All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jon Hunter <jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
To: Paul Kocialkowski <contact-W9ppeneeCTY@public.gmane.org>,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Alexandre Courbot
	<gnurou-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
	Thierry Reding
	<thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
Subject: Re: [PATCH] ARM: tegra: nyan: Enable GPU node and related supply
Date: Wed, 21 Sep 2016 08:57:26 +0100	[thread overview]
Message-ID: <e95335ae-ad19-b8cd-634b-63c6a0b88e01@nvidia.com> (raw)
In-Reply-To: <1474395433.1215.23.camel-W9ppeneeCTY@public.gmane.org>


On 20/09/16 19:17, Paul Kocialkowski wrote:
> * PGP Signed by an unknown key
> 
> Le mardi 20 septembre 2016 à 13:24 +0100, Jon Hunter a écrit :
>> On 18/09/16 15:13, Paul Kocialkowski wrote:
>>>
>>> This enables the GPU node for tegra124 nyan boards, which is required to
>>> get graphics acceleration with nouveau on these devices.
>>>
>>> Signed-off-by: Paul Kocialkowski <contact-W9ppeneeCTY@public.gmane.org>
>>> ---
>>>  arch/arm/boot/dts/tegra124-nyan.dtsi | 8 +++++++-
>>>  1 file changed, 7 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi
>>> b/arch/arm/boot/dts/tegra124-nyan.dtsi
>>> index dab9509..225ca77 100644
>>> --- a/arch/arm/boot/dts/tegra124-nyan.dtsi
>>> +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi
>>> @@ -42,6 +42,12 @@
>>>  		};
>>>  	};
>>>  
>>> +	gpu@0,57000000 {
>>> +		status = "okay";
>>> +
>>> +		vdd-supply = <&vdd_gpu>;
>>> +	};
>>> +
>>>  	serial@70006000 {
>>>  		/* Debug connector on the bottom of the board near SD card.
>>> */
>>>  		status = "okay";
>>> @@ -214,7 +220,7 @@
>>>  					regulator-always-on;
>>>  				};
>>>  
>>> -				sd6 {
>>> +				vdd_gpu: sd6 {
>>>  					regulator-name = "+VDD_GPU_AP";
>>>  					regulator-min-microvolt = <650000>;
>>>  					regulator-max-microvolt =
>>> <1200000>;
>>>
>>
>> Looks good to me. I see the following error when booting but looking at the
>> code appears to be benign. Thierry, Alex, is this normal/okay?
> 
> I have the same messages and asked Alexandre about them the other day. He told
> me that it looks normal.

Ok great. Hopefully, Alex can ACK then.

Cheers
Jon

-- 
nvpublic

WARNING: multiple messages have this Message-ID (diff)
From: Jon Hunter <jonathanh@nvidia.com>
To: Paul Kocialkowski <contact@paulk.fr>,
	<linux-kernel@vger.kernel.org>,
	Alexandre Courbot <gnurou@gmail.com>,
	Thierry Reding <thierry.reding@gmail.com>
Cc: <linux-tegra@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<devicetree@vger.kernel.org>,
	Stephen Warren <swarren@wwwdotorg.org>
Subject: Re: [PATCH] ARM: tegra: nyan: Enable GPU node and related supply
Date: Wed, 21 Sep 2016 08:57:26 +0100	[thread overview]
Message-ID: <e95335ae-ad19-b8cd-634b-63c6a0b88e01@nvidia.com> (raw)
In-Reply-To: <1474395433.1215.23.camel@paulk.fr>


On 20/09/16 19:17, Paul Kocialkowski wrote:
> * PGP Signed by an unknown key
> 
> Le mardi 20 septembre 2016 à 13:24 +0100, Jon Hunter a écrit :
>> On 18/09/16 15:13, Paul Kocialkowski wrote:
>>>
>>> This enables the GPU node for tegra124 nyan boards, which is required to
>>> get graphics acceleration with nouveau on these devices.
>>>
>>> Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
>>> ---
>>>  arch/arm/boot/dts/tegra124-nyan.dtsi | 8 +++++++-
>>>  1 file changed, 7 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi
>>> b/arch/arm/boot/dts/tegra124-nyan.dtsi
>>> index dab9509..225ca77 100644
>>> --- a/arch/arm/boot/dts/tegra124-nyan.dtsi
>>> +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi
>>> @@ -42,6 +42,12 @@
>>>  		};
>>>  	};
>>>  
>>> +	gpu@0,57000000 {
>>> +		status = "okay";
>>> +
>>> +		vdd-supply = <&vdd_gpu>;
>>> +	};
>>> +
>>>  	serial@70006000 {
>>>  		/* Debug connector on the bottom of the board near SD card.
>>> */
>>>  		status = "okay";
>>> @@ -214,7 +220,7 @@
>>>  					regulator-always-on;
>>>  				};
>>>  
>>> -				sd6 {
>>> +				vdd_gpu: sd6 {
>>>  					regulator-name = "+VDD_GPU_AP";
>>>  					regulator-min-microvolt = <650000>;
>>>  					regulator-max-microvolt =
>>> <1200000>;
>>>
>>
>> Looks good to me. I see the following error when booting but looking at the
>> code appears to be benign. Thierry, Alex, is this normal/okay?
> 
> I have the same messages and asked Alexandre about them the other day. He told
> me that it looks normal.

Ok great. Hopefully, Alex can ACK then.

Cheers
Jon

-- 
nvpublic

WARNING: multiple messages have this Message-ID (diff)
From: jonathanh@nvidia.com (Jon Hunter)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: tegra: nyan: Enable GPU node and related supply
Date: Wed, 21 Sep 2016 08:57:26 +0100	[thread overview]
Message-ID: <e95335ae-ad19-b8cd-634b-63c6a0b88e01@nvidia.com> (raw)
In-Reply-To: <1474395433.1215.23.camel@paulk.fr>


On 20/09/16 19:17, Paul Kocialkowski wrote:
> * PGP Signed by an unknown key
> 
> Le mardi 20 septembre 2016 ? 13:24 +0100, Jon Hunter a ?crit :
>> On 18/09/16 15:13, Paul Kocialkowski wrote:
>>>
>>> This enables the GPU node for tegra124 nyan boards, which is required to
>>> get graphics acceleration with nouveau on these devices.
>>>
>>> Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
>>> ---
>>>  arch/arm/boot/dts/tegra124-nyan.dtsi | 8 +++++++-
>>>  1 file changed, 7 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi
>>> b/arch/arm/boot/dts/tegra124-nyan.dtsi
>>> index dab9509..225ca77 100644
>>> --- a/arch/arm/boot/dts/tegra124-nyan.dtsi
>>> +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi
>>> @@ -42,6 +42,12 @@
>>>  		};
>>>  	};
>>>  
>>> +	gpu at 0,57000000 {
>>> +		status = "okay";
>>> +
>>> +		vdd-supply = <&vdd_gpu>;
>>> +	};
>>> +
>>>  	serial at 70006000 {
>>>  		/* Debug connector on the bottom of the board near SD card.
>>> */
>>>  		status = "okay";
>>> @@ -214,7 +220,7 @@
>>>  					regulator-always-on;
>>>  				};
>>>  
>>> -				sd6 {
>>> +				vdd_gpu: sd6 {
>>>  					regulator-name = "+VDD_GPU_AP";
>>>  					regulator-min-microvolt = <650000>;
>>>  					regulator-max-microvolt =
>>> <1200000>;
>>>
>>
>> Looks good to me. I see the following error when booting but looking at the
>> code appears to be benign. Thierry, Alex, is this normal/okay?
> 
> I have the same messages and asked Alexandre about them the other day. He told
> me that it looks normal.

Ok great. Hopefully, Alex can ACK then.

Cheers
Jon

-- 
nvpublic

  parent reply	other threads:[~2016-09-21  7:57 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-09-18 14:13 [PATCH] ARM: tegra: nyan: Enable GPU node and related supply Paul Kocialkowski
2016-09-18 14:13 ` Paul Kocialkowski
2016-09-18 14:13 ` Paul Kocialkowski
     [not found] ` <20160918141311.17140-1-contact-W9ppeneeCTY@public.gmane.org>
2016-09-20 12:24   ` Jon Hunter
2016-09-20 12:24     ` Jon Hunter
2016-09-20 12:24     ` Jon Hunter
2016-09-20 18:17     ` Paul Kocialkowski
2016-09-20 18:17       ` Paul Kocialkowski
     [not found]       ` <1474395433.1215.23.camel-W9ppeneeCTY@public.gmane.org>
2016-09-21  7:57         ` Jon Hunter [this message]
2016-09-21  7:57           ` Jon Hunter
2016-09-21  7:57           ` Jon Hunter
     [not found]           ` <e95335ae-ad19-b8cd-634b-63c6a0b88e01-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2016-11-07 12:51             ` Alexandre Courbot
2016-11-07 12:51               ` Alexandre Courbot
2016-11-07 12:51               ` Alexandre Courbot
2016-11-07 13:00               ` Jon Hunter
2016-11-07 13:00                 ` Jon Hunter
2016-11-07 13:00                 ` Jon Hunter
2016-11-07 13:29   ` Thierry Reding
2016-11-07 13:29     ` Thierry Reding
2016-11-07 13:29     ` Thierry Reding

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=e95335ae-ad19-b8cd-634b-63c6a0b88e01@nvidia.com \
    --to=jonathanh-ddmlm1+adcrqt0dzr+alfa@public.gmane.org \
    --cc=contact-W9ppeneeCTY@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=gnurou-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org \
    --cc=thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.