RE: [PATCH v2 0/5] stm32-ddr-pmu driver creation

[Gerald BAEZA <gerald.baeza@st.com>]

Dear all

A gentle reminder to get your feedbacks on the series below.

Best regards

Gérald



> -----Original Message-----
> From: Gerald BAEZA <gerald.baeza@st.com>
> Sent: lundi 20 mai 2019 17:27
> To: will.deacon@arm.com; mark.rutland@arm.com; robh+dt@kernel.org;
> mcoquelin.stm32@gmail.com; Alexandre TORGUE
> <alexandre.torgue@st.com>; corbet@lwn.net; linux@armlinux.org.uk;
> olof@lixom.net; horms+renesas@verge.net.au; arnd@arndb.de
> Cc: linux-arm-kernel@lists.infradead.org; devicetree@vger.kernel.org; linux-
> stm32@st-md-mailman.stormreply.com; linux-kernel@vger.kernel.org;
> linux-doc@vger.kernel.org; Gerald BAEZA <gerald.baeza@st.com>
> Subject: [PATCH v2 0/5] stm32-ddr-pmu driver creation
> 
> The DDRPERFM is the DDR Performance Monitor embedded in STM32MP1
> SOC.
> 
> This series adds support for the DDRPERFM via a new stm32-ddr-pmu driver,
> registered into the perf framework.
> 
> This driver is inspired from arch/arm/mm/cache-l2x0-pmu.c
> 
> ---
> Changes from v1:
> - add 'resets' description (bindings) and using (driver). Thanks Rob.
> - rebase on 5.2-rc1 (that includes the ddrperfm clock control patch).
> 
> Gerald Baeza (5):
>   Documentation: perf: stm32: ddrperfm support
>   dt-bindings: perf: stm32: ddrperfm support
>   perf: stm32: ddrperfm driver creation
>   ARM: configs: enable STM32_DDR_PMU
>   ARM: dts: stm32: add ddrperfm on stm32mp157c
> 
>  .../devicetree/bindings/perf/stm32-ddr-pmu.txt     |  20 +
>  Documentation/perf/stm32-ddr-pmu.txt               |  41 ++
>  arch/arm/boot/dts/stm32mp157c.dtsi                 |   9 +
>  arch/arm/configs/multi_v7_defconfig                |   1 +
>  drivers/perf/Kconfig                               |   6 +
>  drivers/perf/Makefile                              |   1 +
>  drivers/perf/stm32_ddr_pmu.c                       | 512 +++++++++++++++++++++
>  7 files changed, 590 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/perf/stm32-ddr-
> pmu.txt
>  create mode 100644 Documentation/perf/stm32-ddr-pmu.txt
>  create mode 100644 drivers/perf/stm32_ddr_pmu.c
> 
> --
> 2.7.4