[v3,4/5] dma: imx-sdma: add an index for imx8mq multi sdma devices

[Angus Ainslie <angus@akkea.ca>]

On 2019-01-23 08:31, Lucas Stach wrote:
> Hi Angus,
> 
> Am Mittwoch, den 23.01.2019, 08:23 -0700 schrieb Angus Ainslie 
> (Purism):
>> On i.mx8mq, there are two sdma instances, and the common dma framework
>> will get a channel dynamically from any available sdma instance 
>> whether
>> it's the first sdma device or the second sdma device. Some IPs like
>> SAI only work with sdma2 not sdma1. To make sure the sdma channel is 
>> from
>> the correct sdma device, use an index to match.
>> 
>> Based on MLK-16104-2 by Robin Gong <yibin.gong@nxp.com>
> 
> This relies on the probe order of the devices (which should be treated
> as random) for the match to find the right device. This is not
> acceptable upstream.
> 
> The DT "dmas" property already specifies the correct SDMA device to use
>  for a consumer, so the filter function should really match the OF node
> of the SDMA device with the node specified in the dmas phandle in order
> to pick the right SDMA engine.
> 

Thanks Lucas, I'll fix it for rev 4

> Regards,
> Lucas
> 
>> 
>> > Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
>> ---
>>  drivers/dma/imx-sdma.c                | 12 ++++++++++++
>>  include/linux/platform_data/dma-imx.h |  1 +
>>  2 files changed, 13 insertions(+)
>> 
>> diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
>> index 2e691b1cd0eb..bf3752a6a64f 100644
>> --- a/drivers/dma/imx-sdma.c
>> +++ b/drivers/dma/imx-sdma.c
>> @@ -442,6 +442,7 @@ struct sdma_engine {
>> > >  	struct sdma_buffer_descriptor	*bd0;
>> >  	/* clock ratio for AHB:SDMA core. 1:1 is 1, 2:1 is 0*/
>> > >  	bool				clk_ratio;
>> > > +	int				idx;
>>  };
>>  
>>  static int sdma_config_write(struct dma_chan *chan,
>> @@ -606,6 +607,8 @@ static const struct of_device_id sdma_dt_ids[] = {
>>  };
>>  MODULE_DEVICE_TABLE(of, sdma_dt_ids);
>>  
>> +static int sdma_dev_idx;
>> +
>> >  #define SDMA_H_CONFIG_DSPDMA	BIT(12) /* indicates if the DSPDMA is used */
>> >  #define SDMA_H_CONFIG_RTD_PINS	BIT(11) /* indicates if Real-Time Debug pins are enabled */
>> >  #define SDMA_H_CONFIG_ACR	BIT(4)  /* indicates if AHB freq /core freq = 2 or 1 */
>> @@ -1934,6 +1937,11 @@ static bool sdma_filter_fn(struct dma_chan 
>> *chan, void *fn_param)
>> >  	if (!imx_dma_is_general_purpose(chan))
>> >  		return false;
>>  
>> > +	/* return false if it's not the right device */
>> > +	if ((sdmac->sdma->drvdata == &sdma_imx8mq)
>> > +		&& (sdmac->sdma->idx != data->idx))
>> > +		return false;
>> +
>> >  	sdmac->data = *data;
>> >  	chan->private = &sdmac->data;
>>  
>> @@ -1961,6 +1969,7 @@ static struct dma_chan *sdma_xlate(struct 
>> of_phandle_args *dma_spec,
>> >  	 * be set to sdmac->event_id1.
>> >  	 */
>> >  	data.dma_request2 = 0;
>> > +	data.idx = sdma->idx;
>>  
>> >  	return dma_request_channel(mask, sdma_filter_fn, &data);
>>  }
>> @@ -2149,6 +2158,9 @@ static int sdma_probe(struct platform_device 
>> *pdev)
>> >  		of_node_put(spba_bus);
>> >  	}
>>  
>> > +	/* There maybe multi sdma devices such as i.mx8mq */
>> > +	sdma->idx = sdma_dev_idx++;
>> +
>> >  	return 0;
>>  
>>  err_register:
>> diff --git a/include/linux/platform_data/dma-imx.h 
>> b/include/linux/platform_data/dma-imx.h
>> index 7d964e787299..843faf081282 100644
>> --- a/include/linux/platform_data/dma-imx.h
>> +++ b/include/linux/platform_data/dma-imx.h
>> @@ -55,6 +55,7 @@ struct imx_dma_data {
>> >  	int dma_request2; /* secondary DMA request line */
>> >  	enum sdma_peripheral_type peripheral_type;
>> >  	int priority;
>> > +	int idx;
>>  };
>>  
>>  static inline int imx_dma_is_ipu(struct dma_chan *chan)