[PATCH] arm64: tegra: Add CPU and PSCI nodes for NVIDIA Tegra210 platforms

[PATCH] arm64: tegra: Add CPU and PSCI nodes for NVIDIA Tegra210 platforms

[Jon Hunter]

Add the CPU and PSCI nodes for the NVIDIA Tegra210 platforms so that
all CPUs can be enabled on boot. This assumes that the PSCI firmware
has been loaded during the initial bootstrap on the device before the
kernel starts (which is typically the case for these platforms). The
PSCI firmware version is set to v0.2 which aligns with the current
shipping version for Tegra.

Reported-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
---
 arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi | 23 +++++++++++++++++++++++
 arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi | 24 ++++++++++++++++++++++++
 2 files changed, 47 insertions(+)

diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
index 906fb836d241..de1696c28140 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
@@ -296,6 +296,29 @@
 		};
 	};
 
+	cpus {
+		cpu@0 {
+			enable-method = "psci";
+		};
+
+		cpu@1 {
+			enable-method = "psci";
+		};
+
+		cpu@2 {
+			enable-method = "psci";
+		};
+
+		cpu@3 {
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
 	regulators {
 		vdd_gpu: regulator@100 {
 			compatible = "pwm-regulator";
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi
index 0ec92578cacb..67cb039965fd 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi
@@ -51,4 +51,28 @@
 			clock-frequency = <32768>;
 		};
 	};
+
+	cpus {
+		cpu@0 {
+			enable-method = "psci";
+		};
+
+		cpu@1 {
+			enable-method = "psci";
+		};
+
+		cpu@2 {
+			enable-method = "psci";
+		};
+
+		cpu@3 {
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
 };
-- 
2.7.4

[PATCH] arm64: tegra: Add CPU and PSCI nodes for NVIDIA Tegra210 platforms

[Jon Hunter]

Add the CPU and PSCI nodes for the NVIDIA Tegra210 platforms so that
all CPUs can be enabled on boot. This assumes that the PSCI firmware
has been loaded during the initial bootstrap on the device before the
kernel starts (which is typically the case for these platforms). The
PSCI firmware version is set to v0.2 which aligns with the current
shipping version for Tegra.

Reported-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
---
 arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi | 23 +++++++++++++++++++++++
 arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi | 24 ++++++++++++++++++++++++
 2 files changed, 47 insertions(+)

diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
index 906fb836d241..de1696c28140 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
@@ -296,6 +296,29 @@
 		};
 	};
 
+	cpus {
+		cpu at 0 {
+			enable-method = "psci";
+		};
+
+		cpu at 1 {
+			enable-method = "psci";
+		};
+
+		cpu at 2 {
+			enable-method = "psci";
+		};
+
+		cpu at 3 {
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
 	regulators {
 		vdd_gpu: regulator at 100 {
 			compatible = "pwm-regulator";
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi
index 0ec92578cacb..67cb039965fd 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi
@@ -51,4 +51,28 @@
 			clock-frequency = <32768>;
 		};
 	};
+
+	cpus {
+		cpu at 0 {
+			enable-method = "psci";
+		};
+
+		cpu at 1 {
+			enable-method = "psci";
+		};
+
+		cpu at 2 {
+			enable-method = "psci";
+		};
+
+		cpu at 3 {
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
 };
-- 
2.7.4

Re: [PATCH] arm64: tegra: Add CPU and PSCI nodes for NVIDIA Tegra210 platforms

[Sudeep Holla]

On 28/03/17 12:48, Jon Hunter wrote:
> Add the CPU and PSCI nodes for the NVIDIA Tegra210 platforms so that
> all CPUs can be enabled on boot. This assumes that the PSCI firmware
> has been loaded during the initial bootstrap on the device before the
> kernel starts (which is typically the case for these platforms). The
> PSCI firmware version is set to v0.2 which aligns with the current
> shipping version for Tegra.
> 
> Reported-by: Martin Michlmayr <tbm@cyrius.com>
> Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
> ---
>  arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi | 23 +++++++++++++++++++++++
>  arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi | 24 ++++++++++++++++++++++++
>  2 files changed, 47 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
> index 906fb836d241..de1696c28140 100644
> --- a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
> +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
> @@ -296,6 +296,29 @@
>  		};
>  	};
>  
> +	cpus {
> +		cpu@0 {
> +			enable-method = "psci";

Is some firmware expected to populate other required properties ?

If yes, why not populate everything in the firmware ?

If no, how does it even boot secondaries without the "reg" property
that usually contains MPIDR.

-- 
Regards,
Sudeep

[PATCH] arm64: tegra: Add CPU and PSCI nodes for NVIDIA Tegra210 platforms

[Sudeep Holla]

On 28/03/17 12:48, Jon Hunter wrote:
> Add the CPU and PSCI nodes for the NVIDIA Tegra210 platforms so that
> all CPUs can be enabled on boot. This assumes that the PSCI firmware
> has been loaded during the initial bootstrap on the device before the
> kernel starts (which is typically the case for these platforms). The
> PSCI firmware version is set to v0.2 which aligns with the current
> shipping version for Tegra.
> 
> Reported-by: Martin Michlmayr <tbm@cyrius.com>
> Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
> ---
>  arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi | 23 +++++++++++++++++++++++
>  arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi | 24 ++++++++++++++++++++++++
>  2 files changed, 47 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
> index 906fb836d241..de1696c28140 100644
> --- a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
> +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
> @@ -296,6 +296,29 @@
>  		};
>  	};
>  
> +	cpus {
> +		cpu at 0 {
> +			enable-method = "psci";

Is some firmware expected to populate other required properties ?

If yes, why not populate everything in the firmware ?

If no, how does it even boot secondaries without the "reg" property
that usually contains MPIDR.

-- 
Regards,
Sudeep

Re: [PATCH] arm64: tegra: Add CPU and PSCI nodes for NVIDIA Tegra210 platforms

[Jon Hunter]

On 28/03/17 15:55, Sudeep Holla wrote:
> On 28/03/17 12:48, Jon Hunter wrote:
>> Add the CPU and PSCI nodes for the NVIDIA Tegra210 platforms so that
>> all CPUs can be enabled on boot. This assumes that the PSCI firmware
>> has been loaded during the initial bootstrap on the device before the
>> kernel starts (which is typically the case for these platforms). The
>> PSCI firmware version is set to v0.2 which aligns with the current
>> shipping version for Tegra.
>>
>> Reported-by: Martin Michlmayr <tbm-R+vWnYXSFMfQT0dZR+AlfA@public.gmane.org>
>> Signed-off-by: Jon Hunter <jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
>> ---
>>  arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi | 23 +++++++++++++++++++++++
>>  arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi | 24 ++++++++++++++++++++++++
>>  2 files changed, 47 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
>> index 906fb836d241..de1696c28140 100644
>> --- a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
>> +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
>> @@ -296,6 +296,29 @@
>>  		};
>>  	};
>>  
>> +	cpus {
>> +		cpu@0 {
>> +			enable-method = "psci";
> 
> Is some firmware expected to populate other required properties ?
> 
> If yes, why not populate everything in the firmware ?
> 
> If no, how does it even boot secondaries without the "reg" property
> that usually contains MPIDR.

Please see 'arch/arm64/boot/dts/nvidia/tegra210.dtsi' which has these
fields. So far we have been populating the psci information at the board
level and so I have kept with that here and so the above is just the
delta. Maybe the $subject could be a little clearer!

Jon

-- 
nvpublic
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH] arm64: tegra: Add CPU and PSCI nodes for NVIDIA Tegra210 platforms

[Jon Hunter]

On 28/03/17 15:55, Sudeep Holla wrote:
> On 28/03/17 12:48, Jon Hunter wrote:
>> Add the CPU and PSCI nodes for the NVIDIA Tegra210 platforms so that
>> all CPUs can be enabled on boot. This assumes that the PSCI firmware
>> has been loaded during the initial bootstrap on the device before the
>> kernel starts (which is typically the case for these platforms). The
>> PSCI firmware version is set to v0.2 which aligns with the current
>> shipping version for Tegra.
>>
>> Reported-by: Martin Michlmayr <tbm@cyrius.com>
>> Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
>> ---
>>  arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi | 23 +++++++++++++++++++++++
>>  arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi | 24 ++++++++++++++++++++++++
>>  2 files changed, 47 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
>> index 906fb836d241..de1696c28140 100644
>> --- a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
>> +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
>> @@ -296,6 +296,29 @@
>>  		};
>>  	};
>>  
>> +	cpus {
>> +		cpu at 0 {
>> +			enable-method = "psci";
> 
> Is some firmware expected to populate other required properties ?
> 
> If yes, why not populate everything in the firmware ?
> 
> If no, how does it even boot secondaries without the "reg" property
> that usually contains MPIDR.

Please see 'arch/arm64/boot/dts/nvidia/tegra210.dtsi' which has these
fields. So far we have been populating the psci information at the board
level and so I have kept with that here and so the above is just the
delta. Maybe the $subject could be a little clearer!

Jon

-- 
nvpublic

Re: [PATCH] arm64: tegra: Add CPU and PSCI nodes for NVIDIA Tegra210 platforms

[Sudeep Holla]

On 28/03/17 16:32, Jon Hunter wrote:
> 
> On 28/03/17 15:55, Sudeep Holla wrote:
>> On 28/03/17 12:48, Jon Hunter wrote:
>>> Add the CPU and PSCI nodes for the NVIDIA Tegra210 platforms so that
>>> all CPUs can be enabled on boot. This assumes that the PSCI firmware
>>> has been loaded during the initial bootstrap on the device before the
>>> kernel starts (which is typically the case for these platforms). The
>>> PSCI firmware version is set to v0.2 which aligns with the current
>>> shipping version for Tegra.
>>>
>>> Reported-by: Martin Michlmayr <tbm-R+vWnYXSFMfQT0dZR+AlfA@public.gmane.org>
>>> Signed-off-by: Jon Hunter <jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
>>> ---
>>>  arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi | 23 +++++++++++++++++++++++
>>>  arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi | 24 ++++++++++++++++++++++++
>>>  2 files changed, 47 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
>>> index 906fb836d241..de1696c28140 100644
>>> --- a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
>>> +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
>>> @@ -296,6 +296,29 @@
>>>  		};
>>>  	};
>>>  
>>> +	cpus {
>>> +		cpu@0 {
>>> +			enable-method = "psci";
>>
>> Is some firmware expected to populate other required properties ?
>>
>> If yes, why not populate everything in the firmware ?
>>
>> If no, how does it even boot secondaries without the "reg" property
>> that usually contains MPIDR.
> 
> Please see 'arch/arm64/boot/dts/nvidia/tegra210.dtsi' which has these
> fields. So far we have been populating the psci information at the board
> level and so I have kept with that here and so the above is just the
> delta. Maybe the $subject could be a little clearer!

Sorry for the noise, I traversed files/headers upwards and missed
the innermost tegra210.dtsi :(

-- 
Regards,
Sudeep

[PATCH] arm64: tegra: Add CPU and PSCI nodes for NVIDIA Tegra210 platforms

[Sudeep Holla]

On 28/03/17 16:32, Jon Hunter wrote:
> 
> On 28/03/17 15:55, Sudeep Holla wrote:
>> On 28/03/17 12:48, Jon Hunter wrote:
>>> Add the CPU and PSCI nodes for the NVIDIA Tegra210 platforms so that
>>> all CPUs can be enabled on boot. This assumes that the PSCI firmware
>>> has been loaded during the initial bootstrap on the device before the
>>> kernel starts (which is typically the case for these platforms). The
>>> PSCI firmware version is set to v0.2 which aligns with the current
>>> shipping version for Tegra.
>>>
>>> Reported-by: Martin Michlmayr <tbm@cyrius.com>
>>> Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
>>> ---
>>>  arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi | 23 +++++++++++++++++++++++
>>>  arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi | 24 ++++++++++++++++++++++++
>>>  2 files changed, 47 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
>>> index 906fb836d241..de1696c28140 100644
>>> --- a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
>>> +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
>>> @@ -296,6 +296,29 @@
>>>  		};
>>>  	};
>>>  
>>> +	cpus {
>>> +		cpu at 0 {
>>> +			enable-method = "psci";
>>
>> Is some firmware expected to populate other required properties ?
>>
>> If yes, why not populate everything in the firmware ?
>>
>> If no, how does it even boot secondaries without the "reg" property
>> that usually contains MPIDR.
> 
> Please see 'arch/arm64/boot/dts/nvidia/tegra210.dtsi' which has these
> fields. So far we have been populating the psci information at the board
> level and so I have kept with that here and so the above is just the
> delta. Maybe the $subject could be a little clearer!

Sorry for the noise, I traversed files/headers upwards and missed
the innermost tegra210.dtsi :(

-- 
Regards,
Sudeep

Re: [PATCH] arm64: tegra: Add CPU and PSCI nodes for NVIDIA Tegra210 platforms

[Stephen Warren]

On 03/28/2017 05:48 AM, Jon Hunter wrote:
> Add the CPU and PSCI nodes for the NVIDIA Tegra210 platforms so that
> all CPUs can be enabled on boot. This assumes that the PSCI firmware
> has been loaded during the initial bootstrap on the device before the
> kernel starts (which is typically the case for these platforms). The
> PSCI firmware version is set to v0.2 which aligns with the current
> shipping version for Tegra.

This seems fine, although I'd expect PSCI to be used everywhere on 
Tegra, so putting this in tegra210.dtsi would make more sense.

[PATCH] arm64: tegra: Add CPU and PSCI nodes for NVIDIA Tegra210 platforms

[Stephen Warren]

On 03/28/2017 05:48 AM, Jon Hunter wrote:
> Add the CPU and PSCI nodes for the NVIDIA Tegra210 platforms so that
> all CPUs can be enabled on boot. This assumes that the PSCI firmware
> has been loaded during the initial bootstrap on the device before the
> kernel starts (which is typically the case for these platforms). The
> PSCI firmware version is set to v0.2 which aligns with the current
> shipping version for Tegra.

This seems fine, although I'd expect PSCI to be used everywhere on 
Tegra, so putting this in tegra210.dtsi would make more sense.

Re: [PATCH] arm64: tegra: Add CPU and PSCI nodes for NVIDIA Tegra210 platforms

[Jon Hunter]

On 28/03/17 17:23, Stephen Warren wrote:
> On 03/28/2017 05:48 AM, Jon Hunter wrote:
>> Add the CPU and PSCI nodes for the NVIDIA Tegra210 platforms so that
>> all CPUs can be enabled on boot. This assumes that the PSCI firmware
>> has been loaded during the initial bootstrap on the device before the
>> kernel starts (which is typically the case for these platforms). The
>> PSCI firmware version is set to v0.2 which aligns with the current
>> shipping version for Tegra.
> 
> This seems fine, although I'd expect PSCI to be used everywhere on
> Tegra, so putting this in tegra210.dtsi would make more sense.

It's fine with me. Although technically, tegra210-smaug ships with
psci-v1.0 and tegra210-jetson-tx1 currently have psci-v0.2. However, I
did test both with the psci version set to v1.0 and the jetson-tx1, did
detect the version automatically and reverted to v0.2 (which is a
feature of psci >= v0.2). For Tegra186 we also have the psci node in the
tegra186-p3310.dtsi.

Jon

-- 
nvpublic
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH] arm64: tegra: Add CPU and PSCI nodes for NVIDIA Tegra210 platforms

[Jon Hunter]

On 28/03/17 17:23, Stephen Warren wrote:
> On 03/28/2017 05:48 AM, Jon Hunter wrote:
>> Add the CPU and PSCI nodes for the NVIDIA Tegra210 platforms so that
>> all CPUs can be enabled on boot. This assumes that the PSCI firmware
>> has been loaded during the initial bootstrap on the device before the
>> kernel starts (which is typically the case for these platforms). The
>> PSCI firmware version is set to v0.2 which aligns with the current
>> shipping version for Tegra.
> 
> This seems fine, although I'd expect PSCI to be used everywhere on
> Tegra, so putting this in tegra210.dtsi would make more sense.

It's fine with me. Although technically, tegra210-smaug ships with
psci-v1.0 and tegra210-jetson-tx1 currently have psci-v0.2. However, I
did test both with the psci version set to v1.0 and the jetson-tx1, did
detect the version automatically and reverted to v0.2 (which is a
feature of psci >= v0.2). For Tegra186 we also have the psci node in the
tegra186-p3310.dtsi.

Jon

-- 
nvpublic

Re: [PATCH] arm64: tegra: Add CPU and PSCI nodes for NVIDIA Tegra210 platforms

[Mark Rutland]

On Tue, Mar 28, 2017 at 05:49:41PM +0100, Jon Hunter wrote:
> 
> On 28/03/17 17:23, Stephen Warren wrote:
> > On 03/28/2017 05:48 AM, Jon Hunter wrote:
> >> Add the CPU and PSCI nodes for the NVIDIA Tegra210 platforms so that
> >> all CPUs can be enabled on boot. This assumes that the PSCI firmware
> >> has been loaded during the initial bootstrap on the device before the
> >> kernel starts (which is typically the case for these platforms). The
> >> PSCI firmware version is set to v0.2 which aligns with the current
> >> shipping version for Tegra.
> > 
> > This seems fine, although I'd expect PSCI to be used everywhere on
> > Tegra, so putting this in tegra210.dtsi would make more sense.
> 
> It's fine with me. Although technically, tegra210-smaug ships with
> psci-v1.0 and tegra210-jetson-tx1 currently have psci-v0.2. However, I
> did test both with the psci version set to v1.0 and the jetson-tx1, did
> detect the version automatically and reverted to v0.2 (which is a
> feature of psci >= v0.2). 

Please don't rely upon that.

If the DT lists 0.2 and the FW reports 1.0 we deliberately upgrade and
treat it as 1.0, but the other way around was not a deliberate decision.

If the FW is not necessarily 1.0, please do not list 1.0 in the DT.

Thanks,
Mark.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH] arm64: tegra: Add CPU and PSCI nodes for NVIDIA Tegra210 platforms

[Mark Rutland]

On Tue, Mar 28, 2017 at 05:49:41PM +0100, Jon Hunter wrote:
> 
> On 28/03/17 17:23, Stephen Warren wrote:
> > On 03/28/2017 05:48 AM, Jon Hunter wrote:
> >> Add the CPU and PSCI nodes for the NVIDIA Tegra210 platforms so that
> >> all CPUs can be enabled on boot. This assumes that the PSCI firmware
> >> has been loaded during the initial bootstrap on the device before the
> >> kernel starts (which is typically the case for these platforms). The
> >> PSCI firmware version is set to v0.2 which aligns with the current
> >> shipping version for Tegra.
> > 
> > This seems fine, although I'd expect PSCI to be used everywhere on
> > Tegra, so putting this in tegra210.dtsi would make more sense.
> 
> It's fine with me. Although technically, tegra210-smaug ships with
> psci-v1.0 and tegra210-jetson-tx1 currently have psci-v0.2. However, I
> did test both with the psci version set to v1.0 and the jetson-tx1, did
> detect the version automatically and reverted to v0.2 (which is a
> feature of psci >= v0.2). 

Please don't rely upon that.

If the DT lists 0.2 and the FW reports 1.0 we deliberately upgrade and
treat it as 1.0, but the other way around was not a deliberate decision.

If the FW is not necessarily 1.0, please do not list 1.0 in the DT.

Thanks,
Mark.

Re: [PATCH] arm64: tegra: Add CPU and PSCI nodes for NVIDIA Tegra210 platforms

[Vagrant Cascadian]

[-- Attachment #1.1: Type: text/plain, Size: 2289 bytes --]

On 2017-03-28, Jon Hunter wrote:
> Add the CPU and PSCI nodes for the NVIDIA Tegra210 platforms so that
> all CPUs can be enabled on boot. This assumes that the PSCI firmware
> has been loaded during the initial bootstrap on the device before the
> kernel starts (which is typically the case for these platforms). The
> PSCI firmware version is set to v0.2 which aligns with the current
> shipping version for Tegra.
>
> Reported-by: Martin Michlmayr <tbm@cyrius.com>
> Signed-off-by: Jon Hunter <jonathanh@nvidia.com>

Tested on a jetson-tx1; all CPUs were recognized.

Tested-By: Vagrant Cascadian <vagrant@debian.org>

> ---
>  arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi | 23 +++++++++++++++++++++++
>  arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi | 24 ++++++++++++++++++++++++
>  2 files changed, 47 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
> index 906fb836d241..de1696c28140 100644
> --- a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
> +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
> @@ -296,6 +296,29 @@
>  		};
>  	};
>  
> +	cpus {
> +		cpu@0 {
> +			enable-method = "psci";
> +		};
> +
> +		cpu@1 {
> +			enable-method = "psci";
> +		};
> +
> +		cpu@2 {
> +			enable-method = "psci";
> +		};
> +
> +		cpu@3 {
> +			enable-method = "psci";
> +		};
> +	};
> +
> +	psci {
> +		compatible = "arm,psci-0.2";
> +		method = "smc";
> +	};
> +
>  	regulators {
>  		vdd_gpu: regulator@100 {
>  			compatible = "pwm-regulator";
> diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi
> index 0ec92578cacb..67cb039965fd 100644
> --- a/arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi
> +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi
> @@ -51,4 +51,28 @@
>  			clock-frequency = <32768>;
>  		};
>  	};
> +
> +	cpus {
> +		cpu@0 {
> +			enable-method = "psci";
> +		};
> +
> +		cpu@1 {
> +			enable-method = "psci";
> +		};
> +
> +		cpu@2 {
> +			enable-method = "psci";
> +		};
> +
> +		cpu@3 {
> +			enable-method = "psci";
> +		};
> +	};
> +
> +	psci {
> +		compatible = "arm,psci-0.2";
> +		method = "smc";
> +	};
> +
>  };
> -- 
> 2.7.4

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 832 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH] arm64: tegra: Add CPU and PSCI nodes for NVIDIA Tegra210 platforms

[Vagrant Cascadian]

On 2017-03-28, Jon Hunter wrote:
> Add the CPU and PSCI nodes for the NVIDIA Tegra210 platforms so that
> all CPUs can be enabled on boot. This assumes that the PSCI firmware
> has been loaded during the initial bootstrap on the device before the
> kernel starts (which is typically the case for these platforms). The
> PSCI firmware version is set to v0.2 which aligns with the current
> shipping version for Tegra.
>
> Reported-by: Martin Michlmayr <tbm@cyrius.com>
> Signed-off-by: Jon Hunter <jonathanh@nvidia.com>

Tested on a jetson-tx1; all CPUs were recognized.

Tested-By: Vagrant Cascadian <vagrant@debian.org>

> ---
>  arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi | 23 +++++++++++++++++++++++
>  arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi | 24 ++++++++++++++++++++++++
>  2 files changed, 47 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
> index 906fb836d241..de1696c28140 100644
> --- a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
> +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
> @@ -296,6 +296,29 @@
>  		};
>  	};
>  
> +	cpus {
> +		cpu at 0 {
> +			enable-method = "psci";
> +		};
> +
> +		cpu at 1 {
> +			enable-method = "psci";
> +		};
> +
> +		cpu at 2 {
> +			enable-method = "psci";
> +		};
> +
> +		cpu at 3 {
> +			enable-method = "psci";
> +		};
> +	};
> +
> +	psci {
> +		compatible = "arm,psci-0.2";
> +		method = "smc";
> +	};
> +
>  	regulators {
>  		vdd_gpu: regulator at 100 {
>  			compatible = "pwm-regulator";
> diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi
> index 0ec92578cacb..67cb039965fd 100644
> --- a/arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi
> +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi
> @@ -51,4 +51,28 @@
>  			clock-frequency = <32768>;
>  		};
>  	};
> +
> +	cpus {
> +		cpu at 0 {
> +			enable-method = "psci";
> +		};
> +
> +		cpu at 1 {
> +			enable-method = "psci";
> +		};
> +
> +		cpu at 2 {
> +			enable-method = "psci";
> +		};
> +
> +		cpu at 3 {
> +			enable-method = "psci";
> +		};
> +	};
> +
> +	psci {
> +		compatible = "arm,psci-0.2";
> +		method = "smc";
> +	};
> +
>  };
> -- 
> 2.7.4
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 832 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20170408/ff6044d6/attachment.sig>