All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
To: Bjorn Helgaas <helgaas@kernel.org>
Cc: linuxarm@huawei.com, mauro.chehab@huawei.com,
	"Mauro Carvalho Chehab" <mchehab+huawei@kernel.org>,
	"Krzysztof Wilczyński" <kw@linux.com>,
	"Manivannan Sadhasivam" <mani@kernel.org>,
	"Rob Herring" <robh@kernel.org>,
	"Binghui Wang" <wangbinghui@hisilicon.com>,
	"Bjorn Helgaas" <bhelgaas@google.com>,
	"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
	"Kishon Vijay Abraham I" <kishon@ti.com>,
	"Lorenzo Pieralisi" <lorenzo.pieralisi@arm.com>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Vinod Koul" <vkoul@kernel.org>,
	"Xiaowei Song" <songxiaowei@hisilicon.com>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-pci@vger.kernel.org, linux-phy@lists.infradead.org
Subject: [PATCH v5 6/8] phy: HiSilicon: add driver for Kirin 970 PCIe PHY
Date: Tue, 13 Jul 2021 08:28:39 +0200	[thread overview]
Message-ID: <d550a488cbd9a96372e3ef19d57b514c1cbf204b.1626157454.git.mchehab+huawei@kernel.org> (raw)
In-Reply-To: <cover.1626157454.git.mchehab+huawei@kernel.org>

The Kirin 970 PHY is somewhat similar to the Kirin 960, but it
does a lot more. Add the needed bits for PCIe to start working on
HiKey 970 boards.

Co-developed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 .../devicetree/bindings/pci/kirin-pcie.txt    |   1 +
 drivers/pci/controller/dwc/pcie-kirin.c       |   1 +
 drivers/phy/hisilicon/Kconfig                 |  10 +
 drivers/phy/hisilicon/Makefile                |   1 +
 drivers/phy/hisilicon/phy-hi3670-pcie.c       | 892 ++++++++++++++++++
 5 files changed, 905 insertions(+)
 create mode 100644 drivers/phy/hisilicon/phy-hi3670-pcie.c

diff --git a/Documentation/devicetree/bindings/pci/kirin-pcie.txt b/Documentation/devicetree/bindings/pci/kirin-pcie.txt
index a93a8cfa1afb..585aadfeafd1 100644
--- a/Documentation/devicetree/bindings/pci/kirin-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/kirin-pcie.txt
@@ -10,6 +10,7 @@ Additional properties are described here:
 Required properties
 - compatible:
 	"hisilicon,kirin960-pcie"
+	"hisilicon,kirin970-pcie"
 - reg: Should contain rc_dbi, apb, config registers location and length.
 - reg-names: Must include the following entries:
   "dbi": controller configuration registers;
diff --git a/drivers/pci/controller/dwc/pcie-kirin.c b/drivers/pci/controller/dwc/pcie-kirin.c
index 026fd1e42a55..7b0f87535960 100644
--- a/drivers/pci/controller/dwc/pcie-kirin.c
+++ b/drivers/pci/controller/dwc/pcie-kirin.c
@@ -472,6 +472,7 @@ static int kirin_pcie_probe(struct platform_device *pdev)
 
 static const struct of_device_id kirin_pcie_match[] = {
 	{ .compatible = "hisilicon,kirin960-pcie" },
+	{ .compatible = "hisilicon,kirin970-pcie" },
 	{},
 };
 
diff --git a/drivers/phy/hisilicon/Kconfig b/drivers/phy/hisilicon/Kconfig
index 30b7f1187965..65e0ff6e85ad 100644
--- a/drivers/phy/hisilicon/Kconfig
+++ b/drivers/phy/hisilicon/Kconfig
@@ -43,6 +43,16 @@ config PHY_HI3670_USB
 
 	  To compile this driver as a module, choose M here.
 
+config PHY_HI3670_PCIE
+	tristate "hi3670 PCIe PHY support"
+	depends on (ARCH_HISI && ARM64) || COMPILE_TEST
+	select GENERIC_PHY
+	select MFD_SYSCON
+	help
+	  Enable this to support the HiSilicon hi3670 PCIe PHY.
+
+	  To compile this driver as a module, choose M here.
+
 config PHY_HISTB_COMBPHY
 	tristate "HiSilicon STB SoCs COMBPHY support"
 	depends on (ARCH_HISI && ARM64) || COMPILE_TEST
diff --git a/drivers/phy/hisilicon/Makefile b/drivers/phy/hisilicon/Makefile
index 3c3d70dd7469..2670f2f382e1 100644
--- a/drivers/phy/hisilicon/Makefile
+++ b/drivers/phy/hisilicon/Makefile
@@ -3,6 +3,7 @@ obj-$(CONFIG_PHY_HI6220_USB)		+= phy-hi6220-usb.o
 obj-$(CONFIG_PHY_HI3660_USB)		+= phy-hi3660-usb3.o
 obj-$(CONFIG_PHY_HI3660_PCIE)		+= phy-hi3660-pcie.o
 obj-$(CONFIG_PHY_HI3670_USB)		+= phy-hi3670-usb3.o
+obj-$(CONFIG_PHY_HI3670_PCIE)		+= phy-hi3670-pcie.o
 obj-$(CONFIG_PHY_HISTB_COMBPHY)		+= phy-histb-combphy.o
 obj-$(CONFIG_PHY_HISI_INNO_USB2)	+= phy-hisi-inno-usb2.o
 obj-$(CONFIG_PHY_HIX5HD2_SATA)		+= phy-hix5hd2-sata.o
diff --git a/drivers/phy/hisilicon/phy-hi3670-pcie.c b/drivers/phy/hisilicon/phy-hi3670-pcie.c
new file mode 100644
index 000000000000..3e3a15d9006d
--- /dev/null
+++ b/drivers/phy/hisilicon/phy-hi3670-pcie.c
@@ -0,0 +1,892 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * PCIe phy driver for Kirin 970
+ *
+ * Copyright (C) 2017 HiSilicon Electronics Co., Ltd.
+ *		https://www.huawei.com
+ * Copyright (C) 2021 Huawei Technologies Co., Ltd.
+ *		https://www.huawei.com
+ *
+ * Authors:
+ *	Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+ *	Manivannan Sadhasivam <mani@kernel.org>
+ *
+ * Based on:
+ * 	https://lore.kernel.org/lkml/4c9d6581478aa966698758c0420933f5defab4dd.1612335031.git.mchehab+huawei@kernel.org/
+ */
+
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_gpio.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define AXI_CLK_FREQ			207500000
+#define REF_CLK_FREQ			100000000
+
+/* PCIe CTRL registers */
+#define SOC_PCIECTRL_CTRL0_ADDR   0x000
+#define SOC_PCIECTRL_CTRL1_ADDR   0x004
+#define SOC_PCIECTRL_CTRL7_ADDR   0x01c
+#define SOC_PCIECTRL_CTRL12_ADDR  0x030
+#define SOC_PCIECTRL_CTRL20_ADDR  0x050
+#define SOC_PCIECTRL_CTRL21_ADDR  0x054
+#define SOC_PCIECTRL_STATE0_ADDR  0x400
+
+/* PCIe PHY registers */
+#define SOC_PCIEPHY_CTRL0_ADDR    0x000
+#define SOC_PCIEPHY_CTRL1_ADDR    0x004
+#define SOC_PCIEPHY_CTRL2_ADDR    0x008
+#define SOC_PCIEPHY_CTRL3_ADDR    0x00c
+#define SOC_PCIEPHY_CTRL38_ADDR   0x0098
+#define SOC_PCIEPHY_STATE0_ADDR   0x400
+
+#define PCIE_LINKUP_ENABLE            (0x8020)
+#define PCIE_ELBI_SLV_DBI_ENABLE      (0x1 << 21)
+#define PCIE_LTSSM_ENABLE_BIT         (0x1 << 11)
+#define PCIEPHY_RESET_BIT             (0x1 << 17)
+#define PCIEPHY_PIPE_LINE0_RESET_BIT  (0x1 << 19)
+
+#define PORT_MSI_CTRL_ADDR            0x820
+#define PORT_MSI_CTRL_UPPER_ADDR      0x824
+#define PORT_MSI_CTRL_INT0_ENABLE     0x828
+
+#define EYEPARAM_NOCFG 0xFFFFFFFF
+#define RAWLANEN_DIG_PCS_XF_TX_OVRD_IN_1 0x3001
+#define SUP_DIG_LVL_OVRD_IN 0xf
+#define LANEN_DIG_ASIC_TX_OVRD_IN_1 0x1002
+#define LANEN_DIG_ASIC_TX_OVRD_IN_2 0x1003
+
+/* hi3670 pciephy register */
+#define SOC_PCIEPHY_MMC1PLL_CTRL1  0xc04
+#define SOC_PCIEPHY_MMC1PLL_CTRL16 0xC40
+#define SOC_PCIEPHY_MMC1PLL_CTRL17 0xC44
+#define SOC_PCIEPHY_MMC1PLL_CTRL20 0xC50
+#define SOC_PCIEPHY_MMC1PLL_CTRL21 0xC54
+#define SOC_PCIEPHY_MMC1PLL_STAT0  0xE00
+
+#define CRGPERIPH_PEREN12   0x470
+#define CRGPERIPH_PERDIS12  0x474
+#define CRGPERIPH_PCIECTRL0 0x800
+
+/* define ie,oe cfg */
+#define IO_IE_EN_HARD_BYPASS         (0x1 << 27)
+#define IO_OE_EN_HARD_BYPASS         (0x1 << 11)
+#define IO_HARD_CTRL_DEBOUNCE_BYPASS (0x1 << 10)
+#define IO_OE_GT_MODE                (0x2 << 7)
+#define DEBOUNCE_WAITCFG_IN          (0xf << 20)
+#define DEBOUNCE_WAITCFG_OUT         (0xf << 13)
+
+/* noc power domain */
+#define NOC_POWER_IDLEREQ_1 0x38c
+#define NOC_POWER_IDLE_1    0x394
+#define NOC_PW_MASK         0x10000
+#define NOC_PW_SET_BIT      0x1
+
+/* Number of GPIOs required by PHY */
+#define MAX_GPIO_RESETS		4
+#define MAX_GPIO_CLKREQ		3
+#define NUM_EYEPARAM		5
+
+/* info located in sysctrl */
+#define SCTRL_PCIE_CMOS_OFFSET	0x60
+#define SCTRL_PCIE_CMOS_BIT	0x10
+#define SCTRL_PCIE_ISO_OFFSET	0x44
+#define SCTRL_PCIE_ISO_BIT	0x30
+#define SCTRL_PCIE_HPCLK_OFFSET	0x190
+#define SCTRL_PCIE_HPCLK_BIT	0x184000
+#define SCTRL_PCIE_OE_OFFSET	0x14a
+#define PCIE_DEBOUNCE_PARAM	0xF0F400
+#define PCIE_OE_BYPASS		(0x3 << 28)
+
+/* peri_crg ctrl */
+#define CRGCTRL_PCIE_ASSERT_OFFSET	0x88
+#define CRGCTRL_PCIE_ASSERT_BIT		0x8c000000
+
+/* Time for delay */
+#define REF_2_PERST_MIN		20000
+#define REF_2_PERST_MAX		25000
+#define PERST_2_ACCESS_MIN	10000
+#define PERST_2_ACCESS_MAX	12000
+#define PIPE_CLK_WAIT_MIN	550
+#define PIPE_CLK_WAIT_MAX	600
+#define TIME_CMOS_MIN		100
+#define TIME_CMOS_MAX		105
+#define TIME_PHY_PD_MIN		10
+#define TIME_PHY_PD_MAX		11
+
+struct hi3670_pcie_phy {
+	struct device	*dev;
+	void __iomem	*base;
+	struct regmap	*apb;
+	struct regmap	*crgctrl;
+	struct regmap	*sysctrl;
+	struct regmap	*pmctrl;
+	struct clk	*apb_sys_clk;
+	struct clk	*apb_phy_clk;
+	struct clk	*phy_ref_clk;
+	struct clk	*pcie_aclk;
+	struct clk	*pcie_aux_clk;
+	int		n_gpio_resets;
+	int		n_gpio_clkreq;
+	int		gpio_id_reset[MAX_GPIO_RESETS];
+	const char	*reset_names[MAX_GPIO_RESETS];
+	int		gpio_id_clkreq[MAX_GPIO_CLKREQ];
+	const char	*clkreq_names[MAX_GPIO_CLKREQ];
+	u32		eye_param[NUM_EYEPARAM];
+};
+
+
+/* Registers in PCIePHY */
+static inline void hi3670_apb_phy_writel(struct hi3670_pcie_phy *phy,
+					 u32 val, u32 reg)
+{
+	writel(val, phy->base + 0x40000 + reg);
+}
+
+static inline u32 hi3670_apb_phy_readl(struct hi3670_pcie_phy *phy, u32 reg)
+{
+	return readl(phy->base + 0x40000 + reg);
+}
+
+static inline void kirin_apb_natural_phy_writel(struct hi3670_pcie_phy *phy,
+						u32 val, u32 reg)
+{
+	writel(val, phy->base + reg * 4);
+}
+
+static inline u32 kirin_apb_natural_phy_readl(struct hi3670_pcie_phy *phy,
+					      u32 reg)
+{
+	return readl(phy->base + reg * 4);
+}
+
+static void hi3670_pcie_phy_oe_enable(struct hi3670_pcie_phy *phy)
+{
+	u32 val;
+
+	regmap_read(phy->sysctrl, SCTRL_PCIE_OE_OFFSET, &val);
+	val |= PCIE_DEBOUNCE_PARAM;
+	val &= ~PCIE_OE_BYPASS;
+	regmap_write(phy->sysctrl, SCTRL_PCIE_OE_OFFSET, val);
+}
+
+static void hi3670_pcie_get_eyeparam(struct hi3670_pcie_phy *phy)
+{
+	struct device *dev = phy->dev;
+	struct device_node *np;
+	int ret, i;
+
+	np = dev->of_node;
+
+	ret = of_property_read_u32_array(np, "hisilicon,eye-diagram-param",
+					 phy->eye_param, NUM_EYEPARAM);
+	if (!ret)
+		return;
+
+	/* There's no optional eye_param property. Set array to default */
+	for (i = 0; i < NUM_EYEPARAM; i++)
+		phy->eye_param[i] = EYEPARAM_NOCFG;
+}
+
+static void hi3670_pcie_set_eyeparam(struct hi3670_pcie_phy *phy)
+{
+	u32 val;
+
+	val = kirin_apb_natural_phy_readl(phy, RAWLANEN_DIG_PCS_XF_TX_OVRD_IN_1);
+
+	if (phy->eye_param[1] != EYEPARAM_NOCFG) {
+		val &= (~0xf00);
+		val |= (phy->eye_param[1] << 8) | (0x1 << 12);
+	}
+	kirin_apb_natural_phy_writel(phy, val, RAWLANEN_DIG_PCS_XF_TX_OVRD_IN_1);
+
+	val = kirin_apb_natural_phy_readl(phy, LANEN_DIG_ASIC_TX_OVRD_IN_2);
+	val &= (~0x1FBF);
+	if (phy->eye_param[2] != EYEPARAM_NOCFG)
+		val |= (phy->eye_param[2]<< 0) | (0x1 << 6);
+
+	if (phy->eye_param[3] != EYEPARAM_NOCFG)
+		val |= (phy->eye_param[3] << 7) | (0x1 << 13);
+
+	kirin_apb_natural_phy_writel(phy, val, LANEN_DIG_ASIC_TX_OVRD_IN_2);
+
+	val = kirin_apb_natural_phy_readl(phy, SUP_DIG_LVL_OVRD_IN);
+	if (phy->eye_param[0] != EYEPARAM_NOCFG) {
+		val &= (~0x1C0);
+		val |= (phy->eye_param[0] << 6) | (0x1 << 9);
+	}
+	kirin_apb_natural_phy_writel(phy, val, SUP_DIG_LVL_OVRD_IN);
+
+	val = kirin_apb_natural_phy_readl(phy, LANEN_DIG_ASIC_TX_OVRD_IN_1);
+	if (phy->eye_param[4] != EYEPARAM_NOCFG) {
+		val &= (~0x7E00);
+		val |= (phy->eye_param[4] << 9) | (0x1 << 15);
+	}
+	kirin_apb_natural_phy_writel(phy, val, LANEN_DIG_ASIC_TX_OVRD_IN_1);
+}
+
+static int hi3670_pcie_gpio_request(struct hi3670_pcie_phy *phy,
+				    struct device *dev)
+{
+	int ret, i;
+
+	for (i = 0; i < phy->n_gpio_resets; i++) {
+		if (!gpio_is_valid(phy->gpio_id_reset[i])) {
+			dev_err(dev, "unable to get a valid %s gpio\n",
+				phy->reset_names[i]);
+			return -ENODEV;
+		}
+
+		ret = devm_gpio_request(dev, phy->gpio_id_reset[i],
+					phy->reset_names[i]);
+		if (ret)
+			return ret;
+	}
+
+	for (i = 0; i < phy->n_gpio_clkreq; i++) {
+		if (!gpio_is_valid(phy->gpio_id_clkreq[i])) {
+			dev_err(dev, "unable to get a valid %s gpio\n",
+				phy->clkreq_names[i]);
+			return -ENODEV;
+		}
+
+		ret = devm_gpio_request(dev, phy->gpio_id_clkreq[i],
+					phy->clkreq_names[i]);
+		if (ret)
+			return ret;
+	}
+
+	return ret;
+}
+
+static void hi3670_pcie_natural_cfg(struct hi3670_pcie_phy *phy)
+{
+	u32 val;
+
+	/* change 2p mem_ctrl */
+	regmap_write(phy->apb, SOC_PCIECTRL_CTRL20_ADDR, 0x02605550);
+
+	/* pull up sys_aux_pwr_det */
+	regmap_read(phy->apb, SOC_PCIECTRL_CTRL7_ADDR, &val);
+	val |= (0x1 << 10);
+	regmap_write(phy->apb, SOC_PCIECTRL_CTRL7_ADDR, val);
+
+	/* output, pull down */
+	regmap_read(phy->apb, SOC_PCIECTRL_CTRL12_ADDR, &val);
+	val &= ~(0x3 << 2);
+	val |= (0x1 << 1);
+	val &= ~(0x1 << 0);
+	regmap_write(phy->apb, SOC_PCIECTRL_CTRL12_ADDR, val);
+
+	/* Handle phy_reset and lane0_reset to HW */
+	val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_CTRL1_ADDR);
+	val |= PCIEPHY_RESET_BIT;
+	val &= ~PCIEPHY_PIPE_LINE0_RESET_BIT;
+	hi3670_apb_phy_writel(phy, val, SOC_PCIEPHY_CTRL1_ADDR);
+
+	/* fix chip bug: TxDetectRx fail */
+	val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_CTRL38_ADDR);
+	val |= (0x1 << 2);
+	hi3670_apb_phy_writel(phy, val, SOC_PCIEPHY_CTRL38_ADDR);
+}
+
+static void hi3670_pcie_pll_init(struct hi3670_pcie_phy *phy)
+{
+	u32 val;
+
+	/* choose FNPLL */
+	val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_MMC1PLL_CTRL1);
+	val |= (0x1 << 27);
+	hi3670_apb_phy_writel(phy, val, SOC_PCIEPHY_MMC1PLL_CTRL1);
+
+	val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_MMC1PLL_CTRL16);
+	val &= 0xF000FFFF;
+	/* fnpll fbdiv = 0xD0 */
+	val |= (0xd0 << 16);
+	hi3670_apb_phy_writel(phy, val, SOC_PCIEPHY_MMC1PLL_CTRL16);
+
+	val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_MMC1PLL_CTRL17);
+	val &= 0xFF000000;
+	/* fnpll fracdiv = 0x555555 */
+	val |= (0x555555 << 0);
+	hi3670_apb_phy_writel(phy, val, SOC_PCIEPHY_MMC1PLL_CTRL17);
+
+	val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_MMC1PLL_CTRL20);
+	val &= 0xF5FF88FF;
+	/* fnpll dll_en = 0x1 */
+	val |= (0x1 << 27);
+	/* fnpll postdiv1 = 0x5 */
+	val |= (0x5 << 8);
+	/* fnpll postdiv2 = 0x4 */
+	val |= (0x4 << 12);
+	/* fnpll pll_mode = 0x0 */
+	val &= ~(0x1 << 25);
+	hi3670_apb_phy_writel(phy, val, SOC_PCIEPHY_MMC1PLL_CTRL20);
+
+	hi3670_apb_phy_writel(phy, 0x20, SOC_PCIEPHY_MMC1PLL_CTRL21);
+}
+
+static int hi3670_pcie_pll_ctrl(struct hi3670_pcie_phy *phy, bool enable)
+{
+	struct device *dev = phy->dev;
+	u32 val;
+	int time = 200;
+
+	if (enable) {
+		/* pd = 0 */
+		val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_MMC1PLL_CTRL16);
+		val &= ~(0x1 << 0);
+		hi3670_apb_phy_writel(phy, val, SOC_PCIEPHY_MMC1PLL_CTRL16);
+
+		val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_MMC1PLL_STAT0);
+
+		/* choose FNPLL */
+		while (!(val & 0x10)) {
+			if (!time) {
+				dev_err(dev, "wait for pll_lock timeout\n");
+				return -1;
+			}
+			time --;
+			udelay(1);
+			val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_MMC1PLL_STAT0);
+		}
+
+		/* pciepll_bp = 0 */
+		val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_MMC1PLL_CTRL20);
+		val &= ~(0x1 << 16);
+		hi3670_apb_phy_writel(phy, val, SOC_PCIEPHY_MMC1PLL_CTRL20);
+
+	} else {
+		/* pd = 1 */
+		val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_MMC1PLL_CTRL16);
+		val |= (0x1 << 0);
+		hi3670_apb_phy_writel(phy, val, SOC_PCIEPHY_MMC1PLL_CTRL16);
+
+		/* pciepll_bp = 1 */
+		val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_MMC1PLL_CTRL20);
+		val |= (0x1 << 16);
+		hi3670_apb_phy_writel(phy, val, SOC_PCIEPHY_MMC1PLL_CTRL20);
+	}
+
+	 return 0;
+}
+
+static void hi3670_pcie_hp_debounce_gt(struct hi3670_pcie_phy *phy, bool open)
+{
+	if (open)
+		/* gt_clk_pcie_hp/gt_clk_pcie_debounce open */
+		regmap_write(phy->crgctrl, CRGPERIPH_PEREN12, 0x9000);
+	else
+		/* gt_clk_pcie_hp/gt_clk_pcie_debounce close */
+		regmap_write(phy->crgctrl, CRGPERIPH_PERDIS12, 0x9000);
+}
+
+static void hi3670_pcie_phyref_gt(struct hi3670_pcie_phy *phy, bool open)
+{
+	unsigned int val;
+
+	regmap_read(phy->crgctrl, CRGPERIPH_PCIECTRL0, &val);
+
+	if (open)
+		val &= ~(0x1 << 1); //enable hard gt mode
+	else
+		val |= (0x1 << 1); //disable hard gt mode
+
+	regmap_write(phy->crgctrl, CRGPERIPH_PCIECTRL0, val);
+
+	/* disable soft gt mode */
+	regmap_write(phy->crgctrl, CRGPERIPH_PERDIS12, 0x4000);
+}
+
+static void hi3670_pcie_oe_ctrl(struct hi3670_pcie_phy *phy, bool en_flag)
+{
+	unsigned int val;
+
+	regmap_read(phy->crgctrl , CRGPERIPH_PCIECTRL0, &val);
+
+	/* set ie cfg */
+	val |= IO_IE_EN_HARD_BYPASS;
+
+	/* set oe cfg */
+	val &= ~IO_HARD_CTRL_DEBOUNCE_BYPASS;
+
+	/* set phy_debounce in&out time */
+	val |= (DEBOUNCE_WAITCFG_IN | DEBOUNCE_WAITCFG_OUT);
+
+	/* select oe_gt_mode */
+	val |= IO_OE_GT_MODE;
+
+	if (en_flag)
+		val &= ~IO_OE_EN_HARD_BYPASS;
+	else
+		val |= IO_OE_EN_HARD_BYPASS;
+
+	regmap_write(phy->crgctrl, CRGPERIPH_PCIECTRL0, val);
+}
+
+static void hi3670_pcie_ioref_gt(struct hi3670_pcie_phy *phy, bool open)
+{
+	unsigned int val;
+
+	if (open) {
+		regmap_write(phy->apb, SOC_PCIECTRL_CTRL21_ADDR, 0x20000070);
+
+		hi3670_pcie_oe_ctrl(phy, true);
+
+		/* en hard gt mode */
+		regmap_read(phy->crgctrl, CRGPERIPH_PCIECTRL0, &val);
+		val &= ~(0x1 << 0);
+		regmap_write(phy->crgctrl, CRGPERIPH_PCIECTRL0, val);
+
+		/* disable soft gt mode */
+		regmap_write(phy->crgctrl, CRGPERIPH_PERDIS12, 0x2000);
+
+	} else {
+		/* disable hard gt mode */
+		regmap_read(phy->crgctrl, CRGPERIPH_PCIECTRL0, &val);
+		val |= (0x1 << 0);
+		regmap_write(phy->crgctrl, CRGPERIPH_PCIECTRL0, val);
+
+		/* disable soft gt mode */
+		regmap_write(phy->crgctrl, CRGPERIPH_PERDIS12, 0x2000);
+
+		hi3670_pcie_oe_ctrl(phy, false);
+       }
+}
+
+static int hi3670_pcie_allclk_ctrl(struct hi3670_pcie_phy *phy, bool clk_on)
+{
+	struct device *dev = phy->dev;
+	u32 val;
+	int ret = 0;
+
+	if (!clk_on)
+		goto close_clocks;
+
+	/* choose 100MHz clk src: Bit[8]==1 pad, Bit[8]==0 pll */
+	val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_CTRL1_ADDR);
+	val &= ~(0x1 << 8);
+	hi3670_apb_phy_writel(phy, val, SOC_PCIEPHY_CTRL1_ADDR);
+
+	hi3670_pcie_pll_init(phy);
+
+	ret = hi3670_pcie_pll_ctrl(phy, true);
+	if (ret) {
+		dev_err(dev, "Failed to enable pll\n");
+		return -1;
+	}
+	hi3670_pcie_hp_debounce_gt(phy, true);
+	hi3670_pcie_phyref_gt(phy, true);
+	hi3670_pcie_ioref_gt(phy, true);
+
+	ret = clk_set_rate(phy->pcie_aclk, AXI_CLK_FREQ);
+	if (ret) {
+		dev_err(dev, "Failed to set rate\n");
+		goto close_clocks;
+	}
+
+	return 0;
+
+close_clocks:
+	hi3670_pcie_ioref_gt(phy, false);
+	hi3670_pcie_phyref_gt(phy, false);
+	hi3670_pcie_hp_debounce_gt(phy, false);
+
+	hi3670_pcie_pll_ctrl(phy, false);
+
+	return ret;
+}
+
+static bool is_pipe_clk_stable(struct hi3670_pcie_phy *phy)
+{
+	struct device *dev = phy->dev;
+	u32 val;
+	u32 time = 100;
+	u32 pipe_clk_stable = 0x1 << 19;
+
+	val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_STATE0_ADDR);
+	while (val & pipe_clk_stable) {
+		mdelay(1);
+		if (time == 0) {
+			dev_err(dev, "PIPE clk is not stable\n");
+			return false;
+		}
+		time--;
+		val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_STATE0_ADDR);
+	}
+
+	return true;
+}
+
+static int hi3670_pcie_noc_power(struct hi3670_pcie_phy *phy, bool enable)
+{
+	struct device *dev = phy->dev;
+	u32 time = 100;
+	unsigned int val = NOC_PW_MASK;
+	int rst;
+
+	if (enable)
+		val = NOC_PW_MASK | NOC_PW_SET_BIT;
+	else
+		val = NOC_PW_MASK;
+	rst = enable ? 1 : 0;
+
+	regmap_write(phy->pmctrl, NOC_POWER_IDLEREQ_1, val);
+
+	time = 100;
+	regmap_read(phy->pmctrl, NOC_POWER_IDLE_1, &val);
+	while((val & NOC_PW_SET_BIT) != rst) {
+		udelay(10);
+		if (!time) {
+			dev_err(dev, "Failed to reverse noc power-status\n");
+			return -1;
+		}
+		time--;
+		regmap_read(phy->pmctrl, NOC_POWER_IDLE_1, &val);
+	}
+
+	return 0;
+}
+
+static int hi3670_pcie_get_apb(struct hi3670_pcie_phy *phy)
+{
+	struct device_node *pcie_port;
+	struct device *dev = phy->dev;
+	struct device *pcie_dev;
+
+	pcie_port = of_get_child_by_name(dev->parent->of_node, "pcie");
+	if (!pcie_port) {
+		dev_err(dev, "no pcie node found in %s\n",
+			dev->parent->of_node->full_name);
+		return -ENODEV;
+	}
+
+	pcie_dev = bus_find_device_by_of_node(&platform_bus_type, pcie_port);
+	if (!pcie_dev) {
+                dev_err(dev, "Didn't find pcie device\n");
+                return -ENODEV;
+        }
+
+        /*
+	 * We might just use NULL instead of the APB name, as the
+	 * pcie-kirin currently registers directly just one regmap (although
+	 * the DWC driver register other regmaps).
+	 *
+	 * Yet, it sounds safer to warrant that it will be accessing the
+	 * right regmap. So, let's use the named version.
+	 */
+	phy->apb = dev_get_regmap(pcie_dev, "kirin_pcie_apb");
+	if (!phy->apb) {
+		dev_err(dev, "Failed to get APB regmap\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+
+static int kirin_pcie_clk_ctrl(struct hi3670_pcie_phy *phy, bool enable)
+{
+	int ret = 0;
+
+	if (!enable)
+		goto close_clk;
+
+	ret = clk_set_rate(phy->phy_ref_clk, REF_CLK_FREQ);
+	if (ret)
+		return ret;
+
+	ret = clk_prepare_enable(phy->phy_ref_clk);
+	if (ret)
+		return ret;
+
+	ret = clk_prepare_enable(phy->apb_sys_clk);
+	if (ret)
+		goto apb_sys_fail;
+
+	ret = clk_prepare_enable(phy->apb_phy_clk);
+	if (ret)
+		goto apb_phy_fail;
+
+	ret = clk_prepare_enable(phy->pcie_aclk);
+	if (ret)
+		goto aclk_fail;
+
+	ret = clk_prepare_enable(phy->pcie_aux_clk);
+	if (ret)
+		goto aux_clk_fail;
+
+	return 0;
+
+close_clk:
+	clk_disable_unprepare(phy->pcie_aux_clk);
+aux_clk_fail:
+	clk_disable_unprepare(phy->pcie_aclk);
+aclk_fail:
+	clk_disable_unprepare(phy->apb_phy_clk);
+apb_phy_fail:
+	clk_disable_unprepare(phy->apb_sys_clk);
+apb_sys_fail:
+	clk_disable_unprepare(phy->phy_ref_clk);
+
+	return ret;
+}
+
+static int hi3670_pcie_phy_init(struct phy *generic_phy)
+{
+	struct hi3670_pcie_phy *phy = phy_get_drvdata(generic_phy);
+	struct device *dev = phy->dev;
+	int ret;
+
+	/*
+	 * The code under hi3670_pcie_get_apb() need to access the
+	 * DWC APB registers. So, get them from
+	 * the pcie driver's regmap (see pcie-kirin regmap).
+	 *
+	 * Such kind of resource can only be obtained during the PCIe
+	 * power_on sequence, as the code inside pcie-kirin needs to
+	 * be already probed, as it needs to register the APB regmap.
+	 */
+
+	ret = hi3670_pcie_get_apb(phy);
+	if (ret)
+		return ret;
+
+	/* phy regulator needs to be powered on before calling it */
+	return hi3670_pcie_gpio_request(phy, dev);
+}
+
+static int hi3670_pcie_phy_power_on(struct phy *generic_phy)
+{
+	struct hi3670_pcie_phy *phy = phy_get_drvdata(generic_phy);
+	int val, ret, i;
+
+	/* Power supply for Host */
+	regmap_write(phy->sysctrl,
+		     SCTRL_PCIE_CMOS_OFFSET, SCTRL_PCIE_CMOS_BIT);
+	usleep_range(TIME_CMOS_MIN, TIME_CMOS_MAX);
+
+	hi3670_pcie_phy_oe_enable(phy);
+
+	for (i = 0; i < phy->n_gpio_clkreq; i++) {
+		ret = gpio_direction_output(phy->gpio_id_clkreq[i], 0);
+		if (ret)
+			return ret;
+	}
+
+	ret = kirin_pcie_clk_ctrl(phy, true);
+	if (ret)
+		return ret;
+
+	/* ISO disable, PCIeCtrl, PHY assert and clk gate clear */
+	regmap_write(phy->sysctrl,
+		     SCTRL_PCIE_ISO_OFFSET, SCTRL_PCIE_ISO_BIT);
+	regmap_write(phy->crgctrl,
+		     CRGCTRL_PCIE_ASSERT_OFFSET, CRGCTRL_PCIE_ASSERT_BIT);
+	regmap_write(phy->sysctrl,
+		     SCTRL_PCIE_HPCLK_OFFSET, SCTRL_PCIE_HPCLK_BIT);
+
+	hi3670_pcie_natural_cfg(phy);
+
+	ret = hi3670_pcie_allclk_ctrl(phy, true);
+	if (ret)
+		goto disable_clks;
+
+	/* pull down phy_test_powerdown signal */
+	val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_CTRL0_ADDR);
+	val &= ~(0x1 << 22);
+	hi3670_apb_phy_writel(phy, val, SOC_PCIEPHY_CTRL0_ADDR);
+
+	/* deassert controller perst_n */
+	regmap_read(phy->apb, SOC_PCIECTRL_CTRL12_ADDR, &val);
+	val |= (0x1 << 2);
+	regmap_write(phy->apb, SOC_PCIECTRL_CTRL12_ADDR, val);
+	udelay(10);
+
+	/* perst assert Endpoints */
+	usleep_range(21000, 23000);
+	for (i = 0; i < phy->n_gpio_resets; i++) {
+		ret = gpio_direction_output(phy->gpio_id_reset[i], 1);
+		if (ret)
+			return ret;
+	}
+	usleep_range(10000, 11000);
+
+	ret = is_pipe_clk_stable(phy);
+	if (!ret)
+		goto disable_clks;
+
+	hi3670_pcie_set_eyeparam(phy);
+
+	ret = hi3670_pcie_noc_power(phy, false);
+	if (ret)
+		goto disable_clks;
+
+	return 0;
+
+disable_clks:
+	kirin_pcie_clk_ctrl(phy, false);
+	return ret;
+}
+
+static int hi3670_pcie_phy_power_off(struct phy *generic_phy)
+{
+	struct hi3670_pcie_phy *phy = phy_get_drvdata(generic_phy);
+
+	/* Drop power supply for Host */
+	regmap_write(phy->sysctrl, SCTRL_PCIE_CMOS_OFFSET, 0x00);
+
+	kirin_pcie_clk_ctrl(phy, false);
+
+	return 0;
+}
+
+static const struct phy_ops hi3670_phy_ops = {
+	.init		= hi3670_pcie_phy_init,
+	.power_on	= hi3670_pcie_phy_power_on,
+	.power_off	= hi3670_pcie_phy_power_off,
+	.owner		= THIS_MODULE,
+};
+
+static int hi3670_pcie_phy_get_resources(struct hi3670_pcie_phy *phy,
+					 struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	char name[32];
+	int i;
+
+	/* syscon */
+	phy->crgctrl = syscon_regmap_lookup_by_compatible("hisilicon,hi3670-crgctrl");
+	if (IS_ERR(phy->crgctrl))
+		return PTR_ERR(phy->crgctrl);
+
+	phy->sysctrl = syscon_regmap_lookup_by_compatible("hisilicon,hi3670-sctrl");
+	if (IS_ERR(phy->sysctrl))
+		return PTR_ERR(phy->sysctrl);
+
+	phy->pmctrl = syscon_regmap_lookup_by_compatible("hisilicon,hi3670-pmctrl");
+	if (IS_ERR(phy->sysctrl))
+		return PTR_ERR(phy->sysctrl);
+
+	/* clocks */
+	phy->phy_ref_clk = devm_clk_get(dev, "pcie_phy_ref");
+	if (IS_ERR(phy->phy_ref_clk))
+		return PTR_ERR(phy->phy_ref_clk);
+
+	phy->pcie_aux_clk = devm_clk_get(dev, "pcie_aux");
+	if (IS_ERR(phy->pcie_aux_clk))
+		return PTR_ERR(phy->pcie_aux_clk);
+
+	phy->apb_phy_clk = devm_clk_get(dev, "pcie_apb_phy");
+	if (IS_ERR(phy->apb_phy_clk))
+		return PTR_ERR(phy->apb_phy_clk);
+
+	phy->apb_sys_clk = devm_clk_get(dev, "pcie_apb_sys");
+	if (IS_ERR(phy->apb_sys_clk))
+		return PTR_ERR(phy->apb_sys_clk);
+
+	phy->pcie_aclk = devm_clk_get(dev, "pcie_aclk");
+	if (IS_ERR(phy->pcie_aclk))
+		return PTR_ERR(phy->pcie_aclk);
+
+	/* registers */
+	phy->base = devm_platform_ioremap_resource_byname(pdev, "phy");
+	if (IS_ERR(phy->base))
+		return PTR_ERR(phy->base);
+
+	/* perst reset gpios */
+	phy->n_gpio_resets = of_gpio_named_count(np, "reset-gpios");
+	if (phy->n_gpio_resets > MAX_GPIO_RESETS) {
+		dev_err(dev, "Too many GPIO resets!\n");
+		return -EINVAL;
+	}
+	for (i = 0; i < phy->n_gpio_resets; i++) {
+		phy->gpio_id_reset[i] = of_get_named_gpio(dev->of_node,
+							  "reset-gpios", i);
+		if (phy->gpio_id_reset[i] < 0)
+			return phy->gpio_id_reset[i];
+
+		sprintf(name, "pcie_perst_%d", i);
+
+		phy->reset_names[i] = devm_kstrdup_const(dev, name,
+							 GFP_KERNEL);
+		if (!phy->reset_names[i])
+			return -ENOMEM;
+	}
+
+	/* clock request gpios */
+	phy->n_gpio_clkreq = of_gpio_named_count(np, "clkreq-gpios");
+	if (phy->n_gpio_clkreq > MAX_GPIO_CLKREQ) {
+		dev_err(dev, "Too many GPIO clock requests!\n");
+		return -EINVAL;
+	}
+	for (i = 0; i < phy->n_gpio_clkreq; i++) {
+		phy->gpio_id_clkreq[i] = of_get_named_gpio(dev->of_node,
+							   "clkreq-gpios", i);
+		if (phy->gpio_id_clkreq[i] < 0)
+			return phy->gpio_id_clkreq[i];
+
+		sprintf(name, "pcie_clkreq_%d", i);
+		phy->clkreq_names[i] = devm_kstrdup_const(dev, name,
+							  GFP_KERNEL);
+		if (!phy->clkreq_names[i])
+			return -ENOMEM;
+	}
+
+	hi3670_pcie_get_eyeparam(phy);
+
+	return 0;
+}
+
+static int hi3670_pcie_phy_probe(struct platform_device *pdev)
+{
+	struct phy_provider *phy_provider;
+	struct device *dev = &pdev->dev;
+	struct hi3670_pcie_phy *phy;
+	struct phy *generic_phy;
+	int ret;
+
+	phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
+	if (!phy)
+		return -ENOMEM;
+
+	phy->dev = dev;
+
+	ret = hi3670_pcie_phy_get_resources(phy, pdev);
+	if (ret)
+		return ret;
+
+	generic_phy = devm_phy_create(dev, dev->of_node, &hi3670_phy_ops);
+	if (IS_ERR(generic_phy)) {
+		dev_err(dev, "failed to create PHY\n");
+		return PTR_ERR(generic_phy);
+	}
+
+	phy_set_drvdata(generic_phy, phy);
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id hi3670_pcie_phy_match[] = {
+	{
+		.compatible = "hisilicon,hi970-pcie-phy",
+	},
+	{},
+};
+
+static struct platform_driver hi3670_pcie_phy_driver = {
+	.probe	= hi3670_pcie_phy_probe,
+	.driver = {
+		.of_match_table	= hi3670_pcie_phy_match,
+		.name		= "hi3670_pcie_phy",
+		.suppress_bind_attrs = true,
+	}
+};
+builtin_platform_driver(hi3670_pcie_phy_driver);
-- 
2.31.1


WARNING: multiple messages have this Message-ID (diff)
From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
To: Bjorn Helgaas <helgaas@kernel.org>
Cc: linuxarm@huawei.com, mauro.chehab@huawei.com,
	"Mauro Carvalho Chehab" <mchehab+huawei@kernel.org>,
	"Krzysztof Wilczyński" <kw@linux.com>,
	"Manivannan Sadhasivam" <mani@kernel.org>,
	"Rob Herring" <robh@kernel.org>,
	"Binghui Wang" <wangbinghui@hisilicon.com>,
	"Bjorn Helgaas" <bhelgaas@google.com>,
	"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
	"Kishon Vijay Abraham I" <kishon@ti.com>,
	"Lorenzo Pieralisi" <lorenzo.pieralisi@arm.com>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Vinod Koul" <vkoul@kernel.org>,
	"Xiaowei Song" <songxiaowei@hisilicon.com>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-pci@vger.kernel.org, linux-phy@lists.infradead.org
Subject: [PATCH v5 6/8] phy: HiSilicon: add driver for Kirin 970 PCIe PHY
Date: Tue, 13 Jul 2021 08:28:39 +0200	[thread overview]
Message-ID: <d550a488cbd9a96372e3ef19d57b514c1cbf204b.1626157454.git.mchehab+huawei@kernel.org> (raw)
In-Reply-To: <cover.1626157454.git.mchehab+huawei@kernel.org>

The Kirin 970 PHY is somewhat similar to the Kirin 960, but it
does a lot more. Add the needed bits for PCIe to start working on
HiKey 970 boards.

Co-developed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 .../devicetree/bindings/pci/kirin-pcie.txt    |   1 +
 drivers/pci/controller/dwc/pcie-kirin.c       |   1 +
 drivers/phy/hisilicon/Kconfig                 |  10 +
 drivers/phy/hisilicon/Makefile                |   1 +
 drivers/phy/hisilicon/phy-hi3670-pcie.c       | 892 ++++++++++++++++++
 5 files changed, 905 insertions(+)
 create mode 100644 drivers/phy/hisilicon/phy-hi3670-pcie.c

diff --git a/Documentation/devicetree/bindings/pci/kirin-pcie.txt b/Documentation/devicetree/bindings/pci/kirin-pcie.txt
index a93a8cfa1afb..585aadfeafd1 100644
--- a/Documentation/devicetree/bindings/pci/kirin-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/kirin-pcie.txt
@@ -10,6 +10,7 @@ Additional properties are described here:
 Required properties
 - compatible:
 	"hisilicon,kirin960-pcie"
+	"hisilicon,kirin970-pcie"
 - reg: Should contain rc_dbi, apb, config registers location and length.
 - reg-names: Must include the following entries:
   "dbi": controller configuration registers;
diff --git a/drivers/pci/controller/dwc/pcie-kirin.c b/drivers/pci/controller/dwc/pcie-kirin.c
index 026fd1e42a55..7b0f87535960 100644
--- a/drivers/pci/controller/dwc/pcie-kirin.c
+++ b/drivers/pci/controller/dwc/pcie-kirin.c
@@ -472,6 +472,7 @@ static int kirin_pcie_probe(struct platform_device *pdev)
 
 static const struct of_device_id kirin_pcie_match[] = {
 	{ .compatible = "hisilicon,kirin960-pcie" },
+	{ .compatible = "hisilicon,kirin970-pcie" },
 	{},
 };
 
diff --git a/drivers/phy/hisilicon/Kconfig b/drivers/phy/hisilicon/Kconfig
index 30b7f1187965..65e0ff6e85ad 100644
--- a/drivers/phy/hisilicon/Kconfig
+++ b/drivers/phy/hisilicon/Kconfig
@@ -43,6 +43,16 @@ config PHY_HI3670_USB
 
 	  To compile this driver as a module, choose M here.
 
+config PHY_HI3670_PCIE
+	tristate "hi3670 PCIe PHY support"
+	depends on (ARCH_HISI && ARM64) || COMPILE_TEST
+	select GENERIC_PHY
+	select MFD_SYSCON
+	help
+	  Enable this to support the HiSilicon hi3670 PCIe PHY.
+
+	  To compile this driver as a module, choose M here.
+
 config PHY_HISTB_COMBPHY
 	tristate "HiSilicon STB SoCs COMBPHY support"
 	depends on (ARCH_HISI && ARM64) || COMPILE_TEST
diff --git a/drivers/phy/hisilicon/Makefile b/drivers/phy/hisilicon/Makefile
index 3c3d70dd7469..2670f2f382e1 100644
--- a/drivers/phy/hisilicon/Makefile
+++ b/drivers/phy/hisilicon/Makefile
@@ -3,6 +3,7 @@ obj-$(CONFIG_PHY_HI6220_USB)		+= phy-hi6220-usb.o
 obj-$(CONFIG_PHY_HI3660_USB)		+= phy-hi3660-usb3.o
 obj-$(CONFIG_PHY_HI3660_PCIE)		+= phy-hi3660-pcie.o
 obj-$(CONFIG_PHY_HI3670_USB)		+= phy-hi3670-usb3.o
+obj-$(CONFIG_PHY_HI3670_PCIE)		+= phy-hi3670-pcie.o
 obj-$(CONFIG_PHY_HISTB_COMBPHY)		+= phy-histb-combphy.o
 obj-$(CONFIG_PHY_HISI_INNO_USB2)	+= phy-hisi-inno-usb2.o
 obj-$(CONFIG_PHY_HIX5HD2_SATA)		+= phy-hix5hd2-sata.o
diff --git a/drivers/phy/hisilicon/phy-hi3670-pcie.c b/drivers/phy/hisilicon/phy-hi3670-pcie.c
new file mode 100644
index 000000000000..3e3a15d9006d
--- /dev/null
+++ b/drivers/phy/hisilicon/phy-hi3670-pcie.c
@@ -0,0 +1,892 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * PCIe phy driver for Kirin 970
+ *
+ * Copyright (C) 2017 HiSilicon Electronics Co., Ltd.
+ *		https://www.huawei.com
+ * Copyright (C) 2021 Huawei Technologies Co., Ltd.
+ *		https://www.huawei.com
+ *
+ * Authors:
+ *	Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+ *	Manivannan Sadhasivam <mani@kernel.org>
+ *
+ * Based on:
+ * 	https://lore.kernel.org/lkml/4c9d6581478aa966698758c0420933f5defab4dd.1612335031.git.mchehab+huawei@kernel.org/
+ */
+
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_gpio.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define AXI_CLK_FREQ			207500000
+#define REF_CLK_FREQ			100000000
+
+/* PCIe CTRL registers */
+#define SOC_PCIECTRL_CTRL0_ADDR   0x000
+#define SOC_PCIECTRL_CTRL1_ADDR   0x004
+#define SOC_PCIECTRL_CTRL7_ADDR   0x01c
+#define SOC_PCIECTRL_CTRL12_ADDR  0x030
+#define SOC_PCIECTRL_CTRL20_ADDR  0x050
+#define SOC_PCIECTRL_CTRL21_ADDR  0x054
+#define SOC_PCIECTRL_STATE0_ADDR  0x400
+
+/* PCIe PHY registers */
+#define SOC_PCIEPHY_CTRL0_ADDR    0x000
+#define SOC_PCIEPHY_CTRL1_ADDR    0x004
+#define SOC_PCIEPHY_CTRL2_ADDR    0x008
+#define SOC_PCIEPHY_CTRL3_ADDR    0x00c
+#define SOC_PCIEPHY_CTRL38_ADDR   0x0098
+#define SOC_PCIEPHY_STATE0_ADDR   0x400
+
+#define PCIE_LINKUP_ENABLE            (0x8020)
+#define PCIE_ELBI_SLV_DBI_ENABLE      (0x1 << 21)
+#define PCIE_LTSSM_ENABLE_BIT         (0x1 << 11)
+#define PCIEPHY_RESET_BIT             (0x1 << 17)
+#define PCIEPHY_PIPE_LINE0_RESET_BIT  (0x1 << 19)
+
+#define PORT_MSI_CTRL_ADDR            0x820
+#define PORT_MSI_CTRL_UPPER_ADDR      0x824
+#define PORT_MSI_CTRL_INT0_ENABLE     0x828
+
+#define EYEPARAM_NOCFG 0xFFFFFFFF
+#define RAWLANEN_DIG_PCS_XF_TX_OVRD_IN_1 0x3001
+#define SUP_DIG_LVL_OVRD_IN 0xf
+#define LANEN_DIG_ASIC_TX_OVRD_IN_1 0x1002
+#define LANEN_DIG_ASIC_TX_OVRD_IN_2 0x1003
+
+/* hi3670 pciephy register */
+#define SOC_PCIEPHY_MMC1PLL_CTRL1  0xc04
+#define SOC_PCIEPHY_MMC1PLL_CTRL16 0xC40
+#define SOC_PCIEPHY_MMC1PLL_CTRL17 0xC44
+#define SOC_PCIEPHY_MMC1PLL_CTRL20 0xC50
+#define SOC_PCIEPHY_MMC1PLL_CTRL21 0xC54
+#define SOC_PCIEPHY_MMC1PLL_STAT0  0xE00
+
+#define CRGPERIPH_PEREN12   0x470
+#define CRGPERIPH_PERDIS12  0x474
+#define CRGPERIPH_PCIECTRL0 0x800
+
+/* define ie,oe cfg */
+#define IO_IE_EN_HARD_BYPASS         (0x1 << 27)
+#define IO_OE_EN_HARD_BYPASS         (0x1 << 11)
+#define IO_HARD_CTRL_DEBOUNCE_BYPASS (0x1 << 10)
+#define IO_OE_GT_MODE                (0x2 << 7)
+#define DEBOUNCE_WAITCFG_IN          (0xf << 20)
+#define DEBOUNCE_WAITCFG_OUT         (0xf << 13)
+
+/* noc power domain */
+#define NOC_POWER_IDLEREQ_1 0x38c
+#define NOC_POWER_IDLE_1    0x394
+#define NOC_PW_MASK         0x10000
+#define NOC_PW_SET_BIT      0x1
+
+/* Number of GPIOs required by PHY */
+#define MAX_GPIO_RESETS		4
+#define MAX_GPIO_CLKREQ		3
+#define NUM_EYEPARAM		5
+
+/* info located in sysctrl */
+#define SCTRL_PCIE_CMOS_OFFSET	0x60
+#define SCTRL_PCIE_CMOS_BIT	0x10
+#define SCTRL_PCIE_ISO_OFFSET	0x44
+#define SCTRL_PCIE_ISO_BIT	0x30
+#define SCTRL_PCIE_HPCLK_OFFSET	0x190
+#define SCTRL_PCIE_HPCLK_BIT	0x184000
+#define SCTRL_PCIE_OE_OFFSET	0x14a
+#define PCIE_DEBOUNCE_PARAM	0xF0F400
+#define PCIE_OE_BYPASS		(0x3 << 28)
+
+/* peri_crg ctrl */
+#define CRGCTRL_PCIE_ASSERT_OFFSET	0x88
+#define CRGCTRL_PCIE_ASSERT_BIT		0x8c000000
+
+/* Time for delay */
+#define REF_2_PERST_MIN		20000
+#define REF_2_PERST_MAX		25000
+#define PERST_2_ACCESS_MIN	10000
+#define PERST_2_ACCESS_MAX	12000
+#define PIPE_CLK_WAIT_MIN	550
+#define PIPE_CLK_WAIT_MAX	600
+#define TIME_CMOS_MIN		100
+#define TIME_CMOS_MAX		105
+#define TIME_PHY_PD_MIN		10
+#define TIME_PHY_PD_MAX		11
+
+struct hi3670_pcie_phy {
+	struct device	*dev;
+	void __iomem	*base;
+	struct regmap	*apb;
+	struct regmap	*crgctrl;
+	struct regmap	*sysctrl;
+	struct regmap	*pmctrl;
+	struct clk	*apb_sys_clk;
+	struct clk	*apb_phy_clk;
+	struct clk	*phy_ref_clk;
+	struct clk	*pcie_aclk;
+	struct clk	*pcie_aux_clk;
+	int		n_gpio_resets;
+	int		n_gpio_clkreq;
+	int		gpio_id_reset[MAX_GPIO_RESETS];
+	const char	*reset_names[MAX_GPIO_RESETS];
+	int		gpio_id_clkreq[MAX_GPIO_CLKREQ];
+	const char	*clkreq_names[MAX_GPIO_CLKREQ];
+	u32		eye_param[NUM_EYEPARAM];
+};
+
+
+/* Registers in PCIePHY */
+static inline void hi3670_apb_phy_writel(struct hi3670_pcie_phy *phy,
+					 u32 val, u32 reg)
+{
+	writel(val, phy->base + 0x40000 + reg);
+}
+
+static inline u32 hi3670_apb_phy_readl(struct hi3670_pcie_phy *phy, u32 reg)
+{
+	return readl(phy->base + 0x40000 + reg);
+}
+
+static inline void kirin_apb_natural_phy_writel(struct hi3670_pcie_phy *phy,
+						u32 val, u32 reg)
+{
+	writel(val, phy->base + reg * 4);
+}
+
+static inline u32 kirin_apb_natural_phy_readl(struct hi3670_pcie_phy *phy,
+					      u32 reg)
+{
+	return readl(phy->base + reg * 4);
+}
+
+static void hi3670_pcie_phy_oe_enable(struct hi3670_pcie_phy *phy)
+{
+	u32 val;
+
+	regmap_read(phy->sysctrl, SCTRL_PCIE_OE_OFFSET, &val);
+	val |= PCIE_DEBOUNCE_PARAM;
+	val &= ~PCIE_OE_BYPASS;
+	regmap_write(phy->sysctrl, SCTRL_PCIE_OE_OFFSET, val);
+}
+
+static void hi3670_pcie_get_eyeparam(struct hi3670_pcie_phy *phy)
+{
+	struct device *dev = phy->dev;
+	struct device_node *np;
+	int ret, i;
+
+	np = dev->of_node;
+
+	ret = of_property_read_u32_array(np, "hisilicon,eye-diagram-param",
+					 phy->eye_param, NUM_EYEPARAM);
+	if (!ret)
+		return;
+
+	/* There's no optional eye_param property. Set array to default */
+	for (i = 0; i < NUM_EYEPARAM; i++)
+		phy->eye_param[i] = EYEPARAM_NOCFG;
+}
+
+static void hi3670_pcie_set_eyeparam(struct hi3670_pcie_phy *phy)
+{
+	u32 val;
+
+	val = kirin_apb_natural_phy_readl(phy, RAWLANEN_DIG_PCS_XF_TX_OVRD_IN_1);
+
+	if (phy->eye_param[1] != EYEPARAM_NOCFG) {
+		val &= (~0xf00);
+		val |= (phy->eye_param[1] << 8) | (0x1 << 12);
+	}
+	kirin_apb_natural_phy_writel(phy, val, RAWLANEN_DIG_PCS_XF_TX_OVRD_IN_1);
+
+	val = kirin_apb_natural_phy_readl(phy, LANEN_DIG_ASIC_TX_OVRD_IN_2);
+	val &= (~0x1FBF);
+	if (phy->eye_param[2] != EYEPARAM_NOCFG)
+		val |= (phy->eye_param[2]<< 0) | (0x1 << 6);
+
+	if (phy->eye_param[3] != EYEPARAM_NOCFG)
+		val |= (phy->eye_param[3] << 7) | (0x1 << 13);
+
+	kirin_apb_natural_phy_writel(phy, val, LANEN_DIG_ASIC_TX_OVRD_IN_2);
+
+	val = kirin_apb_natural_phy_readl(phy, SUP_DIG_LVL_OVRD_IN);
+	if (phy->eye_param[0] != EYEPARAM_NOCFG) {
+		val &= (~0x1C0);
+		val |= (phy->eye_param[0] << 6) | (0x1 << 9);
+	}
+	kirin_apb_natural_phy_writel(phy, val, SUP_DIG_LVL_OVRD_IN);
+
+	val = kirin_apb_natural_phy_readl(phy, LANEN_DIG_ASIC_TX_OVRD_IN_1);
+	if (phy->eye_param[4] != EYEPARAM_NOCFG) {
+		val &= (~0x7E00);
+		val |= (phy->eye_param[4] << 9) | (0x1 << 15);
+	}
+	kirin_apb_natural_phy_writel(phy, val, LANEN_DIG_ASIC_TX_OVRD_IN_1);
+}
+
+static int hi3670_pcie_gpio_request(struct hi3670_pcie_phy *phy,
+				    struct device *dev)
+{
+	int ret, i;
+
+	for (i = 0; i < phy->n_gpio_resets; i++) {
+		if (!gpio_is_valid(phy->gpio_id_reset[i])) {
+			dev_err(dev, "unable to get a valid %s gpio\n",
+				phy->reset_names[i]);
+			return -ENODEV;
+		}
+
+		ret = devm_gpio_request(dev, phy->gpio_id_reset[i],
+					phy->reset_names[i]);
+		if (ret)
+			return ret;
+	}
+
+	for (i = 0; i < phy->n_gpio_clkreq; i++) {
+		if (!gpio_is_valid(phy->gpio_id_clkreq[i])) {
+			dev_err(dev, "unable to get a valid %s gpio\n",
+				phy->clkreq_names[i]);
+			return -ENODEV;
+		}
+
+		ret = devm_gpio_request(dev, phy->gpio_id_clkreq[i],
+					phy->clkreq_names[i]);
+		if (ret)
+			return ret;
+	}
+
+	return ret;
+}
+
+static void hi3670_pcie_natural_cfg(struct hi3670_pcie_phy *phy)
+{
+	u32 val;
+
+	/* change 2p mem_ctrl */
+	regmap_write(phy->apb, SOC_PCIECTRL_CTRL20_ADDR, 0x02605550);
+
+	/* pull up sys_aux_pwr_det */
+	regmap_read(phy->apb, SOC_PCIECTRL_CTRL7_ADDR, &val);
+	val |= (0x1 << 10);
+	regmap_write(phy->apb, SOC_PCIECTRL_CTRL7_ADDR, val);
+
+	/* output, pull down */
+	regmap_read(phy->apb, SOC_PCIECTRL_CTRL12_ADDR, &val);
+	val &= ~(0x3 << 2);
+	val |= (0x1 << 1);
+	val &= ~(0x1 << 0);
+	regmap_write(phy->apb, SOC_PCIECTRL_CTRL12_ADDR, val);
+
+	/* Handle phy_reset and lane0_reset to HW */
+	val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_CTRL1_ADDR);
+	val |= PCIEPHY_RESET_BIT;
+	val &= ~PCIEPHY_PIPE_LINE0_RESET_BIT;
+	hi3670_apb_phy_writel(phy, val, SOC_PCIEPHY_CTRL1_ADDR);
+
+	/* fix chip bug: TxDetectRx fail */
+	val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_CTRL38_ADDR);
+	val |= (0x1 << 2);
+	hi3670_apb_phy_writel(phy, val, SOC_PCIEPHY_CTRL38_ADDR);
+}
+
+static void hi3670_pcie_pll_init(struct hi3670_pcie_phy *phy)
+{
+	u32 val;
+
+	/* choose FNPLL */
+	val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_MMC1PLL_CTRL1);
+	val |= (0x1 << 27);
+	hi3670_apb_phy_writel(phy, val, SOC_PCIEPHY_MMC1PLL_CTRL1);
+
+	val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_MMC1PLL_CTRL16);
+	val &= 0xF000FFFF;
+	/* fnpll fbdiv = 0xD0 */
+	val |= (0xd0 << 16);
+	hi3670_apb_phy_writel(phy, val, SOC_PCIEPHY_MMC1PLL_CTRL16);
+
+	val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_MMC1PLL_CTRL17);
+	val &= 0xFF000000;
+	/* fnpll fracdiv = 0x555555 */
+	val |= (0x555555 << 0);
+	hi3670_apb_phy_writel(phy, val, SOC_PCIEPHY_MMC1PLL_CTRL17);
+
+	val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_MMC1PLL_CTRL20);
+	val &= 0xF5FF88FF;
+	/* fnpll dll_en = 0x1 */
+	val |= (0x1 << 27);
+	/* fnpll postdiv1 = 0x5 */
+	val |= (0x5 << 8);
+	/* fnpll postdiv2 = 0x4 */
+	val |= (0x4 << 12);
+	/* fnpll pll_mode = 0x0 */
+	val &= ~(0x1 << 25);
+	hi3670_apb_phy_writel(phy, val, SOC_PCIEPHY_MMC1PLL_CTRL20);
+
+	hi3670_apb_phy_writel(phy, 0x20, SOC_PCIEPHY_MMC1PLL_CTRL21);
+}
+
+static int hi3670_pcie_pll_ctrl(struct hi3670_pcie_phy *phy, bool enable)
+{
+	struct device *dev = phy->dev;
+	u32 val;
+	int time = 200;
+
+	if (enable) {
+		/* pd = 0 */
+		val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_MMC1PLL_CTRL16);
+		val &= ~(0x1 << 0);
+		hi3670_apb_phy_writel(phy, val, SOC_PCIEPHY_MMC1PLL_CTRL16);
+
+		val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_MMC1PLL_STAT0);
+
+		/* choose FNPLL */
+		while (!(val & 0x10)) {
+			if (!time) {
+				dev_err(dev, "wait for pll_lock timeout\n");
+				return -1;
+			}
+			time --;
+			udelay(1);
+			val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_MMC1PLL_STAT0);
+		}
+
+		/* pciepll_bp = 0 */
+		val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_MMC1PLL_CTRL20);
+		val &= ~(0x1 << 16);
+		hi3670_apb_phy_writel(phy, val, SOC_PCIEPHY_MMC1PLL_CTRL20);
+
+	} else {
+		/* pd = 1 */
+		val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_MMC1PLL_CTRL16);
+		val |= (0x1 << 0);
+		hi3670_apb_phy_writel(phy, val, SOC_PCIEPHY_MMC1PLL_CTRL16);
+
+		/* pciepll_bp = 1 */
+		val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_MMC1PLL_CTRL20);
+		val |= (0x1 << 16);
+		hi3670_apb_phy_writel(phy, val, SOC_PCIEPHY_MMC1PLL_CTRL20);
+	}
+
+	 return 0;
+}
+
+static void hi3670_pcie_hp_debounce_gt(struct hi3670_pcie_phy *phy, bool open)
+{
+	if (open)
+		/* gt_clk_pcie_hp/gt_clk_pcie_debounce open */
+		regmap_write(phy->crgctrl, CRGPERIPH_PEREN12, 0x9000);
+	else
+		/* gt_clk_pcie_hp/gt_clk_pcie_debounce close */
+		regmap_write(phy->crgctrl, CRGPERIPH_PERDIS12, 0x9000);
+}
+
+static void hi3670_pcie_phyref_gt(struct hi3670_pcie_phy *phy, bool open)
+{
+	unsigned int val;
+
+	regmap_read(phy->crgctrl, CRGPERIPH_PCIECTRL0, &val);
+
+	if (open)
+		val &= ~(0x1 << 1); //enable hard gt mode
+	else
+		val |= (0x1 << 1); //disable hard gt mode
+
+	regmap_write(phy->crgctrl, CRGPERIPH_PCIECTRL0, val);
+
+	/* disable soft gt mode */
+	regmap_write(phy->crgctrl, CRGPERIPH_PERDIS12, 0x4000);
+}
+
+static void hi3670_pcie_oe_ctrl(struct hi3670_pcie_phy *phy, bool en_flag)
+{
+	unsigned int val;
+
+	regmap_read(phy->crgctrl , CRGPERIPH_PCIECTRL0, &val);
+
+	/* set ie cfg */
+	val |= IO_IE_EN_HARD_BYPASS;
+
+	/* set oe cfg */
+	val &= ~IO_HARD_CTRL_DEBOUNCE_BYPASS;
+
+	/* set phy_debounce in&out time */
+	val |= (DEBOUNCE_WAITCFG_IN | DEBOUNCE_WAITCFG_OUT);
+
+	/* select oe_gt_mode */
+	val |= IO_OE_GT_MODE;
+
+	if (en_flag)
+		val &= ~IO_OE_EN_HARD_BYPASS;
+	else
+		val |= IO_OE_EN_HARD_BYPASS;
+
+	regmap_write(phy->crgctrl, CRGPERIPH_PCIECTRL0, val);
+}
+
+static void hi3670_pcie_ioref_gt(struct hi3670_pcie_phy *phy, bool open)
+{
+	unsigned int val;
+
+	if (open) {
+		regmap_write(phy->apb, SOC_PCIECTRL_CTRL21_ADDR, 0x20000070);
+
+		hi3670_pcie_oe_ctrl(phy, true);
+
+		/* en hard gt mode */
+		regmap_read(phy->crgctrl, CRGPERIPH_PCIECTRL0, &val);
+		val &= ~(0x1 << 0);
+		regmap_write(phy->crgctrl, CRGPERIPH_PCIECTRL0, val);
+
+		/* disable soft gt mode */
+		regmap_write(phy->crgctrl, CRGPERIPH_PERDIS12, 0x2000);
+
+	} else {
+		/* disable hard gt mode */
+		regmap_read(phy->crgctrl, CRGPERIPH_PCIECTRL0, &val);
+		val |= (0x1 << 0);
+		regmap_write(phy->crgctrl, CRGPERIPH_PCIECTRL0, val);
+
+		/* disable soft gt mode */
+		regmap_write(phy->crgctrl, CRGPERIPH_PERDIS12, 0x2000);
+
+		hi3670_pcie_oe_ctrl(phy, false);
+       }
+}
+
+static int hi3670_pcie_allclk_ctrl(struct hi3670_pcie_phy *phy, bool clk_on)
+{
+	struct device *dev = phy->dev;
+	u32 val;
+	int ret = 0;
+
+	if (!clk_on)
+		goto close_clocks;
+
+	/* choose 100MHz clk src: Bit[8]==1 pad, Bit[8]==0 pll */
+	val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_CTRL1_ADDR);
+	val &= ~(0x1 << 8);
+	hi3670_apb_phy_writel(phy, val, SOC_PCIEPHY_CTRL1_ADDR);
+
+	hi3670_pcie_pll_init(phy);
+
+	ret = hi3670_pcie_pll_ctrl(phy, true);
+	if (ret) {
+		dev_err(dev, "Failed to enable pll\n");
+		return -1;
+	}
+	hi3670_pcie_hp_debounce_gt(phy, true);
+	hi3670_pcie_phyref_gt(phy, true);
+	hi3670_pcie_ioref_gt(phy, true);
+
+	ret = clk_set_rate(phy->pcie_aclk, AXI_CLK_FREQ);
+	if (ret) {
+		dev_err(dev, "Failed to set rate\n");
+		goto close_clocks;
+	}
+
+	return 0;
+
+close_clocks:
+	hi3670_pcie_ioref_gt(phy, false);
+	hi3670_pcie_phyref_gt(phy, false);
+	hi3670_pcie_hp_debounce_gt(phy, false);
+
+	hi3670_pcie_pll_ctrl(phy, false);
+
+	return ret;
+}
+
+static bool is_pipe_clk_stable(struct hi3670_pcie_phy *phy)
+{
+	struct device *dev = phy->dev;
+	u32 val;
+	u32 time = 100;
+	u32 pipe_clk_stable = 0x1 << 19;
+
+	val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_STATE0_ADDR);
+	while (val & pipe_clk_stable) {
+		mdelay(1);
+		if (time == 0) {
+			dev_err(dev, "PIPE clk is not stable\n");
+			return false;
+		}
+		time--;
+		val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_STATE0_ADDR);
+	}
+
+	return true;
+}
+
+static int hi3670_pcie_noc_power(struct hi3670_pcie_phy *phy, bool enable)
+{
+	struct device *dev = phy->dev;
+	u32 time = 100;
+	unsigned int val = NOC_PW_MASK;
+	int rst;
+
+	if (enable)
+		val = NOC_PW_MASK | NOC_PW_SET_BIT;
+	else
+		val = NOC_PW_MASK;
+	rst = enable ? 1 : 0;
+
+	regmap_write(phy->pmctrl, NOC_POWER_IDLEREQ_1, val);
+
+	time = 100;
+	regmap_read(phy->pmctrl, NOC_POWER_IDLE_1, &val);
+	while((val & NOC_PW_SET_BIT) != rst) {
+		udelay(10);
+		if (!time) {
+			dev_err(dev, "Failed to reverse noc power-status\n");
+			return -1;
+		}
+		time--;
+		regmap_read(phy->pmctrl, NOC_POWER_IDLE_1, &val);
+	}
+
+	return 0;
+}
+
+static int hi3670_pcie_get_apb(struct hi3670_pcie_phy *phy)
+{
+	struct device_node *pcie_port;
+	struct device *dev = phy->dev;
+	struct device *pcie_dev;
+
+	pcie_port = of_get_child_by_name(dev->parent->of_node, "pcie");
+	if (!pcie_port) {
+		dev_err(dev, "no pcie node found in %s\n",
+			dev->parent->of_node->full_name);
+		return -ENODEV;
+	}
+
+	pcie_dev = bus_find_device_by_of_node(&platform_bus_type, pcie_port);
+	if (!pcie_dev) {
+                dev_err(dev, "Didn't find pcie device\n");
+                return -ENODEV;
+        }
+
+        /*
+	 * We might just use NULL instead of the APB name, as the
+	 * pcie-kirin currently registers directly just one regmap (although
+	 * the DWC driver register other regmaps).
+	 *
+	 * Yet, it sounds safer to warrant that it will be accessing the
+	 * right regmap. So, let's use the named version.
+	 */
+	phy->apb = dev_get_regmap(pcie_dev, "kirin_pcie_apb");
+	if (!phy->apb) {
+		dev_err(dev, "Failed to get APB regmap\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+
+static int kirin_pcie_clk_ctrl(struct hi3670_pcie_phy *phy, bool enable)
+{
+	int ret = 0;
+
+	if (!enable)
+		goto close_clk;
+
+	ret = clk_set_rate(phy->phy_ref_clk, REF_CLK_FREQ);
+	if (ret)
+		return ret;
+
+	ret = clk_prepare_enable(phy->phy_ref_clk);
+	if (ret)
+		return ret;
+
+	ret = clk_prepare_enable(phy->apb_sys_clk);
+	if (ret)
+		goto apb_sys_fail;
+
+	ret = clk_prepare_enable(phy->apb_phy_clk);
+	if (ret)
+		goto apb_phy_fail;
+
+	ret = clk_prepare_enable(phy->pcie_aclk);
+	if (ret)
+		goto aclk_fail;
+
+	ret = clk_prepare_enable(phy->pcie_aux_clk);
+	if (ret)
+		goto aux_clk_fail;
+
+	return 0;
+
+close_clk:
+	clk_disable_unprepare(phy->pcie_aux_clk);
+aux_clk_fail:
+	clk_disable_unprepare(phy->pcie_aclk);
+aclk_fail:
+	clk_disable_unprepare(phy->apb_phy_clk);
+apb_phy_fail:
+	clk_disable_unprepare(phy->apb_sys_clk);
+apb_sys_fail:
+	clk_disable_unprepare(phy->phy_ref_clk);
+
+	return ret;
+}
+
+static int hi3670_pcie_phy_init(struct phy *generic_phy)
+{
+	struct hi3670_pcie_phy *phy = phy_get_drvdata(generic_phy);
+	struct device *dev = phy->dev;
+	int ret;
+
+	/*
+	 * The code under hi3670_pcie_get_apb() need to access the
+	 * DWC APB registers. So, get them from
+	 * the pcie driver's regmap (see pcie-kirin regmap).
+	 *
+	 * Such kind of resource can only be obtained during the PCIe
+	 * power_on sequence, as the code inside pcie-kirin needs to
+	 * be already probed, as it needs to register the APB regmap.
+	 */
+
+	ret = hi3670_pcie_get_apb(phy);
+	if (ret)
+		return ret;
+
+	/* phy regulator needs to be powered on before calling it */
+	return hi3670_pcie_gpio_request(phy, dev);
+}
+
+static int hi3670_pcie_phy_power_on(struct phy *generic_phy)
+{
+	struct hi3670_pcie_phy *phy = phy_get_drvdata(generic_phy);
+	int val, ret, i;
+
+	/* Power supply for Host */
+	regmap_write(phy->sysctrl,
+		     SCTRL_PCIE_CMOS_OFFSET, SCTRL_PCIE_CMOS_BIT);
+	usleep_range(TIME_CMOS_MIN, TIME_CMOS_MAX);
+
+	hi3670_pcie_phy_oe_enable(phy);
+
+	for (i = 0; i < phy->n_gpio_clkreq; i++) {
+		ret = gpio_direction_output(phy->gpio_id_clkreq[i], 0);
+		if (ret)
+			return ret;
+	}
+
+	ret = kirin_pcie_clk_ctrl(phy, true);
+	if (ret)
+		return ret;
+
+	/* ISO disable, PCIeCtrl, PHY assert and clk gate clear */
+	regmap_write(phy->sysctrl,
+		     SCTRL_PCIE_ISO_OFFSET, SCTRL_PCIE_ISO_BIT);
+	regmap_write(phy->crgctrl,
+		     CRGCTRL_PCIE_ASSERT_OFFSET, CRGCTRL_PCIE_ASSERT_BIT);
+	regmap_write(phy->sysctrl,
+		     SCTRL_PCIE_HPCLK_OFFSET, SCTRL_PCIE_HPCLK_BIT);
+
+	hi3670_pcie_natural_cfg(phy);
+
+	ret = hi3670_pcie_allclk_ctrl(phy, true);
+	if (ret)
+		goto disable_clks;
+
+	/* pull down phy_test_powerdown signal */
+	val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_CTRL0_ADDR);
+	val &= ~(0x1 << 22);
+	hi3670_apb_phy_writel(phy, val, SOC_PCIEPHY_CTRL0_ADDR);
+
+	/* deassert controller perst_n */
+	regmap_read(phy->apb, SOC_PCIECTRL_CTRL12_ADDR, &val);
+	val |= (0x1 << 2);
+	regmap_write(phy->apb, SOC_PCIECTRL_CTRL12_ADDR, val);
+	udelay(10);
+
+	/* perst assert Endpoints */
+	usleep_range(21000, 23000);
+	for (i = 0; i < phy->n_gpio_resets; i++) {
+		ret = gpio_direction_output(phy->gpio_id_reset[i], 1);
+		if (ret)
+			return ret;
+	}
+	usleep_range(10000, 11000);
+
+	ret = is_pipe_clk_stable(phy);
+	if (!ret)
+		goto disable_clks;
+
+	hi3670_pcie_set_eyeparam(phy);
+
+	ret = hi3670_pcie_noc_power(phy, false);
+	if (ret)
+		goto disable_clks;
+
+	return 0;
+
+disable_clks:
+	kirin_pcie_clk_ctrl(phy, false);
+	return ret;
+}
+
+static int hi3670_pcie_phy_power_off(struct phy *generic_phy)
+{
+	struct hi3670_pcie_phy *phy = phy_get_drvdata(generic_phy);
+
+	/* Drop power supply for Host */
+	regmap_write(phy->sysctrl, SCTRL_PCIE_CMOS_OFFSET, 0x00);
+
+	kirin_pcie_clk_ctrl(phy, false);
+
+	return 0;
+}
+
+static const struct phy_ops hi3670_phy_ops = {
+	.init		= hi3670_pcie_phy_init,
+	.power_on	= hi3670_pcie_phy_power_on,
+	.power_off	= hi3670_pcie_phy_power_off,
+	.owner		= THIS_MODULE,
+};
+
+static int hi3670_pcie_phy_get_resources(struct hi3670_pcie_phy *phy,
+					 struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	char name[32];
+	int i;
+
+	/* syscon */
+	phy->crgctrl = syscon_regmap_lookup_by_compatible("hisilicon,hi3670-crgctrl");
+	if (IS_ERR(phy->crgctrl))
+		return PTR_ERR(phy->crgctrl);
+
+	phy->sysctrl = syscon_regmap_lookup_by_compatible("hisilicon,hi3670-sctrl");
+	if (IS_ERR(phy->sysctrl))
+		return PTR_ERR(phy->sysctrl);
+
+	phy->pmctrl = syscon_regmap_lookup_by_compatible("hisilicon,hi3670-pmctrl");
+	if (IS_ERR(phy->sysctrl))
+		return PTR_ERR(phy->sysctrl);
+
+	/* clocks */
+	phy->phy_ref_clk = devm_clk_get(dev, "pcie_phy_ref");
+	if (IS_ERR(phy->phy_ref_clk))
+		return PTR_ERR(phy->phy_ref_clk);
+
+	phy->pcie_aux_clk = devm_clk_get(dev, "pcie_aux");
+	if (IS_ERR(phy->pcie_aux_clk))
+		return PTR_ERR(phy->pcie_aux_clk);
+
+	phy->apb_phy_clk = devm_clk_get(dev, "pcie_apb_phy");
+	if (IS_ERR(phy->apb_phy_clk))
+		return PTR_ERR(phy->apb_phy_clk);
+
+	phy->apb_sys_clk = devm_clk_get(dev, "pcie_apb_sys");
+	if (IS_ERR(phy->apb_sys_clk))
+		return PTR_ERR(phy->apb_sys_clk);
+
+	phy->pcie_aclk = devm_clk_get(dev, "pcie_aclk");
+	if (IS_ERR(phy->pcie_aclk))
+		return PTR_ERR(phy->pcie_aclk);
+
+	/* registers */
+	phy->base = devm_platform_ioremap_resource_byname(pdev, "phy");
+	if (IS_ERR(phy->base))
+		return PTR_ERR(phy->base);
+
+	/* perst reset gpios */
+	phy->n_gpio_resets = of_gpio_named_count(np, "reset-gpios");
+	if (phy->n_gpio_resets > MAX_GPIO_RESETS) {
+		dev_err(dev, "Too many GPIO resets!\n");
+		return -EINVAL;
+	}
+	for (i = 0; i < phy->n_gpio_resets; i++) {
+		phy->gpio_id_reset[i] = of_get_named_gpio(dev->of_node,
+							  "reset-gpios", i);
+		if (phy->gpio_id_reset[i] < 0)
+			return phy->gpio_id_reset[i];
+
+		sprintf(name, "pcie_perst_%d", i);
+
+		phy->reset_names[i] = devm_kstrdup_const(dev, name,
+							 GFP_KERNEL);
+		if (!phy->reset_names[i])
+			return -ENOMEM;
+	}
+
+	/* clock request gpios */
+	phy->n_gpio_clkreq = of_gpio_named_count(np, "clkreq-gpios");
+	if (phy->n_gpio_clkreq > MAX_GPIO_CLKREQ) {
+		dev_err(dev, "Too many GPIO clock requests!\n");
+		return -EINVAL;
+	}
+	for (i = 0; i < phy->n_gpio_clkreq; i++) {
+		phy->gpio_id_clkreq[i] = of_get_named_gpio(dev->of_node,
+							   "clkreq-gpios", i);
+		if (phy->gpio_id_clkreq[i] < 0)
+			return phy->gpio_id_clkreq[i];
+
+		sprintf(name, "pcie_clkreq_%d", i);
+		phy->clkreq_names[i] = devm_kstrdup_const(dev, name,
+							  GFP_KERNEL);
+		if (!phy->clkreq_names[i])
+			return -ENOMEM;
+	}
+
+	hi3670_pcie_get_eyeparam(phy);
+
+	return 0;
+}
+
+static int hi3670_pcie_phy_probe(struct platform_device *pdev)
+{
+	struct phy_provider *phy_provider;
+	struct device *dev = &pdev->dev;
+	struct hi3670_pcie_phy *phy;
+	struct phy *generic_phy;
+	int ret;
+
+	phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
+	if (!phy)
+		return -ENOMEM;
+
+	phy->dev = dev;
+
+	ret = hi3670_pcie_phy_get_resources(phy, pdev);
+	if (ret)
+		return ret;
+
+	generic_phy = devm_phy_create(dev, dev->of_node, &hi3670_phy_ops);
+	if (IS_ERR(generic_phy)) {
+		dev_err(dev, "failed to create PHY\n");
+		return PTR_ERR(generic_phy);
+	}
+
+	phy_set_drvdata(generic_phy, phy);
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id hi3670_pcie_phy_match[] = {
+	{
+		.compatible = "hisilicon,hi970-pcie-phy",
+	},
+	{},
+};
+
+static struct platform_driver hi3670_pcie_phy_driver = {
+	.probe	= hi3670_pcie_phy_probe,
+	.driver = {
+		.of_match_table	= hi3670_pcie_phy_match,
+		.name		= "hi3670_pcie_phy",
+		.suppress_bind_attrs = true,
+	}
+};
+builtin_platform_driver(hi3670_pcie_phy_driver);
-- 
2.31.1


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

  parent reply	other threads:[~2021-07-13  6:29 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-13  6:28 [PATCH v5 0/8] Add support for Hikey 970 PCIe Mauro Carvalho Chehab
2021-07-13  6:28 ` Mauro Carvalho Chehab
2021-07-13  6:28 ` Mauro Carvalho Chehab
2021-07-13  6:28 ` [PATCH v5 1/8] dt-bindings: phy: Add bindings for HiKey 960 PCIe PHY Mauro Carvalho Chehab
2021-07-13  6:28   ` Mauro Carvalho Chehab
2021-07-14  2:22   ` Rob Herring
2021-07-14  2:22     ` Rob Herring
2021-07-13  6:28 ` [PATCH v5 2/8] dt-bindings: phy: Add bindings for HiKey 970 " Mauro Carvalho Chehab
2021-07-13  6:28   ` Mauro Carvalho Chehab
2021-07-14  2:26   ` Rob Herring
2021-07-14  2:26     ` Rob Herring
2021-07-14  7:14     ` Mauro Carvalho Chehab
2021-07-14  7:14       ` Mauro Carvalho Chehab
2021-07-14 14:17       ` Rob Herring
2021-07-14 14:17         ` Rob Herring
2021-07-14 14:31         ` Mauro Carvalho Chehab
2021-07-14 14:31           ` Mauro Carvalho Chehab
2021-07-14 17:42       ` Manivannan Sadhasivam
2021-07-14 17:42         ` Manivannan Sadhasivam
2021-07-15  6:37         ` Mauro Carvalho Chehab
2021-07-15  6:37           ` Mauro Carvalho Chehab
2021-07-19 15:26           ` Mauro Carvalho Chehab
2021-07-19 15:26             ` Mauro Carvalho Chehab
2021-07-27  8:11         ` Mauro Carvalho Chehab
2021-07-27  8:11           ` Mauro Carvalho Chehab
2021-07-13  6:28 ` [PATCH v5 3/8] dt-bindings: PCI: kirin: Fix compatible string Mauro Carvalho Chehab
2021-07-14  2:27   ` Rob Herring
2021-07-13  6:28 ` [PATCH v5 4/8] dt-bindings: PCI: kirin: Drop PHY properties Mauro Carvalho Chehab
2021-07-14  2:28   ` Rob Herring
2021-07-14 11:22     ` Mauro Carvalho Chehab
2021-07-16 11:22     ` Mauro Carvalho Chehab
2021-07-13  6:28 ` [PATCH v5 5/8] phy: HiSilicon: Add driver for Kirin 960 PCIe PHY Mauro Carvalho Chehab
2021-07-13  6:28   ` Mauro Carvalho Chehab
2021-07-13  6:28 ` Mauro Carvalho Chehab [this message]
2021-07-13  6:28   ` [PATCH v5 6/8] phy: HiSilicon: add driver for Kirin 970 " Mauro Carvalho Chehab
2021-07-13  6:28 ` [PATCH v5 7/8] PCI: kirin: Drop the PHY logic from the driver Mauro Carvalho Chehab
2021-07-13  6:28   ` Mauro Carvalho Chehab
2021-07-13  6:28 ` [PATCH v5 8/8] PCI: kirin: Use regmap for APB registers Mauro Carvalho Chehab

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=d550a488cbd9a96372e3ef19d57b514c1cbf204b.1626157454.git.mchehab+huawei@kernel.org \
    --to=mchehab+huawei@kernel.org \
    --cc=bhelgaas@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=helgaas@kernel.org \
    --cc=kishon@ti.com \
    --cc=kw@linux.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=linuxarm@huawei.com \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=mani@kernel.org \
    --cc=mauro.chehab@huawei.com \
    --cc=robh+dt@kernel.org \
    --cc=robh@kernel.org \
    --cc=songxiaowei@hisilicon.com \
    --cc=vkoul@kernel.org \
    --cc=wangbinghui@hisilicon.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.