[PATCH] ARM: tegra: nyan: Enable GPU node and related supply

[PATCH] ARM: tegra: nyan: Enable GPU node and related supply

[Paul Kocialkowski]

This enables the GPU node for tegra124 nyan boards, which is required to
get graphics acceleration with nouveau on these devices.

Signed-off-by: Paul Kocialkowski <contact-W9ppeneeCTY@public.gmane.org>
---
 arch/arm/boot/dts/tegra124-nyan.dtsi | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi
index dab9509..225ca77 100644
--- a/arch/arm/boot/dts/tegra124-nyan.dtsi
+++ b/arch/arm/boot/dts/tegra124-nyan.dtsi
@@ -42,6 +42,12 @@
 		};
 	};
 
+	gpu@0,57000000 {
+		status = "okay";
+
+		vdd-supply = <&vdd_gpu>;
+	};
+
 	serial@70006000 {
 		/* Debug connector on the bottom of the board near SD card. */
 		status = "okay";
@@ -214,7 +220,7 @@
 					regulator-always-on;
 				};
 
-				sd6 {
+				vdd_gpu: sd6 {
 					regulator-name = "+VDD_GPU_AP";
 					regulator-min-microvolt = <650000>;
 					regulator-max-microvolt = <1200000>;
-- 
2.9.3

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH] ARM: tegra: nyan: Enable GPU node and related supply

[Paul Kocialkowski]

This enables the GPU node for tegra124 nyan boards, which is required to
get graphics acceleration with nouveau on these devices.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
---
 arch/arm/boot/dts/tegra124-nyan.dtsi | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi
index dab9509..225ca77 100644
--- a/arch/arm/boot/dts/tegra124-nyan.dtsi
+++ b/arch/arm/boot/dts/tegra124-nyan.dtsi
@@ -42,6 +42,12 @@
 		};
 	};
 
+	gpu@0,57000000 {
+		status = "okay";
+
+		vdd-supply = <&vdd_gpu>;
+	};
+
 	serial@70006000 {
 		/* Debug connector on the bottom of the board near SD card. */
 		status = "okay";
@@ -214,7 +220,7 @@
 					regulator-always-on;
 				};
 
-				sd6 {
+				vdd_gpu: sd6 {
 					regulator-name = "+VDD_GPU_AP";
 					regulator-min-microvolt = <650000>;
 					regulator-max-microvolt = <1200000>;
-- 
2.9.3

[PATCH] ARM: tegra: nyan: Enable GPU node and related supply

[Paul Kocialkowski]

This enables the GPU node for tegra124 nyan boards, which is required to
get graphics acceleration with nouveau on these devices.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
---
 arch/arm/boot/dts/tegra124-nyan.dtsi | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi
index dab9509..225ca77 100644
--- a/arch/arm/boot/dts/tegra124-nyan.dtsi
+++ b/arch/arm/boot/dts/tegra124-nyan.dtsi
@@ -42,6 +42,12 @@
 		};
 	};
 
+	gpu at 0,57000000 {
+		status = "okay";
+
+		vdd-supply = <&vdd_gpu>;
+	};
+
 	serial at 70006000 {
 		/* Debug connector on the bottom of the board near SD card. */
 		status = "okay";
@@ -214,7 +220,7 @@
 					regulator-always-on;
 				};
 
-				sd6 {
+				vdd_gpu: sd6 {
 					regulator-name = "+VDD_GPU_AP";
 					regulator-min-microvolt = <650000>;
 					regulator-max-microvolt = <1200000>;
-- 
2.9.3

Re: [PATCH] ARM: tegra: nyan: Enable GPU node and related supply

[Jon Hunter]

On 18/09/16 15:13, Paul Kocialkowski wrote:
> This enables the GPU node for tegra124 nyan boards, which is required to
> get graphics acceleration with nouveau on these devices.
> 
> Signed-off-by: Paul Kocialkowski <contact-W9ppeneeCTY@public.gmane.org>
> ---
>  arch/arm/boot/dts/tegra124-nyan.dtsi | 8 +++++++-
>  1 file changed, 7 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi
> index dab9509..225ca77 100644
> --- a/arch/arm/boot/dts/tegra124-nyan.dtsi
> +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi
> @@ -42,6 +42,12 @@
>  		};
>  	};
>  
> +	gpu@0,57000000 {
> +		status = "okay";
> +
> +		vdd-supply = <&vdd_gpu>;
> +	};
> +
>  	serial@70006000 {
>  		/* Debug connector on the bottom of the board near SD card. */
>  		status = "okay";
> @@ -214,7 +220,7 @@
>  					regulator-always-on;
>  				};
>  
> -				sd6 {
> +				vdd_gpu: sd6 {
>  					regulator-name = "+VDD_GPU_AP";
>  					regulator-min-microvolt = <650000>;
>  					regulator-max-microvolt = <1200000>;
> 

Looks good to me. I see the following error when booting but looking at the
code appears to be benign. Thierry, Alex, is this normal/okay?

[    5.715181] nouveau 57000000.gpu: NVIDIA GK20A (0ea000a1)                                                                                            
[    5.720625] nouveau 57000000.gpu: imem: using IOMMU                                                                                                  
[    5.803694] nouveau 57000000.gpu: DRM: VRAM: 0 MiB                                                                                                   
[    5.808501] nouveau 57000000.gpu: DRM: GART: 1048576 MiB                                                                                             
[    5.816000] nouveau 57000000.gpu: DRM: failed to create ce channel, -22                                                                              
[    5.924140] nouveau 57000000.gpu: DRM: MM: using GRCE for buffer copies  

Cheers
Jon

-- 
nvpublic
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH] ARM: tegra: nyan: Enable GPU node and related supply

[Jon Hunter]

On 18/09/16 15:13, Paul Kocialkowski wrote:
> This enables the GPU node for tegra124 nyan boards, which is required to
> get graphics acceleration with nouveau on these devices.
> 
> Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
> ---
>  arch/arm/boot/dts/tegra124-nyan.dtsi | 8 +++++++-
>  1 file changed, 7 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi
> index dab9509..225ca77 100644
> --- a/arch/arm/boot/dts/tegra124-nyan.dtsi
> +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi
> @@ -42,6 +42,12 @@
>  		};
>  	};
>  
> +	gpu@0,57000000 {
> +		status = "okay";
> +
> +		vdd-supply = <&vdd_gpu>;
> +	};
> +
>  	serial@70006000 {
>  		/* Debug connector on the bottom of the board near SD card. */
>  		status = "okay";
> @@ -214,7 +220,7 @@
>  					regulator-always-on;
>  				};
>  
> -				sd6 {
> +				vdd_gpu: sd6 {
>  					regulator-name = "+VDD_GPU_AP";
>  					regulator-min-microvolt = <650000>;
>  					regulator-max-microvolt = <1200000>;
> 

Looks good to me. I see the following error when booting but looking at the
code appears to be benign. Thierry, Alex, is this normal/okay?

[    5.715181] nouveau 57000000.gpu: NVIDIA GK20A (0ea000a1)                                                                                            
[    5.720625] nouveau 57000000.gpu: imem: using IOMMU                                                                                                  
[    5.803694] nouveau 57000000.gpu: DRM: VRAM: 0 MiB                                                                                                   
[    5.808501] nouveau 57000000.gpu: DRM: GART: 1048576 MiB                                                                                             
[    5.816000] nouveau 57000000.gpu: DRM: failed to create ce channel, -22                                                                              
[    5.924140] nouveau 57000000.gpu: DRM: MM: using GRCE for buffer copies  

Cheers
Jon

-- 
nvpublic

[PATCH] ARM: tegra: nyan: Enable GPU node and related supply

[Jon Hunter]

On 18/09/16 15:13, Paul Kocialkowski wrote:
> This enables the GPU node for tegra124 nyan boards, which is required to
> get graphics acceleration with nouveau on these devices.
> 
> Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
> ---
>  arch/arm/boot/dts/tegra124-nyan.dtsi | 8 +++++++-
>  1 file changed, 7 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi
> index dab9509..225ca77 100644
> --- a/arch/arm/boot/dts/tegra124-nyan.dtsi
> +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi
> @@ -42,6 +42,12 @@
>  		};
>  	};
>  
> +	gpu at 0,57000000 {
> +		status = "okay";
> +
> +		vdd-supply = <&vdd_gpu>;
> +	};
> +
>  	serial at 70006000 {
>  		/* Debug connector on the bottom of the board near SD card. */
>  		status = "okay";
> @@ -214,7 +220,7 @@
>  					regulator-always-on;
>  				};
>  
> -				sd6 {
> +				vdd_gpu: sd6 {
>  					regulator-name = "+VDD_GPU_AP";
>  					regulator-min-microvolt = <650000>;
>  					regulator-max-microvolt = <1200000>;
> 

Looks good to me. I see the following error when booting but looking at the
code appears to be benign. Thierry, Alex, is this normal/okay?

[    5.715181] nouveau 57000000.gpu: NVIDIA GK20A (0ea000a1)                                                                                            
[    5.720625] nouveau 57000000.gpu: imem: using IOMMU                                                                                                  
[    5.803694] nouveau 57000000.gpu: DRM: VRAM: 0 MiB                                                                                                   
[    5.808501] nouveau 57000000.gpu: DRM: GART: 1048576 MiB                                                                                             
[    5.816000] nouveau 57000000.gpu: DRM: failed to create ce channel, -22                                                                              
[    5.924140] nouveau 57000000.gpu: DRM: MM: using GRCE for buffer copies  

Cheers
Jon

-- 
nvpublic

Re: [PATCH] ARM: tegra: nyan: Enable GPU node and related supply

[Paul Kocialkowski]

[-- Attachment #1: Type: text/plain, Size: 3055 bytes --]

Le mardi 20 septembre 2016 à 13:24 +0100, Jon Hunter a écrit :
> On 18/09/16 15:13, Paul Kocialkowski wrote:
> > 
> > This enables the GPU node for tegra124 nyan boards, which is required to
> > get graphics acceleration with nouveau on these devices.
> > 
> > Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
> > ---
> >  arch/arm/boot/dts/tegra124-nyan.dtsi | 8 +++++++-
> >  1 file changed, 7 insertions(+), 1 deletion(-)
> > 
> > diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi
> > b/arch/arm/boot/dts/tegra124-nyan.dtsi
> > index dab9509..225ca77 100644
> > --- a/arch/arm/boot/dts/tegra124-nyan.dtsi
> > +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi
> > @@ -42,6 +42,12 @@
> >  		};
> >  	};
> >  
> > +	gpu@0,57000000 {
> > +		status = "okay";
> > +
> > +		vdd-supply = <&vdd_gpu>;
> > +	};
> > +
> >  	serial@70006000 {
> >  		/* Debug connector on the bottom of the board near SD card.
> > */
> >  		status = "okay";
> > @@ -214,7 +220,7 @@
> >  					regulator-always-on;
> >  				};
> >  
> > -				sd6 {
> > +				vdd_gpu: sd6 {
> >  					regulator-name = "+VDD_GPU_AP";
> >  					regulator-min-microvolt = <650000>;
> >  					regulator-max-microvolt =
> > <1200000>;
> > 
> 
> Looks good to me. I see the following error when booting but looking at the
> code appears to be benign. Thierry, Alex, is this normal/okay?

I have the same messages and asked Alexandre about them the other day. He told
me that it looks normal.

> [    5.715181] nouveau 57000000.gpu: NVIDIA GK20A
> (0ea000a1)                                                                    
>                         
> [    5.720625] nouveau 57000000.gpu: imem: using
> IOMMU                                                                         
>                          
> [    5.803694] nouveau 57000000.gpu: DRM: VRAM: 0
> MiB                                                                           
>                         
> [    5.808501] nouveau 57000000.gpu: DRM: GART: 1048576
> MiB                                                                           
>                   
> [    5.816000] nouveau 57000000.gpu: DRM: failed to create ce channel,
> -22                                                                           
>    
> [    5.924140] nouveau 57000000.gpu: DRM: MM: using GRCE for buffer copies  
> 
> Cheers
> Jon
> 
-- 
Paul Kocialkowski, developer of low-level free software for embedded devices

Website: https://www.paulk.fr/
Coding blog: https://code.paulk.fr/
Git repositories: https://git.paulk.fr/ https://git.code.paulk.fr/

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 801 bytes --]

[PATCH] ARM: tegra: nyan: Enable GPU node and related supply

[Paul Kocialkowski]

Le mardi 20 septembre 2016 ? 13:24 +0100, Jon Hunter a ?crit?:
> On 18/09/16 15:13, Paul Kocialkowski wrote:
> > 
> > This enables the GPU node for tegra124 nyan boards, which is required to
> > get graphics acceleration with nouveau on these devices.
> > 
> > Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
> > ---
> > ?arch/arm/boot/dts/tegra124-nyan.dtsi | 8 +++++++-
> > ?1 file changed, 7 insertions(+), 1 deletion(-)
> > 
> > diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi
> > b/arch/arm/boot/dts/tegra124-nyan.dtsi
> > index dab9509..225ca77 100644
> > --- a/arch/arm/boot/dts/tegra124-nyan.dtsi
> > +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi
> > @@ -42,6 +42,12 @@
> > ?		};
> > ?	};
> > ?
> > +	gpu at 0,57000000 {
> > +		status = "okay";
> > +
> > +		vdd-supply = <&vdd_gpu>;
> > +	};
> > +
> > ?	serial at 70006000 {
> > ?		/* Debug connector on the bottom of the board near SD card.
> > */
> > ?		status = "okay";
> > @@ -214,7 +220,7 @@
> > ?					regulator-always-on;
> > ?				};
> > ?
> > -				sd6 {
> > +				vdd_gpu: sd6 {
> > ?					regulator-name = "+VDD_GPU_AP";
> > ?					regulator-min-microvolt = <650000>;
> > ?					regulator-max-microvolt =
> > <1200000>;
> > 
> 
> Looks good to me. I see the following error when booting but looking at the
> code appears to be benign. Thierry, Alex, is this normal/okay?

I have the same messages and asked?Alexandre about them the other day. He told
me that it looks normal.

> [????5.715181] nouveau 57000000.gpu: NVIDIA GK20A
> (0ea000a1)????????????????????????????????????????????????????????????????????
> ????????????????????????
> [????5.720625] nouveau 57000000.gpu: imem: using
> IOMMU?????????????????????????????????????????????????????????????????????????
> ?????????????????????????
> [????5.803694] nouveau 57000000.gpu: DRM: VRAM: 0
> MiB???????????????????????????????????????????????????????????????????????????
> ????????????????????????
> [????5.808501] nouveau 57000000.gpu: DRM: GART: 1048576
> MiB???????????????????????????????????????????????????????????????????????????
> ??????????????????
> [????5.816000] nouveau 57000000.gpu: DRM: failed to create ce channel,
> -22???????????????????????????????????????????????????????????????????????????
> ???
> [????5.924140] nouveau 57000000.gpu: DRM: MM: using GRCE for buffer copies??
> 
> Cheers
> Jon
> 
-- 
Paul Kocialkowski, developer of low-level free software for embedded devices

Website: https://www.paulk.fr/
Coding blog: https://code.paulk.fr/
Git repositories: https://git.paulk.fr/ https://git.code.paulk.fr/
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: This is a digitally signed message part
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160920/8b5aba3b/attachment-0001.sig>

Re: [PATCH] ARM: tegra: nyan: Enable GPU node and related supply

[Jon Hunter]

On 20/09/16 19:17, Paul Kocialkowski wrote:
> * PGP Signed by an unknown key
> 
> Le mardi 20 septembre 2016 à 13:24 +0100, Jon Hunter a écrit :
>> On 18/09/16 15:13, Paul Kocialkowski wrote:
>>>
>>> This enables the GPU node for tegra124 nyan boards, which is required to
>>> get graphics acceleration with nouveau on these devices.
>>>
>>> Signed-off-by: Paul Kocialkowski <contact-W9ppeneeCTY@public.gmane.org>
>>> ---
>>>  arch/arm/boot/dts/tegra124-nyan.dtsi | 8 +++++++-
>>>  1 file changed, 7 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi
>>> b/arch/arm/boot/dts/tegra124-nyan.dtsi
>>> index dab9509..225ca77 100644
>>> --- a/arch/arm/boot/dts/tegra124-nyan.dtsi
>>> +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi
>>> @@ -42,6 +42,12 @@
>>>  		};
>>>  	};
>>>  
>>> +	gpu@0,57000000 {
>>> +		status = "okay";
>>> +
>>> +		vdd-supply = <&vdd_gpu>;
>>> +	};
>>> +
>>>  	serial@70006000 {
>>>  		/* Debug connector on the bottom of the board near SD card.
>>> */
>>>  		status = "okay";
>>> @@ -214,7 +220,7 @@
>>>  					regulator-always-on;
>>>  				};
>>>  
>>> -				sd6 {
>>> +				vdd_gpu: sd6 {
>>>  					regulator-name = "+VDD_GPU_AP";
>>>  					regulator-min-microvolt = <650000>;
>>>  					regulator-max-microvolt =
>>> <1200000>;
>>>
>>
>> Looks good to me. I see the following error when booting but looking at the
>> code appears to be benign. Thierry, Alex, is this normal/okay?
> 
> I have the same messages and asked Alexandre about them the other day. He told
> me that it looks normal.

Ok great. Hopefully, Alex can ACK then.

Cheers
Jon

-- 
nvpublic

Re: [PATCH] ARM: tegra: nyan: Enable GPU node and related supply

[Jon Hunter]

On 20/09/16 19:17, Paul Kocialkowski wrote:
> * PGP Signed by an unknown key
> 
> Le mardi 20 septembre 2016 à 13:24 +0100, Jon Hunter a écrit :
>> On 18/09/16 15:13, Paul Kocialkowski wrote:
>>>
>>> This enables the GPU node for tegra124 nyan boards, which is required to
>>> get graphics acceleration with nouveau on these devices.
>>>
>>> Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
>>> ---
>>>  arch/arm/boot/dts/tegra124-nyan.dtsi | 8 +++++++-
>>>  1 file changed, 7 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi
>>> b/arch/arm/boot/dts/tegra124-nyan.dtsi
>>> index dab9509..225ca77 100644
>>> --- a/arch/arm/boot/dts/tegra124-nyan.dtsi
>>> +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi
>>> @@ -42,6 +42,12 @@
>>>  		};
>>>  	};
>>>  
>>> +	gpu@0,57000000 {
>>> +		status = "okay";
>>> +
>>> +		vdd-supply = <&vdd_gpu>;
>>> +	};
>>> +
>>>  	serial@70006000 {
>>>  		/* Debug connector on the bottom of the board near SD card.
>>> */
>>>  		status = "okay";
>>> @@ -214,7 +220,7 @@
>>>  					regulator-always-on;
>>>  				};
>>>  
>>> -				sd6 {
>>> +				vdd_gpu: sd6 {
>>>  					regulator-name = "+VDD_GPU_AP";
>>>  					regulator-min-microvolt = <650000>;
>>>  					regulator-max-microvolt =
>>> <1200000>;
>>>
>>
>> Looks good to me. I see the following error when booting but looking at the
>> code appears to be benign. Thierry, Alex, is this normal/okay?
> 
> I have the same messages and asked Alexandre about them the other day. He told
> me that it looks normal.

Ok great. Hopefully, Alex can ACK then.

Cheers
Jon

-- 
nvpublic

[PATCH] ARM: tegra: nyan: Enable GPU node and related supply

[Jon Hunter]

On 20/09/16 19:17, Paul Kocialkowski wrote:
> * PGP Signed by an unknown key
> 
> Le mardi 20 septembre 2016 ? 13:24 +0100, Jon Hunter a ?crit :
>> On 18/09/16 15:13, Paul Kocialkowski wrote:
>>>
>>> This enables the GPU node for tegra124 nyan boards, which is required to
>>> get graphics acceleration with nouveau on these devices.
>>>
>>> Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
>>> ---
>>>  arch/arm/boot/dts/tegra124-nyan.dtsi | 8 +++++++-
>>>  1 file changed, 7 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi
>>> b/arch/arm/boot/dts/tegra124-nyan.dtsi
>>> index dab9509..225ca77 100644
>>> --- a/arch/arm/boot/dts/tegra124-nyan.dtsi
>>> +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi
>>> @@ -42,6 +42,12 @@
>>>  		};
>>>  	};
>>>  
>>> +	gpu at 0,57000000 {
>>> +		status = "okay";
>>> +
>>> +		vdd-supply = <&vdd_gpu>;
>>> +	};
>>> +
>>>  	serial at 70006000 {
>>>  		/* Debug connector on the bottom of the board near SD card.
>>> */
>>>  		status = "okay";
>>> @@ -214,7 +220,7 @@
>>>  					regulator-always-on;
>>>  				};
>>>  
>>> -				sd6 {
>>> +				vdd_gpu: sd6 {
>>>  					regulator-name = "+VDD_GPU_AP";
>>>  					regulator-min-microvolt = <650000>;
>>>  					regulator-max-microvolt =
>>> <1200000>;
>>>
>>
>> Looks good to me. I see the following error when booting but looking at the
>> code appears to be benign. Thierry, Alex, is this normal/okay?
> 
> I have the same messages and asked Alexandre about them the other day. He told
> me that it looks normal.

Ok great. Hopefully, Alex can ACK then.

Cheers
Jon

-- 
nvpublic

Re: [PATCH] ARM: tegra: nyan: Enable GPU node and related supply

[Alexandre Courbot]

On Wed, Sep 21, 2016 at 4:57 PM, Jon Hunter <jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org> wrote:
>
> On 20/09/16 19:17, Paul Kocialkowski wrote:
>> * PGP Signed by an unknown key
>>
>> Le mardi 20 septembre 2016 à 13:24 +0100, Jon Hunter a écrit :
>>> On 18/09/16 15:13, Paul Kocialkowski wrote:
>>>>
>>>> This enables the GPU node for tegra124 nyan boards, which is required to
>>>> get graphics acceleration with nouveau on these devices.
>>>>
>>>> Signed-off-by: Paul Kocialkowski <contact-W9ppeneeCTY@public.gmane.org>
>>>> ---
>>>>  arch/arm/boot/dts/tegra124-nyan.dtsi | 8 +++++++-
>>>>  1 file changed, 7 insertions(+), 1 deletion(-)
>>>>
>>>> diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi
>>>> b/arch/arm/boot/dts/tegra124-nyan.dtsi
>>>> index dab9509..225ca77 100644
>>>> --- a/arch/arm/boot/dts/tegra124-nyan.dtsi
>>>> +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi
>>>> @@ -42,6 +42,12 @@
>>>>             };
>>>>     };
>>>>
>>>> +   gpu@0,57000000 {
>>>> +           status = "okay";
>>>> +
>>>> +           vdd-supply = <&vdd_gpu>;
>>>> +   };
>>>> +
>>>>     serial@70006000 {
>>>>             /* Debug connector on the bottom of the board near SD card.
>>>> */
>>>>             status = "okay";
>>>> @@ -214,7 +220,7 @@
>>>>                                     regulator-always-on;
>>>>                             };
>>>>
>>>> -                           sd6 {
>>>> +                           vdd_gpu: sd6 {
>>>>                                     regulator-name = "+VDD_GPU_AP";
>>>>                                     regulator-min-microvolt = <650000>;
>>>>                                     regulator-max-microvolt =
>>>> <1200000>;
>>>>
>>>
>>> Looks good to me. I see the following error when booting but looking at the
>>> code appears to be benign. Thierry, Alex, is this normal/okay?
>>
>> I have the same messages and asked Alexandre about them the other day. He told
>> me that it looks normal.
>
> Ok great. Hopefully, Alex can ACK then.

Apologies for the (very) delayed reply.

Yes, the messages you are seeing are part of the normal probe sequence
on Tegra. So this looks good to me.

Acked-by: Alexandre Courbot <acourbot-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH] ARM: tegra: nyan: Enable GPU node and related supply

[Alexandre Courbot]

On Wed, Sep 21, 2016 at 4:57 PM, Jon Hunter <jonathanh@nvidia.com> wrote:
>
> On 20/09/16 19:17, Paul Kocialkowski wrote:
>> * PGP Signed by an unknown key
>>
>> Le mardi 20 septembre 2016 à 13:24 +0100, Jon Hunter a écrit :
>>> On 18/09/16 15:13, Paul Kocialkowski wrote:
>>>>
>>>> This enables the GPU node for tegra124 nyan boards, which is required to
>>>> get graphics acceleration with nouveau on these devices.
>>>>
>>>> Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
>>>> ---
>>>>  arch/arm/boot/dts/tegra124-nyan.dtsi | 8 +++++++-
>>>>  1 file changed, 7 insertions(+), 1 deletion(-)
>>>>
>>>> diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi
>>>> b/arch/arm/boot/dts/tegra124-nyan.dtsi
>>>> index dab9509..225ca77 100644
>>>> --- a/arch/arm/boot/dts/tegra124-nyan.dtsi
>>>> +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi
>>>> @@ -42,6 +42,12 @@
>>>>             };
>>>>     };
>>>>
>>>> +   gpu@0,57000000 {
>>>> +           status = "okay";
>>>> +
>>>> +           vdd-supply = <&vdd_gpu>;
>>>> +   };
>>>> +
>>>>     serial@70006000 {
>>>>             /* Debug connector on the bottom of the board near SD card.
>>>> */
>>>>             status = "okay";
>>>> @@ -214,7 +220,7 @@
>>>>                                     regulator-always-on;
>>>>                             };
>>>>
>>>> -                           sd6 {
>>>> +                           vdd_gpu: sd6 {
>>>>                                     regulator-name = "+VDD_GPU_AP";
>>>>                                     regulator-min-microvolt = <650000>;
>>>>                                     regulator-max-microvolt =
>>>> <1200000>;
>>>>
>>>
>>> Looks good to me. I see the following error when booting but looking at the
>>> code appears to be benign. Thierry, Alex, is this normal/okay?
>>
>> I have the same messages and asked Alexandre about them the other day. He told
>> me that it looks normal.
>
> Ok great. Hopefully, Alex can ACK then.

Apologies for the (very) delayed reply.

Yes, the messages you are seeing are part of the normal probe sequence
on Tegra. So this looks good to me.

Acked-by: Alexandre Courbot <acourbot@nvidia.com>

[PATCH] ARM: tegra: nyan: Enable GPU node and related supply

[Alexandre Courbot]

On Wed, Sep 21, 2016 at 4:57 PM, Jon Hunter <jonathanh@nvidia.com> wrote:
>
> On 20/09/16 19:17, Paul Kocialkowski wrote:
>> * PGP Signed by an unknown key
>>
>> Le mardi 20 septembre 2016 ? 13:24 +0100, Jon Hunter a ?crit :
>>> On 18/09/16 15:13, Paul Kocialkowski wrote:
>>>>
>>>> This enables the GPU node for tegra124 nyan boards, which is required to
>>>> get graphics acceleration with nouveau on these devices.
>>>>
>>>> Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
>>>> ---
>>>>  arch/arm/boot/dts/tegra124-nyan.dtsi | 8 +++++++-
>>>>  1 file changed, 7 insertions(+), 1 deletion(-)
>>>>
>>>> diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi
>>>> b/arch/arm/boot/dts/tegra124-nyan.dtsi
>>>> index dab9509..225ca77 100644
>>>> --- a/arch/arm/boot/dts/tegra124-nyan.dtsi
>>>> +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi
>>>> @@ -42,6 +42,12 @@
>>>>             };
>>>>     };
>>>>
>>>> +   gpu at 0,57000000 {
>>>> +           status = "okay";
>>>> +
>>>> +           vdd-supply = <&vdd_gpu>;
>>>> +   };
>>>> +
>>>>     serial at 70006000 {
>>>>             /* Debug connector on the bottom of the board near SD card.
>>>> */
>>>>             status = "okay";
>>>> @@ -214,7 +220,7 @@
>>>>                                     regulator-always-on;
>>>>                             };
>>>>
>>>> -                           sd6 {
>>>> +                           vdd_gpu: sd6 {
>>>>                                     regulator-name = "+VDD_GPU_AP";
>>>>                                     regulator-min-microvolt = <650000>;
>>>>                                     regulator-max-microvolt =
>>>> <1200000>;
>>>>
>>>
>>> Looks good to me. I see the following error when booting but looking at the
>>> code appears to be benign. Thierry, Alex, is this normal/okay?
>>
>> I have the same messages and asked Alexandre about them the other day. He told
>> me that it looks normal.
>
> Ok great. Hopefully, Alex can ACK then.

Apologies for the (very) delayed reply.

Yes, the messages you are seeing are part of the normal probe sequence
on Tegra. So this looks good to me.

Acked-by: Alexandre Courbot <acourbot@nvidia.com>

Re: [PATCH] ARM: tegra: nyan: Enable GPU node and related supply

[Jon Hunter]

Thierry,

On 07/11/16 12:51, Alexandre Courbot wrote:
> On Wed, Sep 21, 2016 at 4:57 PM, Jon Hunter <jonathanh@nvidia.com> wrote:
>>
>> On 20/09/16 19:17, Paul Kocialkowski wrote:
>>> * PGP Signed by an unknown key
>>>
>>> Le mardi 20 septembre 2016 à 13:24 +0100, Jon Hunter a écrit :
>>>> On 18/09/16 15:13, Paul Kocialkowski wrote:
>>>>>
>>>>> This enables the GPU node for tegra124 nyan boards, which is required to
>>>>> get graphics acceleration with nouveau on these devices.
>>>>>
>>>>> Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
>>>>> ---
>>>>>  arch/arm/boot/dts/tegra124-nyan.dtsi | 8 +++++++-
>>>>>  1 file changed, 7 insertions(+), 1 deletion(-)
>>>>>
>>>>> diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi
>>>>> b/arch/arm/boot/dts/tegra124-nyan.dtsi
>>>>> index dab9509..225ca77 100644
>>>>> --- a/arch/arm/boot/dts/tegra124-nyan.dtsi
>>>>> +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi
>>>>> @@ -42,6 +42,12 @@
>>>>>             };
>>>>>     };
>>>>>
>>>>> +   gpu@0,57000000 {
>>>>> +           status = "okay";
>>>>> +
>>>>> +           vdd-supply = <&vdd_gpu>;
>>>>> +   };
>>>>> +
>>>>>     serial@70006000 {
>>>>>             /* Debug connector on the bottom of the board near SD card.
>>>>> */
>>>>>             status = "okay";
>>>>> @@ -214,7 +220,7 @@
>>>>>                                     regulator-always-on;
>>>>>                             };
>>>>>
>>>>> -                           sd6 {
>>>>> +                           vdd_gpu: sd6 {
>>>>>                                     regulator-name = "+VDD_GPU_AP";
>>>>>                                     regulator-min-microvolt = <650000>;
>>>>>                                     regulator-max-microvolt =
>>>>> <1200000>;
>>>>>
>>>>
>>>> Looks good to me. I see the following error when booting but looking at the
>>>> code appears to be benign. Thierry, Alex, is this normal/okay?
>>>
>>> I have the same messages and asked Alexandre about them the other day. He told
>>> me that it looks normal.
>>
>> Ok great. Hopefully, Alex can ACK then.
> 
> Apologies for the (very) delayed reply.
> 
> Yes, the messages you are seeing are part of the normal probe sequence
> on Tegra. So this looks good to me.
> 
> Acked-by: Alexandre Courbot <acourbot@nvidia.com>

Can you pick this one up for v4.10 as well?

Cheers
Jon

-- 
nvpublic

Re: [PATCH] ARM: tegra: nyan: Enable GPU node and related supply

[Jon Hunter]

Thierry,

On 07/11/16 12:51, Alexandre Courbot wrote:
> On Wed, Sep 21, 2016 at 4:57 PM, Jon Hunter <jonathanh@nvidia.com> wrote:
>>
>> On 20/09/16 19:17, Paul Kocialkowski wrote:
>>> * PGP Signed by an unknown key
>>>
>>> Le mardi 20 septembre 2016 à 13:24 +0100, Jon Hunter a écrit :
>>>> On 18/09/16 15:13, Paul Kocialkowski wrote:
>>>>>
>>>>> This enables the GPU node for tegra124 nyan boards, which is required to
>>>>> get graphics acceleration with nouveau on these devices.
>>>>>
>>>>> Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
>>>>> ---
>>>>>  arch/arm/boot/dts/tegra124-nyan.dtsi | 8 +++++++-
>>>>>  1 file changed, 7 insertions(+), 1 deletion(-)
>>>>>
>>>>> diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi
>>>>> b/arch/arm/boot/dts/tegra124-nyan.dtsi
>>>>> index dab9509..225ca77 100644
>>>>> --- a/arch/arm/boot/dts/tegra124-nyan.dtsi
>>>>> +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi
>>>>> @@ -42,6 +42,12 @@
>>>>>             };
>>>>>     };
>>>>>
>>>>> +   gpu@0,57000000 {
>>>>> +           status = "okay";
>>>>> +
>>>>> +           vdd-supply = <&vdd_gpu>;
>>>>> +   };
>>>>> +
>>>>>     serial@70006000 {
>>>>>             /* Debug connector on the bottom of the board near SD card.
>>>>> */
>>>>>             status = "okay";
>>>>> @@ -214,7 +220,7 @@
>>>>>                                     regulator-always-on;
>>>>>                             };
>>>>>
>>>>> -                           sd6 {
>>>>> +                           vdd_gpu: sd6 {
>>>>>                                     regulator-name = "+VDD_GPU_AP";
>>>>>                                     regulator-min-microvolt = <650000>;
>>>>>                                     regulator-max-microvolt =
>>>>> <1200000>;
>>>>>
>>>>
>>>> Looks good to me. I see the following error when booting but looking at the
>>>> code appears to be benign. Thierry, Alex, is this normal/okay?
>>>
>>> I have the same messages and asked Alexandre about them the other day. He told
>>> me that it looks normal.
>>
>> Ok great. Hopefully, Alex can ACK then.
> 
> Apologies for the (very) delayed reply.
> 
> Yes, the messages you are seeing are part of the normal probe sequence
> on Tegra. So this looks good to me.
> 
> Acked-by: Alexandre Courbot <acourbot@nvidia.com>

Can you pick this one up for v4.10 as well?

Cheers
Jon

-- 
nvpublic

[PATCH] ARM: tegra: nyan: Enable GPU node and related supply

[Jon Hunter]

Thierry,

On 07/11/16 12:51, Alexandre Courbot wrote:
> On Wed, Sep 21, 2016 at 4:57 PM, Jon Hunter <jonathanh@nvidia.com> wrote:
>>
>> On 20/09/16 19:17, Paul Kocialkowski wrote:
>>> * PGP Signed by an unknown key
>>>
>>> Le mardi 20 septembre 2016 ? 13:24 +0100, Jon Hunter a ?crit :
>>>> On 18/09/16 15:13, Paul Kocialkowski wrote:
>>>>>
>>>>> This enables the GPU node for tegra124 nyan boards, which is required to
>>>>> get graphics acceleration with nouveau on these devices.
>>>>>
>>>>> Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
>>>>> ---
>>>>>  arch/arm/boot/dts/tegra124-nyan.dtsi | 8 +++++++-
>>>>>  1 file changed, 7 insertions(+), 1 deletion(-)
>>>>>
>>>>> diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi
>>>>> b/arch/arm/boot/dts/tegra124-nyan.dtsi
>>>>> index dab9509..225ca77 100644
>>>>> --- a/arch/arm/boot/dts/tegra124-nyan.dtsi
>>>>> +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi
>>>>> @@ -42,6 +42,12 @@
>>>>>             };
>>>>>     };
>>>>>
>>>>> +   gpu at 0,57000000 {
>>>>> +           status = "okay";
>>>>> +
>>>>> +           vdd-supply = <&vdd_gpu>;
>>>>> +   };
>>>>> +
>>>>>     serial at 70006000 {
>>>>>             /* Debug connector on the bottom of the board near SD card.
>>>>> */
>>>>>             status = "okay";
>>>>> @@ -214,7 +220,7 @@
>>>>>                                     regulator-always-on;
>>>>>                             };
>>>>>
>>>>> -                           sd6 {
>>>>> +                           vdd_gpu: sd6 {
>>>>>                                     regulator-name = "+VDD_GPU_AP";
>>>>>                                     regulator-min-microvolt = <650000>;
>>>>>                                     regulator-max-microvolt =
>>>>> <1200000>;
>>>>>
>>>>
>>>> Looks good to me. I see the following error when booting but looking at the
>>>> code appears to be benign. Thierry, Alex, is this normal/okay?
>>>
>>> I have the same messages and asked Alexandre about them the other day. He told
>>> me that it looks normal.
>>
>> Ok great. Hopefully, Alex can ACK then.
> 
> Apologies for the (very) delayed reply.
> 
> Yes, the messages you are seeing are part of the normal probe sequence
> on Tegra. So this looks good to me.
> 
> Acked-by: Alexandre Courbot <acourbot@nvidia.com>

Can you pick this one up for v4.10 as well?

Cheers
Jon

-- 
nvpublic

Re: [PATCH] ARM: tegra: nyan: Enable GPU node and related supply

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 426 bytes --]

On Sun, Sep 18, 2016 at 04:13:11PM +0200, Paul Kocialkowski wrote:
> This enables the GPU node for tegra124 nyan boards, which is required to
> get graphics acceleration with nouveau on these devices.
> 
> Signed-off-by: Paul Kocialkowski <contact-W9ppeneeCTY@public.gmane.org>
> ---
>  arch/arm/boot/dts/tegra124-nyan.dtsi | 8 +++++++-
>  1 file changed, 7 insertions(+), 1 deletion(-)

Applied, thanks.

Thierry

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 801 bytes --]

Re: [PATCH] ARM: tegra: nyan: Enable GPU node and related supply

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 406 bytes --]

On Sun, Sep 18, 2016 at 04:13:11PM +0200, Paul Kocialkowski wrote:
> This enables the GPU node for tegra124 nyan boards, which is required to
> get graphics acceleration with nouveau on these devices.
> 
> Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
> ---
>  arch/arm/boot/dts/tegra124-nyan.dtsi | 8 +++++++-
>  1 file changed, 7 insertions(+), 1 deletion(-)

Applied, thanks.

Thierry

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 801 bytes --]

[PATCH] ARM: tegra: nyan: Enable GPU node and related supply

[Thierry Reding]

On Sun, Sep 18, 2016 at 04:13:11PM +0200, Paul Kocialkowski wrote:
> This enables the GPU node for tegra124 nyan boards, which is required to
> get graphics acceleration with nouveau on these devices.
> 
> Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
> ---
>  arch/arm/boot/dts/tegra124-nyan.dtsi | 8 +++++++-
>  1 file changed, 7 insertions(+), 1 deletion(-)

Applied, thanks.

Thierry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20161107/edbcbb97/attachment.sig>