* i40e mbuf->rss indication @ 2018-03-21 18:47 Hanoch Haim (hhaim) 2018-03-22 11:34 ` Bruce Richardson 0 siblings, 1 reply; 8+ messages in thread From: Hanoch Haim (hhaim) @ 2018-03-21 18:47 UTC (permalink / raw) To: dev; +Cc: Hanoch Haim (hhaim) Hi All, DPDK:17.11 When i40e is configured with RSS enabled and hash.type=toeplitz m->hash.rss = some weird number ((m->ol_flags&PKT_RX_RSS_HASH) == PKT_RX_RSS_HASH The hash value is correct and match the MS Toeplitz standard. Is this expected? The above works fine with ixgbe/mlx5 Thanks, Hanoh ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: i40e mbuf->rss indication 2018-03-21 18:47 i40e mbuf->rss indication Hanoch Haim (hhaim) @ 2018-03-22 11:34 ` Bruce Richardson 2018-03-22 11:46 ` Hanoch Haim (hhaim) 0 siblings, 1 reply; 8+ messages in thread From: Bruce Richardson @ 2018-03-22 11:34 UTC (permalink / raw) To: Hanoch Haim (hhaim); +Cc: dev On Wed, Mar 21, 2018 at 06:47:22PM +0000, Hanoch Haim (hhaim) wrote: > Hi All, > DPDK:17.11 > When i40e is configured with RSS enabled and hash.type=toeplitz > > m->hash.rss = some weird number > ((m->ol_flags&PKT_RX_RSS_HASH) == PKT_RX_RSS_HASH > > The hash value is correct and match the MS Toeplitz standard. > > Is this expected? I'm sorry, but I don't quite follow the question, or the problem. Are you meaning to say that the hash value is incorrect, or that the flag is not being set or something else? /Bruce > > The above works fine with ixgbe/mlx5 > > Thanks, > Hanoh > ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: i40e mbuf->rss indication 2018-03-22 11:34 ` Bruce Richardson @ 2018-03-22 11:46 ` Hanoch Haim (hhaim) 2018-03-22 12:18 ` Ferruh Yigit 0 siblings, 1 reply; 8+ messages in thread From: Hanoch Haim (hhaim) @ 2018-03-22 11:46 UTC (permalink / raw) To: Bruce Richardson; +Cc: dev Driver: i40e DPDK : 17.11 Configuration : 1) RSS configuration rxmode.mq_mode = ETH_MQ_RX_RSS; rss->rss_hf = ETH_RSS_UDP | ETH_RSS_TCP; rss->rss_key = Microsoft key rss->rss_key_len = 52 *configure RETA to some rx-queues 2) Change hash to TOEPLITZ (only for i40e) struct rte_eth_hash_filter_info info = {}; info.info_type = RTE_ETH_HASH_FILTER_GLOBAL_CONFIG; info.info.global_conf.hash_func = RTE_ETH_HASH_FUNCTION_TOEPLITZ; rte_eth_dev_filter_ctrl(m_repid, RTE_ETH_FILTER_HASH, RTE_ETH_FILTER_SET, &info); 3) Configure some flow-director rules 4) TCP/UDP packets are received to the *right* core (based on a SW Toeplitz calculation +reta table) however The reported rss value is *wrong* in the mbuf (m->hash.rss == *wrong value*) ((m->ol_flags&PKT_RX_RSS_HASH) == PKT_RX_RSS_HASH 5) The above works fine for mlx5 and ixgbe 6) I suspect the hash is something else, maybe flow-director id or xor hash .. Wanted to know if this is a known issue. I can provide a simple way to reproduce it using TRex Thanks, Hanoh -----Original Message----- From: Bruce Richardson [mailto:bruce.richardson@intel.com] Sent: Thursday, March 22, 2018 1:35 PM To: Hanoch Haim (hhaim) Cc: dev@dpdk.org Subject: Re: [dpdk-dev] i40e mbuf->rss indication On Wed, Mar 21, 2018 at 06:47:22PM +0000, Hanoch Haim (hhaim) wrote: > Hi All, > DPDK:17.11 > When i40e is configured with RSS enabled and hash.type=toeplitz > > m->hash.rss = some weird number > ((m->ol_flags&PKT_RX_RSS_HASH) == PKT_RX_RSS_HASH > > The hash value is correct and match the MS Toeplitz standard. > > Is this expected? I'm sorry, but I don't quite follow the question, or the problem. Are you meaning to say that the hash value is incorrect, or that the flag is not being set or something else? /Bruce > > The above works fine with ixgbe/mlx5 > > Thanks, > Hanoh > ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: i40e mbuf->rss indication 2018-03-22 11:46 ` Hanoch Haim (hhaim) @ 2018-03-22 12:18 ` Ferruh Yigit 2018-03-22 12:52 ` Hanoch Haim (hhaim) 0 siblings, 1 reply; 8+ messages in thread From: Ferruh Yigit @ 2018-03-22 12:18 UTC (permalink / raw) To: Hanoch Haim (hhaim), Bruce Richardson; +Cc: dev On 3/22/2018 11:46 AM, Hanoch Haim (hhaim) wrote: > Driver: i40e > > DPDK : 17.11 > > Configuration : > > 1) RSS configuration > rxmode.mq_mode = ETH_MQ_RX_RSS; > rss->rss_hf = ETH_RSS_UDP | ETH_RSS_TCP; > rss->rss_key = Microsoft key > rss->rss_key_len = 52 > > *configure RETA to some rx-queues > > 2) Change hash to TOEPLITZ (only for i40e) > > struct rte_eth_hash_filter_info info = {}; > info.info_type = RTE_ETH_HASH_FILTER_GLOBAL_CONFIG; > info.info.global_conf.hash_func = RTE_ETH_HASH_FUNCTION_TOEPLITZ; > rte_eth_dev_filter_ctrl(m_repid, > RTE_ETH_FILTER_HASH, > RTE_ETH_FILTER_SET, &info); > > 3) Configure some flow-director rules > > 4) TCP/UDP packets are received to the *right* core (based on a SW Toeplitz calculation +reta table) however > The reported rss value is *wrong* in the mbuf > (m->hash.rss == *wrong value*) Are you getting same result with both scalar and vector driver? > ((m->ol_flags&PKT_RX_RSS_HASH) == PKT_RX_RSS_HASH > > 5) The above works fine for mlx5 and ixgbe > > 6) I suspect the hash is something else, maybe flow-director id or xor hash .. > > Wanted to know if this is a known issue. I can provide a simple way to reproduce it using TRex > > Thanks, > Hanoh > > > -----Original Message----- > From: Bruce Richardson [mailto:bruce.richardson@intel.com] > Sent: Thursday, March 22, 2018 1:35 PM > To: Hanoch Haim (hhaim) > Cc: dev@dpdk.org > Subject: Re: [dpdk-dev] i40e mbuf->rss indication > > On Wed, Mar 21, 2018 at 06:47:22PM +0000, Hanoch Haim (hhaim) wrote: >> Hi All, >> DPDK:17.11 >> When i40e is configured with RSS enabled and hash.type=toeplitz >> >> m->hash.rss = some weird number >> ((m->ol_flags&PKT_RX_RSS_HASH) == PKT_RX_RSS_HASH >> >> The hash value is correct and match the MS Toeplitz standard. >> >> Is this expected? > > I'm sorry, but I don't quite follow the question, or the problem. Are you meaning to say that the hash value is incorrect, or that the flag is not being set or something else? > > /Bruce > >> >> The above works fine with ixgbe/mlx5 >> >> Thanks, >> Hanoh >> ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: i40e mbuf->rss indication 2018-03-22 12:18 ` Ferruh Yigit @ 2018-03-22 12:52 ` Hanoch Haim (hhaim) 2018-03-22 14:21 ` Bruce Richardson 0 siblings, 1 reply; 8+ messages in thread From: Hanoch Haim (hhaim) @ 2018-03-22 12:52 UTC (permalink / raw) To: Ferruh Yigit, Bruce Richardson; +Cc: dev Hi, I think this is not the vector driver because I'm user scatter/gather Thanks, Hanoh -----Original Message----- From: Ferruh Yigit [mailto:ferruh.yigit@intel.com] Sent: Thursday, March 22, 2018 2:18 PM To: Hanoch Haim (hhaim); Bruce Richardson Cc: dev@dpdk.org Subject: Re: [dpdk-dev] i40e mbuf->rss indication On 3/22/2018 11:46 AM, Hanoch Haim (hhaim) wrote: > Driver: i40e > > DPDK : 17.11 > > Configuration : > > 1) RSS configuration > rxmode.mq_mode = ETH_MQ_RX_RSS; > rss->rss_hf = ETH_RSS_UDP | ETH_RSS_TCP; > rss->rss_key = Microsoft key > rss->rss_key_len = 52 > > *configure RETA to some rx-queues > > 2) Change hash to TOEPLITZ (only for i40e) > > struct rte_eth_hash_filter_info info = {}; > info.info_type = RTE_ETH_HASH_FILTER_GLOBAL_CONFIG; > info.info.global_conf.hash_func = RTE_ETH_HASH_FUNCTION_TOEPLITZ; > rte_eth_dev_filter_ctrl(m_repid, > RTE_ETH_FILTER_HASH, > RTE_ETH_FILTER_SET, &info); > > 3) Configure some flow-director rules > > 4) TCP/UDP packets are received to the *right* core (based on a SW Toeplitz calculation +reta table) however > The reported rss value is *wrong* in the mbuf > (m->hash.rss == *wrong value*) Are you getting same result with both scalar and vector driver? > ((m->ol_flags&PKT_RX_RSS_HASH) == PKT_RX_RSS_HASH > > 5) The above works fine for mlx5 and ixgbe > > 6) I suspect the hash is something else, maybe flow-director id or xor hash .. > > Wanted to know if this is a known issue. I can provide a simple way to reproduce it using TRex > > Thanks, > Hanoh > > > -----Original Message----- > From: Bruce Richardson [mailto:bruce.richardson@intel.com] > Sent: Thursday, March 22, 2018 1:35 PM > To: Hanoch Haim (hhaim) > Cc: dev@dpdk.org > Subject: Re: [dpdk-dev] i40e mbuf->rss indication > > On Wed, Mar 21, 2018 at 06:47:22PM +0000, Hanoch Haim (hhaim) wrote: >> Hi All, >> DPDK:17.11 >> When i40e is configured with RSS enabled and hash.type=toeplitz >> >> m->hash.rss = some weird number >> ((m->ol_flags&PKT_RX_RSS_HASH) == PKT_RX_RSS_HASH >> >> The hash value is correct and match the MS Toeplitz standard. >> >> Is this expected? > > I'm sorry, but I don't quite follow the question, or the problem. Are you meaning to say that the hash value is incorrect, or that the flag is not being set or something else? > > /Bruce > >> >> The above works fine with ixgbe/mlx5 >> >> Thanks, >> Hanoh >> ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: i40e mbuf->rss indication 2018-03-22 12:52 ` Hanoch Haim (hhaim) @ 2018-03-22 14:21 ` Bruce Richardson 2018-03-25 18:19 ` Chilikin, Andrey 0 siblings, 1 reply; 8+ messages in thread From: Bruce Richardson @ 2018-03-22 14:21 UTC (permalink / raw) To: Hanoch Haim (hhaim); +Cc: Ferruh Yigit, dev On Thu, Mar 22, 2018 at 12:52:30PM +0000, Hanoch Haim (hhaim) wrote: > Hi, > I think this is not the vector driver because I'm user scatter/gather > Vector driver has supported multi-buffer packets for a while now, so it should be used for packet RX in i40e in just about all cases. If possible, could you check if adjusting the setting for 16B/32B descriptors in the build-time config makes a difference. For 16B descriptors the flow director ID and RSS hash share a field in the descriptor, while they don't with 32B versions (though the vector driver only ever reads the first 16B of each descriptor in any case). /Bruce > Thanks, > Hanoh > > > -----Original Message----- > From: Ferruh Yigit [mailto:ferruh.yigit@intel.com] > Sent: Thursday, March 22, 2018 2:18 PM > To: Hanoch Haim (hhaim); Bruce Richardson > Cc: dev@dpdk.org > Subject: Re: [dpdk-dev] i40e mbuf->rss indication > > On 3/22/2018 11:46 AM, Hanoch Haim (hhaim) wrote: > > Driver: i40e > > > > DPDK : 17.11 > > > > Configuration : > > > > 1) RSS configuration > > rxmode.mq_mode = ETH_MQ_RX_RSS; > > rss->rss_hf = ETH_RSS_UDP | ETH_RSS_TCP; > > rss->rss_key = Microsoft key > > rss->rss_key_len = 52 > > > > *configure RETA to some rx-queues > > > > 2) Change hash to TOEPLITZ (only for i40e) > > > > struct rte_eth_hash_filter_info info = {}; > > info.info_type = RTE_ETH_HASH_FILTER_GLOBAL_CONFIG; > > info.info.global_conf.hash_func = RTE_ETH_HASH_FUNCTION_TOEPLITZ; > > rte_eth_dev_filter_ctrl(m_repid, > > RTE_ETH_FILTER_HASH, > > RTE_ETH_FILTER_SET, &info); > > > > 3) Configure some flow-director rules > > > > 4) TCP/UDP packets are received to the *right* core (based on a SW Toeplitz calculation +reta table) however > > The reported rss value is *wrong* in the mbuf > > (m->hash.rss == *wrong value*) > > Are you getting same result with both scalar and vector driver? > > > ((m->ol_flags&PKT_RX_RSS_HASH) == PKT_RX_RSS_HASH > > > > 5) The above works fine for mlx5 and ixgbe > > > > 6) I suspect the hash is something else, maybe flow-director id or xor hash .. > > > > Wanted to know if this is a known issue. I can provide a simple way to reproduce it using TRex > > > > Thanks, > > Hanoh > > > > > > -----Original Message----- > > From: Bruce Richardson [mailto:bruce.richardson@intel.com] > > Sent: Thursday, March 22, 2018 1:35 PM > > To: Hanoch Haim (hhaim) > > Cc: dev@dpdk.org > > Subject: Re: [dpdk-dev] i40e mbuf->rss indication > > > > On Wed, Mar 21, 2018 at 06:47:22PM +0000, Hanoch Haim (hhaim) wrote: > >> Hi All, > >> DPDK:17.11 > >> When i40e is configured with RSS enabled and hash.type=toeplitz > >> > >> m->hash.rss = some weird number > >> ((m->ol_flags&PKT_RX_RSS_HASH) == PKT_RX_RSS_HASH > >> > >> The hash value is correct and match the MS Toeplitz standard. > >> > >> Is this expected? > > > > I'm sorry, but I don't quite follow the question, or the problem. Are you meaning to say that the hash value is incorrect, or that the flag is not being set or something else? > > > > /Bruce > > > >> > >> The above works fine with ixgbe/mlx5 > >> > >> Thanks, > >> Hanoh > >> > ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: i40e mbuf->rss indication 2018-03-22 14:21 ` Bruce Richardson @ 2018-03-25 18:19 ` Chilikin, Andrey 2018-03-25 21:54 ` Hanoch Haim (hhaim) 0 siblings, 1 reply; 8+ messages in thread From: Chilikin, Andrey @ 2018-03-25 18:19 UTC (permalink / raw) To: Richardson, Bruce, Hanoch Haim (hhaim); +Cc: Yigit, Ferruh, dev Hi Hanoh, Could you please explain what do you mean by *wrong hash value*? i40e calculates hash value for TCP/UDP using 4-tuple: L3 source/destination addresses and L4 source/destination ports. It does not use IP protocol, as TCP and UDP already separated to different PCTYPEs at HW level. Could this be the root cause of the problem you are seeing? Regards, Andrey > -----Original Message----- > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Bruce Richardson > Sent: Thursday, March 22, 2018 2:22 PM > To: Hanoch Haim (hhaim) <hhaim@cisco.com> > Cc: Yigit, Ferruh <ferruh.yigit@intel.com>; dev@dpdk.org > Subject: Re: [dpdk-dev] i40e mbuf->rss indication > > On Thu, Mar 22, 2018 at 12:52:30PM +0000, Hanoch Haim (hhaim) wrote: > > Hi, > > I think this is not the vector driver because I'm user scatter/gather > > > > Vector driver has supported multi-buffer packets for a while now, so it > should be used for packet RX in i40e in just about all cases. > > If possible, could you check if adjusting the setting for 16B/32B > descriptors in the build-time config makes a difference. For 16B > descriptors the flow director ID and RSS hash share a field in the > descriptor, while they don't with 32B versions (though the vector driver > only ever reads the first 16B of each descriptor in any case). > > /Bruce > > > Thanks, > > Hanoh > > > > > > -----Original Message----- > > From: Ferruh Yigit [mailto:ferruh.yigit@intel.com] > > Sent: Thursday, March 22, 2018 2:18 PM > > To: Hanoch Haim (hhaim); Bruce Richardson > > Cc: dev@dpdk.org > > Subject: Re: [dpdk-dev] i40e mbuf->rss indication > > > > On 3/22/2018 11:46 AM, Hanoch Haim (hhaim) wrote: > > > Driver: i40e > > > > > > DPDK : 17.11 > > > > > > Configuration : > > > > > > 1) RSS configuration > > > rxmode.mq_mode = ETH_MQ_RX_RSS; > > > rss->rss_hf = ETH_RSS_UDP | ETH_RSS_TCP; > > > rss->rss_key = Microsoft key > > > rss->rss_key_len = 52 > > > > > > *configure RETA to some rx-queues > > > > > > 2) Change hash to TOEPLITZ (only for i40e) > > > > > > struct rte_eth_hash_filter_info info = {}; > > > info.info_type = RTE_ETH_HASH_FILTER_GLOBAL_CONFIG; > > > info.info.global_conf.hash_func = > RTE_ETH_HASH_FUNCTION_TOEPLITZ; > > > rte_eth_dev_filter_ctrl(m_repid, > > > RTE_ETH_FILTER_HASH, > > > RTE_ETH_FILTER_SET, &info); > > > > > > 3) Configure some flow-director rules > > > > > > 4) TCP/UDP packets are received to the *right* core (based on a SW > Toeplitz calculation +reta table) however > > > The reported rss value is *wrong* in the mbuf > > > (m->hash.rss == *wrong value*) > > > > Are you getting same result with both scalar and vector driver? > > > > > ((m->ol_flags&PKT_RX_RSS_HASH) == PKT_RX_RSS_HASH > > > > > > 5) The above works fine for mlx5 and ixgbe > > > > > > 6) I suspect the hash is something else, maybe flow-director id or xor > hash .. > > > > > > Wanted to know if this is a known issue. I can provide a simple way to > reproduce it using TRex > > > > > > Thanks, > > > Hanoh > > > > > > > > > -----Original Message----- > > > From: Bruce Richardson [mailto:bruce.richardson@intel.com] > > > Sent: Thursday, March 22, 2018 1:35 PM > > > To: Hanoch Haim (hhaim) > > > Cc: dev@dpdk.org > > > Subject: Re: [dpdk-dev] i40e mbuf->rss indication > > > > > > On Wed, Mar 21, 2018 at 06:47:22PM +0000, Hanoch Haim (hhaim) wrote: > > >> Hi All, > > >> DPDK:17.11 > > >> When i40e is configured with RSS enabled and hash.type=toeplitz > > >> > > >> m->hash.rss = some weird number > > >> ((m->ol_flags&PKT_RX_RSS_HASH) == PKT_RX_RSS_HASH > > >> > > >> The hash value is correct and match the MS Toeplitz standard. > > >> > > >> Is this expected? > > > > > > I'm sorry, but I don't quite follow the question, or the problem. Are you > meaning to say that the hash value is incorrect, or that the flag is not being > set or something else? > > > > > > /Bruce > > > > > >> > > >> The above works fine with ixgbe/mlx5 > > >> > > >> Thanks, > > >> Hanoh > > >> > > ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: i40e mbuf->rss indication 2018-03-25 18:19 ` Chilikin, Andrey @ 2018-03-25 21:54 ` Hanoch Haim (hhaim) 0 siblings, 0 replies; 8+ messages in thread From: Hanoch Haim (hhaim) @ 2018-03-25 21:54 UTC (permalink / raw) To: Chilikin, Andrey; +Cc: Richardson, Bruce, Yigit, Ferruh, dev Hi Andrey, The ML specification is clear. The key is defined and work the same for all driver. My point is that the RSS result (Rx-queue) is *correct* but the 32bit intermediate hash value that is reported in the descriptor is not correct. The hash value reside in the first 16B. I can send how to reproduce this if needed.It might be related to flow-director configuration I have. Thanks, Hanoh Sent from my iPhone On 25 Mar 2018, at 11:20, Chilikin, Andrey <andrey.chilikin@intel.com<mailto:andrey.chilikin@intel.com>> wrote: Hi Hanoh, Could you please explain what do you mean by *wrong hash value*? i40e calculates hash value for TCP/UDP using 4-tuple: L3 source/destination addresses and L4 source/destination ports. It does not use IP protocol, as TCP and UDP already separated to different PCTYPEs at HW level. Could this be the root cause of the problem you are seeing? Regards, Andrey -----Original Message----- From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Bruce Richardson Sent: Thursday, March 22, 2018 2:22 PM To: Hanoch Haim (hhaim) <hhaim@cisco.com<mailto:hhaim@cisco.com>> Cc: Yigit, Ferruh <ferruh.yigit@intel.com<mailto:ferruh.yigit@intel.com>>; dev@dpdk.org<mailto:dev@dpdk.org> Subject: Re: [dpdk-dev] i40e mbuf->rss indication On Thu, Mar 22, 2018 at 12:52:30PM +0000, Hanoch Haim (hhaim) wrote: Hi, I think this is not the vector driver because I'm user scatter/gather Vector driver has supported multi-buffer packets for a while now, so it should be used for packet RX in i40e in just about all cases. If possible, could you check if adjusting the setting for 16B/32B descriptors in the build-time config makes a difference. For 16B descriptors the flow director ID and RSS hash share a field in the descriptor, while they don't with 32B versions (though the vector driver only ever reads the first 16B of each descriptor in any case). /Bruce Thanks, Hanoh -----Original Message----- From: Ferruh Yigit [mailto:ferruh.yigit@intel.com] Sent: Thursday, March 22, 2018 2:18 PM To: Hanoch Haim (hhaim); Bruce Richardson Cc: dev@dpdk.org<mailto:dev@dpdk.org> Subject: Re: [dpdk-dev] i40e mbuf->rss indication On 3/22/2018 11:46 AM, Hanoch Haim (hhaim) wrote: Driver: i40e DPDK : 17.11 Configuration : 1) RSS configuration rxmode.mq_mode = ETH_MQ_RX_RSS; rss->rss_hf = ETH_RSS_UDP | ETH_RSS_TCP; rss->rss_key = Microsoft key rss->rss_key_len = 52 *configure RETA to some rx-queues 2) Change hash to TOEPLITZ (only for i40e) struct rte_eth_hash_filter_info info = {}; info.info_type = RTE_ETH_HASH_FILTER_GLOBAL_CONFIG; info.info.global_conf.hash_func = RTE_ETH_HASH_FUNCTION_TOEPLITZ; rte_eth_dev_filter_ctrl(m_repid, RTE_ETH_FILTER_HASH, RTE_ETH_FILTER_SET, &info); 3) Configure some flow-director rules 4) TCP/UDP packets are received to the *right* core (based on a SW Toeplitz calculation +reta table) however The reported rss value is *wrong* in the mbuf (m->hash.rss == *wrong value*) Are you getting same result with both scalar and vector driver? ((m->ol_flags&PKT_RX_RSS_HASH) == PKT_RX_RSS_HASH 5) The above works fine for mlx5 and ixgbe 6) I suspect the hash is something else, maybe flow-director id or xor hash .. Wanted to know if this is a known issue. I can provide a simple way to reproduce it using TRex Thanks, Hanoh -----Original Message----- From: Bruce Richardson [mailto:bruce.richardson@intel.com] Sent: Thursday, March 22, 2018 1:35 PM To: Hanoch Haim (hhaim) Cc: dev@dpdk.org<mailto:dev@dpdk.org> Subject: Re: [dpdk-dev] i40e mbuf->rss indication On Wed, Mar 21, 2018 at 06:47:22PM +0000, Hanoch Haim (hhaim) wrote: Hi All, DPDK:17.11 When i40e is configured with RSS enabled and hash.type=toeplitz m->hash.rss = some weird number ((m->ol_flags&PKT_RX_RSS_HASH) == PKT_RX_RSS_HASH The hash value is correct and match the MS Toeplitz standard. Is this expected? I'm sorry, but I don't quite follow the question, or the problem. Are you meaning to say that the hash value is incorrect, or that the flag is not being set or something else? /Bruce The above works fine with ixgbe/mlx5 Thanks, Hanoh ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2018-03-25 21:54 UTC | newest] Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2018-03-21 18:47 i40e mbuf->rss indication Hanoch Haim (hhaim) 2018-03-22 11:34 ` Bruce Richardson 2018-03-22 11:46 ` Hanoch Haim (hhaim) 2018-03-22 12:18 ` Ferruh Yigit 2018-03-22 12:52 ` Hanoch Haim (hhaim) 2018-03-22 14:21 ` Bruce Richardson 2018-03-25 18:19 ` Chilikin, Andrey 2018-03-25 21:54 ` Hanoch Haim (hhaim)
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.