[PATCH v1 0/5] Camera support on STM32F746G-DISCO board

[PATCH v1 0/5] Camera support on STM32F746G-DISCO board

[Hugues Fruchet]

This patchset enables OV9655 camera support of STM32F4DIS-CAM extension
board plugged on connector P1 of STM32F746G-DISCO board.

Tested by doing a fullscreen preview with a modified version of yavta [1]
which redirects captured frames to framebuffer:
 yavta -s 480x272 -n 1 --capture=-1 /dev/video0 -D (note the unofficial
 "-D" option for "Display output")

First part of patches brings few fixes in DCMI driver and introduces
internal crop support in order to enable fullscreen preview (480x272)
by cropping VGA sensor output.

Second part relates to devicetree and configuration to enable DCMI on
STM32F746 MCU then enable DCMI and OV9655 support on STM32F746G-DISCO [2].

[1] http://git.ideasonboard.org/?p=yavta.git;a=summary
[2] due to STM32F746G-DISCO support not yet in media tree (4.13-rc1),
    devicetree patches related to STM32F746G-DISCO are not yet provided.

===========
= history =
===========
version 1:
  - Initial submission for code review with restrictions [2].


Hugues Fruchet (5):
  [media] stm32-dcmi: catch dma submission error
  [media] stm32-dcmi: revisit control register handling
  [media] stm32-dcmi: crop sensor image to match user resolution
  ARM: dts: stm32: Enable DCMI support on STM32F746 MCU
  ARM: configs: stm32: DCMI + OV9655 camera support

 arch/arm/boot/dts/stm32f746.dtsi          | 31 +++++++++++++
 arch/arm/configs/stm32_defconfig          |  9 ++++
 drivers/media/platform/stm32/stm32-dcmi.c | 72 ++++++++++++++++++++++++++-----
 3 files changed, 101 insertions(+), 11 deletions(-)

-- 
1.9.1

[PATCH v1 0/5] Camera support on STM32F746G-DISCO board

[Hugues Fruchet]

This patchset enables OV9655 camera support of STM32F4DIS-CAM extension
board plugged on connector P1 of STM32F746G-DISCO board.

Tested by doing a fullscreen preview with a modified version of yavta [1]
which redirects captured frames to framebuffer:
 yavta -s 480x272 -n 1 --capture=-1 /dev/video0 -D (note the unofficial
 "-D" option for "Display output")

First part of patches brings few fixes in DCMI driver and introduces
internal crop support in order to enable fullscreen preview (480x272)
by cropping VGA sensor output.

Second part relates to devicetree and configuration to enable DCMI on
STM32F746 MCU then enable DCMI and OV9655 support on STM32F746G-DISCO [2].

[1] http://git.ideasonboard.org/?p=yavta.git;a=summary
[2] due to STM32F746G-DISCO support not yet in media tree (4.13-rc1),
    devicetree patches related to STM32F746G-DISCO are not yet provided.

===========
= history =
===========
version 1:
  - Initial submission for code review with restrictions [2].


Hugues Fruchet (5):
  [media] stm32-dcmi: catch dma submission error
  [media] stm32-dcmi: revisit control register handling
  [media] stm32-dcmi: crop sensor image to match user resolution
  ARM: dts: stm32: Enable DCMI support on STM32F746 MCU
  ARM: configs: stm32: DCMI + OV9655 camera support

 arch/arm/boot/dts/stm32f746.dtsi          | 31 +++++++++++++
 arch/arm/configs/stm32_defconfig          |  9 ++++
 drivers/media/platform/stm32/stm32-dcmi.c | 72 ++++++++++++++++++++++++++-----
 3 files changed, 101 insertions(+), 11 deletions(-)

-- 
1.9.1

[PATCH v1 0/5] Camera support on STM32F746G-DISCO board

[Hugues Fruchet]

This patchset enables OV9655 camera support of STM32F4DIS-CAM extension
board plugged on connector P1 of STM32F746G-DISCO board.

Tested by doing a fullscreen preview with a modified version of yavta [1]
which redirects captured frames to framebuffer:
 yavta -s 480x272 -n 1 --capture=-1 /dev/video0 -D (note the unofficial
 "-D" option for "Display output")

First part of patches brings few fixes in DCMI driver and introduces
internal crop support in order to enable fullscreen preview (480x272)
by cropping VGA sensor output.

Second part relates to devicetree and configuration to enable DCMI on
STM32F746 MCU then enable DCMI and OV9655 support on STM32F746G-DISCO [2].

[1] http://git.ideasonboard.org/?p=yavta.git;a=summary
[2] due to STM32F746G-DISCO support not yet in media tree (4.13-rc1),
    devicetree patches related to STM32F746G-DISCO are not yet provided.

===========
= history =
===========
version 1:
  - Initial submission for code review with restrictions [2].


Hugues Fruchet (5):
  [media] stm32-dcmi: catch dma submission error
  [media] stm32-dcmi: revisit control register handling
  [media] stm32-dcmi: crop sensor image to match user resolution
  ARM: dts: stm32: Enable DCMI support on STM32F746 MCU
  ARM: configs: stm32: DCMI + OV9655 camera support

 arch/arm/boot/dts/stm32f746.dtsi          | 31 +++++++++++++
 arch/arm/configs/stm32_defconfig          |  9 ++++
 drivers/media/platform/stm32/stm32-dcmi.c | 72 ++++++++++++++++++++++++++-----
 3 files changed, 101 insertions(+), 11 deletions(-)

-- 
1.9.1

[PATCH v1 1/5] [media] stm32-dcmi: catch dma submission error

[Hugues Fruchet]

Test cookie return by dmaengine_submit() and return error if any.

Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
---
 drivers/media/platform/stm32/stm32-dcmi.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/media/platform/stm32/stm32-dcmi.c b/drivers/media/platform/stm32/stm32-dcmi.c
index 83d32a5..0dd5d1c 100644
--- a/drivers/media/platform/stm32/stm32-dcmi.c
+++ b/drivers/media/platform/stm32/stm32-dcmi.c
@@ -295,6 +295,10 @@ static int dcmi_start_dma(struct stm32_dcmi *dcmi,
 
 	/* Push current DMA transaction in the pending queue */
 	dcmi->dma_cookie = dmaengine_submit(desc);
+	if (dma_submit_error(dcmi->dma_cookie)) {
+		dev_err(dcmi->dev, "%s: DMA submission failed\n", __func__);
+		return -ENXIO;
+	}
 
 	dma_async_issue_pending(dcmi->dma_chan);
 
-- 
1.9.1

[PATCH v1 1/5] [media] stm32-dcmi: catch dma submission error

[Hugues Fruchet]

Test cookie return by dmaengine_submit() and return error if any.

Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
---
 drivers/media/platform/stm32/stm32-dcmi.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/media/platform/stm32/stm32-dcmi.c b/drivers/media/platform/stm32/stm32-dcmi.c
index 83d32a5..0dd5d1c 100644
--- a/drivers/media/platform/stm32/stm32-dcmi.c
+++ b/drivers/media/platform/stm32/stm32-dcmi.c
@@ -295,6 +295,10 @@ static int dcmi_start_dma(struct stm32_dcmi *dcmi,
 
 	/* Push current DMA transaction in the pending queue */
 	dcmi->dma_cookie = dmaengine_submit(desc);
+	if (dma_submit_error(dcmi->dma_cookie)) {
+		dev_err(dcmi->dev, "%s: DMA submission failed\n", __func__);
+		return -ENXIO;
+	}
 
 	dma_async_issue_pending(dcmi->dma_chan);
 
-- 
1.9.1

[PATCH v1 1/5] [media] stm32-dcmi: catch dma submission error

[Hugues Fruchet]

Test cookie return by dmaengine_submit() and return error if any.

Signed-off-by: Hugues Fruchet <hugues.fruchet-qxv4g6HH51o@public.gmane.org>
---
 drivers/media/platform/stm32/stm32-dcmi.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/media/platform/stm32/stm32-dcmi.c b/drivers/media/platform/stm32/stm32-dcmi.c
index 83d32a5..0dd5d1c 100644
--- a/drivers/media/platform/stm32/stm32-dcmi.c
+++ b/drivers/media/platform/stm32/stm32-dcmi.c
@@ -295,6 +295,10 @@ static int dcmi_start_dma(struct stm32_dcmi *dcmi,
 
 	/* Push current DMA transaction in the pending queue */
 	dcmi->dma_cookie = dmaengine_submit(desc);
+	if (dma_submit_error(dcmi->dma_cookie)) {
+		dev_err(dcmi->dev, "%s: DMA submission failed\n", __func__);
+		return -ENXIO;
+	}
 
 	dma_async_issue_pending(dcmi->dma_chan);
 
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v1 2/5] [media] stm32-dcmi: revisit control register handling

[Hugues Fruchet]

Simplify bits handling of DCMI_CR register.

Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
---
 drivers/media/platform/stm32/stm32-dcmi.c | 14 ++++----------
 1 file changed, 4 insertions(+), 10 deletions(-)

diff --git a/drivers/media/platform/stm32/stm32-dcmi.c b/drivers/media/platform/stm32/stm32-dcmi.c
index 0dd5d1c..75d53aa 100644
--- a/drivers/media/platform/stm32/stm32-dcmi.c
+++ b/drivers/media/platform/stm32/stm32-dcmi.c
@@ -490,7 +490,7 @@ static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count)
 {
 	struct stm32_dcmi *dcmi = vb2_get_drv_priv(vq);
 	struct dcmi_buf *buf, *node;
-	u32 val;
+	u32 val = 0;
 	int ret;
 
 	ret = clk_enable(dcmi->mclk);
@@ -510,22 +510,16 @@ static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count)
 
 	spin_lock_irq(&dcmi->irqlock);
 
-	val = reg_read(dcmi->regs, DCMI_CR);
-
-	val &= ~(CR_PCKPOL | CR_HSPOL | CR_VSPOL |
-		 CR_EDM_0 | CR_EDM_1 | CR_FCRC_0 |
-		 CR_FCRC_1 | CR_JPEG | CR_ESS);
-
 	/* Set bus width */
 	switch (dcmi->bus.bus_width) {
 	case 14:
-		val &= CR_EDM_0 + CR_EDM_1;
+		val |= CR_EDM_0 | CR_EDM_1;
 		break;
 	case 12:
-		val &= CR_EDM_1;
+		val |= CR_EDM_1;
 		break;
 	case 10:
-		val &= CR_EDM_0;
+		val |= CR_EDM_0;
 		break;
 	default:
 		/* Set bus width to 8 bits by default */
-- 
1.9.1

[PATCH v1 2/5] [media] stm32-dcmi: revisit control register handling

[Hugues Fruchet]

Simplify bits handling of DCMI_CR register.

Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
---
 drivers/media/platform/stm32/stm32-dcmi.c | 14 ++++----------
 1 file changed, 4 insertions(+), 10 deletions(-)

diff --git a/drivers/media/platform/stm32/stm32-dcmi.c b/drivers/media/platform/stm32/stm32-dcmi.c
index 0dd5d1c..75d53aa 100644
--- a/drivers/media/platform/stm32/stm32-dcmi.c
+++ b/drivers/media/platform/stm32/stm32-dcmi.c
@@ -490,7 +490,7 @@ static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count)
 {
 	struct stm32_dcmi *dcmi = vb2_get_drv_priv(vq);
 	struct dcmi_buf *buf, *node;
-	u32 val;
+	u32 val = 0;
 	int ret;
 
 	ret = clk_enable(dcmi->mclk);
@@ -510,22 +510,16 @@ static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count)
 
 	spin_lock_irq(&dcmi->irqlock);
 
-	val = reg_read(dcmi->regs, DCMI_CR);
-
-	val &= ~(CR_PCKPOL | CR_HSPOL | CR_VSPOL |
-		 CR_EDM_0 | CR_EDM_1 | CR_FCRC_0 |
-		 CR_FCRC_1 | CR_JPEG | CR_ESS);
-
 	/* Set bus width */
 	switch (dcmi->bus.bus_width) {
 	case 14:
-		val &= CR_EDM_0 + CR_EDM_1;
+		val |= CR_EDM_0 | CR_EDM_1;
 		break;
 	case 12:
-		val &= CR_EDM_1;
+		val |= CR_EDM_1;
 		break;
 	case 10:
-		val &= CR_EDM_0;
+		val |= CR_EDM_0;
 		break;
 	default:
 		/* Set bus width to 8 bits by default */
-- 
1.9.1

[PATCH v1 2/5] [media] stm32-dcmi: revisit control register handling

[Hugues Fruchet]

Simplify bits handling of DCMI_CR register.

Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
---
 drivers/media/platform/stm32/stm32-dcmi.c | 14 ++++----------
 1 file changed, 4 insertions(+), 10 deletions(-)

diff --git a/drivers/media/platform/stm32/stm32-dcmi.c b/drivers/media/platform/stm32/stm32-dcmi.c
index 0dd5d1c..75d53aa 100644
--- a/drivers/media/platform/stm32/stm32-dcmi.c
+++ b/drivers/media/platform/stm32/stm32-dcmi.c
@@ -490,7 +490,7 @@ static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count)
 {
 	struct stm32_dcmi *dcmi = vb2_get_drv_priv(vq);
 	struct dcmi_buf *buf, *node;
-	u32 val;
+	u32 val = 0;
 	int ret;
 
 	ret = clk_enable(dcmi->mclk);
@@ -510,22 +510,16 @@ static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count)
 
 	spin_lock_irq(&dcmi->irqlock);
 
-	val = reg_read(dcmi->regs, DCMI_CR);
-
-	val &= ~(CR_PCKPOL | CR_HSPOL | CR_VSPOL |
-		 CR_EDM_0 | CR_EDM_1 | CR_FCRC_0 |
-		 CR_FCRC_1 | CR_JPEG | CR_ESS);
-
 	/* Set bus width */
 	switch (dcmi->bus.bus_width) {
 	case 14:
-		val &= CR_EDM_0 + CR_EDM_1;
+		val |= CR_EDM_0 | CR_EDM_1;
 		break;
 	case 12:
-		val &= CR_EDM_1;
+		val |= CR_EDM_1;
 		break;
 	case 10:
-		val &= CR_EDM_0;
+		val |= CR_EDM_0;
 		break;
 	default:
 		/* Set bus width to 8 bits by default */
-- 
1.9.1

[PATCH v1 3/5] [media] stm32-dcmi: crop sensor image to match user resolution

[Hugues Fruchet]

Add flexibility on supported resolutions by cropping sensor
image to fit user resolution format request.

Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
---
 drivers/media/platform/stm32/stm32-dcmi.c | 54 ++++++++++++++++++++++++++++++-
 1 file changed, 53 insertions(+), 1 deletion(-)

diff --git a/drivers/media/platform/stm32/stm32-dcmi.c b/drivers/media/platform/stm32/stm32-dcmi.c
index 75d53aa..bc5e052 100644
--- a/drivers/media/platform/stm32/stm32-dcmi.c
+++ b/drivers/media/platform/stm32/stm32-dcmi.c
@@ -131,6 +131,8 @@ struct stm32_dcmi {
 	struct v4l2_async_notifier	notifier;
 	struct dcmi_graph_entity	entity;
 	struct v4l2_format		fmt;
+	struct v4l2_rect		crop;
+	bool				do_crop;
 
 	const struct dcmi_format	**user_formats;
 	unsigned int			num_user_formats;
@@ -538,6 +540,27 @@ static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count)
 	if (dcmi->bus.flags & V4L2_MBUS_PCLK_SAMPLE_RISING)
 		val |= CR_PCKPOL;
 
+	if (dcmi->do_crop) {
+		u32 size, start;
+
+		/* Crop resolution */
+		size = ((dcmi->crop.height - 1) << 16) |
+			((dcmi->crop.width << 1) - 1);
+		reg_write(dcmi->regs, DCMI_CWSIZE, size);
+
+		/* Crop start point */
+		start = ((dcmi->crop.top) << 16) |
+			 ((dcmi->crop.left << 1));
+		reg_write(dcmi->regs, DCMI_CWSTRT, start);
+
+		dev_dbg(dcmi->dev, "Cropping to %ux%u@%u:%u\n",
+			dcmi->crop.width, dcmi->crop.height,
+			dcmi->crop.left, dcmi->crop.top);
+
+		/* Enable crop */
+		val |= CR_CROP;
+	};
+
 	reg_write(dcmi->regs, DCMI_CR, val);
 
 	/* Enable dcmi */
@@ -707,6 +730,8 @@ static int dcmi_try_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f,
 		.which = V4L2_SUBDEV_FORMAT_TRY,
 	};
 	int ret;
+	__u32 width, height;
+	struct v4l2_mbus_framefmt *mf = &format.format;
 
 	dcmi_fmt = find_format_by_fourcc(dcmi, pixfmt->pixelformat);
 	if (!dcmi_fmt) {
@@ -724,8 +749,18 @@ static int dcmi_try_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f,
 	if (ret < 0)
 		return ret;
 
+	/* Align format on what sensor can do */
+	width = pixfmt->width;
+	height = pixfmt->height;
 	v4l2_fill_pix_format(pixfmt, &format.format);
 
+	/* We can do any resolution thanks to crop */
+	if ((mf->width > width) || (mf->height > height)) {
+		/* Restore width/height */
+		pixfmt->width = width;
+		pixfmt->height = height;
+	};
+
 	pixfmt->field = V4L2_FIELD_NONE;
 	pixfmt->bytesperline = pixfmt->width * dcmi_fmt->bpp;
 	pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height;
@@ -741,6 +776,8 @@ static int dcmi_set_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f)
 	struct v4l2_subdev_format format = {
 		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
 	};
+	struct v4l2_mbus_framefmt *mf = &format.format;
+	struct v4l2_pix_format *pixfmt = &f->fmt.pix;
 	const struct dcmi_format *current_fmt;
 	int ret;
 
@@ -748,13 +785,28 @@ static int dcmi_set_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f)
 	if (ret)
 		return ret;
 
-	v4l2_fill_mbus_format(&format.format, &f->fmt.pix,
+	v4l2_fill_mbus_format(&format.format, pixfmt,
 			      current_fmt->mbus_code);
 	ret = v4l2_subdev_call(dcmi->entity.subdev, pad,
 			       set_fmt, NULL, &format);
 	if (ret < 0)
 		return ret;
 
+	/* Enable crop if sensor resolution is larger than request */
+	dcmi->do_crop = false;
+	if ((mf->width > pixfmt->width) || (mf->height > pixfmt->height)) {
+		dcmi->crop.width = pixfmt->width;
+		dcmi->crop.height = pixfmt->height;
+		dcmi->crop.left = (mf->width - pixfmt->width) / 2;
+		dcmi->crop.top = (mf->height - pixfmt->height) / 2;
+		dcmi->do_crop = true;
+
+		dev_dbg(dcmi->dev, "%ux%u cropped to %ux%u@(%u,%u)\n",
+			mf->width, mf->height,
+			dcmi->crop.width, dcmi->crop.height,
+			dcmi->crop.left, dcmi->crop.top);
+	};
+
 	dcmi->fmt = *f;
 	dcmi->current_fmt = current_fmt;
 
-- 
1.9.1

[PATCH v1 3/5] [media] stm32-dcmi: crop sensor image to match user resolution

[Hugues Fruchet]

Add flexibility on supported resolutions by cropping sensor
image to fit user resolution format request.

Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
---
 drivers/media/platform/stm32/stm32-dcmi.c | 54 ++++++++++++++++++++++++++++++-
 1 file changed, 53 insertions(+), 1 deletion(-)

diff --git a/drivers/media/platform/stm32/stm32-dcmi.c b/drivers/media/platform/stm32/stm32-dcmi.c
index 75d53aa..bc5e052 100644
--- a/drivers/media/platform/stm32/stm32-dcmi.c
+++ b/drivers/media/platform/stm32/stm32-dcmi.c
@@ -131,6 +131,8 @@ struct stm32_dcmi {
 	struct v4l2_async_notifier	notifier;
 	struct dcmi_graph_entity	entity;
 	struct v4l2_format		fmt;
+	struct v4l2_rect		crop;
+	bool				do_crop;
 
 	const struct dcmi_format	**user_formats;
 	unsigned int			num_user_formats;
@@ -538,6 +540,27 @@ static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count)
 	if (dcmi->bus.flags & V4L2_MBUS_PCLK_SAMPLE_RISING)
 		val |= CR_PCKPOL;
 
+	if (dcmi->do_crop) {
+		u32 size, start;
+
+		/* Crop resolution */
+		size = ((dcmi->crop.height - 1) << 16) |
+			((dcmi->crop.width << 1) - 1);
+		reg_write(dcmi->regs, DCMI_CWSIZE, size);
+
+		/* Crop start point */
+		start = ((dcmi->crop.top) << 16) |
+			 ((dcmi->crop.left << 1));
+		reg_write(dcmi->regs, DCMI_CWSTRT, start);
+
+		dev_dbg(dcmi->dev, "Cropping to %ux%u@%u:%u\n",
+			dcmi->crop.width, dcmi->crop.height,
+			dcmi->crop.left, dcmi->crop.top);
+
+		/* Enable crop */
+		val |= CR_CROP;
+	};
+
 	reg_write(dcmi->regs, DCMI_CR, val);
 
 	/* Enable dcmi */
@@ -707,6 +730,8 @@ static int dcmi_try_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f,
 		.which = V4L2_SUBDEV_FORMAT_TRY,
 	};
 	int ret;
+	__u32 width, height;
+	struct v4l2_mbus_framefmt *mf = &format.format;
 
 	dcmi_fmt = find_format_by_fourcc(dcmi, pixfmt->pixelformat);
 	if (!dcmi_fmt) {
@@ -724,8 +749,18 @@ static int dcmi_try_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f,
 	if (ret < 0)
 		return ret;
 
+	/* Align format on what sensor can do */
+	width = pixfmt->width;
+	height = pixfmt->height;
 	v4l2_fill_pix_format(pixfmt, &format.format);
 
+	/* We can do any resolution thanks to crop */
+	if ((mf->width > width) || (mf->height > height)) {
+		/* Restore width/height */
+		pixfmt->width = width;
+		pixfmt->height = height;
+	};
+
 	pixfmt->field = V4L2_FIELD_NONE;
 	pixfmt->bytesperline = pixfmt->width * dcmi_fmt->bpp;
 	pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height;
@@ -741,6 +776,8 @@ static int dcmi_set_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f)
 	struct v4l2_subdev_format format = {
 		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
 	};
+	struct v4l2_mbus_framefmt *mf = &format.format;
+	struct v4l2_pix_format *pixfmt = &f->fmt.pix;
 	const struct dcmi_format *current_fmt;
 	int ret;
 
@@ -748,13 +785,28 @@ static int dcmi_set_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f)
 	if (ret)
 		return ret;
 
-	v4l2_fill_mbus_format(&format.format, &f->fmt.pix,
+	v4l2_fill_mbus_format(&format.format, pixfmt,
 			      current_fmt->mbus_code);
 	ret = v4l2_subdev_call(dcmi->entity.subdev, pad,
 			       set_fmt, NULL, &format);
 	if (ret < 0)
 		return ret;
 
+	/* Enable crop if sensor resolution is larger than request */
+	dcmi->do_crop = false;
+	if ((mf->width > pixfmt->width) || (mf->height > pixfmt->height)) {
+		dcmi->crop.width = pixfmt->width;
+		dcmi->crop.height = pixfmt->height;
+		dcmi->crop.left = (mf->width - pixfmt->width) / 2;
+		dcmi->crop.top = (mf->height - pixfmt->height) / 2;
+		dcmi->do_crop = true;
+
+		dev_dbg(dcmi->dev, "%ux%u cropped to %ux%u@(%u,%u)\n",
+			mf->width, mf->height,
+			dcmi->crop.width, dcmi->crop.height,
+			dcmi->crop.left, dcmi->crop.top);
+	};
+
 	dcmi->fmt = *f;
 	dcmi->current_fmt = current_fmt;
 
-- 
1.9.1

[PATCH v1 3/5] [media] stm32-dcmi: crop sensor image to match user resolution

[Hugues Fruchet]

Add flexibility on supported resolutions by cropping sensor
image to fit user resolution format request.

Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
---
 drivers/media/platform/stm32/stm32-dcmi.c | 54 ++++++++++++++++++++++++++++++-
 1 file changed, 53 insertions(+), 1 deletion(-)

diff --git a/drivers/media/platform/stm32/stm32-dcmi.c b/drivers/media/platform/stm32/stm32-dcmi.c
index 75d53aa..bc5e052 100644
--- a/drivers/media/platform/stm32/stm32-dcmi.c
+++ b/drivers/media/platform/stm32/stm32-dcmi.c
@@ -131,6 +131,8 @@ struct stm32_dcmi {
 	struct v4l2_async_notifier	notifier;
 	struct dcmi_graph_entity	entity;
 	struct v4l2_format		fmt;
+	struct v4l2_rect		crop;
+	bool				do_crop;
 
 	const struct dcmi_format	**user_formats;
 	unsigned int			num_user_formats;
@@ -538,6 +540,27 @@ static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count)
 	if (dcmi->bus.flags & V4L2_MBUS_PCLK_SAMPLE_RISING)
 		val |= CR_PCKPOL;
 
+	if (dcmi->do_crop) {
+		u32 size, start;
+
+		/* Crop resolution */
+		size = ((dcmi->crop.height - 1) << 16) |
+			((dcmi->crop.width << 1) - 1);
+		reg_write(dcmi->regs, DCMI_CWSIZE, size);
+
+		/* Crop start point */
+		start = ((dcmi->crop.top) << 16) |
+			 ((dcmi->crop.left << 1));
+		reg_write(dcmi->regs, DCMI_CWSTRT, start);
+
+		dev_dbg(dcmi->dev, "Cropping to %ux%u@%u:%u\n",
+			dcmi->crop.width, dcmi->crop.height,
+			dcmi->crop.left, dcmi->crop.top);
+
+		/* Enable crop */
+		val |= CR_CROP;
+	};
+
 	reg_write(dcmi->regs, DCMI_CR, val);
 
 	/* Enable dcmi */
@@ -707,6 +730,8 @@ static int dcmi_try_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f,
 		.which = V4L2_SUBDEV_FORMAT_TRY,
 	};
 	int ret;
+	__u32 width, height;
+	struct v4l2_mbus_framefmt *mf = &format.format;
 
 	dcmi_fmt = find_format_by_fourcc(dcmi, pixfmt->pixelformat);
 	if (!dcmi_fmt) {
@@ -724,8 +749,18 @@ static int dcmi_try_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f,
 	if (ret < 0)
 		return ret;
 
+	/* Align format on what sensor can do */
+	width = pixfmt->width;
+	height = pixfmt->height;
 	v4l2_fill_pix_format(pixfmt, &format.format);
 
+	/* We can do any resolution thanks to crop */
+	if ((mf->width > width) || (mf->height > height)) {
+		/* Restore width/height */
+		pixfmt->width = width;
+		pixfmt->height = height;
+	};
+
 	pixfmt->field = V4L2_FIELD_NONE;
 	pixfmt->bytesperline = pixfmt->width * dcmi_fmt->bpp;
 	pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height;
@@ -741,6 +776,8 @@ static int dcmi_set_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f)
 	struct v4l2_subdev_format format = {
 		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
 	};
+	struct v4l2_mbus_framefmt *mf = &format.format;
+	struct v4l2_pix_format *pixfmt = &f->fmt.pix;
 	const struct dcmi_format *current_fmt;
 	int ret;
 
@@ -748,13 +785,28 @@ static int dcmi_set_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f)
 	if (ret)
 		return ret;
 
-	v4l2_fill_mbus_format(&format.format, &f->fmt.pix,
+	v4l2_fill_mbus_format(&format.format, pixfmt,
 			      current_fmt->mbus_code);
 	ret = v4l2_subdev_call(dcmi->entity.subdev, pad,
 			       set_fmt, NULL, &format);
 	if (ret < 0)
 		return ret;
 
+	/* Enable crop if sensor resolution is larger than request */
+	dcmi->do_crop = false;
+	if ((mf->width > pixfmt->width) || (mf->height > pixfmt->height)) {
+		dcmi->crop.width = pixfmt->width;
+		dcmi->crop.height = pixfmt->height;
+		dcmi->crop.left = (mf->width - pixfmt->width) / 2;
+		dcmi->crop.top = (mf->height - pixfmt->height) / 2;
+		dcmi->do_crop = true;
+
+		dev_dbg(dcmi->dev, "%ux%u cropped to %ux%u@(%u,%u)\n",
+			mf->width, mf->height,
+			dcmi->crop.width, dcmi->crop.height,
+			dcmi->crop.left, dcmi->crop.top);
+	};
+
 	dcmi->fmt = *f;
 	dcmi->current_fmt = current_fmt;
 
-- 
1.9.1

Re: [PATCH v1 3/5] [media] stm32-dcmi: crop sensor image to match user resolution

[Hans Verkuil]

On 06/22/2017 05:12 PM, Hugues Fruchet wrote:
> Add flexibility on supported resolutions by cropping sensor
> image to fit user resolution format request.
> 
> Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
> ---
>   drivers/media/platform/stm32/stm32-dcmi.c | 54 ++++++++++++++++++++++++++++++-
>   1 file changed, 53 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/media/platform/stm32/stm32-dcmi.c b/drivers/media/platform/stm32/stm32-dcmi.c
> index 75d53aa..bc5e052 100644
> --- a/drivers/media/platform/stm32/stm32-dcmi.c
> +++ b/drivers/media/platform/stm32/stm32-dcmi.c
> @@ -131,6 +131,8 @@ struct stm32_dcmi {
>   	struct v4l2_async_notifier	notifier;
>   	struct dcmi_graph_entity	entity;
>   	struct v4l2_format		fmt;
> +	struct v4l2_rect		crop;
> +	bool				do_crop;
>   
>   	const struct dcmi_format	**user_formats;
>   	unsigned int			num_user_formats;
> @@ -538,6 +540,27 @@ static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count)
>   	if (dcmi->bus.flags & V4L2_MBUS_PCLK_SAMPLE_RISING)
>   		val |= CR_PCKPOL;
>   
> +	if (dcmi->do_crop) {
> +		u32 size, start;
> +
> +		/* Crop resolution */
> +		size = ((dcmi->crop.height - 1) << 16) |
> +			((dcmi->crop.width << 1) - 1);
> +		reg_write(dcmi->regs, DCMI_CWSIZE, size);
> +
> +		/* Crop start point */
> +		start = ((dcmi->crop.top) << 16) |
> +			 ((dcmi->crop.left << 1));
> +		reg_write(dcmi->regs, DCMI_CWSTRT, start);
> +
> +		dev_dbg(dcmi->dev, "Cropping to %ux%u@%u:%u\n",
> +			dcmi->crop.width, dcmi->crop.height,
> +			dcmi->crop.left, dcmi->crop.top);
> +
> +		/* Enable crop */
> +		val |= CR_CROP;
> +	};
> +
>   	reg_write(dcmi->regs, DCMI_CR, val);
>   
>   	/* Enable dcmi */
> @@ -707,6 +730,8 @@ static int dcmi_try_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f,
>   		.which = V4L2_SUBDEV_FORMAT_TRY,
>   	};
>   	int ret;
> +	__u32 width, height;
> +	struct v4l2_mbus_framefmt *mf = &format.format;
>   
>   	dcmi_fmt = find_format_by_fourcc(dcmi, pixfmt->pixelformat);
>   	if (!dcmi_fmt) {
> @@ -724,8 +749,18 @@ static int dcmi_try_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f,
>   	if (ret < 0)
>   		return ret;
>   
> +	/* Align format on what sensor can do */
> +	width = pixfmt->width;
> +	height = pixfmt->height;
>   	v4l2_fill_pix_format(pixfmt, &format.format);
>   
> +	/* We can do any resolution thanks to crop */
> +	if ((mf->width > width) || (mf->height > height)) {
> +		/* Restore width/height */
> +		pixfmt->width = width;
> +		pixfmt->height = height;
> +	};
> +
>   	pixfmt->field = V4L2_FIELD_NONE;
>   	pixfmt->bytesperline = pixfmt->width * dcmi_fmt->bpp;
>   	pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height;
> @@ -741,6 +776,8 @@ static int dcmi_set_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f)
>   	struct v4l2_subdev_format format = {
>   		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
>   	};
> +	struct v4l2_mbus_framefmt *mf = &format.format;
> +	struct v4l2_pix_format *pixfmt = &f->fmt.pix;
>   	const struct dcmi_format *current_fmt;
>   	int ret;
>   
> @@ -748,13 +785,28 @@ static int dcmi_set_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f)
>   	if (ret)
>   		return ret;
>   
> -	v4l2_fill_mbus_format(&format.format, &f->fmt.pix,
> +	v4l2_fill_mbus_format(&format.format, pixfmt,
>   			      current_fmt->mbus_code);
>   	ret = v4l2_subdev_call(dcmi->entity.subdev, pad,
>   			       set_fmt, NULL, &format);
>   	if (ret < 0)
>   		return ret;
>   
> +	/* Enable crop if sensor resolution is larger than request */
> +	dcmi->do_crop = false;
> +	if ((mf->width > pixfmt->width) || (mf->height > pixfmt->height)) {
> +		dcmi->crop.width = pixfmt->width;
> +		dcmi->crop.height = pixfmt->height;
> +		dcmi->crop.left = (mf->width - pixfmt->width) / 2;
> +		dcmi->crop.top = (mf->height - pixfmt->height) / 2;
> +		dcmi->do_crop = true;

Why not implement the selection API instead? I assume that you can crop from any
region of the sensor, not just the center part.

Regards,

	Hans

> +
> +		dev_dbg(dcmi->dev, "%ux%u cropped to %ux%u@(%u,%u)\n",
> +			mf->width, mf->height,
> +			dcmi->crop.width, dcmi->crop.height,
> +			dcmi->crop.left, dcmi->crop.top);
> +	};
> +
>   	dcmi->fmt = *f;
>   	dcmi->current_fmt = current_fmt;
>   
> 

[PATCH v1 3/5] [media] stm32-dcmi: crop sensor image to match user resolution

[Hans Verkuil]

On 06/22/2017 05:12 PM, Hugues Fruchet wrote:
> Add flexibility on supported resolutions by cropping sensor
> image to fit user resolution format request.
> 
> Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
> ---
>   drivers/media/platform/stm32/stm32-dcmi.c | 54 ++++++++++++++++++++++++++++++-
>   1 file changed, 53 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/media/platform/stm32/stm32-dcmi.c b/drivers/media/platform/stm32/stm32-dcmi.c
> index 75d53aa..bc5e052 100644
> --- a/drivers/media/platform/stm32/stm32-dcmi.c
> +++ b/drivers/media/platform/stm32/stm32-dcmi.c
> @@ -131,6 +131,8 @@ struct stm32_dcmi {
>   	struct v4l2_async_notifier	notifier;
>   	struct dcmi_graph_entity	entity;
>   	struct v4l2_format		fmt;
> +	struct v4l2_rect		crop;
> +	bool				do_crop;
>   
>   	const struct dcmi_format	**user_formats;
>   	unsigned int			num_user_formats;
> @@ -538,6 +540,27 @@ static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count)
>   	if (dcmi->bus.flags & V4L2_MBUS_PCLK_SAMPLE_RISING)
>   		val |= CR_PCKPOL;
>   
> +	if (dcmi->do_crop) {
> +		u32 size, start;
> +
> +		/* Crop resolution */
> +		size = ((dcmi->crop.height - 1) << 16) |
> +			((dcmi->crop.width << 1) - 1);
> +		reg_write(dcmi->regs, DCMI_CWSIZE, size);
> +
> +		/* Crop start point */
> +		start = ((dcmi->crop.top) << 16) |
> +			 ((dcmi->crop.left << 1));
> +		reg_write(dcmi->regs, DCMI_CWSTRT, start);
> +
> +		dev_dbg(dcmi->dev, "Cropping to %ux%u@%u:%u\n",
> +			dcmi->crop.width, dcmi->crop.height,
> +			dcmi->crop.left, dcmi->crop.top);
> +
> +		/* Enable crop */
> +		val |= CR_CROP;
> +	};
> +
>   	reg_write(dcmi->regs, DCMI_CR, val);
>   
>   	/* Enable dcmi */
> @@ -707,6 +730,8 @@ static int dcmi_try_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f,
>   		.which = V4L2_SUBDEV_FORMAT_TRY,
>   	};
>   	int ret;
> +	__u32 width, height;
> +	struct v4l2_mbus_framefmt *mf = &format.format;
>   
>   	dcmi_fmt = find_format_by_fourcc(dcmi, pixfmt->pixelformat);
>   	if (!dcmi_fmt) {
> @@ -724,8 +749,18 @@ static int dcmi_try_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f,
>   	if (ret < 0)
>   		return ret;
>   
> +	/* Align format on what sensor can do */
> +	width = pixfmt->width;
> +	height = pixfmt->height;
>   	v4l2_fill_pix_format(pixfmt, &format.format);
>   
> +	/* We can do any resolution thanks to crop */
> +	if ((mf->width > width) || (mf->height > height)) {
> +		/* Restore width/height */
> +		pixfmt->width = width;
> +		pixfmt->height = height;
> +	};
> +
>   	pixfmt->field = V4L2_FIELD_NONE;
>   	pixfmt->bytesperline = pixfmt->width * dcmi_fmt->bpp;
>   	pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height;
> @@ -741,6 +776,8 @@ static int dcmi_set_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f)
>   	struct v4l2_subdev_format format = {
>   		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
>   	};
> +	struct v4l2_mbus_framefmt *mf = &format.format;
> +	struct v4l2_pix_format *pixfmt = &f->fmt.pix;
>   	const struct dcmi_format *current_fmt;
>   	int ret;
>   
> @@ -748,13 +785,28 @@ static int dcmi_set_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f)
>   	if (ret)
>   		return ret;
>   
> -	v4l2_fill_mbus_format(&format.format, &f->fmt.pix,
> +	v4l2_fill_mbus_format(&format.format, pixfmt,
>   			      current_fmt->mbus_code);
>   	ret = v4l2_subdev_call(dcmi->entity.subdev, pad,
>   			       set_fmt, NULL, &format);
>   	if (ret < 0)
>   		return ret;
>   
> +	/* Enable crop if sensor resolution is larger than request */
> +	dcmi->do_crop = false;
> +	if ((mf->width > pixfmt->width) || (mf->height > pixfmt->height)) {
> +		dcmi->crop.width = pixfmt->width;
> +		dcmi->crop.height = pixfmt->height;
> +		dcmi->crop.left = (mf->width - pixfmt->width) / 2;
> +		dcmi->crop.top = (mf->height - pixfmt->height) / 2;
> +		dcmi->do_crop = true;

Why not implement the selection API instead? I assume that you can crop from any
region of the sensor, not just the center part.

Regards,

	Hans

> +
> +		dev_dbg(dcmi->dev, "%ux%u cropped to %ux%u@(%u,%u)\n",
> +			mf->width, mf->height,
> +			dcmi->crop.width, dcmi->crop.height,
> +			dcmi->crop.left, dcmi->crop.top);
> +	};
> +
>   	dcmi->fmt = *f;
>   	dcmi->current_fmt = current_fmt;
>   
> 

Re: [PATCH v1 3/5] [media] stm32-dcmi: crop sensor image to match user resolution

[Hugues FRUCHET]

Hi Hans, thanks for review.

Reply below.

BR
Hugues.

On 06/22/2017 05:19 PM, Hans Verkuil wrote:
> On 06/22/2017 05:12 PM, Hugues Fruchet wrote:
>> Add flexibility on supported resolutions by cropping sensor
>> image to fit user resolution format request.
>>
>> Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
>> ---
>>    drivers/media/platform/stm32/stm32-dcmi.c | 54 ++++++++++++++++++++++++++++++-
>>    1 file changed, 53 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/media/platform/stm32/stm32-dcmi.c b/drivers/media/platform/stm32/stm32-dcmi.c
>> index 75d53aa..bc5e052 100644
>> --- a/drivers/media/platform/stm32/stm32-dcmi.c
>> +++ b/drivers/media/platform/stm32/stm32-dcmi.c
>> @@ -131,6 +131,8 @@ struct stm32_dcmi {
>>    	struct v4l2_async_notifier	notifier;
>>    	struct dcmi_graph_entity	entity;
>>    	struct v4l2_format		fmt;
>> +	struct v4l2_rect		crop;
>> +	bool				do_crop;
>>    
>>    	const struct dcmi_format	**user_formats;
>>    	unsigned int			num_user_formats;
>> @@ -538,6 +540,27 @@ static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count)
>>    	if (dcmi->bus.flags & V4L2_MBUS_PCLK_SAMPLE_RISING)
>>    		val |= CR_PCKPOL;
>>    
>> +	if (dcmi->do_crop) {
>> +		u32 size, start;
>> +
>> +		/* Crop resolution */
>> +		size = ((dcmi->crop.height - 1) << 16) |
>> +			((dcmi->crop.width << 1) - 1);
>> +		reg_write(dcmi->regs, DCMI_CWSIZE, size);
>> +
>> +		/* Crop start point */
>> +		start = ((dcmi->crop.top) << 16) |
>> +			 ((dcmi->crop.left << 1));
>> +		reg_write(dcmi->regs, DCMI_CWSTRT, start);
>> +
>> +		dev_dbg(dcmi->dev, "Cropping to %ux%u@%u:%u\n",
>> +			dcmi->crop.width, dcmi->crop.height,
>> +			dcmi->crop.left, dcmi->crop.top);
>> +
>> +		/* Enable crop */
>> +		val |= CR_CROP;
>> +	};
>> +
>>    	reg_write(dcmi->regs, DCMI_CR, val);
>>    
>>    	/* Enable dcmi */
>> @@ -707,6 +730,8 @@ static int dcmi_try_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f,
>>    		.which = V4L2_SUBDEV_FORMAT_TRY,
>>    	};
>>    	int ret;
>> +	__u32 width, height;
>> +	struct v4l2_mbus_framefmt *mf = &format.format;
>>    
>>    	dcmi_fmt = find_format_by_fourcc(dcmi, pixfmt->pixelformat);
>>    	if (!dcmi_fmt) {
>> @@ -724,8 +749,18 @@ static int dcmi_try_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f,
>>    	if (ret < 0)
>>    		return ret;
>>    
>> +	/* Align format on what sensor can do */
>> +	width = pixfmt->width;
>> +	height = pixfmt->height;
>>    	v4l2_fill_pix_format(pixfmt, &format.format);
>>    
>> +	/* We can do any resolution thanks to crop */
>> +	if ((mf->width > width) || (mf->height > height)) {
>> +		/* Restore width/height */
>> +		pixfmt->width = width;
>> +		pixfmt->height = height;
>> +	};
>> +
>>    	pixfmt->field = V4L2_FIELD_NONE;
>>    	pixfmt->bytesperline = pixfmt->width * dcmi_fmt->bpp;
>>    	pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height;
>> @@ -741,6 +776,8 @@ static int dcmi_set_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f)
>>    	struct v4l2_subdev_format format = {
>>    		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
>>    	};
>> +	struct v4l2_mbus_framefmt *mf = &format.format;
>> +	struct v4l2_pix_format *pixfmt = &f->fmt.pix;
>>    	const struct dcmi_format *current_fmt;
>>    	int ret;
>>    
>> @@ -748,13 +785,28 @@ static int dcmi_set_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f)
>>    	if (ret)
>>    		return ret;
>>    
>> -	v4l2_fill_mbus_format(&format.format, &f->fmt.pix,
>> +	v4l2_fill_mbus_format(&format.format, pixfmt,
>>    			      current_fmt->mbus_code);
>>    	ret = v4l2_subdev_call(dcmi->entity.subdev, pad,
>>    			       set_fmt, NULL, &format);
>>    	if (ret < 0)
>>    		return ret;
>>    
>> +	/* Enable crop if sensor resolution is larger than request */
>> +	dcmi->do_crop = false;
>> +	if ((mf->width > pixfmt->width) || (mf->height > pixfmt->height)) {
>> +		dcmi->crop.width = pixfmt->width;
>> +		dcmi->crop.height = pixfmt->height;
>> +		dcmi->crop.left = (mf->width - pixfmt->width) / 2;
>> +		dcmi->crop.top = (mf->height - pixfmt->height) / 2;
>> +		dcmi->do_crop = true;
> 
> Why not implement the selection API instead? I assume that you can crop from any
> region of the sensor, not just the center part.

The point here was to add some flexibility for user in term of 
resolution and also less memory consumption.
For example here I want to make a 480x272 preview:
- without this change: S_FMT(480x272) returns VGA (the OV9655 larger 
discrete resolution), then app has to capture VGA frames then crop to 
fit 480x272 frame buffer.
- with this change: S_FMT(480x272) returns 480x272 (crop done by 
hardware), app can directly capture 480x272 then copy to framebuffer 
without any conversion.

Implementation of V4L2 crop using SELECTION API could also be used,
but I need to change app.

More generally, with a given couple ISP+sensor, will S_FMT()
return the sensor only supported resolutions ? or the supported 
resolutions of the couple ISP+sensor (ISP will downscale/upscale/crop
the sensor discrete resolution to fit user request) ?

Hans, what are your recommendations ?

> 
> Regards,
> 
> 	Hans
> 
>> +
>> +		dev_dbg(dcmi->dev, "%ux%u cropped to %ux%u@(%u,%u)\n",
>> +			mf->width, mf->height,
>> +			dcmi->crop.width, dcmi->crop.height,
>> +			dcmi->crop.left, dcmi->crop.top);
>> +	};
>> +
>>    	dcmi->fmt = *f;
>>    	dcmi->current_fmt = current_fmt;
>>    
>>
> 

[PATCH v1 3/5] [media] stm32-dcmi: crop sensor image to match user resolution

[Hugues FRUCHET]

Hi Hans, thanks for review.

Reply below.

BR
Hugues.

On 06/22/2017 05:19 PM, Hans Verkuil wrote:
> On 06/22/2017 05:12 PM, Hugues Fruchet wrote:
>> Add flexibility on supported resolutions by cropping sensor
>> image to fit user resolution format request.
>>
>> Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
>> ---
>>    drivers/media/platform/stm32/stm32-dcmi.c | 54 ++++++++++++++++++++++++++++++-
>>    1 file changed, 53 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/media/platform/stm32/stm32-dcmi.c b/drivers/media/platform/stm32/stm32-dcmi.c
>> index 75d53aa..bc5e052 100644
>> --- a/drivers/media/platform/stm32/stm32-dcmi.c
>> +++ b/drivers/media/platform/stm32/stm32-dcmi.c
>> @@ -131,6 +131,8 @@ struct stm32_dcmi {
>>    	struct v4l2_async_notifier	notifier;
>>    	struct dcmi_graph_entity	entity;
>>    	struct v4l2_format		fmt;
>> +	struct v4l2_rect		crop;
>> +	bool				do_crop;
>>    
>>    	const struct dcmi_format	**user_formats;
>>    	unsigned int			num_user_formats;
>> @@ -538,6 +540,27 @@ static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count)
>>    	if (dcmi->bus.flags & V4L2_MBUS_PCLK_SAMPLE_RISING)
>>    		val |= CR_PCKPOL;
>>    
>> +	if (dcmi->do_crop) {
>> +		u32 size, start;
>> +
>> +		/* Crop resolution */
>> +		size = ((dcmi->crop.height - 1) << 16) |
>> +			((dcmi->crop.width << 1) - 1);
>> +		reg_write(dcmi->regs, DCMI_CWSIZE, size);
>> +
>> +		/* Crop start point */
>> +		start = ((dcmi->crop.top) << 16) |
>> +			 ((dcmi->crop.left << 1));
>> +		reg_write(dcmi->regs, DCMI_CWSTRT, start);
>> +
>> +		dev_dbg(dcmi->dev, "Cropping to %ux%u@%u:%u\n",
>> +			dcmi->crop.width, dcmi->crop.height,
>> +			dcmi->crop.left, dcmi->crop.top);
>> +
>> +		/* Enable crop */
>> +		val |= CR_CROP;
>> +	};
>> +
>>    	reg_write(dcmi->regs, DCMI_CR, val);
>>    
>>    	/* Enable dcmi */
>> @@ -707,6 +730,8 @@ static int dcmi_try_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f,
>>    		.which = V4L2_SUBDEV_FORMAT_TRY,
>>    	};
>>    	int ret;
>> +	__u32 width, height;
>> +	struct v4l2_mbus_framefmt *mf = &format.format;
>>    
>>    	dcmi_fmt = find_format_by_fourcc(dcmi, pixfmt->pixelformat);
>>    	if (!dcmi_fmt) {
>> @@ -724,8 +749,18 @@ static int dcmi_try_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f,
>>    	if (ret < 0)
>>    		return ret;
>>    
>> +	/* Align format on what sensor can do */
>> +	width = pixfmt->width;
>> +	height = pixfmt->height;
>>    	v4l2_fill_pix_format(pixfmt, &format.format);
>>    
>> +	/* We can do any resolution thanks to crop */
>> +	if ((mf->width > width) || (mf->height > height)) {
>> +		/* Restore width/height */
>> +		pixfmt->width = width;
>> +		pixfmt->height = height;
>> +	};
>> +
>>    	pixfmt->field = V4L2_FIELD_NONE;
>>    	pixfmt->bytesperline = pixfmt->width * dcmi_fmt->bpp;
>>    	pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height;
>> @@ -741,6 +776,8 @@ static int dcmi_set_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f)
>>    	struct v4l2_subdev_format format = {
>>    		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
>>    	};
>> +	struct v4l2_mbus_framefmt *mf = &format.format;
>> +	struct v4l2_pix_format *pixfmt = &f->fmt.pix;
>>    	const struct dcmi_format *current_fmt;
>>    	int ret;
>>    
>> @@ -748,13 +785,28 @@ static int dcmi_set_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f)
>>    	if (ret)
>>    		return ret;
>>    
>> -	v4l2_fill_mbus_format(&format.format, &f->fmt.pix,
>> +	v4l2_fill_mbus_format(&format.format, pixfmt,
>>    			      current_fmt->mbus_code);
>>    	ret = v4l2_subdev_call(dcmi->entity.subdev, pad,
>>    			       set_fmt, NULL, &format);
>>    	if (ret < 0)
>>    		return ret;
>>    
>> +	/* Enable crop if sensor resolution is larger than request */
>> +	dcmi->do_crop = false;
>> +	if ((mf->width > pixfmt->width) || (mf->height > pixfmt->height)) {
>> +		dcmi->crop.width = pixfmt->width;
>> +		dcmi->crop.height = pixfmt->height;
>> +		dcmi->crop.left = (mf->width - pixfmt->width) / 2;
>> +		dcmi->crop.top = (mf->height - pixfmt->height) / 2;
>> +		dcmi->do_crop = true;
> 
> Why not implement the selection API instead? I assume that you can crop from any
> region of the sensor, not just the center part.

The point here was to add some flexibility for user in term of 
resolution and also less memory consumption.
For example here I want to make a 480x272 preview:
- without this change: S_FMT(480x272) returns VGA (the OV9655 larger 
discrete resolution), then app has to capture VGA frames then crop to 
fit 480x272 frame buffer.
- with this change: S_FMT(480x272) returns 480x272 (crop done by 
hardware), app can directly capture 480x272 then copy to framebuffer 
without any conversion.

Implementation of V4L2 crop using SELECTION API could also be used,
but I need to change app.

More generally, with a given couple ISP+sensor, will S_FMT()
return the sensor only supported resolutions ? or the supported 
resolutions of the couple ISP+sensor (ISP will downscale/upscale/crop
the sensor discrete resolution to fit user request) ?

Hans, what are your recommendations ?

> 
> Regards,
> 
> 	Hans
> 
>> +
>> +		dev_dbg(dcmi->dev, "%ux%u cropped to %ux%u@(%u,%u)\n",
>> +			mf->width, mf->height,
>> +			dcmi->crop.width, dcmi->crop.height,
>> +			dcmi->crop.left, dcmi->crop.top);
>> +	};
>> +
>>    	dcmi->fmt = *f;
>>    	dcmi->current_fmt = current_fmt;
>>    
>>
> 

Re: [PATCH v1 3/5] [media] stm32-dcmi: crop sensor image to match user resolution

[Hugues FRUCHET]

Hi Hans, thanks for review.

Reply below.

BR
Hugues.

On 06/22/2017 05:19 PM, Hans Verkuil wrote:
> On 06/22/2017 05:12 PM, Hugues Fruchet wrote:
>> Add flexibility on supported resolutions by cropping sensor
>> image to fit user resolution format request.
>>
>> Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
>> ---
>>    drivers/media/platform/stm32/stm32-dcmi.c | 54 ++++++++++++++++++++++++++++++-
>>    1 file changed, 53 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/media/platform/stm32/stm32-dcmi.c b/drivers/media/platform/stm32/stm32-dcmi.c
>> index 75d53aa..bc5e052 100644
>> --- a/drivers/media/platform/stm32/stm32-dcmi.c
>> +++ b/drivers/media/platform/stm32/stm32-dcmi.c
>> @@ -131,6 +131,8 @@ struct stm32_dcmi {
>>    	struct v4l2_async_notifier	notifier;
>>    	struct dcmi_graph_entity	entity;
>>    	struct v4l2_format		fmt;
>> +	struct v4l2_rect		crop;
>> +	bool				do_crop;
>>    
>>    	const struct dcmi_format	**user_formats;
>>    	unsigned int			num_user_formats;
>> @@ -538,6 +540,27 @@ static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count)
>>    	if (dcmi->bus.flags & V4L2_MBUS_PCLK_SAMPLE_RISING)
>>    		val |= CR_PCKPOL;
>>    
>> +	if (dcmi->do_crop) {
>> +		u32 size, start;
>> +
>> +		/* Crop resolution */
>> +		size = ((dcmi->crop.height - 1) << 16) |
>> +			((dcmi->crop.width << 1) - 1);
>> +		reg_write(dcmi->regs, DCMI_CWSIZE, size);
>> +
>> +		/* Crop start point */
>> +		start = ((dcmi->crop.top) << 16) |
>> +			 ((dcmi->crop.left << 1));
>> +		reg_write(dcmi->regs, DCMI_CWSTRT, start);
>> +
>> +		dev_dbg(dcmi->dev, "Cropping to %ux%u@%u:%u\n",
>> +			dcmi->crop.width, dcmi->crop.height,
>> +			dcmi->crop.left, dcmi->crop.top);
>> +
>> +		/* Enable crop */
>> +		val |= CR_CROP;
>> +	};
>> +
>>    	reg_write(dcmi->regs, DCMI_CR, val);
>>    
>>    	/* Enable dcmi */
>> @@ -707,6 +730,8 @@ static int dcmi_try_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f,
>>    		.which = V4L2_SUBDEV_FORMAT_TRY,
>>    	};
>>    	int ret;
>> +	__u32 width, height;
>> +	struct v4l2_mbus_framefmt *mf = &format.format;
>>    
>>    	dcmi_fmt = find_format_by_fourcc(dcmi, pixfmt->pixelformat);
>>    	if (!dcmi_fmt) {
>> @@ -724,8 +749,18 @@ static int dcmi_try_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f,
>>    	if (ret < 0)
>>    		return ret;
>>    
>> +	/* Align format on what sensor can do */
>> +	width = pixfmt->width;
>> +	height = pixfmt->height;
>>    	v4l2_fill_pix_format(pixfmt, &format.format);
>>    
>> +	/* We can do any resolution thanks to crop */
>> +	if ((mf->width > width) || (mf->height > height)) {
>> +		/* Restore width/height */
>> +		pixfmt->width = width;
>> +		pixfmt->height = height;
>> +	};
>> +
>>    	pixfmt->field = V4L2_FIELD_NONE;
>>    	pixfmt->bytesperline = pixfmt->width * dcmi_fmt->bpp;
>>    	pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height;
>> @@ -741,6 +776,8 @@ static int dcmi_set_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f)
>>    	struct v4l2_subdev_format format = {
>>    		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
>>    	};
>> +	struct v4l2_mbus_framefmt *mf = &format.format;
>> +	struct v4l2_pix_format *pixfmt = &f->fmt.pix;
>>    	const struct dcmi_format *current_fmt;
>>    	int ret;
>>    
>> @@ -748,13 +785,28 @@ static int dcmi_set_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f)
>>    	if (ret)
>>    		return ret;
>>    
>> -	v4l2_fill_mbus_format(&format.format, &f->fmt.pix,
>> +	v4l2_fill_mbus_format(&format.format, pixfmt,
>>    			      current_fmt->mbus_code);
>>    	ret = v4l2_subdev_call(dcmi->entity.subdev, pad,
>>    			       set_fmt, NULL, &format);
>>    	if (ret < 0)
>>    		return ret;
>>    
>> +	/* Enable crop if sensor resolution is larger than request */
>> +	dcmi->do_crop = false;
>> +	if ((mf->width > pixfmt->width) || (mf->height > pixfmt->height)) {
>> +		dcmi->crop.width = pixfmt->width;
>> +		dcmi->crop.height = pixfmt->height;
>> +		dcmi->crop.left = (mf->width - pixfmt->width) / 2;
>> +		dcmi->crop.top = (mf->height - pixfmt->height) / 2;
>> +		dcmi->do_crop = true;
> 
> Why not implement the selection API instead? I assume that you can crop from any
> region of the sensor, not just the center part.

The point here was to add some flexibility for user in term of 
resolution and also less memory consumption.
For example here I want to make a 480x272 preview:
- without this change: S_FMT(480x272) returns VGA (the OV9655 larger 
discrete resolution), then app has to capture VGA frames then crop to 
fit 480x272 frame buffer.
- with this change: S_FMT(480x272) returns 480x272 (crop done by 
hardware), app can directly capture 480x272 then copy to framebuffer 
without any conversion.

Implementation of V4L2 crop using SELECTION API could also be used,
but I need to change app.

More generally, with a given couple ISP+sensor, will S_FMT()
return the sensor only supported resolutions ? or the supported 
resolutions of the couple ISP+sensor (ISP will downscale/upscale/crop
the sensor discrete resolution to fit user request) ?

Hans, what are your recommendations ?

> 
> Regards,
> 
> 	Hans
> 
>> +
>> +		dev_dbg(dcmi->dev, "%ux%u cropped to %ux%u@(%u,%u)\n",
>> +			mf->width, mf->height,
>> +			dcmi->crop.width, dcmi->crop.height,
>> +			dcmi->crop.left, dcmi->crop.top);
>> +	};
>> +
>>    	dcmi->fmt = *f;
>>    	dcmi->current_fmt = current_fmt;
>>    
>>
> 

Re: [PATCH v1 3/5] [media] stm32-dcmi: crop sensor image to match user resolution

[Hugues FRUCHET]

Hi Hans, thanks for review.

Reply below.

BR
Hugues.

On 06/22/2017 05:19 PM, Hans Verkuil wrote:
> On 06/22/2017 05:12 PM, Hugues Fruchet wrote:
>> Add flexibility on supported resolutions by cropping sensor
>> image to fit user resolution format request.
>>
>> Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
>> ---
>>    drivers/media/platform/stm32/stm32-dcmi.c | 54 ++++++++++++++++++++++++++++++-
>>    1 file changed, 53 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/media/platform/stm32/stm32-dcmi.c b/drivers/media/platform/stm32/stm32-dcmi.c
>> index 75d53aa..bc5e052 100644
>> --- a/drivers/media/platform/stm32/stm32-dcmi.c
>> +++ b/drivers/media/platform/stm32/stm32-dcmi.c
>> @@ -131,6 +131,8 @@ struct stm32_dcmi {
>>    	struct v4l2_async_notifier	notifier;
>>    	struct dcmi_graph_entity	entity;
>>    	struct v4l2_format		fmt;
>> +	struct v4l2_rect		crop;
>> +	bool				do_crop;
>>    
>>    	const struct dcmi_format	**user_formats;
>>    	unsigned int			num_user_formats;
>> @@ -538,6 +540,27 @@ static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count)
>>    	if (dcmi->bus.flags & V4L2_MBUS_PCLK_SAMPLE_RISING)
>>    		val |= CR_PCKPOL;
>>    
>> +	if (dcmi->do_crop) {
>> +		u32 size, start;
>> +
>> +		/* Crop resolution */
>> +		size = ((dcmi->crop.height - 1) << 16) |
>> +			((dcmi->crop.width << 1) - 1);
>> +		reg_write(dcmi->regs, DCMI_CWSIZE, size);
>> +
>> +		/* Crop start point */
>> +		start = ((dcmi->crop.top) << 16) |
>> +			 ((dcmi->crop.left << 1));
>> +		reg_write(dcmi->regs, DCMI_CWSTRT, start);
>> +
>> +		dev_dbg(dcmi->dev, "Cropping to %ux%u@%u:%u\n",
>> +			dcmi->crop.width, dcmi->crop.height,
>> +			dcmi->crop.left, dcmi->crop.top);
>> +
>> +		/* Enable crop */
>> +		val |= CR_CROP;
>> +	};
>> +
>>    	reg_write(dcmi->regs, DCMI_CR, val);
>>    
>>    	/* Enable dcmi */
>> @@ -707,6 +730,8 @@ static int dcmi_try_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f,
>>    		.which = V4L2_SUBDEV_FORMAT_TRY,
>>    	};
>>    	int ret;
>> +	__u32 width, height;
>> +	struct v4l2_mbus_framefmt *mf = &format.format;
>>    
>>    	dcmi_fmt = find_format_by_fourcc(dcmi, pixfmt->pixelformat);
>>    	if (!dcmi_fmt) {
>> @@ -724,8 +749,18 @@ static int dcmi_try_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f,
>>    	if (ret < 0)
>>    		return ret;
>>    
>> +	/* Align format on what sensor can do */
>> +	width = pixfmt->width;
>> +	height = pixfmt->height;
>>    	v4l2_fill_pix_format(pixfmt, &format.format);
>>    
>> +	/* We can do any resolution thanks to crop */
>> +	if ((mf->width > width) || (mf->height > height)) {
>> +		/* Restore width/height */
>> +		pixfmt->width = width;
>> +		pixfmt->height = height;
>> +	};
>> +
>>    	pixfmt->field = V4L2_FIELD_NONE;
>>    	pixfmt->bytesperline = pixfmt->width * dcmi_fmt->bpp;
>>    	pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height;
>> @@ -741,6 +776,8 @@ static int dcmi_set_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f)
>>    	struct v4l2_subdev_format format = {
>>    		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
>>    	};
>> +	struct v4l2_mbus_framefmt *mf = &format.format;
>> +	struct v4l2_pix_format *pixfmt = &f->fmt.pix;
>>    	const struct dcmi_format *current_fmt;
>>    	int ret;
>>    
>> @@ -748,13 +785,28 @@ static int dcmi_set_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f)
>>    	if (ret)
>>    		return ret;
>>    
>> -	v4l2_fill_mbus_format(&format.format, &f->fmt.pix,
>> +	v4l2_fill_mbus_format(&format.format, pixfmt,
>>    			      current_fmt->mbus_code);
>>    	ret = v4l2_subdev_call(dcmi->entity.subdev, pad,
>>    			       set_fmt, NULL, &format);
>>    	if (ret < 0)
>>    		return ret;
>>    
>> +	/* Enable crop if sensor resolution is larger than request */
>> +	dcmi->do_crop = false;
>> +	if ((mf->width > pixfmt->width) || (mf->height > pixfmt->height)) {
>> +		dcmi->crop.width = pixfmt->width;
>> +		dcmi->crop.height = pixfmt->height;
>> +		dcmi->crop.left = (mf->width - pixfmt->width) / 2;
>> +		dcmi->crop.top = (mf->height - pixfmt->height) / 2;
>> +		dcmi->do_crop = true;
> 
> Why not implement the selection API instead? I assume that you can crop from any
> region of the sensor, not just the center part.

The point here was to add some flexibility for user in term of 
resolution and also less memory consumption.
For example here I want to make a 480x272 preview:
- without this change: S_FMT(480x272) returns VGA (the OV9655 larger 
discrete resolution), then app has to capture VGA frames then crop to 
fit 480x272 frame buffer.
- with this change: S_FMT(480x272) returns 480x272 (crop done by 
hardware), app can directly capture 480x272 then copy to framebuffer 
without any conversion.

Implementation of V4L2 crop using SELECTION API could also be used,
but I need to change app.

More generally, with a given couple ISP+sensor, will S_FMT()
return the sensor only supported resolutions ? or the supported 
resolutions of the couple ISP+sensor (ISP will downscale/upscale/crop
the sensor discrete resolution to fit user request) ?

Hans, what are your recommendations ?

> 
> Regards,
> 
> 	Hans
> 
>> +
>> +		dev_dbg(dcmi->dev, "%ux%u cropped to %ux%u@(%u,%u)\n",
>> +			mf->width, mf->height,
>> +			dcmi->crop.width, dcmi->crop.height,
>> +			dcmi->crop.left, dcmi->crop.top);
>> +	};
>> +
>>    	dcmi->fmt = *f;
>>    	dcmi->current_fmt = current_fmt;
>>    
>>
> 

Re: [PATCH v1 3/5] [media] stm32-dcmi: crop sensor image to match user resolution

[Hans Verkuil]

On 26/06/17 11:53, Hugues FRUCHET wrote:
> Hi Hans, thanks for review.
> 
> Reply below.
> 
> BR
> Hugues.
> 
> On 06/22/2017 05:19 PM, Hans Verkuil wrote:
>> On 06/22/2017 05:12 PM, Hugues Fruchet wrote:
>>> Add flexibility on supported resolutions by cropping sensor
>>> image to fit user resolution format request.
>>>
>>> Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
>>> ---
>>>    drivers/media/platform/stm32/stm32-dcmi.c | 54 ++++++++++++++++++++++++++++++-
>>>    1 file changed, 53 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/media/platform/stm32/stm32-dcmi.c b/drivers/media/platform/stm32/stm32-dcmi.c
>>> index 75d53aa..bc5e052 100644
>>> --- a/drivers/media/platform/stm32/stm32-dcmi.c
>>> +++ b/drivers/media/platform/stm32/stm32-dcmi.c
>>> @@ -131,6 +131,8 @@ struct stm32_dcmi {
>>>    	struct v4l2_async_notifier	notifier;
>>>    	struct dcmi_graph_entity	entity;
>>>    	struct v4l2_format		fmt;
>>> +	struct v4l2_rect		crop;
>>> +	bool				do_crop;
>>>    
>>>    	const struct dcmi_format	**user_formats;
>>>    	unsigned int			num_user_formats;
>>> @@ -538,6 +540,27 @@ static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count)
>>>    	if (dcmi->bus.flags & V4L2_MBUS_PCLK_SAMPLE_RISING)
>>>    		val |= CR_PCKPOL;
>>>    
>>> +	if (dcmi->do_crop) {
>>> +		u32 size, start;
>>> +
>>> +		/* Crop resolution */
>>> +		size = ((dcmi->crop.height - 1) << 16) |
>>> +			((dcmi->crop.width << 1) - 1);
>>> +		reg_write(dcmi->regs, DCMI_CWSIZE, size);
>>> +
>>> +		/* Crop start point */
>>> +		start = ((dcmi->crop.top) << 16) |
>>> +			 ((dcmi->crop.left << 1));
>>> +		reg_write(dcmi->regs, DCMI_CWSTRT, start);
>>> +
>>> +		dev_dbg(dcmi->dev, "Cropping to %ux%u@%u:%u\n",
>>> +			dcmi->crop.width, dcmi->crop.height,
>>> +			dcmi->crop.left, dcmi->crop.top);
>>> +
>>> +		/* Enable crop */
>>> +		val |= CR_CROP;
>>> +	};
>>> +
>>>    	reg_write(dcmi->regs, DCMI_CR, val);
>>>    
>>>    	/* Enable dcmi */
>>> @@ -707,6 +730,8 @@ static int dcmi_try_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f,
>>>    		.which = V4L2_SUBDEV_FORMAT_TRY,
>>>    	};
>>>    	int ret;
>>> +	__u32 width, height;
>>> +	struct v4l2_mbus_framefmt *mf = &format.format;
>>>    
>>>    	dcmi_fmt = find_format_by_fourcc(dcmi, pixfmt->pixelformat);
>>>    	if (!dcmi_fmt) {
>>> @@ -724,8 +749,18 @@ static int dcmi_try_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f,
>>>    	if (ret < 0)
>>>    		return ret;
>>>    
>>> +	/* Align format on what sensor can do */
>>> +	width = pixfmt->width;
>>> +	height = pixfmt->height;
>>>    	v4l2_fill_pix_format(pixfmt, &format.format);
>>>    
>>> +	/* We can do any resolution thanks to crop */
>>> +	if ((mf->width > width) || (mf->height > height)) {
>>> +		/* Restore width/height */
>>> +		pixfmt->width = width;
>>> +		pixfmt->height = height;
>>> +	};
>>> +
>>>    	pixfmt->field = V4L2_FIELD_NONE;
>>>    	pixfmt->bytesperline = pixfmt->width * dcmi_fmt->bpp;
>>>    	pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height;
>>> @@ -741,6 +776,8 @@ static int dcmi_set_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f)
>>>    	struct v4l2_subdev_format format = {
>>>    		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
>>>    	};
>>> +	struct v4l2_mbus_framefmt *mf = &format.format;
>>> +	struct v4l2_pix_format *pixfmt = &f->fmt.pix;
>>>    	const struct dcmi_format *current_fmt;
>>>    	int ret;
>>>    
>>> @@ -748,13 +785,28 @@ static int dcmi_set_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f)
>>>    	if (ret)
>>>    		return ret;
>>>    
>>> -	v4l2_fill_mbus_format(&format.format, &f->fmt.pix,
>>> +	v4l2_fill_mbus_format(&format.format, pixfmt,
>>>    			      current_fmt->mbus_code);
>>>    	ret = v4l2_subdev_call(dcmi->entity.subdev, pad,
>>>    			       set_fmt, NULL, &format);
>>>    	if (ret < 0)
>>>    		return ret;
>>>    
>>> +	/* Enable crop if sensor resolution is larger than request */
>>> +	dcmi->do_crop = false;
>>> +	if ((mf->width > pixfmt->width) || (mf->height > pixfmt->height)) {
>>> +		dcmi->crop.width = pixfmt->width;
>>> +		dcmi->crop.height = pixfmt->height;
>>> +		dcmi->crop.left = (mf->width - pixfmt->width) / 2;
>>> +		dcmi->crop.top = (mf->height - pixfmt->height) / 2;
>>> +		dcmi->do_crop = true;
>>
>> Why not implement the selection API instead? I assume that you can crop from any
>> region of the sensor, not just the center part.
> 
> The point here was to add some flexibility for user in term of 
> resolution and also less memory consumption.
> For example here I want to make a 480x272 preview:
> - without this change: S_FMT(480x272) returns VGA (the OV9655 larger 
> discrete resolution), then app has to capture VGA frames then crop to 
> fit 480x272 frame buffer.
> - with this change: S_FMT(480x272) returns 480x272 (crop done by 
> hardware), app can directly capture 480x272 then copy to framebuffer 
> without any conversion.
> 
> Implementation of V4L2 crop using SELECTION API could also be used,
> but I need to change app.
> 
> More generally, with a given couple ISP+sensor, will S_FMT()
> return the sensor only supported resolutions ? or the supported 
> resolutions of the couple ISP+sensor (ISP will downscale/upscale/crop
> the sensor discrete resolution to fit user request) ?
> 
> Hans, what are your recommendations ?

This is not the way the V4L2 API works.

Sensors report their supported resolutions through the ENUM_FRAMESIZES
(and the related ENUM_FRAMEINTERVALS) ioctls.

With S_FMT you pick the resolution you want.

If you then want to crop the driver should implement the selection API
(this will also automatically enable the G/S_CROP/CROPCAP ioctls) so the
application can select which part of the image should be cropped. Assuming
there is no scaler then after cropping the format size will be reduced
to the size of the cropped image.

That's in a nutshell how these ioctls relate to one another.

Regards,

	Hans

> 
>>
>> Regards,
>>
>> 	Hans
>>
>>> +
>>> +		dev_dbg(dcmi->dev, "%ux%u cropped to %ux%u@(%u,%u)\n",
>>> +			mf->width, mf->height,
>>> +			dcmi->crop.width, dcmi->crop.height,
>>> +			dcmi->crop.left, dcmi->crop.top);
>>> +	};
>>> +
>>>    	dcmi->fmt = *f;
>>>    	dcmi->current_fmt = current_fmt;
>>>    
>>>

[PATCH v1 3/5] [media] stm32-dcmi: crop sensor image to match user resolution

[Hans Verkuil]

On 26/06/17 11:53, Hugues FRUCHET wrote:
> Hi Hans, thanks for review.
> 
> Reply below.
> 
> BR
> Hugues.
> 
> On 06/22/2017 05:19 PM, Hans Verkuil wrote:
>> On 06/22/2017 05:12 PM, Hugues Fruchet wrote:
>>> Add flexibility on supported resolutions by cropping sensor
>>> image to fit user resolution format request.
>>>
>>> Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
>>> ---
>>>    drivers/media/platform/stm32/stm32-dcmi.c | 54 ++++++++++++++++++++++++++++++-
>>>    1 file changed, 53 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/media/platform/stm32/stm32-dcmi.c b/drivers/media/platform/stm32/stm32-dcmi.c
>>> index 75d53aa..bc5e052 100644
>>> --- a/drivers/media/platform/stm32/stm32-dcmi.c
>>> +++ b/drivers/media/platform/stm32/stm32-dcmi.c
>>> @@ -131,6 +131,8 @@ struct stm32_dcmi {
>>>    	struct v4l2_async_notifier	notifier;
>>>    	struct dcmi_graph_entity	entity;
>>>    	struct v4l2_format		fmt;
>>> +	struct v4l2_rect		crop;
>>> +	bool				do_crop;
>>>    
>>>    	const struct dcmi_format	**user_formats;
>>>    	unsigned int			num_user_formats;
>>> @@ -538,6 +540,27 @@ static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count)
>>>    	if (dcmi->bus.flags & V4L2_MBUS_PCLK_SAMPLE_RISING)
>>>    		val |= CR_PCKPOL;
>>>    
>>> +	if (dcmi->do_crop) {
>>> +		u32 size, start;
>>> +
>>> +		/* Crop resolution */
>>> +		size = ((dcmi->crop.height - 1) << 16) |
>>> +			((dcmi->crop.width << 1) - 1);
>>> +		reg_write(dcmi->regs, DCMI_CWSIZE, size);
>>> +
>>> +		/* Crop start point */
>>> +		start = ((dcmi->crop.top) << 16) |
>>> +			 ((dcmi->crop.left << 1));
>>> +		reg_write(dcmi->regs, DCMI_CWSTRT, start);
>>> +
>>> +		dev_dbg(dcmi->dev, "Cropping to %ux%u@%u:%u\n",
>>> +			dcmi->crop.width, dcmi->crop.height,
>>> +			dcmi->crop.left, dcmi->crop.top);
>>> +
>>> +		/* Enable crop */
>>> +		val |= CR_CROP;
>>> +	};
>>> +
>>>    	reg_write(dcmi->regs, DCMI_CR, val);
>>>    
>>>    	/* Enable dcmi */
>>> @@ -707,6 +730,8 @@ static int dcmi_try_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f,
>>>    		.which = V4L2_SUBDEV_FORMAT_TRY,
>>>    	};
>>>    	int ret;
>>> +	__u32 width, height;
>>> +	struct v4l2_mbus_framefmt *mf = &format.format;
>>>    
>>>    	dcmi_fmt = find_format_by_fourcc(dcmi, pixfmt->pixelformat);
>>>    	if (!dcmi_fmt) {
>>> @@ -724,8 +749,18 @@ static int dcmi_try_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f,
>>>    	if (ret < 0)
>>>    		return ret;
>>>    
>>> +	/* Align format on what sensor can do */
>>> +	width = pixfmt->width;
>>> +	height = pixfmt->height;
>>>    	v4l2_fill_pix_format(pixfmt, &format.format);
>>>    
>>> +	/* We can do any resolution thanks to crop */
>>> +	if ((mf->width > width) || (mf->height > height)) {
>>> +		/* Restore width/height */
>>> +		pixfmt->width = width;
>>> +		pixfmt->height = height;
>>> +	};
>>> +
>>>    	pixfmt->field = V4L2_FIELD_NONE;
>>>    	pixfmt->bytesperline = pixfmt->width * dcmi_fmt->bpp;
>>>    	pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height;
>>> @@ -741,6 +776,8 @@ static int dcmi_set_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f)
>>>    	struct v4l2_subdev_format format = {
>>>    		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
>>>    	};
>>> +	struct v4l2_mbus_framefmt *mf = &format.format;
>>> +	struct v4l2_pix_format *pixfmt = &f->fmt.pix;
>>>    	const struct dcmi_format *current_fmt;
>>>    	int ret;
>>>    
>>> @@ -748,13 +785,28 @@ static int dcmi_set_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f)
>>>    	if (ret)
>>>    		return ret;
>>>    
>>> -	v4l2_fill_mbus_format(&format.format, &f->fmt.pix,
>>> +	v4l2_fill_mbus_format(&format.format, pixfmt,
>>>    			      current_fmt->mbus_code);
>>>    	ret = v4l2_subdev_call(dcmi->entity.subdev, pad,
>>>    			       set_fmt, NULL, &format);
>>>    	if (ret < 0)
>>>    		return ret;
>>>    
>>> +	/* Enable crop if sensor resolution is larger than request */
>>> +	dcmi->do_crop = false;
>>> +	if ((mf->width > pixfmt->width) || (mf->height > pixfmt->height)) {
>>> +		dcmi->crop.width = pixfmt->width;
>>> +		dcmi->crop.height = pixfmt->height;
>>> +		dcmi->crop.left = (mf->width - pixfmt->width) / 2;
>>> +		dcmi->crop.top = (mf->height - pixfmt->height) / 2;
>>> +		dcmi->do_crop = true;
>>
>> Why not implement the selection API instead? I assume that you can crop from any
>> region of the sensor, not just the center part.
> 
> The point here was to add some flexibility for user in term of 
> resolution and also less memory consumption.
> For example here I want to make a 480x272 preview:
> - without this change: S_FMT(480x272) returns VGA (the OV9655 larger 
> discrete resolution), then app has to capture VGA frames then crop to 
> fit 480x272 frame buffer.
> - with this change: S_FMT(480x272) returns 480x272 (crop done by 
> hardware), app can directly capture 480x272 then copy to framebuffer 
> without any conversion.
> 
> Implementation of V4L2 crop using SELECTION API could also be used,
> but I need to change app.
> 
> More generally, with a given couple ISP+sensor, will S_FMT()
> return the sensor only supported resolutions ? or the supported 
> resolutions of the couple ISP+sensor (ISP will downscale/upscale/crop
> the sensor discrete resolution to fit user request) ?
> 
> Hans, what are your recommendations ?

This is not the way the V4L2 API works.

Sensors report their supported resolutions through the ENUM_FRAMESIZES
(and the related ENUM_FRAMEINTERVALS) ioctls.

With S_FMT you pick the resolution you want.

If you then want to crop the driver should implement the selection API
(this will also automatically enable the G/S_CROP/CROPCAP ioctls) so the
application can select which part of the image should be cropped. Assuming
there is no scaler then after cropping the format size will be reduced
to the size of the cropped image.

That's in a nutshell how these ioctls relate to one another.

Regards,

	Hans

> 
>>
>> Regards,
>>
>> 	Hans
>>
>>> +
>>> +		dev_dbg(dcmi->dev, "%ux%u cropped to %ux%u@(%u,%u)\n",
>>> +			mf->width, mf->height,
>>> +			dcmi->crop.width, dcmi->crop.height,
>>> +			dcmi->crop.left, dcmi->crop.top);
>>> +	};
>>> +
>>>    	dcmi->fmt = *f;
>>>    	dcmi->current_fmt = current_fmt;
>>>    
>>>

Re: [PATCH v1 3/5] [media] stm32-dcmi: crop sensor image to match user resolution

[Hans Verkuil]

On 26/06/17 11:53, Hugues FRUCHET wrote:
> Hi Hans, thanks for review.
> 
> Reply below.
> 
> BR
> Hugues.
> 
> On 06/22/2017 05:19 PM, Hans Verkuil wrote:
>> On 06/22/2017 05:12 PM, Hugues Fruchet wrote:
>>> Add flexibility on supported resolutions by cropping sensor
>>> image to fit user resolution format request.
>>>
>>> Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
>>> ---
>>>    drivers/media/platform/stm32/stm32-dcmi.c | 54 ++++++++++++++++++++++++++++++-
>>>    1 file changed, 53 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/media/platform/stm32/stm32-dcmi.c b/drivers/media/platform/stm32/stm32-dcmi.c
>>> index 75d53aa..bc5e052 100644
>>> --- a/drivers/media/platform/stm32/stm32-dcmi.c
>>> +++ b/drivers/media/platform/stm32/stm32-dcmi.c
>>> @@ -131,6 +131,8 @@ struct stm32_dcmi {
>>>    	struct v4l2_async_notifier	notifier;
>>>    	struct dcmi_graph_entity	entity;
>>>    	struct v4l2_format		fmt;
>>> +	struct v4l2_rect		crop;
>>> +	bool				do_crop;
>>>    
>>>    	const struct dcmi_format	**user_formats;
>>>    	unsigned int			num_user_formats;
>>> @@ -538,6 +540,27 @@ static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count)
>>>    	if (dcmi->bus.flags & V4L2_MBUS_PCLK_SAMPLE_RISING)
>>>    		val |= CR_PCKPOL;
>>>    
>>> +	if (dcmi->do_crop) {
>>> +		u32 size, start;
>>> +
>>> +		/* Crop resolution */
>>> +		size = ((dcmi->crop.height - 1) << 16) |
>>> +			((dcmi->crop.width << 1) - 1);
>>> +		reg_write(dcmi->regs, DCMI_CWSIZE, size);
>>> +
>>> +		/* Crop start point */
>>> +		start = ((dcmi->crop.top) << 16) |
>>> +			 ((dcmi->crop.left << 1));
>>> +		reg_write(dcmi->regs, DCMI_CWSTRT, start);
>>> +
>>> +		dev_dbg(dcmi->dev, "Cropping to %ux%u@%u:%u\n",
>>> +			dcmi->crop.width, dcmi->crop.height,
>>> +			dcmi->crop.left, dcmi->crop.top);
>>> +
>>> +		/* Enable crop */
>>> +		val |= CR_CROP;
>>> +	};
>>> +
>>>    	reg_write(dcmi->regs, DCMI_CR, val);
>>>    
>>>    	/* Enable dcmi */
>>> @@ -707,6 +730,8 @@ static int dcmi_try_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f,
>>>    		.which = V4L2_SUBDEV_FORMAT_TRY,
>>>    	};
>>>    	int ret;
>>> +	__u32 width, height;
>>> +	struct v4l2_mbus_framefmt *mf = &format.format;
>>>    
>>>    	dcmi_fmt = find_format_by_fourcc(dcmi, pixfmt->pixelformat);
>>>    	if (!dcmi_fmt) {
>>> @@ -724,8 +749,18 @@ static int dcmi_try_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f,
>>>    	if (ret < 0)
>>>    		return ret;
>>>    
>>> +	/* Align format on what sensor can do */
>>> +	width = pixfmt->width;
>>> +	height = pixfmt->height;
>>>    	v4l2_fill_pix_format(pixfmt, &format.format);
>>>    
>>> +	/* We can do any resolution thanks to crop */
>>> +	if ((mf->width > width) || (mf->height > height)) {
>>> +		/* Restore width/height */
>>> +		pixfmt->width = width;
>>> +		pixfmt->height = height;
>>> +	};
>>> +
>>>    	pixfmt->field = V4L2_FIELD_NONE;
>>>    	pixfmt->bytesperline = pixfmt->width * dcmi_fmt->bpp;
>>>    	pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height;
>>> @@ -741,6 +776,8 @@ static int dcmi_set_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f)
>>>    	struct v4l2_subdev_format format = {
>>>    		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
>>>    	};
>>> +	struct v4l2_mbus_framefmt *mf = &format.format;
>>> +	struct v4l2_pix_format *pixfmt = &f->fmt.pix;
>>>    	const struct dcmi_format *current_fmt;
>>>    	int ret;
>>>    
>>> @@ -748,13 +785,28 @@ static int dcmi_set_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f)
>>>    	if (ret)
>>>    		return ret;
>>>    
>>> -	v4l2_fill_mbus_format(&format.format, &f->fmt.pix,
>>> +	v4l2_fill_mbus_format(&format.format, pixfmt,
>>>    			      current_fmt->mbus_code);
>>>    	ret = v4l2_subdev_call(dcmi->entity.subdev, pad,
>>>    			       set_fmt, NULL, &format);
>>>    	if (ret < 0)
>>>    		return ret;
>>>    
>>> +	/* Enable crop if sensor resolution is larger than request */
>>> +	dcmi->do_crop = false;
>>> +	if ((mf->width > pixfmt->width) || (mf->height > pixfmt->height)) {
>>> +		dcmi->crop.width = pixfmt->width;
>>> +		dcmi->crop.height = pixfmt->height;
>>> +		dcmi->crop.left = (mf->width - pixfmt->width) / 2;
>>> +		dcmi->crop.top = (mf->height - pixfmt->height) / 2;
>>> +		dcmi->do_crop = true;
>>
>> Why not implement the selection API instead? I assume that you can crop from any
>> region of the sensor, not just the center part.
> 
> The point here was to add some flexibility for user in term of 
> resolution and also less memory consumption.
> For example here I want to make a 480x272 preview:
> - without this change: S_FMT(480x272) returns VGA (the OV9655 larger 
> discrete resolution), then app has to capture VGA frames then crop to 
> fit 480x272 frame buffer.
> - with this change: S_FMT(480x272) returns 480x272 (crop done by 
> hardware), app can directly capture 480x272 then copy to framebuffer 
> without any conversion.
> 
> Implementation of V4L2 crop using SELECTION API could also be used,
> but I need to change app.
> 
> More generally, with a given couple ISP+sensor, will S_FMT()
> return the sensor only supported resolutions ? or the supported 
> resolutions of the couple ISP+sensor (ISP will downscale/upscale/crop
> the sensor discrete resolution to fit user request) ?
> 
> Hans, what are your recommendations ?

This is not the way the V4L2 API works.

Sensors report their supported resolutions through the ENUM_FRAMESIZES
(and the related ENUM_FRAMEINTERVALS) ioctls.

With S_FMT you pick the resolution you want.

If you then want to crop the driver should implement the selection API
(this will also automatically enable the G/S_CROP/CROPCAP ioctls) so the
application can select which part of the image should be cropped. Assuming
there is no scaler then after cropping the format size will be reduced
to the size of the cropped image.

That's in a nutshell how these ioctls relate to one another.

Regards,

	Hans

> 
>>
>> Regards,
>>
>> 	Hans
>>
>>> +
>>> +		dev_dbg(dcmi->dev, "%ux%u cropped to %ux%u@(%u,%u)\n",
>>> +			mf->width, mf->height,
>>> +			dcmi->crop.width, dcmi->crop.height,
>>> +			dcmi->crop.left, dcmi->crop.top);
>>> +	};
>>> +
>>>    	dcmi->fmt = *f;
>>>    	dcmi->current_fmt = current_fmt;
>>>    
>>>

Re: [PATCH v1 3/5] [media] stm32-dcmi: crop sensor image to match user resolution

[Hugues FRUCHET]

On 06/26/2017 12:07 PM, Hans Verkuil wrote:
> On 26/06/17 11:53, Hugues FRUCHET wrote:
>> Hi Hans, thanks for review.
>>
>> Reply below.
>>
>> BR
>> Hugues.
>>
>> On 06/22/2017 05:19 PM, Hans Verkuil wrote:
>>> On 06/22/2017 05:12 PM, Hugues Fruchet wrote:
>>>> Add flexibility on supported resolutions by cropping sensor
>>>> image to fit user resolution format request.
>>>>
>>>> Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
>>>> ---
>>>>     drivers/media/platform/stm32/stm32-dcmi.c | 54 ++++++++++++++++++++++++++++++-
>>>>     1 file changed, 53 insertions(+), 1 deletion(-)
>>>>
>>>> diff --git a/drivers/media/platform/stm32/stm32-dcmi.c b/drivers/media/platform/stm32/stm32-dcmi.c
>>>> index 75d53aa..bc5e052 100644
>>>> --- a/drivers/media/platform/stm32/stm32-dcmi.c
>>>> +++ b/drivers/media/platform/stm32/stm32-dcmi.c
>>>> @@ -131,6 +131,8 @@ struct stm32_dcmi {
>>>>     	struct v4l2_async_notifier	notifier;
>>>>     	struct dcmi_graph_entity	entity;
>>>>     	struct v4l2_format		fmt;
>>>> +	struct v4l2_rect		crop;
>>>> +	bool				do_crop;
>>>>     
>>>>     	const struct dcmi_format	**user_formats;
>>>>     	unsigned int			num_user_formats;
>>>> @@ -538,6 +540,27 @@ static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count)
>>>>     	if (dcmi->bus.flags & V4L2_MBUS_PCLK_SAMPLE_RISING)
>>>>     		val |= CR_PCKPOL;
>>>>     
>>>> +	if (dcmi->do_crop) {
>>>> +		u32 size, start;
>>>> +
>>>> +		/* Crop resolution */
>>>> +		size = ((dcmi->crop.height - 1) << 16) |
>>>> +			((dcmi->crop.width << 1) - 1);
>>>> +		reg_write(dcmi->regs, DCMI_CWSIZE, size);
>>>> +
>>>> +		/* Crop start point */
>>>> +		start = ((dcmi->crop.top) << 16) |
>>>> +			 ((dcmi->crop.left << 1));
>>>> +		reg_write(dcmi->regs, DCMI_CWSTRT, start);
>>>> +
>>>> +		dev_dbg(dcmi->dev, "Cropping to %ux%u@%u:%u\n",
>>>> +			dcmi->crop.width, dcmi->crop.height,
>>>> +			dcmi->crop.left, dcmi->crop.top);
>>>> +
>>>> +		/* Enable crop */
>>>> +		val |= CR_CROP;
>>>> +	};
>>>> +
>>>>     	reg_write(dcmi->regs, DCMI_CR, val);
>>>>     
>>>>     	/* Enable dcmi */
>>>> @@ -707,6 +730,8 @@ static int dcmi_try_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f,
>>>>     		.which = V4L2_SUBDEV_FORMAT_TRY,
>>>>     	};
>>>>     	int ret;
>>>> +	__u32 width, height;
>>>> +	struct v4l2_mbus_framefmt *mf = &format.format;
>>>>     
>>>>     	dcmi_fmt = find_format_by_fourcc(dcmi, pixfmt->pixelformat);
>>>>     	if (!dcmi_fmt) {
>>>> @@ -724,8 +749,18 @@ static int dcmi_try_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f,
>>>>     	if (ret < 0)
>>>>     		return ret;
>>>>     
>>>> +	/* Align format on what sensor can do */
>>>> +	width = pixfmt->width;
>>>> +	height = pixfmt->height;
>>>>     	v4l2_fill_pix_format(pixfmt, &format.format);
>>>>     
>>>> +	/* We can do any resolution thanks to crop */
>>>> +	if ((mf->width > width) || (mf->height > height)) {
>>>> +		/* Restore width/height */
>>>> +		pixfmt->width = width;
>>>> +		pixfmt->height = height;
>>>> +	};
>>>> +
>>>>     	pixfmt->field = V4L2_FIELD_NONE;
>>>>     	pixfmt->bytesperline = pixfmt->width * dcmi_fmt->bpp;
>>>>     	pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height;
>>>> @@ -741,6 +776,8 @@ static int dcmi_set_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f)
>>>>     	struct v4l2_subdev_format format = {
>>>>     		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
>>>>     	};
>>>> +	struct v4l2_mbus_framefmt *mf = &format.format;
>>>> +	struct v4l2_pix_format *pixfmt = &f->fmt.pix;
>>>>     	const struct dcmi_format *current_fmt;
>>>>     	int ret;
>>>>     
>>>> @@ -748,13 +785,28 @@ static int dcmi_set_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f)
>>>>     	if (ret)
>>>>     		return ret;
>>>>     
>>>> -	v4l2_fill_mbus_format(&format.format, &f->fmt.pix,
>>>> +	v4l2_fill_mbus_format(&format.format, pixfmt,
>>>>     			      current_fmt->mbus_code);
>>>>     	ret = v4l2_subdev_call(dcmi->entity.subdev, pad,
>>>>     			       set_fmt, NULL, &format);
>>>>     	if (ret < 0)
>>>>     		return ret;
>>>>     
>>>> +	/* Enable crop if sensor resolution is larger than request */
>>>> +	dcmi->do_crop = false;
>>>> +	if ((mf->width > pixfmt->width) || (mf->height > pixfmt->height)) {
>>>> +		dcmi->crop.width = pixfmt->width;
>>>> +		dcmi->crop.height = pixfmt->height;
>>>> +		dcmi->crop.left = (mf->width - pixfmt->width) / 2;
>>>> +		dcmi->crop.top = (mf->height - pixfmt->height) / 2;
>>>> +		dcmi->do_crop = true;
>>>
>>> Why not implement the selection API instead? I assume that you can crop from any
>>> region of the sensor, not just the center part.
>>
>> The point here was to add some flexibility for user in term of
>> resolution and also less memory consumption.
>> For example here I want to make a 480x272 preview:
>> - without this change: S_FMT(480x272) returns VGA (the OV9655 larger
>> discrete resolution), then app has to capture VGA frames then crop to
>> fit 480x272 frame buffer.
>> - with this change: S_FMT(480x272) returns 480x272 (crop done by
>> hardware), app can directly capture 480x272 then copy to framebuffer
>> without any conversion.
>>
>> Implementation of V4L2 crop using SELECTION API could also be used,
>> but I need to change app.
>>
>> More generally, with a given couple ISP+sensor, will S_FMT()
>> return the sensor only supported resolutions ? or the supported
>> resolutions of the couple ISP+sensor (ISP will downscale/upscale/crop
>> the sensor discrete resolution to fit user request) ?
>>
>> Hans, what are your recommendations ?
> 
> This is not the way the V4L2 API works.
> 
> Sensors report their supported resolutions through the ENUM_FRAMESIZES
> (and the related ENUM_FRAMEINTERVALS) ioctls.
> 
> With S_FMT you pick the resolution you want.
> 
> If you then want to crop the driver should implement the selection API
> (this will also automatically enable the G/S_CROP/CROPCAP ioctls) so the
> application can select which part of the image should be cropped. Assuming
> there is no scaler then after cropping the format size will be reduced
> to the size of the cropped image.
> 
> That's in a nutshell how these ioctls relate to one another.
> 
> Regards,
> 
> 	Hans
> 

Ok, crystal clear, I'll implement selection API so.
BR,
Hugues.

>>
>>>
>>> Regards,
>>>
>>> 	Hans
>>>
>>>> +
>>>> +		dev_dbg(dcmi->dev, "%ux%u cropped to %ux%u@(%u,%u)\n",
>>>> +			mf->width, mf->height,
>>>> +			dcmi->crop.width, dcmi->crop.height,
>>>> +			dcmi->crop.left, dcmi->crop.top);
>>>> +	};
>>>> +
>>>>     	dcmi->fmt = *f;
>>>>     	dcmi->current_fmt = current_fmt;
>>>>     
>>>>
> 

[PATCH v1 3/5] [media] stm32-dcmi: crop sensor image to match user resolution

[Hugues FRUCHET]

On 06/26/2017 12:07 PM, Hans Verkuil wrote:
> On 26/06/17 11:53, Hugues FRUCHET wrote:
>> Hi Hans, thanks for review.
>>
>> Reply below.
>>
>> BR
>> Hugues.
>>
>> On 06/22/2017 05:19 PM, Hans Verkuil wrote:
>>> On 06/22/2017 05:12 PM, Hugues Fruchet wrote:
>>>> Add flexibility on supported resolutions by cropping sensor
>>>> image to fit user resolution format request.
>>>>
>>>> Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
>>>> ---
>>>>     drivers/media/platform/stm32/stm32-dcmi.c | 54 ++++++++++++++++++++++++++++++-
>>>>     1 file changed, 53 insertions(+), 1 deletion(-)
>>>>
>>>> diff --git a/drivers/media/platform/stm32/stm32-dcmi.c b/drivers/media/platform/stm32/stm32-dcmi.c
>>>> index 75d53aa..bc5e052 100644
>>>> --- a/drivers/media/platform/stm32/stm32-dcmi.c
>>>> +++ b/drivers/media/platform/stm32/stm32-dcmi.c
>>>> @@ -131,6 +131,8 @@ struct stm32_dcmi {
>>>>     	struct v4l2_async_notifier	notifier;
>>>>     	struct dcmi_graph_entity	entity;
>>>>     	struct v4l2_format		fmt;
>>>> +	struct v4l2_rect		crop;
>>>> +	bool				do_crop;
>>>>     
>>>>     	const struct dcmi_format	**user_formats;
>>>>     	unsigned int			num_user_formats;
>>>> @@ -538,6 +540,27 @@ static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count)
>>>>     	if (dcmi->bus.flags & V4L2_MBUS_PCLK_SAMPLE_RISING)
>>>>     		val |= CR_PCKPOL;
>>>>     
>>>> +	if (dcmi->do_crop) {
>>>> +		u32 size, start;
>>>> +
>>>> +		/* Crop resolution */
>>>> +		size = ((dcmi->crop.height - 1) << 16) |
>>>> +			((dcmi->crop.width << 1) - 1);
>>>> +		reg_write(dcmi->regs, DCMI_CWSIZE, size);
>>>> +
>>>> +		/* Crop start point */
>>>> +		start = ((dcmi->crop.top) << 16) |
>>>> +			 ((dcmi->crop.left << 1));
>>>> +		reg_write(dcmi->regs, DCMI_CWSTRT, start);
>>>> +
>>>> +		dev_dbg(dcmi->dev, "Cropping to %ux%u@%u:%u\n",
>>>> +			dcmi->crop.width, dcmi->crop.height,
>>>> +			dcmi->crop.left, dcmi->crop.top);
>>>> +
>>>> +		/* Enable crop */
>>>> +		val |= CR_CROP;
>>>> +	};
>>>> +
>>>>     	reg_write(dcmi->regs, DCMI_CR, val);
>>>>     
>>>>     	/* Enable dcmi */
>>>> @@ -707,6 +730,8 @@ static int dcmi_try_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f,
>>>>     		.which = V4L2_SUBDEV_FORMAT_TRY,
>>>>     	};
>>>>     	int ret;
>>>> +	__u32 width, height;
>>>> +	struct v4l2_mbus_framefmt *mf = &format.format;
>>>>     
>>>>     	dcmi_fmt = find_format_by_fourcc(dcmi, pixfmt->pixelformat);
>>>>     	if (!dcmi_fmt) {
>>>> @@ -724,8 +749,18 @@ static int dcmi_try_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f,
>>>>     	if (ret < 0)
>>>>     		return ret;
>>>>     
>>>> +	/* Align format on what sensor can do */
>>>> +	width = pixfmt->width;
>>>> +	height = pixfmt->height;
>>>>     	v4l2_fill_pix_format(pixfmt, &format.format);
>>>>     
>>>> +	/* We can do any resolution thanks to crop */
>>>> +	if ((mf->width > width) || (mf->height > height)) {
>>>> +		/* Restore width/height */
>>>> +		pixfmt->width = width;
>>>> +		pixfmt->height = height;
>>>> +	};
>>>> +
>>>>     	pixfmt->field = V4L2_FIELD_NONE;
>>>>     	pixfmt->bytesperline = pixfmt->width * dcmi_fmt->bpp;
>>>>     	pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height;
>>>> @@ -741,6 +776,8 @@ static int dcmi_set_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f)
>>>>     	struct v4l2_subdev_format format = {
>>>>     		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
>>>>     	};
>>>> +	struct v4l2_mbus_framefmt *mf = &format.format;
>>>> +	struct v4l2_pix_format *pixfmt = &f->fmt.pix;
>>>>     	const struct dcmi_format *current_fmt;
>>>>     	int ret;
>>>>     
>>>> @@ -748,13 +785,28 @@ static int dcmi_set_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f)
>>>>     	if (ret)
>>>>     		return ret;
>>>>     
>>>> -	v4l2_fill_mbus_format(&format.format, &f->fmt.pix,
>>>> +	v4l2_fill_mbus_format(&format.format, pixfmt,
>>>>     			      current_fmt->mbus_code);
>>>>     	ret = v4l2_subdev_call(dcmi->entity.subdev, pad,
>>>>     			       set_fmt, NULL, &format);
>>>>     	if (ret < 0)
>>>>     		return ret;
>>>>     
>>>> +	/* Enable crop if sensor resolution is larger than request */
>>>> +	dcmi->do_crop = false;
>>>> +	if ((mf->width > pixfmt->width) || (mf->height > pixfmt->height)) {
>>>> +		dcmi->crop.width = pixfmt->width;
>>>> +		dcmi->crop.height = pixfmt->height;
>>>> +		dcmi->crop.left = (mf->width - pixfmt->width) / 2;
>>>> +		dcmi->crop.top = (mf->height - pixfmt->height) / 2;
>>>> +		dcmi->do_crop = true;
>>>
>>> Why not implement the selection API instead? I assume that you can crop from any
>>> region of the sensor, not just the center part.
>>
>> The point here was to add some flexibility for user in term of
>> resolution and also less memory consumption.
>> For example here I want to make a 480x272 preview:
>> - without this change: S_FMT(480x272) returns VGA (the OV9655 larger
>> discrete resolution), then app has to capture VGA frames then crop to
>> fit 480x272 frame buffer.
>> - with this change: S_FMT(480x272) returns 480x272 (crop done by
>> hardware), app can directly capture 480x272 then copy to framebuffer
>> without any conversion.
>>
>> Implementation of V4L2 crop using SELECTION API could also be used,
>> but I need to change app.
>>
>> More generally, with a given couple ISP+sensor, will S_FMT()
>> return the sensor only supported resolutions ? or the supported
>> resolutions of the couple ISP+sensor (ISP will downscale/upscale/crop
>> the sensor discrete resolution to fit user request) ?
>>
>> Hans, what are your recommendations ?
> 
> This is not the way the V4L2 API works.
> 
> Sensors report their supported resolutions through the ENUM_FRAMESIZES
> (and the related ENUM_FRAMEINTERVALS) ioctls.
> 
> With S_FMT you pick the resolution you want.
> 
> If you then want to crop the driver should implement the selection API
> (this will also automatically enable the G/S_CROP/CROPCAP ioctls) so the
> application can select which part of the image should be cropped. Assuming
> there is no scaler then after cropping the format size will be reduced
> to the size of the cropped image.
> 
> That's in a nutshell how these ioctls relate to one another.
> 
> Regards,
> 
> 	Hans
> 

Ok, crystal clear, I'll implement selection API so.
BR,
Hugues.

>>
>>>
>>> Regards,
>>>
>>> 	Hans
>>>
>>>> +
>>>> +		dev_dbg(dcmi->dev, "%ux%u cropped to %ux%u@(%u,%u)\n",
>>>> +			mf->width, mf->height,
>>>> +			dcmi->crop.width, dcmi->crop.height,
>>>> +			dcmi->crop.left, dcmi->crop.top);
>>>> +	};
>>>> +
>>>>     	dcmi->fmt = *f;
>>>>     	dcmi->current_fmt = current_fmt;
>>>>     
>>>>
> 

Re: [PATCH v1 3/5] [media] stm32-dcmi: crop sensor image to match user resolution

[Hugues FRUCHET]

On 06/26/2017 12:07 PM, Hans Verkuil wrote:
> On 26/06/17 11:53, Hugues FRUCHET wrote:
>> Hi Hans, thanks for review.
>>
>> Reply below.
>>
>> BR
>> Hugues.
>>
>> On 06/22/2017 05:19 PM, Hans Verkuil wrote:
>>> On 06/22/2017 05:12 PM, Hugues Fruchet wrote:
>>>> Add flexibility on supported resolutions by cropping sensor
>>>> image to fit user resolution format request.
>>>>
>>>> Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
>>>> ---
>>>>     drivers/media/platform/stm32/stm32-dcmi.c | 54 ++++++++++++++++++++++++++++++-
>>>>     1 file changed, 53 insertions(+), 1 deletion(-)
>>>>
>>>> diff --git a/drivers/media/platform/stm32/stm32-dcmi.c b/drivers/media/platform/stm32/stm32-dcmi.c
>>>> index 75d53aa..bc5e052 100644
>>>> --- a/drivers/media/platform/stm32/stm32-dcmi.c
>>>> +++ b/drivers/media/platform/stm32/stm32-dcmi.c
>>>> @@ -131,6 +131,8 @@ struct stm32_dcmi {
>>>>     	struct v4l2_async_notifier	notifier;
>>>>     	struct dcmi_graph_entity	entity;
>>>>     	struct v4l2_format		fmt;
>>>> +	struct v4l2_rect		crop;
>>>> +	bool				do_crop;
>>>>     
>>>>     	const struct dcmi_format	**user_formats;
>>>>     	unsigned int			num_user_formats;
>>>> @@ -538,6 +540,27 @@ static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count)
>>>>     	if (dcmi->bus.flags & V4L2_MBUS_PCLK_SAMPLE_RISING)
>>>>     		val |= CR_PCKPOL;
>>>>     
>>>> +	if (dcmi->do_crop) {
>>>> +		u32 size, start;
>>>> +
>>>> +		/* Crop resolution */
>>>> +		size = ((dcmi->crop.height - 1) << 16) |
>>>> +			((dcmi->crop.width << 1) - 1);
>>>> +		reg_write(dcmi->regs, DCMI_CWSIZE, size);
>>>> +
>>>> +		/* Crop start point */
>>>> +		start = ((dcmi->crop.top) << 16) |
>>>> +			 ((dcmi->crop.left << 1));
>>>> +		reg_write(dcmi->regs, DCMI_CWSTRT, start);
>>>> +
>>>> +		dev_dbg(dcmi->dev, "Cropping to %ux%u@%u:%u\n",
>>>> +			dcmi->crop.width, dcmi->crop.height,
>>>> +			dcmi->crop.left, dcmi->crop.top);
>>>> +
>>>> +		/* Enable crop */
>>>> +		val |= CR_CROP;
>>>> +	};
>>>> +
>>>>     	reg_write(dcmi->regs, DCMI_CR, val);
>>>>     
>>>>     	/* Enable dcmi */
>>>> @@ -707,6 +730,8 @@ static int dcmi_try_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f,
>>>>     		.which = V4L2_SUBDEV_FORMAT_TRY,
>>>>     	};
>>>>     	int ret;
>>>> +	__u32 width, height;
>>>> +	struct v4l2_mbus_framefmt *mf = &format.format;
>>>>     
>>>>     	dcmi_fmt = find_format_by_fourcc(dcmi, pixfmt->pixelformat);
>>>>     	if (!dcmi_fmt) {
>>>> @@ -724,8 +749,18 @@ static int dcmi_try_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f,
>>>>     	if (ret < 0)
>>>>     		return ret;
>>>>     
>>>> +	/* Align format on what sensor can do */
>>>> +	width = pixfmt->width;
>>>> +	height = pixfmt->height;
>>>>     	v4l2_fill_pix_format(pixfmt, &format.format);
>>>>     
>>>> +	/* We can do any resolution thanks to crop */
>>>> +	if ((mf->width > width) || (mf->height > height)) {
>>>> +		/* Restore width/height */
>>>> +		pixfmt->width = width;
>>>> +		pixfmt->height = height;
>>>> +	};
>>>> +
>>>>     	pixfmt->field = V4L2_FIELD_NONE;
>>>>     	pixfmt->bytesperline = pixfmt->width * dcmi_fmt->bpp;
>>>>     	pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height;
>>>> @@ -741,6 +776,8 @@ static int dcmi_set_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f)
>>>>     	struct v4l2_subdev_format format = {
>>>>     		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
>>>>     	};
>>>> +	struct v4l2_mbus_framefmt *mf = &format.format;
>>>> +	struct v4l2_pix_format *pixfmt = &f->fmt.pix;
>>>>     	const struct dcmi_format *current_fmt;
>>>>     	int ret;
>>>>     
>>>> @@ -748,13 +785,28 @@ static int dcmi_set_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f)
>>>>     	if (ret)
>>>>     		return ret;
>>>>     
>>>> -	v4l2_fill_mbus_format(&format.format, &f->fmt.pix,
>>>> +	v4l2_fill_mbus_format(&format.format, pixfmt,
>>>>     			      current_fmt->mbus_code);
>>>>     	ret = v4l2_subdev_call(dcmi->entity.subdev, pad,
>>>>     			       set_fmt, NULL, &format);
>>>>     	if (ret < 0)
>>>>     		return ret;
>>>>     
>>>> +	/* Enable crop if sensor resolution is larger than request */
>>>> +	dcmi->do_crop = false;
>>>> +	if ((mf->width > pixfmt->width) || (mf->height > pixfmt->height)) {
>>>> +		dcmi->crop.width = pixfmt->width;
>>>> +		dcmi->crop.height = pixfmt->height;
>>>> +		dcmi->crop.left = (mf->width - pixfmt->width) / 2;
>>>> +		dcmi->crop.top = (mf->height - pixfmt->height) / 2;
>>>> +		dcmi->do_crop = true;
>>>
>>> Why not implement the selection API instead? I assume that you can crop from any
>>> region of the sensor, not just the center part.
>>
>> The point here was to add some flexibility for user in term of
>> resolution and also less memory consumption.
>> For example here I want to make a 480x272 preview:
>> - without this change: S_FMT(480x272) returns VGA (the OV9655 larger
>> discrete resolution), then app has to capture VGA frames then crop to
>> fit 480x272 frame buffer.
>> - with this change: S_FMT(480x272) returns 480x272 (crop done by
>> hardware), app can directly capture 480x272 then copy to framebuffer
>> without any conversion.
>>
>> Implementation of V4L2 crop using SELECTION API could also be used,
>> but I need to change app.
>>
>> More generally, with a given couple ISP+sensor, will S_FMT()
>> return the sensor only supported resolutions ? or the supported
>> resolutions of the couple ISP+sensor (ISP will downscale/upscale/crop
>> the sensor discrete resolution to fit user request) ?
>>
>> Hans, what are your recommendations ?
> 
> This is not the way the V4L2 API works.
> 
> Sensors report their supported resolutions through the ENUM_FRAMESIZES
> (and the related ENUM_FRAMEINTERVALS) ioctls.
> 
> With S_FMT you pick the resolution you want.
> 
> If you then want to crop the driver should implement the selection API
> (this will also automatically enable the G/S_CROP/CROPCAP ioctls) so the
> application can select which part of the image should be cropped. Assuming
> there is no scaler then after cropping the format size will be reduced
> to the size of the cropped image.
> 
> That's in a nutshell how these ioctls relate to one another.
> 
> Regards,
> 
> 	Hans
> 

Ok, crystal clear, I'll implement selection API so.
BR,
Hugues.

>>
>>>
>>> Regards,
>>>
>>> 	Hans
>>>
>>>> +
>>>> +		dev_dbg(dcmi->dev, "%ux%u cropped to %ux%u@(%u,%u)\n",
>>>> +			mf->width, mf->height,
>>>> +			dcmi->crop.width, dcmi->crop.height,
>>>> +			dcmi->crop.left, dcmi->crop.top);
>>>> +	};
>>>> +
>>>>     	dcmi->fmt = *f;
>>>>     	dcmi->current_fmt = current_fmt;
>>>>     
>>>>
> 

Re: [PATCH v1 3/5] [media] stm32-dcmi: crop sensor image to match user resolution

[Hugues FRUCHET]

On 06/26/2017 12:07 PM, Hans Verkuil wrote:
> On 26/06/17 11:53, Hugues FRUCHET wrote:
>> Hi Hans, thanks for review.
>>
>> Reply below.
>>
>> BR
>> Hugues.
>>
>> On 06/22/2017 05:19 PM, Hans Verkuil wrote:
>>> On 06/22/2017 05:12 PM, Hugues Fruchet wrote:
>>>> Add flexibility on supported resolutions by cropping sensor
>>>> image to fit user resolution format request.
>>>>
>>>> Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
>>>> ---
>>>>     drivers/media/platform/stm32/stm32-dcmi.c | 54 ++++++++++++++++++++++++++++++-
>>>>     1 file changed, 53 insertions(+), 1 deletion(-)
>>>>
>>>> diff --git a/drivers/media/platform/stm32/stm32-dcmi.c b/drivers/media/platform/stm32/stm32-dcmi.c
>>>> index 75d53aa..bc5e052 100644
>>>> --- a/drivers/media/platform/stm32/stm32-dcmi.c
>>>> +++ b/drivers/media/platform/stm32/stm32-dcmi.c
>>>> @@ -131,6 +131,8 @@ struct stm32_dcmi {
>>>>     	struct v4l2_async_notifier	notifier;
>>>>     	struct dcmi_graph_entity	entity;
>>>>     	struct v4l2_format		fmt;
>>>> +	struct v4l2_rect		crop;
>>>> +	bool				do_crop;
>>>>     
>>>>     	const struct dcmi_format	**user_formats;
>>>>     	unsigned int			num_user_formats;
>>>> @@ -538,6 +540,27 @@ static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count)
>>>>     	if (dcmi->bus.flags & V4L2_MBUS_PCLK_SAMPLE_RISING)
>>>>     		val |= CR_PCKPOL;
>>>>     
>>>> +	if (dcmi->do_crop) {
>>>> +		u32 size, start;
>>>> +
>>>> +		/* Crop resolution */
>>>> +		size = ((dcmi->crop.height - 1) << 16) |
>>>> +			((dcmi->crop.width << 1) - 1);
>>>> +		reg_write(dcmi->regs, DCMI_CWSIZE, size);
>>>> +
>>>> +		/* Crop start point */
>>>> +		start = ((dcmi->crop.top) << 16) |
>>>> +			 ((dcmi->crop.left << 1));
>>>> +		reg_write(dcmi->regs, DCMI_CWSTRT, start);
>>>> +
>>>> +		dev_dbg(dcmi->dev, "Cropping to %ux%u@%u:%u\n",
>>>> +			dcmi->crop.width, dcmi->crop.height,
>>>> +			dcmi->crop.left, dcmi->crop.top);
>>>> +
>>>> +		/* Enable crop */
>>>> +		val |= CR_CROP;
>>>> +	};
>>>> +
>>>>     	reg_write(dcmi->regs, DCMI_CR, val);
>>>>     
>>>>     	/* Enable dcmi */
>>>> @@ -707,6 +730,8 @@ static int dcmi_try_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f,
>>>>     		.which = V4L2_SUBDEV_FORMAT_TRY,
>>>>     	};
>>>>     	int ret;
>>>> +	__u32 width, height;
>>>> +	struct v4l2_mbus_framefmt *mf = &format.format;
>>>>     
>>>>     	dcmi_fmt = find_format_by_fourcc(dcmi, pixfmt->pixelformat);
>>>>     	if (!dcmi_fmt) {
>>>> @@ -724,8 +749,18 @@ static int dcmi_try_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f,
>>>>     	if (ret < 0)
>>>>     		return ret;
>>>>     
>>>> +	/* Align format on what sensor can do */
>>>> +	width = pixfmt->width;
>>>> +	height = pixfmt->height;
>>>>     	v4l2_fill_pix_format(pixfmt, &format.format);
>>>>     
>>>> +	/* We can do any resolution thanks to crop */
>>>> +	if ((mf->width > width) || (mf->height > height)) {
>>>> +		/* Restore width/height */
>>>> +		pixfmt->width = width;
>>>> +		pixfmt->height = height;
>>>> +	};
>>>> +
>>>>     	pixfmt->field = V4L2_FIELD_NONE;
>>>>     	pixfmt->bytesperline = pixfmt->width * dcmi_fmt->bpp;
>>>>     	pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height;
>>>> @@ -741,6 +776,8 @@ static int dcmi_set_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f)
>>>>     	struct v4l2_subdev_format format = {
>>>>     		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
>>>>     	};
>>>> +	struct v4l2_mbus_framefmt *mf = &format.format;
>>>> +	struct v4l2_pix_format *pixfmt = &f->fmt.pix;
>>>>     	const struct dcmi_format *current_fmt;
>>>>     	int ret;
>>>>     
>>>> @@ -748,13 +785,28 @@ static int dcmi_set_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f)
>>>>     	if (ret)
>>>>     		return ret;
>>>>     
>>>> -	v4l2_fill_mbus_format(&format.format, &f->fmt.pix,
>>>> +	v4l2_fill_mbus_format(&format.format, pixfmt,
>>>>     			      current_fmt->mbus_code);
>>>>     	ret = v4l2_subdev_call(dcmi->entity.subdev, pad,
>>>>     			       set_fmt, NULL, &format);
>>>>     	if (ret < 0)
>>>>     		return ret;
>>>>     
>>>> +	/* Enable crop if sensor resolution is larger than request */
>>>> +	dcmi->do_crop = false;
>>>> +	if ((mf->width > pixfmt->width) || (mf->height > pixfmt->height)) {
>>>> +		dcmi->crop.width = pixfmt->width;
>>>> +		dcmi->crop.height = pixfmt->height;
>>>> +		dcmi->crop.left = (mf->width - pixfmt->width) / 2;
>>>> +		dcmi->crop.top = (mf->height - pixfmt->height) / 2;
>>>> +		dcmi->do_crop = true;
>>>
>>> Why not implement the selection API instead? I assume that you can crop from any
>>> region of the sensor, not just the center part.
>>
>> The point here was to add some flexibility for user in term of
>> resolution and also less memory consumption.
>> For example here I want to make a 480x272 preview:
>> - without this change: S_FMT(480x272) returns VGA (the OV9655 larger
>> discrete resolution), then app has to capture VGA frames then crop to
>> fit 480x272 frame buffer.
>> - with this change: S_FMT(480x272) returns 480x272 (crop done by
>> hardware), app can directly capture 480x272 then copy to framebuffer
>> without any conversion.
>>
>> Implementation of V4L2 crop using SELECTION API could also be used,
>> but I need to change app.
>>
>> More generally, with a given couple ISP+sensor, will S_FMT()
>> return the sensor only supported resolutions ? or the supported
>> resolutions of the couple ISP+sensor (ISP will downscale/upscale/crop
>> the sensor discrete resolution to fit user request) ?
>>
>> Hans, what are your recommendations ?
> 
> This is not the way the V4L2 API works.
> 
> Sensors report their supported resolutions through the ENUM_FRAMESIZES
> (and the related ENUM_FRAMEINTERVALS) ioctls.
> 
> With S_FMT you pick the resolution you want.
> 
> If you then want to crop the driver should implement the selection API
> (this will also automatically enable the G/S_CROP/CROPCAP ioctls) so the
> application can select which part of the image should be cropped. Assuming
> there is no scaler then after cropping the format size will be reduced
> to the size of the cropped image.
> 
> That's in a nutshell how these ioctls relate to one another.
> 
> Regards,
> 
> 	Hans
> 

Ok, crystal clear, I'll implement selection API so.
BR,
Hugues.

>>
>>>
>>> Regards,
>>>
>>> 	Hans
>>>
>>>> +
>>>> +		dev_dbg(dcmi->dev, "%ux%u cropped to %ux%u@(%u,%u)\n",
>>>> +			mf->width, mf->height,
>>>> +			dcmi->crop.width, dcmi->crop.height,
>>>> +			dcmi->crop.left, dcmi->crop.top);
>>>> +	};
>>>> +
>>>>     	dcmi->fmt = *f;
>>>>     	dcmi->current_fmt = current_fmt;
>>>>     
>>>>
> 

[PATCH] stm32-dcmi: fix semicolon.cocci warnings

[kbuild test robot]

drivers/media/platform/stm32/stm32-dcmi.c:808:2-3: Unneeded semicolon
drivers/media/platform/stm32/stm32-dcmi.c:562:2-3: Unneeded semicolon
drivers/media/platform/stm32/stm32-dcmi.c:762:2-3: Unneeded semicolon


 Remove unneeded semicolon.

Generated by: scripts/coccinelle/misc/semicolon.cocci

Fixes: a8a270dedb25 ("stm32-dcmi: crop sensor image to match user resolution")
CC: Hugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
---

 stm32-dcmi.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/media/platform/stm32/stm32-dcmi.c
+++ b/drivers/media/platform/stm32/stm32-dcmi.c
@@ -559,7 +559,7 @@ static int dcmi_start_streaming(struct v
 
 		/* Enable crop */
 		val |= CR_CROP;
-	};
+	}
 
 	reg_write(dcmi->regs, DCMI_CR, val);
 
@@ -759,7 +759,7 @@ static int dcmi_try_fmt(struct stm32_dcm
 		/* Restore width/height */
 		pixfmt->width = width;
 		pixfmt->height = height;
-	};
+	}
 
 	pixfmt->field = V4L2_FIELD_NONE;
 	pixfmt->bytesperline = pixfmt->width * dcmi_fmt->bpp;
@@ -805,7 +805,7 @@ static int dcmi_set_fmt(struct stm32_dcm
 			mf->width, mf->height,
 			dcmi->crop.width, dcmi->crop.height,
 			dcmi->crop.left, dcmi->crop.top);
-	};
+	}
 
 	dcmi->fmt = *f;
 	dcmi->current_fmt = current_fmt;

[PATCH] stm32-dcmi: fix semicolon.cocci warnings

[kbuild test robot]

drivers/media/platform/stm32/stm32-dcmi.c:808:2-3: Unneeded semicolon
drivers/media/platform/stm32/stm32-dcmi.c:562:2-3: Unneeded semicolon
drivers/media/platform/stm32/stm32-dcmi.c:762:2-3: Unneeded semicolon


 Remove unneeded semicolon.

Generated by: scripts/coccinelle/misc/semicolon.cocci

Fixes: a8a270dedb25 ("stm32-dcmi: crop sensor image to match user resolution")
CC: Hugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
---

 stm32-dcmi.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/media/platform/stm32/stm32-dcmi.c
+++ b/drivers/media/platform/stm32/stm32-dcmi.c
@@ -559,7 +559,7 @@ static int dcmi_start_streaming(struct v
 
 		/* Enable crop */
 		val |= CR_CROP;
-	};
+	}
 
 	reg_write(dcmi->regs, DCMI_CR, val);
 
@@ -759,7 +759,7 @@ static int dcmi_try_fmt(struct stm32_dcm
 		/* Restore width/height */
 		pixfmt->width = width;
 		pixfmt->height = height;
-	};
+	}
 
 	pixfmt->field = V4L2_FIELD_NONE;
 	pixfmt->bytesperline = pixfmt->width * dcmi_fmt->bpp;
@@ -805,7 +805,7 @@ static int dcmi_set_fmt(struct stm32_dcm
 			mf->width, mf->height,
 			dcmi->crop.width, dcmi->crop.height,
 			dcmi->crop.left, dcmi->crop.top);
-	};
+	}
 
 	dcmi->fmt = *f;
 	dcmi->current_fmt = current_fmt;

[PATCH] stm32-dcmi: fix semicolon.cocci warnings

[kbuild test robot]

drivers/media/platform/stm32/stm32-dcmi.c:808:2-3: Unneeded semicolon
drivers/media/platform/stm32/stm32-dcmi.c:562:2-3: Unneeded semicolon
drivers/media/platform/stm32/stm32-dcmi.c:762:2-3: Unneeded semicolon


 Remove unneeded semicolon.

Generated by: scripts/coccinelle/misc/semicolon.cocci

Fixes: a8a270dedb25 ("stm32-dcmi: crop sensor image to match user resolution")
CC: Hugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
---

 stm32-dcmi.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/media/platform/stm32/stm32-dcmi.c
+++ b/drivers/media/platform/stm32/stm32-dcmi.c
@@ -559,7 +559,7 @@ static int dcmi_start_streaming(struct v
 
 		/* Enable crop */
 		val |= CR_CROP;
-	};
+	}
 
 	reg_write(dcmi->regs, DCMI_CR, val);
 
@@ -759,7 +759,7 @@ static int dcmi_try_fmt(struct stm32_dcm
 		/* Restore width/height */
 		pixfmt->width = width;
 		pixfmt->height = height;
-	};
+	}
 
 	pixfmt->field = V4L2_FIELD_NONE;
 	pixfmt->bytesperline = pixfmt->width * dcmi_fmt->bpp;
@@ -805,7 +805,7 @@ static int dcmi_set_fmt(struct stm32_dcm
 			mf->width, mf->height,
 			dcmi->crop.width, dcmi->crop.height,
 			dcmi->crop.left, dcmi->crop.top);
-	};
+	}
 
 	dcmi->fmt = *f;
 	dcmi->current_fmt = current_fmt;

Re: [PATCH v1 3/5] [media] stm32-dcmi: crop sensor image to match user resolution

[kbuild test robot]

Hi Hugues,

[auto build test WARNING on linuxtv-media/master]
[also build test WARNING on next-20170623]
[cannot apply to v4.12-rc6]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Hugues-Fruchet/Camera-support-on-STM32F746G-DISCO-board/20170625-204425
base:   git://linuxtv.org/media_tree.git master


coccinelle warnings: (new ones prefixed by >>)

>> drivers/media/platform/stm32/stm32-dcmi.c:808:2-3: Unneeded semicolon
   drivers/media/platform/stm32/stm32-dcmi.c:562:2-3: Unneeded semicolon
   drivers/media/platform/stm32/stm32-dcmi.c:762:2-3: Unneeded semicolon

Please review and possibly fold the followup patch.

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[PATCH v1 3/5] [media] stm32-dcmi: crop sensor image to match user resolution

[kbuild test robot]

Hi Hugues,

[auto build test WARNING on linuxtv-media/master]
[also build test WARNING on next-20170623]
[cannot apply to v4.12-rc6]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Hugues-Fruchet/Camera-support-on-STM32F746G-DISCO-board/20170625-204425
base:   git://linuxtv.org/media_tree.git master


coccinelle warnings: (new ones prefixed by >>)

>> drivers/media/platform/stm32/stm32-dcmi.c:808:2-3: Unneeded semicolon
   drivers/media/platform/stm32/stm32-dcmi.c:562:2-3: Unneeded semicolon
   drivers/media/platform/stm32/stm32-dcmi.c:762:2-3: Unneeded semicolon

Please review and possibly fold the followup patch.

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

Re: [PATCH v1 3/5] [media] stm32-dcmi: crop sensor image to match user resolution

[kbuild test robot]

Hi Hugues,

[auto build test WARNING on linuxtv-media/master]
[also build test WARNING on next-20170623]
[cannot apply to v4.12-rc6]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Hugues-Fruchet/Camera-support-on-STM32F746G-DISCO-board/20170625-204425
base:   git://linuxtv.org/media_tree.git master


coccinelle warnings: (new ones prefixed by >>)

>> drivers/media/platform/stm32/stm32-dcmi.c:808:2-3: Unneeded semicolon
   drivers/media/platform/stm32/stm32-dcmi.c:562:2-3: Unneeded semicolon
   drivers/media/platform/stm32/stm32-dcmi.c:762:2-3: Unneeded semicolon

Please review and possibly fold the followup patch.

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[PATCH v1 4/5] ARM: dts: stm32: Enable DCMI support on STM32F746 MCU

[Hugues Fruchet]

Enable DCMI camera interface on STM32F746 MCU.

Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
---
 arch/arm/boot/dts/stm32f746.dtsi | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi
index c2765ce..4bdf37c 100644
--- a/arch/arm/boot/dts/stm32f746.dtsi
+++ b/arch/arm/boot/dts/stm32f746.dtsi
@@ -326,6 +326,23 @@
 					bias-disable;
 				};
 			};
+
+			dcmi_pins: dcmi_pins@0 {
+				pins {
+					pinmux = <STM32F746_PA4_FUNC_DCMI_HSYNC>,
+						 <STM32F746_PG9_FUNC_DCMI_VSYNC>,
+						 <STM32F746_PA6_FUNC_DCMI_PIXCLK>,
+						 <STM32F746_PH9_FUNC_DCMI_D0>,
+						 <STM32F746_PH10_FUNC_DCMI_D1>,
+						 <STM32F746_PH11_FUNC_DCMI_D2>,
+						 <STM32F746_PH12_FUNC_DCMI_D3>,
+						 <STM32F746_PH14_FUNC_DCMI_D4>,
+						 <STM32F746_PD3_FUNC_DCMI_D5>,
+						 <STM32F746_PE5_FUNC_DCMI_D6>,
+						 <STM32F746_PE6_FUNC_DCMI_D7>;
+					slew-rate = <3>;
+				};
+			};
 		};
 
 		crc: crc@40023000 {
@@ -344,6 +361,20 @@
 			assigned-clocks = <&rcc 1 CLK_HSE_RTC>;
 			assigned-clock-rates = <1000000>;
 		};
+
+		dcmi: dcmi@50050000 {
+			compatible = "st,stm32-dcmi";
+			reg = <0x50050000 0x400>;
+			interrupts = <78>;
+			resets = <&rcc STM32F7_AHB2_RESET(DCMI)>;
+			clocks = <&rcc 0 STM32F7_AHB2_CLOCK(DCMI)>;
+			clock-names = "mclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&dcmi_pins>;
+			dmas = <&dma2 1 1 0x414 0x3>;
+			dma-names = "tx";
+			status = "disabled";
+		};
 	};
 };
 
-- 
1.9.1

[PATCH v1 4/5] ARM: dts: stm32: Enable DCMI support on STM32F746 MCU

[Hugues Fruchet]

Enable DCMI camera interface on STM32F746 MCU.

Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
---
 arch/arm/boot/dts/stm32f746.dtsi | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi
index c2765ce..4bdf37c 100644
--- a/arch/arm/boot/dts/stm32f746.dtsi
+++ b/arch/arm/boot/dts/stm32f746.dtsi
@@ -326,6 +326,23 @@
 					bias-disable;
 				};
 			};
+
+			dcmi_pins: dcmi_pins at 0 {
+				pins {
+					pinmux = <STM32F746_PA4_FUNC_DCMI_HSYNC>,
+						 <STM32F746_PG9_FUNC_DCMI_VSYNC>,
+						 <STM32F746_PA6_FUNC_DCMI_PIXCLK>,
+						 <STM32F746_PH9_FUNC_DCMI_D0>,
+						 <STM32F746_PH10_FUNC_DCMI_D1>,
+						 <STM32F746_PH11_FUNC_DCMI_D2>,
+						 <STM32F746_PH12_FUNC_DCMI_D3>,
+						 <STM32F746_PH14_FUNC_DCMI_D4>,
+						 <STM32F746_PD3_FUNC_DCMI_D5>,
+						 <STM32F746_PE5_FUNC_DCMI_D6>,
+						 <STM32F746_PE6_FUNC_DCMI_D7>;
+					slew-rate = <3>;
+				};
+			};
 		};
 
 		crc: crc at 40023000 {
@@ -344,6 +361,20 @@
 			assigned-clocks = <&rcc 1 CLK_HSE_RTC>;
 			assigned-clock-rates = <1000000>;
 		};
+
+		dcmi: dcmi at 50050000 {
+			compatible = "st,stm32-dcmi";
+			reg = <0x50050000 0x400>;
+			interrupts = <78>;
+			resets = <&rcc STM32F7_AHB2_RESET(DCMI)>;
+			clocks = <&rcc 0 STM32F7_AHB2_CLOCK(DCMI)>;
+			clock-names = "mclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&dcmi_pins>;
+			dmas = <&dma2 1 1 0x414 0x3>;
+			dma-names = "tx";
+			status = "disabled";
+		};
 	};
 };
 
-- 
1.9.1

[PATCH v1 4/5] ARM: dts: stm32: Enable DCMI support on STM32F746 MCU

[Hugues Fruchet]

Enable DCMI camera interface on STM32F746 MCU.

Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
---
 arch/arm/boot/dts/stm32f746.dtsi | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi
index c2765ce..4bdf37c 100644
--- a/arch/arm/boot/dts/stm32f746.dtsi
+++ b/arch/arm/boot/dts/stm32f746.dtsi
@@ -326,6 +326,23 @@
 					bias-disable;
 				};
 			};
+
+			dcmi_pins: dcmi_pins@0 {
+				pins {
+					pinmux = <STM32F746_PA4_FUNC_DCMI_HSYNC>,
+						 <STM32F746_PG9_FUNC_DCMI_VSYNC>,
+						 <STM32F746_PA6_FUNC_DCMI_PIXCLK>,
+						 <STM32F746_PH9_FUNC_DCMI_D0>,
+						 <STM32F746_PH10_FUNC_DCMI_D1>,
+						 <STM32F746_PH11_FUNC_DCMI_D2>,
+						 <STM32F746_PH12_FUNC_DCMI_D3>,
+						 <STM32F746_PH14_FUNC_DCMI_D4>,
+						 <STM32F746_PD3_FUNC_DCMI_D5>,
+						 <STM32F746_PE5_FUNC_DCMI_D6>,
+						 <STM32F746_PE6_FUNC_DCMI_D7>;
+					slew-rate = <3>;
+				};
+			};
 		};
 
 		crc: crc@40023000 {
@@ -344,6 +361,20 @@
 			assigned-clocks = <&rcc 1 CLK_HSE_RTC>;
 			assigned-clock-rates = <1000000>;
 		};
+
+		dcmi: dcmi@50050000 {
+			compatible = "st,stm32-dcmi";
+			reg = <0x50050000 0x400>;
+			interrupts = <78>;
+			resets = <&rcc STM32F7_AHB2_RESET(DCMI)>;
+			clocks = <&rcc 0 STM32F7_AHB2_CLOCK(DCMI)>;
+			clock-names = "mclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&dcmi_pins>;
+			dmas = <&dma2 1 1 0x414 0x3>;
+			dma-names = "tx";
+			status = "disabled";
+		};
 	};
 };
 
-- 
1.9.1

Re: [PATCH v1 4/5] ARM: dts: stm32: Enable DCMI support on STM32F746 MCU

[kbuild test robot]

[-- Attachment #1: Type: text/plain, Size: 992 bytes --]

Hi Hugues,

[auto build test ERROR on linuxtv-media/master]
[cannot apply to v4.12-rc7 next-20170630]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Hugues-Fruchet/Camera-support-on-STM32F746G-DISCO-board/20170625-204425
base:   git://linuxtv.org/media_tree.git master
config: arm-spear6xx_defconfig (attached as .config)
compiler: arm-linux-gnueabi-gcc (Debian 6.1.1-9) 6.1.1 20160705
reproduce:
        wget https://raw.githubusercontent.com/01org/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # save the attached .config to linux build tree
        make.cross ARCH=arm 

All errors (new ones prefixed by >>):

>> ERROR: Input tree has errors, aborting (use -f to force output)

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 14926 bytes --]

[PATCH v1 4/5] ARM: dts: stm32: Enable DCMI support on STM32F746 MCU

[kbuild test robot]

Hi Hugues,

[auto build test ERROR on linuxtv-media/master]
[cannot apply to v4.12-rc7 next-20170630]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Hugues-Fruchet/Camera-support-on-STM32F746G-DISCO-board/20170625-204425
base:   git://linuxtv.org/media_tree.git master
config: arm-spear6xx_defconfig (attached as .config)
compiler: arm-linux-gnueabi-gcc (Debian 6.1.1-9) 6.1.1 20160705
reproduce:
        wget https://raw.githubusercontent.com/01org/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # save the attached .config to linux build tree
        make.cross ARCH=arm 

All errors (new ones prefixed by >>):

>> ERROR: Input tree has errors, aborting (use -f to force output)

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation
-------------- next part --------------
A non-text attachment was scrubbed...
Name: .config.gz
Type: application/gzip
Size: 14926 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20170702/61b07578/attachment-0001.gz>

Re: [PATCH v1 4/5] ARM: dts: stm32: Enable DCMI support on STM32F746 MCU

[kbuild test robot]

[-- Attachment #1: Type: text/plain, Size: 992 bytes --]

Hi Hugues,

[auto build test ERROR on linuxtv-media/master]
[cannot apply to v4.12-rc7 next-20170630]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Hugues-Fruchet/Camera-support-on-STM32F746G-DISCO-board/20170625-204425
base:   git://linuxtv.org/media_tree.git master
config: arm-spear6xx_defconfig (attached as .config)
compiler: arm-linux-gnueabi-gcc (Debian 6.1.1-9) 6.1.1 20160705
reproduce:
        wget https://raw.githubusercontent.com/01org/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # save the attached .config to linux build tree
        make.cross ARCH=arm 

All errors (new ones prefixed by >>):

>> ERROR: Input tree has errors, aborting (use -f to force output)

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 14926 bytes --]

[PATCH v1 5/5] ARM: configs: stm32: DCMI + OV9655 camera support

[Hugues Fruchet]

Enable DCMI camera interface and OV9655 camera sensor drivers.

Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
---
 arch/arm/configs/stm32_defconfig | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/configs/stm32_defconfig b/arch/arm/configs/stm32_defconfig
index a097538..0c3cd01 100644
--- a/arch/arm/configs/stm32_defconfig
+++ b/arch/arm/configs/stm32_defconfig
@@ -55,6 +55,15 @@ CONFIG_I2C_STM32F4=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 # CONFIG_USB_SUPPORT is not set
+CONFIG_VIDEO_V4L2=y
+CONFIG_MEDIA_CONTROLLER=y
+CONFIG_VIDEO_V4L2_SUBDEV_API=y
+CONFIG_MEDIA_SUBDRV_AUTOSELECT=n
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_VIDEO_STM32_DCMI=y
+CONFIG_VIDEO_OV9650=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
-- 
1.9.1

[PATCH v1 5/5] ARM: configs: stm32: DCMI + OV9655 camera support

[Hugues Fruchet]

Enable DCMI camera interface and OV9655 camera sensor drivers.

Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
---
 arch/arm/configs/stm32_defconfig | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/configs/stm32_defconfig b/arch/arm/configs/stm32_defconfig
index a097538..0c3cd01 100644
--- a/arch/arm/configs/stm32_defconfig
+++ b/arch/arm/configs/stm32_defconfig
@@ -55,6 +55,15 @@ CONFIG_I2C_STM32F4=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 # CONFIG_USB_SUPPORT is not set
+CONFIG_VIDEO_V4L2=y
+CONFIG_MEDIA_CONTROLLER=y
+CONFIG_VIDEO_V4L2_SUBDEV_API=y
+CONFIG_MEDIA_SUBDRV_AUTOSELECT=n
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_VIDEO_STM32_DCMI=y
+CONFIG_VIDEO_OV9650=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
-- 
1.9.1

[PATCH v1 5/5] ARM: configs: stm32: DCMI + OV9655 camera support

[Hugues Fruchet]

Enable DCMI camera interface and OV9655 camera sensor drivers.

Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
---
 arch/arm/configs/stm32_defconfig | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/configs/stm32_defconfig b/arch/arm/configs/stm32_defconfig
index a097538..0c3cd01 100644
--- a/arch/arm/configs/stm32_defconfig
+++ b/arch/arm/configs/stm32_defconfig
@@ -55,6 +55,15 @@ CONFIG_I2C_STM32F4=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 # CONFIG_USB_SUPPORT is not set
+CONFIG_VIDEO_V4L2=y
+CONFIG_MEDIA_CONTROLLER=y
+CONFIG_VIDEO_V4L2_SUBDEV_API=y
+CONFIG_MEDIA_SUBDRV_AUTOSELECT=n
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_VIDEO_STM32_DCMI=y
+CONFIG_VIDEO_OV9650=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
-- 
1.9.1