 2018 Intel Corporation.

[    2.169874] i40e: Intel(R) 40-10 Gigabit Ethernet Connection Network 
Driver - version 2.4.10

[    2.169876] i40e: Copyright(c) 2013 - 2018 Intel Corporation.

[    2.169922] bnx2x: QLogic 5771x/578xx 10/20-Gigabit Ethernet Driver 
bnx2x 1.712.30-0 (2014/02/10)

[    2.170073] sk98lin: Network Device Driver v10.93.3.3

(C)Copyright 1999-2012 Marvell(R).

[    2.224898] eth0: Marvell Yukon 88E8053 Gigabit Ethernet Controller

[    2.279721] eth1: Marvell Yukon 88E8053 Gigabit Ethernet Controller

[    2.279746] Fusion MPT base driver 3.04.20

[    2.279747] Copyright (c) 1999-2008 LSI Corporation

[    2.279755] Fusion MPT SAS Host driver 3.04.20

[    2.279781] Fusion MPT misc device (ioctl) driver 3.04.20

[    2.279829] mptctl: Registered with Fusion MPT base driver

[    2.279831] mptctl: /dev/mptctl @ (major,minor=10,220)

[    2.279835] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[    2.279841] ehci-pci: EHCI PCI platform driver

[    2.279946] ehci-pci 0000:00:1a.7: EHCI Host Controller

[    2.279954] ehci-pci 0000:00:1a.7: new USB bus registered, assigned 
bus number 1

[    2.279966] ehci-pci 0000:00:1a.7: debug port 1

[    2.283872] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported

[    2.283885] ehci-pci 0000:00:1a.7: irq 18, io mem 0xff9fb400

[    2.289048] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00

[    2.289291] hub 1-0:1.0: USB hub found

[    2.289303] hub 1-0:1.0: 4 ports detected

[    2.289515] ehci-pci 0000:00:1d.7: EHCI Host Controller

[    2.289521] ehci-pci 0000:00:1d.7: new USB bus registered, assigned 
bus number 2

[    2.289531] ehci-pci 0000:00:1d.7: debug port 1

[    2.293424] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported

[    2.293436] ehci-pci 0000:00:1d.7: irq 23, io mem 0xff9fb000

[    2.299045] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00

[    2.299286] hub 2-0:1.0: USB hub found

[    2.299295] hub 2-0:1.0: 6 ports detected

[    2.299460] uhci_hcd: USB Universal Host Controller Interface driver

[    2.299543] uhci_hcd 0000:00:1a.0: UHCI Host Controller

[    2.299550] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned 
bus number 3

[    2.299556] uhci_hcd 0000:00:1a.0: detected 2 ports

[    2.299581] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e000

[    2.299774] hub 3-0:1.0: USB hub found

[    2.299797] hub 3-0:1.0: 2 ports detected

[    2.299951] uhci_hcd 0000:00:1a.1: UHCI Host Controller

[    2.299958] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned 
bus number 4

[    2.299964] uhci_hcd 0000:00:1a.1: detected 2 ports

[    2.299987] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000dc00

[    2.300183] hub 4-0:1.0: USB hub found

[    2.300208] hub 4-0:1.0: 2 ports detected

[    2.300388] uhci_hcd 0000:00:1d.0: UHCI Host Controller

[    2.300395] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned 
bus number 5

[    2.300401] uhci_hcd 0000:00:1d.0: detected 2 ports

[    2.300418] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d880

[    2.300584] hub 5-0:1.0: USB hub found

[    2.300607] hub 5-0:1.0: 2 ports detected

[    2.300751] uhci_hcd 0000:00:1d.1: UHCI Host Controller

[    2.300758] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned 
bus number 6

[    2.300764] uhci_hcd 0000:00:1d.1: detected 2 ports

[    2.300787] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d800

[    2.300975] hub 6-0:1.0: USB hub found

[    2.301018] hub 6-0:1.0: 2 ports detected

[    2.301173] uhci_hcd 0000:00:1d.2: UHCI Host Controller

[    2.301180] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned 
bus number 7

[    2.301186] uhci_hcd 0000:00:1d.2: detected 2 ports

[    2.301204] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d480

[    2.301385] hub 7-0:1.0: USB hub found

[    2.301413] hub 7-0:1.0: 2 ports detected

[    2.301584] usbcore: registered new interface driver cdc_acm

[    2.301586] cdc_acm: USB Abstract Control Model driver for USB modems 
and ISDN adapters

[    2.301607] usbcore: registered new interface driver usblp

[    2.301643] usbcore: registered new interface driver usb-storage

[    2.301691] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1

[    2.301693] i8042: PNP: PS/2 appears to have AUX port disabled, if 
this is incorrect please boot with i8042.nopnp

[    2.302419] serio: i8042 KBD port at 0x60,0x64 irq 1

[    2.303448] rtc_cmos 00:01: RTC can wake from S4

[    2.303609] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0

[    2.303630] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram

[    2.303644] i2c /dev entries driver

[    2.304042] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt

[    2.306134] coretemp coretemp.0: Using relative temperature scale!

[    2.306150] coretemp coretemp.0: Using relative temperature scale!

[    2.306163] coretemp coretemp.0: Using relative temperature scale!

[    2.306178] coretemp coretemp.0: Using relative temperature scale!

[    2.306289] w83627ehf: Found W83627DHG chip at 0xa10

[    2.306670] md: raid0 personality registered for level 0

[    2.306674] md: raid1 personality registered for level 1

[    2.306677] md: raid10 personality registered for level 10

[    2.309405] md: raid6 personality registered for level 6

[    2.309409] md: raid5 personality registered for level 5

[    2.309411] md: raid4 personality registered for level 4

[    2.309604] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) 
initialised:dm-devel@redhat.com

[    2.310108] usbcore: registered new interface driver btusb

[    2.310189] usbcore: registered new interface driver usbhid

[    2.310190] usbhid: USB HID core driver

[    2.310452] ip_tables: (C) 2000-2006 Netfilter Core Team

[    2.310829] NET: Registered protocol family 10

[    2.311209] NET: Registered protocol family 17

[    2.311233] 8021q: 802.1Q VLAN Support v1.8

[    2.311248] Key type dns_resolver registered

[    2.311447] readynas_io_init: initializing ReadyNAS I/O.

[    2.311449] procfs_init: initializing ReadyNAS procfs.

[    2.311455] ReadyNAS model: To Be Filled By O.E.M.

[    2.311483] pwr_button_state_init: initializing ReadyNAS PWR button 
state handler .

[    2.311489] button_init: initializing ReadyNAS button set.

[    2.311492] __button_init: button 'backup' gpio_ich:15 (POLL)

[    2.311502] __button_init: button 'reset' gpio_ich:8 (POLL)

[    2.312880] input: rn_button as /devices/virtual/input/input3

[    2.312938] readynas_io_init: initialization successfully completed.

[    2.313019] readynas_lcd_init: installing ReadyNAS LCD driver.

[    2.313087] readynas_led_init: installing ReadyNAS LED driver.

[    2.314957] register_led: registering LED "readynas:green:backup"

[    2.315213] microcode: CPU0 sig=0x6fb, pf=0x10, revision=0xb6

[    2.315222] microcode: CPU1 sig=0x6fb, pf=0x10, revision=0xb6

[    2.315231] microcode: CPU2 sig=0x6fb, pf=0x10, revision=0xb6

[    2.315239] microcode: CPU3 sig=0x6fb, pf=0x10, revision=0xb6

[    2.315305] microcode: Microcode Update Driver: v2.01 
<tigran@aivazian.fsnet.co.uk>, Peter Oruba

[    2.315516] registered taskstats version 1

[    2.318139] Btrfs loaded, crc32c=crc32c-generic

[    2.319040] hdaudio hdaudioC0D0: Unable to bind the codec

[    2.324456] rtc_cmos 00:01: setting system clock to 2022-06-30 
03:45:45 UTC (1656560745)

[    2.324599] ALSA device list:

[    2.324602]   No soundcards found.

[    2.474033] do_marvell_9170_recover: ignoring PCI device (8086:2821) 
at PCI#0

[    2.474044] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[    2.474590] ata1.00: ATA-9: WDC WD30EFRX-68EUZN0, 80.00A80, max UDMA/133

[    2.474594] ata1.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 
31/32), AA

[    2.475220] ata1.00: configured for UDMA/133

[    2.475452] scsi 0:0:0:0: Direct-Access     ATA      WDC WD30EFRX-68E 
0A80 PQ: 0 ANSI: 5

[    2.475760] sd 0:0:0:0: [sda] 5860533168 512-byte logical blocks: 
(3.00 TB/2.73 TiB)

[    2.475763] sd 0:0:0:0: [sda] 4096-byte physical blocks

[    2.475815] sd 0:0:0:0: [sda] Write Protect is off

[    2.475819] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00

[    2.475841] sd 0:0:0:0: [sda] Write cache: enabled, read cache: 
enabled, doesn't support DPO or FUA

[    2.476084] sd 0:0:0:0: Attached scsi generic sg0 type 0

[    2.522051]  sda: sda1 sda2 sda3

[    2.522379] sd 0:0:0:0: [sda] Attached SCSI disk

[    2.601041] usb 2-1: new high-speed USB device number 2 using ehci-pci

[    2.717033] usb-storage 2-1:1.0: USB Mass Storage device detected

[    2.717115] usb-storage 2-1:1.0: Quirks match for vid 090c pid 1000: 400

[    2.717139] scsi host6: usb-storage 2-1:1.0

[    2.781032] do_marvell_9170_recover: ignoring PCI device (8086:2821) 
at PCI#0

[    2.781042] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[    2.795031] ata2.00: ATA-11: ST4000NE001-2MA101, EN01, max UDMA/133

[    2.795035] ata2.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 
31/32), AA

[    2.808741] ata2.00: configured for UDMA/133

[    2.808933] scsi 1:0:0:0: Direct-Access     ATA      ST4000NE001-2MA1 
EN01 PQ: 0 ANSI: 5

[    2.809213] sd 1:0:0:0: [sdb] 7814037168 512-byte logical blocks: 
(4.00 TB/3.64 TiB)

[    2.809216] sd 1:0:0:0: [sdb] 4096-byte physical blocks

[    2.809267] sd 1:0:0:0: [sdb] Write Protect is off

[    2.809270] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00

[    2.809292] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: 
enabled, doesn't support DPO or FUA

[    2.809375] sd 1:0:0:0: Attached scsi generic sg1 type 0

[    2.847249]  sdb: sdb1 sdb2 sdb3 sdb4

[    2.847649] sd 1:0:0:0: [sdb] Attached SCSI disk

[    3.061040] tsc: Refined TSC clocksource calibration: 2659.998 MHz

[    3.061046] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 
0x2657a1d9103, max_idle_ns: 440795229008 ns

[    3.114032] do_marvell_9170_recover: ignoring PCI device (8086:2821) 
at PCI#0

[    3.114043] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[    3.128035] ata3.00: ATA-11: ST4000NE001-2MA101, EN01, max UDMA/133

[    3.128040] ata3.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 
31/32), AA

[    3.141737] ata3.00: configured for UDMA/133

[    3.141929] scsi 2:0:0:0: Direct-Access     ATA      ST4000NE001-2MA1 
EN01 PQ: 0 ANSI: 5

[    3.142203] sd 2:0:0:0: [sdc] 7814037168 512-byte logical blocks: 
(4.00 TB/3.64 TiB)

[    3.142207] sd 2:0:0:0: [sdc] 4096-byte physical blocks

[    3.142258] sd 2:0:0:0: [sdc] Write Protect is off

[    3.142261] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00

[    3.142284] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: 
enabled, doesn't support DPO or FUA

[    3.142475] sd 2:0:0:0: Attached scsi generic sg2 type 0

[    3.185724]  sdc: sdc1 sdc2 sdc3 sdc4

[    3.186153] sd 2:0:0:0: [sdc] Attached SCSI disk

[    3.394037] usb 6-1: new full-speed USB device number 2 using uhci_hcd

[    3.447032] do_marvell_9170_recover: ignoring PCI device (8086:2821) 
at PCI#0

[    3.447043] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[    3.447587] ata4.00: ATA-10: WDC WD40EFRX-68N32N0, 82.00A82, max UDMA/133

[    3.447591] ata4.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 
31/32), AA

[    3.448159] ata4.00: configured for UDMA/133

[    3.448410] scsi 3:0:0:0: Direct-Access     ATA      WDC WD40EFRX-68N 
0A82 PQ: 0 ANSI: 5

[    3.448789] sd 3:0:0:0: [sdd] 7814037168 512-byte logical blocks: 
(4.00 TB/3.64 TiB)

[    3.448792] sd 3:0:0:0: [sdd] 4096-byte physical blocks

[    3.448847] sd 3:0:0:0: [sdd] Write Protect is off

[    3.448850] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00

[    3.448873] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: 
enabled, doesn't support DPO or FUA

[    3.449186] sd 3:0:0:0: Attached scsi generic sg3 type 0

[    3.493627]  sdd: sdd1 sdd2 sdd3 sdd4

[    3.494094] sd 3:0:0:0: [sdd] Attached SCSI disk

[    3.754033] do_marvell_9170_recover: ignoring PCI device (8086:2821) 
at PCI#0

[    3.754044] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[    3.754592] ata5.00: ATA-10: WDC WD40EFRX-68N32N0, 82.00A82, max UDMA/133

[    3.754597] ata5.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 
31/32), AA

[    3.755175] ata5.00: configured for UDMA/133

[    3.755334] scsi 4:0:0:0: Direct-Access     ATA      WDC WD40EFRX-68N 
0A82 PQ: 0 ANSI: 5

[    3.755709] sd 4:0:0:0: [sde] 7814037168 512-byte logical blocks: 
(4.00 TB/3.64 TiB)

[    3.755712] sd 4:0:0:0: [sde] 4096-byte physical blocks

[    3.755764] sd 4:0:0:0: [sde] Write Protect is off

[    3.755767] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00

[    3.755790] sd 4:0:0:0: [sde] Write cache: enabled, read cache: 
enabled, doesn't support DPO or FUA

[    3.756074] sd 4:0:0:0: Attached scsi generic sg4 type 0

[    3.794711]  sde: sde1 sde2 sde3 sde4

[    3.795199] sd 4:0:0:0: [sde] Attached SCSI disk

[    3.834190] hid-generic 0003:051D:0002.0001: hiddev0: USB HID v1.00 
Device [American Power Conversion Back-UPS RS 1500MS FW:952.e3 .D USB 
FW:e3     ] on usb-0000:00:1d.1-1/input0

[    4.061032] do_marvell_9170_recover: ignoring PCI device (8086:2821) 
at PCI#0

[    4.061044] ata6: SATA link down (SStatus 0 SControl 300)

[    4.061652] Freeing unused kernel memory: 872K

[    4.061670] clocksource: Switched to clocksource tsc

[    4.064542] vpd: loading out-of-tree module taints kernel.

[    4.064547] vpd: module license 'Proprietary' taints kernel.

[    4.064549] Disabling lock debugging due to kernel taint

[    4.064661] ReadyNAS VPD init

[    7.631092] nv6lcd v3.1 loaded.

[    7.727886] scsi 6:0:0:0: Direct-Access     SMI      USB DISK         
1100 PQ: 0 ANSI: 0 CCS

[    7.728297] sd 6:0:0:0: Attached scsi generic sg5 type 0

[    7.728300] sd 6:0:0:0: Embedded Enclosure Device

[    7.729368] sd 6:0:0:0: Wrong diagnostic page; asked for 1 got 0

[    7.729747] sd 6:0:0:0: [sdf] 250880 512-byte logical blocks: (128 
MB/123 MiB)

[    7.730615] sd 6:0:0:0: [sdf] Write Protect is off

[    7.730617] sd 6:0:0:0: [sdf] Mode Sense: 43 00 00 00

[    7.731489] sd 6:0:0:0: [sdf] No Caching mode page found

[    7.731490] sd 6:0:0:0: [sdf] Assuming drive cache: write through

[    7.735123]  sdf: sdf1

[    7.737365] sd 6:0:0:0: [sdf] Attached SCSI removable disk

[    7.746853] sd 6:0:0:0: Failed to get diagnostic page 0xffffffea

[    7.752858] sd 6:0:0:0: Failed to bind enclosure -19

[   20.336052] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

[   20.338949] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready

[   21.359543] random: nonblocking pool is initialized

[   22.700903] eth1: network connection up using port A

[   22.700903]     interrupt src:   MSI

[   22.700903]     speed:           1000

[   22.700903]     autonegotiation: yes

[   22.700903]     duplex mode:     full

[   22.700903]     flowctrl:        none

[   22.700903]     role:            slave

[   22.700903]     tcp offload: enabled

[   22.700903]     scatter-gather: enabled

[   22.700903]     tx-checksum: enabled

[   22.700903]     rx-checksum: enabled

[   22.700903]     rx-polling: enabled

[   22.700903] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready

[   22.789894] eth0: network connection up using port A

[   22.789894]     interrupt src:   MSI

[   22.789894]     speed:           1000

[   22.789894]     autonegotiation: yes

[   22.789894]     duplex mode:     full

[   22.789894]     flowctrl:        none

[   22.789894]     role:            slave

[   22.789894]     tcp offload: enabled

[   22.789894]     scatter-gather: enabled

[   22.789894]     tx-checksum: enabled

[   22.789894]     rx-checksum: enabled

[   22.789894]     rx-polling: enabled

[   22.789894] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

[   29.469809] md: md0 stopped.

[   29.470692] md: bind<sdb1>

[   29.470859] md: bind<sdc1>

[   29.470997] md: bind<sdd1>

[   29.471172] md: bind<sde1>

[   29.471295] md: bind<sda1>

[   29.473870] md/raid1:md0: active with 5 out of 5 mirrors

[   29.473956] md0: detected capacity change from 0 to 4290772992

[   29.489973] md: md1 stopped.

[   29.490924] md: bind<sdc2>

[   29.491113] md: bind<sdd2>

[   29.491258] md: bind<sde2>

[   29.491440] md: bind<sdb2>

[   29.491580] md: bind<sda2>

[   29.492180] md/raid10:md1: active with 5 out of 5 devices

[   29.492275] md1: detected capacity change from 0 to 1336934400

[   29.902166] BTRFS: device label 33ea130b:root devid 1 transid 1525025 
/dev/md0

[   29.902551] BTRFS info (device md0): has skinny extents

[   30.813394] systemd[1]: Failed to insert module 'kdbus': Function not 
implemented

[   30.816561] systemd[1]: systemd 230 running in system mode. (+PAM 
+AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP 
+GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)

[   30.816755] systemd[1]: Detected architecture x86-64.

[   30.821162] systemd[1]: Set hostname to <nas>.

[   30.961126] systemd[1]: systemd-journald-audit.socket: Cannot add 
dependency job, ignoring: Unit systemd-journald-audit.socket is masked.

[   30.961195] systemd[1]: systemd-journald-audit.socket: Cannot add 
dependency job, ignoring: Unit systemd-journald-audit.socket is masked.

[   30.961958] systemd[1]: Set up automount Arbitrary Executable File 
Formats File System Automount Point.

[   30.972146] systemd[1]: Created slice User and Session Slice.

[   30.978124] systemd[1]: Listening on Journal Socket (/dev/log).

[   30.984114] systemd[1]: Listening on udev Control Socket.

[   30.990121] systemd[1]: Created slice System Slice.

[   30.996083] systemd[1]: Reached target Slices.

[   31.000064] systemd[1]: Reached target Remote File Systems (Pre).

[   31.006129] systemd[1]: Created slice system-getty.slice.

[   31.012137] systemd[1]: Started Forward Password Requests to Wall 
Directory Watch.

[   31.021113] systemd[1]: Listening on /dev/initctl Compatibility Named 
Pipe.

[   31.028127] systemd[1]: Listening on Journal Socket.

[   31.039179] systemd[1]: Starting Create Static Device Nodes in /dev...

[   31.045658] systemd[1]: Starting Journal Service...

[   31.050823] systemd[1]: Starting Load Kernel Modules...

[   31.055736] systemd[1]: Mounting POSIX Message Queue File System...

[   31.061761] systemd[1]: Started ReadyNAS LCD splasher.

[   31.067831] systemd[1]: Starting ReadyNASOS system prep...

[   31.072107] systemd[1]: Reached target Remote File Systems.

[   31.078136] systemd[1]: Listening on udev Kernel Socket.

[   31.084181] systemd[1]: Created slice system-serial\x2dgetty.slice.

[   31.099501] systemd[1]: Mounting Debug File System...

[   31.104203] systemd[1]: Reached target Encrypted Volumes.

[   31.111731] systemd[1]: Starting Remount Root and Kernel File Systems...

[   31.118206] systemd[1]: Started Dispatch Password Requests to Console 
Directory Watch.

[   31.127120] systemd[1]: Reached target Paths.

[   31.141394] systemd[1]: Mounted Debug File System.

[   31.146116] systemd[1]: Mounted POSIX Message Queue File System.

[   31.152322] systemd[1]: Started Load Kernel Modules.

[   31.158382] systemd[1]: Started Create Static Device Nodes in /dev.

[   31.165420] systemd[1]: Started ReadyNASOS system prep.

[   31.171379] systemd[1]: Started Remount Root and Kernel File Systems.

[   31.185199] systemd[1]: Starting Load/Save Random Seed...

[   31.190782] systemd[1]: Starting Rebuild Hardware Database...

[   31.197725] systemd[1]: Starting udev Kernel Device Manager...

[   31.203724] systemd[1]: Starting Apply Kernel Variables...

[   31.208719] systemd[1]: Mounting FUSE Control File System...

[   31.213707] systemd[1]: Mounting Configuration File System...

[   31.219475] systemd[1]: Mounted FUSE Control File System.

[   31.225160] systemd[1]: Mounted Configuration File System.

[   31.231339] systemd[1]: Started Load/Save Random Seed.

[   31.238326] systemd[1]: Started Apply Kernel Variables.

[   31.306716] systemd[1]: Started udev Kernel Device Manager.

[   31.322191] systemd[1]: Starting MD arrays...

[   31.487875] systemd[1]: Started Journal Service.

[   31.520876] systemd-journald[1420]: Received request to flush runtime 
journal from PID 1

[   32.202932] md: md127 stopped.

[   32.203990] md: bind<sdb3>

[   32.204155] md: bind<sdc3>

[   32.204286] md: bind<sdd3>

[   32.204422] md: bind<sde3>

[   32.204560] md: bind<sda3>

[   32.217830] md/raid:md127: device sda3 operational as raid disk 0

[   32.217835] md/raid:md127: device sde3 operational as raid disk 4

[   32.217838] md/raid:md127: device sdd3 operational as raid disk 3

[   32.217841] md/raid:md127: device sdc3 operational as raid disk 2

[   32.217844] md/raid:md127: device sdb3 operational as raid disk 1

[   32.218402] md/raid:md127: allocated 5418kB

[   32.218445] md/raid:md127: raid level 5 active with 5 out of 5 
devices, algorithm 2

[   32.218449] RAID conf printout:

[   32.218451]  --- level:5 rd:5 wd:5

[   32.218454]  disk 0, o:1, dev:sda3

[   32.218457]  disk 1, o:1, dev:sdb3

[   32.218460]  disk 2, o:1, dev:sdc3

[   32.218463]  disk 3, o:1, dev:sdd3

[   32.218471]  disk 4, o:1, dev:sde3

[   32.218580] md127: detected capacity change from 0 to 11982507343872

[   32.390150] Adding 1305596k swap on /dev/md1.  Priority:-1 extents:1 
across:1305596k

[   32.568400] BTRFS: device label 33ea130b:data devid 1 transid 3240438 
/dev/md127

[   32.795849] md: md126 stopped.

[   32.796664] md: bind<sde4>

[   32.796784] md: bind<sdc4>

[   32.796900] md: bind<sdb4>

[   32.797136] md: bind<sdd4>

[   32.797897] md/raid:md126: device sdd4 operational as raid disk 0

[   32.797901] md/raid:md126: device sdb4 operational as raid disk 3

[   32.797903] md/raid:md126: device sdc4 operational as raid disk 2

[   32.797904] md/raid:md126: device sde4 operational as raid disk 1

[   32.798455] md/raid:md126: allocated 4362kB

[   32.798760] md/raid:md126: raid level 5 active with 4 out of 4 
devices, algorithm 2

[   32.798762] RAID conf printout:

[   32.798764]  --- level:5 rd:4 wd:4

[   32.798765]  disk 0, o:1, dev:sdd4

[   32.798767]  disk 1, o:1, dev:sde4

[   32.798769]  disk 2, o:1, dev:sdc4

[   32.798771]  disk 3, o:1, dev:sdb4

[   32.798854] md126: detected capacity change from 0 to 3000179490816

[   32.905771] BTRFS: device label 33ea130b:data devid 2 transid 3240438 
/dev/md126

[   33.189453] BTRFS info (device md126): has skinny extents

[   35.277853] BTRFS critical (device md126): corrupt node: root=1 
block=13404298215424 slot=307, unaligned pointer, have 
12567101254720864896 should be aligned to 4096

[   35.298299] BTRFS critical (device md126): corrupt node: root=1 
block=13404298215424 slot=307, unaligned pointer, have 
12567101254720864896 should be aligned to 4096

[   35.298341] BTRFS error (device md126): failed to read block groups: -5

[   35.299177] BTRFS error (device md126): failed to read block groups: -17

[   35.379488] BTRFS error (device md126): failed to read block groups: -17

[   35.445317] BTRFS error (device md126): failed to read block groups: -17

[   35.708498] BTRFS error (device md126): failed to read block groups: -17

[   35.729143] BTRFS error (device md126): open_ctree failed

[   36.067098] bonding: bond0 is being created...

[   36.072256] IPv6: ADDRCONF(NETDEV_UP): bond0: link is not ready

[   36.072260] 8021q: adding VLAN 0 to HW filter on device bond0

[   36.072653] bond0: Setting min links value to 1

[   36.072744] bond0: Setting MII monitoring interval to 100

[   36.072788] bond0: Setting xmit hash policy to layer2 (0)

[   36.075361] eth0: network connection down

[   36.078790] bond0: Adding slave eth0

[   36.082048] bond0: Enslaving eth0 as a backup interface with a down link

[   36.095452] eth1: network connection down

[   36.100443] bond0: Adding slave eth1

[   36.103517] bond0: Enslaving eth1 as a backup interface with a down link

[   36.103741] IPv6: ADDRCONF(NETDEV_UP): bond0: link is not ready

[   36.103744] 8021q: adding VLAN 0 to HW filter on device bond0

[   36.104163] IPv6: ADDRCONF(NETDEV_UP): bond0: link is not ready

[   36.104165] 8021q: adding VLAN 0 to HW filter on device bond0

[   39.250788] eth0: network connection up using port A

[   39.250788]     interrupt src:   MSI

[   39.250788]     speed:           1000

[   39.250788]     autonegotiation: yes

[   39.250788]     duplex mode:     full

[   39.250788]     flowctrl:        none

[   39.250788]     role:            slave

[   39.250788]     tcp offload: enabled

[   39.250788]     scatter-gather: enabled

[   39.250788]     tx-checksum: enabled

[   39.250788]     rx-checksum: enabled

[   39.250788]     rx-polling: enabled

[   39.310027] bond0: link status definitely up for interface eth0, 1000 
Mbps full duplex

[   39.310036] bond0: now running without any active interface!

[   39.310166] IPv6: ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready

[   39.377955] eth1: network connection up using port A

[   39.377955]     interrupt src:   MSI

[   39.377955]     speed:           1000

[   39.377955]     autonegotiation: yes

[   39.377955]     duplex mode:     full

[   39.377955]     flowctrl:        none

[   39.377955]     role:            slave

[   39.377955]     tcp offload: enabled

[   39.377955]     scatter-gather: enabled

[   39.377955]     tx-checksum: enabled

[   39.377955]     rx-checksum: enabled

[   39.377955]     rx-polling: enabled

[   39.410041] bond0: link status definitely up for interface eth1, 1000 
Mbps full duplex

^ permalink raw reply	[flat|nested] 14+ messages in thread