All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Jean Delvare" <khali@linux-fr.org>
To: yani.ioannou@gmail.com
Cc: "Greg KH" <greg@kroah.com>, LKML <linux-kernel@vger.kernel.org>,
	LM Sensors <lm-sensors@lm-sensors.org>
Subject: Re: [lm-sensors] [PATCH 2.6.12-rc4 15/15] drivers/i2c/chips/adm1026.c: use dynamic sysfs callbacks
Date: Tue, 17 May 2005 13:04:39 +0200 (CEST)	[thread overview]
Message-ID: <e9iUj0EZ.1116327879.1515720.khali@localhost> (raw)
In-Reply-To: <2538186705051703479bd0c29@mail.gmail.com>


Hi Yani,

> Again I'd prefer someone test this particular patch before it be
> applied, because I haven't got an adm1026 to test it with :-).

If you could come up with an additional demonstration patch for either
the lm90 driver or the it87 driver, I would happily give it a try. The
adm1026 has very few users AFAIK so it might not be the best choice to
find testers, although I agree that it was a convenient way to
demonstrate how drivers could benefit from the proposed change.

And, once again, thanks *a lot* for looking into this, this is very much
appreciated.

--
Jean Delvare

WARNING: multiple messages have this Message-ID (diff)
From: khali@linux-fr.org (Jean Delvare)
To: yani.ioannou@gmail.com
Cc: Greg KH <greg@kroah.com>, LKML <linux-kernel@vger.kernel.org>,
	LM Sensors <lm-sensors@lm-sensors.org>
Subject: [lm-sensors] [PATCH 2.6.12-rc4 15/15]
Date: Thu, 19 May 2005 06:25:59 +0000	[thread overview]
Message-ID: <e9iUj0EZ.1116327879.1515720.khali@localhost> (raw)
In-Reply-To: <2538186705051703479bd0c29@mail.gmail.com>


Hi Yani,

> Again I'd prefer someone test this particular patch before it be
> applied, because I haven't got an adm1026 to test it with :-).

If you could come up with an additional demonstration patch for either
the lm90 driver or the it87 driver, I would happily give it a try. The
adm1026 has very few users AFAIK so it might not be the best choice to
find testers, although I agree that it was a convenient way to
demonstrate how drivers could benefit from the proposed change.

And, once again, thanks *a lot* for looking into this, this is very much
appreciated.

--
Jean Delvare

_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

  reply	other threads:[~2005-05-17 11:25 UTC|newest]

Thread overview: 50+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-05-17 10:47 [PATCH 2.6.12-rc4 15/15] drivers/i2c/chips/adm1026.c: use dynamic sysfs callbacks Yani Ioannou
2005-05-19  6:25 ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] drivers/i2c/chips/adm1026.c: Yani Ioannou
2005-05-17 11:04 ` Jean Delvare [this message]
2005-05-19  6:25   ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] Jean Delvare
2005-05-17 11:18   ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] drivers/i2c/chips/adm1026.c: use dynamic sysfs callbacks Yani Ioannou
2005-05-19  6:25     ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] Yani Ioannou
2005-05-17 20:23     ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] drivers/i2c/chips/adm1026.c: use dynamic sysfs callbacks Grant Coady
2005-05-19  6:25       ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] Grant Coady
2005-05-17 20:56       ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] drivers/i2c/chips/adm1026.c: use dynamic sysfs callbacks Yani Ioannou
2005-05-19  6:25         ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] Yani Ioannou
2005-05-17 23:13         ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] drivers/i2c/chips/adm1026.c: use dynamic sysfs callbacks Grant Coady
2005-05-19  6:25           ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] Grant Coady
2005-05-17 23:21           ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] drivers/i2c/chips/adm1026.c: use dynamic sysfs callbacks Yani Ioannou
2005-05-19  6:25             ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] Yani Ioannou
2005-05-18  1:58             ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] drivers/i2c/chips/adm1026.c: use dynamic sysfs callbacks Grant Coady
2005-05-19  6:25               ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] Grant Coady
2005-05-19  6:25   ` Yani Ioannou
2005-05-19 20:02     ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] drivers/i2c/chips/adm1026.c: use dynamic sysfs callbacks Jean Delvare
2005-05-19 22:03       ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] Jean Delvare
2005-05-19 20:52       ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] drivers/i2c/chips/adm1026.c: use dynamic sysfs callbacks Greg KH
2005-05-19 22:47         ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] Greg KH
2005-05-19 20:57         ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] drivers/i2c/chips/adm1026.c: use dynamic sysfs callbacks Jean Delvare
2005-05-19 22:57           ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] Jean Delvare
2005-05-19 21:35           ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] drivers/i2c/chips/adm1026.c: use dynamic sysfs callbacks Greg KH
2005-05-19 23:30             ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] Greg KH
2005-05-20  7:46             ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] drivers/i2c/chips/adm1026.c: use dynamic sysfs callbacks Jean Delvare
2005-05-20  9:54               ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] Jean Delvare
2005-05-20  8:53               ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] drivers/i2c/chips/adm1026.c: use dynamic sysfs callbacks Yani Ioannou
2005-05-20 10:53                 ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] Yani Ioannou
2005-05-22  1:58                 ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] drivers/i2c/chips/adm1026.c: use dynamic sysfs callbacks Dmitry Torokhov
2005-05-22  3:59                   ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] Dmitry Torokhov
2005-05-22  6:50                   ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] drivers/i2c/chips/adm1026.c: use dynamic sysfs callbacks Jean Delvare
2005-05-22  8:51                     ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] Jean Delvare
2005-05-22  7:04                     ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] drivers/i2c/chips/adm1026.c: use dynamic sysfs callbacks Dmitry Torokhov
2005-05-22  9:05                       ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] Dmitry Torokhov
2005-05-22 12:15                       ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] drivers/i2c/chips/adm1026.c: use dynamic sysfs callbacks Yani Ioannou
2005-05-22 14:17                         ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] Yani Ioannou
2005-05-22 12:32                         ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] drivers/i2c/chips/adm1026.c: use dynamic sysfs callbacks Jean Delvare
2005-05-22 14:33                           ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] Jean Delvare
2005-05-22 13:05                           ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] drivers/i2c/chips/adm1026.c: use dynamic sysfs callbacks Yani Ioannou
2005-05-22 15:05                             ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] Yani Ioannou
2005-05-22 13:39                             ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] drivers/i2c/chips/adm1026.c: use dynamic sysfs callbacks Jean Delvare
2005-05-22 15:39                               ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] Jean Delvare
2005-05-19 21:14       ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] drivers/i2c/chips/adm1026.c: use dynamic sysfs callbacks Yani Ioannou
2005-05-19 23:15         ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] Yani Ioannou
2005-05-20  8:01   ` Grant Coady
2005-06-05  8:51 ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] drivers/i2c/chips/adm1026.c: use dynamic sysfs callbacks Jean Delvare
2005-06-05 10:51   ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] Jean Delvare
2005-06-06  6:14   ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] drivers/i2c/chips/adm1026.c: use dynamic sysfs callbacks Greg KH
2005-06-06  9:17     ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] Greg KH

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=e9iUj0EZ.1116327879.1515720.khali@localhost \
    --to=khali@linux-fr.org \
    --cc=greg@kroah.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lm-sensors@lm-sensors.org \
    --cc=yani.ioannou@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.