All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH V3] nvme: enable ro namespace for ZNS without append
@ 2020-11-10 21:07 ` javier
  0 siblings, 0 replies; 12+ messages in thread
From: javier @ 2020-11-10 21:07 UTC (permalink / raw)
  To: linux-nvme
  Cc: linux-block, hch, kbusch, sagi, axboe, joshi.k, k.jensen,
	Niklas.Cassel, Javier González

From: Javier González <javier.gonz@samsung.com>

Allow ZNS NVMe SSDs to present a read-only namespace when append is not
supported, instead of rejecting the namespace directly.

This allows (i) the namespace to be used in read-only mode, which is not
a problem as the append command only affects the write path, and (ii) to
use standard management tools such as nvme-cli to choose a different
format or firmware slot that is compatible with the Linux zoned block
device.

This patch includes comments from Christoph, Niklas and Keith that
applied to a different approach setting capacity to 0
  https://www.spinics.net/lists/linux-block/msg60747.html

The reminder of the original patch will be submitted separately.

Changes since V2:
  - Fix small conflict with a queued patch from Sagi (from Christoph)
  - Fix indentation (from Niklas)
  - Refresh effects log page to account for FW changes (from Keith)

Changes since V1:
  - Change logic to use NVME_NS_ATTR_RO (from Christoph)
  - Set max_zone_append egen in RO. This allows the device to be
    properly revalidated and enables user-space tools such as blkzone to
    be used when interacting with this zoned device.

Signed-off-by: Javier González <javier.gonz@samsung.com>
---
 drivers/nvme/host/core.c |  5 ++---
 drivers/nvme/host/nvme.h |  2 ++
 drivers/nvme/host/zns.c  | 19 ++++++++++++++-----
 3 files changed, 18 insertions(+), 8 deletions(-)

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index fff90200497c..8a224a6f2473 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -2083,7 +2083,7 @@ static void nvme_update_disk_info(struct gendisk *disk,
 	nvme_config_discard(disk, ns);
 	nvme_config_write_zeroes(disk, ns);
 
-	if (id->nsattr & NVME_NS_ATTR_RO)
+	if (id->nsattr & NVME_NS_ATTR_RO || test_bit(NVME_NS_FORCE_RO, &ns->flags))
 		set_disk_ro(disk, true);
 }
 
@@ -2951,8 +2951,7 @@ int nvme_get_log(struct nvme_ctrl *ctrl, u32 nsid, u8 log_page, u8 lsp, u8 csi,
 	return nvme_submit_sync_cmd(ctrl->admin_q, &c, log, size);
 }
 
-static int nvme_get_effects_log(struct nvme_ctrl *ctrl, u8 csi,
-				struct nvme_effects_log **log)
+int nvme_get_effects_log(struct nvme_ctrl *ctrl, u8 csi, struct nvme_effects_log **log)
 {
 	struct nvme_cel *cel = xa_load(&ctrl->cels, csi);
 	int ret;
diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h
index 83fb30e317e0..857fca95f016 100644
--- a/drivers/nvme/host/nvme.h
+++ b/drivers/nvme/host/nvme.h
@@ -449,6 +449,7 @@ struct nvme_ns {
 #define NVME_NS_REMOVING	0
 #define NVME_NS_DEAD     	1
 #define NVME_NS_ANA_PENDING	2
+#define NVME_NS_FORCE_RO	3
 
 	struct nvme_fault_inject fault_inject;
 
@@ -638,6 +639,7 @@ int nvme_delete_ctrl(struct nvme_ctrl *ctrl);
 
 int nvme_get_log(struct nvme_ctrl *ctrl, u32 nsid, u8 log_page, u8 lsp, u8 csi,
 		void *log, size_t size, u64 offset);
+int nvme_get_effects_log(struct nvme_ctrl *ctrl, u8 csi, struct nvme_effects_log **log);
 struct nvme_ns *nvme_get_ns_from_disk(struct gendisk *disk,
 		struct nvme_ns_head **head, int *srcu_idx);
 void nvme_put_ns_from_disk(struct nvme_ns_head *head, int idx);
diff --git a/drivers/nvme/host/zns.c b/drivers/nvme/host/zns.c
index 67e87e9f306f..47679a90795c 100644
--- a/drivers/nvme/host/zns.c
+++ b/drivers/nvme/host/zns.c
@@ -54,13 +54,22 @@ int nvme_update_zone_info(struct nvme_ns *ns, unsigned lbaf)
 	struct nvme_id_ns_zns *id;
 	int status;
 
+	/* Refresh effects log page to check for changes on append support */
+	status = nvme_get_effects_log(ns->ctrl, ns->head->ids.csi, &ns->head->effects);
+	if (status)
+		return status;
+
 	/* Driver requires zone append support */
-	if (!(le32_to_cpu(log->iocs[nvme_cmd_zone_append]) &
-			NVME_CMD_EFFECTS_CSUPP)) {
+	if ((le32_to_cpu(log->iocs[nvme_cmd_zone_append]) & NVME_CMD_EFFECTS_CSUPP)) {
+		if (test_and_clear_bit(NVME_NS_FORCE_RO, &ns->flags))
+			dev_warn(ns->ctrl->device,
+				 "append supported for zoned namespace:%d. Remove read-only mode\n",
+				 ns->head->ns_id);
+	} else {
+		set_bit(NVME_NS_FORCE_RO, &ns->flags);
 		dev_warn(ns->ctrl->device,
-			"append not supported for zoned namespace:%d\n",
-			ns->head->ns_id);
-		return -EINVAL;
+			 "append not supported for zoned namespace:%d. Forcing to read-only mode\n",
+			 ns->head->ns_id);
 	}
 
 	/* Lazily query controller append limit for the first zoned namespace */
-- 
2.17.1


^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH V3] nvme: enable ro namespace for ZNS without append
@ 2020-11-10 21:07 ` javier
  0 siblings, 0 replies; 12+ messages in thread
From: javier @ 2020-11-10 21:07 UTC (permalink / raw)
  To: linux-nvme
  Cc: axboe, Niklas.Cassel, sagi, joshi.k, k.jensen, linux-block,
	kbusch, Javier González, hch

From: Javier González <javier.gonz@samsung.com>

Allow ZNS NVMe SSDs to present a read-only namespace when append is not
supported, instead of rejecting the namespace directly.

This allows (i) the namespace to be used in read-only mode, which is not
a problem as the append command only affects the write path, and (ii) to
use standard management tools such as nvme-cli to choose a different
format or firmware slot that is compatible with the Linux zoned block
device.

This patch includes comments from Christoph, Niklas and Keith that
applied to a different approach setting capacity to 0
  https://www.spinics.net/lists/linux-block/msg60747.html

The reminder of the original patch will be submitted separately.

Changes since V2:
  - Fix small conflict with a queued patch from Sagi (from Christoph)
  - Fix indentation (from Niklas)
  - Refresh effects log page to account for FW changes (from Keith)

Changes since V1:
  - Change logic to use NVME_NS_ATTR_RO (from Christoph)
  - Set max_zone_append egen in RO. This allows the device to be
    properly revalidated and enables user-space tools such as blkzone to
    be used when interacting with this zoned device.

Signed-off-by: Javier González <javier.gonz@samsung.com>
---
 drivers/nvme/host/core.c |  5 ++---
 drivers/nvme/host/nvme.h |  2 ++
 drivers/nvme/host/zns.c  | 19 ++++++++++++++-----
 3 files changed, 18 insertions(+), 8 deletions(-)

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index fff90200497c..8a224a6f2473 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -2083,7 +2083,7 @@ static void nvme_update_disk_info(struct gendisk *disk,
 	nvme_config_discard(disk, ns);
 	nvme_config_write_zeroes(disk, ns);
 
-	if (id->nsattr & NVME_NS_ATTR_RO)
+	if (id->nsattr & NVME_NS_ATTR_RO || test_bit(NVME_NS_FORCE_RO, &ns->flags))
 		set_disk_ro(disk, true);
 }
 
@@ -2951,8 +2951,7 @@ int nvme_get_log(struct nvme_ctrl *ctrl, u32 nsid, u8 log_page, u8 lsp, u8 csi,
 	return nvme_submit_sync_cmd(ctrl->admin_q, &c, log, size);
 }
 
-static int nvme_get_effects_log(struct nvme_ctrl *ctrl, u8 csi,
-				struct nvme_effects_log **log)
+int nvme_get_effects_log(struct nvme_ctrl *ctrl, u8 csi, struct nvme_effects_log **log)
 {
 	struct nvme_cel *cel = xa_load(&ctrl->cels, csi);
 	int ret;
diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h
index 83fb30e317e0..857fca95f016 100644
--- a/drivers/nvme/host/nvme.h
+++ b/drivers/nvme/host/nvme.h
@@ -449,6 +449,7 @@ struct nvme_ns {
 #define NVME_NS_REMOVING	0
 #define NVME_NS_DEAD     	1
 #define NVME_NS_ANA_PENDING	2
+#define NVME_NS_FORCE_RO	3
 
 	struct nvme_fault_inject fault_inject;
 
@@ -638,6 +639,7 @@ int nvme_delete_ctrl(struct nvme_ctrl *ctrl);
 
 int nvme_get_log(struct nvme_ctrl *ctrl, u32 nsid, u8 log_page, u8 lsp, u8 csi,
 		void *log, size_t size, u64 offset);
+int nvme_get_effects_log(struct nvme_ctrl *ctrl, u8 csi, struct nvme_effects_log **log);
 struct nvme_ns *nvme_get_ns_from_disk(struct gendisk *disk,
 		struct nvme_ns_head **head, int *srcu_idx);
 void nvme_put_ns_from_disk(struct nvme_ns_head *head, int idx);
diff --git a/drivers/nvme/host/zns.c b/drivers/nvme/host/zns.c
index 67e87e9f306f..47679a90795c 100644
--- a/drivers/nvme/host/zns.c
+++ b/drivers/nvme/host/zns.c
@@ -54,13 +54,22 @@ int nvme_update_zone_info(struct nvme_ns *ns, unsigned lbaf)
 	struct nvme_id_ns_zns *id;
 	int status;
 
+	/* Refresh effects log page to check for changes on append support */
+	status = nvme_get_effects_log(ns->ctrl, ns->head->ids.csi, &ns->head->effects);
+	if (status)
+		return status;
+
 	/* Driver requires zone append support */
-	if (!(le32_to_cpu(log->iocs[nvme_cmd_zone_append]) &
-			NVME_CMD_EFFECTS_CSUPP)) {
+	if ((le32_to_cpu(log->iocs[nvme_cmd_zone_append]) & NVME_CMD_EFFECTS_CSUPP)) {
+		if (test_and_clear_bit(NVME_NS_FORCE_RO, &ns->flags))
+			dev_warn(ns->ctrl->device,
+				 "append supported for zoned namespace:%d. Remove read-only mode\n",
+				 ns->head->ns_id);
+	} else {
+		set_bit(NVME_NS_FORCE_RO, &ns->flags);
 		dev_warn(ns->ctrl->device,
-			"append not supported for zoned namespace:%d\n",
-			ns->head->ns_id);
-		return -EINVAL;
+			 "append not supported for zoned namespace:%d. Forcing to read-only mode\n",
+			 ns->head->ns_id);
 	}
 
 	/* Lazily query controller append limit for the first zoned namespace */
-- 
2.17.1


_______________________________________________
Linux-nvme mailing list
Linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH V3] nvme: enable ro namespace for ZNS without append
  2020-11-10 21:07 ` javier
@ 2020-11-10 22:09   ` Keith Busch
  -1 siblings, 0 replies; 12+ messages in thread
From: Keith Busch @ 2020-11-10 22:09 UTC (permalink / raw)
  To: javier
  Cc: linux-nvme, linux-block, hch, sagi, axboe, joshi.k, k.jensen,
	Niklas.Cassel, Javier González

On Tue, Nov 10, 2020 at 10:07:08PM +0100, javier@javigon.com wrote:
> -	if (id->nsattr & NVME_NS_ATTR_RO)
> +	if (id->nsattr & NVME_NS_ATTR_RO || test_bit(NVME_NS_FORCE_RO, &ns->flags))
>  		set_disk_ro(disk, true);

If the FORCE_RO flag is set, the disk is set to read-only. If that flag
is later cleared, nothing clears the disk's read-only setting.

> +	/* Refresh effects log page to check for changes on append support */
> +	status = nvme_get_effects_log(ns->ctrl, ns->head->ids.csi, &ns->head->effects);

That function just returns the cached log; no refresh occurs there.

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH V3] nvme: enable ro namespace for ZNS without append
@ 2020-11-10 22:09   ` Keith Busch
  0 siblings, 0 replies; 12+ messages in thread
From: Keith Busch @ 2020-11-10 22:09 UTC (permalink / raw)
  To: javier
  Cc: axboe, Niklas.Cassel, sagi, joshi.k, k.jensen, linux-nvme,
	linux-block, Javier González, hch

On Tue, Nov 10, 2020 at 10:07:08PM +0100, javier@javigon.com wrote:
> -	if (id->nsattr & NVME_NS_ATTR_RO)
> +	if (id->nsattr & NVME_NS_ATTR_RO || test_bit(NVME_NS_FORCE_RO, &ns->flags))
>  		set_disk_ro(disk, true);

If the FORCE_RO flag is set, the disk is set to read-only. If that flag
is later cleared, nothing clears the disk's read-only setting.

> +	/* Refresh effects log page to check for changes on append support */
> +	status = nvme_get_effects_log(ns->ctrl, ns->head->ids.csi, &ns->head->effects);

That function just returns the cached log; no refresh occurs there.

_______________________________________________
Linux-nvme mailing list
Linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH V3] nvme: enable ro namespace for ZNS without append
  2020-11-10 22:09   ` Keith Busch
@ 2020-11-11  1:41     ` Sagi Grimberg
  -1 siblings, 0 replies; 12+ messages in thread
From: Sagi Grimberg @ 2020-11-11  1:41 UTC (permalink / raw)
  To: Keith Busch, javier
  Cc: linux-nvme, linux-block, hch, axboe, joshi.k, k.jensen,
	Niklas.Cassel, Javier González


>> -	if (id->nsattr & NVME_NS_ATTR_RO)
>> +	if (id->nsattr & NVME_NS_ATTR_RO || test_bit(NVME_NS_FORCE_RO, &ns->flags))
>>   		set_disk_ro(disk, true);
> 
> If the FORCE_RO flag is set, the disk is set to read-only. If that flag
> is later cleared, nothing clears the disk's read-only setting.

Yea, that is true also for the non-force case, but before it broke
BLKROSET so I reverted that. We can use this FORCE_RO for BLKROSET as
well I think...

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH V3] nvme: enable ro namespace for ZNS without append
@ 2020-11-11  1:41     ` Sagi Grimberg
  0 siblings, 0 replies; 12+ messages in thread
From: Sagi Grimberg @ 2020-11-11  1:41 UTC (permalink / raw)
  To: Keith Busch, javier
  Cc: axboe, Niklas.Cassel, joshi.k, k.jensen, linux-nvme, linux-block,
	Javier González, hch


>> -	if (id->nsattr & NVME_NS_ATTR_RO)
>> +	if (id->nsattr & NVME_NS_ATTR_RO || test_bit(NVME_NS_FORCE_RO, &ns->flags))
>>   		set_disk_ro(disk, true);
> 
> If the FORCE_RO flag is set, the disk is set to read-only. If that flag
> is later cleared, nothing clears the disk's read-only setting.

Yea, that is true also for the non-force case, but before it broke
BLKROSET so I reverted that. We can use this FORCE_RO for BLKROSET as
well I think...

_______________________________________________
Linux-nvme mailing list
Linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH V3] nvme: enable ro namespace for ZNS without append
  2020-11-11  1:41     ` Sagi Grimberg
@ 2020-11-11  8:15       ` Christoph Hellwig
  -1 siblings, 0 replies; 12+ messages in thread
From: Christoph Hellwig @ 2020-11-11  8:15 UTC (permalink / raw)
  To: Sagi Grimberg
  Cc: Keith Busch, javier, linux-nvme, linux-block, hch, axboe,
	joshi.k, k.jensen, Niklas.Cassel, Javier González

On Tue, Nov 10, 2020 at 05:41:15PM -0800, Sagi Grimberg wrote:
>
>>> -	if (id->nsattr & NVME_NS_ATTR_RO)
>>> +	if (id->nsattr & NVME_NS_ATTR_RO || test_bit(NVME_NS_FORCE_RO, &ns->flags))
>>>   		set_disk_ro(disk, true);
>>
>> If the FORCE_RO flag is set, the disk is set to read-only. If that flag
>> is later cleared, nothing clears the disk's read-only setting.
>
> Yea, that is true also for the non-force case, but before it broke
> BLKROSET so I reverted that. We can use this FORCE_RO for BLKROSET as
> well I think...

Let me prioritize the hard r/o setting.  mkp actually has an older patch
that did just that which I'll resurrect.

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH V3] nvme: enable ro namespace for ZNS without append
@ 2020-11-11  8:15       ` Christoph Hellwig
  0 siblings, 0 replies; 12+ messages in thread
From: Christoph Hellwig @ 2020-11-11  8:15 UTC (permalink / raw)
  To: Sagi Grimberg
  Cc: axboe, Niklas.Cassel, javier, joshi.k, k.jensen, linux-nvme,
	linux-block, Keith Busch, Javier González, hch

On Tue, Nov 10, 2020 at 05:41:15PM -0800, Sagi Grimberg wrote:
>
>>> -	if (id->nsattr & NVME_NS_ATTR_RO)
>>> +	if (id->nsattr & NVME_NS_ATTR_RO || test_bit(NVME_NS_FORCE_RO, &ns->flags))
>>>   		set_disk_ro(disk, true);
>>
>> If the FORCE_RO flag is set, the disk is set to read-only. If that flag
>> is later cleared, nothing clears the disk's read-only setting.
>
> Yea, that is true also for the non-force case, but before it broke
> BLKROSET so I reverted that. We can use this FORCE_RO for BLKROSET as
> well I think...

Let me prioritize the hard r/o setting.  mkp actually has an older patch
that did just that which I'll resurrect.

_______________________________________________
Linux-nvme mailing list
Linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH V3] nvme: enable ro namespace for ZNS without append
  2020-11-11  8:15       ` Christoph Hellwig
@ 2020-11-11  8:36         ` Sagi Grimberg
  -1 siblings, 0 replies; 12+ messages in thread
From: Sagi Grimberg @ 2020-11-11  8:36 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: Keith Busch, javier, linux-nvme, linux-block, axboe, joshi.k,
	k.jensen, Niklas.Cassel, Javier González


>>>> -	if (id->nsattr & NVME_NS_ATTR_RO)
>>>> +	if (id->nsattr & NVME_NS_ATTR_RO || test_bit(NVME_NS_FORCE_RO, &ns->flags))
>>>>    		set_disk_ro(disk, true);
>>>
>>> If the FORCE_RO flag is set, the disk is set to read-only. If that flag
>>> is later cleared, nothing clears the disk's read-only setting.
>>
>> Yea, that is true also for the non-force case, but before it broke
>> BLKROSET so I reverted that. We can use this FORCE_RO for BLKROSET as
>> well I think...
> 
> Let me prioritize the hard r/o setting.  mkp actually has an older patch
> that did just that which I'll resurrect.

Sounds good.

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH V3] nvme: enable ro namespace for ZNS without append
@ 2020-11-11  8:36         ` Sagi Grimberg
  0 siblings, 0 replies; 12+ messages in thread
From: Sagi Grimberg @ 2020-11-11  8:36 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: axboe, Niklas.Cassel, javier, joshi.k, k.jensen, linux-nvme,
	linux-block, Keith Busch, Javier González


>>>> -	if (id->nsattr & NVME_NS_ATTR_RO)
>>>> +	if (id->nsattr & NVME_NS_ATTR_RO || test_bit(NVME_NS_FORCE_RO, &ns->flags))
>>>>    		set_disk_ro(disk, true);
>>>
>>> If the FORCE_RO flag is set, the disk is set to read-only. If that flag
>>> is later cleared, nothing clears the disk's read-only setting.
>>
>> Yea, that is true also for the non-force case, but before it broke
>> BLKROSET so I reverted that. We can use this FORCE_RO for BLKROSET as
>> well I think...
> 
> Let me prioritize the hard r/o setting.  mkp actually has an older patch
> that did just that which I'll resurrect.

Sounds good.

_______________________________________________
Linux-nvme mailing list
Linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: nvme: enable ro namespace for ZNS without append
  2020-11-11  8:36         ` Sagi Grimberg
@ 2020-11-11  9:21           ` Javier González
  -1 siblings, 0 replies; 12+ messages in thread
From: Javier González @ 2020-11-11  9:21 UTC (permalink / raw)
  To: Sagi Grimberg
  Cc: Christoph Hellwig, Keith Busch, linux-nvme, linux-block, axboe,
	joshi.k, k.jensen, Niklas.Cassel

On 11.11.2020 00:36, Sagi Grimberg wrote:
>
>>>>>-	if (id->nsattr & NVME_NS_ATTR_RO)
>>>>>+	if (id->nsattr & NVME_NS_ATTR_RO || test_bit(NVME_NS_FORCE_RO, &ns->flags))
>>>>>   		set_disk_ro(disk, true);
>>>>
>>>>If the FORCE_RO flag is set, the disk is set to read-only. If that flag
>>>>is later cleared, nothing clears the disk's read-only setting.
>>>
>>>Yea, that is true also for the non-force case, but before it broke
>>>BLKROSET so I reverted that. We can use this FORCE_RO for BLKROSET as
>>>well I think...
>>
>>Let me prioritize the hard r/o setting.  mkp actually has an older patch
>>that did just that which I'll resurrect.
>
>Sounds good.

Cool. I'll repost fixing the log page update. I can then rebase on the
patches you send for this - or you can put them on top if it is easier.

Thanks!

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: nvme: enable ro namespace for ZNS without append
@ 2020-11-11  9:21           ` Javier González
  0 siblings, 0 replies; 12+ messages in thread
From: Javier González @ 2020-11-11  9:21 UTC (permalink / raw)
  To: Sagi Grimberg
  Cc: axboe, Niklas.Cassel, joshi.k, k.jensen, linux-nvme, linux-block,
	Keith Busch, Christoph Hellwig

On 11.11.2020 00:36, Sagi Grimberg wrote:
>
>>>>>-	if (id->nsattr & NVME_NS_ATTR_RO)
>>>>>+	if (id->nsattr & NVME_NS_ATTR_RO || test_bit(NVME_NS_FORCE_RO, &ns->flags))
>>>>>   		set_disk_ro(disk, true);
>>>>
>>>>If the FORCE_RO flag is set, the disk is set to read-only. If that flag
>>>>is later cleared, nothing clears the disk's read-only setting.
>>>
>>>Yea, that is true also for the non-force case, but before it broke
>>>BLKROSET so I reverted that. We can use this FORCE_RO for BLKROSET as
>>>well I think...
>>
>>Let me prioritize the hard r/o setting.  mkp actually has an older patch
>>that did just that which I'll resurrect.
>
>Sounds good.

Cool. I'll repost fixing the log page update. I can then rebase on the
patches you send for this - or you can put them on top if it is easier.

Thanks!

_______________________________________________
Linux-nvme mailing list
Linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme

^ permalink raw reply	[flat|nested] 12+ messages in thread

end of thread, other threads:[~2020-11-11  9:22 UTC | newest]

Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-11-10 21:07 [PATCH V3] nvme: enable ro namespace for ZNS without append javier
2020-11-10 21:07 ` javier
2020-11-10 22:09 ` Keith Busch
2020-11-10 22:09   ` Keith Busch
2020-11-11  1:41   ` Sagi Grimberg
2020-11-11  1:41     ` Sagi Grimberg
2020-11-11  8:15     ` Christoph Hellwig
2020-11-11  8:15       ` Christoph Hellwig
2020-11-11  8:36       ` Sagi Grimberg
2020-11-11  8:36         ` Sagi Grimberg
2020-11-11  9:21         ` Javier González
2020-11-11  9:21           ` Javier González

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.