* [PATCH v1 0/1] Mediatek PMIC patch @ 2022-03-29 11:58 ` Zhiyong Tao 0 siblings, 0 replies; 11+ messages in thread From: Zhiyong Tao @ 2022-03-29 11:58 UTC (permalink / raw) To: lee.jones, robh+dt, matthias.bgg, lgirdwood, broonie, eddie.huang, a.zummo, alexandre.belloni, fshao Cc: srv_heupstream, hui.liu, zhiyong.tao, hsin-hsiung.wang, sean.wang, macpaul.lin, wen.su, devicetree, linux-kernel, linux-rtc, Project_Global_Chrome_Upstream_Group, linux-arm-kernel, linux-mediatek This patch fix pwrap time out issue. Zhiyong.Tao (1): pwrap: mediatek: fix wait time out issue drivers/soc/mediatek/mtk-pmic-wrap.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) mode change 100644 => 100755 drivers/soc/mediatek/mtk-pmic-wrap.c -- 2.18.0 ^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v1 0/1] Mediatek PMIC patch @ 2022-03-29 11:58 ` Zhiyong Tao 0 siblings, 0 replies; 11+ messages in thread From: Zhiyong Tao @ 2022-03-29 11:58 UTC (permalink / raw) To: lee.jones, robh+dt, matthias.bgg, lgirdwood, broonie, eddie.huang, a.zummo, alexandre.belloni, fshao Cc: srv_heupstream, hui.liu, zhiyong.tao, hsin-hsiung.wang, sean.wang, macpaul.lin, wen.su, devicetree, linux-kernel, linux-rtc, Project_Global_Chrome_Upstream_Group, linux-arm-kernel, linux-mediatek This patch fix pwrap time out issue. Zhiyong.Tao (1): pwrap: mediatek: fix wait time out issue drivers/soc/mediatek/mtk-pmic-wrap.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) mode change 100644 => 100755 drivers/soc/mediatek/mtk-pmic-wrap.c -- 2.18.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v1 0/1] Mediatek PMIC patch @ 2022-03-29 11:58 ` Zhiyong Tao 0 siblings, 0 replies; 11+ messages in thread From: Zhiyong Tao @ 2022-03-29 11:58 UTC (permalink / raw) To: lee.jones, robh+dt, matthias.bgg, lgirdwood, broonie, eddie.huang, a.zummo, alexandre.belloni, fshao Cc: srv_heupstream, hui.liu, zhiyong.tao, hsin-hsiung.wang, sean.wang, macpaul.lin, wen.su, devicetree, linux-kernel, linux-rtc, Project_Global_Chrome_Upstream_Group, linux-arm-kernel, linux-mediatek This patch fix pwrap time out issue. Zhiyong.Tao (1): pwrap: mediatek: fix wait time out issue drivers/soc/mediatek/mtk-pmic-wrap.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) mode change 100644 => 100755 drivers/soc/mediatek/mtk-pmic-wrap.c -- 2.18.0 _______________________________________________ Linux-mediatek mailing list Linux-mediatek@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-mediatek ^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v1 1/1] pwrap: mediatek: fix wait time out issue 2022-03-29 11:58 ` Zhiyong Tao (?) @ 2022-03-29 11:58 ` Zhiyong Tao -1 siblings, 0 replies; 11+ messages in thread From: Zhiyong Tao @ 2022-03-29 11:58 UTC (permalink / raw) To: lee.jones, robh+dt, matthias.bgg, lgirdwood, broonie, eddie.huang, a.zummo, alexandre.belloni, fshao Cc: srv_heupstream, hui.liu, zhiyong.tao, hsin-hsiung.wang, sean.wang, macpaul.lin, wen.su, devicetree, linux-kernel, linux-rtc, Project_Global_Chrome_Upstream_Group, linux-arm-kernel, linux-mediatek From: "Zhiyong.Tao" <zhiyong.tao@mediatek.com> add sleep delay before read "jiffies" Signed-off-by: Zhiyong.Tao <zhiyong.tao@mediatek.com> --- drivers/soc/mediatek/mtk-pmic-wrap.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) mode change 100644 => 100755 drivers/soc/mediatek/mtk-pmic-wrap.c diff --git a/drivers/soc/mediatek/mtk-pmic-wrap.c b/drivers/soc/mediatek/mtk-pmic-wrap.c old mode 100644 new mode 100755 index 952bc554f443..ac7139a67e87 --- a/drivers/soc/mediatek/mtk-pmic-wrap.c +++ b/drivers/soc/mediatek/mtk-pmic-wrap.c @@ -12,6 +12,7 @@ #include <linux/platform_device.h> #include <linux/regmap.h> #include <linux/reset.h> +#include <linux/delay.h> #define PWRAP_MT8135_BRIDGE_IORD_ARB_EN 0x4 #define PWRAP_MT8135_BRIDGE_WACS3_EN 0x10 @@ -1197,10 +1198,13 @@ static int pwrap_wait_for_state(struct pmic_wrapper *wrp, timeout = jiffies + usecs_to_jiffies(10000); do { - if (time_after(jiffies, timeout)) - return fp(wrp) ? 0 : -ETIMEDOUT; if (fp(wrp)) return 0; + + usleep_range(10, 11); + + if (time_after(jiffies, timeout)) + return fp(wrp) ? 0 : -ETIMEDOUT; } while (1); } -- 2.18.0 ^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH v1 1/1] pwrap: mediatek: fix wait time out issue @ 2022-03-29 11:58 ` Zhiyong Tao 0 siblings, 0 replies; 11+ messages in thread From: Zhiyong Tao @ 2022-03-29 11:58 UTC (permalink / raw) To: lee.jones, robh+dt, matthias.bgg, lgirdwood, broonie, eddie.huang, a.zummo, alexandre.belloni, fshao Cc: srv_heupstream, hui.liu, zhiyong.tao, hsin-hsiung.wang, sean.wang, macpaul.lin, wen.su, devicetree, linux-kernel, linux-rtc, Project_Global_Chrome_Upstream_Group, linux-arm-kernel, linux-mediatek From: "Zhiyong.Tao" <zhiyong.tao@mediatek.com> add sleep delay before read "jiffies" Signed-off-by: Zhiyong.Tao <zhiyong.tao@mediatek.com> --- drivers/soc/mediatek/mtk-pmic-wrap.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) mode change 100644 => 100755 drivers/soc/mediatek/mtk-pmic-wrap.c diff --git a/drivers/soc/mediatek/mtk-pmic-wrap.c b/drivers/soc/mediatek/mtk-pmic-wrap.c old mode 100644 new mode 100755 index 952bc554f443..ac7139a67e87 --- a/drivers/soc/mediatek/mtk-pmic-wrap.c +++ b/drivers/soc/mediatek/mtk-pmic-wrap.c @@ -12,6 +12,7 @@ #include <linux/platform_device.h> #include <linux/regmap.h> #include <linux/reset.h> +#include <linux/delay.h> #define PWRAP_MT8135_BRIDGE_IORD_ARB_EN 0x4 #define PWRAP_MT8135_BRIDGE_WACS3_EN 0x10 @@ -1197,10 +1198,13 @@ static int pwrap_wait_for_state(struct pmic_wrapper *wrp, timeout = jiffies + usecs_to_jiffies(10000); do { - if (time_after(jiffies, timeout)) - return fp(wrp) ? 0 : -ETIMEDOUT; if (fp(wrp)) return 0; + + usleep_range(10, 11); + + if (time_after(jiffies, timeout)) + return fp(wrp) ? 0 : -ETIMEDOUT; } while (1); } -- 2.18.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH v1 1/1] pwrap: mediatek: fix wait time out issue @ 2022-03-29 11:58 ` Zhiyong Tao 0 siblings, 0 replies; 11+ messages in thread From: Zhiyong Tao @ 2022-03-29 11:58 UTC (permalink / raw) To: lee.jones, robh+dt, matthias.bgg, lgirdwood, broonie, eddie.huang, a.zummo, alexandre.belloni, fshao Cc: srv_heupstream, hui.liu, zhiyong.tao, hsin-hsiung.wang, sean.wang, macpaul.lin, wen.su, devicetree, linux-kernel, linux-rtc, Project_Global_Chrome_Upstream_Group, linux-arm-kernel, linux-mediatek From: "Zhiyong.Tao" <zhiyong.tao@mediatek.com> add sleep delay before read "jiffies" Signed-off-by: Zhiyong.Tao <zhiyong.tao@mediatek.com> --- drivers/soc/mediatek/mtk-pmic-wrap.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) mode change 100644 => 100755 drivers/soc/mediatek/mtk-pmic-wrap.c diff --git a/drivers/soc/mediatek/mtk-pmic-wrap.c b/drivers/soc/mediatek/mtk-pmic-wrap.c old mode 100644 new mode 100755 index 952bc554f443..ac7139a67e87 --- a/drivers/soc/mediatek/mtk-pmic-wrap.c +++ b/drivers/soc/mediatek/mtk-pmic-wrap.c @@ -12,6 +12,7 @@ #include <linux/platform_device.h> #include <linux/regmap.h> #include <linux/reset.h> +#include <linux/delay.h> #define PWRAP_MT8135_BRIDGE_IORD_ARB_EN 0x4 #define PWRAP_MT8135_BRIDGE_WACS3_EN 0x10 @@ -1197,10 +1198,13 @@ static int pwrap_wait_for_state(struct pmic_wrapper *wrp, timeout = jiffies + usecs_to_jiffies(10000); do { - if (time_after(jiffies, timeout)) - return fp(wrp) ? 0 : -ETIMEDOUT; if (fp(wrp)) return 0; + + usleep_range(10, 11); + + if (time_after(jiffies, timeout)) + return fp(wrp) ? 0 : -ETIMEDOUT; } while (1); } -- 2.18.0 _______________________________________________ Linux-mediatek mailing list Linux-mediatek@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-mediatek ^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH v1 1/1] pwrap: mediatek: fix wait time out issue 2022-03-29 11:58 ` Zhiyong Tao (?) @ 2022-03-29 14:44 ` Matthias Brugger -1 siblings, 0 replies; 11+ messages in thread From: Matthias Brugger @ 2022-03-29 14:44 UTC (permalink / raw) To: Zhiyong Tao, lee.jones, robh+dt, lgirdwood, broonie, eddie.huang, a.zummo, alexandre.belloni, fshao Cc: srv_heupstream, hui.liu, hsin-hsiung.wang, sean.wang, macpaul.lin, wen.su, devicetree, linux-kernel, linux-rtc, Project_Global_Chrome_Upstream_Group, linux-arm-kernel, linux-mediatek On 29/03/2022 13:58, Zhiyong Tao wrote: > From: "Zhiyong.Tao" <zhiyong.tao@mediatek.com> > > add sleep delay before read "jiffies" > > Signed-off-by: Zhiyong.Tao <zhiyong.tao@mediatek.com> > --- > drivers/soc/mediatek/mtk-pmic-wrap.c | 8 ++++++-- > 1 file changed, 6 insertions(+), 2 deletions(-) > mode change 100644 => 100755 drivers/soc/mediatek/mtk-pmic-wrap.c > > diff --git a/drivers/soc/mediatek/mtk-pmic-wrap.c b/drivers/soc/mediatek/mtk-pmic-wrap.c > old mode 100644 > new mode 100755 > index 952bc554f443..ac7139a67e87 > --- a/drivers/soc/mediatek/mtk-pmic-wrap.c > +++ b/drivers/soc/mediatek/mtk-pmic-wrap.c > @@ -12,6 +12,7 @@ > #include <linux/platform_device.h> > #include <linux/regmap.h> > #include <linux/reset.h> > +#include <linux/delay.h> > > #define PWRAP_MT8135_BRIDGE_IORD_ARB_EN 0x4 > #define PWRAP_MT8135_BRIDGE_WACS3_EN 0x10 > @@ -1197,10 +1198,13 @@ static int pwrap_wait_for_state(struct pmic_wrapper *wrp, > timeout = jiffies + usecs_to_jiffies(10000); > > do { > - if (time_after(jiffies, timeout)) > - return fp(wrp) ? 0 : -ETIMEDOUT; > if (fp(wrp)) > return 0; > + > + usleep_range(10, 11); > + You need to explain this change. Why is it needed, are you sure it does not break other platforms etc. I can guess why you need that patch here. In any case in the code you provide, it would make sense to move the first if out of the do loop and only after this wait 10 us before reading again. Right now the code does usleep only after every other read. Regards, Matthias > + if (time_after(jiffies, timeout)) > + return fp(wrp) ? 0 : -ETIMEDOUT; > } while (1); > } > ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH v1 1/1] pwrap: mediatek: fix wait time out issue @ 2022-03-29 14:44 ` Matthias Brugger 0 siblings, 0 replies; 11+ messages in thread From: Matthias Brugger @ 2022-03-29 14:44 UTC (permalink / raw) To: Zhiyong Tao, lee.jones, robh+dt, lgirdwood, broonie, eddie.huang, a.zummo, alexandre.belloni, fshao Cc: srv_heupstream, hui.liu, hsin-hsiung.wang, sean.wang, macpaul.lin, wen.su, devicetree, linux-kernel, linux-rtc, Project_Global_Chrome_Upstream_Group, linux-arm-kernel, linux-mediatek On 29/03/2022 13:58, Zhiyong Tao wrote: > From: "Zhiyong.Tao" <zhiyong.tao@mediatek.com> > > add sleep delay before read "jiffies" > > Signed-off-by: Zhiyong.Tao <zhiyong.tao@mediatek.com> > --- > drivers/soc/mediatek/mtk-pmic-wrap.c | 8 ++++++-- > 1 file changed, 6 insertions(+), 2 deletions(-) > mode change 100644 => 100755 drivers/soc/mediatek/mtk-pmic-wrap.c > > diff --git a/drivers/soc/mediatek/mtk-pmic-wrap.c b/drivers/soc/mediatek/mtk-pmic-wrap.c > old mode 100644 > new mode 100755 > index 952bc554f443..ac7139a67e87 > --- a/drivers/soc/mediatek/mtk-pmic-wrap.c > +++ b/drivers/soc/mediatek/mtk-pmic-wrap.c > @@ -12,6 +12,7 @@ > #include <linux/platform_device.h> > #include <linux/regmap.h> > #include <linux/reset.h> > +#include <linux/delay.h> > > #define PWRAP_MT8135_BRIDGE_IORD_ARB_EN 0x4 > #define PWRAP_MT8135_BRIDGE_WACS3_EN 0x10 > @@ -1197,10 +1198,13 @@ static int pwrap_wait_for_state(struct pmic_wrapper *wrp, > timeout = jiffies + usecs_to_jiffies(10000); > > do { > - if (time_after(jiffies, timeout)) > - return fp(wrp) ? 0 : -ETIMEDOUT; > if (fp(wrp)) > return 0; > + > + usleep_range(10, 11); > + You need to explain this change. Why is it needed, are you sure it does not break other platforms etc. I can guess why you need that patch here. In any case in the code you provide, it would make sense to move the first if out of the do loop and only after this wait 10 us before reading again. Right now the code does usleep only after every other read. Regards, Matthias > + if (time_after(jiffies, timeout)) > + return fp(wrp) ? 0 : -ETIMEDOUT; > } while (1); > } > _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH v1 1/1] pwrap: mediatek: fix wait time out issue @ 2022-03-29 14:44 ` Matthias Brugger 0 siblings, 0 replies; 11+ messages in thread From: Matthias Brugger @ 2022-03-29 14:44 UTC (permalink / raw) To: Zhiyong Tao, lee.jones, robh+dt, lgirdwood, broonie, eddie.huang, a.zummo, alexandre.belloni, fshao Cc: srv_heupstream, hui.liu, hsin-hsiung.wang, sean.wang, macpaul.lin, wen.su, devicetree, linux-kernel, linux-rtc, Project_Global_Chrome_Upstream_Group, linux-arm-kernel, linux-mediatek On 29/03/2022 13:58, Zhiyong Tao wrote: > From: "Zhiyong.Tao" <zhiyong.tao@mediatek.com> > > add sleep delay before read "jiffies" > > Signed-off-by: Zhiyong.Tao <zhiyong.tao@mediatek.com> > --- > drivers/soc/mediatek/mtk-pmic-wrap.c | 8 ++++++-- > 1 file changed, 6 insertions(+), 2 deletions(-) > mode change 100644 => 100755 drivers/soc/mediatek/mtk-pmic-wrap.c > > diff --git a/drivers/soc/mediatek/mtk-pmic-wrap.c b/drivers/soc/mediatek/mtk-pmic-wrap.c > old mode 100644 > new mode 100755 > index 952bc554f443..ac7139a67e87 > --- a/drivers/soc/mediatek/mtk-pmic-wrap.c > +++ b/drivers/soc/mediatek/mtk-pmic-wrap.c > @@ -12,6 +12,7 @@ > #include <linux/platform_device.h> > #include <linux/regmap.h> > #include <linux/reset.h> > +#include <linux/delay.h> > > #define PWRAP_MT8135_BRIDGE_IORD_ARB_EN 0x4 > #define PWRAP_MT8135_BRIDGE_WACS3_EN 0x10 > @@ -1197,10 +1198,13 @@ static int pwrap_wait_for_state(struct pmic_wrapper *wrp, > timeout = jiffies + usecs_to_jiffies(10000); > > do { > - if (time_after(jiffies, timeout)) > - return fp(wrp) ? 0 : -ETIMEDOUT; > if (fp(wrp)) > return 0; > + > + usleep_range(10, 11); > + You need to explain this change. Why is it needed, are you sure it does not break other platforms etc. I can guess why you need that patch here. In any case in the code you provide, it would make sense to move the first if out of the do loop and only after this wait 10 us before reading again. Right now the code does usleep only after every other read. Regards, Matthias > + if (time_after(jiffies, timeout)) > + return fp(wrp) ? 0 : -ETIMEDOUT; > } while (1); > } > _______________________________________________ Linux-mediatek mailing list Linux-mediatek@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-mediatek ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH v1 1/1] pwrap: mediatek: fix wait time out issue 2022-03-29 14:44 ` Matthias Brugger @ 2022-04-18 1:29 ` zhiyong.tao -1 siblings, 0 replies; 11+ messages in thread From: zhiyong.tao @ 2022-04-18 1:29 UTC (permalink / raw) To: Matthias Brugger, lee.jones, robh+dt, lgirdwood, broonie, eddie.huang, a.zummo, alexandre.belloni, fshao Cc: srv_heupstream, hui.liu, hsin-hsiung.wang, sean.wang, macpaul.lin, wen.su, devicetree, linux-kernel, linux-rtc, Project_Global_Chrome_Upstream_Group, linux-arm-kernel, linux-mediatek On Tue, 2022-03-29 at 16:44 +0200, Matthias Brugger wrote: > > On 29/03/2022 13:58, Zhiyong Tao wrote: > > From: "Zhiyong.Tao" <zhiyong.tao@mediatek.com> > > > > add sleep delay before read "jiffies" > > > > Signed-off-by: Zhiyong.Tao <zhiyong.tao@mediatek.com> > > --- > > drivers/soc/mediatek/mtk-pmic-wrap.c | 8 ++++++-- > > 1 file changed, 6 insertions(+), 2 deletions(-) > > mode change 100644 => 100755 drivers/soc/mediatek/mtk-pmic-wrap.c > > > > diff --git a/drivers/soc/mediatek/mtk-pmic-wrap.c > > b/drivers/soc/mediatek/mtk-pmic-wrap.c > > old mode 100644 > > new mode 100755 > > index 952bc554f443..ac7139a67e87 > > --- a/drivers/soc/mediatek/mtk-pmic-wrap.c > > +++ b/drivers/soc/mediatek/mtk-pmic-wrap.c > > @@ -12,6 +12,7 @@ > > #include <linux/platform_device.h> > > #include <linux/regmap.h> > > #include <linux/reset.h> > > +#include <linux/delay.h> > > > > #define PWRAP_MT8135_BRIDGE_IORD_ARB_EN 0x4 > > #define PWRAP_MT8135_BRIDGE_WACS3_EN 0x10 > > @@ -1197,10 +1198,13 @@ static int pwrap_wait_for_state(struct > > pmic_wrapper *wrp, > > timeout = jiffies + usecs_to_jiffies(10000); > > > > do { > > - if (time_after(jiffies, timeout)) > > - return fp(wrp) ? 0 : -ETIMEDOUT; > > if (fp(wrp)) > > return 0; > > + > > + usleep_range(10, 11); > > + > > You need to explain this change. Why is it needed, are you sure it > does not > break other platforms etc. > > I can guess why you need that patch here. In any case in the code you > provide, > it would make sense to move the first if out of the do loop and only > after this > wait 10 us before reading again. Right now the code does usleep only > after every > other read. > > Regards, > Matthias > Hi Mattias, we confirm the delay time with our pwrap designer. we should add the 10us delay before reading again. The patch is accord with all platforms pwrap design. we will explain this in next version. Thanks. > > + if (time_after(jiffies, timeout)) > > + return fp(wrp) ? 0 : -ETIMEDOUT; > > } while (1); > > } > > _______________________________________________ Linux-mediatek mailing list Linux-mediatek@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-mediatek ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH v1 1/1] pwrap: mediatek: fix wait time out issue @ 2022-04-18 1:29 ` zhiyong.tao 0 siblings, 0 replies; 11+ messages in thread From: zhiyong.tao @ 2022-04-18 1:29 UTC (permalink / raw) To: Matthias Brugger, lee.jones, robh+dt, lgirdwood, broonie, eddie.huang, a.zummo, alexandre.belloni, fshao Cc: srv_heupstream, hui.liu, hsin-hsiung.wang, sean.wang, macpaul.lin, wen.su, devicetree, linux-kernel, linux-rtc, Project_Global_Chrome_Upstream_Group, linux-arm-kernel, linux-mediatek On Tue, 2022-03-29 at 16:44 +0200, Matthias Brugger wrote: > > On 29/03/2022 13:58, Zhiyong Tao wrote: > > From: "Zhiyong.Tao" <zhiyong.tao@mediatek.com> > > > > add sleep delay before read "jiffies" > > > > Signed-off-by: Zhiyong.Tao <zhiyong.tao@mediatek.com> > > --- > > drivers/soc/mediatek/mtk-pmic-wrap.c | 8 ++++++-- > > 1 file changed, 6 insertions(+), 2 deletions(-) > > mode change 100644 => 100755 drivers/soc/mediatek/mtk-pmic-wrap.c > > > > diff --git a/drivers/soc/mediatek/mtk-pmic-wrap.c > > b/drivers/soc/mediatek/mtk-pmic-wrap.c > > old mode 100644 > > new mode 100755 > > index 952bc554f443..ac7139a67e87 > > --- a/drivers/soc/mediatek/mtk-pmic-wrap.c > > +++ b/drivers/soc/mediatek/mtk-pmic-wrap.c > > @@ -12,6 +12,7 @@ > > #include <linux/platform_device.h> > > #include <linux/regmap.h> > > #include <linux/reset.h> > > +#include <linux/delay.h> > > > > #define PWRAP_MT8135_BRIDGE_IORD_ARB_EN 0x4 > > #define PWRAP_MT8135_BRIDGE_WACS3_EN 0x10 > > @@ -1197,10 +1198,13 @@ static int pwrap_wait_for_state(struct > > pmic_wrapper *wrp, > > timeout = jiffies + usecs_to_jiffies(10000); > > > > do { > > - if (time_after(jiffies, timeout)) > > - return fp(wrp) ? 0 : -ETIMEDOUT; > > if (fp(wrp)) > > return 0; > > + > > + usleep_range(10, 11); > > + > > You need to explain this change. Why is it needed, are you sure it > does not > break other platforms etc. > > I can guess why you need that patch here. In any case in the code you > provide, > it would make sense to move the first if out of the do loop and only > after this > wait 10 us before reading again. Right now the code does usleep only > after every > other read. > > Regards, > Matthias > Hi Mattias, we confirm the delay time with our pwrap designer. we should add the 10us delay before reading again. The patch is accord with all platforms pwrap design. we will explain this in next version. Thanks. > > + if (time_after(jiffies, timeout)) > > + return fp(wrp) ? 0 : -ETIMEDOUT; > > } while (1); > > } > > _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2022-04-18 1:31 UTC | newest] Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2022-03-29 11:58 [PATCH v1 0/1] Mediatek PMIC patch Zhiyong Tao 2022-03-29 11:58 ` Zhiyong Tao 2022-03-29 11:58 ` Zhiyong Tao 2022-03-29 11:58 ` [PATCH v1 1/1] pwrap: mediatek: fix wait time out issue Zhiyong Tao 2022-03-29 11:58 ` Zhiyong Tao 2022-03-29 11:58 ` Zhiyong Tao 2022-03-29 14:44 ` Matthias Brugger 2022-03-29 14:44 ` Matthias Brugger 2022-03-29 14:44 ` Matthias Brugger 2022-04-18 1:29 ` zhiyong.tao 2022-04-18 1:29 ` zhiyong.tao
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.