All of lore.kernel.org
 help / color / mirror / Atom feed
From: Marcel Ziswiler <marcel@ziswiler.com>
To: swarren@wwwdotorg.org, thierry.reding@gmail.com
Cc: devicetree@vger.kernel.org, linux@arm.linux.org.uk,
	linux-kernel@vger.kernel.org, stefan@agner.ch,
	Marcel Ziswiler <marcel@ziswiler.com>,
	linux-tegra@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 2/3] arm: tegra: enable igb, stmpe, i2c chardev, lm95245, pwm leds
Date: Tue, 10 Jun 2014 00:52:45 +0200	[thread overview]
Message-ID: <dadd07f9ed693d6bcf541764b62a2caf4cc38630.1402353627.git.marcel@ziswiler.com> (raw)

The NVIDIA Tegra 3 based Apalis T30 module contains an Intel i210 resp.
i211 gigabit Ethernet controller, an STMPE811 ADC/touch controller, I2C
buses and PWM LEDs generically accessible from user space and an
LM95245 temperature sensor chip. The later four can also be found on
the Colibri T30 module.

While at it move the PCA953x GPIO entry down to its proper place to
have it all nicely ordered again.

Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
---
Changes since v1:
- Forget about spidev for now.

 arch/arm/configs/tegra_defconfig |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig
index fb25e29..d05eec8 100644
--- a/arch/arm/configs/tegra_defconfig
+++ b/arch/arm/configs/tegra_defconfig
@@ -23,7 +23,6 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_PARTITION_ADVANCED=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_GPIO_PCA953X=y
 CONFIG_ARCH_TEGRA=y
 CONFIG_ARCH_TEGRA_2x_SOC=y
 CONFIG_ARCH_TEGRA_3x_SOC=y
@@ -111,6 +110,7 @@ CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
+CONFIG_IGB=y
 CONFIG_R8169=y
 CONFIG_USB_PEGASUS=y
 CONFIG_USB_USBNET=y
@@ -125,6 +125,8 @@ CONFIG_KEYBOARD_GPIO=y
 CONFIG_KEYBOARD_TEGRA=y
 CONFIG_KEYBOARD_CROS_EC=y
 CONFIG_MOUSE_PS2_ELANTECH=y
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_STMPE=y
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_MPU3050=y
 # CONFIG_LEGACY_PTYS is not set
@@ -135,6 +137,7 @@ CONFIG_SERIAL_TEGRA=y
 CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_HW_RANDOM is not set
 # CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_MUX_PCA954x=y
 CONFIG_I2C_MUX_PINCTRL=y
 CONFIG_I2C_TEGRA=y
@@ -144,6 +147,7 @@ CONFIG_SPI_TEGRA20_SFLASH=y
 CONFIG_SPI_TEGRA20_SLINK=y
 CONFIG_PINCTRL_AS3722=y
 CONFIG_PINCTRL_PALMAS=y
+CONFIG_GPIO_PCA953X=y
 CONFIG_GPIO_PCA953X_IRQ=y
 CONFIG_GPIO_PALMAS=y
 CONFIG_GPIO_TPS6586X=y
@@ -155,10 +159,12 @@ CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_AS3722=y
 CONFIG_POWER_RESET_GPIO=y
 CONFIG_SENSORS_LM90=y
+CONFIG_SENSORS_LM95245=y
 CONFIG_MFD_AS3722=y
 CONFIG_MFD_CROS_EC=y
 CONFIG_MFD_CROS_EC_SPI=y
 CONFIG_MFD_MAX8907=y
+CONFIG_MFD_STMPE=y
 CONFIG_MFD_PALMAS=y
 CONFIG_MFD_TPS65090=y
 CONFIG_MFD_TPS6586X=y
@@ -221,6 +227,7 @@ CONFIG_MMC_SDHCI_TEGRA=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_PWM=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_ONESHOT=y
-- 
1.7.9.5

WARNING: multiple messages have this Message-ID (diff)
From: Marcel Ziswiler <marcel@ziswiler.com>
To: swarren@wwwdotorg.org, thierry.reding@gmail.com
Cc: linux@arm.linux.org.uk, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-tegra@vger.kernel.org,
	stefan@agner.ch, Marcel Ziswiler <marcel@ziswiler.com>
Subject: [PATCH v2 2/3] arm: tegra: enable igb, stmpe, i2c chardev, lm95245, pwm leds
Date: Tue, 10 Jun 2014 00:52:45 +0200	[thread overview]
Message-ID: <dadd07f9ed693d6bcf541764b62a2caf4cc38630.1402353627.git.marcel@ziswiler.com> (raw)

The NVIDIA Tegra 3 based Apalis T30 module contains an Intel i210 resp.
i211 gigabit Ethernet controller, an STMPE811 ADC/touch controller, I2C
buses and PWM LEDs generically accessible from user space and an
LM95245 temperature sensor chip. The later four can also be found on
the Colibri T30 module.

While at it move the PCA953x GPIO entry down to its proper place to
have it all nicely ordered again.

Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
---
Changes since v1:
- Forget about spidev for now.

 arch/arm/configs/tegra_defconfig |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig
index fb25e29..d05eec8 100644
--- a/arch/arm/configs/tegra_defconfig
+++ b/arch/arm/configs/tegra_defconfig
@@ -23,7 +23,6 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_PARTITION_ADVANCED=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_GPIO_PCA953X=y
 CONFIG_ARCH_TEGRA=y
 CONFIG_ARCH_TEGRA_2x_SOC=y
 CONFIG_ARCH_TEGRA_3x_SOC=y
@@ -111,6 +110,7 @@ CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
+CONFIG_IGB=y
 CONFIG_R8169=y
 CONFIG_USB_PEGASUS=y
 CONFIG_USB_USBNET=y
@@ -125,6 +125,8 @@ CONFIG_KEYBOARD_GPIO=y
 CONFIG_KEYBOARD_TEGRA=y
 CONFIG_KEYBOARD_CROS_EC=y
 CONFIG_MOUSE_PS2_ELANTECH=y
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_STMPE=y
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_MPU3050=y
 # CONFIG_LEGACY_PTYS is not set
@@ -135,6 +137,7 @@ CONFIG_SERIAL_TEGRA=y
 CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_HW_RANDOM is not set
 # CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_MUX_PCA954x=y
 CONFIG_I2C_MUX_PINCTRL=y
 CONFIG_I2C_TEGRA=y
@@ -144,6 +147,7 @@ CONFIG_SPI_TEGRA20_SFLASH=y
 CONFIG_SPI_TEGRA20_SLINK=y
 CONFIG_PINCTRL_AS3722=y
 CONFIG_PINCTRL_PALMAS=y
+CONFIG_GPIO_PCA953X=y
 CONFIG_GPIO_PCA953X_IRQ=y
 CONFIG_GPIO_PALMAS=y
 CONFIG_GPIO_TPS6586X=y
@@ -155,10 +159,12 @@ CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_AS3722=y
 CONFIG_POWER_RESET_GPIO=y
 CONFIG_SENSORS_LM90=y
+CONFIG_SENSORS_LM95245=y
 CONFIG_MFD_AS3722=y
 CONFIG_MFD_CROS_EC=y
 CONFIG_MFD_CROS_EC_SPI=y
 CONFIG_MFD_MAX8907=y
+CONFIG_MFD_STMPE=y
 CONFIG_MFD_PALMAS=y
 CONFIG_MFD_TPS65090=y
 CONFIG_MFD_TPS6586X=y
@@ -221,6 +227,7 @@ CONFIG_MMC_SDHCI_TEGRA=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_PWM=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_ONESHOT=y
-- 
1.7.9.5


WARNING: multiple messages have this Message-ID (diff)
From: marcel@ziswiler.com (Marcel Ziswiler)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 2/3] arm: tegra: enable igb, stmpe, i2c chardev, lm95245, pwm leds
Date: Tue, 10 Jun 2014 00:52:45 +0200	[thread overview]
Message-ID: <dadd07f9ed693d6bcf541764b62a2caf4cc38630.1402353627.git.marcel@ziswiler.com> (raw)

The NVIDIA Tegra 3 based Apalis T30 module contains an Intel i210 resp.
i211 gigabit Ethernet controller, an STMPE811 ADC/touch controller, I2C
buses and PWM LEDs generically accessible from user space and an
LM95245 temperature sensor chip. The later four can also be found on
the Colibri T30 module.

While at it move the PCA953x GPIO entry down to its proper place to
have it all nicely ordered again.

Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
---
Changes since v1:
- Forget about spidev for now.

 arch/arm/configs/tegra_defconfig |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig
index fb25e29..d05eec8 100644
--- a/arch/arm/configs/tegra_defconfig
+++ b/arch/arm/configs/tegra_defconfig
@@ -23,7 +23,6 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_PARTITION_ADVANCED=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_GPIO_PCA953X=y
 CONFIG_ARCH_TEGRA=y
 CONFIG_ARCH_TEGRA_2x_SOC=y
 CONFIG_ARCH_TEGRA_3x_SOC=y
@@ -111,6 +110,7 @@ CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
+CONFIG_IGB=y
 CONFIG_R8169=y
 CONFIG_USB_PEGASUS=y
 CONFIG_USB_USBNET=y
@@ -125,6 +125,8 @@ CONFIG_KEYBOARD_GPIO=y
 CONFIG_KEYBOARD_TEGRA=y
 CONFIG_KEYBOARD_CROS_EC=y
 CONFIG_MOUSE_PS2_ELANTECH=y
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_STMPE=y
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_MPU3050=y
 # CONFIG_LEGACY_PTYS is not set
@@ -135,6 +137,7 @@ CONFIG_SERIAL_TEGRA=y
 CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_HW_RANDOM is not set
 # CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_MUX_PCA954x=y
 CONFIG_I2C_MUX_PINCTRL=y
 CONFIG_I2C_TEGRA=y
@@ -144,6 +147,7 @@ CONFIG_SPI_TEGRA20_SFLASH=y
 CONFIG_SPI_TEGRA20_SLINK=y
 CONFIG_PINCTRL_AS3722=y
 CONFIG_PINCTRL_PALMAS=y
+CONFIG_GPIO_PCA953X=y
 CONFIG_GPIO_PCA953X_IRQ=y
 CONFIG_GPIO_PALMAS=y
 CONFIG_GPIO_TPS6586X=y
@@ -155,10 +159,12 @@ CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_AS3722=y
 CONFIG_POWER_RESET_GPIO=y
 CONFIG_SENSORS_LM90=y
+CONFIG_SENSORS_LM95245=y
 CONFIG_MFD_AS3722=y
 CONFIG_MFD_CROS_EC=y
 CONFIG_MFD_CROS_EC_SPI=y
 CONFIG_MFD_MAX8907=y
+CONFIG_MFD_STMPE=y
 CONFIG_MFD_PALMAS=y
 CONFIG_MFD_TPS65090=y
 CONFIG_MFD_TPS6586X=y
@@ -221,6 +227,7 @@ CONFIG_MMC_SDHCI_TEGRA=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_PWM=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_ONESHOT=y
-- 
1.7.9.5

             reply	other threads:[~2014-06-09 22:52 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-06-09 22:52 Marcel Ziswiler [this message]
2014-06-09 22:52 ` [PATCH v2 2/3] arm: tegra: enable igb, stmpe, i2c chardev, lm95245, pwm leds Marcel Ziswiler
2014-06-09 22:52 ` Marcel Ziswiler
2014-06-09 22:52 ` [PATCH v2 3/3] arm: tegra: initial support for apalis t30 Marcel Ziswiler
2014-06-09 22:52   ` Marcel Ziswiler
     [not found]   ` <95c131deb3e410e8defc9fe125dc662bdb276310.1402353627.git.marcel-mitwqZ+T+m9Wk0Htik3J/w@public.gmane.org>
2014-06-12 19:45     ` Stephen Warren
2014-06-12 19:45       ` Stephen Warren
2014-06-12 19:45       ` Stephen Warren
2014-06-16 19:14     ` Stephen Warren
2014-06-16 19:14       ` Stephen Warren
2014-06-16 19:14       ` Stephen Warren
     [not found] ` <dadd07f9ed693d6bcf541764b62a2caf4cc38630.1402353627.git.marcel-mitwqZ+T+m9Wk0Htik3J/w@public.gmane.org>
2014-06-16 18:57   ` [PATCH v2 2/3] arm: tegra: enable igb, stmpe, i2c chardev, lm95245, pwm leds Stephen Warren
2014-06-16 18:57     ` Stephen Warren
2014-06-16 18:57     ` Stephen Warren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=dadd07f9ed693d6bcf541764b62a2caf4cc38630.1402353627.git.marcel@ziswiler.com \
    --to=marcel@ziswiler.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=stefan@agner.ch \
    --cc=swarren@wwwdotorg.org \
    --cc=thierry.reding@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.