[00/85] 3.2.49-rc1 review

[00/85] 3.2.49-rc1 review

[Ben Hutchings]

This is the start of the stable review cycle for the 3.2.49 release.
There are 85 patches in this series, which will be posted as responses
to this one.  If anyone has any issues with these being applied, please
let me know.

I have not yet looked at any commits cc'd to stable that are not in
v3.11-rc1.  Any fixes that went into v3.11-rc2 or later should appear
in the next review if they are applicable.

Responses should be made by Fri Jul 26 14:00:00 UTC 2013.
Anything received after that time might be too late.

A combined patch relative to 3.2.48 will be posted as an additional
response to this.  A shortlog and diffstat can be found below.

Ben.

-------------

Al Viro (1):
      ext3,ext4: don't mess with dir_file->f_pos in htree_dirblock_to_tree()
         [64cb927371cd2ec43758d8a094a003d27bc3d0dc]

Alex Williamson (1):
      iommu/amd: Only unmap large pages from the first pte
         [60d0ca3cfd199b6612bbbbf4999a3470dad38bb1]

Anderson Lizardo (1):
      Bluetooth: Fix crash in l2cap_build_cmd() with small MTU
         [300b962e5244a1ea010df7e88595faa0085b461d]

Artem Bityutskiy (2):
      UBIFS: fix a horrid bug
         [605c912bb843c024b1ed173dc427cd5c08e5d54d]
      UBIFS: prepare to fix a horrid bug
         [33f1a63ae84dfd9ad298cf275b8f1887043ced36]

Axel Lin (1):
      drivers/rtc/rtc-rv3029c2.c: fix disabling AIE irq
         [29ecd78c0fd6ee05f2c6b07b23823a6ae43c13ff]

Bart Van Assche (1):
      timer: Fix jiffies wrap behavior of round_jiffies_common()
         [9e04d3804d3ac97d8c03a41d78d0f0674b5d01e1]

Bartlomiej Zolnierkiewicz (1):
      drivers/dma/pl330.c: fix locking in pl330_free_chan_resources()
         [da331ba8e9c5de72a27e50f71105395bba6eebe0]

Ben Hutchings (3):
      [SCSI] sd: Fix parsing of 'temporary ' cache mode prefix
         [2ee3e26c673e75c05ef8b914f54fadee3d7b9c88]
      genirq: Fix can_request_irq() for IRQs without an action
         [2779db8d37d4b542d9ca2575f5f178dbeaca6c86]
      r8169: fix offloaded tx checksum for small packets.
         [not upstream; fixes effective mis-merge in 3.2]

Bjørn Mork (1):
      [SCSI] megaraid_sas: fix memory leak if SGL has zero length entries
         [7a6a731bd00ca90d0e250867c3b9c05b5ff0fa49]

Chen Gang (1):
      powerpc/smp: Section mismatch from smp_release_cpus to __initdata spinning_secondaries
         [8246aca7058f3f2c2ae503081777965cd8df7b90]

Dan Williams (1):
      USB: option,qcserial: move Novatel Gobi1K IDs to qcserial
         [a254810a86aaaac4ac6ba44fa934558b042a17a7]

Daniel Hansel (1):
      [SCSI] zfcp: fix adapter (re)open recovery while link to SAN is down
         [f76ccaac4f82c463a037aa4a1e4ccb85c7011814]

Dirk Hohndel (1):
      HID: Add support for the MacBook Pro 10,2 keyboard / touchpad
         [8d80da90f53d37cf6caefc61353e1cc3a145b9e0]

Dmitry Torokhov (2):
      HID: apple: Add support for the 2013 Macbook Air
         [9d9a04ee758b4c1fcc7586d065cdde7a7607e156]
      Input: bcm5974 - add support for the 2013 MacBook Air
         [148c1c8ad3c4170186ebe6ea5900adde27d2a0e7]

Gavin Shan (1):
      net/tg3: Avoid delay during MMIO access
         [6d446ec32f169c6a5d9bc90684a8082a6cbe90f6]

Greg KH (1):
      MAINTAINERS: Greg's suse email address is dead
         [879a5a001b62a020e074d460b3a7c0fd993f9832]

Greg Kroah-Hartman (2):
      MAINTAINERS: add stable_kernel_rules.txt to stable maintainer information
         [7b175c46720f8e6b92801bb634c93d1016f80c62]
      Revert "serial: 8250_pci: add support for another kind of NetMos Technology PCI 9835 Multi-I/O Controller"
         [828c6a102b1f2b8583fadc0e779c46b31d448f0b]

Hauke Mehrtens (1):
      b43: ensue that BCMA is "y" when B43 is "y"
         [693026ef2e751fd94d2e6c71028e68343cc875d5]

J. Bruce Fields (1):
      nfsd4: fix decoding of compounds across page boundaries
         [247500820ebd02ad87525db5d9b199e5b66f6636]

Jaganath Kanakkassery (1):
      Bluetooth: Fix invalid length check in l2cap_information_rsp()
         [3f6fa3d489e127ca5a5b298eabac3ff5dbe0e112]

James Bottomley (1):
      [SCSI] sd: fix array cache flushing bug causing performance problems
         [39c60a0948cc06139e2fbfe084f83cb7e7deae3b]

Jan Kara (3):
      ext4: fix data offset overflow in ext4_xattr_fiemap() on 32-bit archs
         [a60697f411eb365fb09e639e6f183fe33d1eb796]
      ext4: fix overflow when counting used blocks on 32-bit architectures
         [8af8eecc1331dbf5e8c662022272cf667e213da5]
      writeback: Fix periodic writeback after fs mount
         [a5faeaf9109578e65e1a32e2a3e76c8b47e7dcb6]

Jason Wang (1):
      drivers: hv: switch to use mb() instead of smp_mb()
         [35848f68b07df3f917cb13fc3c134718669f569b]

Jed Davis (1):
      ARM: 7765/1: perf: Record the user-mode PC in the call chain.
         [c5f927a6f62196226915f12194c9d0df4e2210d7]

Jiang Liu (5):
      zram: avoid access beyond the zram device
         [12a7ad3b810e77137d0caf97a6dd97591e075b30]
      zram: avoid invalid memory access in zram_exit()
         [6030ea9b35971a4200062f010341ab832e878ac9]
      zram: destroy all devices on error recovery path in zram_init()
         [39a9b8ac9333e4268ecff7da6c9d1ab3823ff243]
      zram: protect sysfs handler from invalid memory access
         [5863e10b441e7ea4b492f930f1be180a97d026f3]
      zram: use zram->lock to protect zram_free_page() in swap free notify path
         [57ab048532c0d975538cebd4456491b5c34248f4]

Jiri Olsa (2):
      perf: Clone child context from parent context pmu
         [734df5ab549ca44f40de0f07af1c8803856dfb18]
      perf: Remove WARN_ON_ONCE() check in __perf_event_enable() for valid scenario
         [06f417968beac6e6b614e17b37d347aa6a6b1d30]

Jonathan Salwan (1):
      drivers/cdrom/cdrom.c: use kzalloc() for failing hardware
         [542db01579fbb7ea7d1f7bb9ddcef1559df660b2]

Junxiao Bi (1):
      ocfs2: xattr: fix inlined xattr reflink
         [ef962df057aaafd714f5c22ba3de1be459571fdf]

Jörn Engel (1):
      iscsi-target: Fix tfc_tpg_nacl_auth_cit configfs length overflow
         [0fbfc46fb0b2f543a8b539e94c6c293ebc0b05a6]

Kees Cook (2):
      block: do not pass disk names as format strings
         [ffc8b30866879ed9ba62bd0a86fecdbd51cd3d19]
      crypto: sanitize argument for format string
         [1c8fca1d92e14859159a82b8a380d220139b7344]

Larry Finger (2):
      rtlwifi: rtl8192cu: Add new USB ID for TP-Link TL-WN8200ND
         [c4d827c5ccc3a49227dbf9d4b248a2e86f388023]
      rtlwifi: rtl8192cu: Fix duplicate if test
         [10d0b9030a3f86e1e26c710c7580524d7787d688]

Laszlo Ersek (1):
      xen/time: remove blocked time accounting from xen "clockchip"
         [0b0c002c340e78173789f8afaa508070d838cf3d]

Liang Li (1):
      pch_uart: fix a deadlock when pch_uart as console
         [384e301e3519599b000c1a2ecd938b533fc15d85]

Marcelo Tosatti (1):
      vgacon.c: add cond reschedule points in vgacon_do_font_op
         [7e6d72c15ff4cc0c27573901bb05f9eddbd71ed4]

Mathias Nyman (1):
      xhci: check for failed dma pool allocation
         [025f880cb2e4d7218d0422d4b07bea1a68959c38]

Mikulas Patocka (1):
      hpfs: better test for errors
         [3ebacb05044f82c5f0bb456a894eb9dc57d0ed90]

Nicolin Chen (1):
      ASoC: wm8962: Remove remaining direct register cache accesses
         [2e7ee15ced914e109a1a5b6dfcd463d846a13bd5]

Oleg Nesterov (1):
      hw_breakpoint: Use cpu_possible_mask in {reserve,release}_bp_slot()
         [c790b0ad23f427c7522ffed264706238c57c007e]

Paul Clements (1):
      nbd: correct disconnect behavior
         [c378f70adbc1bbecd9e6db145019f14b2f688c7c]

Peter Zijlstra (3):
      perf: Fix mmap() accounting hole
         [9bb5d40cd93c9dd4be74834b1dcb1ba03629716b]
      perf: Fix perf mmap bugs
         [26cb63ad11e04047a64309362674bcbbd6a6f246]
      perf: Fix perf_lock_task_context() vs RCU
         [058ebd0eba3aff16b144eabf4510ed9510e1416e]

Rajkumar Manoharan (1):
      ath9k: fill channel mode in caldata
         [77d848372875d2e4cbdbf07030f0e08cab5e7f4d]

Sage Weil (1):
      ceph: fix statvfs fr_size
         [92a49fb0f79f3300e6e50ddf56238e70678e4202]

Seth Heasley (2):
      ahci: AHCI-mode SATA patch for Intel Coleto Creek DeviceIDs
         [1cfc7df3de10c40ed459e13cce6de616023bf41c]
      ata_piix: IDE-mode SATA patch for Intel Coleto Creek DeviceIDs
         [c7e8695bfa0611b39493a9dfe8bab9f63f9809bd]

Shane Huang (3):
      ahci: Add AMD CZ SATA device ID
         [fafe5c3d82a470d73de53e6b08eb4e28d974d895]
      ahci: remove pmp link online check in FBS EH
         [912b9ac683b112615d5605686f1dc086402ce9f7]
      i2c-piix4: Add AMD CZ SMBus device ID
         [b996ac90f595dda271cbd858b136b45557fc1a57]

Soeren Moch (1):
      [media] media: dmxdev: remove dvb_ringbuffer_flush() on writer side
         [414abbd2cd4c2618895f02ed3a76ec6647281436]

Sreekanth Reddy (3):
      [SCSI] mpt2sas: Fix for device scan following host reset could get stuck in a infinite loop
         [6241f22ca12a26ee149cbe31b27bac97dbdc8bc4]
      [SCSI] mpt2sas: Fix for issue Missing delay not getting set during system bootup
         [b0df96a0068daee4f9c2189c29b9053eb6e46b17]
      [SCSI] mpt2sas: fix firmware failure with wrong task attribute
         [48ba2efc382f94fae16ca8ca011e5961a81ad1ea]

Steffen Maier (2):
      [SCSI] zfcp: block queue limits with data router
         [5fea4291deacd80188b996d2f555fc6a1940e5d4]
      [SCSI] zfcp: status read buffers on first adapter open with link down
         [9edf7d75ee5f21663a0183d21f702682d0ef132f]

Stephane Eranian (1):
      perf: Disable monitoring on setuid processes for regular users
         [2976b10f05bd7f6dab9f9e7524451ddfed656a89]

Steve French (1):
      Handle big endianness in NTLM (ntlmv2) authentication
         [fdf96a907c1fbb93c633e2b7ede3b8df26d6a4c0]

Sujith Manoharan (3):
      ath9k: Do not assign noise for NULL caldata
         [d3bcb7b24bbf09fde8405770e676fe0c11c79662]
      ath9k: Fix noisefloor calibration
         [696df78509d1f81b651dd98ecdc1aecab616db6b]
      ath9k_hw: Assign default xlna config for AR9485
         [30d5b709da23f4ab9836c7f66d2d2e780a69cf12]

Takashi Iwai (1):
      ALSA: hda - Cache the MUX selection for generic HDMI
         [bddee96b5d0db869f47b195fe48c614ca824203c]

Tejun Heo (2):
      cgroup: fix RCU accesses to task->cgroups
         [14611e51a57df10240817d8ada510842faf0ec51]
      libata: skip SRST for all SIMG [34]7x port-multipliers
         [7a87718d92760fc688628ad6a430643dafa16f1f]

Theodore Ts'o (1):
      jbd2: fix theoretical race in jbd2__journal_restart
         [39c04153fda8c32e85b51c96eb5511a326ad7609]

Tyler Hicks (1):
      libceph: Fix NULL pointer dereference in auth client code
         [2cb33cac622afde897aa02d3dcd9fbba8bae839e]

UCHINO Satoshi (1):
      usb: gadget: f_mass_storage: add missing memory barrier for thread_wakeup_needed
         [d68c277b501889b3a50c179d1c3d704db7947b83]

Yitian Bu (1):
      printk: Fix rq->lock vs logbuf_lock unlock lock inversion
         [dbda92d16f8655044e082930e4e9d244b87fde77]

Zefan Li (2):
      dlci: acquire rtnl_lock before calling __dev_get_by_name()
         [11eb2645cbf38a08ae491bf6c602eea900ec0bb5]
      dlci: validate the net device in dlci_del()
         [578a1310f2592ba90c5674bca21c1dbd1adf3f0a]

Zhang Yi (1):
      futex: Take hugepages into account when generating futex_key
         [13d60f4b6ab5b702dc8d2ee20999f98a93728aec]

Zhangwei (1):
      tracing: Fix irqs-off tag display in syscall tracing
         [11034ae9c20f4057a6127fc965906417978e69b2]

 Documentation/i2c/busses/i2c-piix4             |   2 +-
 MAINTAINERS                                    |  30 +--
 Makefile                                       |   4 +-
 arch/arm/kernel/perf_event.c                   |   1 +
 arch/powerpc/kernel/setup_64.c                 |   2 +-
 arch/x86/xen/time.c                            |  17 +-
 block/genhd.c                                  |   2 +-
 crypto/algapi.c                                |   3 +-
 drivers/ata/ahci.c                             |   2 +
 drivers/ata/ata_piix.c                         |   2 +
 drivers/ata/libahci.c                          |   3 +-
 drivers/ata/libata-pmp.c                       |  33 ++--
 drivers/block/nbd.c                            |  10 +-
 drivers/cdrom/cdrom.c                          |   2 +-
 drivers/dma/pl330.c                            |   4 +-
 drivers/hid/hid-apple.c                        |  12 ++
 drivers/hid/hid-core.c                         |  12 ++
 drivers/hid/hid-ids.h                          |   6 +
 drivers/hv/ring_buffer.c                       |   2 +-
 drivers/hv/vmbus_drv.c                         |   2 +-
 drivers/i2c/busses/Kconfig                     |   1 +
 drivers/i2c/busses/i2c-piix4.c                 |   3 +-
 drivers/input/mouse/bcm5974.c                  |  55 +++++-
 drivers/iommu/amd_iommu.c                      |   6 +-
 drivers/media/dvb/dvb-core/dmxdev.c            |   8 +-
 drivers/net/ethernet/broadcom/tg3.c            |  38 ++++
 drivers/net/ethernet/realtek/r8169.c           |   8 -
 drivers/net/wan/dlci.c                         |  26 ++-
 drivers/net/wireless/ath/ath9k/ar9003_eeprom.c |   8 +-
 drivers/net/wireless/ath/ath9k/ar9003_phy.h    |   2 +
 drivers/net/wireless/ath/ath9k/calib.c         |   2 +-
 drivers/net/wireless/ath/ath9k/hw.c            |   3 +-
 drivers/net/wireless/ath/ath9k/hw.h            |   1 +
 drivers/net/wireless/ath/ath9k/main.c          |   7 -
 drivers/net/wireless/b43/Kconfig               |   4 +-
 drivers/net/wireless/rtlwifi/rtl8192cu/rf.c    |   2 +-
 drivers/net/wireless/rtlwifi/rtl8192cu/sw.c    |   1 +
 drivers/pci/quirks.c                           |   2 +
 drivers/rtc/rtc-rv3029c2.c                     |   2 +-
 drivers/s390/scsi/zfcp_aux.c                   |   5 +-
 drivers/s390/scsi/zfcp_fsf.c                   |  25 ++-
 drivers/s390/scsi/zfcp_scsi.c                  |  10 +-
 drivers/scsi/megaraid/megaraid_sas_base.c      |  10 +-
 drivers/scsi/mpt2sas/mpt2sas_base.c            |  13 +-
 drivers/scsi/mpt2sas/mpt2sas_base.h            |   3 +
 drivers/scsi/mpt2sas/mpt2sas_scsih.c           | 132 ++++++++++++-
 drivers/scsi/osd/osd_uld.c                     |   2 +-
 drivers/scsi/sd.c                              |  20 ++
 drivers/scsi/sd.h                              |   1 +
 drivers/staging/zram/zram_drv.c                |  36 ++--
 drivers/staging/zram/zram_drv.h                |   5 +-
 drivers/staging/zram/zram_sysfs.c              |   2 +
 drivers/target/iscsi/iscsi_target_configfs.c   |   2 +-
 drivers/tty/serial/8250_pci.c                  |   4 -
 drivers/tty/serial/pch_uart.c                  |  29 ++-
 drivers/usb/gadget/f_mass_storage.c            |   2 +
 drivers/usb/host/xhci-mem.c                    |   4 +
 drivers/usb/serial/option.c                    |   4 -
 drivers/usb/serial/qcserial.c                  |   8 +-
 drivers/video/console/vgacon.c                 |  17 +-
 fs/block_dev.c                                 |   9 +-
 fs/ceph/super.c                                |   7 +-
 fs/ceph/super.h                                |   2 +-
 fs/cifs/cifs_unicode.h                         |   8 +-
 fs/cifs/cifsencrypt.c                          |   6 +-
 fs/exec.c                                      |  16 +-
 fs/ext3/namei.c                                |   7 +-
 fs/ext4/extents.c                              |   4 +-
 fs/ext4/inode.c                                |   4 +-
 fs/ext4/namei.c                                |   7 +-
 fs/hpfs/map.c                                  |   3 +-
 fs/hpfs/super.c                                |   8 +-
 fs/jbd2/transaction.c                          |   2 +-
 fs/nfsd/nfs4xdr.c                              |   2 +-
 fs/ocfs2/xattr.c                               |  10 +
 fs/ubifs/dir.c                                 |  54 ++++--
 include/linux/cgroup.h                         |  52 ++++-
 include/linux/hugetlb.h                        |  16 ++
 include/linux/nbd.h                            |   1 +
 include/linux/perf_event.h                     |   3 +-
 kernel/events/core.c                           | 258 ++++++++++++++++++-------
 kernel/events/hw_breakpoint.c                  |   4 +-
 kernel/events/internal.h                       |   4 +
 kernel/futex.c                                 |   3 +-
 kernel/irq/manage.c                            |   6 +-
 kernel/printk.c                                |   2 +-
 kernel/timer.c                                 |   8 +-
 kernel/trace/trace_syscalls.c                  |  21 +-
 mm/hugetlb.c                                   |  17 ++
 net/bluetooth/l2cap_core.c                     |   5 +-
 net/ceph/auth_none.c                           |   6 +
 sound/pci/hda/patch_hdmi.c                     |   2 +-
 sound/soc/codecs/wm8962.c                      |  24 +--
 93 files changed, 918 insertions(+), 327 deletions(-)

-- 
Ben Hutchings
Once a job is fouled up, anything done to improve it makes it worse.

[01/85] r8169: fix offloaded tx checksum for small packets.

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Ben Hutchings <ben@decadent.org.uk>

The workaround introduced by commit e5195c1f31f3 'r8169: fix 8168evl
frame padding.' upstream was incorrect and was entirely replaced in
commit b423e9ae49d7 'r8169: fix offloaded tx checksum for small
packets.'

On the 3.2.y branch, the first commit has effectively been applied
twice: the first time by itself, and the second time in commit
3cf40360f431 which squashed the two upstream commits together.  That
left us with both the incorrect and the correct workaround in place.
Remove the incorrect one.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Francois Romieu <romieu@fr.zoreil.com>
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -5584,14 +5584,6 @@ static netdev_tx_t rtl8169_start_xmit(st
 		goto err_stop_0;
 	}
 
-	/* 8168evl does not automatically pad to minimum length. */
-	if (unlikely(tp->mac_version == RTL_GIGA_MAC_VER_34 &&
-		     skb->len < ETH_ZLEN)) {
-		if (skb_padto(skb, ETH_ZLEN))
-			goto err_update_stats;
-		skb_put(skb, ETH_ZLEN - skb->len);
-	}
-
 	if (unlikely(le32_to_cpu(txd->opts1) & DescOwn))
 		goto err_stop_0;
 

[12/85] zram: protect sysfs handler from invalid memory access

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Jiang Liu <liuj97@gmail.com>

commit 5863e10b441e7ea4b492f930f1be180a97d026f3 upstream.

Use zram->init_lock to protect access to zram->meta, otherwise it
may cause invalid memory access if zram->meta has been freed by
zram_reset_device().

This issue may be triggered by:
Thread 1:
while true; do cat mem_used_total; done
Thread 2:
while true; do echo 8M > disksize; echo 1 > reset; done

Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/staging/zram/zram_sysfs.c | 2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/staging/zram/zram_sysfs.c
+++ b/drivers/staging/zram/zram_sysfs.c
@@ -186,10 +186,12 @@ static ssize_t mem_used_total_show(struc
 	u64 val = 0;
 	struct zram *zram = dev_to_zram(dev);
 
+	down_read(&zram->init_lock);
 	if (zram->init_done) {
 		val = xv_get_total_size_bytes(zram->mem_pool) +
 			((u64)(zram->stats.pages_expand) << PAGE_SHIFT);
 	}
+	up_read(&zram->init_lock);
 
 	return sprintf(buf, "%llu\n", val);
 }

[14/85] usb: gadget: f_mass_storage: add missing memory barrier for thread_wakeup_needed

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: UCHINO Satoshi <satoshi.uchino@toshiba.co.jp>

commit d68c277b501889b3a50c179d1c3d704db7947b83 upstream.

Without this memory barrier, the file-storage thread may fail to
escape from the following while loop, because it may observe new
common->thread_wakeup_needed and old bh->state which are updated by
the callback functions.

	/* Wait for the CBW to arrive */
	while (bh->state != BUF_STATE_FULL) {
		rc = sleep_thread(common);
		if (rc)
			return rc;
	}

Signed-off-by: UCHINO Satoshi <satoshi.uchino@toshiba.co.jp>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/usb/gadget/f_mass_storage.c | 2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/usb/gadget/f_mass_storage.c
+++ b/drivers/usb/gadget/f_mass_storage.c
@@ -512,6 +512,7 @@ static int fsg_set_halt(struct fsg_dev *
 /* Caller must hold fsg->lock */
 static void wakeup_thread(struct fsg_common *common)
 {
+	smp_wmb();	/* ensure the write of bh->state is complete */
 	/* Tell the main thread that something has happened */
 	common->thread_wakeup_needed = 1;
 	if (common->thread_task)
@@ -731,6 +732,7 @@ static int sleep_thread(struct fsg_commo
 	}
 	__set_current_state(TASK_RUNNING);
 	common->thread_wakeup_needed = 0;
+	smp_rmb();	/* ensure the latest bh->state is visible */
 	return rc;
 }
 

[33/85] iommu/amd: Only unmap large pages from the first pte

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Williamson <alex.williamson@redhat.com>

commit 60d0ca3cfd199b6612bbbbf4999a3470dad38bb1 upstream.

If we use a large mapping, the expectation is that only unmaps from
the first pte in the superpage are supported.  Unmaps from offsets
into the superpage should fail (ie. return zero sized unmap).  In the
current code, unmapping from an offset clears the size of the full
mapping starting from an offset.  For instance, if we map a 16k
physically contiguous range at IOVA 0x0 with a large page, then
attempt to unmap 4k at offset 12k, 4 ptes are cleared (12k - 28k) and
the unmap returns 16k unmapped.  This potentially incorrectly clears
valid mappings and confuses drivers like VFIO that use the unmap size
to release pinned pages.

Fix by refusing to unmap from offsets into the page.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/iommu/amd_iommu.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/drivers/iommu/amd_iommu.c
+++ b/drivers/iommu/amd_iommu.c
@@ -1076,6 +1076,10 @@ static unsigned long iommu_unmap_page(st
 
 			/* Large PTE found which maps this address */
 			unmap_size = PTE_PAGE_SIZE(*pte);
+
+			/* Only unmap from the first pte in the page */
+			if ((unmap_size - 1) & bus_addr)
+				break;
 			count      = PAGE_SIZE_PTE_COUNT(unmap_size);
 			for (i = 0; i < count; i++)
 				pte[i] = 0ULL;
@@ -1085,7 +1089,7 @@ static unsigned long iommu_unmap_page(st
 		unmapped += unmap_size;
 	}
 
-	BUG_ON(!is_power_of_2(unmapped));
+	BUG_ON(unmapped && !is_power_of_2(unmapped));
 
 	return unmapped;
 }

[60/85] tracing: Fix irqs-off tag display in syscall tracing

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: "zhangwei(Jovi)" <jovi.zhangwei@huawei.com>

commit 11034ae9c20f4057a6127fc965906417978e69b2 upstream.

All syscall tracing irqs-off tags are wrong, the syscall enter entry doesn't
disable irqs.

 [root@jovi tracing]#echo "syscalls:sys_enter_open" > set_event
 [root@jovi tracing]# cat trace
 # tracer: nop
 #
 # entries-in-buffer/entries-written: 13/13   #P:2
 #
 #                              _-----=> irqs-off
 #                             / _----=> need-resched
 #                            | / _---=> hardirq/softirq
 #                            || / _--=> preempt-depth
 #                            ||| /     delay
 #           TASK-PID   CPU#  ||||    TIMESTAMP  FUNCTION
 #              | |       |   ||||       |         |
       irqbalance-513   [000] d... 56115.496766: sys_open(filename: 804e1a6, flags: 0, mode: 1b6)
       irqbalance-513   [000] d... 56115.497008: sys_open(filename: 804e1bb, flags: 0, mode: 1b6)
         sendmail-771   [000] d... 56115.827982: sys_open(filename: b770e6d1, flags: 0, mode: 1b6)

The reason is syscall tracing doesn't record irq_flags into buffer.
The proper display is:

 [root@jovi tracing]#echo "syscalls:sys_enter_open" > set_event
 [root@jovi tracing]# cat trace
 # tracer: nop
 #
 # entries-in-buffer/entries-written: 14/14   #P:2
 #
 #                              _-----=> irqs-off
 #                             / _----=> need-resched
 #                            | / _---=> hardirq/softirq
 #                            || / _--=> preempt-depth
 #                            ||| /     delay
 #           TASK-PID   CPU#  ||||    TIMESTAMP  FUNCTION
 #              | |       |   ||||       |         |
       irqbalance-514   [001] ....    46.213921: sys_open(filename: 804e1a6, flags: 0, mode: 1b6)
       irqbalance-514   [001] ....    46.214160: sys_open(filename: 804e1bb, flags: 0, mode: 1b6)
            <...>-920   [001] ....    47.307260: sys_open(filename: 4e82a0c5, flags: 80000, mode: 0)

Link: http://lkml.kernel.org/r/1365564393-10972-3-git-send-email-jovi.zhangwei@huawei.com

Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 kernel/trace/trace_syscalls.c | 21 +++++++++++++++++----
 1 file changed, 17 insertions(+), 4 deletions(-)

--- a/kernel/trace/trace_syscalls.c
+++ b/kernel/trace/trace_syscalls.c
@@ -303,6 +303,8 @@ void ftrace_syscall_enter(void *ignore,
 	struct syscall_metadata *sys_data;
 	struct ring_buffer_event *event;
 	struct ring_buffer *buffer;
+	unsigned long irq_flags;
+	int pc;
 	int size;
 	int syscall_nr;
 
@@ -318,8 +320,11 @@ void ftrace_syscall_enter(void *ignore,
 
 	size = sizeof(*entry) + sizeof(unsigned long) * sys_data->nb_args;
 
+	local_save_flags(irq_flags);
+	pc = preempt_count();
+
 	event = trace_current_buffer_lock_reserve(&buffer,
-			sys_data->enter_event->event.type, size, 0, 0);
+			sys_data->enter_event->event.type, size, irq_flags, pc);
 	if (!event)
 		return;
 
@@ -329,7 +334,8 @@ void ftrace_syscall_enter(void *ignore,
 
 	if (!filter_current_check_discard(buffer, sys_data->enter_event,
 					  entry, event))
-		trace_current_buffer_unlock_commit(buffer, event, 0, 0);
+		trace_current_buffer_unlock_commit(buffer, event,
+						   irq_flags, pc);
 }
 
 void ftrace_syscall_exit(void *ignore, struct pt_regs *regs, long ret)
@@ -338,6 +344,8 @@ void ftrace_syscall_exit(void *ignore, s
 	struct syscall_metadata *sys_data;
 	struct ring_buffer_event *event;
 	struct ring_buffer *buffer;
+	unsigned long irq_flags;
+	int pc;
 	int syscall_nr;
 
 	syscall_nr = syscall_get_nr(current, regs);
@@ -350,8 +358,12 @@ void ftrace_syscall_exit(void *ignore, s
 	if (!sys_data)
 		return;
 
+	local_save_flags(irq_flags);
+	pc = preempt_count();
+
 	event = trace_current_buffer_lock_reserve(&buffer,
-			sys_data->exit_event->event.type, sizeof(*entry), 0, 0);
+			sys_data->exit_event->event.type, sizeof(*entry),
+			irq_flags, pc);
 	if (!event)
 		return;
 
@@ -361,7 +373,8 @@ void ftrace_syscall_exit(void *ignore, s
 
 	if (!filter_current_check_discard(buffer, sys_data->exit_event,
 					  entry, event))
-		trace_current_buffer_unlock_commit(buffer, event, 0, 0);
+		trace_current_buffer_unlock_commit(buffer, event,
+						   irq_flags, pc);
 }
 
 int reg_event_syscall_enter(struct ftrace_event_call *call)

[79/85] perf: Fix mmap() accounting hole

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Peter Zijlstra <peterz@infradead.org>

commit 9bb5d40cd93c9dd4be74834b1dcb1ba03629716b upstream.

Vince's fuzzer once again found holes. This time it spotted a leak in
the locked page accounting.

When an event had redirected output and its close() was the last
reference to the buffer we didn't have a vm context to undo accounting.

Change the code to destroy the buffer on the last munmap() and detach
all redirected events at that time. This provides us the right context
to undo the vm accounting.

[Backporting for 3.4-stable.
VM_RESERVED flag was replaced with pair 'VM_DONTEXPAND | VM_DONTDUMP' in
314e51b9 since 3.7.0-rc1, and 314e51b9 comes from a big patchset, we didn't
backport the patchset, so I restored 'VM_DNOTEXPAND | VM_DONTDUMP' as before:
-	vma->vm_flags |= VM_DONTCOPY | VM_DONTEXPAND | VM_DONTDUMP;
+	vma->vm_flags |= VM_DONTCOPY | VM_RESERVED;
 -- zliu]

Reported-and-tested-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20130604084421.GI8923@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Zhouping Liu <zliu@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: drop unrelated addition of braces in free_event()]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 kernel/events/core.c     | 228 ++++++++++++++++++++++++++++++++---------------
 kernel/events/internal.h |   3 +-
 2 files changed, 159 insertions(+), 72 deletions(-)

--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -185,9 +185,6 @@ static void cpu_ctx_sched_in(struct perf
 static void update_context_time(struct perf_event_context *ctx);
 static u64 perf_event_time(struct perf_event *event);
 
-static void ring_buffer_attach(struct perf_event *event,
-			       struct ring_buffer *rb);
-
 void __weak perf_event_print_debug(void)	{ }
 
 extern __weak const char *perf_pmu_name(void)
@@ -2960,7 +2957,8 @@ static void free_event_rcu(struct rcu_he
 	kfree(event);
 }
 
-static bool ring_buffer_put(struct ring_buffer *rb);
+static void ring_buffer_put(struct ring_buffer *rb);
+static void ring_buffer_detach(struct perf_event *event, struct ring_buffer *rb);
 
 static void free_event(struct perf_event *event)
 {
@@ -2984,8 +2982,22 @@ static void free_event(struct perf_event
 	}
 
 	if (event->rb) {
-		ring_buffer_put(event->rb);
-		event->rb = NULL;
+		struct ring_buffer *rb;
+
+		/*
+		 * Can happen when we close an event with re-directed output.
+		 *
+		 * Since we have a 0 refcount, perf_mmap_close() will skip
+		 * over us; possibly making our ring_buffer_put() the last.
+		 */
+		mutex_lock(&event->mmap_mutex);
+		rb = event->rb;
+		if (rb) {
+			rcu_assign_pointer(event->rb, NULL);
+			ring_buffer_detach(event, rb);
+			ring_buffer_put(rb); /* could be last */
+		}
+		mutex_unlock(&event->mmap_mutex);
 	}
 
 	if (is_cgroup_event(event))
@@ -3223,30 +3235,13 @@ static unsigned int perf_poll(struct fil
 	unsigned int events = POLL_HUP;
 
 	/*
-	 * Race between perf_event_set_output() and perf_poll(): perf_poll()
-	 * grabs the rb reference but perf_event_set_output() overrides it.
-	 * Here is the timeline for two threads T1, T2:
-	 * t0: T1, rb = rcu_dereference(event->rb)
-	 * t1: T2, old_rb = event->rb
-	 * t2: T2, event->rb = new rb
-	 * t3: T2, ring_buffer_detach(old_rb)
-	 * t4: T1, ring_buffer_attach(rb1)
-	 * t5: T1, poll_wait(event->waitq)
-	 *
-	 * To avoid this problem, we grab mmap_mutex in perf_poll()
-	 * thereby ensuring that the assignment of the new ring buffer
-	 * and the detachment of the old buffer appear atomic to perf_poll()
+	 * Pin the event->rb by taking event->mmap_mutex; otherwise
+	 * perf_event_set_output() can swizzle our rb and make us miss wakeups.
 	 */
 	mutex_lock(&event->mmap_mutex);
-
-	rcu_read_lock();
-	rb = rcu_dereference(event->rb);
-	if (rb) {
-		ring_buffer_attach(event, rb);
+	rb = event->rb;
+	if (rb)
 		events = atomic_xchg(&rb->poll, 0);
-	}
-	rcu_read_unlock();
-
 	mutex_unlock(&event->mmap_mutex);
 
 	poll_wait(file, &event->waitq, wait);
@@ -3560,16 +3555,12 @@ static void ring_buffer_attach(struct pe
 		return;
 
 	spin_lock_irqsave(&rb->event_lock, flags);
-	if (!list_empty(&event->rb_entry))
-		goto unlock;
-
-	list_add(&event->rb_entry, &rb->event_list);
-unlock:
+	if (list_empty(&event->rb_entry))
+		list_add(&event->rb_entry, &rb->event_list);
 	spin_unlock_irqrestore(&rb->event_lock, flags);
 }
 
-static void ring_buffer_detach(struct perf_event *event,
-			       struct ring_buffer *rb)
+static void ring_buffer_detach(struct perf_event *event, struct ring_buffer *rb)
 {
 	unsigned long flags;
 
@@ -3588,13 +3579,10 @@ static void ring_buffer_wakeup(struct pe
 
 	rcu_read_lock();
 	rb = rcu_dereference(event->rb);
-	if (!rb)
-		goto unlock;
-
-	list_for_each_entry_rcu(event, &rb->event_list, rb_entry)
-		wake_up_all(&event->waitq);
-
-unlock:
+	if (rb) {
+		list_for_each_entry_rcu(event, &rb->event_list, rb_entry)
+			wake_up_all(&event->waitq);
+	}
 	rcu_read_unlock();
 }
 
@@ -3621,23 +3609,14 @@ static struct ring_buffer *ring_buffer_g
 	return rb;
 }
 
-static bool ring_buffer_put(struct ring_buffer *rb)
+static void ring_buffer_put(struct ring_buffer *rb)
 {
-	struct perf_event *event, *n;
-	unsigned long flags;
-
 	if (!atomic_dec_and_test(&rb->refcount))
-		return false;
+		return;
 
-	spin_lock_irqsave(&rb->event_lock, flags);
-	list_for_each_entry_safe(event, n, &rb->event_list, rb_entry) {
-		list_del_init(&event->rb_entry);
-		wake_up_all(&event->waitq);
-	}
-	spin_unlock_irqrestore(&rb->event_lock, flags);
+	WARN_ON_ONCE(!list_empty(&rb->event_list));
 
 	call_rcu(&rb->rcu_head, rb_free_rcu);
-	return true;
 }
 
 static void perf_mmap_open(struct vm_area_struct *vma)
@@ -3645,28 +3624,100 @@ static void perf_mmap_open(struct vm_are
 	struct perf_event *event = vma->vm_file->private_data;
 
 	atomic_inc(&event->mmap_count);
+	atomic_inc(&event->rb->mmap_count);
 }
 
+/*
+ * A buffer can be mmap()ed multiple times; either directly through the same
+ * event, or through other events by use of perf_event_set_output().
+ *
+ * In order to undo the VM accounting done by perf_mmap() we need to destroy
+ * the buffer here, where we still have a VM context. This means we need
+ * to detach all events redirecting to us.
+ */
 static void perf_mmap_close(struct vm_area_struct *vma)
 {
 	struct perf_event *event = vma->vm_file->private_data;
 
-	if (atomic_dec_and_mutex_lock(&event->mmap_count, &event->mmap_mutex)) {
-		struct ring_buffer *rb = event->rb;
-		struct user_struct *mmap_user = rb->mmap_user;
-		int mmap_locked = rb->mmap_locked;
-		unsigned long size = perf_data_size(rb);
+	struct ring_buffer *rb = event->rb;
+	struct user_struct *mmap_user = rb->mmap_user;
+	int mmap_locked = rb->mmap_locked;
+	unsigned long size = perf_data_size(rb);
 
-		rcu_assign_pointer(event->rb, NULL);
-		ring_buffer_detach(event, rb);
-		mutex_unlock(&event->mmap_mutex);
+	atomic_dec(&rb->mmap_count);
+
+	if (!atomic_dec_and_mutex_lock(&event->mmap_count, &event->mmap_mutex))
+		return;
 
-		if (ring_buffer_put(rb)) {
-			atomic_long_sub((size >> PAGE_SHIFT) + 1, &mmap_user->locked_vm);
-			vma->vm_mm->pinned_vm -= mmap_locked;
-			free_uid(mmap_user);
+	/* Detach current event from the buffer. */
+	rcu_assign_pointer(event->rb, NULL);
+	ring_buffer_detach(event, rb);
+	mutex_unlock(&event->mmap_mutex);
+
+	/* If there's still other mmap()s of this buffer, we're done. */
+	if (atomic_read(&rb->mmap_count)) {
+		ring_buffer_put(rb); /* can't be last */
+		return;
+	}
+
+	/*
+	 * No other mmap()s, detach from all other events that might redirect
+	 * into the now unreachable buffer. Somewhat complicated by the
+	 * fact that rb::event_lock otherwise nests inside mmap_mutex.
+	 */
+again:
+	rcu_read_lock();
+	list_for_each_entry_rcu(event, &rb->event_list, rb_entry) {
+		if (!atomic_long_inc_not_zero(&event->refcount)) {
+			/*
+			 * This event is en-route to free_event() which will
+			 * detach it and remove it from the list.
+			 */
+			continue;
 		}
+		rcu_read_unlock();
+
+		mutex_lock(&event->mmap_mutex);
+		/*
+		 * Check we didn't race with perf_event_set_output() which can
+		 * swizzle the rb from under us while we were waiting to
+		 * acquire mmap_mutex.
+		 *
+		 * If we find a different rb; ignore this event, a next
+		 * iteration will no longer find it on the list. We have to
+		 * still restart the iteration to make sure we're not now
+		 * iterating the wrong list.
+		 */
+		if (event->rb == rb) {
+			rcu_assign_pointer(event->rb, NULL);
+			ring_buffer_detach(event, rb);
+			ring_buffer_put(rb); /* can't be last, we still have one */
+		}
+		mutex_unlock(&event->mmap_mutex);
+		put_event(event);
+
+		/*
+		 * Restart the iteration; either we're on the wrong list or
+		 * destroyed its integrity by doing a deletion.
+		 */
+		goto again;
 	}
+	rcu_read_unlock();
+
+	/*
+	 * It could be there's still a few 0-ref events on the list; they'll
+	 * get cleaned up by free_event() -- they'll also still have their
+	 * ref on the rb and will free it whenever they are done with it.
+	 *
+	 * Aside from that, this buffer is 'fully' detached and unmapped,
+	 * undo the VM accounting.
+	 */
+
+	atomic_long_sub((size >> PAGE_SHIFT) + 1, &mmap_user->locked_vm);
+	vma->vm_mm->pinned_vm -= mmap_locked;
+	free_uid(mmap_user);
+
+	ring_buffer_put(rb); /* could be last */
 }
 
 static const struct vm_operations_struct perf_mmap_vmops = {
@@ -3716,10 +3767,24 @@ static int perf_mmap(struct file *file,
 		return -EINVAL;
 
 	WARN_ON_ONCE(event->ctx->parent_ctx);
+again:
 	mutex_lock(&event->mmap_mutex);
 	if (event->rb) {
-		if (event->rb->nr_pages != nr_pages)
+		if (event->rb->nr_pages != nr_pages) {
 			ret = -EINVAL;
+			goto unlock;
+		}
+
+		if (!atomic_inc_not_zero(&event->rb->mmap_count)) {
+			/*
+			 * Raced against perf_mmap_close() through
+			 * perf_event_set_output(). Try again, hope for better
+			 * luck.
+			 */
+			mutex_unlock(&event->mmap_mutex);
+			goto again;
+		}
+
 		goto unlock;
 	}
 
@@ -3761,12 +3826,14 @@ static int perf_mmap(struct file *file,
 		goto unlock;
 	}
 
+	atomic_set(&rb->mmap_count, 1);
 	rb->mmap_locked = extra;
 	rb->mmap_user = get_current_user();
 
 	atomic_long_add(user_extra, &user->locked_vm);
 	vma->vm_mm->pinned_vm += extra;
 
+	ring_buffer_attach(event, rb);
 	rcu_assign_pointer(event->rb, rb);
 
 unlock:
@@ -3774,6 +3841,10 @@ unlock:
 		atomic_inc(&event->mmap_count);
 	mutex_unlock(&event->mmap_mutex);
 
+	/*
+	 * Since pinned accounting is per vm we cannot allow fork() to copy our
+	 * vma.
+	 */
 	vma->vm_flags |= VM_DONTCOPY | VM_RESERVED;
 	vma->vm_ops = &perf_mmap_vmops;
 
@@ -6139,6 +6210,8 @@ set:
 	if (atomic_read(&event->mmap_count))
 		goto unlock;
 
+	old_rb = event->rb;
+
 	if (output_event) {
 		/* get the rb we want to redirect to */
 		rb = ring_buffer_get(output_event);
@@ -6146,16 +6219,28 @@ set:
 			goto unlock;
 	}
 
-	old_rb = event->rb;
-	rcu_assign_pointer(event->rb, rb);
 	if (old_rb)
 		ring_buffer_detach(event, old_rb);
+
+	if (rb)
+		ring_buffer_attach(event, rb);
+
+	rcu_assign_pointer(event->rb, rb);
+
+	if (old_rb) {
+		ring_buffer_put(old_rb);
+		/*
+		 * Since we detached before setting the new rb, so that we
+		 * could attach the new rb, we could have missed a wakeup.
+		 * Provide it now.
+		 */
+		wake_up_all(&event->waitq);
+	}
+
 	ret = 0;
 unlock:
 	mutex_unlock(&event->mmap_mutex);
 
-	if (old_rb)
-		ring_buffer_put(old_rb);
 out:
 	return ret;
 }
--- a/kernel/events/internal.h
+++ b/kernel/events/internal.h
@@ -26,7 +26,8 @@ struct ring_buffer {
 	spinlock_t			event_lock;
 	struct list_head		event_list;
 
-	int				mmap_locked;
+	atomic_t			mmap_count;
+	unsigned long			mmap_locked;
 	struct user_struct		*mmap_user;
 
 	struct perf_event_mmap_page	*user_page;

[78/85] perf: Fix perf mmap bugs

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Peter Zijlstra <peterz@infradead.org>

commit 26cb63ad11e04047a64309362674bcbbd6a6f246 upstream.

Vince reported a problem found by his perf specific trinity
fuzzer.

Al noticed 2 problems with perf's mmap():

 - it has issues against fork() since we use vma->vm_mm for accounting.
 - it has an rb refcount leak on double mmap().

We fix the issues against fork() by using VM_DONTCOPY; I don't
think there's code out there that uses this; we didn't hear
about weird accounting problems/crashes. If we do need this to
work, the previously proposed VM_PINNED could make this work.

Aside from the rb reference leak spotted by Al, Vince's example
prog was indeed doing a double mmap() through the use of
perf_event_set_output().

This exposes another problem, since we now have 2 events with
one buffer, the accounting gets screwy because we account per
event. Fix this by making the buffer responsible for its own
accounting.

[Backporting for 3.4-stable.
VM_RESERVED flag was replaced with pair 'VM_DONTEXPAND | VM_DONTDUMP' in
314e51b9 since 3.7.0-rc1, and 314e51b9 comes from a big patchset, we didn't
backport the patchset, so I restored 'VM_DNOTEXPAND | VM_DONTDUMP' as before:
-       vma->vm_flags |= VM_DONTCOPY | VM_DONTEXPAND | VM_DONTDUMP;
+       vma->vm_flags |= VM_DONTCOPY | VM_RESERVED;
 -- zliu]

Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Link: http://lkml.kernel.org/r/20130528085548.GA12193@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Zhouping Liu <zliu@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 include/linux/perf_event.h |  3 +--
 kernel/events/core.c       | 37 ++++++++++++++++++++-----------------
 kernel/events/internal.h   |  3 +++
 3 files changed, 24 insertions(+), 19 deletions(-)

--- a/include/linux/perf_event.h
+++ b/include/linux/perf_event.h
@@ -819,8 +819,7 @@ struct perf_event {
 	/* mmap bits */
 	struct mutex			mmap_mutex;
 	atomic_t			mmap_count;
-	int				mmap_locked;
-	struct user_struct		*mmap_user;
+
 	struct ring_buffer		*rb;
 	struct list_head		rb_entry;
 
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -2960,7 +2960,7 @@ static void free_event_rcu(struct rcu_he
 	kfree(event);
 }
 
-static void ring_buffer_put(struct ring_buffer *rb);
+static bool ring_buffer_put(struct ring_buffer *rb);
 
 static void free_event(struct perf_event *event)
 {
@@ -3621,13 +3621,13 @@ static struct ring_buffer *ring_buffer_g
 	return rb;
 }
 
-static void ring_buffer_put(struct ring_buffer *rb)
+static bool ring_buffer_put(struct ring_buffer *rb)
 {
 	struct perf_event *event, *n;
 	unsigned long flags;
 
 	if (!atomic_dec_and_test(&rb->refcount))
-		return;
+		return false;
 
 	spin_lock_irqsave(&rb->event_lock, flags);
 	list_for_each_entry_safe(event, n, &rb->event_list, rb_entry) {
@@ -3637,6 +3637,7 @@ static void ring_buffer_put(struct ring_
 	spin_unlock_irqrestore(&rb->event_lock, flags);
 
 	call_rcu(&rb->rcu_head, rb_free_rcu);
+	return true;
 }
 
 static void perf_mmap_open(struct vm_area_struct *vma)
@@ -3651,18 +3652,20 @@ static void perf_mmap_close(struct vm_ar
 	struct perf_event *event = vma->vm_file->private_data;
 
 	if (atomic_dec_and_mutex_lock(&event->mmap_count, &event->mmap_mutex)) {
-		unsigned long size = perf_data_size(event->rb);
-		struct user_struct *user = event->mmap_user;
 		struct ring_buffer *rb = event->rb;
+		struct user_struct *mmap_user = rb->mmap_user;
+		int mmap_locked = rb->mmap_locked;
+		unsigned long size = perf_data_size(rb);
 
-		atomic_long_sub((size >> PAGE_SHIFT) + 1, &user->locked_vm);
-		vma->vm_mm->pinned_vm -= event->mmap_locked;
 		rcu_assign_pointer(event->rb, NULL);
 		ring_buffer_detach(event, rb);
 		mutex_unlock(&event->mmap_mutex);
 
-		ring_buffer_put(rb);
-		free_uid(user);
+		if (ring_buffer_put(rb)) {
+			atomic_long_sub((size >> PAGE_SHIFT) + 1, &mmap_user->locked_vm);
+			vma->vm_mm->pinned_vm -= mmap_locked;
+			free_uid(mmap_user);
+		}
 	}
 }
 
@@ -3715,9 +3718,7 @@ static int perf_mmap(struct file *file,
 	WARN_ON_ONCE(event->ctx->parent_ctx);
 	mutex_lock(&event->mmap_mutex);
 	if (event->rb) {
-		if (event->rb->nr_pages == nr_pages)
-			atomic_inc(&event->rb->refcount);
-		else
+		if (event->rb->nr_pages != nr_pages)
 			ret = -EINVAL;
 		goto unlock;
 	}
@@ -3759,19 +3760,21 @@ static int perf_mmap(struct file *file,
 		ret = -ENOMEM;
 		goto unlock;
 	}
-	rcu_assign_pointer(event->rb, rb);
+
+	rb->mmap_locked = extra;
+	rb->mmap_user = get_current_user();
 
 	atomic_long_add(user_extra, &user->locked_vm);
-	event->mmap_locked = extra;
-	event->mmap_user = get_current_user();
-	vma->vm_mm->pinned_vm += event->mmap_locked;
+	vma->vm_mm->pinned_vm += extra;
+
+	rcu_assign_pointer(event->rb, rb);
 
 unlock:
 	if (!ret)
 		atomic_inc(&event->mmap_count);
 	mutex_unlock(&event->mmap_mutex);
 
-	vma->vm_flags |= VM_RESERVED;
+	vma->vm_flags |= VM_DONTCOPY | VM_RESERVED;
 	vma->vm_ops = &perf_mmap_vmops;
 
 	return ret;
--- a/kernel/events/internal.h
+++ b/kernel/events/internal.h
@@ -26,6 +26,9 @@ struct ring_buffer {
 	spinlock_t			event_lock;
 	struct list_head		event_list;
 
+	int				mmap_locked;
+	struct user_struct		*mmap_user;
+
 	struct perf_event_mmap_page	*user_page;
 	void				*data_pages[0];
 };

[31/85] ahci: AHCI-mode SATA patch for Intel Coleto Creek DeviceIDs

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Seth Heasley <seth.heasley@intel.com>

commit 1cfc7df3de10c40ed459e13cce6de616023bf41c upstream.

This patch adds the AHCI-mode SATA DeviceIDs for the Intel Coleto Creek PCH.

Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/ata/ahci.c | 1 +
 1 file changed, 1 insertion(+)

--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -302,6 +302,7 @@ static const struct pci_device_id ahci_p
 	{ PCI_VDEVICE(INTEL, 0x8d64), board_ahci }, /* Wellsburg RAID */
 	{ PCI_VDEVICE(INTEL, 0x8d66), board_ahci }, /* Wellsburg RAID */
 	{ PCI_VDEVICE(INTEL, 0x8d6e), board_ahci }, /* Wellsburg RAID */
+	{ PCI_VDEVICE(INTEL, 0x23a3), board_ahci }, /* Coleto Creek AHCI */
 
 	/* JMicron 360/1/3/5/6, match class to avoid IDE function */
 	{ PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,

[46/85] Handle big endianness in NTLM (ntlmv2) authentication

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Steve French <smfrench@us.ibm.com>

commit fdf96a907c1fbb93c633e2b7ede3b8df26d6a4c0 upstream.

This is RH bug 970891
Uppercasing of username during calculation of ntlmv2 hash fails
because UniStrupr function does not handle big endian wchars.

Also fix a comment in the same code to reflect its correct usage.

[To make it easier for stable (rather than require 2nd patch) fixed
this patch of Shirish's to remove endian warning generated
by sparse -- steve f.]

Reported-by: steve <sanpatr1@in.ibm.com>
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
[bwh: Backported to 3.2: adjust context, indentation]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 fs/cifs/cifs_unicode.h | 8 ++++----
 fs/cifs/cifsencrypt.c  | 6 +++---
 2 files changed, 7 insertions(+), 7 deletions(-)

--- a/fs/cifs/cifs_unicode.h
+++ b/fs/cifs/cifs_unicode.h
@@ -323,14 +323,14 @@ UniToupper(register wchar_t uc)
 /*
  * UniStrupr:  Upper case a unicode string
  */
-static inline wchar_t *
-UniStrupr(register wchar_t *upin)
+static inline __le16 *
+UniStrupr(register __le16 *upin)
 {
-	register wchar_t *up;
+	register __le16 *up;
 
 	up = upin;
 	while (*up) {		/* For all characters */
-		*up = UniToupper(*up);
+		*up = cpu_to_le16(UniToupper(le16_to_cpu(*up)));
 		up++;
 	}
 	return upin;		/* Return input pointer */
--- a/fs/cifs/cifsencrypt.c
+++ b/fs/cifs/cifsencrypt.c
@@ -394,7 +394,7 @@ static int calc_ntlmv2_hash(struct cifs_
 	int rc = 0;
 	int len;
 	char nt_hash[CIFS_NTHASH_SIZE];
-	wchar_t *user;
+	__le16 *user;
 	wchar_t *domain;
 	wchar_t *server;
 
@@ -419,7 +419,7 @@ static int calc_ntlmv2_hash(struct cifs_
 		return rc;
 	}
 
-	/* convert ses->user_name to unicode and uppercase */
+	/* convert ses->user_name to unicode */
 	len = strlen(ses->user_name);
 	user = kmalloc(2 + (len * 2), GFP_KERNEL);
 	if (user == NULL) {
@@ -427,7 +427,7 @@ static int calc_ntlmv2_hash(struct cifs_
 		rc = -ENOMEM;
 		return rc;
 	}
-	len = cifs_strtoUCS((__le16 *)user, ses->user_name, len, nls_cp);
+	len = cifs_strtoUCS(user, ses->user_name, len, nls_cp);
 	UniStrupr(user);
 
 	rc = crypto_shash_update(&ses->server->secmech.sdeschmacmd5->shash,

[36/85] [SCSI] mpt2sas: Fix for device scan following host reset could get stuck in a infinite loop

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Sreekanth Reddy <Sreekanth.Reddy@lsi.com>

commit 6241f22ca12a26ee149cbe31b27bac97dbdc8bc4 upstream.

Modified device scan routine so each configuration page read breaks from the
while loop when the ioc_status is not equal to MPI2_IOCSTATUS_SUCCESS.

[jejb: checkpatch fixes]
Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
[bwh: Backported to 3.2; adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/scsi/mpt2sas/mpt2sas_scsih.c | 122 +++++++++++++++++++++++++++++++++--
 1 file changed, 117 insertions(+), 5 deletions(-)

--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -7010,11 +7010,14 @@ _scsih_scan_for_devices_after_reset(stru
 	struct _sas_device *sas_device;
 	struct _sas_node *expander_device;
 	static struct _raid_device *raid_device;
+	u8 retry_count;
 
 	printk(MPT2SAS_INFO_FMT "scan devices: start\n", ioc->name);
 
 	_scsih_sas_host_refresh(ioc);
 
+	printk(MPT2SAS_INFO_FMT "\tscan devices: expanders start\n",
+		ioc->name);
 	/* expanders */
 	handle = 0xFFFF;
 	while (!(mpt2sas_config_get_expander_pg0(ioc, &mpi_reply, &expander_pg0,
@@ -7023,19 +7026,39 @@ _scsih_scan_for_devices_after_reset(stru
 		    MPI2_IOCSTATUS_MASK;
 		if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
 			break;
+		if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+			printk(MPT2SAS_INFO_FMT "\tbreak from expander scan: "
+				"ioc_status(0x%04x), loginfo(0x%08x)\n",
+				ioc->name, ioc_status,
+				le32_to_cpu(mpi_reply.IOCLogInfo));
+			break;
+		}
 		handle = le16_to_cpu(expander_pg0.DevHandle);
 		expander_device = mpt2sas_scsih_expander_find_by_sas_address(
 		    ioc, le64_to_cpu(expander_pg0.SASAddress));
 		if (expander_device)
 			_scsih_refresh_expander_links(ioc, expander_device,
 			    handle);
-		else
+		else {
+			printk(MPT2SAS_INFO_FMT "\tBEFORE adding expander: "
+				"handle (0x%04x), sas_addr(0x%016llx)\n",
+				ioc->name, handle, (unsigned long long)
+				le64_to_cpu(expander_pg0.SASAddress));
 			_scsih_expander_add(ioc, handle);
+			printk(MPT2SAS_INFO_FMT "\tAFTER adding expander: "
+				"handle (0x%04x), sas_addr(0x%016llx)\n",
+				ioc->name, handle, (unsigned long long)
+				le64_to_cpu(expander_pg0.SASAddress));
+		}
 	}
 
+	printk(MPT2SAS_INFO_FMT "\tscan devices: expanders complete\n",
+		ioc->name);
+
 	if (!ioc->ir_firmware)
 		goto skip_to_sas;
 
+	printk(MPT2SAS_INFO_FMT "\tscan devices phys disk start\n", ioc->name);
 	/* phys disk */
 	phys_disk_num = 0xFF;
 	while (!(mpt2sas_config_get_phys_disk_pg0(ioc, &mpi_reply,
@@ -7045,6 +7068,13 @@ _scsih_scan_for_devices_after_reset(stru
 		    MPI2_IOCSTATUS_MASK;
 		if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
 			break;
+		if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+			printk(MPT2SAS_INFO_FMT "\tbreak from phys disk scan:"
+				"ioc_status(0x%04x), loginfo(0x%08x)\n",
+				ioc->name, ioc_status,
+				le32_to_cpu(mpi_reply.IOCLogInfo));
+			break;
+		}
 		phys_disk_num = pd_pg0.PhysDiskNum;
 		handle = le16_to_cpu(pd_pg0.DevHandle);
 		sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
@@ -7054,17 +7084,46 @@ _scsih_scan_for_devices_after_reset(stru
 		    &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE,
 		    handle) != 0)
 			continue;
+		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+			MPI2_IOCSTATUS_MASK;
+		if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+			printk(MPT2SAS_INFO_FMT "\tbreak from phys disk scan "
+				"ioc_status(0x%04x), loginfo(0x%08x)\n",
+				ioc->name, ioc_status,
+				le32_to_cpu(mpi_reply.IOCLogInfo));
+			break;
+		}
 		parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle);
 		if (!_scsih_get_sas_address(ioc, parent_handle,
 		    &sas_address)) {
+			printk(MPT2SAS_INFO_FMT "\tBEFORE adding phys disk: "
+				" handle (0x%04x), sas_addr(0x%016llx)\n",
+				ioc->name, handle, (unsigned long long)
+				le64_to_cpu(sas_device_pg0.SASAddress));
 			mpt2sas_transport_update_links(ioc, sas_address,
 			    handle, sas_device_pg0.PhyNum,
 			    MPI2_SAS_NEG_LINK_RATE_1_5);
 			set_bit(handle, ioc->pd_handles);
-			_scsih_add_device(ioc, handle, 0, 1);
+			retry_count = 0;
+			/* This will retry adding the end device.
+			* _scsih_add_device() will decide on retries and
+			* return "1" when it should be retried
+			*/
+			while (_scsih_add_device(ioc, handle, retry_count++,
+				1)) {
+					ssleep(1);
+			}
+			printk(MPT2SAS_INFO_FMT "\tAFTER adding phys disk: "
+				" handle (0x%04x), sas_addr(0x%016llx)\n",
+				ioc->name, handle, (unsigned long long)
+				le64_to_cpu(sas_device_pg0.SASAddress));
 		}
 	}
 
+	printk(MPT2SAS_INFO_FMT "\tscan devices: phys disk complete\n",
+		ioc->name);
+
+	printk(MPT2SAS_INFO_FMT "\tscan devices: volumes start\n", ioc->name);
 	/* volumes */
 	handle = 0xFFFF;
 	while (!(mpt2sas_config_get_raid_volume_pg1(ioc, &mpi_reply,
@@ -7073,6 +7132,13 @@ _scsih_scan_for_devices_after_reset(stru
 		    MPI2_IOCSTATUS_MASK;
 		if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
 			break;
+		if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+			printk(MPT2SAS_INFO_FMT "\tbreak from volume scan: "
+				"ioc_status(0x%04x), loginfo(0x%08x)\n",
+				ioc->name, ioc_status,
+				le32_to_cpu(mpi_reply.IOCLogInfo));
+			break;
+		}
 		handle = le16_to_cpu(volume_pg1.DevHandle);
 		raid_device = _scsih_raid_device_find_by_wwid(ioc,
 		    le64_to_cpu(volume_pg1.WWID));
@@ -7082,18 +7148,38 @@ _scsih_scan_for_devices_after_reset(stru
 		    &volume_pg0, MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, handle,
 		     sizeof(Mpi2RaidVolPage0_t)))
 			continue;
+		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+			MPI2_IOCSTATUS_MASK;
+		if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+			printk(MPT2SAS_INFO_FMT "\tbreak from volume scan: "
+				"ioc_status(0x%04x), loginfo(0x%08x)\n",
+				ioc->name, ioc_status,
+				le32_to_cpu(mpi_reply.IOCLogInfo));
+			break;
+		}
 		if (volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_OPTIMAL ||
 		    volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_ONLINE ||
 		    volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_DEGRADED) {
 			memset(&element, 0, sizeof(Mpi2EventIrConfigElement_t));
 			element.ReasonCode = MPI2_EVENT_IR_CHANGE_RC_ADDED;
 			element.VolDevHandle = volume_pg1.DevHandle;
+			printk(MPT2SAS_INFO_FMT "\tBEFORE adding volume: "
+				" handle (0x%04x)\n", ioc->name,
+				volume_pg1.DevHandle);
 			_scsih_sas_volume_add(ioc, &element);
+			printk(MPT2SAS_INFO_FMT "\tAFTER adding volume: "
+				" handle (0x%04x)\n", ioc->name,
+				volume_pg1.DevHandle);
 		}
 	}
 
+	printk(MPT2SAS_INFO_FMT "\tscan devices: volumes complete\n",
+		ioc->name);
+
  skip_to_sas:
 
+	printk(MPT2SAS_INFO_FMT "\tscan devices: end devices start\n",
+		ioc->name);
 	/* sas devices */
 	handle = 0xFFFF;
 	while (!(mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply,
@@ -7103,6 +7189,13 @@ _scsih_scan_for_devices_after_reset(stru
 		    MPI2_IOCSTATUS_MASK;
 		if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
 			break;
+		if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+			printk(MPT2SAS_INFO_FMT "\tbreak from end device scan:"
+				" ioc_status(0x%04x), loginfo(0x%08x)\n",
+				ioc->name, ioc_status,
+				le32_to_cpu(mpi_reply.IOCLogInfo));
+				break;
+		}
 		handle = le16_to_cpu(sas_device_pg0.DevHandle);
 		if (!(_scsih_is_end_device(
 		    le32_to_cpu(sas_device_pg0.DeviceInfo))))
@@ -7113,12 +7206,31 @@ _scsih_scan_for_devices_after_reset(stru
 			continue;
 		parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle);
 		if (!_scsih_get_sas_address(ioc, parent_handle, &sas_address)) {
+			printk(MPT2SAS_INFO_FMT "\tBEFORE adding end device: "
+				"handle (0x%04x), sas_addr(0x%016llx)\n",
+				ioc->name, handle, (unsigned long long)
+				le64_to_cpu(sas_device_pg0.SASAddress));
 			mpt2sas_transport_update_links(ioc, sas_address, handle,
 			    sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5);
-			_scsih_add_device(ioc, handle, 0, 0);
+			retry_count = 0;
+			/* This will retry adding the end device.
+			 * _scsih_add_device() will decide on retries and
+			 * return "1" when it should be retried
+			 */
+			while (_scsih_add_device(ioc, handle, retry_count++,
+				0)) {
+					ssleep(1);
+			}
+			printk(MPT2SAS_INFO_FMT "\tAFTER adding end device: "
+				"handle (0x%04x), sas_addr(0x%016llx)\n",
+				ioc->name, handle, (unsigned long long)
+				le64_to_cpu(sas_device_pg0.SASAddress));
 		}
 	}
 
+	printk(MPT2SAS_INFO_FMT "\tscan devices: end devices complete\n",
+		ioc->name);
+
 	printk(MPT2SAS_INFO_FMT "scan devices: complete\n", ioc->name);
 }
 

[53/85] UBIFS: prepare to fix a horrid bug

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>

commit 33f1a63ae84dfd9ad298cf275b8f1887043ced36 upstream.

Al Viro pointed me to the fact that '->readdir()' and '->llseek()' have no
mutual exclusion, which means the 'ubifs_dir_llseek()' can be run while we are
in the middle of 'ubifs_readdir()'.

First of all, this means that 'file->private_data' can be freed while
'ubifs_readdir()' uses it.  But this particular patch does not fix the problem.
This patch is only a preparation, and the fix will follow next.

In this patch we make 'ubifs_readdir()' stop using 'file->f_pos' directly,
because 'file->f_pos' can be changed by '->llseek()' at any point. This may
lead 'ubifs_readdir()' to returning inconsistent data: directory entry names
may correspond to incorrect file positions.

So here we introduce a local variable 'pos', read 'file->f_pose' once at very
the beginning, and then stick to 'pos'. The result of this is that when
'ubifs_dir_llseek()' changes 'file->f_pos' while we are in the middle of
'ubifs_readdir()', the latter "wins".

Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 fs/ubifs/dir.c | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

--- a/fs/ubifs/dir.c
+++ b/fs/ubifs/dir.c
@@ -357,15 +357,16 @@ static unsigned int vfs_dent_type(uint8_
 static int ubifs_readdir(struct file *file, void *dirent, filldir_t filldir)
 {
 	int err, over = 0;
+	loff_t pos = file->f_pos;
 	struct qstr nm;
 	union ubifs_key key;
 	struct ubifs_dent_node *dent;
 	struct inode *dir = file->f_path.dentry->d_inode;
 	struct ubifs_info *c = dir->i_sb->s_fs_info;
 
-	dbg_gen("dir ino %lu, f_pos %#llx", dir->i_ino, file->f_pos);
+	dbg_gen("dir ino %lu, f_pos %#llx", dir->i_ino, pos);
 
-	if (file->f_pos > UBIFS_S_KEY_HASH_MASK || file->f_pos == 2)
+	if (pos > UBIFS_S_KEY_HASH_MASK || pos == 2)
 		/*
 		 * The directory was seek'ed to a senseless position or there
 		 * are no more entries.
@@ -373,15 +374,15 @@ static int ubifs_readdir(struct file *fi
 		return 0;
 
 	/* File positions 0 and 1 correspond to "." and ".." */
-	if (file->f_pos == 0) {
+	if (pos == 0) {
 		ubifs_assert(!file->private_data);
 		over = filldir(dirent, ".", 1, 0, dir->i_ino, DT_DIR);
 		if (over)
 			return 0;
-		file->f_pos = 1;
+		file->f_pos = pos = 1;
 	}
 
-	if (file->f_pos == 1) {
+	if (pos == 1) {
 		ubifs_assert(!file->private_data);
 		over = filldir(dirent, "..", 2, 1,
 			       parent_ino(file->f_path.dentry), DT_DIR);
@@ -397,7 +398,7 @@ static int ubifs_readdir(struct file *fi
 			goto out;
 		}
 
-		file->f_pos = key_hash_flash(c, &dent->key);
+		file->f_pos = pos = key_hash_flash(c, &dent->key);
 		file->private_data = dent;
 	}
 
@@ -405,17 +406,16 @@ static int ubifs_readdir(struct file *fi
 	if (!dent) {
 		/*
 		 * The directory was seek'ed to and is now readdir'ed.
-		 * Find the entry corresponding to @file->f_pos or the
-		 * closest one.
+		 * Find the entry corresponding to @pos or the closest one.
 		 */
-		dent_key_init_hash(c, &key, dir->i_ino, file->f_pos);
+		dent_key_init_hash(c, &key, dir->i_ino, pos);
 		nm.name = NULL;
 		dent = ubifs_tnc_next_ent(c, &key, &nm);
 		if (IS_ERR(dent)) {
 			err = PTR_ERR(dent);
 			goto out;
 		}
-		file->f_pos = key_hash_flash(c, &dent->key);
+		file->f_pos = pos = key_hash_flash(c, &dent->key);
 		file->private_data = dent;
 	}
 
@@ -427,7 +427,7 @@ static int ubifs_readdir(struct file *fi
 			     ubifs_inode(dir)->creat_sqnum);
 
 		nm.len = le16_to_cpu(dent->nlen);
-		over = filldir(dirent, dent->name, nm.len, file->f_pos,
+		over = filldir(dirent, dent->name, nm.len, pos,
 			       le64_to_cpu(dent->inum),
 			       vfs_dent_type(dent->type));
 		if (over)
@@ -443,7 +443,7 @@ static int ubifs_readdir(struct file *fi
 		}
 
 		kfree(file->private_data);
-		file->f_pos = key_hash_flash(c, &dent->key);
+		file->f_pos = pos = key_hash_flash(c, &dent->key);
 		file->private_data = dent;
 		cond_resched();
 	}

[77/85] ceph: fix statvfs fr_size

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Sage Weil <sage@inktank.com>

commit 92a49fb0f79f3300e6e50ddf56238e70678e4202 upstream.

Different versions of glibc are broken in different ways, but the short of
it is that for the time being, frsize should == bsize, and be used as the
multiple for the blocks, free, and available fields.  This mirrors what is
done for NFS.  The previous reporting of the page size for frsize meant
that newer glibc and df would report a very small value for the fs size.

Fixes http://tracker.ceph.com/issues/3793.

Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Greg Farnum <greg@inktank.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 fs/ceph/super.c | 7 ++++++-
 fs/ceph/super.h | 2 +-
 2 files changed, 7 insertions(+), 2 deletions(-)

--- a/fs/ceph/super.c
+++ b/fs/ceph/super.c
@@ -70,8 +70,14 @@ static int ceph_statfs(struct dentry *de
 	/*
 	 * express utilization in terms of large blocks to avoid
 	 * overflow on 32-bit machines.
+	 *
+	 * NOTE: for the time being, we make bsize == frsize to humor
+	 * not-yet-ancient versions of glibc that are broken.
+	 * Someday, we will probably want to report a real block
+	 * size...  whatever that may mean for a network file system!
 	 */
 	buf->f_bsize = 1 << CEPH_BLOCK_SHIFT;
+	buf->f_frsize = 1 << CEPH_BLOCK_SHIFT;
 	buf->f_blocks = le64_to_cpu(st.kb) >> (CEPH_BLOCK_SHIFT-10);
 	buf->f_bfree = le64_to_cpu(st.kb_avail) >> (CEPH_BLOCK_SHIFT-10);
 	buf->f_bavail = le64_to_cpu(st.kb_avail) >> (CEPH_BLOCK_SHIFT-10);
@@ -79,7 +85,6 @@ static int ceph_statfs(struct dentry *de
 	buf->f_files = le64_to_cpu(st.num_objects);
 	buf->f_ffree = -1;
 	buf->f_namelen = NAME_MAX;
-	buf->f_frsize = PAGE_CACHE_SIZE;
 
 	/* leave fsid little-endian, regardless of host endianness */
 	fsid = *(u64 *)(&monmap->fsid) ^ *((u64 *)&monmap->fsid + 1);
--- a/fs/ceph/super.h
+++ b/fs/ceph/super.h
@@ -21,7 +21,7 @@
 
 /* large granularity for statfs utilization stats to facilitate
  * large volume sizes on 32-bit machines. */
-#define CEPH_BLOCK_SHIFT   20  /* 1 MB */
+#define CEPH_BLOCK_SHIFT   22  /* 4 MB */
 #define CEPH_BLOCK         (1 << CEPH_BLOCK_SHIFT)
 
 #define CEPH_MOUNT_OPT_DIRSTAT         (1<<4) /* `cat dirname` for stats */

[37/85] [SCSI] mpt2sas: fix firmware failure with wrong task attribute

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Sreekanth Reddy <Sreekanth.Reddy@lsi.com>

commit 48ba2efc382f94fae16ca8ca011e5961a81ad1ea upstream.

When SCSI command is received with task attribute not set, set it to SIMPLE.
Previously it is set to untagged. This causes the firmware to fail the commands.

Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/scsi/mpt2sas/mpt2sas_scsih.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -3934,11 +3934,7 @@ _scsih_qcmd_lck(struct scsi_cmnd *scmd,
 			else
 				mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ;
 		} else
-/* MPI Revision I (UNIT = 0xA) - removed MPI2_SCSIIO_CONTROL_UNTAGGED */
-/*			mpi_control |= MPI2_SCSIIO_CONTROL_UNTAGGED;
- */
-			mpi_control |= (0x500);
-
+			mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ;
 	} else
 		mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ;
 	/* Make sure Device is not raid volume.

[22/85] ASoC: wm8962: Remove remaining direct register cache accesses

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Nicolin Chen <b42378@freescale.com>

commit 2e7ee15ced914e109a1a5b6dfcd463d846a13bd5 upstream.

Also fix return values for headphone switch updates.

Signed-off-by: Nicolin Chen <b42378@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 sound/soc/codecs/wm8962.c | 24 +++++++++++++-----------
 1 file changed, 13 insertions(+), 11 deletions(-)

--- a/sound/soc/codecs/wm8962.c
+++ b/sound/soc/codecs/wm8962.c
@@ -2117,7 +2117,6 @@ static int wm8962_put_hp_sw(struct snd_k
 			    struct snd_ctl_elem_value *ucontrol)
 {
 	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
-	u16 *reg_cache = codec->reg_cache;
 	int ret;
 
 	/* Apply the update (if any) */
@@ -2126,16 +2125,19 @@ static int wm8962_put_hp_sw(struct snd_k
 		return 0;
 
 	/* If the left PGA is enabled hit that VU bit... */
-	if (snd_soc_read(codec, WM8962_PWR_MGMT_2) & WM8962_HPOUTL_PGA_ENA)
-		return snd_soc_write(codec, WM8962_HPOUTL_VOLUME,
-				     reg_cache[WM8962_HPOUTL_VOLUME]);
+	ret = snd_soc_read(codec, WM8962_PWR_MGMT_2);
+	if (ret & WM8962_HPOUTL_PGA_ENA) {
+		snd_soc_write(codec, WM8962_HPOUTL_VOLUME,
+			      snd_soc_read(codec, WM8962_HPOUTL_VOLUME));
+		return 1;
+	}
 
 	/* ...otherwise the right.  The VU is stereo. */
-	if (snd_soc_read(codec, WM8962_PWR_MGMT_2) & WM8962_HPOUTR_PGA_ENA)
-		return snd_soc_write(codec, WM8962_HPOUTR_VOLUME,
-				     reg_cache[WM8962_HPOUTR_VOLUME]);
+	if (ret & WM8962_HPOUTR_PGA_ENA)
+		snd_soc_write(codec, WM8962_HPOUTR_VOLUME,
+			      snd_soc_read(codec, WM8962_HPOUTR_VOLUME));
 
-	return 0;
+	return 1;
 }
 
 /* The VU bits for the speakers are in a different register to the mute
@@ -3944,7 +3946,6 @@ static int wm8962_probe(struct snd_soc_c
 	int ret;
 	struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
 	struct wm8962_pdata *pdata = dev_get_platdata(codec->dev);
-	u16 *reg_cache = codec->reg_cache;
 	int i, trigger, irq_pol;
 	bool dmicclk, dmicdat;
 
@@ -4055,8 +4056,9 @@ static int wm8962_probe(struct snd_soc_c
 
 		/* Put the speakers into mono mode? */
 		if (pdata->spk_mono)
-			reg_cache[WM8962_CLASS_D_CONTROL_2]
-				|= WM8962_SPK_MONO;
+			snd_soc_update_bits(codec, WM8962_CLASS_D_CONTROL_2,
+				WM8962_SPK_MONO_MASK, WM8962_SPK_MONO);
+
 
 		/* Micbias setup, detection enable and detection
 		 * threasholds. */

[62/85] HID: apple: Add support for the 2013 Macbook Air

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Dmitry Torokhov <rydberg@euromail.se>

commit 9d9a04ee758b4c1fcc7586d065cdde7a7607e156 upstream.

This patch adds keyboard support for MacbookAir6,2 as WELLSPRING8
(0x0291, 0x0292, 0x0293). The touchpad is handled in a separate
bcm5974 patch, as usual.

Reported-and-tested-by: Brad Ford <plymouthffl@gmail.com>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/hid/hid-apple.c | 6 ++++++
 drivers/hid/hid-core.c  | 6 ++++++
 drivers/hid/hid-ids.h   | 3 +++
 3 files changed, 15 insertions(+)

--- a/drivers/hid/hid-apple.c
+++ b/drivers/hid/hid-apple.c
@@ -529,6 +529,12 @@ static const struct hid_device_id apple_
 		.driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS),
 		.driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING8_ANSI),
+		.driver_data = APPLE_HAS_FN },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING8_ISO),
+		.driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING8_JIS),
+		.driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI),
 		.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO),
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1386,6 +1386,9 @@ static const struct hid_device_id hid_ha
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING8_ANSI) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING8_ISO) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING8_JIS) },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI) },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO) },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS) },
@@ -1995,6 +1998,9 @@ static const struct hid_device_id hid_mo
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING8_ANSI) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING8_ISO) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING8_JIS) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) },
 	{ }
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -136,6 +136,9 @@
 #define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS   0x023b
 #define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2011_ANSI  0x0255
 #define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2011_ISO   0x0256
+#define USB_DEVICE_ID_APPLE_WELLSPRING8_ANSI	0x0291
+#define USB_DEVICE_ID_APPLE_WELLSPRING8_ISO	0x0292
+#define USB_DEVICE_ID_APPLE_WELLSPRING8_JIS	0x0293
 #define USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY	0x030a
 #define USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY	0x030b
 #define USB_DEVICE_ID_APPLE_ATV_IRCONTROL	0x8241

[75/85] perf: Remove WARN_ON_ONCE() check in __perf_event_enable() for valid scenario

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Jiri Olsa <jolsa@redhat.com>

commit 06f417968beac6e6b614e17b37d347aa6a6b1d30 upstream.

The '!ctx->is_active' check has a valid scenario, so
there's no need for the warning.

The reason is that there's a time window between the
'ctx->is_active' check in the perf_event_enable() function
and the __perf_event_enable() function having:

  - IRQs on
  - ctx->lock unlocked

where the task could be killed and 'ctx' deactivated by
perf_event_exit_task(), ending up with the warning below.

So remove the WARN_ON_ONCE() check and add comments to
explain it all.

This addresses the following warning reported by Vince Weaver:

[  324.983534] ------------[ cut here ]------------
[  324.984420] WARNING: at kernel/events/core.c:1953 __perf_event_enable+0x187/0x190()
[  324.984420] Modules linked in:
[  324.984420] CPU: 19 PID: 2715 Comm: nmi_bug_snb Not tainted 3.10.0+ #246
[  324.984420] Hardware name: Supermicro X8DTN/X8DTN, BIOS 4.6.3 01/08/2010
[  324.984420]  0000000000000009 ffff88043fce3ec8 ffffffff8160ea0b ffff88043fce3f00
[  324.984420]  ffffffff81080ff0 ffff8802314fdc00 ffff880231a8f800 ffff88043fcf7860
[  324.984420]  0000000000000286 ffff880231a8f800 ffff88043fce3f10 ffffffff8108103a
[  324.984420] Call Trace:
[  324.984420]  <IRQ>  [<ffffffff8160ea0b>] dump_stack+0x19/0x1b
[  324.984420]  [<ffffffff81080ff0>] warn_slowpath_common+0x70/0xa0
[  324.984420]  [<ffffffff8108103a>] warn_slowpath_null+0x1a/0x20
[  324.984420]  [<ffffffff81134437>] __perf_event_enable+0x187/0x190
[  324.984420]  [<ffffffff81130030>] remote_function+0x40/0x50
[  324.984420]  [<ffffffff810e51de>] generic_smp_call_function_single_interrupt+0xbe/0x130
[  324.984420]  [<ffffffff81066a47>] smp_call_function_single_interrupt+0x27/0x40
[  324.984420]  [<ffffffff8161fd2f>] call_function_single_interrupt+0x6f/0x80
[  324.984420]  <EOI>  [<ffffffff816161a1>] ? _raw_spin_unlock_irqrestore+0x41/0x70
[  324.984420]  [<ffffffff8113799d>] perf_event_exit_task+0x14d/0x210
[  324.984420]  [<ffffffff810acd04>] ? switch_task_namespaces+0x24/0x60
[  324.984420]  [<ffffffff81086946>] do_exit+0x2b6/0xa40
[  324.984420]  [<ffffffff8161615c>] ? _raw_spin_unlock_irq+0x2c/0x30
[  324.984420]  [<ffffffff81087279>] do_group_exit+0x49/0xc0
[  324.984420]  [<ffffffff81096854>] get_signal_to_deliver+0x254/0x620
[  324.984420]  [<ffffffff81043057>] do_signal+0x57/0x5a0
[  324.984420]  [<ffffffff8161a164>] ? __do_page_fault+0x2a4/0x4e0
[  324.984420]  [<ffffffff8161665c>] ? retint_restore_args+0xe/0xe
[  324.984420]  [<ffffffff816166cd>] ? retint_signal+0x11/0x84
[  324.984420]  [<ffffffff81043605>] do_notify_resume+0x65/0x80
[  324.984420]  [<ffffffff81616702>] retint_signal+0x46/0x84
[  324.984420] ---[ end trace 442ec2f04db3771a ]---

Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1373384651-6109-2-git-send-email-jolsa@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 kernel/events/core.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -1687,7 +1687,16 @@ static int __perf_event_enable(void *inf
 	struct perf_cpu_context *cpuctx = __get_cpu_context(ctx);
 	int err;
 
-	if (WARN_ON_ONCE(!ctx->is_active))
+	/*
+	 * There's a time window between 'ctx->is_active' check
+	 * in perf_event_enable function and this place having:
+	 *   - IRQs on
+	 *   - ctx->lock unlocked
+	 *
+	 * where the task could be killed and 'ctx' deactivated
+	 * by perf_event_exit_task.
+	 */
+	if (!ctx->is_active)
 		return -EINVAL;
 
 	raw_spin_lock(&ctx->lock);

[19/85] ath9k: Fix noisefloor calibration

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Sujith Manoharan <c_manoha@qca.qualcomm.com>

commit 696df78509d1f81b651dd98ecdc1aecab616db6b upstream.

The commits,

"ath9k: Fix regression in channelwidth switch at the same channel"
"ath9k: Fix invalid noisefloor reading due to channel update"

attempted to fix noisefloor calibration when a channel switch
happens due to HT20/HT40 bandwidth change. This is causing invalid
readings resulting in messages like:

"ath: phy16: NF[0] (-45) > MAX (-95), correcting to MAX".

This results in an incorrect noise being used initially for reporting
the signal level of received packets, until NF calibration is done
and the history buffer is updated via the ANI timer, which happens
much later.

When a bandwidth change happens, it is appropriate to reset
the internal history data for the channel. Do this correctly in the
reset() routine by checking the "chanmode" variable.

Cc: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
[bwh: Backported to 3.2: adjust context, indentation]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/net/wireless/ath/ath9k/hw.c   | 3 ++-
 drivers/net/wireless/ath/ath9k/main.c | 7 -------
 2 files changed, 2 insertions(+), 8 deletions(-)

--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -1540,7 +1540,8 @@ int ath9k_hw_reset(struct ath_hw *ah, st
 	if (caldata &&
 	    (chan->channel != caldata->channel ||
 	     (chan->channelFlags & ~CHANNEL_CW_INT) !=
-	     (caldata->channelFlags & ~CHANNEL_CW_INT))) {
+	     (caldata->channelFlags & ~CHANNEL_CW_INT) ||
+	     chan->chanmode != caldata->chanmode)) {
 		/* Operating channel changed, reset channel calibration data */
 		memset(caldata, 0, sizeof(*caldata));
 		ath9k_init_nfcal_hist_buffer(ah, chan);
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1688,13 +1688,6 @@ static int ath9k_config(struct ieee80211
 		ath_update_survey_stats(sc);
 		spin_unlock_irqrestore(&common->cc_lock, flags);
 
-		/*
-		 * Preserve the current channel values, before updating
-		 * the same channel
-		 */
-		if (ah->curchan && (old_pos == pos))
-			ath9k_hw_getnf(ah, ah->curchan);
-
 		ath9k_cmn_update_ichannel(&sc->sc_ah->channels[pos],
 					  curchan, conf->channel_type);
 

[35/85] [SCSI] mpt2sas: Fix for issue Missing delay not getting set during system bootup

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: "Reddy, Sreekanth" <Sreekanth.Reddy@lsi.com>

commit b0df96a0068daee4f9c2189c29b9053eb6e46b17 upstream.

Missing delay is not getting set properly. The reason is that it is not
defined in the same file from where it is being invoked.  The fix is to move
the missing delay module parameter from mpt2sas_base.c to mpt2sas_scsh.c.

Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/scsi/mpt2sas/mpt2sas_base.c  | 13 +++----------
 drivers/scsi/mpt2sas/mpt2sas_base.h  |  3 +++
 drivers/scsi/mpt2sas/mpt2sas_scsih.c |  8 +++++++-
 3 files changed, 13 insertions(+), 11 deletions(-)

--- a/drivers/scsi/mpt2sas/mpt2sas_base.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.c
@@ -79,10 +79,6 @@ static int msix_disable = -1;
 module_param(msix_disable, int, 0);
 MODULE_PARM_DESC(msix_disable, " disable msix routed interrupts (default=0)");
 
-static int missing_delay[2] = {-1, -1};
-module_param_array(missing_delay, int, NULL, 0);
-MODULE_PARM_DESC(missing_delay, " device missing delay , io missing delay");
-
 static int mpt2sas_fwfault_debug;
 MODULE_PARM_DESC(mpt2sas_fwfault_debug, " enable detection of firmware fault "
 	"and halt firmware - (default=0)");
@@ -2104,7 +2100,7 @@ _base_display_ioc_capabilities(struct MP
 }
 
 /**
- * _base_update_missing_delay - change the missing delay timers
+ * mpt2sas_base_update_missing_delay - change the missing delay timers
  * @ioc: per adapter object
  * @device_missing_delay: amount of time till device is reported missing
  * @io_missing_delay: interval IO is returned when there is a missing device
@@ -2115,8 +2111,8 @@ _base_display_ioc_capabilities(struct MP
  * delay, as well as the io missing delay. This should be called at driver
  * load time.
  */
-static void
-_base_update_missing_delay(struct MPT2SAS_ADAPTER *ioc,
+void
+mpt2sas_base_update_missing_delay(struct MPT2SAS_ADAPTER *ioc,
 	u16 device_missing_delay, u8 io_missing_delay)
 {
 	u16 dmd, dmd_new, dmd_orignal;
@@ -4302,9 +4298,6 @@ mpt2sas_base_attach(struct MPT2SAS_ADAPT
 	if (r)
 		goto out_free_resources;
 
-	if (missing_delay[0] != -1 && missing_delay[1] != -1)
-		_base_update_missing_delay(ioc, missing_delay[0],
-		    missing_delay[1]);
 
 	return 0;
 
--- a/drivers/scsi/mpt2sas/mpt2sas_base.h
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.h
@@ -1029,6 +1029,9 @@ void mpt2sas_base_validate_event_type(st
 
 void mpt2sas_halt_firmware(struct MPT2SAS_ADAPTER *ioc);
 
+void mpt2sas_base_update_missing_delay(struct MPT2SAS_ADAPTER *ioc,
+	u16 device_missing_delay, u8 io_missing_delay);
+
 int mpt2sas_port_enable(struct MPT2SAS_ADAPTER *ioc);
 
 /* scsih shared API */
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -101,6 +101,10 @@ static ushort max_sectors = 0xFFFF;
 module_param(max_sectors, ushort, 0);
 MODULE_PARM_DESC(max_sectors, "max sectors, range 64 to 8192  default=8192");
 
+static int missing_delay[2] = {-1, -1};
+module_param_array(missing_delay, int, NULL, 0);
+MODULE_PARM_DESC(missing_delay, " device missing delay , io missing delay");
+
 /* scsi-mid layer global parmeter is max_report_luns, which is 511 */
 #define MPT2SAS_MAX_LUN (16895)
 static int max_lun = MPT2SAS_MAX_LUN;
@@ -7206,7 +7210,9 @@ _firmware_event_work(struct work_struct
 	case MPT2SAS_PORT_ENABLE_COMPLETE:
 		ioc->start_scan = 0;
 
-
+		if (missing_delay[0] != -1 && missing_delay[1] != -1)
+			mpt2sas_base_update_missing_delay(ioc, missing_delay[0],
+				missing_delay[1]);
 
 		dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "port enable: complete "
 		    "from worker thread\n", ioc->name));

[26/85] drivers: hv: switch to use mb() instead of smp_mb()

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Jason Wang <jasowang@redhat.com>

commit 35848f68b07df3f917cb13fc3c134718669f569b upstream.

Even if guest were compiled without SMP support, it could not assume that host
wasn't. So switch to use mb() instead of smp_mb() to force memory barriers for
UP guest.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2:
 - Drop changes to functions that don't exist here
 - hv_ringbuffer_write() has only a write memory barrier]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
--- a/drivers/hv/ring_buffer.c
+++ b/drivers/hv/ring_buffer.c
@@ -383,7 +383,7 @@ int hv_ringbuffer_write(struct hv_ring_b
 					     sizeof(u64));
 
 	/* Make sure we flush all writes before updating the writeIndex */
-	smp_wmb();
+	wmb();
 
 	/* Now, update the write location */
 	hv_set_next_write_location(outring_info, next_write_location);
--- a/drivers/hv/vmbus_drv.c
+++ b/drivers/hv/vmbus_drv.c
@@ -466,7 +466,7 @@ static void vmbus_on_msg_dpc(unsigned lo
 		 * will not deliver any more messages since there is
 		 * no empty slot
 		 */
-		smp_mb();
+		mb();
 
 		if (msg->header.message_flags.msg_pending) {
 			/*

[74/85] perf: Clone child context from parent context pmu

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Jiri Olsa <jolsa@redhat.com>

commit 734df5ab549ca44f40de0f07af1c8803856dfb18 upstream.

Currently when the child context for inherited events is
created, it's based on the pmu object of the first event
of the parent context.

This is wrong for the following scenario:

  - HW context having HW and SW event
  - HW event got removed (closed)
  - SW event stays in HW context as the only event
    and its pmu is used to clone the child context

The issue starts when the cpu context object is touched
based on the pmu context object (__get_cpu_context). In
this case the HW context will work with SW cpu context
ending up with following WARN below.

Fixing this by using parent context pmu object to clone
from child context.

Addresses the following warning reported by Vince Weaver:

[ 2716.472065] ------------[ cut here ]------------
[ 2716.476035] WARNING: at kernel/events/core.c:2122 task_ctx_sched_out+0x3c/0x)
[ 2716.476035] Modules linked in: nfsd auth_rpcgss oid_registry nfs_acl nfs locn
[ 2716.476035] CPU: 0 PID: 3164 Comm: perf_fuzzer Not tainted 3.10.0-rc4 #2
[ 2716.476035] Hardware name: AOpen   DE7000/nMCP7ALPx-DE R1.06 Oct.19.2012, BI2
[ 2716.476035]  0000000000000000 ffffffff8102e215 0000000000000000 ffff88011fc18
[ 2716.476035]  ffff8801175557f0 0000000000000000 ffff880119fda88c ffffffff810ad
[ 2716.476035]  ffff880119fda880 ffffffff810af02a 0000000000000009 ffff880117550
[ 2716.476035] Call Trace:
[ 2716.476035]  [<ffffffff8102e215>] ? warn_slowpath_common+0x5b/0x70
[ 2716.476035]  [<ffffffff810ab2bd>] ? task_ctx_sched_out+0x3c/0x5f
[ 2716.476035]  [<ffffffff810af02a>] ? perf_event_exit_task+0xbf/0x194
[ 2716.476035]  [<ffffffff81032a37>] ? do_exit+0x3e7/0x90c
[ 2716.476035]  [<ffffffff810cd5ab>] ? __do_fault+0x359/0x394
[ 2716.476035]  [<ffffffff81032fe6>] ? do_group_exit+0x66/0x98
[ 2716.476035]  [<ffffffff8103dbcd>] ? get_signal_to_deliver+0x479/0x4ad
[ 2716.476035]  [<ffffffff810ac05c>] ? __perf_event_task_sched_out+0x230/0x2d1
[ 2716.476035]  [<ffffffff8100205d>] ? do_signal+0x3c/0x432
[ 2716.476035]  [<ffffffff810abbf9>] ? ctx_sched_in+0x43/0x141
[ 2716.476035]  [<ffffffff810ac2ca>] ? perf_event_context_sched_in+0x7a/0x90
[ 2716.476035]  [<ffffffff810ac311>] ? __perf_event_task_sched_in+0x31/0x118
[ 2716.476035]  [<ffffffff81050dd9>] ? mmdrop+0xd/0x1c
[ 2716.476035]  [<ffffffff81051a39>] ? finish_task_switch+0x7d/0xa6
[ 2716.476035]  [<ffffffff81002473>] ? do_notify_resume+0x20/0x5d
[ 2716.476035]  [<ffffffff813654f5>] ? retint_signal+0x3d/0x78
[ 2716.476035] ---[ end trace 827178d8a5966c3d ]---

Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1373384651-6109-1-git-send-email-jolsa@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 kernel/events/core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -6797,7 +6797,7 @@ inherit_task_group(struct perf_event *ev
 		 * child.
 		 */
 
-		child_ctx = alloc_perf_context(event->pmu, child);
+		child_ctx = alloc_perf_context(parent_ctx->pmu, child);
 		if (!child_ctx)
 			return -ENOMEM;
 

[65/85] drivers/dma/pl330.c: fix locking in pl330_free_chan_resources()

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

commit da331ba8e9c5de72a27e50f71105395bba6eebe0 upstream.

tasklet_kill() may sleep so call it before taking pch->lock.

Fixes following lockup:

  BUG: scheduling while atomic: cat/2383/0x00000002
  Modules linked in:
    unwind_backtrace+0x0/0xfc
    __schedule_bug+0x4c/0x58
    __schedule+0x690/0x6e0
    sys_sched_yield+0x70/0x78
    tasklet_kill+0x34/0x8c
    pl330_free_chan_resources+0x24/0x88
    dma_chan_put+0x4c/0x50
  [...]
  BUG: spinlock lockup suspected on CPU#0, swapper/0/0
   lock: 0xe52aa04c, .magic: dead4ead, .owner: cat/2383, .owner_cpu: 1
    unwind_backtrace+0x0/0xfc
    do_raw_spin_lock+0x194/0x204
    _raw_spin_lock_irqsave+0x20/0x28
    pl330_tasklet+0x2c/0x5a8
    tasklet_action+0xfc/0x114
    __do_softirq+0xe4/0x19c
    irq_exit+0x98/0x9c
    handle_IPI+0x124/0x16c
    gic_handle_irq+0x64/0x68
    __irq_svc+0x40/0x70
    cpuidle_wrap_enter+0x4c/0xa0
    cpuidle_enter_state+0x18/0x68
    cpuidle_idle_call+0xac/0xe0
    cpu_idle+0xac/0xf0

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Cc: Vinod Koul <vinod.koul@linux.intel.com>
Cc: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/dma/pl330.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/dma/pl330.c
+++ b/drivers/dma/pl330.c
@@ -349,10 +349,10 @@ static void pl330_free_chan_resources(st
 	struct dma_pl330_chan *pch = to_pchan(chan);
 	unsigned long flags;
 
-	spin_lock_irqsave(&pch->lock, flags);
-
 	tasklet_kill(&pch->task);
 
+	spin_lock_irqsave(&pch->lock, flags);
+
 	pl330_release_channel(pch->pl330_chid);
 	pch->pl330_chid = NULL;
 

[81/85] drivers/cdrom/cdrom.c: use kzalloc() for failing hardware

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Jonathan Salwan <jonathan.salwan@gmail.com>

commit 542db01579fbb7ea7d1f7bb9ddcef1559df660b2 upstream.

In drivers/cdrom/cdrom.c mmc_ioctl_cdrom_read_data() allocates a memory
area with kmalloc in line 2885.

  2885         cgc->buffer = kmalloc(blocksize, GFP_KERNEL);
  2886         if (cgc->buffer == NULL)
  2887                 return -ENOMEM;

In line 2908 we can find the copy_to_user function:

  2908         if (!ret && copy_to_user(arg, cgc->buffer, blocksize))

The cgc->buffer is never cleaned and initialized before this function.
If ret = 0 with the previous basic block, it's possible to display some
memory bytes in kernel space from userspace.

When we read a block from the disk it normally fills the ->buffer but if
the drive is malfunctioning there is a chance that it would only be
partially filled.  The result is an leak information to userspace.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/cdrom/cdrom.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/cdrom/cdrom.c
+++ b/drivers/cdrom/cdrom.c
@@ -2885,7 +2885,7 @@ static noinline int mmc_ioctl_cdrom_read
 	if (lba < 0)
 		return -EINVAL;
 
-	cgc->buffer = kmalloc(blocksize, GFP_KERNEL);
+	cgc->buffer = kzalloc(blocksize, GFP_KERNEL);
 	if (cgc->buffer == NULL)
 		return -ENOMEM;
 

[45/85] cgroup: fix RCU accesses to task->cgroups

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Tejun Heo <tj@kernel.org>

commit 14611e51a57df10240817d8ada510842faf0ec51 upstream.

task->cgroups is a RCU pointer pointing to struct css_set.  A task
switches to a different css_set on cgroup migration but a css_set
doesn't change once created and its pointers to cgroup_subsys_states
aren't RCU protected.

task_subsys_state[_check]() is the macro to acquire css given a task
and subsys_id pair.  It RCU-dereferences task->cgroups->subsys[] not
task->cgroups, so the RCU pointer task->cgroups ends up being
dereferenced without read_barrier_depends() after it.  It's broken.

Fix it by introducing task_css_set[_check]() which does
RCU-dereference on task->cgroups.  task_subsys_state[_check]() is
reimplemented to directly dereference ->subsys[] of the css_set
returned from task_css_set[_check]().

This removes some of sparse RCU warnings in cgroup.

v2: Fixed unbalanced parenthsis and there's no need to use
    rcu_dereference_raw() when !CONFIG_PROVE_RCU.  Both spotted by Li.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Acked-by: Li Zefan <lizefan@huawei.com>
[bwh: Backported to 3.2:
 - Adjust context
 - Remove CONFIG_PROVE_RCU condition
 - s/lockdep_is_held(&cgroup_mutex)/cgroup_lock_is_held()/]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 include/linux/cgroup.h | 58 +++++++++++++++++++++++++++++++++++++++++---------
 1 file changed, 48 insertions(+), 10 deletions(-)

--- a/include/linux/cgroup.h
+++ b/include/linux/cgroup.h
@@ -531,16 +531,54 @@ static inline struct cgroup_subsys_state
 	return cgrp->subsys[subsys_id];
 }
 
-/*
- * function to get the cgroup_subsys_state which allows for extra
- * rcu_dereference_check() conditions, such as locks used during the
- * cgroup_subsys::attach() methods.
+/**
+ * task_css_set_check - obtain a task's css_set with extra access conditions
+ * @task: the task to obtain css_set for
+ * @__c: extra condition expression to be passed to rcu_dereference_check()
+ *
+ * A task's css_set is RCU protected, initialized and exited while holding
+ * task_lock(), and can only be modified while holding both cgroup_mutex
+ * and task_lock() while the task is alive.  This macro verifies that the
+ * caller is inside proper critical section and returns @task's css_set.
+ *
+ * The caller can also specify additional allowed conditions via @__c, such
+ * as locks used during the cgroup_subsys::attach() methods.
+ */
+#define task_css_set_check(task, __c)					\
+	rcu_dereference_check((task)->cgroups,				\
+		lockdep_is_held(&(task)->alloc_lock) ||			\
+		cgroup_lock_is_held() || (__c))
+
+/**
+ * task_subsys_state_check - obtain css for (task, subsys) w/ extra access conds
+ * @task: the target task
+ * @subsys_id: the target subsystem ID
+ * @__c: extra condition expression to be passed to rcu_dereference_check()
+ *
+ * Return the cgroup_subsys_state for the (@task, @subsys_id) pair.  The
+ * synchronization rules are the same as task_css_set_check().
  */
 #define task_subsys_state_check(task, subsys_id, __c)			\
-	rcu_dereference_check(task->cgroups->subsys[subsys_id],		\
-			      lockdep_is_held(&task->alloc_lock) ||	\
-			      cgroup_lock_is_held() || (__c))
+	task_css_set_check((task), (__c))->subsys[(subsys_id)]
 
+/**
+ * task_css_set - obtain a task's css_set
+ * @task: the task to obtain css_set for
+ *
+ * See task_css_set_check().
+ */
+static inline struct css_set *task_css_set(struct task_struct *task)
+{
+	return task_css_set_check(task, false);
+}
+
+/**
+ * task_subsys_state - obtain css for (task, subsys)
+ * @task: the target task
+ * @subsys_id: the target subsystem ID
+ *
+ * See task_subsys_state_check().
+ */
 static inline struct cgroup_subsys_state *
 task_subsys_state(struct task_struct *task, int subsys_id)
 {

[71/85] hpfs: better test for errors

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>

commit 3ebacb05044f82c5f0bb456a894eb9dc57d0ed90 upstream.

The test if bitmap access is out of bound could errorneously pass if the
device size is divisible by 16384 sectors and we are asking for one bitmap
after the end.

Check for invalid size in the superblock. Invalid size could cause integer
overflows in the rest of the code.

Signed-off-by: Mikulas Patocka <mpatocka@artax.karlin.mff.cuni.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 fs/hpfs/map.c   | 3 ++-
 fs/hpfs/super.c | 8 +++++++-
 2 files changed, 9 insertions(+), 2 deletions(-)

--- a/fs/hpfs/map.c
+++ b/fs/hpfs/map.c
@@ -17,7 +17,8 @@ unsigned int *hpfs_map_bitmap(struct sup
 			 struct quad_buffer_head *qbh, char *id)
 {
 	secno sec;
-	if (hpfs_sb(s)->sb_chk) if (bmp_block * 16384 > hpfs_sb(s)->sb_fs_size) {
+	unsigned n_bands = (hpfs_sb(s)->sb_fs_size + 0x3fff) >> 14;
+	if (hpfs_sb(s)->sb_chk) if (bmp_block >= n_bands) {
 		hpfs_error(s, "hpfs_map_bitmap called with bad parameter: %08x at %s", bmp_block, id);
 		return NULL;
 	}
--- a/fs/hpfs/super.c
+++ b/fs/hpfs/super.c
@@ -553,7 +553,13 @@ static int hpfs_fill_super(struct super_
 	sbi->sb_cp_table = NULL;
 	sbi->sb_c_bitmap = -1;
 	sbi->sb_max_fwd_alloc = 0xffffff;
-	
+
+	if (sbi->sb_fs_size >= 0x80000000) {
+		hpfs_error(s, "invalid size in superblock: %08x",
+			(unsigned)sbi->sb_fs_size);
+		goto bail4;
+	}
+
 	/* Load bitmap directory */
 	if (!(sbi->sb_bmp_dir = hpfs_load_bitmap_directory(s, le32_to_cpu(superblock->bitmaps))))
 		goto bail4;

[84/85] MAINTAINERS: Greg's suse email address is dead

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Greg KH <gregkh@linuxfoundation.org>

commit 879a5a001b62a020e074d460b3a7c0fd993f9832 upstream.

My email address has changed, the suse.de one is now dead, so update all
of my MAINTAINER entries with the correct one so that patches don't get
lost.

Also change the status of some of my entries as I'm supposed to be doing
this stuff now for real.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 MAINTAINERS | 29 ++++++++++++++---------------
 1 file changed, 14 insertions(+), 15 deletions(-)

--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -159,7 +159,7 @@ S:	Maintained
 F:	drivers/net/ethernet/realtek/r8169.c
 
 8250/16?50 (AND CLONE UARTS) SERIAL DRIVER
-M:	Greg Kroah-Hartman <gregkh@suse.de>
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 L:	linux-serial@vger.kernel.org
 W:	http://serial.sourceforge.net
 S:	Maintained
@@ -1781,9 +1781,9 @@ X:	net/wireless/wext*
 
 CHAR and MISC DRIVERS
 M:	Arnd Bergmann <arnd@arndb.de>
-M:	Greg Kroah-Hartman <greg@kroah.com>
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git
-S:	Maintained
+S:	Supported
 F:	drivers/char/*
 F:	drivers/misc/*
 
@@ -2315,7 +2315,7 @@ F:	lib/lru_cache.c
 F:	Documentation/blockdev/drbd/
 
 DRIVER CORE, KOBJECTS, DEBUGFS AND SYSFS
-M:	Greg Kroah-Hartman <gregkh@suse.de>
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6.git
 S:	Supported
 F:	Documentation/kobject.txt
@@ -6257,15 +6257,15 @@ S:	Maintained
 F:	arch/alpha/kernel/srm_env.c
 
 STABLE BRANCH
-M:	Greg Kroah-Hartman <greg@kroah.com>
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 L:	stable@vger.kernel.org
-S:	Maintained
+S:	Supported
 
 STAGING SUBSYSTEM
-M:	Greg Kroah-Hartman <gregkh@suse.de>
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git
 L:	devel@driverdev.osuosl.org
-S:	Maintained
+S:	Supported
 F:	drivers/staging/
 
 STAGING - AGERE HERMES II and II.5 WIRELESS DRIVERS
@@ -6654,8 +6654,8 @@ S:	Maintained
 K:	^Subject:.*(?i)trivial
 
 TTY LAYER
-M:	Greg Kroah-Hartman <gregkh@suse.de>
-S:	Maintained
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+S:	Supported
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6.git
 F:	drivers/tty/*
 F:	drivers/tty/serial/serial_core.c
@@ -6943,7 +6943,7 @@ S:	Maintained
 F:	drivers/usb/serial/digi_acceleport.c
 
 USB SERIAL DRIVER
-M:	Greg Kroah-Hartman <gregkh@suse.de>
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 L:	linux-usb@vger.kernel.org
 S:	Supported
 F:	Documentation/usb/usb-serial.txt
@@ -6958,9 +6958,8 @@ S:	Maintained
 F:	drivers/usb/serial/empeg.c
 
 USB SERIAL KEYSPAN DRIVER
-M:	Greg Kroah-Hartman <greg@kroah.com>
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 L:	linux-usb@vger.kernel.org
-W:	http://www.kroah.com/linux/
 S:	Maintained
 F:	drivers/usb/serial/*keyspan*
 
@@ -6988,7 +6987,7 @@ F:	Documentation/video4linux/sn9c102.txt
 F:	drivers/media/video/sn9c102/
 
 USB SUBSYSTEM
-M:	Greg Kroah-Hartman <gregkh@suse.de>
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 L:	linux-usb@vger.kernel.org
 W:	http://www.linux-usb.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6.git
@@ -7075,7 +7074,7 @@ F:	fs/hppfs/
 
 USERSPACE I/O (UIO)
 M:	"Hans J. Koch" <hjk@hansjkoch.de>
-M:	Greg Kroah-Hartman <gregkh@suse.de>
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 S:	Maintained
 F:	Documentation/DocBook/uio-howto.tmpl
 F:	drivers/uio/

[21/85] Bluetooth: Fix crash in l2cap_build_cmd() with small MTU

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Anderson Lizardo <anderson.lizardo@openbossa.org>

commit 300b962e5244a1ea010df7e88595faa0085b461d upstream.

If a too small MTU value is set with ioctl(HCISETACLMTU) or by a bogus
controller, memory corruption happens due to a memcpy() call with
negative length.

Fix this crash on either incoming or outgoing connections with a MTU
smaller than L2CAP_HDR_SIZE + L2CAP_CMD_HDR_SIZE:

[   46.885433] BUG: unable to handle kernel paging request at f56ad000
[   46.888037] IP: [<c03d94cd>] memcpy+0x1d/0x40
[   46.888037] *pdpt = 0000000000ac3001 *pde = 00000000373f8067 *pte = 80000000356ad060
[   46.888037] Oops: 0002 [#1] SMP DEBUG_PAGEALLOC
[   46.888037] Modules linked in: hci_vhci bluetooth virtio_balloon i2c_piix4 uhci_hcd usbcore usb_common
[   46.888037] CPU: 0 PID: 1044 Comm: kworker/u3:0 Not tainted 3.10.0-rc1+ #12
[   46.888037] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007
[   46.888037] Workqueue: hci0 hci_rx_work [bluetooth]
[   46.888037] task: f59b15b0 ti: f55c4000 task.ti: f55c4000
[   46.888037] EIP: 0060:[<c03d94cd>] EFLAGS: 00010212 CPU: 0
[   46.888037] EIP is at memcpy+0x1d/0x40
[   46.888037] EAX: f56ac1c0 EBX: fffffff8 ECX: 3ffffc6e EDX: f55c5cf2
[   46.888037] ESI: f55c6b32 EDI: f56ad000 EBP: f55c5c68 ESP: f55c5c5c
[   46.888037]  DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[   46.888037] CR0: 8005003b CR2: f56ad000 CR3: 3557d000 CR4: 000006f0
[   46.888037] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
[   46.888037] DR6: ffff0ff0 DR7: 00000400
[   46.888037] Stack:
[   46.888037]  fffffff8 00000010 00000003 f55c5cac f8c6a54c ffffffff f8c69eb2 00000000
[   46.888037]  f4783cdc f57f0070 f759c590 1001c580 00000003 0200000a 00000000 f5a88560
[   46.888037]  f5ba2600 f5a88560 00000041 00000000 f55c5d90 f8c6f4c7 00000008 f55c5cf2
[   46.888037] Call Trace:
[   46.888037]  [<f8c6a54c>] l2cap_send_cmd+0x1cc/0x230 [bluetooth]
[   46.888037]  [<f8c69eb2>] ? l2cap_global_chan_by_psm+0x152/0x1a0 [bluetooth]
[   46.888037]  [<f8c6f4c7>] l2cap_connect+0x3f7/0x540 [bluetooth]
[   46.888037]  [<c019b37b>] ? trace_hardirqs_off+0xb/0x10
[   46.888037]  [<c01a0ff8>] ? mark_held_locks+0x68/0x110
[   46.888037]  [<c064ad20>] ? mutex_lock_nested+0x280/0x360
[   46.888037]  [<c064b9d9>] ? __mutex_unlock_slowpath+0xa9/0x150
[   46.888037]  [<c01a118c>] ? trace_hardirqs_on_caller+0xec/0x1b0
[   46.888037]  [<c064ad08>] ? mutex_lock_nested+0x268/0x360
[   46.888037]  [<c01a125b>] ? trace_hardirqs_on+0xb/0x10
[   46.888037]  [<f8c72f8d>] l2cap_recv_frame+0xb2d/0x1d30 [bluetooth]
[   46.888037]  [<c01a0ff8>] ? mark_held_locks+0x68/0x110
[   46.888037]  [<c064b9d9>] ? __mutex_unlock_slowpath+0xa9/0x150
[   46.888037]  [<c01a118c>] ? trace_hardirqs_on_caller+0xec/0x1b0
[   46.888037]  [<f8c754f1>] l2cap_recv_acldata+0x2a1/0x320 [bluetooth]
[   46.888037]  [<f8c491d8>] hci_rx_work+0x518/0x810 [bluetooth]
[   46.888037]  [<f8c48df2>] ? hci_rx_work+0x132/0x810 [bluetooth]
[   46.888037]  [<c0158979>] process_one_work+0x1a9/0x600
[   46.888037]  [<c01588fb>] ? process_one_work+0x12b/0x600
[   46.888037]  [<c015922e>] ? worker_thread+0x19e/0x320
[   46.888037]  [<c015922e>] ? worker_thread+0x19e/0x320
[   46.888037]  [<c0159187>] worker_thread+0xf7/0x320
[   46.888037]  [<c0159090>] ? rescuer_thread+0x290/0x290
[   46.888037]  [<c01602f8>] kthread+0xa8/0xb0
[   46.888037]  [<c0656777>] ret_from_kernel_thread+0x1b/0x28
[   46.888037]  [<c0160250>] ? flush_kthread_worker+0x120/0x120
[   46.888037] Code: c3 90 8d 74 26 00 e8 63 fc ff ff eb e8 90 55 89 e5 83 ec 0c 89 5d f4 89 75 f8 89 7d fc 3e 8d 74 26 00 89 cb 89 c7 c1 e9 02 89 d6 <f3> a5 89 d9 83 e1 03 74 02 f3 a4 8b 5d f4 8b 75 f8 8b 7d fc 89
[   46.888037] EIP: [<c03d94cd>] memcpy+0x1d/0x40 SS:ESP 0068:f55c5c5c
[   46.888037] CR2: 00000000f56ad000
[   46.888037] ---[ end trace 0217c1f4d78714a9 ]---

Signed-off-by: Anderson Lizardo <anderson.lizardo@openbossa.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 net/bluetooth/l2cap_core.c | 3 +++
 1 file changed, 3 insertions(+)

--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -1737,6 +1737,9 @@ static struct sk_buff *l2cap_build_cmd(s
 	BT_DBG("conn %p, code 0x%2.2x, ident 0x%2.2x, len %d",
 			conn, code, ident, dlen);
 
+	if (conn->mtu < L2CAP_HDR_SIZE + L2CAP_CMD_HDR_SIZE)
+		return NULL;
+
 	len = L2CAP_HDR_SIZE + L2CAP_CMD_HDR_SIZE + dlen;
 	count = min_t(unsigned int, conn->mtu, len);
 

[80/85] pch_uart: fix a deadlock when pch_uart as console

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Liang Li <liang.li@windriver.com>

commit 384e301e3519599b000c1a2ecd938b533fc15d85 upstream.

When we use pch_uart as system console like 'console=ttyPCH0,115200',
then 'send break' to it. We'll encounter the deadlock on a cpu/core,
with interrupts disabled on the core. When we happen to have all irqs
affinity to cpu0 then the deadlock on cpu0 actually deadlock whole
system.

In pch_uart_interrupt, we have spin_lock_irqsave(&priv->lock, flags)
then call pch_uart_err_ir when break is received. Then the call to
dev_err would actually call to pch_console_write then we'll run into
another spin_lock(&priv->lock), with interrupts disabled.

So in the call sequence lead by pch_uart_interrupt, we should be
carefully to call functions that will 'print message to console' only
in case the uart port is not being used as serial console.

Signed-off-by: Liang Li <liang.li@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/tty/serial/pch_uart.c | 29 ++++++++++++++++++++++-------
 1 file changed, 22 insertions(+), 7 deletions(-)

--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -940,22 +940,37 @@ static unsigned int dma_handle_tx(struct
 static void pch_uart_err_ir(struct eg20t_port *priv, unsigned int lsr)
 {
 	u8 fcr = ioread8(priv->membase + UART_FCR);
+	struct uart_port *port = &priv->port;
+	struct tty_struct *tty = tty_port_tty_get(&port->state->port);
+	char   *error_msg[5] = {};
+	int    i = 0;
 
 	/* Reset FIFO */
 	fcr |= UART_FCR_CLEAR_RCVR;
 	iowrite8(fcr, priv->membase + UART_FCR);
 
 	if (lsr & PCH_UART_LSR_ERR)
-		dev_err(&priv->pdev->dev, "Error data in FIFO\n");
+		error_msg[i++] = "Error data in FIFO\n";
 
-	if (lsr & UART_LSR_FE)
-		dev_err(&priv->pdev->dev, "Framing Error\n");
-
-	if (lsr & UART_LSR_PE)
-		dev_err(&priv->pdev->dev, "Parity Error\n");
-
-	if (lsr & UART_LSR_OE)
-		dev_err(&priv->pdev->dev, "Overrun Error\n");
+	if (lsr & UART_LSR_FE) {
+		port->icount.frame++;
+		error_msg[i++] = "  Framing Error\n";
+	}
+
+	if (lsr & UART_LSR_PE) {
+		port->icount.parity++;
+		error_msg[i++] = "  Parity Error\n";
+	}
+
+	if (lsr & UART_LSR_OE) {
+		port->icount.overrun++;
+		error_msg[i++] = "  Overrun Error\n";
+	}
+
+	if (tty == NULL) {
+		for (i = 0; error_msg[i] != NULL; i++)
+			dev_err(&priv->pdev->dev, error_msg[i]);
+	}
 }
 
 static irqreturn_t pch_uart_interrupt(int irq, void *dev_id)

[03/85] [SCSI] zfcp: fix adapter (re)open recovery while link to SAN is down

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Daniel Hansel <daniel.hansel@linux.vnet.ibm.com>

commit f76ccaac4f82c463a037aa4a1e4ccb85c7011814 upstream.

FCP device remains in status ERP_FAILED when device is switched online
or adapter recovery is triggered  while link to SAN is down.

When Exchange Configuration Data command returns the FSF status
FSF_EXCHANGE_CONFIG_DATA_INCOMPLETE it aborts the exchange process.
The only retries are done during the common error recovery procedure
(i.e. max. 3 retries with 8sec sleep between) and remains in status
ERP_FAILED with QDIO down.

This commit reverts the commit 0df138476c8306478d6e726f044868b4bccf411c
(zfcp: Fix adapter activation on link down).
When FSF status FSF_EXCHANGE_CONFIG_DATA_INCOMPLETE is received the
adapter recovery will be finished without any retries. QDIO will be
up now and status changes such as LINK UP will be received now.

Signed-off-by: Daniel Hansel <daniel.hansel@linux.vnet.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/s390/scsi/zfcp_fsf.c | 4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/s390/scsi/zfcp_fsf.c
+++ b/drivers/s390/scsi/zfcp_fsf.c
@@ -534,6 +534,10 @@ static void zfcp_fsf_exchange_config_dat
 		fc_host_port_type(shost) = FC_PORTTYPE_UNKNOWN;
 		adapter->hydra_version = 0;
 
+		/* avoids adapter shutdown to be able to recognize
+		 * events such as LINK UP */
+		atomic_set_mask(ZFCP_STATUS_ADAPTER_XCONFIG_OK,
+				&adapter->status);
 		zfcp_fsf_link_down_info_eval(req,
 			&qtcb->header.fsf_status_qual.link_down_info);
 		break;

[50/85] writeback: Fix periodic writeback after fs mount

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Jan Kara <jack@suse.cz>

commit a5faeaf9109578e65e1a32e2a3e76c8b47e7dcb6 upstream.

Code in blkdev.c moves a device inode to default_backing_dev_info when
the last reference to the device is put and moves the device inode back
to its bdi when the first reference is acquired. This includes moving to
wb.b_dirty list if the device inode is dirty. The code however doesn't
setup timer to wake corresponding flusher thread and while wb.b_dirty
list is non-empty __mark_inode_dirty() will not set it up either. Thus
periodic writeback is effectively disabled until a sync(2) call which can
lead to unexpected data loss in case of crash or power failure.

Fix the problem by setting up a timer for periodic writeback in case we
add the first dirty inode to wb.b_dirty list in bdev_inode_switch_bdi().

Reported-by: Bert De Jonghe <Bert.DeJonghe@amplidata.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 fs/block_dev.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -55,17 +55,24 @@ static void bdev_inode_switch_bdi(struct
 			struct backing_dev_info *dst)
 {
 	struct backing_dev_info *old = inode->i_data.backing_dev_info;
+	bool wakeup_bdi = false;
 
 	if (unlikely(dst == old))		/* deadlock avoidance */
 		return;
 	bdi_lock_two(&old->wb, &dst->wb);
 	spin_lock(&inode->i_lock);
 	inode->i_data.backing_dev_info = dst;
-	if (inode->i_state & I_DIRTY)
+	if (inode->i_state & I_DIRTY) {
+		if (bdi_cap_writeback_dirty(dst) && !wb_has_dirty_io(&dst->wb))
+			wakeup_bdi = true;
 		list_move(&inode->i_wb_list, &dst->wb.b_dirty);
+	}
 	spin_unlock(&inode->i_lock);
 	spin_unlock(&old->wb.list_lock);
 	spin_unlock(&dst->wb.list_lock);
+
+	if (wakeup_bdi)
+		bdi_wakeup_thread_delayed(dst);
 }
 
 sector_t blkdev_max_block(struct block_device *bdev)

[27/85] [media] media: dmxdev: remove dvb_ringbuffer_flush() on writer side

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Soeren Moch <smoch@web.de>

commit 414abbd2cd4c2618895f02ed3a76ec6647281436 upstream.

In dvb_ringbuffer lock-less synchronizationof reader and writer threads is done
with separateread and write pointers. Sincedvb_ringbuffer_flush() modifies the
read pointer, this function must not be called from the writer thread.
This patch removes the dvb_ringbuffer_flush() calls in the dmxdev ringbuffer
write functions, this fixes Oopses "Unable to handle kernel paging request"
I could observe for the call chaindvb_demux_read ->dvb_dmxdev_buffer_read ->
dvb_ringbuffer_read_user -> __copy_to_user (the reader side of the ringbuffer).
The flush calls at the write side are not necessary anyway since ringbuffer_flush
is also called in dvb_dmxdev_buffer_read() when an error condition is set in the
ringbuffer.
This patch should also be applied to stable kernels.

Signed-off-by: Soeren Moch <smoch@web.de>
Reviewed-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/media/dvb/dvb-core/dmxdev.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

--- a/drivers/media/dvb/dvb-core/dmxdev.c
+++ b/drivers/media/dvb/dvb-core/dmxdev.c
@@ -380,10 +380,8 @@ static int dvb_dmxdev_section_callback(c
 		ret = dvb_dmxdev_buffer_write(&dmxdevfilter->buffer, buffer2,
 					      buffer2_len);
 	}
-	if (ret < 0) {
-		dvb_ringbuffer_flush(&dmxdevfilter->buffer);
+	if (ret < 0)
 		dmxdevfilter->buffer.error = ret;
-	}
 	if (dmxdevfilter->params.sec.flags & DMX_ONESHOT)
 		dmxdevfilter->state = DMXDEV_STATE_DONE;
 	spin_unlock(&dmxdevfilter->dev->lock);
@@ -419,10 +417,8 @@ static int dvb_dmxdev_ts_callback(const
 	ret = dvb_dmxdev_buffer_write(buffer, buffer1, buffer1_len);
 	if (ret == buffer1_len)
 		ret = dvb_dmxdev_buffer_write(buffer, buffer2, buffer2_len);
-	if (ret < 0) {
-		dvb_ringbuffer_flush(buffer);
+	if (ret < 0)
 		buffer->error = ret;
-	}
 	spin_unlock(&dmxdevfilter->dev->lock);
 	wake_up(&buffer->queue);
 	return 0;

[29/85] hw_breakpoint: Use cpu_possible_mask in {reserve,release}_bp_slot()

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Oleg Nesterov <oleg@redhat.com>

commit c790b0ad23f427c7522ffed264706238c57c007e upstream.

fetch_bp_busy_slots() and toggle_bp_slot() use
for_each_online_cpu(), this is obviously wrong wrt cpu_up() or
cpu_down(), we can over/under account the per-cpu numbers.

For example:

	# echo 0 >> /sys/devices/system/cpu/cpu1/online
	# perf record -e mem:0x10 -p 1 &
	# echo 1 >> /sys/devices/system/cpu/cpu1/online
	# perf record -e mem:0x10,mem:0x10,mem:0x10,mem:0x10 -C1 -a &
	# taskset -p 0x2 1

triggers the same WARN_ONCE("Can't find any breakpoint slot") in
arch_install_hw_breakpoint().

Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/20130620155009.GA6327@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 kernel/events/hw_breakpoint.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/kernel/events/hw_breakpoint.c
+++ b/kernel/events/hw_breakpoint.c
@@ -147,7 +147,7 @@ fetch_bp_busy_slots(struct bp_busy_slots
 		return;
 	}
 
-	for_each_online_cpu(cpu) {
+	for_each_possible_cpu(cpu) {
 		unsigned int nr;
 
 		nr = per_cpu(nr_cpu_bp_pinned[type], cpu);
@@ -233,7 +233,7 @@ toggle_bp_slot(struct perf_event *bp, bo
 	if (cpu >= 0) {
 		toggle_bp_task_slot(bp, cpu, enable, type, weight);
 	} else {
-		for_each_online_cpu(cpu)
+		for_each_possible_cpu(cpu)
 			toggle_bp_task_slot(bp, cpu, enable, type, weight);
 	}
 

[25/85] xhci: check for failed dma pool allocation

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Mathias Nyman <mathias.nyman@linux.intel.com>

commit 025f880cb2e4d7218d0422d4b07bea1a68959c38 upstream.

Fail and free the container context in case dma_pool_alloc() can't allocate
the raw context data part of it

This patch should be backported to kernels as old as 2.6.31, that
contain the commit d115b04818e57bdbc7ccde4d0660b15e33013dc8 "USB: xhci:
Support for 64-byte contexts".

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: John Youn <johnyoun@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/usb/host/xhci-mem.c | 4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -271,6 +271,10 @@ static struct xhci_container_ctx *xhci_a
 		ctx->size += CTX_SIZE(xhci->hcc_params);
 
 	ctx->bytes = dma_pool_alloc(xhci->device_pool, flags, &ctx->dma);
+	if (!ctx->bytes) {
+		kfree(ctx);
+		return NULL;
+	}
 	memset(ctx->bytes, 0, ctx->size);
 	return ctx;
 }

[63/85] Input: bcm5974 - add support for the 2013 MacBook Air

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Dmitry Torokhov <rydberg@euromail.se>

commit 148c1c8ad3c4170186ebe6ea5900adde27d2a0e7 upstream.

The June 2013 Macbook Air (13'') has a new trackpad protocol; four new
values are inserted in the header, and the mode switch is no longer
needed. This patch adds support for the new devices.

Reported-and-tested-by: Brad Ford <plymouthffl@gmail.com>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
[bwh: Backported to 3.2: format of limits in bcm5974 changed]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/input/mouse/bcm5974.c | 36 ++++++++++++++++++++++++++++++++++--
 1 file changed, 34 insertions(+), 2 deletions(-)

--- a/drivers/input/mouse/bcm5974.c
+++ b/drivers/input/mouse/bcm5974.c
@@ -87,6 +87,10 @@
 #define USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI	0x0259
 #define USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO	0x025a
 #define USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS	0x025b
+/* MacbookAir6,2 (unibody, June 2013) */
+#define USB_DEVICE_ID_APPLE_WELLSPRING8_ANSI	0x0291
+#define USB_DEVICE_ID_APPLE_WELLSPRING8_ISO	0x0292
+#define USB_DEVICE_ID_APPLE_WELLSPRING8_JIS	0x0293
 
 #define BCM5974_DEVICE(prod) {					\
 	.match_flags = (USB_DEVICE_ID_MATCH_DEVICE |		\
@@ -144,6 +148,10 @@ static const struct usb_device_id bcm597
 	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI),
 	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO),
 	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS),
+	/* MacbookAir6,2 */
+	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING8_ANSI),
+	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING8_ISO),
+	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING8_JIS),
 	/* Terminating entry */
 	{}
 };
@@ -171,15 +179,18 @@ struct bt_data {
 /* trackpad header types */
 enum tp_type {
 	TYPE1,			/* plain trackpad */
-	TYPE2			/* button integrated in trackpad */
+	TYPE2,			/* button integrated in trackpad */
+	TYPE3			/* additional header fields since June 2013 */
 };
 
 /* trackpad finger data offsets, le16-aligned */
 #define FINGER_TYPE1		(13 * sizeof(__le16))
 #define FINGER_TYPE2		(15 * sizeof(__le16))
+#define FINGER_TYPE3		(19 * sizeof(__le16))
 
 /* trackpad button data offsets */
 #define BUTTON_TYPE2		15
+#define BUTTON_TYPE3		23
 
 /* list of device capability bits */
 #define HAS_INTEGRATED_BUTTON	1
@@ -394,6 +405,18 @@ static const struct bcm5974_config bcm59
 		{ DIM_X, DIM_X / SN_COORD, -4750, 5280 },
 		{ DIM_Y, DIM_Y / SN_COORD, -150, 6730 }
 	},
+	{
+		USB_DEVICE_ID_APPLE_WELLSPRING8_ANSI,
+		USB_DEVICE_ID_APPLE_WELLSPRING8_ISO,
+		USB_DEVICE_ID_APPLE_WELLSPRING8_JIS,
+		HAS_INTEGRATED_BUTTON,
+		0, sizeof(struct bt_data),
+		0x83, TYPE3, FINGER_TYPE3, FINGER_TYPE3 + SIZEOF_ALL_FINGERS,
+		{ DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 300 },
+		{ DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 },
+		{ DIM_X, DIM_X / SN_COORD, -4620, 5140 },
+		{ DIM_Y, DIM_Y / SN_COORD, -150, 6600 },
+	},
 	{}
 };
 
@@ -604,6 +627,9 @@ static int report_tp_state(struct bcm597
 	if (c->tp_type == TYPE2)
 		input_report_key(input, BTN_LEFT, ibt);
 
+	if (c->tp_type == TYPE3)
+		input_report_key(input, BTN_LEFT, dev->tp_data[BUTTON_TYPE3]);
+
 	input_sync(input);
 
 	return 0;
@@ -619,9 +645,14 @@ static int report_tp_state(struct bcm597
 
 static int bcm5974_wellspring_mode(struct bcm5974 *dev, bool on)
 {
-	char *data = kmalloc(8, GFP_KERNEL);
 	int retval = 0, size;
+	char *data;
+
+	/* Type 3 does not require a mode switch */
+	if (dev->cfg.tp_type == TYPE3)
+		return 0;
 
+	data = kmalloc(8, GFP_KERNEL);
 	if (!data) {
 		err("bcm5974: out of memory");
 		retval = -ENOMEM;

[67/85] block: do not pass disk names as format strings

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Kees Cook <keescook@chromium.org>

commit ffc8b30866879ed9ba62bd0a86fecdbd51cd3d19 upstream.

Disk names may contain arbitrary strings, so they must not be
interpreted as format strings.  It seems that only md allows arbitrary
strings to be used for disk names, but this could allow for a local
memory corruption from uid 0 into ring 0.

CVE-2013-2851

Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[bwh: Backported to 3.2: adjust device pointer name in nbd.c]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 block/genhd.c              | 2 +-
 drivers/block/nbd.c        | 3 ++-
 drivers/scsi/osd/osd_uld.c | 2 +-
 3 files changed, 4 insertions(+), 3 deletions(-)

--- a/block/genhd.c
+++ b/block/genhd.c
@@ -519,7 +519,7 @@ void register_disk(struct gendisk *disk)
 
 	ddev->parent = disk->driverfs_dev;
 
-	dev_set_name(ddev, disk->disk_name);
+	dev_set_name(ddev, "%s", disk->disk_name);
 
 	/* delay uevents, until we scanned partition table */
 	dev_set_uevent_suppress(ddev, 1);
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -675,7 +675,8 @@ static int __nbd_ioctl(struct block_devi
 
 		mutex_unlock(&lo->tx_lock);
 
-		thread = kthread_create(nbd_thread, lo, lo->disk->disk_name);
+		thread = kthread_create(nbd_thread, lo, "%s",
+					lo->disk->disk_name);
 		if (IS_ERR(thread)) {
 			mutex_lock(&lo->tx_lock);
 			return PTR_ERR(thread);
--- a/drivers/scsi/osd/osd_uld.c
+++ b/drivers/scsi/osd/osd_uld.c
@@ -465,7 +465,7 @@ static int osd_probe(struct device *dev)
 	oud->class_dev.class = &osd_uld_class;
 	oud->class_dev.parent = dev;
 	oud->class_dev.release = __remove;
-	error = dev_set_name(&oud->class_dev, disk->disk_name);
+	error = dev_set_name(&oud->class_dev, "%s", disk->disk_name);
 	if (error) {
 		OSD_ERR("dev_set_name failed => %d\n", error);
 		goto err_put_cdev;

[61/85] HID: Add support for the MacBook Pro 10,2 keyboard / touchpad

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Dirk Hohndel <dirk@hohndel.org>

commit 8d80da90f53d37cf6caefc61353e1cc3a145b9e0 upstream.

This enables the existing drivers for keyboard and touchpad with the new
USB IDs found on the MBP 13" Reasonable Resolution (also known as the
Retina Display).

Added entries to both keyboard and mouse ignore lists.

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
[bwh: Backported to 3.2: format of limits in bcm5974 changed]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/hid/hid-apple.c       |  6 ++++++
 drivers/hid/hid-core.c        |  6 ++++++
 drivers/hid/hid-ids.h         |  3 +++
 drivers/input/mouse/bcm5974.c | 21 +++++++++++++++++++++
 4 files changed, 36 insertions(+)

--- a/drivers/hid/hid-apple.c
+++ b/drivers/hid/hid-apple.c
@@ -523,6 +523,12 @@ static const struct hid_device_id apple_
 		.driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_JIS),
 		.driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI),
+		.driver_data = APPLE_HAS_FN },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO),
+		.driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS),
+		.driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI),
 		.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO),
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1383,6 +1383,9 @@ static const struct hid_device_id hid_ha
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ISO) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_JIS) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS) },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI) },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO) },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS) },
@@ -1989,6 +1992,9 @@ static const struct hid_device_id hid_mo
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ISO) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_JIS) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) },
 	{ }
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -119,6 +119,9 @@
 #define USB_DEVICE_ID_APPLE_WELLSPRING5A_ANSI	0x0252
 #define USB_DEVICE_ID_APPLE_WELLSPRING5A_ISO	0x0253
 #define USB_DEVICE_ID_APPLE_WELLSPRING5A_JIS	0x0254
+#define USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI	0x0259
+#define USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO	0x025a
+#define USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS	0x025b
 #define USB_DEVICE_ID_APPLE_WELLSPRING6A_ANSI	0x0249
 #define USB_DEVICE_ID_APPLE_WELLSPRING6A_ISO	0x024a
 #define USB_DEVICE_ID_APPLE_WELLSPRING6A_JIS	0x024b
--- a/drivers/input/mouse/bcm5974.c
+++ b/drivers/input/mouse/bcm5974.c
@@ -83,6 +83,10 @@
 #define USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI	0x0262
 #define USB_DEVICE_ID_APPLE_WELLSPRING7_ISO	0x0263
 #define USB_DEVICE_ID_APPLE_WELLSPRING7_JIS	0x0264
+/* MacbookPro10,2 (unibody, October 2012) */
+#define USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI	0x0259
+#define USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO	0x025a
+#define USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS	0x025b
 
 #define BCM5974_DEVICE(prod) {					\
 	.match_flags = (USB_DEVICE_ID_MATCH_DEVICE |		\
@@ -136,6 +140,10 @@ static const struct usb_device_id bcm597
 	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI),
 	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7_ISO),
 	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7_JIS),
+	/* MacbookPro10,2 */
+	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI),
+	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO),
+	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS),
 	/* Terminating entry */
 	{}
 };
@@ -369,6 +377,18 @@ static const struct bcm5974_config bcm59
 		HAS_INTEGRATED_BUTTON,
 		0x84, sizeof(struct bt_data),
 		0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS,
+		{ DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 300 },
+		{ DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 },
+		{ DIM_X, DIM_X / SN_COORD, -4750, 5280 },
+		{ DIM_Y, DIM_Y / SN_COORD, -150, 6730 }
+	},
+	{
+		USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI,
+		USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO,
+		USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS,
+		HAS_INTEGRATED_BUTTON,
+		0x84, sizeof(struct bt_data),
+		0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS,
 		{ DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 300 },
 		{ DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 },
 		{ DIM_X, DIM_X / SN_COORD, -4750, 5280 },

[39/85] futex: Take hugepages into account when generating futex_key

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Zhang Yi <wetpzy@gmail.com>

commit 13d60f4b6ab5b702dc8d2ee20999f98a93728aec upstream.

The futex_keys of process shared futexes are generated from the page
offset, the mapping host and the mapping index of the futex user space
address. This should result in an unique identifier for each futex.

Though this is not true when futexes are located in different subpages
of an hugepage. The reason is, that the mapping index for all those
futexes evaluates to the index of the base page of the hugetlbfs
mapping. So a futex at offset 0 of the hugepage mapping and another
one at offset PAGE_SIZE of the same hugepage mapping have identical
futex_keys. This happens because the futex code blindly uses
page->index.

Steps to reproduce the bug:

1. Map a file from hugetlbfs. Initialize pthread_mutex1 at offset 0
   and pthread_mutex2 at offset PAGE_SIZE of the hugetlbfs
   mapping.

   The mutexes must be initialized as PTHREAD_PROCESS_SHARED because
   PTHREAD_PROCESS_PRIVATE mutexes are not affected by this issue as
   their keys solely depend on the user space address.

2. Lock mutex1 and mutex2

3. Create thread1 and in the thread function lock mutex1, which
   results in thread1 blocking on the locked mutex1.

4. Create thread2 and in the thread function lock mutex2, which
   results in thread2 blocking on the locked mutex2.

5. Unlock mutex2. Despite the fact that mutex2 got unlocked, thread2
   still blocks on mutex2 because the futex_key points to mutex1.

To solve this issue we need to take the normal page index of the page
which contains the futex into account, if the futex is in an hugetlbfs
mapping. In other words, we calculate the normal page mapping index of
the subpage in the hugetlbfs mapping.

Mappings which are not based on hugetlbfs are not affected and still
use page->index.

Thanks to Mel Gorman who provided a patch for adding proper evaluation
functions to the hugetlbfs code to avoid exposing hugetlbfs specific
details to the futex code.

[ tglx: Massaged changelog ]

Signed-off-by: Zhang Yi <zhang.yi20@zte.com.cn>
Reviewed-by: Jiang Biao <jiang.biao2@zte.com.cn>
Tested-by: Ma Chenggong <ma.chenggong@zte.com.cn>
Reviewed-by: 'Mel Gorman' <mgorman@suse.de>
Acked-by: 'Darren Hart' <dvhart@linux.intel.com>
Cc: 'Peter Zijlstra' <peterz@infradead.org>
Link: http://lkml.kernel.org/r/000101ce71a6%24a83c5880%24f8b50980%24@com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 include/linux/hugetlb.h | 16 ++++++++++++++++
 kernel/futex.c          |  3 ++-
 mm/hugetlb.c            | 17 +++++++++++++++++
 3 files changed, 35 insertions(+), 1 deletion(-)

--- a/include/linux/hugetlb.h
+++ b/include/linux/hugetlb.h
@@ -327,6 +327,17 @@ static inline unsigned hstate_index_to_s
 	return hstates[index].order + PAGE_SHIFT;
 }
 
+pgoff_t __basepage_index(struct page *page);
+
+/* Return page->index in PAGE_SIZE units */
+static inline pgoff_t basepage_index(struct page *page)
+{
+	if (!PageCompound(page))
+		return page->index;
+
+	return __basepage_index(page);
+}
+
 #else
 struct hstate {};
 #define alloc_huge_page_node(h, nid) NULL
@@ -345,6 +356,11 @@ static inline unsigned int pages_per_hug
 	return 1;
 }
 #define hstate_index_to_shift(index) 0
+
+static inline pgoff_t basepage_index(struct page *page)
+{
+	return page->index;
+}
 #endif
 
 #endif /* _LINUX_HUGETLB_H */
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -60,6 +60,7 @@
 #include <linux/pid.h>
 #include <linux/nsproxy.h>
 #include <linux/ptrace.h>
+#include <linux/hugetlb.h>
 
 #include <asm/futex.h>
 
@@ -363,7 +364,7 @@ again:
 	} else {
 		key->both.offset |= FUT_OFF_INODE; /* inode-based key */
 		key->shared.inode = page_head->mapping->host;
-		key->shared.pgoff = page_head->index;
+		key->shared.pgoff = basepage_index(page);
 	}
 
 	get_futex_key_refs(key);
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -679,6 +679,23 @@ int PageHuge(struct page *page)
 }
 EXPORT_SYMBOL_GPL(PageHuge);
 
+pgoff_t __basepage_index(struct page *page)
+{
+	struct page *page_head = compound_head(page);
+	pgoff_t index = page_index(page_head);
+	unsigned long compound_idx;
+
+	if (!PageHuge(page_head))
+		return page_index(page);
+
+	if (compound_order(page_head) >= MAX_ORDER)
+		compound_idx = page_to_pfn(page) - page_to_pfn(page_head);
+	else
+		compound_idx = page - page_head;
+
+	return (index << compound_order(page_head)) + compound_idx;
+}
+
 static struct page *alloc_fresh_huge_page_node(struct hstate *h, int nid)
 {
 	struct page *page;

[51/85] timer: Fix jiffies wrap behavior of round_jiffies_common()

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Bart Van Assche <bart.vanassche@gmail.com>

commit 9e04d3804d3ac97d8c03a41d78d0f0674b5d01e1 upstream.

Direct compare of jiffies related values does not work in the wrap
around case. Replace it with time_is_after_jiffies().

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Link: http://lkml.kernel.org/r/519BC066.5080600@acm.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 kernel/timer.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

--- a/kernel/timer.c
+++ b/kernel/timer.c
@@ -145,9 +145,11 @@ static unsigned long round_jiffies_commo
 	/* now that we have rounded, subtract the extra skew again */
 	j -= cpu * 3;
 
-	if (j <= jiffies) /* rounding ate our timeout entirely; */
-		return original;
-	return j;
+	/*
+	 * Make sure j is still in the future. Otherwise return the
+	 * unmodified value.
+	 */
+	return time_is_after_jiffies(j) ? j : original;
 }
 
 /**

[07/85] i2c-piix4: Add AMD CZ SMBus device ID

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Shane Huang <shane.huang@amd.com>

commit b996ac90f595dda271cbd858b136b45557fc1a57 upstream.

To add AMD CZ SMBus controller device ID.

[bhelgaas: drop pci_ids.h update]
Signed-off-by: Shane Huang <shane.huang@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 Documentation/i2c/busses/i2c-piix4 | 2 +-
 drivers/i2c/busses/Kconfig         | 1 +
 drivers/i2c/busses/i2c-piix4.c     | 3 ++-
 3 files changed, 4 insertions(+), 2 deletions(-)

--- a/Documentation/i2c/busses/i2c-piix4
+++ b/Documentation/i2c/busses/i2c-piix4
@@ -8,7 +8,7 @@ Supported adapters:
     Datasheet: Only available via NDA from ServerWorks
   * ATI IXP200, IXP300, IXP400, SB600, SB700 and SB800 southbridges
     Datasheet: Not publicly available
-  * AMD Hudson-2
+  * AMD Hudson-2, CZ
     Datasheet: Not publicly available
   * Standard Microsystems (SMSC) SLC90E66 (Victory66) southbridge
     Datasheet: Publicly available at the SMSC website http://www.smsc.com
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -137,6 +137,7 @@ config I2C_PIIX4
 	    ATI SB700
 	    ATI SB800
 	    AMD Hudson-2
+	    AMD CZ
 	    Serverworks OSB4
 	    Serverworks CSB5
 	    Serverworks CSB6
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -22,7 +22,7 @@
 	Intel PIIX4, 440MX
 	Serverworks OSB4, CSB5, CSB6, HT-1000, HT-1100
 	ATI IXP200, IXP300, IXP400, SB600, SB700, SB800
-	AMD Hudson-2
+	AMD Hudson-2, CZ
 	SMSC Victory66
 
    Note: we assume there can only be one device, with one SMBus interface.
@@ -481,6 +481,7 @@ static const struct pci_device_id piix4_
 	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x790b) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS,
 		     PCI_DEVICE_ID_SERVERWORKS_OSB4) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS,

[49/85] genirq: Fix can_request_irq() for IRQs without an action

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Ben Hutchings <ben@decadent.org.uk>

commit 2779db8d37d4b542d9ca2575f5f178dbeaca6c86 upstream.

Commit 02725e7471b8 ('genirq: Use irq_get/put functions'),
inadvertently changed can_request_irq() to return 0 for IRQs that have
no action.  This causes pcibios_lookup_irq() to select only IRQs that
already have an action with IRQF_SHARED set, or to fail if there are
none.  Change can_request_irq() to return 1 for IRQs that have no
action (if the first two conditions are met).

Reported-by: Bjarni Ingi Gislason <bjarniig@rhi.hi.is>
Tested-by: Bjarni Ingi Gislason <bjarniig@rhi.hi.is> (against 3.2)
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: 709647@bugs.debian.org
Link: http://bugs.debian.org/709647
Link: http://lkml.kernel.org/r/1372383630.23847.40.camel@deadeye.wl.decadent.org.uk
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 kernel/irq/manage.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -539,9 +539,9 @@ int can_request_irq(unsigned int irq, un
 		return 0;
 
 	if (irq_settings_can_request(desc)) {
-		if (desc->action)
-			if (irqflags & desc->action->flags & IRQF_SHARED)
-				canrequest =1;
+		if (!desc->action ||
+		    irqflags & desc->action->flags & IRQF_SHARED)
+			canrequest = 1;
 	}
 	irq_put_desc_unlock(desc, flags);
 	return canrequest;

[64/85] libceph: Fix NULL pointer dereference in auth client code

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Tyler Hicks <tyhicks@canonical.com>

commit 2cb33cac622afde897aa02d3dcd9fbba8bae839e upstream.

A malicious monitor can craft an auth reply message that could cause a
NULL function pointer dereference in the client's kernel.

To prevent this, the auth_none protocol handler needs an empty
ceph_auth_client_ops->build_request() function.

CVE-2013-1059

Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Reported-by: Chanam Park <chanam.park@hkpco.kr>
Reviewed-by: Seth Arnold <seth.arnold@canonical.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 net/ceph/auth_none.c | 6 ++++++
 1 file changed, 6 insertions(+)

--- a/net/ceph/auth_none.c
+++ b/net/ceph/auth_none.c
@@ -39,6 +39,11 @@ static int should_authenticate(struct ce
 	return xi->starting;
 }
 
+static int build_request(struct ceph_auth_client *ac, void *buf, void *end)
+{
+	return 0;
+}
+
 /*
  * the generic auth code decode the global_id, and we carry no actual
  * authenticate state, so nothing happens here.
@@ -107,6 +112,7 @@ static const struct ceph_auth_client_ops
 	.destroy = destroy,
 	.is_authenticated = is_authenticated,
 	.should_authenticate = should_authenticate,
+	.build_request = build_request,
 	.handle_reply = handle_reply,
 	.create_authorizer = ceph_auth_none_create_authorizer,
 	.destroy_authorizer = ceph_auth_none_destroy_authorizer,

[34/85] ARM: 7765/1: perf: Record the user-mode PC in the call chain.

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Jed Davis <jld@mozilla.com>

commit c5f927a6f62196226915f12194c9d0df4e2210d7 upstream.

With this change, we no longer lose the innermost entry in the user-mode
part of the call chain.  See also the x86 port, which includes the ip.

It's possible to partially work around this problem by post-processing
the data to use the PERF_SAMPLE_IP value, but this works only if the CPU
wasn't in the kernel when the sample was taken.

Signed-off-by: Jed Davis <jld@mozilla.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 arch/arm/kernel/perf_event.c | 1 +
 1 file changed, 1 insertion(+)

--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -795,6 +795,7 @@ perf_callchain_user(struct perf_callchai
 	struct frame_tail __user *tail;
 
 
+	perf_callchain_store(entry, regs->ARM_pc);
 	tail = (struct frame_tail __user *)regs->ARM_fp - 1;
 
 	while ((entry->nr < PERF_MAX_STACK_DEPTH) &&

[66/85] ocfs2: xattr: fix inlined xattr reflink

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Junxiao Bi <junxiao.bi@oracle.com>

commit ef962df057aaafd714f5c22ba3de1be459571fdf upstream.

Inlined xattr shared free space of inode block with inlined data or data
extent record, so the size of the later two should be adjusted when
inlined xattr is enabled.  See ocfs2_xattr_ibody_init().  But this isn't
done well when reflink.  For inode with inlined data, its max inlined
data size is adjusted in ocfs2_duplicate_inline_data(), no problem.  But
for inode with data extent record, its record count isn't adjusted.  Fix
it, or data extent record and inlined xattr may overwrite each other,
then cause data corruption or xattr failure.

One panic caused by this bug in our test environment is the following:

  kernel BUG at fs/ocfs2/xattr.c:1435!
  invalid opcode: 0000 [#1] SMP
  Pid: 10871, comm: multi_reflink_t Not tainted 2.6.39-300.17.1.el5uek #1
  RIP: ocfs2_xa_offset_pointer+0x17/0x20 [ocfs2]
  RSP: e02b:ffff88007a587948  EFLAGS: 00010283
  RAX: 0000000000000000 RBX: 0000000000000010 RCX: 00000000000051e4
  RDX: ffff880057092060 RSI: 0000000000000f80 RDI: ffff88007a587a68
  RBP: ffff88007a587948 R08: 00000000000062f4 R09: 0000000000000000
  R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000010
  R13: ffff88007a587a68 R14: 0000000000000001 R15: ffff88007a587c68
  FS:  00007fccff7f06e0(0000) GS:ffff88007fc00000(0000) knlGS:0000000000000000
  CS:  e033 DS: 0000 ES: 0000 CR0: 000000008005003b
  CR2: 00000000015cf000 CR3: 000000007aa76000 CR4: 0000000000000660
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
  Process multi_reflink_t
  Call Trace:
    ocfs2_xa_reuse_entry+0x60/0x280 [ocfs2]
    ocfs2_xa_prepare_entry+0x17e/0x2a0 [ocfs2]
    ocfs2_xa_set+0xcc/0x250 [ocfs2]
    ocfs2_xattr_ibody_set+0x98/0x230 [ocfs2]
    __ocfs2_xattr_set_handle+0x4f/0x700 [ocfs2]
    ocfs2_xattr_set+0x6c6/0x890 [ocfs2]
    ocfs2_xattr_user_set+0x46/0x50 [ocfs2]
    generic_setxattr+0x70/0x90
    __vfs_setxattr_noperm+0x80/0x1a0
    vfs_setxattr+0xa9/0xb0
    setxattr+0xc3/0x120
    sys_fsetxattr+0xa8/0xd0
    system_call_fastpath+0x16/0x1b

Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Jie Liu <jeff.liu@oracle.com>
Acked-by: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Sunil Mushran <sunil.mushran@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 fs/ocfs2/xattr.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

--- a/fs/ocfs2/xattr.c
+++ b/fs/ocfs2/xattr.c
@@ -6499,6 +6499,16 @@ static int ocfs2_reflink_xattr_inline(st
 	}
 
 	new_oi = OCFS2_I(args->new_inode);
+	/*
+	 * Adjust extent record count to reserve space for extended attribute.
+	 * Inline data count had been adjusted in ocfs2_duplicate_inline_data().
+	 */
+	if (!(new_oi->ip_dyn_features & OCFS2_INLINE_DATA_FL) &&
+	    !(ocfs2_inode_is_fast_symlink(args->new_inode))) {
+		struct ocfs2_extent_list *el = &new_di->id2.i_list;
+		le16_add_cpu(&el->l_count, -(inline_size /
+					sizeof(struct ocfs2_extent_rec)));
+	}
 	spin_lock(&new_oi->ip_lock);
 	new_oi->ip_dyn_features |= OCFS2_HAS_XATTR_FL | OCFS2_INLINE_XATTR_FL;
 	new_di->i_dyn_features = cpu_to_le16(new_oi->ip_dyn_features);

[56/85] powerpc/smp: Section mismatch from smp_release_cpus to __initdata spinning_secondaries

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Chen Gang <gang.chen@asianux.com>

commit 8246aca7058f3f2c2ae503081777965cd8df7b90 upstream.

the smp_release_cpus is a normal funciton and called in normal environments,
  but it calls the __initdata spinning_secondaries.
  need modify spinning_secondaries to match smp_release_cpus.

the related warning:
  (the linker report boot_paca.33377, but it should be spinning_secondaries)

-----------------------------------------------------------------------------

WARNING: arch/powerpc/kernel/built-in.o(.text+0x23176): Section mismatch in reference from the function .smp_release_cpus() to the variable .init.data:boot_paca.33377
The function .smp_release_cpus() references
the variable __initdata boot_paca.33377.
This is often because .smp_release_cpus lacks a __initdata
annotation or the annotation of boot_paca.33377 is wrong.

WARNING: arch/powerpc/kernel/built-in.o(.text+0x231fe): Section mismatch in reference from the function .smp_release_cpus() to the variable .init.data:boot_paca.33377
The function .smp_release_cpus() references
the variable __initdata boot_paca.33377.
This is often because .smp_release_cpus lacks a __initdata
annotation or the annotation of boot_paca.33377 is wrong.

-----------------------------------------------------------------------------

Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 arch/powerpc/kernel/setup_64.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -74,7 +74,7 @@
 #endif
 
 int boot_cpuid = 0;
-int __initdata spinning_secondaries;
+int spinning_secondaries;
 u64 ppc64_pft_size;
 
 /* Pick defaults since we might want to patch instructions

[52/85] xen/time: remove blocked time accounting from xen "clockchip"

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Laszlo Ersek <lersek@redhat.com>

commit 0b0c002c340e78173789f8afaa508070d838cf3d upstream.

... because the "clock_event_device framework" already accounts for idle
time through the "event_handler" function pointer in
xen_timer_interrupt().

The patch is intended as the completion of [1]. It should fix the double
idle times seen in PV guests' /proc/stat [2]. It should be orthogonal to
stolen time accounting (the removed code seems to be isolated).

The approach may be completely misguided.

[1] https://lkml.org/lkml/2011/10/6/10
[2] http://lists.xensource.com/archives/html/xen-devel/2010-08/msg01068.html

John took the time to retest this patch on top of v3.10 and reported:
"idle time is correctly incremented for pv and hvm for the normal
case, nohz=off and nohz=idle." so lets put this patch in.

Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: John Haxby <john.haxby@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 arch/x86/xen/time.c | 17 ++---------------
 1 file changed, 2 insertions(+), 15 deletions(-)

--- a/arch/x86/xen/time.c
+++ b/arch/x86/xen/time.c
@@ -36,9 +36,8 @@ static DEFINE_PER_CPU(struct vcpu_runsta
 /* snapshots of runstate info */
 static DEFINE_PER_CPU(struct vcpu_runstate_info, xen_runstate_snapshot);
 
-/* unused ns of stolen and blocked time */
+/* unused ns of stolen time */
 static DEFINE_PER_CPU(u64, xen_residual_stolen);
-static DEFINE_PER_CPU(u64, xen_residual_blocked);
 
 /* return an consistent snapshot of 64-bit time/counter value */
 static u64 get64(const u64 *p)
@@ -115,7 +114,7 @@ static void do_stolen_accounting(void)
 {
 	struct vcpu_runstate_info state;
 	struct vcpu_runstate_info *snap;
-	s64 blocked, runnable, offline, stolen;
+	s64 runnable, offline, stolen;
 	cputime_t ticks;
 
 	get_runstate_snapshot(&state);
@@ -125,7 +124,6 @@ static void do_stolen_accounting(void)
 	snap = &__get_cpu_var(xen_runstate_snapshot);
 
 	/* work out how much time the VCPU has not been runn*ing*  */
-	blocked = state.time[RUNSTATE_blocked] - snap->time[RUNSTATE_blocked];
 	runnable = state.time[RUNSTATE_runnable] - snap->time[RUNSTATE_runnable];
 	offline = state.time[RUNSTATE_offline] - snap->time[RUNSTATE_offline];
 
@@ -141,17 +139,6 @@ static void do_stolen_accounting(void)
 	ticks = iter_div_u64_rem(stolen, NS_PER_TICK, &stolen);
 	__this_cpu_write(xen_residual_stolen, stolen);
 	account_steal_ticks(ticks);
-
-	/* Add the appropriate number of ticks of blocked time,
-	   including any left-overs from last time. */
-	blocked += __this_cpu_read(xen_residual_blocked);
-
-	if (blocked < 0)
-		blocked = 0;
-
-	ticks = iter_div_u64_rem(blocked, NS_PER_TICK, &blocked);
-	__this_cpu_write(xen_residual_blocked, blocked);
-	account_idle_ticks(ticks);
 }
 
 /* Get the TSC speed from Xen */

[17/85] ath9k_hw: Assign default xlna config for AR9485

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Sujith Manoharan <c_manoha@qca.qualcomm.com>

commit 30d5b709da23f4ab9836c7f66d2d2e780a69cf12 upstream.

For AR9485 boards with XLNA, the default gpio config
is not set correctly, fix this.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 8 ++++++--
 drivers/net/wireless/ath/ath9k/ar9003_phy.h    | 2 ++
 2 files changed, 8 insertions(+), 2 deletions(-)

--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -3625,7 +3625,7 @@ static u16 ar9003_hw_ant_ctrl_chain_get(
 static void ar9003_hw_ant_ctrl_apply(struct ath_hw *ah, bool is2ghz)
 {
 	int chain;
-	u32 regval;
+	u32 regval, value;
 	u32 ant_div_ctl1;
 	static const u32 switch_chain_reg[AR9300_MAX_CHAINS] = {
 			AR_PHY_SWITCH_CHAIN_0,
@@ -3633,7 +3633,11 @@ static void ar9003_hw_ant_ctrl_apply(str
 			AR_PHY_SWITCH_CHAIN_2,
 	};
 
-	u32 value = ar9003_hw_ant_ctrl_common_get(ah, is2ghz);
+	if (AR_SREV_9485(ah) && (ar9003_hw_get_rx_gain_idx(ah) == 0))
+		ath9k_hw_cfg_output(ah, AR9300_EXT_LNA_CTL_GPIO_AR9485,
+				    AR_GPIO_OUTPUT_MUX_AS_PCIE_ATTENTION_LED);
+
+	value = ar9003_hw_ant_ctrl_common_get(ah, is2ghz);
 
 	if (AR_SREV_9462(ah)) {
 		if (AR_SREV_9462_10(ah)) {
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.h
@@ -334,6 +334,8 @@
 
 #define AR_PHY_CCA_NOM_VAL_9330_2GHZ          -118
 
+#define AR9300_EXT_LNA_CTL_GPIO_AR9485 9
+
 /*
  * AGC Field Definitions
  */

[55/85] Revert "serial: 8250_pci: add support for another kind of NetMos Technology PCI 9835 Multi-I/O Controller"

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 828c6a102b1f2b8583fadc0e779c46b31d448f0b upstream.

This reverts commit 8d2f8cd424ca0b99001f3ff4f5db87c4e525f366.

As reported by Stefan, this device already works with the parport_serial
driver, so the 8250_pci driver should not also try to grab it as well.

Reported-by: Stefan Seyfried <stefan.seyfried@googlemail.com>
Cc: Wang YanQing <udknight@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/tty/serial/8250_pci.c | 4 ----
 1 file changed, 4 deletions(-)

--- a/drivers/tty/serial/8250_pci.c
+++ b/drivers/tty/serial/8250_pci.c
@@ -4083,10 +4083,6 @@ static struct pci_device_id serial_pci_t
 		PCI_VENDOR_ID_IBM, 0x0299,
 		0, 0, pbn_b0_bt_2_115200 },
 
-	{	PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9835,
-		0x1000, 0x0012,
-		0, 0, pbn_b0_bt_2_115200 },
-
 	{	PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9901,
 		0xA000, 0x1000,
 		0, 0, pbn_b0_1_115200 },

[40/85] net/tg3: Avoid delay during MMIO access

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Gavin Shan <shangw@linux.vnet.ibm.com>

commit 6d446ec32f169c6a5d9bc90684a8082a6cbe90f6 upstream.

When the EEH error is the result of a fenced host bridge, MMIO accesses
can be very slow (milliseconds) to timeout and return all 1's,
thus causing the driver various timeout loops to take way too long and
trigger soft-lockup warnings (in addition to taking minutes to recover).

It might be worthwhile to check if for any of these cases, ffffffff is
a valid possible value, and if not, bail early since that means the HW
is either gone or isolated. In the meantime, checking that the PCI channel
is offline would be workaround of the problem.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 3.2: adjust context, indentation]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/net/ethernet/broadcom/tg3.c | 36 ++++++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -688,6 +688,9 @@ static int tg3_ape_lock(struct tg3 *tp,
 		status = tg3_ape_read32(tp, gnt + off);
 		if (status == bit)
 			break;
+		if (pci_channel_offline(tp->pdev))
+			break;
+
 		udelay(10);
 	}
 
@@ -1465,6 +1468,9 @@ static void tg3_wait_for_event_ack(struc
 	for (i = 0; i < delay_cnt; i++) {
 		if (!(tr32(GRC_RX_CPU_EVENT) & GRC_RX_CPU_DRIVER_EVENT))
 			break;
+		if (pci_channel_offline(tp->pdev))
+			break;
+
 		udelay(8);
 	}
 }
@@ -1628,6 +1634,9 @@ static int tg3_poll_fw(struct tg3 *tp)
 		for (i = 0; i < 200; i++) {
 			if (tr32(VCPU_STATUS) & VCPU_STATUS_INIT_DONE)
 				return 0;
+			if (pci_channel_offline(tp->pdev))
+				return -ENODEV;
+
 			udelay(100);
 		}
 		return -ENODEV;
@@ -1638,6 +1647,15 @@ static int tg3_poll_fw(struct tg3 *tp)
 		tg3_read_mem(tp, NIC_SRAM_FIRMWARE_MBOX, &val);
 		if (val == ~NIC_SRAM_FIRMWARE_MBOX_MAGIC1)
 			break;
+		if (pci_channel_offline(tp->pdev)) {
+			if (!tg3_flag(tp, NO_FWARE_REPORTED)) {
+				tg3_flag_set(tp, NO_FWARE_REPORTED);
+				netdev_info(tp->dev, "No firmware running\n");
+			}
+
+			break;
+		}
+
 		udelay(10);
 	}
 
@@ -3067,6 +3085,10 @@ static int tg3_halt_cpu(struct tg3 *tp,
 			tw32(offset + CPU_MODE,  CPU_MODE_HALT);
 			if (tr32(offset + CPU_MODE) & CPU_MODE_HALT)
 				break;
+			if (pci_channel_offline(tp->pdev))
+				return -EBUSY;
+			if (pci_channel_offline(tp->pdev))
+				return -EBUSY;
 		}
 
 		tw32(offset + CPU_STATE, 0xffffffff);
@@ -7569,6 +7591,14 @@ static int tg3_stop_block(struct tg3 *tp
 	tw32_f(ofs, val);
 
 	for (i = 0; i < MAX_WAIT_CNT; i++) {
+		if (pci_channel_offline(tp->pdev)) {
+			dev_err(&tp->pdev->dev,
+				"tg3_stop_block device offline, "
+				"ofs=%lx enable_bit=%x\n",
+				ofs, enable_bit);
+			return -ENODEV;
+		}
+
 		udelay(100);
 		val = tr32(ofs);
 		if ((val & enable_bit) == 0)
@@ -7592,6 +7622,13 @@ static int tg3_abort_hw(struct tg3 *tp,
 
 	tg3_disable_ints(tp);
 
+	if (pci_channel_offline(tp->pdev)) {
+		tp->rx_mode &= ~(RX_MODE_ENABLE | TX_MODE_ENABLE);
+		tp->mac_mode &= ~MAC_MODE_TDE_ENABLE;
+		err = -ENODEV;
+		goto err_no_dev;
+	}
+
 	tp->rx_mode &= ~RX_MODE_ENABLE;
 	tw32_f(MAC_RX_MODE, tp->rx_mode);
 	udelay(10);
@@ -7640,6 +7677,7 @@ static int tg3_abort_hw(struct tg3 *tp,
 	err |= tg3_stop_block(tp, BUFMGR_MODE, BUFMGR_MODE_ENABLE, silent);
 	err |= tg3_stop_block(tp, MEMARB_MODE, MEMARB_MODE_ENABLE, silent);
 
+err_no_dev:
 	for (i = 0; i < tp->irq_cnt; i++) {
 		struct tg3_napi *tnapi = &tp->napi[i];
 		if (tnapi->hw_status)

[70/85] nbd: correct disconnect behavior

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Paul Clements <paul.clements@steeleye.com>

commit c378f70adbc1bbecd9e6db145019f14b2f688c7c upstream.

Currently, when a disconnect is requested by the user (via NBD_DISCONNECT
ioctl) the return from NBD_DO_IT is undefined (it is usually one of
several error codes).  This means that nbd-client does not know if a
manual disconnect was performed or whether a network error occurred.
Because of this, nbd-client's persist mode (which tries to reconnect after
error, but not after manual disconnect) does not always work correctly.

This change fixes this by causing NBD_DO_IT to always return 0 if a user
requests a disconnect.  This means that nbd-client can correctly either
persist the connection (if an error occurred) or disconnect (if the user
requested it).

Signed-off-by: Paul Clements <paul.clements@steeleye.com>
Acked-by: Rob Landley <rob@landley.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[bwh: Backported to 3.2: adjust device pointer name]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/block/nbd.c | 7 ++++++-
 include/linux/nbd.h | 1 +
 2 files changed, 7 insertions(+), 1 deletion(-)

--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -598,8 +598,10 @@ static int __nbd_ioctl(struct block_devi
 		if (!lo->sock)
 			return -EINVAL;
 
+		lo->disconnect = 1;
+
 		nbd_send_req(lo, &sreq);
-                return 0;
+		return 0;
 	}
  
 	case NBD_CLEAR_SOCK: {
@@ -629,6 +631,7 @@ static int __nbd_ioctl(struct block_devi
 				lo->sock = SOCKET_I(inode);
 				if (max_part > 0)
 					bdev->bd_invalidated = 1;
+				lo->disconnect = 0; /* we're connected now */
 				return 0;
 			} else {
 				fput(file);
@@ -701,6 +704,8 @@ static int __nbd_ioctl(struct block_devi
 		set_capacity(lo->disk, 0);
 		if (max_part > 0)
 			ioctl_by_bdev(bdev, BLKRRPART, 0);
+		if (lo->disconnect) /* user requested, ignore socket errors */
+			return 0;
 		return lo->harderror;
 	}
 
--- a/include/linux/nbd.h
+++ b/include/linux/nbd.h
@@ -68,6 +68,7 @@ struct nbd_device {
 	u64 bytesize;
 	pid_t pid; /* pid of nbd-client, if attached */
 	int xmit_timeout;
+	int disconnect; /* a disconnect has been requested by user */
 };
 
 #endif

[54/85] UBIFS: fix a horrid bug

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>

commit 605c912bb843c024b1ed173dc427cd5c08e5d54d upstream.

Al Viro pointed me to the fact that '->readdir()' and '->llseek()' have no
mutual exclusion, which means the 'ubifs_dir_llseek()' can be run while we are
in the middle of 'ubifs_readdir()'.

This means that 'file->private_data' can be freed while 'ubifs_readdir()' uses
it, and this is a very bad bug: not only 'ubifs_readdir()' can return garbage,
but this may corrupt memory and lead to all kinds of problems like crashes an
security holes.

This patch fixes the problem by using the 'file->f_version' field, which
'->llseek()' always unconditionally sets to zero. We set it to 1 in
'ubifs_readdir()' and whenever we detect that it became 0, we know there was a
seek and it is time to clear the state saved in 'file->private_data'.

I tested this patch by writing a user-space program which runds readdir and
seek in parallell. I could easily crash the kernel without these patches, but
could not crash it with these patches.

Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 fs/ubifs/dir.c | 30 +++++++++++++++++++++++++++---
 1 file changed, 27 insertions(+), 3 deletions(-)

--- a/fs/ubifs/dir.c
+++ b/fs/ubifs/dir.c
@@ -373,6 +373,24 @@ static int ubifs_readdir(struct file *fi
 		 */
 		return 0;
 
+	if (file->f_version == 0) {
+		/*
+		 * The file was seek'ed, which means that @file->private_data
+		 * is now invalid. This may also be just the first
+		 * 'ubifs_readdir()' invocation, in which case
+		 * @file->private_data is NULL, and the below code is
+		 * basically a no-op.
+		 */
+		kfree(file->private_data);
+		file->private_data = NULL;
+	}
+
+	/*
+	 * 'generic_file_llseek()' unconditionally sets @file->f_version to
+	 * zero, and we use this for detecting whether the file was seek'ed.
+	 */
+	file->f_version = 1;
+
 	/* File positions 0 and 1 correspond to "." and ".." */
 	if (pos == 0) {
 		ubifs_assert(!file->private_data);
@@ -446,6 +464,14 @@ static int ubifs_readdir(struct file *fi
 		file->f_pos = pos = key_hash_flash(c, &dent->key);
 		file->private_data = dent;
 		cond_resched();
+
+		if (file->f_version == 0)
+			/*
+			 * The file was seek'ed meanwhile, lets return and start
+			 * reading direntries from the new position on the next
+			 * invocation.
+			 */
+			return 0;
 	}
 
 out:
@@ -456,15 +482,13 @@ out:
 
 	kfree(file->private_data);
 	file->private_data = NULL;
+	/* 2 is a special value indicating that there are no more direntries */
 	file->f_pos = 2;
 	return 0;
 }
 
-/* If a directory is seeked, we have to free saved readdir() state */
 static loff_t ubifs_dir_llseek(struct file *file, loff_t offset, int origin)
 {
-	kfree(file->private_data);
-	file->private_data = NULL;
 	return generic_file_llseek(file, offset, origin);
 }
 

[43/85] [SCSI] sd: fix array cache flushing bug causing performance problems

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: James Bottomley <JBottomley@Parallels.com>

commit 39c60a0948cc06139e2fbfe084f83cb7e7deae3b upstream.

Some arrays synchronize their full non volatile cache when the sd driver sends
a SYNCHRONIZE CACHE command.  Unfortunately, they can have Terrabytes of this
and we send a SYNCHRONIZE CACHE for every barrier if an array reports it has a
writeback cache.  This leads to massive slowdowns on journalled filesystems.

The fix is to allow userspace to turn off the writeback cache setting as a
temporary measure (i.e. without doing the MODE SELECT to write it back to the
device), so even though the device reported it has a writeback cache, the
user, knowing that the cache is non volatile and all they care about is
filesystem correctness, can turn that bit off in the kernel and avoid the
performance ruinous (and safety irrelevant) SYNCHRONIZE CACHE commands.

The way you do this is add a 'temporary' prefix when performing the usual
cache setting operations, so

echo temporary write through > /sys/class/scsi_disk/<disk>/cache_type

Reported-by: Ric Wheeler <rwheeler@redhat.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/scsi/sd.c | 20 ++++++++++++++++++++
 drivers/scsi/sd.h |  1 +
 2 files changed, 21 insertions(+)

--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -138,6 +138,7 @@ sd_store_cache_type(struct device *dev,
 	char *buffer_data;
 	struct scsi_mode_data data;
 	struct scsi_sense_hdr sshdr;
+	const char *temp = "temporary ";
 	int len;
 
 	if (sdp->type != TYPE_DISK)
@@ -146,6 +147,13 @@ sd_store_cache_type(struct device *dev,
 		 * it's not worth the risk */
 		return -EINVAL;
 
+	if (strncmp(buf, temp, sizeof(temp) - 1) == 0) {
+		buf += sizeof(temp) - 1;
+		sdkp->cache_override = 1;
+	} else {
+		sdkp->cache_override = 0;
+	}
+
 	for (i = 0; i < ARRAY_SIZE(sd_cache_types); i++) {
 		len = strlen(sd_cache_types[i]);
 		if (strncmp(sd_cache_types[i], buf, len) == 0 &&
@@ -158,6 +166,13 @@ sd_store_cache_type(struct device *dev,
 		return -EINVAL;
 	rcd = ct & 0x01 ? 1 : 0;
 	wce = ct & 0x02 ? 1 : 0;
+
+	if (sdkp->cache_override) {
+		sdkp->WCE = wce;
+		sdkp->RCD = rcd;
+		return count;
+	}
+
 	if (scsi_mode_sense(sdp, 0x08, 8, buffer, sizeof(buffer), SD_TIMEOUT,
 			    SD_MAX_RETRIES, &data, NULL))
 		return -EINVAL;
@@ -2037,6 +2052,10 @@ sd_read_cache_type(struct scsi_disk *sdk
 	int old_rcd = sdkp->RCD;
 	int old_dpofua = sdkp->DPOFUA;
 
+
+	if (sdkp->cache_override)
+		return;
+
 	first_len = 4;
 	if (sdp->skip_ms_page_8) {
 		if (sdp->type == TYPE_RBC)
@@ -2518,6 +2537,7 @@ static void sd_probe_async(void *data, a
 	sdkp->capacity = 0;
 	sdkp->media_present = 1;
 	sdkp->write_prot = 0;
+	sdkp->cache_override = 0;
 	sdkp->WCE = 0;
 	sdkp->RCD = 0;
 	sdkp->ATO = 0;
--- a/drivers/scsi/sd.h
+++ b/drivers/scsi/sd.h
@@ -64,6 +64,7 @@ struct scsi_disk {
 	u8		protection_type;/* Data Integrity Field */
 	u8		provisioning_mode;
 	unsigned	ATO : 1;	/* state of disk ATO bit */
+	unsigned	cache_override : 1; /* temp override of WCE,RCD */
 	unsigned	WCE : 1;	/* state of disk WCE bit */
 	unsigned	RCD : 1;	/* state of disk RCD bit, unused */
 	unsigned	DPOFUA : 1;	/* state of disk DPOFUA bit */

[05/85] [SCSI] zfcp: status read buffers on first adapter open with link down

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Steffen Maier <maier@linux.vnet.ibm.com>

commit 9edf7d75ee5f21663a0183d21f702682d0ef132f upstream.

Commit 64deb6efdc5504ce97b5c1c6f281fffbc150bd93
"[SCSI] zfcp: Use status_read_buf_num provided by FCP channel"
started using a value returned by the channel but only evaluated the value
if the fabric link is up.
Commit 8d88cf3f3b9af4713642caeb221b6d6a42019001
"[SCSI] zfcp: Update status read mempool"
introduced mempool resizings based on the above value.
On setting an FCP device online for the very first time since boot, a new
zeroed adapter object is allocated. If the link is down, the number of
status read requests remains zero. Since just the config data exchange is
incomplete, we proceed with adapter open recovery. However, we
unconditionally call mempool_resize with adapter->stat_read_buf_num == 0 in
this case.

This causes a kernel message "kernel BUG at mm/mempool.c:131!" in process
"zfcperp<FCP-device-bus-ID>" with last function mempool_resize in Krnl PSW
and zfcp_erp_thread in the Call Trace.

Don't evaluate channel values which are invalid on link down. The number of
status read requests is always valid, evaluated, and set to a positive
minimum greater than zero. The adapter open recovery can proceed and the
channel has status read buffers to inform us on a future link up event.
While we are not aware of any other code path that could result in mempool
resize attempts of size zero, we still also initialize the number of status
read buffers to be posted to a static minimum number on adapter object
allocation.

Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
[bwh: Backported to 3.2:
 - Copyright notice changed slightly
 - Don't use zfcp_fsf_convert_portspeed()]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/s390/scsi/zfcp_aux.c |  5 ++++-
 drivers/s390/scsi/zfcp_fsf.c | 23 ++++++++++++++++-------
 2 files changed, 20 insertions(+), 8 deletions(-)

--- a/drivers/s390/scsi/zfcp_aux.c
+++ b/drivers/s390/scsi/zfcp_aux.c
@@ -3,7 +3,7 @@
  *
  * Module interface and handling of zfcp data structures.
  *
- * Copyright IBM Corporation 2002, 2010
+ * Copyright IBM Corp. 2002, 2013
  */
 
 /*
@@ -23,6 +23,7 @@
  *            Christof Schmitt
  *            Martin Petermann
  *            Sven Schuetz
+ *            Steffen Maier
  */
 
 #define KMSG_COMPONENT "zfcp"
@@ -415,6 +416,8 @@ struct zfcp_adapter *zfcp_adapter_enqueu
 	adapter->dma_parms.max_segment_size = ZFCP_QDIO_SBALE_LEN;
 	adapter->ccw_device->dev.dma_parms = &adapter->dma_parms;
 
+	adapter->stat_read_buf_num = FSF_STATUS_READS_RECOM;
+
 	if (!zfcp_scsi_adapter_register(adapter))
 		return adapter;
 
--- a/drivers/s390/scsi/zfcp_fsf.c
+++ b/drivers/s390/scsi/zfcp_fsf.c
@@ -3,7 +3,7 @@
  *
  * Implementation of FSF commands.
  *
- * Copyright IBM Corporation 2002, 2010
+ * Copyright IBM Corp. 2002, 2013
  */
 
 #define KMSG_COMPONENT "zfcp"
@@ -455,11 +455,8 @@ static int zfcp_fsf_exchange_config_eval
 
 	fc_host_port_name(shost) = nsp->fl_wwpn;
 	fc_host_node_name(shost) = nsp->fl_wwnn;
-	fc_host_port_id(shost) = ntoh24(bottom->s_id);
-	fc_host_speed(shost) = bottom->fc_link_speed;
 	fc_host_supported_classes(shost) = FC_COS_CLASS2 | FC_COS_CLASS3;
 
-	adapter->hydra_version = bottom->adapter_type;
 	adapter->timer_ticks = bottom->timer_interval & ZFCP_FSF_TIMER_INT_MASK;
 	adapter->stat_read_buf_num = max(bottom->status_read_buf_num,
 					 (u16)FSF_STATUS_READS_RECOM);
@@ -467,6 +464,18 @@ static int zfcp_fsf_exchange_config_eval
 	if (fc_host_permanent_port_name(shost) == -1)
 		fc_host_permanent_port_name(shost) = fc_host_port_name(shost);
 
+	zfcp_scsi_set_prot(adapter);
+
+	/* no error return above here, otherwise must fix call chains */
+	/* do not evaluate invalid fields */
+	if (req->qtcb->header.fsf_status == FSF_EXCHANGE_CONFIG_DATA_INCOMPLETE)
+		return 0;
+
+	fc_host_port_id(shost) = ntoh24(bottom->s_id);
+	fc_host_speed(shost) = bottom->fc_link_speed;
+
+	adapter->hydra_version = bottom->adapter_type;
+
 	switch (bottom->fc_topology) {
 	case FSF_TOPO_P2P:
 		adapter->peer_d_id = ntoh24(bottom->peer_d_id);
@@ -488,8 +497,6 @@ static int zfcp_fsf_exchange_config_eval
 		return -EIO;
 	}
 
-	zfcp_scsi_set_prot(adapter);
-
 	return 0;
 }
 
@@ -540,6 +547,8 @@ static void zfcp_fsf_exchange_config_dat
 				&adapter->status);
 		zfcp_fsf_link_down_info_eval(req,
 			&qtcb->header.fsf_status_qual.link_down_info);
+		if (zfcp_fsf_exchange_config_evaluate(req))
+			return;
 		break;
 	default:
 		zfcp_erp_adapter_shutdown(adapter, 0, "fsecdh3");

[23/85] rtlwifi: rtl8192cu: Add new USB ID for TP-Link TL-WN8200ND

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Larry Finger <Larry.Finger@lwfinger.net>

commit c4d827c5ccc3a49227dbf9d4b248a2e86f388023 upstream.

This is a new device for this driver.

Reported-by: Tobias Kluge <zielscheibe@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Tobias Kluge <zielscheibe@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/net/wireless/rtlwifi/rtl8192cu/sw.c | 1 +
 1 file changed, 1 insertion(+)

--- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
@@ -367,6 +367,7 @@ static struct usb_device_id rtl8192c_usb
 	{RTL_USB_DEVICE(0x2001, 0x330a, rtl92cu_hal_cfg)}, /*D-Link-Alpha*/
 	{RTL_USB_DEVICE(0x2019, 0xab2b, rtl92cu_hal_cfg)}, /*Planex -Abocom*/
 	{RTL_USB_DEVICE(0x20f4, 0x624d, rtl92cu_hal_cfg)}, /*TRENDNet*/
+	{RTL_USB_DEVICE(0x2357, 0x0100, rtl92cu_hal_cfg)}, /*TP-Link WN8200ND*/
 	{RTL_USB_DEVICE(0x7392, 0x7822, rtl92cu_hal_cfg)}, /*Edimax -Edimax*/
 	{}
 };

[41/85] vgacon.c: add cond reschedule points in vgacon_do_font_op

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Marcelo Tosatti <mtosatti@redhat.com>

commit 7e6d72c15ff4cc0c27573901bb05f9eddbd71ed4 upstream.

Booting a 64-vcpu KVM guest, with CONFIG_PREEMPT_VOLUNTARY,
can result in a soft lockup:

BUG: soft lockup - CPU#41 stuck for 67s! [setfont:1505]
 RIP: 0010:[<ffffffff812c48da>]
[<ffffffff812c48da>] vgacon_do_font_op.clone.0+0x1ba/0x550

This is due to the 8192 (cmapsz) IO operations taking longer than expected
due to lock contention in QEMU.

Add conditional resched points in between writes allowing other tasks to
execute.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
[bwh: Backported to 3.2: add #include <linux/sched.h>, already present
 upstream]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/video/console/vgacon.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

--- a/drivers/video/console/vgacon.c
+++ b/drivers/video/console/vgacon.c
@@ -42,6 +42,7 @@
 #include <linux/kd.h>
 #include <linux/slab.h>
 #include <linux/vt_kern.h>
+#include <linux/sched.h>
 #include <linux/selection.h>
 #include <linux/spinlock.h>
 #include <linux/ioport.h>
@@ -1124,11 +1125,15 @@ static int vgacon_do_font_op(struct vgas
 
 	if (arg) {
 		if (set)
-			for (i = 0; i < cmapsz; i++)
+			for (i = 0; i < cmapsz; i++) {
 				vga_writeb(arg[i], charmap + i);
+				cond_resched();
+			}
 		else
-			for (i = 0; i < cmapsz; i++)
+			for (i = 0; i < cmapsz; i++) {
 				arg[i] = vga_readb(charmap + i);
+				cond_resched();
+			}
 
 		/*
 		 * In 512-character mode, the character map is not contiguous if
@@ -1139,11 +1144,15 @@ static int vgacon_do_font_op(struct vgas
 			charmap += 2 * cmapsz;
 			arg += cmapsz;
 			if (set)
-				for (i = 0; i < cmapsz; i++)
+				for (i = 0; i < cmapsz; i++) {
 					vga_writeb(arg[i], charmap + i);
+					cond_resched();
+				}
 			else
-				for (i = 0; i < cmapsz; i++)
+				for (i = 0; i < cmapsz; i++) {
 					arg[i] = vga_readb(charmap + i);
+					cond_resched();
+				}
 		}
 	}
 

[57/85] ext3,ext4: don't mess with dir_file->f_pos in htree_dirblock_to_tree()

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Al Viro <viro@ZenIV.linux.org.uk>

commit 64cb927371cd2ec43758d8a094a003d27bc3d0dc upstream.

Both ext3 and ext4 htree_dirblock_to_tree() is just filling the
in-core rbtree for use by call_filldir().  All updates of ->f_pos are
done by the latter; bumping it here (on error) is obviously wrong - we
might very well have it nowhere near the block we'd found an error in.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 fs/ext3/namei.c | 7 ++-----
 fs/ext4/namei.c | 7 ++-----
 2 files changed, 4 insertions(+), 10 deletions(-)

--- a/fs/ext3/namei.c
+++ b/fs/ext3/namei.c
@@ -585,11 +585,8 @@ static int htree_dirblock_to_tree(struct
 		if (!ext3_check_dir_entry("htree_dirblock_to_tree", dir, de, bh,
 					(block<<EXT3_BLOCK_SIZE_BITS(dir->i_sb))
 						+((char *)de - bh->b_data))) {
-			/* On error, skip the f_pos to the next block. */
-			dir_file->f_pos = (dir_file->f_pos |
-					(dir->i_sb->s_blocksize - 1)) + 1;
-			brelse (bh);
-			return count;
+			/* silently ignore the rest of the block */
+			break;
 		}
 		ext3fs_dirhash(de->name, de->name_len, hinfo);
 		if ((hinfo->hash < start_hash) ||
--- a/fs/ext4/namei.c
+++ b/fs/ext4/namei.c
@@ -585,11 +585,8 @@ static int htree_dirblock_to_tree(struct
 		if (ext4_check_dir_entry(dir, NULL, de, bh,
 				(block<<EXT4_BLOCK_SIZE_BITS(dir->i_sb))
 					 + ((char *)de - bh->b_data))) {
-			/* On error, skip the f_pos to the next block. */
-			dir_file->f_pos = (dir_file->f_pos |
-					(dir->i_sb->s_blocksize - 1)) + 1;
-			brelse(bh);
-			return count;
+			/* silently ignore the rest of the block */
+			break;
 		}
 		ext4fs_dirhash(de->name, de->name_len, hinfo);
 		if ((hinfo->hash < start_hash) ||

[48/85] dlci: validate the net device in dlci_del()

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Zefan Li <lizefan@huawei.com>

commit 578a1310f2592ba90c5674bca21c1dbd1adf3f0a upstream.

We triggered an oops while running trinity with 3.4 kernel:

BUG: unable to handle kernel paging request at 0000000100000d07
IP: [<ffffffffa0109738>] dlci_ioctl+0xd8/0x2d4 [dlci]
PGD 640c0d067 PUD 0
Oops: 0000 [#1] PREEMPT SMP
CPU 3
...
Pid: 7302, comm: trinity-child3 Not tainted 3.4.24.09+ 40 Huawei Technologies Co., Ltd. Tecal RH2285          /BC11BTSA
RIP: 0010:[<ffffffffa0109738>]  [<ffffffffa0109738>] dlci_ioctl+0xd8/0x2d4 [dlci]
...
Call Trace:
  [<ffffffff8137c5c3>] sock_ioctl+0x153/0x280
  [<ffffffff81195494>] do_vfs_ioctl+0xa4/0x5e0
  [<ffffffff8118354a>] ? fget_light+0x3ea/0x490
  [<ffffffff81195a1f>] sys_ioctl+0x4f/0x80
  [<ffffffff81478b69>] system_call_fastpath+0x16/0x1b
...

It's because the net device is not a dlci device.

Reported-by: Li Jinyue <lijinyue@huawei.com>
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/net/wan/dlci.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

--- a/drivers/net/wan/dlci.c
+++ b/drivers/net/wan/dlci.c
@@ -385,6 +385,7 @@ static int dlci_del(struct dlci_add *dlc
 	struct frad_local	*flp;
 	struct net_device	*master, *slave;
 	int			err;
+	bool			found = false;
 
 	rtnl_lock();
 
@@ -394,6 +395,17 @@ static int dlci_del(struct dlci_add *dlc
 		err = -ENODEV;
 		goto out;
 	}
+
+	list_for_each_entry(dlp, &dlci_devs, list) {
+		if (dlp->master == master) {
+			found = true;
+			break;
+		}
+	}
+	if (!found) {
+		err = -ENODEV;
+		goto out;
+	}
 
 	if (netif_running(master)) {
 		err = -EBUSY;

[13/85] ahci: remove pmp link online check in FBS EH

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Shane Huang <shane.huang@amd.com>

commit 912b9ac683b112615d5605686f1dc086402ce9f7 upstream.

ata_link_online() check in ahci_error_intr() is unnecessary, it should
be removed otherwise may lead to lockup with FBS enabled PMP.
http://marc.info/?l=linux-ide&m=137050421603272&w=2

Reported-by: Yu Liu <liuyu.ac@gmail.com>
Signed-off-by: Shane Huang <shane.huang@amd.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/ata/libahci.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -1541,8 +1541,7 @@ static void ahci_error_intr(struct ata_p
 		u32 fbs = readl(port_mmio + PORT_FBS);
 		int pmp = fbs >> PORT_FBS_DWE_OFFSET;
 
-		if ((fbs & PORT_FBS_SDE) && (pmp < ap->nr_pmp_links) &&
-		    ata_link_online(&ap->pmp_link[pmp])) {
+		if ((fbs & PORT_FBS_SDE) && (pmp < ap->nr_pmp_links)) {
 			link = &ap->pmp_link[pmp];
 			fbs_need_dec = true;
 		}

[30/85] ata_piix: IDE-mode SATA patch for Intel Coleto Creek DeviceIDs

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Seth Heasley <seth.heasley@intel.com>

commit c7e8695bfa0611b39493a9dfe8bab9f63f9809bd upstream.

This patch adds the IDE-mode SATA DeviceIDs for the Intel Coleto Creek PCH.

Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/ata/ata_piix.c | 2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -360,6 +360,8 @@ static const struct pci_device_id piix_p
 	/* SATA Controller IDE (BayTrail) */
 	{ 0x8086, 0x0F20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata_byt },
 	{ 0x8086, 0x0F21, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata_byt },
+	/* SATA Controller IDE (Coleto Creek) */
+	{ 0x8086, 0x23a6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
 
 	{ }	/* terminate list */
 };

[15/85] libata: skip SRST for all SIMG [34]7x port-multipliers

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Tejun Heo <tj@kernel.org>

commit 7a87718d92760fc688628ad6a430643dafa16f1f upstream.

For some reason, a lot of port-multipliers have issues with softreset.
SIMG [34]7x series port-multipliers have been quite erratic in this
regard.  I recall that it was better with some firmware revisions and
the current list of quirks worked fine for a while.  I think it got
worse with later firmwares or maybe my test coverage wasn't good
enough.  Anyways, HPA is reporting that his 3726 setup suffers SRST
failures and then the PMP gets confused and fails to probe the last
port.

The hope was that we try to stick to the standard as much as possible
and soonish the PMPs and their firmwares will improve in quality, so
the quirk list was kept to minimum.  Well, it seems like that's never
gonna happen.

Let's set NO_SRST for all [34]7x PMPs so that whatever remaining
userbase of the device suffer the least.  Maybe we should do the same
for 57xx's but unfortunately I don't have any device left to test and
I'm not even sure 57xx's have ever been made widely available, so
let's leave those alone for now.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/ata/libata-pmp.c | 33 +++++++++++++++++----------------
 1 file changed, 17 insertions(+), 16 deletions(-)

--- a/drivers/ata/libata-pmp.c
+++ b/drivers/ata/libata-pmp.c
@@ -389,9 +389,13 @@ static void sata_pmp_quirks(struct ata_p
 			/* link reports offline after LPM */
 			link->flags |= ATA_LFLAG_NO_LPM;
 
-			/* Class code report is unreliable. */
+			/*
+			 * Class code report is unreliable and SRST times
+			 * out under certain configurations.
+			 */
 			if (link->pmp < 5)
-				link->flags |= ATA_LFLAG_ASSUME_ATA;
+				link->flags |= ATA_LFLAG_NO_SRST |
+					       ATA_LFLAG_ASSUME_ATA;
 
 			/* port 5 is for SEMB device and it doesn't like SRST */
 			if (link->pmp == 5)
@@ -399,20 +403,17 @@ static void sata_pmp_quirks(struct ata_p
 					       ATA_LFLAG_ASSUME_SEMB;
 		}
 	} else if (vendor == 0x1095 && devid == 0x4723) {
-		/* sil4723 quirks */
-		ata_for_each_link(link, ap, EDGE) {
-			/* link reports offline after LPM */
-			link->flags |= ATA_LFLAG_NO_LPM;
-
-			/* class code report is unreliable */
-			if (link->pmp < 2)
-				link->flags |= ATA_LFLAG_ASSUME_ATA;
-
-			/* the config device at port 2 locks up on SRST */
-			if (link->pmp == 2)
-				link->flags |= ATA_LFLAG_NO_SRST |
-					       ATA_LFLAG_ASSUME_ATA;
-		}
+		/*
+		 * sil4723 quirks
+		 *
+		 * Link reports offline after LPM.  Class code report is
+		 * unreliable.  SIMG PMPs never got SRST reliable and the
+		 * config device at port 2 locks up on SRST.
+		 */
+		ata_for_each_link(link, ap, EDGE)
+			link->flags |= ATA_LFLAG_NO_LPM |
+				       ATA_LFLAG_NO_SRST |
+				       ATA_LFLAG_ASSUME_ATA;
 	} else if (vendor == 0x1095 && devid == 0x4726) {
 		/* sil4726 quirks */
 		ata_for_each_link(link, ap, EDGE) {

[76/85] perf: Fix perf_lock_task_context() vs RCU

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Peter Zijlstra <peterz@infradead.org>

commit 058ebd0eba3aff16b144eabf4510ed9510e1416e upstream.

Jiri managed to trigger this warning:

 [] ======================================================
 [] [ INFO: possible circular locking dependency detected ]
 [] 3.10.0+ #228 Tainted: G        W
 [] -------------------------------------------------------
 [] p/6613 is trying to acquire lock:
 []  (rcu_node_0){..-...}, at: [<ffffffff810ca797>] rcu_read_unlock_special+0xa7/0x250
 []
 [] but task is already holding lock:
 []  (&ctx->lock){-.-...}, at: [<ffffffff810f2879>] perf_lock_task_context+0xd9/0x2c0
 []
 [] which lock already depends on the new lock.
 []
 [] the existing dependency chain (in reverse order) is:
 []
 [] -> #4 (&ctx->lock){-.-...}:
 [] -> #3 (&rq->lock){-.-.-.}:
 [] -> #2 (&p->pi_lock){-.-.-.}:
 [] -> #1 (&rnp->nocb_gp_wq[1]){......}:
 [] -> #0 (rcu_node_0){..-...}:

Paul was quick to explain that due to preemptible RCU we cannot call
rcu_read_unlock() while holding scheduler (or nested) locks when part
of the read side critical section was preemptible.

Therefore solve it by making the entire RCU read side non-preemptible.

Also pull out the retry from under the non-preempt to play nice with RT.

Reported-by: Jiri Olsa <jolsa@redhat.com>
Helped-out-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 kernel/events/core.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -714,8 +714,18 @@ perf_lock_task_context(struct task_struc
 {
 	struct perf_event_context *ctx;
 
-	rcu_read_lock();
 retry:
+	/*
+	 * One of the few rules of preemptible RCU is that one cannot do
+	 * rcu_read_unlock() while holding a scheduler (or nested) lock when
+	 * part of the read side critical section was preemptible -- see
+	 * rcu_read_unlock_special().
+	 *
+	 * Since ctx->lock nests under rq->lock we must ensure the entire read
+	 * side critical section is non-preemptible.
+	 */
+	preempt_disable();
+	rcu_read_lock();
 	ctx = rcu_dereference(task->perf_event_ctxp[ctxn]);
 	if (ctx) {
 		/*
@@ -731,6 +741,8 @@ retry:
 		raw_spin_lock_irqsave(&ctx->lock, *flags);
 		if (ctx != rcu_dereference(task->perf_event_ctxp[ctxn])) {
 			raw_spin_unlock_irqrestore(&ctx->lock, *flags);
+			rcu_read_unlock();
+			preempt_enable();
 			goto retry;
 		}
 
@@ -740,6 +752,7 @@ retry:
 		}
 	}
 	rcu_read_unlock();
+	preempt_enable();
 	return ctx;
 }
 

[69/85] drivers/rtc/rtc-rv3029c2.c: fix disabling AIE irq

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Axel Lin <axel.lin@ingics.com>

commit 29ecd78c0fd6ee05f2c6b07b23823a6ae43c13ff upstream.

In the disable AIE irq code path, current code passes "1" to enable
parameter of rv3029c2_rtc_i2c_alarm_set_irq().  Thus it does not disable
AIE irq.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/rtc/rtc-rv3029c2.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/rtc/rtc-rv3029c2.c
+++ b/drivers/rtc/rtc-rv3029c2.c
@@ -310,7 +310,7 @@ static int rv3029c2_rtc_i2c_set_alarm(st
 		dev_dbg(&client->dev, "alarm IRQ armed\n");
 	} else {
 		/* disable AIE irq */
-		ret = rv3029c2_rtc_i2c_alarm_set_irq(client, 1);
+		ret = rv3029c2_rtc_i2c_alarm_set_irq(client, 0);
 		if (ret)
 			return ret;
 

[04/85] [SCSI] zfcp: block queue limits with data router

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Steffen Maier <maier@linux.vnet.ibm.com>

commit 5fea4291deacd80188b996d2f555fc6a1940e5d4 upstream.

Commit 86a9668a8d29ea711613e1cb37efa68e7c4db564
"[SCSI] zfcp: support for hardware data router"
reduced the initial block queue limits in the scsi_host_template to the
absolute minimum and adjusted them later on. However, the adjustment was
too late for the BSG devices of Scsi_Host and fc_host.

Therefore, ioctl(..., SG_IO, ...) with request or response size > 4kB to a
BSG device of an fc_host or a Scsi_Host fails with EINVAL. As a result,
users of such ioctl such as HBA_SendCTPassThru() in libzfcphbaapi return
with error HBA_STATUS_ERROR.

Initialize the block queue limits in zfcp_scsi_host_template to the
greatest common denominator (GCD).

While we cannot exploit the slightly enlarged maximum request size with
data router, this should be neglectible. Doing so also avoids running into
trouble after live guest relocation (LGR) / migration from a data router
FCP device to an FCP device that does not support data router. In that
case, zfcp would figure out the new limits on adapter recovery, but the
fc_host and Scsi_Host (plus in fact all sdevs) still exist with the old and
now too large queue limits.

It should also OK, not to use half the size as in the DIX case, because
fc_host and Scsi_Host do not transport FCP requests including SCSI commands
using protection data.

Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Reviewed-by: Martin Peschke <mpeschke@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
[bwh: Backported to 3.2: copyright notice changed slightly]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/s390/scsi/zfcp_scsi.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

--- a/drivers/s390/scsi/zfcp_scsi.c
+++ b/drivers/s390/scsi/zfcp_scsi.c
@@ -3,7 +3,7 @@
  *
  * Interface to Linux SCSI midlayer.
  *
- * Copyright IBM Corporation 2002, 2010
+ * Copyright IBM Corp. 2002, 2013
  */
 
 #define KMSG_COMPONENT "zfcp"
@@ -311,8 +311,12 @@ static struct scsi_host_template zfcp_sc
 	.proc_name		 = "zfcp",
 	.can_queue		 = 4096,
 	.this_id		 = -1,
-	.sg_tablesize		 = 1, /* adjusted later */
-	.max_sectors		 = 8, /* adjusted later */
+	.sg_tablesize		 = (((QDIO_MAX_ELEMENTS_PER_BUFFER - 1)
+				     * ZFCP_QDIO_MAX_SBALS_PER_REQ) - 2),
+				   /* GCD, adjusted later */
+	.max_sectors		 = (((QDIO_MAX_ELEMENTS_PER_BUFFER - 1)
+				     * ZFCP_QDIO_MAX_SBALS_PER_REQ) - 2) * 8,
+				   /* GCD, adjusted later */
 	.dma_boundary		 = ZFCP_QDIO_SBALE_LEN - 1,
 	.cmd_per_lun		 = 1,
 	.use_clustering		 = 1,

[82/85] ext4: fix overflow when counting used blocks on 32-bit architectures

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Jan Kara <jack@suse.cz>

commit 8af8eecc1331dbf5e8c662022272cf667e213da5 upstream.

The arithmetics adding delalloc blocks to the number of used blocks in
ext4_getattr() can easily overflow on 32-bit archs as we first multiply
number of blocks by blocksize and then divide back by 512. Make the
arithmetics more clever and also use proper type (unsigned long long
instead of unsigned long).

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 fs/ext4/inode.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -4335,7 +4335,7 @@ int ext4_getattr(struct vfsmount *mnt, s
 		 struct kstat *stat)
 {
 	struct inode *inode;
-	unsigned long delalloc_blocks;
+	unsigned long long delalloc_blocks;
 
 	inode = dentry->d_inode;
 	generic_fillattr(inode, stat);
@@ -4352,7 +4352,7 @@ int ext4_getattr(struct vfsmount *mnt, s
 	 */
 	delalloc_blocks = EXT4_I(inode)->i_reserved_data_blocks;
 
-	stat->blocks += (delalloc_blocks << inode->i_sb->s_blocksize_bits)>>9;
+	stat->blocks += delalloc_blocks << (inode->i_sb->s_blocksize_bits-9);
 	return 0;
 }
 

[32/85] Bluetooth: Fix invalid length check in l2cap_information_rsp()

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Jaganath Kanakkassery <jaganath.k@samsung.com>

commit 3f6fa3d489e127ca5a5b298eabac3ff5dbe0e112 upstream.

The length check is invalid since the length varies with type of
info response.

This was introduced by the commit cb3b3152b2f5939d67005cff841a1ca748b19888

Because of this, l2cap info rsp is not handled and command reject is sent.

> ACL data: handle 11 flags 0x02 dlen 16
        L2CAP(s): Info rsp: type 2 result 0
          Extended feature mask 0x00b8
            Enhanced Retransmission mode
            Streaming mode
            FCS Option
            Fixed Channels
< ACL data: handle 11 flags 0x00 dlen 10
        L2CAP(s): Command rej: reason 0
          Command not understood

Signed-off-by: Jaganath Kanakkassery <jaganath.k@samsung.com>
Signed-off-by: Chan-Yeol Park <chanyeol.park@samsung.com>
Acked-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 net/bluetooth/l2cap_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -2868,7 +2868,7 @@ static inline int l2cap_information_rsp(
 	struct l2cap_info_rsp *rsp = (struct l2cap_info_rsp *) data;
 	u16 type, result;
 
-	if (cmd_len != sizeof(*rsp))
+	if (cmd_len < sizeof(*rsp))
 		return -EPROTO;
 
 	type   = __le16_to_cpu(rsp->type);

[83/85] ext4: fix data offset overflow in ext4_xattr_fiemap() on 32-bit archs

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Jan Kara <jack@suse.cz>

commit a60697f411eb365fb09e639e6f183fe33d1eb796 upstream.

On 32-bit architectures with 32-bit sector_t computation of data offset
in ext4_xattr_fiemap() can overflow resulting in reporting bogus data
location. Fix the problem by typing block number to proper type before
shifting.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 fs/ext4/extents.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -4801,7 +4801,7 @@ static int ext4_xattr_fiemap(struct inod
 		error = ext4_get_inode_loc(inode, &iloc);
 		if (error)
 			return error;
-		physical = iloc.bh->b_blocknr << blockbits;
+		physical = (__u64)iloc.bh->b_blocknr << blockbits;
 		offset = EXT4_GOOD_OLD_INODE_SIZE +
 				EXT4_I(inode)->i_extra_isize;
 		physical += offset;
@@ -4809,7 +4809,7 @@ static int ext4_xattr_fiemap(struct inod
 		flags |= FIEMAP_EXTENT_DATA_INLINE;
 		brelse(iloc.bh);
 	} else { /* external block */
-		physical = EXT4_I(inode)->i_file_acl << blockbits;
+		physical = (__u64)EXT4_I(inode)->i_file_acl << blockbits;
 		length = inode->i_sb->s_blocksize;
 	}
 

[73/85] iscsi-target: Fix tfc_tpg_nacl_auth_cit configfs length overflow

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Jörn Engel <joern@logfs.org>

commit 0fbfc46fb0b2f543a8b539e94c6c293ebc0b05a6 upstream.

This patch fixes a potential buffer overflow while processing
iscsi_node_auth input for configfs attributes within NodeACL
tfc_tpg_nacl_auth_cit context.

Signed-off-by: Joern Engel <joern@logfs.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/target/iscsi/iscsi_target_configfs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/target/iscsi/iscsi_target_configfs.c
+++ b/drivers/target/iscsi/iscsi_target_configfs.c
@@ -419,7 +419,7 @@ static ssize_t __iscsi_##prefix##_store_
 	if (!capable(CAP_SYS_ADMIN))					\
 		return -EPERM;						\
 									\
-	snprintf(auth->name, PAGE_SIZE, "%s", page);			\
+	snprintf(auth->name, sizeof(auth->name), "%s", page);		\
 	if (!strncmp("NULL", auth->name, 4))				\
 		auth->naf_flags &= ~flags;				\
 	else								\

[59/85] nfsd4: fix decoding of compounds across page boundaries

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: "J. Bruce Fields" <bfields@redhat.com>

commit 247500820ebd02ad87525db5d9b199e5b66f6636 upstream.

A freebsd NFSv4.0 client was getting rare IO errors expanding a tarball.
A network trace showed the server returning BAD_XDR on the final getattr
of a getattr+write+getattr compound.  The final getattr started on a
page boundary.

I believe the Linux client ignores errors on the post-write getattr, and
that that's why we haven't seen this before.

Reported-by: Rick Macklem <rmacklem@uoguelph.ca>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 fs/nfsd/nfs4xdr.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/nfsd/nfs4xdr.c
+++ b/fs/nfsd/nfs4xdr.c
@@ -177,8 +177,8 @@ static __be32 *read_buf(struct nfsd4_com
 	 */
 	memcpy(p, argp->p, avail);
 	/* step to next page */
-	argp->p = page_address(argp->pagelist[0]);
 	argp->pagelist++;
+	argp->p = page_address(argp->pagelist[0]);
 	if (argp->pagelen < PAGE_SIZE) {
 		argp->end = argp->p + (argp->pagelen>>2);
 		argp->pagelen = 0;

[68/85] crypto: sanitize argument for format string

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Kees Cook <keescook@chromium.org>

commit 1c8fca1d92e14859159a82b8a380d220139b7344 upstream.

The template lookup interface does not provide a way to use format
strings, so make sure that the interface cannot be abused accidentally.

Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 crypto/algapi.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/crypto/algapi.c
+++ b/crypto/algapi.c
@@ -477,7 +477,8 @@ static struct crypto_template *__crypto_
 
 struct crypto_template *crypto_lookup_template(const char *name)
 {
-	return try_then_request_module(__crypto_lookup_template(name), name);
+	return try_then_request_module(__crypto_lookup_template(name), "%s",
+				       name);
 }
 EXPORT_SYMBOL_GPL(crypto_lookup_template);
 

[10/85] zram: destroy all devices on error recovery path in zram_init()

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Jiang Liu <liuj97@gmail.com>

commit 39a9b8ac9333e4268ecff7da6c9d1ab3823ff243 upstream.

On error recovery path of zram_init(), it leaks the zram device object
causing the failure. So change create_device() to free allocated
resources on error path.

Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/staging/zram/zram_drv.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

--- a/drivers/staging/zram/zram_drv.c
+++ b/drivers/staging/zram/zram_drv.c
@@ -715,7 +715,7 @@ static const struct block_device_operati
 
 static int create_device(struct zram *zram, int device_id)
 {
-	int ret = 0;
+	int ret = -ENOMEM;
 
 	init_rwsem(&zram->lock);
 	init_rwsem(&zram->init_lock);
@@ -725,7 +725,6 @@ static int create_device(struct zram *zr
 	if (!zram->queue) {
 		pr_err("Error allocating disk queue for device %d\n",
 			device_id);
-		ret = -ENOMEM;
 		goto out;
 	}
 
@@ -735,11 +734,9 @@ static int create_device(struct zram *zr
 	 /* gendisk structure */
 	zram->disk = alloc_disk(1);
 	if (!zram->disk) {
-		blk_cleanup_queue(zram->queue);
 		pr_warning("Error allocating disk structure for device %d\n",
 			device_id);
-		ret = -ENOMEM;
-		goto out;
+		goto out_free_queue;
 	}
 
 	zram->disk->major = zram_major;
@@ -768,11 +765,17 @@ static int create_device(struct zram *zr
 				&zram_disk_attr_group);
 	if (ret < 0) {
 		pr_warning("Error creating sysfs group");
-		goto out;
+		goto out_free_disk;
 	}
 
 	zram->init_done = 0;
+	return 0;
 
+out_free_disk:
+	del_gendisk(zram->disk);
+	put_disk(zram->disk);
+out_free_queue:
+	blk_cleanup_queue(zram->queue);
 out:
 	return ret;
 }

[58/85] jbd2: fix theoretical race in jbd2__journal_restart

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Theodore Ts'o <tytso@mit.edu>

commit 39c04153fda8c32e85b51c96eb5511a326ad7609 upstream.

Once we decrement transaction->t_updates, if this is the last handle
holding the transaction from closing, and once we release the
t_handle_lock spinlock, it's possible for the transaction to commit
and be released.  In practice with normal kernels, this probably won't
happen, since the commit happens in a separate kernel thread and it's
unlikely this could all happen within the space of a few CPU cycles.

On the other hand, with a real-time kernel, this could potentially
happen, so save the tid found in transaction->t_tid before we release
t_handle_lock.  It would require an insane configuration, such as one
where the jbd2 thread was set to a very high real-time priority,
perhaps because a high priority real-time thread is trying to read or
write to a file system.  But some people who use real-time kernels
have been known to do insane things, including controlling
laser-wielding industrial robots.  :-)

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 fs/jbd2/transaction.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/jbd2/transaction.c
+++ b/fs/jbd2/transaction.c
@@ -470,10 +470,10 @@ int jbd2__journal_restart(handle_t *hand
 		   &transaction->t_outstanding_credits);
 	if (atomic_dec_and_test(&transaction->t_updates))
 		wake_up(&journal->j_wait_updates);
+	tid = transaction->t_tid;
 	spin_unlock(&transaction->t_handle_lock);
 
 	jbd_debug(2, "restarting handle %p\n", handle);
-	tid = transaction->t_tid;
 	need_to_start = !tid_geq(journal->j_commit_request, tid);
 	read_unlock(&journal->j_state_lock);
 	if (need_to_start)

[44/85] [SCSI] sd: Fix parsing of 'temporary ' cache mode prefix

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Ben Hutchings <ben@decadent.org.uk>

commit 2ee3e26c673e75c05ef8b914f54fadee3d7b9c88 upstream.

Commit 39c60a0948cc '[SCSI] sd: fix array cache flushing bug causing
performance problems' added temp as a pointer to "temporary " and used
sizeof(temp) - 1 as its length.  But sizeof(temp) is the size of the
pointer, not the size of the string constant.  Change temp to a static
array so that sizeof() does what was intended.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
---
 drivers/scsi/sd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -138,7 +138,7 @@ sd_store_cache_type(struct device *dev,
 	char *buffer_data;
 	struct scsi_mode_data data;
 	struct scsi_sense_hdr sshdr;
-	const char *temp = "temporary ";
+	static const char temp[] = "temporary ";
 	int len;
 
 	if (sdp->type != TYPE_DISK)

[72/85] [SCSI] megaraid_sas: fix memory leak if SGL has zero length entries

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Bjørn Mork <bjorn@mork.no>

commit 7a6a731bd00ca90d0e250867c3b9c05b5ff0fa49 upstream.

commit 98cb7e44 ([SCSI] megaraid_sas: Sanity check user
supplied length before passing it to dma_alloc_coherent())
introduced a memory leak.  Memory allocated for entries
following zero length SGL entries will not be freed.

Reference: http://bugs.debian.org/688198

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Acked-by: Adam Radford <aradford@gmail.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/scsi/megaraid/megaraid_sas_base.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -4886,10 +4886,12 @@ megasas_mgmt_fw_ioctl(struct megasas_ins
 				    sense, sense_handle);
 	}
 
-	for (i = 0; i < ioc->sge_count && kbuff_arr[i]; i++) {
-		dma_free_coherent(&instance->pdev->dev,
-				    kern_sge32[i].length,
-				    kbuff_arr[i], kern_sge32[i].phys_addr);
+	for (i = 0; i < ioc->sge_count; i++) {
+		if (kbuff_arr[i])
+			dma_free_coherent(&instance->pdev->dev,
+					  kern_sge32[i].length,
+					  kbuff_arr[i],
+					  kern_sge32[i].phys_addr);
 	}
 
 	megasas_return_cmd(instance, cmd);

[42/85] perf: Disable monitoring on setuid processes for regular users

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Stephane Eranian <eranian@google.com>

commit 2976b10f05bd7f6dab9f9e7524451ddfed656a89 upstream.

There was a a bug in setup_new_exec(), whereby
the test to disabled perf monitoring was not
correct because the new credentials for the
process were not yet committed and therefore
the get_dumpable() test was never firing.

The patch fixes the problem by moving the
perf_event test until after the credentials
are committed.

Signed-off-by: Stephane Eranian <eranian@google.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 fs/exec.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

--- a/fs/exec.c
+++ b/fs/exec.c
@@ -1159,13 +1159,6 @@ void setup_new_exec(struct linux_binprm
 			set_dumpable(current->mm, suid_dumpable);
 	}
 
-	/*
-	 * Flush performance counters when crossing a
-	 * security domain:
-	 */
-	if (!get_dumpable(current->mm))
-		perf_event_exit_task(current);
-
 	/* An exec changes our domain. We are no longer part of the thread
 	   group */
 
@@ -1229,6 +1222,15 @@ void install_exec_creds(struct linux_bin
 
 	commit_creds(bprm->cred);
 	bprm->cred = NULL;
+
+	/*
+	 * Disable monitoring for regular users
+	 * when executing setuid binaries. Must
+	 * wait until new credentials are committed
+	 * by commit_creds() above
+	 */
+	if (get_dumpable(current->mm) != SUID_DUMP_USER)
+		perf_event_exit_task(current);
 	/*
 	 * cred_guard_mutex must be held at least to this point to prevent
 	 * ptrace_attach() from altering our determination of the task's

[85/85] MAINTAINERS: add stable_kernel_rules.txt to stable maintainer information

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7b175c46720f8e6b92801bb634c93d1016f80c62 upstream.

This hopefully will help point developers to the proper way that patches
should be submitted for inclusion in the stable kernel releases.

Reported-by: David Howells <dhowells@redhat.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 MAINTAINERS | 1 +
 1 file changed, 1 insertion(+)

--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6260,6 +6260,7 @@ STABLE BRANCH
 M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 L:	stable@vger.kernel.org
 S:	Supported
+F:	Documentation/stable_kernel_rules.txt
 
 STAGING SUBSYSTEM
 M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[02/85] printk: Fix rq->lock vs logbuf_lock unlock lock inversion

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: "Bu, Yitian" <ybu@qti.qualcomm.com>

commit dbda92d16f8655044e082930e4e9d244b87fde77 upstream.

commit 07354eb1a74d1 ("locking printk: Annotate logbuf_lock as raw")
reintroduced a lock inversion problem which was fixed in commit
0b5e1c5255 ("printk: Release console_sem after logbuf_lock"). This
happened probably when fixing up patch rejects.

Restore the ordering and unlock logbuf_lock before releasing
console_sem.

Signed-off-by: ybu <ybu@qti.qualcomm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/E807E903FE6CBE4D95E420FBFCC273B827413C@nasanexd01h.na.qualcomm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 kernel/printk.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/kernel/printk.c
+++ b/kernel/printk.c
@@ -813,9 +813,9 @@ static int console_trylock_for_printk(un
 		}
 	}
 	printk_cpu = UINT_MAX;
+	raw_spin_unlock(&logbuf_lock);
 	if (wake)
 		up(&console_sem);
-	raw_spin_unlock(&logbuf_lock);
 	return retval;
 }
 static const char recursion_bug_msg [] =

[18/85] ath9k: fill channel mode in caldata

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>

commit 77d848372875d2e4cbdbf07030f0e08cab5e7f4d upstream.

It is useful to have channel mode in caldata to find out
whether operaing channel is in HT40/20 when we are currently
on offchannel. It will be used by BTCOEX to enable/disable
concurrent tx mechanism later.

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/net/wireless/ath/ath9k/calib.c | 1 +
 drivers/net/wireless/ath/ath9k/hw.h    | 1 +
 2 files changed, 2 insertions(+)

--- a/drivers/net/wireless/ath/ath9k/calib.c
+++ b/drivers/net/wireless/ath/ath9k/calib.c
@@ -413,6 +413,7 @@ void ath9k_init_nfcal_hist_buffer(struct
 
 	ah->caldata->channel = chan->channel;
 	ah->caldata->channelFlags = chan->channelFlags & ~CHANNEL_CW_INT;
+	ah->caldata->chanmode = chan->chanmode;
 	h = ah->caldata->nfCalHist;
 	default_nf = ath9k_hw_get_default_nf(ah, chan);
 	for (i = 0; i < NUM_NF_READINGS; i++) {
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -352,6 +352,7 @@ struct ath9k_rtt_hist {
 struct ath9k_hw_cal_data {
 	u16 channel;
 	u32 channelFlags;
+	u32 chanmode;
 	int32_t CalValid;
 	int8_t iCoff;
 	int8_t qCoff;

[47/85] dlci: acquire rtnl_lock before calling __dev_get_by_name()

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Zefan Li <lizefan@huawei.com>

commit 11eb2645cbf38a08ae491bf6c602eea900ec0bb5 upstream.

Otherwise the net device returned can be freed at anytime.

Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/net/wan/dlci.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

--- a/drivers/net/wan/dlci.c
+++ b/drivers/net/wan/dlci.c
@@ -386,20 +386,24 @@ static int dlci_del(struct dlci_add *dlc
 	struct net_device	*master, *slave;
 	int			err;
 
+	rtnl_lock();
+
 	/* validate slave device */
 	master = __dev_get_by_name(&init_net, dlci->devname);
-	if (!master)
-		return -ENODEV;
+	if (!master) {
+		err = -ENODEV;
+		goto out;
+	}
 
 	if (netif_running(master)) {
-		return -EBUSY;
+		err = -EBUSY;
+		goto out;
 	}
 
 	dlp = netdev_priv(master);
 	slave = dlp->slave;
 	flp = netdev_priv(slave);
 
-	rtnl_lock();
 	err = (*flp->deassoc)(slave, master);
 	if (!err) {
 		list_del(&dlp->list);
@@ -408,8 +412,8 @@ static int dlci_del(struct dlci_add *dlc
 
 		dev_put(slave);
 	}
+out:
 	rtnl_unlock();
-
 	return err;
 }
 

[11/85] zram: avoid access beyond the zram device

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Jiang Liu <liuj97@gmail.com>

commit 12a7ad3b810e77137d0caf97a6dd97591e075b30 upstream.

Function valid_io_request() should verify the entire request are within
the zram device address range. Otherwise it may cause invalid memory
access when accessing/modifying zram->meta->table[index] because the
'index' is out of range. Then it may access non-exist memory, randomly
modify memory belong to other subsystems, which is hard to track down.

Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/staging/zram/zram_drv.c | 17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)

--- a/drivers/staging/zram/zram_drv.c
+++ b/drivers/staging/zram/zram_drv.c
@@ -541,13 +541,20 @@ out:
  */
 static inline int valid_io_request(struct zram *zram, struct bio *bio)
 {
-	if (unlikely(
-		(bio->bi_sector >= (zram->disksize >> SECTOR_SHIFT)) ||
-		(bio->bi_sector & (ZRAM_SECTOR_PER_LOGICAL_BLOCK - 1)) ||
-		(bio->bi_size & (ZRAM_LOGICAL_BLOCK_SIZE - 1)))) {
+	u64 start, end, bound;
+	
+	/* unaligned request */
+	if (unlikely(bio->bi_sector & (ZRAM_SECTOR_PER_LOGICAL_BLOCK - 1)))
+		return 0;
+	if (unlikely(bio->bi_size & (ZRAM_LOGICAL_BLOCK_SIZE - 1)))
+		return 0;
 
+	start = bio->bi_sector;
+	end = start + (bio->bi_size >> SECTOR_SHIFT);
+	bound = zram->disksize >> SECTOR_SHIFT;
+	/* out of range range */
+	if (unlikely(start >= bound || end >= bound || start > end))
 		return 0;
-	}
 
 	/* I/O request is valid */
 	return 1;

[16/85] b43: ensue that BCMA is "y" when B43 is "y"

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Hauke Mehrtens <hauke@hauke-m.de>

commit 693026ef2e751fd94d2e6c71028e68343cc875d5 upstream.

When b43 gets build into the kernel and it should use bcma we have to
ensure that bcma was also build into the kernel and not as a module.
In this patch this is also done for SSB, although you can not
build b43 without ssb support for now.

This fixes a build problem reported by Randy Dunlap in
5187EB95.2060605@infradead.org

Reported-By: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/net/wireless/b43/Kconfig | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/net/wireless/b43/Kconfig
+++ b/drivers/net/wireless/b43/Kconfig
@@ -28,12 +28,12 @@ config B43
 
 config B43_BCMA
 	bool "Support for BCMA bus"
-	depends on B43 && BCMA
+	depends on B43 && (BCMA = y || BCMA = B43)
 	default y
 
 config B43_SSB
 	bool
-	depends on B43 && SSB
+	depends on B43 && (SSB = y || SSB = B43)
 	default y
 
 # Auto-select SSB PCI-HOST support, if possible

[20/85] ath9k: Do not assign noise for NULL caldata

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Sujith Manoharan <c_manoha@qca.qualcomm.com>

commit d3bcb7b24bbf09fde8405770e676fe0c11c79662 upstream.

ah->noise is maintained globally and not per-channel. This
is updated in the reset() routine after the NF history has been
filled for the *current channel*, just before switching to
the new channel. There is no need to do it inside getnf(), since
ah->noise must contain a value for the new channel.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/net/wireless/ath/ath9k/calib.c | 1 -
 1 file changed, 1 deletion(-)

--- a/drivers/net/wireless/ath/ath9k/calib.c
+++ b/drivers/net/wireless/ath/ath9k/calib.c
@@ -391,7 +391,6 @@ bool ath9k_hw_getnf(struct ath_hw *ah, s
 
 	if (!caldata) {
 		chan->noisefloor = nf;
-		ah->noise = ath9k_hw_getchan_noise(ah, chan);
 		return false;
 	}
 

[24/85] ALSA: hda - Cache the MUX selection for generic HDMI

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit bddee96b5d0db869f47b195fe48c614ca824203c upstream.

When a selection to a converter MUX is changed in hdmi_pcm_open(), it
should be cached so that the given connection can be restored properly
at PM resume.  We need just to replace the corresponding
snd_hda_codec_write() call with snd_hda_codec_write_cache().

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 sound/pci/hda/patch_hdmi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -902,7 +902,7 @@ static int hdmi_pcm_open(struct hda_pcm_
 	per_cvt->assigned = 1;
 	hinfo->nid = per_cvt->cvt_nid;
 
-	snd_hda_codec_write(codec, per_pin->pin_nid, 0,
+	snd_hda_codec_write_cache(codec, per_pin->pin_nid, 0,
 			    AC_VERB_SET_CONNECT_SEL,
 			    mux_idx);
 	snd_hda_spdif_ctls_assign(codec, pin_idx, per_cvt->cvt_nid);

[06/85] ahci: Add AMD CZ SATA device ID

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Shane Huang <shane.huang@amd.com>

commit fafe5c3d82a470d73de53e6b08eb4e28d974d895 upstream.

To add AMD CZ SATA controller device ID of IDE mode.

[bhelgaas: drop pci_ids.h update]
Signed-off-by: Shane Huang <shane.huang@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/ata/ahci.c   | 1 +
 drivers/pci/quirks.c | 2 ++
 2 files changed, 3 insertions(+)

--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -318,6 +318,7 @@ static const struct pci_device_id ahci_p
 
 	/* AMD */
 	{ PCI_VDEVICE(AMD, 0x7800), board_ahci }, /* AMD Hudson-2 */
+	{ PCI_VDEVICE(AMD, 0x7900), board_ahci }, /* AMD CZ */
 	/* AMD is using RAID class only for ahci controllers */
 	{ PCI_VENDOR_ID_AMD, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
 	  PCI_CLASS_STORAGE_RAID << 8, 0xffffff, board_ahci },
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1123,6 +1123,8 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_A
 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_amd_ide_mode);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE, quirk_amd_ide_mode);
 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE, quirk_amd_ide_mode);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x7900, quirk_amd_ide_mode);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, 0x7900, quirk_amd_ide_mode);
 
 /*
  *	Serverworks CSB5 IDE does not fully support native mode

[09/85] zram: use zram->lock to protect zram_free_page() in swap free notify path

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Jiang Liu <liuj97@gmail.com>

commit 57ab048532c0d975538cebd4456491b5c34248f4 upstream.

zram_slot_free_notify() is free-running without any protection from
concurrent operations. So there are race conditions between
zram_bvec_read()/zram_bvec_write() and zram_slot_free_notify(),
and possible consequences include:
1) Trigger BUG_ON(!handle) on zram_bvec_write() side.
2) Access to freed pages on zram_bvec_read() side.
3) Break some fields (bad_compress, good_compress, pages_stored)
   in zram->stats if the swap layer makes concurrently call to
   zram_slot_free_notify().

So enhance zram_slot_free_notify() to acquire writer lock on zram->lock
before calling zram_free_page().

Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/staging/zram/zram_drv.c | 2 ++
 drivers/staging/zram/zram_drv.h | 5 +++--
 2 files changed, 5 insertions(+), 2 deletions(-)

--- a/drivers/staging/zram/zram_drv.c
+++ b/drivers/staging/zram/zram_drv.c
@@ -702,7 +702,9 @@ static void zram_slot_free_notify(struct
 	struct zram *zram;
 
 	zram = bdev->bd_disk->private_data;
+	down_write(&zram->lock);
 	zram_free_page(zram, index);
+	up_write(&zram->lock);
 	zram_stat64_inc(zram, &zram->stats.notify_free);
 }
 
--- a/drivers/staging/zram/zram_drv.h
+++ b/drivers/staging/zram/zram_drv.h
@@ -107,8 +107,9 @@ struct zram {
 	void *compress_buffer;
 	struct table *table;
 	spinlock_t stat64_lock;	/* protect 64-bit stats */
-	struct rw_semaphore lock; /* protect compression buffers and table
-				   * against concurrent read and writes */
+	struct rw_semaphore lock; /* protect compression buffers, table,
+				   * 32bit stat counters against concurrent
+				   * notifications, reads and writes */
 	struct request_queue *queue;
 	struct gendisk *disk;
 	int init_done;

[38/85] USB: option,qcserial: move Novatel Gobi1K IDs to qcserial

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Williams <dcbw@redhat.com>

commit a254810a86aaaac4ac6ba44fa934558b042a17a7 upstream.

These devices are all Gobi1K devices (according to the Windows INF
files) and should be handled by qcserial instead of option.  Their
network port is handled by qmi_wwan.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/usb/serial/option.c   | 4 ----
 drivers/usb/serial/qcserial.c | 8 +++++++-
 2 files changed, 7 insertions(+), 5 deletions(-)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -159,8 +159,6 @@ static void option_instat_callback(struc
 #define NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_FULLSPEED	0x9000
 #define NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_HIGHSPEED	0x9001
 #define NOVATELWIRELESS_PRODUCT_E362		0x9010
-#define NOVATELWIRELESS_PRODUCT_G1		0xA001
-#define NOVATELWIRELESS_PRODUCT_G1_M		0xA002
 #define NOVATELWIRELESS_PRODUCT_G2		0xA010
 #define NOVATELWIRELESS_PRODUCT_MC551		0xB001
 
@@ -744,8 +742,6 @@ static const struct usb_device_id option
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC547) },
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_HIGHSPEED) },
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_HIGHSPEED) },
-	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_G1) },
-	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_G1_M) },
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_G2) },
 	/* Novatel Ovation MC551 a.k.a. Verizon USB551L */
 	{ USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC551, 0xff, 0xff, 0xff) },
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -37,7 +37,13 @@ static const struct usb_device_id id_tab
 	{DEVICE_G1K(0x04da, 0x250c)},	/* Panasonic Gobi QDL device */
 	{DEVICE_G1K(0x413c, 0x8172)},	/* Dell Gobi Modem device */
 	{DEVICE_G1K(0x413c, 0x8171)},	/* Dell Gobi QDL device */
-	{DEVICE_G1K(0x1410, 0xa001)},	/* Novatel Gobi Modem device */
+	{DEVICE_G1K(0x1410, 0xa001)},	/* Novatel/Verizon USB-1000 */
+	{DEVICE_G1K(0x1410, 0xa002)},	/* Novatel Gobi Modem device */
+	{DEVICE_G1K(0x1410, 0xa003)},	/* Novatel Gobi Modem device */
+	{DEVICE_G1K(0x1410, 0xa004)},	/* Novatel Gobi Modem device */
+	{DEVICE_G1K(0x1410, 0xa005)},	/* Novatel Gobi Modem device */
+	{DEVICE_G1K(0x1410, 0xa006)},	/* Novatel Gobi Modem device */
+	{DEVICE_G1K(0x1410, 0xa007)},	/* Novatel Gobi Modem device */
 	{DEVICE_G1K(0x1410, 0xa008)},	/* Novatel Gobi QDL device */
 	{DEVICE_G1K(0x0b05, 0x1776)},	/* Asus Gobi Modem device */
 	{DEVICE_G1K(0x0b05, 0x1774)},	/* Asus Gobi QDL device */

[08/85] zram: avoid invalid memory access in zram_exit()

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Jiang Liu <liuj97@gmail.com>

commit 6030ea9b35971a4200062f010341ab832e878ac9 upstream.

Memory for zram->disk object may have already been freed after returning
from destroy_device(zram), then it's unsafe for zram_reset_device(zram)
to access zram->disk again.

We can't solve this bug by flipping the order of destroy_device(zram)
and zram_reset_device(zram), that will cause deadlock issues to the
zram sysfs handler.

So fix it by holding an extra reference to zram->disk before calling
destroy_device(zram).

Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/staging/zram/zram_drv.c | 2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/staging/zram/zram_drv.c
+++ b/drivers/staging/zram/zram_drv.c
@@ -846,9 +846,11 @@ static void __exit zram_exit(void)
 	for (i = 0; i < zram_num_devices; i++) {
 		zram = &zram_devices[i];
 
+		get_disk(zram->disk);
 		destroy_device(zram);
 		if (zram->init_done)
 			zram_reset_device(zram);
+		put_disk(zram->disk);
 	}
 
 	unregister_blkdev(zram_major, "zram");

[68/85] crypto: sanitize argument for format string

[Ben Hutchings]

3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Kees Cook <keescook@chromium.org>

commit 1c8fca1d92e14859159a82b8a380d220139b7344 upstream.

The template lookup interface does not provide a way to use format
strings, so make sure that the interface cannot be abused accidentally.

Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 crypto/algapi.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/crypto/algapi.c
+++ b/crypto/algapi.c
@@ -477,7 +477,8 @@ static struct crypto_template *__crypto_
 
 struct crypto_template *crypto_lookup_template(const char *name)
 {
-	return try_then_request_module(__crypto_lookup_template(name), name);
+	return try_then_request_module(__crypto_lookup_template(name), "%s",
+				       name);
 }
 EXPORT_SYMBOL_GPL(crypto_lookup_template);
 

Re: [00/85] 3.2.49-rc1 review

[Ben Hutchings]

[-- Attachment #1.1: Type: text/plain, Size: 163 bytes --]

This is the combined patch for 3.2.49-rc1 relative to 3.2.48.

Ben.

-- 
Ben Hutchings
Once a job is fouled up, anything done to improve it makes it worse.

[-- Attachment #1.2: linux-3.2.49-rc1.patch --]
[-- Type: text/x-patch, Size: 114023 bytes --]

diff --git a/Documentation/i2c/busses/i2c-piix4 b/Documentation/i2c/busses/i2c-piix4
index 475bb4a..65da157 100644
--- a/Documentation/i2c/busses/i2c-piix4
+++ b/Documentation/i2c/busses/i2c-piix4
@@ -8,7 +8,7 @@ Supported adapters:
     Datasheet: Only available via NDA from ServerWorks
   * ATI IXP200, IXP300, IXP400, SB600, SB700 and SB800 southbridges
     Datasheet: Not publicly available
-  * AMD Hudson-2
+  * AMD Hudson-2, CZ
     Datasheet: Not publicly available
   * Standard Microsystems (SMSC) SLC90E66 (Victory66) southbridge
     Datasheet: Publicly available at the SMSC website http://www.smsc.com
diff --git a/MAINTAINERS b/MAINTAINERS
index 83f156e..8659eba 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -159,7 +159,7 @@ S:	Maintained
 F:	drivers/net/ethernet/realtek/r8169.c
 
 8250/16?50 (AND CLONE UARTS) SERIAL DRIVER
-M:	Greg Kroah-Hartman <gregkh@suse.de>
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 L:	linux-serial@vger.kernel.org
 W:	http://serial.sourceforge.net
 S:	Maintained
@@ -1781,9 +1781,9 @@ X:	net/wireless/wext*
 
 CHAR and MISC DRIVERS
 M:	Arnd Bergmann <arnd@arndb.de>
-M:	Greg Kroah-Hartman <greg@kroah.com>
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git
-S:	Maintained
+S:	Supported
 F:	drivers/char/*
 F:	drivers/misc/*
 
@@ -2315,7 +2315,7 @@ F:	lib/lru_cache.c
 F:	Documentation/blockdev/drbd/
 
 DRIVER CORE, KOBJECTS, DEBUGFS AND SYSFS
-M:	Greg Kroah-Hartman <gregkh@suse.de>
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6.git
 S:	Supported
 F:	Documentation/kobject.txt
@@ -6257,15 +6257,16 @@ S:	Maintained
 F:	arch/alpha/kernel/srm_env.c
 
 STABLE BRANCH
-M:	Greg Kroah-Hartman <greg@kroah.com>
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 L:	stable@vger.kernel.org
-S:	Maintained
+S:	Supported
+F:	Documentation/stable_kernel_rules.txt
 
 STAGING SUBSYSTEM
-M:	Greg Kroah-Hartman <gregkh@suse.de>
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git
 L:	devel@driverdev.osuosl.org
-S:	Maintained
+S:	Supported
 F:	drivers/staging/
 
 STAGING - AGERE HERMES II and II.5 WIRELESS DRIVERS
@@ -6654,8 +6655,8 @@ S:	Maintained
 K:	^Subject:.*(?i)trivial
 
 TTY LAYER
-M:	Greg Kroah-Hartman <gregkh@suse.de>
-S:	Maintained
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+S:	Supported
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6.git
 F:	drivers/tty/*
 F:	drivers/tty/serial/serial_core.c
@@ -6943,7 +6944,7 @@ S:	Maintained
 F:	drivers/usb/serial/digi_acceleport.c
 
 USB SERIAL DRIVER
-M:	Greg Kroah-Hartman <gregkh@suse.de>
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 L:	linux-usb@vger.kernel.org
 S:	Supported
 F:	Documentation/usb/usb-serial.txt
@@ -6958,9 +6959,8 @@ S:	Maintained
 F:	drivers/usb/serial/empeg.c
 
 USB SERIAL KEYSPAN DRIVER
-M:	Greg Kroah-Hartman <greg@kroah.com>
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 L:	linux-usb@vger.kernel.org
-W:	http://www.kroah.com/linux/
 S:	Maintained
 F:	drivers/usb/serial/*keyspan*
 
@@ -6988,7 +6988,7 @@ F:	Documentation/video4linux/sn9c102.txt
 F:	drivers/media/video/sn9c102/
 
 USB SUBSYSTEM
-M:	Greg Kroah-Hartman <gregkh@suse.de>
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 L:	linux-usb@vger.kernel.org
 W:	http://www.linux-usb.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6.git
@@ -7075,7 +7075,7 @@ F:	fs/hppfs/
 
 USERSPACE I/O (UIO)
 M:	"Hans J. Koch" <hjk@hansjkoch.de>
-M:	Greg Kroah-Hartman <gregkh@suse.de>
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 S:	Maintained
 F:	Documentation/DocBook/uio-howto.tmpl
 F:	drivers/uio/
diff --git a/Makefile b/Makefile
index 299e2eb..2adc039 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 2
-SUBLEVEL = 48
-EXTRAVERSION =
+SUBLEVEL = 49
+EXTRAVERSION = -rc1
 NAME = Saber-toothed Squirrel
 
 # *DOCUMENTATION*
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index a559ee7..778d248 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -795,6 +795,7 @@ perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs)
 	struct frame_tail __user *tail;
 
 
+	perf_callchain_store(entry, regs->ARM_pc);
 	tail = (struct frame_tail __user *)regs->ARM_fp - 1;
 
 	while ((entry->nr < PERF_MAX_STACK_DEPTH) &&
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index fb9bb46..2c8890a 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -74,7 +74,7 @@
 #endif
 
 int boot_cpuid = 0;
-int __initdata spinning_secondaries;
+int spinning_secondaries;
 u64 ppc64_pft_size;
 
 /* Pick defaults since we might want to patch instructions
diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c
index 054cc01..d50a821 100644
--- a/arch/x86/xen/time.c
+++ b/arch/x86/xen/time.c
@@ -36,9 +36,8 @@ static DEFINE_PER_CPU(struct vcpu_runstate_info, xen_runstate);
 /* snapshots of runstate info */
 static DEFINE_PER_CPU(struct vcpu_runstate_info, xen_runstate_snapshot);
 
-/* unused ns of stolen and blocked time */
+/* unused ns of stolen time */
 static DEFINE_PER_CPU(u64, xen_residual_stolen);
-static DEFINE_PER_CPU(u64, xen_residual_blocked);
 
 /* return an consistent snapshot of 64-bit time/counter value */
 static u64 get64(const u64 *p)
@@ -115,7 +114,7 @@ static void do_stolen_accounting(void)
 {
 	struct vcpu_runstate_info state;
 	struct vcpu_runstate_info *snap;
-	s64 blocked, runnable, offline, stolen;
+	s64 runnable, offline, stolen;
 	cputime_t ticks;
 
 	get_runstate_snapshot(&state);
@@ -125,7 +124,6 @@ static void do_stolen_accounting(void)
 	snap = &__get_cpu_var(xen_runstate_snapshot);
 
 	/* work out how much time the VCPU has not been runn*ing*  */
-	blocked = state.time[RUNSTATE_blocked] - snap->time[RUNSTATE_blocked];
 	runnable = state.time[RUNSTATE_runnable] - snap->time[RUNSTATE_runnable];
 	offline = state.time[RUNSTATE_offline] - snap->time[RUNSTATE_offline];
 
@@ -141,17 +139,6 @@ static void do_stolen_accounting(void)
 	ticks = iter_div_u64_rem(stolen, NS_PER_TICK, &stolen);
 	__this_cpu_write(xen_residual_stolen, stolen);
 	account_steal_ticks(ticks);
-
-	/* Add the appropriate number of ticks of blocked time,
-	   including any left-overs from last time. */
-	blocked += __this_cpu_read(xen_residual_blocked);
-
-	if (blocked < 0)
-		blocked = 0;
-
-	ticks = iter_div_u64_rem(blocked, NS_PER_TICK, &blocked);
-	__this_cpu_write(xen_residual_blocked, blocked);
-	account_idle_ticks(ticks);
 }
 
 /* Get the TSC speed from Xen */
diff --git a/block/genhd.c b/block/genhd.c
index 6edf228..8bd4ef2 100644
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -519,7 +519,7 @@ void register_disk(struct gendisk *disk)
 
 	ddev->parent = disk->driverfs_dev;
 
-	dev_set_name(ddev, disk->disk_name);
+	dev_set_name(ddev, "%s", disk->disk_name);
 
 	/* delay uevents, until we scanned partition table */
 	dev_set_uevent_suppress(ddev, 1);
diff --git a/crypto/algapi.c b/crypto/algapi.c
index 54dd4e3..dc9991f 100644
--- a/crypto/algapi.c
+++ b/crypto/algapi.c
@@ -477,7 +477,8 @@ static struct crypto_template *__crypto_lookup_template(const char *name)
 
 struct crypto_template *crypto_lookup_template(const char *name)
 {
-	return try_then_request_module(__crypto_lookup_template(name), name);
+	return try_then_request_module(__crypto_lookup_template(name), "%s",
+				       name);
 }
 EXPORT_SYMBOL_GPL(crypto_lookup_template);
 
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 87acc23..0445f52 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -302,6 +302,7 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	{ PCI_VDEVICE(INTEL, 0x8d64), board_ahci }, /* Wellsburg RAID */
 	{ PCI_VDEVICE(INTEL, 0x8d66), board_ahci }, /* Wellsburg RAID */
 	{ PCI_VDEVICE(INTEL, 0x8d6e), board_ahci }, /* Wellsburg RAID */
+	{ PCI_VDEVICE(INTEL, 0x23a3), board_ahci }, /* Coleto Creek AHCI */
 
 	/* JMicron 360/1/3/5/6, match class to avoid IDE function */
 	{ PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
@@ -318,6 +319,7 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 
 	/* AMD */
 	{ PCI_VDEVICE(AMD, 0x7800), board_ahci }, /* AMD Hudson-2 */
+	{ PCI_VDEVICE(AMD, 0x7900), board_ahci }, /* AMD CZ */
 	/* AMD is using RAID class only for ahci controllers */
 	{ PCI_VENDOR_ID_AMD, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
 	  PCI_CLASS_STORAGE_RAID << 8, 0xffffff, board_ahci },
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 0e92326..7a949af 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -360,6 +360,8 @@ static const struct pci_device_id piix_pci_tbl[] = {
 	/* SATA Controller IDE (BayTrail) */
 	{ 0x8086, 0x0F20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata_byt },
 	{ 0x8086, 0x0F21, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata_byt },
+	/* SATA Controller IDE (Coleto Creek) */
+	{ 0x8086, 0x23a6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
 
 	{ }	/* terminate list */
 };
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index 3c92dbd..60def03 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -1541,8 +1541,7 @@ static void ahci_error_intr(struct ata_port *ap, u32 irq_stat)
 		u32 fbs = readl(port_mmio + PORT_FBS);
 		int pmp = fbs >> PORT_FBS_DWE_OFFSET;
 
-		if ((fbs & PORT_FBS_SDE) && (pmp < ap->nr_pmp_links) &&
-		    ata_link_online(&ap->pmp_link[pmp])) {
+		if ((fbs & PORT_FBS_SDE) && (pmp < ap->nr_pmp_links)) {
 			link = &ap->pmp_link[pmp];
 			fbs_need_dec = true;
 		}
diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c
index 21b80c5..f63a588 100644
--- a/drivers/ata/libata-pmp.c
+++ b/drivers/ata/libata-pmp.c
@@ -389,9 +389,13 @@ static void sata_pmp_quirks(struct ata_port *ap)
 			/* link reports offline after LPM */
 			link->flags |= ATA_LFLAG_NO_LPM;
 
-			/* Class code report is unreliable. */
+			/*
+			 * Class code report is unreliable and SRST times
+			 * out under certain configurations.
+			 */
 			if (link->pmp < 5)
-				link->flags |= ATA_LFLAG_ASSUME_ATA;
+				link->flags |= ATA_LFLAG_NO_SRST |
+					       ATA_LFLAG_ASSUME_ATA;
 
 			/* port 5 is for SEMB device and it doesn't like SRST */
 			if (link->pmp == 5)
@@ -399,20 +403,17 @@ static void sata_pmp_quirks(struct ata_port *ap)
 					       ATA_LFLAG_ASSUME_SEMB;
 		}
 	} else if (vendor == 0x1095 && devid == 0x4723) {
-		/* sil4723 quirks */
-		ata_for_each_link(link, ap, EDGE) {
-			/* link reports offline after LPM */
-			link->flags |= ATA_LFLAG_NO_LPM;
-
-			/* class code report is unreliable */
-			if (link->pmp < 2)
-				link->flags |= ATA_LFLAG_ASSUME_ATA;
-
-			/* the config device at port 2 locks up on SRST */
-			if (link->pmp == 2)
-				link->flags |= ATA_LFLAG_NO_SRST |
-					       ATA_LFLAG_ASSUME_ATA;
-		}
+		/*
+		 * sil4723 quirks
+		 *
+		 * Link reports offline after LPM.  Class code report is
+		 * unreliable.  SIMG PMPs never got SRST reliable and the
+		 * config device at port 2 locks up on SRST.
+		 */
+		ata_for_each_link(link, ap, EDGE)
+			link->flags |= ATA_LFLAG_NO_LPM |
+				       ATA_LFLAG_NO_SRST |
+				       ATA_LFLAG_ASSUME_ATA;
 	} else if (vendor == 0x1095 && devid == 0x4726) {
 		/* sil4726 quirks */
 		ata_for_each_link(link, ap, EDGE) {
diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
index 40a0fcb..5fb6885 100644
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -598,8 +598,10 @@ static int __nbd_ioctl(struct block_device *bdev, struct nbd_device *lo,
 		if (!lo->sock)
 			return -EINVAL;
 
+		lo->disconnect = 1;
+
 		nbd_send_req(lo, &sreq);
-                return 0;
+		return 0;
 	}
  
 	case NBD_CLEAR_SOCK: {
@@ -629,6 +631,7 @@ static int __nbd_ioctl(struct block_device *bdev, struct nbd_device *lo,
 				lo->sock = SOCKET_I(inode);
 				if (max_part > 0)
 					bdev->bd_invalidated = 1;
+				lo->disconnect = 0; /* we're connected now */
 				return 0;
 			} else {
 				fput(file);
@@ -675,7 +678,8 @@ static int __nbd_ioctl(struct block_device *bdev, struct nbd_device *lo,
 
 		mutex_unlock(&lo->tx_lock);
 
-		thread = kthread_create(nbd_thread, lo, lo->disk->disk_name);
+		thread = kthread_create(nbd_thread, lo, "%s",
+					lo->disk->disk_name);
 		if (IS_ERR(thread)) {
 			mutex_lock(&lo->tx_lock);
 			return PTR_ERR(thread);
@@ -700,6 +704,8 @@ static int __nbd_ioctl(struct block_device *bdev, struct nbd_device *lo,
 		set_capacity(lo->disk, 0);
 		if (max_part > 0)
 			ioctl_by_bdev(bdev, BLKRRPART, 0);
+		if (lo->disconnect) /* user requested, ignore socket errors */
+			return 0;
 		return lo->harderror;
 	}
 
diff --git a/drivers/cdrom/cdrom.c b/drivers/cdrom/cdrom.c
index 2678b6f..1331740 100644
--- a/drivers/cdrom/cdrom.c
+++ b/drivers/cdrom/cdrom.c
@@ -2885,7 +2885,7 @@ static noinline int mmc_ioctl_cdrom_read_data(struct cdrom_device_info *cdi,
 	if (lba < 0)
 		return -EINVAL;
 
-	cgc->buffer = kmalloc(blocksize, GFP_KERNEL);
+	cgc->buffer = kzalloc(blocksize, GFP_KERNEL);
 	if (cgc->buffer == NULL)
 		return -ENOMEM;
 
diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
index e8eedb7..720cace 100644
--- a/drivers/dma/pl330.c
+++ b/drivers/dma/pl330.c
@@ -349,10 +349,10 @@ static void pl330_free_chan_resources(struct dma_chan *chan)
 	struct dma_pl330_chan *pch = to_pchan(chan);
 	unsigned long flags;
 
-	spin_lock_irqsave(&pch->lock, flags);
-
 	tasklet_kill(&pch->task);
 
+	spin_lock_irqsave(&pch->lock, flags);
+
 	pl330_release_channel(pch->pl330_chid);
 	pch->pl330_chid = NULL;
 
diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c
index 2da7335..cea2625 100644
--- a/drivers/hid/hid-apple.c
+++ b/drivers/hid/hid-apple.c
@@ -523,6 +523,18 @@ static const struct hid_device_id apple_devices[] = {
 		.driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_JIS),
 		.driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI),
+		.driver_data = APPLE_HAS_FN },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO),
+		.driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS),
+		.driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING8_ANSI),
+		.driver_data = APPLE_HAS_FN },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING8_ISO),
+		.driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING8_JIS),
+		.driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI),
 		.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO),
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 611aafc..3296111 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1383,6 +1383,12 @@ static const struct hid_device_id hid_have_special_driver[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ISO) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_JIS) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING8_ANSI) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING8_ISO) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING8_JIS) },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI) },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO) },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS) },
@@ -1989,6 +1995,12 @@ static const struct hid_device_id hid_mouse_ignore_list[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ISO) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_JIS) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING8_ANSI) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING8_ISO) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING8_JIS) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) },
 	{ }
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 08075f2..a7d5256 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -119,6 +119,9 @@
 #define USB_DEVICE_ID_APPLE_WELLSPRING5A_ANSI	0x0252
 #define USB_DEVICE_ID_APPLE_WELLSPRING5A_ISO	0x0253
 #define USB_DEVICE_ID_APPLE_WELLSPRING5A_JIS	0x0254
+#define USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI	0x0259
+#define USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO	0x025a
+#define USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS	0x025b
 #define USB_DEVICE_ID_APPLE_WELLSPRING6A_ANSI	0x0249
 #define USB_DEVICE_ID_APPLE_WELLSPRING6A_ISO	0x024a
 #define USB_DEVICE_ID_APPLE_WELLSPRING6A_JIS	0x024b
@@ -133,6 +136,9 @@
 #define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS   0x023b
 #define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2011_ANSI  0x0255
 #define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2011_ISO   0x0256
+#define USB_DEVICE_ID_APPLE_WELLSPRING8_ANSI	0x0291
+#define USB_DEVICE_ID_APPLE_WELLSPRING8_ISO	0x0292
+#define USB_DEVICE_ID_APPLE_WELLSPRING8_JIS	0x0293
 #define USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY	0x030a
 #define USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY	0x030b
 #define USB_DEVICE_ID_APPLE_ATV_IRCONTROL	0x8241
diff --git a/drivers/hv/ring_buffer.c b/drivers/hv/ring_buffer.c
index 8af25a0..810658e 100644
--- a/drivers/hv/ring_buffer.c
+++ b/drivers/hv/ring_buffer.c
@@ -383,7 +383,7 @@ int hv_ringbuffer_write(struct hv_ring_buffer_info *outring_info,
 					     sizeof(u64));
 
 	/* Make sure we flush all writes before updating the writeIndex */
-	smp_wmb();
+	wmb();
 
 	/* Now, update the write location */
 	hv_set_next_write_location(outring_info, next_write_location);
diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c
index d2d0a2a..44442d5 100644
--- a/drivers/hv/vmbus_drv.c
+++ b/drivers/hv/vmbus_drv.c
@@ -466,7 +466,7 @@ static void vmbus_on_msg_dpc(unsigned long data)
 		 * will not deliver any more messages since there is
 		 * no empty slot
 		 */
-		smp_mb();
+		mb();
 
 		if (msg->header.message_flags.msg_pending) {
 			/*
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 60f593c..dbd4fa5 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -137,6 +137,7 @@ config I2C_PIIX4
 	    ATI SB700
 	    ATI SB800
 	    AMD Hudson-2
+	    AMD CZ
 	    Serverworks OSB4
 	    Serverworks CSB5
 	    Serverworks CSB6
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index 6d14ac2..14b588c 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -22,7 +22,7 @@
 	Intel PIIX4, 440MX
 	Serverworks OSB4, CSB5, CSB6, HT-1000, HT-1100
 	ATI IXP200, IXP300, IXP400, SB600, SB700, SB800
-	AMD Hudson-2
+	AMD Hudson-2, CZ
 	SMSC Victory66
 
    Note: we assume there can only be one device, with one SMBus interface.
@@ -481,6 +481,7 @@ static const struct pci_device_id piix4_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x790b) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS,
 		     PCI_DEVICE_ID_SERVERWORKS_OSB4) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS,
diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c
index 1512bd8..016bdeb 100644
--- a/drivers/input/mouse/bcm5974.c
+++ b/drivers/input/mouse/bcm5974.c
@@ -83,6 +83,14 @@
 #define USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI	0x0262
 #define USB_DEVICE_ID_APPLE_WELLSPRING7_ISO	0x0263
 #define USB_DEVICE_ID_APPLE_WELLSPRING7_JIS	0x0264
+/* MacbookPro10,2 (unibody, October 2012) */
+#define USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI	0x0259
+#define USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO	0x025a
+#define USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS	0x025b
+/* MacbookAir6,2 (unibody, June 2013) */
+#define USB_DEVICE_ID_APPLE_WELLSPRING8_ANSI	0x0291
+#define USB_DEVICE_ID_APPLE_WELLSPRING8_ISO	0x0292
+#define USB_DEVICE_ID_APPLE_WELLSPRING8_JIS	0x0293
 
 #define BCM5974_DEVICE(prod) {					\
 	.match_flags = (USB_DEVICE_ID_MATCH_DEVICE |		\
@@ -136,6 +144,14 @@ static const struct usb_device_id bcm5974_table[] = {
 	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI),
 	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7_ISO),
 	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7_JIS),
+	/* MacbookPro10,2 */
+	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI),
+	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO),
+	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS),
+	/* MacbookAir6,2 */
+	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING8_ANSI),
+	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING8_ISO),
+	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING8_JIS),
 	/* Terminating entry */
 	{}
 };
@@ -163,15 +179,18 @@ struct bt_data {
 /* trackpad header types */
 enum tp_type {
 	TYPE1,			/* plain trackpad */
-	TYPE2			/* button integrated in trackpad */
+	TYPE2,			/* button integrated in trackpad */
+	TYPE3			/* additional header fields since June 2013 */
 };
 
 /* trackpad finger data offsets, le16-aligned */
 #define FINGER_TYPE1		(13 * sizeof(__le16))
 #define FINGER_TYPE2		(15 * sizeof(__le16))
+#define FINGER_TYPE3		(19 * sizeof(__le16))
 
 /* trackpad button data offsets */
 #define BUTTON_TYPE2		15
+#define BUTTON_TYPE3		23
 
 /* list of device capability bits */
 #define HAS_INTEGRATED_BUTTON	1
@@ -374,6 +393,30 @@ static const struct bcm5974_config bcm5974_config_table[] = {
 		{ DIM_X, DIM_X / SN_COORD, -4750, 5280 },
 		{ DIM_Y, DIM_Y / SN_COORD, -150, 6730 }
 	},
+	{
+		USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI,
+		USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO,
+		USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS,
+		HAS_INTEGRATED_BUTTON,
+		0x84, sizeof(struct bt_data),
+		0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS,
+		{ DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 300 },
+		{ DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 },
+		{ DIM_X, DIM_X / SN_COORD, -4750, 5280 },
+		{ DIM_Y, DIM_Y / SN_COORD, -150, 6730 }
+	},
+	{
+		USB_DEVICE_ID_APPLE_WELLSPRING8_ANSI,
+		USB_DEVICE_ID_APPLE_WELLSPRING8_ISO,
+		USB_DEVICE_ID_APPLE_WELLSPRING8_JIS,
+		HAS_INTEGRATED_BUTTON,
+		0, sizeof(struct bt_data),
+		0x83, TYPE3, FINGER_TYPE3, FINGER_TYPE3 + SIZEOF_ALL_FINGERS,
+		{ DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 300 },
+		{ DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 },
+		{ DIM_X, DIM_X / SN_COORD, -4620, 5140 },
+		{ DIM_Y, DIM_Y / SN_COORD, -150, 6600 },
+	},
 	{}
 };
 
@@ -584,6 +627,9 @@ static int report_tp_state(struct bcm5974 *dev, int size)
 	if (c->tp_type == TYPE2)
 		input_report_key(input, BTN_LEFT, ibt);
 
+	if (c->tp_type == TYPE3)
+		input_report_key(input, BTN_LEFT, dev->tp_data[BUTTON_TYPE3]);
+
 	input_sync(input);
 
 	return 0;
@@ -599,9 +645,14 @@ static int report_tp_state(struct bcm5974 *dev, int size)
 
 static int bcm5974_wellspring_mode(struct bcm5974 *dev, bool on)
 {
-	char *data = kmalloc(8, GFP_KERNEL);
 	int retval = 0, size;
+	char *data;
+
+	/* Type 3 does not require a mode switch */
+	if (dev->cfg.tp_type == TYPE3)
+		return 0;
 
+	data = kmalloc(8, GFP_KERNEL);
 	if (!data) {
 		err("bcm5974: out of memory");
 		retval = -ENOMEM;
diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c
index 07cb1a6..6cc8e67 100644
--- a/drivers/iommu/amd_iommu.c
+++ b/drivers/iommu/amd_iommu.c
@@ -1076,6 +1076,10 @@ static unsigned long iommu_unmap_page(struct protection_domain *dom,
 
 			/* Large PTE found which maps this address */
 			unmap_size = PTE_PAGE_SIZE(*pte);
+
+			/* Only unmap from the first pte in the page */
+			if ((unmap_size - 1) & bus_addr)
+				break;
 			count      = PAGE_SIZE_PTE_COUNT(unmap_size);
 			for (i = 0; i < count; i++)
 				pte[i] = 0ULL;
@@ -1085,7 +1089,7 @@ static unsigned long iommu_unmap_page(struct protection_domain *dom,
 		unmapped += unmap_size;
 	}
 
-	BUG_ON(!is_power_of_2(unmapped));
+	BUG_ON(unmapped && !is_power_of_2(unmapped));
 
 	return unmapped;
 }
diff --git a/drivers/media/dvb/dvb-core/dmxdev.c b/drivers/media/dvb/dvb-core/dmxdev.c
index e4b5c03..4f8c3f7 100644
--- a/drivers/media/dvb/dvb-core/dmxdev.c
+++ b/drivers/media/dvb/dvb-core/dmxdev.c
@@ -380,10 +380,8 @@ static int dvb_dmxdev_section_callback(const u8 *buffer1, size_t buffer1_len,
 		ret = dvb_dmxdev_buffer_write(&dmxdevfilter->buffer, buffer2,
 					      buffer2_len);
 	}
-	if (ret < 0) {
-		dvb_ringbuffer_flush(&dmxdevfilter->buffer);
+	if (ret < 0)
 		dmxdevfilter->buffer.error = ret;
-	}
 	if (dmxdevfilter->params.sec.flags & DMX_ONESHOT)
 		dmxdevfilter->state = DMXDEV_STATE_DONE;
 	spin_unlock(&dmxdevfilter->dev->lock);
@@ -419,10 +417,8 @@ static int dvb_dmxdev_ts_callback(const u8 *buffer1, size_t buffer1_len,
 	ret = dvb_dmxdev_buffer_write(buffer, buffer1, buffer1_len);
 	if (ret == buffer1_len)
 		ret = dvb_dmxdev_buffer_write(buffer, buffer2, buffer2_len);
-	if (ret < 0) {
-		dvb_ringbuffer_flush(buffer);
+	if (ret < 0)
 		buffer->error = ret;
-	}
 	spin_unlock(&dmxdevfilter->dev->lock);
 	wake_up(&buffer->queue);
 	return 0;
diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index 1bc927a..efb5ae1 100644
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -688,6 +688,9 @@ static int tg3_ape_lock(struct tg3 *tp, int locknum)
 		status = tg3_ape_read32(tp, gnt + off);
 		if (status == bit)
 			break;
+		if (pci_channel_offline(tp->pdev))
+			break;
+
 		udelay(10);
 	}
 
@@ -1465,6 +1468,9 @@ static void tg3_wait_for_event_ack(struct tg3 *tp)
 	for (i = 0; i < delay_cnt; i++) {
 		if (!(tr32(GRC_RX_CPU_EVENT) & GRC_RX_CPU_DRIVER_EVENT))
 			break;
+		if (pci_channel_offline(tp->pdev))
+			break;
+
 		udelay(8);
 	}
 }
@@ -1628,6 +1634,9 @@ static int tg3_poll_fw(struct tg3 *tp)
 		for (i = 0; i < 200; i++) {
 			if (tr32(VCPU_STATUS) & VCPU_STATUS_INIT_DONE)
 				return 0;
+			if (pci_channel_offline(tp->pdev))
+				return -ENODEV;
+
 			udelay(100);
 		}
 		return -ENODEV;
@@ -1638,6 +1647,15 @@ static int tg3_poll_fw(struct tg3 *tp)
 		tg3_read_mem(tp, NIC_SRAM_FIRMWARE_MBOX, &val);
 		if (val == ~NIC_SRAM_FIRMWARE_MBOX_MAGIC1)
 			break;
+		if (pci_channel_offline(tp->pdev)) {
+			if (!tg3_flag(tp, NO_FWARE_REPORTED)) {
+				tg3_flag_set(tp, NO_FWARE_REPORTED);
+				netdev_info(tp->dev, "No firmware running\n");
+			}
+
+			break;
+		}
+
 		udelay(10);
 	}
 
@@ -3067,6 +3085,10 @@ static int tg3_halt_cpu(struct tg3 *tp, u32 offset)
 			tw32(offset + CPU_MODE,  CPU_MODE_HALT);
 			if (tr32(offset + CPU_MODE) & CPU_MODE_HALT)
 				break;
+			if (pci_channel_offline(tp->pdev))
+				return -EBUSY;
+			if (pci_channel_offline(tp->pdev))
+				return -EBUSY;
 		}
 
 		tw32(offset + CPU_STATE, 0xffffffff);
@@ -7569,6 +7591,14 @@ static int tg3_stop_block(struct tg3 *tp, unsigned long ofs, u32 enable_bit, int
 	tw32_f(ofs, val);
 
 	for (i = 0; i < MAX_WAIT_CNT; i++) {
+		if (pci_channel_offline(tp->pdev)) {
+			dev_err(&tp->pdev->dev,
+				"tg3_stop_block device offline, "
+				"ofs=%lx enable_bit=%x\n",
+				ofs, enable_bit);
+			return -ENODEV;
+		}
+
 		udelay(100);
 		val = tr32(ofs);
 		if ((val & enable_bit) == 0)
@@ -7592,6 +7622,13 @@ static int tg3_abort_hw(struct tg3 *tp, int silent)
 
 	tg3_disable_ints(tp);
 
+	if (pci_channel_offline(tp->pdev)) {
+		tp->rx_mode &= ~(RX_MODE_ENABLE | TX_MODE_ENABLE);
+		tp->mac_mode &= ~MAC_MODE_TDE_ENABLE;
+		err = -ENODEV;
+		goto err_no_dev;
+	}
+
 	tp->rx_mode &= ~RX_MODE_ENABLE;
 	tw32_f(MAC_RX_MODE, tp->rx_mode);
 	udelay(10);
@@ -7640,6 +7677,7 @@ static int tg3_abort_hw(struct tg3 *tp, int silent)
 	err |= tg3_stop_block(tp, BUFMGR_MODE, BUFMGR_MODE_ENABLE, silent);
 	err |= tg3_stop_block(tp, MEMARB_MODE, MEMARB_MODE_ENABLE, silent);
 
+err_no_dev:
 	for (i = 0; i < tp->irq_cnt; i++) {
 		struct tg3_napi *tnapi = &tp->napi[i];
 		if (tnapi->hw_status)
diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c
index ed7a5a6..a3bd0ba 100644
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -5584,14 +5584,6 @@ static netdev_tx_t rtl8169_start_xmit(struct sk_buff *skb,
 		goto err_stop_0;
 	}
 
-	/* 8168evl does not automatically pad to minimum length. */
-	if (unlikely(tp->mac_version == RTL_GIGA_MAC_VER_34 &&
-		     skb->len < ETH_ZLEN)) {
-		if (skb_padto(skb, ETH_ZLEN))
-			goto err_update_stats;
-		skb_put(skb, ETH_ZLEN - skb->len);
-	}
-
 	if (unlikely(le32_to_cpu(txd->opts1) & DescOwn))
 		goto err_stop_0;
 
diff --git a/drivers/net/wan/dlci.c b/drivers/net/wan/dlci.c
index 48ab38a..02c939e 100644
--- a/drivers/net/wan/dlci.c
+++ b/drivers/net/wan/dlci.c
@@ -385,21 +385,37 @@ static int dlci_del(struct dlci_add *dlci)
 	struct frad_local	*flp;
 	struct net_device	*master, *slave;
 	int			err;
+	bool			found = false;
+
+	rtnl_lock();
 
 	/* validate slave device */
 	master = __dev_get_by_name(&init_net, dlci->devname);
-	if (!master)
-		return -ENODEV;
+	if (!master) {
+		err = -ENODEV;
+		goto out;
+	}
+
+	list_for_each_entry(dlp, &dlci_devs, list) {
+		if (dlp->master == master) {
+			found = true;
+			break;
+		}
+	}
+	if (!found) {
+		err = -ENODEV;
+		goto out;
+	}
 
 	if (netif_running(master)) {
-		return -EBUSY;
+		err = -EBUSY;
+		goto out;
 	}
 
 	dlp = netdev_priv(master);
 	slave = dlp->slave;
 	flp = netdev_priv(slave);
 
-	rtnl_lock();
 	err = (*flp->deassoc)(slave, master);
 	if (!err) {
 		list_del(&dlp->list);
@@ -408,8 +424,8 @@ static int dlci_del(struct dlci_add *dlci)
 
 		dev_put(slave);
 	}
+out:
 	rtnl_unlock();
-
 	return err;
 }
 
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
index 3b262ba..c41eb9d 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -3625,7 +3625,7 @@ static u16 ar9003_hw_ant_ctrl_chain_get(struct ath_hw *ah,
 static void ar9003_hw_ant_ctrl_apply(struct ath_hw *ah, bool is2ghz)
 {
 	int chain;
-	u32 regval;
+	u32 regval, value;
 	u32 ant_div_ctl1;
 	static const u32 switch_chain_reg[AR9300_MAX_CHAINS] = {
 			AR_PHY_SWITCH_CHAIN_0,
@@ -3633,7 +3633,11 @@ static void ar9003_hw_ant_ctrl_apply(struct ath_hw *ah, bool is2ghz)
 			AR_PHY_SWITCH_CHAIN_2,
 	};
 
-	u32 value = ar9003_hw_ant_ctrl_common_get(ah, is2ghz);
+	if (AR_SREV_9485(ah) && (ar9003_hw_get_rx_gain_idx(ah) == 0))
+		ath9k_hw_cfg_output(ah, AR9300_EXT_LNA_CTL_GPIO_AR9485,
+				    AR_GPIO_OUTPUT_MUX_AS_PCIE_ATTENTION_LED);
+
+	value = ar9003_hw_ant_ctrl_common_get(ah, is2ghz);
 
 	if (AR_SREV_9462(ah)) {
 		if (AR_SREV_9462_10(ah)) {
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.h b/drivers/net/wireless/ath/ath9k/ar9003_phy.h
index 4114fe7..4e9b71b 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.h
@@ -334,6 +334,8 @@
 
 #define AR_PHY_CCA_NOM_VAL_9330_2GHZ          -118
 
+#define AR9300_EXT_LNA_CTL_GPIO_AR9485 9
+
 /*
  * AGC Field Definitions
  */
diff --git a/drivers/net/wireless/ath/ath9k/calib.c b/drivers/net/wireless/ath/ath9k/calib.c
index bcabfbf..5e522e4 100644
--- a/drivers/net/wireless/ath/ath9k/calib.c
+++ b/drivers/net/wireless/ath/ath9k/calib.c
@@ -391,7 +391,6 @@ bool ath9k_hw_getnf(struct ath_hw *ah, struct ath9k_channel *chan)
 
 	if (!caldata) {
 		chan->noisefloor = nf;
-		ah->noise = ath9k_hw_getchan_noise(ah, chan);
 		return false;
 	}
 
@@ -413,6 +412,7 @@ void ath9k_init_nfcal_hist_buffer(struct ath_hw *ah,
 
 	ah->caldata->channel = chan->channel;
 	ah->caldata->channelFlags = chan->channelFlags & ~CHANNEL_CW_INT;
+	ah->caldata->chanmode = chan->chanmode;
 	h = ah->caldata->nfCalHist;
 	default_nf = ath9k_hw_get_default_nf(ah, chan);
 	for (i = 0; i < NUM_NF_READINGS; i++) {
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 2b8e957..c623527 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -1540,7 +1540,8 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 	if (caldata &&
 	    (chan->channel != caldata->channel ||
 	     (chan->channelFlags & ~CHANNEL_CW_INT) !=
-	     (caldata->channelFlags & ~CHANNEL_CW_INT))) {
+	     (caldata->channelFlags & ~CHANNEL_CW_INT) ||
+	     chan->chanmode != caldata->chanmode)) {
 		/* Operating channel changed, reset channel calibration data */
 		memset(caldata, 0, sizeof(*caldata));
 		ath9k_init_nfcal_hist_buffer(ah, chan);
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index 0c65a09..dc774cd 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -352,6 +352,7 @@ struct ath9k_rtt_hist {
 struct ath9k_hw_cal_data {
 	u16 channel;
 	u32 channelFlags;
+	u32 chanmode;
 	int32_t CalValid;
 	int8_t iCoff;
 	int8_t qCoff;
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index df3e27c..a59267a 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1688,13 +1688,6 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
 		ath_update_survey_stats(sc);
 		spin_unlock_irqrestore(&common->cc_lock, flags);
 
-		/*
-		 * Preserve the current channel values, before updating
-		 * the same channel
-		 */
-		if (ah->curchan && (old_pos == pos))
-			ath9k_hw_getnf(ah, ah->curchan);
-
 		ath9k_cmn_update_ichannel(&sc->sc_ah->channels[pos],
 					  curchan, conf->channel_type);
 
diff --git a/drivers/net/wireless/b43/Kconfig b/drivers/net/wireless/b43/Kconfig
index b97a40e..36a7ce3 100644
--- a/drivers/net/wireless/b43/Kconfig
+++ b/drivers/net/wireless/b43/Kconfig
@@ -28,12 +28,12 @@ config B43
 
 config B43_BCMA
 	bool "Support for BCMA bus"
-	depends on B43 && BCMA
+	depends on B43 && (BCMA = y || BCMA = B43)
 	default y
 
 config B43_SSB
 	bool
-	depends on B43 && SSB
+	depends on B43 && (SSB = y || SSB = B43)
 	default y
 
 # Auto-select SSB PCI-HOST support, if possible
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/rf.c b/drivers/net/wireless/rtlwifi/rtl8192cu/rf.c
index 1e851aa..17a8e96 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/rf.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/rf.c
@@ -104,7 +104,7 @@ void rtl92cu_phy_rf6052_set_cck_txpower(struct ieee80211_hw *hw,
 			tx_agc[RF90_PATH_A] = 0x10101010;
 			tx_agc[RF90_PATH_B] = 0x10101010;
 		} else if (rtlpriv->dm.dynamic_txhighpower_lvl ==
-			   TXHIGHPWRLEVEL_LEVEL1) {
+			   TXHIGHPWRLEVEL_LEVEL2) {
 			tx_agc[RF90_PATH_A] = 0x00000000;
 			tx_agc[RF90_PATH_B] = 0x00000000;
 		} else{
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
index 0984dcf..016ef86 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
@@ -367,6 +367,7 @@ static struct usb_device_id rtl8192c_usb_ids[] = {
 	{RTL_USB_DEVICE(0x2001, 0x330a, rtl92cu_hal_cfg)}, /*D-Link-Alpha*/
 	{RTL_USB_DEVICE(0x2019, 0xab2b, rtl92cu_hal_cfg)}, /*Planex -Abocom*/
 	{RTL_USB_DEVICE(0x20f4, 0x624d, rtl92cu_hal_cfg)}, /*TRENDNet*/
+	{RTL_USB_DEVICE(0x2357, 0x0100, rtl92cu_hal_cfg)}, /*TP-Link WN8200ND*/
 	{RTL_USB_DEVICE(0x7392, 0x7822, rtl92cu_hal_cfg)}, /*Edimax -Edimax*/
 	{}
 };
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index cab24f7..f0c8c5d 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1123,6 +1123,8 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk
 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_amd_ide_mode);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE, quirk_amd_ide_mode);
 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE, quirk_amd_ide_mode);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x7900, quirk_amd_ide_mode);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, 0x7900, quirk_amd_ide_mode);
 
 /*
  *	Serverworks CSB5 IDE does not fully support native mode
diff --git a/drivers/rtc/rtc-rv3029c2.c b/drivers/rtc/rtc-rv3029c2.c
index ea09ff2..5317d94 100644
--- a/drivers/rtc/rtc-rv3029c2.c
+++ b/drivers/rtc/rtc-rv3029c2.c
@@ -310,7 +310,7 @@ static int rv3029c2_rtc_i2c_set_alarm(struct i2c_client *client,
 		dev_dbg(&client->dev, "alarm IRQ armed\n");
 	} else {
 		/* disable AIE irq */
-		ret = rv3029c2_rtc_i2c_alarm_set_irq(client, 1);
+		ret = rv3029c2_rtc_i2c_alarm_set_irq(client, 0);
 		if (ret)
 			return ret;
 
diff --git a/drivers/s390/scsi/zfcp_aux.c b/drivers/s390/scsi/zfcp_aux.c
index 4f1b10b..3743ac9 100644
--- a/drivers/s390/scsi/zfcp_aux.c
+++ b/drivers/s390/scsi/zfcp_aux.c
@@ -3,7 +3,7 @@
  *
  * Module interface and handling of zfcp data structures.
  *
- * Copyright IBM Corporation 2002, 2010
+ * Copyright IBM Corp. 2002, 2013
  */
 
 /*
@@ -23,6 +23,7 @@
  *            Christof Schmitt
  *            Martin Petermann
  *            Sven Schuetz
+ *            Steffen Maier
  */
 
 #define KMSG_COMPONENT "zfcp"
@@ -415,6 +416,8 @@ struct zfcp_adapter *zfcp_adapter_enqueue(struct ccw_device *ccw_device)
 	adapter->dma_parms.max_segment_size = ZFCP_QDIO_SBALE_LEN;
 	adapter->ccw_device->dev.dma_parms = &adapter->dma_parms;
 
+	adapter->stat_read_buf_num = FSF_STATUS_READS_RECOM;
+
 	if (!zfcp_scsi_adapter_register(adapter))
 		return adapter;
 
diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c
index 8c849f0..8bfd579 100644
--- a/drivers/s390/scsi/zfcp_fsf.c
+++ b/drivers/s390/scsi/zfcp_fsf.c
@@ -3,7 +3,7 @@
  *
  * Implementation of FSF commands.
  *
- * Copyright IBM Corporation 2002, 2010
+ * Copyright IBM Corp. 2002, 2013
  */
 
 #define KMSG_COMPONENT "zfcp"
@@ -455,11 +455,8 @@ static int zfcp_fsf_exchange_config_evaluate(struct zfcp_fsf_req *req)
 
 	fc_host_port_name(shost) = nsp->fl_wwpn;
 	fc_host_node_name(shost) = nsp->fl_wwnn;
-	fc_host_port_id(shost) = ntoh24(bottom->s_id);
-	fc_host_speed(shost) = bottom->fc_link_speed;
 	fc_host_supported_classes(shost) = FC_COS_CLASS2 | FC_COS_CLASS3;
 
-	adapter->hydra_version = bottom->adapter_type;
 	adapter->timer_ticks = bottom->timer_interval & ZFCP_FSF_TIMER_INT_MASK;
 	adapter->stat_read_buf_num = max(bottom->status_read_buf_num,
 					 (u16)FSF_STATUS_READS_RECOM);
@@ -467,6 +464,18 @@ static int zfcp_fsf_exchange_config_evaluate(struct zfcp_fsf_req *req)
 	if (fc_host_permanent_port_name(shost) == -1)
 		fc_host_permanent_port_name(shost) = fc_host_port_name(shost);
 
+	zfcp_scsi_set_prot(adapter);
+
+	/* no error return above here, otherwise must fix call chains */
+	/* do not evaluate invalid fields */
+	if (req->qtcb->header.fsf_status == FSF_EXCHANGE_CONFIG_DATA_INCOMPLETE)
+		return 0;
+
+	fc_host_port_id(shost) = ntoh24(bottom->s_id);
+	fc_host_speed(shost) = bottom->fc_link_speed;
+
+	adapter->hydra_version = bottom->adapter_type;
+
 	switch (bottom->fc_topology) {
 	case FSF_TOPO_P2P:
 		adapter->peer_d_id = ntoh24(bottom->peer_d_id);
@@ -488,8 +497,6 @@ static int zfcp_fsf_exchange_config_evaluate(struct zfcp_fsf_req *req)
 		return -EIO;
 	}
 
-	zfcp_scsi_set_prot(adapter);
-
 	return 0;
 }
 
@@ -534,8 +541,14 @@ static void zfcp_fsf_exchange_config_data_handler(struct zfcp_fsf_req *req)
 		fc_host_port_type(shost) = FC_PORTTYPE_UNKNOWN;
 		adapter->hydra_version = 0;
 
+		/* avoids adapter shutdown to be able to recognize
+		 * events such as LINK UP */
+		atomic_set_mask(ZFCP_STATUS_ADAPTER_XCONFIG_OK,
+				&adapter->status);
 		zfcp_fsf_link_down_info_eval(req,
 			&qtcb->header.fsf_status_qual.link_down_info);
+		if (zfcp_fsf_exchange_config_evaluate(req))
+			return;
 		break;
 	default:
 		zfcp_erp_adapter_shutdown(adapter, 0, "fsecdh3");
diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c
index b79576b..7b35364 100644
--- a/drivers/s390/scsi/zfcp_scsi.c
+++ b/drivers/s390/scsi/zfcp_scsi.c
@@ -3,7 +3,7 @@
  *
  * Interface to Linux SCSI midlayer.
  *
- * Copyright IBM Corporation 2002, 2010
+ * Copyright IBM Corp. 2002, 2013
  */
 
 #define KMSG_COMPONENT "zfcp"
@@ -311,8 +311,12 @@ static struct scsi_host_template zfcp_scsi_host_template = {
 	.proc_name		 = "zfcp",
 	.can_queue		 = 4096,
 	.this_id		 = -1,
-	.sg_tablesize		 = 1, /* adjusted later */
-	.max_sectors		 = 8, /* adjusted later */
+	.sg_tablesize		 = (((QDIO_MAX_ELEMENTS_PER_BUFFER - 1)
+				     * ZFCP_QDIO_MAX_SBALS_PER_REQ) - 2),
+				   /* GCD, adjusted later */
+	.max_sectors		 = (((QDIO_MAX_ELEMENTS_PER_BUFFER - 1)
+				     * ZFCP_QDIO_MAX_SBALS_PER_REQ) - 2) * 8,
+				   /* GCD, adjusted later */
 	.dma_boundary		 = ZFCP_QDIO_SBALE_LEN - 1,
 	.cmd_per_lun		 = 1,
 	.use_clustering		 = 1,
diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index 7c471eb..fc5a2ef 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -4886,10 +4886,12 @@ megasas_mgmt_fw_ioctl(struct megasas_instance *instance,
 				    sense, sense_handle);
 	}
 
-	for (i = 0; i < ioc->sge_count && kbuff_arr[i]; i++) {
-		dma_free_coherent(&instance->pdev->dev,
-				    kern_sge32[i].length,
-				    kbuff_arr[i], kern_sge32[i].phys_addr);
+	for (i = 0; i < ioc->sge_count; i++) {
+		if (kbuff_arr[i])
+			dma_free_coherent(&instance->pdev->dev,
+					  kern_sge32[i].length,
+					  kbuff_arr[i],
+					  kern_sge32[i].phys_addr);
 	}
 
 	megasas_return_cmd(instance, cmd);
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c
index 17de348..a11a909 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.c
@@ -79,10 +79,6 @@ static int msix_disable = -1;
 module_param(msix_disable, int, 0);
 MODULE_PARM_DESC(msix_disable, " disable msix routed interrupts (default=0)");
 
-static int missing_delay[2] = {-1, -1};
-module_param_array(missing_delay, int, NULL, 0);
-MODULE_PARM_DESC(missing_delay, " device missing delay , io missing delay");
-
 static int mpt2sas_fwfault_debug;
 MODULE_PARM_DESC(mpt2sas_fwfault_debug, " enable detection of firmware fault "
 	"and halt firmware - (default=0)");
@@ -2104,7 +2100,7 @@ _base_display_ioc_capabilities(struct MPT2SAS_ADAPTER *ioc)
 }
 
 /**
- * _base_update_missing_delay - change the missing delay timers
+ * mpt2sas_base_update_missing_delay - change the missing delay timers
  * @ioc: per adapter object
  * @device_missing_delay: amount of time till device is reported missing
  * @io_missing_delay: interval IO is returned when there is a missing device
@@ -2115,8 +2111,8 @@ _base_display_ioc_capabilities(struct MPT2SAS_ADAPTER *ioc)
  * delay, as well as the io missing delay. This should be called at driver
  * load time.
  */
-static void
-_base_update_missing_delay(struct MPT2SAS_ADAPTER *ioc,
+void
+mpt2sas_base_update_missing_delay(struct MPT2SAS_ADAPTER *ioc,
 	u16 device_missing_delay, u8 io_missing_delay)
 {
 	u16 dmd, dmd_new, dmd_orignal;
@@ -4302,9 +4298,6 @@ mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc)
 	if (r)
 		goto out_free_resources;
 
-	if (missing_delay[0] != -1 && missing_delay[1] != -1)
-		_base_update_missing_delay(ioc, missing_delay[0],
-		    missing_delay[1]);
 
 	return 0;
 
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h
index 3c3babc..aa4daf6 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.h
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.h
@@ -1029,6 +1029,9 @@ void mpt2sas_base_validate_event_type(struct MPT2SAS_ADAPTER *ioc, u32 *event_ty
 
 void mpt2sas_halt_firmware(struct MPT2SAS_ADAPTER *ioc);
 
+void mpt2sas_base_update_missing_delay(struct MPT2SAS_ADAPTER *ioc,
+	u16 device_missing_delay, u8 io_missing_delay);
+
 int mpt2sas_port_enable(struct MPT2SAS_ADAPTER *ioc);
 
 /* scsih shared API */
diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index 2824a90..987c6d6 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -101,6 +101,10 @@ static ushort max_sectors = 0xFFFF;
 module_param(max_sectors, ushort, 0);
 MODULE_PARM_DESC(max_sectors, "max sectors, range 64 to 8192  default=8192");
 
+static int missing_delay[2] = {-1, -1};
+module_param_array(missing_delay, int, NULL, 0);
+MODULE_PARM_DESC(missing_delay, " device missing delay , io missing delay");
+
 /* scsi-mid layer global parmeter is max_report_luns, which is 511 */
 #define MPT2SAS_MAX_LUN (16895)
 static int max_lun = MPT2SAS_MAX_LUN;
@@ -3930,11 +3934,7 @@ _scsih_qcmd_lck(struct scsi_cmnd *scmd, void (*done)(struct scsi_cmnd *))
 			else
 				mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ;
 		} else
-/* MPI Revision I (UNIT = 0xA) - removed MPI2_SCSIIO_CONTROL_UNTAGGED */
-/*			mpi_control |= MPI2_SCSIIO_CONTROL_UNTAGGED;
- */
-			mpi_control |= (0x500);
-
+			mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ;
 	} else
 		mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ;
 	/* Make sure Device is not raid volume.
@@ -7006,11 +7006,14 @@ _scsih_scan_for_devices_after_reset(struct MPT2SAS_ADAPTER *ioc)
 	struct _sas_device *sas_device;
 	struct _sas_node *expander_device;
 	static struct _raid_device *raid_device;
+	u8 retry_count;
 
 	printk(MPT2SAS_INFO_FMT "scan devices: start\n", ioc->name);
 
 	_scsih_sas_host_refresh(ioc);
 
+	printk(MPT2SAS_INFO_FMT "\tscan devices: expanders start\n",
+		ioc->name);
 	/* expanders */
 	handle = 0xFFFF;
 	while (!(mpt2sas_config_get_expander_pg0(ioc, &mpi_reply, &expander_pg0,
@@ -7019,19 +7022,39 @@ _scsih_scan_for_devices_after_reset(struct MPT2SAS_ADAPTER *ioc)
 		    MPI2_IOCSTATUS_MASK;
 		if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
 			break;
+		if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+			printk(MPT2SAS_INFO_FMT "\tbreak from expander scan: "
+				"ioc_status(0x%04x), loginfo(0x%08x)\n",
+				ioc->name, ioc_status,
+				le32_to_cpu(mpi_reply.IOCLogInfo));
+			break;
+		}
 		handle = le16_to_cpu(expander_pg0.DevHandle);
 		expander_device = mpt2sas_scsih_expander_find_by_sas_address(
 		    ioc, le64_to_cpu(expander_pg0.SASAddress));
 		if (expander_device)
 			_scsih_refresh_expander_links(ioc, expander_device,
 			    handle);
-		else
+		else {
+			printk(MPT2SAS_INFO_FMT "\tBEFORE adding expander: "
+				"handle (0x%04x), sas_addr(0x%016llx)\n",
+				ioc->name, handle, (unsigned long long)
+				le64_to_cpu(expander_pg0.SASAddress));
 			_scsih_expander_add(ioc, handle);
+			printk(MPT2SAS_INFO_FMT "\tAFTER adding expander: "
+				"handle (0x%04x), sas_addr(0x%016llx)\n",
+				ioc->name, handle, (unsigned long long)
+				le64_to_cpu(expander_pg0.SASAddress));
+		}
 	}
 
+	printk(MPT2SAS_INFO_FMT "\tscan devices: expanders complete\n",
+		ioc->name);
+
 	if (!ioc->ir_firmware)
 		goto skip_to_sas;
 
+	printk(MPT2SAS_INFO_FMT "\tscan devices phys disk start\n", ioc->name);
 	/* phys disk */
 	phys_disk_num = 0xFF;
 	while (!(mpt2sas_config_get_phys_disk_pg0(ioc, &mpi_reply,
@@ -7041,6 +7064,13 @@ _scsih_scan_for_devices_after_reset(struct MPT2SAS_ADAPTER *ioc)
 		    MPI2_IOCSTATUS_MASK;
 		if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
 			break;
+		if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+			printk(MPT2SAS_INFO_FMT "\tbreak from phys disk scan:"
+				"ioc_status(0x%04x), loginfo(0x%08x)\n",
+				ioc->name, ioc_status,
+				le32_to_cpu(mpi_reply.IOCLogInfo));
+			break;
+		}
 		phys_disk_num = pd_pg0.PhysDiskNum;
 		handle = le16_to_cpu(pd_pg0.DevHandle);
 		sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
@@ -7050,17 +7080,46 @@ _scsih_scan_for_devices_after_reset(struct MPT2SAS_ADAPTER *ioc)
 		    &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE,
 		    handle) != 0)
 			continue;
+		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+			MPI2_IOCSTATUS_MASK;
+		if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+			printk(MPT2SAS_INFO_FMT "\tbreak from phys disk scan "
+				"ioc_status(0x%04x), loginfo(0x%08x)\n",
+				ioc->name, ioc_status,
+				le32_to_cpu(mpi_reply.IOCLogInfo));
+			break;
+		}
 		parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle);
 		if (!_scsih_get_sas_address(ioc, parent_handle,
 		    &sas_address)) {
+			printk(MPT2SAS_INFO_FMT "\tBEFORE adding phys disk: "
+				" handle (0x%04x), sas_addr(0x%016llx)\n",
+				ioc->name, handle, (unsigned long long)
+				le64_to_cpu(sas_device_pg0.SASAddress));
 			mpt2sas_transport_update_links(ioc, sas_address,
 			    handle, sas_device_pg0.PhyNum,
 			    MPI2_SAS_NEG_LINK_RATE_1_5);
 			set_bit(handle, ioc->pd_handles);
-			_scsih_add_device(ioc, handle, 0, 1);
+			retry_count = 0;
+			/* This will retry adding the end device.
+			* _scsih_add_device() will decide on retries and
+			* return "1" when it should be retried
+			*/
+			while (_scsih_add_device(ioc, handle, retry_count++,
+				1)) {
+					ssleep(1);
+			}
+			printk(MPT2SAS_INFO_FMT "\tAFTER adding phys disk: "
+				" handle (0x%04x), sas_addr(0x%016llx)\n",
+				ioc->name, handle, (unsigned long long)
+				le64_to_cpu(sas_device_pg0.SASAddress));
 		}
 	}
 
+	printk(MPT2SAS_INFO_FMT "\tscan devices: phys disk complete\n",
+		ioc->name);
+
+	printk(MPT2SAS_INFO_FMT "\tscan devices: volumes start\n", ioc->name);
 	/* volumes */
 	handle = 0xFFFF;
 	while (!(mpt2sas_config_get_raid_volume_pg1(ioc, &mpi_reply,
@@ -7069,6 +7128,13 @@ _scsih_scan_for_devices_after_reset(struct MPT2SAS_ADAPTER *ioc)
 		    MPI2_IOCSTATUS_MASK;
 		if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
 			break;
+		if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+			printk(MPT2SAS_INFO_FMT "\tbreak from volume scan: "
+				"ioc_status(0x%04x), loginfo(0x%08x)\n",
+				ioc->name, ioc_status,
+				le32_to_cpu(mpi_reply.IOCLogInfo));
+			break;
+		}
 		handle = le16_to_cpu(volume_pg1.DevHandle);
 		raid_device = _scsih_raid_device_find_by_wwid(ioc,
 		    le64_to_cpu(volume_pg1.WWID));
@@ -7078,18 +7144,38 @@ _scsih_scan_for_devices_after_reset(struct MPT2SAS_ADAPTER *ioc)
 		    &volume_pg0, MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, handle,
 		     sizeof(Mpi2RaidVolPage0_t)))
 			continue;
+		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+			MPI2_IOCSTATUS_MASK;
+		if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+			printk(MPT2SAS_INFO_FMT "\tbreak from volume scan: "
+				"ioc_status(0x%04x), loginfo(0x%08x)\n",
+				ioc->name, ioc_status,
+				le32_to_cpu(mpi_reply.IOCLogInfo));
+			break;
+		}
 		if (volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_OPTIMAL ||
 		    volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_ONLINE ||
 		    volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_DEGRADED) {
 			memset(&element, 0, sizeof(Mpi2EventIrConfigElement_t));
 			element.ReasonCode = MPI2_EVENT_IR_CHANGE_RC_ADDED;
 			element.VolDevHandle = volume_pg1.DevHandle;
+			printk(MPT2SAS_INFO_FMT "\tBEFORE adding volume: "
+				" handle (0x%04x)\n", ioc->name,
+				volume_pg1.DevHandle);
 			_scsih_sas_volume_add(ioc, &element);
+			printk(MPT2SAS_INFO_FMT "\tAFTER adding volume: "
+				" handle (0x%04x)\n", ioc->name,
+				volume_pg1.DevHandle);
 		}
 	}
 
+	printk(MPT2SAS_INFO_FMT "\tscan devices: volumes complete\n",
+		ioc->name);
+
  skip_to_sas:
 
+	printk(MPT2SAS_INFO_FMT "\tscan devices: end devices start\n",
+		ioc->name);
 	/* sas devices */
 	handle = 0xFFFF;
 	while (!(mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply,
@@ -7099,6 +7185,13 @@ _scsih_scan_for_devices_after_reset(struct MPT2SAS_ADAPTER *ioc)
 		    MPI2_IOCSTATUS_MASK;
 		if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
 			break;
+		if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+			printk(MPT2SAS_INFO_FMT "\tbreak from end device scan:"
+				" ioc_status(0x%04x), loginfo(0x%08x)\n",
+				ioc->name, ioc_status,
+				le32_to_cpu(mpi_reply.IOCLogInfo));
+				break;
+		}
 		handle = le16_to_cpu(sas_device_pg0.DevHandle);
 		if (!(_scsih_is_end_device(
 		    le32_to_cpu(sas_device_pg0.DeviceInfo))))
@@ -7109,12 +7202,31 @@ _scsih_scan_for_devices_after_reset(struct MPT2SAS_ADAPTER *ioc)
 			continue;
 		parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle);
 		if (!_scsih_get_sas_address(ioc, parent_handle, &sas_address)) {
+			printk(MPT2SAS_INFO_FMT "\tBEFORE adding end device: "
+				"handle (0x%04x), sas_addr(0x%016llx)\n",
+				ioc->name, handle, (unsigned long long)
+				le64_to_cpu(sas_device_pg0.SASAddress));
 			mpt2sas_transport_update_links(ioc, sas_address, handle,
 			    sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5);
-			_scsih_add_device(ioc, handle, 0, 0);
+			retry_count = 0;
+			/* This will retry adding the end device.
+			 * _scsih_add_device() will decide on retries and
+			 * return "1" when it should be retried
+			 */
+			while (_scsih_add_device(ioc, handle, retry_count++,
+				0)) {
+					ssleep(1);
+			}
+			printk(MPT2SAS_INFO_FMT "\tAFTER adding end device: "
+				"handle (0x%04x), sas_addr(0x%016llx)\n",
+				ioc->name, handle, (unsigned long long)
+				le64_to_cpu(sas_device_pg0.SASAddress));
 		}
 	}
 
+	printk(MPT2SAS_INFO_FMT "\tscan devices: end devices complete\n",
+		ioc->name);
+
 	printk(MPT2SAS_INFO_FMT "scan devices: complete\n", ioc->name);
 }
 
@@ -7206,7 +7318,9 @@ _firmware_event_work(struct work_struct *work)
 	case MPT2SAS_PORT_ENABLE_COMPLETE:
 		ioc->start_scan = 0;
 
-
+		if (missing_delay[0] != -1 && missing_delay[1] != -1)
+			mpt2sas_base_update_missing_delay(ioc, missing_delay[0],
+				missing_delay[1]);
 
 		dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "port enable: complete "
 		    "from worker thread\n", ioc->name));
diff --git a/drivers/scsi/osd/osd_uld.c b/drivers/scsi/osd/osd_uld.c
index d4ed9eb..caac1b2 100644
--- a/drivers/scsi/osd/osd_uld.c
+++ b/drivers/scsi/osd/osd_uld.c
@@ -465,7 +465,7 @@ static int osd_probe(struct device *dev)
 	oud->class_dev.class = &osd_uld_class;
 	oud->class_dev.parent = dev;
 	oud->class_dev.release = __remove;
-	error = dev_set_name(&oud->class_dev, disk->disk_name);
+	error = dev_set_name(&oud->class_dev, "%s", disk->disk_name);
 	if (error) {
 		OSD_ERR("dev_set_name failed => %d\n", error);
 		goto err_put_cdev;
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index f44d633..6dace1a 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -138,6 +138,7 @@ sd_store_cache_type(struct device *dev, struct device_attribute *attr,
 	char *buffer_data;
 	struct scsi_mode_data data;
 	struct scsi_sense_hdr sshdr;
+	static const char temp[] = "temporary ";
 	int len;
 
 	if (sdp->type != TYPE_DISK)
@@ -146,6 +147,13 @@ sd_store_cache_type(struct device *dev, struct device_attribute *attr,
 		 * it's not worth the risk */
 		return -EINVAL;
 
+	if (strncmp(buf, temp, sizeof(temp) - 1) == 0) {
+		buf += sizeof(temp) - 1;
+		sdkp->cache_override = 1;
+	} else {
+		sdkp->cache_override = 0;
+	}
+
 	for (i = 0; i < ARRAY_SIZE(sd_cache_types); i++) {
 		len = strlen(sd_cache_types[i]);
 		if (strncmp(sd_cache_types[i], buf, len) == 0 &&
@@ -158,6 +166,13 @@ sd_store_cache_type(struct device *dev, struct device_attribute *attr,
 		return -EINVAL;
 	rcd = ct & 0x01 ? 1 : 0;
 	wce = ct & 0x02 ? 1 : 0;
+
+	if (sdkp->cache_override) {
+		sdkp->WCE = wce;
+		sdkp->RCD = rcd;
+		return count;
+	}
+
 	if (scsi_mode_sense(sdp, 0x08, 8, buffer, sizeof(buffer), SD_TIMEOUT,
 			    SD_MAX_RETRIES, &data, NULL))
 		return -EINVAL;
@@ -2037,6 +2052,10 @@ sd_read_cache_type(struct scsi_disk *sdkp, unsigned char *buffer)
 	int old_rcd = sdkp->RCD;
 	int old_dpofua = sdkp->DPOFUA;
 
+
+	if (sdkp->cache_override)
+		return;
+
 	first_len = 4;
 	if (sdp->skip_ms_page_8) {
 		if (sdp->type == TYPE_RBC)
@@ -2518,6 +2537,7 @@ static void sd_probe_async(void *data, async_cookie_t cookie)
 	sdkp->capacity = 0;
 	sdkp->media_present = 1;
 	sdkp->write_prot = 0;
+	sdkp->cache_override = 0;
 	sdkp->WCE = 0;
 	sdkp->RCD = 0;
 	sdkp->ATO = 0;
diff --git a/drivers/scsi/sd.h b/drivers/scsi/sd.h
index 4163f29..e3e3cd2 100644
--- a/drivers/scsi/sd.h
+++ b/drivers/scsi/sd.h
@@ -64,6 +64,7 @@ struct scsi_disk {
 	u8		protection_type;/* Data Integrity Field */
 	u8		provisioning_mode;
 	unsigned	ATO : 1;	/* state of disk ATO bit */
+	unsigned	cache_override : 1; /* temp override of WCE,RCD */
 	unsigned	WCE : 1;	/* state of disk WCE bit */
 	unsigned	RCD : 1;	/* state of disk RCD bit, unused */
 	unsigned	DPOFUA : 1;	/* state of disk DPOFUA bit */
diff --git a/drivers/staging/zram/zram_drv.c b/drivers/staging/zram/zram_drv.c
index 2594a31..926d483 100644
--- a/drivers/staging/zram/zram_drv.c
+++ b/drivers/staging/zram/zram_drv.c
@@ -541,13 +541,20 @@ out:
  */
 static inline int valid_io_request(struct zram *zram, struct bio *bio)
 {
-	if (unlikely(
-		(bio->bi_sector >= (zram->disksize >> SECTOR_SHIFT)) ||
-		(bio->bi_sector & (ZRAM_SECTOR_PER_LOGICAL_BLOCK - 1)) ||
-		(bio->bi_size & (ZRAM_LOGICAL_BLOCK_SIZE - 1)))) {
+	u64 start, end, bound;
+	
+	/* unaligned request */
+	if (unlikely(bio->bi_sector & (ZRAM_SECTOR_PER_LOGICAL_BLOCK - 1)))
+		return 0;
+	if (unlikely(bio->bi_size & (ZRAM_LOGICAL_BLOCK_SIZE - 1)))
+		return 0;
 
+	start = bio->bi_sector;
+	end = start + (bio->bi_size >> SECTOR_SHIFT);
+	bound = zram->disksize >> SECTOR_SHIFT;
+	/* out of range range */
+	if (unlikely(start >= bound || end >= bound || start > end))
 		return 0;
-	}
 
 	/* I/O request is valid */
 	return 1;
@@ -702,7 +709,9 @@ static void zram_slot_free_notify(struct block_device *bdev,
 	struct zram *zram;
 
 	zram = bdev->bd_disk->private_data;
+	down_write(&zram->lock);
 	zram_free_page(zram, index);
+	up_write(&zram->lock);
 	zram_stat64_inc(zram, &zram->stats.notify_free);
 }
 
@@ -713,7 +722,7 @@ static const struct block_device_operations zram_devops = {
 
 static int create_device(struct zram *zram, int device_id)
 {
-	int ret = 0;
+	int ret = -ENOMEM;
 
 	init_rwsem(&zram->lock);
 	init_rwsem(&zram->init_lock);
@@ -723,7 +732,6 @@ static int create_device(struct zram *zram, int device_id)
 	if (!zram->queue) {
 		pr_err("Error allocating disk queue for device %d\n",
 			device_id);
-		ret = -ENOMEM;
 		goto out;
 	}
 
@@ -733,11 +741,9 @@ static int create_device(struct zram *zram, int device_id)
 	 /* gendisk structure */
 	zram->disk = alloc_disk(1);
 	if (!zram->disk) {
-		blk_cleanup_queue(zram->queue);
 		pr_warning("Error allocating disk structure for device %d\n",
 			device_id);
-		ret = -ENOMEM;
-		goto out;
+		goto out_free_queue;
 	}
 
 	zram->disk->major = zram_major;
@@ -766,11 +772,17 @@ static int create_device(struct zram *zram, int device_id)
 				&zram_disk_attr_group);
 	if (ret < 0) {
 		pr_warning("Error creating sysfs group");
-		goto out;
+		goto out_free_disk;
 	}
 
 	zram->init_done = 0;
+	return 0;
 
+out_free_disk:
+	del_gendisk(zram->disk);
+	put_disk(zram->disk);
+out_free_queue:
+	blk_cleanup_queue(zram->queue);
 out:
 	return ret;
 }
@@ -846,9 +858,11 @@ static void __exit zram_exit(void)
 	for (i = 0; i < zram_num_devices; i++) {
 		zram = &zram_devices[i];
 
+		get_disk(zram->disk);
 		destroy_device(zram);
 		if (zram->init_done)
 			zram_reset_device(zram);
+		put_disk(zram->disk);
 	}
 
 	unregister_blkdev(zram_major, "zram");
diff --git a/drivers/staging/zram/zram_drv.h b/drivers/staging/zram/zram_drv.h
index e5cd246..87f2fec 100644
--- a/drivers/staging/zram/zram_drv.h
+++ b/drivers/staging/zram/zram_drv.h
@@ -107,8 +107,9 @@ struct zram {
 	void *compress_buffer;
 	struct table *table;
 	spinlock_t stat64_lock;	/* protect 64-bit stats */
-	struct rw_semaphore lock; /* protect compression buffers and table
-				   * against concurrent read and writes */
+	struct rw_semaphore lock; /* protect compression buffers, table,
+				   * 32bit stat counters against concurrent
+				   * notifications, reads and writes */
 	struct request_queue *queue;
 	struct gendisk *disk;
 	int init_done;
diff --git a/drivers/staging/zram/zram_sysfs.c b/drivers/staging/zram/zram_sysfs.c
index 0ea8ed2..1fae1e9 100644
--- a/drivers/staging/zram/zram_sysfs.c
+++ b/drivers/staging/zram/zram_sysfs.c
@@ -186,10 +186,12 @@ static ssize_t mem_used_total_show(struct device *dev,
 	u64 val = 0;
 	struct zram *zram = dev_to_zram(dev);
 
+	down_read(&zram->init_lock);
 	if (zram->init_done) {
 		val = xv_get_total_size_bytes(zram->mem_pool) +
 			((u64)(zram->stats.pages_expand) << PAGE_SHIFT);
 	}
+	up_read(&zram->init_lock);
 
 	return sprintf(buf, "%llu\n", val);
 }
diff --git a/drivers/target/iscsi/iscsi_target_configfs.c b/drivers/target/iscsi/iscsi_target_configfs.c
index 83dcf49..3b80285 100644
--- a/drivers/target/iscsi/iscsi_target_configfs.c
+++ b/drivers/target/iscsi/iscsi_target_configfs.c
@@ -419,7 +419,7 @@ static ssize_t __iscsi_##prefix##_store_##name(				\
 	if (!capable(CAP_SYS_ADMIN))					\
 		return -EPERM;						\
 									\
-	snprintf(auth->name, PAGE_SIZE, "%s", page);			\
+	snprintf(auth->name, sizeof(auth->name), "%s", page);		\
 	if (!strncmp("NULL", auth->name, 4))				\
 		auth->naf_flags &= ~flags;				\
 	else								\
diff --git a/drivers/tty/serial/8250_pci.c b/drivers/tty/serial/8250_pci.c
index 6986256..6c9bcdf 100644
--- a/drivers/tty/serial/8250_pci.c
+++ b/drivers/tty/serial/8250_pci.c
@@ -4083,10 +4083,6 @@ static struct pci_device_id serial_pci_tbl[] = {
 		PCI_VENDOR_ID_IBM, 0x0299,
 		0, 0, pbn_b0_bt_2_115200 },
 
-	{	PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9835,
-		0x1000, 0x0012,
-		0, 0, pbn_b0_bt_2_115200 },
-
 	{	PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9901,
 		0xA000, 0x1000,
 		0, 0, pbn_b0_1_115200 },
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index 8d70fbc..c0b4872 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -940,22 +940,37 @@ static unsigned int dma_handle_tx(struct eg20t_port *priv)
 static void pch_uart_err_ir(struct eg20t_port *priv, unsigned int lsr)
 {
 	u8 fcr = ioread8(priv->membase + UART_FCR);
+	struct uart_port *port = &priv->port;
+	struct tty_struct *tty = tty_port_tty_get(&port->state->port);
+	char   *error_msg[5] = {};
+	int    i = 0;
 
 	/* Reset FIFO */
 	fcr |= UART_FCR_CLEAR_RCVR;
 	iowrite8(fcr, priv->membase + UART_FCR);
 
 	if (lsr & PCH_UART_LSR_ERR)
-		dev_err(&priv->pdev->dev, "Error data in FIFO\n");
+		error_msg[i++] = "Error data in FIFO\n";
 
-	if (lsr & UART_LSR_FE)
-		dev_err(&priv->pdev->dev, "Framing Error\n");
+	if (lsr & UART_LSR_FE) {
+		port->icount.frame++;
+		error_msg[i++] = "  Framing Error\n";
+	}
 
-	if (lsr & UART_LSR_PE)
-		dev_err(&priv->pdev->dev, "Parity Error\n");
+	if (lsr & UART_LSR_PE) {
+		port->icount.parity++;
+		error_msg[i++] = "  Parity Error\n";
+	}
 
-	if (lsr & UART_LSR_OE)
-		dev_err(&priv->pdev->dev, "Overrun Error\n");
+	if (lsr & UART_LSR_OE) {
+		port->icount.overrun++;
+		error_msg[i++] = "  Overrun Error\n";
+	}
+
+	if (tty == NULL) {
+		for (i = 0; error_msg[i] != NULL; i++)
+			dev_err(&priv->pdev->dev, error_msg[i]);
+	}
 }
 
 static irqreturn_t pch_uart_interrupt(int irq, void *dev_id)
diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c
index a5570b6..8d7fb6b 100644
--- a/drivers/usb/gadget/f_mass_storage.c
+++ b/drivers/usb/gadget/f_mass_storage.c
@@ -512,6 +512,7 @@ static int fsg_set_halt(struct fsg_dev *fsg, struct usb_ep *ep)
 /* Caller must hold fsg->lock */
 static void wakeup_thread(struct fsg_common *common)
 {
+	smp_wmb();	/* ensure the write of bh->state is complete */
 	/* Tell the main thread that something has happened */
 	common->thread_wakeup_needed = 1;
 	if (common->thread_task)
@@ -731,6 +732,7 @@ static int sleep_thread(struct fsg_common *common)
 	}
 	__set_current_state(TASK_RUNNING);
 	common->thread_wakeup_needed = 0;
+	smp_rmb();	/* ensure the latest bh->state is visible */
 	return rc;
 }
 
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 5018e33..ec73541 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -271,6 +271,10 @@ static struct xhci_container_ctx *xhci_alloc_container_ctx(struct xhci_hcd *xhci
 		ctx->size += CTX_SIZE(xhci->hcc_params);
 
 	ctx->bytes = dma_pool_alloc(xhci->device_pool, flags, &ctx->dma);
+	if (!ctx->bytes) {
+		kfree(ctx);
+		return NULL;
+	}
 	memset(ctx->bytes, 0, ctx->size);
 	return ctx;
 }
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 8ea37bc..b8365a7 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -159,8 +159,6 @@ static void option_instat_callback(struct urb *urb);
 #define NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_FULLSPEED	0x9000
 #define NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_HIGHSPEED	0x9001
 #define NOVATELWIRELESS_PRODUCT_E362		0x9010
-#define NOVATELWIRELESS_PRODUCT_G1		0xA001
-#define NOVATELWIRELESS_PRODUCT_G1_M		0xA002
 #define NOVATELWIRELESS_PRODUCT_G2		0xA010
 #define NOVATELWIRELESS_PRODUCT_MC551		0xB001
 
@@ -744,8 +742,6 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC547) },
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_HIGHSPEED) },
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_HIGHSPEED) },
-	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_G1) },
-	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_G1_M) },
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_G2) },
 	/* Novatel Ovation MC551 a.k.a. Verizon USB551L */
 	{ USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC551, 0xff, 0xff, 0xff) },
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index 5535c3a..e8c4f0c 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -37,7 +37,13 @@ static const struct usb_device_id id_table[] = {
 	{DEVICE_G1K(0x04da, 0x250c)},	/* Panasonic Gobi QDL device */
 	{DEVICE_G1K(0x413c, 0x8172)},	/* Dell Gobi Modem device */
 	{DEVICE_G1K(0x413c, 0x8171)},	/* Dell Gobi QDL device */
-	{DEVICE_G1K(0x1410, 0xa001)},	/* Novatel Gobi Modem device */
+	{DEVICE_G1K(0x1410, 0xa001)},	/* Novatel/Verizon USB-1000 */
+	{DEVICE_G1K(0x1410, 0xa002)},	/* Novatel Gobi Modem device */
+	{DEVICE_G1K(0x1410, 0xa003)},	/* Novatel Gobi Modem device */
+	{DEVICE_G1K(0x1410, 0xa004)},	/* Novatel Gobi Modem device */
+	{DEVICE_G1K(0x1410, 0xa005)},	/* Novatel Gobi Modem device */
+	{DEVICE_G1K(0x1410, 0xa006)},	/* Novatel Gobi Modem device */
+	{DEVICE_G1K(0x1410, 0xa007)},	/* Novatel Gobi Modem device */
 	{DEVICE_G1K(0x1410, 0xa008)},	/* Novatel Gobi QDL device */
 	{DEVICE_G1K(0x0b05, 0x1776)},	/* Asus Gobi Modem device */
 	{DEVICE_G1K(0x0b05, 0x1774)},	/* Asus Gobi QDL device */
diff --git a/drivers/video/console/vgacon.c b/drivers/video/console/vgacon.c
index 5855d17..9d8feac 100644
--- a/drivers/video/console/vgacon.c
+++ b/drivers/video/console/vgacon.c
@@ -42,6 +42,7 @@
 #include <linux/kd.h>
 #include <linux/slab.h>
 #include <linux/vt_kern.h>
+#include <linux/sched.h>
 #include <linux/selection.h>
 #include <linux/spinlock.h>
 #include <linux/ioport.h>
@@ -1124,11 +1125,15 @@ static int vgacon_do_font_op(struct vgastate *state,char *arg,int set,int ch512)
 
 	if (arg) {
 		if (set)
-			for (i = 0; i < cmapsz; i++)
+			for (i = 0; i < cmapsz; i++) {
 				vga_writeb(arg[i], charmap + i);
+				cond_resched();
+			}
 		else
-			for (i = 0; i < cmapsz; i++)
+			for (i = 0; i < cmapsz; i++) {
 				arg[i] = vga_readb(charmap + i);
+				cond_resched();
+			}
 
 		/*
 		 * In 512-character mode, the character map is not contiguous if
@@ -1139,11 +1144,15 @@ static int vgacon_do_font_op(struct vgastate *state,char *arg,int set,int ch512)
 			charmap += 2 * cmapsz;
 			arg += cmapsz;
 			if (set)
-				for (i = 0; i < cmapsz; i++)
+				for (i = 0; i < cmapsz; i++) {
 					vga_writeb(arg[i], charmap + i);
+					cond_resched();
+				}
 			else
-				for (i = 0; i < cmapsz; i++)
+				for (i = 0; i < cmapsz; i++) {
 					arg[i] = vga_readb(charmap + i);
+					cond_resched();
+				}
 		}
 	}
 
diff --git a/fs/block_dev.c b/fs/block_dev.c
index 53ab273..c103267 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -55,17 +55,24 @@ static void bdev_inode_switch_bdi(struct inode *inode,
 			struct backing_dev_info *dst)
 {
 	struct backing_dev_info *old = inode->i_data.backing_dev_info;
+	bool wakeup_bdi = false;
 
 	if (unlikely(dst == old))		/* deadlock avoidance */
 		return;
 	bdi_lock_two(&old->wb, &dst->wb);
 	spin_lock(&inode->i_lock);
 	inode->i_data.backing_dev_info = dst;
-	if (inode->i_state & I_DIRTY)
+	if (inode->i_state & I_DIRTY) {
+		if (bdi_cap_writeback_dirty(dst) && !wb_has_dirty_io(&dst->wb))
+			wakeup_bdi = true;
 		list_move(&inode->i_wb_list, &dst->wb.b_dirty);
+	}
 	spin_unlock(&inode->i_lock);
 	spin_unlock(&old->wb.list_lock);
 	spin_unlock(&dst->wb.list_lock);
+
+	if (wakeup_bdi)
+		bdi_wakeup_thread_delayed(dst);
 }
 
 sector_t blkdev_max_block(struct block_device *bdev)
diff --git a/fs/ceph/super.c b/fs/ceph/super.c
index b48f15f..de268a8 100644
--- a/fs/ceph/super.c
+++ b/fs/ceph/super.c
@@ -70,8 +70,14 @@ static int ceph_statfs(struct dentry *dentry, struct kstatfs *buf)
 	/*
 	 * express utilization in terms of large blocks to avoid
 	 * overflow on 32-bit machines.
+	 *
+	 * NOTE: for the time being, we make bsize == frsize to humor
+	 * not-yet-ancient versions of glibc that are broken.
+	 * Someday, we will probably want to report a real block
+	 * size...  whatever that may mean for a network file system!
 	 */
 	buf->f_bsize = 1 << CEPH_BLOCK_SHIFT;
+	buf->f_frsize = 1 << CEPH_BLOCK_SHIFT;
 	buf->f_blocks = le64_to_cpu(st.kb) >> (CEPH_BLOCK_SHIFT-10);
 	buf->f_bfree = le64_to_cpu(st.kb_avail) >> (CEPH_BLOCK_SHIFT-10);
 	buf->f_bavail = le64_to_cpu(st.kb_avail) >> (CEPH_BLOCK_SHIFT-10);
@@ -79,7 +85,6 @@ static int ceph_statfs(struct dentry *dentry, struct kstatfs *buf)
 	buf->f_files = le64_to_cpu(st.num_objects);
 	buf->f_ffree = -1;
 	buf->f_namelen = NAME_MAX;
-	buf->f_frsize = PAGE_CACHE_SIZE;
 
 	/* leave fsid little-endian, regardless of host endianness */
 	fsid = *(u64 *)(&monmap->fsid) ^ *((u64 *)&monmap->fsid + 1);
diff --git a/fs/ceph/super.h b/fs/ceph/super.h
index edcbf37..a097817 100644
--- a/fs/ceph/super.h
+++ b/fs/ceph/super.h
@@ -21,7 +21,7 @@
 
 /* large granularity for statfs utilization stats to facilitate
  * large volume sizes on 32-bit machines. */
-#define CEPH_BLOCK_SHIFT   20  /* 1 MB */
+#define CEPH_BLOCK_SHIFT   22  /* 4 MB */
 #define CEPH_BLOCK         (1 << CEPH_BLOCK_SHIFT)
 
 #define CEPH_MOUNT_OPT_DIRSTAT         (1<<4) /* `cat dirname` for stats */
diff --git a/fs/cifs/cifs_unicode.h b/fs/cifs/cifs_unicode.h
index 6d02fd5..aab18fe 100644
--- a/fs/cifs/cifs_unicode.h
+++ b/fs/cifs/cifs_unicode.h
@@ -323,14 +323,14 @@ UniToupper(register wchar_t uc)
 /*
  * UniStrupr:  Upper case a unicode string
  */
-static inline wchar_t *
-UniStrupr(register wchar_t *upin)
+static inline __le16 *
+UniStrupr(register __le16 *upin)
 {
-	register wchar_t *up;
+	register __le16 *up;
 
 	up = upin;
 	while (*up) {		/* For all characters */
-		*up = UniToupper(*up);
+		*up = cpu_to_le16(UniToupper(le16_to_cpu(*up)));
 		up++;
 	}
 	return upin;		/* Return input pointer */
diff --git a/fs/cifs/cifsencrypt.c b/fs/cifs/cifsencrypt.c
index 5d9b9ac..cdcd665 100644
--- a/fs/cifs/cifsencrypt.c
+++ b/fs/cifs/cifsencrypt.c
@@ -394,7 +394,7 @@ static int calc_ntlmv2_hash(struct cifs_ses *ses, char *ntlmv2_hash,
 	int rc = 0;
 	int len;
 	char nt_hash[CIFS_NTHASH_SIZE];
-	wchar_t *user;
+	__le16 *user;
 	wchar_t *domain;
 	wchar_t *server;
 
@@ -419,7 +419,7 @@ static int calc_ntlmv2_hash(struct cifs_ses *ses, char *ntlmv2_hash,
 		return rc;
 	}
 
-	/* convert ses->user_name to unicode and uppercase */
+	/* convert ses->user_name to unicode */
 	len = strlen(ses->user_name);
 	user = kmalloc(2 + (len * 2), GFP_KERNEL);
 	if (user == NULL) {
@@ -427,7 +427,7 @@ static int calc_ntlmv2_hash(struct cifs_ses *ses, char *ntlmv2_hash,
 		rc = -ENOMEM;
 		return rc;
 	}
-	len = cifs_strtoUCS((__le16 *)user, ses->user_name, len, nls_cp);
+	len = cifs_strtoUCS(user, ses->user_name, len, nls_cp);
 	UniStrupr(user);
 
 	rc = crypto_shash_update(&ses->server->secmech.sdeschmacmd5->shash,
diff --git a/fs/exec.c b/fs/exec.c
index 312e297..a2d0e51 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -1159,13 +1159,6 @@ void setup_new_exec(struct linux_binprm * bprm)
 			set_dumpable(current->mm, suid_dumpable);
 	}
 
-	/*
-	 * Flush performance counters when crossing a
-	 * security domain:
-	 */
-	if (!get_dumpable(current->mm))
-		perf_event_exit_task(current);
-
 	/* An exec changes our domain. We are no longer part of the thread
 	   group */
 
@@ -1229,6 +1222,15 @@ void install_exec_creds(struct linux_binprm *bprm)
 
 	commit_creds(bprm->cred);
 	bprm->cred = NULL;
+
+	/*
+	 * Disable monitoring for regular users
+	 * when executing setuid binaries. Must
+	 * wait until new credentials are committed
+	 * by commit_creds() above
+	 */
+	if (get_dumpable(current->mm) != SUID_DUMP_USER)
+		perf_event_exit_task(current);
 	/*
 	 * cred_guard_mutex must be held at least to this point to prevent
 	 * ptrace_attach() from altering our determination of the task's
diff --git a/fs/ext3/namei.c b/fs/ext3/namei.c
index 642dc6d..1272dfb 100644
--- a/fs/ext3/namei.c
+++ b/fs/ext3/namei.c
@@ -585,11 +585,8 @@ static int htree_dirblock_to_tree(struct file *dir_file,
 		if (!ext3_check_dir_entry("htree_dirblock_to_tree", dir, de, bh,
 					(block<<EXT3_BLOCK_SIZE_BITS(dir->i_sb))
 						+((char *)de - bh->b_data))) {
-			/* On error, skip the f_pos to the next block. */
-			dir_file->f_pos = (dir_file->f_pos |
-					(dir->i_sb->s_blocksize - 1)) + 1;
-			brelse (bh);
-			return count;
+			/* silently ignore the rest of the block */
+			break;
 		}
 		ext3fs_dirhash(de->name, de->name_len, hinfo);
 		if ((hinfo->hash < start_hash) ||
diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index ce0bc25..3e8fc80 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -4801,7 +4801,7 @@ static int ext4_xattr_fiemap(struct inode *inode,
 		error = ext4_get_inode_loc(inode, &iloc);
 		if (error)
 			return error;
-		physical = iloc.bh->b_blocknr << blockbits;
+		physical = (__u64)iloc.bh->b_blocknr << blockbits;
 		offset = EXT4_GOOD_OLD_INODE_SIZE +
 				EXT4_I(inode)->i_extra_isize;
 		physical += offset;
@@ -4809,7 +4809,7 @@ static int ext4_xattr_fiemap(struct inode *inode,
 		flags |= FIEMAP_EXTENT_DATA_INLINE;
 		brelse(iloc.bh);
 	} else { /* external block */
-		physical = EXT4_I(inode)->i_file_acl << blockbits;
+		physical = (__u64)EXT4_I(inode)->i_file_acl << blockbits;
 		length = inode->i_sb->s_blocksize;
 	}
 
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 025b4b6..45778a6 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -4335,7 +4335,7 @@ int ext4_getattr(struct vfsmount *mnt, struct dentry *dentry,
 		 struct kstat *stat)
 {
 	struct inode *inode;
-	unsigned long delalloc_blocks;
+	unsigned long long delalloc_blocks;
 
 	inode = dentry->d_inode;
 	generic_fillattr(inode, stat);
@@ -4352,7 +4352,7 @@ int ext4_getattr(struct vfsmount *mnt, struct dentry *dentry,
 	 */
 	delalloc_blocks = EXT4_I(inode)->i_reserved_data_blocks;
 
-	stat->blocks += (delalloc_blocks << inode->i_sb->s_blocksize_bits)>>9;
+	stat->blocks += delalloc_blocks << (inode->i_sb->s_blocksize_bits-9);
 	return 0;
 }
 
diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c
index 88f97e5..3ca3b7f 100644
--- a/fs/ext4/namei.c
+++ b/fs/ext4/namei.c
@@ -585,11 +585,8 @@ static int htree_dirblock_to_tree(struct file *dir_file,
 		if (ext4_check_dir_entry(dir, NULL, de, bh,
 				(block<<EXT4_BLOCK_SIZE_BITS(dir->i_sb))
 					 + ((char *)de - bh->b_data))) {
-			/* On error, skip the f_pos to the next block. */
-			dir_file->f_pos = (dir_file->f_pos |
-					(dir->i_sb->s_blocksize - 1)) + 1;
-			brelse(bh);
-			return count;
+			/* silently ignore the rest of the block */
+			break;
 		}
 		ext4fs_dirhash(de->name, de->name_len, hinfo);
 		if ((hinfo->hash < start_hash) ||
diff --git a/fs/hpfs/map.c b/fs/hpfs/map.c
index a790821..ea3d1ca 100644
--- a/fs/hpfs/map.c
+++ b/fs/hpfs/map.c
@@ -17,7 +17,8 @@ unsigned int *hpfs_map_bitmap(struct super_block *s, unsigned bmp_block,
 			 struct quad_buffer_head *qbh, char *id)
 {
 	secno sec;
-	if (hpfs_sb(s)->sb_chk) if (bmp_block * 16384 > hpfs_sb(s)->sb_fs_size) {
+	unsigned n_bands = (hpfs_sb(s)->sb_fs_size + 0x3fff) >> 14;
+	if (hpfs_sb(s)->sb_chk) if (bmp_block >= n_bands) {
 		hpfs_error(s, "hpfs_map_bitmap called with bad parameter: %08x at %s", bmp_block, id);
 		return NULL;
 	}
diff --git a/fs/hpfs/super.c b/fs/hpfs/super.c
index 98580a3..f760c15 100644
--- a/fs/hpfs/super.c
+++ b/fs/hpfs/super.c
@@ -553,7 +553,13 @@ static int hpfs_fill_super(struct super_block *s, void *options, int silent)
 	sbi->sb_cp_table = NULL;
 	sbi->sb_c_bitmap = -1;
 	sbi->sb_max_fwd_alloc = 0xffffff;
-	
+
+	if (sbi->sb_fs_size >= 0x80000000) {
+		hpfs_error(s, "invalid size in superblock: %08x",
+			(unsigned)sbi->sb_fs_size);
+		goto bail4;
+	}
+
 	/* Load bitmap directory */
 	if (!(sbi->sb_bmp_dir = hpfs_load_bitmap_directory(s, le32_to_cpu(superblock->bitmaps))))
 		goto bail4;
diff --git a/fs/jbd2/transaction.c b/fs/jbd2/transaction.c
index 6ac5bb1..18ea4d9 100644
--- a/fs/jbd2/transaction.c
+++ b/fs/jbd2/transaction.c
@@ -470,10 +470,10 @@ int jbd2__journal_restart(handle_t *handle, int nblocks, gfp_t gfp_mask)
 		   &transaction->t_outstanding_credits);
 	if (atomic_dec_and_test(&transaction->t_updates))
 		wake_up(&journal->j_wait_updates);
+	tid = transaction->t_tid;
 	spin_unlock(&transaction->t_handle_lock);
 
 	jbd_debug(2, "restarting handle %p\n", handle);
-	tid = transaction->t_tid;
 	need_to_start = !tid_geq(journal->j_commit_request, tid);
 	read_unlock(&journal->j_state_lock);
 	if (need_to_start)
diff --git a/fs/nfsd/nfs4xdr.c b/fs/nfsd/nfs4xdr.c
index ade5316..99625b8 100644
--- a/fs/nfsd/nfs4xdr.c
+++ b/fs/nfsd/nfs4xdr.c
@@ -177,8 +177,8 @@ static __be32 *read_buf(struct nfsd4_compoundargs *argp, u32 nbytes)
 	 */
 	memcpy(p, argp->p, avail);
 	/* step to next page */
-	argp->p = page_address(argp->pagelist[0]);
 	argp->pagelist++;
+	argp->p = page_address(argp->pagelist[0]);
 	if (argp->pagelen < PAGE_SIZE) {
 		argp->end = argp->p + (argp->pagelen>>2);
 		argp->pagelen = 0;
diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c
index 0d5ea9c..bef187b 100644
--- a/fs/ocfs2/xattr.c
+++ b/fs/ocfs2/xattr.c
@@ -6499,6 +6499,16 @@ static int ocfs2_reflink_xattr_inline(struct ocfs2_xattr_reflink *args)
 	}
 
 	new_oi = OCFS2_I(args->new_inode);
+	/*
+	 * Adjust extent record count to reserve space for extended attribute.
+	 * Inline data count had been adjusted in ocfs2_duplicate_inline_data().
+	 */
+	if (!(new_oi->ip_dyn_features & OCFS2_INLINE_DATA_FL) &&
+	    !(ocfs2_inode_is_fast_symlink(args->new_inode))) {
+		struct ocfs2_extent_list *el = &new_di->id2.i_list;
+		le16_add_cpu(&el->l_count, -(inline_size /
+					sizeof(struct ocfs2_extent_rec)));
+	}
 	spin_lock(&new_oi->ip_lock);
 	new_oi->ip_dyn_features |= OCFS2_HAS_XATTR_FL | OCFS2_INLINE_XATTR_FL;
 	new_di->i_dyn_features = cpu_to_le16(new_oi->ip_dyn_features);
diff --git a/fs/ubifs/dir.c b/fs/ubifs/dir.c
index 6834920..aaebf0f 100644
--- a/fs/ubifs/dir.c
+++ b/fs/ubifs/dir.c
@@ -357,31 +357,50 @@ static unsigned int vfs_dent_type(uint8_t type)
 static int ubifs_readdir(struct file *file, void *dirent, filldir_t filldir)
 {
 	int err, over = 0;
+	loff_t pos = file->f_pos;
 	struct qstr nm;
 	union ubifs_key key;
 	struct ubifs_dent_node *dent;
 	struct inode *dir = file->f_path.dentry->d_inode;
 	struct ubifs_info *c = dir->i_sb->s_fs_info;
 
-	dbg_gen("dir ino %lu, f_pos %#llx", dir->i_ino, file->f_pos);
+	dbg_gen("dir ino %lu, f_pos %#llx", dir->i_ino, pos);
 
-	if (file->f_pos > UBIFS_S_KEY_HASH_MASK || file->f_pos == 2)
+	if (pos > UBIFS_S_KEY_HASH_MASK || pos == 2)
 		/*
 		 * The directory was seek'ed to a senseless position or there
 		 * are no more entries.
 		 */
 		return 0;
 
+	if (file->f_version == 0) {
+		/*
+		 * The file was seek'ed, which means that @file->private_data
+		 * is now invalid. This may also be just the first
+		 * 'ubifs_readdir()' invocation, in which case
+		 * @file->private_data is NULL, and the below code is
+		 * basically a no-op.
+		 */
+		kfree(file->private_data);
+		file->private_data = NULL;
+	}
+
+	/*
+	 * 'generic_file_llseek()' unconditionally sets @file->f_version to
+	 * zero, and we use this for detecting whether the file was seek'ed.
+	 */
+	file->f_version = 1;
+
 	/* File positions 0 and 1 correspond to "." and ".." */
-	if (file->f_pos == 0) {
+	if (pos == 0) {
 		ubifs_assert(!file->private_data);
 		over = filldir(dirent, ".", 1, 0, dir->i_ino, DT_DIR);
 		if (over)
 			return 0;
-		file->f_pos = 1;
+		file->f_pos = pos = 1;
 	}
 
-	if (file->f_pos == 1) {
+	if (pos == 1) {
 		ubifs_assert(!file->private_data);
 		over = filldir(dirent, "..", 2, 1,
 			       parent_ino(file->f_path.dentry), DT_DIR);
@@ -397,7 +416,7 @@ static int ubifs_readdir(struct file *file, void *dirent, filldir_t filldir)
 			goto out;
 		}
 
-		file->f_pos = key_hash_flash(c, &dent->key);
+		file->f_pos = pos = key_hash_flash(c, &dent->key);
 		file->private_data = dent;
 	}
 
@@ -405,17 +424,16 @@ static int ubifs_readdir(struct file *file, void *dirent, filldir_t filldir)
 	if (!dent) {
 		/*
 		 * The directory was seek'ed to and is now readdir'ed.
-		 * Find the entry corresponding to @file->f_pos or the
-		 * closest one.
+		 * Find the entry corresponding to @pos or the closest one.
 		 */
-		dent_key_init_hash(c, &key, dir->i_ino, file->f_pos);
+		dent_key_init_hash(c, &key, dir->i_ino, pos);
 		nm.name = NULL;
 		dent = ubifs_tnc_next_ent(c, &key, &nm);
 		if (IS_ERR(dent)) {
 			err = PTR_ERR(dent);
 			goto out;
 		}
-		file->f_pos = key_hash_flash(c, &dent->key);
+		file->f_pos = pos = key_hash_flash(c, &dent->key);
 		file->private_data = dent;
 	}
 
@@ -427,7 +445,7 @@ static int ubifs_readdir(struct file *file, void *dirent, filldir_t filldir)
 			     ubifs_inode(dir)->creat_sqnum);
 
 		nm.len = le16_to_cpu(dent->nlen);
-		over = filldir(dirent, dent->name, nm.len, file->f_pos,
+		over = filldir(dirent, dent->name, nm.len, pos,
 			       le64_to_cpu(dent->inum),
 			       vfs_dent_type(dent->type));
 		if (over)
@@ -443,9 +461,17 @@ static int ubifs_readdir(struct file *file, void *dirent, filldir_t filldir)
 		}
 
 		kfree(file->private_data);
-		file->f_pos = key_hash_flash(c, &dent->key);
+		file->f_pos = pos = key_hash_flash(c, &dent->key);
 		file->private_data = dent;
 		cond_resched();
+
+		if (file->f_version == 0)
+			/*
+			 * The file was seek'ed meanwhile, lets return and start
+			 * reading direntries from the new position on the next
+			 * invocation.
+			 */
+			return 0;
 	}
 
 out:
@@ -456,15 +482,13 @@ out:
 
 	kfree(file->private_data);
 	file->private_data = NULL;
+	/* 2 is a special value indicating that there are no more direntries */
 	file->f_pos = 2;
 	return 0;
 }
 
-/* If a directory is seeked, we have to free saved readdir() state */
 static loff_t ubifs_dir_llseek(struct file *file, loff_t offset, int origin)
 {
-	kfree(file->private_data);
-	file->private_data = NULL;
 	return generic_file_llseek(file, offset, origin);
 }
 
diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h
index 9bab75f..ace0984 100644
--- a/include/linux/cgroup.h
+++ b/include/linux/cgroup.h
@@ -531,16 +531,54 @@ static inline struct cgroup_subsys_state *cgroup_subsys_state(
 	return cgrp->subsys[subsys_id];
 }
 
-/*
- * function to get the cgroup_subsys_state which allows for extra
- * rcu_dereference_check() conditions, such as locks used during the
- * cgroup_subsys::attach() methods.
+/**
+ * task_css_set_check - obtain a task's css_set with extra access conditions
+ * @task: the task to obtain css_set for
+ * @__c: extra condition expression to be passed to rcu_dereference_check()
+ *
+ * A task's css_set is RCU protected, initialized and exited while holding
+ * task_lock(), and can only be modified while holding both cgroup_mutex
+ * and task_lock() while the task is alive.  This macro verifies that the
+ * caller is inside proper critical section and returns @task's css_set.
+ *
+ * The caller can also specify additional allowed conditions via @__c, such
+ * as locks used during the cgroup_subsys::attach() methods.
+ */
+#define task_css_set_check(task, __c)					\
+	rcu_dereference_check((task)->cgroups,				\
+		lockdep_is_held(&(task)->alloc_lock) ||			\
+		cgroup_lock_is_held() || (__c))
+
+/**
+ * task_subsys_state_check - obtain css for (task, subsys) w/ extra access conds
+ * @task: the target task
+ * @subsys_id: the target subsystem ID
+ * @__c: extra condition expression to be passed to rcu_dereference_check()
+ *
+ * Return the cgroup_subsys_state for the (@task, @subsys_id) pair.  The
+ * synchronization rules are the same as task_css_set_check().
  */
 #define task_subsys_state_check(task, subsys_id, __c)			\
-	rcu_dereference_check(task->cgroups->subsys[subsys_id],		\
-			      lockdep_is_held(&task->alloc_lock) ||	\
-			      cgroup_lock_is_held() || (__c))
+	task_css_set_check((task), (__c))->subsys[(subsys_id)]
+
+/**
+ * task_css_set - obtain a task's css_set
+ * @task: the task to obtain css_set for
+ *
+ * See task_css_set_check().
+ */
+static inline struct css_set *task_css_set(struct task_struct *task)
+{
+	return task_css_set_check(task, false);
+}
 
+/**
+ * task_subsys_state - obtain css for (task, subsys)
+ * @task: the target task
+ * @subsys_id: the target subsystem ID
+ *
+ * See task_subsys_state_check().
+ */
 static inline struct cgroup_subsys_state *
 task_subsys_state(struct task_struct *task, int subsys_id)
 {
diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h
index a2227f7..32697c1 100644
--- a/include/linux/hugetlb.h
+++ b/include/linux/hugetlb.h
@@ -327,6 +327,17 @@ static inline unsigned hstate_index_to_shift(unsigned index)
 	return hstates[index].order + PAGE_SHIFT;
 }
 
+pgoff_t __basepage_index(struct page *page);
+
+/* Return page->index in PAGE_SIZE units */
+static inline pgoff_t basepage_index(struct page *page)
+{
+	if (!PageCompound(page))
+		return page->index;
+
+	return __basepage_index(page);
+}
+
 #else
 struct hstate {};
 #define alloc_huge_page_node(h, nid) NULL
@@ -345,6 +356,11 @@ static inline unsigned int pages_per_huge_page(struct hstate *h)
 	return 1;
 }
 #define hstate_index_to_shift(index) 0
+
+static inline pgoff_t basepage_index(struct page *page)
+{
+	return page->index;
+}
 #endif
 
 #endif /* _LINUX_HUGETLB_H */
diff --git a/include/linux/nbd.h b/include/linux/nbd.h
index d146ca1..e6fe174 100644
--- a/include/linux/nbd.h
+++ b/include/linux/nbd.h
@@ -68,6 +68,7 @@ struct nbd_device {
 	u64 bytesize;
 	pid_t pid; /* pid of nbd-client, if attached */
 	int xmit_timeout;
+	int disconnect; /* a disconnect has been requested by user */
 };
 
 #endif
diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
index 9b9b2aa..3cfcfea 100644
--- a/include/linux/perf_event.h
+++ b/include/linux/perf_event.h
@@ -819,8 +819,7 @@ struct perf_event {
 	/* mmap bits */
 	struct mutex			mmap_mutex;
 	atomic_t			mmap_count;
-	int				mmap_locked;
-	struct user_struct		*mmap_user;
+
 	struct ring_buffer		*rb;
 	struct list_head		rb_entry;
 
diff --git a/kernel/events/core.c b/kernel/events/core.c
index 9f21915..8be9b746 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -185,9 +185,6 @@ static void cpu_ctx_sched_in(struct perf_cpu_context *cpuctx,
 static void update_context_time(struct perf_event_context *ctx);
 static u64 perf_event_time(struct perf_event *event);
 
-static void ring_buffer_attach(struct perf_event *event,
-			       struct ring_buffer *rb);
-
 void __weak perf_event_print_debug(void)	{ }
 
 extern __weak const char *perf_pmu_name(void)
@@ -714,8 +711,18 @@ perf_lock_task_context(struct task_struct *task, int ctxn, unsigned long *flags)
 {
 	struct perf_event_context *ctx;
 
-	rcu_read_lock();
 retry:
+	/*
+	 * One of the few rules of preemptible RCU is that one cannot do
+	 * rcu_read_unlock() while holding a scheduler (or nested) lock when
+	 * part of the read side critical section was preemptible -- see
+	 * rcu_read_unlock_special().
+	 *
+	 * Since ctx->lock nests under rq->lock we must ensure the entire read
+	 * side critical section is non-preemptible.
+	 */
+	preempt_disable();
+	rcu_read_lock();
 	ctx = rcu_dereference(task->perf_event_ctxp[ctxn]);
 	if (ctx) {
 		/*
@@ -731,6 +738,8 @@ retry:
 		raw_spin_lock_irqsave(&ctx->lock, *flags);
 		if (ctx != rcu_dereference(task->perf_event_ctxp[ctxn])) {
 			raw_spin_unlock_irqrestore(&ctx->lock, *flags);
+			rcu_read_unlock();
+			preempt_enable();
 			goto retry;
 		}
 
@@ -740,6 +749,7 @@ retry:
 		}
 	}
 	rcu_read_unlock();
+	preempt_enable();
 	return ctx;
 }
 
@@ -1687,7 +1697,16 @@ static int __perf_event_enable(void *info)
 	struct perf_cpu_context *cpuctx = __get_cpu_context(ctx);
 	int err;
 
-	if (WARN_ON_ONCE(!ctx->is_active))
+	/*
+	 * There's a time window between 'ctx->is_active' check
+	 * in perf_event_enable function and this place having:
+	 *   - IRQs on
+	 *   - ctx->lock unlocked
+	 *
+	 * where the task could be killed and 'ctx' deactivated
+	 * by perf_event_exit_task.
+	 */
+	if (!ctx->is_active)
 		return -EINVAL;
 
 	raw_spin_lock(&ctx->lock);
@@ -2939,6 +2958,7 @@ static void free_event_rcu(struct rcu_head *head)
 }
 
 static void ring_buffer_put(struct ring_buffer *rb);
+static void ring_buffer_detach(struct perf_event *event, struct ring_buffer *rb);
 
 static void free_event(struct perf_event *event)
 {
@@ -2962,8 +2982,22 @@ static void free_event(struct perf_event *event)
 	}
 
 	if (event->rb) {
-		ring_buffer_put(event->rb);
-		event->rb = NULL;
+		struct ring_buffer *rb;
+
+		/*
+		 * Can happen when we close an event with re-directed output.
+		 *
+		 * Since we have a 0 refcount, perf_mmap_close() will skip
+		 * over us; possibly making our ring_buffer_put() the last.
+		 */
+		mutex_lock(&event->mmap_mutex);
+		rb = event->rb;
+		if (rb) {
+			rcu_assign_pointer(event->rb, NULL);
+			ring_buffer_detach(event, rb);
+			ring_buffer_put(rb); /* could be last */
+		}
+		mutex_unlock(&event->mmap_mutex);
 	}
 
 	if (is_cgroup_event(event))
@@ -3201,30 +3235,13 @@ static unsigned int perf_poll(struct file *file, poll_table *wait)
 	unsigned int events = POLL_HUP;
 
 	/*
-	 * Race between perf_event_set_output() and perf_poll(): perf_poll()
-	 * grabs the rb reference but perf_event_set_output() overrides it.
-	 * Here is the timeline for two threads T1, T2:
-	 * t0: T1, rb = rcu_dereference(event->rb)
-	 * t1: T2, old_rb = event->rb
-	 * t2: T2, event->rb = new rb
-	 * t3: T2, ring_buffer_detach(old_rb)
-	 * t4: T1, ring_buffer_attach(rb1)
-	 * t5: T1, poll_wait(event->waitq)
-	 *
-	 * To avoid this problem, we grab mmap_mutex in perf_poll()
-	 * thereby ensuring that the assignment of the new ring buffer
-	 * and the detachment of the old buffer appear atomic to perf_poll()
+	 * Pin the event->rb by taking event->mmap_mutex; otherwise
+	 * perf_event_set_output() can swizzle our rb and make us miss wakeups.
 	 */
 	mutex_lock(&event->mmap_mutex);
-
-	rcu_read_lock();
-	rb = rcu_dereference(event->rb);
-	if (rb) {
-		ring_buffer_attach(event, rb);
+	rb = event->rb;
+	if (rb)
 		events = atomic_xchg(&rb->poll, 0);
-	}
-	rcu_read_unlock();
-
 	mutex_unlock(&event->mmap_mutex);
 
 	poll_wait(file, &event->waitq, wait);
@@ -3538,16 +3555,12 @@ static void ring_buffer_attach(struct perf_event *event,
 		return;
 
 	spin_lock_irqsave(&rb->event_lock, flags);
-	if (!list_empty(&event->rb_entry))
-		goto unlock;
-
-	list_add(&event->rb_entry, &rb->event_list);
-unlock:
+	if (list_empty(&event->rb_entry))
+		list_add(&event->rb_entry, &rb->event_list);
 	spin_unlock_irqrestore(&rb->event_lock, flags);
 }
 
-static void ring_buffer_detach(struct perf_event *event,
-			       struct ring_buffer *rb)
+static void ring_buffer_detach(struct perf_event *event, struct ring_buffer *rb)
 {
 	unsigned long flags;
 
@@ -3566,13 +3579,10 @@ static void ring_buffer_wakeup(struct perf_event *event)
 
 	rcu_read_lock();
 	rb = rcu_dereference(event->rb);
-	if (!rb)
-		goto unlock;
-
-	list_for_each_entry_rcu(event, &rb->event_list, rb_entry)
-		wake_up_all(&event->waitq);
-
-unlock:
+	if (rb) {
+		list_for_each_entry_rcu(event, &rb->event_list, rb_entry)
+			wake_up_all(&event->waitq);
+	}
 	rcu_read_unlock();
 }
 
@@ -3601,18 +3611,10 @@ static struct ring_buffer *ring_buffer_get(struct perf_event *event)
 
 static void ring_buffer_put(struct ring_buffer *rb)
 {
-	struct perf_event *event, *n;
-	unsigned long flags;
-
 	if (!atomic_dec_and_test(&rb->refcount))
 		return;
 
-	spin_lock_irqsave(&rb->event_lock, flags);
-	list_for_each_entry_safe(event, n, &rb->event_list, rb_entry) {
-		list_del_init(&event->rb_entry);
-		wake_up_all(&event->waitq);
-	}
-	spin_unlock_irqrestore(&rb->event_lock, flags);
+	WARN_ON_ONCE(!list_empty(&rb->event_list));
 
 	call_rcu(&rb->rcu_head, rb_free_rcu);
 }
@@ -3622,26 +3624,100 @@ static void perf_mmap_open(struct vm_area_struct *vma)
 	struct perf_event *event = vma->vm_file->private_data;
 
 	atomic_inc(&event->mmap_count);
+	atomic_inc(&event->rb->mmap_count);
 }
 
+/*
+ * A buffer can be mmap()ed multiple times; either directly through the same
+ * event, or through other events by use of perf_event_set_output().
+ *
+ * In order to undo the VM accounting done by perf_mmap() we need to destroy
+ * the buffer here, where we still have a VM context. This means we need
+ * to detach all events redirecting to us.
+ */
 static void perf_mmap_close(struct vm_area_struct *vma)
 {
 	struct perf_event *event = vma->vm_file->private_data;
 
-	if (atomic_dec_and_mutex_lock(&event->mmap_count, &event->mmap_mutex)) {
-		unsigned long size = perf_data_size(event->rb);
-		struct user_struct *user = event->mmap_user;
-		struct ring_buffer *rb = event->rb;
+	struct ring_buffer *rb = event->rb;
+	struct user_struct *mmap_user = rb->mmap_user;
+	int mmap_locked = rb->mmap_locked;
+	unsigned long size = perf_data_size(rb);
+
+	atomic_dec(&rb->mmap_count);
+
+	if (!atomic_dec_and_mutex_lock(&event->mmap_count, &event->mmap_mutex))
+		return;
+
+	/* Detach current event from the buffer. */
+	rcu_assign_pointer(event->rb, NULL);
+	ring_buffer_detach(event, rb);
+	mutex_unlock(&event->mmap_mutex);
+
+	/* If there's still other mmap()s of this buffer, we're done. */
+	if (atomic_read(&rb->mmap_count)) {
+		ring_buffer_put(rb); /* can't be last */
+		return;
+	}
+
+	/*
+	 * No other mmap()s, detach from all other events that might redirect
+	 * into the now unreachable buffer. Somewhat complicated by the
+	 * fact that rb::event_lock otherwise nests inside mmap_mutex.
+	 */
+again:
+	rcu_read_lock();
+	list_for_each_entry_rcu(event, &rb->event_list, rb_entry) {
+		if (!atomic_long_inc_not_zero(&event->refcount)) {
+			/*
+			 * This event is en-route to free_event() which will
+			 * detach it and remove it from the list.
+			 */
+			continue;
+		}
+		rcu_read_unlock();
 
-		atomic_long_sub((size >> PAGE_SHIFT) + 1, &user->locked_vm);
-		vma->vm_mm->pinned_vm -= event->mmap_locked;
-		rcu_assign_pointer(event->rb, NULL);
-		ring_buffer_detach(event, rb);
+		mutex_lock(&event->mmap_mutex);
+		/*
+		 * Check we didn't race with perf_event_set_output() which can
+		 * swizzle the rb from under us while we were waiting to
+		 * acquire mmap_mutex.
+		 *
+		 * If we find a different rb; ignore this event, a next
+		 * iteration will no longer find it on the list. We have to
+		 * still restart the iteration to make sure we're not now
+		 * iterating the wrong list.
+		 */
+		if (event->rb == rb) {
+			rcu_assign_pointer(event->rb, NULL);
+			ring_buffer_detach(event, rb);
+			ring_buffer_put(rb); /* can't be last, we still have one */
+		}
 		mutex_unlock(&event->mmap_mutex);
+		put_event(event);
 
-		ring_buffer_put(rb);
-		free_uid(user);
+		/*
+		 * Restart the iteration; either we're on the wrong list or
+		 * destroyed its integrity by doing a deletion.
+		 */
+		goto again;
 	}
+	rcu_read_unlock();
+
+	/*
+	 * It could be there's still a few 0-ref events on the list; they'll
+	 * get cleaned up by free_event() -- they'll also still have their
+	 * ref on the rb and will free it whenever they are done with it.
+	 *
+	 * Aside from that, this buffer is 'fully' detached and unmapped,
+	 * undo the VM accounting.
+	 */
+
+	atomic_long_sub((size >> PAGE_SHIFT) + 1, &mmap_user->locked_vm);
+	vma->vm_mm->pinned_vm -= mmap_locked;
+	free_uid(mmap_user);
+
+	ring_buffer_put(rb); /* could be last */
 }
 
 static const struct vm_operations_struct perf_mmap_vmops = {
@@ -3691,12 +3767,24 @@ static int perf_mmap(struct file *file, struct vm_area_struct *vma)
 		return -EINVAL;
 
 	WARN_ON_ONCE(event->ctx->parent_ctx);
+again:
 	mutex_lock(&event->mmap_mutex);
 	if (event->rb) {
-		if (event->rb->nr_pages == nr_pages)
-			atomic_inc(&event->rb->refcount);
-		else
+		if (event->rb->nr_pages != nr_pages) {
 			ret = -EINVAL;
+			goto unlock;
+		}
+
+		if (!atomic_inc_not_zero(&event->rb->mmap_count)) {
+			/*
+			 * Raced against perf_mmap_close() through
+			 * perf_event_set_output(). Try again, hope for better
+			 * luck.
+			 */
+			mutex_unlock(&event->mmap_mutex);
+			goto again;
+		}
+
 		goto unlock;
 	}
 
@@ -3737,19 +3825,27 @@ static int perf_mmap(struct file *file, struct vm_area_struct *vma)
 		ret = -ENOMEM;
 		goto unlock;
 	}
-	rcu_assign_pointer(event->rb, rb);
+
+	atomic_set(&rb->mmap_count, 1);
+	rb->mmap_locked = extra;
+	rb->mmap_user = get_current_user();
 
 	atomic_long_add(user_extra, &user->locked_vm);
-	event->mmap_locked = extra;
-	event->mmap_user = get_current_user();
-	vma->vm_mm->pinned_vm += event->mmap_locked;
+	vma->vm_mm->pinned_vm += extra;
+
+	ring_buffer_attach(event, rb);
+	rcu_assign_pointer(event->rb, rb);
 
 unlock:
 	if (!ret)
 		atomic_inc(&event->mmap_count);
 	mutex_unlock(&event->mmap_mutex);
 
-	vma->vm_flags |= VM_RESERVED;
+	/*
+	 * Since pinned accounting is per vm we cannot allow fork() to copy our
+	 * vma.
+	 */
+	vma->vm_flags |= VM_DONTCOPY | VM_RESERVED;
 	vma->vm_ops = &perf_mmap_vmops;
 
 	return ret;
@@ -6114,6 +6210,8 @@ set:
 	if (atomic_read(&event->mmap_count))
 		goto unlock;
 
+	old_rb = event->rb;
+
 	if (output_event) {
 		/* get the rb we want to redirect to */
 		rb = ring_buffer_get(output_event);
@@ -6121,16 +6219,28 @@ set:
 			goto unlock;
 	}
 
-	old_rb = event->rb;
-	rcu_assign_pointer(event->rb, rb);
 	if (old_rb)
 		ring_buffer_detach(event, old_rb);
+
+	if (rb)
+		ring_buffer_attach(event, rb);
+
+	rcu_assign_pointer(event->rb, rb);
+
+	if (old_rb) {
+		ring_buffer_put(old_rb);
+		/*
+		 * Since we detached before setting the new rb, so that we
+		 * could attach the new rb, we could have missed a wakeup.
+		 * Provide it now.
+		 */
+		wake_up_all(&event->waitq);
+	}
+
 	ret = 0;
 unlock:
 	mutex_unlock(&event->mmap_mutex);
 
-	if (old_rb)
-		ring_buffer_put(old_rb);
 out:
 	return ret;
 }
@@ -6797,7 +6907,7 @@ inherit_task_group(struct perf_event *event, struct task_struct *parent,
 		 * child.
 		 */
 
-		child_ctx = alloc_perf_context(event->pmu, child);
+		child_ctx = alloc_perf_context(parent_ctx->pmu, child);
 		if (!child_ctx)
 			return -ENOMEM;
 
diff --git a/kernel/events/hw_breakpoint.c b/kernel/events/hw_breakpoint.c
index b7971d6..98ac24e 100644
--- a/kernel/events/hw_breakpoint.c
+++ b/kernel/events/hw_breakpoint.c
@@ -147,7 +147,7 @@ fetch_bp_busy_slots(struct bp_busy_slots *slots, struct perf_event *bp,
 		return;
 	}
 
-	for_each_online_cpu(cpu) {
+	for_each_possible_cpu(cpu) {
 		unsigned int nr;
 
 		nr = per_cpu(nr_cpu_bp_pinned[type], cpu);
@@ -233,7 +233,7 @@ toggle_bp_slot(struct perf_event *bp, bool enable, enum bp_type_idx type,
 	if (cpu >= 0) {
 		toggle_bp_task_slot(bp, cpu, enable, type, weight);
 	} else {
-		for_each_online_cpu(cpu)
+		for_each_possible_cpu(cpu)
 			toggle_bp_task_slot(bp, cpu, enable, type, weight);
 	}
 
diff --git a/kernel/events/internal.h b/kernel/events/internal.h
index 64568a6..a2101bb 100644
--- a/kernel/events/internal.h
+++ b/kernel/events/internal.h
@@ -26,6 +26,10 @@ struct ring_buffer {
 	spinlock_t			event_lock;
 	struct list_head		event_list;
 
+	atomic_t			mmap_count;
+	unsigned long			mmap_locked;
+	struct user_struct		*mmap_user;
+
 	struct perf_event_mmap_page	*user_page;
 	void				*data_pages[0];
 };
diff --git a/kernel/futex.c b/kernel/futex.c
index 77bccfc..1d0538e 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -60,6 +60,7 @@
 #include <linux/pid.h>
 #include <linux/nsproxy.h>
 #include <linux/ptrace.h>
+#include <linux/hugetlb.h>
 
 #include <asm/futex.h>
 
@@ -363,7 +364,7 @@ again:
 	} else {
 		key->both.offset |= FUT_OFF_INODE; /* inode-based key */
 		key->shared.inode = page_head->mapping->host;
-		key->shared.pgoff = page_head->index;
+		key->shared.pgoff = basepage_index(page);
 	}
 
 	get_futex_key_refs(key);
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index 382a6bd..52bdd58 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -539,9 +539,9 @@ int can_request_irq(unsigned int irq, unsigned long irqflags)
 		return 0;
 
 	if (irq_settings_can_request(desc)) {
-		if (desc->action)
-			if (irqflags & desc->action->flags & IRQF_SHARED)
-				canrequest =1;
+		if (!desc->action ||
+		    irqflags & desc->action->flags & IRQF_SHARED)
+			canrequest = 1;
 	}
 	irq_put_desc_unlock(desc, flags);
 	return canrequest;
diff --git a/kernel/printk.c b/kernel/printk.c
index c0d12ea..16688ec 100644
--- a/kernel/printk.c
+++ b/kernel/printk.c
@@ -813,9 +813,9 @@ static int console_trylock_for_printk(unsigned int cpu)
 		}
 	}
 	printk_cpu = UINT_MAX;
+	raw_spin_unlock(&logbuf_lock);
 	if (wake)
 		up(&console_sem);
-	raw_spin_unlock(&logbuf_lock);
 	return retval;
 }
 static const char recursion_bug_msg [] =
diff --git a/kernel/timer.c b/kernel/timer.c
index f2f71d7..f8b05a4 100644
--- a/kernel/timer.c
+++ b/kernel/timer.c
@@ -145,9 +145,11 @@ static unsigned long round_jiffies_common(unsigned long j, int cpu,
 	/* now that we have rounded, subtract the extra skew again */
 	j -= cpu * 3;
 
-	if (j <= jiffies) /* rounding ate our timeout entirely; */
-		return original;
-	return j;
+	/*
+	 * Make sure j is still in the future. Otherwise return the
+	 * unmodified value.
+	 */
+	return time_is_after_jiffies(j) ? j : original;
 }
 
 /**
diff --git a/kernel/trace/trace_syscalls.c b/kernel/trace/trace_syscalls.c
index cb65454..7c75bbb 100644
--- a/kernel/trace/trace_syscalls.c
+++ b/kernel/trace/trace_syscalls.c
@@ -303,6 +303,8 @@ void ftrace_syscall_enter(void *ignore, struct pt_regs *regs, long id)
 	struct syscall_metadata *sys_data;
 	struct ring_buffer_event *event;
 	struct ring_buffer *buffer;
+	unsigned long irq_flags;
+	int pc;
 	int size;
 	int syscall_nr;
 
@@ -318,8 +320,11 @@ void ftrace_syscall_enter(void *ignore, struct pt_regs *regs, long id)
 
 	size = sizeof(*entry) + sizeof(unsigned long) * sys_data->nb_args;
 
+	local_save_flags(irq_flags);
+	pc = preempt_count();
+
 	event = trace_current_buffer_lock_reserve(&buffer,
-			sys_data->enter_event->event.type, size, 0, 0);
+			sys_data->enter_event->event.type, size, irq_flags, pc);
 	if (!event)
 		return;
 
@@ -329,7 +334,8 @@ void ftrace_syscall_enter(void *ignore, struct pt_regs *regs, long id)
 
 	if (!filter_current_check_discard(buffer, sys_data->enter_event,
 					  entry, event))
-		trace_current_buffer_unlock_commit(buffer, event, 0, 0);
+		trace_current_buffer_unlock_commit(buffer, event,
+						   irq_flags, pc);
 }
 
 void ftrace_syscall_exit(void *ignore, struct pt_regs *regs, long ret)
@@ -338,6 +344,8 @@ void ftrace_syscall_exit(void *ignore, struct pt_regs *regs, long ret)
 	struct syscall_metadata *sys_data;
 	struct ring_buffer_event *event;
 	struct ring_buffer *buffer;
+	unsigned long irq_flags;
+	int pc;
 	int syscall_nr;
 
 	syscall_nr = syscall_get_nr(current, regs);
@@ -350,8 +358,12 @@ void ftrace_syscall_exit(void *ignore, struct pt_regs *regs, long ret)
 	if (!sys_data)
 		return;
 
+	local_save_flags(irq_flags);
+	pc = preempt_count();
+
 	event = trace_current_buffer_lock_reserve(&buffer,
-			sys_data->exit_event->event.type, sizeof(*entry), 0, 0);
+			sys_data->exit_event->event.type, sizeof(*entry),
+			irq_flags, pc);
 	if (!event)
 		return;
 
@@ -361,7 +373,8 @@ void ftrace_syscall_exit(void *ignore, struct pt_regs *regs, long ret)
 
 	if (!filter_current_check_discard(buffer, sys_data->exit_event,
 					  entry, event))
-		trace_current_buffer_unlock_commit(buffer, event, 0, 0);
+		trace_current_buffer_unlock_commit(buffer, event,
+						   irq_flags, pc);
 }
 
 int reg_event_syscall_enter(struct ftrace_event_call *call)
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index 2dcd716..ddf2128 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -679,6 +679,23 @@ int PageHuge(struct page *page)
 }
 EXPORT_SYMBOL_GPL(PageHuge);
 
+pgoff_t __basepage_index(struct page *page)
+{
+	struct page *page_head = compound_head(page);
+	pgoff_t index = page_index(page_head);
+	unsigned long compound_idx;
+
+	if (!PageHuge(page_head))
+		return page_index(page);
+
+	if (compound_order(page_head) >= MAX_ORDER)
+		compound_idx = page_to_pfn(page) - page_to_pfn(page_head);
+	else
+		compound_idx = page - page_head;
+
+	return (index << compound_order(page_head)) + compound_idx;
+}
+
 static struct page *alloc_fresh_huge_page_node(struct hstate *h, int nid)
 {
 	struct page *page;
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index a0b6c50..dd7c019 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -1737,6 +1737,9 @@ static struct sk_buff *l2cap_build_cmd(struct l2cap_conn *conn,
 	BT_DBG("conn %p, code 0x%2.2x, ident 0x%2.2x, len %d",
 			conn, code, ident, dlen);
 
+	if (conn->mtu < L2CAP_HDR_SIZE + L2CAP_CMD_HDR_SIZE)
+		return NULL;
+
 	len = L2CAP_HDR_SIZE + L2CAP_CMD_HDR_SIZE + dlen;
 	count = min_t(unsigned int, conn->mtu, len);
 
@@ -2865,7 +2868,7 @@ static inline int l2cap_information_rsp(struct l2cap_conn *conn,
 	struct l2cap_info_rsp *rsp = (struct l2cap_info_rsp *) data;
 	u16 type, result;
 
-	if (cmd_len != sizeof(*rsp))
+	if (cmd_len < sizeof(*rsp))
 		return -EPROTO;
 
 	type   = __le16_to_cpu(rsp->type);
diff --git a/net/ceph/auth_none.c b/net/ceph/auth_none.c
index 214c2bb..9f78c5f 100644
--- a/net/ceph/auth_none.c
+++ b/net/ceph/auth_none.c
@@ -39,6 +39,11 @@ static int should_authenticate(struct ceph_auth_client *ac)
 	return xi->starting;
 }
 
+static int build_request(struct ceph_auth_client *ac, void *buf, void *end)
+{
+	return 0;
+}
+
 /*
  * the generic auth code decode the global_id, and we carry no actual
  * authenticate state, so nothing happens here.
@@ -107,6 +112,7 @@ static const struct ceph_auth_client_ops ceph_auth_none_ops = {
 	.destroy = destroy,
 	.is_authenticated = is_authenticated,
 	.should_authenticate = should_authenticate,
+	.build_request = build_request,
 	.handle_reply = handle_reply,
 	.create_authorizer = ceph_auth_none_create_authorizer,
 	.destroy_authorizer = ceph_auth_none_destroy_authorizer,
diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index 3c8bc6e..d148a2b 100644
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -902,7 +902,7 @@ static int hdmi_pcm_open(struct hda_pcm_stream *hinfo,
 	per_cvt->assigned = 1;
 	hinfo->nid = per_cvt->cvt_nid;
 
-	snd_hda_codec_write(codec, per_pin->pin_nid, 0,
+	snd_hda_codec_write_cache(codec, per_pin->pin_nid, 0,
 			    AC_VERB_SET_CONNECT_SEL,
 			    mux_idx);
 	snd_hda_spdif_ctls_assign(codec, pin_idx, per_cvt->cvt_nid);
diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c
index e97df24..8b687da 100644
--- a/sound/soc/codecs/wm8962.c
+++ b/sound/soc/codecs/wm8962.c
@@ -2117,7 +2117,6 @@ static int wm8962_put_hp_sw(struct snd_kcontrol *kcontrol,
 			    struct snd_ctl_elem_value *ucontrol)
 {
 	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
-	u16 *reg_cache = codec->reg_cache;
 	int ret;
 
 	/* Apply the update (if any) */
@@ -2126,16 +2125,19 @@ static int wm8962_put_hp_sw(struct snd_kcontrol *kcontrol,
 		return 0;
 
 	/* If the left PGA is enabled hit that VU bit... */
-	if (snd_soc_read(codec, WM8962_PWR_MGMT_2) & WM8962_HPOUTL_PGA_ENA)
-		return snd_soc_write(codec, WM8962_HPOUTL_VOLUME,
-				     reg_cache[WM8962_HPOUTL_VOLUME]);
+	ret = snd_soc_read(codec, WM8962_PWR_MGMT_2);
+	if (ret & WM8962_HPOUTL_PGA_ENA) {
+		snd_soc_write(codec, WM8962_HPOUTL_VOLUME,
+			      snd_soc_read(codec, WM8962_HPOUTL_VOLUME));
+		return 1;
+	}
 
 	/* ...otherwise the right.  The VU is stereo. */
-	if (snd_soc_read(codec, WM8962_PWR_MGMT_2) & WM8962_HPOUTR_PGA_ENA)
-		return snd_soc_write(codec, WM8962_HPOUTR_VOLUME,
-				     reg_cache[WM8962_HPOUTR_VOLUME]);
+	if (ret & WM8962_HPOUTR_PGA_ENA)
+		snd_soc_write(codec, WM8962_HPOUTR_VOLUME,
+			      snd_soc_read(codec, WM8962_HPOUTR_VOLUME));
 
-	return 0;
+	return 1;
 }
 
 /* The VU bits for the speakers are in a different register to the mute
@@ -3944,7 +3946,6 @@ static int wm8962_probe(struct snd_soc_codec *codec)
 	int ret;
 	struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
 	struct wm8962_pdata *pdata = dev_get_platdata(codec->dev);
-	u16 *reg_cache = codec->reg_cache;
 	int i, trigger, irq_pol;
 	bool dmicclk, dmicdat;
 
@@ -4055,8 +4056,9 @@ static int wm8962_probe(struct snd_soc_codec *codec)
 
 		/* Put the speakers into mono mode? */
 		if (pdata->spk_mono)
-			reg_cache[WM8962_CLASS_D_CONTROL_2]
-				|= WM8962_SPK_MONO;
+			snd_soc_update_bits(codec, WM8962_CLASS_D_CONTROL_2,
+				WM8962_SPK_MONO_MASK, WM8962_SPK_MONO);
+
 
 		/* Micbias setup, detection enable and detection
 		 * threasholds. */

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]

Re: [40/85] net/tg3: Avoid delay during MMIO access

[Luis Henriques]

Ben Hutchings <ben@decadent.org.uk> writes:

> 3.2.49-rc1 review patch.  If anyone has any objections, please let me know.
>
> ------------------
>
> From: Gavin Shan <shangw@linux.vnet.ibm.com>
>
> commit 6d446ec32f169c6a5d9bc90684a8082a6cbe90f6 upstream.
>
> When the EEH error is the result of a fenced host bridge, MMIO accesses
> can be very slow (milliseconds) to timeout and return all 1's,
> thus causing the driver various timeout loops to take way too long and
> trigger soft-lockup warnings (in addition to taking minutes to recover).
>
> It might be worthwhile to check if for any of these cases, ffffffff is
> a valid possible value, and if not, bail early since that means the HW
> is either gone or isolated. In the meantime, checking that the PCI channel
> is offline would be workaround of the problem.
>
> Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
> Signed-off-by: David S. Miller <davem@davemloft.net>
> [bwh: Backported to 3.2: adjust context, indentation]
> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
> ---
>  drivers/net/ethernet/broadcom/tg3.c | 36 ++++++++++++++++++++++++++++++++++++
>  1 file changed, 36 insertions(+)
>
> --- a/drivers/net/ethernet/broadcom/tg3.c
> +++ b/drivers/net/ethernet/broadcom/tg3.c
> @@ -688,6 +688,9 @@ static int tg3_ape_lock(struct tg3 *tp,
>  		status = tg3_ape_read32(tp, gnt + off);
>  		if (status == bit)
>  			break;
> +		if (pci_channel_offline(tp->pdev))
> +			break;
> +
>  		udelay(10);
>  	}
>  
> @@ -1465,6 +1468,9 @@ static void tg3_wait_for_event_ack(struc
>  	for (i = 0; i < delay_cnt; i++) {
>  		if (!(tr32(GRC_RX_CPU_EVENT) & GRC_RX_CPU_DRIVER_EVENT))
>  			break;
> +		if (pci_channel_offline(tp->pdev))
> +			break;
> +
>  		udelay(8);
>  	}
>  }
> @@ -1628,6 +1634,9 @@ static int tg3_poll_fw(struct tg3 *tp)
>  		for (i = 0; i < 200; i++) {
>  			if (tr32(VCPU_STATUS) & VCPU_STATUS_INIT_DONE)
>  				return 0;
> +			if (pci_channel_offline(tp->pdev))
> +				return -ENODEV;
> +
>  			udelay(100);
>  		}
>  		return -ENODEV;
> @@ -1638,6 +1647,15 @@ static int tg3_poll_fw(struct tg3 *tp)
>  		tg3_read_mem(tp, NIC_SRAM_FIRMWARE_MBOX, &val);
>  		if (val == ~NIC_SRAM_FIRMWARE_MBOX_MAGIC1)
>  			break;
> +		if (pci_channel_offline(tp->pdev)) {
> +			if (!tg3_flag(tp, NO_FWARE_REPORTED)) {
> +				tg3_flag_set(tp, NO_FWARE_REPORTED);
> +				netdev_info(tp->dev, "No firmware running\n");
> +			}
> +
> +			break;
> +		}
> +
>  		udelay(10);
>  	}
>  
> @@ -3067,6 +3085,10 @@ static int tg3_halt_cpu(struct tg3 *tp,
>  			tw32(offset + CPU_MODE,  CPU_MODE_HALT);
>  			if (tr32(offset + CPU_MODE) & CPU_MODE_HALT)
>  				break;
> +			if (pci_channel_offline(tp->pdev))
> +				return -EBUSY;
> +			if (pci_channel_offline(tp->pdev))
> +				return -EBUSY;
>  		}

I believe you didn't want to have these two invocations to the
pci_channel_offline() function.  i guess you wanted to have one of
these moved to the other branch of the 'if' statement.

[ btw, I've just replied to an email by David S. Miller about his
  backport to 3.4 (and 3.2) of this commit. ]

Cheers,
-- 
Luis


>  
>  		tw32(offset + CPU_STATE, 0xffffffff); @@ -7569,6
> +7591,14 @@ static int tg3_stop_block(struct tg3 *tp tw32_f(ofs,
> val);
>  
>  	for (i = 0; i < MAX_WAIT_CNT; i++) {
> +		if (pci_channel_offline(tp->pdev)) {
> +			dev_err(&tp->pdev->dev,
> +				"tg3_stop_block device offline, "
> +				"ofs=%lx enable_bit=%x\n",
> +				ofs, enable_bit);
> +			return -ENODEV;
> +		}
> +
>  		udelay(100);
>  		val = tr32(ofs);
>  		if ((val & enable_bit) == 0)
> @@ -7592,6 +7622,13 @@ static int tg3_abort_hw(struct tg3 *tp,
>  
>  	tg3_disable_ints(tp);
>  
> +	if (pci_channel_offline(tp->pdev)) {
> +		tp->rx_mode &= ~(RX_MODE_ENABLE | TX_MODE_ENABLE);
> +		tp->mac_mode &= ~MAC_MODE_TDE_ENABLE;
> +		err = -ENODEV;
> +		goto err_no_dev;
> +	}
> +
>  	tp->rx_mode &= ~RX_MODE_ENABLE;
>  	tw32_f(MAC_RX_MODE, tp->rx_mode);
>  	udelay(10);
> @@ -7640,6 +7677,7 @@ static int tg3_abort_hw(struct tg3 *tp,
>  	err |= tg3_stop_block(tp, BUFMGR_MODE, BUFMGR_MODE_ENABLE, silent);
>  	err |= tg3_stop_block(tp, MEMARB_MODE, MEMARB_MODE_ENABLE, silent);
>  
> +err_no_dev:
>  	for (i = 0; i < tp->irq_cnt; i++) {
>  		struct tg3_napi *tnapi = &tp->napi[i];
>  		if (tnapi->hw_status)
>
> --
> To unsubscribe from this list: send the line "unsubscribe stable" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [40/85] net/tg3: Avoid delay during MMIO access

[David Miller]

From: Luis Henriques <luis.henriques@canonical.com>
Date: Wed, 24 Jul 2013 17:42:04 +0100

> I believe you didn't want to have these two invocations to the
> pci_channel_offline() function.  i guess you wanted to have one of
> these moved to the other branch of the 'if' statement.
> 
> [ btw, I've just replied to an email by David S. Miller about his
>   backport to 3.4 (and 3.2) of this commit. ]

Yes, indeed, both of these backports were done incorrectly.

Re: [40/85] net/tg3: Avoid delay during MMIO access

[David Miller]

From: David Miller <davem@davemloft.net>
Date: Wed, 24 Jul 2013 12:45:04 -0700 (PDT)

> From: Luis Henriques <luis.henriques@canonical.com>
> Date: Wed, 24 Jul 2013 17:42:04 +0100
> 
>> I believe you didn't want to have these two invocations to the
>> pci_channel_offline() function.  i guess you wanted to have one of
>> these moved to the other branch of the 'if' statement.
>> 
>> [ btw, I've just replied to an email by David S. Miller about his
>>   backport to 3.4 (and 3.2) of this commit. ]
> 
> Yes, indeed, both of these backports were done incorrectly.

Greg/Ben, please drop the tg3 patch of my networking bits from your
queues, I'll send a fixed up version soon.

Thanks.

Re: [40/85] net/tg3: Avoid delay during MMIO access

[Ben Hutchings]

[-- Attachment #1: Type: text/plain, Size: 1398 bytes --]

On Wed, 2013-07-24 at 17:42 +0100, Luis Henriques wrote:
> Ben Hutchings <ben@decadent.org.uk> writes:
> 
> > 3.2.49-rc1 review patch.  If anyone has any objections, please let me know.
> >
> > ------------------
> >
> > From: Gavin Shan <shangw@linux.vnet.ibm.com>
> >
> > commit 6d446ec32f169c6a5d9bc90684a8082a6cbe90f6 upstream.
[...]
> > @@ -3067,6 +3085,10 @@ static int tg3_halt_cpu(struct tg3 *tp,
> >  			tw32(offset + CPU_MODE,  CPU_MODE_HALT);
> >  			if (tr32(offset + CPU_MODE) & CPU_MODE_HALT)
> >  				break;
> > +			if (pci_channel_offline(tp->pdev))
> > +				return -EBUSY;
> > +			if (pci_channel_offline(tp->pdev))
> > +				return -EBUSY;
> >  		}
> 
> I believe you didn't want to have these two invocations to the
> pci_channel_offline() function.  i guess you wanted to have one of
> these moved to the other branch of the 'if' statement.

Indeed, and I've dropped this patch.  This was partly due to a bug in
the patch command.  If there are two consecutive hunks which only insert
lines and have the same context, and it can only find one match for the
context, it will apply both insertions in the same place.

Ben.

> [ btw, I've just replied to an email by David S. Miller about his
>   backport to 3.4 (and 3.2) of this commit. ]
> 
> Cheers,

-- 
Ben Hutchings
Once a job is fouled up, anything done to improve it makes it worse.

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]

Re: [40/85] net/tg3: Avoid delay during MMIO access

[Ben Hutchings]

[-- Attachment #1: Type: text/plain, Size: 946 bytes --]

On Wed, 2013-07-24 at 14:09 -0700, David Miller wrote:
> From: David Miller <davem@davemloft.net>
> Date: Wed, 24 Jul 2013 12:45:04 -0700 (PDT)
> 
> > From: Luis Henriques <luis.henriques@canonical.com>
> > Date: Wed, 24 Jul 2013 17:42:04 +0100
> > 
> >> I believe you didn't want to have these two invocations to the
> >> pci_channel_offline() function.  i guess you wanted to have one of
> >> these moved to the other branch of the 'if' statement.
> >> 
> >> [ btw, I've just replied to an email by David S. Miller about his
> >>   backport to 3.4 (and 3.2) of this commit. ]
> > 
> > Yes, indeed, both of these backports were done incorrectly.
> 
> Greg/Ben, please drop the tg3 patch of my networking bits from your
> queues, I'll send a fixed up version soon.

It's not in the queue yet, but I'll remember not to add it.

Ben.

-- 
Ben Hutchings
Once a job is fouled up, anything done to improve it makes it worse.

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]

Re: [63/85] Input: bcm5974 - add support for the 2013 MacBook Air

[rydberg]

Hi Ben,

> 3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

Unfortunately, kernels before 3.7 are missing a patch needed for this
to work. As is, the driver will crash during urb setup because the bt
endpoint no longer exists. Therefore, please remove this patch from
the 3.2 queue.

Thanks,
Henrik

Re: [62/85] HID: apple: Add support for the 2013 Macbook Air

[rydberg]

Hi Ben,

> 3.2.49-rc1 review patch.  If anyone has any objections, please let me know.

Because the bcm5974 patch is unsuitable for pre-3.7 kernels, this one
is unsuitable as well; it renders the trackpad unusable. Without this
patch, we at least have one-finger mouse emulation, so, please remove
from the queue.

Thanks,
Henrik

Re: [40/85] net/tg3: Avoid delay during MMIO access

[Greg KH]

On Wed, Jul 24, 2013 at 02:09:07PM -0700, David Miller wrote:
> From: David Miller <davem@davemloft.net>
> Date: Wed, 24 Jul 2013 12:45:04 -0700 (PDT)
> 
> > From: Luis Henriques <luis.henriques@canonical.com>
> > Date: Wed, 24 Jul 2013 17:42:04 +0100
> > 
> >> I believe you didn't want to have these two invocations to the
> >> pci_channel_offline() function.  i guess you wanted to have one of
> >> these moved to the other branch of the 'if' statement.
> >> 
> >> [ btw, I've just replied to an email by David S. Miller about his
> >>   backport to 3.4 (and 3.2) of this commit. ]
> > 
> > Yes, indeed, both of these backports were done incorrectly.
> 
> Greg/Ben, please drop the tg3 patch of my networking bits from your
> queues, I'll send a fixed up version soon.

Now dropped from my 3.4-stable queue, thanks.

greg k-h

Re: [62/85] HID: apple: Add support for the 2013 Macbook Air

[Ben Hutchings]

[-- Attachment #1: Type: text/plain, Size: 549 bytes --]

On Thu, 2013-07-25 at 08:50 +0200, rydberg@euromail.se wrote:
> Hi Ben,
> 
> > 3.2.49-rc1 review patch.  If anyone has any objections, please let me know.
> 
> Because the bcm5974 patch is unsuitable for pre-3.7 kernels, this one
> is unsuitable as well; it renders the trackpad unusable. Without this
> patch, we at least have one-finger mouse emulation, so, please remove
> from the queue.

That's a pity.  I'll drop them both, thanks.

Ben.

-- 
Ben Hutchings
Once a job is fouled up, anything done to improve it makes it worse.

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]

Re: [16/85] b43: ensue that BCMA is "y" when B43 is "y"

[Steven Rostedt]

On Wed, Jul 24, 2013 at 03:02:45PM +0100, Ben Hutchings wrote:
> 3.2.49-rc1 review patch.  If anyone has any objections, please let me know.
> 
> ------------------
> 
> From: Hauke Mehrtens <hauke@hauke-m.de>
> 
> commit 693026ef2e751fd94d2e6c71028e68343cc875d5 upstream.
> 
> When b43 gets build into the kernel and it should use bcma we have to
> ensure that bcma was also build into the kernel and not as a module.
> In this patch this is also done for SSB, although you can not
> build b43 without ssb support for now.
> 
> This fixes a build problem reported by Randy Dunlap in
> 5187EB95.2060605@infradead.org

Hauke,

Just an FYI, if you find yourself adding message id's as references in
git commits, use the following tag:

Link: http://lkml.kernel.org/r/5187EB95.2060605@infradead.org

-- Steve

> 
> Reported-By: Randy Dunlap <rdunlap@infradead.org>
> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
> Signed-off-by: John W. Linville <linville@tuxdriver.com>
> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
> ---
>  drivers/net/wireless/b43/Kconfig | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> --- a/drivers/net/wireless/b43/Kconfig
> +++ b/drivers/net/wireless/b43/Kconfig
> @@ -28,12 +28,12 @@ config B43
>  
>  config B43_BCMA
>  	bool "Support for BCMA bus"
> -	depends on B43 && BCMA
> +	depends on B43 && (BCMA = y || BCMA = B43)
>  	default y
>  
>  config B43_SSB
>  	bool
> -	depends on B43 && SSB
> +	depends on B43 && (SSB = y || SSB = B43)
>  	default y
>  
>  # Auto-select SSB PCI-HOST support, if possible
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/

Re: [16/85] b43: ensue that BCMA is "y" when B43 is "y"

[Ben Hutchings]

On Mon, Sep 09, 2013 at 02:01:15PM -0400, Steven Rostedt wrote:
> On Wed, Jul 24, 2013 at 03:02:45PM +0100, Ben Hutchings wrote:
> > 3.2.49-rc1 review patch.  If anyone has any objections, please let me know.
> > 
> > ------------------
> > 
> > From: Hauke Mehrtens <hauke@hauke-m.de>
> > 
> > commit 693026ef2e751fd94d2e6c71028e68343cc875d5 upstream.
> > 
> > When b43 gets build into the kernel and it should use bcma we have to
> > ensure that bcma was also build into the kernel and not as a module.
> > In this patch this is also done for SSB, although you can not
> > build b43 without ssb support for now.
> > 
> > This fixes a build problem reported by Randy Dunlap in
> > 5187EB95.2060605@infradead.org
> 
> Hauke,
> 
> Just an FYI, if you find yourself adding message id's as references in
> git commits, use the following tag:
> 
> Link: http://lkml.kernel.org/r/5187EB95.2060605@infradead.org
[...]

http://mid.gmane.org sucks less (most of the time).

Ben.

-- 
Ben Hutchings
We get into the habit of living before acquiring the habit of thinking.
                                                              - Albert Camus

Re: [16/85] b43: ensue that BCMA is "y" when B43 is "y"

[Steven Rostedt]

On Mon, 9 Sep 2013 19:39:04 +0100
Ben Hutchings <ben@decadent.org.uk> wrote:

> On Mon, Sep 09, 2013 at 02:01:15PM -0400, Steven Rostedt wrote:
> > On Wed, Jul 24, 2013 at 03:02:45PM +0100, Ben Hutchings wrote:
> > > 3.2.49-rc1 review patch.  If anyone has any objections, please let me know.
> > > 
> > > ------------------
> > > 
> > > From: Hauke Mehrtens <hauke@hauke-m.de>
> > > 
> > > commit 693026ef2e751fd94d2e6c71028e68343cc875d5 upstream.
> > > 
> > > When b43 gets build into the kernel and it should use bcma we have to
> > > ensure that bcma was also build into the kernel and not as a module.
> > > In this patch this is also done for SSB, although you can not
> > > build b43 without ssb support for now.
> > > 
> > > This fixes a build problem reported by Randy Dunlap in
> > > 5187EB95.2060605@infradead.org
> > 
> > Hauke,
> > 
> > Just an FYI, if you find yourself adding message id's as references in
> > git commits, use the following tag:
> > 
> > Link: http://lkml.kernel.org/r/5187EB95.2060605@infradead.org
> [...]
> 
> http://mid.gmane.org sucks less (most of the time).

Initially, LKML would be archived on kernel.org, but that never
happened and doesn't seem it will after the whole security breach
incident.

But if mid.gname.org is a better link to forward to, then perhaps
Konstantin could update it.

In any case, as I would think kernel.org will be around as long as
Linux is still in use, having the link go to kernel.org, and then
kernel.org could point the result to where ever it liked, is still the
best option.

-- Steve

Re: [16/85] b43: ensue that BCMA is "y" when B43 is "y"

[Konstantin Ryabitsev]

[-- Attachment #1: Type: text/plain, Size: 1824 bytes --]

On 09/09/13 02:46 PM, Steven Rostedt wrote:
> Initially, LKML would be archived on kernel.org, but that never
> happened and doesn't seem it will after the whole security breach
> incident.

I believe we're hoping vger will eventually start doing it on its own. :)

We do archive some of it as part of patchwork, but only actual patches.

> But if mid.gname.org is a better link to forward to, then perhaps
> Konstantin could update it.

If it's the general community opinion, I can easily change that. The
trouble is, "sucks less (most of the time)" is a subjective opinion that
may not necessarily be shared by others. :) I have to be very careful
changing such tools, as someone's workflow may be disrupted by the change.

Therefore, for now I leave /r/ as-is, but you can use /g/ to direct to
gmane instead of marc.info:

http://lkml.kernel.org/g/5187EB95.2060605@infradead.org

Even further, if the message contained a patch, you can use '/p/' to
refer to it:

http://lkml.kernel.org/p/20130909183608.GR13318@ZenIV.linux.org.uk

You can just use that instead of /g/, since if a matching patchwork
patch is not found, it'll fallback mid.gmane.org. E.g., this message
does not have a patch, so no patchwork entry:

http://lkml.kernel.org/p/5187EB95.2060605@infradead.org

> In any case, as I would think kernel.org will be around as long as
> Linux is still in use, having the link go to kernel.org, and then
> kernel.org could point the result to where ever it liked, is still the
> best option.

Yes, do use lkml.kernel.org for this. If either marc.info or
mid.gmane.org go away, we'll find some other places to redirect without
losing historical context.

Best,
-- 
Konstantin Ryabitsev
Senior Systems Administrator
Linux Foundation Collab Projects
Montréal, Québec


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 730 bytes --]

Re: [16/85] b43: ensue that BCMA is "y" when B43 is "y"

[Ben Hutchings]

[-- Attachment #1: Type: text/plain, Size: 1128 bytes --]

On Mon, 2013-09-09 at 16:56 -0400, Konstantin Ryabitsev wrote:
> On 09/09/13 02:46 PM, Steven Rostedt wrote:
> > Initially, LKML would be archived on kernel.org, but that never
> > happened and doesn't seem it will after the whole security breach
> > incident.
> 
> I believe we're hoping vger will eventually start doing it on its own. :)
> 
> We do archive some of it as part of patchwork, but only actual patches.
> 
> > But if mid.gname.org is a better link to forward to, then perhaps
> > Konstantin could update it.
> 
> If it's the general community opinion, I can easily change that. The
> trouble is, "sucks less (most of the time)" is a subjective opinion that
> may not necessarily be shared by others. :) I have to be very careful
> changing such tools, as someone's workflow may be disrupted by the change.
> 
> Therefore, for now I leave /r/ as-is, but you can use /g/ to direct to
> gmane instead of marc.info:
> 
> http://lkml.kernel.org/g/5187EB95.2060605@infradead.org
[...]

Thanks!

Ben.

-- 
Ben Hutchings
If more than one person is responsible for a bug, no one is at fault.

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]