[PATCH 00/11] thermal: clean up output of make W=1

[PATCH 00/11] thermal: clean up output of make W=1

[Amit Kucheria]

Cleanup output of make W=1 inside drivers/thermal. This should allow us to
focus on real issues that tend to get lost in the noise much better.

There is no functional change. This series was generate on top of
linux-next from 20191105.

Regards,
Amit

Amit Kucheria (11):
  thermal: of-thermal: Appease the kernel-doc deity
  thermal: cpu_cooling: Appease the kernel-doc deity
  thermal: step_wise: Appease the kernel-doc deity
  thermal: devfreq_cooling: Appease the kernel-doc deity
  thermal: max77620: Appease the kernel-doc deity
  thermal: mediatek: Appease the kernel-doc deity
  thermal: rockchip: Appease the kernel-doc deity
  thermal: samsung: Appease the kernel-doc deity
  thermal: tegra: Appease the kernel-doc deity
  thermal: amlogic: Appease the kernel-doc deity
  thermal: zx2967: Appease the kernel-doc deity

 drivers/thermal/amlogic_thermal.c    |  6 +++++-
 drivers/thermal/cpu_cooling.c        |  1 +
 drivers/thermal/devfreq_cooling.c    |  3 ++-
 drivers/thermal/fair_share.c         |  4 ++--
 drivers/thermal/gov_bang_bang.c      |  4 ++--
 drivers/thermal/max77620_thermal.c   |  2 +-
 drivers/thermal/mtk_thermal.c        | 12 ++++++------
 drivers/thermal/of-thermal.c         |  2 +-
 drivers/thermal/rockchip_thermal.c   | 22 ++++++++++++++++------
 drivers/thermal/samsung/exynos_tmu.c |  5 ++++-
 drivers/thermal/step_wise.c          |  4 ++--
 drivers/thermal/tegra/soctherm.c     | 15 +++++++++++++--
 drivers/thermal/user_space.c         |  4 ++--
 drivers/thermal/zx2967_thermal.c     |  1 +
 14 files changed, 58 insertions(+), 27 deletions(-)

-- 
2.17.1

[PATCH 00/11] thermal: clean up output of make W=1

[Amit Kucheria]

Cleanup output of make W=1 inside drivers/thermal. This should allow us to
focus on real issues that tend to get lost in the noise much better.

There is no functional change. This series was generate on top of
linux-next from 20191105.

Regards,
Amit

Amit Kucheria (11):
  thermal: of-thermal: Appease the kernel-doc deity
  thermal: cpu_cooling: Appease the kernel-doc deity
  thermal: step_wise: Appease the kernel-doc deity
  thermal: devfreq_cooling: Appease the kernel-doc deity
  thermal: max77620: Appease the kernel-doc deity
  thermal: mediatek: Appease the kernel-doc deity
  thermal: rockchip: Appease the kernel-doc deity
  thermal: samsung: Appease the kernel-doc deity
  thermal: tegra: Appease the kernel-doc deity
  thermal: amlogic: Appease the kernel-doc deity
  thermal: zx2967: Appease the kernel-doc deity

 drivers/thermal/amlogic_thermal.c    |  6 +++++-
 drivers/thermal/cpu_cooling.c        |  1 +
 drivers/thermal/devfreq_cooling.c    |  3 ++-
 drivers/thermal/fair_share.c         |  4 ++--
 drivers/thermal/gov_bang_bang.c      |  4 ++--
 drivers/thermal/max77620_thermal.c   |  2 +-
 drivers/thermal/mtk_thermal.c        | 12 ++++++------
 drivers/thermal/of-thermal.c         |  2 +-
 drivers/thermal/rockchip_thermal.c   | 22 ++++++++++++++++------
 drivers/thermal/samsung/exynos_tmu.c |  5 ++++-
 drivers/thermal/step_wise.c          |  4 ++--
 drivers/thermal/tegra/soctherm.c     | 15 +++++++++++++--
 drivers/thermal/user_space.c         |  4 ++--
 drivers/thermal/zx2967_thermal.c     |  1 +
 14 files changed, 58 insertions(+), 27 deletions(-)

-- 
2.17.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 00/11] thermal: clean up output of make W=1

[Amit Kucheria]

Cleanup output of make W=1 inside drivers/thermal. This should allow us to
focus on real issues that tend to get lost in the noise much better.

There is no functional change. This series was generate on top of
linux-next from 20191105.

Regards,
Amit

Amit Kucheria (11):
  thermal: of-thermal: Appease the kernel-doc deity
  thermal: cpu_cooling: Appease the kernel-doc deity
  thermal: step_wise: Appease the kernel-doc deity
  thermal: devfreq_cooling: Appease the kernel-doc deity
  thermal: max77620: Appease the kernel-doc deity
  thermal: mediatek: Appease the kernel-doc deity
  thermal: rockchip: Appease the kernel-doc deity
  thermal: samsung: Appease the kernel-doc deity
  thermal: tegra: Appease the kernel-doc deity
  thermal: amlogic: Appease the kernel-doc deity
  thermal: zx2967: Appease the kernel-doc deity

 drivers/thermal/amlogic_thermal.c    |  6 +++++-
 drivers/thermal/cpu_cooling.c        |  1 +
 drivers/thermal/devfreq_cooling.c    |  3 ++-
 drivers/thermal/fair_share.c         |  4 ++--
 drivers/thermal/gov_bang_bang.c      |  4 ++--
 drivers/thermal/max77620_thermal.c   |  2 +-
 drivers/thermal/mtk_thermal.c        | 12 ++++++------
 drivers/thermal/of-thermal.c         |  2 +-
 drivers/thermal/rockchip_thermal.c   | 22 ++++++++++++++++------
 drivers/thermal/samsung/exynos_tmu.c |  5 ++++-
 drivers/thermal/step_wise.c          |  4 ++--
 drivers/thermal/tegra/soctherm.c     | 15 +++++++++++++--
 drivers/thermal/user_space.c         |  4 ++--
 drivers/thermal/zx2967_thermal.c     |  1 +
 14 files changed, 58 insertions(+), 27 deletions(-)

-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 00/11] thermal: clean up output of make W=1

[Amit Kucheria]

Cleanup output of make W=1 inside drivers/thermal. This should allow us to
focus on real issues that tend to get lost in the noise much better.

There is no functional change. This series was generate on top of
linux-next from 20191105.

Regards,
Amit

Amit Kucheria (11):
  thermal: of-thermal: Appease the kernel-doc deity
  thermal: cpu_cooling: Appease the kernel-doc deity
  thermal: step_wise: Appease the kernel-doc deity
  thermal: devfreq_cooling: Appease the kernel-doc deity
  thermal: max77620: Appease the kernel-doc deity
  thermal: mediatek: Appease the kernel-doc deity
  thermal: rockchip: Appease the kernel-doc deity
  thermal: samsung: Appease the kernel-doc deity
  thermal: tegra: Appease the kernel-doc deity
  thermal: amlogic: Appease the kernel-doc deity
  thermal: zx2967: Appease the kernel-doc deity

 drivers/thermal/amlogic_thermal.c    |  6 +++++-
 drivers/thermal/cpu_cooling.c        |  1 +
 drivers/thermal/devfreq_cooling.c    |  3 ++-
 drivers/thermal/fair_share.c         |  4 ++--
 drivers/thermal/gov_bang_bang.c      |  4 ++--
 drivers/thermal/max77620_thermal.c   |  2 +-
 drivers/thermal/mtk_thermal.c        | 12 ++++++------
 drivers/thermal/of-thermal.c         |  2 +-
 drivers/thermal/rockchip_thermal.c   | 22 ++++++++++++++++------
 drivers/thermal/samsung/exynos_tmu.c |  5 ++++-
 drivers/thermal/step_wise.c          |  4 ++--
 drivers/thermal/tegra/soctherm.c     | 15 +++++++++++++--
 drivers/thermal/user_space.c         |  4 ++--
 drivers/thermal/zx2967_thermal.c     |  1 +
 14 files changed, 58 insertions(+), 27 deletions(-)

-- 
2.17.1


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH 01/11] thermal: of-thermal: Appease the kernel-doc deity

[Amit Kucheria]

Replace a comment starting with /** by simply /* to avoid having
it interpreted as a kernel-doc comment.

Fixes the following warning when compile with make W=1:
linux.git/drivers/thermal/of-thermal.c:761: warning: cannot understand function prototype: 'const char *trip_types[] = '

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
---
 drivers/thermal/of-thermal.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/thermal/of-thermal.c b/drivers/thermal/of-thermal.c
index dc5093be553ec..5235aed2fadd5 100644
--- a/drivers/thermal/of-thermal.c
+++ b/drivers/thermal/of-thermal.c
@@ -754,7 +754,7 @@ static int thermal_of_populate_bind_params(struct device_node *np,
 	return ret;
 }
 
-/**
+/*
  * It maps 'enum thermal_trip_type' found in include/linux/thermal.h
  * into the device tree binding of 'trip', property type.
  */
-- 
2.17.1

Re: [PATCH 01/11] thermal: of-thermal: Appease the kernel-doc deity

[Viresh Kumar]

On 06-11-19, 18:58, Amit Kucheria wrote:
> Replace a comment starting with /** by simply /* to avoid having
> it interpreted as a kernel-doc comment.
> 
> Fixes the following warning when compile with make W=1:
> linux.git/drivers/thermal/of-thermal.c:761: warning: cannot understand function prototype: 'const char *trip_types[] = '
> 
> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
> ---
>  drivers/thermal/of-thermal.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/thermal/of-thermal.c b/drivers/thermal/of-thermal.c
> index dc5093be553ec..5235aed2fadd5 100644
> --- a/drivers/thermal/of-thermal.c
> +++ b/drivers/thermal/of-thermal.c
> @@ -754,7 +754,7 @@ static int thermal_of_populate_bind_params(struct device_node *np,
>  	return ret;
>  }
>  
> -/**
> +/*
>   * It maps 'enum thermal_trip_type' found in include/linux/thermal.h
>   * into the device tree binding of 'trip', property type.
>   */

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>

-- 
viresh

[PATCH 02/11] thermal: cpu_cooling: Appease the kernel-doc deity

[Amit Kucheria]

Describe the function parameter to fix the following warning with make
W=1:

linux.git/drivers/thermal/cpu_cooling.c:92: warning: Function parameter
or member 'qos_req' not described in 'cpufreq_cooling_device'

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
---
 drivers/thermal/cpu_cooling.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c
index 6b9865c786ba3..c1523b9d06954 100644
--- a/drivers/thermal/cpu_cooling.c
+++ b/drivers/thermal/cpu_cooling.c
@@ -75,6 +75,7 @@ struct time_in_idle {
  * @policy: cpufreq policy.
  * @node: list_head to link all cpufreq_cooling_device together.
  * @idle_time: idle time stats
+ * @qos_req: PM QoS contraint to apply
  *
  * This structure is required for keeping information of each registered
  * cpufreq_cooling_device.
-- 
2.17.1

Re: [PATCH 02/11] thermal: cpu_cooling: Appease the kernel-doc deity

[Viresh Kumar]

On 06-11-19, 18:58, Amit Kucheria wrote:
> Describe the function parameter to fix the following warning with make
> W=1:
> 
> linux.git/drivers/thermal/cpu_cooling.c:92: warning: Function parameter
> or member 'qos_req' not described in 'cpufreq_cooling_device'
> 
> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
> ---
>  drivers/thermal/cpu_cooling.c | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c
> index 6b9865c786ba3..c1523b9d06954 100644
> --- a/drivers/thermal/cpu_cooling.c
> +++ b/drivers/thermal/cpu_cooling.c
> @@ -75,6 +75,7 @@ struct time_in_idle {
>   * @policy: cpufreq policy.
>   * @node: list_head to link all cpufreq_cooling_device together.
>   * @idle_time: idle time stats
> + * @qos_req: PM QoS contraint to apply
>   *
>   * This structure is required for keeping information of each registered
>   * cpufreq_cooling_device.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>

-- 
viresh

[PATCH 03/11] thermal: step_wise: Appease the kernel-doc deity

[Amit Kucheria]

Replace - with : to appease the kernel-doc gods and fix warnings such as
the following when compiled with make W=1:

linux-amit.git/drivers/thermal/step_wise.c:187: warning: Function
parameter or member 'tz' not described in 'step_wise_throttle'
linux-amit.git/drivers/thermal/step_wise.c:187: warning: Function
parameter or member 'trip' not described in 'step_wise_throttle'

linux.git/drivers/thermal/fair_share.c:79: warning: Function parameter
or member 'tz' not described in 'fair_share_throttle'
linux.git/drivers/thermal/fair_share.c:79: warning: Function parameter
or member 'trip' not described in 'fair_share_throttle'

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
---
 drivers/thermal/fair_share.c    | 4 ++--
 drivers/thermal/gov_bang_bang.c | 4 ++--
 drivers/thermal/step_wise.c     | 4 ++--
 drivers/thermal/user_space.c    | 4 ++--
 4 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/thermal/fair_share.c b/drivers/thermal/fair_share.c
index afd99f668c65d..aaa07180ab482 100644
--- a/drivers/thermal/fair_share.c
+++ b/drivers/thermal/fair_share.c
@@ -58,8 +58,8 @@ static long get_target_state(struct thermal_zone_device *tz,
 
 /**
  * fair_share_throttle - throttles devices associated with the given zone
- * @tz - thermal_zone_device
- * @trip - trip point index
+ * @tz: thermal_zone_device
+ * @trip: trip point index
  *
  * Throttling Logic: This uses three parameters to calculate the new
  * throttle state of the cooling devices associated with the given zone.
diff --git a/drivers/thermal/gov_bang_bang.c b/drivers/thermal/gov_bang_bang.c
index b831fc77cf64a..991a1c54296de 100644
--- a/drivers/thermal/gov_bang_bang.c
+++ b/drivers/thermal/gov_bang_bang.c
@@ -71,8 +71,8 @@ static void thermal_zone_trip_update(struct thermal_zone_device *tz, int trip)
 
 /**
  * bang_bang_control - controls devices associated with the given zone
- * @tz - thermal_zone_device
- * @trip - the trip point
+ * @tz: thermal_zone_device
+ * @trip: the trip point
  *
  * Regulation Logic: a two point regulation, deliver cooling state depending
  * on the previous state shown in this diagram:
diff --git a/drivers/thermal/step_wise.c b/drivers/thermal/step_wise.c
index 6e051cbd824ff..2ae7198d3067c 100644
--- a/drivers/thermal/step_wise.c
+++ b/drivers/thermal/step_wise.c
@@ -174,8 +174,8 @@ static void thermal_zone_trip_update(struct thermal_zone_device *tz, int trip)
 
 /**
  * step_wise_throttle - throttles devices associated with the given zone
- * @tz - thermal_zone_device
- * @trip - trip point index
+ * @tz: thermal_zone_device
+ * @trip: trip point index
  *
  * Throttling Logic: This uses the trend of the thermal zone to throttle.
  * If the thermal zone is 'heating up' this throttles all the cooling
diff --git a/drivers/thermal/user_space.c b/drivers/thermal/user_space.c
index 962873fd92425..293cffd9c8adb 100644
--- a/drivers/thermal/user_space.c
+++ b/drivers/thermal/user_space.c
@@ -17,8 +17,8 @@
 
 /**
  * notify_user_space - Notifies user space about thermal events
- * @tz - thermal_zone_device
- * @trip - trip point index
+ * @tz: thermal_zone_device
+ * @trip: trip point index
  *
  * This function notifies the user space through UEvents.
  */
-- 
2.17.1

Re: [PATCH 03/11] thermal: step_wise: Appease the kernel-doc deity

[Viresh Kumar]

On 06-11-19, 18:58, Amit Kucheria wrote:
> Replace - with : to appease the kernel-doc gods and fix warnings such as
> the following when compiled with make W=1:
> 
> linux-amit.git/drivers/thermal/step_wise.c:187: warning: Function
> parameter or member 'tz' not described in 'step_wise_throttle'
> linux-amit.git/drivers/thermal/step_wise.c:187: warning: Function
> parameter or member 'trip' not described in 'step_wise_throttle'
> 
> linux.git/drivers/thermal/fair_share.c:79: warning: Function parameter
> or member 'tz' not described in 'fair_share_throttle'
> linux.git/drivers/thermal/fair_share.c:79: warning: Function parameter
> or member 'trip' not described in 'fair_share_throttle'
> 
> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
> ---
>  drivers/thermal/fair_share.c    | 4 ++--
>  drivers/thermal/gov_bang_bang.c | 4 ++--
>  drivers/thermal/step_wise.c     | 4 ++--
>  drivers/thermal/user_space.c    | 4 ++--
>  4 files changed, 8 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/thermal/fair_share.c b/drivers/thermal/fair_share.c
> index afd99f668c65d..aaa07180ab482 100644
> --- a/drivers/thermal/fair_share.c
> +++ b/drivers/thermal/fair_share.c
> @@ -58,8 +58,8 @@ static long get_target_state(struct thermal_zone_device *tz,
>  
>  /**
>   * fair_share_throttle - throttles devices associated with the given zone
> - * @tz - thermal_zone_device
> - * @trip - trip point index
> + * @tz: thermal_zone_device
> + * @trip: trip point index
>   *
>   * Throttling Logic: This uses three parameters to calculate the new
>   * throttle state of the cooling devices associated with the given zone.
> diff --git a/drivers/thermal/gov_bang_bang.c b/drivers/thermal/gov_bang_bang.c
> index b831fc77cf64a..991a1c54296de 100644
> --- a/drivers/thermal/gov_bang_bang.c
> +++ b/drivers/thermal/gov_bang_bang.c
> @@ -71,8 +71,8 @@ static void thermal_zone_trip_update(struct thermal_zone_device *tz, int trip)
>  
>  /**
>   * bang_bang_control - controls devices associated with the given zone
> - * @tz - thermal_zone_device
> - * @trip - the trip point
> + * @tz: thermal_zone_device
> + * @trip: the trip point
>   *
>   * Regulation Logic: a two point regulation, deliver cooling state depending
>   * on the previous state shown in this diagram:
> diff --git a/drivers/thermal/step_wise.c b/drivers/thermal/step_wise.c
> index 6e051cbd824ff..2ae7198d3067c 100644
> --- a/drivers/thermal/step_wise.c
> +++ b/drivers/thermal/step_wise.c
> @@ -174,8 +174,8 @@ static void thermal_zone_trip_update(struct thermal_zone_device *tz, int trip)
>  
>  /**
>   * step_wise_throttle - throttles devices associated with the given zone
> - * @tz - thermal_zone_device
> - * @trip - trip point index
> + * @tz: thermal_zone_device
> + * @trip: trip point index
>   *
>   * Throttling Logic: This uses the trend of the thermal zone to throttle.
>   * If the thermal zone is 'heating up' this throttles all the cooling
> diff --git a/drivers/thermal/user_space.c b/drivers/thermal/user_space.c
> index 962873fd92425..293cffd9c8adb 100644
> --- a/drivers/thermal/user_space.c
> +++ b/drivers/thermal/user_space.c
> @@ -17,8 +17,8 @@
>  
>  /**
>   * notify_user_space - Notifies user space about thermal events
> - * @tz - thermal_zone_device
> - * @trip - trip point index
> + * @tz: thermal_zone_device
> + * @trip: trip point index
>   *
>   * This function notifies the user space through UEvents.
>   */

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>

-- 
viresh

[PATCH 04/11] thermal: devfreq_cooling: Appease the kernel-doc deity

[Amit Kucheria]

Fix up the following warnings with make W=1:

linux.git/drivers/thermal/devfreq_cooling.c:593: warning: Function
parameter or member 'cdev' not described in 'devfreq_cooling_unregister'
linux.git/drivers/thermal/devfreq_cooling.c:593: warning: Excess
function parameter 'dfc' description in 'devfreq_cooling_unregister'

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
---
 drivers/thermal/devfreq_cooling.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/thermal/devfreq_cooling.c b/drivers/thermal/devfreq_cooling.c
index ef59256887ff6..a87d4fa031c87 100644
--- a/drivers/thermal/devfreq_cooling.c
+++ b/drivers/thermal/devfreq_cooling.c
@@ -53,6 +53,7 @@ static DEFINE_IDA(devfreq_ida);
  *		'utilization' (which is	'busy_time / 'total_time').
  *		The 'res_util' range is from 100 to (power_table[state] * 100)
  *		for the corresponding 'state'.
+ * @capped_state:	index to cooling state with in dynamic power budget
  */
 struct devfreq_cooling_device {
 	int id;
@@ -587,7 +588,7 @@ EXPORT_SYMBOL_GPL(devfreq_cooling_register);
 
 /**
  * devfreq_cooling_unregister() - Unregister devfreq cooling device.
- * @dfc: Pointer to devfreq cooling device to unregister.
+ * @cdev: Pointer to devfreq cooling device to unregister.
  */
 void devfreq_cooling_unregister(struct thermal_cooling_device *cdev)
 {
-- 
2.17.1

Re: [PATCH 04/11] thermal: devfreq_cooling: Appease the kernel-doc deity

[Viresh Kumar]

On 06-11-19, 18:58, Amit Kucheria wrote:
> Fix up the following warnings with make W=1:
> 
> linux.git/drivers/thermal/devfreq_cooling.c:593: warning: Function
> parameter or member 'cdev' not described in 'devfreq_cooling_unregister'
> linux.git/drivers/thermal/devfreq_cooling.c:593: warning: Excess
> function parameter 'dfc' description in 'devfreq_cooling_unregister'
> 
> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
> ---
>  drivers/thermal/devfreq_cooling.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/thermal/devfreq_cooling.c b/drivers/thermal/devfreq_cooling.c
> index ef59256887ff6..a87d4fa031c87 100644
> --- a/drivers/thermal/devfreq_cooling.c
> +++ b/drivers/thermal/devfreq_cooling.c
> @@ -53,6 +53,7 @@ static DEFINE_IDA(devfreq_ida);
>   *		'utilization' (which is	'busy_time / 'total_time').
>   *		The 'res_util' range is from 100 to (power_table[state] * 100)
>   *		for the corresponding 'state'.
> + * @capped_state:	index to cooling state with in dynamic power budget

Should there be space instead of tab after : ?

And warning in $subject doesn't talk about this change.

>   */
>  struct devfreq_cooling_device {
>  	int id;
> @@ -587,7 +588,7 @@ EXPORT_SYMBOL_GPL(devfreq_cooling_register);
>  
>  /**
>   * devfreq_cooling_unregister() - Unregister devfreq cooling device.
> - * @dfc: Pointer to devfreq cooling device to unregister.
> + * @cdev: Pointer to devfreq cooling device to unregister.
>   */
>  void devfreq_cooling_unregister(struct thermal_cooling_device *cdev)
>  {
> -- 
> 2.17.1

-- 
viresh

[PATCH 05/11] thermal: max77620: Appease the kernel-doc deity

[Amit Kucheria]

Fix up the following warning when compiled with make W=1:

linux.git/drivers/thermal/max77620_thermal.c:48: warning: Function
parameter or member 'temp' not described in 'max77620_thermal_read_temp'

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
---
 drivers/thermal/max77620_thermal.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/thermal/max77620_thermal.c b/drivers/thermal/max77620_thermal.c
index 88fd0fbe0cfac..82d06c7411eb3 100644
--- a/drivers/thermal/max77620_thermal.c
+++ b/drivers/thermal/max77620_thermal.c
@@ -33,7 +33,7 @@ struct max77620_therm_info {
 /**
  * max77620_thermal_read_temp: Read PMIC die temperatue.
  * @data:	Device specific data.
- * temp:	Temperature in millidegrees Celsius
+ * @temp:	Temperature in millidegrees Celsius
  *
  * The actual temperature of PMIC die is not available from PMIC.
  * PMIC only tells the status if it has crossed or not the threshold level
-- 
2.17.1

Re: [PATCH 05/11] thermal: max77620: Appease the kernel-doc deity

[Viresh Kumar]

On 06-11-19, 18:58, Amit Kucheria wrote:
> Fix up the following warning when compiled with make W=1:
> 
> linux.git/drivers/thermal/max77620_thermal.c:48: warning: Function
> parameter or member 'temp' not described in 'max77620_thermal_read_temp'
> 
> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
> ---
>  drivers/thermal/max77620_thermal.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/thermal/max77620_thermal.c b/drivers/thermal/max77620_thermal.c
> index 88fd0fbe0cfac..82d06c7411eb3 100644
> --- a/drivers/thermal/max77620_thermal.c
> +++ b/drivers/thermal/max77620_thermal.c
> @@ -33,7 +33,7 @@ struct max77620_therm_info {
>  /**
>   * max77620_thermal_read_temp: Read PMIC die temperatue.
>   * @data:	Device specific data.
> - * temp:	Temperature in millidegrees Celsius
> + * @temp:	Temperature in millidegrees Celsius
>   *
>   * The actual temperature of PMIC die is not available from PMIC.
>   * PMIC only tells the status if it has crossed or not the threshold level

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>

-- 
viresh

[PATCH 06/11] thermal: mediatek: Appease the kernel-doc deity

[Amit Kucheria]

Replace a comment starting with /** by simply /* to avoid having it
interpreted as a kernel-doc comment. Describe missing function
parameters where needed.

Fixes up the following warnings when compiled with make W=1:

linux.git/drivers/thermal/mtk_thermal.c:374: warning: cannot understand
function prototype: 'const struct mtk_thermal_data mt8173_thermal_data =
'
linux.git/drivers/thermal/mtk_thermal.c:413: warning: cannot understand
function prototype: 'const struct mtk_thermal_data mt2701_thermal_data =
'
linux.git/drivers/thermal/mtk_thermal.c:443: warning: cannot understand
function prototype: 'const struct mtk_thermal_data mt2712_thermal_data =
'
linux.git/drivers/thermal/mtk_thermal.c:499: warning: cannot understand
function prototype: 'const struct mtk_thermal_data mt8183_thermal_data =
'
linux.git/drivers/thermal/mtk_thermal.c:529: warning: Function parameter
or member 'sensno' not described in 'raw_to_mcelsius'

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
---
 drivers/thermal/mtk_thermal.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c
index acf4854cbb8b8..76e30603d4d58 100644
--- a/drivers/thermal/mtk_thermal.c
+++ b/drivers/thermal/mtk_thermal.c
@@ -358,7 +358,7 @@ static const int mt7622_mux_values[MT7622_NUM_SENSORS] = { 0, };
 static const int mt7622_vts_index[MT7622_NUM_SENSORS] = { VTS1 };
 static const int mt7622_tc_offset[MT7622_NUM_CONTROLLER] = { 0x0, };
 
-/**
+/*
  * The MT8173 thermal controller has four banks. Each bank can read up to
  * four temperature sensors simultaneously. The MT8173 has a total of 5
  * temperature sensors. We use each bank to measure a certain area of the
@@ -400,7 +400,7 @@ static const struct mtk_thermal_data mt8173_thermal_data = {
 	.sensor_mux_values = mt8173_mux_values,
 };
 
-/**
+/*
  * The MT2701 thermal controller has one bank, which can read up to
  * three temperature sensors simultaneously. The MT2701 has a total of 3
  * temperature sensors.
@@ -430,7 +430,7 @@ static const struct mtk_thermal_data mt2701_thermal_data = {
 	.sensor_mux_values = mt2701_mux_values,
 };
 
-/**
+/*
  * The MT2712 thermal controller has one bank, which can read up to
  * four temperature sensors simultaneously. The MT2712 has a total of 4
  * temperature sensors.
@@ -484,7 +484,7 @@ static const struct mtk_thermal_data mt7622_thermal_data = {
 	.sensor_mux_values = mt7622_mux_values,
 };
 
-/**
+/*
  * The MT8183 thermal controller has one bank for the current SW framework.
  * The MT8183 has a total of 6 temperature sensors.
  * There are two thermal controller to control the six sensor.
@@ -495,7 +495,6 @@ static const struct mtk_thermal_data mt7622_thermal_data = {
  * data, and this indeed needs the temperatures of the individual banks
  * for making better decisions.
  */
-
 static const struct mtk_thermal_data mt8183_thermal_data = {
 	.auxadc_channel = MT8183_TEMP_AUXADC_CHANNEL,
 	.num_banks = MT8183_NUM_SENSORS_PER_ZONE,
@@ -519,7 +518,8 @@ static const struct mtk_thermal_data mt8183_thermal_data = {
 
 /**
  * raw_to_mcelsius - convert a raw ADC value to mcelsius
- * @mt:		The thermal controller
+ * @mt:	The thermal controller
+ * @sensno:	sensor number
  * @raw:	raw ADC value
  *
  * This converts the raw ADC value to mcelsius using the SoC specific
-- 
2.17.1

[PATCH 06/11] thermal: mediatek: Appease the kernel-doc deity

[Amit Kucheria]

Replace a comment starting with /** by simply /* to avoid having it
interpreted as a kernel-doc comment. Describe missing function
parameters where needed.

Fixes up the following warnings when compiled with make W=1:

linux.git/drivers/thermal/mtk_thermal.c:374: warning: cannot understand
function prototype: 'const struct mtk_thermal_data mt8173_thermal_data =
'
linux.git/drivers/thermal/mtk_thermal.c:413: warning: cannot understand
function prototype: 'const struct mtk_thermal_data mt2701_thermal_data =
'
linux.git/drivers/thermal/mtk_thermal.c:443: warning: cannot understand
function prototype: 'const struct mtk_thermal_data mt2712_thermal_data =
'
linux.git/drivers/thermal/mtk_thermal.c:499: warning: cannot understand
function prototype: 'const struct mtk_thermal_data mt8183_thermal_data =
'
linux.git/drivers/thermal/mtk_thermal.c:529: warning: Function parameter
or member 'sensno' not described in 'raw_to_mcelsius'

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
---
 drivers/thermal/mtk_thermal.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c
index acf4854cbb8b8..76e30603d4d58 100644
--- a/drivers/thermal/mtk_thermal.c
+++ b/drivers/thermal/mtk_thermal.c
@@ -358,7 +358,7 @@ static const int mt7622_mux_values[MT7622_NUM_SENSORS] = { 0, };
 static const int mt7622_vts_index[MT7622_NUM_SENSORS] = { VTS1 };
 static const int mt7622_tc_offset[MT7622_NUM_CONTROLLER] = { 0x0, };
 
-/**
+/*
  * The MT8173 thermal controller has four banks. Each bank can read up to
  * four temperature sensors simultaneously. The MT8173 has a total of 5
  * temperature sensors. We use each bank to measure a certain area of the
@@ -400,7 +400,7 @@ static const struct mtk_thermal_data mt8173_thermal_data = {
 	.sensor_mux_values = mt8173_mux_values,
 };
 
-/**
+/*
  * The MT2701 thermal controller has one bank, which can read up to
  * three temperature sensors simultaneously. The MT2701 has a total of 3
  * temperature sensors.
@@ -430,7 +430,7 @@ static const struct mtk_thermal_data mt2701_thermal_data = {
 	.sensor_mux_values = mt2701_mux_values,
 };
 
-/**
+/*
  * The MT2712 thermal controller has one bank, which can read up to
  * four temperature sensors simultaneously. The MT2712 has a total of 4
  * temperature sensors.
@@ -484,7 +484,7 @@ static const struct mtk_thermal_data mt7622_thermal_data = {
 	.sensor_mux_values = mt7622_mux_values,
 };
 
-/**
+/*
  * The MT8183 thermal controller has one bank for the current SW framework.
  * The MT8183 has a total of 6 temperature sensors.
  * There are two thermal controller to control the six sensor.
@@ -495,7 +495,6 @@ static const struct mtk_thermal_data mt7622_thermal_data = {
  * data, and this indeed needs the temperatures of the individual banks
  * for making better decisions.
  */
-
 static const struct mtk_thermal_data mt8183_thermal_data = {
 	.auxadc_channel = MT8183_TEMP_AUXADC_CHANNEL,
 	.num_banks = MT8183_NUM_SENSORS_PER_ZONE,
@@ -519,7 +518,8 @@ static const struct mtk_thermal_data mt8183_thermal_data = {
 
 /**
  * raw_to_mcelsius - convert a raw ADC value to mcelsius
- * @mt:		The thermal controller
+ * @mt:	The thermal controller
+ * @sensno:	sensor number
  * @raw:	raw ADC value
  *
  * This converts the raw ADC value to mcelsius using the SoC specific
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 06/11] thermal: mediatek: Appease the kernel-doc deity

[Amit Kucheria]

Replace a comment starting with /** by simply /* to avoid having it
interpreted as a kernel-doc comment. Describe missing function
parameters where needed.

Fixes up the following warnings when compiled with make W=1:

linux.git/drivers/thermal/mtk_thermal.c:374: warning: cannot understand
function prototype: 'const struct mtk_thermal_data mt8173_thermal_data =
'
linux.git/drivers/thermal/mtk_thermal.c:413: warning: cannot understand
function prototype: 'const struct mtk_thermal_data mt2701_thermal_data =
'
linux.git/drivers/thermal/mtk_thermal.c:443: warning: cannot understand
function prototype: 'const struct mtk_thermal_data mt2712_thermal_data =
'
linux.git/drivers/thermal/mtk_thermal.c:499: warning: cannot understand
function prototype: 'const struct mtk_thermal_data mt8183_thermal_data =
'
linux.git/drivers/thermal/mtk_thermal.c:529: warning: Function parameter
or member 'sensno' not described in 'raw_to_mcelsius'

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
---
 drivers/thermal/mtk_thermal.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c
index acf4854cbb8b8..76e30603d4d58 100644
--- a/drivers/thermal/mtk_thermal.c
+++ b/drivers/thermal/mtk_thermal.c
@@ -358,7 +358,7 @@ static const int mt7622_mux_values[MT7622_NUM_SENSORS] = { 0, };
 static const int mt7622_vts_index[MT7622_NUM_SENSORS] = { VTS1 };
 static const int mt7622_tc_offset[MT7622_NUM_CONTROLLER] = { 0x0, };
 
-/**
+/*
  * The MT8173 thermal controller has four banks. Each bank can read up to
  * four temperature sensors simultaneously. The MT8173 has a total of 5
  * temperature sensors. We use each bank to measure a certain area of the
@@ -400,7 +400,7 @@ static const struct mtk_thermal_data mt8173_thermal_data = {
 	.sensor_mux_values = mt8173_mux_values,
 };
 
-/**
+/*
  * The MT2701 thermal controller has one bank, which can read up to
  * three temperature sensors simultaneously. The MT2701 has a total of 3
  * temperature sensors.
@@ -430,7 +430,7 @@ static const struct mtk_thermal_data mt2701_thermal_data = {
 	.sensor_mux_values = mt2701_mux_values,
 };
 
-/**
+/*
  * The MT2712 thermal controller has one bank, which can read up to
  * four temperature sensors simultaneously. The MT2712 has a total of 4
  * temperature sensors.
@@ -484,7 +484,7 @@ static const struct mtk_thermal_data mt7622_thermal_data = {
 	.sensor_mux_values = mt7622_mux_values,
 };
 
-/**
+/*
  * The MT8183 thermal controller has one bank for the current SW framework.
  * The MT8183 has a total of 6 temperature sensors.
  * There are two thermal controller to control the six sensor.
@@ -495,7 +495,6 @@ static const struct mtk_thermal_data mt7622_thermal_data = {
  * data, and this indeed needs the temperatures of the individual banks
  * for making better decisions.
  */
-
 static const struct mtk_thermal_data mt8183_thermal_data = {
 	.auxadc_channel = MT8183_TEMP_AUXADC_CHANNEL,
 	.num_banks = MT8183_NUM_SENSORS_PER_ZONE,
@@ -519,7 +518,8 @@ static const struct mtk_thermal_data mt8183_thermal_data = {
 
 /**
  * raw_to_mcelsius - convert a raw ADC value to mcelsius
- * @mt:		The thermal controller
+ * @mt:	The thermal controller
+ * @sensno:	sensor number
  * @raw:	raw ADC value
  *
  * This converts the raw ADC value to mcelsius using the SoC specific
-- 
2.17.1


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH 06/11] thermal: mediatek: Appease the kernel-doc deity

[Viresh Kumar]

On 06-11-19, 18:58, Amit Kucheria wrote:
> Replace a comment starting with /** by simply /* to avoid having it
> interpreted as a kernel-doc comment. Describe missing function
> parameters where needed.
> 
> Fixes up the following warnings when compiled with make W=1:
> 
> linux.git/drivers/thermal/mtk_thermal.c:374: warning: cannot understand
> function prototype: 'const struct mtk_thermal_data mt8173_thermal_data =
> '
> linux.git/drivers/thermal/mtk_thermal.c:413: warning: cannot understand
> function prototype: 'const struct mtk_thermal_data mt2701_thermal_data =
> '
> linux.git/drivers/thermal/mtk_thermal.c:443: warning: cannot understand
> function prototype: 'const struct mtk_thermal_data mt2712_thermal_data =
> '
> linux.git/drivers/thermal/mtk_thermal.c:499: warning: cannot understand
> function prototype: 'const struct mtk_thermal_data mt8183_thermal_data =
> '
> linux.git/drivers/thermal/mtk_thermal.c:529: warning: Function parameter
> or member 'sensno' not described in 'raw_to_mcelsius'
> 
> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
> ---
>  drivers/thermal/mtk_thermal.c | 12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c
> index acf4854cbb8b8..76e30603d4d58 100644
> --- a/drivers/thermal/mtk_thermal.c
> +++ b/drivers/thermal/mtk_thermal.c
> @@ -358,7 +358,7 @@ static const int mt7622_mux_values[MT7622_NUM_SENSORS] = { 0, };
>  static const int mt7622_vts_index[MT7622_NUM_SENSORS] = { VTS1 };
>  static const int mt7622_tc_offset[MT7622_NUM_CONTROLLER] = { 0x0, };
>  
> -/**
> +/*
>   * The MT8173 thermal controller has four banks. Each bank can read up to
>   * four temperature sensors simultaneously. The MT8173 has a total of 5
>   * temperature sensors. We use each bank to measure a certain area of the
> @@ -400,7 +400,7 @@ static const struct mtk_thermal_data mt8173_thermal_data = {
>  	.sensor_mux_values = mt8173_mux_values,
>  };
>  
> -/**
> +/*
>   * The MT2701 thermal controller has one bank, which can read up to
>   * three temperature sensors simultaneously. The MT2701 has a total of 3
>   * temperature sensors.
> @@ -430,7 +430,7 @@ static const struct mtk_thermal_data mt2701_thermal_data = {
>  	.sensor_mux_values = mt2701_mux_values,
>  };
>  
> -/**
> +/*
>   * The MT2712 thermal controller has one bank, which can read up to
>   * four temperature sensors simultaneously. The MT2712 has a total of 4
>   * temperature sensors.
> @@ -484,7 +484,7 @@ static const struct mtk_thermal_data mt7622_thermal_data = {
>  	.sensor_mux_values = mt7622_mux_values,
>  };
>  
> -/**
> +/*
>   * The MT8183 thermal controller has one bank for the current SW framework.
>   * The MT8183 has a total of 6 temperature sensors.
>   * There are two thermal controller to control the six sensor.
> @@ -495,7 +495,6 @@ static const struct mtk_thermal_data mt7622_thermal_data = {
>   * data, and this indeed needs the temperatures of the individual banks
>   * for making better decisions.
>   */
> -
>  static const struct mtk_thermal_data mt8183_thermal_data = {
>  	.auxadc_channel = MT8183_TEMP_AUXADC_CHANNEL,
>  	.num_banks = MT8183_NUM_SENSORS_PER_ZONE,
> @@ -519,7 +518,8 @@ static const struct mtk_thermal_data mt8183_thermal_data = {
>  
>  /**
>   * raw_to_mcelsius - convert a raw ADC value to mcelsius
> - * @mt:		The thermal controller
> + * @mt:	The thermal controller
> + * @sensno:	sensor number
>   * @raw:	raw ADC value

This doesn't look related to $subject

>   *
>   * This converts the raw ADC value to mcelsius using the SoC specific
> -- 
> 2.17.1

-- 
viresh

Re: [PATCH 06/11] thermal: mediatek: Appease the kernel-doc deity

[Viresh Kumar]

On 06-11-19, 18:58, Amit Kucheria wrote:
> Replace a comment starting with /** by simply /* to avoid having it
> interpreted as a kernel-doc comment. Describe missing function
> parameters where needed.
> 
> Fixes up the following warnings when compiled with make W=1:
> 
> linux.git/drivers/thermal/mtk_thermal.c:374: warning: cannot understand
> function prototype: 'const struct mtk_thermal_data mt8173_thermal_data =
> '
> linux.git/drivers/thermal/mtk_thermal.c:413: warning: cannot understand
> function prototype: 'const struct mtk_thermal_data mt2701_thermal_data =
> '
> linux.git/drivers/thermal/mtk_thermal.c:443: warning: cannot understand
> function prototype: 'const struct mtk_thermal_data mt2712_thermal_data =
> '
> linux.git/drivers/thermal/mtk_thermal.c:499: warning: cannot understand
> function prototype: 'const struct mtk_thermal_data mt8183_thermal_data =
> '
> linux.git/drivers/thermal/mtk_thermal.c:529: warning: Function parameter
> or member 'sensno' not described in 'raw_to_mcelsius'
> 
> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
> ---
>  drivers/thermal/mtk_thermal.c | 12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c
> index acf4854cbb8b8..76e30603d4d58 100644
> --- a/drivers/thermal/mtk_thermal.c
> +++ b/drivers/thermal/mtk_thermal.c
> @@ -358,7 +358,7 @@ static const int mt7622_mux_values[MT7622_NUM_SENSORS] = { 0, };
>  static const int mt7622_vts_index[MT7622_NUM_SENSORS] = { VTS1 };
>  static const int mt7622_tc_offset[MT7622_NUM_CONTROLLER] = { 0x0, };
>  
> -/**
> +/*
>   * The MT8173 thermal controller has four banks. Each bank can read up to
>   * four temperature sensors simultaneously. The MT8173 has a total of 5
>   * temperature sensors. We use each bank to measure a certain area of the
> @@ -400,7 +400,7 @@ static const struct mtk_thermal_data mt8173_thermal_data = {
>  	.sensor_mux_values = mt8173_mux_values,
>  };
>  
> -/**
> +/*
>   * The MT2701 thermal controller has one bank, which can read up to
>   * three temperature sensors simultaneously. The MT2701 has a total of 3
>   * temperature sensors.
> @@ -430,7 +430,7 @@ static const struct mtk_thermal_data mt2701_thermal_data = {
>  	.sensor_mux_values = mt2701_mux_values,
>  };
>  
> -/**
> +/*
>   * The MT2712 thermal controller has one bank, which can read up to
>   * four temperature sensors simultaneously. The MT2712 has a total of 4
>   * temperature sensors.
> @@ -484,7 +484,7 @@ static const struct mtk_thermal_data mt7622_thermal_data = {
>  	.sensor_mux_values = mt7622_mux_values,
>  };
>  
> -/**
> +/*
>   * The MT8183 thermal controller has one bank for the current SW framework.
>   * The MT8183 has a total of 6 temperature sensors.
>   * There are two thermal controller to control the six sensor.
> @@ -495,7 +495,6 @@ static const struct mtk_thermal_data mt7622_thermal_data = {
>   * data, and this indeed needs the temperatures of the individual banks
>   * for making better decisions.
>   */
> -
>  static const struct mtk_thermal_data mt8183_thermal_data = {
>  	.auxadc_channel = MT8183_TEMP_AUXADC_CHANNEL,
>  	.num_banks = MT8183_NUM_SENSORS_PER_ZONE,
> @@ -519,7 +518,8 @@ static const struct mtk_thermal_data mt8183_thermal_data = {
>  
>  /**
>   * raw_to_mcelsius - convert a raw ADC value to mcelsius
> - * @mt:		The thermal controller
> + * @mt:	The thermal controller
> + * @sensno:	sensor number
>   * @raw:	raw ADC value

This doesn't look related to $subject

>   *
>   * This converts the raw ADC value to mcelsius using the SoC specific
> -- 
> 2.17.1

-- 
viresh

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 06/11] thermal: mediatek: Appease the kernel-doc deity

[Viresh Kumar]

On 06-11-19, 18:58, Amit Kucheria wrote:
> Replace a comment starting with /** by simply /* to avoid having it
> interpreted as a kernel-doc comment. Describe missing function
> parameters where needed.
> 
> Fixes up the following warnings when compiled with make W=1:
> 
> linux.git/drivers/thermal/mtk_thermal.c:374: warning: cannot understand
> function prototype: 'const struct mtk_thermal_data mt8173_thermal_data =
> '
> linux.git/drivers/thermal/mtk_thermal.c:413: warning: cannot understand
> function prototype: 'const struct mtk_thermal_data mt2701_thermal_data =
> '
> linux.git/drivers/thermal/mtk_thermal.c:443: warning: cannot understand
> function prototype: 'const struct mtk_thermal_data mt2712_thermal_data =
> '
> linux.git/drivers/thermal/mtk_thermal.c:499: warning: cannot understand
> function prototype: 'const struct mtk_thermal_data mt8183_thermal_data =
> '
> linux.git/drivers/thermal/mtk_thermal.c:529: warning: Function parameter
> or member 'sensno' not described in 'raw_to_mcelsius'
> 
> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
> ---
>  drivers/thermal/mtk_thermal.c | 12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c
> index acf4854cbb8b8..76e30603d4d58 100644
> --- a/drivers/thermal/mtk_thermal.c
> +++ b/drivers/thermal/mtk_thermal.c
> @@ -358,7 +358,7 @@ static const int mt7622_mux_values[MT7622_NUM_SENSORS] = { 0, };
>  static const int mt7622_vts_index[MT7622_NUM_SENSORS] = { VTS1 };
>  static const int mt7622_tc_offset[MT7622_NUM_CONTROLLER] = { 0x0, };
>  
> -/**
> +/*
>   * The MT8173 thermal controller has four banks. Each bank can read up to
>   * four temperature sensors simultaneously. The MT8173 has a total of 5
>   * temperature sensors. We use each bank to measure a certain area of the
> @@ -400,7 +400,7 @@ static const struct mtk_thermal_data mt8173_thermal_data = {
>  	.sensor_mux_values = mt8173_mux_values,
>  };
>  
> -/**
> +/*
>   * The MT2701 thermal controller has one bank, which can read up to
>   * three temperature sensors simultaneously. The MT2701 has a total of 3
>   * temperature sensors.
> @@ -430,7 +430,7 @@ static const struct mtk_thermal_data mt2701_thermal_data = {
>  	.sensor_mux_values = mt2701_mux_values,
>  };
>  
> -/**
> +/*
>   * The MT2712 thermal controller has one bank, which can read up to
>   * four temperature sensors simultaneously. The MT2712 has a total of 4
>   * temperature sensors.
> @@ -484,7 +484,7 @@ static const struct mtk_thermal_data mt7622_thermal_data = {
>  	.sensor_mux_values = mt7622_mux_values,
>  };
>  
> -/**
> +/*
>   * The MT8183 thermal controller has one bank for the current SW framework.
>   * The MT8183 has a total of 6 temperature sensors.
>   * There are two thermal controller to control the six sensor.
> @@ -495,7 +495,6 @@ static const struct mtk_thermal_data mt7622_thermal_data = {
>   * data, and this indeed needs the temperatures of the individual banks
>   * for making better decisions.
>   */
> -
>  static const struct mtk_thermal_data mt8183_thermal_data = {
>  	.auxadc_channel = MT8183_TEMP_AUXADC_CHANNEL,
>  	.num_banks = MT8183_NUM_SENSORS_PER_ZONE,
> @@ -519,7 +518,8 @@ static const struct mtk_thermal_data mt8183_thermal_data = {
>  
>  /**
>   * raw_to_mcelsius - convert a raw ADC value to mcelsius
> - * @mt:		The thermal controller
> + * @mt:	The thermal controller
> + * @sensno:	sensor number
>   * @raw:	raw ADC value

This doesn't look related to $subject

>   *
>   * This converts the raw ADC value to mcelsius using the SoC specific
> -- 
> 2.17.1

-- 
viresh

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH 06/11] thermal: mediatek: Appease the kernel-doc deity

[Viresh Kumar]

On 07-11-19, 07:49, Viresh Kumar wrote:
> On 06-11-19, 18:58, Amit Kucheria wrote:
> > Replace a comment starting with /** by simply /* to avoid having it
> > interpreted as a kernel-doc comment. Describe missing function
> > parameters where needed.
> > 
> > Fixes up the following warnings when compiled with make W=1:
> > 
> > linux.git/drivers/thermal/mtk_thermal.c:374: warning: cannot understand
> > function prototype: 'const struct mtk_thermal_data mt8173_thermal_data =
> > '
> > linux.git/drivers/thermal/mtk_thermal.c:413: warning: cannot understand
> > function prototype: 'const struct mtk_thermal_data mt2701_thermal_data =
> > '
> > linux.git/drivers/thermal/mtk_thermal.c:443: warning: cannot understand
> > function prototype: 'const struct mtk_thermal_data mt2712_thermal_data =
> > '
> > linux.git/drivers/thermal/mtk_thermal.c:499: warning: cannot understand
> > function prototype: 'const struct mtk_thermal_data mt8183_thermal_data =
> > '
> > linux.git/drivers/thermal/mtk_thermal.c:529: warning: Function parameter
> > or member 'sensno' not described in 'raw_to_mcelsius'
> > 
> > Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
> > ---
> >  drivers/thermal/mtk_thermal.c | 12 ++++++------
> >  1 file changed, 6 insertions(+), 6 deletions(-)
> > 
> > diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c
> > index acf4854cbb8b8..76e30603d4d58 100644
> > --- a/drivers/thermal/mtk_thermal.c
> > +++ b/drivers/thermal/mtk_thermal.c
> > @@ -358,7 +358,7 @@ static const int mt7622_mux_values[MT7622_NUM_SENSORS] = { 0, };
> >  static const int mt7622_vts_index[MT7622_NUM_SENSORS] = { VTS1 };
> >  static const int mt7622_tc_offset[MT7622_NUM_CONTROLLER] = { 0x0, };
> >  
> > -/**
> > +/*
> >   * The MT8173 thermal controller has four banks. Each bank can read up to
> >   * four temperature sensors simultaneously. The MT8173 has a total of 5
> >   * temperature sensors. We use each bank to measure a certain area of the
> > @@ -400,7 +400,7 @@ static const struct mtk_thermal_data mt8173_thermal_data = {
> >  	.sensor_mux_values = mt8173_mux_values,
> >  };
> >  
> > -/**
> > +/*
> >   * The MT2701 thermal controller has one bank, which can read up to
> >   * three temperature sensors simultaneously. The MT2701 has a total of 3
> >   * temperature sensors.
> > @@ -430,7 +430,7 @@ static const struct mtk_thermal_data mt2701_thermal_data = {
> >  	.sensor_mux_values = mt2701_mux_values,
> >  };
> >  
> > -/**
> > +/*
> >   * The MT2712 thermal controller has one bank, which can read up to
> >   * four temperature sensors simultaneously. The MT2712 has a total of 4
> >   * temperature sensors.
> > @@ -484,7 +484,7 @@ static const struct mtk_thermal_data mt7622_thermal_data = {
> >  	.sensor_mux_values = mt7622_mux_values,
> >  };
> >  
> > -/**
> > +/*
> >   * The MT8183 thermal controller has one bank for the current SW framework.
> >   * The MT8183 has a total of 6 temperature sensors.
> >   * There are two thermal controller to control the six sensor.
> > @@ -495,7 +495,6 @@ static const struct mtk_thermal_data mt7622_thermal_data = {
> >   * data, and this indeed needs the temperatures of the individual banks
> >   * for making better decisions.
> >   */
> > -
> >  static const struct mtk_thermal_data mt8183_thermal_data = {
> >  	.auxadc_channel = MT8183_TEMP_AUXADC_CHANNEL,
> >  	.num_banks = MT8183_NUM_SENSORS_PER_ZONE,
> > @@ -519,7 +518,8 @@ static const struct mtk_thermal_data mt8183_thermal_data = {
> >  
> >  /**
> >   * raw_to_mcelsius - convert a raw ADC value to mcelsius
> > - * @mt:		The thermal controller
> > + * @mt:	The thermal controller
> > + * @sensno:	sensor number
> >   * @raw:	raw ADC value
> 
> This doesn't look related to $subject

I take this statement back :)

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>

-- 
viresh

Re: [PATCH 06/11] thermal: mediatek: Appease the kernel-doc deity

[Viresh Kumar]

On 07-11-19, 07:49, Viresh Kumar wrote:
> On 06-11-19, 18:58, Amit Kucheria wrote:
> > Replace a comment starting with /** by simply /* to avoid having it
> > interpreted as a kernel-doc comment. Describe missing function
> > parameters where needed.
> > 
> > Fixes up the following warnings when compiled with make W=1:
> > 
> > linux.git/drivers/thermal/mtk_thermal.c:374: warning: cannot understand
> > function prototype: 'const struct mtk_thermal_data mt8173_thermal_data =
> > '
> > linux.git/drivers/thermal/mtk_thermal.c:413: warning: cannot understand
> > function prototype: 'const struct mtk_thermal_data mt2701_thermal_data =
> > '
> > linux.git/drivers/thermal/mtk_thermal.c:443: warning: cannot understand
> > function prototype: 'const struct mtk_thermal_data mt2712_thermal_data =
> > '
> > linux.git/drivers/thermal/mtk_thermal.c:499: warning: cannot understand
> > function prototype: 'const struct mtk_thermal_data mt8183_thermal_data =
> > '
> > linux.git/drivers/thermal/mtk_thermal.c:529: warning: Function parameter
> > or member 'sensno' not described in 'raw_to_mcelsius'
> > 
> > Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
> > ---
> >  drivers/thermal/mtk_thermal.c | 12 ++++++------
> >  1 file changed, 6 insertions(+), 6 deletions(-)
> > 
> > diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c
> > index acf4854cbb8b8..76e30603d4d58 100644
> > --- a/drivers/thermal/mtk_thermal.c
> > +++ b/drivers/thermal/mtk_thermal.c
> > @@ -358,7 +358,7 @@ static const int mt7622_mux_values[MT7622_NUM_SENSORS] = { 0, };
> >  static const int mt7622_vts_index[MT7622_NUM_SENSORS] = { VTS1 };
> >  static const int mt7622_tc_offset[MT7622_NUM_CONTROLLER] = { 0x0, };
> >  
> > -/**
> > +/*
> >   * The MT8173 thermal controller has four banks. Each bank can read up to
> >   * four temperature sensors simultaneously. The MT8173 has a total of 5
> >   * temperature sensors. We use each bank to measure a certain area of the
> > @@ -400,7 +400,7 @@ static const struct mtk_thermal_data mt8173_thermal_data = {
> >  	.sensor_mux_values = mt8173_mux_values,
> >  };
> >  
> > -/**
> > +/*
> >   * The MT2701 thermal controller has one bank, which can read up to
> >   * three temperature sensors simultaneously. The MT2701 has a total of 3
> >   * temperature sensors.
> > @@ -430,7 +430,7 @@ static const struct mtk_thermal_data mt2701_thermal_data = {
> >  	.sensor_mux_values = mt2701_mux_values,
> >  };
> >  
> > -/**
> > +/*
> >   * The MT2712 thermal controller has one bank, which can read up to
> >   * four temperature sensors simultaneously. The MT2712 has a total of 4
> >   * temperature sensors.
> > @@ -484,7 +484,7 @@ static const struct mtk_thermal_data mt7622_thermal_data = {
> >  	.sensor_mux_values = mt7622_mux_values,
> >  };
> >  
> > -/**
> > +/*
> >   * The MT8183 thermal controller has one bank for the current SW framework.
> >   * The MT8183 has a total of 6 temperature sensors.
> >   * There are two thermal controller to control the six sensor.
> > @@ -495,7 +495,6 @@ static const struct mtk_thermal_data mt7622_thermal_data = {
> >   * data, and this indeed needs the temperatures of the individual banks
> >   * for making better decisions.
> >   */
> > -
> >  static const struct mtk_thermal_data mt8183_thermal_data = {
> >  	.auxadc_channel = MT8183_TEMP_AUXADC_CHANNEL,
> >  	.num_banks = MT8183_NUM_SENSORS_PER_ZONE,
> > @@ -519,7 +518,8 @@ static const struct mtk_thermal_data mt8183_thermal_data = {
> >  
> >  /**
> >   * raw_to_mcelsius - convert a raw ADC value to mcelsius
> > - * @mt:		The thermal controller
> > + * @mt:	The thermal controller
> > + * @sensno:	sensor number
> >   * @raw:	raw ADC value
> 
> This doesn't look related to $subject

I take this statement back :)

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>

-- 
viresh

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 06/11] thermal: mediatek: Appease the kernel-doc deity

[Viresh Kumar]

On 07-11-19, 07:49, Viresh Kumar wrote:
> On 06-11-19, 18:58, Amit Kucheria wrote:
> > Replace a comment starting with /** by simply /* to avoid having it
> > interpreted as a kernel-doc comment. Describe missing function
> > parameters where needed.
> > 
> > Fixes up the following warnings when compiled with make W=1:
> > 
> > linux.git/drivers/thermal/mtk_thermal.c:374: warning: cannot understand
> > function prototype: 'const struct mtk_thermal_data mt8173_thermal_data =
> > '
> > linux.git/drivers/thermal/mtk_thermal.c:413: warning: cannot understand
> > function prototype: 'const struct mtk_thermal_data mt2701_thermal_data =
> > '
> > linux.git/drivers/thermal/mtk_thermal.c:443: warning: cannot understand
> > function prototype: 'const struct mtk_thermal_data mt2712_thermal_data =
> > '
> > linux.git/drivers/thermal/mtk_thermal.c:499: warning: cannot understand
> > function prototype: 'const struct mtk_thermal_data mt8183_thermal_data =
> > '
> > linux.git/drivers/thermal/mtk_thermal.c:529: warning: Function parameter
> > or member 'sensno' not described in 'raw_to_mcelsius'
> > 
> > Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
> > ---
> >  drivers/thermal/mtk_thermal.c | 12 ++++++------
> >  1 file changed, 6 insertions(+), 6 deletions(-)
> > 
> > diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c
> > index acf4854cbb8b8..76e30603d4d58 100644
> > --- a/drivers/thermal/mtk_thermal.c
> > +++ b/drivers/thermal/mtk_thermal.c
> > @@ -358,7 +358,7 @@ static const int mt7622_mux_values[MT7622_NUM_SENSORS] = { 0, };
> >  static const int mt7622_vts_index[MT7622_NUM_SENSORS] = { VTS1 };
> >  static const int mt7622_tc_offset[MT7622_NUM_CONTROLLER] = { 0x0, };
> >  
> > -/**
> > +/*
> >   * The MT8173 thermal controller has four banks. Each bank can read up to
> >   * four temperature sensors simultaneously. The MT8173 has a total of 5
> >   * temperature sensors. We use each bank to measure a certain area of the
> > @@ -400,7 +400,7 @@ static const struct mtk_thermal_data mt8173_thermal_data = {
> >  	.sensor_mux_values = mt8173_mux_values,
> >  };
> >  
> > -/**
> > +/*
> >   * The MT2701 thermal controller has one bank, which can read up to
> >   * three temperature sensors simultaneously. The MT2701 has a total of 3
> >   * temperature sensors.
> > @@ -430,7 +430,7 @@ static const struct mtk_thermal_data mt2701_thermal_data = {
> >  	.sensor_mux_values = mt2701_mux_values,
> >  };
> >  
> > -/**
> > +/*
> >   * The MT2712 thermal controller has one bank, which can read up to
> >   * four temperature sensors simultaneously. The MT2712 has a total of 4
> >   * temperature sensors.
> > @@ -484,7 +484,7 @@ static const struct mtk_thermal_data mt7622_thermal_data = {
> >  	.sensor_mux_values = mt7622_mux_values,
> >  };
> >  
> > -/**
> > +/*
> >   * The MT8183 thermal controller has one bank for the current SW framework.
> >   * The MT8183 has a total of 6 temperature sensors.
> >   * There are two thermal controller to control the six sensor.
> > @@ -495,7 +495,6 @@ static const struct mtk_thermal_data mt7622_thermal_data = {
> >   * data, and this indeed needs the temperatures of the individual banks
> >   * for making better decisions.
> >   */
> > -
> >  static const struct mtk_thermal_data mt8183_thermal_data = {
> >  	.auxadc_channel = MT8183_TEMP_AUXADC_CHANNEL,
> >  	.num_banks = MT8183_NUM_SENSORS_PER_ZONE,
> > @@ -519,7 +518,8 @@ static const struct mtk_thermal_data mt8183_thermal_data = {
> >  
> >  /**
> >   * raw_to_mcelsius - convert a raw ADC value to mcelsius
> > - * @mt:		The thermal controller
> > + * @mt:	The thermal controller
> > + * @sensno:	sensor number
> >   * @raw:	raw ADC value
> 
> This doesn't look related to $subject

I take this statement back :)

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>

-- 
viresh

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH 07/11] thermal: rockchip: Appease the kernel-doc deity

[Amit Kucheria]

Replace a comment starting with /** by simply /* to avoid having it
interpreted as a kernel-doc comment. Describe missing function
parameters where needed.

Fixes up the following warnings when compiled with make W=1:

linux.git/drivers/thermal/rockchip_thermal.c:27: warning: cannot
understand function prototype: 'enum tshut_mode '
linux.git/drivers/thermal/rockchip_thermal.c:37: warning: cannot
understand function prototype: 'enum tshut_polarity '
linux.git/drivers/thermal/rockchip_thermal.c:46: warning: cannot
understand function prototype: 'enum sensor_id '
linux.git/drivers/thermal/rockchip_thermal.c:56: warning: cannot
understand function prototype: 'enum adc_sort_mode '
linux.git/drivers/thermal/rockchip_thermal.c:123: warning: Function
parameter or member 'chn_id' not described in 'rockchip_tsadc_chip'
linux.git/drivers/thermal/rockchip_thermal.c:123: warning: Function
parameter or member 'control' not described in 'rockchip_tsadc_chip'
linux.git/drivers/thermal/rockchip_thermal.c:167: warning: Function
parameter or member 'sensors' not described in 'rockchip_thermal_data'
linux.git/drivers/thermal/rockchip_thermal.c:608: warning: Function
parameter or member 'grf' not described in 'rk_tsadcv2_initialize'
linux.git/drivers/thermal/rockchip_thermal.c:608: warning: Function
parameter or member 'regs' not described in 'rk_tsadcv2_initialize'
linux.git/drivers/thermal/rockchip_thermal.c:608: warning: Function
parameter or member 'tshut_polarity' not described in
'rk_tsadcv2_initialize'
linux.git/drivers/thermal/rockchip_thermal.c:644: warning: Function
parameter or member 'grf' not described in 'rk_tsadcv3_initialize'
linux.git/drivers/thermal/rockchip_thermal.c:644: warning: Function
parameter or member 'regs' not described in 'rk_tsadcv3_initialize'
linux.git/drivers/thermal/rockchip_thermal.c:644: warning: Function
parameter or member 'tshut_polarity' not described in
'rk_tsadcv3_initialize'
linux.git/drivers/thermal/rockchip_thermal.c:732: warning: Function
parameter or member 'regs' not described in 'rk_tsadcv3_control'
linux.git/drivers/thermal/rockchip_thermal.c:732: warning: Function
parameter or member 'enable' not described in 'rk_tsadcv3_control'
linux.git/drivers/thermal/rockchip_thermal.c:1211: warning: Function
parameter or member 'reset' not described in
'rockchip_thermal_reset_controller'

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
---
 drivers/thermal/rockchip_thermal.c | 22 ++++++++++++++++------
 1 file changed, 16 insertions(+), 6 deletions(-)

diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
index 343c2f5c5a259..9ed8085bb7924 100644
--- a/drivers/thermal/rockchip_thermal.c
+++ b/drivers/thermal/rockchip_thermal.c
@@ -19,7 +19,7 @@
 #include <linux/mfd/syscon.h>
 #include <linux/pinctrl/consumer.h>
 
-/**
+/*
  * If the temperature over a period of time High,
  * the resulting TSHUT gave CRU module,let it reset the entire chip,
  * or via GPIO give PMIC.
@@ -29,7 +29,7 @@ enum tshut_mode {
 	TSHUT_MODE_GPIO,
 };
 
-/**
+/*
  * The system Temperature Sensors tshut(tshut) polarity
  * the bit 8 is tshut polarity.
  * 0: low active, 1: high active
@@ -39,7 +39,7 @@ enum tshut_polarity {
 	TSHUT_HIGH_ACTIVE,
 };
 
-/**
+/*
  * The system has two Temperature Sensors.
  * sensor0 is for CPU, and sensor1 is for GPU.
  */
@@ -48,7 +48,7 @@ enum sensor_id {
 	SENSOR_GPU,
 };
 
-/**
+/*
  * The conversion table has the adc value and temperature.
  * ADC_DECREMENT: the adc value is of diminishing.(e.g. rk3288_code_table)
  * ADC_INCREMENT: the adc value is incremental.(e.g. rk3368_code_table)
@@ -80,13 +80,14 @@ struct chip_tsadc_table {
 
 /**
  * struct rockchip_tsadc_chip - hold the private data of tsadc chip
- * @chn_id[SOC_MAX_SENSORS]: the sensor id of chip correspond to the channel
+ * @chn_id: array of sensor ids of chip corresponding to the channel
  * @chn_num: the channel number of tsadc chip
  * @tshut_temp: the hardware-controlled shutdown temperature value
  * @tshut_mode: the hardware-controlled shutdown mode (0:CRU 1:GPIO)
  * @tshut_polarity: the hardware-controlled active polarity (0:LOW 1:HIGH)
  * @initialize: SoC special initialize tsadc controller method
  * @irq_ack: clear the interrupt
+ * @control: enable/disable method for the tsadc controller
  * @get_temp: get the temperature
  * @set_alarm_temp: set the high temperature interrupt
  * @set_tshut_temp: set the hardware-controlled shutdown temperature
@@ -139,7 +140,7 @@ struct rockchip_thermal_sensor {
  * @chip: pointer to the platform/configuration data
  * @pdev: platform device of thermal
  * @reset: the reset controller of tsadc
- * @sensors[SOC_MAX_SENSORS]: the thermal sensor
+ * @sensors: array of thermal sensors
  * @clk: the controller clock is divided by the exteral 24MHz
  * @pclk: the advanced peripherals bus clock
  * @grf: the general register file will be used to do static set by software
@@ -590,6 +591,9 @@ static int rk_tsadcv2_code_to_temp(const struct chip_tsadc_table *table,
 
 /**
  * rk_tsadcv2_initialize - initialize TASDC Controller.
+ * @grf: the general register file will be used to do static set by software
+ * @regs: the base address of tsadc controller
+ * @tshut_polarity: the hardware-controlled active polarity (0:LOW 1:HIGH)
  *
  * (1) Set TSADC_V2_AUTO_PERIOD:
  *     Configure the interleave between every two accessing of
@@ -624,6 +628,9 @@ static void rk_tsadcv2_initialize(struct regmap *grf, void __iomem *regs,
 
 /**
  * rk_tsadcv3_initialize - initialize TASDC Controller.
+ * @grf: the general register file will be used to do static set by software
+ * @regs: the base address of tsadc controller
+ * @tshut_polarity: the hardware-controlled active polarity (0:LOW 1:HIGH)
  *
  * (1) The tsadc control power sequence.
  *
@@ -723,6 +730,8 @@ static void rk_tsadcv2_control(void __iomem *regs, bool enable)
 
 /**
  * rk_tsadcv3_control - the tsadc controller is enabled or disabled.
+ * @regs: the base address of tsadc controller
+ * @enable: boolean flag to enable the controller
  *
  * NOTE: TSADC controller works at auto mode, and some SoCs need set the
  * tsadc_q_sel bit on TSADCV2_AUTO_CON[1]. The (1024 - tsadc_q) as output
@@ -1206,6 +1215,7 @@ rockchip_thermal_register_sensor(struct platform_device *pdev,
 
 /**
  * Reset TSADC Controller, reset all tsadc registers.
+ * @reset: the reset controller of tsadc
  */
 static void rockchip_thermal_reset_controller(struct reset_control *reset)
 {
-- 
2.17.1

[PATCH 07/11] thermal: rockchip: Appease the kernel-doc deity

[Amit Kucheria]

Replace a comment starting with /** by simply /* to avoid having it
interpreted as a kernel-doc comment. Describe missing function
parameters where needed.

Fixes up the following warnings when compiled with make W=1:

linux.git/drivers/thermal/rockchip_thermal.c:27: warning: cannot
understand function prototype: 'enum tshut_mode '
linux.git/drivers/thermal/rockchip_thermal.c:37: warning: cannot
understand function prototype: 'enum tshut_polarity '
linux.git/drivers/thermal/rockchip_thermal.c:46: warning: cannot
understand function prototype: 'enum sensor_id '
linux.git/drivers/thermal/rockchip_thermal.c:56: warning: cannot
understand function prototype: 'enum adc_sort_mode '
linux.git/drivers/thermal/rockchip_thermal.c:123: warning: Function
parameter or member 'chn_id' not described in 'rockchip_tsadc_chip'
linux.git/drivers/thermal/rockchip_thermal.c:123: warning: Function
parameter or member 'control' not described in 'rockchip_tsadc_chip'
linux.git/drivers/thermal/rockchip_thermal.c:167: warning: Function
parameter or member 'sensors' not described in 'rockchip_thermal_data'
linux.git/drivers/thermal/rockchip_thermal.c:608: warning: Function
parameter or member 'grf' not described in 'rk_tsadcv2_initialize'
linux.git/drivers/thermal/rockchip_thermal.c:608: warning: Function
parameter or member 'regs' not described in 'rk_tsadcv2_initialize'
linux.git/drivers/thermal/rockchip_thermal.c:608: warning: Function
parameter or member 'tshut_polarity' not described in
'rk_tsadcv2_initialize'
linux.git/drivers/thermal/rockchip_thermal.c:644: warning: Function
parameter or member 'grf' not described in 'rk_tsadcv3_initialize'
linux.git/drivers/thermal/rockchip_thermal.c:644: warning: Function
parameter or member 'regs' not described in 'rk_tsadcv3_initialize'
linux.git/drivers/thermal/rockchip_thermal.c:644: warning: Function
parameter or member 'tshut_polarity' not described in
'rk_tsadcv3_initialize'
linux.git/drivers/thermal/rockchip_thermal.c:732: warning: Function
parameter or member 'regs' not described in 'rk_tsadcv3_control'
linux.git/drivers/thermal/rockchip_thermal.c:732: warning: Function
parameter or member 'enable' not described in 'rk_tsadcv3_control'
linux.git/drivers/thermal/rockchip_thermal.c:1211: warning: Function
parameter or member 'reset' not described in
'rockchip_thermal_reset_controller'

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
---
 drivers/thermal/rockchip_thermal.c | 22 ++++++++++++++++------
 1 file changed, 16 insertions(+), 6 deletions(-)

diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
index 343c2f5c5a259..9ed8085bb7924 100644
--- a/drivers/thermal/rockchip_thermal.c
+++ b/drivers/thermal/rockchip_thermal.c
@@ -19,7 +19,7 @@
 #include <linux/mfd/syscon.h>
 #include <linux/pinctrl/consumer.h>
 
-/**
+/*
  * If the temperature over a period of time High,
  * the resulting TSHUT gave CRU module,let it reset the entire chip,
  * or via GPIO give PMIC.
@@ -29,7 +29,7 @@ enum tshut_mode {
 	TSHUT_MODE_GPIO,
 };
 
-/**
+/*
  * The system Temperature Sensors tshut(tshut) polarity
  * the bit 8 is tshut polarity.
  * 0: low active, 1: high active
@@ -39,7 +39,7 @@ enum tshut_polarity {
 	TSHUT_HIGH_ACTIVE,
 };
 
-/**
+/*
  * The system has two Temperature Sensors.
  * sensor0 is for CPU, and sensor1 is for GPU.
  */
@@ -48,7 +48,7 @@ enum sensor_id {
 	SENSOR_GPU,
 };
 
-/**
+/*
  * The conversion table has the adc value and temperature.
  * ADC_DECREMENT: the adc value is of diminishing.(e.g. rk3288_code_table)
  * ADC_INCREMENT: the adc value is incremental.(e.g. rk3368_code_table)
@@ -80,13 +80,14 @@ struct chip_tsadc_table {
 
 /**
  * struct rockchip_tsadc_chip - hold the private data of tsadc chip
- * @chn_id[SOC_MAX_SENSORS]: the sensor id of chip correspond to the channel
+ * @chn_id: array of sensor ids of chip corresponding to the channel
  * @chn_num: the channel number of tsadc chip
  * @tshut_temp: the hardware-controlled shutdown temperature value
  * @tshut_mode: the hardware-controlled shutdown mode (0:CRU 1:GPIO)
  * @tshut_polarity: the hardware-controlled active polarity (0:LOW 1:HIGH)
  * @initialize: SoC special initialize tsadc controller method
  * @irq_ack: clear the interrupt
+ * @control: enable/disable method for the tsadc controller
  * @get_temp: get the temperature
  * @set_alarm_temp: set the high temperature interrupt
  * @set_tshut_temp: set the hardware-controlled shutdown temperature
@@ -139,7 +140,7 @@ struct rockchip_thermal_sensor {
  * @chip: pointer to the platform/configuration data
  * @pdev: platform device of thermal
  * @reset: the reset controller of tsadc
- * @sensors[SOC_MAX_SENSORS]: the thermal sensor
+ * @sensors: array of thermal sensors
  * @clk: the controller clock is divided by the exteral 24MHz
  * @pclk: the advanced peripherals bus clock
  * @grf: the general register file will be used to do static set by software
@@ -590,6 +591,9 @@ static int rk_tsadcv2_code_to_temp(const struct chip_tsadc_table *table,
 
 /**
  * rk_tsadcv2_initialize - initialize TASDC Controller.
+ * @grf: the general register file will be used to do static set by software
+ * @regs: the base address of tsadc controller
+ * @tshut_polarity: the hardware-controlled active polarity (0:LOW 1:HIGH)
  *
  * (1) Set TSADC_V2_AUTO_PERIOD:
  *     Configure the interleave between every two accessing of
@@ -624,6 +628,9 @@ static void rk_tsadcv2_initialize(struct regmap *grf, void __iomem *regs,
 
 /**
  * rk_tsadcv3_initialize - initialize TASDC Controller.
+ * @grf: the general register file will be used to do static set by software
+ * @regs: the base address of tsadc controller
+ * @tshut_polarity: the hardware-controlled active polarity (0:LOW 1:HIGH)
  *
  * (1) The tsadc control power sequence.
  *
@@ -723,6 +730,8 @@ static void rk_tsadcv2_control(void __iomem *regs, bool enable)
 
 /**
  * rk_tsadcv3_control - the tsadc controller is enabled or disabled.
+ * @regs: the base address of tsadc controller
+ * @enable: boolean flag to enable the controller
  *
  * NOTE: TSADC controller works at auto mode, and some SoCs need set the
  * tsadc_q_sel bit on TSADCV2_AUTO_CON[1]. The (1024 - tsadc_q) as output
@@ -1206,6 +1215,7 @@ rockchip_thermal_register_sensor(struct platform_device *pdev,
 
 /**
  * Reset TSADC Controller, reset all tsadc registers.
+ * @reset: the reset controller of tsadc
  */
 static void rockchip_thermal_reset_controller(struct reset_control *reset)
 {
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 07/11] thermal: rockchip: Appease the kernel-doc deity

[Viresh Kumar]

On 06-11-19, 18:58, Amit Kucheria wrote:
> Replace a comment starting with /** by simply /* to avoid having it
> interpreted as a kernel-doc comment. Describe missing function
> parameters where needed.
> 
> Fixes up the following warnings when compiled with make W=1:
> 
> linux.git/drivers/thermal/rockchip_thermal.c:27: warning: cannot
> understand function prototype: 'enum tshut_mode '
> linux.git/drivers/thermal/rockchip_thermal.c:37: warning: cannot
> understand function prototype: 'enum tshut_polarity '
> linux.git/drivers/thermal/rockchip_thermal.c:46: warning: cannot
> understand function prototype: 'enum sensor_id '
> linux.git/drivers/thermal/rockchip_thermal.c:56: warning: cannot
> understand function prototype: 'enum adc_sort_mode '
> linux.git/drivers/thermal/rockchip_thermal.c:123: warning: Function
> parameter or member 'chn_id' not described in 'rockchip_tsadc_chip'
> linux.git/drivers/thermal/rockchip_thermal.c:123: warning: Function
> parameter or member 'control' not described in 'rockchip_tsadc_chip'
> linux.git/drivers/thermal/rockchip_thermal.c:167: warning: Function
> parameter or member 'sensors' not described in 'rockchip_thermal_data'
> linux.git/drivers/thermal/rockchip_thermal.c:608: warning: Function
> parameter or member 'grf' not described in 'rk_tsadcv2_initialize'
> linux.git/drivers/thermal/rockchip_thermal.c:608: warning: Function
> parameter or member 'regs' not described in 'rk_tsadcv2_initialize'
> linux.git/drivers/thermal/rockchip_thermal.c:608: warning: Function
> parameter or member 'tshut_polarity' not described in
> 'rk_tsadcv2_initialize'
> linux.git/drivers/thermal/rockchip_thermal.c:644: warning: Function
> parameter or member 'grf' not described in 'rk_tsadcv3_initialize'
> linux.git/drivers/thermal/rockchip_thermal.c:644: warning: Function
> parameter or member 'regs' not described in 'rk_tsadcv3_initialize'
> linux.git/drivers/thermal/rockchip_thermal.c:644: warning: Function
> parameter or member 'tshut_polarity' not described in
> 'rk_tsadcv3_initialize'
> linux.git/drivers/thermal/rockchip_thermal.c:732: warning: Function
> parameter or member 'regs' not described in 'rk_tsadcv3_control'
> linux.git/drivers/thermal/rockchip_thermal.c:732: warning: Function
> parameter or member 'enable' not described in 'rk_tsadcv3_control'
> linux.git/drivers/thermal/rockchip_thermal.c:1211: warning: Function
> parameter or member 'reset' not described in
> 'rockchip_thermal_reset_controller'
> 
> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
> ---
>  drivers/thermal/rockchip_thermal.c | 22 ++++++++++++++++------
>  1 file changed, 16 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
> index 343c2f5c5a259..9ed8085bb7924 100644
> --- a/drivers/thermal/rockchip_thermal.c
> +++ b/drivers/thermal/rockchip_thermal.c
> @@ -19,7 +19,7 @@
>  #include <linux/mfd/syscon.h>
>  #include <linux/pinctrl/consumer.h>
>  
> -/**
> +/*
>   * If the temperature over a period of time High,
>   * the resulting TSHUT gave CRU module,let it reset the entire chip,
>   * or via GPIO give PMIC.
> @@ -29,7 +29,7 @@ enum tshut_mode {
>  	TSHUT_MODE_GPIO,
>  };
>  
> -/**
> +/*
>   * The system Temperature Sensors tshut(tshut) polarity
>   * the bit 8 is tshut polarity.
>   * 0: low active, 1: high active
> @@ -39,7 +39,7 @@ enum tshut_polarity {
>  	TSHUT_HIGH_ACTIVE,
>  };
>  
> -/**
> +/*
>   * The system has two Temperature Sensors.
>   * sensor0 is for CPU, and sensor1 is for GPU.
>   */
> @@ -48,7 +48,7 @@ enum sensor_id {
>  	SENSOR_GPU,
>  };
>  
> -/**
> +/*
>   * The conversion table has the adc value and temperature.
>   * ADC_DECREMENT: the adc value is of diminishing.(e.g. rk3288_code_table)
>   * ADC_INCREMENT: the adc value is incremental.(e.g. rk3368_code_table)
> @@ -80,13 +80,14 @@ struct chip_tsadc_table {
>  
>  /**
>   * struct rockchip_tsadc_chip - hold the private data of tsadc chip
> - * @chn_id[SOC_MAX_SENSORS]: the sensor id of chip correspond to the channel
> + * @chn_id: array of sensor ids of chip corresponding to the channel
>   * @chn_num: the channel number of tsadc chip
>   * @tshut_temp: the hardware-controlled shutdown temperature value
>   * @tshut_mode: the hardware-controlled shutdown mode (0:CRU 1:GPIO)
>   * @tshut_polarity: the hardware-controlled active polarity (0:LOW 1:HIGH)
>   * @initialize: SoC special initialize tsadc controller method
>   * @irq_ack: clear the interrupt
> + * @control: enable/disable method for the tsadc controller
>   * @get_temp: get the temperature
>   * @set_alarm_temp: set the high temperature interrupt
>   * @set_tshut_temp: set the hardware-controlled shutdown temperature
> @@ -139,7 +140,7 @@ struct rockchip_thermal_sensor {
>   * @chip: pointer to the platform/configuration data
>   * @pdev: platform device of thermal
>   * @reset: the reset controller of tsadc
> - * @sensors[SOC_MAX_SENSORS]: the thermal sensor
> + * @sensors: array of thermal sensors
>   * @clk: the controller clock is divided by the exteral 24MHz
>   * @pclk: the advanced peripherals bus clock
>   * @grf: the general register file will be used to do static set by software
> @@ -590,6 +591,9 @@ static int rk_tsadcv2_code_to_temp(const struct chip_tsadc_table *table,
>  
>  /**
>   * rk_tsadcv2_initialize - initialize TASDC Controller.
> + * @grf: the general register file will be used to do static set by software
> + * @regs: the base address of tsadc controller
> + * @tshut_polarity: the hardware-controlled active polarity (0:LOW 1:HIGH)
>   *
>   * (1) Set TSADC_V2_AUTO_PERIOD:
>   *     Configure the interleave between every two accessing of
> @@ -624,6 +628,9 @@ static void rk_tsadcv2_initialize(struct regmap *grf, void __iomem *regs,
>  
>  /**
>   * rk_tsadcv3_initialize - initialize TASDC Controller.
> + * @grf: the general register file will be used to do static set by software
> + * @regs: the base address of tsadc controller
> + * @tshut_polarity: the hardware-controlled active polarity (0:LOW 1:HIGH)
>   *
>   * (1) The tsadc control power sequence.
>   *
> @@ -723,6 +730,8 @@ static void rk_tsadcv2_control(void __iomem *regs, bool enable)
>  
>  /**
>   * rk_tsadcv3_control - the tsadc controller is enabled or disabled.
> + * @regs: the base address of tsadc controller
> + * @enable: boolean flag to enable the controller
>   *
>   * NOTE: TSADC controller works at auto mode, and some SoCs need set the
>   * tsadc_q_sel bit on TSADCV2_AUTO_CON[1]. The (1024 - tsadc_q) as output
> @@ -1206,6 +1215,7 @@ rockchip_thermal_register_sensor(struct platform_device *pdev,
>  
>  /**
>   * Reset TSADC Controller, reset all tsadc registers.
> + * @reset: the reset controller of tsadc
>   */
>  static void rockchip_thermal_reset_controller(struct reset_control *reset)
>  {

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>

-- 
viresh

Re: [PATCH 07/11] thermal: rockchip: Appease the kernel-doc deity

[Viresh Kumar]

On 06-11-19, 18:58, Amit Kucheria wrote:
> Replace a comment starting with /** by simply /* to avoid having it
> interpreted as a kernel-doc comment. Describe missing function
> parameters where needed.
> 
> Fixes up the following warnings when compiled with make W=1:
> 
> linux.git/drivers/thermal/rockchip_thermal.c:27: warning: cannot
> understand function prototype: 'enum tshut_mode '
> linux.git/drivers/thermal/rockchip_thermal.c:37: warning: cannot
> understand function prototype: 'enum tshut_polarity '
> linux.git/drivers/thermal/rockchip_thermal.c:46: warning: cannot
> understand function prototype: 'enum sensor_id '
> linux.git/drivers/thermal/rockchip_thermal.c:56: warning: cannot
> understand function prototype: 'enum adc_sort_mode '
> linux.git/drivers/thermal/rockchip_thermal.c:123: warning: Function
> parameter or member 'chn_id' not described in 'rockchip_tsadc_chip'
> linux.git/drivers/thermal/rockchip_thermal.c:123: warning: Function
> parameter or member 'control' not described in 'rockchip_tsadc_chip'
> linux.git/drivers/thermal/rockchip_thermal.c:167: warning: Function
> parameter or member 'sensors' not described in 'rockchip_thermal_data'
> linux.git/drivers/thermal/rockchip_thermal.c:608: warning: Function
> parameter or member 'grf' not described in 'rk_tsadcv2_initialize'
> linux.git/drivers/thermal/rockchip_thermal.c:608: warning: Function
> parameter or member 'regs' not described in 'rk_tsadcv2_initialize'
> linux.git/drivers/thermal/rockchip_thermal.c:608: warning: Function
> parameter or member 'tshut_polarity' not described in
> 'rk_tsadcv2_initialize'
> linux.git/drivers/thermal/rockchip_thermal.c:644: warning: Function
> parameter or member 'grf' not described in 'rk_tsadcv3_initialize'
> linux.git/drivers/thermal/rockchip_thermal.c:644: warning: Function
> parameter or member 'regs' not described in 'rk_tsadcv3_initialize'
> linux.git/drivers/thermal/rockchip_thermal.c:644: warning: Function
> parameter or member 'tshut_polarity' not described in
> 'rk_tsadcv3_initialize'
> linux.git/drivers/thermal/rockchip_thermal.c:732: warning: Function
> parameter or member 'regs' not described in 'rk_tsadcv3_control'
> linux.git/drivers/thermal/rockchip_thermal.c:732: warning: Function
> parameter or member 'enable' not described in 'rk_tsadcv3_control'
> linux.git/drivers/thermal/rockchip_thermal.c:1211: warning: Function
> parameter or member 'reset' not described in
> 'rockchip_thermal_reset_controller'
> 
> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
> ---
>  drivers/thermal/rockchip_thermal.c | 22 ++++++++++++++++------
>  1 file changed, 16 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
> index 343c2f5c5a259..9ed8085bb7924 100644
> --- a/drivers/thermal/rockchip_thermal.c
> +++ b/drivers/thermal/rockchip_thermal.c
> @@ -19,7 +19,7 @@
>  #include <linux/mfd/syscon.h>
>  #include <linux/pinctrl/consumer.h>
>  
> -/**
> +/*
>   * If the temperature over a period of time High,
>   * the resulting TSHUT gave CRU module,let it reset the entire chip,
>   * or via GPIO give PMIC.
> @@ -29,7 +29,7 @@ enum tshut_mode {
>  	TSHUT_MODE_GPIO,
>  };
>  
> -/**
> +/*
>   * The system Temperature Sensors tshut(tshut) polarity
>   * the bit 8 is tshut polarity.
>   * 0: low active, 1: high active
> @@ -39,7 +39,7 @@ enum tshut_polarity {
>  	TSHUT_HIGH_ACTIVE,
>  };
>  
> -/**
> +/*
>   * The system has two Temperature Sensors.
>   * sensor0 is for CPU, and sensor1 is for GPU.
>   */
> @@ -48,7 +48,7 @@ enum sensor_id {
>  	SENSOR_GPU,
>  };
>  
> -/**
> +/*
>   * The conversion table has the adc value and temperature.
>   * ADC_DECREMENT: the adc value is of diminishing.(e.g. rk3288_code_table)
>   * ADC_INCREMENT: the adc value is incremental.(e.g. rk3368_code_table)
> @@ -80,13 +80,14 @@ struct chip_tsadc_table {
>  
>  /**
>   * struct rockchip_tsadc_chip - hold the private data of tsadc chip
> - * @chn_id[SOC_MAX_SENSORS]: the sensor id of chip correspond to the channel
> + * @chn_id: array of sensor ids of chip corresponding to the channel
>   * @chn_num: the channel number of tsadc chip
>   * @tshut_temp: the hardware-controlled shutdown temperature value
>   * @tshut_mode: the hardware-controlled shutdown mode (0:CRU 1:GPIO)
>   * @tshut_polarity: the hardware-controlled active polarity (0:LOW 1:HIGH)
>   * @initialize: SoC special initialize tsadc controller method
>   * @irq_ack: clear the interrupt
> + * @control: enable/disable method for the tsadc controller
>   * @get_temp: get the temperature
>   * @set_alarm_temp: set the high temperature interrupt
>   * @set_tshut_temp: set the hardware-controlled shutdown temperature
> @@ -139,7 +140,7 @@ struct rockchip_thermal_sensor {
>   * @chip: pointer to the platform/configuration data
>   * @pdev: platform device of thermal
>   * @reset: the reset controller of tsadc
> - * @sensors[SOC_MAX_SENSORS]: the thermal sensor
> + * @sensors: array of thermal sensors
>   * @clk: the controller clock is divided by the exteral 24MHz
>   * @pclk: the advanced peripherals bus clock
>   * @grf: the general register file will be used to do static set by software
> @@ -590,6 +591,9 @@ static int rk_tsadcv2_code_to_temp(const struct chip_tsadc_table *table,
>  
>  /**
>   * rk_tsadcv2_initialize - initialize TASDC Controller.
> + * @grf: the general register file will be used to do static set by software
> + * @regs: the base address of tsadc controller
> + * @tshut_polarity: the hardware-controlled active polarity (0:LOW 1:HIGH)
>   *
>   * (1) Set TSADC_V2_AUTO_PERIOD:
>   *     Configure the interleave between every two accessing of
> @@ -624,6 +628,9 @@ static void rk_tsadcv2_initialize(struct regmap *grf, void __iomem *regs,
>  
>  /**
>   * rk_tsadcv3_initialize - initialize TASDC Controller.
> + * @grf: the general register file will be used to do static set by software
> + * @regs: the base address of tsadc controller
> + * @tshut_polarity: the hardware-controlled active polarity (0:LOW 1:HIGH)
>   *
>   * (1) The tsadc control power sequence.
>   *
> @@ -723,6 +730,8 @@ static void rk_tsadcv2_control(void __iomem *regs, bool enable)
>  
>  /**
>   * rk_tsadcv3_control - the tsadc controller is enabled or disabled.
> + * @regs: the base address of tsadc controller
> + * @enable: boolean flag to enable the controller
>   *
>   * NOTE: TSADC controller works at auto mode, and some SoCs need set the
>   * tsadc_q_sel bit on TSADCV2_AUTO_CON[1]. The (1024 - tsadc_q) as output
> @@ -1206,6 +1215,7 @@ rockchip_thermal_register_sensor(struct platform_device *pdev,
>  
>  /**
>   * Reset TSADC Controller, reset all tsadc registers.
> + * @reset: the reset controller of tsadc
>   */
>  static void rockchip_thermal_reset_controller(struct reset_control *reset)
>  {

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>

-- 
viresh

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 08/11] thermal: samsung: Appease the kernel-doc deity

[Amit Kucheria]

Fix up the following warning when compiled with make W=1:

linux.git/drivers/thermal/mtk_thermal.c:374: warning: cannot understand function prototype: 'const struct mtk_thermal_data mt8173_thermal_data = '
linux.git/drivers/thermal/mtk_thermal.c:413: warning: cannot understand function prototype: 'const struct mtk_thermal_data mt2701_thermal_data = '
linux.git/drivers/thermal/mtk_thermal.c:443: warning: cannot understand function prototype: 'const struct mtk_thermal_data mt2712_thermal_data = '
linux.git/drivers/thermal/mtk_thermal.c:499: warning: cannot understand function prototype: 'const struct mtk_thermal_data mt8183_thermal_data = '
linux.git/drivers/thermal/mtk_thermal.c:529: warning: Function parameter or member 'sensno' not described in 'raw_to_mcelsius'

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
---
 drivers/thermal/samsung/exynos_tmu.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index fb2c55123a99e..8193b66a3f831 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -138,7 +138,7 @@ enum soc_type {
 
 /**
  * struct exynos_tmu_data : A structure to hold the private data of the TMU
-	driver
+ *			    driver
  * @id: identifier of the one instance of the TMU controller.
  * @base: base address of the single instance of the TMU controller.
  * @base_second: base address of the common registers of the TMU controller.
@@ -162,8 +162,11 @@ enum soc_type {
  *	0 < reference_voltage <= 31
  * @regulator: pointer to the TMU regulator structure.
  * @reg_conf: pointer to structure to register with core thermal.
+ * @tzd: pointer to thermal_zone_device structure
  * @ntrip: number of supported trip points.
  * @enabled: current status of TMU device
+ * @tmu_set_trip_temp: SoC specific method to set trip (rising threshold)
+ * @tmu_set_trip_hyst: SoC specific to set hysteresis (falling threshold)
  * @tmu_initialize: SoC specific TMU initialization method
  * @tmu_control: SoC specific TMU control method
  * @tmu_read: SoC specific TMU temperature read method
-- 
2.17.1

[PATCH 08/11] thermal: samsung: Appease the kernel-doc deity

[Amit Kucheria]

Fix up the following warning when compiled with make W=1:

linux.git/drivers/thermal/mtk_thermal.c:374: warning: cannot understand function prototype: 'const struct mtk_thermal_data mt8173_thermal_data = '
linux.git/drivers/thermal/mtk_thermal.c:413: warning: cannot understand function prototype: 'const struct mtk_thermal_data mt2701_thermal_data = '
linux.git/drivers/thermal/mtk_thermal.c:443: warning: cannot understand function prototype: 'const struct mtk_thermal_data mt2712_thermal_data = '
linux.git/drivers/thermal/mtk_thermal.c:499: warning: cannot understand function prototype: 'const struct mtk_thermal_data mt8183_thermal_data = '
linux.git/drivers/thermal/mtk_thermal.c:529: warning: Function parameter or member 'sensno' not described in 'raw_to_mcelsius'

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
---
 drivers/thermal/samsung/exynos_tmu.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index fb2c55123a99e..8193b66a3f831 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -138,7 +138,7 @@ enum soc_type {
 
 /**
  * struct exynos_tmu_data : A structure to hold the private data of the TMU
-	driver
+ *			    driver
  * @id: identifier of the one instance of the TMU controller.
  * @base: base address of the single instance of the TMU controller.
  * @base_second: base address of the common registers of the TMU controller.
@@ -162,8 +162,11 @@ enum soc_type {
  *	0 < reference_voltage <= 31
  * @regulator: pointer to the TMU regulator structure.
  * @reg_conf: pointer to structure to register with core thermal.
+ * @tzd: pointer to thermal_zone_device structure
  * @ntrip: number of supported trip points.
  * @enabled: current status of TMU device
+ * @tmu_set_trip_temp: SoC specific method to set trip (rising threshold)
+ * @tmu_set_trip_hyst: SoC specific to set hysteresis (falling threshold)
  * @tmu_initialize: SoC specific TMU initialization method
  * @tmu_control: SoC specific TMU control method
  * @tmu_read: SoC specific TMU temperature read method
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 08/11] thermal: samsung: Appease the kernel-doc deity

[Viresh Kumar]

On 06-11-19, 18:58, Amit Kucheria wrote:
> Fix up the following warning when compiled with make W=1:
> 
> linux.git/drivers/thermal/mtk_thermal.c:374: warning: cannot understand function prototype: 'const struct mtk_thermal_data mt8173_thermal_data = '
> linux.git/drivers/thermal/mtk_thermal.c:413: warning: cannot understand function prototype: 'const struct mtk_thermal_data mt2701_thermal_data = '
> linux.git/drivers/thermal/mtk_thermal.c:443: warning: cannot understand function prototype: 'const struct mtk_thermal_data mt2712_thermal_data = '
> linux.git/drivers/thermal/mtk_thermal.c:499: warning: cannot understand function prototype: 'const struct mtk_thermal_data mt8183_thermal_data = '
> linux.git/drivers/thermal/mtk_thermal.c:529: warning: Function parameter or member 'sensno' not described in 'raw_to_mcelsius'

Incorrect log here.

> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
> ---
>  drivers/thermal/samsung/exynos_tmu.c | 5 ++++-
>  1 file changed, 4 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
> index fb2c55123a99e..8193b66a3f831 100644
> --- a/drivers/thermal/samsung/exynos_tmu.c
> +++ b/drivers/thermal/samsung/exynos_tmu.c
> @@ -138,7 +138,7 @@ enum soc_type {
>  
>  /**
>   * struct exynos_tmu_data : A structure to hold the private data of the TMU
> -	driver
> + *			    driver
>   * @id: identifier of the one instance of the TMU controller.
>   * @base: base address of the single instance of the TMU controller.
>   * @base_second: base address of the common registers of the TMU controller.
> @@ -162,8 +162,11 @@ enum soc_type {
>   *	0 < reference_voltage <= 31
>   * @regulator: pointer to the TMU regulator structure.
>   * @reg_conf: pointer to structure to register with core thermal.
> + * @tzd: pointer to thermal_zone_device structure
>   * @ntrip: number of supported trip points.
>   * @enabled: current status of TMU device
> + * @tmu_set_trip_temp: SoC specific method to set trip (rising threshold)
> + * @tmu_set_trip_hyst: SoC specific to set hysteresis (falling threshold)
>   * @tmu_initialize: SoC specific TMU initialization method
>   * @tmu_control: SoC specific TMU control method
>   * @tmu_read: SoC specific TMU temperature read method
> -- 
> 2.17.1

-- 
viresh

Re: [PATCH 08/11] thermal: samsung: Appease the kernel-doc deity

[Viresh Kumar]

On 06-11-19, 18:58, Amit Kucheria wrote:
> Fix up the following warning when compiled with make W=1:
> 
> linux.git/drivers/thermal/mtk_thermal.c:374: warning: cannot understand function prototype: 'const struct mtk_thermal_data mt8173_thermal_data = '
> linux.git/drivers/thermal/mtk_thermal.c:413: warning: cannot understand function prototype: 'const struct mtk_thermal_data mt2701_thermal_data = '
> linux.git/drivers/thermal/mtk_thermal.c:443: warning: cannot understand function prototype: 'const struct mtk_thermal_data mt2712_thermal_data = '
> linux.git/drivers/thermal/mtk_thermal.c:499: warning: cannot understand function prototype: 'const struct mtk_thermal_data mt8183_thermal_data = '
> linux.git/drivers/thermal/mtk_thermal.c:529: warning: Function parameter or member 'sensno' not described in 'raw_to_mcelsius'

Incorrect log here.

> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
> ---
>  drivers/thermal/samsung/exynos_tmu.c | 5 ++++-
>  1 file changed, 4 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
> index fb2c55123a99e..8193b66a3f831 100644
> --- a/drivers/thermal/samsung/exynos_tmu.c
> +++ b/drivers/thermal/samsung/exynos_tmu.c
> @@ -138,7 +138,7 @@ enum soc_type {
>  
>  /**
>   * struct exynos_tmu_data : A structure to hold the private data of the TMU
> -	driver
> + *			    driver
>   * @id: identifier of the one instance of the TMU controller.
>   * @base: base address of the single instance of the TMU controller.
>   * @base_second: base address of the common registers of the TMU controller.
> @@ -162,8 +162,11 @@ enum soc_type {
>   *	0 < reference_voltage <= 31
>   * @regulator: pointer to the TMU regulator structure.
>   * @reg_conf: pointer to structure to register with core thermal.
> + * @tzd: pointer to thermal_zone_device structure
>   * @ntrip: number of supported trip points.
>   * @enabled: current status of TMU device
> + * @tmu_set_trip_temp: SoC specific method to set trip (rising threshold)
> + * @tmu_set_trip_hyst: SoC specific to set hysteresis (falling threshold)
>   * @tmu_initialize: SoC specific TMU initialization method
>   * @tmu_control: SoC specific TMU control method
>   * @tmu_read: SoC specific TMU temperature read method
> -- 
> 2.17.1

-- 
viresh

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 09/11] thermal: tegra: Appease the kernel-doc deity

[Amit Kucheria]

Fix up the following warning when compiled with make W=1:

linux.git/drivers/thermal/tegra/soctherm.c:369: warning: Function parameter or member 'value' not described in 'ccroc_writel'
linux.git/drivers/thermal/tegra/soctherm.c:369: warning: Excess function parameter 'v' description in 'ccroc_writel'
linux.git/drivers/thermal/tegra/soctherm.c:447: warning: Function parameter or member 'dev' not described in 'enforce_temp_range'
linux.git/drivers/thermal/tegra/soctherm.c:772: warning: Function parameter or member 'sg' not described in 'tegra_soctherm_set_hwtrips'
linux.git/drivers/thermal/tegra/soctherm.c:772: warning: Function parameter or member 'tz' not described in 'tegra_soctherm_set_hwtrips'
linux.git/drivers/thermal/tegra/soctherm.c:944: warning: Function parameter or member 'ts' not described in 'soctherm_oc_intr_enable'
linux.git/drivers/thermal/tegra/soctherm.c:1167: warning: Function parameter or member 'data' not described in 'soctherm_oc_irq_disable'
linux.git/drivers/thermal/tegra/soctherm.c:1167: warning: Excess function parameter 'irq_data' description in 'soctherm_oc_irq_disable'
linux.git/drivers/thermal/tegra/soctherm.c:1224: warning: Function parameter or member 'ctrlr' not described in 'soctherm_irq_domain_xlate_twocell'
linux.git/drivers/thermal/tegra/soctherm.c:1686: warning: Function parameter or member 'pdev' not described in 'soctherm_init_hw_throt_cdev'
linux.git/drivers/thermal/tegra/soctherm.c:1764: warning: Function parameter or member 'ts' not described in 'throttlectl_cpu_level_cfg'
linux.git/drivers/thermal/tegra/soctherm.c:1812: warning: Function parameter or member 'ts' not described in 'throttlectl_cpu_level_select'
linux.git/drivers/thermal/tegra/soctherm.c:1855: warning: Function parameter or member 'ts' not described in 'throttlectl_cpu_mn'
linux.git/drivers/thermal/tegra/soctherm.c:1886: warning: Function parameter or member 'ts' not described in 'throttlectl_gpu_level_select'
linux.git/drivers/thermal/tegra/soctherm.c:1928: warning: Function parameter or member 'ts' not described in 'soctherm_throttle_program'

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
---
 drivers/thermal/tegra/soctherm.c | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

diff --git a/drivers/thermal/tegra/soctherm.c b/drivers/thermal/tegra/soctherm.c
index 5acaad3a594f3..66e0639da4bf2 100644
--- a/drivers/thermal/tegra/soctherm.c
+++ b/drivers/thermal/tegra/soctherm.c
@@ -360,7 +360,7 @@ static struct soctherm_oc_irq_chip_data soc_irq_cdata;
 /**
  * ccroc_writel() - writes a value to a CCROC register
  * @ts: pointer to a struct tegra_soctherm
- * @v: the value to write
+ * @value: the value to write
  * @reg: the register offset
  *
  * Writes @v to @reg.  No return value.
@@ -435,6 +435,7 @@ static int tegra_thermctl_get_temp(void *data, int *out_temp)
 
 /**
  * enforce_temp_range() - check and enforce temperature range [min, max]
+ * @dev: struct device * of the SOC_THERM instance
  * @trip_temp: the trip temperature to check
  *
  * Checks and enforces the permitted temperature range that SOC_THERM
@@ -747,6 +748,8 @@ static int get_hot_temp(struct thermal_zone_device *tz, int *trip, int *temp)
 /**
  * tegra_soctherm_set_hwtrips() - set HW trip point from DT data
  * @dev: struct device * of the SOC_THERM instance
+ * @sg: pointer to the sensor group to set the thermtrip temperature for
+ * @tz: struct thermal_zone_device *
  *
  * Configure the SOC_THERM HW trip points, setting "THERMTRIP"
  * "THROTTLE" trip points , using "thermtrips", "critical" or "hot"
@@ -931,6 +934,7 @@ static irqreturn_t soctherm_thermal_isr_thread(int irq, void *dev_id)
 
 /**
  * soctherm_oc_intr_enable() - Enables the soctherm over-current interrupt
+ * @ts:		pointer to a struct tegra_soctherm
  * @alarm:		The soctherm throttle id
  * @enable:		Flag indicating enable the soctherm over-current
  *			interrupt or disable it
@@ -1156,7 +1160,7 @@ static void soctherm_oc_irq_enable(struct irq_data *data)
 
 /**
  * soctherm_oc_irq_disable() - Disables overcurrent interrupt requests
- * @irq_data:	The interrupt request information
+ * @data:	The interrupt request information
  *
  * Clears the interrupt request enable bit of the overcurrent
  * interrupt request chip data.
@@ -1206,6 +1210,7 @@ static int soctherm_oc_irq_map(struct irq_domain *h, unsigned int virq,
 /**
  * soctherm_irq_domain_xlate_twocell() - xlate for soctherm interrupts
  * @d:      Interrupt request domain
+ * @ctrlr:      Controller device tree node
  * @intspec:    Array of u32s from DTs "interrupt" property
  * @intsize:    Number of values inside the intspec array
  * @out_hwirq:  HW IRQ value associated with this interrupt
@@ -1681,6 +1686,7 @@ static int soctherm_throt_cfg_parse(struct device *dev,
 /**
  * soctherm_init_hw_throt_cdev() - Parse the HW throttle configurations
  * and register them as cooling devices.
+ * @pdev: Pointer to platform_device struct
  */
 static void soctherm_init_hw_throt_cdev(struct platform_device *pdev)
 {
@@ -1751,6 +1757,7 @@ static void soctherm_init_hw_throt_cdev(struct platform_device *pdev)
 
 /**
  * throttlectl_cpu_level_cfg() - programs CCROC NV_THERM level config
+ * @ts: pointer to a struct tegra_soctherm
  * @level: describing the level LOW/MED/HIGH of throttling
  *
  * It's necessary to set up the CPU-local CCROC NV_THERM instance with
@@ -1798,6 +1805,7 @@ static void throttlectl_cpu_level_cfg(struct tegra_soctherm *ts, int level)
 
 /**
  * throttlectl_cpu_level_select() - program CPU pulse skipper config
+ * @ts: pointer to a struct tegra_soctherm
  * @throt: the LIGHT/HEAVY of throttle event id
  *
  * Pulse skippers are used to throttle clock frequencies.  This
@@ -1841,6 +1849,7 @@ static void throttlectl_cpu_level_select(struct tegra_soctherm *ts,
 
 /**
  * throttlectl_cpu_mn() - program CPU pulse skipper configuration
+ * @ts: pointer to a struct tegra_soctherm
  * @throt: the LIGHT/HEAVY of throttle event id
  *
  * Pulse skippers are used to throttle clock frequencies.  This
@@ -1874,6 +1883,7 @@ static void throttlectl_cpu_mn(struct tegra_soctherm *ts,
 
 /**
  * throttlectl_gpu_level_select() - selects throttling level for GPU
+ * @ts: pointer to a struct tegra_soctherm
  * @throt: the LIGHT/HEAVY of throttle event id
  *
  * This function programs soctherm's interface to GK20a NV_THERM to select
@@ -1918,6 +1928,7 @@ static int soctherm_oc_cfg_program(struct tegra_soctherm *ts,
 
 /**
  * soctherm_throttle_program() - programs pulse skippers' configuration
+ * @ts: pointer to a struct tegra_soctherm
  * @throt: the LIGHT/HEAVY of the throttle event id.
  *
  * Pulse skippers are used to throttle clock frequencies.
-- 
2.17.1

Re: [PATCH 09/11] thermal: tegra: Appease the kernel-doc deity

[Viresh Kumar]

On 06-11-19, 18:58, Amit Kucheria wrote:
> Fix up the following warning when compiled with make W=1:
> 
> linux.git/drivers/thermal/tegra/soctherm.c:369: warning: Function parameter or member 'value' not described in 'ccroc_writel'
> linux.git/drivers/thermal/tegra/soctherm.c:369: warning: Excess function parameter 'v' description in 'ccroc_writel'
> linux.git/drivers/thermal/tegra/soctherm.c:447: warning: Function parameter or member 'dev' not described in 'enforce_temp_range'
> linux.git/drivers/thermal/tegra/soctherm.c:772: warning: Function parameter or member 'sg' not described in 'tegra_soctherm_set_hwtrips'
> linux.git/drivers/thermal/tegra/soctherm.c:772: warning: Function parameter or member 'tz' not described in 'tegra_soctherm_set_hwtrips'
> linux.git/drivers/thermal/tegra/soctherm.c:944: warning: Function parameter or member 'ts' not described in 'soctherm_oc_intr_enable'
> linux.git/drivers/thermal/tegra/soctherm.c:1167: warning: Function parameter or member 'data' not described in 'soctherm_oc_irq_disable'
> linux.git/drivers/thermal/tegra/soctherm.c:1167: warning: Excess function parameter 'irq_data' description in 'soctherm_oc_irq_disable'
> linux.git/drivers/thermal/tegra/soctherm.c:1224: warning: Function parameter or member 'ctrlr' not described in 'soctherm_irq_domain_xlate_twocell'
> linux.git/drivers/thermal/tegra/soctherm.c:1686: warning: Function parameter or member 'pdev' not described in 'soctherm_init_hw_throt_cdev'
> linux.git/drivers/thermal/tegra/soctherm.c:1764: warning: Function parameter or member 'ts' not described in 'throttlectl_cpu_level_cfg'
> linux.git/drivers/thermal/tegra/soctherm.c:1812: warning: Function parameter or member 'ts' not described in 'throttlectl_cpu_level_select'
> linux.git/drivers/thermal/tegra/soctherm.c:1855: warning: Function parameter or member 'ts' not described in 'throttlectl_cpu_mn'
> linux.git/drivers/thermal/tegra/soctherm.c:1886: warning: Function parameter or member 'ts' not described in 'throttlectl_gpu_level_select'
> linux.git/drivers/thermal/tegra/soctherm.c:1928: warning: Function parameter or member 'ts' not described in 'soctherm_throttle_program'
> 
> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
> ---
>  drivers/thermal/tegra/soctherm.c | 15 +++++++++++++--
>  1 file changed, 13 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/thermal/tegra/soctherm.c b/drivers/thermal/tegra/soctherm.c
> index 5acaad3a594f3..66e0639da4bf2 100644
> --- a/drivers/thermal/tegra/soctherm.c
> +++ b/drivers/thermal/tegra/soctherm.c
> @@ -360,7 +360,7 @@ static struct soctherm_oc_irq_chip_data soc_irq_cdata;
>  /**
>   * ccroc_writel() - writes a value to a CCROC register
>   * @ts: pointer to a struct tegra_soctherm
> - * @v: the value to write
> + * @value: the value to write
>   * @reg: the register offset
>   *
>   * Writes @v to @reg.  No return value.
> @@ -435,6 +435,7 @@ static int tegra_thermctl_get_temp(void *data, int *out_temp)
>  
>  /**
>   * enforce_temp_range() - check and enforce temperature range [min, max]
> + * @dev: struct device * of the SOC_THERM instance
>   * @trip_temp: the trip temperature to check
>   *
>   * Checks and enforces the permitted temperature range that SOC_THERM
> @@ -747,6 +748,8 @@ static int get_hot_temp(struct thermal_zone_device *tz, int *trip, int *temp)
>  /**
>   * tegra_soctherm_set_hwtrips() - set HW trip point from DT data
>   * @dev: struct device * of the SOC_THERM instance
> + * @sg: pointer to the sensor group to set the thermtrip temperature for
> + * @tz: struct thermal_zone_device *
>   *
>   * Configure the SOC_THERM HW trip points, setting "THERMTRIP"
>   * "THROTTLE" trip points , using "thermtrips", "critical" or "hot"
> @@ -931,6 +934,7 @@ static irqreturn_t soctherm_thermal_isr_thread(int irq, void *dev_id)
>  
>  /**
>   * soctherm_oc_intr_enable() - Enables the soctherm over-current interrupt
> + * @ts:		pointer to a struct tegra_soctherm
>   * @alarm:		The soctherm throttle id
>   * @enable:		Flag indicating enable the soctherm over-current
>   *			interrupt or disable it
> @@ -1156,7 +1160,7 @@ static void soctherm_oc_irq_enable(struct irq_data *data)
>  
>  /**
>   * soctherm_oc_irq_disable() - Disables overcurrent interrupt requests
> - * @irq_data:	The interrupt request information
> + * @data:	The interrupt request information
>   *
>   * Clears the interrupt request enable bit of the overcurrent
>   * interrupt request chip data.
> @@ -1206,6 +1210,7 @@ static int soctherm_oc_irq_map(struct irq_domain *h, unsigned int virq,
>  /**
>   * soctherm_irq_domain_xlate_twocell() - xlate for soctherm interrupts
>   * @d:      Interrupt request domain
> + * @ctrlr:      Controller device tree node
>   * @intspec:    Array of u32s from DTs "interrupt" property
>   * @intsize:    Number of values inside the intspec array
>   * @out_hwirq:  HW IRQ value associated with this interrupt
> @@ -1681,6 +1686,7 @@ static int soctherm_throt_cfg_parse(struct device *dev,
>  /**
>   * soctherm_init_hw_throt_cdev() - Parse the HW throttle configurations
>   * and register them as cooling devices.
> + * @pdev: Pointer to platform_device struct
>   */
>  static void soctherm_init_hw_throt_cdev(struct platform_device *pdev)
>  {
> @@ -1751,6 +1757,7 @@ static void soctherm_init_hw_throt_cdev(struct platform_device *pdev)
>  
>  /**
>   * throttlectl_cpu_level_cfg() - programs CCROC NV_THERM level config
> + * @ts: pointer to a struct tegra_soctherm
>   * @level: describing the level LOW/MED/HIGH of throttling
>   *
>   * It's necessary to set up the CPU-local CCROC NV_THERM instance with
> @@ -1798,6 +1805,7 @@ static void throttlectl_cpu_level_cfg(struct tegra_soctherm *ts, int level)
>  
>  /**
>   * throttlectl_cpu_level_select() - program CPU pulse skipper config
> + * @ts: pointer to a struct tegra_soctherm
>   * @throt: the LIGHT/HEAVY of throttle event id
>   *
>   * Pulse skippers are used to throttle clock frequencies.  This
> @@ -1841,6 +1849,7 @@ static void throttlectl_cpu_level_select(struct tegra_soctherm *ts,
>  
>  /**
>   * throttlectl_cpu_mn() - program CPU pulse skipper configuration
> + * @ts: pointer to a struct tegra_soctherm
>   * @throt: the LIGHT/HEAVY of throttle event id
>   *
>   * Pulse skippers are used to throttle clock frequencies.  This
> @@ -1874,6 +1883,7 @@ static void throttlectl_cpu_mn(struct tegra_soctherm *ts,
>  
>  /**
>   * throttlectl_gpu_level_select() - selects throttling level for GPU
> + * @ts: pointer to a struct tegra_soctherm
>   * @throt: the LIGHT/HEAVY of throttle event id
>   *
>   * This function programs soctherm's interface to GK20a NV_THERM to select
> @@ -1918,6 +1928,7 @@ static int soctherm_oc_cfg_program(struct tegra_soctherm *ts,
>  
>  /**
>   * soctherm_throttle_program() - programs pulse skippers' configuration
> + * @ts: pointer to a struct tegra_soctherm
>   * @throt: the LIGHT/HEAVY of the throttle event id.
>   *
>   * Pulse skippers are used to throttle clock frequencies.

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>

-- 
viresh

[PATCH 10/11] thermal: amlogic: Appease the kernel-doc deity

[Amit Kucheria]

Fix up the following warning when compiled with make W=1:

linux.git/drivers/thermal/amlogic_thermal.c:78: warning: Function parameter or member 'A' not described in 'amlogic_thermal_soc_calib_data'
linux.git/drivers/thermal/amlogic_thermal.c:78: warning: Function parameter or member 'B' not described in 'amlogic_thermal_soc_calib_data'
linux.git/drivers/thermal/amlogic_thermal.c:78: warning: Function parameter or member 'm' not described in 'amlogic_thermal_soc_calib_data'
linux.git/drivers/thermal/amlogic_thermal.c:78: warning: Function parameter or member 'n' not described in 'amlogic_thermal_soc_calib_data'

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
---
 drivers/thermal/amlogic_thermal.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/thermal/amlogic_thermal.c b/drivers/thermal/amlogic_thermal.c
index 8a9e9bc421c68..ccb1fe18e9931 100644
--- a/drivers/thermal/amlogic_thermal.c
+++ b/drivers/thermal/amlogic_thermal.c
@@ -67,7 +67,11 @@
 
 /**
  * struct amlogic_thermal_soc_calib_data
- * @A, B, m, n: calibration parameters
+ * @A: calibration parameters
+ * @B: calibration parameters
+ * @m: calibration parameters
+ * @n: calibration parameters
+ *
  * This structure is required for configuration of amlogic thermal driver.
  */
 struct amlogic_thermal_soc_calib_data {
-- 
2.17.1

[PATCH 10/11] thermal: amlogic: Appease the kernel-doc deity

[Amit Kucheria]

Fix up the following warning when compiled with make W=1:

linux.git/drivers/thermal/amlogic_thermal.c:78: warning: Function parameter or member 'A' not described in 'amlogic_thermal_soc_calib_data'
linux.git/drivers/thermal/amlogic_thermal.c:78: warning: Function parameter or member 'B' not described in 'amlogic_thermal_soc_calib_data'
linux.git/drivers/thermal/amlogic_thermal.c:78: warning: Function parameter or member 'm' not described in 'amlogic_thermal_soc_calib_data'
linux.git/drivers/thermal/amlogic_thermal.c:78: warning: Function parameter or member 'n' not described in 'amlogic_thermal_soc_calib_data'

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
---
 drivers/thermal/amlogic_thermal.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/thermal/amlogic_thermal.c b/drivers/thermal/amlogic_thermal.c
index 8a9e9bc421c68..ccb1fe18e9931 100644
--- a/drivers/thermal/amlogic_thermal.c
+++ b/drivers/thermal/amlogic_thermal.c
@@ -67,7 +67,11 @@
 
 /**
  * struct amlogic_thermal_soc_calib_data
- * @A, B, m, n: calibration parameters
+ * @A: calibration parameters
+ * @B: calibration parameters
+ * @m: calibration parameters
+ * @n: calibration parameters
+ *
  * This structure is required for configuration of amlogic thermal driver.
  */
 struct amlogic_thermal_soc_calib_data {
-- 
2.17.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 10/11] thermal: amlogic: Appease the kernel-doc deity

[Viresh Kumar]

On 06-11-19, 18:58, Amit Kucheria wrote:
> Fix up the following warning when compiled with make W=1:
> 
> linux.git/drivers/thermal/amlogic_thermal.c:78: warning: Function parameter or member 'A' not described in 'amlogic_thermal_soc_calib_data'
> linux.git/drivers/thermal/amlogic_thermal.c:78: warning: Function parameter or member 'B' not described in 'amlogic_thermal_soc_calib_data'
> linux.git/drivers/thermal/amlogic_thermal.c:78: warning: Function parameter or member 'm' not described in 'amlogic_thermal_soc_calib_data'
> linux.git/drivers/thermal/amlogic_thermal.c:78: warning: Function parameter or member 'n' not described in 'amlogic_thermal_soc_calib_data'
> 
> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
> ---
>  drivers/thermal/amlogic_thermal.c | 6 +++++-
>  1 file changed, 5 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/thermal/amlogic_thermal.c b/drivers/thermal/amlogic_thermal.c
> index 8a9e9bc421c68..ccb1fe18e9931 100644
> --- a/drivers/thermal/amlogic_thermal.c
> +++ b/drivers/thermal/amlogic_thermal.c
> @@ -67,7 +67,11 @@
>  
>  /**
>   * struct amlogic_thermal_soc_calib_data
> - * @A, B, m, n: calibration parameters
> + * @A: calibration parameters
> + * @B: calibration parameters
> + * @m: calibration parameters
> + * @n: calibration parameters
> + *
>   * This structure is required for configuration of amlogic thermal driver.
>   */
>  struct amlogic_thermal_soc_calib_data {

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>

-- 
viresh

Re: [PATCH 10/11] thermal: amlogic: Appease the kernel-doc deity

[Viresh Kumar]

On 06-11-19, 18:58, Amit Kucheria wrote:
> Fix up the following warning when compiled with make W=1:
> 
> linux.git/drivers/thermal/amlogic_thermal.c:78: warning: Function parameter or member 'A' not described in 'amlogic_thermal_soc_calib_data'
> linux.git/drivers/thermal/amlogic_thermal.c:78: warning: Function parameter or member 'B' not described in 'amlogic_thermal_soc_calib_data'
> linux.git/drivers/thermal/amlogic_thermal.c:78: warning: Function parameter or member 'm' not described in 'amlogic_thermal_soc_calib_data'
> linux.git/drivers/thermal/amlogic_thermal.c:78: warning: Function parameter or member 'n' not described in 'amlogic_thermal_soc_calib_data'
> 
> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
> ---
>  drivers/thermal/amlogic_thermal.c | 6 +++++-
>  1 file changed, 5 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/thermal/amlogic_thermal.c b/drivers/thermal/amlogic_thermal.c
> index 8a9e9bc421c68..ccb1fe18e9931 100644
> --- a/drivers/thermal/amlogic_thermal.c
> +++ b/drivers/thermal/amlogic_thermal.c
> @@ -67,7 +67,11 @@
>  
>  /**
>   * struct amlogic_thermal_soc_calib_data
> - * @A, B, m, n: calibration parameters
> + * @A: calibration parameters
> + * @B: calibration parameters
> + * @m: calibration parameters
> + * @n: calibration parameters
> + *
>   * This structure is required for configuration of amlogic thermal driver.
>   */
>  struct amlogic_thermal_soc_calib_data {

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>

-- 
viresh

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 11/11] thermal: zx2967: Appease the kernel-doc deity

[Amit Kucheria]

Fix up the following warning when compiled with make W=1:

linux.git/drivers/thermal/zx2967_thermal.c:57: warning: Function
parameter or member 'dev' not described in 'zx2967_thermal_priv'

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
---
 drivers/thermal/zx2967_thermal.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/thermal/zx2967_thermal.c b/drivers/thermal/zx2967_thermal.c
index 7c8a82c8e1e92..8e3a2d3c2f9a3 100644
--- a/drivers/thermal/zx2967_thermal.c
+++ b/drivers/thermal/zx2967_thermal.c
@@ -45,6 +45,7 @@
  * @clk_topcrm: topcrm clk structure
  * @clk_apb: apb clk structure
  * @regs: pointer to base address of the thermal sensor
+ * @dev: struct device pointer
  */
 
 struct zx2967_thermal_priv {
-- 
2.17.1

[PATCH 11/11] thermal: zx2967: Appease the kernel-doc deity

[Amit Kucheria]

Fix up the following warning when compiled with make W=1:

linux.git/drivers/thermal/zx2967_thermal.c:57: warning: Function
parameter or member 'dev' not described in 'zx2967_thermal_priv'

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
---
 drivers/thermal/zx2967_thermal.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/thermal/zx2967_thermal.c b/drivers/thermal/zx2967_thermal.c
index 7c8a82c8e1e92..8e3a2d3c2f9a3 100644
--- a/drivers/thermal/zx2967_thermal.c
+++ b/drivers/thermal/zx2967_thermal.c
@@ -45,6 +45,7 @@
  * @clk_topcrm: topcrm clk structure
  * @clk_apb: apb clk structure
  * @regs: pointer to base address of the thermal sensor
+ * @dev: struct device pointer
  */
 
 struct zx2967_thermal_priv {
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 11/11] thermal: zx2967: Appease the kernel-doc deity

[Viresh Kumar]

On 06-11-19, 18:58, Amit Kucheria wrote:
> Fix up the following warning when compiled with make W=1:
> 
> linux.git/drivers/thermal/zx2967_thermal.c:57: warning: Function
> parameter or member 'dev' not described in 'zx2967_thermal_priv'
> 
> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
> ---
>  drivers/thermal/zx2967_thermal.c | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/thermal/zx2967_thermal.c b/drivers/thermal/zx2967_thermal.c
> index 7c8a82c8e1e92..8e3a2d3c2f9a3 100644
> --- a/drivers/thermal/zx2967_thermal.c
> +++ b/drivers/thermal/zx2967_thermal.c
> @@ -45,6 +45,7 @@
>   * @clk_topcrm: topcrm clk structure
>   * @clk_apb: apb clk structure
>   * @regs: pointer to base address of the thermal sensor
> + * @dev: struct device pointer
>   */
>  
>  struct zx2967_thermal_priv {

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>

-- 
viresh

Re: [PATCH 11/11] thermal: zx2967: Appease the kernel-doc deity

[Viresh Kumar]

On 06-11-19, 18:58, Amit Kucheria wrote:
> Fix up the following warning when compiled with make W=1:
> 
> linux.git/drivers/thermal/zx2967_thermal.c:57: warning: Function
> parameter or member 'dev' not described in 'zx2967_thermal_priv'
> 
> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
> ---
>  drivers/thermal/zx2967_thermal.c | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/thermal/zx2967_thermal.c b/drivers/thermal/zx2967_thermal.c
> index 7c8a82c8e1e92..8e3a2d3c2f9a3 100644
> --- a/drivers/thermal/zx2967_thermal.c
> +++ b/drivers/thermal/zx2967_thermal.c
> @@ -45,6 +45,7 @@
>   * @clk_topcrm: topcrm clk structure
>   * @clk_apb: apb clk structure
>   * @regs: pointer to base address of the thermal sensor
> + * @dev: struct device pointer
>   */
>  
>  struct zx2967_thermal_priv {

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>

-- 
viresh

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel